david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/accedian/ACD-SA-MIB

1166 lines
38 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2011, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
ACD-SA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Gauge32
FROM SNMPv2-SMI
DisplayString, DateAndTime, TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
acdMibs
FROM ACCEDIAN-SMI;
acdSa MODULE-IDENTITY
LAST-UPDATED "201112210100Z"
ORGANIZATION "Accedian Networks, Inc."
CONTACT-INFO
"Accedian Technical Assistance Center
Accedian Networks, Inc.
4878 Levy, suite 202
Saint-Laurent, Quebec Canada H4R 2P1
E-mail: support@accedian.com"
DESCRIPTION
"The Service Availability database for this Accedian Networks device."
REVISION "201112210100Z" -- 21 Dec 2011
DESCRIPTION
"Add support for ETH-SLM metrics."
REVISION "201103150100Z" -- 15 Mars 2011
DESCRIPTION
"Initial version of MIB module ACD-SA-MIB."
::= { acdMibs 12 }
acdSaNotifications OBJECT IDENTIFIER ::= { acdSa 0 }
acdSaMIBObjects OBJECT IDENTIFIER ::= { acdSa 1 }
acdSaConformance OBJECT IDENTIFIER ::= { acdSa 2 }
acdSaConfig OBJECT IDENTIFIER ::= { acdSaMIBObjects 1 }
acdSaCounter OBJECT IDENTIFIER ::= { acdSaMIBObjects 2 }
acdSaStatus OBJECT IDENTIFIER ::= { acdSaMIBObjects 3 }
---------------------------------------------------------------------------
-- Textual conventions
---------------------------------------------------------------------------
AcdSaMetricType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a type of metric that can be used in an
instance of Service Availability."
SYNTAX INTEGER {
metricPaaPlr(1),
metricPaaOwDelay(2),
metricPaaOwDv(3),
metricPaaTwDelay(4),
metricPaaTwDv(5),
metricCfmPlr(6),
metricCfmOwDelay(7),
metricCfmOwDv(8),
metricCfmTwDelay(9),
metricCfmTwDv(10),
metricCfmSlmNearEndPlr(11),
metricCfmSlmFarEndPlr(12)
}
AcdSaValidFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The validity flag can have three values: valid, adjusted, or pending.
The value of valid indicates the metrics are calculated normally.
The value of adjusted is used to indicate a change occurred in the
configuration during the reporting period which may impact the service
availability calculation.
The value of pending indicates that the counters were reset in the
middle of a time interval."
SYNTAX INTEGER {
valid(1),
adjusted(2),
pending(3)
}
AcdSaAdminStateFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This flag is used for the administrative state.
The value IS indicates the state is In-Service. The value OOS
indicates the state is Out-of-Service."
SYNTAX INTEGER {
is(1),
oos(2)
}
AcdSaOperStateFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This flag is used for the operational state.
The value IS indicates the state is In-Service. The value OOS
indicates the state is Out-of-Service. The value oos-au indicates
the state is Out-of-Service-Autonomous. This state is entered when
all of the metrics associated with the service instance are disabled."
SYNTAX INTEGER {
is(1),
oos(2),
oosAu(3)
}
---------------------------------------------------------------------------
-- The Service configuration table
-- This table contains all Service entry configurations.
---------------------------------------------------------------------------
acdSaServiceConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaServiceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaConfig 1 }
acdSaServiceConfigEntry OBJECT-TYPE
SYNTAX AcdSaServiceConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all settings for a Service."
INDEX { acdSaServiceIndex }
::= { acdSaServiceConfigTable 1 }
AcdSaServiceConfigEntry ::= SEQUENCE {
acdSaServiceIndex Unsigned32,
acdSaServiceConfigRowStatus RowStatus,
acdSaServiceConfigName DisplayString,
acdSaServiceConfigAdminState AcdSaAdminStateFlag,
acdSaServiceConfigReportingPeriod Unsigned32,
acdSaServiceConfigUaWindowSize Unsigned32,
acdSaServiceConfigHliWindowSize Unsigned32,
acdSaServiceConfigTimeInterval Unsigned32
}
acdSaServiceIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each service instance."
::= { acdSaServiceConfigEntry 1 }
acdSaServiceConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new Service you shall provide a unique name for an empty
row with the RowStatus set to Create and Go."
::= { acdSaServiceConfigEntry 2 }
acdSaServiceConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique name used to identify the Service."
::= { acdSaServiceConfigEntry 3 }
acdSaServiceConfigAdminState OBJECT-TYPE
SYNTAX AcdSaAdminStateFlag
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state is(1) or oos(2)."
DEFVAL { 2 }
::= { acdSaServiceConfigEntry 4 }
acdSaServiceConfigReportingPeriod OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A reporting period over which availability counters are evaluated
in addition to the monotonic counters (In minutes)."
DEFVAL { 15 }
::= { acdSaServiceConfigEntry 5 }
acdSaServiceConfigUaWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of consecutive seconds over which to assess unavailability."
DEFVAL { 10 }
::= { acdSaServiceConfigEntry 6 }
acdSaServiceConfigHliWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of consecutive Time Intervals used to assess High Loss Intervals for this instance."
DEFVAL { 3 }
::= { acdSaServiceConfigEntry 7 }
acdSaServiceConfigTimeInterval OBJECT-TYPE
SYNTAX Unsigned32 (1 .. 60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of time during which the metric is evaluated. Allowed values
are 1, 5, 10, 20, or 60."
DEFVAL { 1 }
::= { acdSaServiceConfigEntry 8 }
---------------------------------------------------------------------------
-- The Metric configuration table
-- This table contains all Metric entry configurations.
---------------------------------------------------------------------------
acdSaMetricConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaMetricConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ....."
::= { acdSaConfig 2 }
acdSaMetricConfigEntry OBJECT-TYPE
SYNTAX AcdSaMetricConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all settings for a Metric."
INDEX { acdSaServiceIndex,
acdSaMetricIndex }
::= { acdSaMetricConfigTable 1 }
AcdSaMetricConfigEntry ::= SEQUENCE {
acdSaMetricIndex Unsigned32,
acdSaMetricConfigRowStatus RowStatus,
acdSaMetricConfigName DisplayString,
acdSaMetricConfigSrcName DisplayString,
acdSaMetricConfigType AcdSaMetricType,
acdSaMetricConfigThreshold Unsigned32
}
acdSaMetricIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for each metric instance."
::= { acdSaMetricConfigEntry 1 }
acdSaMetricConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"All columns must have a valid value before a row can be activated. To
create a new Service you shall provide the a unique name for an empty
row with the RowStatus set to Create and Go. To delete the VLAN set
you need to set the RowStatus to destroy."
::= { acdSaMetricConfigEntry 2 }
acdSaMetricConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique name used to identify the Metric."
::= { acdSaMetricConfigEntry 3 }
acdSaMetricConfigSrcName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique name used to identify the source metric."
::= { acdSaMetricConfigEntry 4 }
acdSaMetricConfigType OBJECT-TYPE
SYNTAX AcdSaMetricType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the Service Availability entry."
DEFVAL { metricCfmTwDelay }
::= { acdSaMetricConfigEntry 5 }
acdSaMetricConfigThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the delay threshold for this metric when type is
one of metric delay parameters (in micro-seconds). Indicates
the packet loss threshold for this metric when type is one of
packet-loss parameter expressed in millionth of percent
(1,000,000 is 1%)."
DEFVAL { 0 }
::= { acdSaMetricConfigEntry 6 }
---------------------------------------------------------------------------
-- The Service counters table
-- This table contains all services history counters.
---------------------------------------------------------------------------
acdSaServiceCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaServiceCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaCounter 1 }
acdSaServiceCounterEntry OBJECT-TYPE
SYNTAX AcdSaServiceCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all counters for a Service."
INDEX { acdSaServiceIndex }
::= { acdSaServiceCounterTable 1 }
AcdSaServiceCounterEntry ::= SEQUENCE {
acdSaServiceCounterPeriodIndex Unsigned32,
acdSaServiceCounterValidFlag AcdSaValidFlag,
acdSaServiceCounterUpTime Unsigned32,
acdSaServiceCounterUaTime Unsigned32,
acdSaServiceCounterMaintTime Unsigned32,
acdSaServiceCounterAvailRatio Unsigned32,
acdSaServiceCounterGaps Unsigned32,
acdSaServiceCounterLargestGap Unsigned32,
acdSaServiceCounterChliTime Unsigned32,
acdSaServiceCounterChliRatio Unsigned32
}
acdSaServiceCounterPeriodIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular sample this entry
represents among all samples associated with the same service
instance. This index starts at 1 and increases by one as each new
period."
::= { acdSaServiceCounterEntry 1 }
acdSaServiceCounterValidFlag OBJECT-TYPE
SYNTAX AcdSaValidFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the service counter during this sampling
interval."
::= { acdSaServiceCounterEntry 2 }
acdSaServiceCounterUpTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uptime is a measure of the time a service has been up during this
sampling interval."
::= { acdSaServiceCounterEntry 3 }
acdSaServiceCounterUaTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UaTime is a measure of the time a service has been unavailable
during this sampling interval."
::= { acdSaServiceCounterEntry 4 }
acdSaServiceCounterMaintTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MaintTime is a measure of the time a service has been in maintenance
during this sampling interval."
::= { acdSaServiceCounterEntry 5 }
acdSaServiceCounterAvailRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the availability ratio in millionth of a percent
(1,000,000 is 1%)."
::= { acdSaServiceCounterEntry 6 }
acdSaServiceCounterGaps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gap shall be the number of time the state change from available
to unavailable."
::= { acdSaServiceCounterEntry 7 }
acdSaServiceCounterLargestGap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest gap shall be the largest number of consecutive unavailable
second."
::= { acdSaServiceCounterEntry 8 }
acdSaServiceCounterChliTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CHLI time is a counter which increments for every high loss interval.
It is only reset to zero when one of the following conditions occur:
1) device reboot 2) explicit counter reset."
::= { acdSaServiceCounterEntry 9 }
acdSaServiceCounterChliRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of high loss intervals divided by the uptime minus the sum of
maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%)."
::= { acdSaServiceCounterEntry 10 }
---------------------------------------------------------------------------
-- The Service History counters table
-- This table contains all services history counters.
---------------------------------------------------------------------------
acdSaServiceHistCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaServiceHistCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaCounter 2 }
acdSaServiceHistCounterEntry OBJECT-TYPE
SYNTAX AcdSaServiceHistCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all counters for a Service."
INDEX { acdSaServiceIndex,
acdSaServiceHistCounterPeriodIndex }
::= { acdSaServiceHistCounterTable 1 }
AcdSaServiceHistCounterEntry ::= SEQUENCE {
acdSaServiceHistCounterPeriodIndex Unsigned32,
acdSaServiceHistCounterIntervalEnd DateAndTime,
acdSaServiceHistCounterValidFlag AcdSaValidFlag,
acdSaServiceHistCounterUpTime Unsigned32,
acdSaServiceHistCounterUaTime Unsigned32,
acdSaServiceHistCounterMaintTime Unsigned32,
acdSaServiceHistCounterAvailRatio Unsigned32,
acdSaServiceHistCounterGaps Unsigned32,
acdSaServiceHistCounterLargestGap Unsigned32,
acdSaServiceHistCounterChliTime Unsigned32,
acdSaServiceHistCounterChliRatio Unsigned32
}
acdSaServiceHistCounterPeriodIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular sample this entry
represents among all samples associated with the same service
instance. This index starts at 1 and increases by one as each new
period."
::= { acdSaServiceHistCounterEntry 1 }
acdSaServiceHistCounterIntervalEnd OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time of the end of this entry."
::= { acdSaServiceHistCounterEntry 2 }
acdSaServiceHistCounterValidFlag OBJECT-TYPE
SYNTAX AcdSaValidFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the service counter during this sampling
interval."
::= { acdSaServiceHistCounterEntry 3 }
acdSaServiceHistCounterUpTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uptime is a measure of the time a service has been up during this
sampling interval."
::= { acdSaServiceHistCounterEntry 4 }
acdSaServiceHistCounterUaTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UaTime is a measure of the time a service has been unavailable
during this sampling interval."
::= { acdSaServiceHistCounterEntry 5 }
acdSaServiceHistCounterMaintTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MaintTime is a measure of the time a service has been in maintenance
during this sampling interval."
::= { acdSaServiceHistCounterEntry 6 }
acdSaServiceHistCounterAvailRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the availability ratio in millionth of a percent
(1,000,000 is 1%)."
::= { acdSaServiceHistCounterEntry 7 }
acdSaServiceHistCounterGaps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gap shall be the number of time the state change from available
to unavailable."
::= { acdSaServiceHistCounterEntry 8 }
acdSaServiceHistCounterLargestGap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest gap shall be the largest number of consecutive unavailable
second."
::= { acdSaServiceHistCounterEntry 9 }
acdSaServiceHistCounterChliTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CHLI time is a counter which increments for every High Loss Interval.
It is only reset to zero when one of the following conditions occur:
1) device reboot 2) explicit counter reset."
::= { acdSaServiceHistCounterEntry 10 }
acdSaServiceHistCounterChliRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of high loss intervals divided by the uptime minus the sum of
maintenance time and unavailable time, expressed in millionth of a percent (1,000,000 is 1%)."
::= { acdSaServiceHistCounterEntry 11 }
---------------------------------------------------------------------------
-- The Monotonic Service counters table
-- This table contains all services monotonic counters.
---------------------------------------------------------------------------
acdSaServiceMonoCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaServiceMonoCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaCounter 3 }
acdSaServiceMonoCounterEntry OBJECT-TYPE
SYNTAX AcdSaServiceMonoCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all monotonic counters for a Service."
INDEX { acdSaServiceIndex }
::= { acdSaServiceMonoCounterTable 1 }
AcdSaServiceMonoCounterEntry ::= SEQUENCE {
acdSaServiceMonoCounterValidFlag AcdSaValidFlag,
acdSaServiceMonoCounterUpTime Unsigned32,
acdSaServiceMonoCounterUaTime Unsigned32,
acdSaServiceMonoCounterMaintTime Unsigned32,
acdSaServiceMonoCounterAvailRatio Unsigned32,
acdSaServiceMonoCounterGaps Unsigned32,
acdSaServiceMonoCounterLargestGap Unsigned32,
acdSaServiceMonoCounterChliTime Unsigned32,
acdSaServiceMonoCounterChliRatio Unsigned32
}
acdSaServiceMonoCounterValidFlag OBJECT-TYPE
SYNTAX AcdSaValidFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the service counter during this sampling
interval."
::= { acdSaServiceMonoCounterEntry 1 }
acdSaServiceMonoCounterUpTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uptime is a measure of the time a service has been up during this
sampling interval."
::= { acdSaServiceMonoCounterEntry 2 }
acdSaServiceMonoCounterUaTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UaTime is a measure of the time a service has been unavailable
during this sampling interval."
::= { acdSaServiceMonoCounterEntry 3 }
acdSaServiceMonoCounterMaintTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MaintTime is a measure of the time a service has been in maintenance
during this sampling interval."
::= { acdSaServiceMonoCounterEntry 4 }
acdSaServiceMonoCounterAvailRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the availability ratio in millionth of a percent
(1,000,000 is 1%)."
::= { acdSaServiceMonoCounterEntry 5 }
acdSaServiceMonoCounterGaps OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gap shall be the number of time the state change from available
to unavailable."
::= { acdSaServiceMonoCounterEntry 6 }
acdSaServiceMonoCounterLargestGap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The largest gap shall be the largest number of consecutive unavailable
second."
::= { acdSaServiceMonoCounterEntry 7 }
acdSaServiceMonoCounterChliTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter which increments for every high loss interval.
It is only reset to zero when one of the following conditions occur:
1) device reboot 2) explicit counter reset."
::= { acdSaServiceMonoCounterEntry 8 }
acdSaServiceMonoCounterChliRatio OBJECT-TYPE
SYNTAX Unsigned32 (0..100000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ratio of high loss intervals divided by the uptime minus the sum of maintenance time and unavailable time,
expressed in millionth of a percent (1,000,000 is 1%)."
::= { acdSaServiceMonoCounterEntry 9 }
---------------------------------------------------------------------------
-- The Metric counters table
-- This table contains all metrics history counters.
---------------------------------------------------------------------------
acdSaMetricCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaMetricCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaCounter 4 }
acdSaMetricCounterEntry OBJECT-TYPE
SYNTAX AcdSaMetricCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all counters for a Metric."
INDEX { acdSaServiceIndex,
acdSaMetricIndex }
::= { acdSaMetricCounterTable 1 }
AcdSaMetricCounterEntry ::= SEQUENCE {
acdSaMetricCounterValidFlag AcdSaValidFlag,
acdSaMetricCounterUaTime Unsigned32,
acdSaMetricCounterChliTime Unsigned32
}
acdSaMetricCounterValidFlag OBJECT-TYPE
SYNTAX AcdSaValidFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the metric counter during this sampling
interval."
::= { acdSaMetricCounterEntry 1 }
acdSaMetricCounterUaTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UaTime is a measure of the time a metric has been unavailable
during this sampling interval."
::= { acdSaMetricCounterEntry 2 }
acdSaMetricCounterChliTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur:
1) device reboot 2) explicit counter reset."
::= { acdSaMetricCounterEntry 3 }
---------------------------------------------------------------------------
-- The Metric History counters table
-- This table contains all metrics history counters.
---------------------------------------------------------------------------
acdSaMetricHistCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaMetricHistCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaCounter 5 }
acdSaMetricHistCounterEntry OBJECT-TYPE
SYNTAX AcdSaMetricHistCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all counters for a Metric."
INDEX { acdSaMetricHistCounterID,
acdSaMetricHistCounterPeriodIndex }
::= { acdSaMetricHistCounterTable 1 }
AcdSaMetricHistCounterEntry ::= SEQUENCE {
acdSaMetricHistCounterID Unsigned32,
acdSaMetricHistCounterPeriodIndex Unsigned32,
acdSaMetricHistCounterIntervalEnd DateAndTime,
acdSaMetricHistCounterValidFlag AcdSaValidFlag,
acdSaMetricHistCounterUaTime Unsigned32,
acdSaMetricHistCounterChliTime Unsigned32
}
acdSaMetricHistCounterID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each Metric instance. This value follows the
ordering of the service table."
::= { acdSaMetricHistCounterEntry 1 }
acdSaMetricHistCounterPeriodIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies the particular sample this entry
represents among all samples associated with the same service
instance. This index starts at 1 and increases by one as each new
period."
::= { acdSaMetricHistCounterEntry 2 }
acdSaMetricHistCounterIntervalEnd OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time of the end of this entry."
::= { acdSaMetricHistCounterEntry 3 }
acdSaMetricHistCounterValidFlag OBJECT-TYPE
SYNTAX AcdSaValidFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the metric counter during this sampling
interval."
::= { acdSaMetricHistCounterEntry 4 }
acdSaMetricHistCounterUaTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UaTime is a measure of the time a metric has been unavailable
during this sampling interval."
::= { acdSaMetricHistCounterEntry 5 }
acdSaMetricHistCounterChliTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter which increments for every High Loss Interval. It is only reset to zero when one of the following conditions occur:
1) device reboot 2) explicit counter reset."
::= { acdSaMetricHistCounterEntry 6 }
---------------------------------------------------------------------------
-- The Metric counters table
-- This table contains all metrics history counters.
---------------------------------------------------------------------------
acdSaMetricMonoCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaMetricMonoCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaCounter 6 }
acdSaMetricMonoCounterEntry OBJECT-TYPE
SYNTAX AcdSaMetricMonoCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all counters for a Metric."
INDEX { acdSaServiceIndex,
acdSaMetricIndex }
::= { acdSaMetricMonoCounterTable 1 }
AcdSaMetricMonoCounterEntry ::= SEQUENCE {
acdSaMetricMonoCounterValidFlag AcdSaValidFlag,
acdSaMetricMonoCounterUaTime Unsigned32,
acdSaMetricMonoCounterChliTime Unsigned32
}
acdSaMetricMonoCounterValidFlag OBJECT-TYPE
SYNTAX AcdSaValidFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the validity of the metric counter during this sampling
interval."
::= { acdSaMetricMonoCounterEntry 1 }
acdSaMetricMonoCounterUaTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UaTime is a measure of the time a metric has been unavailable
during this sampling interval."
::= { acdSaMetricMonoCounterEntry 2 }
acdSaMetricMonoCounterChliTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter which increments for every high loss interval. It is only reset to zero when one of the following conditions occur:
1) device reboot 2) explicit counter reset."
::= { acdSaMetricMonoCounterEntry 3 }
---------------------------------------------------------------------------
-- The Service status table
-- This table contains all Service entry status.
---------------------------------------------------------------------------
acdSaServiceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdSaServiceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all instance of service availability of this unit."
::= { acdSaStatus 1 }
acdSaServiceStatusEntry OBJECT-TYPE
SYNTAX AcdSaServiceStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry consisting of all status for a Service."
INDEX { acdSaServiceStatusID }
::= { acdSaServiceStatusTable 1 }
AcdSaServiceStatusEntry ::= SEQUENCE {
acdSaServiceStatusID Unsigned32,
acdSaServiceStatusName DisplayString,
acdSaServiceStatusAdminState AcdSaAdminStateFlag,
acdSaServiceStatusOperState AcdSaOperStateFlag,
acdSaServiceStatusNbrMetrics Gauge32
}
acdSaServiceStatusID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique value for each service instance."
::= { acdSaServiceStatusEntry 1 }
acdSaServiceStatusName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique name used to identify the Service."
::= { acdSaServiceStatusEntry 2 }
acdSaServiceStatusAdminState OBJECT-TYPE
SYNTAX AcdSaAdminStateFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Administrative state is one of is(1) or oos(2)."
DEFVAL { 2 }
::= { acdSaServiceStatusEntry 3 }
acdSaServiceStatusOperState OBJECT-TYPE
SYNTAX AcdSaOperStateFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state is one of is(1), oos(2) or oosAu (3)."
DEFVAL { 2 }
::= { acdSaServiceStatusEntry 4 }
acdSaServiceStatusNbrMetrics OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of metrics associated with this Service instance."
DEFVAL { 0 }
::= { acdSaServiceStatusEntry 5 }
---------------------------------------------------------------------------
-- ACD-SA-MIB Module - Conformance Information
---------------------------------------------------------------------------
acdSaCompliances OBJECT IDENTIFIER ::= { acdSaConformance 1 }
acdSaGroups OBJECT IDENTIFIER ::= { acdSaConformance 2 }
---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------
acdSaServiceConfigGroup OBJECT-GROUP
OBJECTS {
acdSaServiceConfigRowStatus,
acdSaServiceConfigName,
acdSaServiceConfigAdminState,
acdSaServiceConfigReportingPeriod,
acdSaServiceConfigUaWindowSize,
acdSaServiceConfigHliWindowSize,
acdSaServiceConfigTimeInterval
}
STATUS current
DESCRIPTION
"Objects for the Service configuration Group."
::= { acdSaGroups 1 }
acdSaMetricConfigGroup OBJECT-GROUP
OBJECTS {
acdSaMetricConfigRowStatus,
acdSaMetricConfigName,
acdSaMetricConfigSrcName,
acdSaMetricConfigType,
acdSaMetricConfigThreshold
}
STATUS current
DESCRIPTION
"Objects for the Metric configuration Group."
::= { acdSaGroups 2 }
acdSaServiceCounterGroup OBJECT-GROUP
OBJECTS {
acdSaServiceCounterPeriodIndex,
acdSaServiceCounterValidFlag,
acdSaServiceCounterUpTime,
acdSaServiceCounterUaTime,
acdSaServiceCounterMaintTime,
acdSaServiceCounterAvailRatio,
acdSaServiceCounterGaps,
acdSaServiceCounterLargestGap,
acdSaServiceCounterChliTime,
acdSaServiceCounterChliRatio
}
STATUS current
DESCRIPTION
"Objects for the Service Counter Group."
::= { acdSaGroups 3 }
acdSaServiceHistCounterGroup OBJECT-GROUP
OBJECTS {
acdSaServiceHistCounterIntervalEnd,
acdSaServiceHistCounterValidFlag,
acdSaServiceHistCounterUpTime,
acdSaServiceHistCounterUaTime,
acdSaServiceHistCounterMaintTime,
acdSaServiceHistCounterAvailRatio,
acdSaServiceHistCounterGaps,
acdSaServiceHistCounterLargestGap,
acdSaServiceHistCounterChliTime,
acdSaServiceHistCounterChliRatio
}
STATUS current
DESCRIPTION
"Objects for the Service History Counter Group."
::= { acdSaGroups 4 }
acdSaServiceMonoCounterGroup OBJECT-GROUP
OBJECTS {
acdSaServiceMonoCounterValidFlag,
acdSaServiceMonoCounterUpTime,
acdSaServiceMonoCounterUaTime,
acdSaServiceMonoCounterMaintTime,
acdSaServiceMonoCounterAvailRatio,
acdSaServiceMonoCounterGaps,
acdSaServiceMonoCounterLargestGap,
acdSaServiceMonoCounterChliTime,
acdSaServiceMonoCounterChliRatio
}
STATUS current
DESCRIPTION
"Objects for the Service Monotonic Counter Group."
::= { acdSaGroups 5 }
acdSaMetricCounterGroup OBJECT-GROUP
OBJECTS {
acdSaMetricCounterValidFlag,
acdSaMetricCounterUaTime,
acdSaMetricCounterChliTime
}
STATUS current
DESCRIPTION
"Objects for the Metric Counter Group."
::= { acdSaGroups 6 }
acdSaMetricHistCounterGroup OBJECT-GROUP
OBJECTS {
acdSaMetricHistCounterIntervalEnd,
acdSaMetricHistCounterValidFlag,
acdSaMetricHistCounterUaTime,
acdSaMetricHistCounterChliTime
}
STATUS current
DESCRIPTION
"Objects for the Metric History Counter Group."
::= { acdSaGroups 7 }
acdSaMetricMonoCounterGroup OBJECT-GROUP
OBJECTS {
acdSaMetricMonoCounterValidFlag,
acdSaMetricMonoCounterUaTime,
acdSaMetricMonoCounterChliTime
}
STATUS current
DESCRIPTION
"Objects for the Metric History Counter Group."
::= { acdSaGroups 8 }
acdSaServiceStatusGroup OBJECT-GROUP
OBJECTS {
acdSaServiceStatusName,
acdSaServiceStatusAdminState,
acdSaServiceStatusOperState,
acdSaServiceStatusNbrMetrics
}
STATUS current
DESCRIPTION
"Objects for the Service Status Group."
::= { acdSaGroups 9 }
acdSaCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the ACD-SA-MIB module."
MODULE
MANDATORY-GROUPS {
acdSaServiceConfigGroup,
acdSaMetricConfigGroup,
acdSaServiceCounterGroup,
acdSaServiceHistCounterGroup,
acdSaServiceMonoCounterGroup,
acdSaMetricCounterGroup,
acdSaMetricHistCounterGroup,
acdSaMetricMonoCounterGroup,
acdSaServiceStatusGroup
}
OBJECT acdSaServiceConfigRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
OBJECT acdSaMetricConfigRowStatus
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION "Support for createAndWait is not required."
::= { acdSaCompliances 1 }
END
Reference in New Issue Copy Permalink