3981 lines
144 KiB
Plaintext
3981 lines
144 KiB
Plaintext
|
RMON-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
|
||
|
|
NOTIFICATION-TYPE, mib-2, Counter32,
|
||
|
|
Integer32, TimeTicks FROM SNMPv2-SMI
|
||
|
|
|
||
|
|
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC
|
||
|
|
|
||
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
||
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF;
|
||
|
|
|
||
|
|
-- Remote Network Monitoring MIB
|
||
|
|
|
||
|
|
rmonMibModule MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200005110000Z" -- 11 May, 2000
|
||
|
|
ORGANIZATION "IETF RMON MIB Working Group"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Steve Waldbusser
|
||
|
|
Phone: +1-650-948-6500
|
||
|
|
Fax: +1-650-745-0671
|
||
|
|
Email: waldbusser@nextbeacon.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"Remote network monitoring devices, often called
|
||
|
|
monitors or probes, are instruments that exist for
|
||
|
|
the purpose of managing a network. This MIB defines
|
||
|
|
objects for managing remote network monitoring devices."
|
||
|
|
|
||
|
|
REVISION "200005110000Z" -- 11 May, 2000
|
||
|
|
DESCRIPTION
|
||
|
|
"Reformatted into SMIv2 format.
|
||
|
|
|
||
|
|
This version published as RFC 2819."
|
||
|
|
|
||
|
|
REVISION "199502010000Z" -- 1 Feb, 1995
|
||
|
|
DESCRIPTION
|
||
|
|
"Bug fixes, clarifications and minor changes based on
|
||
|
|
implementation experience, published as RFC1757 [18].
|
||
|
|
|
||
|
|
Two changes were made to object definitions:
|
||
|
|
|
||
|
|
1) A new status bit has been defined for the
|
||
|
|
captureBufferPacketStatus object, indicating that the
|
||
|
|
packet order within the capture buffer may not be identical to
|
||
|
|
the packet order as received off the wire. This bit may only
|
||
|
|
|
||
|
|
be used for packets transmitted by the probe. Older NMS
|
||
|
|
applications can safely ignore this status bit, which might be
|
||
|
|
used by newer agents.
|
||
|
|
|
||
|
|
2) The packetMatch trap has been removed. This trap was never
|
||
|
|
actually 'approved' and was not added to this document along
|
||
|
|
with the risingAlarm and fallingAlarm traps. The packetMatch
|
||
|
|
trap could not be throttled, which could cause disruption of
|
||
|
|
normal network traffic under some circumstances. An NMS should
|
||
|
|
configure a risingAlarm threshold on the appropriate
|
||
|
|
channelMatches instance if a trap is desired for a packetMatch
|
||
|
|
event. Note that logging of packetMatch events is still
|
||
|
|
supported--only trap generation for such events has been
|
||
|
|
removed.
|
||
|
|
|
||
|
|
In addition, several clarifications to individual object
|
||
|
|
definitions have been added to assist agent and NMS
|
||
|
|
implementors:
|
||
|
|
|
||
|
|
- global definition of 'good packets' and 'bad packets'
|
||
|
|
|
||
|
|
- more detailed text governing conceptual row creation and
|
||
|
|
modification
|
||
|
|
|
||
|
|
- instructions for probes relating to interface changes and
|
||
|
|
disruptions
|
||
|
|
|
||
|
|
- clarification of some ethernet counter definitions
|
||
|
|
|
||
|
|
- recommended formula for calculating network utilization
|
||
|
|
|
||
|
|
- clarification of channel and captureBuffer behavior for some
|
||
|
|
unusual conditions
|
||
|
|
|
||
|
|
- examples of proper instance naming for each table"
|
||
|
|
|
||
|
|
REVISION "199111010000Z" -- 1 Nov, 1991
|
||
|
|
DESCRIPTION
|
||
|
|
"The original version of this MIB, published as RFC1271."
|
||
|
|
::= { rmonConformance 8 }
|
||
|
|
|
||
|
|
rmon OBJECT IDENTIFIER ::= { mib-2 16 }
|
||
|
|
|
||
|
|
-- textual conventions
|
||
|
|
|
||
|
|
OwnerString ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This data type is used to model an administratively
|
||
|
|
assigned name of the owner of a resource. Implementations
|
||
|
|
must accept values composed of well-formed NVT ASCII
|
||
|
|
sequences. In addition, implementations should accept
|
||
|
|
values composed of well-formed UTF-8 sequences.
|
||
|
|
|
||
|
|
It is suggested that this name contain one or more of
|
||
|
|
the following: IP address, management station name,
|
||
|
|
network manager's name, location, or phone number.
|
||
|
|
In some cases the agent itself will be the owner of
|
||
|
|
an entry. In these cases, this string shall be set
|
||
|
|
to a string starting with 'monitor'.
|
||
|
|
|
||
|
|
SNMP access control is articulated entirely in terms
|
||
|
|
of the contents of MIB views; access to a particular
|
||
|
|
SNMP object instance depends only upon its presence
|
||
|
|
or absence in a particular MIB view and never upon
|
||
|
|
its value or the value of related object instances.
|
||
|
|
Thus, objects of this type afford resolution of
|
||
|
|
resource contention only among cooperating
|
||
|
|
managers; they realize no access control function
|
||
|
|
with respect to uncooperative parties."
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
||
|
|
|
||
|
|
EntryStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of a table entry.
|
||
|
|
|
||
|
|
Setting this object to the value invalid(4) has the
|
||
|
|
effect of invalidating the corresponding entry.
|
||
|
|
That is, it effectively disassociates the mapping
|
||
|
|
identified with said entry.
|
||
|
|
It is an implementation-specific matter as to whether
|
||
|
|
the agent removes an invalidated entry from the table.
|
||
|
|
Accordingly, management stations must be prepared to
|
||
|
|
receive tabular information from agents that corresponds
|
||
|
|
to entries currently not in use. Proper
|
||
|
|
interpretation of such entries requires examination
|
||
|
|
of the relevant EntryStatus object.
|
||
|
|
|
||
|
|
An existing instance of this object cannot be set to
|
||
|
|
createRequest(2). This object may only be set to
|
||
|
|
createRequest(2) when this instance is created. When
|
||
|
|
this object is created, the agent may wish to create
|
||
|
|
supplemental object instances with default values
|
||
|
|
to complete a conceptual row in this table. Because the
|
||
|
|
|
||
|
|
creation of these default objects is entirely at the option
|
||
|
|
of the agent, the manager must not assume that any will be
|
||
|
|
created, but may make use of any that are created.
|
||
|
|
Immediately after completing the create operation, the agent
|
||
|
|
must set this object to underCreation(3).
|
||
|
|
|
||
|
|
When in the underCreation(3) state, an entry is allowed to
|
||
|
|
exist in a possibly incomplete, possibly inconsistent state,
|
||
|
|
usually to allow it to be modified in multiple PDUs. When in
|
||
|
|
this state, an entry is not fully active.
|
||
|
|
Entries shall exist in the underCreation(3) state until
|
||
|
|
the management station is finished configuring the entry
|
||
|
|
and sets this object to valid(1) or aborts, setting this
|
||
|
|
object to invalid(4). If the agent determines that an
|
||
|
|
entry has been in the underCreation(3) state for an
|
||
|
|
abnormally long time, it may decide that the management
|
||
|
|
station has crashed. If the agent makes this decision,
|
||
|
|
it may set this object to invalid(4) to reclaim the
|
||
|
|
entry. A prudent agent will understand that the
|
||
|
|
management station may need to wait for human input
|
||
|
|
and will allow for that possibility in its
|
||
|
|
determination of this abnormally long period.
|
||
|
|
|
||
|
|
An entry in the valid(1) state is fully configured and
|
||
|
|
consistent and fully represents the configuration or
|
||
|
|
operation such a row is intended to represent. For
|
||
|
|
example, it could be a statistical function that is
|
||
|
|
configured and active, or a filter that is available
|
||
|
|
in the list of filters processed by the packet capture
|
||
|
|
process.
|
||
|
|
|
||
|
|
A manager is restricted to changing the state of an entry in
|
||
|
|
the following ways:
|
||
|
|
|
||
|
|
To: valid createRequest underCreation invalid
|
||
|
|
From:
|
||
|
|
valid OK NO OK OK
|
||
|
|
createRequest N/A N/A N/A N/A
|
||
|
|
underCreation OK NO OK OK
|
||
|
|
invalid NO NO NO OK
|
||
|
|
nonExistent NO OK NO OK
|
||
|
|
|
||
|
|
In the table above, it is not applicable to move the state
|
||
|
|
from the createRequest state to any other state because the
|
||
|
|
manager will never find the variable in that state. The
|
||
|
|
nonExistent state is not a value of the enumeration, rather
|
||
|
|
it means that the entryStatus variable does not exist at all.
|
||
|
|
|
||
|
|
An agent may allow an entryStatus variable to change state in
|
||
|
|
additional ways, so long as the semantics of the states are
|
||
|
|
followed. This allowance is made to ease the implementation of
|
||
|
|
the agent and is made despite the fact that managers should
|
||
|
|
never exercise these additional state transitions."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
valid(1),
|
||
|
|
createRequest(2),
|
||
|
|
underCreation(3),
|
||
|
|
invalid(4)
|
||
|
|
}
|
||
|
|
|
||
|
|
statistics OBJECT IDENTIFIER ::= { rmon 1 }
|
||
|
|
history OBJECT IDENTIFIER ::= { rmon 2 }
|
||
|
|
alarm OBJECT IDENTIFIER ::= { rmon 3 }
|
||
|
|
hosts OBJECT IDENTIFIER ::= { rmon 4 }
|
||
|
|
hostTopN OBJECT IDENTIFIER ::= { rmon 5 }
|
||
|
|
matrix OBJECT IDENTIFIER ::= { rmon 6 }
|
||
|
|
filter OBJECT IDENTIFIER ::= { rmon 7 }
|
||
|
|
capture OBJECT IDENTIFIER ::= { rmon 8 }
|
||
|
|
event OBJECT IDENTIFIER ::= { rmon 9 }
|
||
|
|
rmonConformance OBJECT IDENTIFIER ::= { rmon 20 }
|
||
|
|
|
||
|
|
-- The Ethernet Statistics Group
|
||
|
|
--
|
||
|
|
-- Implementation of the Ethernet Statistics group is optional.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The ethernet statistics group contains statistics measured by the
|
||
|
|
-- probe for each monitored interface on this device. These
|
||
|
|
-- statistics take the form of free running counters that start from
|
||
|
|
-- zero when a valid entry is created.
|
||
|
|
--
|
||
|
|
-- This group currently has statistics defined only for
|
||
|
|
-- Ethernet interfaces. Each etherStatsEntry contains statistics
|
||
|
|
-- for one Ethernet interface. The probe must create one
|
||
|
|
-- etherStats entry for each monitored Ethernet interface
|
||
|
|
-- on the device.
|
||
|
|
|
||
|
|
etherStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EtherStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of Ethernet statistics entries."
|
||
|
|
::= { statistics 1 }
|
||
|
|
|
||
|
|
etherStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX EtherStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of statistics kept for a particular
|
||
|
|
Ethernet interface. As an example, an instance of the
|
||
|
|
etherStatsPkts object might be named etherStatsPkts.1"
|
||
|
|
INDEX { etherStatsIndex }
|
||
|
|
::= { etherStatsTable 1 }
|
||
|
|
|
||
|
|
EtherStatsEntry ::= SEQUENCE {
|
||
|
|
etherStatsIndex Integer32,
|
||
|
|
etherStatsDataSource OBJECT IDENTIFIER,
|
||
|
|
etherStatsDropEvents Counter32,
|
||
|
|
etherStatsOctets Counter32,
|
||
|
|
etherStatsPkts Counter32,
|
||
|
|
etherStatsBroadcastPkts Counter32,
|
||
|
|
etherStatsMulticastPkts Counter32,
|
||
|
|
etherStatsCRCAlignErrors Counter32,
|
||
|
|
etherStatsUndersizePkts Counter32,
|
||
|
|
etherStatsOversizePkts Counter32,
|
||
|
|
etherStatsFragments Counter32,
|
||
|
|
etherStatsJabbers Counter32,
|
||
|
|
etherStatsCollisions Counter32,
|
||
|
|
etherStatsPkts64Octets Counter32,
|
||
|
|
etherStatsPkts65to127Octets Counter32,
|
||
|
|
etherStatsPkts128to255Octets Counter32,
|
||
|
|
etherStatsPkts256to511Octets Counter32,
|
||
|
|
etherStatsPkts512to1023Octets Counter32,
|
||
|
|
etherStatsPkts1024to1518Octets Counter32,
|
||
|
|
etherStatsOwner OwnerString,
|
||
|
|
etherStatsStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
etherStatsIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object uniquely identifies this
|
||
|
|
etherStats entry."
|
||
|
|
::= { etherStatsEntry 1 }
|
||
|
|
|
||
|
|
etherStatsDataSource OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the source of the data that
|
||
|
|
this etherStats entry is configured to analyze. This
|
||
|
|
source can be any ethernet interface on this device.
|
||
|
|
In order to identify a particular interface, this object
|
||
|
|
shall identify the instance of the ifIndex object,
|
||
|
|
defined in RFC 2233 [17], for the desired interface.
|
||
|
|
For example, if an entry were to receive data from
|
||
|
|
interface #1, this object would be set to ifIndex.1.
|
||
|
|
|
||
|
|
The statistics in this group reflect all packets
|
||
|
|
on the local network segment attached to the identified
|
||
|
|
interface.
|
||
|
|
|
||
|
|
An agent may or may not be able to tell if fundamental
|
||
|
|
changes to the media of the interface have occurred and
|
||
|
|
necessitate an invalidation of this entry. For example, a
|
||
|
|
hot-pluggable ethernet card could be pulled out and replaced
|
||
|
|
by a token-ring card. In such a case, if the agent has such
|
||
|
|
knowledge of the change, it is recommended that it
|
||
|
|
invalidate this entry.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
etherStatsStatus object is equal to valid(1)."
|
||
|
|
::= { etherStatsEntry 2 }
|
||
|
|
|
||
|
|
etherStatsDropEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of events in which packets
|
||
|
|
were dropped by the probe due to lack of resources.
|
||
|
|
Note that this number is not necessarily the number of
|
||
|
|
packets dropped; it is just the number of times this
|
||
|
|
condition has been detected."
|
||
|
|
::= { etherStatsEntry 3 }
|
||
|
|
|
||
|
|
etherStatsOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets of data (including
|
||
|
|
those in bad packets) received on the
|
||
|
|
network (excluding framing bits but including
|
||
|
|
FCS octets).
|
||
|
|
|
||
|
|
This object can be used as a reasonable estimate of
|
||
|
|
10-Megabit ethernet utilization. If greater precision is
|
||
|
|
desired, the etherStatsPkts and etherStatsOctets objects
|
||
|
|
should be sampled before and after a common interval. The
|
||
|
|
differences in the sampled values are Pkts and Octets,
|
||
|
|
respectively, and the number of seconds in the interval is
|
||
|
|
Interval. These values are used to calculate the Utilization
|
||
|
|
as follows:
|
||
|
|
|
||
|
|
Pkts * (9.6 + 6.4) + (Octets * .8)
|
||
|
|
Utilization = -------------------------------------
|
||
|
|
Interval * 10,000
|
||
|
|
|
||
|
|
The result of this equation is the value Utilization which
|
||
|
|
is the percent utilization of the ethernet segment on a
|
||
|
|
scale of 0 to 100 percent."
|
||
|
|
::= { etherStatsEntry 4 }
|
||
|
|
|
||
|
|
etherStatsPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad packets,
|
||
|
|
broadcast packets, and multicast packets) received."
|
||
|
|
::= { etherStatsEntry 5 }
|
||
|
|
|
||
|
|
etherStatsBroadcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of good packets received that were
|
||
|
|
directed to the broadcast address. Note that this
|
||
|
|
does not include multicast packets."
|
||
|
|
::= { etherStatsEntry 6 }
|
||
|
|
|
||
|
|
etherStatsMulticastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of good packets received that were
|
||
|
|
directed to a multicast address. Note that this number
|
||
|
|
does not include packets directed to the broadcast
|
||
|
|
|
||
|
|
address."
|
||
|
|
::= { etherStatsEntry 7 }
|
||
|
|
|
||
|
|
etherStatsCRCAlignErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that
|
||
|
|
had a length (excluding framing bits, but
|
||
|
|
including FCS octets) of between 64 and 1518
|
||
|
|
octets, inclusive, but had either a bad
|
||
|
|
Frame Check Sequence (FCS) with an integral
|
||
|
|
number of octets (FCS Error) or a bad FCS with
|
||
|
|
a non-integral number of octets (Alignment Error)."
|
||
|
|
::= { etherStatsEntry 8 }
|
||
|
|
|
||
|
|
etherStatsUndersizePkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were
|
||
|
|
less than 64 octets long (excluding framing bits,
|
||
|
|
but including FCS octets) and were otherwise well
|
||
|
|
formed."
|
||
|
|
::= { etherStatsEntry 9 }
|
||
|
|
|
||
|
|
etherStatsOversizePkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were
|
||
|
|
longer than 1518 octets (excluding framing bits,
|
||
|
|
but including FCS octets) and were otherwise
|
||
|
|
well formed."
|
||
|
|
::= { etherStatsEntry 10 }
|
||
|
|
|
||
|
|
etherStatsFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were less than
|
||
|
|
64 octets in length (excluding framing bits but including
|
||
|
|
FCS octets) and had either a bad Frame Check Sequence
|
||
|
|
(FCS) with an integral number of octets (FCS Error) or a
|
||
|
|
bad FCS with a non-integral number of octets (Alignment
|
||
|
|
Error).
|
||
|
|
|
||
|
|
Note that it is entirely normal for etherStatsFragments to
|
||
|
|
increment. This is because it counts both runts (which are
|
||
|
|
normal occurrences due to collisions) and noise hits."
|
||
|
|
::= { etherStatsEntry 11 }
|
||
|
|
|
||
|
|
etherStatsJabbers OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received that were
|
||
|
|
longer than 1518 octets (excluding framing bits,
|
||
|
|
but including FCS octets), and had either a bad
|
||
|
|
Frame Check Sequence (FCS) with an integral number
|
||
|
|
of octets (FCS Error) or a bad FCS with a non-integral
|
||
|
|
number of octets (Alignment Error).
|
||
|
|
|
||
|
|
Note that this definition of jabber is different
|
||
|
|
than the definition in IEEE-802.3 section 8.2.1.5
|
||
|
|
(10BASE5) and section 10.3.1.4 (10BASE2). These
|
||
|
|
documents define jabber as the condition where any
|
||
|
|
packet exceeds 20 ms. The allowed range to detect
|
||
|
|
jabber is between 20 ms and 150 ms."
|
||
|
|
::= { etherStatsEntry 12 }
|
||
|
|
|
||
|
|
etherStatsCollisions OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Collisions"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The best estimate of the total number of collisions
|
||
|
|
on this Ethernet segment.
|
||
|
|
|
||
|
|
The value returned will depend on the location of the
|
||
|
|
RMON probe. Section 8.2.1.3 (10BASE-5) and section
|
||
|
|
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
|
||
|
|
station must detect a collision, in the receive mode, if
|
||
|
|
three or more stations are transmitting simultaneously. A
|
||
|
|
repeater port must detect a collision when two or more
|
||
|
|
|
||
|
|
stations are transmitting simultaneously. Thus a probe
|
||
|
|
placed on a repeater port could record more collisions
|
||
|
|
than a probe connected to a station on the same segment
|
||
|
|
would.
|
||
|
|
|
||
|
|
Probe location plays a much smaller role when considering
|
||
|
|
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
|
||
|
|
defines a collision as the simultaneous presence of signals
|
||
|
|
on the DO and RD circuits (transmitting and receiving
|
||
|
|
at the same time). A 10BASE-T station can only detect
|
||
|
|
collisions when it is transmitting. Thus probes placed on
|
||
|
|
a station and a repeater, should report the same number of
|
||
|
|
collisions.
|
||
|
|
|
||
|
|
Note also that an RMON probe inside a repeater should
|
||
|
|
ideally report collisions between the repeater and one or
|
||
|
|
more other hosts (transmit collisions as defined by IEEE
|
||
|
|
802.3k) plus receiver collisions observed on any coax
|
||
|
|
segments to which the repeater is connected."
|
||
|
|
::= { etherStatsEntry 13 }
|
||
|
|
|
||
|
|
etherStatsPkts64Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were 64 octets in length
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { etherStatsEntry 14 }
|
||
|
|
|
||
|
|
etherStatsPkts65to127Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
65 and 127 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { etherStatsEntry 15 }
|
||
|
|
|
||
|
|
etherStatsPkts128to255Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
128 and 255 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { etherStatsEntry 16 }
|
||
|
|
|
||
|
|
etherStatsPkts256to511Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
256 and 511 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { etherStatsEntry 17 }
|
||
|
|
|
||
|
|
etherStatsPkts512to1023Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
512 and 1023 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { etherStatsEntry 18 }
|
||
|
|
|
||
|
|
etherStatsPkts1024to1518Octets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets (including bad
|
||
|
|
packets) received that were between
|
||
|
|
1024 and 1518 octets in length inclusive
|
||
|
|
(excluding framing bits but including FCS octets)."
|
||
|
|
::= { etherStatsEntry 19 }
|
||
|
|
|
||
|
|
etherStatsOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { etherStatsEntry 20 }
|
||
|
|
|
||
|
|
etherStatsStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this etherStats entry."
|
||
|
|
::= { etherStatsEntry 21 }
|
||
|
|
|
||
|
|
-- The History Control Group
|
||
|
|
|
||
|
|
-- Implementation of the History Control group is optional.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The history control group controls the periodic statistical
|
||
|
|
-- sampling of data from various types of networks. The
|
||
|
|
-- historyControlTable stores configuration entries that each
|
||
|
|
-- define an interface, polling period, and other parameters.
|
||
|
|
-- Once samples are taken, their data is stored in an entry
|
||
|
|
-- in a media-specific table. Each such entry defines one
|
||
|
|
-- sample, and is associated with the historyControlEntry that
|
||
|
|
-- caused the sample to be taken. Each counter in the
|
||
|
|
-- etherHistoryEntry counts the same event as its similarly-named
|
||
|
|
-- counterpart in the etherStatsEntry, except that each value here
|
||
|
|
-- is a cumulative sum during a sampling period.
|
||
|
|
--
|
||
|
|
-- If the probe keeps track of the time of day, it should start
|
||
|
|
-- the first sample of the history at a time such that
|
||
|
|
-- when the next hour of the day begins, a sample is
|
||
|
|
-- started at that instant. This tends to make more
|
||
|
|
-- user-friendly reports, and enables comparison of reports
|
||
|
|
-- from different probes that have relatively accurate time
|
||
|
|
-- of day.
|
||
|
|
--
|
||
|
|
-- The probe is encouraged to add two history control entries
|
||
|
|
-- per monitored interface upon initialization that describe a short
|
||
|
|
-- term and a long term polling period. Suggested parameters are 30
|
||
|
|
-- seconds for the short term polling period and 30 minutes for
|
||
|
|
-- the long term period.
|
||
|
|
|
||
|
|
historyControlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HistoryControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of history control entries."
|
||
|
|
::= { history 1 }
|
||
|
|
|
||
|
|
historyControlEntry OBJECT-TYPE
|
||
|
|
SYNTAX HistoryControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of parameters that set up a periodic sampling of
|
||
|
|
statistics. As an example, an instance of the
|
||
|
|
historyControlInterval object might be named
|
||
|
|
historyControlInterval.2"
|
||
|
|
INDEX { historyControlIndex }
|
||
|
|
::= { historyControlTable 1 }
|
||
|
|
|
||
|
|
HistoryControlEntry ::= SEQUENCE {
|
||
|
|
historyControlIndex Integer32,
|
||
|
|
historyControlDataSource OBJECT IDENTIFIER,
|
||
|
|
historyControlBucketsRequested Integer32,
|
||
|
|
historyControlBucketsGranted Integer32,
|
||
|
|
historyControlInterval Integer32,
|
||
|
|
historyControlOwner OwnerString,
|
||
|
|
historyControlStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
historyControlIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in the
|
||
|
|
historyControl table. Each such entry defines a
|
||
|
|
set of samples at a particular interval for an
|
||
|
|
interface on the device."
|
||
|
|
::= { historyControlEntry 1 }
|
||
|
|
|
||
|
|
historyControlDataSource OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the source of the data for
|
||
|
|
which historical data was collected and
|
||
|
|
placed in a media-specific table on behalf of this
|
||
|
|
historyControlEntry. This source can be any
|
||
|
|
interface on this device. In order to identify
|
||
|
|
|
||
|
|
a particular interface, this object shall identify
|
||
|
|
the instance of the ifIndex object, defined
|
||
|
|
in RFC 2233 [17], for the desired interface.
|
||
|
|
For example, if an entry were to receive data from
|
||
|
|
interface #1, this object would be set to ifIndex.1.
|
||
|
|
|
||
|
|
The statistics in this group reflect all packets
|
||
|
|
on the local network segment attached to the identified
|
||
|
|
interface.
|
||
|
|
|
||
|
|
An agent may or may not be able to tell if fundamental
|
||
|
|
changes to the media of the interface have occurred and
|
||
|
|
necessitate an invalidation of this entry. For example, a
|
||
|
|
hot-pluggable ethernet card could be pulled out and replaced
|
||
|
|
by a token-ring card. In such a case, if the agent has such
|
||
|
|
knowledge of the change, it is recommended that it
|
||
|
|
invalidate this entry.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
historyControlStatus object is equal to valid(1)."
|
||
|
|
::= { historyControlEntry 2 }
|
||
|
|
|
||
|
|
historyControlBucketsRequested OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The requested number of discrete time intervals
|
||
|
|
over which data is to be saved in the part of the
|
||
|
|
media-specific table associated with this
|
||
|
|
historyControlEntry.
|
||
|
|
|
||
|
|
When this object is created or modified, the probe
|
||
|
|
should set historyControlBucketsGranted as closely to
|
||
|
|
this object as is possible for the particular probe
|
||
|
|
implementation and available resources."
|
||
|
|
DEFVAL { 50 }
|
||
|
|
::= { historyControlEntry 3 }
|
||
|
|
|
||
|
|
historyControlBucketsGranted OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of discrete sampling intervals
|
||
|
|
over which data shall be saved in the part of
|
||
|
|
the media-specific table associated with this
|
||
|
|
historyControlEntry.
|
||
|
|
|
||
|
|
When the associated historyControlBucketsRequested
|
||
|
|
object is created or modified, the probe
|
||
|
|
should set this object as closely to the requested
|
||
|
|
value as is possible for the particular
|
||
|
|
probe implementation and available resources. The
|
||
|
|
probe must not lower this value except as a result
|
||
|
|
of a modification to the associated
|
||
|
|
historyControlBucketsRequested object.
|
||
|
|
|
||
|
|
There will be times when the actual number of
|
||
|
|
buckets associated with this entry is less than
|
||
|
|
the value of this object. In this case, at the
|
||
|
|
end of each sampling interval, a new bucket will
|
||
|
|
be added to the media-specific table.
|
||
|
|
|
||
|
|
When the number of buckets reaches the value of
|
||
|
|
this object and a new bucket is to be added to the
|
||
|
|
media-specific table, the oldest bucket associated
|
||
|
|
with this historyControlEntry shall be deleted by
|
||
|
|
the agent so that the new bucket can be added.
|
||
|
|
|
||
|
|
When the value of this object changes to a value less
|
||
|
|
than the current value, entries are deleted
|
||
|
|
from the media-specific table associated with this
|
||
|
|
historyControlEntry. Enough of the oldest of these
|
||
|
|
entries shall be deleted by the agent so that their
|
||
|
|
number remains less than or equal to the new value of
|
||
|
|
this object.
|
||
|
|
|
||
|
|
When the value of this object changes to a value greater
|
||
|
|
than the current value, the number of associated media-
|
||
|
|
specific entries may be allowed to grow."
|
||
|
|
::= { historyControlEntry 4 }
|
||
|
|
|
||
|
|
historyControlInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..3600)
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The interval in seconds over which the data is
|
||
|
|
sampled for each bucket in the part of the
|
||
|
|
media-specific table associated with this
|
||
|
|
historyControlEntry. This interval can
|
||
|
|
be set to any number of seconds between 1 and
|
||
|
|
3600 (1 hour).
|
||
|
|
|
||
|
|
Because the counters in a bucket may overflow at their
|
||
|
|
|
||
|
|
maximum value with no indication, a prudent manager will
|
||
|
|
take into account the possibility of overflow in any of
|
||
|
|
the associated counters. It is important to consider the
|
||
|
|
minimum time in which any counter could overflow on a
|
||
|
|
particular media type and set the historyControlInterval
|
||
|
|
object to a value less than this interval. This is
|
||
|
|
typically most important for the 'octets' counter in any
|
||
|
|
media-specific table. For example, on an Ethernet
|
||
|
|
network, the etherHistoryOctets counter could overflow
|
||
|
|
in about one hour at the Ethernet's maximum
|
||
|
|
utilization.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
historyControlStatus object is equal to valid(1)."
|
||
|
|
DEFVAL { 1800 }
|
||
|
|
::= { historyControlEntry 5 }
|
||
|
|
|
||
|
|
historyControlOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { historyControlEntry 6 }
|
||
|
|
|
||
|
|
historyControlStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this historyControl entry.
|
||
|
|
|
||
|
|
Each instance of the media-specific table associated
|
||
|
|
with this historyControlEntry will be deleted by the agent
|
||
|
|
if this historyControlEntry is not equal to valid(1)."
|
||
|
|
::= { historyControlEntry 7 }
|
||
|
|
|
||
|
|
-- The Ethernet History Group
|
||
|
|
|
||
|
|
-- Implementation of the Ethernet History group is optional.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Ethernet History group records periodic statistical samples
|
||
|
|
-- from a network and stores them for later retrieval.
|
||
|
|
-- Once samples are taken, their data is stored in an entry
|
||
|
|
-- in a media-specific table. Each such entry defines one
|
||
|
|
|
||
|
|
-- sample, and is associated with the historyControlEntry that
|
||
|
|
-- caused the sample to be taken. This group defines the
|
||
|
|
-- etherHistoryTable, for Ethernet networks.
|
||
|
|
--
|
||
|
|
|
||
|
|
etherHistoryTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EtherHistoryEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of Ethernet history entries."
|
||
|
|
::= { history 2 }
|
||
|
|
|
||
|
|
etherHistoryEntry OBJECT-TYPE
|
||
|
|
SYNTAX EtherHistoryEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An historical sample of Ethernet statistics on a particular
|
||
|
|
Ethernet interface. This sample is associated with the
|
||
|
|
historyControlEntry which set up the parameters for
|
||
|
|
a regular collection of these samples. As an example, an
|
||
|
|
instance of the etherHistoryPkts object might be named
|
||
|
|
etherHistoryPkts.2.89"
|
||
|
|
INDEX { etherHistoryIndex , etherHistorySampleIndex }
|
||
|
|
::= { etherHistoryTable 1 }
|
||
|
|
|
||
|
|
EtherHistoryEntry ::= SEQUENCE {
|
||
|
|
etherHistoryIndex Integer32,
|
||
|
|
etherHistorySampleIndex Integer32,
|
||
|
|
etherHistoryIntervalStart TimeTicks,
|
||
|
|
etherHistoryDropEvents Counter32,
|
||
|
|
etherHistoryOctets Counter32,
|
||
|
|
etherHistoryPkts Counter32,
|
||
|
|
etherHistoryBroadcastPkts Counter32,
|
||
|
|
etherHistoryMulticastPkts Counter32,
|
||
|
|
etherHistoryCRCAlignErrors Counter32,
|
||
|
|
etherHistoryUndersizePkts Counter32,
|
||
|
|
etherHistoryOversizePkts Counter32,
|
||
|
|
etherHistoryFragments Counter32,
|
||
|
|
etherHistoryJabbers Counter32,
|
||
|
|
etherHistoryCollisions Counter32,
|
||
|
|
etherHistoryUtilization Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
etherHistoryIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The history of which this entry is a part. The
|
||
|
|
history identified by a particular value of this
|
||
|
|
index is the same history as identified
|
||
|
|
by the same value of historyControlIndex."
|
||
|
|
::= { etherHistoryEntry 1 }
|
||
|
|
|
||
|
|
etherHistorySampleIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies the particular
|
||
|
|
sample this entry represents among all samples
|
||
|
|
associated with the same historyControlEntry.
|
||
|
|
This index starts at 1 and increases by one
|
||
|
|
as each new sample is taken."
|
||
|
|
::= { etherHistoryEntry 2 }
|
||
|
|
|
||
|
|
etherHistoryIntervalStart OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime at the start of the interval
|
||
|
|
over which this sample was measured. If the probe
|
||
|
|
keeps track of the time of day, it should start
|
||
|
|
the first sample of the history at a time such that
|
||
|
|
when the next hour of the day begins, a sample is
|
||
|
|
started at that instant. Note that following this
|
||
|
|
rule may require the probe to delay collecting the
|
||
|
|
first sample of the history, as each sample must be
|
||
|
|
of the same interval. Also note that the sample which
|
||
|
|
is currently being collected is not accessible in this
|
||
|
|
table until the end of its interval."
|
||
|
|
::= { etherHistoryEntry 3 }
|
||
|
|
|
||
|
|
etherHistoryDropEvents OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of events in which packets
|
||
|
|
were dropped by the probe due to lack of resources
|
||
|
|
during this sampling interval. Note that this number
|
||
|
|
is not necessarily the number of packets dropped, it
|
||
|
|
is just the number of times this condition has been
|
||
|
|
|
||
|
|
detected."
|
||
|
|
::= { etherHistoryEntry 4 }
|
||
|
|
|
||
|
|
etherHistoryOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets of data (including
|
||
|
|
those in bad packets) received on the
|
||
|
|
network (excluding framing bits but including
|
||
|
|
FCS octets)."
|
||
|
|
::= { etherHistoryEntry 5 }
|
||
|
|
|
||
|
|
etherHistoryPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets (including bad packets)
|
||
|
|
received during this sampling interval."
|
||
|
|
::= { etherHistoryEntry 6 }
|
||
|
|
|
||
|
|
etherHistoryBroadcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets received during this
|
||
|
|
sampling interval that were directed to the
|
||
|
|
broadcast address."
|
||
|
|
::= { etherHistoryEntry 7 }
|
||
|
|
|
||
|
|
etherHistoryMulticastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets received during this
|
||
|
|
sampling interval that were directed to a
|
||
|
|
multicast address. Note that this number does not
|
||
|
|
include packets addressed to the broadcast address."
|
||
|
|
::= { etherHistoryEntry 8 }
|
||
|
|
|
||
|
|
etherHistoryCRCAlignErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received during this
|
||
|
|
sampling interval that had a length (excluding
|
||
|
|
framing bits but including FCS octets) between
|
||
|
|
64 and 1518 octets, inclusive, but had either a bad Frame
|
||
|
|
Check Sequence (FCS) with an integral number of octets
|
||
|
|
(FCS Error) or a bad FCS with a non-integral number
|
||
|
|
of octets (Alignment Error)."
|
||
|
|
::= { etherHistoryEntry 9 }
|
||
|
|
|
||
|
|
etherHistoryUndersizePkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received during this
|
||
|
|
sampling interval that were less than 64 octets
|
||
|
|
long (excluding framing bits but including FCS
|
||
|
|
octets) and were otherwise well formed."
|
||
|
|
::= { etherHistoryEntry 10 }
|
||
|
|
|
||
|
|
etherHistoryOversizePkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received during this
|
||
|
|
sampling interval that were longer than 1518
|
||
|
|
octets (excluding framing bits but including
|
||
|
|
FCS octets) but were otherwise well formed."
|
||
|
|
::= { etherHistoryEntry 11 }
|
||
|
|
|
||
|
|
etherHistoryFragments OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received during this
|
||
|
|
sampling interval that were less than 64 octets in
|
||
|
|
length (excluding framing bits but including FCS
|
||
|
|
|
||
|
|
octets) had either a bad Frame Check Sequence (FCS)
|
||
|
|
with an integral number of octets (FCS Error) or a bad
|
||
|
|
FCS with a non-integral number of octets (Alignment
|
||
|
|
Error).
|
||
|
|
|
||
|
|
Note that it is entirely normal for etherHistoryFragments to
|
||
|
|
increment. This is because it counts both runts (which are
|
||
|
|
normal occurrences due to collisions) and noise hits."
|
||
|
|
::= { etherHistoryEntry 12 }
|
||
|
|
|
||
|
|
etherHistoryJabbers OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received during this
|
||
|
|
sampling interval that were longer than 1518 octets
|
||
|
|
(excluding framing bits but including FCS octets),
|
||
|
|
and had either a bad Frame Check Sequence (FCS)
|
||
|
|
with an integral number of octets (FCS Error) or
|
||
|
|
a bad FCS with a non-integral number of octets
|
||
|
|
(Alignment Error).
|
||
|
|
|
||
|
|
Note that this definition of jabber is different
|
||
|
|
than the definition in IEEE-802.3 section 8.2.1.5
|
||
|
|
(10BASE5) and section 10.3.1.4 (10BASE2). These
|
||
|
|
documents define jabber as the condition where any
|
||
|
|
packet exceeds 20 ms. The allowed range to detect
|
||
|
|
jabber is between 20 ms and 150 ms."
|
||
|
|
::= { etherHistoryEntry 13 }
|
||
|
|
|
||
|
|
etherHistoryCollisions OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Collisions"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The best estimate of the total number of collisions
|
||
|
|
on this Ethernet segment during this sampling
|
||
|
|
interval.
|
||
|
|
|
||
|
|
The value returned will depend on the location of the
|
||
|
|
RMON probe. Section 8.2.1.3 (10BASE-5) and section
|
||
|
|
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
|
||
|
|
station must detect a collision, in the receive mode, if
|
||
|
|
three or more stations are transmitting simultaneously. A
|
||
|
|
repeater port must detect a collision when two or more
|
||
|
|
|
||
|
|
stations are transmitting simultaneously. Thus a probe
|
||
|
|
placed on a repeater port could record more collisions
|
||
|
|
than a probe connected to a station on the same segment
|
||
|
|
would.
|
||
|
|
|
||
|
|
Probe location plays a much smaller role when considering
|
||
|
|
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
|
||
|
|
defines a collision as the simultaneous presence of signals
|
||
|
|
on the DO and RD circuits (transmitting and receiving
|
||
|
|
at the same time). A 10BASE-T station can only detect
|
||
|
|
collisions when it is transmitting. Thus probes placed on
|
||
|
|
a station and a repeater, should report the same number of
|
||
|
|
collisions.
|
||
|
|
|
||
|
|
Note also that an RMON probe inside a repeater should
|
||
|
|
ideally report collisions between the repeater and one or
|
||
|
|
more other hosts (transmit collisions as defined by IEEE
|
||
|
|
802.3k) plus receiver collisions observed on any coax
|
||
|
|
segments to which the repeater is connected."
|
||
|
|
::= { etherHistoryEntry 14 }
|
||
|
|
|
||
|
|
etherHistoryUtilization OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..10000)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The best estimate of the mean physical layer
|
||
|
|
network utilization on this interface during this
|
||
|
|
sampling interval, in hundredths of a percent."
|
||
|
|
::= { etherHistoryEntry 15 }
|
||
|
|
|
||
|
|
-- The Alarm Group
|
||
|
|
|
||
|
|
-- Implementation of the Alarm group is optional. The Alarm Group
|
||
|
|
-- requires the implementation of the Event group.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Alarm group periodically takes statistical samples from
|
||
|
|
-- variables in the probe and compares them to thresholds that have
|
||
|
|
-- been configured. The alarm table stores configuration
|
||
|
|
-- entries that each define a variable, polling period, and
|
||
|
|
-- threshold parameters. If a sample is found to cross the
|
||
|
|
-- threshold values, an event is generated. Only variables that
|
||
|
|
-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
|
||
|
|
-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
|
||
|
|
-- this way.
|
||
|
|
--
|
||
|
|
|
||
|
|
-- This function has a hysteresis mechanism to limit the generation
|
||
|
|
-- of events. This mechanism generates one event as a threshold
|
||
|
|
-- is crossed in the appropriate direction. No more events are
|
||
|
|
-- generated for that threshold until the opposite threshold is
|
||
|
|
-- crossed.
|
||
|
|
--
|
||
|
|
-- In the case of a sampling a deltaValue, a probe may implement
|
||
|
|
-- this mechanism with more precision if it takes a delta sample
|
||
|
|
-- twice per period, each time comparing the sum of the latest two
|
||
|
|
-- samples to the threshold. This allows the detection of threshold
|
||
|
|
-- crossings that span the sampling boundary. Note that this does
|
||
|
|
-- not require any special configuration of the threshold value.
|
||
|
|
-- It is suggested that probes implement this more precise algorithm.
|
||
|
|
|
||
|
|
alarmTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF AlarmEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of alarm entries."
|
||
|
|
::= { alarm 1 }
|
||
|
|
|
||
|
|
alarmEntry OBJECT-TYPE
|
||
|
|
SYNTAX AlarmEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of parameters that set up a periodic checking
|
||
|
|
for alarm conditions. For example, an instance of the
|
||
|
|
alarmValue object might be named alarmValue.8"
|
||
|
|
INDEX { alarmIndex }
|
||
|
|
::= { alarmTable 1 }
|
||
|
|
|
||
|
|
AlarmEntry ::= SEQUENCE {
|
||
|
|
alarmIndex Integer32,
|
||
|
|
alarmInterval Integer32,
|
||
|
|
alarmVariable OBJECT IDENTIFIER,
|
||
|
|
alarmSampleType INTEGER,
|
||
|
|
alarmValue Integer32,
|
||
|
|
alarmStartupAlarm INTEGER,
|
||
|
|
alarmRisingThreshold Integer32,
|
||
|
|
alarmFallingThreshold Integer32,
|
||
|
|
alarmRisingEventIndex Integer32,
|
||
|
|
alarmFallingEventIndex Integer32,
|
||
|
|
alarmOwner OwnerString,
|
||
|
|
alarmStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
alarmIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in the
|
||
|
|
alarm table. Each such entry defines a
|
||
|
|
diagnostic sample at a particular interval
|
||
|
|
for an object on the device."
|
||
|
|
::= { alarmEntry 1 }
|
||
|
|
|
||
|
|
alarmInterval OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The interval in seconds over which the data is
|
||
|
|
sampled and compared with the rising and falling
|
||
|
|
thresholds. When setting this variable, care
|
||
|
|
should be taken in the case of deltaValue
|
||
|
|
sampling - the interval should be set short enough
|
||
|
|
that the sampled variable is very unlikely to
|
||
|
|
increase or decrease by more than 2^31 - 1 during
|
||
|
|
a single sampling interval.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 2 }
|
||
|
|
|
||
|
|
alarmVariable OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The object identifier of the particular variable to be
|
||
|
|
sampled. Only variables that resolve to an ASN.1 primitive
|
||
|
|
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
|
||
|
|
Gauge, or TimeTicks) may be sampled.
|
||
|
|
|
||
|
|
Because SNMP access control is articulated entirely
|
||
|
|
in terms of the contents of MIB views, no access
|
||
|
|
control mechanism exists that can restrict the value of
|
||
|
|
this object to identify only those objects that exist
|
||
|
|
in a particular MIB view. Because there is thus no
|
||
|
|
acceptable means of restricting the read access that
|
||
|
|
could be obtained through the alarm mechanism, the
|
||
|
|
probe must only grant write access to this object in
|
||
|
|
|
||
|
|
those views that have read access to all objects on
|
||
|
|
the probe.
|
||
|
|
|
||
|
|
During a set operation, if the supplied variable name is
|
||
|
|
not available in the selected MIB view, a badValue error
|
||
|
|
must be returned. If at any time the variable name of
|
||
|
|
an established alarmEntry is no longer available in the
|
||
|
|
selected MIB view, the probe must change the status of
|
||
|
|
this alarmEntry to invalid(4).
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 3 }
|
||
|
|
|
||
|
|
alarmSampleType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
absoluteValue(1),
|
||
|
|
deltaValue(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The method of sampling the selected variable and
|
||
|
|
calculating the value to be compared against the
|
||
|
|
thresholds. If the value of this object is
|
||
|
|
absoluteValue(1), the value of the selected variable
|
||
|
|
will be compared directly with the thresholds at the
|
||
|
|
end of the sampling interval. If the value of this
|
||
|
|
object is deltaValue(2), the value of the selected
|
||
|
|
variable at the last sample will be subtracted from
|
||
|
|
the current value, and the difference compared with
|
||
|
|
the thresholds.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 4 }
|
||
|
|
|
||
|
|
alarmValue OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the statistic during the last sampling
|
||
|
|
period. For example, if the sample type is deltaValue,
|
||
|
|
this value will be the difference between the samples
|
||
|
|
at the beginning and end of the period. If the sample
|
||
|
|
type is absoluteValue, this value will be the sampled
|
||
|
|
value at the end of the period.
|
||
|
|
|
||
|
|
This is the value that is compared with the rising and
|
||
|
|
falling thresholds.
|
||
|
|
|
||
|
|
The value during the current sampling period is not
|
||
|
|
made available until the period is completed and will
|
||
|
|
remain available until the next period completes."
|
||
|
|
::= { alarmEntry 5 }
|
||
|
|
|
||
|
|
alarmStartupAlarm OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
risingAlarm(1),
|
||
|
|
fallingAlarm(2),
|
||
|
|
risingOrFallingAlarm(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The alarm that may be sent when this entry is first
|
||
|
|
set to valid. If the first sample after this entry
|
||
|
|
becomes valid is greater than or equal to the
|
||
|
|
risingThreshold and alarmStartupAlarm is equal to
|
||
|
|
risingAlarm(1) or risingOrFallingAlarm(3), then a single
|
||
|
|
rising alarm will be generated. If the first sample
|
||
|
|
after this entry becomes valid is less than or equal
|
||
|
|
to the fallingThreshold and alarmStartupAlarm is equal
|
||
|
|
to fallingAlarm(2) or risingOrFallingAlarm(3), then a
|
||
|
|
single falling alarm will be generated.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 6 }
|
||
|
|
|
||
|
|
alarmRisingThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A threshold for the sampled statistic. When the current
|
||
|
|
sampled value is greater than or equal to this threshold,
|
||
|
|
and the value at the last sampling interval was less than
|
||
|
|
this threshold, a single event will be generated.
|
||
|
|
A single event will also be generated if the first
|
||
|
|
sample after this entry becomes valid is greater than or
|
||
|
|
equal to this threshold and the associated
|
||
|
|
alarmStartupAlarm is equal to risingAlarm(1) or
|
||
|
|
risingOrFallingAlarm(3).
|
||
|
|
|
||
|
|
After a rising event is generated, another such event
|
||
|
|
|
||
|
|
will not be generated until the sampled value
|
||
|
|
falls below this threshold and reaches the
|
||
|
|
alarmFallingThreshold.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 7 }
|
||
|
|
|
||
|
|
alarmFallingThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A threshold for the sampled statistic. When the current
|
||
|
|
sampled value is less than or equal to this threshold,
|
||
|
|
and the value at the last sampling interval was greater than
|
||
|
|
this threshold, a single event will be generated.
|
||
|
|
A single event will also be generated if the first
|
||
|
|
sample after this entry becomes valid is less than or
|
||
|
|
equal to this threshold and the associated
|
||
|
|
alarmStartupAlarm is equal to fallingAlarm(2) or
|
||
|
|
risingOrFallingAlarm(3).
|
||
|
|
|
||
|
|
After a falling event is generated, another such event
|
||
|
|
will not be generated until the sampled value
|
||
|
|
rises above this threshold and reaches the
|
||
|
|
alarmRisingThreshold.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 8 }
|
||
|
|
|
||
|
|
alarmRisingEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the eventEntry that is
|
||
|
|
used when a rising threshold is crossed. The
|
||
|
|
eventEntry identified by a particular value of
|
||
|
|
this index is the same as identified by the same value
|
||
|
|
of the eventIndex object. If there is no
|
||
|
|
corresponding entry in the eventTable, then
|
||
|
|
no association exists. In particular, if this value
|
||
|
|
is zero, no associated event will be generated, as
|
||
|
|
zero is not a valid event index.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 9 }
|
||
|
|
|
||
|
|
alarmFallingEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the eventEntry that is
|
||
|
|
used when a falling threshold is crossed. The
|
||
|
|
eventEntry identified by a particular value of
|
||
|
|
this index is the same as identified by the same value
|
||
|
|
of the eventIndex object. If there is no
|
||
|
|
corresponding entry in the eventTable, then
|
||
|
|
no association exists. In particular, if this value
|
||
|
|
is zero, no associated event will be generated, as
|
||
|
|
zero is not a valid event index.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
alarmStatus object is equal to valid(1)."
|
||
|
|
::= { alarmEntry 10 }
|
||
|
|
|
||
|
|
alarmOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { alarmEntry 11 }
|
||
|
|
|
||
|
|
alarmStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this alarm entry."
|
||
|
|
::= { alarmEntry 12 }
|
||
|
|
|
||
|
|
-- The Host Group
|
||
|
|
|
||
|
|
-- Implementation of the Host group is optional.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The host group discovers new hosts on the network by
|
||
|
|
-- keeping a list of source and destination MAC Addresses seen
|
||
|
|
-- in good packets. For each of these addresses, the host group
|
||
|
|
|
||
|
|
-- keeps a set of statistics. The hostControlTable controls
|
||
|
|
-- which interfaces this function is performed on, and contains
|
||
|
|
-- some information about the process. On behalf of each
|
||
|
|
-- hostControlEntry, data is collected on an interface and placed
|
||
|
|
-- in both the hostTable and the hostTimeTable. If the
|
||
|
|
-- monitoring device finds itself short of resources, it may
|
||
|
|
-- delete entries as needed. It is suggested that the device
|
||
|
|
-- delete the least recently used entries first.
|
||
|
|
|
||
|
|
-- The hostTable contains entries for each address discovered on
|
||
|
|
-- a particular interface. Each entry contains statistical
|
||
|
|
-- data about that host. This table is indexed by the
|
||
|
|
-- MAC address of the host, through which a random access
|
||
|
|
-- may be achieved.
|
||
|
|
|
||
|
|
-- The hostTimeTable contains data in the same format as the
|
||
|
|
-- hostTable, and must contain the same set of hosts, but is
|
||
|
|
-- indexed using hostTimeCreationOrder rather than hostAddress.
|
||
|
|
-- The hostTimeCreationOrder is an integer which reflects
|
||
|
|
-- the relative order in which a particular entry was discovered
|
||
|
|
-- and thus inserted into the table. As this order, and thus
|
||
|
|
-- the index, is among those entries currently in the table,
|
||
|
|
-- the index for a particular entry may change if an
|
||
|
|
-- (earlier) entry is deleted. Thus the association between
|
||
|
|
-- hostTimeCreationOrder and hostTimeEntry may be broken at
|
||
|
|
-- any time.
|
||
|
|
|
||
|
|
-- The hostTimeTable has two important uses. The first is the
|
||
|
|
-- fast download of this potentially large table. Because the
|
||
|
|
-- index of this table runs from 1 to the size of the table,
|
||
|
|
-- inclusive, its values are predictable. This allows very
|
||
|
|
-- efficient packing of variables into SNMP PDU's and allows
|
||
|
|
-- a table transfer to have multiple packets outstanding.
|
||
|
|
-- These benefits increase transfer rates tremendously.
|
||
|
|
|
||
|
|
-- The second use of the hostTimeTable is the efficient discovery
|
||
|
|
-- by the management station of new entries added to the table.
|
||
|
|
-- After the management station has downloaded the entire table,
|
||
|
|
-- it knows that new entries will be added immediately after the
|
||
|
|
-- end of the current table. It can thus detect new entries there
|
||
|
|
-- and retrieve them easily.
|
||
|
|
|
||
|
|
-- Because the association between hostTimeCreationOrder and
|
||
|
|
-- hostTimeEntry may be broken at any time, the management
|
||
|
|
-- station must monitor the related hostControlLastDeleteTime
|
||
|
|
-- object. When the management station thus detects a deletion,
|
||
|
|
-- it must assume that any such associations have been broken,
|
||
|
|
-- and invalidate any it has stored locally. This includes
|
||
|
|
|
||
|
|
-- restarting any download of the hostTimeTable that may have been
|
||
|
|
-- in progress, as well as rediscovering the end of the
|
||
|
|
-- hostTimeTable so that it may detect new entries. If the
|
||
|
|
-- management station does not detect the broken association,
|
||
|
|
-- it may continue to refer to a particular host by its
|
||
|
|
-- creationOrder while unwittingly retrieving the data associated
|
||
|
|
-- with another host entirely. If this happens while downloading
|
||
|
|
-- the host table, the management station may fail to download
|
||
|
|
-- all of the entries in the table.
|
||
|
|
|
||
|
|
hostControlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HostControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of host table control entries."
|
||
|
|
::= { hosts 1 }
|
||
|
|
|
||
|
|
hostControlEntry OBJECT-TYPE
|
||
|
|
SYNTAX HostControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of parameters that set up the discovery of hosts
|
||
|
|
on a particular interface and the collection of statistics
|
||
|
|
about these hosts. For example, an instance of the
|
||
|
|
hostControlTableSize object might be named
|
||
|
|
hostControlTableSize.1"
|
||
|
|
INDEX { hostControlIndex }
|
||
|
|
::= { hostControlTable 1 }
|
||
|
|
|
||
|
|
HostControlEntry ::= SEQUENCE {
|
||
|
|
|
||
|
|
hostControlIndex Integer32,
|
||
|
|
hostControlDataSource OBJECT IDENTIFIER,
|
||
|
|
hostControlTableSize Integer32,
|
||
|
|
hostControlLastDeleteTime TimeTicks,
|
||
|
|
hostControlOwner OwnerString,
|
||
|
|
hostControlStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
hostControlIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in the
|
||
|
|
|
||
|
|
hostControl table. Each such entry defines
|
||
|
|
a function that discovers hosts on a particular interface
|
||
|
|
and places statistics about them in the hostTable and
|
||
|
|
the hostTimeTable on behalf of this hostControlEntry."
|
||
|
|
::= { hostControlEntry 1 }
|
||
|
|
|
||
|
|
hostControlDataSource OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the source of the data for
|
||
|
|
this instance of the host function. This source
|
||
|
|
can be any interface on this device. In order
|
||
|
|
to identify a particular interface, this object shall
|
||
|
|
identify the instance of the ifIndex object, defined
|
||
|
|
in RFC 2233 [17], for the desired interface.
|
||
|
|
For example, if an entry were to receive data from
|
||
|
|
interface #1, this object would be set to ifIndex.1.
|
||
|
|
|
||
|
|
The statistics in this group reflect all packets
|
||
|
|
on the local network segment attached to the identified
|
||
|
|
interface.
|
||
|
|
|
||
|
|
An agent may or may not be able to tell if fundamental
|
||
|
|
changes to the media of the interface have occurred and
|
||
|
|
necessitate an invalidation of this entry. For example, a
|
||
|
|
hot-pluggable ethernet card could be pulled out and replaced
|
||
|
|
by a token-ring card. In such a case, if the agent has such
|
||
|
|
knowledge of the change, it is recommended that it
|
||
|
|
invalidate this entry.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
hostControlStatus object is equal to valid(1)."
|
||
|
|
::= { hostControlEntry 2 }
|
||
|
|
|
||
|
|
hostControlTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of hostEntries in the hostTable and the
|
||
|
|
hostTimeTable associated with this hostControlEntry."
|
||
|
|
::= { hostControlEntry 3 }
|
||
|
|
|
||
|
|
hostControlLastDeleteTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime when the last entry
|
||
|
|
was deleted from the portion of the hostTable
|
||
|
|
associated with this hostControlEntry. If no
|
||
|
|
deletions have occurred, this value shall be zero."
|
||
|
|
::= { hostControlEntry 4 }
|
||
|
|
|
||
|
|
hostControlOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { hostControlEntry 5 }
|
||
|
|
|
||
|
|
hostControlStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this hostControl entry.
|
||
|
|
|
||
|
|
If this object is not equal to valid(1), all associated
|
||
|
|
entries in the hostTable, hostTimeTable, and the
|
||
|
|
hostTopNTable shall be deleted by the agent."
|
||
|
|
::= { hostControlEntry 6 }
|
||
|
|
|
||
|
|
hostTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HostEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of host entries."
|
||
|
|
::= { hosts 2 }
|
||
|
|
|
||
|
|
hostEntry OBJECT-TYPE
|
||
|
|
SYNTAX HostEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of statistics for a particular host that has
|
||
|
|
been discovered on an interface of this device. For example,
|
||
|
|
an instance of the hostOutBroadcastPkts object might be
|
||
|
|
named hostOutBroadcastPkts.1.6.8.0.32.27.3.176"
|
||
|
|
INDEX { hostIndex, hostAddress }
|
||
|
|
::= { hostTable 1 }
|
||
|
|
|
||
|
|
HostEntry ::= SEQUENCE {
|
||
|
|
hostAddress OCTET STRING,
|
||
|
|
hostCreationOrder Integer32,
|
||
|
|
hostIndex Integer32,
|
||
|
|
hostInPkts Counter32,
|
||
|
|
hostOutPkts Counter32,
|
||
|
|
hostInOctets Counter32,
|
||
|
|
hostOutOctets Counter32,
|
||
|
|
hostOutErrors Counter32,
|
||
|
|
hostOutBroadcastPkts Counter32,
|
||
|
|
hostOutMulticastPkts Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
hostAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of this host."
|
||
|
|
::= { hostEntry 1 }
|
||
|
|
|
||
|
|
hostCreationOrder OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that defines the relative ordering of
|
||
|
|
the creation time of hosts captured for a
|
||
|
|
particular hostControlEntry. This index shall
|
||
|
|
be between 1 and N, where N is the value of
|
||
|
|
the associated hostControlTableSize. The ordering
|
||
|
|
of the indexes is based on the order of each entry's
|
||
|
|
insertion into the table, in which entries added earlier
|
||
|
|
have a lower index value than entries added later.
|
||
|
|
|
||
|
|
It is important to note that the order for a
|
||
|
|
particular entry may change as an (earlier) entry
|
||
|
|
is deleted from the table. Because this order may
|
||
|
|
change, management stations should make use of the
|
||
|
|
hostControlLastDeleteTime variable in the
|
||
|
|
hostControlEntry associated with the relevant
|
||
|
|
portion of the hostTable. By observing
|
||
|
|
this variable, the management station may detect
|
||
|
|
the circumstances where a previous association
|
||
|
|
between a value of hostCreationOrder
|
||
|
|
and a hostEntry may no longer hold."
|
||
|
|
::= { hostEntry 2 }
|
||
|
|
|
||
|
|
hostIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of collected host statistics of which
|
||
|
|
this entry is a part. The set of hosts
|
||
|
|
identified by a particular value of this
|
||
|
|
index is associated with the hostControlEntry
|
||
|
|
as identified by the same value of hostControlIndex."
|
||
|
|
::= { hostEntry 3 }
|
||
|
|
|
||
|
|
hostInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets transmitted to this
|
||
|
|
address since it was added to the hostTable."
|
||
|
|
::= { hostEntry 4 }
|
||
|
|
|
||
|
|
hostOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets, including bad packets, transmitted
|
||
|
|
by this address since it was added to the hostTable."
|
||
|
|
::= { hostEntry 5 }
|
||
|
|
|
||
|
|
hostInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets transmitted to this address since
|
||
|
|
it was added to the hostTable (excluding framing
|
||
|
|
bits but including FCS octets), except for those
|
||
|
|
octets in bad packets."
|
||
|
|
::= { hostEntry 6 }
|
||
|
|
|
||
|
|
hostOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets transmitted by this address since
|
||
|
|
it was added to the hostTable (excluding framing
|
||
|
|
bits but including FCS octets), including those
|
||
|
|
octets in bad packets."
|
||
|
|
::= { hostEntry 7 }
|
||
|
|
|
||
|
|
hostOutErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of bad packets transmitted by this address
|
||
|
|
since this host was added to the hostTable."
|
||
|
|
::= { hostEntry 8 }
|
||
|
|
|
||
|
|
hostOutBroadcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets transmitted by this
|
||
|
|
address that were directed to the broadcast address
|
||
|
|
since this host was added to the hostTable."
|
||
|
|
::= { hostEntry 9 }
|
||
|
|
|
||
|
|
hostOutMulticastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets transmitted by this
|
||
|
|
address that were directed to a multicast address
|
||
|
|
since this host was added to the hostTable.
|
||
|
|
Note that this number does not include packets
|
||
|
|
directed to the broadcast address."
|
||
|
|
::= { hostEntry 10 }
|
||
|
|
|
||
|
|
-- host Time Table
|
||
|
|
|
||
|
|
hostTimeTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HostTimeEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of time-ordered host table entries."
|
||
|
|
::= { hosts 3 }
|
||
|
|
|
||
|
|
hostTimeEntry OBJECT-TYPE
|
||
|
|
SYNTAX HostTimeEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of statistics for a particular host that has
|
||
|
|
been discovered on an interface of this device. This
|
||
|
|
collection includes the relative ordering of the creation
|
||
|
|
time of this object. For example, an instance of the
|
||
|
|
hostTimeOutBroadcastPkts object might be named
|
||
|
|
hostTimeOutBroadcastPkts.1.687"
|
||
|
|
INDEX { hostTimeIndex, hostTimeCreationOrder }
|
||
|
|
::= { hostTimeTable 1 }
|
||
|
|
|
||
|
|
HostTimeEntry ::= SEQUENCE {
|
||
|
|
hostTimeAddress OCTET STRING,
|
||
|
|
hostTimeCreationOrder Integer32,
|
||
|
|
hostTimeIndex Integer32,
|
||
|
|
hostTimeInPkts Counter32,
|
||
|
|
hostTimeOutPkts Counter32,
|
||
|
|
hostTimeInOctets Counter32,
|
||
|
|
hostTimeOutOctets Counter32,
|
||
|
|
hostTimeOutErrors Counter32,
|
||
|
|
hostTimeOutBroadcastPkts Counter32,
|
||
|
|
hostTimeOutMulticastPkts Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
hostTimeAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of this host."
|
||
|
|
::= { hostTimeEntry 1 }
|
||
|
|
|
||
|
|
hostTimeCreationOrder OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in
|
||
|
|
the hostTime table among those entries associated
|
||
|
|
with the same hostControlEntry. This index shall
|
||
|
|
be between 1 and N, where N is the value of
|
||
|
|
|
||
|
|
the associated hostControlTableSize. The ordering
|
||
|
|
of the indexes is based on the order of each entry's
|
||
|
|
insertion into the table, in which entries added earlier
|
||
|
|
have a lower index value than entries added later.
|
||
|
|
Thus the management station has the ability to
|
||
|
|
learn of new entries added to this table without
|
||
|
|
downloading the entire table.
|
||
|
|
|
||
|
|
It is important to note that the index for a
|
||
|
|
particular entry may change as an (earlier) entry
|
||
|
|
is deleted from the table. Because this order may
|
||
|
|
change, management stations should make use of the
|
||
|
|
hostControlLastDeleteTime variable in the
|
||
|
|
hostControlEntry associated with the relevant
|
||
|
|
portion of the hostTimeTable. By observing
|
||
|
|
this variable, the management station may detect
|
||
|
|
the circumstances where a download of the table
|
||
|
|
may have missed entries, and where a previous
|
||
|
|
association between a value of hostTimeCreationOrder
|
||
|
|
and a hostTimeEntry may no longer hold."
|
||
|
|
::= { hostTimeEntry 2 }
|
||
|
|
|
||
|
|
hostTimeIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of collected host statistics of which
|
||
|
|
this entry is a part. The set of hosts
|
||
|
|
identified by a particular value of this
|
||
|
|
index is associated with the hostControlEntry
|
||
|
|
as identified by the same value of hostControlIndex."
|
||
|
|
::= { hostTimeEntry 3 }
|
||
|
|
|
||
|
|
hostTimeInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets transmitted to this
|
||
|
|
address since it was added to the hostTimeTable."
|
||
|
|
::= { hostTimeEntry 4 }
|
||
|
|
|
||
|
|
hostTimeOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets, including bad packets, transmitted
|
||
|
|
by this address since it was added to the hostTimeTable."
|
||
|
|
::= { hostTimeEntry 5 }
|
||
|
|
|
||
|
|
hostTimeInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets transmitted to this address since
|
||
|
|
it was added to the hostTimeTable (excluding framing
|
||
|
|
bits but including FCS octets), except for those
|
||
|
|
octets in bad packets."
|
||
|
|
::= { hostTimeEntry 6 }
|
||
|
|
|
||
|
|
hostTimeOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets transmitted by this address since
|
||
|
|
it was added to the hostTimeTable (excluding framing
|
||
|
|
bits but including FCS octets), including those
|
||
|
|
octets in bad packets."
|
||
|
|
::= { hostTimeEntry 7 }
|
||
|
|
|
||
|
|
hostTimeOutErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of bad packets transmitted by this address
|
||
|
|
since this host was added to the hostTimeTable."
|
||
|
|
::= { hostTimeEntry 8 }
|
||
|
|
|
||
|
|
hostTimeOutBroadcastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets transmitted by this
|
||
|
|
address that were directed to the broadcast address
|
||
|
|
|
||
|
|
since this host was added to the hostTimeTable."
|
||
|
|
::= { hostTimeEntry 9 }
|
||
|
|
|
||
|
|
hostTimeOutMulticastPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of good packets transmitted by this
|
||
|
|
address that were directed to a multicast address
|
||
|
|
since this host was added to the hostTimeTable.
|
||
|
|
Note that this number does not include packets directed
|
||
|
|
to the broadcast address."
|
||
|
|
::= { hostTimeEntry 10 }
|
||
|
|
|
||
|
|
-- The Host Top "N" Group
|
||
|
|
|
||
|
|
-- Implementation of the Host Top N group is optional. The Host Top N
|
||
|
|
-- group requires the implementation of the host group.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Host Top N group is used to prepare reports that describe
|
||
|
|
-- the hosts that top a list ordered by one of their statistics.
|
||
|
|
-- The available statistics are samples of one of their
|
||
|
|
-- base statistics, over an interval specified by the management
|
||
|
|
-- station. Thus, these statistics are rate based. The management
|
||
|
|
-- station also selects how many such hosts are reported.
|
||
|
|
|
||
|
|
-- The hostTopNControlTable is used to initiate the generation of
|
||
|
|
-- such a report. The management station may select the parameters
|
||
|
|
-- of such a report, such as which interface, which statistic,
|
||
|
|
-- how many hosts, and the start and stop times of the sampling.
|
||
|
|
-- When the report is prepared, entries are created in the
|
||
|
|
-- hostTopNTable associated with the relevant hostTopNControlEntry.
|
||
|
|
-- These entries are static for each report after it has been
|
||
|
|
-- prepared.
|
||
|
|
|
||
|
|
hostTopNControlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HostTopNControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of top N host control entries."
|
||
|
|
::= { hostTopN 1 }
|
||
|
|
|
||
|
|
hostTopNControlEntry OBJECT-TYPE
|
||
|
|
SYNTAX HostTopNControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of parameters that control the creation of a report
|
||
|
|
of the top N hosts according to several metrics. For
|
||
|
|
example, an instance of the hostTopNDuration object might
|
||
|
|
be named hostTopNDuration.3"
|
||
|
|
INDEX { hostTopNControlIndex }
|
||
|
|
::= { hostTopNControlTable 1 }
|
||
|
|
|
||
|
|
HostTopNControlEntry ::= SEQUENCE {
|
||
|
|
hostTopNControlIndex Integer32,
|
||
|
|
hostTopNHostIndex Integer32,
|
||
|
|
hostTopNRateBase INTEGER,
|
||
|
|
hostTopNTimeRemaining Integer32,
|
||
|
|
hostTopNDuration Integer32,
|
||
|
|
hostTopNRequestedSize Integer32,
|
||
|
|
hostTopNGrantedSize Integer32,
|
||
|
|
hostTopNStartTime TimeTicks,
|
||
|
|
hostTopNOwner OwnerString,
|
||
|
|
hostTopNStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
hostTopNControlIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry
|
||
|
|
in the hostTopNControl table. Each such
|
||
|
|
entry defines one top N report prepared for
|
||
|
|
one interface."
|
||
|
|
::= { hostTopNControlEntry 1 }
|
||
|
|
|
||
|
|
hostTopNHostIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The host table for which a top N report will be prepared
|
||
|
|
on behalf of this entry. The host table identified by a
|
||
|
|
particular value of this index is associated with the same
|
||
|
|
host table as identified by the same value of
|
||
|
|
hostIndex.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
hostTopNStatus object is equal to valid(1)."
|
||
|
|
::= { hostTopNControlEntry 2 }
|
||
|
|
|
||
|
|
hostTopNRateBase OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
hostTopNInPkts(1),
|
||
|
|
hostTopNOutPkts(2),
|
||
|
|
hostTopNInOctets(3),
|
||
|
|
hostTopNOutOctets(4),
|
||
|
|
hostTopNOutErrors(5),
|
||
|
|
hostTopNOutBroadcastPkts(6),
|
||
|
|
hostTopNOutMulticastPkts(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The variable for each host that the hostTopNRate
|
||
|
|
variable is based upon.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
hostTopNStatus object is equal to valid(1)."
|
||
|
|
::= { hostTopNControlEntry 3 }
|
||
|
|
|
||
|
|
hostTopNTimeRemaining OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of seconds left in the report currently being
|
||
|
|
collected. When this object is modified by the management
|
||
|
|
station, a new collection is started, possibly aborting
|
||
|
|
a currently running report. The new value is used
|
||
|
|
as the requested duration of this report, which is
|
||
|
|
loaded into the associated hostTopNDuration object.
|
||
|
|
|
||
|
|
When this object is set to a non-zero value, any
|
||
|
|
associated hostTopNEntries shall be made
|
||
|
|
inaccessible by the monitor. While the value of this
|
||
|
|
object is non-zero, it decrements by one per second until
|
||
|
|
it reaches zero. During this time, all associated
|
||
|
|
hostTopNEntries shall remain inaccessible. At the time
|
||
|
|
that this object decrements to zero, the report is made
|
||
|
|
accessible in the hostTopNTable. Thus, the hostTopN
|
||
|
|
table needs to be created only at the end of the collection
|
||
|
|
interval."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hostTopNControlEntry 4 }
|
||
|
|
|
||
|
|
hostTopNDuration OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of seconds that this report has collected
|
||
|
|
during the last sampling interval, or if this
|
||
|
|
report is currently being collected, the number
|
||
|
|
of seconds that this report is being collected
|
||
|
|
during this sampling interval.
|
||
|
|
|
||
|
|
When the associated hostTopNTimeRemaining object is set,
|
||
|
|
this object shall be set by the probe to the same value
|
||
|
|
and shall not be modified until the next time
|
||
|
|
the hostTopNTimeRemaining is set.
|
||
|
|
|
||
|
|
This value shall be zero if no reports have been
|
||
|
|
requested for this hostTopNControlEntry."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { hostTopNControlEntry 5 }
|
||
|
|
|
||
|
|
hostTopNRequestedSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of hosts requested for the top N
|
||
|
|
table.
|
||
|
|
|
||
|
|
When this object is created or modified, the probe
|
||
|
|
should set hostTopNGrantedSize as closely to this
|
||
|
|
object as is possible for the particular probe
|
||
|
|
implementation and available resources."
|
||
|
|
DEFVAL { 10 }
|
||
|
|
::= { hostTopNControlEntry 6 }
|
||
|
|
|
||
|
|
hostTopNGrantedSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of hosts in the top N table.
|
||
|
|
|
||
|
|
When the associated hostTopNRequestedSize object is
|
||
|
|
created or modified, the probe should set this
|
||
|
|
object as closely to the requested value as is possible
|
||
|
|
for the particular implementation and available
|
||
|
|
|
||
|
|
resources. The probe must not lower this value except
|
||
|
|
as a result of a set to the associated
|
||
|
|
hostTopNRequestedSize object.
|
||
|
|
|
||
|
|
Hosts with the highest value of hostTopNRate shall be
|
||
|
|
placed in this table in decreasing order of this rate
|
||
|
|
until there is no more room or until there are no more
|
||
|
|
hosts."
|
||
|
|
::= { hostTopNControlEntry 7 }
|
||
|
|
|
||
|
|
hostTopNStartTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime when this top N report was
|
||
|
|
last started. In other words, this is the time that
|
||
|
|
the associated hostTopNTimeRemaining object was
|
||
|
|
modified to start the requested report."
|
||
|
|
::= { hostTopNControlEntry 8 }
|
||
|
|
|
||
|
|
hostTopNOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { hostTopNControlEntry 9 }
|
||
|
|
|
||
|
|
hostTopNStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this hostTopNControl entry.
|
||
|
|
|
||
|
|
If this object is not equal to valid(1), all associated
|
||
|
|
hostTopNEntries shall be deleted by the agent."
|
||
|
|
::= { hostTopNControlEntry 10 }
|
||
|
|
|
||
|
|
hostTopNTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF HostTopNEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of top N host entries."
|
||
|
|
::= { hostTopN 2 }
|
||
|
|
|
||
|
|
hostTopNEntry OBJECT-TYPE
|
||
|
|
SYNTAX HostTopNEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of statistics for a host that is part of a top N
|
||
|
|
report. For example, an instance of the hostTopNRate
|
||
|
|
object might be named hostTopNRate.3.10"
|
||
|
|
INDEX { hostTopNReport, hostTopNIndex }
|
||
|
|
::= { hostTopNTable 1 }
|
||
|
|
|
||
|
|
HostTopNEntry ::= SEQUENCE {
|
||
|
|
hostTopNReport Integer32,
|
||
|
|
hostTopNIndex Integer32,
|
||
|
|
hostTopNAddress OCTET STRING,
|
||
|
|
hostTopNRate Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
hostTopNReport OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the top N report of which
|
||
|
|
this entry is a part. The set of hosts
|
||
|
|
identified by a particular value of this
|
||
|
|
object is part of the same report as identified
|
||
|
|
by the same value of the hostTopNControlIndex object."
|
||
|
|
::= { hostTopNEntry 1 }
|
||
|
|
|
||
|
|
hostTopNIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in
|
||
|
|
the hostTopN table among those in the same report.
|
||
|
|
This index is between 1 and N, where N is the
|
||
|
|
number of entries in this table. Increasing values
|
||
|
|
of hostTopNIndex shall be assigned to entries with
|
||
|
|
decreasing values of hostTopNRate until index N
|
||
|
|
is assigned to the entry with the lowest value of
|
||
|
|
hostTopNRate or there are no more hostTopNEntries."
|
||
|
|
::= { hostTopNEntry 2 }
|
||
|
|
|
||
|
|
hostTopNAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The physical address of this host."
|
||
|
|
::= { hostTopNEntry 3 }
|
||
|
|
|
||
|
|
hostTopNRate OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of change in the selected variable
|
||
|
|
during this sampling interval. The selected
|
||
|
|
variable is this host's instance of the object
|
||
|
|
selected by hostTopNRateBase."
|
||
|
|
::= { hostTopNEntry 4 }
|
||
|
|
|
||
|
|
-- The Matrix Group
|
||
|
|
|
||
|
|
-- Implementation of the Matrix group is optional.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Matrix group consists of the matrixControlTable, matrixSDTable
|
||
|
|
-- and the matrixDSTable. These tables store statistics for a
|
||
|
|
-- particular conversation between two addresses. As the device
|
||
|
|
-- detects a new conversation, including those to a non-unicast
|
||
|
|
-- address, it creates a new entry in both of the matrix tables.
|
||
|
|
-- It must only create new entries based on information
|
||
|
|
-- received in good packets. If the monitoring device finds
|
||
|
|
-- itself short of resources, it may delete entries as needed.
|
||
|
|
-- It is suggested that the device delete the least recently used
|
||
|
|
-- entries first.
|
||
|
|
|
||
|
|
matrixControlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MatrixControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of information entries for the
|
||
|
|
traffic matrix on each interface."
|
||
|
|
::= { matrix 1 }
|
||
|
|
|
||
|
|
matrixControlEntry OBJECT-TYPE
|
||
|
|
SYNTAX MatrixControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Information about a traffic matrix on a particular
|
||
|
|
|
||
|
|
interface. For example, an instance of the
|
||
|
|
matrixControlLastDeleteTime object might be named
|
||
|
|
matrixControlLastDeleteTime.1"
|
||
|
|
INDEX { matrixControlIndex }
|
||
|
|
::= { matrixControlTable 1 }
|
||
|
|
|
||
|
|
MatrixControlEntry ::= SEQUENCE {
|
||
|
|
matrixControlIndex Integer32,
|
||
|
|
matrixControlDataSource OBJECT IDENTIFIER,
|
||
|
|
matrixControlTableSize Integer32,
|
||
|
|
matrixControlLastDeleteTime TimeTicks,
|
||
|
|
matrixControlOwner OwnerString,
|
||
|
|
matrixControlStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
matrixControlIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in the
|
||
|
|
matrixControl table. Each such entry defines
|
||
|
|
a function that discovers conversations on a particular
|
||
|
|
interface and places statistics about them in the
|
||
|
|
matrixSDTable and the matrixDSTable on behalf of this
|
||
|
|
matrixControlEntry."
|
||
|
|
::= { matrixControlEntry 1 }
|
||
|
|
|
||
|
|
matrixControlDataSource OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the source of
|
||
|
|
the data from which this entry creates a traffic matrix.
|
||
|
|
This source can be any interface on this device. In
|
||
|
|
order to identify a particular interface, this object
|
||
|
|
shall identify the instance of the ifIndex object,
|
||
|
|
defined in RFC 2233 [17], for the desired
|
||
|
|
interface. For example, if an entry were to receive data
|
||
|
|
from interface #1, this object would be set to ifIndex.1.
|
||
|
|
|
||
|
|
The statistics in this group reflect all packets
|
||
|
|
on the local network segment attached to the identified
|
||
|
|
interface.
|
||
|
|
|
||
|
|
An agent may or may not be able to tell if fundamental
|
||
|
|
changes to the media of the interface have occurred and
|
||
|
|
|
||
|
|
necessitate an invalidation of this entry. For example, a
|
||
|
|
hot-pluggable ethernet card could be pulled out and replaced
|
||
|
|
by a token-ring card. In such a case, if the agent has such
|
||
|
|
knowledge of the change, it is recommended that it
|
||
|
|
invalidate this entry.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
matrixControlStatus object is equal to valid(1)."
|
||
|
|
::= { matrixControlEntry 2 }
|
||
|
|
|
||
|
|
matrixControlTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of matrixSDEntries in the matrixSDTable
|
||
|
|
for this interface. This must also be the value of
|
||
|
|
the number of entries in the matrixDSTable for this
|
||
|
|
interface."
|
||
|
|
::= { matrixControlEntry 3 }
|
||
|
|
|
||
|
|
matrixControlLastDeleteTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime when the last entry
|
||
|
|
was deleted from the portion of the matrixSDTable
|
||
|
|
or matrixDSTable associated with this matrixControlEntry.
|
||
|
|
If no deletions have occurred, this value shall be
|
||
|
|
zero."
|
||
|
|
::= { matrixControlEntry 4 }
|
||
|
|
|
||
|
|
matrixControlOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { matrixControlEntry 5 }
|
||
|
|
|
||
|
|
matrixControlStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this matrixControl entry.
|
||
|
|
|
||
|
|
If this object is not equal to valid(1), all associated
|
||
|
|
entries in the matrixSDTable and the matrixDSTable
|
||
|
|
shall be deleted by the agent."
|
||
|
|
::= { matrixControlEntry 6 }
|
||
|
|
|
||
|
|
matrixSDTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MatrixSDEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of traffic matrix entries indexed by
|
||
|
|
source and destination MAC address."
|
||
|
|
::= { matrix 2 }
|
||
|
|
|
||
|
|
matrixSDEntry OBJECT-TYPE
|
||
|
|
SYNTAX MatrixSDEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of statistics for communications between
|
||
|
|
two addresses on a particular interface. For example,
|
||
|
|
an instance of the matrixSDPkts object might be named
|
||
|
|
matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113"
|
||
|
|
INDEX { matrixSDIndex,
|
||
|
|
matrixSDSourceAddress, matrixSDDestAddress }
|
||
|
|
::= { matrixSDTable 1 }
|
||
|
|
|
||
|
|
MatrixSDEntry ::= SEQUENCE {
|
||
|
|
matrixSDSourceAddress OCTET STRING,
|
||
|
|
matrixSDDestAddress OCTET STRING,
|
||
|
|
matrixSDIndex Integer32,
|
||
|
|
matrixSDPkts Counter32,
|
||
|
|
matrixSDOctets Counter32,
|
||
|
|
matrixSDErrors Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
matrixSDSourceAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The source physical address."
|
||
|
|
::= { matrixSDEntry 1 }
|
||
|
|
|
||
|
|
matrixSDDestAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The destination physical address."
|
||
|
|
::= { matrixSDEntry 2 }
|
||
|
|
|
||
|
|
matrixSDIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of collected matrix statistics of which
|
||
|
|
this entry is a part. The set of matrix statistics
|
||
|
|
identified by a particular value of this index
|
||
|
|
is associated with the same matrixControlEntry
|
||
|
|
as identified by the same value of matrixControlIndex."
|
||
|
|
::= { matrixSDEntry 3 }
|
||
|
|
|
||
|
|
matrixSDPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets transmitted from the source
|
||
|
|
address to the destination address (this number includes
|
||
|
|
bad packets)."
|
||
|
|
::= { matrixSDEntry 4 }
|
||
|
|
|
||
|
|
matrixSDOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets (excluding framing bits but
|
||
|
|
including FCS octets) contained in all packets
|
||
|
|
transmitted from the source address to the
|
||
|
|
destination address."
|
||
|
|
::= { matrixSDEntry 5 }
|
||
|
|
|
||
|
|
matrixSDErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of bad packets transmitted from
|
||
|
|
the source address to the destination address."
|
||
|
|
::= { matrixSDEntry 6 }
|
||
|
|
|
||
|
|
-- Traffic matrix tables from destination to source
|
||
|
|
|
||
|
|
matrixDSTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF MatrixDSEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of traffic matrix entries indexed by
|
||
|
|
destination and source MAC address."
|
||
|
|
::= { matrix 3 }
|
||
|
|
|
||
|
|
matrixDSEntry OBJECT-TYPE
|
||
|
|
SYNTAX MatrixDSEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of statistics for communications between
|
||
|
|
two addresses on a particular interface. For example,
|
||
|
|
an instance of the matrixSDPkts object might be named
|
||
|
|
matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176"
|
||
|
|
INDEX { matrixDSIndex,
|
||
|
|
matrixDSDestAddress, matrixDSSourceAddress }
|
||
|
|
::= { matrixDSTable 1 }
|
||
|
|
|
||
|
|
MatrixDSEntry ::= SEQUENCE {
|
||
|
|
matrixDSSourceAddress OCTET STRING,
|
||
|
|
matrixDSDestAddress OCTET STRING,
|
||
|
|
matrixDSIndex Integer32,
|
||
|
|
matrixDSPkts Counter32,
|
||
|
|
matrixDSOctets Counter32,
|
||
|
|
matrixDSErrors Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
matrixDSSourceAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The source physical address."
|
||
|
|
::= { matrixDSEntry 1 }
|
||
|
|
|
||
|
|
matrixDSDestAddress OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The destination physical address."
|
||
|
|
::= { matrixDSEntry 2 }
|
||
|
|
|
||
|
|
matrixDSIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The set of collected matrix statistics of which
|
||
|
|
this entry is a part. The set of matrix statistics
|
||
|
|
identified by a particular value of this index
|
||
|
|
is associated with the same matrixControlEntry
|
||
|
|
as identified by the same value of matrixControlIndex."
|
||
|
|
::= { matrixDSEntry 3 }
|
||
|
|
|
||
|
|
matrixDSPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets transmitted from the source
|
||
|
|
address to the destination address (this number includes
|
||
|
|
bad packets)."
|
||
|
|
::= { matrixDSEntry 4 }
|
||
|
|
|
||
|
|
matrixDSOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of octets (excluding framing bits
|
||
|
|
but including FCS octets) contained in all packets
|
||
|
|
transmitted from the source address to the
|
||
|
|
destination address."
|
||
|
|
::= { matrixDSEntry 5 }
|
||
|
|
|
||
|
|
matrixDSErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of bad packets transmitted from
|
||
|
|
the source address to the destination address."
|
||
|
|
::= { matrixDSEntry 6 }
|
||
|
|
|
||
|
|
-- The Filter Group
|
||
|
|
|
||
|
|
-- Implementation of the Filter group is optional.
|
||
|
|
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Filter group allows packets to be captured with an
|
||
|
|
-- arbitrary filter expression. A logical data and
|
||
|
|
-- event stream or "channel" is formed by the packets
|
||
|
|
-- that match the filter expression.
|
||
|
|
--
|
||
|
|
-- This filter mechanism allows the creation of an arbitrary
|
||
|
|
-- logical expression with which to filter packets. Each
|
||
|
|
-- filter associated with a channel is OR'ed with the others.
|
||
|
|
-- Within a filter, any bits checked in the data and status are
|
||
|
|
-- AND'ed with respect to other bits in the same filter. The
|
||
|
|
-- NotMask also allows for checking for inequality. Finally,
|
||
|
|
-- the channelAcceptType object allows for inversion of the
|
||
|
|
-- whole equation.
|
||
|
|
--
|
||
|
|
-- If a management station wishes to receive a trap to alert it
|
||
|
|
-- that new packets have been captured and are available for
|
||
|
|
-- download, it is recommended that it set up an alarm entry that
|
||
|
|
-- monitors the value of the relevant channelMatches instance.
|
||
|
|
--
|
||
|
|
-- The channel can be turned on or off, and can also
|
||
|
|
-- generate events when packets pass through it.
|
||
|
|
|
||
|
|
filterTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FilterEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of packet filter entries."
|
||
|
|
::= { filter 1 }
|
||
|
|
|
||
|
|
filterEntry OBJECT-TYPE
|
||
|
|
SYNTAX FilterEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of parameters for a packet filter applied on a
|
||
|
|
particular interface. As an example, an instance of the
|
||
|
|
filterPktData object might be named filterPktData.12"
|
||
|
|
INDEX { filterIndex }
|
||
|
|
::= { filterTable 1 }
|
||
|
|
|
||
|
|
FilterEntry ::= SEQUENCE {
|
||
|
|
filterIndex Integer32,
|
||
|
|
filterChannelIndex Integer32,
|
||
|
|
filterPktDataOffset Integer32,
|
||
|
|
filterPktData OCTET STRING,
|
||
|
|
filterPktDataMask OCTET STRING,
|
||
|
|
filterPktDataNotMask OCTET STRING,
|
||
|
|
filterPktStatus Integer32,
|
||
|
|
filterPktStatusMask Integer32,
|
||
|
|
filterPktStatusNotMask Integer32,
|
||
|
|
filterOwner OwnerString,
|
||
|
|
filterStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
filterIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry
|
||
|
|
in the filter table. Each such entry defines
|
||
|
|
one filter that is to be applied to every packet
|
||
|
|
received on an interface."
|
||
|
|
::= { filterEntry 1 }
|
||
|
|
|
||
|
|
filterChannelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the channel of which this filter
|
||
|
|
is a part. The filters identified by a particular value
|
||
|
|
of this object are associated with the same channel as
|
||
|
|
identified by the same value of the channelIndex object."
|
||
|
|
::= { filterEntry 2 }
|
||
|
|
|
||
|
|
filterPktDataOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The offset from the beginning of each packet where
|
||
|
|
a match of packet data will be attempted. This offset
|
||
|
|
is measured from the point in the physical layer
|
||
|
|
packet after the framing bits, if any. For example,
|
||
|
|
in an Ethernet frame, this point is at the beginning of
|
||
|
|
the destination MAC address.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { filterEntry 3 }
|
||
|
|
|
||
|
|
filterPktData OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The data that is to be matched with the input packet.
|
||
|
|
For each packet received, this filter and the accompanying
|
||
|
|
filterPktDataMask and filterPktDataNotMask will be
|
||
|
|
adjusted for the offset. The only bits relevant to this
|
||
|
|
match algorithm are those that have the corresponding
|
||
|
|
filterPktDataMask bit equal to one. The following three
|
||
|
|
rules are then applied to every packet:
|
||
|
|
|
||
|
|
(1) If the packet is too short and does not have data
|
||
|
|
corresponding to part of the filterPktData, the packet
|
||
|
|
will fail this data match.
|
||
|
|
|
||
|
|
(2) For each relevant bit from the packet with the
|
||
|
|
corresponding filterPktDataNotMask bit set to zero, if
|
||
|
|
the bit from the packet is not equal to the corresponding
|
||
|
|
bit from the filterPktData, then the packet will fail
|
||
|
|
this data match.
|
||
|
|
|
||
|
|
(3) If for every relevant bit from the packet with the
|
||
|
|
corresponding filterPktDataNotMask bit set to one, the
|
||
|
|
bit from the packet is equal to the corresponding bit
|
||
|
|
from the filterPktData, then the packet will fail this
|
||
|
|
data match.
|
||
|
|
|
||
|
|
Any packets that have not failed any of the three matches
|
||
|
|
above have passed this data match. In particular, a zero
|
||
|
|
length filter will match any packet.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
::= { filterEntry 4 }
|
||
|
|
|
||
|
|
filterPktDataMask OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The mask that is applied to the match process.
|
||
|
|
After adjusting this mask for the offset, only those
|
||
|
|
bits in the received packet that correspond to bits set
|
||
|
|
in this mask are relevant for further processing by the
|
||
|
|
|
||
|
|
match algorithm. The offset is applied to filterPktDataMask
|
||
|
|
in the same way it is applied to the filter. For the
|
||
|
|
purposes of the matching algorithm, if the associated
|
||
|
|
filterPktData object is longer than this mask, this mask is
|
||
|
|
conceptually extended with '1' bits until it reaches the
|
||
|
|
length of the filterPktData object.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
::= { filterEntry 5 }
|
||
|
|
|
||
|
|
filterPktDataNotMask OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The inversion mask that is applied to the match
|
||
|
|
process. After adjusting this mask for the offset,
|
||
|
|
those relevant bits in the received packet that correspond
|
||
|
|
to bits cleared in this mask must all be equal to their
|
||
|
|
corresponding bits in the filterPktData object for the packet
|
||
|
|
to be accepted. In addition, at least one of those relevant
|
||
|
|
bits in the received packet that correspond to bits set in
|
||
|
|
this mask must be different to its corresponding bit in the
|
||
|
|
filterPktData object.
|
||
|
|
|
||
|
|
For the purposes of the matching algorithm, if the associated
|
||
|
|
filterPktData object is longer than this mask, this mask is
|
||
|
|
conceptually extended with '0' bits until it reaches the
|
||
|
|
length of the filterPktData object.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
::= { filterEntry 6 }
|
||
|
|
|
||
|
|
filterPktStatus OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status that is to be matched with the input packet.
|
||
|
|
The only bits relevant to this match algorithm are those that
|
||
|
|
have the corresponding filterPktStatusMask bit equal to one.
|
||
|
|
The following two rules are then applied to every packet:
|
||
|
|
|
||
|
|
(1) For each relevant bit from the packet status with the
|
||
|
|
corresponding filterPktStatusNotMask bit set to zero, if
|
||
|
|
the bit from the packet status is not equal to the
|
||
|
|
|
||
|
|
corresponding bit from the filterPktStatus, then the
|
||
|
|
packet will fail this status match.
|
||
|
|
|
||
|
|
(2) If for every relevant bit from the packet status with the
|
||
|
|
corresponding filterPktStatusNotMask bit set to one, the
|
||
|
|
bit from the packet status is equal to the corresponding
|
||
|
|
bit from the filterPktStatus, then the packet will fail
|
||
|
|
this status match.
|
||
|
|
|
||
|
|
Any packets that have not failed either of the two matches
|
||
|
|
above have passed this status match. In particular, a zero
|
||
|
|
length status filter will match any packet's status.
|
||
|
|
|
||
|
|
The value of the packet status is a sum. This sum
|
||
|
|
initially takes the value zero. Then, for each
|
||
|
|
error, E, that has been discovered in this packet,
|
||
|
|
2 raised to a value representing E is added to the sum.
|
||
|
|
The errors and the bits that represent them are dependent
|
||
|
|
on the media type of the interface that this channel
|
||
|
|
is receiving packets from.
|
||
|
|
|
||
|
|
The errors defined for a packet captured off of an
|
||
|
|
Ethernet interface are as follows:
|
||
|
|
|
||
|
|
bit # Error
|
||
|
|
0 Packet is longer than 1518 octets
|
||
|
|
1 Packet is shorter than 64 octets
|
||
|
|
2 Packet experienced a CRC or Alignment error
|
||
|
|
|
||
|
|
For example, an Ethernet fragment would have a
|
||
|
|
value of 6 (2^1 + 2^2).
|
||
|
|
|
||
|
|
As this MIB is expanded to new media types, this object
|
||
|
|
will have other media-specific errors defined.
|
||
|
|
|
||
|
|
For the purposes of this status matching algorithm, if the
|
||
|
|
packet status is longer than this filterPktStatus object,
|
||
|
|
this object is conceptually extended with '0' bits until it
|
||
|
|
reaches the size of the packet status.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
::= { filterEntry 7 }
|
||
|
|
|
||
|
|
filterPktStatusMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The mask that is applied to the status match process.
|
||
|
|
Only those bits in the received packet that correspond to
|
||
|
|
bits set in this mask are relevant for further processing
|
||
|
|
by the status match algorithm. For the purposes
|
||
|
|
of the matching algorithm, if the associated filterPktStatus
|
||
|
|
object is longer than this mask, this mask is conceptually
|
||
|
|
extended with '1' bits until it reaches the size of the
|
||
|
|
filterPktStatus. In addition, if a packet status is longer
|
||
|
|
than this mask, this mask is conceptually extended with '0'
|
||
|
|
bits until it reaches the size of the packet status.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
::= { filterEntry 8 }
|
||
|
|
|
||
|
|
filterPktStatusNotMask OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The inversion mask that is applied to the status match
|
||
|
|
process. Those relevant bits in the received packet status
|
||
|
|
that correspond to bits cleared in this mask must all be
|
||
|
|
equal to their corresponding bits in the filterPktStatus
|
||
|
|
object for the packet to be accepted. In addition, at least
|
||
|
|
one of those relevant bits in the received packet status
|
||
|
|
that correspond to bits set in this mask must be different
|
||
|
|
to its corresponding bit in the filterPktStatus object for
|
||
|
|
the packet to be accepted.
|
||
|
|
|
||
|
|
For the purposes of the matching algorithm, if the associated
|
||
|
|
filterPktStatus object or a packet status is longer than this
|
||
|
|
mask, this mask is conceptually extended with '0' bits until
|
||
|
|
it reaches the longer of the lengths of the filterPktStatus
|
||
|
|
object and the packet status.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
filterStatus object is equal to valid(1)."
|
||
|
|
::= { filterEntry 9 }
|
||
|
|
|
||
|
|
filterOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { filterEntry 10 }
|
||
|
|
|
||
|
|
filterStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this filter entry."
|
||
|
|
::= { filterEntry 11 }
|
||
|
|
|
||
|
|
channelTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF ChannelEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of packet channel entries."
|
||
|
|
::= { filter 2 }
|
||
|
|
|
||
|
|
channelEntry OBJECT-TYPE
|
||
|
|
SYNTAX ChannelEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of parameters for a packet channel applied on a
|
||
|
|
particular interface. As an example, an instance of the
|
||
|
|
channelMatches object might be named channelMatches.3"
|
||
|
|
INDEX { channelIndex }
|
||
|
|
::= { channelTable 1 }
|
||
|
|
|
||
|
|
ChannelEntry ::= SEQUENCE {
|
||
|
|
channelIndex Integer32,
|
||
|
|
channelIfIndex Integer32,
|
||
|
|
channelAcceptType INTEGER,
|
||
|
|
channelDataControl INTEGER,
|
||
|
|
channelTurnOnEventIndex Integer32,
|
||
|
|
channelTurnOffEventIndex Integer32,
|
||
|
|
channelEventIndex Integer32,
|
||
|
|
channelEventStatus INTEGER,
|
||
|
|
channelMatches Counter32,
|
||
|
|
channelDescription DisplayString,
|
||
|
|
channelOwner OwnerString,
|
||
|
|
channelStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
channelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in the channel
|
||
|
|
table. Each such entry defines one channel, a logical
|
||
|
|
data and event stream.
|
||
|
|
|
||
|
|
It is suggested that before creating a channel, an
|
||
|
|
application should scan all instances of the
|
||
|
|
filterChannelIndex object to make sure that there are no
|
||
|
|
pre-existing filters that would be inadvertently be linked
|
||
|
|
to the channel."
|
||
|
|
::= { channelEntry 1 }
|
||
|
|
|
||
|
|
channelIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object uniquely identifies the
|
||
|
|
interface on this remote network monitoring device to which
|
||
|
|
the associated filters are applied to allow data into this
|
||
|
|
channel. The interface identified by a particular value
|
||
|
|
of this object is the same interface as identified by the
|
||
|
|
same value of the ifIndex object, defined in RFC 2233 [17].
|
||
|
|
|
||
|
|
The filters in this group are applied to all packets on
|
||
|
|
the local network segment attached to the identified
|
||
|
|
interface.
|
||
|
|
|
||
|
|
An agent may or may not be able to tell if fundamental
|
||
|
|
changes to the media of the interface have occurred and
|
||
|
|
necessitate an invalidation of this entry. For example, a
|
||
|
|
hot-pluggable ethernet card could be pulled out and replaced
|
||
|
|
by a token-ring card. In such a case, if the agent has such
|
||
|
|
knowledge of the change, it is recommended that it
|
||
|
|
invalidate this entry.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
channelStatus object is equal to valid(1)."
|
||
|
|
::= { channelEntry 2 }
|
||
|
|
|
||
|
|
channelAcceptType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
acceptMatched(1),
|
||
|
|
acceptFailed(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls the action of the filters
|
||
|
|
associated with this channel. If this object is equal
|
||
|
|
to acceptMatched(1), packets will be accepted to this
|
||
|
|
channel if they are accepted by both the packet data and
|
||
|
|
packet status matches of an associated filter. If
|
||
|
|
this object is equal to acceptFailed(2), packets will
|
||
|
|
be accepted to this channel only if they fail either
|
||
|
|
the packet data match or the packet status match of
|
||
|
|
each of the associated filters.
|
||
|
|
|
||
|
|
In particular, a channel with no associated filters will
|
||
|
|
match no packets if set to acceptMatched(1) case and will
|
||
|
|
match all packets in the acceptFailed(2) case.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
channelStatus object is equal to valid(1)."
|
||
|
|
::= { channelEntry 3 }
|
||
|
|
|
||
|
|
channelDataControl OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
on(1),
|
||
|
|
off(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls the flow of data through this channel.
|
||
|
|
If this object is on(1), data, status and events flow
|
||
|
|
through this channel. If this object is off(2), data,
|
||
|
|
status and events will not flow through this channel."
|
||
|
|
DEFVAL { off }
|
||
|
|
::= { channelEntry 4 }
|
||
|
|
|
||
|
|
channelTurnOnEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object identifies the event
|
||
|
|
that is configured to turn the associated
|
||
|
|
channelDataControl from off to on when the event is
|
||
|
|
generated. The event identified by a particular value
|
||
|
|
of this object is the same event as identified by the
|
||
|
|
same value of the eventIndex object. If there is no
|
||
|
|
corresponding entry in the eventTable, then no
|
||
|
|
association exists. In fact, if no event is intended
|
||
|
|
for this channel, channelTurnOnEventIndex must be
|
||
|
|
set to zero, a non-existent event index.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
channelStatus object is equal to valid(1)."
|
||
|
|
::= { channelEntry 5 }
|
||
|
|
|
||
|
|
channelTurnOffEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object identifies the event
|
||
|
|
that is configured to turn the associated
|
||
|
|
channelDataControl from on to off when the event is
|
||
|
|
generated. The event identified by a particular value
|
||
|
|
of this object is the same event as identified by the
|
||
|
|
same value of the eventIndex object. If there is no
|
||
|
|
corresponding entry in the eventTable, then no
|
||
|
|
association exists. In fact, if no event is intended
|
||
|
|
for this channel, channelTurnOffEventIndex must be
|
||
|
|
set to zero, a non-existent event index.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
channelStatus object is equal to valid(1)."
|
||
|
|
::= { channelEntry 6 }
|
||
|
|
|
||
|
|
channelEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of this object identifies the event
|
||
|
|
that is configured to be generated when the
|
||
|
|
associated channelDataControl is on and a packet
|
||
|
|
is matched. The event identified by a particular value
|
||
|
|
of this object is the same event as identified by the
|
||
|
|
same value of the eventIndex object. If there is no
|
||
|
|
corresponding entry in the eventTable, then no
|
||
|
|
association exists. In fact, if no event is intended
|
||
|
|
for this channel, channelEventIndex must be
|
||
|
|
set to zero, a non-existent event index.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
channelStatus object is equal to valid(1)."
|
||
|
|
::= { channelEntry 7 }
|
||
|
|
|
||
|
|
channelEventStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
eventReady(1),
|
||
|
|
eventFired(2),
|
||
|
|
eventAlwaysReady(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The event status of this channel.
|
||
|
|
|
||
|
|
If this channel is configured to generate events
|
||
|
|
when packets are matched, a means of controlling
|
||
|
|
the flow of those events is often needed. When
|
||
|
|
this object is equal to eventReady(1), a single
|
||
|
|
event may be generated, after which this object
|
||
|
|
will be set by the probe to eventFired(2). While
|
||
|
|
in the eventFired(2) state, no events will be
|
||
|
|
generated until the object is modified to
|
||
|
|
eventReady(1) (or eventAlwaysReady(3)). The
|
||
|
|
management station can thus easily respond to a
|
||
|
|
notification of an event by re-enabling this object.
|
||
|
|
|
||
|
|
If the management station wishes to disable this
|
||
|
|
flow control and allow events to be generated
|
||
|
|
at will, this object may be set to
|
||
|
|
eventAlwaysReady(3). Disabling the flow control
|
||
|
|
is discouraged as it can result in high network
|
||
|
|
traffic or other performance problems."
|
||
|
|
DEFVAL { eventReady }
|
||
|
|
::= { channelEntry 8 }
|
||
|
|
|
||
|
|
channelMatches OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times this channel has matched a packet.
|
||
|
|
Note that this object is updated even when
|
||
|
|
channelDataControl is set to off."
|
||
|
|
::= { channelEntry 9 }
|
||
|
|
|
||
|
|
channelDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..127))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A comment describing this channel."
|
||
|
|
::= { channelEntry 10 }
|
||
|
|
|
||
|
|
channelOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { channelEntry 11 }
|
||
|
|
|
||
|
|
channelStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this channel entry."
|
||
|
|
::= { channelEntry 12 }
|
||
|
|
|
||
|
|
-- The Packet Capture Group
|
||
|
|
|
||
|
|
-- Implementation of the Packet Capture group is optional. The Packet
|
||
|
|
-- Capture Group requires implementation of the Filter Group.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Packet Capture group allows packets to be captured
|
||
|
|
-- upon a filter match. The bufferControlTable controls
|
||
|
|
-- the captured packets output from a channel that is
|
||
|
|
-- associated with it. The captured packets are placed
|
||
|
|
-- in entries in the captureBufferTable. These entries are
|
||
|
|
-- associated with the bufferControlEntry on whose behalf they
|
||
|
|
-- were stored.
|
||
|
|
|
||
|
|
bufferControlTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF BufferControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of buffers control entries."
|
||
|
|
::= { capture 1 }
|
||
|
|
|
||
|
|
bufferControlEntry OBJECT-TYPE
|
||
|
|
SYNTAX BufferControlEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of parameters that control the collection of a stream
|
||
|
|
of packets that have matched filters. As an example, an
|
||
|
|
instance of the bufferControlCaptureSliceSize object might
|
||
|
|
be named bufferControlCaptureSliceSize.3"
|
||
|
|
INDEX { bufferControlIndex }
|
||
|
|
::= { bufferControlTable 1 }
|
||
|
|
|
||
|
|
BufferControlEntry ::= SEQUENCE {
|
||
|
|
bufferControlIndex Integer32,
|
||
|
|
bufferControlChannelIndex Integer32,
|
||
|
|
bufferControlFullStatus INTEGER,
|
||
|
|
bufferControlFullAction INTEGER,
|
||
|
|
bufferControlCaptureSliceSize Integer32,
|
||
|
|
bufferControlDownloadSliceSize Integer32,
|
||
|
|
bufferControlDownloadOffset Integer32,
|
||
|
|
bufferControlMaxOctetsRequested Integer32,
|
||
|
|
bufferControlMaxOctetsGranted Integer32,
|
||
|
|
bufferControlCapturedPackets Integer32,
|
||
|
|
bufferControlTurnOnTime TimeTicks,
|
||
|
|
bufferControlOwner OwnerString,
|
||
|
|
bufferControlStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
bufferControlIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry
|
||
|
|
in the bufferControl table. The value of this
|
||
|
|
index shall never be zero. Each such
|
||
|
|
entry defines one set of packets that is
|
||
|
|
captured and controlled by one or more filters."
|
||
|
|
::= { bufferControlEntry 1 }
|
||
|
|
|
||
|
|
bufferControlChannelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that identifies the channel that is the
|
||
|
|
source of packets for this bufferControl table.
|
||
|
|
The channel identified by a particular value of this
|
||
|
|
index is the same as identified by the same value of
|
||
|
|
the channelIndex object.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
bufferControlStatus object is equal to valid(1)."
|
||
|
|
::= { bufferControlEntry 2 }
|
||
|
|
|
||
|
|
bufferControlFullStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
|
||
|
|
spaceAvailable(1),
|
||
|
|
full(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object shows whether the buffer has room to
|
||
|
|
accept new packets or if it is full.
|
||
|
|
|
||
|
|
If the status is spaceAvailable(1), the buffer is
|
||
|
|
accepting new packets normally. If the status is
|
||
|
|
full(2) and the associated bufferControlFullAction
|
||
|
|
object is wrapWhenFull, the buffer is accepting new
|
||
|
|
packets by deleting enough of the oldest packets
|
||
|
|
to make room for new ones as they arrive. Otherwise,
|
||
|
|
if the status is full(2) and the
|
||
|
|
bufferControlFullAction object is lockWhenFull,
|
||
|
|
then the buffer has stopped collecting packets.
|
||
|
|
|
||
|
|
When this object is set to full(2) the probe must
|
||
|
|
not later set it to spaceAvailable(1) except in the
|
||
|
|
case of a significant gain in resources such as
|
||
|
|
an increase of bufferControlOctetsGranted. In
|
||
|
|
particular, the wrap-mode action of deleting old
|
||
|
|
packets to make room for newly arrived packets
|
||
|
|
must not affect the value of this object."
|
||
|
|
::= { bufferControlEntry 3 }
|
||
|
|
|
||
|
|
bufferControlFullAction OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
lockWhenFull(1),
|
||
|
|
wrapWhenFull(2) -- FIFO
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Controls the action of the buffer when it
|
||
|
|
reaches the full status. When in the lockWhenFull(1)
|
||
|
|
state and a packet is added to the buffer that
|
||
|
|
fills the buffer, the bufferControlFullStatus will
|
||
|
|
be set to full(2) and this buffer will stop capturing
|
||
|
|
packets."
|
||
|
|
::= { bufferControlEntry 4 }
|
||
|
|
|
||
|
|
bufferControlCaptureSliceSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of octets of each packet
|
||
|
|
that will be saved in this capture buffer.
|
||
|
|
For example, if a 1500 octet packet is received by
|
||
|
|
the probe and this object is set to 500, then only
|
||
|
|
500 octets of the packet will be stored in the
|
||
|
|
associated capture buffer. If this variable is set
|
||
|
|
to 0, the capture buffer will save as many octets
|
||
|
|
as is possible.
|
||
|
|
|
||
|
|
This object may not be modified if the associated
|
||
|
|
bufferControlStatus object is equal to valid(1)."
|
||
|
|
DEFVAL { 100 }
|
||
|
|
::= { bufferControlEntry 5 }
|
||
|
|
|
||
|
|
bufferControlDownloadSliceSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of octets of each packet
|
||
|
|
in this capture buffer that will be returned in
|
||
|
|
an SNMP retrieval of that packet. For example,
|
||
|
|
if 500 octets of a packet have been stored in the
|
||
|
|
associated capture buffer, the associated
|
||
|
|
bufferControlDownloadOffset is 0, and this
|
||
|
|
object is set to 100, then the captureBufferPacket
|
||
|
|
object that contains the packet will contain only
|
||
|
|
the first 100 octets of the packet.
|
||
|
|
|
||
|
|
A prudent manager will take into account possible
|
||
|
|
interoperability or fragmentation problems that may
|
||
|
|
occur if the download slice size is set too large.
|
||
|
|
In particular, conformant SNMP implementations are not
|
||
|
|
required to accept messages whose length exceeds 484
|
||
|
|
octets, although they are encouraged to support larger
|
||
|
|
datagrams whenever feasible."
|
||
|
|
DEFVAL { 100 }
|
||
|
|
::= { bufferControlEntry 6 }
|
||
|
|
|
||
|
|
bufferControlDownloadOffset OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The offset of the first octet of each packet
|
||
|
|
in this capture buffer that will be returned in
|
||
|
|
an SNMP retrieval of that packet. For example,
|
||
|
|
if 500 octets of a packet have been stored in the
|
||
|
|
associated capture buffer and this object is set to
|
||
|
|
100, then the captureBufferPacket object that
|
||
|
|
contains the packet will contain bytes starting
|
||
|
|
100 octets into the packet."
|
||
|
|
DEFVAL { 0 }
|
||
|
|
::= { bufferControlEntry 7 }
|
||
|
|
|
||
|
|
bufferControlMaxOctetsRequested OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The requested maximum number of octets to be
|
||
|
|
saved in this captureBuffer, including any
|
||
|
|
implementation-specific overhead. If this variable
|
||
|
|
is set to -1, the capture buffer will save as many
|
||
|
|
octets as is possible.
|
||
|
|
|
||
|
|
When this object is created or modified, the probe
|
||
|
|
should set bufferControlMaxOctetsGranted as closely
|
||
|
|
to this object as is possible for the particular probe
|
||
|
|
implementation and available resources. However, if
|
||
|
|
the object has the special value of -1, the probe
|
||
|
|
must set bufferControlMaxOctetsGranted to -1."
|
||
|
|
DEFVAL { -1 }
|
||
|
|
::= { bufferControlEntry 8 }
|
||
|
|
|
||
|
|
bufferControlMaxOctetsGranted OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The maximum number of octets that can be
|
||
|
|
saved in this captureBuffer, including overhead.
|
||
|
|
If this variable is -1, the capture buffer will save
|
||
|
|
as many octets as possible.
|
||
|
|
|
||
|
|
When the bufferControlMaxOctetsRequested object is
|
||
|
|
created or modified, the probe should set this object
|
||
|
|
as closely to the requested value as is possible for the
|
||
|
|
particular probe implementation and available resources.
|
||
|
|
However, if the request object has the special value
|
||
|
|
|
||
|
|
of -1, the probe must set this object to -1.
|
||
|
|
|
||
|
|
The probe must not lower this value except as a result of
|
||
|
|
a modification to the associated
|
||
|
|
bufferControlMaxOctetsRequested object.
|
||
|
|
|
||
|
|
When this maximum number of octets is reached
|
||
|
|
and a new packet is to be added to this
|
||
|
|
capture buffer and the corresponding
|
||
|
|
bufferControlFullAction is set to wrapWhenFull(2),
|
||
|
|
enough of the oldest packets associated with this
|
||
|
|
capture buffer shall be deleted by the agent so
|
||
|
|
that the new packet can be added. If the corresponding
|
||
|
|
bufferControlFullAction is set to lockWhenFull(1),
|
||
|
|
the new packet shall be discarded. In either case,
|
||
|
|
the probe must set bufferControlFullStatus to
|
||
|
|
full(2).
|
||
|
|
|
||
|
|
When the value of this object changes to a value less
|
||
|
|
than the current value, entries are deleted from
|
||
|
|
the captureBufferTable associated with this
|
||
|
|
bufferControlEntry. Enough of the
|
||
|
|
oldest of these captureBufferEntries shall be
|
||
|
|
deleted by the agent so that the number of octets
|
||
|
|
used remains less than or equal to the new value of
|
||
|
|
this object.
|
||
|
|
|
||
|
|
When the value of this object changes to a value greater
|
||
|
|
than the current value, the number of associated
|
||
|
|
captureBufferEntries may be allowed to grow."
|
||
|
|
::= { bufferControlEntry 9 }
|
||
|
|
|
||
|
|
bufferControlCapturedPackets OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets currently in this captureBuffer."
|
||
|
|
::= { bufferControlEntry 10 }
|
||
|
|
|
||
|
|
bufferControlTurnOnTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime when this capture buffer was
|
||
|
|
first turned on."
|
||
|
|
::= { bufferControlEntry 11 }
|
||
|
|
|
||
|
|
bufferControlOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it."
|
||
|
|
::= { bufferControlEntry 12 }
|
||
|
|
|
||
|
|
bufferControlStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this buffer Control Entry."
|
||
|
|
::= { bufferControlEntry 13 }
|
||
|
|
|
||
|
|
captureBufferTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CaptureBufferEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of packets captured off of a channel."
|
||
|
|
::= { capture 2 }
|
||
|
|
|
||
|
|
captureBufferEntry OBJECT-TYPE
|
||
|
|
SYNTAX CaptureBufferEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A packet captured off of an attached network. As an
|
||
|
|
example, an instance of the captureBufferPacketData
|
||
|
|
object might be named captureBufferPacketData.3.1783"
|
||
|
|
INDEX { captureBufferControlIndex, captureBufferIndex }
|
||
|
|
::= { captureBufferTable 1 }
|
||
|
|
|
||
|
|
CaptureBufferEntry ::= SEQUENCE {
|
||
|
|
captureBufferControlIndex Integer32,
|
||
|
|
captureBufferIndex Integer32,
|
||
|
|
captureBufferPacketID Integer32,
|
||
|
|
captureBufferPacketData OCTET STRING,
|
||
|
|
captureBufferPacketLength Integer32,
|
||
|
|
captureBufferPacketTime Integer32,
|
||
|
|
captureBufferPacketStatus Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
captureBufferControlIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the bufferControlEntry with which
|
||
|
|
this packet is associated."
|
||
|
|
::= { captureBufferEntry 1 }
|
||
|
|
|
||
|
|
captureBufferIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry
|
||
|
|
in the captureBuffer table associated with a
|
||
|
|
particular bufferControlEntry. This index will
|
||
|
|
start at 1 and increase by one for each new packet
|
||
|
|
added with the same captureBufferControlIndex.
|
||
|
|
|
||
|
|
Should this value reach 2147483647, the next packet
|
||
|
|
added with the same captureBufferControlIndex shall
|
||
|
|
cause this value to wrap around to 1."
|
||
|
|
::= { captureBufferEntry 2 }
|
||
|
|
|
||
|
|
captureBufferPacketID OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that describes the order of packets
|
||
|
|
that are received on a particular interface.
|
||
|
|
The packetID of a packet captured on an
|
||
|
|
interface is defined to be greater than the
|
||
|
|
packetID's of all packets captured previously on
|
||
|
|
the same interface. As the captureBufferPacketID
|
||
|
|
object has a maximum positive value of 2^31 - 1,
|
||
|
|
any captureBufferPacketID object shall have the
|
||
|
|
value of the associated packet's packetID mod 2^31."
|
||
|
|
::= { captureBufferEntry 3 }
|
||
|
|
|
||
|
|
captureBufferPacketData OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The data inside the packet, starting at the beginning
|
||
|
|
of the packet plus any offset specified in the
|
||
|
|
|
||
|
|
associated bufferControlDownloadOffset, including any
|
||
|
|
link level headers. The length of the data in this object
|
||
|
|
is the minimum of the length of the captured packet minus
|
||
|
|
the offset, the length of the associated
|
||
|
|
bufferControlCaptureSliceSize minus the offset, and the
|
||
|
|
associated bufferControlDownloadSliceSize. If this minimum
|
||
|
|
is less than zero, this object shall have a length of zero."
|
||
|
|
::= { captureBufferEntry 4 }
|
||
|
|
|
||
|
|
captureBufferPacketLength OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The actual length (off the wire) of the packet stored
|
||
|
|
in this entry, including FCS octets."
|
||
|
|
::= { captureBufferEntry 5 }
|
||
|
|
|
||
|
|
captureBufferPacketTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
UNITS "Milliseconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of milliseconds that had passed since
|
||
|
|
this capture buffer was first turned on when this
|
||
|
|
packet was captured."
|
||
|
|
::= { captureBufferEntry 6 }
|
||
|
|
|
||
|
|
captureBufferPacketStatus OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A value which indicates the error status of this packet.
|
||
|
|
|
||
|
|
The value of this object is defined in the same way as
|
||
|
|
filterPktStatus. The value is a sum. This sum
|
||
|
|
initially takes the value zero. Then, for each
|
||
|
|
error, E, that has been discovered in this packet,
|
||
|
|
2 raised to a value representing E is added to the sum.
|
||
|
|
|
||
|
|
The errors defined for a packet captured off of an
|
||
|
|
Ethernet interface are as follows:
|
||
|
|
|
||
|
|
bit # Error
|
||
|
|
0 Packet is longer than 1518 octets
|
||
|
|
|
||
|
|
1 Packet is shorter than 64 octets
|
||
|
|
2 Packet experienced a CRC or Alignment error
|
||
|
|
3 First packet in this capture buffer after
|
||
|
|
it was detected that some packets were
|
||
|
|
not processed correctly.
|
||
|
|
4 Packet's order in buffer is only approximate
|
||
|
|
(May only be set for packets sent from
|
||
|
|
the probe)
|
||
|
|
|
||
|
|
For example, an Ethernet fragment would have a
|
||
|
|
value of 6 (2^1 + 2^2).
|
||
|
|
|
||
|
|
As this MIB is expanded to new media types, this object
|
||
|
|
will have other media-specific errors defined."
|
||
|
|
::= { captureBufferEntry 7 }
|
||
|
|
|
||
|
|
-- The Event Group
|
||
|
|
|
||
|
|
-- Implementation of the Event group is optional.
|
||
|
|
-- Consult the MODULE-COMPLIANCE macro for the authoritative
|
||
|
|
-- conformance information for this MIB.
|
||
|
|
--
|
||
|
|
-- The Event group controls the generation and notification
|
||
|
|
-- of events from this device. Each entry in the eventTable
|
||
|
|
-- describes the parameters of the event that can be triggered.
|
||
|
|
-- Each event entry is fired by an associated condition located
|
||
|
|
-- elsewhere in the MIB. An event entry may also be associated
|
||
|
|
-- with a function elsewhere in the MIB that will be executed
|
||
|
|
-- when the event is generated. For example, a channel may
|
||
|
|
-- be turned on or off by the firing of an event.
|
||
|
|
--
|
||
|
|
-- Each eventEntry may optionally specify that a log entry
|
||
|
|
-- be created on its behalf whenever the event occurs.
|
||
|
|
-- Each entry may also specify that notification should
|
||
|
|
-- occur by way of SNMP trap messages. In this case, the
|
||
|
|
-- community for the trap message is given in the associated
|
||
|
|
-- eventCommunity object. The enterprise and specific trap
|
||
|
|
-- fields of the trap are determined by the condition that
|
||
|
|
-- triggered the event. Two traps are defined: risingAlarm and
|
||
|
|
-- fallingAlarm. If the eventTable is triggered by a condition
|
||
|
|
-- specified elsewhere, the enterprise and specific trap fields
|
||
|
|
-- must be specified for traps generated for that condition.
|
||
|
|
|
||
|
|
eventTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF EventEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of events to be generated."
|
||
|
|
::= { event 1 }
|
||
|
|
|
||
|
|
eventEntry OBJECT-TYPE
|
||
|
|
SYNTAX EventEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of parameters that describe an event to be generated
|
||
|
|
when certain conditions are met. As an example, an instance
|
||
|
|
of the eventLastTimeSent object might be named
|
||
|
|
eventLastTimeSent.6"
|
||
|
|
INDEX { eventIndex }
|
||
|
|
::= { eventTable 1 }
|
||
|
|
|
||
|
|
EventEntry ::= SEQUENCE {
|
||
|
|
eventIndex Integer32,
|
||
|
|
eventDescription DisplayString,
|
||
|
|
eventType INTEGER,
|
||
|
|
eventCommunity OCTET STRING,
|
||
|
|
eventLastTimeSent TimeTicks,
|
||
|
|
eventOwner OwnerString,
|
||
|
|
eventStatus EntryStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
eventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry in the
|
||
|
|
event table. Each such entry defines one event that
|
||
|
|
is to be generated when the appropriate conditions
|
||
|
|
occur."
|
||
|
|
::= { eventEntry 1 }
|
||
|
|
|
||
|
|
eventDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..127))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A comment describing this event entry."
|
||
|
|
::= { eventEntry 2 }
|
||
|
|
|
||
|
|
eventType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
log(2),
|
||
|
|
snmptrap(3), -- send an SNMP trap
|
||
|
|
logandtrap(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of notification that the probe will make
|
||
|
|
about this event. In the case of log, an entry is
|
||
|
|
made in the log table for each event. In the case of
|
||
|
|
snmp-trap, an SNMP trap is sent to one or more
|
||
|
|
management stations."
|
||
|
|
::= { eventEntry 3 }
|
||
|
|
|
||
|
|
eventCommunity OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..127))
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"If an SNMP trap is to be sent, it will be sent to
|
||
|
|
the SNMP community specified by this octet string."
|
||
|
|
::= { eventEntry 4 }
|
||
|
|
|
||
|
|
eventLastTimeSent OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime at the time this event
|
||
|
|
entry last generated an event. If this entry has
|
||
|
|
not generated any events, this value will be
|
||
|
|
zero."
|
||
|
|
::= { eventEntry 5 }
|
||
|
|
|
||
|
|
eventOwner OBJECT-TYPE
|
||
|
|
SYNTAX OwnerString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entity that configured this entry and is therefore
|
||
|
|
using the resources assigned to it.
|
||
|
|
|
||
|
|
If this object contains a string starting with 'monitor'
|
||
|
|
and has associated entries in the log table, all connected
|
||
|
|
management stations should retrieve those log entries,
|
||
|
|
as they may have significance to all management stations
|
||
|
|
connected to this device"
|
||
|
|
::= { eventEntry 6 }
|
||
|
|
|
||
|
|
eventStatus OBJECT-TYPE
|
||
|
|
SYNTAX EntryStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this event entry.
|
||
|
|
|
||
|
|
If this object is not equal to valid(1), all associated
|
||
|
|
log entries shall be deleted by the agent."
|
||
|
|
::= { eventEntry 7 }
|
||
|
|
|
||
|
|
--
|
||
|
|
logTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF LogEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of events that have been logged."
|
||
|
|
::= { event 2 }
|
||
|
|
|
||
|
|
logEntry OBJECT-TYPE
|
||
|
|
SYNTAX LogEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of data describing an event that has been
|
||
|
|
logged. For example, an instance of the logDescription
|
||
|
|
object might be named logDescription.6.47"
|
||
|
|
INDEX { logEventIndex, logIndex }
|
||
|
|
::= { logTable 1 }
|
||
|
|
|
||
|
|
LogEntry ::= SEQUENCE {
|
||
|
|
logEventIndex Integer32,
|
||
|
|
logIndex Integer32,
|
||
|
|
logTime TimeTicks,
|
||
|
|
logDescription DisplayString
|
||
|
|
}
|
||
|
|
|
||
|
|
logEventIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..65535)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The event entry that generated this log
|
||
|
|
entry. The log identified by a particular
|
||
|
|
value of this index is associated with the same
|
||
|
|
eventEntry as identified by the same value
|
||
|
|
of eventIndex."
|
||
|
|
::= { logEntry 1 }
|
||
|
|
|
||
|
|
logIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An index that uniquely identifies an entry
|
||
|
|
in the log table amongst those generated by the
|
||
|
|
same eventEntries. These indexes are
|
||
|
|
assigned beginning with 1 and increase by one
|
||
|
|
with each new log entry. The association
|
||
|
|
between values of logIndex and logEntries
|
||
|
|
is fixed for the lifetime of each logEntry.
|
||
|
|
The agent may choose to delete the oldest
|
||
|
|
instances of logEntry as required because of
|
||
|
|
lack of memory. It is an implementation-specific
|
||
|
|
matter as to when this deletion may occur."
|
||
|
|
::= { logEntry 2 }
|
||
|
|
|
||
|
|
logTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeTicks
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime when this log entry was created."
|
||
|
|
::= { logEntry 3 }
|
||
|
|
|
||
|
|
logDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..255))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An implementation dependent description of the
|
||
|
|
event that activated this log entry."
|
||
|
|
::= { logEntry 4 }
|
||
|
|
|
||
|
|
-- Remote Network Monitoring Traps
|
||
|
|
|
||
|
|
rmonEventsV2 OBJECT-IDENTITY
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Definition point for RMON notifications."
|
||
|
|
::= { rmon 0 }
|
||
|
|
|
||
|
|
risingAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
|
||
|
|
alarmValue, alarmRisingThreshold }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SNMP trap that is generated when an alarm
|
||
|
|
entry crosses its rising threshold and generates
|
||
|
|
an event that is configured for sending SNMP
|
||
|
|
traps."
|
||
|
|
::= { rmonEventsV2 1 }
|
||
|
|
|
||
|
|
fallingAlarm NOTIFICATION-TYPE
|
||
|
|
OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
|
||
|
|
alarmValue, alarmFallingThreshold }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The SNMP trap that is generated when an alarm
|
||
|
|
entry crosses its falling threshold and generates
|
||
|
|
an event that is configured for sending SNMP
|
||
|
|
traps."
|
||
|
|
::= { rmonEventsV2 2 }
|
||
|
|
|
||
|
|
-- Conformance information
|
||
|
|
|
||
|
|
rmonCompliances OBJECT IDENTIFIER ::= { rmonConformance 9 }
|
||
|
|
rmonGroups OBJECT IDENTIFIER ::= { rmonConformance 10 }
|
||
|
|
|
||
|
|
-- Compliance Statements
|
||
|
|
rmonCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The requirements for conformance to the RMON MIB. At least
|
||
|
|
one of the groups in this module must be implemented to
|
||
|
|
conform to the RMON MIB. Implementations of this MIB
|
||
|
|
must also implement the system group of MIB-II [16] and the
|
||
|
|
IF-MIB [17]."
|
||
|
|
MODULE -- this module
|
||
|
|
|
||
|
|
GROUP rmonEtherStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Ethernet Statistics Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonHistoryControlGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON History Control Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonEthernetHistoryGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Ethernet History Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonAlarmGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Alarm Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonHostGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Host Group is mandatory when the
|
||
|
|
rmonHostTopNGroup is implemented."
|
||
|
|
|
||
|
|
GROUP rmonHostTopNGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Host Top N Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonMatrixGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Matrix Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonFilterGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Filter Group is mandatory when the
|
||
|
|
rmonPacketCaptureGroup is implemented."
|
||
|
|
|
||
|
|
GROUP rmonPacketCaptureGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Packet Capture Group is optional."
|
||
|
|
|
||
|
|
GROUP rmonEventGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Event Group is mandatory when the
|
||
|
|
rmonAlarmGroup is implemented."
|
||
|
|
::= { rmonCompliances 1 }
|
||
|
|
|
||
|
|
rmonEtherStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
etherStatsIndex, etherStatsDataSource,
|
||
|
|
etherStatsDropEvents, etherStatsOctets, etherStatsPkts,
|
||
|
|
etherStatsBroadcastPkts, etherStatsMulticastPkts,
|
||
|
|
etherStatsCRCAlignErrors, etherStatsUndersizePkts,
|
||
|
|
etherStatsOversizePkts, etherStatsFragments,
|
||
|
|
etherStatsJabbers, etherStatsCollisions,
|
||
|
|
etherStatsPkts64Octets, etherStatsPkts65to127Octets,
|
||
|
|
etherStatsPkts128to255Octets,
|
||
|
|
etherStatsPkts256to511Octets,
|
||
|
|
etherStatsPkts512to1023Octets,
|
||
|
|
etherStatsPkts1024to1518Octets,
|
||
|
|
etherStatsOwner, etherStatsStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Ethernet Statistics Group."
|
||
|
|
::= { rmonGroups 1 }
|
||
|
|
|
||
|
|
rmonHistoryControlGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
historyControlIndex, historyControlDataSource,
|
||
|
|
historyControlBucketsRequested,
|
||
|
|
historyControlBucketsGranted, historyControlInterval,
|
||
|
|
historyControlOwner, historyControlStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON History Control Group."
|
||
|
|
::= { rmonGroups 2 }
|
||
|
|
|
||
|
|
rmonEthernetHistoryGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
etherHistoryIndex, etherHistorySampleIndex,
|
||
|
|
etherHistoryIntervalStart, etherHistoryDropEvents,
|
||
|
|
etherHistoryOctets, etherHistoryPkts,
|
||
|
|
etherHistoryBroadcastPkts, etherHistoryMulticastPkts,
|
||
|
|
etherHistoryCRCAlignErrors, etherHistoryUndersizePkts,
|
||
|
|
etherHistoryOversizePkts, etherHistoryFragments,
|
||
|
|
etherHistoryJabbers, etherHistoryCollisions,
|
||
|
|
etherHistoryUtilization
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Ethernet History Group."
|
||
|
|
::= { rmonGroups 3 }
|
||
|
|
|
||
|
|
rmonAlarmGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
alarmIndex, alarmInterval, alarmVariable,
|
||
|
|
alarmSampleType, alarmValue, alarmStartupAlarm,
|
||
|
|
alarmRisingThreshold, alarmFallingThreshold,
|
||
|
|
alarmRisingEventIndex, alarmFallingEventIndex,
|
||
|
|
alarmOwner, alarmStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Alarm Group."
|
||
|
|
::= { rmonGroups 4 }
|
||
|
|
|
||
|
|
rmonHostGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
hostControlIndex, hostControlDataSource,
|
||
|
|
hostControlTableSize, hostControlLastDeleteTime,
|
||
|
|
hostControlOwner, hostControlStatus,
|
||
|
|
hostAddress, hostCreationOrder, hostIndex,
|
||
|
|
hostInPkts, hostOutPkts, hostInOctets,
|
||
|
|
hostOutOctets, hostOutErrors, hostOutBroadcastPkts,
|
||
|
|
hostOutMulticastPkts, hostTimeAddress,
|
||
|
|
hostTimeCreationOrder, hostTimeIndex,
|
||
|
|
hostTimeInPkts, hostTimeOutPkts, hostTimeInOctets,
|
||
|
|
hostTimeOutOctets, hostTimeOutErrors,
|
||
|
|
hostTimeOutBroadcastPkts, hostTimeOutMulticastPkts
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Host Group."
|
||
|
|
::= { rmonGroups 5 }
|
||
|
|
|
||
|
|
rmonHostTopNGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
hostTopNControlIndex, hostTopNHostIndex,
|
||
|
|
hostTopNRateBase, hostTopNTimeRemaining,
|
||
|
|
hostTopNDuration, hostTopNRequestedSize,
|
||
|
|
hostTopNGrantedSize, hostTopNStartTime,
|
||
|
|
hostTopNOwner, hostTopNStatus,
|
||
|
|
hostTopNReport, hostTopNIndex,
|
||
|
|
hostTopNAddress, hostTopNRate
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Host Top 'N' Group."
|
||
|
|
::= { rmonGroups 6 }
|
||
|
|
|
||
|
|
rmonMatrixGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
matrixControlIndex, matrixControlDataSource,
|
||
|
|
matrixControlTableSize, matrixControlLastDeleteTime,
|
||
|
|
matrixControlOwner, matrixControlStatus,
|
||
|
|
matrixSDSourceAddress, matrixSDDestAddress,
|
||
|
|
matrixSDIndex, matrixSDPkts,
|
||
|
|
matrixSDOctets, matrixSDErrors,
|
||
|
|
matrixDSSourceAddress, matrixDSDestAddress,
|
||
|
|
matrixDSIndex, matrixDSPkts,
|
||
|
|
matrixDSOctets, matrixDSErrors
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Matrix Group."
|
||
|
|
::= { rmonGroups 7 }
|
||
|
|
|
||
|
|
rmonFilterGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
|
||
|
|
filterIndex, filterChannelIndex, filterPktDataOffset,
|
||
|
|
filterPktData, filterPktDataMask,
|
||
|
|
filterPktDataNotMask, filterPktStatus,
|
||
|
|
filterPktStatusMask, filterPktStatusNotMask,
|
||
|
|
filterOwner, filterStatus,
|
||
|
|
channelIndex, channelIfIndex, channelAcceptType,
|
||
|
|
channelDataControl, channelTurnOnEventIndex,
|
||
|
|
channelTurnOffEventIndex, channelEventIndex,
|
||
|
|
channelEventStatus, channelMatches,
|
||
|
|
channelDescription, channelOwner, channelStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Filter Group."
|
||
|
|
::= { rmonGroups 8 }
|
||
|
|
|
||
|
|
rmonPacketCaptureGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
bufferControlIndex, bufferControlChannelIndex,
|
||
|
|
bufferControlFullStatus, bufferControlFullAction,
|
||
|
|
bufferControlCaptureSliceSize,
|
||
|
|
bufferControlDownloadSliceSize,
|
||
|
|
bufferControlDownloadOffset,
|
||
|
|
bufferControlMaxOctetsRequested,
|
||
|
|
bufferControlMaxOctetsGranted,
|
||
|
|
bufferControlCapturedPackets,
|
||
|
|
bufferControlTurnOnTime,
|
||
|
|
bufferControlOwner, bufferControlStatus,
|
||
|
|
captureBufferControlIndex, captureBufferIndex,
|
||
|
|
captureBufferPacketID, captureBufferPacketData,
|
||
|
|
captureBufferPacketLength, captureBufferPacketTime,
|
||
|
|
captureBufferPacketStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Packet Capture Group."
|
||
|
|
::= { rmonGroups 9 }
|
||
|
|
|
||
|
|
rmonEventGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
eventIndex, eventDescription, eventType,
|
||
|
|
eventCommunity, eventLastTimeSent,
|
||
|
|
eventOwner, eventStatus,
|
||
|
|
logEventIndex, logIndex, logTime,
|
||
|
|
logDescription
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Event Group."
|
||
|
|
::= { rmonGroups 10 }
|
||
|
|
|
||
|
|
rmonNotificationGroup NOTIFICATION-GROUP
|
||
|
|
NOTIFICATIONS { risingAlarm, fallingAlarm }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The RMON Notification Group."
|
||
|
|
::= { rmonGroups 11 }
|
||
|
|
END
|