774 lines
33 KiB
Plaintext
774 lines
33 KiB
Plaintext
|
MSTP-MIB DEFINITIONS ::= BEGIN
|
|||
|
|
|
|||
|
|
IMPORTS
|
|||
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32
|
|||
|
|
FROM SNMPv2-SMI
|
|||
|
|
TruthValue, RowStatus, DisplayString
|
|||
|
|
FROM SNMPv2-TC
|
|||
|
|
TimeTicks
|
|||
|
|
FROM RFC1155-SMI
|
|||
|
|
BridgeId, Timeout, dot1dBridge
|
|||
|
|
FROM BRIDGE-MIB;
|
|||
|
|
--gbnL2 FROM ADMIN-MASTER-MIB;
|
|||
|
|
|
|||
|
|
mstpMib MODULE-IDENTITY
|
|||
|
|
LAST-UPDATED "0412050000Z"
|
|||
|
|
ORGANIZATION "IETF Bridge MIB Working Group"
|
|||
|
|
CONTACT-INFO
|
|||
|
|
"Email: Bridge-mib@ietf.org"
|
|||
|
|
DESCRIPTION
|
|||
|
|
" The Bridge MIB Extension module for managing Sdevices
|
|||
|
|
that support the Multiple Spanning Tree Protocol defined
|
|||
|
|
by IEEE 802.1s."
|
|||
|
|
REVISION "0412050000Z"
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Draft 1"
|
|||
|
|
::= { dot1dBridge 8 }
|
|||
|
|
|
|||
|
|
mstpMIBObjects OBJECT IDENTIFIER ::= { mstpMib 1 }
|
|||
|
|
dot1sStp OBJECT IDENTIFIER ::= { mstpMIBObjects 1 }
|
|||
|
|
|
|||
|
|
dot1sStpName OBJECT-TYPE
|
|||
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The configuration name that identifies the MST
|
|||
|
|
region and is used as one of the inputs in the
|
|||
|
|
computation of the MST Configuration Identifier.
|
|||
|
|
This object does not have any default value."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s clause 13.7"
|
|||
|
|
::= { dot1sStp 1 }
|
|||
|
|
|
|||
|
|
dot1sStpRevision OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (0..65535)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This object identifies the MST revision that
|
|||
|
|
identifies the MST region and is used as one
|
|||
|
|
of the inputs in the computation of the MST
|
|||
|
|
configuration Identifier. This object does not
|
|||
|
|
have any default value."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.7"
|
|||
|
|
::= { dot1sStp 2 }
|
|||
|
|
|
|||
|
|
dot1sStpEnable OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This parameter is used for enabling or disabling
|
|||
|
|
MST globally on all the bridging ports."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
DEFVAL { 2 }
|
|||
|
|
::= { dot1sStp 3 }
|
|||
|
|
|
|||
|
|
dot1sStpBridgeMaxAge OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (6..40)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The value that all bridges use for MaxAge when
|
|||
|
|
this bridge is acting as the root. This parameter
|
|||
|
|
is applicable for all MST Instances including CIST."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.4, 13.23.10"
|
|||
|
|
DEFVAL { 20 }
|
|||
|
|
::= { dot1sStp 4 }
|
|||
|
|
|
|||
|
|
dot1sStpBridgeHelloTime OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (1..10)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The value that all bridges use for HelloTime when
|
|||
|
|
this bridge is acting as the root. This parameter
|
|||
|
|
is applicable for all MST Instances including CIST."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.4, 13.23.10"
|
|||
|
|
DEFVAL { 2 }
|
|||
|
|
::= { dot1sStp 5 }
|
|||
|
|
|
|||
|
|
dot1sStpBridgeForwardDelay OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout (4..30)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The value that all bridges use for ForwardDelay
|
|||
|
|
when this bridge is acting as the root. This parameter
|
|||
|
|
is applicable for all MST Instances including CIST."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.4, 13.23.10"
|
|||
|
|
DEFVAL { 15 }
|
|||
|
|
::= { dot1sStp 6 }
|
|||
|
|
|
|||
|
|
dot1sStpBridgeMaxHops OBJECT-TYPE
|
|||
|
|
SYNTAX Unsigned32 (0..255)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The maximum number of hops that the information for a
|
|||
|
|
particular Spanning Tree instance may traverse (via
|
|||
|
|
relay of BPDUs within the applicable MST region) before
|
|||
|
|
being discarded. This value is used only if this bridge
|
|||
|
|
is the CIST Regional Root and/or the MSTI Regional Root
|
|||
|
|
for one or more Multiple Spanning Tree instances."
|
|||
|
|
DEFVAL { 20 }
|
|||
|
|
::= { dot1sStp 7 }
|
|||
|
|
|
|||
|
|
dot1sStpTxHoldCount OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (1..15)
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The value used by the Port Transmit state machine to
|
|||
|
|
limit the maximum transmission rate of MST BPDUs within
|
|||
|
|
the hello interval."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.22"
|
|||
|
|
DEFVAL { 3 }
|
|||
|
|
::= { dot1sStp 8 }
|
|||
|
|
|
|||
|
|
dot1sStpProtocolSpecification OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
unknown(1),
|
|||
|
|
decLb100(2),
|
|||
|
|
ieee8021d(3),
|
|||
|
|
ieee8021w(4),
|
|||
|
|
ieee8021s(5)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"An indication of what version of the Spanning
|
|||
|
|
Tree Protocol is being run. The value
|
|||
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|||
|
|
Spanning Tree protocol. IEEE 802.1w
|
|||
|
|
implementations will return 'ieee8021w(4)'. IEEE
|
|||
|
|
802.1s implementations will return 'ieee8021s(5). If
|
|||
|
|
future versions of the IEEE Spanning Tree Protocol
|
|||
|
|
are released that are incompatible with the
|
|||
|
|
current version a new value will be defined."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.22"
|
|||
|
|
DEFVAL { 5 }
|
|||
|
|
::= { dot1sStp 9 }
|
|||
|
|
|
|||
|
|
dot1sStpInstTable OBJECT-TYPE
|
|||
|
|
SYNTAX SEQUENCE OF Dot1sStpInstEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A table that contains MST instance-specific
|
|||
|
|
configuration and operational information."
|
|||
|
|
::= { dot1sStp 10 }
|
|||
|
|
|
|||
|
|
dot1sStpInstEntry OBJECT-TYPE
|
|||
|
|
SYNTAX Dot1sStpInstEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A list of information maintained by every mst instance
|
|||
|
|
about the STP topology for that instance."
|
|||
|
|
INDEX { dot1sStpInstId }
|
|||
|
|
::= { dot1sStpInstTable 1 }
|
|||
|
|
|
|||
|
|
Dot1sStpInstEntry ::=
|
|||
|
|
SEQUENCE {
|
|||
|
|
dot1sStpInstId
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpPriority
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpInstTimeSinceTopologyChange
|
|||
|
|
TimeTicks,
|
|||
|
|
dot1sStpInstTopChanges
|
|||
|
|
Counter32,
|
|||
|
|
dot1sStpInstDesignatedRoot
|
|||
|
|
BridgeId,
|
|||
|
|
dot1sStpInstRootCost
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpInstRootPort
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpInstMaxAge
|
|||
|
|
Timeout,
|
|||
|
|
dot1sStpInstHelloTime
|
|||
|
|
Timeout,
|
|||
|
|
dot1sStpInstForwardDelay
|
|||
|
|
Timeout,
|
|||
|
|
dot1sStpInstAdminEnable
|
|||
|
|
TruthValue,
|
|||
|
|
dot1sStpInstOperEnable
|
|||
|
|
TruthValue
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dot1sStpInstId OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (1..64)
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Identifier of this MST Instance"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
::= { dot1sStpInstEntry 1 }
|
|||
|
|
|
|||
|
|
dot1sStpPriority OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (0..61440)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The value of the write-able portion of the Bridge
|
|||
|
|
ID, i.e., the first two octets, out of which the
|
|||
|
|
priority is the most significant 4 bits of the first
|
|||
|
|
octet of the (8 octet long) Bridge ID. The other
|
|||
|
|
(last) 6 octets of the Bridge ID are given by the
|
|||
|
|
value of dot1dBaseBridgeAddress in the BRIDGE-MIB.
|
|||
|
|
The value of this object should always be a multiple
|
|||
|
|
of 4096."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.2"
|
|||
|
|
DEFVAL { 32768 }
|
|||
|
|
::= { dot1sStpInstEntry 2 }
|
|||
|
|
|
|||
|
|
dot1sStpInstTimeSinceTopologyChange OBJECT-TYPE
|
|||
|
|
SYNTAX TimeTicks
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The time (in hundredths of a second) since the
|
|||
|
|
last time a topology change was detected by the
|
|||
|
|
bridge entity running MSTP."
|
|||
|
|
REFERENCE
|
|||
|
|
" IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|||
|
|
::= { dot1sStpInstEntry 3 }
|
|||
|
|
|
|||
|
|
dot1sStpInstTopChanges OBJECT-TYPE
|
|||
|
|
SYNTAX Counter32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The total number of topology changes detected by
|
|||
|
|
this bridge entity running MST since the management
|
|||
|
|
entity was last reset or initialized."
|
|||
|
|
REFERENCE
|
|||
|
|
" IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|||
|
|
::= { dot1sStpInstEntry 4 }
|
|||
|
|
|
|||
|
|
dot1sStpInstDesignatedRoot OBJECT-TYPE
|
|||
|
|
SYNTAX BridgeId
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The bridge identifier of the root of the
|
|||
|
|
corresponding spanning tree instance as determined
|
|||
|
|
by the Spanning Tree Protocol for that instance.
|
|||
|
|
This value is used as the CIST Root Identifier or MSTI
|
|||
|
|
regional root identifier parameter in all MST BPDUs
|
|||
|
|
originated by this node."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.6, 13.23.12"
|
|||
|
|
::= { dot1sStpInstEntry 5 }
|
|||
|
|
|
|||
|
|
dot1sStpInstRootCost OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The cost of the path to the root as seen from
|
|||
|
|
this bridge for this instance."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.6, 13.23.12"
|
|||
|
|
::= { dot1sStpInstEntry 6 }
|
|||
|
|
|
|||
|
|
dot1sStpInstRootPort OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The port number of the port which offers the
|
|||
|
|
lowest cost path from this bridge to the root
|
|||
|
|
bridge for this instance."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.6, 13.23.12"
|
|||
|
|
::= { dot1sStpInstEntry 7 }
|
|||
|
|
|
|||
|
|
dot1sStpInstMaxAge OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The maximum age of Spanning Tree Protocol
|
|||
|
|
information learned from the network on any port
|
|||
|
|
before it is discarded, in units of hundredths of
|
|||
|
|
a second. This is the actual value, which is
|
|||
|
|
advertised by the Root bridge and is currently
|
|||
|
|
used for this MST Instance."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.7, 13.23.13"
|
|||
|
|
::= { dot1sStpInstEntry 8 }
|
|||
|
|
|
|||
|
|
dot1sStpInstHelloTime OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The period of time between the transmission of
|
|||
|
|
MST BPDUs by this node on any port when it is the
|
|||
|
|
root of the spanning tree or trying to become so,
|
|||
|
|
in units of hundredths of a second. This is the actual
|
|||
|
|
value, which is advertised by the Root bridge and is
|
|||
|
|
currently used for this MST Instance."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.7, 13.23.13"
|
|||
|
|
::= { dot1sStpInstEntry 9 }
|
|||
|
|
|
|||
|
|
dot1sStpInstForwardDelay OBJECT-TYPE
|
|||
|
|
SYNTAX Timeout
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This time value, measured in units of hundredths
|
|||
|
|
of a second, controls how fast a port changes its
|
|||
|
|
spanning state when moving towards the Forwarding
|
|||
|
|
state. The value determines how long the port
|
|||
|
|
stays in each of the Discarding and Learning
|
|||
|
|
states, which precede the Forwarding state. This
|
|||
|
|
value is also used, when a topology change has
|
|||
|
|
been detected and is underway, to age all dynamic
|
|||
|
|
entries in the Forwarding Database. [Note that
|
|||
|
|
this value is the one that this bridge is
|
|||
|
|
currently using, in contrast to
|
|||
|
|
dot1sStpBridgeForwardDelay which is the value that
|
|||
|
|
this bridge and all others would start using
|
|||
|
|
if/when this bridge were to become the root.]"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.23.7, 13.23.13"
|
|||
|
|
::= { dot1sStpInstEntry 10 }
|
|||
|
|
|
|||
|
|
dot1sStpInstAdminEnable OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The administrative enabled/disabled status of the
|
|||
|
|
instance"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
DEFVAL { 2 }
|
|||
|
|
::= { dot1sStpInstEntry 11 }
|
|||
|
|
|
|||
|
|
dot1sStpInstOperEnable OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The operational enabled/disabled status of the
|
|||
|
|
instance. An MST Instance may be administratively
|
|||
|
|
enabled but may not be operationally running, for
|
|||
|
|
example, when no VLAN is mapped to that MST Instance."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
DEFVAL { 2 }
|
|||
|
|
::= { dot1sStpInstEntry 12 }
|
|||
|
|
|
|||
|
|
dot1sStpPortTable OBJECT-TYPE
|
|||
|
|
SYNTAX SEQUENCE OF Dot1sStpPortEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A table that contains MSTP ports' information."
|
|||
|
|
::= { dot1sStp 11 }
|
|||
|
|
|
|||
|
|
dot1sStpPortEntry OBJECT-TYPE
|
|||
|
|
SYNTAX Dot1sStpPortEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A list of information maintained by every MST port
|
|||
|
|
about the Spanning Tree Protocol state for that port."
|
|||
|
|
INDEX { dot1sStpPort }
|
|||
|
|
::= { dot1sStpPortTable 1 }
|
|||
|
|
|
|||
|
|
Dot1sStpPortEntry ::=
|
|||
|
|
SEQUENCE {
|
|||
|
|
dot1sStpPort
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpPortAdminEdgePort
|
|||
|
|
TruthValue,
|
|||
|
|
dot1sStpPortAdminPointToPoint
|
|||
|
|
INTEGER,
|
|||
|
|
dot1sStpPortOperEdgePort
|
|||
|
|
TruthValue,
|
|||
|
|
dot1sStpPortOperPointToPoint
|
|||
|
|
TruthValue,
|
|||
|
|
dot1sStpPortExterPathCost
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpVersion
|
|||
|
|
INTEGER,
|
|||
|
|
dot1sStpPortSnoopingEnable
|
|||
|
|
TruthValue
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dot1sStpPort OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (0..65535)
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The port number of the port for which this entry
|
|||
|
|
contains Spanning Tree Protocol management
|
|||
|
|
information."
|
|||
|
|
REFERENCE
|
|||
|
|
" IEEE 802.1s: Section 13.24.21"
|
|||
|
|
::= { dot1sStpPortEntry 1 }
|
|||
|
|
|
|||
|
|
|
|||
|
|
dot1sStpPortAdminEdgePort OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The administrative value of the Edge Port parameter. A
|
|||
|
|
value of TRUE(1) indicates that this port should be
|
|||
|
|
assumed as an edge-port and a value of FALSE(2) indicates
|
|||
|
|
that this port should be assumed as a non-edge-port."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 12.8.2.1.3"
|
|||
|
|
::= { dot1sStpPortEntry 2 }
|
|||
|
|
|
|||
|
|
dot1sStpPortAdminPointToPoint OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
forceTrue(1),
|
|||
|
|
forceFalse(2),
|
|||
|
|
auto(3)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The administrative point-to-point status of the LAN segment
|
|||
|
|
attached to this port. A value of forceTrue(1) indicates that
|
|||
|
|
this port should always be treated as if it is connected to
|
|||
|
|
a point-to-point link. A value of forceFalse(2) indicates
|
|||
|
|
that this port should be treated as having a shared media
|
|||
|
|
connection. A value of auto(3) indicates that this port is
|
|||
|
|
considered to have a point-to-point link if it is an Aggregator
|
|||
|
|
and all of its members are aggregatable, or if the MAC entity
|
|||
|
|
is configured for full duplex operation, either through
|
|||
|
|
auto-negotiation or by management means."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.18"
|
|||
|
|
::= { dot1sStpPortEntry 3 }
|
|||
|
|
|
|||
|
|
dot1sStpPortOperEdgePort OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The operational value of the Edge Port parameter. A
|
|||
|
|
value of TRUE(1) indicates that this port should be
|
|||
|
|
assumed as an edge-port and a value of FALSE(2) indicates
|
|||
|
|
that this port should be assumed as a non-edge-port."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 12.8.2.1.3"
|
|||
|
|
::= { dot1sStpPortEntry 4 }
|
|||
|
|
|
|||
|
|
dot1sStpPortOperPointToPoint OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The operational point-to-point status of the LAN segment
|
|||
|
|
attached to this port. It indicates whether a port is
|
|||
|
|
considered to have a point-to-point connection or not.
|
|||
|
|
The value is determined by management or by auto-detection,
|
|||
|
|
as described in the dot1dStpPortAdminPointToPoint object."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.18"
|
|||
|
|
::= { dot1sStpPortEntry 5 }
|
|||
|
|
|
|||
|
|
dot1sStpPortExterPathCost OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (1..200000000)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The contribution of this port to the path cost of
|
|||
|
|
paths towards the spanning tree root which include
|
|||
|
|
this port. 802.1D-1990 recommends that the
|
|||
|
|
default value of this parameter be in inverse
|
|||
|
|
proportion to the speed of the attached LAN."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.8, 13.24.17"
|
|||
|
|
::= { dot1sStpPortEntry 6 }
|
|||
|
|
|
|||
|
|
dot1sStpVersion OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
stpCompatible(0),
|
|||
|
|
rstp-mstp(2)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The version of Spanning Tree Protocol the bridge is
|
|||
|
|
currently running. The value 'stpCompatible(0)'
|
|||
|
|
indicates the Spanning Tree Protocol specified in
|
|||
|
|
IEEE 802.1D and 'rstp/mstp(2)' indicates the Rapid
|
|||
|
|
Spanning Tree Protocol specified in IEEE 802.1w and
|
|||
|
|
Multiple Spanning Tree Protocol specified in IEEE
|
|||
|
|
802.1s. New value may be defined as future versions
|
|||
|
|
of the protocol become available."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 14.2"
|
|||
|
|
DEFVAL { rstp-mstp }
|
|||
|
|
::= { dot1sStpPortEntry 7 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortTable OBJECT-TYPE
|
|||
|
|
SYNTAX SEQUENCE OF Dot1sStpInstPortEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A table that contains MST port and instance
|
|||
|
|
information."
|
|||
|
|
::= { dot1sStp 12 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortEntry OBJECT-TYPE
|
|||
|
|
SYNTAX Dot1sStpInstPortEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A list of information maintained by every MST port
|
|||
|
|
for each MST instance it belongs to about the Spanning
|
|||
|
|
Tree Protocol state for that port."
|
|||
|
|
INDEX { dot1sStpInstId, dot1sStpPort }
|
|||
|
|
::= { dot1sStpInstPortTable 1 }
|
|||
|
|
|
|||
|
|
Dot1sStpInstPortEntry ::=
|
|||
|
|
SEQUENCE {
|
|||
|
|
dot1sStpInstPortPriority
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpInstPortState
|
|||
|
|
INTEGER,
|
|||
|
|
dot1sStpInstPortPathCost
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpInstPortDesignatedRoot
|
|||
|
|
BridgeId,
|
|||
|
|
dot1sStpInstPortDesignatedCost
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpInstPortDesignatedBridge
|
|||
|
|
BridgeId,
|
|||
|
|
dot1sStpInstPortDesignatedPort
|
|||
|
|
OCTET STRING,
|
|||
|
|
dot1sStpInstPortForwardTransitions
|
|||
|
|
Counter32,
|
|||
|
|
dot1sStpInstPortRole
|
|||
|
|
INTEGER
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dot1sStpInstPortPriority OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (0..240)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The value of the priority field which is
|
|||
|
|
contained in the most significant 4 bits
|
|||
|
|
of the first (in network byte order)
|
|||
|
|
octet of the (2 octet long) Port ID. As it is
|
|||
|
|
contained only in 4 bits, the value has to be
|
|||
|
|
a multiple of 16. The other octet of the Port
|
|||
|
|
ID is given by the value of dot1dStpPort."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.21"
|
|||
|
|
::= { dot1sStpInstPortEntry 1 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortState OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
disabled(1),
|
|||
|
|
discarding(2),
|
|||
|
|
learning(3),
|
|||
|
|
forwarding(4)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The port's current state as defined by
|
|||
|
|
application of the Spanning Tree Protocol. This
|
|||
|
|
state controls what action a port takes on
|
|||
|
|
reception of a frame. For ports which
|
|||
|
|
are disabled (see dot1dStpPortEnable), this object
|
|||
|
|
will have a value of disabled(1)."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.16"
|
|||
|
|
::= { dot1sStpInstPortEntry 2 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortPathCost OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (1..200000000)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The contribution of this port to the path cost of
|
|||
|
|
paths towards the spanning tree root which include
|
|||
|
|
this port. 802.1D-1990 recommends that the
|
|||
|
|
default value of this parameter be in inverse
|
|||
|
|
proportion to the speed of the attached LAN."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.8, 13.24.17"
|
|||
|
|
::= { dot1sStpInstPortEntry 3 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortDesignatedRoot OBJECT-TYPE
|
|||
|
|
SYNTAX BridgeId
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The unique Bridge Identifier of the Bridge
|
|||
|
|
recorded as the Root in the Configuration BPDUs
|
|||
|
|
transmitted by the Designated Bridge for the
|
|||
|
|
segment to which the port is attached."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.4, 13.24.11"
|
|||
|
|
::= { dot1sStpInstPortEntry 4 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortDesignatedCost OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The path cost of the Designated Port of the
|
|||
|
|
segment connected to this port. This value is
|
|||
|
|
compared to the Root Path Cost field in received
|
|||
|
|
bridge PDUs."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.4, 13.24.11"
|
|||
|
|
::= { dot1sStpInstPortEntry 5 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortDesignatedBridge OBJECT-TYPE
|
|||
|
|
SYNTAX BridgeId
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The Bridge Identifier of the bridge which this
|
|||
|
|
port considers to be the Designated Bridge for
|
|||
|
|
this port's segment."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.4, 13.24.11"
|
|||
|
|
::= { dot1sStpInstPortEntry 6 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortDesignatedPort OBJECT-TYPE
|
|||
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The Port Identifier of the port on the Designated
|
|||
|
|
Bridge for this port's segment."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.4, 13.24.11"
|
|||
|
|
::= { dot1sStpInstPortEntry 7 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortForwardTransitions OBJECT-TYPE
|
|||
|
|
SYNTAX Counter32
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The number of times this port has transitioned
|
|||
|
|
from the Learning state to the Forwarding state."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
::= { dot1sStpInstPortEntry 8 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortRole OBJECT-TYPE
|
|||
|
|
SYNTAX INTEGER {
|
|||
|
|
master(0),
|
|||
|
|
alternate-backup(1),
|
|||
|
|
root(2),
|
|||
|
|
designated(3)
|
|||
|
|
}
|
|||
|
|
MAX-ACCESS read-only
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The role of the port. As per IEEE 802.1s, the
|
|||
|
|
port can have any of the following roles:
|
|||
|
|
Disabled, Root, Designated, Alternate, Backup,
|
|||
|
|
Master"
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s: Section 13.24.25"
|
|||
|
|
::= { dot1sStpInstPortEntry 9 }
|
|||
|
|
|
|||
|
|
dot1sStpVlanTable OBJECT-TYPE
|
|||
|
|
SYNTAX SEQUENCE OF Dot1sStpVlanEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A table that contains MSTI-VLAN mapping."
|
|||
|
|
::= { dot1sStp 13 }
|
|||
|
|
|
|||
|
|
dot1sStpVlanEntry OBJECT-TYPE
|
|||
|
|
SYNTAX Dot1sStpVlanEntry
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"A list of information maintained by every MST instance
|
|||
|
|
about the VLANs mapped to that instance."
|
|||
|
|
INDEX { dot1sStpVlanIndex }
|
|||
|
|
::= { dot1sStpVlanTable 1 }
|
|||
|
|
|
|||
|
|
Dot1sStpVlanEntry ::=
|
|||
|
|
SEQUENCE {
|
|||
|
|
dot1sStpVlanIndex
|
|||
|
|
Integer32,
|
|||
|
|
dot1sStpVlanInstId
|
|||
|
|
Integer32
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dot1sStpVlanIndex OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (1..4094)
|
|||
|
|
MAX-ACCESS not-accessible
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This is the primary index to the MSTI-VLAN Table.
|
|||
|
|
It signifies the index to the VLAN range entry in
|
|||
|
|
the table."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
::= { dot1sStpVlanEntry 1 }
|
|||
|
|
|
|||
|
|
dot1sStpVlanInstId OBJECT-TYPE
|
|||
|
|
SYNTAX Integer32 (0..15)
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"The MST Instance value the VLAN mapped to."
|
|||
|
|
REFERENCE
|
|||
|
|
"IEEE 802.1s"
|
|||
|
|
::= { dot1sStpVlanEntry 2 }
|
|||
|
|
|
|||
|
|
dot1sStpPortSnoopingEnable OBJECT-TYPE
|
|||
|
|
SYNTAX TruthValue
|
|||
|
|
MAX-ACCESS read-write
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"This parameter is used for enabling or disabling
|
|||
|
|
digest snooping on the bridge port."
|
|||
|
|
--ʹ<>ܻ<EFBFBD><DCBB>ر<EFBFBD>ժҪ<D5AA><D2AA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
|
::= { dot1sStpPortEntry 8}
|
|||
|
|
|
|||
|
|
dot1sStpTrapTable OBJECT IDENTIFIER ::= { dot1sStp 14 }
|
|||
|
|
|
|||
|
|
dot1sStpTrapEntry OBJECT IDENTIFIER ::= { dot1sStpTrapTable 1 }
|
|||
|
|
|
|||
|
|
dot1sStpInstNewRoot NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { dot1sStpInstDesignatedRoot }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Root bridge changed for the mstp."
|
|||
|
|
::= { dot1sStpTrapEntry 1 }
|
|||
|
|
|
|||
|
|
dot1sStpInstPortForwarding NOTIFICATION-TYPE
|
|||
|
|
OBJECTS { dot1sStpPort }
|
|||
|
|
STATUS current
|
|||
|
|
DESCRIPTION
|
|||
|
|
"Port status is turned from blocking to forwarding."
|
|||
|
|
::= { dot1sStpTrapEntry 2 }
|
|||
|
|
|
|||
|
|
|
|||
|
|
END
|