david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/MPLS-VPN-MIB

1764 lines
59 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- MPLS-VPN-MIB.my: MPLS Virtual Private Networks MIB
--
-- Oct 2001, Michael T Piecuch
--
-- Copyright (c) 2001 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
--
-- This MIB is based of version 03 the IETF draft
-- draft-ietf-ppvpn-mpls-vpn-mib-03.txt
--
-- (mpiecuch, 04/30/2002)
-- This IETF draft version does not compile cleanly with SMIC. The
-- latest draft fixes the compiler issues, but the MIB described in this
-- file represents the old version and has been modified so that it will
-- compile.
--
-- The following changes were made:
-- o mplsVpnVrfName (an INDEX object) was set to MAX-ACCESS
-- 'not-accessible'
-- o mplsVpnInterfaceConfIndex (an INDEX object) was set to MAX-ACCESS
-- 'not-accessible'
-- o INDEX objects (mplsVpnVrfName and mplsVpnInterfaceConfIndex)
-- were removed from the notifications.
-- o INDEX objects in mplsVpnVrfBgpNbrPrefixEntry modified
-- o Removed unused IMPORT objects
-- o Added dummy BITS value for mplsVpnInterfaceVpnRouteDistProtocol
-- so that it would start at position 0
MPLS-VPN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
experimental, Integer32, Counter32, Unsigned32
-- TimeTicks
-- Removed so that MIB would complile (mpiecuch, 04/20/2002)
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
TimeStamp, DisplayString
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB;
-- bgp4PathAttrIpAddrPrefix, bgp4PathAttrIpAddrPrefixLen,
-- bgp4PathAttrPeer
-- FROM BGP4-MIB;
--
-- Commented out so MIB would compile (mpiecuch, 04/30/2002)
mplsVpnMIB MODULE-IDENTITY
LAST-UPDATED "200110151200Z" -- 15 October 2001 12:00:00 GMT
ORGANIZATION "Provider Provisioned Virtual Private
Networks Working Group."
CONTACT-INFO
" Thomas D. Nadeau
tnadeau@cisco.com
Luyuan Fang
luyuanfang@att.com
Stephen Brannon
Fabio M. Chiussi
fabio@bell-labs.com
Joseph Dube
jdube@avici.com
Martin Tatham
martin.tatham@bt.com
Harmen van der Linde
hvdl@att.com
Comments and discussion to ppvpn@ietf.org"
DESCRIPTION
"This MIB contains managed object definitions for the
Multiprotocol Label Switching (MPLS)/Border Gateway
Protocol (BGP) Virtual Private Networks (VPNs) as
defined in : Rosen, E., Viswanathan, A., and R.
Callon, Multiprotocol Label Switching Architecture,
RFC3031, January 2001."
-- Revision history.
REVISION "200110151200Z" -- 15 October 2001 12:00:00 GMT
DESCRIPTION
"Fixed compilation errors from last version.
Changed mplsVpnInterfaceVpnRouteDistProtocol to be a BITS
structure to allow more than one to be selected.
Changed mplsIfDown -> mplsVrfIfDown
Changed mplsIfUp -> mplsVrfIfUp
"
REVISION
"200110051200Z" -- 05 October 2001 12:00:00 GMT
DESCRIPTION
"Added integer index and removed route distinguisher index
from mplsVpnVrfRouteTargetTable.
Removed mplsVpn ifType; simply use mpls(166) ifType for
MPLS VPN-enabled interfaces instead.
Removed interface and protocol-related objects from
mplsVpnVrfTable.
Moved mplsVpnVrfConfMaxPossibleRoutes from
mplsVpnVrfTable to scalar object.
Removed mplsVpnActiveVrfInterfaces scalar object.
Removed mplsVpnVrfUpTime object from mplsVpnVrfTable.
Added MplsVpnVrfBgpNbrPrefixTable providing a linkage with
the bgp4PathAttrTable of the BGPv4 MIB."
REVISION
"200107171200Z" -- 17 July 2001 12:00:00 GMT
DESCRIPTION
"Removed mplsVpnVrfRouteTargetImport/Export from route target
table, and modified indexing to better reflect N <> R
distribution policy. Also added new object called
mplsVpnVrfRouteTargetType which denotes import/export
policy for the specified route target.
Added mplsVpnInterfaceConfRowStatus which allows for
an interface to be associated with a VPN through SNMP
configuration.
Added VrfName to index of VrfInterfaceConfEntry which allows
interfaces to be associated with the appropriate VRF.
Modified description of mplsVpnVrfConfMaxPossibleRoutes and
mplsVpnVrfConfMaxRoutes to allow for undetermined value.
Removed 'both' enumerated value in mplsVpnVrfBgpNbrRole.
Updated example to reflect these changes."
REVISION
"200107101200Z" -- 10 July 2001 12:00:00 GMT
DESCRIPTION
"Renamed mplsNumVrfSecViolationThreshExceeded to
mplsNumVrfSecIllegalLabelThreshExceeded, and removed
mplsVpnInterfaceConfIndex from varbind.
Changed MplsVpnId TC from SnmpAdminString to OCTET STRING.
Added mplsVpnVrfSecIllegalLabelRcvThresh to
mplsVpnVrfSecEntry.
Changed duplicate mplsVpnVrfRouteTargetImport in
mplsVpnVrfRouteTargetEntry INDEX to
mplsVpnVrfRouteTargetExport."
REVISION
"200106191200Z" -- 19 June 2001 12:00:00 GMT
DESCRIPTION
"Fixed several compile errors."
REVISION
"200105301200Z" -- 30 May 2001 12:00:00 EST
DESCRIPTION
"Updated most of document and MIB to reflect comments from WG."
REVISION
"200009301200Z" -- 30 September 2000 12:00:00 EST
DESCRIPTION
"Initial draft version."
::= { experimental 118 }
-- Textual Conventions.
MplsVpnId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An identifier that is assigned to each MPLS/BGP VPN and
is used to uniquely identify it. This is assigned by the
system operator or NMS and SHOULD be unique throughout
the MPLS domain. If this is the case, then this identifier
can then be used at any LSR within a specific MPLS domain
to identify this MPLS/BGP VPN. It may also be possible to
preserve the uniqueness of this identifier across MPLS
domain boundaries, in which case this identifier can then
be used to uniquely identify MPLS/BGP VPNs on a more global
basis."
REFERENCE
"RFC 2685 [VPN-RFC2685] Fox B., et al, 'Virtual Private
Networks Identifier', September 1999."
SYNTAX OCTET STRING(SIZE (0..31))
MplsVpnRouteDistinguisher ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Syntax for a route distinguisher and route target."
SYNTAX OCTET STRING(SIZE (0..256))
-- Top level components of this MIB.
mplsVpnNotifications OBJECT IDENTIFIER ::= { mplsVpnMIB 0 }
mplsVpnObjects OBJECT IDENTIFIER ::= { mplsVpnMIB 1 }
mplsVpnScalars OBJECT IDENTIFIER ::= { mplsVpnObjects 1 }
mplsVpnConf OBJECT IDENTIFIER ::= { mplsVpnObjects 2 }
mplsVpnPerf OBJECT IDENTIFIER ::= { mplsVpnObjects 3 }
mplsVpnRoute OBJECT IDENTIFIER ::= { mplsVpnObjects 4 }
mplsVpnConformance OBJECT IDENTIFIER ::= { mplsVpnMIB 3 }
--
-- Scalar Objects
--
mplsVpnConfiguredVrfs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VRFs which are configured on this node."
::= { mplsVpnScalars 1 }
mplsVpnActiveVrfs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VRFs which are active on this node.
That is, those VRFs whose corresponding mplsVpnVrfOperStatus
object value is equal to operational (1)."
::= { mplsVpnScalars 2 }
mplsVpnConnectedInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of interfaces connected to a VRF."
::= { mplsVpnScalars 3 }
mplsVpnNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is true, then it enables the
generation of all notifications defined in
this MIB."
DEFVAL { false }
::= { mplsVpnScalars 4 }
mplsVpnVrfConfMaxPossibleRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes maximum number of routes which the device
will allow all VRFs jointly to hold. If this value is
set to 0, this indicates that the device is
unable to determine the absolute maximum. In this
case, the configured maximum MAY not actually
be allowed by the device."
::= { mplsVpnScalars 5 }
-- VPN Interface Configuration Table
mplsVpnInterfaceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS capability
and associated information."
::= { mplsVpnConf 1 }
mplsVpnInterfaceConfEntry OBJECT-TYPE
SYNTAX MplsVpnInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every interface capable of supporting MPLS/BGP VPN.
Each entry in this table is meant to correspond to
an entry in the Interfaces Table."
INDEX { mplsVpnVrfName, mplsVpnInterfaceConfIndex }
::= { mplsVpnInterfaceConfTable 1 }
MplsVpnInterfaceConfEntry ::= SEQUENCE {
mplsVpnInterfaceConfIndex InterfaceIndex,
mplsVpnInterfaceLabelEdgeType INTEGER,
mplsVpnInterfaceVpnClassification INTEGER,
mplsVpnInterfaceVpnRouteDistProtocol BITS,
mplsVpnInterfaceConfStorageType StorageType,
mplsVpnInterfaceConfRowStatus RowStatus
}
mplsVpnInterfaceConfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
--
-- MAX-ACCESS accessible-for-notify
--
-- The MAX-ACCESS for an auxiliary (INDEX) object must be
-- 'not-accessible'. This was changed from the IETF draft
-- version so that this MIB would compile. (mpiecuch, 04/30/2002)
--
STATUS current
DESCRIPTION
"This is a unique index for an entry in the
MplsVPNInterfaceConfTable. A non-zero index for an
entry indicates the ifIndex for the corresponding
interface entry in the MPLS-VPN-layer in the ifTable.
Note that this table does not necessarily correspond
one-to-one with all entries in the Interface MIB
having an ifType of MPLS-layer; rather, only those
which are enabled for MPLS/BGP VPN functionality."
REFERENCE
"RFC 2233 - The Interfaces Group MIB using SMIv2,
McCloghrie, K., and F. Kastenholtz, Nov. 1997"
::= { mplsVpnInterfaceConfEntry 1 }
mplsVpnInterfaceLabelEdgeType OBJECT-TYPE
SYNTAX INTEGER { providerEdge (1),
customerEdge (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the providerEdge(0) (PE) or customerEdge(1)
(CE) bit MUST be set."
::= { mplsVpnInterfaceConfEntry 2 }
mplsVpnInterfaceVpnClassification OBJECT-TYPE
SYNTAX INTEGER { carrierOfCarrier (1),
enterprise (2),
interProvider (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes whether this link participates in a
carrier-of-carrier's, enterprise, or inter-provider
scenario."
::= { mplsVpnInterfaceConfEntry 3 }
mplsVpnInterfaceVpnRouteDistProtocol OBJECT-TYPE
SYNTAX BITS { dummy(0), -- So that MIB will
-- compile (mpiecuch, 04/30/2002)
none (1),
bgp (2),
ospf (3),
rip(4),
isis(5),
other (6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the route distribution protocol across the
PE-CE link. Note that more than one routing protocol
may be enabled at the same time."
::= { mplsVpnInterfaceConfEntry 4 }
mplsVpnInterfaceConfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this entry."
::= { mplsVpnInterfaceConfEntry 5 }
mplsVpnInterfaceConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status for this entry. This value is
used to create a row in this table, signifying
that the specified interface is to be associated
with the specified interface. If this operation
succeeds, the interface will have been associated,
otherwise the agent would not allow the association.
If the agent only allows read-only operations on
this table, it will create entries in this table
as they are created."
::= { mplsVpnInterfaceConfEntry 6 }
-- VRF Configuration Table
mplsVpnVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS/BGP VPN
VRF Table capability and associated information.
Entries in this table define VRF routing instances
associated with MPLS/VPN interfaces. Note that
multiple interfaces can belong to the same VRF
instance. The collection of all VRF instances
comprises an actual VPN."
::= { mplsVpnConf 2 }
mplsVpnVrfEntry OBJECT-TYPE
SYNTAX MplsVpnVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. The
indexing provides an ordering of VRFs per-VPN
interface."
INDEX { mplsVpnVrfName }
::= { mplsVpnVrfTable 1 }
MplsVpnVrfEntry ::= SEQUENCE {
mplsVpnVrfName MplsVpnId,
mplsVpnVrfDescription SnmpAdminString,
mplsVpnVrfRouteDistinguisher MplsVpnRouteDistinguisher,
mplsVpnVrfCreationTime TimeStamp,
mplsVpnVrfOperStatus INTEGER,
mplsVpnVrfActiveInterfaces Unsigned32,
mplsVpnVrfAssociatedInterfaces Unsigned32,
mplsVpnVrfConfMidRouteThreshold Unsigned32,
mplsVpnVrfConfHighRouteThreshold Unsigned32,
mplsVpnVrfConfMaxRoutes Unsigned32,
mplsVpnVrfConfLastChanged TimeStamp,
mplsVpnVrfConfRowStatus RowStatus,
mplsVpnVrfConfStorageType StorageType
}
mplsVpnVrfName OBJECT-TYPE
SYNTAX MplsVpnId
MAX-ACCESS not-accessible
--
-- MAX-ACCESS accessible-for-notify
--
-- The MAX-ACCESS for an auxiliary (INDEX) object must be
-- 'not-accessible'. This was changed from the IETF draft
-- version so that this MIB would compile. (mpiecuch, 04/30/2002)
--
STATUS current
DESCRIPTION
"The human-readable name of this VPN. This MAY
be equivalent to the RFC2685 VPN-ID."
REFERENCE
"RFC 2685 [VPN-RFC2685] Fox B., et al, `Virtual
Private Networks Identifier`, September 1999."
::= { mplsVpnVrfEntry 1 }
mplsVpnVrfDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The human-readable description of this VRF."
::= { mplsVpnVrfEntry 2 }
mplsVpnVrfRouteDistinguisher OBJECT-TYPE
SYNTAX MplsVpnRouteDistinguisher
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route distinguisher for this VRF."
::= { mplsVpnVrfEntry 3 }
mplsVpnVrfCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which this VRF entry was created."
::= { mplsVpnVrfEntry 4 }
mplsVpnVrfOperStatus OBJECT-TYPE
SYNTAX INTEGER { up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes whether a VRF is operational or not. A VRF is
up(1) when at least one interface associated with the
VRF, which ifOperStatus is up(1). A VRF is down(2) when:
a. There does not exist at least one interface whose
ifOperStatus is up(1).
b. There are no interfaces associated with the VRF."
::= { mplsVpnVrfEntry 5 }
mplsVpnVrfActiveInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of interfaces connected to this VRF with
ifOperStatus = up(1).
This counter should be incremented when:
a. When the ifOperStatus of one of the connected interfaces
changes from down(2) to up(1).
b. When an interface with ifOperStatus = up(1) is connected
to this VRF.
This counter should be decremented when:
a. When the ifOperStatus of one of the connected interfaces
changes from up(1) to down(2).
b. When one of the connected interfaces with
ifOperStatus = up(1) gets disconnected from this VRF."
::= { mplsVpnVrfEntry 6 }
mplsVpnVrfAssociatedInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of interfaces connected to this VRF
(independent of ifOperStatus type)."
::= { mplsVpnVrfEntry 7 }
mplsVpnVrfConfMidRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes mid-level water marker for the number
of routes which this VRF may hold."
::= { mplsVpnVrfEntry 8 }
mplsVpnVrfConfHighRouteThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes high-level water marker for the number of
routes which this VRF may hold."
::= { mplsVpnVrfEntry 9 }
mplsVpnVrfConfMaxRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes maximum number of routes which this VRF is
configured to hold. This value MUST be less than or
equal to mplsVrfMaxPossibleRoutes unless it is set
to 0."
::= { mplsVpnVrfEntry 10 }
mplsVpnVrfConfLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the last
change of this table entry, which includes changes of
VRF parameters defined in this table or addition or
deletion of interfaces associated with this VRF."
::= { mplsVpnVrfEntry 11 }
mplsVpnVrfConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsVpnVrfEntry 12 }
mplsVpnVrfConfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this entry."
::= { mplsVpnVrfEntry 13 }
-- MplsVpnRouteTargetTable
mplsVpnVrfRouteTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN."
::= { mplsVpnConf 3 }
mplsVpnVrfRouteTargetEntry OBJECT-TYPE
SYNTAX MplsVpnVrfRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in this table is created by an LSR for
each route target configured for a VRF supporting
a MPLS/BGP VPN instance. The indexing provides an
ordering per-VRF instance."
INDEX { mplsVpnVrfName, mplsVpnVrfRouteTargetIndex,
mplsVpnVrfRouteTargetType }
::= { mplsVpnVrfRouteTargetTable 1 }
MplsVpnVrfRouteTargetEntry ::= SEQUENCE {
mplsVpnVrfRouteTargetIndex Unsigned32,
mplsVpnVrfRouteTargetType INTEGER,
mplsVpnVrfRouteTarget MplsVpnRouteDistinguisher,
mplsVpnVrfRouteTargetDescr DisplayString,
mplsVpnVrfRouteTargetRowStatus RowStatus
}
mplsVpnVrfRouteTargetIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Auxiliary index for route-targets configured for a
particular VRF."
::= { mplsVpnVrfRouteTargetEntry 2 }
mplsVpnVrfRouteTargetType OBJECT-TYPE
SYNTAX INTEGER { import(1), export(2), both(3) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The route target export distribution type."
::= { mplsVpnVrfRouteTargetEntry 3 }
mplsVpnVrfRouteTarget OBJECT-TYPE
SYNTAX MplsVpnRouteDistinguisher
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route target distribution policy."
::= { mplsVpnVrfRouteTargetEntry 4 }
mplsVpnVrfRouteTargetDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description of the route target."
::= { mplsVpnVrfRouteTargetEntry 5 }
mplsVpnVrfRouteTargetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for this entry."
::= { mplsVpnVrfRouteTargetEntry 6 }
-- MplsVpnVrfBgpNbrAddrTable
mplsVpnVrfBgpNbrAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table specifies a per-interface
MPLS/EBGP neighbor."
::= { mplsVpnConf 4 }
mplsVpnVrfBgpNbrAddrEntry OBJECT-TYPE
SYNTAX MplsVpnVrfBgpNbrAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. The
indexing provides an ordering of VRFs per-VPN
interface."
INDEX { mplsVpnVrfName, mplsVpnInterfaceConfIndex,
mplsVpnVrfBgpNbrIndex }
::= { mplsVpnVrfBgpNbrAddrTable 1 }
MplsVpnVrfBgpNbrAddrEntry ::= SEQUENCE {
mplsVpnVrfBgpNbrIndex Unsigned32,
mplsVpnVrfBgpNbrRole INTEGER,
mplsVpnVrfBgpNbrType InetAddressType,
mplsVpnVrfBgpNbrAddr InetAddress,
mplsVpnVrfBgpNbrRowStatus RowStatus,
mplsVpnVrfBgpNbrStorageType StorageType
}
mplsVpnVrfBgpNbrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a unique tertiary index for an entry in the
MplsVpnVrfBgpNbrAddrEntry Table."
::= { mplsVpnVrfBgpNbrAddrEntry 1 }
mplsVpnVrfBgpNbrRole OBJECT-TYPE
SYNTAX INTEGER { ce(1), pe(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the role played by this EBGP neighbor
with respect to this VRF."
::= { mplsVpnVrfBgpNbrAddrEntry 2 }
mplsVpnVrfBgpNbrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the address family of the PE address."
::= { mplsVpnVrfBgpNbrAddrEntry 3 }
mplsVpnVrfBgpNbrAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the EBGP neighbor address."
::= { mplsVpnVrfBgpNbrAddrEntry 4 }
mplsVpnVrfBgpNbrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsVpnVrfBgpNbrAddrEntry 5 }
mplsVpnVrfBgpNbrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this entry."
::= { mplsVpnVrfBgpNbrAddrEntry 6 }
-- MplsVpnVrfBgpNbrPrefixTable
--
-- Ed note: this table will be removed as soon as the BGP4 MIB
-- is updated.
--
mplsVpnVrfBgpNbrPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfBgpNbrPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-VRF vpnv4 multi-protocol
prefixes supported by BGP."
::= { mplsVpnConf 5 }
mplsVpnVrfBgpNbrPrefixEntry OBJECT-TYPE
SYNTAX MplsVpnVrfBgpNbrPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every BGP prefix associated with a VRF supporting a
MPLS/BGP VPN. The indexing provides an ordering of
BGP prefixes per VRF."
INDEX { mplsVpnVrfName, mplsVpnVrfBgpPathAttrIpAddrPrefix,
mplsVpnVrfBgpPathAttrIpAddrPrefixLen,
mplsVpnVrfBgpPathAttrPeer }
-- INDEX { mplsVpnVrfName, bgp4PathAttrIpAddrPrefix,
-- bgp4PathAttrIpAddrPrefixLen, bgp4PathAttrPeer }
--
-- Changed indexing for this table so that it would compile
-- (mpiecuch, 04/30/2002)
::= { mplsVpnVrfBgpNbrPrefixTable 1 }
MplsVpnVrfBgpNbrPrefixEntry ::= SEQUENCE {
mplsVpnVrfBgpPathAttrPeer InetAddress,
mplsVpnVrfBgpPathAttrIpAddrPrefixLen INTEGER,
mplsVpnVrfBgpPathAttrIpAddrPrefix InetAddress,
mplsVpnVrfBgpPathAttrOrigin INTEGER,
mplsVpnVrfBgpPathAttrASPathSegment OCTET STRING,
mplsVpnVrfBgpPathAttrNextHop InetAddress,
mplsVpnVrfBgpPathAttrMultiExitDisc INTEGER,
mplsVpnVrfBgpPathAttrLocalPref INTEGER,
mplsVpnVrfBgpPathAttrAtomicAggregate INTEGER,
mplsVpnVrfBgpPathAttrAggregatorAS INTEGER,
mplsVpnVrfBgpPathAttrAggregatorAddr InetAddress,
mplsVpnVrfBgpPathAttrCalcLocalPref INTEGER,
mplsVpnVrfBgpPathAttrBest INTEGER,
mplsVpnVrfBgpPathAttrUnknown OCTET STRING
}
mplsVpnVrfBgpPathAttrPeer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the peer where the path
information was learned."
::= { mplsVpnVrfBgpNbrPrefixEntry 1 }
mplsVpnVrfBgpPathAttrIpAddrPrefixLen OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length in bits of the IP address prefix
in the Network Layer Reachability
Information field."
::= { mplsVpnVrfBgpNbrPrefixEntry 2 }
mplsVpnVrfBgpPathAttrIpAddrPrefix OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by mplsVpnVrfBgpPathAttrIpAddrPrefixLen.
Any bits beyond the length specified by
mplsVpnVrfBgpPathAttrIpAddrPrefixLen are zeroed."
::= { mplsVpnVrfBgpNbrPrefixEntry 3 }
mplsVpnVrfBgpPathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER { igp(1),-- networks are interior
egp(2),-- networks learned via EGP
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ultimate origin of the path
information."
::= { mplsVpnVrfBgpNbrPrefixEntry 4 }
mplsVpnVrfBgpPathAttrASPathSegment OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs a
route in the UPDATE
message has traversed
2 AS_SEQUENCE: ordered set of ASs
a route in the UPDATE
message has traversed.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;"
::= { mplsVpnVrfBgpNbrPrefixEntry 5 }
mplsVpnVrfBgpPathAttrNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used for the destination
network."
::= { mplsVpnVrfBgpNbrPrefixEntry 6 }
mplsVpnVrfBgpPathAttrMultiExitDisc OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system. A value of -1
indicates the absence of this attribute."
::= { mplsVpnVrfBgpNbrPrefixEntry 7 }
mplsVpnVrfBgpPathAttrLocalPref OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speaker's degree of
preference for an advertised route. A
value of -1 indicates the absence of this
attribute."
::= { mplsVpnVrfBgpNbrPrefixEntry 8 }
mplsVpnVrfBgpPathAttrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER { lessSpecificRrouteNotSelected(1),
lessSpecificRouteSelected(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the local system has
selected a less specific route without
selecting a more specific route."
::= { mplsVpnVrfBgpNbrPrefixEntry 9 }
mplsVpnVrfBgpPathAttrAggregatorAS OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute."
::= { mplsVpnVrfBgpNbrPrefixEntry 10 }
mplsVpnVrfBgpPathAttrAggregatorAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker
that performed route aggregation. A value
of 0.0.0.0 indicates the absence of this
attribute."
::= { mplsVpnVrfBgpNbrPrefixEntry 11 }
mplsVpnVrfBgpPathAttrCalcLocalPref OBJECT-TYPE
SYNTAX INTEGER (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route. A value of -1 indicates the
absence of this attribute."
::= { mplsVpnVrfBgpNbrPrefixEntry 12 }
mplsVpnVrfBgpPathAttrBest OBJECT-TYPE
SYNTAX INTEGER { false(1),-- not chosen as best route
true(2) -- chosen as best route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route."
::= { mplsVpnVrfBgpNbrPrefixEntry 13 }
mplsVpnVrfBgpPathAttrUnknown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One or more path attributes not understood
by this BGP4 speaker. Size zero (0)
indicates the absence of such
attribute(s). Octets beyond the maximum
size, if any, are not recorded by this
object."
::= { mplsVpnVrfBgpNbrPrefixEntry 14 }
-- VRF Security Table
mplsVpnVrfSecTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfSecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per MPLS/BGP VPN VRF Table security
features."
::= { mplsVpnConf 6 }
mplsVpnVrfSecEntry OBJECT-TYPE
SYNTAX MplsVpnVrfSecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN. Each
entry in this table is used to indicate security-related
information for each VRF entry."
AUGMENTS { mplsVpnVrfEntry }
::= { mplsVpnVrfSecTable 1 }
MplsVpnVrfSecEntry ::= SEQUENCE {
mplsVpnVrfSecIllegalLabelViolations Counter32,
mplsVpnVrfSecIllegalLabelRcvThresh Unsigned32
}
mplsVpnVrfSecIllegalLabelViolations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of illegally received labels on this VPN/VRF."
::= { mplsVpnVrfSecEntry 1 }
mplsVpnVrfSecIllegalLabelRcvThresh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of illegally received labels above which this
notification is issued."
::= { mplsVpnVrfSecEntry 2 }
-- VRF Performance Table
mplsVpnVrfPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per MPLS/BGP VPN VRF Table performance
information."
::= { mplsVpnPerf 1 }
mplsVpnVrfPerfEntry OBJECT-TYPE
SYNTAX MplsVpnVrfPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every VRF capable of supporting MPLS/BGP VPN."
AUGMENTS { mplsVpnVrfEntry }
::= { mplsVpnVrfPerfTable 1 }
MplsVpnVrfPerfEntry ::= SEQUENCE {
mplsVpnVrfPerfRoutesAdded Counter32,
mplsVpnVrfPerfRoutesDeleted Counter32,
mplsVpnVrfPerfCurrNumRoutes Unsigned32
}
mplsVpnVrfPerfRoutesAdded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of routes added to this VPN/VRF over the
coarse of its lifetime."
::= { mplsVpnVrfPerfEntry 1 }
mplsVpnVrfPerfRoutesDeleted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of routes removed from this VPN/VRF."
::= { mplsVpnVrfPerfEntry 2 }
mplsVpnVrfPerfCurrNumRoutes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of routes currently used by this VRF."
::= { mplsVpnVrfPerfEntry 3 }
-- VRF Routing Table
mplsVpnVrfRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsVpnVrfRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS/BGP VPN VRF Table
routing information. Entries in this table define VRF routing
entries associated with the specified MPLS/VPN interfaces. Note
that this table contains both BGP and IGP routes, as both may
appear in the same VRF."
REFERENCE
"1. RFC 1213 Section 6.6, The IP Group.
2. RFC 2096 "
::= { mplsVpnRoute 1 }
mplsVpnVrfRouteEntry OBJECT-TYPE
SYNTAX MplsVpnVrfRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for every route
present configured (either dynamically or statically) within
the context of a specific VRF capable of supporting MPLS/BGP
VPN. The indexing provides an ordering of VRFs per-VPN
interface."
INDEX { mplsVpnVrfName, mplsVpnVrfRouteDest,
mplsVpnVrfRouteMask, mplsVpnVrfRouteTos,
mplsVpnVrfRouteNextHop }
::= { mplsVpnVrfRouteTable 1 }
MplsVpnVrfRouteEntry ::= SEQUENCE {
mplsVpnVrfRouteDest InetAddress,
mplsVpnVrfRouteDestAddrType InetAddressType,
mplsVpnVrfRouteMask InetAddress,
mplsVpnVrfRouteMaskAddrType InetAddressType,
mplsVpnVrfRouteTos Unsigned32,
mplsVpnVrfRouteNextHop InetAddress,
mplsVpnVrfRouteNextHopAddrType InetAddressType,
mplsVpnVrfRouteIfIndex InterfaceIndex,
mplsVpnVrfRouteType INTEGER,
mplsVpnVrfRouteProto INTEGER,
mplsVpnVrfRouteAge Unsigned32,
mplsVpnVrfRouteInfo OBJECT IDENTIFIER,
mplsVpnVrfRouteNextHopAS Unsigned32,
mplsVpnVrfRouteMetric1 Integer32,
mplsVpnVrfRouteMetric2 Integer32,
mplsVpnVrfRouteMetric3 Integer32,
mplsVpnVrfRouteMetric4 Integer32,
mplsVpnVrfRouteMetric5 Integer32,
mplsVpnVrfRouteRowStatus RowStatus,
mplsVpnVrfRouteStorageType StorageType
}
mplsVpnVrfRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route.
This object may not take a Multicast (Class D)
address value.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bit-wise logical-AND of x with
the value of the corresponding instance of the
mplsVpnVrfRouteMask object is not equal to x."
::= { mplsVpnVrfRouteEntry 1 }
mplsVpnVrfRouteDestAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address type of the mplsVpnVrfRouteDest
entry."
::= { mplsVpnVrfRouteEntry 2 }
mplsVpnVrfRouteMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the mplsVpnVrfRouteDest field.
For those systems that do not support
arbitrary subnet masks, an agent constructs the
value of the mplsVpnVrfRouteMask by reference
to the IP Address Class.
Any assignment (implicit or otherwise) of an
instance of this object to a value x must be
rejected if the bit-wise logical-AND of x with
the value of the corresponding instance of the
mplsVpnVrfRouteDest object is not equal to
mplsVpnVrfRouteDest."
::= { mplsVpnVrfRouteEntry 3 }
mplsVpnVrfRouteMaskAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address type of mplsVpnVrfRouteMask."
::= { mplsVpnVrfRouteEntry 4 }
mplsVpnVrfRouteTos OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP TOS Field is used to specify the policy to
be applied to this route. The encoding of IP TOS
is as specified by the following convention.
Zero indicates the default path if no more
specific policy applies.
+-----+-----+-----+-----+-----+-----+-----+-----+
| | | |
| PRECEDENCE | TYPE OF SERVICE | 0 |
| | | |
+-----+-----+-----+-----+-----+-----+-----+-----+
IP TOS IP TOS
Field Policy Field Policy
Contents Code Contents Code
0 0 0 0 ==> 0 0 0 0 1 ==> 2
0 0 1 0 ==> 4 0 0 1 1 ==> 6
0 1 0 0 ==> 8 0 1 0 1 ==> 10
0 1 1 0 ==> 12 0 1 1 1 ==> 14
1 0 0 0 ==> 16 1 0 0 1 ==> 18
1 0 1 0 ==> 20 1 0 1 1 ==> 22
1 1 0 0 ==> 24 1 1 0 1 ==> 26
1 1 1 0 ==> 28 1 1 1 1 ==> 30."
::= { mplsVpnVrfRouteEntry 5 }
mplsVpnVrfRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On remote routes, the address of the next
system en route; Otherwise, 0.0.0.0. ."
::= { mplsVpnVrfRouteEntry 6 }
mplsVpnVrfRouteNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address type of the mplsVpnVrfRouteNextHopAddrType
object."
::= { mplsVpnVrfRouteEntry 7 }
mplsVpnVrfRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex value that identifies the local
interface through which the next hop of this
route should be reached."
::= { mplsVpnVrfRouteEntry 8 }
mplsVpnVrfRouteType OBJECT-TYPE
SYNTAX INTEGER { other (1), -- not specified
reject (2), -- route to discard traffic
local (3), -- local interface
remote (4) -- remote destination
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination; remote(4) refers to a route for
that the next hop is not the final destination.
Routes which do not result in traffic forwarding or
rejection should not be displayed even if the
implementation keeps them stored internally.
reject (2) refers to a route which, if matched,
discards the message as unreachable. This is used
in some protocols as a means of correctly aggregating
routes."
::= { mplsVpnVrfRouteEntry 9 }
mplsVpnVrfRouteProto OBJECT-TYPE
SYNTAX INTEGER { other (1), -- not specified
local (2), -- local interface
netmgmt (3), -- static route
icmp (4), -- result of ICMP Redirect
-- the following are all dynamic
-- routing protocols
egp (5), -- Exterior Gateway Protocol
ggp (6), -- Gateway-Gateway Protocol
hello (7), -- FuzzBall HelloSpeak
rip (8), -- Berkeley RIP or RIP-II
isIs (9), -- Dual IS-IS
esIs (10), -- ISO 9542
ciscoIgrp (11), -- Cisco IGRP
bbnSpfIgp (12), -- BBN SPF IGP
ospf (13), -- Open Shortest Path First
bgp (14), -- Border Gateway Protocol
idpr (15), -- InterDomain Policy Routing
ciscoEigrp (16) -- Cisco EIGRP
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing mechanism via which this route was
learned. Inclusion of values for gateway rout-
ing protocols is not intended to imply that
hosts should support those protocols."
::= { mplsVpnVrfRouteEntry 10 }
mplsVpnVrfRouteAge OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds since this route was
last updated or otherwise determined to be
correct. Note that no semantics of `too old'
can be implied except through knowledge of the
routing protocol by which the route was
learned."
::= { mplsVpnVrfRouteEntry 11 }
mplsVpnVrfRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the
particular routing protocol which is responsi-
ble for this route, as determined by the value
specified in the route's mplsVpnVrfRouteProto
value. If this information is not present, its
value SHOULD be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntactically valid object
identif-ier, and any implementation conforming
to ASN.1 and the Basic Encoding Rules must be
able to generate and recognize this value."
::= { mplsVpnVrfRouteEntry 12 }
mplsVpnVrfRouteNextHopAS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Autonomous System Number of the Next Hop.
The semantics of this object are determined by
the routing-protocol specified in the route's
mplsVpnVrfRouteProto value. When this object is
unknown or not relevant its value should be set
to zero."
::= { mplsVpnVrfRouteEntry 13 }
mplsVpnVrfRouteMetric1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mplsVpnVrfRouteProto value. If this metric is not
used, its value should be set to -1."
::= { mplsVpnVrfRouteEntry 14 }
mplsVpnVrfRouteMetric2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mplsVpnVrfRouteProto value. If this metric is not
used, its value should be set to -1."
::= { mplsVpnVrfRouteEntry 15 }
mplsVpnVrfRouteMetric3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mplsVpnVrfRouteProto value. If this metric is not
used, its value should be set to -1."
::= { mplsVpnVrfRouteEntry 16 }
mplsVpnVrfRouteMetric4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mplsVpnVrfRouteProto value. If this metric is not
used, its value should be set to -1."
::= { mplsVpnVrfRouteEntry 17 }
mplsVpnVrfRouteMetric5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
mplsVpnVrfRouteProto value. If this metric is not
used, its value should be set to -1."
::= { mplsVpnVrfRouteEntry 18 }
mplsVpnVrfRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for this table. It is used according
to row installation and removal conventions."
::= { mplsVpnVrfRouteEntry 19 }
mplsVpnVrfRouteStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Storage type value."
::= { mplsVpnVrfRouteEntry 20 }
-- MPLS/BGP VPN Notifications
mplsVrfIfUp NOTIFICATION-TYPE
-- OBJECTS {
--
-- mplsVpnInterfaceConfIndex,
-- mplsVpnVrfName
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'. They are not allowed to be included within
-- a notification. This change to the IETF draft was necessary for
-- the MIB to compile. (mpiecuch, 04/30/2002)
--
-- }
STATUS current
DESCRIPTION
"This notification is generated when:
a. The ifOperStatus of an interface associated with a VRF
changes to the up(1) state.
b. When an interface with ifOperStatus = up(1) is
associated with a VRF."
::= { mplsVpnNotifications 1 }
mplsVrfIfDown NOTIFICATION-TYPE
-- OBJECTS {
--
-- mplsVpnInterfaceConfIndex,
-- mplsVpnVrfName
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'. They are not allowed to be included within
-- a notification. This change to the IETF draft was necessary for
-- the MIB to compile. (mpiecuch, 04/30/2002)
--
-- }
STATUS current
DESCRIPTION
"This notification is generated when:
a. The ifOperStatus of an interface associated with a VRF
changes to the down(1) state.
b. When an interface with ifOperStatus = up(1) state is
disassociated with a VRF."
::= { mplsVpnNotifications 2 }
mplsNumVrfRouteMidThreshExceeded NOTIFICATION-TYPE
-- OBJECTS {
--
-- mplsVpnVrfName,
-- mplsVpnVrfPerfCurrNumRoutes
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'. They are not allowed to be included within
-- a notification. This change to the IETF draft was necessary for
-- the MIB to compile. (mpiecuch, 04/30/2002)
--
-- }
STATUS current
DESCRIPTION
"This notification is generated when the number of routes
contained by the specified VRF exceeds the value indicated by
mplsVrfMidRouteThreshold."
::= { mplsVpnNotifications 3 }
mplsNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE
-- OBJECTS {
--
-- mplsVpnVrfName,
-- mplsVpnVrfPerfCurrNumRoutes
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'. They are not allowed to be included within
-- a notification. This change to the IETF draft was necessary for
-- the MIB to compile. (mpiecuch, 04/30/2002)
--
-- }
STATUS current
DESCRIPTION
"This notification is generated when the number of routes
contained by the specified VRF reaches or attempts to exceed
the maximum allowed value as indicated by
mplsVrfMaxRouteThreshold."
::= { mplsVpnNotifications 4 }
mplsNumVrfSecIllegalLabelThreshExceeded NOTIFICATION-TYPE
-- OBJECTS {
--
-- mplsVpnVrfName,
-- mplsVpnVrfSecIllegalLabelViolations
--
-- These objects are auxiliary (INDEX) objects and have MAX-ACCESS
-- of 'not-accessible'. They are not allowed to be included within
-- a notification. This change to the IETF draft was necessary for
-- the MIB to compile. (mpiecuch, 04/30/2002)
--
-- }
STATUS current
DESCRIPTION
"This notification is generated when the number of illegal
label violations on a VRF as indicated by
mplsVpnVrfSecIllegalLabelViolations has exceeded
mplsVpnVrfSecIllegalLabelRcvThresh. The threshold is not
included in the varbind here because the value of
mplsVpnVrfSecIllegalLabelViolations should be one greater than
the threshold at the time this notification is issued."
::= { mplsVpnNotifications 5 }
-- Conformance Statement
mplsVpnGroups
OBJECT IDENTIFIER ::= { mplsVpnConformance 1 }
mplsVpnCompliances
OBJECT IDENTIFIER ::= { mplsVpnConformance 2 }
-- Module Compliance
mplsVpnModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support the
MPLS VPN MIB."
MODULE -- this module
-- The mandatory groups have to be implemented
-- by all LSRs supporting MPLS BGP/VPNs. However,
-- they may all be supported
-- as read-only objects in the case where manual
-- configuration is unsupported.
MANDATORY-GROUPS { mplsVpnScalarGroup,
mplsVpnVrfGroup,
mplsVpnInterfaceGroup,
mplsVpnPerfGroup,
mplsVpnVrfRouteGroup,
mplsVpnVrfBgpNbrGroup,
mplsVpnVrfRouteTargetGroup
}
::= { mplsVpnCompliances 1 }
-- Units of conformance.
mplsVpnScalarGroup OBJECT-GROUP
OBJECTS { mplsVpnConfiguredVrfs,
mplsVpnActiveVrfs,
mplsVpnConnectedInterfaces,
mplsVpnNotificationEnable,
mplsVpnVrfConfMaxPossibleRoutes
}
STATUS current
DESCRIPTION
"Collection of scalar objects required for MPLS VPN
management."
::= { mplsVpnGroups 1 }
mplsVpnVrfGroup OBJECT-GROUP
OBJECTS { mplsVpnVrfDescription,
-- mplsVpnVrfName,
-- Commented out so that MIB would compile (mpiecuch, 04/30/2002)
mplsVpnVrfRouteDistinguisher,
mplsVpnVrfCreationTime,
mplsVpnVrfOperStatus,
mplsVpnVrfActiveInterfaces,
mplsVpnVrfAssociatedInterfaces,
mplsVpnVrfConfMidRouteThreshold,
mplsVpnVrfConfHighRouteThreshold,
mplsVpnVrfConfMaxRoutes,
mplsVpnVrfConfLastChanged,
mplsVpnVrfConfRowStatus,
mplsVpnVrfConfStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS VPN VRF
management."
::= { mplsVpnGroups 2 }
mplsVpnInterfaceGroup OBJECT-GROUP
OBJECTS { mplsVpnInterfaceLabelEdgeType,
-- mplsVpnInterfaceConfIndex,
-- Commented out so that MIB would compile (mpiecuch, 04/30/2002)
mplsVpnInterfaceVpnClassification,
mplsVpnInterfaceVpnRouteDistProtocol,
mplsVpnInterfaceConfStorageType,
mplsVpnInterfaceConfRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS VPN interface
management."
::= { mplsVpnGroups 3 }
mplsVpnPerfGroup OBJECT-GROUP
OBJECTS { mplsVpnVrfPerfRoutesAdded,
mplsVpnVrfPerfRoutesDeleted,
mplsVpnVrfPerfCurrNumRoutes
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS VPN
performance information."
::= { mplsVpnGroups 4 }
mplsVpnVrfBgpNbrGroup OBJECT-GROUP
OBJECTS { mplsVpnVrfBgpNbrRole,
mplsVpnVrfBgpNbrType,
mplsVpnVrfBgpNbrAddr,
mplsVpnVrfBgpNbrRowStatus,
mplsVpnVrfBgpNbrStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS VPN
bgp neighbor-related information."
::= { mplsVpnGroups 5 }
mplsVpnVrfBgpPrefixGroup OBJECT-GROUP
OBJECTS {
mplsVpnVrfBgpPathAttrOrigin,
mplsVpnVrfBgpPathAttrASPathSegment,
mplsVpnVrfBgpPathAttrNextHop,
mplsVpnVrfBgpPathAttrMultiExitDisc,
mplsVpnVrfBgpPathAttrLocalPref,
mplsVpnVrfBgpPathAttrAtomicAggregate,
mplsVpnVrfBgpPathAttrAggregatorAS,
mplsVpnVrfBgpPathAttrAggregatorAddr,
mplsVpnVrfBgpPathAttrCalcLocalPref,
mplsVpnVrfBgpPathAttrBest,
mplsVpnVrfBgpPathAttrUnknown
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS VPN
bgp neighbor-related information."
::= { mplsVpnGroups 6 }
mplsVpnSecGroup OBJECT-GROUP
OBJECTS { mplsVpnVrfSecIllegalLabelViolations,
mplsVpnVrfSecIllegalLabelRcvThresh }
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS VPN
security-related information."
::= { mplsVpnGroups 7 }
mplsVpnVrfRouteGroup OBJECT-GROUP
OBJECTS { mplsVpnVrfRouteDestAddrType,
mplsVpnVrfRouteMaskAddrType,
-- mplsVpnVrfRouteTos,
-- mplsVpnVrfRouteNextHop,
-- Commented out so MIB will compile (mpiecuch, 04/30/2002)
mplsVpnVrfRouteNextHopAddrType,
mplsVpnVrfRouteIfIndex,
mplsVpnVrfRouteType,
mplsVpnVrfRouteProto,
mplsVpnVrfRouteAge,
mplsVpnVrfRouteInfo,
mplsVpnVrfRouteNextHopAS,
mplsVpnVrfRouteMetric1,
mplsVpnVrfRouteMetric2,
mplsVpnVrfRouteMetric3,
mplsVpnVrfRouteMetric4,
mplsVpnVrfRouteMetric5,
mplsVpnVrfRouteRowStatus,
mplsVpnVrfRouteStorageType
}
STATUS current
DESCRIPTION
"Objects required for VRF route table management."
::= { mplsVpnGroups 8 }
mplsVpnVrfRouteTargetGroup OBJECT-GROUP
OBJECTS { mplsVpnVrfRouteTarget,
mplsVpnVrfRouteTargetDescr,
mplsVpnVrfRouteTargetRowStatus
}
STATUS current
DESCRIPTION
"Objects required for VRF route target management."
::= { mplsVpnGroups 9 }
mplsVpnNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { mplsVrfIfUp,
mplsVrfIfDown,
mplsNumVrfRouteMidThreshExceeded,
mplsNumVrfRouteMaxThreshExceeded,
mplsNumVrfSecIllegalLabelThreshExceeded
}
STATUS current
DESCRIPTION
"Objects required for MPLS VPN notifications."
::= { mplsVpnGroups 10 }
-- End of MPLS-VPN-MIB
END
Reference in New Issue Copy Permalink