david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/adva/ADVA-FSPR7-MODULE-ENCRYPTION-MIB

1831 lines
63 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ***************************************************************************
-- ADVA-FSPR7-MODULE-ENCRYPTION-MIB.txt
--
-- ADVA AG Optical Networking Module Encryption MIB File
--
-- Copyright 2011 ADVA AG Optical Networking.
--
-- All rights reserved.
-- ***************************************************************************
-- MIB definitions required for Module Encryption management.
ADVA-FSPR7-MODULE-ENCRYPTION-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION,
DateAndTime,
TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
fspR7,
EntityIndex,
entityIndex
FROM ADVA-MIB
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName,
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
FROM ADVA-FSPR7-MIB
FspR7RequestErrorType,
FspR7RequestErrorTypeAes,
FspR7RlsAction,
FspR7RlsActionCaps,
FspR7SnmpHexString,
FspR7Unsigned32Caps
FROM ADVA-FSPR7-TC-MIB;
moduleEncryptionMIB MODULE-IDENTITY
LAST-UPDATED "201805280000Z"
ORGANIZATION "ADVA Optical Networking"
CONTACT-INFO "EMEA Support
Phone : +49 89 89 0665 848
Fax : +49 89 89 0665 22848
Email : support@advaoptical.com
North American Support
Phone : 886 442 ADVA (2382) (toll-free within the US, Canada and Mexico)
Fax : + 1 806 741 8529 (elsewhere)
Email : support-usa@advaoptical.com
Asia Pacific Support
Phone : + 1 866 442 2382 (other toll-free numbers available in some countries)
Email : support-asia@advaoptical.com"
DESCRIPTION "This is a MIB definition for ADVA AG Optical Networking module encryption management."
REVISION "201805280000Z"
DESCRIPTION "FSP3000 F7 Release 17.2.2 MIB."
REVISION "201804170000Z"
DESCRIPTION "FSP3000 F7 Release 17.2.1 MIB."
REVISION "201803150000Z"
DESCRIPTION "FSP3000 F7 Release 17.1.2 MIB."
REVISION "201712070000Z"
DESCRIPTION "FSP3000 F7 Release 17.1.1 MIB."
REVISION "201604010000Z"
DESCRIPTION "FSP3000 F7 Release 16.1.1 MIB."
REVISION "201512100000Z"
DESCRIPTION "FSP3000 F7 Release 15.2.1 MIB."
REVISION "201308200000Z"
DESCRIPTION "FSP3000 F7 Release 12.1.1 MIB."
REVISION "201102160000Z"
DESCRIPTION "FSP3000 F7 Release 10.3.1 MIB."
::= { fspR7 5 }
encryptionMIB
OBJECT IDENTIFIER ::= { moduleEncryptionMIB 1 }
moduleEncryptionObjects
OBJECT IDENTIFIER ::= { encryptionMIB 2 }
portEncryptionObjects
OBJECT IDENTIFIER ::= { encryptionMIB 3 }
encryptionPerformanceMonitoring
OBJECT IDENTIFIER ::= { encryptionMIB 4 }
encryptionDiagnostics
OBJECT IDENTIFIER ::= { encryptionMIB 5 }
CryptoFspR7CryBoot ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Encryption Restart"
SYNTAX INTEGER
{
undefined(0),
rls(1),
warmStart(2),
warmStartFwp(3),
coldStart(4),
coldStartFwp(5)
}
CryptoFspR7CryBootCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Encryption Restart"
SYNTAX BITS
{
capUndefined(0),
capRls(1),
capWarmStart(2),
capWarmStartFwp(3),
capColdStart(4),
capColdStartFwp(5)
}
CryptoFspR7EnableDisable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enable/Disable variable."
SYNTAX INTEGER
{
undefined(0),
enable(1),
disable(2)
}
CryptoFspR7EnableDisableCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enable/Disable variable."
SYNTAX BITS
{
capUndefined(0),
capEnable(1),
capDisable(2)
}
CryptoFspR7EncryptionCommunication ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Embedded Communication Channel used to support Encryption"
SYNTAX INTEGER
{
undefined(0),
tcm1(1),
tcm2(2),
tcm3(3),
tcm4(4),
tcm5(5),
tcm6(6),
gcc0(7),
gcc1(8),
gcc2(9),
gcc1gcc2(10),
res1(11), --ODU OH row 4 column 9 - 12
res2(12), --ODU OH row 4 column 11 - 14
tcm1tcm2(13),
tcm2tcm3(14),
tcm3tcm4(15),
tcm4tcm5(16),
tcm5tcm6(17),
none(18)
}
CryptoFspR7EncryptionCommunicationCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Embedded Communication Channel used to support Encryption"
SYNTAX BITS
{
capUndefined(0),
capTcm1(1),
capTcm2(2),
capTcm3(3),
capTcm4(4),
capTcm5(5),
capTcm6(6),
capGcc0(7),
capGcc1(8),
capGcc2(9),
capGcc1gcc2(10),
capRes1(11),
capRes2(12),
capTcm1tcm2(13),
capTcm2tcm3(14),
capTcm3tcm4(15),
capTcm4tcm5(16),
capTcm5tcm6(17),
capNone(18)
}
CryptoFspR7EncryptionReset ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for module 'reset to factory' operation. The rls(1) value
means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the
'reset to factory' operation immediately."
SYNTAX INTEGER
{
undefined(0),
rls(1),
rtf(2) --Manual reset, All passwords are cleared
}
CryptoFspR7EncryptionResetCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for module 'reset to factory' operation. The rls(1) value
means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the
'reset to factory' operation immediately."
SYNTAX BITS
{
capUndefined(0),
capRls(1),
capRtf(2)
}
CryptoFspR7EncryptionSwitch ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for disabling the encrypted mode."
SYNTAX INTEGER
{
undefined(0),
rls(1),
oprCryptoOff(2)
}
CryptoFspR7EncryptionSwitchCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for disabling the encrypted mode."
SYNTAX BITS
{
capUndefined(0),
capRls(1),
capOprCryptoOff(2)
}
CryptoFspR7ForceKeyExchange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for forcing the key exchange process between
encryption-capable modules. Successful process startup does not mean that
whole operation succeeded."
SYNTAX INTEGER
{
undefined(0),
rls(1),
oprKeyExchg(2)
}
CryptoFspR7ForceKeyExchangeCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for forcing the key exchange process between
encryption-capable modules. Successful process startup does not mean that
whole operation succeeded."
SYNTAX BITS
{
capUndefined(0),
capRls(1),
capOprKeyExchg(2)
}
CryptoFspR7KeyExchangeForcedClear ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for reseting the key exchange failure status."
SYNTAX INTEGER
{
undefined(0),
rls(1),
reset(2)
}
CryptoFspR7KeyExchangeForcedClearCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention for reseting the key exchange failure status."
SYNTAX BITS
{
capUndefined(0),
capRls(1),
capReset(2)
}
CryptoFspR7SelfTestOperation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Encryption selftest"
SYNTAX INTEGER
{
undefined(0),
rls(1),
oprSelfTest(2)
}
CryptoFspR7SelfTestOperationCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Encryption selftest"
SYNTAX BITS
{
capUndefined(0),
capRls(1),
capOprSelfTest(2)
}
CryptoFspR7SessionKeyLifetime ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention presenting available key lifetime periods for an encrypted sessions."
SYNTAX INTEGER
{
undefined(0),
lifetime30min(1),
lifetime1h(2),
lifetime2h(3),
lifetime3h(4),
lifetime6h(5),
lifetime12h(6),
lifetime1d(7),
lifetime2d(8),
lifetime3d(9),
lifetime1w(10),
lifetime2w(11),
lifetime3w(12),
lifetimeMax(13),
lifetime330min(14),
lifetime11h(15)
}
CryptoFspR7SessionKeyLifetimeCaps ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Textual-Convention presenting available key lifetime periods for an encrypted sessions."
SYNTAX BITS
{
capUndefined(0),
capLifetime30min(1),
capLifetime1h(2),
capLifetime2h(3),
capLifetime3h(4),
capLifetime6h(5),
capLifetime12h(6),
capLifetime1d(7),
capLifetime2d(8),
capLifetime3d(9),
capLifetime1w(10),
capLifetime2w(11),
capLifetime3w(12),
capLifetimeMax(13),
capLifetime330min(14),
capLifetime11h(15)
}
-- mib-oriented scalars
cryptoOfficerPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object must be present in every set-request regarding encryption functionality."
::= { moduleEncryptionObjects 1 }
cryptoOfficerPasswordError OBJECT-TYPE
SYNTAX INTEGER
{
undefined(0),
passwdOk(1),
passwdInvalid(2),
passwdRejected(3),
passwdNotInit(4),
passwdTooSimple(5),
passwdValidationAborted(6),
none(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Last error related to set-request perform on that table."
::= { moduleEncryptionObjects 2 }
cryptoOfficerPasswordReqId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set-Request id for which cryptoOfficerPasswordError contains value."
::= { moduleEncryptionObjects 3 }
-- module encryption configuration
cryptoModuleConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoModuleConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related writeable parameters defined per module."
::= { moduleEncryptionObjects 10 }
cryptoModuleConfigEntry OBJECT-TYPE
SYNTAX CryptoModuleConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable module."
INDEX {
cryptoModuleConfigIndex
}
::= { cryptoModuleConfigTable 1 }
CryptoModuleConfigEntry ::= SEQUENCE
{ cryptoModuleConfigIndex EntityIndex,
cryptoModuleConfigCryptoOfficerPassword SnmpAdminString,
cryptoModuleConfigResetToFactory CryptoFspR7EncryptionReset,
cryptoModuleConfigFirmwareUpdateState CryptoFspR7EnableDisable,
cryptoModuleConfigFirmwareVersion SnmpAdminString,
cryptoModuleConfigSelfTestOperation CryptoFspR7SelfTestOperation }
cryptoModuleConfigIndex OBJECT-TYPE
SYNTAX EntityIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address of an encryption capable module."
::= { cryptoModuleConfigEntry 1 }
cryptoModuleConfigCryptoOfficerPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt
of this object will result with noSuchName error."
::= { cryptoModuleConfigEntry 2 }
cryptoModuleConfigResetToFactory OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Executes 'reset to factory' action."
::= { cryptoModuleConfigEntry 3 }
cryptoModuleConfigFirmwareUpdateState OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Determines if it is allowed for a module to perform firmware upgrade."
::= { cryptoModuleConfigEntry 4 }
cryptoModuleConfigFirmwareVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Firmware package version designated for an upgrade."
::= { cryptoModuleConfigEntry 5 }
cryptoModuleConfigSelfTestOperation OBJECT-TYPE
SYNTAX CryptoFspR7SelfTestOperation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Starts self-tests."
::= { cryptoModuleConfigEntry 6 }
-- module encryption monitoring
cryptoModuleStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoModuleStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related readable parameters defined per module."
::= { moduleEncryptionObjects 11 }
cryptoModuleStatusEntry OBJECT-TYPE
SYNTAX CryptoModuleStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable module."
INDEX {
cryptoModuleConfigIndex
}
::= { cryptoModuleStatusTable 1 }
CryptoModuleStatusEntry ::= SEQUENCE
{ cryptoModuleStatusIndex EntityIndex,
cryptoModuleStatusFailureLoginCount Unsigned32,
cryptoModuleStatusSuccessfulLoginDateAndTime DateAndTime,
cryptoModuleStatusUnsuccessfulLoginDateAndTime DateAndTime,
cryptoModuleStatusResetToFactoryCapability CryptoFspR7EnableDisable }
cryptoModuleStatusIndex OBJECT-TYPE
SYNTAX EntityIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address of an encryption capable module."
::= { cryptoModuleStatusEntry 1 }
cryptoModuleStatusFailureLoginCount OBJECT-TYPE
SYNTAX Unsigned32 (0..3 | 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of unsuccessful Crypto Officer log-in attempts."
::= { cryptoModuleStatusEntry 2 }
cryptoModuleStatusSuccessfulLoginDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a last successful Crypto Officer login."
::= { cryptoModuleStatusEntry 3 }
cryptoModuleStatusUnsuccessfulLoginDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a last unsuccessful Crypto Officer login."
::= { cryptoModuleStatusEntry 4 }
cryptoModuleStatusResetToFactoryCapability OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of possibility to perform Reset To Factory operation. If disable(2) then
cryptoModuleConfigResetToFactory cannot be used, otherwise operation will fail."
::= { cryptoModuleStatusEntry 5 }
-- five index scheme module encryption
cryptoModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related parameters defined per module."
::= { moduleEncryptionObjects 20 }
cryptoModuleEntry OBJECT-TYPE
SYNTAX CryptoModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable module."
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { cryptoModuleTable 1 }
CryptoModuleEntry ::= SEQUENCE
{ cryptoModuleCryptoOfficerPassword SnmpAdminString,
cryptoModuleResetToFactory CryptoFspR7EncryptionReset,
cryptoModuleFirmwareUpdateState CryptoFspR7EnableDisable,
cryptoModuleFirmwareVersion SnmpAdminString,
cryptoModuleSelfTestOperation CryptoFspR7SelfTestOperation,
cryptoModuleFailureLoginCount Unsigned32,
cryptoModuleSuccessfulLoginDateAndTime DateAndTime,
cryptoModuleUnsuccessfulLoginDateAndTime DateAndTime,
cryptoModuleFwpHash FspR7SnmpHexString,
cryptoModuleCryBoot CryptoFspR7CryBoot,
cryptoModuleStbyFwpHash FspR7SnmpHexString,
cryptoModuleSelfTestExecute Unsigned32,
cryptoModuleSelfTestResult Unsigned32 }
cryptoModuleCryptoOfficerPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt
of this object will result with noSuchName error."
::= { cryptoModuleEntry 1 }
cryptoModuleResetToFactory OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionReset
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Executes 'reset to factory' action."
::= { cryptoModuleEntry 2 }
cryptoModuleFirmwareUpdateState OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Determines if it is allowed for a module to perform firmware upgrade."
::= { cryptoModuleEntry 3 }
cryptoModuleFirmwareVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Firmware package version designated for an upgrade."
::= { cryptoModuleEntry 4 }
cryptoModuleSelfTestOperation OBJECT-TYPE
SYNTAX CryptoFspR7SelfTestOperation
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Starts self-tests."
::= { cryptoModuleEntry 5 }
cryptoModuleFailureLoginCount OBJECT-TYPE
SYNTAX Unsigned32 (0..3 | 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of unsuccessful Crypto Officer log-in attempts."
::= { cryptoModuleEntry 6 }
cryptoModuleSuccessfulLoginDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a last successful Crypto Officer login."
::= { cryptoModuleEntry 7 }
cryptoModuleUnsuccessfulLoginDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a last unsuccessful Crypto Officer login."
::= { cryptoModuleEntry 8 }
cryptoModuleFwpHash OBJECT-TYPE
SYNTAX FspR7SnmpHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hash value calculated for the firmware package using sha-256. Hash value is used to verify the firmware package has not been modified or corrupted."
::= { cryptoModuleEntry 9 }
cryptoModuleCryBoot OBJECT-TYPE
SYNTAX CryptoFspR7CryBoot
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Encryption Restart"
::= { cryptoModuleEntry 10 }
cryptoModuleStbyFwpHash OBJECT-TYPE
SYNTAX FspR7SnmpHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hash value calculated for the standby firmware package of the using sha-256. Hash value is used to verify the firmware package has not been modified or corrupted."
::= { cryptoModuleEntry 11 }
cryptoModuleSelfTestExecute OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Executed selftests"
::= { cryptoModuleEntry 12 }
cryptoModuleSelfTestResult OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Result of Selftest"
::= { cryptoModuleEntry 13 }
cryptoModuleCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoModuleCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related parameters defined per module."
::= { moduleEncryptionObjects 21 }
cryptoModuleCapEntry OBJECT-TYPE
SYNTAX CryptoModuleCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable module."
INDEX {
entityEqptShelfNo,
entityEqptSlotNo,
entityEqptPortNo,
entityEqptExtNo,
entityEqptClassName
}
::= { cryptoModuleCapTable 1 }
CryptoModuleCapEntry ::= SEQUENCE
{ cryptoModuleCapCryptoOfficerPassword Integer32,
cryptoModuleCapResetToFactory CryptoFspR7EncryptionResetCaps,
cryptoModuleCapFirmwareUpdateState CryptoFspR7EnableDisableCaps,
cryptoModuleCapFirmwareVersion Integer32,
cryptoModuleCapSelfTestOperation CryptoFspR7SelfTestOperationCaps,
cryptoModuleCapCryBoot CryptoFspR7CryBootCaps }
cryptoModuleCapCryptoOfficerPassword OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt
of this object will result with noSuchName error."
::= { cryptoModuleCapEntry 1 }
cryptoModuleCapResetToFactory OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionResetCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Executes 'reset to factory' action."
::= { cryptoModuleCapEntry 2 }
cryptoModuleCapFirmwareUpdateState OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisableCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines if it is allowed for a module to perform firmware upgrade."
::= { cryptoModuleCapEntry 3 }
cryptoModuleCapFirmwareVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware package version designated for an upgrade."
::= { cryptoModuleCapEntry 4 }
cryptoModuleCapSelfTestOperation OBJECT-TYPE
SYNTAX CryptoFspR7SelfTestOperationCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Starts self-tests."
::= { cryptoModuleCapEntry 5 }
cryptoModuleCapCryBoot OBJECT-TYPE
SYNTAX CryptoFspR7CryBootCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption Restart"
::= { cryptoModuleCapEntry 6 }
-- port encryption configuration
cryptoPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related writeable parameters defined per port."
::= { portEncryptionObjects 12 }
cryptoPortConfigEntry OBJECT-TYPE
SYNTAX CryptoPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable port."
INDEX {
cryptoPortConfigIndex
}
::= { cryptoPortConfigTable 1 }
CryptoPortConfigEntry ::= SEQUENCE
{ cryptoPortConfigIndex EntityIndex,
cryptoPortConfigAuthKey SnmpAdminString,
cryptoPortConfigAuthKeyLifeTime CryptoFspR7SessionKeyLifetime,
cryptoPortConfigEncryptionOffState CryptoFspR7EnableDisable,
cryptoPortConfigEncryptionOff CryptoFspR7EncryptionSwitch,
cryptoPortConfigForceKeyExchange CryptoFspR7ForceKeyExchange,
cryptoPortConfigKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClear }
cryptoPortConfigIndex OBJECT-TYPE
SYNTAX EntityIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address of an encryption capable port."
::= { cryptoPortConfigEntry 1 }
cryptoPortConfigAuthKey OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Encryption password being an input to generate an authentication key used to
traffic encryption between ports. This object can be write only. Read attempt
will fail with noSuchName error."
::= { cryptoPortConfigEntry 2 }
cryptoPortConfigAuthKeyLifeTime OBJECT-TYPE
SYNTAX CryptoFspR7SessionKeyLifetime
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Determines a life period of an introduced authentication key for a traffic encryption."
::= { cryptoPortConfigEntry 3 }
cryptoPortConfigEncryptionOffState OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable possibility of using encryption switch. This is an additional trigger required to
make a transition into transparent mode in two steps."
::= { cryptoPortConfigEntry 4 }
cryptoPortConfigEncryptionOff OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Disable/enable encryption switch."
::= { cryptoPortConfigEntry 5 }
cryptoPortConfigForceKeyExchange OBJECT-TYPE
SYNTAX CryptoFspR7ForceKeyExchange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Force key exchange."
::= { cryptoPortConfigEntry 6 }
cryptoPortConfigKeyExchangeForcedClear OBJECT-TYPE
SYNTAX CryptoFspR7KeyExchangeForcedClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clears on demand the alarmEncryptionPortKeyExchangeForced condition."
::= { cryptoPortConfigEntry 7 }
-- port encryption monitoring
cryptoPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related readable parameters defined per port."
::= { portEncryptionObjects 13 }
cryptoPortStatusEntry OBJECT-TYPE
SYNTAX CryptoPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable port."
INDEX {
cryptoPortStatusIndex
}
::= { cryptoPortStatusTable 1 }
CryptoPortStatusEntry ::= SEQUENCE
{ cryptoPortStatusIndex EntityIndex,
cryptoPortStatusEncryptionOffTimeRemaining Unsigned32,
cryptoPortStatusFailureKeyExchangeCount Unsigned32,
cryptoPortStatusSuccessfulKeyExchangeDateAndTime DateAndTime,
cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime DateAndTime,
cryptoPortStatusAuthKeyLifeTimeRemaining Unsigned32,
cryptoPortStatusEncryptionOffCapability CryptoFspR7EnableDisable }
cryptoPortStatusIndex OBJECT-TYPE
SYNTAX EntityIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Address of an encryption capable module."
::= { cryptoPortStatusEntry 1 }
cryptoPortStatusEncryptionOffTimeRemaining OBJECT-TYPE
SYNTAX Unsigned32
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about amount of minutes remaining to restore traffic encryption."
::= { cryptoPortStatusEntry 2 }
cryptoPortStatusFailureKeyExchangeCount OBJECT-TYPE
SYNTAX Unsigned32 (0..3 | 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Numbers of unsuccessful encryption key exchanges since the successful one."
::= { cryptoPortStatusEntry 3 }
cryptoPortStatusSuccessfulKeyExchangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a recent successful encryption key exchange."
::= { cryptoPortStatusEntry 4 }
cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a recent unsuccessful encryption key exchange."
::= { cryptoPortStatusEntry 5 }
cryptoPortStatusAuthKeyLifeTimeRemaining OBJECT-TYPE
SYNTAX Unsigned32
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting."
::= { cryptoPortStatusEntry 6 }
cryptoPortStatusEncryptionOffCapability OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisable
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Capability for encryption switch."
::= { cryptoPortStatusEntry 7 }
-- five index scheme port encryption
cryptoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related parameters defined per port."
::= { portEncryptionObjects 20 }
cryptoPortEntry OBJECT-TYPE
SYNTAX CryptoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable port."
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { cryptoPortTable 1 }
CryptoPortEntry ::= SEQUENCE
{ cryptoPortAuthKey SnmpAdminString,
cryptoPortAuthKeyLifeTime CryptoFspR7SessionKeyLifetime,
cryptoPortEncryptionOffState CryptoFspR7EnableDisable,
cryptoPortEncryptionOff CryptoFspR7EncryptionSwitch,
cryptoPortForceKeyExchange CryptoFspR7ForceKeyExchange,
cryptoPortKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClear,
cryptoPortEncryptionOffTimeRemaining Unsigned32,
cryptoPortFailureKeyExchangeCount Unsigned32,
cryptoPortSuccessfulKeyExchangeDateAndTime DateAndTime,
cryptoPortUnsuccessfulKeyExchangeDateAndTime DateAndTime,
cryptoPortAuthKeyLifeTimeRemaining Unsigned32,
cryptoPortTagFailureLimit Unsigned32,
cryptoPortTagFailurePeriod Unsigned32,
cryptoPortTagReceiveFailures Unsigned32,
cryptoPortTagClear CryptoFspR7KeyExchangeForcedClear,
cryptoPortEncryptionChannel CryptoFspR7EncryptionCommunication,
cryptoPortTagFailTimeExpiration Unsigned32,
cryptoPortGenAuthKey FspR7RlsAction,
cryptoPortAcceptFpKeyRx FspR7RlsAction,
cryptoPortFpKey FspR7SnmpHexString,
cryptoPortFpKeyRx FspR7SnmpHexString }
cryptoPortAuthKey OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Encryption password being an input to generate an authentication key used to
traffic encryption between ports. This object can be write only. Read attempt
will fail with noSuchName error."
::= { cryptoPortEntry 1 }
cryptoPortAuthKeyLifeTime OBJECT-TYPE
SYNTAX CryptoFspR7SessionKeyLifetime
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Determines a life period of an introduced authentication key for a traffic encryption."
::= { cryptoPortEntry 2 }
cryptoPortEncryptionOffState OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisable
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable possibility of using encryption switch. This is an additional trigger required to
make a transition into transparent mode in two steps."
::= { cryptoPortEntry 3 }
cryptoPortEncryptionOff OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionSwitch
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Disable/enable encryption switch."
::= { cryptoPortEntry 4 }
cryptoPortForceKeyExchange OBJECT-TYPE
SYNTAX CryptoFspR7ForceKeyExchange
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Force key exchange."
::= { cryptoPortEntry 5 }
cryptoPortKeyExchangeForcedClear OBJECT-TYPE
SYNTAX CryptoFspR7KeyExchangeForcedClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clears on demand the alarmEncryptionPortKeyExchangeForced condition."
::= { cryptoPortEntry 6 }
cryptoPortEncryptionOffTimeRemaining OBJECT-TYPE
SYNTAX Unsigned32
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about amount of minutes remaining to restore traffic encryption."
::= { cryptoPortEntry 7 }
cryptoPortFailureKeyExchangeCount OBJECT-TYPE
SYNTAX Unsigned32 (0..3 | 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Numbers of unsuccessful encryption key exchanges since the successful one."
::= { cryptoPortEntry 8 }
cryptoPortSuccessfulKeyExchangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a recent successful encryption key exchange."
::= { cryptoPortEntry 9 }
cryptoPortUnsuccessfulKeyExchangeDateAndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date and time of a recent unsuccessful encryption key exchange."
::= { cryptoPortEntry 10 }
cryptoPortAuthKeyLifeTimeRemaining OBJECT-TYPE
SYNTAX Unsigned32
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting."
::= { cryptoPortEntry 11 }
cryptoPortTagFailureLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..100 | 4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of Ethernet packets received with a tag errors in the specified time window (TAGFAIL-TIMER) that causes the 'Tag Error-Limit Reached' (TAG-FAIL) alarm to be generated"
::= { cryptoPortEntry 12 }
cryptoPortTagFailurePeriod OBJECT-TYPE
SYNTAX Unsigned32 (10..28800 | 4294967295)
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Time window Ethernet packets with tag errors are counted/accumualted for alarm purposes"
::= { cryptoPortEntry 13 }
cryptoPortTagReceiveFailures OBJECT-TYPE
SYNTAX Unsigned32 (0..3 | 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Count of Ethernet packets received with a tag error in the specified time window (TAGFAIL-TIMER)"
::= { cryptoPortEntry 14 }
cryptoPortTagClear OBJECT-TYPE
SYNTAX CryptoFspR7KeyExchangeForcedClear
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Allows the operator to reset (zero) the Ethernet packet tag error count for the current specified time window (TAGFAIL-TIME)"
::= { cryptoPortEntry 15 }
cryptoPortEncryptionChannel OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionCommunication
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Embedded Communication Channel used to support Encryption"
::= { cryptoPortEntry 16 }
cryptoPortTagFailTimeExpiration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Count down of time window for Ethernet packets with tag errors for alarm purposes"
::= { cryptoPortEntry 17 }
cryptoPortGenAuthKey OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Generate new authentication key"
::= { cryptoPortEntry 18 }
cryptoPortAcceptFpKeyRx OBJECT-TYPE
SYNTAX FspR7RlsAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Accept Authentication key received from far end"
::= { cryptoPortEntry 19 }
cryptoPortFpKey OBJECT-TYPE
SYNTAX FspR7SnmpHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Authentication Key"
::= { cryptoPortEntry 20 }
cryptoPortFpKeyRx OBJECT-TYPE
SYNTAX FspR7SnmpHexString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Authentication key received from the far end"
::= { cryptoPortEntry 21 }
cryptoPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related parameters defined per port."
::= { portEncryptionObjects 21 }
cryptoPortCapEntry OBJECT-TYPE
SYNTAX CryptoPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents an encryption-capable port."
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { cryptoPortCapTable 1 }
CryptoPortCapEntry ::= SEQUENCE
{ cryptoPortCapAuthKey Integer32,
cryptoPortCapAuthKeyLifeTime CryptoFspR7SessionKeyLifetimeCaps,
cryptoPortCapEncryptionOffState CryptoFspR7EnableDisableCaps,
cryptoPortCapEncryptionOff CryptoFspR7EncryptionSwitchCaps,
cryptoPortCapForceKeyExchange CryptoFspR7ForceKeyExchangeCaps,
cryptoPortCapKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClearCaps,
cryptoPortCapTagFailureLimit FspR7Unsigned32Caps,
cryptoPortCapTagFailurePeriod FspR7Unsigned32Caps,
cryptoPortCapTagClear CryptoFspR7KeyExchangeForcedClearCaps,
cryptoPortCapEncryptionChannel CryptoFspR7EncryptionCommunicationCaps,
cryptoPortCapGenAuthKey FspR7RlsActionCaps,
cryptoPortCapAcceptAuthRxKey FspR7RlsActionCaps }
cryptoPortCapAuthKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption password being an input to generate an authentication key used to
traffic encryption between ports. This object can be write only. Read attempt
will fail with noSuchName error."
::= { cryptoPortCapEntry 1 }
cryptoPortCapAuthKeyLifeTime OBJECT-TYPE
SYNTAX CryptoFspR7SessionKeyLifetimeCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Determines a life period of an introduced authentication key for a traffic encryption."
::= { cryptoPortCapEntry 2 }
cryptoPortCapEncryptionOffState OBJECT-TYPE
SYNTAX CryptoFspR7EnableDisableCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enable/disable possibility of using encryption switch. This is an additional trigger required to
make a transition into transparent mode in two steps."
::= { cryptoPortCapEntry 3 }
cryptoPortCapEncryptionOff OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionSwitchCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Disable/enable encryption switch."
::= { cryptoPortCapEntry 4 }
cryptoPortCapForceKeyExchange OBJECT-TYPE
SYNTAX CryptoFspR7ForceKeyExchangeCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Force key exchange."
::= { cryptoPortCapEntry 5 }
cryptoPortCapKeyExchangeForcedClear OBJECT-TYPE
SYNTAX CryptoFspR7KeyExchangeForcedClearCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clears on demand the alarmEncryptionPortKeyExchangeForced condition."
::= { cryptoPortCapEntry 6 }
cryptoPortCapTagFailureLimit OBJECT-TYPE
SYNTAX FspR7Unsigned32Caps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of Ethernet packets received with a tag errors in the specified time window (TAGFAIL-TIMER) that causes the 'Tag Error-Limit Reached' (TAG-FAIL) alarm to be generated"
::= { cryptoPortCapEntry 7 }
cryptoPortCapTagFailurePeriod OBJECT-TYPE
SYNTAX FspR7Unsigned32Caps
UNITS "s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time window Ethernet packets with tag errors are counted/accumualted for alarm purposes"
::= { cryptoPortCapEntry 8 }
cryptoPortCapTagClear OBJECT-TYPE
SYNTAX CryptoFspR7KeyExchangeForcedClearCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Allows the operator to reset (zero) the Ethernet packet tag error count for the current specified time window (TAGFAIL-TIME)"
::= { cryptoPortCapEntry 9 }
cryptoPortCapEncryptionChannel OBJECT-TYPE
SYNTAX CryptoFspR7EncryptionCommunicationCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Embedded Communication Channel used to support Encryption"
::= { cryptoPortCapEntry 10 }
cryptoPortCapGenAuthKey OBJECT-TYPE
SYNTAX FspR7RlsActionCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Generate new authentication key"
::= { cryptoPortCapEntry 11 }
cryptoPortCapAcceptAuthRxKey OBJECT-TYPE
SYNTAX FspR7RlsActionCaps
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Accept Authentication key received from far end"
::= { cryptoPortCapEntry 12 }
-- performance monitoring of an encrypted port
intervalEncryptionSublayerPm15minTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntervalEncryptionSublayerPm15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains encryption-related performance monitoring 15-min
values related to channel ports."
::= { encryptionPerformanceMonitoring 1 }
intervalEncryptionSublayerPm15minEntry OBJECT-TYPE
SYNTAX IntervalEncryptionSublayerPm15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityIndex,
intervalEncryptionSublayerPm15minNumber
}
::= { intervalEncryptionSublayerPm15minTable 1 }
IntervalEncryptionSublayerPm15minEntry ::= SEQUENCE
{ intervalEncryptionSublayerPm15minNumber Integer32,
intervalEncryptionSublayerPm15minEncryptionRunSeconds Unsigned32,
intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds Unsigned32,
intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds Unsigned32,
intervalEncryptionSublayerPm15minValidFlag TruthValue,
intervalEncryptionSublayerPm15minTimeStamp DateAndTime }
intervalEncryptionSublayerPm15minNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A number between 1 and 96, which identifies the interval for
which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and the interval identified by N is the interval
immediately preceding the one identified by N-1."
::= { intervalEncryptionSublayerPm15minEntry 1 }
intervalEncryptionSublayerPm15minEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about time period (seconds) during encryption mode."
::= { intervalEncryptionSublayerPm15minEntry 2 }
intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about errorous time period (seconds) during encryption mode."
::= { intervalEncryptionSublayerPm15minEntry 3 }
intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about degraded time period (seconds) during encryption mode."
::= { intervalEncryptionSublayerPm15minEntry 4 }
intervalEncryptionSublayerPm15minValidFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Valid Flag"
::= { intervalEncryptionSublayerPm15minEntry 5 }
intervalEncryptionSublayerPm15minTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp"
::= { intervalEncryptionSublayerPm15minEntry 6 }
intervalEncryptionSublayerPm1dayTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntervalEncryptionSublayerPm1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains interval encryption-related performance monitoring 15-min
values related to channel ports."
::= { encryptionPerformanceMonitoring 2 }
intervalEncryptionSublayerPm1dayEntry OBJECT-TYPE
SYNTAX IntervalEncryptionSublayerPm1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityIndex,
intervalEncryptionSublayerPm1dayNumber
}
::= { intervalEncryptionSublayerPm1dayTable 1 }
IntervalEncryptionSublayerPm1dayEntry ::= SEQUENCE
{ intervalEncryptionSublayerPm1dayNumber Integer32,
intervalEncryptionSublayerPm1dayEncryptionRunSeconds Unsigned32,
intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds Unsigned32,
intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds Unsigned32,
intervalEncryptionSublayerPm1dayValidFlag TruthValue,
intervalEncryptionSublayerPm1dayTimeStamp DateAndTime }
intervalEncryptionSublayerPm1dayNumber OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A number, which identifies the interval for
which the set of statistics is available. The interval
identified by 1 is the most recently completed 1 day
interval."
::= { intervalEncryptionSublayerPm1dayEntry 1 }
intervalEncryptionSublayerPm1dayEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about time period (seconds) during encryption mode."
::= { intervalEncryptionSublayerPm1dayEntry 2 }
intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about errorous time period (seconds) during encryption mode."
::= { intervalEncryptionSublayerPm1dayEntry 3 }
intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about degraded time period (seconds) during encryption mode."
::= { intervalEncryptionSublayerPm1dayEntry 4 }
intervalEncryptionSublayerPm1dayValidFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Valid Flag"
::= { intervalEncryptionSublayerPm1dayEntry 5 }
intervalEncryptionSublayerPm1dayTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp"
::= { intervalEncryptionSublayerPm1dayEntry 6 }
currentEncryptionSublayerPm15minTable OBJECT-TYPE
SYNTAX SEQUENCE OF CurrentEncryptionSublayerPm15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains current encryption-related performance monitoring 15-min
values related to channel ports."
::= { encryptionPerformanceMonitoring 3 }
currentEncryptionSublayerPm15minEntry OBJECT-TYPE
SYNTAX CurrentEncryptionSublayerPm15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityIndex
}
::= { currentEncryptionSublayerPm15minTable 1 }
CurrentEncryptionSublayerPm15minEntry ::= SEQUENCE
{ currentEncryptionSublayerPm15minEncryptionRunSeconds Unsigned32,
currentEncryptionSublayerPm15minEncryptionRunErrorSeconds Unsigned32,
currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds Unsigned32,
currentEncryptionSublayerPm15minElapsedTime Integer32 }
currentEncryptionSublayerPm15minEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption running seconds"
::= { currentEncryptionSublayerPm15minEntry 1 }
currentEncryptionSublayerPm15minEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption Errored Seconds"
::= { currentEncryptionSublayerPm15minEntry 2 }
currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption in degrade mode seconds"
::= { currentEncryptionSublayerPm15minEntry 3 }
currentEncryptionSublayerPm15minElapsedTime OBJECT-TYPE
SYNTAX Integer32 (0..9000 | -2147483648)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Elapsed 15Min"
::= { currentEncryptionSublayerPm15minEntry 4 }
currentEncryptionSublayerPm1dayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CurrentEncryptionSublayerPm1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains current encryption-related performance monitoring 1-day
values related to channel ports."
::= { encryptionPerformanceMonitoring 4 }
currentEncryptionSublayerPm1dayEntry OBJECT-TYPE
SYNTAX CurrentEncryptionSublayerPm1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityIndex
}
::= { currentEncryptionSublayerPm1dayTable 1 }
CurrentEncryptionSublayerPm1dayEntry ::= SEQUENCE
{ currentEncryptionSublayerPm1dayEncryptionRunSeconds Unsigned32,
currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds Unsigned32,
currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds Unsigned32,
currentEncryptionSublayerPm1dayElapsedTime Integer32 }
currentEncryptionSublayerPm1dayEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption running seconds"
::= { currentEncryptionSublayerPm1dayEntry 1 }
currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption Errored Seconds"
::= { currentEncryptionSublayerPm1dayEntry 2 }
currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption in degrade mode seconds"
::= { currentEncryptionSublayerPm1dayEntry 3 }
currentEncryptionSublayerPm1dayElapsedTime OBJECT-TYPE
SYNTAX Integer32 (0..86400 | -2147483648)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Elapsed 1Day"
::= { currentEncryptionSublayerPm1dayEntry 4 }
-- five index scheme performance monitoring of an encrypted port
cryFacilityCurrent15minTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryFacilityCurrent15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains current encryption-related performance monitoring 15-min
values related to channel ports."
::= { encryptionPerformanceMonitoring 10 }
cryFacilityCurrent15minEntry OBJECT-TYPE
SYNTAX CryFacilityCurrent15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { cryFacilityCurrent15minTable 1 }
CryFacilityCurrent15minEntry ::= SEQUENCE
{ cryFacilityCurrent15minEncryptionRunSeconds Unsigned32,
cryFacilityCurrent15minEncryptionRunErrorSeconds Unsigned32,
cryFacilityCurrent15minEncryptionRunDegradeSeconds Unsigned32,
cryFacilityCurrent15minElapsedTime Integer32 }
cryFacilityCurrent15minEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption running seconds"
::= { cryFacilityCurrent15minEntry 1 }
cryFacilityCurrent15minEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption Errored Seconds"
::= { cryFacilityCurrent15minEntry 2 }
cryFacilityCurrent15minEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption in degrade mode seconds"
::= { cryFacilityCurrent15minEntry 3 }
cryFacilityCurrent15minElapsedTime OBJECT-TYPE
SYNTAX Integer32 (0..9000 | -2147483648)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Elapsed 15Min"
::= { cryFacilityCurrent15minEntry 4 }
cryFacilityCurrent1dayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryFacilityCurrent1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains current encryption-related performance monitoring 1-day
values related to channel ports."
::= { encryptionPerformanceMonitoring 11 }
cryFacilityCurrent1dayEntry OBJECT-TYPE
SYNTAX CryFacilityCurrent1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName
}
::= { cryFacilityCurrent1dayTable 1 }
CryFacilityCurrent1dayEntry ::= SEQUENCE
{ cryFacilityCurrent1dayEncryptionRunSeconds Unsigned32,
cryFacilityCurrent1dayEncryptionRunErrorSeconds Unsigned32,
cryFacilityCurrent1dayEncryptionRunDegradeSeconds Unsigned32,
cryFacilityCurrent1dayElapsedTime Integer32 }
cryFacilityCurrent1dayEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption running seconds"
::= { cryFacilityCurrent1dayEntry 1 }
cryFacilityCurrent1dayEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption Errored Seconds"
::= { cryFacilityCurrent1dayEntry 2 }
cryFacilityCurrent1dayEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encryption in degrade mode seconds"
::= { cryFacilityCurrent1dayEntry 3 }
cryFacilityCurrent1dayElapsedTime OBJECT-TYPE
SYNTAX Integer32 (0..86400 | -2147483648)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Elapsed 1Day"
::= { cryFacilityCurrent1dayEntry 4 }
cryFacilityHistorical15minTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryFacilityHistorical15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains historical encryption-related performance monitoring 15-min
values related to channel ports."
::= { encryptionPerformanceMonitoring 12 }
cryFacilityHistorical15minEntry OBJECT-TYPE
SYNTAX CryFacilityHistorical15minEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName,
cryFacilityHistorical15minNumber
}
::= { cryFacilityHistorical15minTable 1 }
CryFacilityHistorical15minEntry ::= SEQUENCE
{ cryFacilityHistorical15minNumber Integer32,
cryFacilityHistorical15minEncryptionRunSeconds Unsigned32,
cryFacilityHistorical15minEncryptionRunErrorSeconds Unsigned32,
cryFacilityHistorical15minEncryptionRunDegradeSeconds Unsigned32,
cryFacilityHistorical15minValidFlag TruthValue,
cryFacilityHistorical15minTimeStamp DateAndTime }
cryFacilityHistorical15minNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A number between 1 and 96, which identifies the interval for
which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and the interval identified by N is the interval
immediately preceding the one identified by N-1."
::= { cryFacilityHistorical15minEntry 1 }
cryFacilityHistorical15minEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about time period (seconds) during encryption mode."
::= { cryFacilityHistorical15minEntry 2 }
cryFacilityHistorical15minEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about errorous time period (seconds) during encryption mode."
::= { cryFacilityHistorical15minEntry 3 }
cryFacilityHistorical15minEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about degraded time period (seconds) during encryption mode."
::= { cryFacilityHistorical15minEntry 4 }
cryFacilityHistorical15minValidFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Valid Flag"
::= { cryFacilityHistorical15minEntry 5 }
cryFacilityHistorical15minTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp"
::= { cryFacilityHistorical15minEntry 6 }
cryFacilityHistorical1dayTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryFacilityHistorical1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains historical encryption-related performance monitoring 1-day
values related to channel ports."
::= { encryptionPerformanceMonitoring 13 }
cryFacilityHistorical1dayEntry OBJECT-TYPE
SYNTAX CryFacilityHistorical1dayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Every row of this table represents performance monitoring entry."
INDEX {
entityFacilityShelfNo,
entityFacilitySlotNo,
entityFacilityPortNo,
entityFacilityExtNo,
entityFacilityClassName,
cryFacilityHistorical1dayNumber
}
::= { cryFacilityHistorical1dayTable 1 }
CryFacilityHistorical1dayEntry ::= SEQUENCE
{ cryFacilityHistorical1dayNumber Integer32,
cryFacilityHistorical1dayEncryptionRunSeconds Unsigned32,
cryFacilityHistorical1dayEncryptionRunErrorSeconds Unsigned32,
cryFacilityHistorical1dayEncryptionRunDegradeSeconds Unsigned32,
cryFacilityHistorical1dayValidFlag TruthValue,
cryFacilityHistorical1dayTimeStamp DateAndTime }
cryFacilityHistorical1dayNumber OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A number, which identifies the interval for
which the set of statistics is available. The interval
identified by 1 is the most recently completed 1 day
interval."
::= { cryFacilityHistorical1dayEntry 1 }
cryFacilityHistorical1dayEncryptionRunSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about time period (seconds) during encryption mode."
::= { cryFacilityHistorical1dayEntry 2 }
cryFacilityHistorical1dayEncryptionRunErrorSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about errorous time period (seconds) during encryption mode."
::= { cryFacilityHistorical1dayEntry 3 }
cryFacilityHistorical1dayEncryptionRunDegradeSeconds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Informs about degraded time period (seconds) during encryption mode."
::= { cryFacilityHistorical1dayEntry 4 }
cryFacilityHistorical1dayValidFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Valid Flag"
::= { cryFacilityHistorical1dayEntry 5 }
cryFacilityHistorical1dayTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp"
::= { cryFacilityHistorical1dayEntry 6 }
cryptoRequestErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CryptoRequestErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table shows a list of last 100 snmpset requests which failed."
::= { encryptionDiagnostics 1 }
cryptoRequestErrorEntry OBJECT-TYPE
SYNTAX CryptoRequestErrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of cryptoRequestError"
INDEX {
cryptoRequestErrorId
}
::= { cryptoRequestErrorTable 1 }
CryptoRequestErrorEntry ::= SEQUENCE
{ cryptoRequestErrorId Unsigned32,
cryptoRequestErrorType FspR7RequestErrorType,
cryptoRequestErrorAesSpecific FspR7RequestErrorTypeAes,
cryptoRequestErrorTimeStamp DateAndTime }
cryptoRequestErrorId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Request ID"
::= { cryptoRequestErrorEntry 1 }
cryptoRequestErrorType OBJECT-TYPE
SYNTAX FspR7RequestErrorType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Generic error code"
::= { cryptoRequestErrorEntry 2 }
cryptoRequestErrorAesSpecific OBJECT-TYPE
SYNTAX FspR7RequestErrorTypeAes
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specific error code for Encryption Module"
::= { cryptoRequestErrorEntry 3 }
cryptoRequestErrorTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Timestamp"
::= { cryptoRequestErrorEntry 4 }
END
Reference in New Issue Copy Permalink