mibs/MIBS/IEEE-802DOT17-RPR-MIB

-- *****************************************************************
-- IEEE-802DOT17-RPR-MIB.my :  IEEE 802.17 MIB file
--
-- June 2004
--
-- Copyright (c) 2004 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
-- This mib was extracted from IEEE 802.17 standard

IEEE-802DOT17-RPR-MIB DEFINITIONS ::= BEGIN


IMPORTS

   MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
   Counter64, Unsigned32
       FROM SNMPv2-SMI
   MODULE-COMPLIANCE, OBJECT-GROUP 
       FROM SNMPv2-CONF
   MacAddress, TimeStamp,TEXTUAL-CONVENTION, TruthValue, DateAndTime
       FROM SNMPv2-TC
   InterfaceIndex, InterfaceIndexOrZero
       FROM IF-MIB
   SnmpAdminString
       FROM SNMP-FRAMEWORK-MIB
   InetAddressType, InetAddress
       FROM INET-ADDRESS-MIB
   HCPerfTotalCount, HCPerfIntervalCount, HCPerfCurrentCount
       FROM HC-PerfHist-TC-MIB
   ;


    ieee802dot17rprMIB MODULE-IDENTITY
    LAST-UPDATED "200404211200Z"  -- 21 Apr 2004 12:00:00 UTC
    ORGANIZATION "IEEE 802.17 Working Group"
    CONTACT-INFO "stds-802-17@ieee.org"
    DESCRIPTION
        "The resilient packet ring MIB for IEEE 802.17.

         Copyright (C) IEEE802.17.
         This version of this MIB module is part of IEEE802.17;
         see the draft itself for full legal notices."

    -- Revision history
    REVISION
        "200404211200Z"  -- 21 Apr 2004 12:00:00 UTC
    DESCRIPTION
        "First published version."

    ::= {iso std(0) iso8802(8802) ieee802dot17(17) ieee802dot17mibs(1) 1}

--
--   Textual Conventions used in this MIB
--

RprSpan ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
       "Indicates the span interface of the RPR MAC. Each RPR
        span is connected to both ringlet0 and ringlet1.
        The east span receives from ringlet1 and transmits through
        ringlet0.
        The west span receives from ringlet0 and transmits through
        ringlet1."
    SYNTAX INTEGER {
        east    (1),
        west    (2)
        }

RprProtectionStatus ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Indicates the current protection status of the RPR MAC
         span.
         The status values are (arranged in ascending priority 
         order) :
    
         noRequest
         No protection request on the span, the protection
         status is idle.

         waitToRestore
         The condition for an automatic protection was cleared and 
         the span is engaged in a wait to restore period.

         manualSwitch
         A user initiated manual switch (via the 
         rprSpanProtectionCommand) on the span.

         signalDegraded
         An automatically-detected status which causes protection on
         a span when a media signal degrade is detected due to 
         excessive BER.

         signalFailed
         An automatically-detected status which causes protection on
         a span when a media signal failure is detected.

         forcedSwitch
         A user initiated forced switch (via the 
         rprSpanProtectionCommand) on the span."
    SYNTAX BITS {
        noRequest       (0),
        waitToRestore   (1),
        manualSwitch    (2),
        signalDegraded  (3),
        signalFailed    (4),
        forcedSwitch    (5)
        }

RprOamRinglet ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
       "Indicates the ringlet on which the OAM action 
        request/response is sent/replied.
        The valid values for this object are:
        (1) Default (2) ringlet0 (3) ringlet1 (4) Reverse ringlet.

        The value (4) is applicable only for OAM response action."
    SYNTAX INTEGER {
        default        (1),
        ringlet0       (2),
        ringlet1       (3),
        reverseRinglet (4)
        }

--
-- Object groups
--

rprObjects            OBJECT IDENTIFIER ::= { ieee802dot17rprMIB 1 }
   
rprGeneral            OBJECT IDENTIFIER ::= { rprObjects 1 }
rprProtocols          OBJECT IDENTIFIER ::= { rprObjects 2 }
rprSpanCounters       OBJECT IDENTIFIER ::= { rprObjects 3 }
rprClientCounters     OBJECT IDENTIFIER ::= { rprObjects 4 }
rprSpanErrorCounters  OBJECT IDENTIFIER ::= { rprObjects 5 }


--
-- Conformance 
--

rprConformance        OBJECT IDENTIFIER ::= { ieee802dot17rprMIB 2 } 


--
-- RPR interface table
--

rprIfTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprIfEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR interface table, extension to the ifTable.
        
         All read-write attributes in this table are non-volatile,
         i.e. will be retained across system reset."
    ::= { rprGeneral 1 }

rprIfEntry OBJECT-TYPE
    SYNTAX        RprIfEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "One such entry for every interface in the ifTable which 
         has an ifType of RPR interface."
    INDEX { rprIfIndex }
    ::= { rprIfTable 1 }

RprIfEntry ::= SEQUENCE {
    rprIfIndex                  InterfaceIndex,
    rprIfStationsOnRing         Unsigned32,
    rprIfReversionMode          TruthValue,
    rprIfProtectionWTR          Unsigned32,
    rprIfProtectionFastTimer    Unsigned32,
    rprIfProtectionSlowTimer    Unsigned32,
    rprIfAtdTimer               Unsigned32,
    rprIfKeepaliveTimeout       Unsigned32,
    rprIfFairnessAggressive     TruthValue,
    rprIfPtqSize                Unsigned32,
    rprIfStqSize                Unsigned32,
    rprIfSTQFullThreshold       Unsigned32,
    rprIfIdleThreshold          Unsigned32,
    rprIfSesThreshold           Unsigned32,
    rprIfWrapConfig             TruthValue,
    rprIfJumboFramePreferred    TruthValue,
    rprIfMacOperModes           BITS,
    rprIfRingOperModes          BITS,
    rprIfCurrentStatus          BITS,
    rprIfLastChange             TimeStamp,
    rprIfChanges                Counter32
    }

rprIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprIfEntry 1 }

rprIfStationsOnRing OBJECT-TYPE
    SYNTAX        Unsigned32 (1..255)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of stations on the RPR ring.
         When the operStatus of the interface is down the value is 1."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.4, numStations"
    ::= { rprIfEntry 2 }

rprIfReversionMode OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The reversion mode of the MAC,
         False for non-revertive
         True for revertive.

         Revertive station will return to idle state after 
         WTR interval expires.

         Default value for reversion mode is true."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, revertive"
    DEFVAL { true }
    ::= { rprIfEntry 3 }

rprIfProtectionWTR OBJECT-TYPE
    SYNTAX        Unsigned32 (0..1440)
    UNITS         "Seconds" 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the length of time in seconds, to remain in the
         protection state, after the cause of an automatic
         protection is removed. This mechanism prevents protection
         switch oscillations.

         Default value for WTR is 10 seconds."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, wtr"
    DEFVAL { 10 }
    ::= { rprIfEntry 4 }

rprIfProtectionFastTimer OBJECT-TYPE
    SYNTAX        Unsigned32 (1..20)
    UNITS         "milliseconds" 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the protection messages fast timer value in 1 ms units.
         The fast timer is used for protection protocols.

         Default value for fast timer protection messages is 10 ms."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, txFastTimeout"
    DEFVAL { 10 }
    ::= { rprIfEntry 5 }

rprIfProtectionSlowTimer OBJECT-TYPE
    SYNTAX        Unsigned32 (1..200)
    UNITS         "50 milliseconds" 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the protection slow timer value in 50 ms units.
         The slow timer is used for topology and protection protocols.

         Default value for slow timer protection and topology messages
         is 20 units of 50 ms, i.e. 1sec."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, txSlowTimeout"
    DEFVAL { 20 }
    ::= { rprIfEntry 6 }

rprIfAtdTimer OBJECT-TYPE
    SYNTAX        Unsigned32 (1..200)
    UNITS         "50 milliseconds" 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the timer period for ATD message transmissions.

         Default value is 20 units of 50 ms, i.e. 1sec."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, atdTimerTimeout"
    DEFVAL { 20 }
    ::= { rprIfEntry 7 }

rprIfKeepaliveTimeout OBJECT-TYPE
    SYNTAX        Unsigned32 (2..50)
    UNITS         "milliseconds"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the timer to declare keepalive timeout, multiples
         of 1 millisecond.

         Default value for keepalive timeout is 3 ms."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, keepaliveTime"
    DEFVAL { 3 }
    ::= { rprIfEntry 8 }

rprIfFairnessAggressive OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates whether the selected RPR fairness algorithm is 
         aggressive or conservative.

         If true, the selected fairness mode is aggressive.
         If false, the selected fairness mode is conservative.

         The default value for fairness aggressive is true."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.5, conservativeMode"
    DEFVAL { true }
    ::= { rprIfEntry 9 }

rprIfPtqSize OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Bytes" 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The size in bytes of the Primary Transit Queue per ringlet
        supported by this RPR MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, sizePtq"
    ::= { rprIfEntry 10 }

rprIfStqSize OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Bytes" 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The size in bytes of the Secondary Transit Queue per ringlet
        supported by this RPR MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, size Stq"
    ::= { rprIfEntry 11 }

rprIfSTQFullThreshold OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "MTUs"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A level of STQ occupancy at or above which the STQ 
         is almost full.

         This attribute specifies the full threshold location
         in MTU units below the STQ size.
         The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
         The default value for stqFullThreshold is sizeSTQ - 2*mtuSize."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, stqFullThreshold"
    DEFVAL { 2 }
    ::= { rprIfEntry 12 }

rprIfIdleThreshold OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "MTUs"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates that a MAC is experiencing an adverse rate
         mismatch. When the PTQ depth exceeds this value, 
         the incoming link is considered adversely rate mismatched.

         This attribute specifies the idle-threshold location
         from the top of the PTQ buffer, in MTU size.

         Default value should be 1, which means (sizePTQ - mtuSize)"
    REFERENCE
        "IEEE 802.17 Subclause 7.5.3.2, idleThreshold"
    DEFVAL { 1 }
    ::= { rprIfEntry 13 }

rprIfSesThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (1..512)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the number of E-RPR errors to declare 
         a second as SES-RPR

         The default value is the rounded integer of
         0.000001 * (lineRate * advertisementRatio)."
    REFERENCE
        "IEEE 802.17 Subclause 12.2.2, sesThreshold"
    ::= { rprIfEntry 14 }

rprIfWrapConfig OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the configured protection mode, 
         steering or wrapping, in a MAC that supports both modes.

         If wrap configured bit is set, the station will 
         perform wrap protection during ring failures.

         If the station detects another station on the ring that
         has a protection configuration that conflicts with its own,
         the station will generate a defect to higher layers.

         Default value for wrap preferred is false for steering 
         only stations, and true for stations that implement wrapping."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.5, protConfig"
    ::= { rprIfEntry 15 }

rprIfJumboFramePreferred OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the preference of the manager to support jumbo frame
         in a MAC that supports jumbo frame.

         The station advertises the 'logical and' of rprIfJumboFramePreferred
         and jumbo capable bit in the rprIfMacCapability.

         Default value for jumbo frame preferred is true. i.e. station
         supports jumbo frame."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.5, jumboPrefer"
    DEFVAL { true }
    ::= { rprIfEntry 16 }

rprIfMacOperModes OBJECT-TYPE
    SYNTAX        BITS {
         strictOrder  (0),
         dropBadFcs   (1)
        }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The summary of the Mac operational modes.
         if strictOrder is set, the MAC operates in strict order mode.
         if dropBadFcs is set, frames with bad FCS are dropped."
    REFERENCE
        "IEEE 802.17 Subclause 6.2, forceStrict and copyBadFcs"
    ::= { rprIfEntry 17 }

rprIfRingOperModes OBJECT-TYPE
    SYNTAX        BITS {
         jumboFrames     (0),
         wrapProtection  (1),
         openRing        (2)
        }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The summary of the ring operational modes
         collected through the topology discovery protocol.

         If at least one station doesn't support jumbo frames, 
         the jumboFrame bit in this attribute is set to false.
         Only if all stations support jumbo frames, the bit is true.
         
         If at least one station wasn't configured to wrap, 
         the wrap bit in this attribute is set to false.
         Only if all stations configured to wrap, the bit is true.

         If the ring doesn't complete full loop, the ring is considered
         openRing, with at least one detected edge."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.4, jumboType and topoType"
    ::= { rprIfEntry 18 }

rprIfCurrentStatus OBJECT-TYPE
     SYNTAX       BITS {
                    neighborInconsistency (0),
                    duplicateMac          (1),
                    exceedMaxStations     (2)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates the current status of the RPR interface.
         this attribute is used to generate alarm to the management system."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.9, topoInconsistencyDefect, duplicateSecMacAddressDefect, and maxStationsDefect"
    ::= { rprIfEntry 19 }

rprIfLastChange OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of sysUpTime at the time when any of the following
         attributes changes:
         rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR,
         rprIfProtectionFastTimer, rprIfProtectionSlowTimer, rprIfAtdTimer,
         rprIfKeepaliveTimeout, rprIfFairnessAggressive,
         rprIfSTQFullThreshold, rprIfIdleThreshold, 
         rprIfSesThreshold, rprIfWrapConfig, rprIfJumboFramePreferred, 
         rprIfMacOperModes, rprIfRingOperModes, rprIfCurrentStatus 
         contents of the rprTopoImageEntry."
    ::= { rprIfEntry 20 }

rprIfChanges OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates number of times rprIfLastChange changed.
        
         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    ::= { rprIfEntry 21 }


--
-- RPR statistics management table
--

rprIfStatsControlTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprIfStatsControlEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR statistics management table,
         controls the collection, duration, clearance, and status
         of the MAC statistics.

         The usage of this table is as follows:
         1. In order to clear period of counters (or all periods) of 
            specific counting point (or all counting points) of the 
            RPR MAC, the user should first set the 
            rprIfStatsControlPeriodClear item to specify the period 
            that he would like to clear, and the 
            rprIfStatsControlCountPointClear item to specify the 
            counting point on which he would like to perform the 
            statistics clearance.
            In case that the user specified 'clearSpecificInterval'
            in the rprIfStatsControlPeriodClear item, the user should 
            also set the specific interval to clear by setting 
            rprIfStatsControlIntervalClear.
            After setting these items, the user can activate the 
            clear operation by setting rprIfStatsControlCommitClear
            item to 'commit'.
            The status of the clear operation (done of failed) is 
            indicated by the returned value of rprIfStatsControlCommitClear
            item.
         2. Setting rprIfStatsControlPeriodClear to 'clearAllIntervals' and
            rprIfStatsControlCountPointClear to 'clearWest' (for example)
            will clear all current and previous intervals, and day
            counters of the west side of the RPR MAC.
         3. The IntervalValidData of cleared interval should be set to false.

         All read-write attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprGeneral 2 }

rprIfStatsControlEntry OBJECT-TYPE
    SYNTAX        RprIfStatsControlEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "One such entry for every interface in the ifTable which 
         has an ifType of RPR interface."
    INDEX { rprIfStatsControlIfIndex }
    ::= { rprIfStatsControlTable 1 }

RprIfStatsControlEntry ::= SEQUENCE {
    rprIfStatsControlIfIndex            InterfaceIndex,
    rprIfStatsControlPeriodClear        INTEGER,
    rprIfStatsControlCountPointClear    INTEGER,
    rprIfStatsControlIntervalClear      Unsigned32,
    rprIfStatsControlCommitClear        INTEGER,
    rprIfStatsControlTimeElapsed        Unsigned32,
    rprIfStatsControlValidIntervals     Unsigned32
    }

rprIfStatsControlIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprIfStatsControlEntry 1 }

rprIfStatsControlPeriodClear OBJECT-TYPE
    SYNTAX        INTEGER {
                    idle                  (1),
                    clearAllIntervals     (2),
                    clearCurrent          (3),
                    clearIntervals        (4),
                    clearSpecificInterval (5)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This attribute allows for some or all of the 
         interval statistics for this RPR MAC to be cleared. 
         It does not affect the values of the running counters 
         or the counter values reported through the interface MIB.

         clearSpecificInterval clears the interval indicated by
         rprIfStatsControlIntervalClear.

         Default value for period clear is idle."
    DEFVAL { idle }
    ::= { rprIfStatsControlEntry 2 }

rprIfStatsControlCountPointClear OBJECT-TYPE
    SYNTAX        INTEGER {
                    clearAll           (1),
                    clearWest          (2),
                    clearEast          (3),
                    clearClient        (4)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This attribute allows for a specific counting point of the 
         RPR MAC or all of the RPR MAC counting points to be cleared
         on rprIfStatsControlPeriodClear request.

         Default value for Interface to clear is clearAll, i.e.
         clear statistics of all interfaces."
    DEFVAL { clearAll }
    ::= { rprIfStatsControlEntry 3 }

rprIfStatsControlIntervalClear OBJECT-TYPE
    SYNTAX        Unsigned32 (1..96)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The statistics interval number to clear.
         The interval identified by 1 is the most recently completed
         15 minute interval, and interval identified by N is the
         interval immediately preceding the one identified by N-1.

         Setting rprIfStatsControlPeriodClear to clearSpecificInterval will
         clear the interval that is indicated by this object."
    ::= { rprIfStatsControlEntry 4 }

rprIfStatsControlCommitClear OBJECT-TYPE
    SYNTAX  INTEGER {
                      commit        (1),  -- write only
                      commitDone    (2),  -- read only
                      commitFailed  (3)   -- read only
                    }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Sends a commit with input parameters to specify the 
         Period (rprIfStatsControlPeriodClear),
         count point (rprIfStatsControlCountPointClear) and
         specific interval (rprIfStatsControlIntervalClear) to clear.

         If the clear operation succeeds this attribute will have 
         the value commitDone(2) when read.
         If the clear operation fails this attribute will have 
         the value commitFailed(3) when read."
    ::= { rprIfStatsControlEntry 5 }

rprIfStatsControlTimeElapsed OBJECT-TYPE
    SYNTAX        Unsigned32 (0..899)
    UNITS         "Seconds" 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of seconds, including partial seconds, that
         have elapsed since the beginning of the current
         measurement interval. If, for some reason, such as an
         adjustment in the system's time-of-day clock, the current
         interval exceeds the maximum value, the agent will return
         the maximum value."
    ::= { rprIfStatsControlEntry 6 }

rprIfStatsControlValidIntervals OBJECT-TYPE
    SYNTAX        Unsigned32 (0..96)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
       "The number of previous 15-minute intervals for
        which data was collected.
        An RPR interface must be capable of supporting at least n
        intervals.
        The minimum value of n is 4. The default of n is 32.
        The maximum value of n is 96.
        The value will be <n> unless the measurement was
        (re-)started within the last (<n>*15) minutes, in which
        case the value will be the number of complete 15
        minute intervals for which the agent has at least
        some data. In certain cases (e.g., in the case
        where the agent is a proxy) it is possible that some
        intervals are unavailable.  In this case, this
        interval is the maximum interval number for
        which data is available. "
    ::= { rprIfStatsControlEntry 7 }

--
-- RPR span table
--

rprSpanTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR interface Span table.

         All read-write attributes in this table are non-volatile,
         i.e. will be retained across system reset."
    ::= { rprGeneral 3 }

rprSpanEntry OBJECT-TYPE
    SYNTAX        RprSpanEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "One such entry for every span of an RPR interface."
    INDEX { rprSpanIfIndex,
            rprSpanId   }
    ::= { rprSpanTable 1 }

RprSpanEntry ::= SEQUENCE {
    rprSpanIfIndex                        InterfaceIndex,
    rprSpanId                             RprSpan,
    rprSpanLowerLayerIfIndex              InterfaceIndexOrZero,
    rprSpanTotalRingletReservedRate       Unsigned32,
    rprSpanCurrentStatus                  BITS,
    rprSpanLastChange                     TimeStamp,
    rprSpanChanges                        Counter32
    }

rprSpanIfIndex  OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprSpanEntry 1 }

rprSpanId OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Indicates the span interface of the RPR MAC. Each RPR 
         span is connected to both ringlet0 and ringlet1.
         The east span receives from ringlet1 and transmits through 
         ringlet0.
         The west span receives from ringlet0 and transmits through
         ringlet1."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, myRi"
    ::= { rprSpanEntry 2 }

rprSpanLowerLayerIfIndex  OBJECT-TYPE
    SYNTAX        InterfaceIndexOrZero
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The ifIndex of interface which is below the RPR layer in this
         span. A value of zero indicates an interface index that has 
         yet to be determined"
    REFERENCE
        "RFC 2863, ifIndex"
    ::= { rprSpanEntry 3 }

rprSpanTotalRingletReservedRate OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Mb/s"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The total reserved subclassA0 bandwidth on the ringlet.
         This variable is used by the fairness module
         to determine the total reclaimable bandwidth."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.4, unreservedRate"
    ::= { rprSpanEntry 4 }

rprSpanCurrentStatus OBJECT-TYPE
    SYNTAX        BITS {
                     keepAliveTimeout (0),
                     miscabling       (1),
                     phyLinkDegrade   (2),
                     phyLinkFail      (3)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates the current status of the RPR span.
         this attribute is used to generate alarm to the management system."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, keepaliveTime, 11.2.9, miscablingDefect, and 8.2.3.2, LINK_STATUS"
    ::= { rprSpanEntry 5 }

rprSpanLastChange OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of sysUpTime at the time when any of the following
         attributes changes:
         rprSpanCurrentStatus,
         rprSpanProtectionNeighborValid, rprSpanProtectionHoldOffTimer,
         rprSpanProtectionCommand, rprSpanProtectionCount."
    ::= { rprSpanEntry 6 }

rprSpanChanges OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates number of times rprSpanLastChange changed.

         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    ::= { rprSpanEntry 7 }

--
-- RPR span protection table
--

rprSpanProtectionTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanProtectionEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR interface Span protection management table.

         All read-write attributes in this table are non-volatile,
         i.e. will be retained across system reset."
    ::= { rprGeneral 4 }

rprSpanProtectionEntry OBJECT-TYPE
    SYNTAX        RprSpanProtectionEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "One such entry for every span of an RPR interface."
    INDEX { rprSpanProtectionIfIndex,
            rprSpanProtectionSpan }
    ::= { rprSpanProtectionTable 1 }

RprSpanProtectionEntry ::= SEQUENCE {
    rprSpanProtectionIfIndex              InterfaceIndex,
    rprSpanProtectionSpan                 RprSpan,
    rprSpanProtectionNeighborValid        TruthValue,
    rprSpanProtectionHoldOffTimer         Unsigned32,
    rprSpanProtectionCommand              INTEGER,
    rprSpanProtectionCount                Counter32,
    rprSpanProtectionDuration             Counter32,
    rprSpanProtectionLastActivationTime   TimeStamp
    }

rprSpanProtectionIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprSpanProtectionEntry 1 }

rprSpanProtectionSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The Span for this entry."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2. myRi"
    ::= { rprSpanProtectionEntry 2 }

rprSpanProtectionNeighborValid  OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates whether the neighbor address is active or former.
         true value for active, false for former"
    REFERENCE
        "IEEE 802.17 Subclause 11.2.5, lastNeighborMac"
    ::= { rprSpanProtectionEntry 3 }

rprSpanProtectionHoldOffTimer OBJECT-TYPE
    SYNTAX        Unsigned32 (0..500)
    UNITS         "milliseconds" 
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The period that RPR gives to lower layer to perform
         protection, before it activates its protection mechanism.

         Default value of hold off timer is 0."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, holdOffTimeout"
    DEFVAL { 0 }
    ::= { rprSpanProtectionEntry 4 }

rprSpanProtectionCommand OBJECT-TYPE
    SYNTAX        INTEGER {
                    idle            (1),
                    manualSwitch    (2),
                    forcedSwitch    (3)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The protection mode requested by management for the local 
         station that can affect the protection status of the RPR
         station, according to the set of rules describing the RPR 
         protection.

         When read, this object returns the last command written 
         unless it has been preempted, or idle if no command has been 
         written to this interface span since initialization.


         There is no pending of commands, that is if a command has 
         been preempted by a failure, when the failure clears the 
         command is not executed.

         If the command cannot be executed because an equal or \
         higher priority request is in effect, an error is returned.

         writing idle to a span that has no pending protection
         command, has no affect. An idle clears an active WTR state.

         The protection commands (arranged in ascending priority 
         order) are:
    
         idle
         This command clears the protection for the specified 
         interface span.
         This value should be returned by a read request when no 
         protection command has been written to the object.

         manualSwitch
         A protection command on each end of a specified span. This 
         command doesn't have precedence over automatic protection, 
         and therefore it can't preempt
         an existing automatic protection request.

         forcedSwitch
         A command on each end of a specified span. This command has
         precedence over automatic protection, and therefore it can 
         preempt an existing automatic protection request.

         Default value of protection command is idle."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.3, adminRequestProtection"
    DEFVAL { idle }
    ::= { rprSpanProtectionEntry 5 }

rprSpanProtectionCount OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transitions from idle state to active
         protection state.

         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    REFERENCE
        "IEEE 802.17 Subclause 11.6.5.5, IndicateEdgeState()"
    ::= { rprSpanProtectionEntry 6 }

rprSpanProtectionDuration OBJECT-TYPE
    SYNTAX        Counter32
    UNITS         "seconds"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The total amount of time protection was active on the
         span interface.

         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    REFERENCE
        "IEEE 802.17 Subclause 11.6.5.5, IndicateEdgeState()"
    ::= { rprSpanProtectionEntry 7 }

rprSpanProtectionLastActivationTime OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of sysUpTime at the time of the last protection
         activation."
    REFERENCE
        "IEEE 802.17 Subclause 11.6.5.5, IndicateEdgeState()"
    ::= { rprSpanProtectionEntry 8 }


--
-- RPR topology table
--

rprTopoImageTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprTopoImageEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A topology map that details the list of stations on the RPR
         ringlets.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprProtocols 1 }

rprTopoImageEntry OBJECT-TYPE
    SYNTAX        RprTopoImageEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each entry contains information specific to a particular
         station on the ring.

         The table has at least one entry for the station itself,
         this entry indicates zero hops on each ringlet."
    INDEX { rprTopoImageIfIndex,
            rprTopoImageMacAddress }
    ::= { rprTopoImageTable 1 }

RprTopoImageEntry ::= SEQUENCE {
    rprTopoImageIfIndex                  InterfaceIndex,
    rprTopoImageMacAddress               MacAddress,
    rprTopoImageSecMacAddress1           MacAddress,
    rprTopoImageSecMacAddress2           MacAddress,
    rprTopoImageStationIfIndex           InterfaceIndex,
    rprTopoImageStationName              SnmpAdminString,
    rprTopoImageInetAddressType          InetAddressType,
    rprTopoImageInetAddress              InetAddress,
    rprTopoImageCapability               BITS,
    rprTopoImageRinglet0Hops             Integer32,
    rprTopoImageRinglet0ReservedRate     Unsigned32,
    rprTopoImageRinglet1Hops             Integer32,
    rprTopoImageRinglet1ReservedRate     Unsigned32,
    rprTopoImageWestProtectionStatus     RprProtectionStatus,
    rprTopoImageWestWeight               Unsigned32,
    rprTopoImageEastProtectionStatus     RprProtectionStatus,
    rprTopoImageEastWeight               Unsigned32,
    rprTopoImageStatus                   BITS
    }

rprTopoImageIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprTopoImageEntry 1 }

rprTopoImageMacAddress OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The 48-bit MAC address of the station."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, macAddress"
    ::= { rprTopoImageEntry 2 }

rprTopoImageSecMacAddress1 OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The 48-bit first secondary MAC address of the station.

         Default and unused value is FF:FF:FF:FF:FF:FF"
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, secMac"
    ::= { rprTopoImageEntry 3 }

rprTopoImageSecMacAddress2 OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The 48-bit second secondary MAC address of the station.

         Default and unused value is FF:FF:FF:FF:FF:FF"
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, secMac"
    ::= { rprTopoImageEntry 4 }

rprTopoImageStationIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The station ifIndex."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, interfaceIndex"
    ::= { rprTopoImageEntry 5 }

rprTopoImageStationName OBJECT-TYPE
    SYNTAX        SnmpAdminString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The operator assigned station name."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, stationName"
    ::= { rprTopoImageEntry 6 }

rprTopoImageInetAddressType OBJECT-TYPE
    SYNTAX        InetAddressType
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Denotes the address type of the station INET address
         It should be set to 'unknown' if station INET address
         is not known."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, managementAddressType"
    ::= { rprTopoImageEntry 7 }

rprTopoImageInetAddress OBJECT-TYPE
   SYNTAX        InetAddress
   MAX-ACCESS    read-only
   STATUS        current
   DESCRIPTION
        "This object contains the value of of the station 
         IP (v4 or V6) address.
         The format of this address is specified by the value 
         of the corresponding rprTopoImageInetAddressType object.

         If the address type is unknown, then this object contains the
         zero-length OCTET-STRING."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, managementIpAddr"
   ::= { rprTopoImageEntry 8 }

rprTopoImageCapability OBJECT-TYPE
    SYNTAX        BITS {
         jumboFrames                  (0),
         wrapProtection               (1),
         supportsConservativeFairness (2)

        }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
       "Indicates the capabilities that the MAC supports.

        jumboFrames - Indicates whether the MAC capable of receiving,
        transmitting and transiting jumbo frames.

        wrapProtection - Indicates whether the MAC configured to wrap
        protection.

        supportsConservativeFairness - indicates the MAC supports
        conservative fairness algorithm."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, jumboPrefer, protConfig, and conservativeMode"
    ::= { rprTopoImageEntry 9 }

rprTopoImageRinglet0Hops OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of hops to this station through ringlet0.

         The self station is indicated with zero hops.
         A non reachable station is indicated with -1 value."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, hops"
    ::= { rprTopoImageEntry 10 }

rprTopoImageRinglet0ReservedRate OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Mb/s"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The amount of A0 traffic that this station adds on ringlet0,
         in Mb/s units."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, reservedRate"
    ::= { rprTopoImageEntry 11 }

rprTopoImageRinglet1Hops OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of hops to this station through ringlet1.

         The self station is indicated with zero hops.
         A non reachable station is indicated with -1 value."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, hops"
    ::= { rprTopoImageEntry 12 }

rprTopoImageRinglet1ReservedRate OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Mb/s"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The amount of A0 traffic that this station adds on ringlet1,
         in Mb/s units."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, reservedRate"
    ::= { rprTopoImageEntry 13 }

rprTopoImageWestProtectionStatus OBJECT-TYPE
    SYNTAX        RprProtectionStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The current protection status of the West span."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, spanProtState"
    ::= { rprTopoImageEntry 14 }

rprTopoImageWestWeight OBJECT-TYPE
    SYNTAX        Unsigned32 (1..255)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The weight of the station on the west span.
         used for weighted fairness."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, weight"
    ::= { rprTopoImageEntry 15 }

rprTopoImageEastProtectionStatus OBJECT-TYPE
    SYNTAX        RprProtectionStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The current protection status of the east span."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, spanProtState"
    ::= { rprTopoImageEntry 16 }

rprTopoImageEastWeight OBJECT-TYPE
    SYNTAX        Unsigned32 (1..255)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The weight of the station on the east span.
         Used for weighted fairness."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, weight"
    ::= { rprTopoImageEntry 17 }

rprTopoImageStatus OBJECT-TYPE
    SYNTAX        BITS {
                     reachableRinglet0            (0),
                     reachableRinglet1            (1),
                     wrapActiveWest               (2),
                     wrapActiveEast               (3),
                     receivedBadFcs               (4),
                     receivedMultichokeFairness   (5)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Status of the station,
         the reachability of station through ringlet0 and ringlet1,
         wrap active on the station spans,
         events of reception frames with bad FCS,
         events of reception multichoke fairness frames."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.6, reachable, protConfig, spanProtState, badFcsUser, and multichokeUser"
    ::= { rprTopoImageEntry 18 }

--
-- The RPR Fairness table
--

rprFairnessTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprFairnessEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A table of RPR Fairness per RPR span.

         All read-write attributes in this table are non-volatile,
         i.e. will be retained across system reset."
    ::= { rprProtocols 2 }

rprFairnessEntry OBJECT-TYPE
    SYNTAX        RprFairnessEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A fairness parameters for a particular ringlet of the
         an RPR interface."
    INDEX { rprFairnessIfIndex,
            rprFairnessRinglet }
    ::= { rprFairnessTable 1 }

RprFairnessEntry ::= SEQUENCE {
    rprFairnessIfIndex                InterfaceIndex,
    rprFairnessRinglet                INTEGER,
    rprFairnessRingletWeight          Unsigned32,
    rprFairnessReservedRate           Unsigned32,
    rprFairnessMaxAllowed             Unsigned32,
    rprFairnessAgeCoef                Unsigned32,
    rprFairnessRampCoef               Unsigned32,
    rprFairnessLpCoef                 Unsigned32,
    rprFairnessAdvertisementRatio     Unsigned32,
    rprFairnessMcffReportCoef         Unsigned32,
    rprFairnessActiveWeightsCoef      Unsigned32,
    rprFairnessSTQHighThreshold       Unsigned32,
    rprFairnessSTQMedThreshold        Unsigned32,
    rprFairnessSTQLowThreshold        Unsigned32,
    rprFairnessRateHighThreshold      Unsigned32,
    rprFairnessRateLowThreshold       Unsigned32,
    rprFairnessResetWaterMarks        INTEGER,
    rprFairnessSTQHighWaterMark       Unsigned32,
    rprFairnessSTQLowWaterMark        Unsigned32,
    rprFairnessLastChange             TimeStamp,
    rprFairnessChanges                Counter32
    }

rprFairnessIfIndex  OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprFairnessEntry 1 }

rprFairnessRinglet OBJECT-TYPE
    SYNTAX        INTEGER {
                    ringlet0    (1),
                    ringlet1    (2)
                  }
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ringlet for which this row contains information.

         ringlet0 is the transmission of the east span and the 
         reception of the west span,
         ringlet1 is the transmission of the west span and the 
         reception of the east span"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.2, myRi"
    ::= { rprFairnessEntry 2 }

rprFairnessRingletWeight OBJECT-TYPE
    SYNTAX        Unsigned32 (1..255)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Weight assigned to fairness to permit the scaling of 
         fair rate values among stations on the ringlet.
         This allows one station to use a larger share of available
         capacity than another station without violating fairness 
         principles.

         The allowed range is [1, 255]. The default value is 1."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, localWeight"
    DEFVAL { 1 }
    ::= { rprFairnessEntry 3 }

rprFairnessReservedRate OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Mb/s"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The amount of A0 traffic that this station adds that ringlet,
         in Mb/s units.

         Default value for A0 reserved rate is 0 Mb/s."
    REFERENCE
        "IEEE 802.17 Subclause 11.2.4, reservedRate"
    DEFVAL { 0 }
    ::= { rprFairnessEntry 4 }

rprFairnessMaxAllowed OBJECT-TYPE
    SYNTAX        Unsigned32
    UNITS         "Mb/s"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The maximum value that the station is allowed to transmit
         local excess traffic to the ringlet. The default value
         is the physical ring rate."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, maxAllowedRate"
    ::= { rprFairnessEntry 5 }

rprFairnessAgeCoef OBJECT-TYPE
    SYNTAX        Unsigned32 (0..4)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The coefficient used by the aging procedure to specify 
         the relative weights assigned to 
         (a) the change in the value of a rate-counter during 
             the most recent agingInterval and
         (b) the value of the rate-counter at the end of the previous
             agingInterval.

         The value is interpreted as 2 raised to the power
         specified by this attribute.

         The default value is 2, giving an aging coefficient
         of 2**2, or 4."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, ageCoef"
    DEFVAL { 2 }
    ::= { rprFairnessEntry 6 }

rprFairnessRampCoef OBJECT-TYPE
    SYNTAX        Unsigned32 (4..9)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The coefficient used for ramping a rate. 
         

         The value is interpreted as 2 raised to the power
         specified by this attribute.

         The default value is 6, giving a low-pass coefficient
         of 2**6, or 64."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, rampUpCoef"
    DEFVAL { 6 }
    ::= { rprFairnessEntry 7 }

rprFairnessLpCoef OBJECT-TYPE
    SYNTAX        Unsigned32 (4..9)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The coefficient used by the low-pass filter procedure
         to specify the relative weights applied to
         (a) the increase in the rate-count value during the most 
             recent agingInterval and 
         (b) the previous low-pass filtered rate.
         The former is assigned a weight of 1 and the latter a 
         weight of (lpCoef-1).

         The value is interpreted as 2 raised to the power
         specified by this attribute.

         The default value is 6, giving a low-pass coefficient
         of 2**6, or 64."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, lpCoef"
    DEFVAL { 6 }
    ::= { rprFairnessEntry 8 }

rprFairnessAdvertisementRatio OBJECT-TYPE
    SYNTAX        Unsigned32 (1..40)
    UNITS         "0.00025"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The ratio between the link capacity reserved for fairness 
         control messages and the total link capacity.

         Default value of fairness advertisement ratio is 5 units
         of 0.00025, i.e 0.00125."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, advertisementRatio"
    DEFVAL { 5 }
    ::= { rprFairnessEntry 9 }

rprFairnessMcffReportCoef OBJECT-TYPE
    SYNTAX        Unsigned32 (8..512)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the number of SCFF advertisingIntervals that
         elapse between the sending of successive MCFFs,
         This value allows the interval between sending MCFFs 
         to be established as MCFF_reportingInterval =
         rprFairnessMcffReportCoef * SCFF_avertisingInterval.

         The default value is 10."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, reportCoef"
    DEFVAL { 10 }
    ::= { rprFairnessEntry 10 }

rprFairnessActiveWeightsCoef OBJECT-TYPE
    SYNTAX        Unsigned32 (8..512)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the number of agingIntervals that elapse between
         successive computations of activeWeights.
         This value allows the interval between computations of 
         activeWeights to be established as
         activeWeightsInterval = activeWeightsCoef * agingInterval.

         The default value is 64."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, activeWeightsCoef"
    DEFVAL { 64 }
    ::= { rprFairnessEntry 11 }

rprFairnessSTQHighThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (0..1000)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A level of STQ occupancy at or above which CSFE frames are no
         longer admitted. Defined only for a dual transit-queue 
         implementation.

         This attribute specifies the high threshold location
         in percentage of the STQ size.
         The allowed range is [2*mtuSize, stqFullThreshold -mtuSize].
         The default value is 0.25*stqFullThreshold."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, stqHighThreshold"
    DEFVAL { 250 }
    ::= { rprFairnessEntry 12 }

rprFairnessSTQMedThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (0..1000)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A level of buffer occupancy in a dual-queue deployment,
         at or above which congestion on the outbound link is declared.

         This attribute specifies the medium threshold location
         in percentage of the STQ size.
         The allowed range is [stqLowThreshold + mtuSize,
                               stqHighThreshold - mtuSize].
         The default value is 0.5 * (stqHighThreshold + stqLowThreshold)."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, stqMedThreshold"
    DEFVAL { 187 }
    ::= { rprFairnessEntry 13 }

rprFairnessSTQLowThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (0..1000)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "A level of STQ occupancy at or above which congestion on 
         the outbound link is imminent.
         Defined only for dual transit-queue implementations. 

         This attribute specifies the low threshold location
         in percentage of the STQ size.
         The range is [mtuSize, stqHighThreshold -mtuSize].
         The default value is 0.5*stqHighThreshold."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, stqLowThreshold"
    DEFVAL { 125 }
    ::= { rprFairnessEntry 14 }

rprFairnessRateHighThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (400..990)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Rate at or above which congestion on the outbound link 
         is declared.

         The range is [0.4 * unreservedRate, 0.99 * unreservedRate].
         The default value is 0.95 * unreservedRate."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, rateHighThreshold"
    DEFVAL { 950 }
    ::= { rprFairnessEntry 15 }

rprFairnessRateLowThreshold OBJECT-TYPE
    SYNTAX        Unsigned32 (500..990)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Rate at or above which congestion on the outbound link
         is imminent.

         The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold].
         The default value is 0.9 * rateHighThreshold"
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, rateLowThreshold"
    DEFVAL { 900 }
    ::= { rprFairnessEntry 16 }

rprFairnessResetWaterMarks OBJECT-TYPE
    SYNTAX        INTEGER {
                    idle            (1),
                    resetWaterMarks (2)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Write resetWaterMarks to this attribute to reset 
         the STQ water marks to the current occupancy.

         Default value is idle"
    DEFVAL  { idle }
    ::= { rprFairnessEntry 17 }

rprFairnessSTQHighWaterMark OBJECT-TYPE
    SYNTAX        Unsigned32 (0..1000)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The highest level of STQ occupancy since the last reset
         of this value, in percentage of the STQ size."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, stqHighWatermark"
    ::= { rprFairnessEntry 18 }

rprFairnessSTQLowWaterMark OBJECT-TYPE
    SYNTAX        Unsigned32 (0..1000)
    UNITS         "Tenth of percent"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The lowest level of STQ occupancy since the last reset of
         this value, in percentage of the STQ size."
    REFERENCE
        "IEEE 802.17 Subclause 10.2.2, stqLowWatermark"
    ::= { rprFairnessEntry 19 }

rprFairnessLastChange OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of sysUpTime at the time when any of the following
         attributes changes:
         rprFairnessRingletWeight, rprFairnessReservedRate,
         rprFairnessMaxAllowed, rprFairnessAgeCoef, rprFairnessRampCoef,
         rprFairnessLpCoef, rprFairnessAdvertisementRatio,
         rprFairnessSTQHighThreshold, rprFairnessSTQLowThreshold
         rprFairnessResetWaterMarks."
    ::= { rprFairnessEntry 20 }

rprFairnessChanges OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates number of times rprFairnessLastChange changed.

         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    ::= { rprFairnessEntry 21 }


--
-- The RPR OAM actions table
--

rprOamTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprOamEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A table of RPR OAM actions.
         The table is designed to support a one action at a time
         on an RPR interface.

         All read-write attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprProtocols 3 }

rprOamEntry OBJECT-TYPE
    SYNTAX        RprOamEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "OAM Echo and Flush control for an RPR interface"
    INDEX { rprOamIfIndex }
    ::= { rprOamTable 1 }

RprOamEntry ::= SEQUENCE {
    rprOamIfIndex           InterfaceIndex,
    rprOamActionType        INTEGER,
    rprOamDestAddress       MacAddress,
    rprOamRequestRinglet    RprOamRinglet,
    rprOamResponseRinglet   RprOamRinglet,
    rprOamClassOfService    INTEGER,
    rprOamUserData          OCTET STRING,
    rprOamProtected         TruthValue,
    rprOamRequestCount      Unsigned32,
    rprOamTimeout           Unsigned32,
    rprOamControl           INTEGER,
    rprOamResponseCount     Unsigned32,
    rprOamAvResponseTime    Unsigned32,
    rprOamResponseStatus    INTEGER
    }

rprOamIfIndex  OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprOamEntry 1 }

rprOamActionType OBJECT-TYPE
    SYNTAX        INTEGER {
                    echo  (1),
                    flush (2)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The type of OAM action.
         The valid values for this object are:
         (1) echo (2) flush."
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1, OAM_ECHO_REQ, and 12.4.3, OAM_FLUSH_REQ"
    DEFVAL { echo }
    ::= { rprOamEntry  2 }

rprOamDestAddress OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The 48-bit MAC address of the destination station of OAM
         session."
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1 and 12.4.3, destination_address"
    ::= { rprOamEntry  3 }

rprOamRequestRinglet OBJECT-TYPE
    SYNTAX        RprOamRinglet
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
       "The ringlet ID on which the OAM request should be sent."
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1 and 12.4.3, ringlet_id"
    DEFVAL { default }
    ::= { rprOamEntry  4 }

rprOamResponseRinglet OBJECT-TYPE
    SYNTAX        RprOamRinglet
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
       "The ringlet ID on which the OAM response should be replied."
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1, response_ringlet"
    DEFVAL { default }
    ::= { rprOamEntry  5 }

rprOamClassOfService OBJECT-TYPE
    SYNTAX        INTEGER {
                    classA   (1),
                    classB   (2),
                    classC   (3)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The class-of-service of OAM session frames"
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1 and 12.4.3, service_class"
    DEFVAL { classC }
    ::= { rprOamEntry 6 }

rprOamUserData OBJECT-TYPE
    SYNTAX        OCTET STRING (SIZE (0..1024))
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "The operator assigned user specific data."
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1 and 12.4.3, user_data"
    DEFVAL { "" }
    ::= { rprOamEntry 7 }

rprOamProtected OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates whether the OAM action should be protected.

         In a wrapping ring,
         If true, the WE (wrap eligible) bit of the OAM action 
         frame is set to 1.
         Otherwise, the WE bit is set to 0.

         In steering ring,
         If true, in case of failure on the requested ringlet between
         the source and the destination stations, the OAM action frame
         will be steered to the alternative ringlet.
         Otherwise, the OAM action frame will be sent through the requested
         ringlet regardless of its protection state."
    REFERENCE
        "IEEE 802.17 Subclause 12.4.1 and 12.4.3, mac_protection"
    DEFVAL { false }
    ::= { rprOamEntry 8 }

rprOamRequestCount OBJECT-TYPE
    SYNTAX        Unsigned32 (0..65535)
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the number of OAM requests to send.

         Default value of OAM request action is 1."
    DEFVAL { 1 }
    ::= { rprOamEntry 9 }

rprOamTimeout OBJECT-TYPE
    SYNTAX        Unsigned32 (1..10000)
    UNITS         "10usec"
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Indicates the timer to declare OAM action timeout,
         in 10usec units.

         Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)"
    DEFVAL { 500 }
    ::= { rprOamEntry 10 }

rprOamControl OBJECT-TYPE
    SYNTAX        INTEGER {
                    idle     (1),
                    active   (2),
                    abort    (3)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Control of an OAM action.
        The valid values for this object are:
        (1) idle (2) active (3) abort.

        Default value of OAM control is idle."
    DEFVAL { idle }
    ::= { rprOamEntry 11 }

rprOamResponseCount OBJECT-TYPE
    SYNTAX        Unsigned32 (0..65535)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Indicates the number of OAM actions responses received."
    ::= { rprOamEntry 12 }

rprOamAvResponseTime OBJECT-TYPE
    SYNTAX        Unsigned32 (0..65535)
    UNITS         "10usec"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Average response time to receive the OAM reply."
    ::= { rprOamEntry 13 }

rprOamResponseStatus OBJECT-TYPE
    SYNTAX        INTEGER {
                    unknown   (1),
                    inProcess (2),
                    error     (3),
                    success   (4)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Status of an OAM action.
        The valid values for this object are:
        (1) unknown (2) inProcess (3) error (4) success.

        The action status is success if at least 90% of the responses
        were received till timeout."
    ::= { rprOamEntry 14 }


--
-- RPR changes summary group  
--

rprIfChangeSummaryObject OBJECT IDENTIFIER ::= { rprGeneral 5 }

rprIfChangeSummaryNumInterfaces OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Number of RPR interfaces on this device."
    ::= {  rprIfChangeSummaryObject 1 }

rprIfChangeSummaryIfLastChange OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Latest timestamp when any instance of rprIfLastChange changed."
    ::= { rprIfChangeSummaryObject 2 }

rprIfChangeSummaryIfChanges OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Number of times any instance of rprIfChanges changed.
        
         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    ::= { rprIfChangeSummaryObject 3 }

rprIfChangeSummarySpanLastChange OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Latest timestamp when any instance of rprSpanLastChange changed."
    ::= { rprIfChangeSummaryObject 4 }

rprIfChangeSummarySpanChanges OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Number of times any instance of rprSpanChanges changed.

         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    ::= { rprIfChangeSummaryObject 5 }

rprIfChangeSummaryFairnessLastChange OBJECT-TYPE
    SYNTAX        TimeStamp
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Latest timestamp when any instance of rprFairnessLastChange changed."
    ::= { rprIfChangeSummaryObject 6 }

rprIfChangeSummaryFairnessChanges OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Number of times any instance of rprFairnessChanges changed.

         The discontinued counter value is indicated 
         by the ifCounterDiscontinuityTime value."
    ::= { rprIfChangeSummaryObject 7 }


--
-- RPR ring interface current counters table
--

rprSpanCountersCurrentTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanCountersCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
       "The RPR MAC Span interface current counters table.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprSpanCounters 1 }

rprSpanCountersCurrentEntry OBJECT-TYPE
    SYNTAX        RprSpanCountersCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Frames and octets statistics for the current interval for
         the RPR MAC Span interface.
         The corresponding instance of rprIfStatsControlTimeElapsed
         indicates the number of seconds which have elapsed 
         so far in the current interval."
    INDEX { rprSpanCurrentIfIndex,
            rprSpanCurrentSpan }
    ::= { rprSpanCountersCurrentTable 1 }

RprSpanCountersCurrentEntry ::= SEQUENCE {
    rprSpanCurrentIfIndex                 InterfaceIndex,
    rprSpanCurrentSpan                    RprSpan,

    rprSpanCurrentInUcastClassAFrames     HCPerfCurrentCount,
    rprSpanCurrentInUcastClassAOctets     HCPerfCurrentCount,
    rprSpanCurrentInUcastClassBCirFrames  HCPerfCurrentCount,
    rprSpanCurrentInUcastClassBCirOctets  HCPerfCurrentCount,
    rprSpanCurrentInUcastClassBEirFrames  HCPerfCurrentCount,
    rprSpanCurrentInUcastClassBEirOctets  HCPerfCurrentCount,
    rprSpanCurrentInUcastClassCFrames     HCPerfCurrentCount,
    rprSpanCurrentInUcastClassCOctets     HCPerfCurrentCount,

    rprSpanCurrentInMcastClassAFrames     HCPerfCurrentCount,
    rprSpanCurrentInMcastClassAOctets     HCPerfCurrentCount,
    rprSpanCurrentInMcastClassBCirFrames  HCPerfCurrentCount,
    rprSpanCurrentInMcastClassBCirOctets  HCPerfCurrentCount,
    rprSpanCurrentInMcastClassBEirFrames  HCPerfCurrentCount,
    rprSpanCurrentInMcastClassBEirOctets  HCPerfCurrentCount,
    rprSpanCurrentInMcastClassCFrames     HCPerfCurrentCount,
    rprSpanCurrentInMcastClassCOctets     HCPerfCurrentCount,

    rprSpanCurrentOutUcastClassAFrames    HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassAOctets    HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassBCirFrames HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassBCirOctets HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassBEirFrames HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassBEirOctets HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassCFrames    HCPerfCurrentCount,
    rprSpanCurrentOutUcastClassCOctets    HCPerfCurrentCount,

    rprSpanCurrentOutMcastClassAFrames    HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassAOctets    HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassBCirFrames HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassBCirOctets HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassBEirFrames HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassBEirOctets HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassCFrames    HCPerfCurrentCount,
    rprSpanCurrentOutMcastClassCOctets    HCPerfCurrentCount
    }

rprSpanCurrentIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprSpanCountersCurrentEntry 1 }

rprSpanCurrentSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this
         row contains information."
    ::= { rprSpanCountersCurrentEntry 2 }

rprSpanCurrentInUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 3 }

rprSpanCurrentInUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA unicast octets,
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 4 }

rprSpanCurrentInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 5 }

rprSpanCurrentInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 6 }

rprSpanCurrentInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 7 }

rprSpanCurrentInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 8 }

rprSpanCurrentInUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 9 }

rprSpanCurrentInUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 10 }

rprSpanCurrentInMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA multicast and
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 11 }

rprSpanCurrentInMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA multicast and
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 12 }

rprSpanCurrentInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR multicast and 
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 13 }

rprSpanCurrentInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR multicast and
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 14 }

rprSpanCurrentInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR multicast and
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 15 }

rprSpanCurrentInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR multicast and
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 16 }

rprSpanCurrentInMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC multicast and 
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 17 }

rprSpanCurrentInMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC multicast and
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 18 }

rprSpanCurrentOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 19 }

rprSpanCurrentOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 20 }

rprSpanCurrentOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 21 }

rprSpanCurrentOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 22 }

rprSpanCurrentOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 23 }

rprSpanCurrentOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 24 }

rprSpanCurrentOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC unicast frames
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 25 }

rprSpanCurrentOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC unicast octets
         in the current interval."
    ::= { rprSpanCountersCurrentEntry 26 }

rprSpanCurrentOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA multicast and 
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 27 }

rprSpanCurrentOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA multicast and 
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 28 }

rprSpanCurrentOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR multicast and
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 29 }

rprSpanCurrentOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR multicast and
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 30 }

rprSpanCurrentOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR multicast and
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 31 }

rprSpanCurrentOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR multicast and
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 32 }

rprSpanCurrentOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC multicast and
         broadcast frames in the current interval."
    ::= { rprSpanCountersCurrentEntry 33 }

rprSpanCurrentOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC multicast and 
         broadcast octets in the current interval."
    ::= { rprSpanCountersCurrentEntry 34 }


--
-- RPR ring interface interval counters
--

rprSpanCountersIntervalTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanCountersIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "The RPR MAC Span interface interval counters table.

       All attributes in this table are volatile,
       i.e. will be cleared on system reset."
    ::= { rprSpanCounters 2 }

rprSpanCountersIntervalEntry OBJECT-TYPE
    SYNTAX        RprSpanCountersIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Frames and octets statistics collected for a particular 
         interval for the RPR MAC Span interface of a 
         particular span of a particular RPR interface.
         The corresponding instance of rprIfValidIntervals 
         indicates the number of intervals for which the set of 
         statistics is available."
    INDEX { rprSpanIntervalIfIndex,
            rprSpanIntervalSpan,
            rprSpanIntervalNumber }
    ::= { rprSpanCountersIntervalTable 1 }

RprSpanCountersIntervalEntry ::= SEQUENCE {
    rprSpanIntervalIfIndex                  InterfaceIndex,
    rprSpanIntervalSpan                     RprSpan,
    rprSpanIntervalNumber                   Unsigned32,
    rprSpanIntervalValidData                TruthValue,
    rprSpanIntervalTimeElapsed              Unsigned32,
    rprSpanIntervalStartTime                DateAndTime,

    rprSpanIntervalInUcastClassAFrames      HCPerfIntervalCount,
    rprSpanIntervalInUcastClassAOctets      HCPerfIntervalCount,
    rprSpanIntervalInUcastClassBCirFrames   HCPerfIntervalCount,
    rprSpanIntervalInUcastClassBCirOctets   HCPerfIntervalCount,
    rprSpanIntervalInUcastClassBEirFrames   HCPerfIntervalCount,
    rprSpanIntervalInUcastClassBEirOctets   HCPerfIntervalCount,
    rprSpanIntervalInUcastClassCFrames      HCPerfIntervalCount,
    rprSpanIntervalInUcastClassCOctets      HCPerfIntervalCount,

    rprSpanIntervalInMcastClassAFrames      HCPerfIntervalCount,
    rprSpanIntervalInMcastClassAOctets      HCPerfIntervalCount,
    rprSpanIntervalInMcastClassBCirFrames   HCPerfIntervalCount,
    rprSpanIntervalInMcastClassBCirOctets   HCPerfIntervalCount,
    rprSpanIntervalInMcastClassBEirFrames   HCPerfIntervalCount,
    rprSpanIntervalInMcastClassBEirOctets   HCPerfIntervalCount,
    rprSpanIntervalInMcastClassCFrames      HCPerfIntervalCount,
    rprSpanIntervalInMcastClassCOctets      HCPerfIntervalCount,

    rprSpanIntervalOutUcastClassAFrames     HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassAOctets     HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassBCirFrames  HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassBCirOctets  HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassBEirFrames  HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassBEirOctets  HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassCFrames     HCPerfIntervalCount,
    rprSpanIntervalOutUcastClassCOctets     HCPerfIntervalCount,

    rprSpanIntervalOutMcastClassAFrames     HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassAOctets     HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassBCirFrames  HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassBCirOctets  HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassBEirFrames  HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassBEirOctets  HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassCFrames     HCPerfIntervalCount,
    rprSpanIntervalOutMcastClassCOctets     HCPerfIntervalCount
    }

rprSpanIntervalIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprSpanCountersIntervalEntry 1 }

rprSpanIntervalSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this 
         row contains information."
    ::= { rprSpanCountersIntervalEntry 2 }

rprSpanIntervalNumber OBJECT-TYPE
    SYNTAX        Unsigned32 (1..96)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A number between 1 and 96, which identifies the intervals 
         for which the set of statistics is available. The interval
         identified by 1 is the most recently completed 15 minute
         interval, and interval identified by N is the interval 
         immediately preceding the one identified by N-1."
    ::= { rprSpanCountersIntervalEntry 3 }

rprSpanIntervalValidData OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This variable indicates if the data for this interval 
         is valid.
         It will be valid if it contains data for 900 seconds 
         plus or minus 10 seconds."
    ::= { rprSpanCountersIntervalEntry 4 }

rprSpanIntervalTimeElapsed OBJECT-TYPE
    SYNTAX        Unsigned32 (0..899)
    UNITS         "Seconds" 
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The duration of a particular interval in seconds.
       If, for some reason, such as an adjustment in the system's
       time-of-day clock, the current interval exceeds the maximum
       value, the agent will return the maximum value."
    ::= { rprSpanCountersIntervalEntry 5 }

rprSpanIntervalStartTime OBJECT-TYPE
    SYNTAX        DateAndTime
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "Indicates the wall clock time that this interval started."
    ::= { rprSpanCountersIntervalEntry 6 }

rprSpanIntervalInUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA unicast frames
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 7 }

rprSpanIntervalInUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 8 }

rprSpanIntervalInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR unicast frames
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 9 }

rprSpanIntervalInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 10 }

rprSpanIntervalInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR unicast
         frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 11 }

rprSpanIntervalInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR unicast
         octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 12 }

rprSpanIntervalInUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC unicast
         frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 13 }

rprSpanIntervalInUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC unicast
         octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 14 }

rprSpanIntervalInMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA multicast and 
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 15 }

rprSpanIntervalInMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classA multicast and 
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 16 }

rprSpanIntervalInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR multicast and
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 17 }

rprSpanIntervalInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB CIR multicast and
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 18 }

rprSpanIntervalInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR multicast and
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 19 }

rprSpanIntervalInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classB EIR multicast and
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 20 }

rprSpanIntervalInMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC multicast and 
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 21 }

rprSpanIntervalInMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) classC multicast and 
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 22 }

rprSpanIntervalOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA unicast frames
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 23 }

rprSpanIntervalOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 24 }

rprSpanIntervalOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR unicast frames,
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 25 }

rprSpanIntervalOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 26 }

rprSpanIntervalOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR unicast frames
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 27 }

rprSpanIntervalOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 28 }

rprSpanIntervalOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC unicast frames
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 29 }

rprSpanIntervalOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 30 }

rprSpanIntervalOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA multicast and 
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 31 }

rprSpanIntervalOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classA multicast and 
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 32 }

rprSpanIntervalOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR multicast and
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 33 }

rprSpanIntervalOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB CIR multicast and
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 34 }

rprSpanIntervalOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR multicast and
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 35 }

rprSpanIntervalOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classB EIR multicast and
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 36 }

rprSpanIntervalOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC multicast and
         broadcast frames in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 37 }

rprSpanIntervalOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) classC multicast and 
         broadcast octets in a particular interval in the past 24 hours."
    ::= { rprSpanCountersIntervalEntry 38 }

--
-- RPR ring interface day (24 hour summaries) counters
--

rprSpanCountersDayTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanCountersDayEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "The RPR Mac Span Day Table contains the cumulative sum
       of the various statistics for the 24 hour period
       preceding the current interval.

       All attributes in this table are volatile,
       i.e. will be cleared on system reset."
    ::= { rprSpanCounters 3 }

rprSpanCountersDayEntry OBJECT-TYPE
    SYNTAX        RprSpanCountersDayEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the RPR Span Day table."
    INDEX { rprSpanDayIfIndex,
            rprSpanDaySpan }
    ::= { rprSpanCountersDayTable 1 }

RprSpanCountersDayEntry ::= SEQUENCE {
    rprSpanDayIfIndex                 InterfaceIndex,
    rprSpanDaySpan                    RprSpan,

    rprSpanDayInUcastClassAFrames     HCPerfTotalCount,
    rprSpanDayInUcastClassAOctets     HCPerfTotalCount,
    rprSpanDayInUcastClassBCirFrames  HCPerfTotalCount,
    rprSpanDayInUcastClassBCirOctets  HCPerfTotalCount,
    rprSpanDayInUcastClassBEirFrames  HCPerfTotalCount,
    rprSpanDayInUcastClassBEirOctets  HCPerfTotalCount,
    rprSpanDayInUcastClassCFrames     HCPerfTotalCount,
    rprSpanDayInUcastClassCOctets     HCPerfTotalCount,

    rprSpanDayInMcastClassAFrames     HCPerfTotalCount,
    rprSpanDayInMcastClassAOctets     HCPerfTotalCount,
    rprSpanDayInMcastClassBCirFrames  HCPerfTotalCount,
    rprSpanDayInMcastClassBCirOctets  HCPerfTotalCount,
    rprSpanDayInMcastClassBEirFrames  HCPerfTotalCount,
    rprSpanDayInMcastClassBEirOctets  HCPerfTotalCount,
    rprSpanDayInMcastClassCFrames     HCPerfTotalCount,
    rprSpanDayInMcastClassCOctets     HCPerfTotalCount,

    rprSpanDayOutUcastClassAFrames    HCPerfTotalCount,
    rprSpanDayOutUcastClassAOctets    HCPerfTotalCount,
    rprSpanDayOutUcastClassBCirFrames HCPerfTotalCount,
    rprSpanDayOutUcastClassBCirOctets HCPerfTotalCount,
    rprSpanDayOutUcastClassBEirFrames HCPerfTotalCount,
    rprSpanDayOutUcastClassBEirOctets HCPerfTotalCount,
    rprSpanDayOutUcastClassCFrames    HCPerfTotalCount,
    rprSpanDayOutUcastClassCOctets    HCPerfTotalCount,

    rprSpanDayOutMcastClassAFrames    HCPerfTotalCount,
    rprSpanDayOutMcastClassAOctets    HCPerfTotalCount,
    rprSpanDayOutMcastClassBCirFrames HCPerfTotalCount,
    rprSpanDayOutMcastClassBCirOctets HCPerfTotalCount,
    rprSpanDayOutMcastClassBEirFrames HCPerfTotalCount,
    rprSpanDayOutMcastClassBEirOctets HCPerfTotalCount,
    rprSpanDayOutMcastClassCFrames    HCPerfTotalCount,
    rprSpanDayOutMcastClassCOctets    HCPerfTotalCount
    }

rprSpanDayIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprSpanCountersDayEntry 1 }

rprSpanDaySpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this 
         row contains information."
    ::= { rprSpanCountersDayEntry 2 }

rprSpanDayInUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA unicast frames."
    ::= { rprSpanCountersDayEntry 3 }

rprSpanDayInUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA unicast octets."
    ::= { rprSpanCountersDayEntry 4 }

rprSpanDayInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR unicast frames."
    ::= { rprSpanCountersDayEntry 5 }

rprSpanDayInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR unicast octets."
    ::= { rprSpanCountersDayEntry 6 }

rprSpanDayInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR unicast frames."
    ::= { rprSpanCountersDayEntry 7 }

rprSpanDayInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR unicast octets."
    ::= { rprSpanCountersDayEntry 8 }

rprSpanDayInUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC unicast frames."
    ::= { rprSpanCountersDayEntry 9 }

rprSpanDayInUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC unicast octets."
    ::= { rprSpanCountersDayEntry 10 }

rprSpanDayInMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA multicast 
       and broadcast frames"
    ::= { rprSpanCountersDayEntry 11 }

rprSpanDayInMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA multicast 
       and broadcast octets"
    ::= { rprSpanCountersDayEntry 12 }

rprSpanDayInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR multicast 
       and broadcast frames"
    ::= { rprSpanCountersDayEntry 13 }

rprSpanDayInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR multicast 
       and broadcast octets"
    ::= { rprSpanCountersDayEntry 14 }

rprSpanDayInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR multicast 
       and broadcast frames"
    ::= { rprSpanCountersDayEntry 15 }

rprSpanDayInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR multicast 
       and broadcast octets"
    ::= { rprSpanCountersDayEntry 16 }

rprSpanDayInMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC multicast 
       and broadcast frames"
    ::= { rprSpanCountersDayEntry 17 }

rprSpanDayInMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC multicast
       and broadcast octets"
    ::= { rprSpanCountersDayEntry 18 }

rprSpanDayOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA unicast frames."
    ::= { rprSpanCountersDayEntry 19 }

rprSpanDayOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA unicast octets."
    ::= { rprSpanCountersDayEntry 20 }

rprSpanDayOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR unicast frames."
    ::= { rprSpanCountersDayEntry 21 }

rprSpanDayOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR unicast octets."
    ::= { rprSpanCountersDayEntry 22 }

rprSpanDayOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR unicast 
       frames"
    ::= { rprSpanCountersDayEntry 23 }

rprSpanDayOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR unicast 
       octets"
    ::= { rprSpanCountersDayEntry 24 }

rprSpanDayOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC unicast frames"
    ::= { rprSpanCountersDayEntry 25 }

rprSpanDayOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC unicast octets"
    ::= { rprSpanCountersDayEntry 26 }

rprSpanDayOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA multicast and broadcast 
       frames."
    ::= { rprSpanCountersDayEntry 27 }

rprSpanDayOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA multicast and broadcast 
       octets."
    ::= { rprSpanCountersDayEntry 28 }

rprSpanDayOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR
       multicast and broadcast frames."
    ::= { rprSpanCountersDayEntry 29 }

rprSpanDayOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR
       multicast and broadcast octets."
    ::= { rprSpanCountersDayEntry 30 }

rprSpanDayOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR
       multicast and broadcast frames."
    ::= { rprSpanCountersDayEntry 31 }

rprSpanDayOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR
       multicast and broadcast octets."
    ::= { rprSpanCountersDayEntry 32 }

rprSpanDayOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC multicast and broadcast
       frames."
    ::= { rprSpanCountersDayEntry 33 }

rprSpanDayOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC multicast and broadcast
       octets."
    ::= { rprSpanCountersDayEntry 34 }

--
-- RPR ring interface continuously running counters
--

rprSpanCountersStatsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanCountersStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "The RPR Mac Span interface total counters table.

        The DiscontinuityTime for this table is indicated by 
        ifCounterDiscontinuityTime defined in ifXTable.

        All attributes in this table are volatile,
        i.e. will be cleared on system reset."
    ::= { rprSpanCounters 4 }

rprSpanCountersStatsEntry OBJECT-TYPE
    SYNTAX        RprSpanCountersStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "An entry in the span stats table."
    INDEX { rprSpanStatsIfIndex,
            rprSpanStatsSpan }
    ::= { rprSpanCountersStatsTable 1 }

RprSpanCountersStatsEntry ::= SEQUENCE {
    rprSpanStatsIfIndex                 InterfaceIndex,
    rprSpanStatsSpan                    RprSpan,

    rprSpanStatsInUcastClassAFrames     Counter64,
    rprSpanStatsInUcastClassAOctets     Counter64,
    rprSpanStatsInUcastClassBCirFrames  Counter64,
    rprSpanStatsInUcastClassBCirOctets  Counter64,
    rprSpanStatsInUcastClassBEirFrames  Counter64,
    rprSpanStatsInUcastClassBEirOctets  Counter64,
    rprSpanStatsInUcastClassCFrames     Counter64,
    rprSpanStatsInUcastClassCOctets     Counter64,

    rprSpanStatsInMcastClassAFrames     Counter64,
    rprSpanStatsInMcastClassAOctets     Counter64,
    rprSpanStatsInMcastClassBCirFrames  Counter64,
    rprSpanStatsInMcastClassBCirOctets  Counter64,
    rprSpanStatsInMcastClassBEirFrames  Counter64,
    rprSpanStatsInMcastClassBEirOctets  Counter64,
    rprSpanStatsInMcastClassCFrames     Counter64,
    rprSpanStatsInMcastClassCOctets     Counter64,

    rprSpanStatsInCtrlFrames            Counter64,
    rprSpanStatsInOamEchoFrames         Counter64,
    rprSpanStatsInOamFlushFrames        Counter64,
    rprSpanStatsInOamOrgFrames          Counter64,
    rprSpanStatsInTopoAtdFrames         Counter64,
    rprSpanStatsInTopoChkSumFrames      Counter64,
    rprSpanStatsInTopoTpFrames          Counter64,

    rprSpanStatsOutUcastClassAFrames    Counter64,
    rprSpanStatsOutUcastClassAOctets    Counter64,
    rprSpanStatsOutUcastClassBCirFrames Counter64,
    rprSpanStatsOutUcastClassBCirOctets Counter64,
    rprSpanStatsOutUcastClassBEirFrames Counter64,
    rprSpanStatsOutUcastClassBEirOctets Counter64,
    rprSpanStatsOutUcastClassCFrames    Counter64,
    rprSpanStatsOutUcastClassCOctets    Counter64,

    rprSpanStatsOutMcastClassAFrames    Counter64,
    rprSpanStatsOutMcastClassAOctets    Counter64,
    rprSpanStatsOutMcastClassBCirFrames Counter64,
    rprSpanStatsOutMcastClassBCirOctets Counter64,
    rprSpanStatsOutMcastClassBEirFrames Counter64,
    rprSpanStatsOutMcastClassBEirOctets Counter64,
    rprSpanStatsOutMcastClassCFrames    Counter64,
    rprSpanStatsOutMcastClassCOctets    Counter64,

    rprSpanStatsOutCtrlFrames           Counter64,
    rprSpanStatsOutOamEchoFrames        Counter64,
    rprSpanStatsOutOamFlushFrames       Counter64,
    rprSpanStatsOutOamOrgFrames         Counter64,
    rprSpanStatsOutTopoAtdFrames        Counter64,
    rprSpanStatsOutTopoChkSumFrames     Counter64,
    rprSpanStatsOutTopoTpFrames         Counter64
    }

rprSpanStatsIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprSpanCountersStatsEntry 1 }

rprSpanStatsSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this 
         row contains information."
REFERENCE
        "IEEE 802.17 Subclause 7.2.2, myRi"
    ::= { rprSpanCountersStatsEntry 2 }

rprSpanStatsInUcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassAFrames"
    ::= { rprSpanCountersStatsEntry 3 }

rprSpanStatsInUcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassABytes"
    ::= { rprSpanCountersStatsEntry 4 }

rprSpanStatsInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassBCirFrames"
    ::= { rprSpanCountersStatsEntry 5 }

rprSpanStatsInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassBCirBytes"
    ::= { rprSpanCountersStatsEntry 6 }

rprSpanStatsInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassBEirFrames"
    ::= { rprSpanCountersStatsEntry 7 }

rprSpanStatsInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassBEirBytes"
    ::= { rprSpanCountersStatsEntry 8 }

rprSpanStatsInUcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassCFrames"
    ::= { rprSpanCountersStatsEntry 9 }

rprSpanStatsInUcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxUcastClassCBytes"
    ::= { rprSpanCountersStatsEntry 10 }

rprSpanStatsInMcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA multicast and 
       broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassAFrames"
    ::= { rprSpanCountersStatsEntry 11 }

rprSpanStatsInMcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classA multicast and 
       broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassABytes"
    ::= { rprSpanCountersStatsEntry 12 }

rprSpanStatsInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR multicast 
       and broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassBCirFrames"
    ::= { rprSpanCountersStatsEntry 13 }

rprSpanStatsInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB CIR multicast 
       and broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassBCirBytes"
    ::= { rprSpanCountersStatsEntry 14 }

rprSpanStatsInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR multicast 
       and broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassBEirFrames"
    ::= { rprSpanCountersStatsEntry 15 }

rprSpanStatsInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classB EIR multicast 
       and broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassBEirBytes"
    ::= { rprSpanCountersStatsEntry 16 }

rprSpanStatsInMcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC multicast and 
       broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassCFrames"
    ::= { rprSpanCountersStatsEntry 17 }

rprSpanStatsInMcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) classC multicast and 
       broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, rxMcastClassCBytes"
    ::= { rprSpanCountersStatsEntry 18 }

rprSpanStatsInCtrlFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) control frames
         processed by this MAC.
         This does not include control frames in transit,
         i.e. a multicast control frame received from a ringlet
         will be counted as In but not Out.
         This does not include Fairness or idle frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlFrames"
    ::= { rprSpanCountersStatsEntry 19 }

rprSpanStatsInOamEchoFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) OAM echo 
         frames processed by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlOamEchoFrames"
    ::= { rprSpanCountersStatsEntry 20 }

rprSpanStatsInOamFlushFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) OAM flush 
         frames processed by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlOamFlushFrames"
    ::= { rprSpanCountersStatsEntry 21 }

rprSpanStatsInOamOrgFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) OAM Org 
         frames processed by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlOamOrgFrames"
    ::= { rprSpanCountersStatsEntry 22 }

rprSpanStatsInTopoAtdFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) Topology ATD 
         frames processed by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlTopoATDFrames"
    ::= { rprSpanCountersStatsEntry 23 }

rprSpanStatsInTopoChkSumFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) topology 
         checksum frames processed by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlTopoSumFrames"
    ::= { rprSpanCountersStatsEntry 24 }

rprSpanStatsInTopoTpFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) topology TP 
         frames processed by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toCtrlTopoTPFrames"
    ::= { rprSpanCountersStatsEntry 25 }

rprSpanStatsOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassAFrames"
    ::= { rprSpanCountersStatsEntry 26 }

rprSpanStatsOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassABytes"
    ::= { rprSpanCountersStatsEntry 27 }

rprSpanStatsOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassBCirFrames"
    ::= { rprSpanCountersStatsEntry 28 }

rprSpanStatsOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassBCirBytes"
    ::= { rprSpanCountersStatsEntry 29 }

rprSpanStatsOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR unicast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassBEirFrames"
    ::= { rprSpanCountersStatsEntry 30 }

rprSpanStatsOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR unicast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassBEirBytes"
    ::= { rprSpanCountersStatsEntry 31 }

rprSpanStatsOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC unicast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassCFrames"
    ::= { rprSpanCountersStatsEntry 32 }

rprSpanStatsOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC unicast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txUcastClassCBytes"
    ::= { rprSpanCountersStatsEntry 33 }

rprSpanStatsOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA multicast and 
       broadcast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassAFrames"
    ::= { rprSpanCountersStatsEntry 34 }

rprSpanStatsOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classA multicast and 
       broadcast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassABytes"
    ::= { rprSpanCountersStatsEntry 35 }

rprSpanStatsOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR
       multicast and broadcast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassBCirFrames"
    ::= { rprSpanCountersStatsEntry 36 }

rprSpanStatsOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB CIR
       multicast and broadcast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassBCirBytes"
    ::= { rprSpanCountersStatsEntry 37 }

rprSpanStatsOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR
       multicast and broadcast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassBEirFrames"
    ::= { rprSpanCountersStatsEntry 38 }

rprSpanStatsOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classB EIR
       multicast and broadcast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassBEirBytes"
    ::= { rprSpanCountersStatsEntry 39 }

rprSpanStatsOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC multicast and 
       broadcast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassCFrames"
    ::= { rprSpanCountersStatsEntry 40 }

rprSpanStatsOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of transmitted (MAC to PHY) classC multicast and 
       broadcast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, txMcastClassCBytes"
    ::= { rprSpanCountersStatsEntry 41 }

rprSpanStatsOutCtrlFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) control frames
         generated by this MAC.
         This does not include control frames in transit, 
         i.e. a multicast control frame received from a ringlet
         will be counted as In but not Out. 
         This does not include Fairness or idle frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlFrames"
    ::= { rprSpanCountersStatsEntry 42 }

rprSpanStatsOutOamEchoFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) OAM echo
         frames generated by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlOamEchoFrames"
    ::= { rprSpanCountersStatsEntry 43 }

rprSpanStatsOutOamFlushFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) OAM flush
         frames generated by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlOamFlushFrames"
    ::= { rprSpanCountersStatsEntry 44 }

rprSpanStatsOutOamOrgFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) OAM Org
         frames generated by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlOamOrgFrames"
    ::= { rprSpanCountersStatsEntry 45 }

rprSpanStatsOutTopoAtdFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) topology
         ATD frames generated by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlTopoATDFrames"
    ::= { rprSpanCountersStatsEntry 46 }

rprSpanStatsOutTopoChkSumFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) topology
         checksum frames generated by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlTopoSumFrames"
    ::= { rprSpanCountersStatsEntry 47 }

rprSpanStatsOutTopoTpFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of transmitted (MAC to PHY) topology
         TP frames generated by this MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromCtrlTopoTPFrames"
    ::= { rprSpanCountersStatsEntry 48 }


--
-- RPR Client interface current counters table
--

rprClientCountersCurrentTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprClientCountersCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The local station traffic current counters table.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprClientCounters 1 }

rprClientCountersCurrentEntry OBJECT-TYPE
    SYNTAX        RprClientCountersCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
       "Frames and octets statistics for the current interval for
        the local station traffic of a particular RPR client interface.
        The corresponding instance of rprIfTimeElapsed indicates
        the number of seconds which have elapsed so far in the
        current interval."
    INDEX { rprClientCurrentIfIndex }
    ::= { rprClientCountersCurrentTable 1 }

RprClientCountersCurrentEntry ::= SEQUENCE {
    rprClientCurrentIfIndex                 InterfaceIndex,

    rprClientCurrentInUcastClassAFrames     HCPerfCurrentCount,
    rprClientCurrentInUcastClassAOctets     HCPerfCurrentCount,
    rprClientCurrentInUcastClassBCirFrames  HCPerfCurrentCount,
    rprClientCurrentInUcastClassBCirOctets  HCPerfCurrentCount,
    rprClientCurrentInUcastClassBEirFrames  HCPerfCurrentCount,
    rprClientCurrentInUcastClassBEirOctets  HCPerfCurrentCount,
    rprClientCurrentInUcastClassCFrames     HCPerfCurrentCount,
    rprClientCurrentInUcastClassCOctets     HCPerfCurrentCount,

    rprClientCurrentInMcastClassAFrames     HCPerfCurrentCount,
    rprClientCurrentInMcastClassAOctets     HCPerfCurrentCount,
    rprClientCurrentInMcastClassBCirFrames  HCPerfCurrentCount,
    rprClientCurrentInMcastClassBCirOctets  HCPerfCurrentCount,
    rprClientCurrentInMcastClassBEirFrames  HCPerfCurrentCount,
    rprClientCurrentInMcastClassBEirOctets  HCPerfCurrentCount,
    rprClientCurrentInMcastClassCFrames     HCPerfCurrentCount,
    rprClientCurrentInMcastClassCOctets     HCPerfCurrentCount,

    rprClientCurrentOutUcastClassAFrames    HCPerfCurrentCount,
    rprClientCurrentOutUcastClassAOctets    HCPerfCurrentCount,
    rprClientCurrentOutUcastClassBCirFrames HCPerfCurrentCount,
    rprClientCurrentOutUcastClassBCirOctets HCPerfCurrentCount,
    rprClientCurrentOutUcastClassBEirFrames HCPerfCurrentCount,
    rprClientCurrentOutUcastClassBEirOctets HCPerfCurrentCount,
    rprClientCurrentOutUcastClassCFrames    HCPerfCurrentCount,
    rprClientCurrentOutUcastClassCOctets    HCPerfCurrentCount,

    rprClientCurrentOutMcastClassAFrames    HCPerfCurrentCount,
    rprClientCurrentOutMcastClassAOctets    HCPerfCurrentCount,
    rprClientCurrentOutMcastClassBCirFrames HCPerfCurrentCount,
    rprClientCurrentOutMcastClassBCirOctets HCPerfCurrentCount,
    rprClientCurrentOutMcastClassBEirFrames HCPerfCurrentCount,
    rprClientCurrentOutMcastClassBEirOctets HCPerfCurrentCount,
    rprClientCurrentOutMcastClassCFrames    HCPerfCurrentCount,
    rprClientCurrentOutMcastClassCOctets    HCPerfCurrentCount
    }

rprClientCurrentIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprClientCountersCurrentEntry 1 }

rprClientCurrentInUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA unicast frames in 
         the current interval."
    ::= { rprClientCountersCurrentEntry 2 }

rprClientCurrentInUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA unicast octets in 
         the current interval."
    ::= { rprClientCountersCurrentEntry 3 }

rprClientCurrentInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR unicast frames in
         the current interval."
    ::= { rprClientCountersCurrentEntry 4 }

rprClientCurrentInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR unicast octets
         in the current interval."
    ::= { rprClientCountersCurrentEntry 5 }

rprClientCurrentInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR unicast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 6 }

rprClientCurrentInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR unicast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 7 }

rprClientCurrentInUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC unicast frames in the
         current interval."
    ::= { rprClientCountersCurrentEntry 8 }

rprClientCurrentInUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC unicast octets in the
         current interval."
    ::= { rprClientCountersCurrentEntry 9 }

rprClientCurrentInMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA multicast and broadcast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 10 }

rprClientCurrentInMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA multicast and broadcast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 11 }

rprClientCurrentInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR
         multicast and broadcast frames in the current interval."
    ::= { rprClientCountersCurrentEntry 12 }

rprClientCurrentInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR
         multicast and broadcast octets in the current interval."
    ::= { rprClientCountersCurrentEntry 13 }

rprClientCurrentInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR
         multicast and broadcast frames in the current interval."
    ::= { rprClientCountersCurrentEntry 14 }

rprClientCurrentInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR
         multicast and broadcast octets in the current interval."
    ::= { rprClientCountersCurrentEntry 15 }

rprClientCurrentInMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC multicast and broadcast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 16 }

rprClientCurrentInMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC multicast and broadcast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 17 }

rprClientCurrentOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA unicast frames 
         in the current interval."
    ::= { rprClientCountersCurrentEntry 18 }

rprClientCurrentOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA unicast octets
         in the current interval."
    ::= { rprClientCountersCurrentEntry 19 }

rprClientCurrentOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR unicast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 20 }

rprClientCurrentOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR unicast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 21 }

rprClientCurrentOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR unicast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 22 }

rprClientCurrentOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR unicast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 23 }

rprClientCurrentOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC unicast frames 
         in the current interval."
    ::= { rprClientCountersCurrentEntry 24 }

rprClientCurrentOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC unicast octets
         in the current interval."
    ::= { rprClientCountersCurrentEntry 25 }

rprClientCurrentOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA multicast and broadcast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 26 }

rprClientCurrentOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA multicast and broadcast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 27 }

rprClientCurrentOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR
         multicast and broadcast frames in the current interval."
    ::= { rprClientCountersCurrentEntry 28 }

rprClientCurrentOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR
         multicast and broadcast octets in the current interval."
    ::= { rprClientCountersCurrentEntry 29 }

rprClientCurrentOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR
         multicast and broadcast frames in the current interval."
    ::= { rprClientCountersCurrentEntry 30 }

rprClientCurrentOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR
         multicast and broadcast octets in the current interval."
    ::= { rprClientCountersCurrentEntry 31 }

rprClientCurrentOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC multicast and broadcast
         frames in the current interval."
    ::= { rprClientCountersCurrentEntry 32 }

rprClientCurrentOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC multicast and broadcast
         octets in the current interval."
    ::= { rprClientCountersCurrentEntry 33 }


--
-- RPR client interface interval counters table
--

rprClientCountersIntervalTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprClientCountersIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The local station traffic interval counters table.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprClientCounters 2 }

rprClientCountersIntervalEntry OBJECT-TYPE
    SYNTAX        RprClientCountersIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "Frames and octets statistics collected for a particular
       interval for local station traffic of a particular RPR 
       interface.
       The corresponding instance of rprIfValidIntervals indicates
       the number of intervals for which the set of statistics is
       available."
    INDEX { rprClientIntervalIfIndex,
            rprClientIntervalNumber }
    ::= { rprClientCountersIntervalTable 1 }

RprClientCountersIntervalEntry ::= SEQUENCE {
    rprClientIntervalIfIndex                 InterfaceIndex,
    rprClientIntervalNumber                  Unsigned32,
    rprClientIntervalValidData               TruthValue,
    rprClientIntervalTimeElapsed             Unsigned32,

    rprClientIntervalInUcastClassAFrames     HCPerfIntervalCount,
    rprClientIntervalInUcastClassAOctets     HCPerfIntervalCount,
    rprClientIntervalInUcastClassBCirFrames  HCPerfIntervalCount,
    rprClientIntervalInUcastClassBCirOctets  HCPerfIntervalCount,
    rprClientIntervalInUcastClassBEirFrames  HCPerfIntervalCount,
    rprClientIntervalInUcastClassBEirOctets  HCPerfIntervalCount,
    rprClientIntervalInUcastClassCFrames     HCPerfIntervalCount,
    rprClientIntervalInUcastClassCOctets     HCPerfIntervalCount,

    rprClientIntervalInMcastClassAFrames     HCPerfIntervalCount,
    rprClientIntervalInMcastClassAOctets     HCPerfIntervalCount,
    rprClientIntervalInMcastClassBCirFrames  HCPerfIntervalCount,
    rprClientIntervalInMcastClassBCirOctets  HCPerfIntervalCount,
    rprClientIntervalInMcastClassBEirFrames  HCPerfIntervalCount,
    rprClientIntervalInMcastClassBEirOctets  HCPerfIntervalCount,
    rprClientIntervalInMcastClassCFrames     HCPerfIntervalCount,
    rprClientIntervalInMcastClassCOctets     HCPerfIntervalCount,

    rprClientIntervalOutUcastClassAFrames    HCPerfIntervalCount,
    rprClientIntervalOutUcastClassAOctets    HCPerfIntervalCount,
    rprClientIntervalOutUcastClassBCirFrames HCPerfIntervalCount,
    rprClientIntervalOutUcastClassBCirOctets HCPerfIntervalCount,
    rprClientIntervalOutUcastClassBEirFrames HCPerfIntervalCount,
    rprClientIntervalOutUcastClassBEirOctets HCPerfIntervalCount,
    rprClientIntervalOutUcastClassCFrames    HCPerfIntervalCount,
    rprClientIntervalOutUcastClassCOctets    HCPerfIntervalCount,

    rprClientIntervalOutMcastClassAFrames    HCPerfIntervalCount,
    rprClientIntervalOutMcastClassAOctets    HCPerfIntervalCount,
    rprClientIntervalOutMcastClassBCirFrames HCPerfIntervalCount,
    rprClientIntervalOutMcastClassBCirOctets HCPerfIntervalCount,
    rprClientIntervalOutMcastClassBEirFrames HCPerfIntervalCount,
    rprClientIntervalOutMcastClassBEirOctets HCPerfIntervalCount,
    rprClientIntervalOutMcastClassCFrames    HCPerfIntervalCount,
    rprClientIntervalOutMcastClassCOctets    HCPerfIntervalCount
    }

rprClientIntervalIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprClientCountersIntervalEntry 1 }

rprClientIntervalNumber OBJECT-TYPE
    SYNTAX        Unsigned32 (1..96)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A number between 1 and 96, which identifies the interval
         for which the set of statistics is available. The interval
         identified by 1 is the most recently completed 15 minute
         interval, and interval identified by N is the interval
         immediately preceding the one identified by N-1."
    ::= { rprClientCountersIntervalEntry 2 }

rprClientIntervalValidData OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This variable indicates if the data for this interval 
         is valid.
         It will be valid if it contains data for 900 seconds 
         plus or minus 10 seconds."
    ::= { rprClientCountersIntervalEntry 3 }

rprClientIntervalTimeElapsed OBJECT-TYPE
    SYNTAX        Unsigned32 (0..899)
    UNITS         "Seconds"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The duration of a particular interval in seconds.
       If, for some reason, such as an adjustment in the system's
       time-of-day clock, the current interval exceeds the maximum
       value, the agent will return the maximum value."
    ::= { rprClientCountersIntervalEntry 4 }

rprClientIntervalInUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA unicast frames 
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 5 }

rprClientIntervalInUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 6 }

rprClientIntervalInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR unicast frames 
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 7 }

rprClientIntervalInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 8 }

rprClientIntervalInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR unicast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 9 }

rprClientIntervalInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR unicast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 10 }

rprClientIntervalInUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC unicast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 11 }

rprClientIntervalInUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC unicast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 12 }

rprClientIntervalInMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA multicast and broadcast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 13 }

rprClientIntervalInMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classA multicast and broadcast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 14 }

rprClientIntervalInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR multicast and
         broadcast frames in a particular interval in the past
         24 hours."
    ::= { rprClientCountersIntervalEntry 15 }

rprClientIntervalInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB CIR multicast and
         broadcast octets in a particular interval in the past
         24 hours."
    ::= { rprClientCountersIntervalEntry 16 }

rprClientIntervalInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR multicast and
         broadcast frames in a particular interval in the past
         24 hours."
    ::= { rprClientCountersIntervalEntry 17 }

rprClientIntervalInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classB EIR multicast and
         broadcast octets in a particular interval in the past
         24 hours."
    ::= { rprClientCountersIntervalEntry 18 }

rprClientIntervalInMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC multicast and broadcast 
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 19 }

rprClientIntervalInMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of MAC to client classC multicast and broadcast 
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 20 }

rprClientIntervalOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA unicast frames 
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 21 }

rprClientIntervalOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 22 }

rprClientIntervalOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR unicast frames
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 23 }

rprClientIntervalOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR unicast octets
         in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 24 }

rprClientIntervalOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR unicast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 25 }

rprClientIntervalOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR unicast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 26 }

rprClientIntervalOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC unicast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 27 }

rprClientIntervalOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC unicast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 28 }

rprClientIntervalOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA multicast and broadcast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 29 }

rprClientIntervalOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classA multicast and broadcast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 30 }

rprClientIntervalOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR multicast
         and broadcast frames in a particular interval in the
         past 24 hours."
    ::= { rprClientCountersIntervalEntry 31 }

rprClientIntervalOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB CIR multicast
         and broadcast octets in a particular interval in the
         past 24 hours."
    ::= { rprClientCountersIntervalEntry 32 }

rprClientIntervalOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR multicast
         and broadcast frames in a particular interval in the
         past 24 hours."
    ::= { rprClientCountersIntervalEntry 33 }

rprClientIntervalOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classB EIR multicast
         and broadcast octets in a particular interval in the
         past 24 hours."
    ::= { rprClientCountersIntervalEntry 34 }

rprClientIntervalOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC multicast and broadcast
         frames in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 35 }

rprClientIntervalOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of client to MAC classC multicast and broadcast
         octets in a particular interval in the past 24 hours."
    ::= { rprClientCountersIntervalEntry 36 }

--
-- RPR client interface day (24 hour summaries) counters table
--

rprClientCountersDayTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprClientCountersDayEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "The RPR Mac Client Day Table contains the cumulative sum
       of the various statistics for the 24 hour period
       preceding the current interval.

       All attributes in this table are volatile,
       i.e. will be cleared on system reset."
    ::= { rprClientCounters 3 }

rprClientCountersDayEntry OBJECT-TYPE
    SYNTAX        RprClientCountersDayEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the RPR Client Day table."
    INDEX { rprClientDayIfIndex }
    ::= { rprClientCountersDayTable 1 }

RprClientCountersDayEntry ::= SEQUENCE {
    rprClientDayIfIndex                  InterfaceIndex,

    rprClientDayInUcastClassAFrames      HCPerfTotalCount,
    rprClientDayInUcastClassAOctets      HCPerfTotalCount,
    rprClientDayInUcastClassBCirFrames   HCPerfTotalCount,
    rprClientDayInUcastClassBCirOctets   HCPerfTotalCount,
    rprClientDayInUcastClassBEirFrames   HCPerfTotalCount,
    rprClientDayInUcastClassBEirOctets   HCPerfTotalCount,
    rprClientDayInUcastClassCFrames      HCPerfTotalCount,
    rprClientDayInUcastClassCOctets      HCPerfTotalCount,

    rprClientDayInMcastClassAFrames      HCPerfTotalCount,
    rprClientDayInMcastClassAOctets      HCPerfTotalCount,
    rprClientDayInMcastClassBCirFrames   HCPerfTotalCount,
    rprClientDayInMcastClassBCirOctets   HCPerfTotalCount,
    rprClientDayInMcastClassBEirFrames   HCPerfTotalCount,
    rprClientDayInMcastClassBEirOctets   HCPerfTotalCount,
    rprClientDayInMcastClassCFrames      HCPerfTotalCount,
    rprClientDayInMcastClassCOctets      HCPerfTotalCount,

    rprClientDayOutUcastClassAFrames     HCPerfTotalCount,
    rprClientDayOutUcastClassAOctets     HCPerfTotalCount,
    rprClientDayOutUcastClassBCirFrames  HCPerfTotalCount,
    rprClientDayOutUcastClassBCirOctets  HCPerfTotalCount,
    rprClientDayOutUcastClassBEirFrames  HCPerfTotalCount,
    rprClientDayOutUcastClassBEirOctets  HCPerfTotalCount,
    rprClientDayOutUcastClassCFrames     HCPerfTotalCount,
    rprClientDayOutUcastClassCOctets     HCPerfTotalCount,

    rprClientDayOutMcastClassAFrames     HCPerfTotalCount,
    rprClientDayOutMcastClassAOctets     HCPerfTotalCount,
    rprClientDayOutMcastClassBCirFrames  HCPerfTotalCount,
    rprClientDayOutMcastClassBCirOctets  HCPerfTotalCount,
    rprClientDayOutMcastClassBEirFrames  HCPerfTotalCount,
    rprClientDayOutMcastClassBEirOctets  HCPerfTotalCount,
    rprClientDayOutMcastClassCFrames     HCPerfTotalCount,
    rprClientDayOutMcastClassCOctets     HCPerfTotalCount
    }

rprClientDayIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprClientCountersDayEntry 1 }

rprClientDayInUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA unicast frames."
    ::= { rprClientCountersDayEntry 2 }

rprClientDayInUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA unicast octets."
    ::= { rprClientCountersDayEntry 3 }

rprClientDayInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR unicast frames."
    ::= { rprClientCountersDayEntry 4 }

rprClientDayInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR unicast octets."
    ::= { rprClientCountersDayEntry 5 }

rprClientDayInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR unicast frames."
    ::= { rprClientCountersDayEntry 6 }

rprClientDayInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR unicast octets."
    ::= { rprClientCountersDayEntry 7 }

rprClientDayInUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC unicast frames."
    ::= { rprClientCountersDayEntry 8 }

rprClientDayInUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC unicast octets."
    ::= { rprClientCountersDayEntry 9 }

rprClientDayInMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA multicast and broadcast frames"
    ::= { rprClientCountersDayEntry 10 }

rprClientDayInMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA multicast and broadcast octets"
    ::= { rprClientCountersDayEntry 11 }

rprClientDayInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR multicast 
       and broadcast frames"
    ::= { rprClientCountersDayEntry 12 }

rprClientDayInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR multicast 
       and broadcast octets"
    ::= { rprClientCountersDayEntry 13 }

rprClientDayInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR multicast 
       and broadcast frames"
    ::= { rprClientCountersDayEntry 14 }

rprClientDayInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR multicast 
       and broadcast octets"
    ::= { rprClientCountersDayEntry 15 }

rprClientDayInMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC multicast and broadcast frames"
    ::= { rprClientCountersDayEntry 16 }

rprClientDayInMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC multicast and broadcast octets"
    ::= { rprClientCountersDayEntry 17 }

rprClientDayOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA unicast frames."
    ::= { rprClientCountersDayEntry 18 }

rprClientDayOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA unicast octets."
    ::= { rprClientCountersDayEntry 19 }

rprClientDayOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR unicast frames."
    ::= { rprClientCountersDayEntry 20 }

rprClientDayOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR unicast octets."
    ::= { rprClientCountersDayEntry 21 }

rprClientDayOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR unicast 
       frames"
    ::= { rprClientCountersDayEntry 22 }

rprClientDayOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR unicast 
       octets"
    ::= { rprClientCountersDayEntry 23 }

rprClientDayOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC unicast frames"
    ::= { rprClientCountersDayEntry 24 }

rprClientDayOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC unicast octets"
    ::= { rprClientCountersDayEntry 25 }

rprClientDayOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA multicast and broadcast 
       frames."
    ::= { rprClientCountersDayEntry 26 }

rprClientDayOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA multicast and broadcast 
       octets."
    ::= { rprClientCountersDayEntry 27 }

rprClientDayOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR
       multicast and broadcast frames."
    ::= { rprClientCountersDayEntry 28 }

rprClientDayOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR
       multicast and broadcast octets."
    ::= { rprClientCountersDayEntry 29 }

rprClientDayOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR
       multicast and broadcast frames."
    ::= { rprClientCountersDayEntry 30 }

rprClientDayOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR
       multicast and broadcast octets."
    ::= { rprClientCountersDayEntry 31 }

rprClientDayOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC multicast and broadcast
       frames."
    ::= { rprClientCountersDayEntry 32 }

rprClientDayOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC multicast and broadcast
       octets."
    ::= { rprClientCountersDayEntry 33 }

--
-- RPR client interface continuously running counters table
--

rprClientCountersStatsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprClientCountersStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The local station traffic total counters table.

         The DiscontinuityTime for this table is indicated by 
         ifCounterDiscontinuityTime defined in ifXTable.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprClientCounters 4 }

rprClientCountersStatsEntry OBJECT-TYPE
    SYNTAX        RprClientCountersStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "An entry in the span stats table."
    INDEX { rprClientStatsIfIndex }
    ::= { rprClientCountersStatsTable 1 }

RprClientCountersStatsEntry ::= SEQUENCE {
    rprClientStatsIfIndex                  InterfaceIndex,

    rprClientStatsInUcastClassAFrames      Counter64,
    rprClientStatsInUcastClassAOctets      Counter64,
    rprClientStatsInUcastClassBCirFrames   Counter64,
    rprClientStatsInUcastClassBCirOctets   Counter64,
    rprClientStatsInUcastClassBEirFrames   Counter64,
    rprClientStatsInUcastClassBEirOctets   Counter64,
    rprClientStatsInUcastClassCFrames      Counter64,
    rprClientStatsInUcastClassCOctets      Counter64,

    rprClientStatsInMcastClassAFrames      Counter64,
    rprClientStatsInMcastClassAOctets      Counter64,
    rprClientStatsInMcastClassBCirFrames   Counter64,
    rprClientStatsInMcastClassBCirOctets   Counter64,
    rprClientStatsInMcastClassBEirFrames   Counter64,
    rprClientStatsInMcastClassBEirOctets   Counter64,
    rprClientStatsInMcastClassCFrames      Counter64,
    rprClientStatsInMcastClassCOctets      Counter64,

    rprClientStatsInBcastFrames            Counter64,

    rprClientStatsOutUcastClassAFrames     Counter64,
    rprClientStatsOutUcastClassAOctets     Counter64,
    rprClientStatsOutUcastClassBCirFrames  Counter64,
    rprClientStatsOutUcastClassBCirOctets  Counter64,
    rprClientStatsOutUcastClassBEirFrames  Counter64,
    rprClientStatsOutUcastClassBEirOctets  Counter64,
    rprClientStatsOutUcastClassCFrames     Counter64,
    rprClientStatsOutUcastClassCOctets     Counter64,

    rprClientStatsOutMcastClassAFrames     Counter64,
    rprClientStatsOutMcastClassAOctets     Counter64,
    rprClientStatsOutMcastClassBCirFrames  Counter64,
    rprClientStatsOutMcastClassBCirOctets  Counter64,
    rprClientStatsOutMcastClassBEirFrames  Counter64,
    rprClientStatsOutMcastClassBEirOctets  Counter64,
    rprClientStatsOutMcastClassCFrames     Counter64,
    rprClientStatsOutMcastClassCOctets     Counter64,

    rprClientStatsOutBcastFrames           Counter64
    }

rprClientStatsIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprClientCountersStatsEntry 1 }

rprClientStatsInUcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassAFrames"
    ::= { rprClientCountersStatsEntry 2 }

rprClientStatsInUcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassABytes"
    ::= { rprClientCountersStatsEntry 3 }

rprClientStatsInUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassBCirAFrames"
    ::= { rprClientCountersStatsEntry 4 }

rprClientStatsInUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassBCirBytes"
    ::= { rprClientCountersStatsEntry 5 }

rprClientStatsInUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassBEirFrames"
    ::= { rprClientCountersStatsEntry 6 }

rprClientStatsInUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassBEirBytes"
    ::= { rprClientCountersStatsEntry 7 }

rprClientStatsInUcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassCFrames"
    ::= { rprClientCountersStatsEntry 8 }

rprClientStatsInUcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientUcastClassCBytes"
    ::= { rprClientCountersStatsEntry 9 }

rprClientStatsInMcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA multicast and broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassAFrames"
    ::= { rprClientCountersStatsEntry 10 }

rprClientStatsInMcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classA multicast and broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassABytes"
    ::= { rprClientCountersStatsEntry 11 }

rprClientStatsInMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR multicast 
       and broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassBCirFrames"
    ::= { rprClientCountersStatsEntry 12 }

rprClientStatsInMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB CIR multicast 
       and broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassBCirBytes"
    ::= { rprClientCountersStatsEntry 13 }

rprClientStatsInMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR multicast 
       and broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassBEirFrames"
    ::= { rprClientCountersStatsEntry 14 }

rprClientStatsInMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classB EIR multicast 
       and broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassBEirBytes"
    ::= { rprClientCountersStatsEntry 15 }

rprClientStatsInMcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC multicast and broadcast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassCFrames"
    ::= { rprClientCountersStatsEntry 16 }

rprClientStatsInMcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client classC multicast and broadcast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientMcastClassCBytes"
    ::= { rprClientCountersStatsEntry 17 }

rprClientStatsInBcastFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of MAC to client broadcast frames.
       This is used only when deriving the multicast
       and broadcast packet counters for the interface MIB."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, toClientBcastFrames"
    ::= { rprClientCountersStatsEntry 18 }

rprClientStatsOutUcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassAFrames"
    ::= { rprClientCountersStatsEntry 19 }

rprClientStatsOutUcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassABytes"
    ::= { rprClientCountersStatsEntry 20 }

rprClientStatsOutUcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR unicast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBCirFrames"
    ::= { rprClientCountersStatsEntry 21 }

rprClientStatsOutUcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR unicast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBCirBytes"
    ::= { rprClientCountersStatsEntry 22 }

rprClientStatsOutUcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR unicast 
       frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBEirFrames"
    ::= { rprClientCountersStatsEntry 23 }

rprClientStatsOutUcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR unicast 
       octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBEirBytes"
    ::= { rprClientCountersStatsEntry 24 }

rprClientStatsOutUcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC unicast frames"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassCFrames"
    ::= { rprClientCountersStatsEntry 25 }

rprClientStatsOutUcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC unicast octets"
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientUcastClassCBytes"
    ::= { rprClientCountersStatsEntry 26 }

rprClientStatsOutMcastClassAFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA multicast and broadcast 
       frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassAFrames"
    ::= { rprClientCountersStatsEntry 27 }

rprClientStatsOutMcastClassAOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classA multicast and broadcast 
       octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassABytes"
    ::= { rprClientCountersStatsEntry 28 }

rprClientStatsOutMcastClassBCirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR
       multicast and broadcast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBCirFrames"
    ::= { rprClientCountersStatsEntry 29 }

rprClientStatsOutMcastClassBCirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB CIR
       multicast and broadcast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBCirBytes"
    ::= { rprClientCountersStatsEntry 30 }

rprClientStatsOutMcastClassBEirFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR
       multicast and broadcast frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBEirFrames"
    ::= { rprClientCountersStatsEntry 31 }

rprClientStatsOutMcastClassBEirOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classB EIR
       multicast and broadcast octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBEirBytes"
    ::= { rprClientCountersStatsEntry 32 }

rprClientStatsOutMcastClassCFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC multicast and broadcast
       frames."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassCFrames"
    ::= { rprClientCountersStatsEntry 33 }

rprClientStatsOutMcastClassCOctets OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC classC multicast and broadcast
       octets."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientMcastClassCBytes"
    ::= { rprClientCountersStatsEntry 34 }

rprClientStatsOutBcastFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of client to MAC broadcast frames.
       This is used only when deriving the multicast
       and broadcast packet counters for the interface MIB."
    REFERENCE
        "IEEE 802.17 Subclause 7.2.5, fromClientBcastFrames"
    ::= { rprClientCountersStatsEntry 35 }

--
-- RPR error current counters
--

rprSpanErrorCountersCurrentTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanErrorCountersCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR Errors Current counters table.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprSpanErrorCounters 1 }

rprSpanErrorCountersCurrentEntry OBJECT-TYPE
    SYNTAX        RprSpanErrorCountersCurrentEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Errors statistics for the current interval of a particular
         span of a particular RPR interface.
         The corresponding instance of rprIfTimeElapsed indicates
         the number of seconds which have elapsed so far in the
         current interval."
    INDEX { rprSpanErrorCurrentIfIndex,
            rprSpanErrorCurrentSpan }
    ::= { rprSpanErrorCountersCurrentTable 1 }

RprSpanErrorCountersCurrentEntry ::= SEQUENCE {
    rprSpanErrorCurrentIfIndex                InterfaceIndex,
    rprSpanErrorCurrentSpan                   RprSpan,

    rprSpanErrorCurrentTtlExpFrames           HCPerfCurrentCount,
    rprSpanErrorCurrentTooLongFrames          HCPerfCurrentCount,
    rprSpanErrorCurrentTooShortFrames         HCPerfCurrentCount,
    rprSpanErrorCurrentBadHecFrames           HCPerfCurrentCount,
    rprSpanErrorCurrentBadFcsFrames           HCPerfCurrentCount,
    rprSpanErrorCurrentSelfSrcUcastFrames     HCPerfCurrentCount,
    rprSpanErrorCurrentPmdAbortFrames         HCPerfCurrentCount,
    rprSpanErrorCurrentBadAddrFrames          HCPerfCurrentCount,
    rprSpanErrorCurrentBadParityFrames        HCPerfCurrentCount,
    rprSpanErrorCurrentContainedFrames        HCPerfCurrentCount,

    rprSpanErrorCurrentScffErrors             HCPerfCurrentCount,
    rprSpanErrorCurrentErroredSeconds         HCPerfCurrentCount,
    rprSpanErrorCurrentSeverelyErroredSeconds HCPerfCurrentCount,
    rprSpanErrorCurrentUnavailableSeconds     HCPerfCurrentCount
    }

rprSpanErrorCurrentIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    REFERENCE   "RFC 2863, ifIndex"
    ::= { rprSpanErrorCountersCurrentEntry 1 }

rprSpanErrorCurrentSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this
         row contains information."
    ::= { rprSpanErrorCountersCurrentEntry 2 }

rprSpanErrorCurrentTtlExpFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) data frames that were dropped 
         due to zero Time To Live (TTL)."
    ::= { rprSpanErrorCountersCurrentEntry 3 }

rprSpanErrorCurrentTooLongFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that exceed the 
         maximum permitted frame size."
    ::= { rprSpanErrorCountersCurrentEntry 4 }

rprSpanErrorCurrentTooShortFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames shortest than the
         minimum permitted frame size."
    ::= { rprSpanErrorCountersCurrentEntry 5 }

rprSpanErrorCurrentBadHecFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames with HEC error."
    ::= { rprSpanErrorCountersCurrentEntry 6 }

rprSpanErrorCurrentBadFcsFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) data and control frames
       where the fcs value did not match the expected fcs value.

       This includes data frames passed to the client as a result of
       rprIfMacOperModes being not set to dropBadFcs."
    ::= { rprSpanErrorCountersCurrentEntry 7 }

rprSpanErrorCurrentSelfSrcUcastFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) unicast frames that were 
         transmitted by the station itself i.e. 
         the source MAC is equal to the interface MAC."
    ::= { rprSpanErrorCountersCurrentEntry 8 }

rprSpanErrorCurrentPmdAbortFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames that were
       aborted by the PMD."
    ::= { rprSpanErrorCountersCurrentEntry 9 }

rprSpanErrorCurrentBadAddrFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       with invalid SA value."
    ::= { rprSpanErrorCountersCurrentEntry 10 }

rprSpanErrorCurrentBadParityFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       parity value not matching the expected parity value"
    ::= { rprSpanErrorCountersCurrentEntry 11 }

rprSpanErrorCurrentContainedFrames OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       that were removed due to context containment"
    ::= { rprSpanErrorCountersCurrentEntry 12 }

rprSpanErrorCurrentScffErrors OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) errored SCFF,
       with bad parity, bad FCS, or both."
    ::= { rprSpanErrorCountersCurrentEntry 13 }

rprSpanErrorCurrentErroredSeconds OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of errored seconds."
    ::= { rprSpanErrorCountersCurrentEntry 14 }

rprSpanErrorCurrentSeverelyErroredSeconds OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of severely errored seconds."
    ::= { rprSpanErrorCountersCurrentEntry 15 }

rprSpanErrorCurrentUnavailableSeconds OBJECT-TYPE
    SYNTAX        HCPerfCurrentCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of unavailable seconds."
    ::= { rprSpanErrorCountersCurrentEntry 16 }


--
-- RPR error interval counters table
--

rprSpanErrorCountersIntervalTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanErrorCountersIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR Errors Interval counters table.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprSpanErrorCounters 2 }

rprSpanErrorCountersIntervalEntry OBJECT-TYPE
    SYNTAX        RprSpanErrorCountersIntervalEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Error statistics collected for a particular interval of a
         particular span of a particular RPR interface.
         The corresponding instance of rprIfValidIntervals indicates
         the number of intervals for which the set of statistics is
         available."
    INDEX { rprSpanErrorIntervalIfIndex,
            rprSpanErrorIntervalSpan, 
            rprSpanErrorIntervalNumber }
    ::= { rprSpanErrorCountersIntervalTable 1 }

RprSpanErrorCountersIntervalEntry ::= SEQUENCE {
    rprSpanErrorIntervalIfIndex                 InterfaceIndex,
    rprSpanErrorIntervalSpan                    RprSpan,
    rprSpanErrorIntervalNumber                  Unsigned32,
    rprSpanErrorIntervalValidData               TruthValue,
    rprSpanErrorIntervalTimeElapsed             Unsigned32,

    rprSpanErrorIntervalTtlExpFrames            HCPerfIntervalCount,
    rprSpanErrorIntervalTooLongFrames           HCPerfIntervalCount,
    rprSpanErrorIntervalTooShortFrames          HCPerfIntervalCount,
    rprSpanErrorIntervalBadHecFrames            HCPerfIntervalCount,
    rprSpanErrorIntervalBadFcsFrames            HCPerfIntervalCount,
    rprSpanErrorIntervalSelfSrcUcastFrames      HCPerfIntervalCount,
    rprSpanErrorIntervalPmdAbortFrames          HCPerfIntervalCount,
    rprSpanErrorIntervalBadAddrFrames           HCPerfIntervalCount,
    rprSpanErrorIntervalBadParityFrames         HCPerfIntervalCount,
    rprSpanErrorIntervalContainedFrames         HCPerfIntervalCount,

    rprSpanErrorIntervalScffErrors              HCPerfIntervalCount,
    rprSpanErrorIntervalErroredSeconds          HCPerfIntervalCount,
    rprSpanErrorIntervalSeverelyErroredSeconds  HCPerfIntervalCount,
    rprSpanErrorIntervalUnavailableSeconds      HCPerfIntervalCount
   }

rprSpanErrorIntervalIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprSpanErrorCountersIntervalEntry 1 }

rprSpanErrorIntervalSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this
         row contains information."
    ::= { rprSpanErrorCountersIntervalEntry 2 }

rprSpanErrorIntervalNumber OBJECT-TYPE
    SYNTAX        Unsigned32 (1..96)
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A number between 1 and 96, which identifies the interval
         for which the set of statistics is available. The interval
         identified by 1 is the most recently completed 15 minute
         interval, and interval identified by N is the interval
         immediately preceding the one identified by N-1."
    ::= { rprSpanErrorCountersIntervalEntry 3 }

rprSpanErrorIntervalValidData OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This variable indicates if the data for this interval 
         is valid.
         It will be valid if it contains data for 900 seconds 
         plus or minus 10 seconds."
    ::= { rprSpanErrorCountersIntervalEntry 4 }

rprSpanErrorIntervalTimeElapsed OBJECT-TYPE
    SYNTAX        Unsigned32 (0..899)
    UNITS         "Seconds"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The duration of a particular interval in seconds.
         If, for some reason, such as an adjustment in the system's
         time-of-day clock, the current interval exceeds the maximum
         value, the agent will return the maximum value."
    ::= { rprSpanErrorCountersIntervalEntry 5 }

rprSpanErrorIntervalTtlExpFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that were dropped due to
         zero Time To Live (TTL) in a particular interval in the
         past 24 hours"
    ::= { rprSpanErrorCountersIntervalEntry 6 }

rprSpanErrorIntervalTooLongFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that exceed the maximum 
         permitted frame size in a particular interval in the
         past 24 hours"
    ::= { rprSpanErrorCountersIntervalEntry 7 }

rprSpanErrorIntervalTooShortFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames shortest than the
         minimum permitted frame size in a particular interval
         in the past 24 hours."
    ::= { rprSpanErrorCountersIntervalEntry 8 }

rprSpanErrorIntervalBadHecFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames with HEC error in a 
         particular interval in the past 24 hours"
    ::= { rprSpanErrorCountersIntervalEntry 9 }

rprSpanErrorIntervalBadFcsFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) data and control frames
       where the fcs value did not match the expected fcs value.

       This includes data frames passed to the client as a result of
       rprIfMacOperModes being not set to dropBadFcs."
    ::= { rprSpanErrorCountersIntervalEntry 10 }

rprSpanErrorIntervalSelfSrcUcastFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) unicast frames that were transmitted
         by the station itself i.e. the source MAC is equal to the 
         interface MAC, in a particular interval in the past 24 hours"
    ::= { rprSpanErrorCountersIntervalEntry 11 }

rprSpanErrorIntervalPmdAbortFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) unicast frames that were aborted
         by the PMD layer, in a particular interval in the past
         24 hours"
    ::= { rprSpanErrorCountersIntervalEntry 12 }

rprSpanErrorIntervalBadAddrFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       with invalid SA value."
    ::= { rprSpanErrorCountersIntervalEntry 13 }

rprSpanErrorIntervalBadParityFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       parity value not matching the expected parity value"
    ::= { rprSpanErrorCountersIntervalEntry 14 }

rprSpanErrorIntervalContainedFrames OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       that were removed due to context containment"
    ::= { rprSpanErrorCountersIntervalEntry 15 }

rprSpanErrorIntervalScffErrors OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) errored SCFF,
       with bad parity, bad FCS, or both."
    ::= { rprSpanErrorCountersIntervalEntry 16 }

rprSpanErrorIntervalErroredSeconds OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of errored seconds."
    ::= { rprSpanErrorCountersIntervalEntry 17 }

rprSpanErrorIntervalSeverelyErroredSeconds OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of severely errored seconds."
    ::= { rprSpanErrorCountersIntervalEntry 18 }

rprSpanErrorIntervalUnavailableSeconds OBJECT-TYPE
    SYNTAX        HCPerfIntervalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of unavailable seconds."
    ::= { rprSpanErrorCountersIntervalEntry 19 }

--
-- RPR error day (24 hour summaries) counters table
--

rprSpanErrorCountersDayTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanErrorCountersDayEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "The RPR Mac Error Day Table contains the cumulative sum
       of the various statistics for the 24 hour period
       preceding the current interval.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprSpanErrorCounters 3 }

rprSpanErrorCountersDayEntry OBJECT-TYPE
    SYNTAX        RprSpanErrorCountersDayEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the RPR Error Day table."
    INDEX { rprSpanErrorDayIfIndex,
            rprSpanErrorDaySpan }
    ::= { rprSpanErrorCountersDayTable 1 }

RprSpanErrorCountersDayEntry ::= SEQUENCE {
    rprSpanErrorDayIfIndex                InterfaceIndex,
    rprSpanErrorDaySpan                   RprSpan,

    rprSpanErrorDayTtlExpFrames           HCPerfTotalCount,
    rprSpanErrorDayTooLongFrames          HCPerfTotalCount,
    rprSpanErrorDayTooShortFrames         HCPerfTotalCount,
    rprSpanErrorDayBadHecFrames           HCPerfTotalCount,
    rprSpanErrorDayBadFcsFrames           HCPerfTotalCount,
    rprSpanErrorDaySelfSrcUcastFrames     HCPerfTotalCount,
    rprSpanErrorDayPmdAbortFrames         HCPerfTotalCount,
    rprSpanErrorDayBadAddrFrames          HCPerfTotalCount,
    rprSpanErrorDayBadParityFrames        HCPerfTotalCount,
    rprSpanErrorDayContainedFrames        HCPerfTotalCount,

    rprSpanErrorDayScffErrors             HCPerfTotalCount,
    rprSpanErrorDayErroredSeconds         HCPerfTotalCount,
    rprSpanErrorDaySeverelyErroredSeconds HCPerfTotalCount,
    rprSpanErrorDayUnavailableSeconds     HCPerfTotalCount
    }

rprSpanErrorDayIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprSpanErrorCountersDayEntry 1 }

rprSpanErrorDaySpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this
         row contains information."
    ::= { rprSpanErrorCountersDayEntry 2 }

rprSpanErrorDayTtlExpFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that were dropped 
         due to zero Time To Live (TTL)."
    ::= { rprSpanErrorCountersDayEntry 3 }

rprSpanErrorDayTooLongFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that exceed the 
         maximum permitted frame size."
    ::= { rprSpanErrorCountersDayEntry 4 }

rprSpanErrorDayTooShortFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames shortest than the
         minimum permitted frame size."
    ::= { rprSpanErrorCountersDayEntry 5 }

rprSpanErrorDayBadHecFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames with HEC error."
    ::= { rprSpanErrorCountersDayEntry 6 }

rprSpanErrorDayBadFcsFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) data and control frames
       where the fcs value did not match the expected fcs value.

       This includes data frames passed to the client as a result of
       rprIfMacOperModes being not set to dropBadFcs."
    ::= { rprSpanErrorCountersDayEntry 7 }

rprSpanErrorDaySelfSrcUcastFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) unicast frames that were 
         transmitted by the station itself i.e. 
         the source MAC is equal to the interface MAC."
    ::= { rprSpanErrorCountersDayEntry 8 }

rprSpanErrorDayPmdAbortFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames that were 
       aborted by the PMD"
    ::= { rprSpanErrorCountersDayEntry 9 }

rprSpanErrorDayBadAddrFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       with invalid SA value."
    ::= { rprSpanErrorCountersDayEntry 10 }

rprSpanErrorDayBadParityFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       parity value not matching the expected parity value"
    ::= { rprSpanErrorCountersDayEntry 11 }

rprSpanErrorDayContainedFrames OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       that were removed due to context containment"
    ::= { rprSpanErrorCountersDayEntry 12 }

rprSpanErrorDayScffErrors OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) errored SCFF,
       with bad parity, bad FCS, or both."
    ::= { rprSpanErrorCountersDayEntry 13 }

rprSpanErrorDayErroredSeconds OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of errored seconds."
    ::= { rprSpanErrorCountersDayEntry 14 }

rprSpanErrorDaySeverelyErroredSeconds OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of severely errored seconds."
    ::= { rprSpanErrorCountersDayEntry 15 }

rprSpanErrorDayUnavailableSeconds OBJECT-TYPE
    SYNTAX        HCPerfTotalCount
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of unavailable seconds."
    ::= { rprSpanErrorCountersDayEntry 16 }

--
-- RPR error total continuously running counters table
--

rprSpanErrorCountersStatsTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF RprSpanErrorCountersStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The RPR Errors total counters table.

         The DiscontinuityTime for this table is indicated by 
         ifCounterDiscontinuityTime defined in ifXTable.

         All attributes in this table are volatile,
         i.e. will be cleared on system reset."
    ::= { rprSpanErrorCounters 4 }

rprSpanErrorCountersStatsEntry OBJECT-TYPE
    SYNTAX        RprSpanErrorCountersStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry in the span error counter table."
    INDEX { rprSpanErrorStatsIfIndex,
            rprSpanErrorStatsSpan }
    ::= { rprSpanErrorCountersStatsTable 1 }

RprSpanErrorCountersStatsEntry ::= SEQUENCE {
    rprSpanErrorStatsIfIndex                InterfaceIndex,
    rprSpanErrorStatsSpan                   RprSpan,

    rprSpanErrorStatsTtlExpFrames           Counter64,
    rprSpanErrorStatsTooLongFrames          Counter64,
    rprSpanErrorStatsTooShortFrames         Counter64,
    rprSpanErrorStatsBadHecFrames           Counter64,
    rprSpanErrorStatsBadFcsFrames           Counter64,
    rprSpanErrorStatsSelfSrcUcastFrames     Counter64,
    rprSpanErrorStatsPmdAbortFrames         Counter64,
    rprSpanErrorStatsBadAddrFrames          Counter64,
    rprSpanErrorStatsBadParityFrames        Counter64,
    rprSpanErrorStatsContainedFrames        Counter64,

    rprSpanErrorStatsScffErrors             Counter64
    }

rprSpanErrorStatsIfIndex OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The ifIndex of this RPR interface."
    ::= { rprSpanErrorCountersStatsEntry 1 }

rprSpanErrorStatsSpan OBJECT-TYPE
    SYNTAX        RprSpan
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An indication of the span of the interface for which this
         row contains information."
REFERENCE
        "IEEE 802.17 Subclause 7.2.2, myRi"
    ::= { rprSpanErrorCountersStatsEntry 2 }

rprSpanErrorStatsTtlExpFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that were dropped 
         due to zero Time To Live (TTL)."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, ttlExpiredFrames"
    ::= { rprSpanErrorCountersStatsEntry 3 }

rprSpanErrorStatsTooLongFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames that exceed the 
         maximum permitted frame size."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, tooLongFrames"
    ::= { rprSpanErrorCountersStatsEntry 4 }

rprSpanErrorStatsTooShortFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames shortest than the
         minimum permitted frame size."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, tooShortFrames"
    ::= { rprSpanErrorCountersStatsEntry 5 }

rprSpanErrorStatsBadHecFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) frames with HEC error."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, badHecFrames"
    ::= { rprSpanErrorCountersStatsEntry 6 }

rprSpanErrorStatsBadFcsFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) data and control frames
       where the fcs value did not match the expected fcs value.

       This includes data frames passed to the client as a result of
       rprIfMacOperModes being not set to dropBadFcs."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, badFcsFrames"
    ::= { rprSpanErrorCountersStatsEntry 7 }

rprSpanErrorStatsSelfSrcUcastFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The number of received (PHY to MAC) unicast frames that were 
         transmitted by the station itself i.e. 
         the source MAC is equal to the interface MAC."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.8.2, selfSourcedFrames"
    ::= { rprSpanErrorCountersStatsEntry 8 }

rprSpanErrorStatsPmdAbortFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames that 
       were aborted by the PMD"
    REFERENCE
        "IEEE 802.17 Subclause 8.2.2, STATUS"
    ::= { rprSpanErrorCountersStatsEntry 9 }

rprSpanErrorStatsBadAddrFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       with invalid SA value."
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, badAddressFrames"
    ::= { rprSpanErrorCountersStatsEntry 10 }

rprSpanErrorStatsBadParityFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       parity value not matching the expected parity value"
    REFERENCE
        "IEEE 802.17 Subclause 7.6.3.6.2, badParityFrames"
    ::= { rprSpanErrorCountersStatsEntry 11 }

rprSpanErrorStatsContainedFrames OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) frames 
       that were removed due to context containment"
    REFERENCE
        "IEEE 802.17 Subclause , containedFrames"
    ::= { rprSpanErrorCountersStatsEntry 12 }

rprSpanErrorStatsScffErrors OBJECT-TYPE
    SYNTAX        Counter64
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
      "The number of received (PHY to MAC) errored SCFF,
       with bad parity, bad FCS, or both."
    REFERENCE
        "IEEE 802.17 Subclause 12.5.1.2, scffErrors"
    ::= { rprSpanErrorCountersStatsEntry 13 }


--
-- conformance information 
--   

rprGroups      OBJECT IDENTIFIER ::= { rprConformance 1 } 
rprCompliances OBJECT IDENTIFIER ::= { rprConformance 2 } 


rprModuleTotalStatsCompliance MODULE-COMPLIANCE 
    STATUS  current 
    DESCRIPTION 
      "The compliance statement for agent that support RPR operation
       with total statistics collections." 
   
    MODULE  -- this module 
        MANDATORY-GROUPS { rprIfGroup,
                           rprSpanGroup,
                           rprSpanProtectionGroup,
                           rprTopoGroup,
                           rprFairnessGroup,
                           rprSpanStatsGroup,
                           rprClientStatsGroup,
                           rprErrorStatsGroup } 

        GROUP rprIfGroupOpt
        DESCRIPTION
          "Collection of objects for RPR MAC.
           This group is optional."

        GROUP rprSpanGroupOpt
        DESCRIPTION
          "Collection of objects for RPR span.
           This group is optional."

        GROUP rprIfStatsControlGroup
        DESCRIPTION
          "Current, interval, total intervals and running counters management.
           This group is optional."

        GROUP rprFairnessGroupOpt
        DESCRIPTION
          "Collection of objects for RPR fairness.
           This group is optional."

        GROUP rprOamGroup
        DESCRIPTION
          "OAM Echo and Flush control and status table.
           This group is optional."

        GROUP rprIfChangeSummaryGroup
        DESCRIPTION
          "RPR interfaces changes summry group.
           This group is optional."

        GROUP rprSpanCurrentGroup
        DESCRIPTION
          "Collection of RPR MAC Span current interval counters.
           This group is optional."

        GROUP rprSpanIntervalGroup
        DESCRIPTION
          "Collection of RPR MAC Span counters during specific 15min
           interval. This group is optional."

        GROUP rprSpanDayGroup
        DESCRIPTION
          "Collection of RPR MAC Span Day counters, contains the
           cumulative sum of the span statistics for the 24 hour period
           preceding the current interval.

           This group is optional, the Span Day statistics can be
           calculated from the 96 15min Intervals table."

        GROUP rprClientCurrentGroup
        DESCRIPTION
          "Collection of RPR MAC client interface current interval counters.
           This group is optional."

        GROUP rprClientIntervalGroup
        DESCRIPTION
          "Collection of RPR MAC client interface counters during 
           specific 15min interval. This group is optional."

        GROUP rprClientDayGroup
        DESCRIPTION
          "Collection of RPR MAC Client Day counters, contains the
           cumulative sum of the client interface statistics for the 24
           hour period preceding the current interval.

           This group is optional, the client Day statistics can be
           calculated from the 96 15min Intervals table."

        GROUP rprErrorCurrentGroup
        DESCRIPTION
          "Collection of RPR MAC span error current interval counters.
           This group is optional."

        GROUP rprErrorIntervalGroup
        DESCRIPTION
          "Collection of RPR MAC span error counters during 
           specific 15min interval. This group is optional."

        GROUP rprErrorDayGroup
        DESCRIPTION
          "Collection of RPR MAC Error Day counters, contains the
           cumulative sum of the span error statistics for the 24 
           hour period preceding the current interval.

           This group is optional, the error Day statistics can be
           calculated from the 96 15min Intervals table."

     ::= { rprCompliances 1 }

--   
-- Units of conformance.
--

rprIfGroup   OBJECT-GROUP  
     OBJECTS {
              rprIfStationsOnRing,
              rprIfReversionMode,
              rprIfProtectionWTR,
              rprIfProtectionFastTimer,
              rprIfProtectionSlowTimer,
              rprIfAtdTimer,
              rprIfKeepaliveTimeout,
              rprIfFairnessAggressive,
              rprIfPtqSize,
              rprIfStqSize,
              rprIfSTQFullThreshold,
              rprIfIdleThreshold,
              rprIfSesThreshold,
              rprIfWrapConfig,
              rprIfJumboFramePreferred,
              rprIfMacOperModes,
              rprIfRingOperModes,
              rprIfCurrentStatus
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR MAC 
             configuration." 
     ::= { rprGroups 1 } 

rprIfGroupOpt   OBJECT-GROUP  
     OBJECTS {
              rprIfLastChange,
              rprIfChanges
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects for RPR MAC." 
     ::= { rprGroups 2 } 

rprIfStatsControlGroup   OBJECT-GROUP  
     OBJECTS {
              rprIfStatsControlPeriodClear,
              rprIfStatsControlCountPointClear,
              rprIfStatsControlIntervalClear,
              rprIfStatsControlCommitClear,
              rprIfStatsControlTimeElapsed,
              rprIfStatsControlValidIntervals
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR MAC 
             statistics management." 
     ::= { rprGroups 3 } 

rprSpanGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanLowerLayerIfIndex,
              rprSpanTotalRingletReservedRate,
              rprSpanCurrentStatus
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR Span
             configuration." 
     ::= { rprGroups 4 } 

rprSpanGroupOpt   OBJECT-GROUP  
     OBJECTS {
              rprSpanLastChange,
              rprSpanChanges
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects for RPR Span." 
     ::= { rprGroups 5 } 

rprSpanProtectionGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanProtectionNeighborValid,
              rprSpanProtectionHoldOffTimer,
              rprSpanProtectionCommand,
              rprSpanProtectionCount,
              rprSpanProtectionDuration,
              rprSpanProtectionLastActivationTime
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR Span
             Protection monitoring." 
     ::= { rprGroups 6 } 

rprTopoGroup   OBJECT-GROUP  
     OBJECTS {
              rprTopoImageSecMacAddress1,
              rprTopoImageSecMacAddress2,
              rprTopoImageStationIfIndex,
              rprTopoImageStationName,
              rprTopoImageInetAddressType,
              rprTopoImageInetAddress,
              rprTopoImageCapability,
              rprTopoImageRinglet0Hops,
              rprTopoImageRinglet0ReservedRate,
              rprTopoImageRinglet1Hops,
              rprTopoImageRinglet1ReservedRate,
              rprTopoImageWestProtectionStatus,
              rprTopoImageWestWeight,
              rprTopoImageEastProtectionStatus,
              rprTopoImageEastWeight,
              rprTopoImageStatus
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR Topology
             discovery." 
     ::= { rprGroups 7 } 

rprFairnessGroup   OBJECT-GROUP  
     OBJECTS {
              rprFairnessRingletWeight,
              rprFairnessReservedRate,
              rprFairnessMaxAllowed,
              rprFairnessAgeCoef,
              rprFairnessRampCoef,
              rprFairnessLpCoef,
              rprFairnessAdvertisementRatio,
              rprFairnessMcffReportCoef,
              rprFairnessActiveWeightsCoef,
              rprFairnessSTQHighThreshold,
              rprFairnessSTQMedThreshold,
              rprFairnessSTQLowThreshold,
              rprFairnessRateHighThreshold,
              rprFairnessRateLowThreshold,
              rprFairnessResetWaterMarks,
              rprFairnessSTQHighWaterMark,
              rprFairnessSTQLowWaterMark
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR Fairness
             configuration." 
     ::= { rprGroups 8 } 

rprFairnessGroupOpt   OBJECT-GROUP  
     OBJECTS {
              rprFairnessLastChange,
              rprFairnessChanges
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects for RPR Fairness." 
     ::= { rprGroups 9 } 

rprOamGroup   OBJECT-GROUP  
     OBJECTS {
              rprOamActionType,
              rprOamDestAddress,
              rprOamRequestRinglet,
              rprOamResponseRinglet,
              rprOamClassOfService,
              rprOamUserData,
              rprOamProtected,
              rprOamRequestCount,
              rprOamTimeout,
              rprOamControl,
              rprOamResponseCount,
              rprOamAvResponseTime,
              rprOamResponseStatus
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects needed for RPR OAM
             configuration." 
     ::= { rprGroups 10 } 

rprIfChangeSummaryGroup   OBJECT-GROUP  
     OBJECTS {
              rprIfChangeSummaryNumInterfaces,
              rprIfChangeSummaryIfLastChange,
              rprIfChangeSummaryIfChanges,
              rprIfChangeSummarySpanLastChange,
              rprIfChangeSummarySpanChanges,
              rprIfChangeSummaryFairnessLastChange,
              rprIfChangeSummaryFairnessChanges
             }
     STATUS  current 
     DESCRIPTION 
            "Collection of objects summarizes changes on
             the RPR interfaces." 
     ::= { rprGroups 11 } 

rprSpanCurrentGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanCurrentInUcastClassAFrames,
              rprSpanCurrentInUcastClassAOctets,
              rprSpanCurrentInUcastClassBCirFrames,
              rprSpanCurrentInUcastClassBCirOctets,
              rprSpanCurrentInUcastClassBEirFrames,
              rprSpanCurrentInUcastClassBEirOctets,
              rprSpanCurrentInUcastClassCFrames,
              rprSpanCurrentInUcastClassCOctets,
              rprSpanCurrentInMcastClassAFrames,
              rprSpanCurrentInMcastClassAOctets,
              rprSpanCurrentInMcastClassBCirFrames,
              rprSpanCurrentInMcastClassBCirOctets,
              rprSpanCurrentInMcastClassBEirFrames,
              rprSpanCurrentInMcastClassBEirOctets,
              rprSpanCurrentInMcastClassCFrames,
              rprSpanCurrentInMcastClassCOctets,
              rprSpanCurrentOutUcastClassAFrames,
              rprSpanCurrentOutUcastClassAOctets,
              rprSpanCurrentOutUcastClassBCirFrames,
              rprSpanCurrentOutUcastClassBCirOctets,
              rprSpanCurrentOutUcastClassBEirFrames,
              rprSpanCurrentOutUcastClassBEirOctets,
              rprSpanCurrentOutUcastClassCFrames,
              rprSpanCurrentOutUcastClassCOctets,
              rprSpanCurrentOutMcastClassAFrames,
              rprSpanCurrentOutMcastClassAOctets,
              rprSpanCurrentOutMcastClassBCirFrames,
              rprSpanCurrentOutMcastClassBCirOctets,
              rprSpanCurrentOutMcastClassBEirFrames,
              rprSpanCurrentOutMcastClassBEirOctets,
              rprSpanCurrentOutMcastClassCFrames,
              rprSpanCurrentOutMcastClassCOctets
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span current
             statistics." 
     ::= { rprGroups 12 } 

rprSpanIntervalGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanIntervalValidData,
              rprSpanIntervalTimeElapsed,
              rprSpanIntervalStartTime,
              rprSpanIntervalInUcastClassAFrames,
              rprSpanIntervalInUcastClassAOctets,
              rprSpanIntervalInUcastClassBCirFrames,
              rprSpanIntervalInUcastClassBCirOctets,
              rprSpanIntervalInUcastClassBEirFrames,
              rprSpanIntervalInUcastClassBEirOctets,
              rprSpanIntervalInUcastClassCFrames,
              rprSpanIntervalInUcastClassCOctets,
              rprSpanIntervalInMcastClassAFrames,
              rprSpanIntervalInMcastClassAOctets,
              rprSpanIntervalInMcastClassBCirFrames,
              rprSpanIntervalInMcastClassBCirOctets,
              rprSpanIntervalInMcastClassBEirFrames,
              rprSpanIntervalInMcastClassBEirOctets,
              rprSpanIntervalInMcastClassCFrames,
              rprSpanIntervalInMcastClassCOctets,
              rprSpanIntervalOutUcastClassAFrames,
              rprSpanIntervalOutUcastClassAOctets,
              rprSpanIntervalOutUcastClassBCirFrames,
              rprSpanIntervalOutUcastClassBCirOctets,
              rprSpanIntervalOutUcastClassBEirFrames,
              rprSpanIntervalOutUcastClassBEirOctets,
              rprSpanIntervalOutUcastClassCFrames,
              rprSpanIntervalOutUcastClassCOctets,
              rprSpanIntervalOutMcastClassAFrames,
              rprSpanIntervalOutMcastClassAOctets,
              rprSpanIntervalOutMcastClassBCirFrames,
              rprSpanIntervalOutMcastClassBCirOctets,
              rprSpanIntervalOutMcastClassBEirFrames,
              rprSpanIntervalOutMcastClassBEirOctets,
              rprSpanIntervalOutMcastClassCFrames,
              rprSpanIntervalOutMcastClassCOctets
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span intervals
             statistics." 
     ::= { rprGroups 13 } 

rprSpanDayGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanDayInUcastClassAFrames,
              rprSpanDayInUcastClassAOctets,
              rprSpanDayInUcastClassBCirFrames,
              rprSpanDayInUcastClassBCirOctets,
              rprSpanDayInUcastClassBEirFrames,
              rprSpanDayInUcastClassBEirOctets,
              rprSpanDayInUcastClassCFrames,
              rprSpanDayInUcastClassCOctets,
              rprSpanDayInMcastClassAFrames,
              rprSpanDayInMcastClassAOctets,
              rprSpanDayInMcastClassBCirFrames,
              rprSpanDayInMcastClassBCirOctets,
              rprSpanDayInMcastClassBEirFrames,
              rprSpanDayInMcastClassBEirOctets,
              rprSpanDayInMcastClassCFrames,
              rprSpanDayInMcastClassCOctets,
              rprSpanDayOutUcastClassAFrames,
              rprSpanDayOutUcastClassAOctets,
              rprSpanDayOutUcastClassBCirFrames,
              rprSpanDayOutUcastClassBCirOctets,
              rprSpanDayOutUcastClassBEirFrames,
              rprSpanDayOutUcastClassBEirOctets,
              rprSpanDayOutUcastClassCFrames,
              rprSpanDayOutUcastClassCOctets,
              rprSpanDayOutMcastClassAFrames,
              rprSpanDayOutMcastClassAOctets,
              rprSpanDayOutMcastClassBCirFrames,
              rprSpanDayOutMcastClassBCirOctets,
              rprSpanDayOutMcastClassBEirFrames,
              rprSpanDayOutMcastClassBEirOctets,
              rprSpanDayOutMcastClassCFrames,
              rprSpanDayOutMcastClassCOctets
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span 24 hours
             statistics." 
     ::= { rprGroups 14 } 

rprSpanStatsGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanStatsInUcastClassAFrames,
              rprSpanStatsInUcastClassAOctets,
              rprSpanStatsInUcastClassBCirFrames,
              rprSpanStatsInUcastClassBCirOctets,
              rprSpanStatsInUcastClassBEirFrames,
              rprSpanStatsInUcastClassBEirOctets,
              rprSpanStatsInUcastClassCFrames,
              rprSpanStatsInUcastClassCOctets,
              rprSpanStatsInMcastClassAFrames,
              rprSpanStatsInMcastClassAOctets,
              rprSpanStatsInMcastClassBCirFrames,
              rprSpanStatsInMcastClassBCirOctets,
              rprSpanStatsInMcastClassBEirFrames,
              rprSpanStatsInMcastClassBEirOctets,
              rprSpanStatsInMcastClassCFrames,
              rprSpanStatsInMcastClassCOctets,
              rprSpanStatsInCtrlFrames,
              rprSpanStatsInOamEchoFrames,
              rprSpanStatsInOamFlushFrames,
              rprSpanStatsInOamOrgFrames,
              rprSpanStatsInTopoAtdFrames,
              rprSpanStatsInTopoChkSumFrames,
              rprSpanStatsInTopoTpFrames,
              rprSpanStatsOutUcastClassAFrames,
              rprSpanStatsOutUcastClassAOctets,
              rprSpanStatsOutUcastClassBCirFrames,
              rprSpanStatsOutUcastClassBCirOctets,
              rprSpanStatsOutUcastClassBEirFrames,
              rprSpanStatsOutUcastClassBEirOctets,
              rprSpanStatsOutUcastClassCFrames,
              rprSpanStatsOutUcastClassCOctets,
              rprSpanStatsOutMcastClassAFrames,
              rprSpanStatsOutMcastClassAOctets,
              rprSpanStatsOutMcastClassBCirFrames,
              rprSpanStatsOutMcastClassBCirOctets,
              rprSpanStatsOutMcastClassBEirFrames,
              rprSpanStatsOutMcastClassBEirOctets,
              rprSpanStatsOutMcastClassCFrames,
              rprSpanStatsOutMcastClassCOctets,
              rprSpanStatsOutCtrlFrames,
              rprSpanStatsOutOamEchoFrames,
              rprSpanStatsOutOamFlushFrames,
              rprSpanStatsOutOamOrgFrames,
              rprSpanStatsOutTopoAtdFrames,
              rprSpanStatsOutTopoChkSumFrames,
              rprSpanStatsOutTopoTpFrames
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span total
             statistics." 
     ::= { rprGroups 15 } 

rprClientCurrentGroup   OBJECT-GROUP  
     OBJECTS {
              rprClientCurrentInUcastClassAFrames,
              rprClientCurrentInUcastClassAOctets,
              rprClientCurrentInUcastClassBCirFrames,
              rprClientCurrentInUcastClassBCirOctets,
              rprClientCurrentInUcastClassBEirFrames,
              rprClientCurrentInUcastClassBEirOctets,
              rprClientCurrentInUcastClassCFrames,
              rprClientCurrentInUcastClassCOctets,
              rprClientCurrentInMcastClassAFrames,
              rprClientCurrentInMcastClassAOctets,
              rprClientCurrentInMcastClassBCirFrames,
              rprClientCurrentInMcastClassBCirOctets,
              rprClientCurrentInMcastClassBEirFrames,
              rprClientCurrentInMcastClassBEirOctets,
              rprClientCurrentInMcastClassCFrames,
              rprClientCurrentInMcastClassCOctets,
              rprClientCurrentOutUcastClassAFrames,
              rprClientCurrentOutUcastClassAOctets,
              rprClientCurrentOutUcastClassBCirFrames,
              rprClientCurrentOutUcastClassBCirOctets,
              rprClientCurrentOutUcastClassBEirFrames,
              rprClientCurrentOutUcastClassBEirOctets,
              rprClientCurrentOutUcastClassCFrames,
              rprClientCurrentOutUcastClassCOctets,
              rprClientCurrentOutMcastClassAFrames,
              rprClientCurrentOutMcastClassAOctets,
              rprClientCurrentOutMcastClassBCirFrames,
              rprClientCurrentOutMcastClassBCirOctets,
              rprClientCurrentOutMcastClassBEirFrames,
              rprClientCurrentOutMcastClassBEirOctets,
              rprClientCurrentOutMcastClassCFrames,
              rprClientCurrentOutMcastClassCOctets
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC client interface
             current statistics." 
     ::= { rprGroups 16 } 

rprClientIntervalGroup   OBJECT-GROUP  
     OBJECTS {
              rprClientIntervalValidData,
              rprClientIntervalTimeElapsed,
              rprClientIntervalInUcastClassAFrames,
              rprClientIntervalInUcastClassAOctets,
              rprClientIntervalInUcastClassBCirFrames,
              rprClientIntervalInUcastClassBCirOctets,
              rprClientIntervalInUcastClassBEirFrames,
              rprClientIntervalInUcastClassBEirOctets,
              rprClientIntervalInUcastClassCFrames,
              rprClientIntervalInUcastClassCOctets,
              rprClientIntervalInMcastClassAFrames,
              rprClientIntervalInMcastClassAOctets,
              rprClientIntervalInMcastClassBCirFrames,
              rprClientIntervalInMcastClassBCirOctets,
              rprClientIntervalInMcastClassBEirFrames,
              rprClientIntervalInMcastClassBEirOctets,
              rprClientIntervalInMcastClassCFrames,
              rprClientIntervalInMcastClassCOctets,
              rprClientIntervalOutUcastClassAFrames,
              rprClientIntervalOutUcastClassAOctets,
              rprClientIntervalOutUcastClassBCirFrames,
              rprClientIntervalOutUcastClassBCirOctets,
              rprClientIntervalOutUcastClassBEirFrames,
              rprClientIntervalOutUcastClassBEirOctets,
              rprClientIntervalOutUcastClassCFrames,
              rprClientIntervalOutUcastClassCOctets,
              rprClientIntervalOutMcastClassAFrames,
              rprClientIntervalOutMcastClassAOctets,
              rprClientIntervalOutMcastClassBCirFrames,
              rprClientIntervalOutMcastClassBCirOctets,
              rprClientIntervalOutMcastClassBEirFrames,
              rprClientIntervalOutMcastClassBEirOctets,
              rprClientIntervalOutMcastClassCFrames,
              rprClientIntervalOutMcastClassCOctets
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC client interface
             intervals statistics." 
     ::= { rprGroups 17 } 

rprClientDayGroup   OBJECT-GROUP  
     OBJECTS {
              rprClientDayInUcastClassAFrames,
              rprClientDayInUcastClassAOctets,
              rprClientDayInUcastClassBCirFrames,
              rprClientDayInUcastClassBCirOctets,
              rprClientDayInUcastClassBEirFrames,
              rprClientDayInUcastClassBEirOctets,
              rprClientDayInUcastClassCFrames,
              rprClientDayInUcastClassCOctets,
              rprClientDayInMcastClassAFrames,
              rprClientDayInMcastClassAOctets,
              rprClientDayInMcastClassBCirFrames,
              rprClientDayInMcastClassBCirOctets,
              rprClientDayInMcastClassBEirFrames,
              rprClientDayInMcastClassBEirOctets,
              rprClientDayInMcastClassCFrames,
              rprClientDayInMcastClassCOctets,
              rprClientDayOutUcastClassAFrames,
              rprClientDayOutUcastClassAOctets,
              rprClientDayOutUcastClassBCirFrames,
              rprClientDayOutUcastClassBCirOctets,
              rprClientDayOutUcastClassBEirFrames,
              rprClientDayOutUcastClassBEirOctets,
              rprClientDayOutUcastClassCFrames,
              rprClientDayOutUcastClassCOctets,
              rprClientDayOutMcastClassAFrames,
              rprClientDayOutMcastClassAOctets,
              rprClientDayOutMcastClassBCirFrames,
              rprClientDayOutMcastClassBCirOctets,
              rprClientDayOutMcastClassBEirFrames,
              rprClientDayOutMcastClassBEirOctets,
              rprClientDayOutMcastClassCFrames,
              rprClientDayOutMcastClassCOctets
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC client interface
             24 hours statistics." 
     ::= { rprGroups 18 } 

rprClientStatsGroup   OBJECT-GROUP  
     OBJECTS {
              rprClientStatsInUcastClassAFrames,
              rprClientStatsInUcastClassAOctets,
              rprClientStatsInUcastClassBCirFrames,
              rprClientStatsInUcastClassBCirOctets,
              rprClientStatsInUcastClassBEirFrames,
              rprClientStatsInUcastClassBEirOctets,
              rprClientStatsInUcastClassCFrames,
              rprClientStatsInUcastClassCOctets,
              rprClientStatsInMcastClassAFrames,
              rprClientStatsInMcastClassAOctets,
              rprClientStatsInMcastClassBCirFrames,
              rprClientStatsInMcastClassBCirOctets,
              rprClientStatsInMcastClassBEirFrames,
              rprClientStatsInMcastClassBEirOctets,
              rprClientStatsInMcastClassCFrames,
              rprClientStatsInMcastClassCOctets,
              rprClientStatsInBcastFrames,
              rprClientStatsOutUcastClassAFrames,
              rprClientStatsOutUcastClassAOctets,
              rprClientStatsOutUcastClassBCirFrames,
              rprClientStatsOutUcastClassBCirOctets,
              rprClientStatsOutUcastClassBEirFrames,
              rprClientStatsOutUcastClassBEirOctets,
              rprClientStatsOutUcastClassCFrames,
              rprClientStatsOutUcastClassCOctets,
              rprClientStatsOutMcastClassAFrames,
              rprClientStatsOutMcastClassAOctets,
              rprClientStatsOutMcastClassBCirFrames,
              rprClientStatsOutMcastClassBCirOctets,
              rprClientStatsOutMcastClassBEirFrames,
              rprClientStatsOutMcastClassBEirOctets,
              rprClientStatsOutMcastClassCFrames,
              rprClientStatsOutMcastClassCOctets,
              rprClientStatsOutBcastFrames
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC client interface
             total statistics." 
     ::= { rprGroups 19 } 

rprErrorCurrentGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanErrorCurrentTtlExpFrames,
              rprSpanErrorCurrentTooLongFrames,
              rprSpanErrorCurrentTooShortFrames,
              rprSpanErrorCurrentBadHecFrames,
              rprSpanErrorCurrentBadFcsFrames,
              rprSpanErrorCurrentSelfSrcUcastFrames,
              rprSpanErrorCurrentPmdAbortFrames,
              rprSpanErrorCurrentBadAddrFrames,
              rprSpanErrorCurrentBadParityFrames,
              rprSpanErrorCurrentContainedFrames,
              rprSpanErrorCurrentScffErrors,
              rprSpanErrorCurrentErroredSeconds,
              rprSpanErrorCurrentSeverelyErroredSeconds,
              rprSpanErrorCurrentUnavailableSeconds
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span error
             current statistics." 
     ::= { rprGroups 20 } 

rprErrorIntervalGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanErrorIntervalValidData,
              rprSpanErrorIntervalTimeElapsed,
              rprSpanErrorIntervalTtlExpFrames,
              rprSpanErrorIntervalTooLongFrames,
              rprSpanErrorIntervalTooShortFrames,
              rprSpanErrorIntervalBadHecFrames,
              rprSpanErrorIntervalBadFcsFrames,
              rprSpanErrorIntervalSelfSrcUcastFrames,
              rprSpanErrorIntervalPmdAbortFrames,
              rprSpanErrorIntervalBadAddrFrames,
              rprSpanErrorIntervalBadParityFrames,
              rprSpanErrorIntervalContainedFrames,
              rprSpanErrorIntervalScffErrors,
              rprSpanErrorIntervalErroredSeconds,
              rprSpanErrorIntervalSeverelyErroredSeconds,
              rprSpanErrorIntervalUnavailableSeconds
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span error
             intervals statistics." 
     ::= { rprGroups 21 } 

rprErrorDayGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanErrorDayTtlExpFrames,
              rprSpanErrorDayTooLongFrames,
              rprSpanErrorDayTooShortFrames,
              rprSpanErrorDayBadHecFrames,
              rprSpanErrorDayBadFcsFrames,
              rprSpanErrorDaySelfSrcUcastFrames,
              rprSpanErrorDayPmdAbortFrames,
              rprSpanErrorDayBadAddrFrames,
              rprSpanErrorDayBadParityFrames,
              rprSpanErrorDayContainedFrames,
              rprSpanErrorDayScffErrors,
              rprSpanErrorDayErroredSeconds,
              rprSpanErrorDaySeverelyErroredSeconds,
              rprSpanErrorDayUnavailableSeconds
            } 
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span error
             24 hours statistics." 
     ::= { rprGroups 22 } 

rprErrorStatsGroup   OBJECT-GROUP  
     OBJECTS {
              rprSpanErrorStatsTtlExpFrames,
              rprSpanErrorStatsTooLongFrames,
              rprSpanErrorStatsTooShortFrames,
              rprSpanErrorStatsBadHecFrames,
              rprSpanErrorStatsBadFcsFrames,
              rprSpanErrorStatsSelfSrcUcastFrames,
              rprSpanErrorStatsPmdAbortFrames,
              rprSpanErrorStatsBadAddrFrames,
              rprSpanErrorStatsBadParityFrames,
              rprSpanErrorStatsContainedFrames,
              rprSpanErrorStatsScffErrors
            }
     STATUS  current 
     DESCRIPTION 
            "Collection of objects counting MAC span error
             total statistics." 
     ::= { rprGroups 23 } 

END