mibs/MIBS/MEF-UNI-EVC-MIB

MEF-UNI-EVC-MIB DEFINITIONS ::= BEGIN
  IMPORTS
    NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises,
    Counter32, Counter64
             FROM SNMPv2-SMI            -- RFC 2578
    RowStatus, MacAddress, DateAndTime, TEXTUAL-CONVENTION, DisplayString
             FROM SNMPv2-TC             -- RFC 2579
    OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
             FROM SNMPv2-CONF           -- RFC 2580
    ifIndex
             FROM IF-MIB                -- [RFC2863]
    EntityAdminState, EntityOperState
             FROM ENTITY-STATE-TC-MIB   -- RFC 4268
    VlanId
             FROM Q-BRIDGE-MIB          -- [RFC4363]
    IEEE8021PriorityValue
             FROM IEEE8021-TC-MIB;      -- IEEE 802.1ap

mefUniEvcMib MODULE-IDENTITY
    LAST-UPDATED    "201301251200Z" -- January 25, 2013
    ORGANIZATION    "Metro Ethernet Forum"
    CONTACT-INFO
       "Web URL: http://metroethernetforum.org/
        E-mail:  mibs@metroethernetforum.org
        Postal:  Metro Ethernet Forum
                 6033 W. Century Boulevard, Suite 1107
                 Los Angeles, CA 90045
                 U.S.A.
        Phone:   +1 310-642-2800
        Fax:     +1 310-642-2808"
    DESCRIPTION
            "This MIB module contains the management objects for the
            management of User Network Interfaces (UNIs) and Ethernet
            Virtual Connections (EVCs)

            Copyright 2013 Metro Ethernet Forum
            All rights reserved.

    ****************************************************************************
    Reference Overview

    A number of base documents have been used to create this MIB. The following
    are the abbreviations for the baseline documents:

    [MEF6.1] refers to MEF 6.1 'Ethernet Services Definitions - Phase 2',
        April 2008
    [MEF 6.1.1] refers to MEF 6.1.1 'Layer 2 Control Protocol Handling Amendment
       to MEF 6.1', January 2012
    [MEF 7.2] refers to MEF 7.2 'Carrier Ethernet Management Information Model',
        January 2013
    [MEF 10.2] refers to MEF 10.2 'Ethernet Services Attributes Phase 2',
        October 2009
    [MEF 26.1] refers to MEF 26.1 'External Network Network Interface (ENNI) -
        Phase 2', January 2012
    [Q.840.1] refers to 'ITU-T Requirements and analysis for NMS-EMS
        management interface of Ethernet over Transport and Metro Ethernet
        Network (EoT/MEN)', March 2007
    ****************************************************************************
           "
    REVISION        "201301251200Z" -- January 25, 2013
    DESCRIPTION
            "Initial Version."
    ::= { enterprises mef(15007) mefService(2) 2 }


-- *****************************************************************************
-- Object definitions in the Service MIB Module
-- *****************************************************************************
mefServiceNotifications      OBJECT IDENTIFIER ::= { mefUniEvcMib 0 }
mefServiceObjects            OBJECT IDENTIFIER ::= { mefUniEvcMib 1 }
mefServiceMibConformance     OBJECT IDENTIFIER ::= { mefUniEvcMib 2 }

-- *****************************************************************************
-- Groups in the Service MIB Module
-- *****************************************************************************
mefServiceInterfaceAttributes  OBJECT IDENTIFIER ::= { mefServiceObjects 1 }
mefServiceUniAttributes        OBJECT IDENTIFIER ::= { mefServiceObjects 2 }
mefServiceEvcAttributes        OBJECT IDENTIFIER ::= { mefServiceObjects 3 }

mefServiceBwpAttributes        OBJECT IDENTIFIER ::= { mefServiceObjects 4 }
mefServiceCosAttributes        OBJECT IDENTIFIER ::= { mefServiceObjects 5 }
mefServiceL2cpAttributes       OBJECT IDENTIFIER ::= { mefServiceObjects 6 }
mefServiceNotificationCfg      OBJECT IDENTIFIER ::= { mefServiceObjects 7 }
mefServiceNotificationObj      OBJECT IDENTIFIER ::= { mefServiceObjects 8 }


-- *****************************************************************************
-- Ethernet Service Textual Conventions
-- *****************************************************************************

MefServicePreservationType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Configures the EVC preservation attributes.

        preserve(1)           The type of service is preserved, either 
                              CE-VLAN ID or CE-VLAN CoS as indicated by
                              the specific object.
        noPreserve(2)         The type of service is not preserved, either 
                              CE-VLAN ID or CE-VLAN CoS as indicated by
                              the specific object.
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    SYNTAX      INTEGER {
        preserve              (1),
        noPreserve            (2)
    }


MefServiceDeliveryType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
       "A MEF service can have one of three different delivery types:

        discard(1)            Service Frames are discarded
        unconditional(2)      Service Frames are unconditionally
                              delivered no matter the content of the 
                              Service Frame. An example of this is
                              a Point-to-Point EVC
        conditional(3)        Service Frame are conditionally 
                              delivered to the destination UNI. The
                              condition is specified, for example via a
                              bandwidth profile or unicast MAC address 
                              learning.
       " 
    REFERENCE
       "[MEF 6.1] 6.0"
    SYNTAX      INTEGER {
        discard               (1),
        unconditional         (2),
        conditional           (3)
    }

MefServiceInterfaceType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
       "A MEF Interface can be one of several types:

         bUni1d1(0)    UNI Type 1.1
         bUni1d2(1)    UNI Type 1.2
         bUni2d1(2)    UNI Type 2.1
         bUni2d2(3)    UNI Type 2.2
         bEnni(4)      ENNI
         bEnniVuni(5)  VUNI on an ENNI
       " 
    REFERENCE
       "[MEF 6.1] 6.0"
    SYNTAX      BITS {
                     bUni1d1(0),
                     bUni1d2(1),
                     bUni2d1(2),
                     bUni2d2(3),
                     bEnni(4),
                     bEnniVuni(5)
                }

MefServiceListType ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "255t"
       STATUS       current
       DESCRIPTION
           "An octet string containing a list of item values.

            An item value is an arbitrary string of octets from
            ASCII character 0x21 - 0x7E, but may not contain 
            a delimiter character. Delimiter characters are 
            defined to be one of the following:

                -  An ASCII comma character (0x2C)
                -  An ASCII colon character (0x3A)

            Delimiter characters are used to separate item values
            in a item list.  Only a single delimiter character may
            occur between two item values.  A item value may not
            have a zero length.  These constraints imply certain
            restrictions on the contents of this object:

                - There cannot be a leading or trailing delimiter
                  character.

                - There cannot be multiple adjacent delimiter
                  characters.

            The 'comma' delimiter separates individual items or a
            sequence of items. The 'colon' delimiter indicates a range
            of items from the first item before the colon through the
            last item after the colon. Individual ranges in the same
            item list need to be separated by a 'comma'.

            Some examples of valid item lists are:

                - ''            -- an empty list
                - '1234'        -- list of one item
                - '10,11,12'    -- list of several items
                - '10:20'       -- a list containing all the valid values from
                                   10 through 20

            Note that although an item value may not have a length of
            zero, an empty string is still valid.  This indicates
            an empty list (i.e. there are no tag values in the list).

            The use of the item list is to select one or more items at
            one time with a single object instead of having separate row
            entries in a table for each individual item.
           "
       SYNTAX       OCTET STRING (SIZE (0..255))


-- *****************************************************************************
-- Ethernet Service Interface Configuration
-- *****************************************************************************

mefServiceInterfaceCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceInterfaceCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the local interface configuration table for an
        MEF Ethernet compliant Network Element (NE). The primary purpose of 
        this table is to provide configuration of the interface for a Metro 
        Ethernet NE (ME-NE). Rows are automatically created by the SNMP
        Agent in the table based upon the MEF compliant interfaces that a ME-NE
        contains based upon the listed defaults. A SNMP Manager can modify
        values of each of the objects in the row. 

        This table may be sparsely populated based upon the number of ME-NE 
        interfaces that the device supports.

        Rows in this table are accessed by the IF-MIB interface object ifIndex.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot.
       "
    REFERENCE
       "[MEF 6.1], [MEF 7.2], [MEF 10.2], [Q.840.1]"
    ::= { mefServiceInterfaceAttributes 1 }

mefServiceInterfaceCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceInterfaceCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceInterfaceCfgTable."
    INDEX { ifIndex }
    ::= { mefServiceInterfaceCfgTable 1 }

MefServiceInterfaceCfgEntry ::= SEQUENCE {
      mefServiceInterfaceCfgType                 MefServiceInterfaceType,
      mefServiceInterfaceCfgIdentifier           DisplayString,
      mefServiceInterfaceCfgFrameFormat          INTEGER,
      mefServiceInterfaceCfgIngressBwpGrpIndex   Unsigned32,
      mefServiceInterfaceCfgEgressBwpGrpIndex    Unsigned32,
      mefServiceInterfaceCfgL2cpGrpIndex         Unsigned32
    }

mefServiceInterfaceCfgType OBJECT-TYPE
    SYNTAX      MefServiceInterfaceType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the configured interface type. One
        bit in the vector can be set at one time based upon the
        possible values indicated by mefServiceInterfaceStatusType.
       "
    REFERENCE
       "[MEF 6.1] 6.0; [MEF 7.2] 6.2.1.1, 6.2.1.2, 6.2.1.3"
    DEFVAL { {bUni1d1} }
 ::= { mefServiceInterfaceCfgEntry 1 }

mefServiceInterfaceCfgIdentifier OBJECT-TYPE
    SYNTAX      DisplayString 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the interface identifier and is an arbitrary 
        text string that is used to identify an interface. Unique string
        values are chosen to uniquely identify an interface.

        This object is used to add an identifier to a physical port. The
        mefServiceUniCfgIdentifier can be used to add a separate identifier
        that is associated with the service interface name.

        Octet values of 0x00 through 0x1f are illegal.

        MEF 26.1 restricts the maximum size identifiers to 45 octets.
       "
    REFERENCE
       "[MEF 7.2] 6.2.1.4"
    DEFVAL { "" }
    ::= { mefServiceInterfaceCfgEntry 2 }

mefServiceInterfaceCfgFrameFormat OBJECT-TYPE
    SYNTAX      INTEGER {
        noTag       (1),
        ctag        (2),
        stag        (3),
        stagCtag    (4)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the interface frame format type that the
        interface can recognize.

        noTag(1)        indicates that all data on the interface is
                        as untagged data
        ctag(2)         indicates that tagged data is associated with
                        CE-VLAN ID or a C-TAG
        stag(3)         indicates that tagged data is associated with
                        a provider tag or S-TAG
        stagCtag(4)     indicates that service traffic identified with
                        both an S-TAG (outer tag) and a C-TAG (inner tag)
       "
    REFERENCE
       "[MEF 6.1] 6.0"
    DEFVAL { noTag }
    ::= { mefServiceInterfaceCfgEntry 3 }

mefServiceInterfaceCfgIngressBwpGrpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index number of the ingress bandwidth profile group
        associated with the current interface. A value of 0 indicates that no
        interface ingress bandwidth profile group is associated with the 
        interface.

        This index indicates the specific bandwidth profile group previously 
        configured via mefServiceBwpGrpCfgTable and mefServiceBwpCfgTable 
        using this value for mefServiceBwpGrpCfgIndex. There may be multiple 
        entries in mefServiceBwpCfgTable using this index, each containing
        bandwidth parameters for a different Class of Service Identifier.
       "
    REFERENCE
       "[MEF 6.1] 6.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceInterfaceCfgEntry 4 }

mefServiceInterfaceCfgEgressBwpGrpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index number of the egress bandwidth profile group
        associated with the current interface. A value of 0 indicates that no
        interface egress bandwidth profile group is associated with the 
        interface.

        This index indicates the specific bandwidth profile group previously 
        configured via mefServiceBwpGrpCfgTable and mefServiceBwpCfgTable 
        using this value for mefServiceBwpGrpCfgIndex. There may be multiple 
        entries in mefServiceBwpCfgTable using this index, each containing
        bandwidth parameters for a different Class of Service Identifier.
       "
    REFERENCE
       "[MEF 6.1] 6.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceInterfaceCfgEntry 5 }

mefServiceInterfaceCfgL2cpGrpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index of the L2CP profile group
        (mefServiceL2cpGrpCfgIndex) associated with the current interface. A 
        value of 0 indicates that no interface L2CP profile group is associated
        with the interface.

        This index indicates the L2CP profile group previously configured via
        mefServiceL2cpGrpCfgTable and mefServiceL2cpCfgTable using the value 
        of the mefServiceL2cpGrpCfgIndex. There may be multiple entries in 
        mefServiceL2cpCfgTable using this index, each containing
        parameters for a different L2CP protocol.
       "
    REFERENCE
       "[MEF 6.1] 6.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceInterfaceCfgEntry 9 }


-- *****************************************************************************
-- Ethernet Service Interface Status
-- *****************************************************************************

mefServiceInterfaceStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceInterfaceStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the local interface status table for an
        MEF Ethernet compliant NE. The primary purpose of this table is to
        provide status information of the interface for a ME-NE. Rows are
        automatically created in the table based upon the interfaces that a MEF
        NE contains. This tables contains the same rows as the 
        mefServiceInterfaceCfgTable. A SNMP Manager can access objects in each
        of the rows in the table.

        Rows in this table are accessed by the IF-MIB interface object ifIndex.

        Rows in this table are persistent (non-volatile) upon reboot, but the
        values of the objects in a row are not persistent.
       "
    REFERENCE
       "[MEF 6.1], [MEF 7.2], [MEF 10.2], [Q.840.1]"
    ::= { mefServiceInterfaceAttributes 2 }

mefServiceInterfaceStatusEntry OBJECT-TYPE
    SYNTAX      MefServiceInterfaceStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceInterfaceStatusTable."
    INDEX { ifIndex }
    ::= { mefServiceInterfaceStatusTable 1 }

MefServiceInterfaceStatusEntry ::= SEQUENCE {
      mefServiceInterfaceStatusType               MefServiceInterfaceType,
      mefServiceInterfaceStatusMaxVc              Unsigned32,
      mefServiceInterfaceStatusMaxEndPointPerVc   Unsigned32
    }

mefServiceInterfaceStatusType OBJECT-TYPE
    SYNTAX      MefServiceInterfaceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is a vector of bits that indicates the possible
        interface types that an interface can be configured to. An interface,
        for instance, can be configured to be a UNI type 1 or 2, or an ENNI.

        All the possible capabilities of an interface are indicated, one bit
        per possible type. At least one bit must be set for MEF compliant NEs.
       "
    REFERENCE
       "[MEF 6.1] 6.0"
    ::= { mefServiceInterfaceStatusEntry 1 }

mefServiceInterfaceStatusMaxVc OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4095)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the maximum number of virtual channels that the
        interface can support. A virtual connection can be an Ethernet Virtual 
        Connection (EVC) or an Operator Virtual Connection (OVC) depending upon
        the type of interface that is selected.  
       "
    REFERENCE
       "[MEF 6.1] 6.0; [MEF 7.2] 6.2.1.2"
    ::= { mefServiceInterfaceStatusEntry 2 }

mefServiceInterfaceStatusMaxEndPointPerVc OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the interface maximum number of end points per
        virtual channel. It can be used to indicate the maximum number of OVC
        end points per OVC. It has no current applicability for EVCs. 
       "
    REFERENCE
       "[MEF 26.1]"
    ::= { mefServiceInterfaceStatusEntry 3 }


-- *****************************************************************************
-- Ethernet Service Interface Statistics
-- *****************************************************************************

mefServiceInterfaceStatisticsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceInterfaceStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the local interface statistics table for an
        MEF Ethernet compliant NE. The primary purpose of this table is to
        provide statistics information of the interface for a ME-NE. Rows are
        automatically created in the table based upon the interfaces that a MEF
        NE contains. This table contains the same rows as the 
        mefServiceInterfaceCfgTable. A SNMP Manager can access objects in each
        of the rows in the table.

        Rows in this table are accessed by the IF-MIB interface object ifIndex.

        Rows in this table are persistent (non-volatile) upon reboot, but the
        values of the objects in a row are not persistent.
       "
    REFERENCE
       "[MEF 15], [Q.840.1]"
    ::= { mefServiceInterfaceAttributes 3 }

mefServiceInterfaceStatisticsEntry OBJECT-TYPE
    SYNTAX      MefServiceInterfaceStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceInterfaceStatisticsTable."
    INDEX { ifIndex }
    ::= { mefServiceInterfaceStatisticsTable 1 }

MefServiceInterfaceStatisticsEntry ::= SEQUENCE {
      mefServiceInterfaceStatisticsIngressUndersized   Counter32,
      mefServiceInterfaceStatisticsIngressOversized    Counter32,
      mefServiceInterfaceStatisticsIngressFragments    Counter32,
      mefServiceInterfaceStatisticsIngressCrcAlignment Counter32,
      mefServiceInterfaceStatisticsIngressInvalidVid   Counter32,
      mefServiceInterfaceStatisticsIngressOctets       Counter64,
      mefServiceInterfaceStatisticsIngressUnicast      Counter64,
      mefServiceInterfaceStatisticsIngressMulticast    Counter64,
      mefServiceInterfaceStatisticsIngressBroadcast    Counter64,
      mefServiceInterfaceStatisticsEgressOctets        Counter64,
      mefServiceInterfaceStatisticsEgressUnicast       Counter64,
      mefServiceInterfaceStatisticsEgressMulticast     Counter64,
      mefServiceInterfaceStatisticsEgressBroadcast     Counter64
    }

mefServiceInterfaceStatisticsIngressUndersized   OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each frame received
        on a NE interface that was smaller than 64 octets.

        This object defaults to '0'. 
      "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 1 }

mefServiceInterfaceStatisticsIngressOversized    OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each frame received
        on a NE interface that was larger than the maximum MTU size.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 2 }

mefServiceInterfaceStatisticsIngressFragments    OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each frame received
        on a NE interface that was less than 64 octets in length
        (excluding framing bits but including FCS octets) and had 
        either a bad Frame Check Sequence (FCS) with an integral 
        number of octets (FCS Error) or a bad FCS with a non-integral
        number of octets (Alignment Error).

        Note that it is entirely normal for this counter to
        increment.  This is because it counts both runts (which are
        normal occurrences due to collisions) and noise hits.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 3 }

mefServiceInterfaceStatisticsIngressCrcAlignment OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each frame received
        on a NE interface that was from 64 octets to the maximum MTU
        size in length, but had either a bad Frame Check Sequence (FCS)
        with an integral number of octets (FCS Error) or a bad FCS with
        a non-integral number of octets (Alignment Error).

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 4 }

mefServiceInterfaceStatisticsIngressInvalidVid   OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each frame received
        on a NE interface with an invalid VLAN ID.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 5 }

mefServiceInterfaceStatisticsIngressOctets  OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented by the number of octets in a
        valid frame received on a NE interface.

        This object defaults to '0'.
      "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 6 }

mefServiceInterfaceStatisticsIngressUnicast OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each valid unicast frame received
        on a NE interface.

        NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 7 }

mefServiceInterfaceStatisticsIngressMulticast    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each valid multicast frame received
        on a NE interface.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 8 }

mefServiceInterfaceStatisticsIngressBroadcast OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each valid broadcast frame received
        on a NE interface.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 9 }

mefServiceInterfaceStatisticsEgressOctets  OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented by the number of octets in a frame 
        transmitted on a NE interface.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 10 }

mefServiceInterfaceStatisticsEgressUnicast OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each unicast frame transmitted on a
        NE interface.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 11 }

mefServiceInterfaceStatisticsEgressMulticast    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each multicast frame transmitted on a
        NE interface.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 12 }

mefServiceInterfaceStatisticsEgressBroadcast OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object is incremented for each broadcast frame transmitted on a
        NE interface.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'.
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServiceInterfaceStatisticsEntry 13 }

    
-- *****************************************************************************
-- Ethernet UNI Interface Configuration
-- *****************************************************************************

mefServiceUniCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceUniCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the specific UNI attributes configuration table
        for an MEF Ethernet compliant NE. The primary purpose of this table
        is to provide configuration of the UNI for a ME-NE. Rows are
        automatically created in the table when an interface is configured as
        type UNI via the mefServiceInterfaceCfgType object based upon the
        listed defaults by the SNMP Agent. Rows are deleted if the interface
        is configured to a non-UNI by the SNMP Agent. A SNMP Manager can modify
        values of each of the objects in the row. 

        This table may be sparsely populated based upon the number of ME-NE 
        interfaces that are configured as type UNI.

        Rows in this table are accessed by the IF-MIB interface object ifIndex.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    REFERENCE
       "[MEF 6.1], [MEF 7.2], [MEF 10.2], [Q.840.1]"
    ::= { mefServiceUniAttributes 1 }

mefServiceUniCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceUniCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceUniCfgTable."
    INDEX { ifIndex }
    ::= { mefServiceUniCfgTable 1 }

MefServiceUniCfgEntry ::= SEQUENCE {
      mefServiceUniCfgIdentifier          DisplayString,
      mefServiceUniCfgBundlingMultiplex   INTEGER,
      mefServiceUniCfgCeVidUntagged       VlanId,
      mefServiceUniCfgCePriorityUntagged  IEEE8021PriorityValue
    }

mefServiceUniCfgIdentifier OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the UNI identifier. This is distinct from 
        the mefServiceInterfaceCfgIdentifier and allows the naming of the
        UNI separately from the Interface name. The identifier is
        an arbitrary text string that is used to identify an interface. 
        Unique string values are chosen to uniquely identify the UNI.

        This object is used to add an identifier to a service interface. The
        mefServiceInterfaceCfgIdentifier can be used to add a separate 
        identifier that is associated with the physical interface name.

        Octet values of 0x00 through 0x1f are illegal.

        MEF 26.1 restricts the maximum size identifiers to 45 octets.
       "
    REFERENCE
       "[MEF 6.1] 6.0, [MEF 7.2] 6.2.1.2"
    DEFVAL { "" }
    ::= { mefServiceUniCfgEntry 1 }

mefServiceUniCfgBundlingMultiplex OBJECT-TYPE
    SYNTAX      INTEGER {
        allToOne            (1),
        bundling            (2),
        multiplex           (3),
        bundlingMultiplex   (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Configures bundling and multiplexing options for the UNI. This object
         is an enumerated list of possible multiplexing and bundling options
         on a UNI that is unambiguous and provides only the legal possibilities.

         allToOne(1)          All to One Bundling, used for Private services:
                              EPL, EP-LAN, and EP-Tree

         bundling(2)          Bundling, indicates one or more CE-VLANS per 
                              service, used for virtual private CE-VLAN 
                              preservation services: EVPL, EVP-LAN, EVP-Tree

         multiplex(3)         Service Multiplexing, indicates one or more EVCs
                              per UNI, used for virtual private CE-VLAN 
                              preservation or non-preservation services:
                              EVPL, EVP-LAN, EVP-Tree

         bundlingMultiplex(4) Service Multiplexing plus Bundling, indicates one 
                              or more EVCs per UNI that are composed of one or 
                              more CE-VLANs, used for virtual CE-VLAN 
                              preservation services: EVPL, EVP-LAN, EVP-Tree
        "
    REFERENCE
       "[MEF 6.1] 6.0, [MEF 7.2] 6.2.1.2"
    DEFVAL { allToOne }
    ::= { mefServiceUniCfgEntry 2 }

mefServiceUniCfgCeVidUntagged OBJECT-TYPE
    SYNTAX      VlanId
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Configures the CE VLAN ID associated with untagged and priority
         Service Frames. It allows the identification of untagged and 
         priority tagged traffic with a specific CE-VLAN ID. This object
         is ignored for all to one bundling at the UNI.
        "
    REFERENCE
       "[MEF 6.1] 6.0, [MEF 7.2] 6.2.1.2"
    DEFVAL { 1 }
    ::= { mefServiceUniCfgEntry 3 }

mefServiceUniCfgCePriorityUntagged OBJECT-TYPE
    SYNTAX      IEEE8021PriorityValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Configures the CE VLAN Priority associated with untagged Service
         Frames. It allows the assignment of a specific VLAN priority to
         untagged traffic. This object is ignored for all to one bundling
         at the UNI.
        "
    REFERENCE
       "[MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceUniCfgEntry 4 }


-- *****************************************************************************
-- Ethernet EVC Configuration
-- *****************************************************************************

mefServiceEvcNextIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object contains an unused value for an EVC on a
        MEF compliant NE, or a zero to indicate that none exist. This value
        needs to be read by the SNMP Manager in order to find an available
        index for row-creation of an EVC and then used when a row is created. 
        This value is automatically updated by the SNMP Agent after the row
        is created.

        Referential integrity is necessary, i.e., the index needs to be
        persistent upon a reboot or restart of a NE.  The index
        is never to be reused for a new EVC on the same MEF compliant
        NE until it wraps to zero.  The index value keeps
        increasing up to that time. This is to facilitate access control based
        on a fixed index for an EMS, since the index is not reused.
       "
    DEFVAL { 1 }
    ::= { mefServiceEvcAttributes 1 }

mefServiceEvcCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceEvcCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the specific EVC attributes configuration table
        for an MEF Ethernet compliant NE. The primary purpose of this table
        is to provide configuration of the EVC for a ME-NE.

        Rows in this table are accessed by the SNMP Manager via the EVC 
        number object mefServiceEvcCfgIndex. A new row is created in the 
        table by the SNMP Manager by first reading the mefServiceEvcNextIndex
        to find an available EVC number and using this value when the row
        is created. If an object in the row is not defined during row 
        creation time the object is set to the default value by the 
        SNMP Agent. Rows are deleted by the SNMP Manager via the 
        mefServiceEvcCfgRowStatus object.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    REFERENCE
       "[MEF 6.1], [MEF 7.2], [MEF 10.2], [Q.840.1]"
    ::= { mefServiceEvcAttributes 2 }

mefServiceEvcCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceEvcCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceEvcCfgTable."
    INDEX { mefServiceEvcCfgIndex }
    ::= { mefServiceEvcCfgTable 1 }

MefServiceEvcCfgEntry ::= SEQUENCE {
      mefServiceEvcCfgIndex                 Unsigned32,
      mefServiceEvcCfgIdentifier            DisplayString,
      mefServiceEvcCfgServiceType           INTEGER,
      mefServiceEvcCfgMtuSize               Unsigned32,
      mefServiceEvcCfgCevlanIdPreservation  MefServicePreservationType,
      mefServiceEvcCfgCevlanCosPreservation MefServicePreservationType,
      mefServiceEvcCfgUnicastDelivery       MefServiceDeliveryType,
      mefServiceEvcCfgMulticastDelivery     MefServiceDeliveryType,
      mefServiceEvcCfgBroadcastDelivery     MefServiceDeliveryType,
      mefServiceEvcCfgL2cpGrpIndex          Unsigned32,
      mefServiceEvcCfgAdminState            EntityAdminState,
      mefServiceEvcCfgRowStatus             RowStatus
    }

mefServiceEvcCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The specific instance of an EVC number."
    ::= { mefServiceEvcCfgEntry 1 }

mefServiceEvcCfgIdentifier OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the EVC identifier. The identifier is
        an arbitrary text string that is used to identify an EVC. 
        Unique string values are chosen to uniquely identify the EVC.

        Octet values of 0x00 through 0x1f are illegal.

        MEF 26.1 restricts the maximum size identifiers to 45 octets.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { "" }
    ::= { mefServiceEvcCfgEntry 2 }

mefServiceEvcCfgServiceType OBJECT-TYPE
    SYNTAX      INTEGER {
        pointToPoint            (1),
        multipointToMultipoint  (2),
        rootedMultipoint        (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the EVC service type for the ME-NE.

         pointToPoint(1)             EVC Point-to-Point service,
                                     used for EPL and EVPL services

         multipointToMultipoint(2)   EVC Multipoint-to-Multipoint Service,
                                     used for EP-LAN and EVP-LAN services
 
         rootedMultipoint(3)         EVC Rooted-Multipoint Service,
                                     used for EP-Tree and EVP-Tree services
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { pointToPoint }
    ::= { mefServiceEvcCfgEntry 3 }

mefServiceEvcCfgMtuSize OBJECT-TYPE
    SYNTAX      Unsigned32 (1522..16384)
    UNITS       "octets"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the configured EVC maximum service frame format
        size. It must be less than or equal to the
        mefServiceEvcStatusMaxMtuSize.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { 1522 }
    ::= { mefServiceEvcCfgEntry 4 }

mefServiceEvcCfgCevlanIdPreservation OBJECT-TYPE
    SYNTAX      MefServicePreservationType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the EVC CE-VLAN ID preservation.

         preserve(1)          The CE-VLAN ID is preserved. The ingress CE-VLAN
                              is the CE-VLAN ID at the egress UNI
         noPreserve(2)        The CE-VLAN ID is not preserved. The ingress 
                              CE-VLAN ID may not be the CE-VLAN ID at the egress 
                              UNI
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { preserve }
    ::= { mefServiceEvcCfgEntry 5 }

mefServiceEvcCfgCevlanCosPreservation OBJECT-TYPE
    SYNTAX      MefServicePreservationType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures EVC CE-VLAN CoS preservation.

         preserve(1)          The CE-VLAN CoS is preserved. The ingress CE-VLAN
                              CoS is the CE-VLAN CoS at the egress UNI
         noPreserve(2)        The CE-VLAN CoS is not preserved. The ingress 
                              CE-VLAN CoS may not be the CE-VLAN CoS at the 
                              egress UNI
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { preserve }
    ::= { mefServiceEvcCfgEntry 6 }

mefServiceEvcCfgUnicastDelivery OBJECT-TYPE
    SYNTAX      MefServiceDeliveryType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures EVC Unicast delivery condition.
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { unconditional }
    ::= { mefServiceEvcCfgEntry 7 }

mefServiceEvcCfgMulticastDelivery OBJECT-TYPE
    SYNTAX      MefServiceDeliveryType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures EVC Multicast delivery condition.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { unconditional }
    ::= { mefServiceEvcCfgEntry 8 }

mefServiceEvcCfgBroadcastDelivery OBJECT-TYPE
    SYNTAX      MefServiceDeliveryType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures EVC Broadcast delivery condition.
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { unconditional }
    ::= { mefServiceEvcCfgEntry 9 }

mefServiceEvcCfgL2cpGrpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index of the L2CP profile group
        (mefServiceL2cpGrpCfgIndex) associated with the current EVC on an 
        interface. A value of 0 indicates that no EVC L2CP profile group is
        associated with the EVC.

        This index indicates the L2CP profile group previously configured via
        the mefServiceL2cpGrpCfgTable and mefServiceL2cpCfgTable using the value 
        of the mefServiceL2cpGrpCfgIndex. There may be multiple entries in 
        mefServiceL2cpCfgTable using this index, each containing
        parameters for a different L2CP protocol.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.3"
    DEFVAL { 0 }
    ::= { mefServiceEvcCfgEntry 10 }

mefServiceEvcCfgAdminState OBJECT-TYPE
    SYNTAX      EntityAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object specifies the administrative state of the EVC.

        If mefServiceEvcCfgAdminState is set to 'locked', the EVC will be
        administratively locked.

        If mefServiceEvcCfgAdminState is set to 'unlocked', the EVC will be
        administratively unlocked if previously locked.

        Other values of mefServiceEvcCfgAdminState are undefined.
       "
    REFERENCE
       "[MEF 7.2] 6.2.1.3"
    DEFVAL { unlocked }
    ::= { mefServiceEvcCfgEntry 11 }

mefServiceEvcCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceEvcCfgEntry 12 }


-- *****************************************************************************
-- Ethernet UNIs on a EVC Configuration
-- *****************************************************************************

mefServiceEvcUniCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceEvcUniCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the specific EVC attributes configuration table
        for an MEF Ethernet compliant NE. The primary purpose of this table
        is to provide configuration of the EVC for a ME-NE at each MEF
        compliant interface.

        Rows in the table can only be created after the EVC is created. 
        Interfaces are added to the EVC and are selected as either a type 'root'
        or 'leaf' by the creation of the row by the SNMP Manager as addressed 
        by  mefServiceEvcCfgIndex and ifIndex. Rows are deleted by the SNMP
        Manager via the mefServiceEvcUniCfgRowStatus object.

        Rows in this table are accessed by the EVC number object 
        mefServiceEvcCfgIndex and the IF-MIB interface object ifIndex by
        the SNMP Manager.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    REFERENCE
       "[MEF 6.1], [MEF 7.2], [MEF 10.2], [Q.840.1]"
    ::= { mefServiceEvcAttributes 3 }

mefServiceEvcUniCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceEvcUniCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceEvcUniCfgTable."
    INDEX { mefServiceEvcCfgIndex, ifIndex }
    ::= { mefServiceEvcUniCfgTable 1 }

MefServiceEvcUniCfgEntry ::= SEQUENCE {
      mefServiceEvcUniCfgType               INTEGER,
      mefServiceEvcUniCfgRowStatus          RowStatus
    }

mefServiceEvcUniCfgType OBJECT-TYPE
    SYNTAX      INTEGER {
        root                  (1),
        leaf                  (2),
        unknown               (3)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object configures UNI type on an EVC.

        root(1)            Valid setting for all service types. A UNI set
                           to this value may send frames to UNIs configured
                           as 'root' or 'leaf'
        leaf(2)            Valid setting for Root-Multipoint EVCs only. A
                           UNI set to this value may send frames to UNIs
                           'root'
        unknown(3)         UNI port is not configured or illegally
                           configured. This value cannot be written, but
                           is only returned when the type is unknown.
        "
    REFERENCE
       "[MEF 10.2]"
    DEFVAL { root }
    ::= { mefServiceEvcUniCfgEntry 1 }

mefServiceEvcUniCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceEvcUniCfgEntry 2 }


-- *****************************************************************************
-- Ethernet Service EVC Status
-- *****************************************************************************

mefServiceEvcStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceEvcStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the EVC status table for an
        MEF Ethernet compliant NE. The primary purpose of this table is to
        provide status information of the EVC for a ME-NE. Rows are
        automatically created in the table by the SNMP Agent when a row is
        created in the mefServiceEvcCfgTable. This table contains the same
        rows as the mefServiceEvcCfgTable. Rows are automatically deleted
        in this table by the SNMP Agent when the corresponding row is deleted 
        in the mefServiceEvcCfgTable.

        Rows in this table are accessed via the EVC number object 
        mefServiceEvcCfgIndex by the SNMP Manager.

        Rows in this table are persistent (non-volatile) upon reboot, but the
        values of the objects in a row are not persistent.
       "
    REFERENCE
       "[MEF 10.2]"
    ::= { mefServiceEvcAttributes 4 }

mefServiceEvcStatusEntry OBJECT-TYPE
    SYNTAX      MefServiceEvcStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServiceEvcStatusTable."
    INDEX { mefServiceEvcCfgIndex }
    ::= { mefServiceEvcStatusTable 1 }

MefServiceEvcStatusEntry ::= SEQUENCE {
      mefServiceEvcStatusMaxMtuSize         Unsigned32,
      mefServiceEvcStatusMaxNumUni          Unsigned32,
      mefServiceEvcStatusOperationalState   INTEGER
    }

mefServiceEvcStatusMaxMtuSize OBJECT-TYPE
    SYNTAX      Unsigned32 (1522..16384)
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the EVC maximum configurable service
        frame format size. The actual configured size is set via the
        mefServiceEvcCfgMtuSize object.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    ::= { mefServiceEvcStatusEntry 1 }

mefServiceEvcStatusMaxNumUni OBJECT-TYPE
    SYNTAX      Unsigned32 (2..16384)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the maximum number of UNIs in an EVC. For
        a Point-to-Point EVC this value is '2'. For a Multipoint EVC the 
        value can be '2' or greater.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    ::= { mefServiceEvcStatusEntry 2 }

mefServiceEvcStatusOperationalState OBJECT-TYPE
    SYNTAX      EntityOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the operational state (current
        capability) of the EVC.

        If the value is 'enabled', the EVC is able to ingress and
        egress service frames and has been set to active.

        If the value is 'disabled' the EVC is not able to ingress and
        egress service frames, has detected an operational failure
        condition, or has failed an internal test.

        If the value is 'testing' the EVC has been placed into a test mode,
        either a troubleshooting mode or a test mode.

        If the value is 'unknown' the EVC is unable to report the operational
        state.
       "
    REFERENCE
       "[MEF 7.2] 6.2.1.3"
    ::= { mefServiceEvcStatusEntry 3 }


-- *****************************************************************************
-- Ethernet EVC per UNI Attributes Configuration
-- *****************************************************************************

mefServiceEvcPerUniCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceEvcPerUniCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table represents the specific EVC per UNI attributes configuration
        table for an MEF Ethernet compliant NE. The primary purpose of this table
        is to provide configuration of the EVC per UNI attributes for a MEF
        NE. Rows are automatically created in the table by the SNMP Agent with
        the indicated default values when an interface is added to the EVC via
        the mefServiceEvcUniCfgType object and are deleted when the corresponding
        row is deleted in the mefServiceEvcCfgTable or an interface is
        removed from the EVC. 

        Rows are accessed via the IF-MIB interface object ifIndex and the EVC
        number object mefServiceEvcCfgIndex by the SNMP Manager.

        Rows in this table and the value of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    ::= { mefServiceUniAttributes 2 }

mefServiceEvcPerUniCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceEvcPerUniCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The conceptual row of mefServicePerUniCfgTable.
       "
    INDEX { ifIndex, mefServiceEvcCfgIndex }
    ::= { mefServiceEvcPerUniCfgTable 1 }

MefServiceEvcPerUniCfgEntry ::= SEQUENCE {
     mefServiceEvcPerUniCfgServiceType          INTEGER,
     mefServiceEvcPerUniCfgIdentifier           DisplayString,
     mefServiceEvcPerUniCfgCeVlanMap            MefServiceListType,
     mefServiceEvcPerUniCfgIngressBwpGrpIndex   Unsigned32,
     mefServiceEvcPerUniCfgEgressBwpGrpIndex    Unsigned32
    }

mefServiceEvcPerUniCfgServiceType OBJECT-TYPE
    SYNTAX      INTEGER {
        epl             (1),
        evpl            (2),
        eplan           (3),
        evplan          (4),
        eptree          (5),
        evptree         (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the specific Ethernet service type. The value is 
         derived from the EVC object 'mefServiceEvcCfgType' and the UNI object
         'mefServiceUniCfgBundlingMultiplex'. 

         epl(1)      Ethernet Private Line Service (EPL)
                     Point-to-Point EVC, all to one bundling

         evpl(2)     Ethernet Virtual Private Line (EVPL)
                     Point-to-Point EVC, bundling and/or multiplexing

         eplan(3)    Ethernet Private LAN Service (EP-LAN)
                     Multipoint-to-Multipoint EVC, all to one bundling

         evplan(4)   Ethernet Virtual Private LAN Service (EVP-LAN)
                     Multipoint-to-Multipoint EVC, bundling and/or multiplexing

         eptree(5)   Ethernet Private Tree Service (EP-Tree)
                     Rooted-Multipoint EVC, all to one bundling

         evptree(6)  Ethernet Virtual Private Tree Service (EVP-Tree)
                     Rooted-Multipoint EVC, bundling and/or multiplexing
        "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { epl }
    ::= { mefServiceEvcPerUniCfgEntry 1 }

mefServiceEvcPerUniCfgIdentifier OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..90))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the concatenated EVC-UNI identifier. It is
        the concatenation of the mefServiceUniCfgIdentifier and the
        mefServiceEvcCfgIdentifier.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
::= { mefServiceEvcPerUniCfgEntry 2 }

mefServiceEvcPerUniCfgCeVlanMap OBJECT-TYPE
    SYNTAX      MefServiceListType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the CE-VLANs associated with the specific
        EVC on a UNI. CE-VLAN IDs have value of 0 to 4095. The CE-VLAN ID
        list can be a single value or multiple values separated by a delimiter.

        Some valid values are: '100', '1:10', '10,20,30', '1:4095'. In the
        first example only CE-VLAN ID 100 is associated with the VLAN map.
        In the second example the CE-VLAN map includes CE-VLAN IDs 1 through
        10 (range of values). The third example indicates three separate values
        that make up the CE-VLAN map. The last example indicates all CE-VLAN IDs
        are included in the map (range of values). 
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { "1:4095" }    
 ::= { mefServiceEvcPerUniCfgEntry 3 }

mefServiceEvcPerUniCfgIngressBwpGrpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index number of the ingress bandwidth profile group
        associated with the current EVC on a UNI. A value of 0 indicates that
        no ingress bandwidth profile group is associated with the EVC on a UNI.

        This index indicates the specific bandwidth profile group previously 
        configured via mefServiceBwpGrpCfgTable and mefServiceBwpCfgTable 
        using this value for mefServiceBwpGrpCfgIndex. There may be multiple 
        entries in mefServiceBwpCfgTable using this index, each containing
        bandwidth parameters for a different Class of Service Identifier.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { 0 }  
   ::= { mefServiceEvcPerUniCfgEntry 4 }

mefServiceEvcPerUniCfgEgressBwpGrpIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index number of the egress bandwidth profile group
        associated with the current EVC on a UNI. A value of 0 indicates that
        no egress bandwidth profile group is associated with the EVC on a UNI.

        This index indicates the specific bandwidth profile group previously 
        configured via mefServiceBwpGrpCfgTable and mefServiceBwpCfgTable 
        using this value for mefServiceBwpGrpCfgIndex. There may be multiple 
        entries in mefServiceBwpCfgTable using this index, each containing
        bandwidth parameters for a different Class of Service Identifier.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { 0 }  
    ::= { mefServiceEvcPerUniCfgEntry 5 }


-- *****************************************************************************
-- Ethernet Service Bandwidth Profile Group Table
-- *****************************************************************************

mefServiceBwpGrpNextIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object contains an unused value for a bandwidth profile group on a
        MEF compliant NE, or a zero to indicate that none exist. This value
        needs to be read by the SNMP Manager in order to find an available 
        index for row creation of a bandwidth profile group and then used when
        a row is created. This value is automatically updated by the SNMP Agent
        after the row is created.

        Referential integrity is necessary, i.e., the index needs to be
        persistent upon a reboot or restart of a NE.  The index
        is never to be reused for a new bandwidth profile group on the same MEF 
        compliant NE until it wraps to zero.  The index value keeps
        increasing up to that time. This is to facilitate access control based
        on a fixed index for an EMS, since the index is not reused.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { 1 }  
    ::= { mefServiceBwpAttributes 1 }

mefServiceBwpGrpCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceBwpGrpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table supports bandwidth profile group settings. Rows in this table 
        are created by the SNMP Manager by first reading the 
        mefServiceBwpGrpNextIndex object to find an available bandwidth 
        profile group number and using this value when the row is created. If
        an object in the row is not defined during row creation time the object
        is set to the default value by the SNMP Agent. Rows are deleted by the 
        SNMP Manager via the mefServiceBwpGrpCfgRowStatus object and the
        corresponding rows in the mefServiceBwpCfgTable and 
        mefServicePerformanceTable are deleted by the SNMP Agent.

        Once a row in this table is created, an entry can be
        created in the mefServiceBwpCfgTable using the index from this
        table and the value of mefServiceBwpCfgNextIndex object. 

        A row in the mefServiceBwpCfgTable indicates how a specific bandwidth
        profile will be handled.

        Rows in this table are accessed via the bandwidth profile group object 
        mefServiceEvcCfgIndex by the SNMP Manager.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot.
       "
    REFERENCE
       "[MEF 6.1], [MEF 6.1.1] 8.0, [MEF 7.2], [MEF 10.2]"
    ::= { mefServiceBwpAttributes 2 }

mefServiceBwpGrpCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceBwpGrpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Bandwidth profile group settings table entry."
    INDEX { mefServiceBwpGrpCfgIndex }
    ::= { mefServiceBwpGrpCfgTable 1 }

MefServiceBwpGrpCfgEntry ::= SEQUENCE {
      mefServiceBwpGrpCfgIndex      Unsigned32,
      mefServiceBwpCfgNextIndex     Unsigned32,
      mefServiceBwpGrpCfgRowStatus  RowStatus
    }

mefServiceBwpGrpCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Bandwidth profile group index number"
    ::= { mefServiceBwpGrpCfgEntry 1 }

mefServiceBwpCfgNextIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the value to be used as the index of the
         bandwidth profile table entries. This value is automatically 
         incremented when a row is created in the bandwidth profile table
         by the SNMP Agent. When the SNMP Manager wants to create a new
         row in the bandwidth profile table the value of this object is used
         to create the specific row.
        "
    DEFVAL { 1 }
    ::= { mefServiceBwpGrpCfgEntry 2 }

mefServiceBwpGrpCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceBwpGrpCfgEntry 3 }

-- *****************************************************************************
-- Ethernet Service Bandwidth Profile Table
-- *****************************************************************************

mefServiceBwpCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceBwpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table supports bandwidth profile settings and allows multiple
        bandwidth profiles to configured on an interface or a Virtual Service,
        based upon different Class of Service Identifiers.

        Rows in this table are created by the SNMP Manager by first reading
        the mefServiceBwpCfgNextIndex object to find an available bandwidth 
        profile number and using this value when the row is created. If
        an object in the row is not defined during row creation time the object
        is set to the default value by the SNMP Agent. 

        Rows are deleted by the SNMP Manager via the mefServiceBwpCfgRowStatus
        object or by the SNMP Agent when the corresponding row in the 
        mefServiceBwpGrpCfgTable is deleted. Corresponding rows in the
        mefServicePerformanceTable are deleted by the SNMP Agent.

        If resources in the ME-NE are not available to create a new bandwidth
        profile or to enable a Performance Data Set an error is returned when
        the row is created.

        A bandwidth profile can be associated to a CoS Identifier via the
        mefServiceBwpCfgCosIndex. The value set to the
        mefServiceBwpCfgCosIndex object is the value of the associated 
        CoS Identifier indicated by the mefServiceCosCfgIndex object.

        Rows in this table are accessed by the SNMP Manager via the bandwidth
        profile group object mefServiceBwpGrpCfgIndex and the individual
        bandwidth profile in the group by the mefServiceBwpCfgIndex.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    ::= { mefServiceBwpAttributes 3 }

mefServiceBwpCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceBwpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Bandwidth profile settings table entry."
    INDEX { mefServiceBwpGrpCfgIndex, mefServiceBwpCfgIndex }
    ::= { mefServiceBwpCfgTable 1 }

MefServiceBwpCfgEntry ::= SEQUENCE {
      mefServiceBwpCfgIndex             Unsigned32,
      mefServiceBwpCfgIdentifier        DisplayString,
      mefServiceBwpCfgCir               Unsigned32,
      mefServiceBwpCfgCbs               Unsigned32,
      mefServiceBwpCfgEir               Unsigned32,
      mefServiceBwpCfgEbs               Unsigned32,
      mefServiceBwpCfgCm                INTEGER,
      mefServiceBwpCfgCf                INTEGER,
      mefServiceBwpCfgCosIndex          Unsigned32,
      mefServiceBwpCfgPerformanceEnable INTEGER,
      mefServiceBwpCfgRowStatus         RowStatus
    }

mefServiceBwpCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This object indicates the bandwidth profile index number. Multiple
        bandwidth profiles can be set for the same bandwidth profile group,
        allowing for unique bandwidth profiles for each CoS Identifier. 
       "
    ::= { mefServiceBwpCfgEntry 1 }

mefServiceBwpCfgIdentifier OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the bandwidth profile identifier for the
        associated bandwidth profile index and is an arbitrary 
        text string that is used to identify a bandwidth profile. Unique
        string values are chosen to uniquely identify the bandwidth
        profile.

        Octet values of 0x00 through 0x1f are illegal.

        MEF 26.1 restricts the maximum size identifiers to 45 octets.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { "" }
   ::= { mefServiceBwpCfgEntry 2 }

mefServiceBwpCfgCir OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000000)
    UNITS       "kbits/s"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the Committed Information Rate (CIR) in kbits/s
        and defines the average rate in kbits/sec up to which 
        the network delivers Service Frames. Service Frames that meet
        the CIR are said to be in profile or in conformance to performance
        objectives. These frames are generally identified as 'Green' 
        Service Frames.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { 1000000 }
    ::= { mefServiceBwpCfgEntry 3 }

mefServiceBwpCfgCbs OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000000)
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the Committed Burst Size (CBS) in bytes. It limits
        the maximum number of bytes available for a burst of Service Frames sent
        at interface speed to remain CIR-conformant.
       "
    REFERENCE
       "[MEF 10.2]"
    DEFVAL { 12 }
    ::= { mefServiceBwpCfgEntry 4 }

mefServiceBwpCfgEir OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000000)
    UNITS       "kbits/s"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the Excess Information Rate (EIR) in kbits/s
        and defines the average rate in kbits/sec of Service Frames up to
        which the network may deliver Service Frames but without performance
        objectives. Service Frames that meet the EIR as set to be in out-of-
        profile or not in conformance to performance objectives. These 
        frames are not guaranteed to be delivered and are generally identified
        as 'Yellow' service frames.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { 0 }
    ::= { mefServiceBwpCfgEntry 5 }

mefServiceBwpCfgEbs OBJECT-TYPE
    SYNTAX      Unsigned32 (0..10000000)
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the Excess Burst Size (EBS) in bytes. It limits
        the maximum number of bytes available for a burst of Service Frames
        sent at the interface speed to remain EIR-conformant.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { 0 }
    ::= { mefServiceBwpCfgEntry 6 }

mefServiceBwpCfgCm OBJECT-TYPE
    SYNTAX      INTEGER {
        colorBlind      (1),
        colorAware      (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the bandwidth profile color mode.

        colorBlind(1)    A bandwidth profile property where ingress 
                         Service Frames are not pre-colored for either 
                         green or yellow, and if present, is ignored when
                         determining the level of compliance for each
                         Service Frame
        colorAware(2)    A bandwidth profile property were a pre-determined
                         level of Bandwidth Profile compliance for each
                         Service Frame is taken into account when determining
                         the level of compliance for each Service Frame. 
                         Each service frame can be colored red (discarded),
                         yellow (conditional delivery), or green (unconditional
                         delivery.
        "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { colorBlind }
    ::= { mefServiceBwpCfgEntry 7 }

mefServiceBwpCfgCf OBJECT-TYPE
    SYNTAX      INTEGER {
        couplingYellowEirOnly     (0),
        couplingYellowEirPlusCir  (1)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the bandwidth profile coupling flag and has
         the effect of controlling the volume of the Service Frames that are
         declared Yellow.

        couplingYellowEirOnly(0)     The long term average bit rate of Service
                                     Frames that are declared Yellow is bounded
                                     by EIR.         
        couplingYellowEirPlusCir(1)  The long term average bit rate of Service
                                     Frames that are declared Yellow is bounded
                                     by CIR + EIR depending on the volume of
                                     the offered Service Frames that are 
                                     declared Green.
        "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { couplingYellowEirOnly }
    ::= { mefServiceBwpCfgEntry 8 }

mefServiceBwpCfgCosIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is the index number of the CoS ID profile
        associated with the current bandwidth profile. A value of 0 indicates
        that no CoS ID profile is associated with the bandwidth profile and the
        bandwidth profile applies to all CoS IDs.

        This index indicates a specific CoS ID profile previously configured via
        mefServiceCosCfgTable as indicated by the mefServiceCosCfgIndex object.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { 0 }  
    ::= { mefServiceBwpCfgEntry 9 }

mefServiceBwpCfgPerformanceEnable OBJECT-TYPE
    SYNTAX      INTEGER {
        disablePerformanceDataSet (1),
        enablePerformanceDataSet  (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates whether a performance data set is configured
        for a specific bandwidth profile. This allows for only specific
        bandwidth profiles to be monitored if there are limitations in the
        ME-NE being accessed.

        disablePerformanceDataSet(1) A performance data set is enabled for this
                                     bandwidth profile
        enablePerformanceDataSet(2)  A performance data set is not enabled for
                                     this bandwidth profile.
       "
    REFERENCE
       "[MEF 6.1] 6.1; [MEF 7.2] 6.2.1.3"
    DEFVAL { disablePerformanceDataSet }  
    ::= { mefServiceBwpCfgEntry 10 }

mefServiceBwpCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceBwpCfgEntry 11 }


-- *****************************************************************************
-- Ethernet Service Class of Service Identifier Profile Table
-- *****************************************************************************

mefServiceCosNextIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object contains an unused value for a Class of Service Identifier
        (CoS ID) profile on a MEF compliant NE, or a zero to indicate that none
        exist. This value needs to be read by the SNMP Manager in order to find
        an available index for row-creation of a CoS ID profile and then used
        when a row is created. This value is automatically updated by the SNMP
        Agent after the row is created.

        Referential integrity is necessary, i.e., the index needs to be
        persistent upon a reboot or restart of a NE.  The index
        is never to be reused for a new CoS ID profile on the same MEF compliant
        NE until it wraps to zero.  The index value keeps
        increasing up to that time. This is to facilitate access control based
        on a fixed index for an EMS, since the index is not reused.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { 1 }  
    ::= { mefServiceCosAttributes 1 }

mefServiceCosCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceCosCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table supports Class of Service Identifier profile settings.

        Rows in this table are created by the SNMP Manager by first reading
        the mefServiceCosNextIndex object to find an available Cos  
        profile number and using this value when the row is created. If
        an object in the row is not defined during row creation time the object
        is set to the default value by the SNMP Agent. 

        Rows are deleted by the SNMP Manager via the mefServiceCosCfgRowStatus
        object.

        If resources in the ME-NE are not available to create a new CoS
        profile an error is returned when the row is created.

        Rows in this table are accessed by the SNMP Manager via the CoS
        profile object mefServiceCosCfgIndex.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    ::= { mefServiceCosAttributes 2 }

mefServiceCosCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceCosCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Class of Service Identifier settings table entry."
    INDEX { mefServiceCosCfgIndex }
    ::= { mefServiceCosCfgTable 1 }

MefServiceCosCfgEntry ::= SEQUENCE {
      mefServiceCosCfgIndex             Unsigned32,
      mefServiceCosCfgIdentifier        DisplayString,
      mefServiceCosCfgType              INTEGER,
      mefServiceCosCfgIdentifierList    MefServiceListType,
      mefServiceCosCfgMacAddress        MacAddress,
      mefServiceCosCfgProtocol          Unsigned32,
      mefServiceCosCfgSubType           Unsigned32,
      mefServiceCosCfgRowStatus         RowStatus
    }

mefServiceCosCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Class of Service Identifier profile index number."
    ::= { mefServiceCosCfgEntry 1 }

mefServiceCosCfgIdentifier OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object indicates the Class of Service Name for the
        associated CoS profile index and is an arbitrary text string that is
        used to identify a CoS ID profile. Unique string values are chosen to 
        uniquely identify the profile.

        Octet values of 0x00 through 0x1f are illegal.

        MEF 26.1 restricts the maximum size identifiers to 45 octets.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { "" }
    ::= { mefServiceCosCfgEntry 2 }

mefServiceCosCfgType OBJECT-TYPE
    SYNTAX      INTEGER {
        interface       (1),
        evc             (2),
        pcp             (3),
        dscp            (4),
        l2cp            (5)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object configures the CoS ID type and indicates the interpretation
        of the mefServiceCosIdentifierList object.

        interface(1) This value indicates that the CoS ID profile is associated
                     with the interface, i.e. UNI or ENNI
        vc(2)        This value indicates that the CoS ID profile is associated
                     with the virtual channel, i.e. EVC or OVC
        pcp(3)       This value indicates that the CoS ID profile is associated
                     with the outer tag's Priority Code Point (priority bits)
        dscp(4)      This value indicates that the CoS ID profile is associated
                     the IP's frames DSCP (priority) setting
        l2cp(5)      This value indicates that the CoS ID profile is associated
                     a Layer 2 Control Protocol
        "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { pcp }
    ::= { mefServiceCosCfgEntry 3 }

mefServiceCosCfgIdentifierList OBJECT-TYPE
    SYNTAX      MefServiceListType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object indicates the list of CoS identifiers associated with
        the specific CoS ID profile. Interpretation of the values in the list
        are based upon the mefServiceCosCfgType object.

        For each of the mefServiceCosCfgType types valid range is:

        interface - the value of this object is ignored for the 'interface'
                    type
        vc        - the value of this object is ignored for the 'vc' type
        pcp       - the value of this object has a range of '0:7'
        dscp      - the value of this object has a range of '0:63' for IPv4
                    and '0:16384' for IPv6
        l2cp      - the value of this object indicates the matching criteria:
                    '1' - destination MAC address only
                    '2' - destination MAC address plus Ethernet protocol
                    '3' - destination MAC address plus Ethernet protocol 
                          plus subtype

        CoS identifier list can be a single value or multiple values separated
        by a delimiter.

        Some valid values are: '1', '1:3', '1,3,5', '0:7'. In the first example
        only one item, '1', is included in the CoS ID list. In the second example
        values 1, 2, and 3 are included in the CoS ID list (range of values). In
        the third example three individual values are included. In the fourth
        example eight values are included: 0 through 7 (range of values).
       "
    REFERENCE
       "[MEF 6.1] 6.0, 6.1, 6.2, 6.3; [MEF 7.2] 6.2.1.2, 6.2.1.3"
    DEFVAL { "0:7" }
   ::= { mefServiceCosCfgEntry 4 }

mefServiceCosCfgMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the L2CP Destination MAC address for CoS 
         Identifier type of 'l2cp' and is ignored for other types.

         Valid values are 01-80-C2-00-00-00 through 01-80-C2-00-00-0F and
         01-80-C2-00-00-20 through 01-80-C2-00-00-2F
        "
    DEFVAL { '000000000000'H }
    ::= { mefServiceCosCfgEntry 5 }

mefServiceCosCfgProtocol OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the L2CP Ethernet protocol for CoS Identifier
         type of 'l2cp' and is ignored for other types. It is also ignored if
         mefServiceCosCfgIdentifierList has a value of '1'.

         The protocol is defined in the Ethertype field of the Ethertype
         frame. For instance the Ethertype for Link OAM is 0x8809, for 
         E-LMI it is 0x88EE, for LLDP it is 0x88CC.

         Valid protocol values are defined by MEF 6.1 and MEF 6.1.1.
        "
    REFERENCE
       "[MEF 6.1] 6.0, 8.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceCosCfgEntry 6 }

mefServiceCosCfgSubType OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the L2CP subtype protocol for CoS Identifier
         type of 'l2cp' and is ignored for other types. It is also ignored if
         mefServiceCosCfgIdentifierList has a value of '1' or '2'.

         For instance, the subtype for LACP is '2' and Link OAM is '3'.

         Valid subtype values are defined by MEF 6.1 and MEF 6.1.1.
        "
    REFERENCE
       "[MEF 6.1] 6.0, 8.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceCosCfgEntry 7 }

mefServiceCosCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceCosCfgEntry 8 }


-- *****************************************************************************
-- Ethernet Service L2CP Profile Group Table
-- *****************************************************************************

mefServiceL2cpGrpNextIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object contains an unused value for a L2CP profile group on a
        MEF compliant NE, or a zero to indicate that none exist. This value
        needs to be read by the SNMP Manager in order to find an available
        index for row-creation of a L2CP profile group and then used when
        a row is created. This value is automatically updated by the SNMP Agent
        after the row is created.

        Referential integrity is necessary, i.e., the index needs to be
        persistent upon a reboot or restart of a NE.  The index
        is never to be reused for a new L2CP profile group on the same MEF 
        compliant NE until it wraps to zero.  The index value keeps
        increasing up to that time. This is to facilitate access control based
        on a fixed index for an EMS, since the index is not reused.
       "
    REFERENCE
       "[MEF 6.1], [MEF 6.1.1] 8.0, [MEF 7.2], [MEF 10.2]"
    DEFVAL { 1 }  
    ::= { mefServiceL2cpAttributes 1 }

mefServiceL2cpGrpCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceL2cpGrpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table supports a group of L2CP settings for an interface via the
        mefServiceInterfaceCfgL2cpGrpIndex object or for a service via the 
        mefServiceEvcCfgL2cpGrpIndex object. 

        Rows in this table are created by the SNMP Manager by first reading
        the mefServiceL2cpGrpNextIndex object to find an available L2CP 
        profile group number and using this value when the row is created. 
        If an object in the row is not defined during row creation time the
        object is set to the default value by the SNMP Agent. 

        Rows are deleted by the SNMP Manager via the 
        mefServiceL2cpGrpCfgRowStatus object and corresponding rows in the
        mefServiceL2cpCfgTable are deleted by the SNMP Agent.

        Once a row in this table is created, an entry can be created in the 
         mefServiceL2cpCfgTable using the index from this table and the
        value of mefServiceL2cpCfgNextIndex object. A row in the 
        mefServiceL2cpCfgTable indicates how a specific L2CP will be
        handled.

        Rows in this table are accessed by the L2CP group number object
        mefServiceL2cpGrpCfgIndex.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    REFERENCE
       "[MEF 6.1], [MEF 6.1.1] 8.0, [MEF 7.2], [MEF 10.2]"
    ::= { mefServiceL2cpAttributes 2 }

mefServiceL2cpGrpCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceL2cpGrpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "L2CP profile group settings table entry on an interface."
    INDEX { mefServiceL2cpGrpCfgIndex }
    ::= { mefServiceL2cpGrpCfgTable 1 }

MefServiceL2cpGrpCfgEntry ::= SEQUENCE {
      mefServiceL2cpGrpCfgIndex         Unsigned32,
      mefServiceL2cpCfgNextIndex Unsigned32,
      mefServiceL2cpGrpCfgRowStatus     RowStatus
    }

mefServiceL2cpGrpCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "L2CP profile group index number, indicating the specific L2CP profile 
         group
        "
    ::= { mefServiceL2cpGrpCfgEntry 1 }

mefServiceL2cpCfgNextIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the value to be used as the index of the L2CP
         table entries. This value is automatically incremented when a row
         is created in the L2CP table by the SNMP Agent. When the SNMP
         Manager wants to create a new row in the L2CP table the value
         of this object is used to create the specific item row.
         
         A group of L2CP protocols is indicated by the use of the
         mefServiceL2cpCfgTable, which allows more than one
         Layer 2 Protcol to be associated within a L2CP profile group.
        "
    DEFVAL { 1 }
    ::= { mefServiceL2cpGrpCfgEntry 2 }

mefServiceL2cpGrpCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceL2cpGrpCfgEntry 3 }


-- *****************************************************************************
-- Ethernet Service L2CP Profile Table
-- *****************************************************************************

mefServiceL2cpCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServiceL2cpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table supports L2CP profile settings. Each row in the table 
        indicates a specific L2CP and its processing type. Once a row is
        created in the mefServiceL2cpGrpCfgTable one or more rows can be
        created in the mefServiceL2cpCfgTable table to indicate a group
        of Layer 2 Control Protocols that are handled as one L2CP profile
        group.

        Rows in this table are created by the SNMP Manager by first reading
        the mefServiceL2cpCfgNextIndex object to find an available L2CP 
        profile number and using this value when the row is created. If
        an object in the row is not defined during row creation time the object
        is set to the default value by the SNMP Agent. 

        Rows are deleted by the SNMP Manager via the 
        mefServiceL2cpGrpCfgRowStatus object or by the SNMP Agent when
        the corresponding row is deleted in the mefServiceL2cpGrpCfgTable.

        Rows in this table are accessed by the L2CP group number object
        mefServiceL2cpGrpCfgIndex and the individual L2CP profile in the
        group via the mefServiceL2cpCfgIndex object.

        Rows in this table and the values of the objects in the row are 
        persistent (non-volatile) upon reboot. 
       "
    REFERENCE
       "[MEF 6.1], [MEF 7.2], [MEF 10.2]"
    ::= { mefServiceL2cpAttributes 3 }

mefServiceL2cpCfgEntry OBJECT-TYPE
    SYNTAX      MefServiceL2cpCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "L2CP settings table entry on an interface or a service."
    INDEX { mefServiceL2cpGrpCfgIndex, mefServiceL2cpCfgIndex }
    ::= { mefServiceL2cpCfgTable 1 }

MefServiceL2cpCfgEntry ::= SEQUENCE {
      mefServiceL2cpCfgIndex       Unsigned32,
      mefServiceL2cpCfgType        INTEGER,
      mefServiceL2cpCfgMatchScope  INTEGER,
      mefServiceL2cpCfgMacAddress  MacAddress,
      mefServiceL2cpCfgProtocol    Unsigned32,
      mefServiceL2cpCfgSubType     Unsigned32,
      mefServiceL2cpCfgRowStatus   RowStatus
    }

mefServiceL2cpCfgIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This object configures the L2CP index number on an interface or a 
         Service and is used to create/access a L2CP profile within a L2CP 
         group.
        "
    ::= { mefServiceL2cpCfgEntry 1 }

mefServiceL2cpCfgType OBJECT-TYPE
    SYNTAX      INTEGER {
        discard   (1),
        tunnel    (2),
        peer      (3),
        passToEvc (4)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object configures the L2CP processing type setting.

        discard(1)     the indicated L2CP is discarded
        tunnel(2)      the indicated L2CP is tunneled (passed)
        peer(3)        the indicated L2CP is peered with the NE
        passToEvc(4)   the indicated L2CP is passed to the EVC for
                       EVC processing of the L2CP. Final L2CP 
                       disposition is based the L2CP profile for
                       the EVC to be tunneled, discarded, or peered.
                       This value is not valid for EVC based
                       L2CP.
       "
    REFERENCE
       "[MEF 6.1] 6.0, 8.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { tunnel }
    ::= { mefServiceL2cpCfgEntry 2 }

mefServiceL2cpCfgMatchScope OBJECT-TYPE
    SYNTAX      INTEGER {
        destinationAddressOnly         (1),
        daPlusProtocol                 (2),
        daPlusProtocolPlusSubtype      (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "This object configures the L2CP selection matching scope.

        destinationAddressOnly(1)     L2CP selection is determined by
                                      MAC Destination Address only
        daPlusProtocol(2)             L2CP selection is determined by
                                      MAC Destination Address plus 
                                      Ethernet protocol
        daPlusProtocolPlusSubtype(3)  L2CP selection is determined by
                                      MAC Destination Address plus 
                                      Ethernet protocol plus subtype
       "
    REFERENCE
       "[MEF 6.1] 6.0, 8.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { destinationAddressOnly }
    ::= { mefServiceL2cpCfgEntry 3 }

mefServiceL2cpCfgMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the L2CP Destination MAC address.

         Valid values are 01-80-C2-00-00-00 through 01-80-C2-00-00-0F and
         01-80-C2-00-00-20 through 01-80-C2-00-00-2F
        "
    DEFVAL { '0180C2000000'H }
    ::= { mefServiceL2cpCfgEntry 4 }

mefServiceL2cpCfgProtocol OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures the L2CP Ethernet protocol. The protocol is 
         defined in the Ethertype field of the Ethertype frame. For instance the
         Ethertype for Link OAM is 0x8809, for E-LMI it is 0x88EE, for
         LLDP it is 0x88CC.

         Valid protocol values are defined by MEF 6.1 and MEF 6.1.1.
        "
    REFERENCE
       "[MEF 6.1] 6.0, 8.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceL2cpCfgEntry 5 }

mefServiceL2cpCfgSubType OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object configures L2CP subtype for the protocol selected. For
         instance, the subtype for LACP is '2' and Link OAM is '3'.

         Valid subtype values are defined by MEF 6.1 and MEF 6.1.1.
        "
    REFERENCE
       "[MEF 6.1] 6.0, 8.0; [MEF 6.1.1] 8.0; [MEF 7.2] 6.2.1.2"
    DEFVAL { 0 }
    ::= { mefServiceL2cpCfgEntry 6 }

mefServiceL2cpCfgRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "The status of the row.

        The writable columns in a row cannot be changed if the row
        is active. All columns must have a valid value before a row
        can be activated.
       "
   ::= { mefServiceL2cpCfgEntry 7 }


-- *****************************************************************************
-- Ethernet Service Traffic Performance Data Set Table
-- *****************************************************************************

mefServicePerformanceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MefServicePerformanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "This table supports Traffic Performance Data Set profile settings on 
        a Bandwidth Profile.

        A row in this table is automatically created when a row in the 
        mefServiceBwpCfgTable is created. This table contains the same rows as
        the mefServiceBwpCfgTable. 

        A row in this table is deleted when a row in the mefServiceBwpCfgTable
        is deleted. Counters in the table are only enabled when the associated
        object, mefServiceBwpCfgPerformanceEnable, is enabled. 

        Rows in this table are accessed via the bandwidth profile group 
        object mefServiceBwpGrpCfgIndex and the individual bandwidth profile
        in the group by the mefServiceBwpCfgIndex object. A SNMP Manager 
        can access objects in each of the rows in the table.

        Rows in this table are persistent (non-volatile) upon reboot, but the
        values of the objects in a row are not persistent.
       "
    ::= { mefServiceBwpAttributes 4 }

mefServicePerformanceEntry OBJECT-TYPE
    SYNTAX      MefServicePerformanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Traffic Performance Data Set profile settings table entry."
    INDEX { mefServiceBwpGrpCfgIndex, mefServiceBwpCfgIndex }
    ::= { mefServicePerformanceTable 1 }

MefServicePerformanceEntry ::= SEQUENCE {
      mefServicePerformanceIngressGreenFrameCount            Counter64,
      mefServicePerformanceIngressYellowFrameCount           Counter64,
      mefServicePerformanceIngressRedFrameCount              Counter64,
      mefServicePerformanceIngressGreenOctets                Counter64,
      mefServicePerformanceIngressYellowOctets               Counter64,
      mefServicePerformanceIngressRedOctets                  Counter64,

      mefServicePerformanceIngressGreenFrameDiscards         Counter64,
      mefServicePerformanceIngressYellowFrameDiscards        Counter64,
      mefServicePerformanceIngressGreenOctetsDiscards        Counter64,
      mefServicePerformanceIngressYellowOctetsDiscards       Counter64,

      mefServicePerformanceEgressGreenFrameCount             Counter64,
      mefServicePerformanceEgressYellowFrameCount            Counter64,
      mefServicePerformanceEgressGreenOctets                 Counter64,
      mefServicePerformanceEgressYellowOctets                Counter64
    }

mefServicePerformanceIngressGreenFrameCount    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of green frames that were 
        received on a ME-NE for the associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 1 }

mefServicePerformanceIngressYellowFrameCount    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of yellow frames that were 
        received on the ME-NE for the associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 2 }

mefServicePerformanceIngressRedFrameCount    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of red frames that were 
        received on the ME-NE for the associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 3 }

mefServicePerformanceIngressGreenOctets   OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid green octets 
        that were received on the ME-NE for the associated bandwidth 
        profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 4 }

mefServicePerformanceIngressYellowOctets   OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid yellow octets 
        that were received on the ME-NE for the associated bandwidth
        profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 5 }

mefServicePerformanceIngressRedOctets   OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid red octets 
        that were received on the ME-NE for the associated bandwidth
        profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 6 }

mefServicePerformanceIngressGreenFrameDiscards OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of green frames that were 
        discarded due to congestion within the ME-NE for the
        associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 7 }

mefServicePerformanceIngressYellowFrameDiscards  OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of yellow frames that were 
        discarded due to congestion within the ME-NE for the 
        associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 8 }

mefServicePerformanceIngressGreenOctetsDiscards  OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid green octets 
        that were discarded due to congestion within the ME-NE for the
        associated bandwidth profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 9 }

mefServicePerformanceIngressYellowOctetsDiscards  OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid yellow octets 
        that were discarded due to congestion within the ME-NE for the
        associated bandwidth profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 10 }

mefServicePerformanceEgressGreenFrameCount    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of green frames that were 
        transmitted on the ME-NE for the associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 11 }

mefServicePerformanceEgressYellowFrameCount    OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "Ethernet frames"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of yellow frames that were 
        transmitted on the ME-NE for the associated bandwidth profile.

        ME-NEs that do not support 64 bit counters can return the
        upper half of the counter as all zeros.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 12 }

mefServicePerformanceEgressGreenOctets   OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid green octets 
        that were transmitted on the ME-NE for the associated bandwidth 
        profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 13 }

mefServicePerformanceEgressYellowOctets   OBJECT-TYPE
    SYNTAX      Counter64
    UNITS       "octets"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This object indicates the number of valid yellow octets 
        that were transmitted on the ME-NE for the associated bandwidth 
        profile.

        This object defaults to '0'. 
       "
    REFERENCE
       "[MEF 15] 8.2; [Q.840.1] 6.2.4"
    ::= { mefServicePerformanceEntry 14 }


-- *****************************************************************************
-- Notification Configuration Objects
-- *****************************************************************************

mefServiceNotificationCfgAlarmEnable OBJECT-TYPE
    SYNTAX      BITS {
                     bServiceConfigurationAlarm(0)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This object is a vector of bits that indicates whether a specific
        notification is enabled. 

        A bit set to '1' enables the specific notification generation. 

        A bit set to '0' disables the specific notification.

        If a particular alarm is not supported the BIT value of the enable/disable
        is set to '0'.

        bServiceConfigurationAlarm(0)  enables/disables mefServiceConfigurationAlarm

        The value of this object is persistent (non-volatile) upon reboot.
       "
    DEFVAL { { } }
    ::= { mefServiceNotificationCfg 1 }


-- *****************************************************************************
-- Notification Data Objects
-- *****************************************************************************

mefServiceNotificationObjDateAndTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
       "This object contains the time and date at the time that
        the notification event is detected, not the time of the notification
        generation.

        This object is used only for notifications. The mechanism to set and keep
        current the date and time is not specified.
       "
    ::= { mefServiceNotificationObj 1 }

mefServiceNotificationConfigurationChangeType OBJECT-TYPE
    SYNTAX      INTEGER {
                  entryAdded     (1),
                  entryDeleted   (2),
                  entryModified  (3)
                }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
       "The Notification Configuration Change Type of the object that caused the
        generation.

        entryAdded(1)    indicates that the specific object/service was added
        entryDelete(2)   indicates that the specific object/service was deleted
        entryModified(3) indicates that the specific object/service was modified

        This object is only used for the notification.
       "
    REFERENCE
       "[MEF 7.2] 6.2.1.1, 6.2.1.2, 6.2.1.3"
    ::= { mefServiceNotificationObj 2 }


-- *****************************************************************************
-- NOTIFICATIONS (TRAPS)
-- *****************************************************************************

mefServiceConfigurationAlarm NOTIFICATION-TYPE
    OBJECTS     {
                mefServiceNotificationObjDateAndTime,
                mefServiceNotificationConfigurationChangeType
                }
    STATUS      current
    DESCRIPTION
       "An mefServiceConfigurationAlarm notification is sent when the configuration
        of an object or service is added, deleted, or modified.

        The ME-NE that receives the notification can identify
        the system from the network source address of the notification,
        and can identify the configuration change by the indices in the
        standard snmpTrapOID object.
       "
    REFERENCE
       "[MEF 7.2] 6.2.1.1, 6.2.1.2, 6.2.1.3"
    ::= { mefServiceNotifications 1 }


-- *****************************************************************************
-- SERVICE-UNI MIB Module - Conformance Information
-- *****************************************************************************

mefServiceUniEvcMibCompliances OBJECT IDENTIFIER ::= { mefServiceMibConformance 1 }
mefServiceUniEvcMibGroups      OBJECT IDENTIFIER ::= { mefServiceMibConformance 2 }


-- ******************************************************************
-- SERVICE-UNI MIB Units of conformance
-- ******************************************************************

mefServiceInterfaceMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServiceInterfaceCfgType,
      mefServiceInterfaceCfgIdentifier,
      mefServiceInterfaceCfgFrameFormat,
      mefServiceInterfaceCfgIngressBwpGrpIndex,
      mefServiceInterfaceCfgEgressBwpGrpIndex,
      mefServiceInterfaceCfgL2cpGrpIndex,
      mefServiceInterfaceStatusType,
      mefServiceInterfaceStatusMaxVc,
      mefServiceInterfaceStatusMaxEndPointPerVc,
      mefServiceInterfaceStatisticsIngressUndersized,
      mefServiceInterfaceStatisticsIngressOversized,
      mefServiceInterfaceStatisticsIngressFragments,
      mefServiceInterfaceStatisticsIngressCrcAlignment,
      mefServiceInterfaceStatisticsIngressInvalidVid,
      mefServiceInterfaceStatisticsIngressOctets,
      mefServiceInterfaceStatisticsIngressUnicast,
      mefServiceInterfaceStatisticsIngressMulticast,
      mefServiceInterfaceStatisticsIngressBroadcast,
      mefServiceInterfaceStatisticsEgressOctets,
      mefServiceInterfaceStatisticsEgressUnicast,
      mefServiceInterfaceStatisticsEgressMulticast,
      mefServiceInterfaceStatisticsEgressBroadcast
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the Interface group."
    ::= { mefServiceUniEvcMibGroups 1 }


mefServiceUniMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServiceUniCfgIdentifier,
      mefServiceUniCfgBundlingMultiplex,
      mefServiceUniCfgCeVidUntagged,
      mefServiceUniCfgCePriorityUntagged,
      mefServiceEvcPerUniCfgServiceType,
      mefServiceEvcPerUniCfgIdentifier,
      mefServiceEvcPerUniCfgCeVlanMap,
      mefServiceEvcPerUniCfgIngressBwpGrpIndex,
      mefServiceEvcPerUniCfgEgressBwpGrpIndex
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the UNI Attributes group."
    ::= { mefServiceUniEvcMibGroups 2 }


mefServiceEvcMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServiceEvcNextIndex,
      mefServiceEvcCfgIdentifier,
      mefServiceEvcCfgServiceType,
      mefServiceEvcCfgMtuSize,
      mefServiceEvcCfgCevlanIdPreservation,
      mefServiceEvcCfgCevlanCosPreservation,
      mefServiceEvcCfgL2cpGrpIndex,
      mefServiceEvcCfgAdminState,
      mefServiceEvcCfgRowStatus,
      mefServiceEvcUniCfgType,
      mefServiceEvcUniCfgRowStatus,
      mefServiceEvcStatusMaxMtuSize,
      mefServiceEvcStatusMaxNumUni,
      mefServiceEvcStatusOperationalState
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the EVC Attributes group."
    ::= { mefServiceUniEvcMibGroups 3 }


mefServiceEvcOptionalGroup OBJECT-GROUP
    OBJECTS {
      mefServiceEvcCfgUnicastDelivery,
      mefServiceEvcCfgMulticastDelivery,
      mefServiceEvcCfgBroadcastDelivery
    }
    STATUS      current
    DESCRIPTION
       "Optional objects for the EVC Attributes group."
    ::= { mefServiceUniEvcMibGroups 4 }


mefServiceBwpMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServiceBwpGrpNextIndex,
      mefServiceBwpCfgNextIndex,
      mefServiceBwpGrpCfgRowStatus,
      mefServiceBwpCfgIdentifier,
      mefServiceBwpCfgCir,
      mefServiceBwpCfgCbs,
      mefServiceBwpCfgEir,
      mefServiceBwpCfgEbs,
      mefServiceBwpCfgCm,
      mefServiceBwpCfgCf,
      mefServiceBwpCfgCosIndex,
      mefServiceBwpCfgPerformanceEnable,
      mefServiceBwpCfgRowStatus
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the Bandwidth Profile Attributes group."
    ::= { mefServiceUniEvcMibGroups 5 }


mefServiceCosMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServiceCosNextIndex,
      mefServiceCosCfgIdentifier,
      mefServiceCosCfgType,
      mefServiceCosCfgIdentifierList,
      mefServiceCosCfgMacAddress,
      mefServiceCosCfgProtocol,
      mefServiceCosCfgSubType,
      mefServiceCosCfgRowStatus
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the Class of Service Attributes group."
    ::= { mefServiceUniEvcMibGroups 6 }


mefServiceL2cpMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServiceL2cpGrpNextIndex,
      mefServiceL2cpCfgNextIndex,
      mefServiceL2cpGrpCfgRowStatus,
      mefServiceL2cpCfgType,
      mefServiceL2cpCfgMatchScope,
      mefServiceL2cpCfgMacAddress,
      mefServiceL2cpCfgProtocol,
      mefServiceL2cpCfgSubType,
      mefServiceL2cpCfgRowStatus
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the L2CP Attributes group."
    ::= { mefServiceUniEvcMibGroups 7 }


mefServicePerformanceMandatoryGroup OBJECT-GROUP
    OBJECTS {
      mefServicePerformanceIngressGreenFrameCount,
      mefServicePerformanceIngressGreenOctets,
      mefServicePerformanceEgressGreenFrameCount,
      mefServicePerformanceEgressGreenOctets
    }
    STATUS      current
    DESCRIPTION
       "Mandatory objects for the Bandwidth Profile Performance group."
    ::= { mefServiceUniEvcMibGroups 8 }


mefServicePerformanceOptionalGroup OBJECT-GROUP
    OBJECTS {
      mefServicePerformanceIngressYellowFrameCount,
      mefServicePerformanceIngressRedFrameCount,
      mefServicePerformanceIngressYellowOctets,
      mefServicePerformanceIngressRedOctets,
      mefServicePerformanceEgressYellowFrameCount,
      mefServicePerformanceEgressYellowOctets,
      mefServicePerformanceIngressGreenFrameDiscards,
      mefServicePerformanceIngressYellowFrameDiscards,
      mefServicePerformanceIngressGreenOctetsDiscards,
      mefServicePerformanceIngressYellowOctetsDiscards
    }
    STATUS      current
    DESCRIPTION
       "Optional objects for the Bandwidth Profile Performance group."
    ::= { mefServiceUniEvcMibGroups 9 }


mefServiceNotificationObjOptionalGroup OBJECT-GROUP
    OBJECTS {
      mefServiceNotificationCfgAlarmEnable,      
      mefServiceNotificationObjDateAndTime,
      mefServiceNotificationConfigurationChangeType
    }
    STATUS      current
    DESCRIPTION
       "Optional objects for the Notification Object group."
    ::= { mefServiceUniEvcMibGroups 10 }


mefServiceNotificationsOptionalGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
      mefServiceConfigurationAlarm
    }
    STATUS      current
    DESCRIPTION
       "Optional notifications for the Notifications group."
    ::= { mefServiceUniEvcMibGroups 11 }


-- ******************************************************************
-- UNI-EVC MIB Module Compliance statements
-- ******************************************************************

mefServiceUniMibCompliance MODULE-COMPLIANCE
    STATUS       current
    DESCRIPTION "The compliance statement for the Ethernet Service 
        UNI-EVC MIB."
    MODULE
        MANDATORY-GROUPS {
            mefServiceInterfaceMandatoryGroup,
            mefServiceUniMandatoryGroup,
            mefServiceEvcMandatoryGroup,
            mefServiceBwpMandatoryGroup,
            mefServiceCosMandatoryGroup,
            mefServiceL2cpMandatoryGroup,
            mefServicePerformanceMandatoryGroup
        }

    GROUP mefServiceEvcOptionalGroup
    DESCRIPTION "The mefServiceEvcOptionalGroup is an optional 
        requirement."

    GROUP mefServicePerformanceOptionalGroup
    DESCRIPTION "The mefServicePerformanceOptionalGroup is an optional 
        requirement."

    GROUP mefServiceNotificationObjOptionalGroup
    DESCRIPTION "The mefServiceNotificationObjOptionalGroup is an optional 
        requirement."

    GROUP mefServiceNotificationsOptionalGroup
    DESCRIPTION "The mefServiceNotificationsOptionalGroup is an optional 
        requirement."

    ::= { mefServiceUniEvcMibCompliances 1 }

END