mibs/MIBS/SNMP-PROXY-MIB

295 lines
8.9 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
SNMP-PROXY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules
FROM SNMPv2-SMI
RowStatus,
StorageType
FROM SNMPv2-TC
SnmpEngineID,
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
SnmpTagValue
FROM SNMP-TARGET-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF;
snmpProxyMIB MODULE-IDENTITY
LAST-UPDATED "200210140000Z"
ORGANIZATION "IETF SNMPv3 Working Group"
CONTACT-INFO
"WG-email: snmpv3@lists.tislabs.com
Subscribe: majordomo@lists.tislabs.com
In message body: subscribe snmpv3
Co-Chair: Russ Mundy
Network Associates Laboratories
Postal: 15204 Omega Drive, Suite 300
Rockville, MD 20850-4601
USA
EMail: mundy@tislabs.com
Phone: +1 301-947-7107
Co-Chair: David Harrington
Enterasys Networks
Postal: 35 Industrial Way
P. O. Box 5004
Rochester, New Hampshire 03866-5005
USA
EMail: dbh@enterasys.com
Phone: +1 603-337-2614
Co-editor: David B. Levi
Nortel Networks
Postal: 3505 Kesterwood Drive
Knoxville, Tennessee 37918
EMail: dlevi@nortelnetworks.com
Phone: +1 865 686 0432
Co-editor: Paul Meyer
Secure Computing Corporation
Postal: 2675 Long Lake Road
Roseville, Minnesota 55113
EMail: paul_meyer@securecomputing.com
Phone: +1 651 628 1592
Co-editor: Bob Stewart
Retired"
DESCRIPTION
"This MIB module defines MIB objects which provide
mechanisms to remotely configure the parameters
used by a proxy forwarding application.
Copyright (C) The Internet Society (2002). This
version of this MIB module is part of RFC 3413;
see the RFC itself for full legal notices.
"
REVISION "200210140000Z" -- 14 October 2002
DESCRIPTION "Clarifications, published as
RFC 3413."
REVISION "199808040000Z" -- 4 August 1998
DESCRIPTION "Clarifications, published as
RFC 2573."
REVISION "199707140000Z" -- 14 July 1997
DESCRIPTION "The initial revision, published as RFC2273."
::= { snmpModules 14 }
snmpProxyObjects OBJECT IDENTIFIER ::= { snmpProxyMIB 1 }
snmpProxyConformance OBJECT IDENTIFIER ::= { snmpProxyMIB 3 }
--
--
-- The snmpProxyObjects group
--
--
snmpProxyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpProxyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of translation parameters used by proxy forwarder
applications for forwarding SNMP messages."
::= { snmpProxyObjects 2 }
snmpProxyEntry OBJECT-TYPE
SYNTAX SnmpProxyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of translation parameters used by a proxy forwarder
application for forwarding SNMP messages.
Entries in the snmpProxyTable are created and deleted
using the snmpProxyRowStatus object."
INDEX { IMPLIED snmpProxyName }
::= { snmpProxyTable 1 }
SnmpProxyEntry ::= SEQUENCE {
snmpProxyName SnmpAdminString,
snmpProxyType INTEGER,
snmpProxyContextEngineID SnmpEngineID,
snmpProxyContextName SnmpAdminString,
snmpProxyTargetParamsIn SnmpAdminString,
snmpProxySingleTargetOut SnmpAdminString,
snmpProxyMultipleTargetOut SnmpTagValue,
snmpProxyStorageType StorageType,
snmpProxyRowStatus RowStatus
}
snmpProxyName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The locally arbitrary, but unique identifier associated
with this snmpProxyEntry."
::= { snmpProxyEntry 1 }
snmpProxyType OBJECT-TYPE
SYNTAX INTEGER {
read(1),
write(2),
trap(3),
inform(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of message that may be forwarded using
the translation parameters defined by this entry."
::= { snmpProxyEntry 2 }
snmpProxyContextEngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contextEngineID contained in messages that
may be forwarded using the translation parameters
defined by this entry."
::= { snmpProxyEntry 3 }
snmpProxyContextName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contextName contained in messages that may be
forwarded using the translation parameters defined
by this entry.
This object is optional, and if not supported, the
contextName contained in a message is ignored when
selecting an entry in the snmpProxyTable."
::= { snmpProxyEntry 4 }
snmpProxyTargetParamsIn OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects an entry in the snmpTargetParamsTable.
The selected entry is used to determine which row of the
snmpProxyTable to use for forwarding received messages."
::= { snmpProxyEntry 5 }
snmpProxySingleTargetOut OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects a management target defined in the
snmpTargetAddrTable (in the SNMP-TARGET-MIB). The
selected target is defined by an entry in the
snmpTargetAddrTable whose index value (snmpTargetAddrName)
is equal to this object.
This object is only used when selection of a single
target is required (i.e. when forwarding an incoming
read or write request)."
::= { snmpProxyEntry 6 }
snmpProxyMultipleTargetOut OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object selects a set of management targets defined
in the snmpTargetAddrTable (in the SNMP-TARGET-MIB).
This object is only used when selection of multiple
targets is required (i.e. when forwarding an incoming
notification)."
::= { snmpProxyEntry 7 }
snmpProxyStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { snmpProxyEntry 8 }
snmpProxyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
The following objects may not be modified while the
value of this object is active(1):
- snmpProxyType
- snmpProxyContextEngineID
- snmpProxyContextName
- snmpProxyTargetParamsIn
- snmpProxySingleTargetOut
- snmpProxyMultipleTargetOut"
::= { snmpProxyEntry 9 }
--
--
-- Conformance information
--
--
snmpProxyCompliances OBJECT IDENTIFIER ::=
{ snmpProxyConformance 1 }
snmpProxyGroups OBJECT IDENTIFIER ::=
{ snmpProxyConformance 2 }
--
--
-- Compliance statements
--
--
snmpProxyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which include
a proxy forwarding application."
MODULE SNMP-TARGET-MIB
MANDATORY-GROUPS { snmpTargetBasicGroup,
snmpTargetResponseGroup }
MODULE -- This Module
MANDATORY-GROUPS { snmpProxyGroup }
::= { snmpProxyCompliances 1 }
snmpProxyGroup OBJECT-GROUP
OBJECTS {
snmpProxyType,
snmpProxyContextEngineID,
snmpProxyContextName,
snmpProxyTargetParamsIn,
snmpProxySingleTargetOut,
snmpProxyMultipleTargetOut,
snmpProxyStorageType,
snmpProxyRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing remote configuration of
management target translation parameters for use by
proxy forwarder applications."
::= { snmpProxyGroups 3 }
END