david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/IEEE8021-Q-BRIDGE-MIB

2520 lines
94 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
IEEE8021-Q-BRIDGE-MIB DEFINITIONS ::= BEGIN
-- =============================================================
-- MIB for IEEE 802.1Q Devices
-- =============================================================
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Gauge32,
Counter64, Unsigned32, TimeTicks, Integer32
FROM SNMPv2-SMI
RowStatus, StorageType, TruthValue, MacAddress
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ieee8021BridgeBasePortComponentId, ieee8021BridgeBasePort,
ieee8021BridgeBasePortEntry
FROM IEEE8021-BRIDGE-MIB
ieee802dot1mibs, IEEE8021PbbComponentIdentifier,
IEEE8021BridgePortNumber, IEEE8021BridgePortNumberOrZero,
IEEE8021VlanIndex, IEEE8021VlanIndexOrWildcard,
IEEE8021PortAcceptableFrameTypes
FROM IEEE8021-TC-MIB
PortList, VlanId
FROM Q-BRIDGE-MIB
TimeFilter
FROM RMON2-MIB;
ieee8021QBridgeMib MODULE-IDENTITY
LAST-UPDATED "201112120000Z" -- December 12, 2011
ORGANIZATION "IEEE 802.1 Working Group"
CONTACT-INFO
" WG-URL: http://grouper.ieee.org/groups/802/1/index.html
WG-EMail: stds-802-1@ieee.org
Contact: David Levi
Postal: C/O IEEE 802.1 Working Group
IEEE Standards Association
445 Hoes Lane
P.O. Box 1331
Piscataway
NJ 08855-1331
USA
E-mail: STDS-802-1-L@LISTSERV.IEEE.ORG"
DESCRIPTION
"The VLAN Bridge MIB module for managing Virtual Bridged
Local Area Networks, as defined by IEEE 802.1Q-2011.
This MIB module is derived from the IETF Q-BRIDGE-MIB
from RFC 4363.
Unless otherwise indicated, the references in this MIB
module are to IEEE 802.1Q-2010.
Copyright (C) IEEE.
This version of this MIB module is part of IEEE802.1Q;
see the draft itself for full legal notices."
REVISION "201112120000Z" -- December 12, 2011
DESCRIPTION
"Addition of the VID Translation MIB Subtree for 802.1aq"
REVISION "201102270000Z" -- February 27, 2011
DESCRIPTION
"Minor edits to contact information etc. as part of
2011 revision of IEEE Std 802.1Q."
REVISION "200810150000Z" -- October 15, 2008
DESCRIPTION
"Initial version, derived from RFC 4363."
::= { ieee802dot1mibs 4 }
ieee8021QBridgeMibObjects OBJECT IDENTIFIER ::= { ieee8021QBridgeMib 1 }
-- =============================================================
-- subtrees in the Q-BRIDGE MIB
-- =============================================================
ieee8021QBridgeBase OBJECT IDENTIFIER ::= { ieee8021QBridgeMibObjects 1 }
ieee8021QBridgeTp OBJECT IDENTIFIER ::= { ieee8021QBridgeMibObjects 2 }
ieee8021QBridgeStatic OBJECT IDENTIFIER ::= { ieee8021QBridgeMibObjects 3 }
ieee8021QBridgeVlan OBJECT IDENTIFIER ::= { ieee8021QBridgeMibObjects 4 }
ieee8021QBridgeProtocol OBJECT IDENTIFIER ::= { ieee8021QBridgeMibObjects 5 }
ieee8021QBridgeVIDX OBJECT IDENTIFIER ::= { ieee8021QBridgeMibObjects 6 }
-- =============================================================
-- ieee8021QBridgeBase subtree
-- =============================================================
-- =============================================================
-- ieee8021QBridgeTable - Table of VLAN bridges
-- =============================================================
ieee8021QBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains generic information about every
VLAN bridge."
REFERENCE "12.4"
::= { ieee8021QBridgeBase 1 }
ieee8021QBridgeEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects containing information for each VLAN bridge."
INDEX { ieee8021QBridgeComponentId }
::= { ieee8021QBridgeTable 1 }
Ieee8021QBridgeEntry ::=
SEQUENCE {
ieee8021QBridgeComponentId IEEE8021PbbComponentIdentifier,
ieee8021QBridgeVlanVersionNumber INTEGER,
ieee8021QBridgeMaxVlanId VlanId,
ieee8021QBridgeMaxSupportedVlans Unsigned32,
ieee8021QBridgeNumVlans Gauge32,
ieee8021QBridgeMvrpEnabledStatus TruthValue
}
ieee8021QBridgeComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeEntry 1 }
ieee8021QBridgeVlanVersionNumber OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of IEEE 802.1Q that this device
supports. Reported as 1 by VLAN Bridges that support
only SST operation, and reported as 2 by VLAN Bridges
that support MST operation."
REFERENCE "12.10.1.1"
::= { ieee8021QBridgeEntry 2 }
ieee8021QBridgeMaxVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum IEEE 802.1Q VLAN-ID that this device
supports."
REFERENCE "9.6"
::= { ieee8021QBridgeEntry 3 }
ieee8021QBridgeMaxSupportedVlans OBJECT-TYPE
SYNTAX Unsigned32
UNITS "vlans"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IEEE 802.1Q VLANs that this
device supports."
REFERENCE "12.10.1.1"
::= { ieee8021QBridgeEntry 4 }
ieee8021QBridgeNumVlans OBJECT-TYPE
SYNTAX Gauge32
UNITS "vlans"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of IEEE 802.1Q VLANs that are
configured in this device."
REFERENCE "12.7.1.1"
::= { ieee8021QBridgeEntry 5 }
ieee8021QBridgeMvrpEnabledStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for
MVRP. The value true(1) indicates that MVRP should
be enabled on this device, on all ports for which it has
not been specifically disabled. When false(2), MVRP
is disabled on all ports, and all MVRP packets will be
forwarded transparently. This object affects all MVRP
Applicant and Registrar state machines. A transition
from false(2) to true(1) will cause a reset of all
MVRP state machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { true }
::= { ieee8021QBridgeEntry 6 }
-- =============================================================
-- ieee8021QBridgeCVlanPortTable - Table of C-VLAN ports
-- =============================================================
ieee8021QBridgeCVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeCVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the capability to create and delete
customer VLAN ports. Entries in this table must be
persistent over power up restart/reboot."
REFERENCE "12.16.1.1.3 h4), 12.16.2.1/2,
12.13.1.1, 12.13.1.2, 12.15.2.1, 12.15.2.2"
::= { ieee8021QBridgeBase 2 }
ieee8021QBridgeCVlanPortEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeCVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects containing information for each VLAN bridge."
INDEX { ieee8021QBridgeCVlanPortComponentId,
ieee8021QBridgeCVlanPortNumber }
::= { ieee8021QBridgeCVlanPortTable 1 }
Ieee8021QBridgeCVlanPortEntry ::=
SEQUENCE {
ieee8021QBridgeCVlanPortComponentId IEEE8021PbbComponentIdentifier,
ieee8021QBridgeCVlanPortNumber IEEE8021BridgePortNumber,
ieee8021QBridgeCVlanPortRowStatus RowStatus
}
ieee8021QBridgeCVlanPortComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The componentcontaining the customer VLAN port represented
by this row."
::= { ieee8021QBridgeCVlanPortEntry 1 }
ieee8021QBridgeCVlanPortNumber OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The customer VLAN port number represented by this row."
::= { ieee8021QBridgeCVlanPortEntry 2 }
ieee8021QBridgeCVlanPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the status of the entry, and is used to create
and delete entries in this table. Each entry in this table that
is valid will have a corresponding entry in the
ieee8021BridgeBasePortTable whose value for
ieee8021BridgeBasePortType is customerVlanPort(2). The
corresponding value of ieee8021BridgeBasePortIfIndex must
be set at the time the value of this object transitions
to valid(1).
Entries in this table must be persistent across
reinitializations of the management system."
::= { ieee8021QBridgeCVlanPortEntry 3 }
-- =============================================================
-- the ieee8021QBridgeTp subtree
-- =============================================================
-- =============================================================
-- the current Filtering Database Table
-- =============================================================
ieee8021QBridgeFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains configuration and control
information for each Filtering Database currently
operating on this device. Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
ieee8021QBridgeVlanCurrentTable."
REFERENCE "12.7.1"
::= { ieee8021QBridgeTp 1 }
ieee8021QBridgeFdbEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific Filtering Database."
INDEX { ieee8021QBridgeFdbComponentId,
ieee8021QBridgeFdbId }
::= { ieee8021QBridgeFdbTable 1 }
Ieee8021QBridgeFdbEntry ::=
SEQUENCE {
ieee8021QBridgeFdbComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeFdbId
Unsigned32,
ieee8021QBridgeFdbDynamicCount
Gauge32,
ieee8021QBridgeFdbLearnedEntryDiscards
Counter64,
ieee8021QBridgeFdbAgingTime
Integer32
}
ieee8021QBridgeFdbComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeFdbEntry 1 }
ieee8021QBridgeFdbId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identity of this Filtering Database."
::= { ieee8021QBridgeFdbEntry 2 }
ieee8021QBridgeFdbDynamicCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "database entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of dynamic entries in this
Filtering Database."
REFERENCE "12.7.1.1.3"
::= { ieee8021QBridgeFdbEntry 3 }
ieee8021QBridgeFdbLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter64
UNITS "database entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Filtering Database entries that
have been or would have been learned, but have been
discarded due to a lack of storage space in the
Filtering Database. If this counter is increasing, it
indicates that the Filtering Database is regularly
becoming full (a condition that has unpleasant
performance effects on the subnetwork). If this counter
has a significant value but is not presently increasing,
it indicates that the problem has been occurring but is
not persistent.
Discontinuities in the value of the counter can occur
at re-initialization of the management system."
::= { ieee8021QBridgeFdbEntry 4 }
ieee8021QBridgeFdbAgingTime OBJECT-TYPE
SYNTAX Integer32 (10..1000000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period in seconds for aging out
dynamically-learned forwarding information.
802.1D-1998 recommends a default of 300 seconds.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.7.1.2"
::= { ieee8021QBridgeFdbEntry 5 }
-- =============================================================
-- Multiple Filtering Databases for 802.1Q Transparent Devices
-- This table is an alternative to the ieee8021BridgeTpFdbTable,
-- previously defined for 802.1D devices that only support a
-- single Filtering Database.
-- =============================================================
ieee8021QBridgeTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information. This information is used by the
transparent bridging function in determining how to
propagate a received frame."
REFERENCE "12.7.1"
::= { ieee8021QBridgeTp 2 }
ieee8021QBridgeTpFdbEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeTpFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information."
INDEX { ieee8021QBridgeFdbComponentId,
ieee8021QBridgeFdbId,
ieee8021QBridgeTpFdbAddress }
::= { ieee8021QBridgeTpFdbTable 1 }
Ieee8021QBridgeTpFdbEntry ::=
SEQUENCE {
ieee8021QBridgeTpFdbAddress
MacAddress,
ieee8021QBridgeTpFdbPort
IEEE8021BridgePortNumberOrZero,
ieee8021QBridgeTpFdbStatus
INTEGER
}
ieee8021QBridgeTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unicast MAC address for which the device has
forwarding and/or filtering information."
::= { ieee8021QBridgeTpFdbEntry 1 }
ieee8021QBridgeTpFdbPort OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumberOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on
which a frame having a source address equal to the value
of the corresponding instance of ieee8021QBridgeTpFdbAddress has
been seen. A value of '0' indicates that the port
number has not been learned but that the device does
have some forwarding/filtering information about this
address (e.g., in the ieee8021QBridgeStaticUnicastTable).
Implementors are encouraged to assign the port value to
this object whenever it is learned, even for addresses
for which the corresponding value of ieee8021QBridgeTpFdbStatus is
not learned(3)."
::= { ieee8021QBridgeTpFdbEntry 2 }
ieee8021QBridgeTpFdbStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry. The meanings of the values
are:
other(1) - none of the following. This may include
the case where some other MIB object (not the
corresponding instance of ieee8021QBridgeTpFdbPort, nor an
entry in the ieee8021QBridgeStaticUnicastTable) is being
used to determine if and how frames addressed to
the value of the corresponding instance of
ieee8021QBridgeTpFdbAddress are being forwarded.
invalid(2) - this entry is no longer valid (e.g., it
was learned but has since aged out), but has not
yet been flushed from the table.
learned(3) - the value of the corresponding instance
of ieee8021QBridgeTpFdbPort was learned and is being used.
self(4) - the value of the corresponding instance of
ieee8021QBridgeTpFdbAddress represents one of the device's
addresses. The corresponding instance of
ieee8021QBridgeTpFdbPort indicates which of the device's
ports has this address.
mgmt(5) - the value of the corresponding instance of
ieee8021QBridgeTpFdbAddress is also the value of an
existing instance of ieee8021QBridgeStaticUnicastAddress."
::= { ieee8021QBridgeTpFdbEntry 3 }
-- =============================================================
-- Dynamic Group Registration Table
-- =============================================================
ieee8021QBridgeTpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeTpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for VLANs
configured into the bridge by (local or network)
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded."
REFERENCE "12.7.4"
::= { ieee8021QBridgeTp 3 }
ieee8021QBridgeTpGroupEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeTpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the bridge by
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address are allowed to be
forwarded. The subset of these ports learned dynamically
is also provided."
INDEX { ieee8021QBridgeVlanCurrentComponentId,
ieee8021QBridgeVlanIndex,
ieee8021QBridgeTpGroupAddress }
::= { ieee8021QBridgeTpGroupTable 1 }
Ieee8021QBridgeTpGroupEntry ::=
SEQUENCE {
ieee8021QBridgeTpGroupAddress
MacAddress,
ieee8021QBridgeTpGroupEgressPorts
PortList,
ieee8021QBridgeTpGroupLearnt
PortList
}
ieee8021QBridgeTpGroupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination Group MAC address in a frame to which
this entry's filtering information applies."
::= { ieee8021QBridgeTpGroupEntry 1 }
ieee8021QBridgeTpGroupEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports, in this VLAN, to which
frames destined for this Group MAC address are currently
being explicitly forwarded. This does not include ports
for which this address is only implicitly forwarded, in
the ieee8021QBridgeForwardAllPorts list."
::= { ieee8021QBridgeTpGroupEntry 2 }
ieee8021QBridgeTpGroupLearnt OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subset of ports in ieee8021QBridgeTpGroupEgressPorts that
were learned by MMRP or some other dynamic mechanism, in
this Filtering database."
::= { ieee8021QBridgeTpGroupEntry 3 }
-- =============================================================
-- Service Requirements subtree
-- =============================================================
ieee8021QBridgeForwardAllTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeForwardAllEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
all multicasts applies, configured statically by
management or dynamically by MMRP. An entry appears in
this table for all VLANs that are currently
instantiated."
REFERENCE "12.7.2, 12.7.7"
::= { ieee8021QBridgeTp 4 }
ieee8021QBridgeForwardAllEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeForwardAllEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information for a VLAN, specifying the set
of ports to which all multicasts should be forwarded,
configured statically by management or dynamically by
MMRP."
INDEX { ieee8021QBridgeVlanCurrentComponentId,
ieee8021QBridgeForwardAllVlanIndex }
::= { ieee8021QBridgeForwardAllTable 1 }
Ieee8021QBridgeForwardAllEntry ::=
SEQUENCE {
ieee8021QBridgeForwardAllVlanIndex
IEEE8021VlanIndexOrWildcard,
ieee8021QBridgeForwardAllPorts
PortList,
ieee8021QBridgeForwardAllStaticPorts
PortList,
ieee8021QBridgeForwardAllForbiddenPorts
PortList
}
ieee8021QBridgeForwardAllVlanIndex OBJECT-TYPE
SYNTAX IEEE8021VlanIndexOrWildcard
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { ieee8021QBridgeForwardAllEntry 1 }
ieee8021QBridgeForwardAllPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports in this VLAN to which all
multicast group-addressed frames are to be forwarded.
This includes ports for which this need has been
determined dynamically by MMRP, or configured statically
by management."
::= { ieee8021QBridgeForwardAllEntry 2 }
ieee8021QBridgeForwardAllStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports configured by management in this VLAN
to which all multicast group-addressed frames are to be
forwarded. Ports entered in this list will also appear
in the complete set shown by ieee8021QBridgeForwardAllPorts. This
value will be restored after the device is reset. This
only applies to ports that are members of the VLAN,
defined by ieee8021QBridgeVlanCurrentEgressPorts. A port may not
be added in this set if it is already a member of the
set of ports in ieee8021QBridgeForwardAllForbiddenPorts. The
default value is a string of ones of appropriate length,
to indicate the standard behaviour of using basic
filtering services, i.e., forward all multicasts to all
ports.
The value of this object MUST be retained across
reinitializations of the management system."
::= { ieee8021QBridgeForwardAllEntry 3 }
ieee8021QBridgeForwardAllForbiddenPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward All
Multicast Groups may not be dynamically registered by
MMRP. This value will be restored after the device is
reset. A port may not be added in this set if it is
already a member of the set of ports in
ieee8021QBridgeForwardAllStaticPorts. The default value is a
string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
::= { ieee8021QBridgeForwardAllEntry 4 }
ieee8021QBridgeForwardUnregisteredTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeForwardUnregisteredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which no
more specific forwarding information applies. This is
configured statically by management and determined
dynamically by MMRP. An entry appears in this table for
all VLANs that are currently instantiated."
REFERENCE "12.7.2, 12.7.7"
::= { ieee8021QBridgeTp 5 }
ieee8021QBridgeForwardUnregisteredEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeForwardUnregisteredEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Forwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynamically by MMRP."
INDEX { ieee8021QBridgeVlanCurrentComponentId,
ieee8021QBridgeForwardUnregisteredVlanIndex }
::= { ieee8021QBridgeForwardUnregisteredTable 1 }
Ieee8021QBridgeForwardUnregisteredEntry ::=
SEQUENCE {
ieee8021QBridgeForwardUnregisteredVlanIndex
IEEE8021VlanIndexOrWildcard,
ieee8021QBridgeForwardUnregisteredPorts
PortList,
ieee8021QBridgeForwardUnregisteredStaticPorts
PortList,
ieee8021QBridgeForwardUnregisteredForbiddenPorts
PortList
}
ieee8021QBridgeForwardUnregisteredVlanIndex OBJECT-TYPE
SYNTAX IEEE8021VlanIndexOrWildcard
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { ieee8021QBridgeForwardUnregisteredEntry 1 }
ieee8021QBridgeForwardUnregisteredPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The complete set of ports in this VLAN to which
multicast group-addressed frames for which there is no
more specific forwarding information will be forwarded.
This includes ports for which this need has been
determined dynamically by MMRP, or configured statically
by management."
::= { ieee8021QBridgeForwardUnregisteredEntry 2 }
ieee8021QBridgeForwardUnregisteredStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports configured by management, in this
VLAN, to which multicast group-addressed frames for
which there is no more specific forwarding information
are to be forwarded. Ports entered in this list will
also appear in the complete set shown by
ieee8021QBridgeForwardUnregisteredPorts. This value will be
restored after the device is reset. A port may not be
added in this set if it is already a member of the set
of ports in ieee8021QBridgeForwardUnregisteredForbiddenPorts. The
default value is a string of zeros of appropriate
length, although this has no effect with the default
value of ieee8021QBridgeForwardAllStaticPorts.
The value of this object MUST be retained across
reinitializations of the management system."
::= { ieee8021QBridgeForwardUnregisteredEntry 3 }
ieee8021QBridgeForwardUnregisteredForbiddenPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward
Unregistered Multicast Groups may not be dynamically
registered by MMRP. This value will be restored after
the device is reset. A port may not be added in this
set if it is already a member of the set of ports in
ieee8021QBridgeForwardUnregisteredStaticPorts. The default value
is a string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
::= { ieee8021QBridgeForwardUnregisteredEntry 4 }
-- =============================================================
-- The Static (Destination-Address Filtering) Database
-- =============================================================
ieee8021QBridgeStaticUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeStaticUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.
Entries are valid for unicast addresses only.
Two modes of operation are supported by this table. When
the receive port index is non-zero, this table is
supporting an 802.1D filtering database as specified in
14.7.6.1. If the receive port is zero, the
table is operating as specified in 802.1Q
8.8.1 and 12.7.7. An agent must at least
support the 802.1Q mode of operation."
REFERENCE "802.1D 7.9.1, 14.7.6.1;
802.1Q 12.7.7, 8.8.1"
::= { ieee8021QBridgeStatic 1 }
ieee8021QBridgeStaticUnicastEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeStaticUnicastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allowed to be forwarded."
INDEX {
ieee8021QBridgeStaticUnicastComponentId,
ieee8021QBridgeStaticUnicastVlanIndex,
ieee8021QBridgeStaticUnicastAddress,
ieee8021QBridgeStaticUnicastReceivePort
}
::= { ieee8021QBridgeStaticUnicastTable 1 }
Ieee8021QBridgeStaticUnicastEntry ::=
SEQUENCE {
ieee8021QBridgeStaticUnicastComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeStaticUnicastVlanIndex
IEEE8021VlanIndexOrWildcard,
ieee8021QBridgeStaticUnicastAddress
MacAddress,
ieee8021QBridgeStaticUnicastReceivePort
IEEE8021BridgePortNumberOrZero,
ieee8021QBridgeStaticUnicastStaticEgressPorts
PortList,
ieee8021QBridgeStaticUnicastForbiddenEgressPorts
PortList,
ieee8021QBridgeStaticUnicastStorageType
StorageType,
ieee8021QBridgeStaticUnicastRowStatus
RowStatus
}
ieee8021QBridgeStaticUnicastComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeStaticUnicastEntry 1 }
ieee8021QBridgeStaticUnicastVlanIndex OBJECT-TYPE
SYNTAX IEEE8021VlanIndexOrWildcard
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Vlan to which this entry applies."
::= { ieee8021QBridgeStaticUnicastEntry 2 }
ieee8021QBridgeStaticUnicastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a unicast address."
::= { ieee8021QBridgeStaticUnicastEntry 3 }
ieee8021QBridgeStaticUnicastReceivePort OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumberOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Either the value '0' or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. An
implementation is required to support the '0' value and
may optionally support non-zero values for this column."
::= { ieee8021QBridgeStaticUnicastEntry 4 }
ieee8021QBridgeStaticUnicastStaticEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific unicast address
must be forwarded, regardless of
any dynamic information, e.g., from MMRP. A port may not
be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticUnicastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length."
DEFVAL { ''H }
::= { ieee8021QBridgeStaticUnicastEntry 5 }
ieee8021QBridgeStaticUnicastForbiddenEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific unicast
MAC address must not be forwarded, regardless
of any dynamic information, e.g., from MMRP. A port may
not be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticUnicastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length."
DEFVAL { ''H }
::= { ieee8021QBridgeStaticUnicastEntry 6 }
ieee8021QBridgeStaticUnicastStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. If this object
has a value of permanent(4), then no other objects are
required to be able to be modified."
DEFVAL { nonVolatile }
::= { ieee8021QBridgeStaticUnicastEntry 7 }
ieee8021QBridgeStaticUnicastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry, and is used
to create/delete entries in the table.
An entry of this table may be set to active without setting
any other columns of the table. Also, other columns of this
table may be set while the value of this object is active(1)."
::= { ieee8021QBridgeStaticUnicastEntry 8 }
ieee8021QBridgeStaticMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeStaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded. A value of zero in this table (as the port
number from which frames with a specific destination
address are received) is used to specify all ports for
which there is no specific entry in this table for that
particular destination address. Entries are valid for
Multicast and Broadcast addresses only."
REFERENCE "12.7.7, 8.8.1"
::= { ieee8021QBridgeStatic 2 }
ieee8021QBridgeStaticMulticastEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeStaticMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port
for this VLAN and containing this Multicast or Broadcast
destination address are allowed to be forwarded."
INDEX {
ieee8021QBridgeVlanCurrentComponentId,
ieee8021QBridgeVlanIndex,
ieee8021QBridgeStaticMulticastAddress,
ieee8021QBridgeStaticMulticastReceivePort
}
::= { ieee8021QBridgeStaticMulticastTable 1 }
Ieee8021QBridgeStaticMulticastEntry ::=
SEQUENCE {
ieee8021QBridgeStaticMulticastAddress
MacAddress,
ieee8021QBridgeStaticMulticastReceivePort
IEEE8021BridgePortNumberOrZero,
ieee8021QBridgeStaticMulticastStaticEgressPorts
PortList,
ieee8021QBridgeStaticMulticastForbiddenEgressPorts
PortList,
ieee8021QBridgeStaticMulticastStorageType
StorageType,
ieee8021QBridgeStaticMulticastRowStatus
RowStatus
}
ieee8021QBridgeStaticMulticastAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination MAC address in a frame to which this
entry's filtering information applies. This object must
take the value of a Multicast or Broadcast address."
::= { ieee8021QBridgeStaticMulticastEntry 1 }
ieee8021QBridgeStaticMulticastReceivePort OBJECT-TYPE
SYNTAX IEEE8021BridgePortNumberOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Either the value '0' or the port number of the port
from which a frame must be received in order for this
entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the
device for which there is no other applicable entry. An
implementation is required to support the '0' value and
may optionally support non-zero values for this column."
::= { ieee8021QBridgeStaticMulticastEntry 2 }
ieee8021QBridgeStaticMulticastStaticEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information, e.g., from MMRP. A port may not
be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of
appropriate length."
DEFVAL { ''H }
::= { ieee8021QBridgeStaticMulticastEntry 3 }
ieee8021QBridgeStaticMulticastForbiddenEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless
of any dynamic information, e.g., from MMRP. A port may
not be added in this set if it is already a member of the
set of ports in ieee8021QBridgeStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of
appropriate length."
DEFVAL { ''H }
::= { ieee8021QBridgeStaticMulticastEntry 4 }
ieee8021QBridgeStaticMulticastStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row. If this object
has a value of permanent(4), then no other objects are
required to be able to be modified."
DEFVAL { nonVolatile }
::= { ieee8021QBridgeStaticMulticastEntry 5 }
ieee8021QBridgeStaticMulticastRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry, and is used
to create/delete entries in the table.
An entry of this table may be set to active without setting
any other columns of the table. Also, other columns of this
table may be set while the value of this object is active(1)."
::= { ieee8021QBridgeStaticMulticastEntry 6 }
-- =============================================================
-- The Current VLAN Database
-- =============================================================
ieee8021QBridgeVlanNumDeletes OBJECT-TYPE
SYNTAX Counter64
UNITS "vlan deletions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times a VLAN entry has been deleted from
the ieee8021QBridgeVlanCurrentTable (for any reason).
If an entry is deleted, then inserted, and then deleted,
this counter will be incremented by 2. Discontinuities
in this value can only occur at a reboot."
::= { ieee8021QBridgeVlan 1 }
ieee8021QBridgeVlanCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeVlanCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of MVRP requests received."
REFERENCE "12.10.2"
::= { ieee8021QBridgeVlan 2 }
ieee8021QBridgeVlanCurrentEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeVlanCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of MVRP requests received."
INDEX { ieee8021QBridgeVlanTimeMark,
ieee8021QBridgeVlanCurrentComponentId,
ieee8021QBridgeVlanIndex }
::= { ieee8021QBridgeVlanCurrentTable 1 }
Ieee8021QBridgeVlanCurrentEntry ::=
SEQUENCE {
ieee8021QBridgeVlanTimeMark
TimeFilter,
ieee8021QBridgeVlanCurrentComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeVlanIndex
IEEE8021VlanIndex,
ieee8021QBridgeVlanFdbId
Unsigned32,
ieee8021QBridgeVlanCurrentEgressPorts
PortList,
ieee8021QBridgeVlanCurrentUntaggedPorts
PortList,
ieee8021QBridgeVlanStatus
INTEGER,
ieee8021QBridgeVlanCreationTime
TimeTicks
}
ieee8021QBridgeVlanTimeMark OBJECT-TYPE
SYNTAX TimeFilter
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A TimeFilter for this entry. See the TimeFilter
textual convention to see how this works."
::= { ieee8021QBridgeVlanCurrentEntry 1 }
ieee8021QBridgeVlanCurrentComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeVlanCurrentEntry 2 }
ieee8021QBridgeVlanIndex OBJECT-TYPE
SYNTAX IEEE8021VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { ieee8021QBridgeVlanCurrentEntry 3 }
ieee8021QBridgeVlanFdbId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Filtering Database used by this VLAN. This is one
of the ieee8021QBridgeFdbId values in the ieee8021QBridgeFdbTable.
This value is allocated automatically by the device whenever
the VLAN is created: either dynamically by MVRP, or by
management, in ieee8021QBridgeVlanStaticTable. Allocation of this
value follows the learning constraints defined for this
VLAN in ieee8021QBridgeLearningConstraintsTable."
::= { ieee8021QBridgeVlanCurrentEntry 4 }
ieee8021QBridgeVlanCurrentEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports that are transmitting traffic for
this VLAN as either tagged or untagged frames."
REFERENCE "12.10.2.1"
::= { ieee8021QBridgeVlanCurrentEntry 5 }
ieee8021QBridgeVlanCurrentUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports that are transmitting traffic for
this VLAN as untagged frames."
REFERENCE "12.10.2.1"
::= { ieee8021QBridgeVlanCurrentEntry 6 }
ieee8021QBridgeVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
permanent(2),
dynamicMvrp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use, but the
conditions under which it will remain so differ
from the following values.
permanent(2) - this entry, corresponding to an entry
in ieee8021QBridgeVlanStaticTable, is currently in use and
will remain so after the next reset of the
device. The port lists for this entry include
ports from the equivalent ieee8021QBridgeVlanStaticTable
entry and ports learned dynamically.
dynamicMvrp(3) - this entry is currently in use
and will remain so until removed by MVRP. There
is no static entry for this VLAN, and it will be
removed when the last port leaves the VLAN."
::= { ieee8021QBridgeVlanCurrentEntry 7 }
ieee8021QBridgeVlanCreationTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this VLAN was created."
::= { ieee8021QBridgeVlanCurrentEntry 8 }
-- =============================================================
-- The Static VLAN Database
-- =============================================================
ieee8021QBridgeVlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are persistent and will
be restored after the device is reset."
REFERENCE "12.7.5"
::= { ieee8021QBridgeVlan 3 }
ieee8021QBridgeVlanStaticEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeVlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured into the
device by (local or network) management."
INDEX { ieee8021QBridgeVlanStaticComponentId,
ieee8021QBridgeVlanStaticVlanIndex }
::= { ieee8021QBridgeVlanStaticTable 1 }
Ieee8021QBridgeVlanStaticEntry ::=
SEQUENCE {
ieee8021QBridgeVlanStaticComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeVlanStaticVlanIndex
IEEE8021VlanIndex,
ieee8021QBridgeVlanStaticName
SnmpAdminString,
ieee8021QBridgeVlanStaticEgressPorts
PortList,
ieee8021QBridgeVlanForbiddenEgressPorts
PortList,
ieee8021QBridgeVlanStaticUntaggedPorts
PortList,
ieee8021QBridgeVlanStaticRowStatus
RowStatus
}
ieee8021QBridgeVlanStaticComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeVlanStaticEntry 1 }
ieee8021QBridgeVlanStaticVlanIndex OBJECT-TYPE
SYNTAX IEEE8021VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN-ID or other identifier referring to this VLAN."
::= { ieee8021QBridgeVlanStaticEntry 2 }
ieee8021QBridgeVlanStaticName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An administratively assigned string, which may be used
to identify the VLAN."
REFERENCE "12.10.2.1"
::= { ieee8021QBridgeVlanStaticEntry 3 }
ieee8021QBridgeVlanStaticEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports that are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port, per-VLAN
Registrar control for Registration Fixed for the
relevant MVRP state machine on each port. A port may
not be added in this set if it is already a member of
the set of ports in ieee8021QBridgeVlanForbiddenEgressPorts. The
default value of this object is a string of zeros of
appropriate length, indicating not fixed."
REFERENCE "12.7.7.3, 11.2.3.2.3"
::= { ieee8021QBridgeVlanStaticEntry 4 }
ieee8021QBridgeVlanForbiddenEgressPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports that are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port, per-VLAN Registrar
control for Registration Forbidden for the relevant MVRP
state machine on each port. A port may not be added in
this set if it is already a member of the set of ports
in ieee8021QBridgeVlanStaticEgressPorts. The default value of
this object is a string of zeros of appropriate length,
excluding all ports from the forbidden set."
REFERENCE "12.7.7.3, 11.2.3.2.3"
::= { ieee8021QBridgeVlanStaticEntry 5 }
ieee8021QBridgeVlanStaticUntaggedPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports that should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (ieee8021QBridgeVlanIndex = 1) is a string
of appropriate length including all ports. There is no
specified default for other VLANs. If a device agent cannot
support the set of ports being set, then it will reject the
set operation with an error. For example, a
manager might attempt to set more than one VLAN to be untagged
on egress where the device does not support this IEEE 802.1Q
option."
REFERENCE "12.10.2.1"
::= { ieee8021QBridgeVlanStaticEntry 6 }
ieee8021QBridgeVlanStaticRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this table
may be modified while the value of the corresponding instance
of this object is active(1)."
::= { ieee8021QBridgeVlanStaticEntry 7 }
ieee8021QBridgeNextFreeLocalVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeNextFreeLocalVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about the next free VLAN
value for a statically configured VLAN bridge."
::= { ieee8021QBridgeVlan 4 }
ieee8021QBridgeNextFreeLocalVlanEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeNextFreeLocalVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The next free VLAN value for a statically configured VLAN bridge"
INDEX { ieee8021QBridgeNextFreeLocalVlanComponentId }
::= { ieee8021QBridgeNextFreeLocalVlanTable 1 }
Ieee8021QBridgeNextFreeLocalVlanEntry ::=
SEQUENCE {
ieee8021QBridgeNextFreeLocalVlanComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeNextFreeLocalVlanIndex
Unsigned32
}
ieee8021QBridgeNextFreeLocalVlanComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeNextFreeLocalVlanEntry 1 }
ieee8021QBridgeNextFreeLocalVlanIndex OBJECT-TYPE
SYNTAX Unsigned32 (0|4096..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next available value for ieee8021QBridgeVlanIndex of a local
VLAN entry in ieee8021QBridgeVlanStaticTable. This will report
values >=4096 if a new Local VLAN may be created or else
the value 0 if this is not possible.
A row creation operation in this table for an entry with a local
VlanIndex value may fail if the current value of this object
is not used as the index. Even if the value read is used,
there is no guarantee that it will still be the valid index
when the create operation is attempted; another manager may
have already got in during the intervening time interval.
In this case, ieee8021QBridgeNextFreeLocalVlanIndex should be re-read
and the creation re-tried with the new value.
This value will automatically change when the current value is
used to create a new row."
::= { ieee8021QBridgeNextFreeLocalVlanEntry 2 }
-- =============================================================
-- The VLAN Port Configuration Table
-- =============================================================
ieee8021QBridgePortVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgePortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per-port control and status
information for VLAN configuration in the device."
REFERENCE "12.10.1"
::= { ieee8021QBridgeVlan 5 }
ieee8021QBridgePortVlanEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgePortVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information controlling VLAN configuration for a port
on the device. This is indexed by ieee8021BridgeBasePort."
AUGMENTS { ieee8021BridgeBasePortEntry }
::= { ieee8021QBridgePortVlanTable 1 }
Ieee8021QBridgePortVlanEntry ::=
SEQUENCE {
ieee8021QBridgePvid
IEEE8021VlanIndex,
ieee8021QBridgePortAcceptableFrameTypes
IEEE8021PortAcceptableFrameTypes,
ieee8021QBridgePortIngressFiltering
TruthValue,
ieee8021QBridgePortMvrpEnabledStatus
TruthValue,
ieee8021QBridgePortMvrpFailedRegistrations
Counter64,
ieee8021QBridgePortMvrpLastPduOrigin
MacAddress,
ieee8021QBridgePortRestrictedVlanRegistration
TruthValue
}
ieee8021QBridgePvid OBJECT-TYPE
SYNTAX IEEE8021VlanIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVID, the VLAN-ID assigned to untagged frames or
Priority-Tagged frames received on this port.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.10.1.1"
DEFVAL { 1 }
::= { ieee8021QBridgePortVlanEntry 1 }
ieee8021QBridgePortAcceptableFrameTypes OBJECT-TYPE
SYNTAX IEEE8021PortAcceptableFrameTypes
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is admitTagged(3), the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be accepted and assigned to a VID based on the
PVID and VID Set for this port.
This control does not affect VLAN-independent Bridge
Protocol Data Unit (BPDU) frames, such as MVRP and
Spanning Tree Protocol (STP). It does affect VLAN-
dependent BPDU frames, such as MMRP.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.10.1.3"
DEFVAL { admitAll }
::= { ieee8021QBridgePortVlanEntry 2 }
ieee8021QBridgePortIngressFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is true(1), the device will discard incoming
frames for VLANs that do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.
This control does not affect VLAN-independent BPDU
frames, such as MVRP and STP. It does affect VLAN-
dependent BPDU frames, such as MMRP.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "12.10.1.4"
DEFVAL { false }
::= { ieee8021QBridgePortVlanEntry 3 }
ieee8021QBridgePortMvrpEnabledStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of MVRP operation on this port. The value
true(1) indicates that MVRP is enabled on this port,
as long as ieee8021QBridgeMvrpEnabledStatus is also enabled
for this device. When false(2) but
ieee8021QBridgeMvrpEnabledStatus is still
enabled for the device, MVRP is disabled on this port:
any MVRP packets received will be silently discarded, and
no MVRP registrations will be propagated from other
ports. This object affects all MVRP Applicant and
Registrar state machines on this port. A transition
from false(2) to true(1) will cause a reset of all
MVRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { true }
::= { ieee8021QBridgePortVlanEntry 4 }
ieee8021QBridgePortMvrpFailedRegistrations OBJECT-TYPE
SYNTAX Counter64
UNITS "failed MVRP registrations"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of failed MVRP registrations, for any
reason, on this port.
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any)."
::= { ieee8021QBridgePortVlanEntry 5 }
ieee8021QBridgePortMvrpLastPduOrigin OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source MAC Address of the last MVRP message
received on this port."
::= { ieee8021QBridgePortVlanEntry 6 }
ieee8021QBridgePortRestrictedVlanRegistration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of Restricted VLAN Registration on this port.
If the value of this control is true(1), then creation
of a new dynamic VLAN entry is permitted only if there
is a Static VLAN Registration Entry for the VLAN concerned,
in which the Registrar Administrative Control value for
this port is Normal Registration.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE "11.2.3.2.3, 12.10.1.7."
DEFVAL { false }
::= { ieee8021QBridgePortVlanEntry 7 }
-- =============================================================
-- Per port VLAN Statistics Table
-- =============================================================
ieee8021QBridgePortVlanStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgePortVlanStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing per-port, per-VLAN statistics for
traffic received."
::= { ieee8021QBridgeVlan 6 }
ieee8021QBridgePortVlanStatisticsEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgePortVlanStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic statistics for a VLAN on an interface."
INDEX { ieee8021BridgeBasePortComponentId,
ieee8021BridgeBasePort,
ieee8021QBridgeVlanIndex }
::= { ieee8021QBridgePortVlanStatisticsTable 1 }
Ieee8021QBridgePortVlanStatisticsEntry ::=
SEQUENCE {
ieee8021QBridgeTpVlanPortInFrames
Counter64,
ieee8021QBridgeTpVlanPortOutFrames
Counter64,
ieee8021QBridgeTpVlanPortInDiscards
Counter64
}
ieee8021QBridgeTpVlanPortInFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN. Note that a frame received on this port is
counted by this object if and only if it is for a
protocol being processed by the local forwarding process
for this VLAN. This object includes received bridge
management frames classified as belonging to this VLAN
(e.g., MMRP, but not MVRP or STP.
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any)."
REFERENCE "12.6.1.1.3(a)"
::= { ieee8021QBridgePortVlanStatisticsEntry 1 }
ieee8021QBridgeTpVlanPortOutFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames transmitted by this port to
its segment from the local forwarding process for this
VLAN. This includes bridge management frames originated
by this device that are classified as belonging to this
VLAN (e.g., MMRP, but not MVRP or STP).
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any)."
REFERENCE "12.6.1.1.3(d)"
::= { ieee8021QBridgePortVlanStatisticsEntry 2 }
ieee8021QBridgeTpVlanPortInDiscards OBJECT-TYPE
SYNTAX Counter64
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames received by this port from
its segment that were classified as belonging to this
VLAN and that were discarded due to VLAN-related reasons.
Specifically, the IEEE 802.1Q counters for Discard
Inbound and Discard on Ingress Filtering.
Discontinuities in the value of the counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime object of the associated
interface (if any)."
REFERENCE "12.6.1.1.3"
::= { ieee8021QBridgePortVlanStatisticsEntry 3 }
-- =============================================================
-- The VLAN Learning Constraints Table
-- =============================================================
ieee8021QBridgeLearningConstraintsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeLearningConstraintsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing learning constraints for sets of
Shared and Independent VLANs. Entries in this table are
persistent and are preserved across reboots."
REFERENCE "12.10.3.1"
::= { ieee8021QBridgeVlan 8 }
ieee8021QBridgeLearningConstraintsEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeLearningConstraintsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A learning constraint defined for a VLAN."
INDEX { ieee8021QBridgeLearningConstraintsComponentId,
ieee8021QBridgeLearningConstraintsVlan,
ieee8021QBridgeLearningConstraintsSet }
::= { ieee8021QBridgeLearningConstraintsTable 1 }
Ieee8021QBridgeLearningConstraintsEntry ::=
SEQUENCE {
ieee8021QBridgeLearningConstraintsComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeLearningConstraintsVlan
IEEE8021VlanIndex,
ieee8021QBridgeLearningConstraintsSet
Integer32,
ieee8021QBridgeLearningConstraintsType
INTEGER,
ieee8021QBridgeLearningConstraintsStatus
RowStatus
}
ieee8021QBridgeLearningConstraintsComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeLearningConstraintsEntry 1 }
ieee8021QBridgeLearningConstraintsVlan OBJECT-TYPE
SYNTAX IEEE8021VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the row in ieee8021QBridgeVlanCurrentTable for the
VLAN constrained by this entry."
::= { ieee8021QBridgeLearningConstraintsEntry 2 }
ieee8021QBridgeLearningConstraintsSet OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identity of the constraint set to which
ieee8021QBridgeLearningConstraintsVlan belongs. These values may
be chosen by the management station."
::= { ieee8021QBridgeLearningConstraintsEntry 3 }
ieee8021QBridgeLearningConstraintsType OBJECT-TYPE
SYNTAX INTEGER {
independent(1),
shared(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of constraint this entry defines.
independent(1) - the VLAN, ieee8021QBridgeLearningConstraintsVlan,
uses a filtering database independent from all
other VLANs in the same set, defined by
ieee8021QBridgeLearningConstraintsSet.
shared(2) - the VLAN, ieee8021QBridgeLearningConstraintsVlan,
shares the same filtering database as all other VLANs
in the same set, defined by
ieee8021QBridgeLearningConstraintsSet."
::= { ieee8021QBridgeLearningConstraintsEntry 4 }
ieee8021QBridgeLearningConstraintsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry. Any object in an entry of this table
may be modified while the value of the corresponding instance
of this object is active(1)."
::= { ieee8021QBridgeLearningConstraintsEntry 5 }
ieee8021QBridgeLearningConstraintDefaultsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeLearningConstraintDefaultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing learning constraints for sets of
Shared and Independent VLANs."
REFERENCE "12.10.3.1"
::= { ieee8021QBridgeVlan 9 }
ieee8021QBridgeLearningConstraintDefaultsEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeLearningConstraintDefaultsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A learning constraint defined for a VLAN."
INDEX { ieee8021QBridgeLearningConstraintDefaultsComponentId }
::= { ieee8021QBridgeLearningConstraintDefaultsTable 1 }
Ieee8021QBridgeLearningConstraintDefaultsEntry ::=
SEQUENCE {
ieee8021QBridgeLearningConstraintDefaultsComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeLearningConstraintDefaultsSet
Integer32,
ieee8021QBridgeLearningConstraintDefaultsType
INTEGER
}
ieee8021QBridgeLearningConstraintDefaultsComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeLearningConstraintDefaultsEntry 1 }
ieee8021QBridgeLearningConstraintDefaultsSet OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The identity of the constraint set to which a VLAN
belongs, if there is not an explicit entry for that VLAN
in ieee8021QBridgeLearningConstraintsTable.
The value of this object MUST be retained across
reinitializations of the management system."
::= { ieee8021QBridgeLearningConstraintDefaultsEntry 2 }
ieee8021QBridgeLearningConstraintDefaultsType OBJECT-TYPE
SYNTAX INTEGER {
independent(1),
shared(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of constraint set to which a VLAN belongs, if
there is not an explicit entry for that VLAN in
ieee8021QBridgeLearningConstraintsTable. The types are as defined
for ieee8021QBridgeLearningConstraintsType.
The value of this object MUST be retained across
reinitializations of the management system."
::= { ieee8021QBridgeLearningConstraintDefaultsEntry 3 }
-- =============================================================
-- ieee8021QBridgeProtocol subtree
-- =============================================================
ieee8021QBridgeProtocolGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification.
Entries in this table must be persistent over power
up restart/reboot."
REFERENCE "12.10.1"
::= { ieee8021QBridgeProtocol 1 }
ieee8021QBridgeProtocolGroupEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeProtocolGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A mapping from a Protocol Template to a Protocol
Group Identifier."
REFERENCE "12.10.1.1.3 d)"
INDEX { ieee8021QBridgeProtocolGroupComponentId,
ieee8021QBridgeProtocolTemplateFrameType,
ieee8021QBridgeProtocolTemplateProtocolValue }
::= { ieee8021QBridgeProtocolGroupTable 1 }
Ieee8021QBridgeProtocolGroupEntry ::=
SEQUENCE {
ieee8021QBridgeProtocolGroupComponentId
IEEE8021PbbComponentIdentifier,
ieee8021QBridgeProtocolTemplateFrameType
INTEGER,
ieee8021QBridgeProtocolTemplateProtocolValue
OCTET STRING,
ieee8021QBridgeProtocolGroupId
Integer32,
ieee8021QBridgeProtocolGroupRowStatus
RowStatus
}
ieee8021QBridgeProtocolGroupComponentId OBJECT-TYPE
SYNTAX IEEE8021PbbComponentIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identifier is used to distinguish between the
multiple virtual bridge instances within a PBB. In simple
situations where there is only a single component the default
value is 1."
::= { ieee8021QBridgeProtocolGroupEntry 1 }
ieee8021QBridgeProtocolTemplateFrameType OBJECT-TYPE
SYNTAX INTEGER {
ethernet (1),
rfc1042 (2),
snap8021H (3),
snapOther (4),
llcOther (5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The data-link encapsulation format or the
'detagged_frame_type' in a Protocol Template."
REFERENCE "12.10.1.8"
::= { ieee8021QBridgeProtocolGroupEntry 2 }
ieee8021QBridgeProtocolTemplateProtocolValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2 | 5))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identification of the protocol above the data-link
layer in a Protocol Template. Depending on the
frame type, the octet string will have one of the
following values:
For 'ethernet', 'rfc1042' and 'snap8021H',
this is the 16-bit (2-octet) IEEE 802.3 Type Field.
For 'snapOther',
this is the 40-bit (5-octet) PID.
For 'llcOther',
this is the 2-octet IEEE 802.2 Link Service Access
Point (LSAP) pair: first octet for Destination Service
Access Point (DSAP) and second octet for Source Service
Access Point (SSAP)."
REFERENCE "12.10.1.8"
::= { ieee8021QBridgeProtocolGroupEntry 3 }
ieee8021QBridgeProtocolGroupId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents a group of protocols that are associated
together when assigning a VID to a frame."
REFERENCE "12.10.1.8"
::= { ieee8021QBridgeProtocolGroupEntry 4 }
ieee8021QBridgeProtocolGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { ieee8021QBridgeProtocolGroupEntry 5 }
ieee8021QBridgeProtocolPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeProtocolPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains VID sets used for
Port-and-Protocol-based VLAN Classification."
REFERENCE "12.10.1"
::= { ieee8021QBridgeProtocol 2 }
ieee8021QBridgeProtocolPortEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeProtocolPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A VID set for a port."
REFERENCE "12.10.1.1.3 c)"
INDEX { ieee8021BridgeBasePortComponentId,
ieee8021BridgeBasePort,
ieee8021QBridgeProtocolPortGroupId }
::= { ieee8021QBridgeProtocolPortTable 1 }
Ieee8021QBridgeProtocolPortEntry ::=
SEQUENCE {
ieee8021QBridgeProtocolPortGroupId
Integer32,
ieee8021QBridgeProtocolPortGroupVid
VlanId,
ieee8021QBridgeProtocolPortRowStatus
RowStatus
}
ieee8021QBridgeProtocolPortGroupId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Designates a group of protocols in the Protocol
Group Database."
REFERENCE "12.10.1.2"
::= { ieee8021QBridgeProtocolPortEntry 1 }
ieee8021QBridgeProtocolPortGroupVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VID associated with a group of protocols for
each port."
REFERENCE "12.10.1.2"
::= { ieee8021QBridgeProtocolPortEntry 2 }
ieee8021QBridgeProtocolPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { ieee8021QBridgeProtocolPortEntry 3 }
-- =============================================================
-- ieee8021QBridgeVIDX subtree
--
-- =============================================================
ieee8021QBridgeVIDXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeVIDXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VID Translation
Table defined in 12.10.1.8 and 6.9. The Bridge VID
Translation Table is used to implement a mapping between a
local VID, and a relay VID, used by the filtering and
forwarding process. Each row in this table is indexed by
component, port, and local VID value and a value to be used
for the specified VID as specified in (6.9). Entries in
this table must be persistent over power up restart/reboot."
REFERENCE "12.10.1.8 "
::= { ieee8021QBridgeVIDX 1 }
ieee8021QBridgeVIDXEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeVIDXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for the S-VID translation table which includes
both the Local and Relay S-VIDs."
INDEX { ieee8021BridgeBasePortComponentId,
ieee8021BridgeBasePort,
ieee8021QBridgeVIDXLocalVid }
::= { ieee8021QBridgeVIDXTable 1 }
Ieee8021QBridgeVIDXEntry ::=
SEQUENCE {
ieee8021QBridgeVIDXLocalVid VlanId,
ieee8021QBridgeVIDXRelayVid VlanId,
ieee8021QBridgeVIDXRowStatus RowStatus
}
ieee8021QBridgeVIDXLocalVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Local VID after translation received at the ISS or EISS."
REFERENCE "12.10.1.8.1, 12.10.1.8.2 "
::= { ieee8021QBridgeVIDXEntry 1 }
ieee8021QBridgeVIDXRelayVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Relay VID received before translation received at ISS or EISS."
REFERENCE "12.10.1.8.1, 12.10.1.8.2 "
::= { ieee8021QBridgeVIDXEntry 2 }
ieee8021QBridgeVIDXRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the status of an entry in this table,
and is used to create/delete entries. It is an
implementation specific decision as to whether
any column in this table may be set while the
corresponding instance of this object is valid(1)."
REFERENCE "12.10.1.8.1, 12.10.1.8.2 "
::= { ieee8021QBridgeVIDXEntry 3 }
-- ===========================================================
-- ieee8021QBridgeEgressVidXTable:
-- ===========================================================
ieee8021QBridgeEgressVidXTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ieee8021QBridgeEgressVidXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the VID Translation
Table defined in 12.10.1.9 and 6.9. The Bridge VID
Egress Translation Table is used to implement a mapping between a
relay VID, and a local VID, used by the filtering and
forwarding process. Each row in this table is indexed by
component, port, and relay VID value and a value to be used
for the specified local VID as specified in (6.9). Entries in
this table must be persistent over power up restart/reboot."
REFERENCE "12.10.1.9, 6.9"
::= { ieee8021QBridgeVIDX 2 }
ieee8021QBridgeEgressVidXEntry OBJECT-TYPE
SYNTAX Ieee8021QBridgeEgressVidXEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for the Egress VID translation table which includes
both the relay and local IDs between which the PNP or CNP
translates."
INDEX { ieee8021BridgeBaseEgressPortComponentId,
ieee8021BridgeEgressBasePort,
ieee8021QBridgeEgressVidXRelayVid }
::= { ieee8021QBridgeEgressVidXTable 1 }
Ieee8021QBridgeEgressVidXEntry ::=
SEQUENCE {
ieee8021QBridgeEgressVidXRelayVid VlanId,
ieee8021QBridgeEgressVidXLocalVid VlanId,
ieee8021QBridgeEgressVidXRowStatus RowStatus
}
ieee8021QBridgeEgressVidXRelayVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Relay VID after translation transmitted to the
ISS or EISS."
REFERENCE "12.10.1.9.1, 12.10.1.9.2 "
::= { ieee8021QBridgeEgressVidXEntry 1 }
ieee8021QBridgeEgressVidXLocalVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Local VID before translation transmitted to the
ISS or EISS."
REFERENCE "12.10.1.9.1, 12.10.1.9.2 "
::= { ieee8021QBridgeEgressVidXEntry 2 }
ieee8021QBridgeEgressVidXRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This indicates the status of an entry in this table,
and is used to create/delete entries. It is an
implementation specific decision as to whether
any column in this table may be set while the
corresponding instance of this object is valid(1)."
REFERENCE "12.10.1.9.1, 12.10.1.9.2 "
::= { ieee8021QBridgeEgressVidXEntry 3 }
-- =============================================================
-- IEEE 802.1Q MIB - Conformance Information
-- =============================================================
ieee8021QBridgeConformance
OBJECT IDENTIFIER ::= { ieee8021QBridgeMib 2 }
ieee8021QBridgeGroups
OBJECT IDENTIFIER ::= { ieee8021QBridgeConformance 1 }
ieee8021QBridgeCompliances
OBJECT IDENTIFIER ::= { ieee8021QBridgeConformance 2 }
-- =============================================================
-- units of conformance
-- =============================================================
ieee8021QBridgeBaseGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeVlanVersionNumber,
ieee8021QBridgeMaxVlanId,
ieee8021QBridgeMaxSupportedVlans,
ieee8021QBridgeNumVlans,
ieee8021QBridgeMvrpEnabledStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing device-level control
and status information for the Virtual LAN bridge
services."
::= { ieee8021QBridgeGroups 1 }
ieee8021QBridgeFdbUnicastGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeFdbDynamicCount,
ieee8021QBridgeFdbLearnedEntryDiscards,
ieee8021QBridgeFdbAgingTime,
ieee8021QBridgeTpFdbPort,
ieee8021QBridgeTpFdbStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about all
unicast addresses, learned dynamically or statically
configured by management, in each Filtering Database."
::= { ieee8021QBridgeGroups 2 }
ieee8021QBridgeFdbMulticastGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeTpGroupEgressPorts,
ieee8021QBridgeTpGroupLearnt
}
STATUS current
DESCRIPTION
"A collection of objects providing information about all
multicast addresses, learned dynamically or statically
configured by management, in each Filtering Database."
::= { ieee8021QBridgeGroups 3 }
ieee8021QBridgeServiceRequirementsGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeForwardAllPorts,
ieee8021QBridgeForwardAllStaticPorts,
ieee8021QBridgeForwardAllForbiddenPorts,
ieee8021QBridgeForwardUnregisteredPorts,
ieee8021QBridgeForwardUnregisteredStaticPorts,
ieee8021QBridgeForwardUnregisteredForbiddenPorts
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
service requirements, learned dynamically or statically
configured by management, in each Filtering Database."
::= { ieee8021QBridgeGroups 4 }
ieee8021QBridgeFdbStaticGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeStaticUnicastStaticEgressPorts,
ieee8021QBridgeStaticUnicastForbiddenEgressPorts,
ieee8021QBridgeStaticUnicastStorageType,
ieee8021QBridgeStaticUnicastRowStatus,
ieee8021QBridgeStaticMulticastStaticEgressPorts,
ieee8021QBridgeStaticMulticastForbiddenEgressPorts,
ieee8021QBridgeStaticMulticastStorageType,
ieee8021QBridgeStaticMulticastRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
unicast and multicast addresses statically configured by
management, in each Filtering Database or VLAN."
::= { ieee8021QBridgeGroups 5 }
ieee8021QBridgeVlanGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeVlanNumDeletes,
ieee8021QBridgeVlanFdbId,
ieee8021QBridgeVlanCurrentEgressPorts,
ieee8021QBridgeVlanCurrentUntaggedPorts,
ieee8021QBridgeVlanStatus,
ieee8021QBridgeVlanCreationTime
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
all VLANs currently configured on this device."
::= { ieee8021QBridgeGroups 6 }
ieee8021QBridgeVlanStaticGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeVlanStaticName,
ieee8021QBridgeVlanStaticEgressPorts,
ieee8021QBridgeVlanForbiddenEgressPorts,
ieee8021QBridgeVlanStaticUntaggedPorts,
ieee8021QBridgeVlanStaticRowStatus,
ieee8021QBridgeNextFreeLocalVlanIndex
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
VLANs statically configured by management."
::= { ieee8021QBridgeGroups 7 }
ieee8021QBridgeVlanStatisticsGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeTpVlanPortInFrames,
ieee8021QBridgeTpVlanPortOutFrames,
ieee8021QBridgeTpVlanPortInDiscards
}
STATUS current
DESCRIPTION
"A collection of objects providing per-port packet
statistics for all VLANs currently configured on this
device."
::= { ieee8021QBridgeGroups 8 }
ieee8021QBridgeLearningConstraintsGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeLearningConstraintsType,
ieee8021QBridgeLearningConstraintsStatus
}
STATUS current
DESCRIPTION
"A collection of objects defining the Filtering Database
constraints all VLANs have with each other."
::= { ieee8021QBridgeGroups 9 }
ieee8021QBridgeLearningConstraintDefaultGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeLearningConstraintDefaultsSet,
ieee8021QBridgeLearningConstraintDefaultsType
}
STATUS current
DESCRIPTION
"A collection of objects defining the default Filtering
Database constraints for VLANs that have no specific
constraints defined."
::= { ieee8021QBridgeGroups 10 }
ieee8021QBridgeClassificationDeviceGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeProtocolGroupId,
ieee8021QBridgeProtocolGroupRowStatus
}
STATUS current
DESCRIPTION
"VLAN classification information for the bridge."
::= { ieee8021QBridgeGroups 11 }
ieee8021QBridgeClassificationPortGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeProtocolPortGroupVid,
ieee8021QBridgeProtocolPortRowStatus
}
STATUS current
DESCRIPTION
"VLAN classification information for individual ports."
::= { ieee8021QBridgeGroups 12 }
ieee8021QBridgePortGroup2 OBJECT-GROUP
OBJECTS {
ieee8021QBridgePvid,
ieee8021QBridgePortAcceptableFrameTypes,
ieee8021QBridgePortIngressFiltering,
ieee8021QBridgePortMvrpEnabledStatus,
ieee8021QBridgePortMvrpFailedRegistrations,
ieee8021QBridgePortMvrpLastPduOrigin,
ieee8021QBridgePortRestrictedVlanRegistration
}
STATUS current
DESCRIPTION
"A collection of objects providing port-level VLAN
control and status information for all ports."
::= { ieee8021QBridgeGroups 13 }
ieee8021QBridgeCVlanPortGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeCVlanPortRowStatus
}
STATUS current
DESCRIPTION
"Objects used to create/delete customer VLAN ports."
::= { ieee8021QBridgeGroups 14 }
ieee8021QBridgeVIDXGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeVIDXRelayVid,
ieee8021QBridgeVIDXRowStatus
}
STATUS current
DESCRIPTION
"Ingress or Ingress/Egress VID translation for
individual ports."
::= { ieee8021QBridgeGroups 15 }
ieee8021QBridgeEgressVIDXGroup OBJECT-GROUP
OBJECTS {
ieee8021QBridgeEgressVidXLocalVid,
ieee8021QBridgeEgressVidXRowStatus
}
STATUS current
DESCRIPTION
"Egress VID translation for individual ports."
::= { ieee8021QBridgeGroups 16 }
-- =============================================================
-- compliance statements
-- =============================================================
ieee8021QBridgeCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device support of Virtual
LAN Bridge services."
MODULE
MANDATORY-GROUPS {
ieee8021QBridgeBaseGroup,
ieee8021QBridgeVlanGroup,
ieee8021QBridgeVlanStaticGroup,
ieee8021QBridgePortGroup2
}
GROUP ieee8021QBridgeFdbUnicastGroup
DESCRIPTION
"This group is mandatory for bridges that implement
802.1Q transparent bridging."
GROUP ieee8021QBridgeFdbMulticastGroup
DESCRIPTION
"This group is mandatory for bridges that implement
802.1Q transparent bridging."
GROUP ieee8021QBridgeServiceRequirementsGroup
DESCRIPTION
"This group is mandatory for bridges that implement
extended filtering services. All objects must be
read-write if extended-filtering services are
enabled."
GROUP ieee8021QBridgeFdbStaticGroup
DESCRIPTION
"This group is optional."
GROUP ieee8021QBridgeVlanStatisticsGroup
DESCRIPTION
"This group is optional as there may be significant
implementation cost associated with its support."
GROUP ieee8021QBridgeLearningConstraintsGroup
DESCRIPTION
"This group is mandatory for devices implementing
both Independent VLAN Learning (IVL) and Shared
VLAN Learning (SVL) modes of operation of the
filtering database, as defined by IEEE 802.1Q."
GROUP ieee8021QBridgeLearningConstraintDefaultGroup
DESCRIPTION
"This group is mandatory for devices implementing
both Independent VLAN Learning (IVL) and Shared
VLAN Learning (SVL) modes of operation of the
filtering database, as defined by IEEE 802.1Q."
GROUP ieee8021QBridgeClassificationDeviceGroup
DESCRIPTION
"This group is mandatory ONLY for devices implementing
VLAN Classification as specified in IEEE 802.1v."
GROUP ieee8021QBridgeClassificationPortGroup
DESCRIPTION
"This group is mandatory ONLY for devices implementing
VLAN Classification as specified in IEEE 802.1v."
GROUP ieee8021QBridgeCVlanPortGroup
DESCRIPTION
"This group is mandatory ONLY for devices supporting
creation/deletion of customer VLAN ports."
GROUP ieee8021QBridgeVIDXGroup
DESCRIPTION
"This group is mandatory ONLY for devices supporting
VID translation of customer and/or provider VLAN ports."
GROUP ieee8021QBridgeEgressVIDXGroup
DESCRIPTION
"This group is mandatory ONLY for devices supporting
separate Ingress and Egress VID translation of
of customer and provider VLAN ports."
OBJECT ieee8021QBridgePortAcceptableFrameTypes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required as this is an optional
capability in IEEE 802.1Q."
OBJECT ieee8021QBridgePortIngressFiltering
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required as this is an optional
capability in IEEE 802.1Q."
OBJECT ieee8021QBridgeLearningConstraintDefaultsSet
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required as this is an optional
capability in IEEE 802.1Q."
OBJECT ieee8021QBridgeLearningConstraintDefaultsType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required as this is an optional
capability in IEEE 802.1Q."
OBJECT ieee8021QBridgeProtocolGroupId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required as this is an optional
capability in IEEE 802.1v."
OBJECT ieee8021QBridgeProtocolGroupRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required as this is an optional
capability in IEEE 802.1v."
::= { ieee8021QBridgeCompliances 1 }
END
Reference in New Issue Copy Permalink