david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/PIM-MIB

910 lines
28 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
PIM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, experimental,
Integer32, IpAddress, TimeTicks FROM SNMPv2-SMI
RowStatus, TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
ipMRouteGroup, ipMRouteSource,
ipMRouteSourceMask, ipMRouteNextHopGroup,
ipMRouteNextHopSource, ipMRouteNextHopSourceMask,
ipMRouteNextHopIfIndex,
ipMRouteNextHopAddress FROM IPMROUTE-STD-MIB
InterfaceIndex FROM IF-MIB;
pimMIB MODULE-IDENTITY
LAST-UPDATED "9907231200Z" -- July 23, 1999
ORGANIZATION "IETF IDMR Working Group."
CONTACT-INFO
" Dave Thaler
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
US
Phone: +1 425 703 8835
EMail: dthaler@dthaler.microsoft.com"
DESCRIPTION
"The MIB module for management of PIM routers."
REVISION "9907231200Z" -- July 23, 1999
DESCRIPTION
"Initial version, published as RFC xxxx (to be filled in by
RFC-Editor)."
-- ::= { mib-2 xx }
::= { experimental 61 } -- $$$ This value to be changed later !!!
-- NOTE TO RFC EDITOR: When this document is published as an
-- RFC, replace XX with IANA assignment, and delete this comment.
pimMIBObjects OBJECT IDENTIFIER ::= { pimMIB 1 }
pim OBJECT IDENTIFIER ::= { pimMIBObjects 1 }
pimJoinPruneInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default interval at which periodic PIM-SM Join/Prune
messages are to be sent."
::= { pim 1 }
-- The PIM Interface Table
pimInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table."
::= { pim 2 }
pimInterfaceEntry OBJECT-TYPE
SYNTAX PimInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimInterfaceTable."
INDEX { pimInterfaceIfIndex }
::= { pimInterfaceTable 1 }
PimInterfaceEntry ::= SEQUENCE {
pimInterfaceIfIndex InterfaceIndex,
pimInterfaceAddress IpAddress,
pimInterfaceNetMask IpAddress,
pimInterfaceMode INTEGER,
pimInterfaceDR IpAddress,
pimInterfaceHelloInterval Integer32,
pimInterfaceStatus RowStatus,
pimInterfaceJoinPruneInterval Integer32,
pimInterfaceCBSRPreference Integer32
}
pimInterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of this PIM interface."
::= { pimInterfaceEntry 1 }
pimInterfaceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the PIM interface."
::= { pimInterfaceEntry 2 }
pimInterfaceNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The network mask for the IP address of the PIM interface."
::= { pimInterfaceEntry 3 }
pimInterfaceMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1."
DEFVAL { dense }
::= { pimInterfaceEntry 4 }
pimInterfaceDR OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Designated Router on this PIM interface. For point-
to-point interfaces, this object has the value 0.0.0.0."
::= { pimInterfaceEntry 5 }
pimInterfaceHelloInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency at which PIM Hello messages are transmitted
on this interface."
DEFVAL { 30 }
::= { pimInterfaceEntry 6 }
pimInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface."
::= { pimInterfaceEntry 7 }
pimInterfaceJoinPruneInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the pimJoinPruneInterval."
::= { pimInterfaceEntry 8 }
pimInterfaceCBSRPreference OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface."
DEFVAL { 0 }
::= { pimInterfaceEntry 9 }
-- The PIM Neighbor Table
pimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's PIM neighbors."
::= { pim 3 }
pimNeighborEntry OBJECT-TYPE
SYNTAX PimNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimNeighborTable."
INDEX { pimNeighborAddress }
::= { pimNeighborTable 1 }
PimNeighborEntry ::= SEQUENCE {
pimNeighborAddress IpAddress,
pimNeighborIfIndex InterfaceIndex,
pimNeighborUpTime TimeTicks,
pimNeighborExpiryTime TimeTicks,
pimNeighborMode INTEGER
}
pimNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the PIM neighbor for which this entry
contains information."
::= { pimNeighborEntry 1 }
pimNeighborIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface used to reach this
PIM neighbor."
::= { pimNeighborEntry 2 }
pimNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor
of the local router."
::= { pimNeighborEntry 3 }
pimNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before this PIM neighbor will be
aged out."
::= { pimNeighborEntry 4 }
pimNeighborMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protocol running on the interface."
::= { pimNeighborEntry 5 }
--
-- The PIM IP Multicast Route Table
--
pimIpMRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB."
::= { pim 4 }
pimIpMRouteEntry OBJECT-TYPE
SYNTAX PimIpMRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM."
INDEX { ipMRouteGroup, ipMRouteSource, ipMRouteSourceMask }
::= { pimIpMRouteTable 1 }
PimIpMRouteEntry ::= SEQUENCE {
pimIpMRouteUpstreamAssertTimer TimeTicks,
pimIpMRouteAssertMetric Integer32,
pimIpMRouteAssertMetricPref Integer32,
pimIpMRouteAssertRPTBit TruthValue,
pimIpMRouteFlags BITS
}
pimIpMRouteUpstreamAssertTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert has changed the
upstream neighbor away from the RPF neighbor."
::= { pimIpMRouteEntry 1 }
pimIpMRouteAssertMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received."
::= { pimIpMRouteEntry 2 }
pimIpMRouteAssertMetricPref OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect."
::= { pimIpMRouteEntry 3 }
pimIpMRouteAssertRPTBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect."
::= { pimIpMRouteEntry 4 }
pimIpMRouteFlags OBJECT-TYPE
SYNTAX BITS {
rpt(0),
spt(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits."
::= { pimIpMRouteEntry 5 }
--
-- The PIM Next Hop Table
--
pimIpMRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimIpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB."
::= { pim 7 }
pimIpMRouteNextHopEntry OBJECT-TYPE
SYNTAX PimIpMRouteNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1)."
INDEX { ipMRouteNextHopGroup, ipMRouteNextHopSource,
ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex,
ipMRouteNextHopAddress }
::= { pimIpMRouteNextHopTable 1 }
PimIpMRouteNextHopEntry ::= SEQUENCE {
pimIpMRouteNextHopPruneReason INTEGER
}
pimIpMRouteNextHopPruneReason OBJECT-TYPE
SYNTAX INTEGER {
other (1),
prune (2),
assert (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing."
::= { pimIpMRouteNextHopEntry 2 }
-- The PIM RP Table
pimRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimRPEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing PIM version 1 information
for the Rendezvous Points (RPs) for IP multicast groups.
This table is deprecated since its function is replaced by
the pimRPSetTable for PIM version 2."
::= { pim 5 }
pimRPEntry OBJECT-TYPE
SYNTAX PimRPEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) in the pimRPTable. There is one
entry per RP address for each IP multicast group."
INDEX { pimRPGroupAddress, pimRPAddress }
::= { pimRPTable 1 }
PimRPEntry ::= SEQUENCE {
pimRPGroupAddress IpAddress,
pimRPAddress IpAddress,
pimRPState INTEGER,
pimRPStateTimer TimeTicks,
pimRPLastChange TimeTicks,
pimRPRowStatus RowStatus
}
pimRPGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The IP multicast group address for which this entry
contains information about an RP."
::= { pimRPEntry 1 }
pimRPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The unicast address of the RP."
::= { pimRPEntry 2 }
pimRPState OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The state of the RP."
::= { pimRPEntry 3 }
pimRPStateTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum time remaining before the next state change.
When pimRPState is up, this is the minimum time which must
expire until it can be declared down. When pimRPState is
down, this is the time until it will be declared up (in
order to retry)."
::= { pimRPEntry 4 }
pimRPLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of sysUpTime at the time when the corresponding
instance of pimRPState last changed its value."
::= { pimRPEntry 5 }
pimRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { pimRPEntry 6 }
-- The PIM RP-Set Table
pimRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements. When
the local router is not the BSR, this information is
obtained from received RP-Set messages."
::= { pim 6 }
pimRPSetEntry OBJECT-TYPE
SYNTAX PimRPSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimRPSetTable."
INDEX { pimRPSetComponent, pimRPSetGroupAddress,
pimRPSetGroupMask, pimRPSetAddress }
::= { pimRPSetTable 1 }
PimRPSetEntry ::= SEQUENCE {
pimRPSetGroupAddress IpAddress,
pimRPSetGroupMask IpAddress,
pimRPSetAddress IpAddress,
pimRPSetHoldTime Integer32,
pimRPSetExpiryTime TimeTicks,
pimRPSetComponent Integer32
}
pimRPSetGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
pimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { pimRPSetEntry 1 }
pimRPSetGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address mask which, when combined with
pimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { pimRPSetEntry 2 }
pimRPSetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the Candidate-RP."
::= { pimRPSetEntry 3 }
pimRPSetHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The holdtime of a Candidate-RP. If the local router is not
the BSR, this value is 0."
::= { pimRPSetEntry 4 }
pimRPSetExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before the Candidate-RP will be
declared down. If the local router is not the BSR, this
value is 0."
::= { pimRPSetEntry 5 }
pimRPSetComponent OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A number uniquely identifying the component. Each
protocol instance connected to a separate domain should have
a different index value."
::= { pimRPSetEntry 6 }
-- The PIM Candidate-RP Table
pimCandidateRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of pimComponentCRPHoldTime is
non-zero. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of pimComponentCRPHoldTime is non-
zero)."
::= { pim 11 }
pimCandidateRPEntry OBJECT-TYPE
SYNTAX PimCandidateRPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimCandidateRPTable."
INDEX { pimCandidateRPGroupAddress,
pimCandidateRPGroupMask }
::= { pimCandidateRPTable 1 }
PimCandidateRPEntry ::= SEQUENCE {
pimCandidateRPGroupAddress IpAddress,
pimCandidateRPGroupMask IpAddress,
pimCandidateRPAddress IpAddress,
pimCandidateRPRowStatus RowStatus
}
pimCandidateRPGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address which, when combined with
pimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { pimCandidateRPEntry 1 }
pimCandidateRPGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The multicast group address mask which, when combined with
pimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { pimCandidateRPEntry 2 }
pimCandidateRPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (unicast) address of the interface which will be
advertised as a Candidate-RP."
::= { pimCandidateRPEntry 3 }
pimCandidateRPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { pimCandidateRPEntry 4 }
-- The PIM Component Table
pimComponentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PimComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing objects specific to a PIM
domain. One row exists for each domain to which the router
is connected. A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain. This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them."
::= { pim 12 }
pimComponentEntry OBJECT-TYPE
SYNTAX PimComponentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the pimComponentTable."
INDEX { pimComponentIndex }
::= { pimComponentTable 1 }
PimComponentEntry ::= SEQUENCE {
pimComponentIndex Integer32,
pimComponentBSRAddress IpAddress,
pimComponentBSRExpiryTime TimeTicks,
pimComponentCRPHoldTime Integer32,
pimComponentStatus RowStatus
}
pimComponentIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying the component. Each protocol
instance connected to a separate domain should have a
different index value. Routers that only support membership
in a single PIM-SM domain should use a pimComponentIndex
value of 1."
::= { pimComponentEntry 1 }
pimComponentBSRAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the bootstrap router (BSR) for the local
PIM region."
::= { pimComponentEntry 2 }
pimComponentBSRExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum time remaining before the bootstrap router in
the local domain will be declared down. For candidate BSRs,
this is the time until the component sends an RP-Set
message. For other routers, this is the time until it may
accept an RP-Set message from a lower candidate BSR."
::= { pimComponentEntry 3 }
pimComponentCRPHoldTime OBJECT-TYPE
SYNTAX Integer32 (0..255)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The holdtime of the component when it is a candidate RP in
the local domain. The value of 0 is used to indicate that
the local system is not a Candidate-RP."
DEFVAL { 0 }
::= { pimComponentEntry 4 }
pimComponentStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this entry. Creating the entry creates
another protocol instance; destroying the entry disables a
protocol instance."
::= { pimComponentEntry 5 }
-- conformance information
pimMIBConformance OBJECT IDENTIFIER ::= { pimMIB 2 }
pimMIBCompliances OBJECT IDENTIFIER ::= { pimMIBConformance 1 }
pimMIBGroups OBJECT IDENTIFIER ::= { pimMIBConformance 2 }
-- compliance statements
pimV1MIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for routers running PIMv1 and
implementing the PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { pimV1MIBGroup }
::= { pimMIBCompliances 1 }
pimSparseV2MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running PIM Sparse
Mode and implementing the PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { pimV2MIBGroup }
GROUP pimV2CandidateRPMIBGroup
DESCRIPTION
"This group is mandatory if the router is capable of being a
Candidate RP."
OBJECT pimInterfaceStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pimMIBCompliances 2 }
pimDenseV2MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running PIM Dense Mode
and implementing the PIM MIB."
MODULE -- this module
MANDATORY-GROUPS { pimDenseV2MIBGroup }
OBJECT pimInterfaceStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { pimMIBCompliances 3 }
-- units of conformance
pimV2MIBGroup OBJECT-GROUP
OBJECTS { pimJoinPruneInterval, pimNeighborIfIndex,
pimNeighborUpTime, pimNeighborExpiryTime,
pimInterfaceAddress, pimInterfaceNetMask,
pimInterfaceDR, pimInterfaceHelloInterval,
pimInterfaceStatus, pimInterfaceJoinPruneInterval,
pimInterfaceCBSRPreference, pimInterfaceMode,
pimRPSetHoldTime, pimRPSetExpiryTime,
pimComponentBSRAddress, pimComponentBSRExpiryTime,
pimComponentCRPHoldTime, pimComponentStatus,
pimIpMRouteFlags, pimIpMRouteUpstreamAssertTimer
}
STATUS current
DESCRIPTION
"A collection of objects to support management of PIM Sparse
Mode (version 2) routers."
::= { pimMIBGroups 2 }
pimDenseV2MIBGroup OBJECT-GROUP
OBJECTS { pimNeighborIfIndex,
pimNeighborUpTime, pimNeighborExpiryTime,
pimInterfaceAddress, pimInterfaceNetMask,
pimInterfaceDR, pimInterfaceHelloInterval,
pimInterfaceStatus, pimInterfaceMode
}
STATUS current
DESCRIPTION
"A collection of objects to support management of PIM Dense
Mode (version 2) routers."
::= { pimMIBGroups 5 }
pimV2CandidateRPMIBGroup OBJECT-GROUP
OBJECTS { pimCandidateRPAddress,
pimCandidateRPRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to support configuration of which
groups a router is to advertise itself as a Candidate-RP."
::= { pimMIBGroups 3 }
pimV1MIBGroup OBJECT-GROUP
OBJECTS { pimJoinPruneInterval, pimNeighborIfIndex,
pimNeighborUpTime, pimNeighborExpiryTime,
pimNeighborMode,
pimInterfaceAddress, pimInterfaceNetMask,
pimInterfaceJoinPruneInterval, pimInterfaceStatus,
pimInterfaceMode, pimInterfaceDR,
pimInterfaceHelloInterval,
pimRPState, pimRPStateTimer,
pimRPLastChange, pimRPRowStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects to support management of PIM
(version 1) routers."
::= { pimMIBGroups 4 }
pimNextHopGroup OBJECT-GROUP
OBJECTS { pimIpMRouteNextHopPruneReason }
STATUS current
DESCRIPTION
"A collection of optional objects to provide per-next hop
information for diagnostic purposes. Supporting this group
may add a large number of instances to a tree walk, but the
information in this group can be extremely useful in
tracking down multicast connectivity problems."
::= { pimMIBGroups 6 }
pimAssertGroup OBJECT-GROUP
OBJECTS { pimIpMRouteAssertMetric, pimIpMRouteAssertMetricPref,
pimIpMRouteAssertRPTBit }
STATUS current
DESCRIPTION
"A collection of optional objects to provide extra
information about the assert election process. There is no
protocol reason to keep such information, but some
implementations may already keep this information and make
it available. These objects can also be very useful in
debugging connectivity or duplicate packet problems,
especially if the assert winner does not support the PIM and
IP Multicast MIBs."
::= { pimMIBGroups 7 }
END
Reference in New Issue Copy Permalink