904 lines
36 KiB
Plaintext
904 lines
36 KiB
Plaintext
|
IANA-MAU-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-IDENTITY, mib-2
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
TEXTUAL-CONVENTION
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
;
|
||
|
|
|
||
|
|
ianaMauMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201002230000Z" -- February 23, 2010
|
||
|
|
ORGANIZATION "IANA"
|
||
|
|
CONTACT-INFO " Internet Assigned Numbers Authority
|
||
|
|
|
||
|
|
Postal: ICANN
|
||
|
|
4676 Admiralty Way, Suite 330
|
||
|
|
Marina del Rey, CA 90292
|
||
|
|
|
||
|
|
Tel: +1-310-823-9358
|
||
|
|
EMail: iana&iana.org"
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB module defines dot3MauType OBJECT-IDENTITIES and
|
||
|
|
IANAifMauListBits, IANAifMauMediaAvailable,
|
||
|
|
IANAifMauAutoNegCapBits, and IANAifJackType
|
||
|
|
|
||
|
|
TEXTUAL-CONVENTIONs, specifying enumerated values of the
|
||
|
|
ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable,
|
||
|
|
ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits /
|
||
|
|
ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects
|
||
|
|
respectively, defined in the MAU-MIB.
|
||
|
|
|
||
|
|
It is intended that each new MAU type, Media Availability
|
||
|
|
state, Auto Negotiation capability and/or Jack type defined by
|
||
|
|
the IEEE 802.3 working group and approved for publication in a
|
||
|
|
revision of IEEE Std 802.3 will be added to this MIB module,
|
||
|
|
provided that it is suitable for being managed by the base
|
||
|
|
objects in the MAU-MIB. An Expert Review, as defined in
|
||
|
|
RFC 2434 [RFC2434], is REQUIRED for such additions.
|
||
|
|
|
||
|
|
The following reference is used throughout this MIB module:
|
||
|
|
|
||
|
|
[IEEE802.3] refers to:
|
||
|
|
IEEE Std 802.3, 2005 Edition: 'IEEE Standard for
|
||
|
|
Information technology - Telecommunications and information
|
||
|
|
exchange between systems - Local and metropolitan area
|
||
|
|
networks - Specific requirements -
|
||
|
|
Part 3: Carrier sense multiple access with collision
|
||
|
|
detection (CSMA/CD) access method and physical layer
|
||
|
|
specifications'.
|
||
|
|
|
||
|
|
This reference should be updated as appropriate when new
|
||
|
|
MAU types, Media Availability states, Auto Negotiation
|
||
|
|
capabilities, and/or Jack types are added to this MIB module.
|
||
|
|
|
||
|
|
Copyright (C) The IETF Trust (2007).
|
||
|
|
The initial version of this MIB module was published in
|
||
|
|
RFC 4836; for full legal notices see the RFC itself.
|
||
|
|
Supplementary information may be available at:
|
||
|
|
http://www.ietf.org/copyrights/ianamib.html"
|
||
|
|
|
||
|
|
REVISION "201002230000Z" -- February 23, 2010
|
||
|
|
DESCRIPTION "Added assignments that will be included in
|
||
|
|
Clause 14 of IEEE P802.3.1."
|
||
|
|
|
||
|
|
REVISION "200704210000Z" -- April 21, 2007
|
||
|
|
DESCRIPTION "Initial version of this MIB as published in
|
||
|
|
RFC 4836."
|
||
|
|
|
||
|
|
::= { mib-2 154 }
|
||
|
|
|
||
|
|
-- Textual Conventions
|
||
|
|
|
||
|
|
IANAifMauTypeListBits ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This data type is used as the syntax of the ifMauTypeListBits
|
||
|
|
object in the (updated) definition of MAU-MIB's ifMauTable.
|
||
|
|
|
||
|
|
The most recent version of this textual convention is available
|
||
|
|
in the online version of this MIB module on the IANA web site.
|
||
|
|
|
||
|
|
Requests for new values should be made to IANA via email
|
||
|
|
(iana&iana.org).
|
||
|
|
|
||
|
|
Note that changes in this textual convention SHALL be
|
||
|
|
synchronized with relevant changes in the dot3MauType
|
||
|
|
OBJECT-IDENTITIES."
|
||
|
|
REFERENCE
|
||
|
|
"[IEEE802.3], Section 30.5.1.1.2"
|
||
|
|
SYNTAX BITS {
|
||
|
|
bOther(0), -- other or unknown
|
||
|
|
bAUI(1), -- AUI
|
||
|
|
b10base5(2), -- 10BASE-5
|
||
|
|
bFoirl(3), -- FOIRL
|
||
|
|
|
||
|
|
b10base2(4), -- 10BASE-2
|
||
|
|
b10baseT(5), -- 10BASE-T duplex mode unknown
|
||
|
|
b10baseFP(6), -- 10BASE-FP
|
||
|
|
b10baseFB(7), -- 10BASE-FB
|
||
|
|
b10baseFL(8), -- 10BASE-FL duplex mode unknown
|
||
|
|
b10broad36(9), -- 10BROAD36
|
||
|
|
b10baseTHD(10), -- 10BASE-T half duplex mode
|
||
|
|
b10baseTFD(11), -- 10BASE-T full duplex mode
|
||
|
|
b10baseFLHD(12), -- 10BASE-FL half duplex mode
|
||
|
|
b10baseFLFD(13), -- 10BASE-FL full duplex mode
|
||
|
|
b100baseT4(14), -- 100BASE-T4
|
||
|
|
b100baseTXHD(15), -- 100BASE-TX half duplex mode
|
||
|
|
b100baseTXFD(16), -- 100BASE-TX full duplex mode
|
||
|
|
b100baseFXHD(17), -- 100BASE-FX half duplex mode
|
||
|
|
b100baseFXFD(18), -- 100BASE-FX full duplex mode
|
||
|
|
b100baseT2HD(19), -- 100BASE-T2 half duplex mode
|
||
|
|
b100baseT2FD(20), -- 100BASE-T2 full duplex mode
|
||
|
|
|
||
|
|
b1000baseXHD(21), -- 1000BASE-X half duplex mode
|
||
|
|
b1000baseXFD(22), -- 1000BASE-X full duplex mode
|
||
|
|
b1000baseLXHD(23), -- 1000BASE-LX half duplex mode
|
||
|
|
b1000baseLXFD(24), -- 1000BASE-LX full duplex mode
|
||
|
|
b1000baseSXHD(25), -- 1000BASE-SX half duplex mode
|
||
|
|
b1000baseSXFD(26), -- 1000BASE-SX full duplex mode
|
||
|
|
b1000baseCXHD(27), -- 1000BASE-CX half duplex mode
|
||
|
|
b1000baseCXFD(28), -- 1000BASE-CX full duplex mode
|
||
|
|
b1000baseTHD(29), -- 1000BASE-T half duplex mode
|
||
|
|
b1000baseTFD(30), -- 1000BASE-T full duplex mode
|
||
|
|
|
||
|
|
b10GbaseX(31), -- 10GBASE-X
|
||
|
|
b10GbaseLX4(32), -- 10GBASE-LX4
|
||
|
|
|
||
|
|
b10GbaseR(33), -- 10GBASE-R
|
||
|
|
b10GbaseER(34), -- 10GBASE-ER
|
||
|
|
b10GbaseLR(35), -- 10GBASE-LR
|
||
|
|
b10GbaseSR(36), -- 10GBASE-SR
|
||
|
|
b10GbaseW(37), -- 10GBASE-W
|
||
|
|
b10GbaseEW(38), -- 10GBASE-EW
|
||
|
|
b10GbaseLW(39), -- 10GBASE-LW
|
||
|
|
b10GbaseSW(40), -- 10GBASE-SW
|
||
|
|
-- new since RFC 3636
|
||
|
|
b10GbaseCX4(41), -- 10GBASE-CX4
|
||
|
|
b2BaseTL(42), -- 2BASE-TL
|
||
|
|
b10PassTS(43), -- 10PASS-TS
|
||
|
|
b100BaseBX10D(44), -- 100BASE-BX10D
|
||
|
|
b100BaseBX10U(45), -- 100BASE-BX10U
|
||
|
|
b100BaseLX10(46), -- 100BASE-LX10
|
||
|
|
b1000BaseBX10D(47), -- 1000BASE-BX10D
|
||
|
|
b1000BaseBX10U(48), -- 1000BASE-BX10U
|
||
|
|
b1000BaseLX10(49), -- 1000BASE-LX10
|
||
|
|
b1000BasePX10D(50), -- 1000BASE-PX10D
|
||
|
|
b1000BasePX10U(51), -- 1000BASE-PX10U
|
||
|
|
b1000BasePX20D(52), -- 1000BASE-PX20D
|
||
|
|
b1000BasePX20U(53), -- 1000BASE-PX20U
|
||
|
|
b10GbaseT(54), -- 10GBASE-T
|
||
|
|
b10GbaseLRM(55), -- 10GBASE-LRM
|
||
|
|
b1000baseKX(56), -- 1000BASE-KX
|
||
|
|
b10GbaseKX4(57), -- 10GBASE-KX4
|
||
|
|
b10GbaseKR(58), -- 10GBASE-KR
|
||
|
|
b10G1GbasePRXD1(59),-- 10/1GBASE-PRX-D1
|
||
|
|
b10G1GbasePRXD2(60),-- 10/1GBASE-PRX-D2
|
||
|
|
b10G1GbasePRXD3(61),-- 10/1GBASE-PRX-D3
|
||
|
|
b10G1GbasePRXU1(62),-- 10/1GBASE-PRX-U1
|
||
|
|
b10G1GbasePRXU2(63),-- 10/1GBASE-PRX-U2
|
||
|
|
b10G1GbasePRXU3(64),-- 10/1GBASE-PRX-U3
|
||
|
|
b10GbasePRD1(65), -- 10GBASE-PR-D1
|
||
|
|
b10GbasePRD2(66), -- 10GBASE-PR-D2
|
||
|
|
b10GbasePRD3(67), -- 10GBASE-PR-D3
|
||
|
|
b10GbasePRU1(68), -- 10GBASE-PR-U1
|
||
|
|
b10GbasePRU3(69) -- 10GBASE-PR-U3
|
||
|
|
}
|
||
|
|
|
||
|
|
IANAifMauMediaAvailable ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This data type is used as the syntax of the
|
||
|
|
ifMauMediaAvailable and rpMauMediaAvailable objects in the
|
||
|
|
(updated) definition of MAU-MIB's ifMauTable and rpMauTable
|
||
|
|
respectively.
|
||
|
|
|
||
|
|
Possible values are:
|
||
|
|
other(1) - undefined (not listed below)
|
||
|
|
unknown(2) - MAU's true state is unknown; e.g.,
|
||
|
|
during initialization
|
||
|
|
available(3) - link, light, or loopback is normal
|
||
|
|
notAvailable(4) - link loss, low light, or no loopback
|
||
|
|
remoteFault(5) - a fault has been detected at the
|
||
|
|
remote end of the link. This value
|
||
|
|
applies to 10BASE-FB, 100BASE-T4 Far
|
||
|
|
End Fault Indication and non-specified
|
||
|
|
remote faults from a system running
|
||
|
|
auto-negotiation
|
||
|
|
invalidSignal(6) - invalid signal has been received from
|
||
|
|
the other end of the link, 10BASE-FB
|
||
|
|
only
|
||
|
|
remoteJabber(7) - remote fault, due to jabber
|
||
|
|
|
||
|
|
remoteLinkLoss(8) - remote fault, due to link loss
|
||
|
|
remoteTest(9) - remote fault, due to test
|
||
|
|
offline(10) - offline, Clause 37 Auto-Negotiation
|
||
|
|
only
|
||
|
|
autoNegError(11) - Auto-Negotiation Error, Clause 37
|
||
|
|
Auto-Negotiation only
|
||
|
|
pmdLinkFault(12) - PMA/PMD receive link fault. In case
|
||
|
|
of PAF (2BASE-TL / 10PASS-TS PHYs),
|
||
|
|
all PMEs in the aggregation group have
|
||
|
|
detected a link fault
|
||
|
|
wisFrameLoss(13) - WIS loss of frame, 10GBASE-W only
|
||
|
|
wisSignalLoss(14) - WIS loss of signal, 10GBASE-W only
|
||
|
|
pcsLinkFault(15) - PCS receive link fault
|
||
|
|
excessiveBER(16) - PCS Bit Error Ratio monitor
|
||
|
|
reporting excessive error ratio
|
||
|
|
dxsLinkFault(17) - DTE XGXS receive link fault, XAUI only
|
||
|
|
pxsLinkFault(18) - PHY XGXS receive link fault, XAUI only
|
||
|
|
availableReduced(19) - link normal, reduced bandwidth,
|
||
|
|
2BASE-TL / 10PASS-TS only
|
||
|
|
ready(20) - at least one PME in the aggregation
|
||
|
|
group is detecting handshake tones,
|
||
|
|
2BASE-TL / 10PASS-TS only
|
||
|
|
|
||
|
|
If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T,
|
||
|
|
10BASE-F), then this is equivalent to the link test fail
|
||
|
|
state/low light function. For an AUI, 10BASE2, 10BASE5, or
|
||
|
|
10BROAD36 MAU, this indicates whether loopback is detected on
|
||
|
|
the DI circuit. The value of this attribute persists between
|
||
|
|
packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and
|
||
|
|
10BASEFP.
|
||
|
|
|
||
|
|
At power-up or following a reset, the Media Available state
|
||
|
|
will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and
|
||
|
|
10BASE-FP MAUs. For these MAUs loopback will be tested on each
|
||
|
|
transmission during which no collision is detected.
|
||
|
|
If DI is receiving input when DO returns to IDL after a
|
||
|
|
transmission and there has been no collision during the
|
||
|
|
transmission, then loopback will be detected. The Media
|
||
|
|
Available state will only change during noncollided
|
||
|
|
transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and
|
||
|
|
10BASE-FP MAUs.
|
||
|
|
|
||
|
|
For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX,
|
||
|
|
100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the
|
||
|
|
states within the link integrity state diagram.
|
||
|
|
Any MAU that implements management of [IEEE802.3] Clause
|
||
|
|
28 Auto-Negotiation, will map remote fault indication to
|
||
|
|
remoteFault(5).
|
||
|
|
|
||
|
|
Any MAU that implements management of Clause 37
|
||
|
|
Auto-Negotiation, will map the received RF1 and RF2 bits as
|
||
|
|
follows: Offline maps to offline(10), Link_Failure maps to
|
||
|
|
remoteFault(5), and Auto-Negotiation Error maps to
|
||
|
|
autoNegError(11).
|
||
|
|
|
||
|
|
The value remoteFault(5) applies to 10BASE-FB remote
|
||
|
|
fault indication, the 100BASE-X far-end fault indication, and
|
||
|
|
nonspecified remote faults from a system running Clause 28
|
||
|
|
Auto-Negotiation.
|
||
|
|
|
||
|
|
The value remoteJabber(7), remoteLink loss(8), or remoteTest(9)
|
||
|
|
SHOULD be used instead of remoteFault(5) where the reason for
|
||
|
|
remote fault is identified in the remote signaling protocol.
|
||
|
|
Where a Clause 22 MII or Clause 35 GMII is present, a logic
|
||
|
|
one in the remote fault bit maps to the value remoteFault(5),
|
||
|
|
a logic zero in the link status bit maps to the enumeration
|
||
|
|
notAvailable(4). The value notAvailable(4) takes precedence
|
||
|
|
over remoteFault(5).
|
||
|
|
|
||
|
|
For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to
|
||
|
|
the condition where the PHY (PCS with connected PMEs) is
|
||
|
|
initializing, the value ready(20) maps to the condition where
|
||
|
|
the interface is down and at least one PME in the aggregation
|
||
|
|
group is ready for handshake, the value available(3) maps to
|
||
|
|
the condition where all the PMEs in the aggregation group are
|
||
|
|
up, the value notAvailable(4) maps to the condition where all
|
||
|
|
the PMEs in the aggregation group are down and no handshake
|
||
|
|
tones are detected, the value availableReduced(19) maps to the
|
||
|
|
condition where the interface is up, a link fault is detected
|
||
|
|
at the receive direction by one or more PMEs in the
|
||
|
|
aggregation group, but at least one PME is up and the
|
||
|
|
enumeration pmdLinkFault(12) maps to the condition where a link
|
||
|
|
fault is detected at the receive direction by all of the PMEs
|
||
|
|
in the aggregation group.
|
||
|
|
|
||
|
|
For 10 Gb/s the enumerations map to value of the link_fault
|
||
|
|
variable within the Link Fault Signaling state diagram
|
||
|
|
as follows: the value OK maps to the value available(3),
|
||
|
|
the value Local Fault maps to the value notAvailable(4),
|
||
|
|
and the value Remote Fault maps to the value remoteFault(5).
|
||
|
|
The value pmdLinkFault(12), wisFrameLoss(13),
|
||
|
|
wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or
|
||
|
|
dxsLinkFault(17) SHOULD be used instead of the value
|
||
|
|
notAvailable(4), where the reason for the Local Fault state can
|
||
|
|
be identified through the use of the Clause 45 MDIO Interface.
|
||
|
|
Where multiple reasons for the Local Fault state can be
|
||
|
|
identified, only the highest precedence error SHOULD be
|
||
|
|
|
||
|
|
reported. This precedence in descending order is as follows:
|
||
|
|
|
||
|
|
pxsLinkFault
|
||
|
|
pmdLinkFault
|
||
|
|
wisFrameLoss
|
||
|
|
wisSignalLoss
|
||
|
|
pcsLinkFault
|
||
|
|
excessiveBER
|
||
|
|
dxsLinkFault.
|
||
|
|
|
||
|
|
Where a Clause 45 MDIO interface is present a logic zero in
|
||
|
|
the PMA/PMD Receive link status bit ([IEEE802.3]
|
||
|
|
Section 45.2.1.2.2) maps to the value pmdLinkFault(12),
|
||
|
|
logic one in the LOF status bit (Section 45.2.2.10.4) maps
|
||
|
|
to the value wisFrameLoss(13), a logic one in the LOS
|
||
|
|
status bit (Section 45.2.2.10.5) maps to the value
|
||
|
|
wisSignalLoss, a logic zero in the PCS Receive
|
||
|
|
link status bit (Section 45.2.3.2.2) maps to the value
|
||
|
|
pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched
|
||
|
|
high BER status bit (Section 45.2.3.12.2) maps to the value
|
||
|
|
excessiveBER, a logic zero in the DTE XS receive link status
|
||
|
|
bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17)
|
||
|
|
and a logic zero in the PHY XS transmit link status bit
|
||
|
|
(Section 45.2.4.2.2) maps to the value pxsLinkFault(18).
|
||
|
|
|
||
|
|
The most recent version of this textual convention is available
|
||
|
|
in the online version of this MIB module on the IANA web site.
|
||
|
|
|
||
|
|
Requests for new values should be made to IANA via email
|
||
|
|
(iana&iana.org)."
|
||
|
|
REFERENCE
|
||
|
|
"[IEEE802.3], Section 30.5.1.1.4"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
unknown(2),
|
||
|
|
available(3),
|
||
|
|
notAvailable(4),
|
||
|
|
remoteFault(5),
|
||
|
|
invalidSignal(6),
|
||
|
|
remoteJabber(7),
|
||
|
|
remoteLinkLoss(8),
|
||
|
|
remoteTest(9),
|
||
|
|
offline(10),
|
||
|
|
autoNegError(11),
|
||
|
|
pmdLinkFault(12),
|
||
|
|
wisFrameLoss(13),
|
||
|
|
wisSignalLoss(14),
|
||
|
|
pcsLinkFault(15),
|
||
|
|
|
||
|
|
excessiveBER(16),
|
||
|
|
dxsLinkFault(17),
|
||
|
|
pxsLinkFault(18),
|
||
|
|
availableReduced(19),
|
||
|
|
ready(20)
|
||
|
|
}
|
||
|
|
|
||
|
|
IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This data type is used as the syntax of the
|
||
|
|
ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and
|
||
|
|
ifMauAutoNegCapReceivedBits objects in the (updated) definition
|
||
|
|
of MAU-MIB's ifMauAutoNegTable.
|
||
|
|
|
||
|
|
The most recent version of this textual convention is available
|
||
|
|
in the online version of this MIB module on the IANA web site.
|
||
|
|
|
||
|
|
Requests for new values should be made to IANA via email
|
||
|
|
(iana&iana.org)."
|
||
|
|
REFERENCE
|
||
|
|
"[IEEE802.3], Section 30.6.1.1.5"
|
||
|
|
SYNTAX BITS {
|
||
|
|
bOther(0), -- other or unknown
|
||
|
|
b10baseT(1), -- 10BASE-T half duplex mode
|
||
|
|
b10baseTFD(2), -- 10BASE-T full duplex mode
|
||
|
|
b100baseT4(3), -- 100BASE-T4
|
||
|
|
b100baseTX(4), -- 100BASE-TX half duplex mode
|
||
|
|
b100baseTXFD(5), -- 100BASE-TX full duplex mode
|
||
|
|
b100baseT2(6), -- 100BASE-T2 half duplex mode
|
||
|
|
b100baseT2FD(7), -- 100BASE-T2 full duplex mode
|
||
|
|
bFdxPause(8), -- PAUSE for full-duplex links
|
||
|
|
bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
|
||
|
|
-- links
|
||
|
|
bFdxSPause(10), -- Symmetric PAUSE for full-duplex
|
||
|
|
-- links
|
||
|
|
bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
|
||
|
|
-- full-duplex links
|
||
|
|
b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
|
||
|
|
-- duplex mode
|
||
|
|
b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
|
||
|
|
-- duplex mode
|
||
|
|
b1000baseT(14), -- 1000BASE-T half duplex mode
|
||
|
|
b1000baseTFD(15), -- 1000BASE-T full duplex mode
|
||
|
|
b10GbaseT(16), -- 10GBASE-T
|
||
|
|
b1000baseKX(17), -- 1000BASE-KX
|
||
|
|
b10GbaseKX4(18), -- 10GBASE-KX4
|
||
|
|
b10GbaseKR(19) -- 10GBASE-KR
|
||
|
|
}
|
||
|
|
|
||
|
|
IANAifJackType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION
|
||
|
|
"Common enumeration values for repeater and interface MAU
|
||
|
|
jack types. This data type is used as the syntax of the
|
||
|
|
ifJackType and rpJackType objects in the (updated) definition
|
||
|
|
of MAU-MIB's ifJackTable and rpJackTable respectively.
|
||
|
|
|
||
|
|
Possible values are:
|
||
|
|
other(1) - undefined or unknown
|
||
|
|
rj45(2) - RJ45
|
||
|
|
rj45S(3) - RJ45 shielded
|
||
|
|
db9(4) - DB9
|
||
|
|
bnc(5) - BNC
|
||
|
|
fAUI(6) - AUI female
|
||
|
|
mAUI(7) - AUI male
|
||
|
|
fiberSC(8) - SC fiber
|
||
|
|
fiberMIC(9) - MIC fiber
|
||
|
|
fiberST(10) - ST fiber
|
||
|
|
telco(11) - Telco
|
||
|
|
mtrj(12) - MT-RJ fiber
|
||
|
|
hssdc(13) - fiber channel style-2
|
||
|
|
fiberLC(14) - LC fiber
|
||
|
|
cx4(15) - IB4X for 10GBASE-CX4
|
||
|
|
|
||
|
|
The most recent version of this textual convention is available
|
||
|
|
in the online version of this MIB module on the IANA web site.
|
||
|
|
|
||
|
|
Requests for new values should be made to IANA via email
|
||
|
|
(iana&iana.org)."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
rj45(2),
|
||
|
|
rj45S(3),
|
||
|
|
db9(4),
|
||
|
|
bnc(5),
|
||
|
|
fAUI(6),
|
||
|
|
mAUI(7),
|
||
|
|
fiberSC(8),
|
||
|
|
fiberMIC(9),
|
||
|
|
fiberST(10),
|
||
|
|
telco(11),
|
||
|
|
mtrj(12),
|
||
|
|
hssdc(13),
|
||
|
|
fiberLC(14),
|
||
|
|
-- new since RFC 3636
|
||
|
|
cx4(15)
|
||
|
|
}
|
||
|
|
|
||
|
|
-- OBJECT IDENTITIES for MAU types
|
||
|
|
|
||
|
|
-- (see rpMauType and ifMauType of MAU-MIB for usage)
|
||
|
|
-- The following definitions has been moved from RFC 3636 and
|
||
|
|
-- no longer appear in its revision.
|
||
|
|
|
||
|
|
dot3MauType OBJECT IDENTIFIER ::= { mib-2 snmpDot3MauMgt(26) 4 }
|
||
|
|
|
||
|
|
dot3MauTypeAUI OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "no internal MAU, view from AUI"
|
||
|
|
REFERENCE "[IEEE802.3], Section 7"
|
||
|
|
::= { dot3MauType 1 }
|
||
|
|
|
||
|
|
dot3MauType10Base5 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "thick coax MAU"
|
||
|
|
REFERENCE "[IEEE802.3], Section 7"
|
||
|
|
::= { dot3MauType 2 }
|
||
|
|
|
||
|
|
dot3MauTypeFoirl OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "FOIRL MAU"
|
||
|
|
REFERENCE "[IEEE802.3], Section 9.9"
|
||
|
|
::= { dot3MauType 3 }
|
||
|
|
|
||
|
|
dot3MauType10Base2 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "thin coax MAU"
|
||
|
|
REFERENCE "[IEEE802.3], Section 10"
|
||
|
|
::= { dot3MauType 4 }
|
||
|
|
|
||
|
|
dot3MauType10BaseT OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "UTP MAU.
|
||
|
|
Note that it is strongly recommended that
|
||
|
|
agents return either dot3MauType10BaseTHD or
|
||
|
|
dot3MauType10BaseTFD if the duplex mode is
|
||
|
|
known. However, management applications should
|
||
|
|
be prepared to receive this MAU type value from
|
||
|
|
older agent implementations."
|
||
|
|
REFERENCE "[IEEE802.3], Section 14"
|
||
|
|
::= { dot3MauType 5 }
|
||
|
|
|
||
|
|
dot3MauType10BaseFP OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "passive fiber MAU"
|
||
|
|
REFERENCE "[IEEE802.3], Section 16"
|
||
|
|
::= { dot3MauType 6 }
|
||
|
|
|
||
|
|
dot3MauType10BaseFB OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "sync fiber MAU"
|
||
|
|
REFERENCE "[IEEE802.3], Section 17"
|
||
|
|
::= { dot3MauType 7 }
|
||
|
|
|
||
|
|
dot3MauType10BaseFL OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "async fiber MAU.
|
||
|
|
Note that it is strongly recommended that
|
||
|
|
agents return either dot3MauType10BaseFLHD or
|
||
|
|
dot3MauType10BaseFLFD if the duplex mode is
|
||
|
|
known. However, management applications should
|
||
|
|
be prepared to receive this MAU type value from
|
||
|
|
older agent implementations."
|
||
|
|
REFERENCE "[IEEE802.3], Section 18"
|
||
|
|
::= { dot3MauType 8 }
|
||
|
|
|
||
|
|
dot3MauType10Broad36 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "broadband DTE MAU.
|
||
|
|
Note that 10BROAD36 MAUs can be attached to
|
||
|
|
interfaces but not to repeaters."
|
||
|
|
REFERENCE "[IEEE802.3], Section 11"
|
||
|
|
::= { dot3MauType 9 }
|
||
|
|
|
||
|
|
------ new since RFC 1515:
|
||
|
|
dot3MauType10BaseTHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "UTP MAU, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 14"
|
||
|
|
::= { dot3MauType 10 }
|
||
|
|
|
||
|
|
dot3MauType10BaseTFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "UTP MAU, full duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 14"
|
||
|
|
::= { dot3MauType 11 }
|
||
|
|
|
||
|
|
dot3MauType10BaseFLHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "async fiber MAU, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 18"
|
||
|
|
::= { dot3MauType 12 }
|
||
|
|
|
||
|
|
dot3MauType10BaseFLFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "async fiber MAU, full duplex mode"
|
||
|
|
|
||
|
|
REFERENCE "[IEEE802.3], Section 18"
|
||
|
|
::= { dot3MauType 13 }
|
||
|
|
|
||
|
|
dot3MauType100BaseT4 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "4 pair category 3 UTP"
|
||
|
|
REFERENCE "[IEEE802.3], Section 23"
|
||
|
|
::= { dot3MauType 14 }
|
||
|
|
|
||
|
|
dot3MauType100BaseTXHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "2 pair category 5 UTP, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 25"
|
||
|
|
::= { dot3MauType 15 }
|
||
|
|
|
||
|
|
dot3MauType100BaseTXFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "2 pair category 5 UTP, full duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 25"
|
||
|
|
::= { dot3MauType 16 }
|
||
|
|
|
||
|
|
dot3MauType100BaseFXHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "X fiber over PMT, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 26"
|
||
|
|
::= { dot3MauType 17 }
|
||
|
|
|
||
|
|
dot3MauType100BaseFXFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "X fiber over PMT, full duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 26"
|
||
|
|
::= { dot3MauType 18 }
|
||
|
|
|
||
|
|
dot3MauType100BaseT2HD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "2 pair category 3 UTP, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 32"
|
||
|
|
::= { dot3MauType 19 }
|
||
|
|
|
||
|
|
dot3MauType100BaseT2FD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "2 pair category 3 UTP, full duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 32"
|
||
|
|
::= { dot3MauType 20 }
|
||
|
|
|
||
|
|
------ new since RFC 2239:
|
||
|
|
dot3MauType1000BaseXHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
|
||
|
|
DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 36"
|
||
|
|
::= { dot3MauType 21 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseXFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 36"
|
||
|
|
::= { dot3MauType 22 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseLXHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Fiber over long-wavelength laser, half duplex
|
||
|
|
mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 38"
|
||
|
|
::= { dot3MauType 23 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseLXFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Fiber over long-wavelength laser, full duplex
|
||
|
|
mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 38"
|
||
|
|
::= { dot3MauType 24 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseSXHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Fiber over short-wavelength laser, half
|
||
|
|
duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 38"
|
||
|
|
::= { dot3MauType 25 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseSXFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Fiber over short-wavelength laser, full
|
||
|
|
duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 38"
|
||
|
|
::= { dot3MauType 26 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseCXHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Copper over 150-Ohm balanced cable, half
|
||
|
|
duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 39"
|
||
|
|
::= { dot3MauType 27 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseCXFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Copper over 150-Ohm balanced cable, full
|
||
|
|
|
||
|
|
duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 39"
|
||
|
|
::= { dot3MauType 28 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseTHD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Four-pair Category 5 UTP, half duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 40"
|
||
|
|
::= { dot3MauType 29 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseTFD OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Four-pair Category 5 UTP, full duplex mode"
|
||
|
|
REFERENCE "[IEEE802.3], Section 40"
|
||
|
|
::= { dot3MauType 30 }
|
||
|
|
|
||
|
|
------ new since RFC 2668:
|
||
|
|
dot3MauType10GigBaseX OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "X PCS/PMA, unknown PMD."
|
||
|
|
REFERENCE "[IEEE802.3], Section 48"
|
||
|
|
::= { dot3MauType 31 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseLX4 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "X fiber over WWDM optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 53"
|
||
|
|
::= { dot3MauType 32 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseR OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "R PCS/PMA, unknown PMD."
|
||
|
|
REFERENCE "[IEEE802.3], Section 49"
|
||
|
|
::= { dot3MauType 33 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseER OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "R fiber over 1550 nm optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 52"
|
||
|
|
::= { dot3MauType 34 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseLR OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "R fiber over 1310 nm optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 52"
|
||
|
|
::= { dot3MauType 35 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseSR OBJECT-IDENTITY
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "R fiber over 850 nm optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 52"
|
||
|
|
::= { dot3MauType 36 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseW OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "W PCS/PMA, unknown PMD."
|
||
|
|
REFERENCE "[IEEE802.3], Section 49 and 50"
|
||
|
|
::= { dot3MauType 37 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseEW OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "W fiber over 1550 nm optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 52"
|
||
|
|
::= { dot3MauType 38 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseLW OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "W fiber over 1310 nm optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 52"
|
||
|
|
::= { dot3MauType 39 }
|
||
|
|
|
||
|
|
dot3MauType10GigBaseSW OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "W fiber over 850 nm optics"
|
||
|
|
REFERENCE "[IEEE802.3], Section 52"
|
||
|
|
::= { dot3MauType 40 }
|
||
|
|
|
||
|
|
------ new since RFC 3636:
|
||
|
|
dot3MauType10GigBaseCX4 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "X copper over 8 pair 100-Ohm balanced cable"
|
||
|
|
REFERENCE "[IEEE802.3], Section 54"
|
||
|
|
::= { dot3MauType 41 }
|
||
|
|
|
||
|
|
dot3MauType2BaseTL OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Voice grade UTP copper, up to 2700m, optional PAF"
|
||
|
|
REFERENCE "[IEEE802.3], Sections 61 and 63"
|
||
|
|
::= { dot3MauType 42 }
|
||
|
|
|
||
|
|
dot3MauType10PassTS OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Voice grade UTP copper, up to 750m, optional PAF"
|
||
|
|
REFERENCE "[IEEE802.3], Sections 61 and 62"
|
||
|
|
::= { dot3MauType 43 }
|
||
|
|
|
||
|
|
dot3MauType100BaseBX10D OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 58"
|
||
|
|
::= { dot3MauType 44 }
|
||
|
|
|
||
|
|
dot3MauType100BaseBX10U OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 58"
|
||
|
|
::= { dot3MauType 45 }
|
||
|
|
|
||
|
|
dot3MauType100BaseLX10 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Two single-mode fibers, long wavelength, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 58"
|
||
|
|
::= { dot3MauType 46 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseBX10D OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 59"
|
||
|
|
::= { dot3MauType 47 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseBX10U OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 59"
|
||
|
|
::= { dot3MauType 48 }
|
||
|
|
|
||
|
|
dot3MauType1000BaseLX10 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Two sigle-mode fiber, long wavelength, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 59"
|
||
|
|
::= { dot3MauType 49 }
|
||
|
|
|
||
|
|
dot3MauType1000BasePX10D OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber EPON OLT, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 60"
|
||
|
|
::= { dot3MauType 50 }
|
||
|
|
|
||
|
|
dot3MauType1000BasePX10U OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber EPON ONU, 10km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 60"
|
||
|
|
::= { dot3MauType 51 }
|
||
|
|
|
||
|
|
dot3MauType1000BasePX20D OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber EPON OLT, 20km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 60"
|
||
|
|
::= { dot3MauType 52 }
|
||
|
|
|
||
|
|
dot3MauType1000BasePX20U OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber EPON ONU, 20km"
|
||
|
|
REFERENCE "[IEEE802.3], Section 60"
|
||
|
|
::= { dot3MauType 53 }
|
||
|
|
|
||
|
|
dot3MauType10GbaseT OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Four-pair Category 6A or better, full duplex mode only"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 55"
|
||
|
|
::= { dot3MauType 54 }
|
||
|
|
|
||
|
|
dot3MauType10GbaseLRM OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "R multimode fiber over 1310 nm optics"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 68"
|
||
|
|
::= { dot3MauType 55 }
|
||
|
|
|
||
|
|
dot3MauType1000baseKX OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "X backplane, full duplex mode only"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 70"
|
||
|
|
::= { dot3MauType 56 }
|
||
|
|
|
||
|
|
dot3MauType10GbaseKX4 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "4 lane X backplane, full duplex mode only"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 71"
|
||
|
|
::= { dot3MauType 57 }
|
||
|
|
|
||
|
|
dot3MauType10GbaseKR OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "R backplane, full duplex mode only"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 72"
|
||
|
|
::= { dot3MauType 58 }
|
||
|
|
|
||
|
|
dot3MauType10G1GbasePRXD1 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber asymmetric-rate EPON OLT, supporting low
|
||
|
|
power budget (PRX10)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 59 }
|
||
|
|
|
||
|
|
dot3MauType10G1GbasePRXD2 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber asymmetric-rate EPON OLT, supporting
|
||
|
|
medium power budget (PRX20)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 60 }
|
||
|
|
|
||
|
|
dot3MauType10G1GbasePRXD3 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber asymmetric-rate EPON OLT, supporting high
|
||
|
|
power budget (PRX30)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 61 }
|
||
|
|
|
||
|
|
dot3MauType10G1GbasePRXU1 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber asymmetric-rate EPON ONU, supporting low
|
||
|
|
power budget (PRX10)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 62 }
|
||
|
|
|
||
|
|
dot3MauType10G1GbasePRXU2 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber asymmetric-rate EPON ONU, supporting
|
||
|
|
medium power budget (PRX20)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 63 }
|
||
|
|
|
||
|
|
dot3MauType10G1GbasePRXU3 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber asymmetric-rate EPON ONU, supporting high
|
||
|
|
power budget (PRX30)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 64 }
|
||
|
|
|
||
|
|
dot3MauType10GbasePRD1 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber symmetric-rate EPON OLT, supporting low
|
||
|
|
power budget (PR10)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 65 }
|
||
|
|
|
||
|
|
dot3MauType10GbasePRD2 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber symmetric-rate EPON OLT, supporting
|
||
|
|
medium power budget (PR20)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 66 }
|
||
|
|
|
||
|
|
dot3MauType10GbasePRD3 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber symmetric-rate EPON OLT, supporting high
|
||
|
|
power budget (PR30)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 67 }
|
||
|
|
|
||
|
|
dot3MauType10GbasePRU1 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber symmetric-rate EPON ONU, supporting
|
||
|
|
low and medium power budget (PR10 and PR20)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 68 }
|
||
|
|
|
||
|
|
dot3MauType10GbasePRU3 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "One single-mode fiber symmetric-rate EPON ONU, supporting high
|
||
|
|
power budget (PR30)"
|
||
|
|
REFERENCE "IEEE Std 802.3, Clause 75"
|
||
|
|
::= { dot3MauType 69 }
|
||
|
|
|
||
|
|
|
||
|
|
END
|