mibs/MIBS/adtran/ADTRAN-AOS-3G

643 lines
23 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
ADTRAN-AOS-3G DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, Integer32, IpAddress, OBJECT-TYPE, OBJECT-IDENTITY,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndex, ifIndex
FROM IF-MIB
adIdentity
FROM ADTRAN-MIB
adGenAOSConformance, adGenAOSWan
FROM ADTRAN-AOS;
adGenAOS3GMib MODULE-IDENTITY
LAST-UPDATED "201001050000Z"
ORGANIZATION "ADTRAN, Inc."
CONTACT-INFO
"Technical Support Dept.
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726-8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"A MIB module for monitoring 3G module values."
REVISION "201001050000Z" -- Jan 5, 2010 / YYYYMMDDHHMMZ
DESCRIPTION
"Added TEXTUAL-CONVENTION EcioValue and object identifier
adGenAOS3GECIOIntegerValue.
Changes by Reba Holland."
REVISION "201001140000Z" -- Jan 14, 2010 / YYYYMMDDHHMMZ
DESCRIPTION
"Changed syntax of object identifier
adGenAOS3GECIOIntegerValue from EcioValue to Integer32.
Removed TEXTUAL CONVENTION EcioValue.
Changes by Reba Holland."
::= { adIdentity 10000 53 6 2 }
-- OBJECT IDENTIFIER
adGenAOS3G OBJECT IDENTIFIER ::= { adGenAOSWan 2 }
--============================================================================
adGenAOS3GTraps OBJECT-IDENTITY
STATUS current
DESCRIPTION "The table contains traps/alarms caused by changes in
configuration values and when statistical data reach
certain thresholds."
::= { adGenAOS3G 0 }
-- 3G Profile Details Entry
adGenAOS3GTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOS3GEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains 3G cellular statistical data for the cellular
interface."
::= { adGenAOS3G 1 }
adGenAOS3GEntry OBJECT-TYPE
SYNTAX AdGenAOS3GEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry into the 3G table."
INDEX { ifIndex }
::= { adGenAOS3GTable 1 }
AdGenAOS3GEntry ::=
SEQUENCE {
adGenAOS3GNetworkAccessID DisplayString,
adGenAOS3GHASS BITS,
adGenAOS3GHASPI Unsigned32,
adGenAOS3GAAASS BITS,
adGenAOS3GAAASPI Unsigned32,
adGenAOS3GReverseTunneling BITS,
adGenAOS3GHomeAddress IpAddress,
adGenAOS3GPrimaryHomeAddress IpAddress,
adGenAOS3GSecHomeAddress IpAddress,
adGenAOS3GRSSI Integer32,
adGenAOS3GECIO DisplayString,
adGenAOS3GPnOffset Integer32,
adGenAOS3GServiceType DisplayString,
adGenAOS3GServiceTypePreference INTEGER,
adGenAOS3GConnectionState DisplayString,
adGenAOS3GECIOIntegerValue Integer32
}
-- CID_CELLULAR_NETWORK_IDENTIFIER
adGenAOS3GNetworkAccessID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Network Access ID is the User ID submitted by the 3G
Modem during Mobile IP authentication. For more information,
refer to RFC 4282."
::= { adGenAOS3GEntry 1 }
-- CID_CELLULAR_HA_SS
adGenAOS3GHASS OBJECT-TYPE
SYNTAX BITS { unset(0), set(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID displays whether the shared secret for the home
agent has been set for Mobile IP authentication."
::= { adGenAOS3GEntry 2 }
-- CID_CELLULAR_HA_SPI
adGenAOS3GHASPI OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Home Agent Security Parameter Index uniquely identifies a
security association for the home agent for use during Mobile
IP authentication."
::= { adGenAOS3GEntry 3 }
-- CID_CELLULAR_AAA_SS
adGenAOS3GAAASS OBJECT-TYPE
SYNTAX BITS { unset(0), set(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID displays whether the shared secret for AAA
has been set for Mobile IP authentication."
::= { adGenAOS3GEntry 4 }
-- CID_CELLULAR_AAA_SPI
adGenAOS3GAAASPI OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AAA Security Parameter Index uniquely identifies a
security association for AAA for use during Mobile IP
authentication."
::= { adGenAOS3GEntry 5 }
-- CID_CELLULAR_REVERSE_TUNNELING
adGenAOS3GReverseTunneling OBJECT-TYPE
SYNTAX BITS { unset(0), set(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID describes if a tunnel is setup from the
3G module's care of address to the home agent. A care of
address is a temporary IP address for a mobile device."
::= { adGenAOS3GEntry 6 }
-- CID_CELLULAR_HOME_ADDRESS
adGenAOS3GHomeAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The permanent home IP address for the 3G
module in the cellular network."
::= { adGenAOS3GEntry 7 }
-- CID_CELLULAR_PRIMARY_HOME_ADDRESS
adGenAOS3GPrimaryHomeAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary IP address of the 3G module's home agent."
::= { adGenAOS3GEntry 8 }
-- CID_CELLULAR_SECONDARY_HOME_ADDRESS
adGenAOS3GSecHomeAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary IP address of the 3G module's home agent."
::= { adGenAOS3GEntry 9 }
-- CID_CELLULAR_RSSI
adGenAOS3GRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Signal Strength Indicator for the cellular
connection. This value is a measurement of signal strength."
::= { adGenAOS3GEntry 10 }
-- CID_CELLULAR_ECIO
adGenAOS3GECIO OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ec/Io for the cellular connection. This is the ratio of
received pilot energy to the total received energy. The value
is similar to signal-to-noise ratio."
::= { adGenAOS3GEntry 11 }
-- CID_CELLULAR_BASE_STATION_LOCATION
adGenAOS3GPnOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Pn Offset for the cellular connection. Base stations
assigned to a particular frequency carrier operate at the same
center frequency. The PN offset is used to distinguish base
stations from one another."
::= { adGenAOS3GEntry 12 }
-- CID_CELLULAR_SERVICE_TYPE
adGenAOS3GServiceType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Cellular Service Type for
the cellular connection."
::= { adGenAOS3GEntry 13 }
-- CID_CELLULAR_CDMA_SERVICE_TYPE
adGenAOS3GServiceTypePreference OBJECT-TYPE
SYNTAX INTEGER { modeAUTO(4), mode1xRTT(9), mode1xEVDO(10) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current Cellular Service Type Preference for the cellular
connection. Cellular Service Type can be forced to 1xRTT mode
or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode
which chooses the best available signal."
::= { adGenAOS3GEntry 14 }
-- CID_CELLULAR_CONNECT_STATE
adGenAOS3GConnectionState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Connection State for the cellular connection."
::= { adGenAOS3GEntry 15 }
-- CID_CELLULAR_ECIO
adGenAOS3GECIOIntegerValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ec/Io for the cellular connection displayed in integer
form. This is the ratio of received pilot energy to the total
received energy. The value is similar to signal-to-noise ratio.
EC/IO values typically are represented as a value with a
decimal place. In this representation the value will be
scaled by 10. Hence a value of 1.5 will be represented as 15."
::= { adGenAOS3GEntry 16 }
--============================================================================
-- 3G Hardware Profile Detail Entries
--============================================================================
adGenAOS3GHardwareDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOS3GHardwareDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains profile information
for the 3G cellular interface."
::= { adGenAOS3G 2 }
adGenAOS3GHardwareDataEntry OBJECT-TYPE
SYNTAX AdGenAOS3GHardwareDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry into the 3G hardware data table."
INDEX { ifIndex }
::= { adGenAOS3GHardwareDataTable 1 }
AdGenAOS3GHardwareDataEntry ::=
SEQUENCE {
adGenAOS3GSystemID Unsigned32,
adGenAOS3GNetworkID DisplayString,
adGenAOS3GPrefferedRoamList Unsigned32,
adGenAOS3GMobileDirNumber DisplayString,
adGenAOS3GESN DisplayString,
adGenAOS3GMobileStationID DisplayString,
adGenAOS3GHardwareVersion DisplayString,
adGenAOS3GFirmwareVersion DisplayString
}
-- CID_CELLULAR_SYSTEM_ID
adGenAOS3GSystemID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The System Identification number is the identifier
for a cellular network in a certain area."
::= { adGenAOS3GHardwareDataEntry 1 }
-- CID_CELLULAR_NETWORK_ID
adGenAOS3GNetworkID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Network Identification number identifies a subset
of a particular SID corresponding to different networks."
::= { adGenAOS3GHardwareDataEntry 2 }
-- CID_CELLULAR_PREFFERED_ROAMING_LIST
adGenAOS3GPrefferedRoamList OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PRL is a database of cell towers that the cellular modem
can roam on. This OID specifies the current version of
that database that is programmed onto the cellular modem."
::= { adGenAOS3GHardwareDataEntry 3 }
-- CID_CELLULAR_MOBILE_DIRECTORY_NUMBER
adGenAOS3GMobileDirNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MDN is the 10 digit phone number assigned to
the 3G module."
::= { adGenAOS3GHardwareDataEntry 4 }
-- CID_CELLULAR_ELECTRONIC_SERIAL_NUMBER
adGenAOS3GESN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Electronic Serial Number is is a unique
number that identifies the 3G module."
::= { adGenAOS3GHardwareDataEntry 5 }
-- CID_CID_CELLULAR_MOBILE_STATION_ID
adGenAOS3GMobileStationID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MSID is a 10 digit number that identifies
the 3G module in the network."
::= { adGenAOS3GHardwareDataEntry 6 }
-- CID_CELLULAR_HARDWARE_VERSION
adGenAOS3GHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware version of the 3G modem."
::= { adGenAOS3GHardwareDataEntry 7 }
-- CID_CELLULAR_FIRMWARE_VERSION
adGenAOS3GFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware version of the 3G modem."
::= { adGenAOS3GHardwareDataEntry 8 }
--============================================================================
-- 3G Threshold Entries
--============================================================================
adGenAOS3GThresholdDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdGenAOS3GThresholdDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains settings regarding whether the trap is enabled
and threshold values for certain traps."
::= { adGenAOS3G 3 }
adGenAOS3GThresholdDataEntry OBJECT-TYPE
SYNTAX AdGenAOS3GThresholdDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is an entry into the 3G threshold data table."
INDEX { ifIndex }
::= { adGenAOS3GThresholdDataTable 1 }
AdGenAOS3GThresholdDataEntry ::=
SEQUENCE {
adGenAOS3GEnableTraps INTEGER,
adGenAOS3GRSSIThreshold Integer32,
adGenAOS3GECIOThreshold Integer32
}
-- CID_THRESHOLD_CROSSED_TRAP_ENA
adGenAOS3GEnableTraps OBJECT-TYPE
SYNTAX INTEGER { enabled(1),disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID indicates whether traps
are enabled for the interface."
::= { adGenAOS3GThresholdDataEntry 1 }
-- CID_CELLULAR_RSSI_THRESHOLD
adGenAOS3GRSSIThreshold OBJECT-TYPE
SYNTAX Integer32 (-200..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a value from (-200..200) that sets the threshold for
an RSSI trap to occur. When the RSSI is below this value, it
will cause an RSSI alarm trap. When the RSSI rises above this
value, it will cause an RSSI cleared trap."
::= { adGenAOS3GThresholdDataEntry 2 }
-- CID_CELLULAR_ECIO_THRESHOLD
adGenAOS3GECIOThreshold OBJECT-TYPE
SYNTAX Integer32 (-200..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a value from (-200..200) that sets the threshold for
an ECIO trap to occur. When the ECIO is below this value, it
will cause an ECIO alarm trap. When the ECIO rises above this
value, it will cause an ECIO cleared trap."
::= { adGenAOS3GThresholdDataEntry 3 }
--============================================================================
-- Traps for 3G Interface
--============================================================================
rssiDataRangeAlarm NOTIFICATION-TYPE
OBJECTS { ifIndex, adGenAOS3GRSSI }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting in
an agent role, has detected that the RSSI data value object for
the 3G cellular interface has exceeded the range specified by the
user."
::= { adGenAOS3GTraps 1 }
ecioDataRangeAlarm NOTIFICATION-TYPE
OBJECTS { ifIndex, adGenAOS3GECIO }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting in
an agent role, has detected that the ECIO data value object for
the 3G cellular interface has exceeded the range specified by the
user."
::= { adGenAOS3GTraps 2 }
rssiDataRangeClear NOTIFICATION-TYPE
OBJECTS { ifIndex, adGenAOS3GRSSI }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting in
an agent role, has detected that the RSSI data value object for
the 3G cellular interface has returned to the range specified by
the user."
::= { adGenAOS3GTraps 3 }
ecioDataRangeClear NOTIFICATION-TYPE
OBJECTS { ifIndex, adGenAOS3GECIO }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting in
an agent role, has detected that the ECIO data value object for
the 3G cellular interface has returned to the range specified by
the user."
::= { adGenAOS3GTraps 4 }
configValueSet NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting in
an agent role, has detected that a data value object for the 3G
cellular interface from the 3G Hardware Table has been modified
from the previous state."
::= { adGenAOS3GTraps 5 }
modemResetAlarm NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting in
an agent role, has detected that the 3G modem has been reset."
::= { adGenAOS3GTraps 6 }
serviceTypeChangeAlarm NOTIFICATION-TYPE
OBJECTS { ifIndex, adGenAOS3GServiceType }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting
in an agent role, has detected that the service type for the 3G
cellular interface has changed."
::= { adGenAOS3GTraps 7}
connectionStateDownAlarm NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"This trap signifies that the SNMP entity, acting
in an agent role, has detected that the connection status of the
modem has gone down from either DORMANT or a CONNECTED state."
::= { adGenAOS3GTraps 8}
--
-- MIB Compliance statements.
--
adGenAOS3GConformance OBJECT IDENTIFIER ::= { adGenAOSConformance 9 }
adGenAOS3GGroup OBJECT IDENTIFIER ::= { adGenAOS3GConformance 1 }
adGenAOS3GCompliances OBJECT IDENTIFIER ::= { adGenAOS3GConformance 2 }
-- Full compliance statement
adGenAOS3GFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
version 2 of the adGenAOS3G MIB."
MODULE -- this module
MANDATORY-GROUPS { adGenAOS3GTableGroup }
GROUP adGenAOS3GHardwareDataGroup
DESCRIPTION
"This optional group is used to retrieve hardware profile
statistics for a 3G interface module. Availability of data is
dependent upon configuration and interface activity."
GROUP adGenAOS3GThresholdDataGroup
DESCRIPTION
"This optional group is used to retrieve threshold data for
the 3g interface. Availability of data is dependent upon
configuration and interface activity."
GROUP adGenAOS3GTrapGroup
DESCRIPTION
"This optional group defines the asynchronous
notifications generated by the 3G interface."
::= { adGenAOS3GCompliances 1 }
-- units of conformance
adGenAOS3GTableGroup OBJECT-GROUP
OBJECTS {
adGenAOS3GNetworkAccessID,
adGenAOS3GHASS,
adGenAOS3GHASPI,
adGenAOS3GAAASS,
adGenAOS3GAAASPI,
adGenAOS3GReverseTunneling,
adGenAOS3GHomeAddress,
adGenAOS3GPrimaryHomeAddress,
adGenAOS3GSecHomeAddress,
adGenAOS3GRSSI,
adGenAOS3GECIO,
adGenAOS3GPnOffset,
adGenAOS3GServiceType,
adGenAOS3GServiceTypePreference,
adGenAOS3GConnectionState,
adGenAOS3GECIOIntegerValue
}
STATUS current
DESCRIPTION
"This group contains 3G cellular statistical data for profile
information."
::= { adGenAOS3GGroup 1 }
adGenAOS3GHardwareDataGroup OBJECT-GROUP
OBJECTS {
adGenAOS3GSystemID,
adGenAOS3GNetworkID,
adGenAOS3GPrefferedRoamList,
adGenAOS3GMobileDirNumber,
adGenAOS3GESN,
adGenAOS3GMobileStationID,
adGenAOS3GHardwareVersion,
adGenAOS3GFirmwareVersion
}
STATUS current
DESCRIPTION
"This group contains 3G cellular statistical data for hardware
information."
::= { adGenAOS3GGroup 2 }
adGenAOS3GThresholdDataGroup OBJECT-GROUP
OBJECTS {
adGenAOS3GEnableTraps,
adGenAOS3GRSSIThreshold,
adGenAOS3GECIOThreshold
}
STATUS current
DESCRIPTION
"This group contains threshold data for enabling 3G interface
thresholds."
::= { adGenAOS3GGroup 3 }
adGenAOS3GTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rssiDataRangeAlarm,
ecioDataRangeAlarm,
rssiDataRangeClear,
ecioDataRangeClear,
configValueSet,
modemResetAlarm,
serviceTypeChangeAlarm,
connectionStateDownAlarm
}
STATUS current
DESCRIPTION
"Traps which may be used to enhance event driven
management of the interface."
::= { adGenAOS3GGroup 4 }
END