296 lines
12 KiB
Plaintext
296 lines
12 KiB
Plaintext
|
OS-COMMON-TC-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
-- *****************************************************************************
|
||
|
|
-- TEXTUAL-CONVENTIONs MIB for all os... MIBs
|
||
|
|
-- *****************************************************************************
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, enterprises, Integer32, Unsigned32
|
||
|
|
FROM SNMPv2-SMI -- RFC 2578
|
||
|
|
TEXTUAL-CONVENTION
|
||
|
|
FROM SNMPv2-TC; -- RFC 2579
|
||
|
|
|
||
|
|
osCommonTcMib MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201801020000Z" -- 02 Jan. 2018
|
||
|
|
ORGANIZATION "MRV Communications, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Alex Ruzin
|
||
|
|
ADVA Optical Networking SE
|
||
|
|
Email: ARuzin@advaoptical.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB module defines the textual conventions used
|
||
|
|
throughout the all os... and nb... MIB modules.
|
||
|
|
Copyright 2018 ADVA Optical Networking SE.
|
||
|
|
All rights reserved."
|
||
|
|
|
||
|
|
REVISION "201801020000Z" -- 02 Jan. 2018
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial Version."
|
||
|
|
::= { oaOptiSwitch 6400 }
|
||
|
|
|
||
|
|
-- ************************************************************
|
||
|
|
-- MIB place Definition
|
||
|
|
-- ************************************************************
|
||
|
|
nbase OBJECT IDENTIFIER ::= { enterprises 629 }
|
||
|
|
oaccess OBJECT IDENTIFIER ::= { enterprises 6926 }
|
||
|
|
nbSwitchG1 OBJECT IDENTIFIER ::= { nbase 1 }
|
||
|
|
adva OBJECT IDENTIFIER ::= { nbase 2544 }
|
||
|
|
nbSwitchG1Il OBJECT IDENTIFIER ::= { nbSwitchG1 50}
|
||
|
|
oaOptiSwitch OBJECT IDENTIFIER ::= { oaccess 2 }
|
||
|
|
|
||
|
|
-- ************************************************************
|
||
|
|
-- Textual converions
|
||
|
|
-- ************************************************************
|
||
|
|
|
||
|
|
OsCfmMepIdOrZero ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maintenance association End Point Identifier (MEPID): A small
|
||
|
|
integer, unique over a given Maintenance Association,
|
||
|
|
identifying a specific MEP.
|
||
|
|
|
||
|
|
The special value 0 is allowed to indicate special cases, for
|
||
|
|
example that no MEPID is configured.
|
||
|
|
|
||
|
|
Whenever an object is defined with this SYNTAX, then the
|
||
|
|
DESCRIPTION clause of such an object MUST specify what the
|
||
|
|
special value of 0 means.
|
||
|
|
|
||
|
|
This object is different from Dot1agCfmMepIdOrZero that its upper limit
|
||
|
|
is 4K instead of 8K."
|
||
|
|
|
||
|
|
REFERENCE
|
||
|
|
"802.1ag clause 19.2.1"
|
||
|
|
SYNTAX Unsigned32 (0 | 1..4095)
|
||
|
|
|
||
|
|
|
||
|
|
EntityName ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "255a"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "An octet string containing administrative
|
||
|
|
information in human-readable form.
|
||
|
|
Represents textual information taken from the NVT ASCII
|
||
|
|
character set, as defined in pages 4, 10-11 of RFC 854.
|
||
|
|
Additional restrictions are:
|
||
|
|
- NUL, LF, CR, BEL, BS, HT, VT and FF are prohibited
|
||
|
|
- SP (White space) and '?' (Question mark) are strictly forbidden."
|
||
|
|
SYNTAX OCTET STRING (SIZE (1..30))
|
||
|
|
|
||
|
|
EntityNameOrNone ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "255a"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION "Extends EntityName wth empty value."
|
||
|
|
SYNTAX OCTET STRING (SIZE (0..30))
|
||
|
|
|
||
|
|
BwAccountStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of accounting for a service/flow.
|
||
|
|
An agent always returns value enabled(3) or value
|
||
|
|
disabled(4) as a response on GET operation. For SET
|
||
|
|
operation all 3 values are valid."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
clear (2),
|
||
|
|
enabled (3),
|
||
|
|
disabled (4)
|
||
|
|
}
|
||
|
|
|
||
|
|
EntryValidator ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Admin Status for controlling of the entry."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
nothing (2),
|
||
|
|
delete (3),
|
||
|
|
create (4)
|
||
|
|
}
|
||
|
|
|
||
|
|
ProfileStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Status of a profile, reported it's being busy: the profile is busy, it there is at least one
|
||
|
|
service, using it."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
busy (5),
|
||
|
|
free (6),
|
||
|
|
underProcessing (9)
|
||
|
|
}
|
||
|
|
|
||
|
|
PortIndex ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A unique value, greater than zero, for each Port or
|
||
|
|
in the managed system.
|
||
|
|
The value for each Port must remain
|
||
|
|
constant at least from one re-initialization of the entity's
|
||
|
|
network management system to the next re-initialization.
|
||
|
|
Actual limit is SNMP object osPortCfgMaxNumberOfPort.
|
||
|
|
All Ports with PortIndex greater or equal osPortCfgBaseTrunkPortIndex are Ethernet Channels."
|
||
|
|
SYNTAX Unsigned32 (1..2147483647)
|
||
|
|
|
||
|
|
PortIndexOrNone ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"See PortIndex, it is his extension for a case of <None>."
|
||
|
|
SYNTAX Integer32 (0|1..2147483647)
|
||
|
|
|
||
|
|
CfmMDLevel ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Is an extension of Dot1agCfmMDLevel - value -1 means undefined.
|
||
|
|
Integer identifying the Maintenance Domain Level (MD Level).
|
||
|
|
Higher numbers correspond to higher Maintenance Domains,
|
||
|
|
those with the greatest physical reach, with the highest
|
||
|
|
values for customers' CFM PDUs. Lower numbers correspond
|
||
|
|
to lower Maintenance Domains, those with more limited
|
||
|
|
physical reach, with the lowest values for CFM PDUs
|
||
|
|
protecting single bridges or physical links.
|
||
|
|
The value '-1' means, that MD Level is undefined."
|
||
|
|
REFERENCE
|
||
|
|
"802.1ag clauses 18.3, 21.4.1"
|
||
|
|
SYNTAX Integer32 (-1|0..7)
|
||
|
|
|
||
|
|
|
||
|
|
CoS ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of Class of Service (also referred to as of service level).
|
||
|
|
While in devices it also defines an egress queue, the upper limit may
|
||
|
|
be greater then 7. Actual upper limit may be read in osEthMaxSlValue."
|
||
|
|
SYNTAX Unsigned32 (1..4294967295)
|
||
|
|
|
||
|
|
ServFlowId ::= TEXTUAL-CONVENTION
|
||
|
|
DISPLAY-HINT "d"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value 0 means, that this entry corresponds to the service, not to to any flow."
|
||
|
|
SYNTAX Unsigned32 (0|1..4294967295)
|
||
|
|
|
||
|
|
PortList ::= TEXTUAL-CONVENTION
|
||
|
|
-- DISPLAY-HINT "1x"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each octet within this value specifies a set of eight
|
||
|
|
ports, with the first octet specifying ports 1 through
|
||
|
|
8, the second octet specifying ports 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered port, and the least significant bit
|
||
|
|
represents the highest numbered port. Thus, each port
|
||
|
|
of the bridge is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1',
|
||
|
|
then that port is included in the set of ports; the port
|
||
|
|
is not included if its bit has a value of '0'."
|
||
|
|
REFERENCE
|
||
|
|
"Q-BRIDGE-MIB DEFINITIONS."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..32))
|
||
|
|
|
||
|
|
TagList ::= TEXTUAL-CONVENTION
|
||
|
|
-- DISPLAY-HINT "1x"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each octet within this value specifies a set of eight
|
||
|
|
tags, with the first octet specifying tags 1 through
|
||
|
|
8, the second octet specifying tags 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered tag, and the least significant bit
|
||
|
|
represents the highest numbered tag. Thus, each tag
|
||
|
|
is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1',
|
||
|
|
then that tag is included in the set of tags; the tag
|
||
|
|
is not included if its bit has a value of '0'."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..512))
|
||
|
|
|
||
|
|
MepList ::= TEXTUAL-CONVENTION
|
||
|
|
-- DISPLAY-HINT "1x"
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each octet within this value specifies a set of eight
|
||
|
|
remote MEPs, with the first octet specifying remote
|
||
|
|
MEP IDs 1 through 8, the second octet specifying remote
|
||
|
|
MEP IDs 9 through 16, etc.
|
||
|
|
Within each octet, the most significant bit represents
|
||
|
|
the lowest numbered remote MEP Id, and the least significant bit
|
||
|
|
represents the highest numbered remote MEP Id. Thus, each remote MEP Id
|
||
|
|
is represented by a single bit within the
|
||
|
|
value of this object. If that bit has a value of '1',
|
||
|
|
then that remote MEP Id is included in the list; the remote MEP Id
|
||
|
|
is not included if its bit has a value of '0'."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..512))
|
||
|
|
|
||
|
|
ServiceType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Type of the service per node.
|
||
|
|
portBasedUni(2) - port based UNI (epl, ep-lan)
|
||
|
|
vlanBasedUni(3) - vlan based UNI (evpl, evp-lan)
|
||
|
|
legacyEpLan (4) - for backward conpatibility, see below
|
||
|
|
legacyEvpLan(5) - for backward conpatibility, see below
|
||
|
|
vlanBasedINni(8) - vlan based internal NNI (former aggregation)
|
||
|
|
portBasedINni(9) - port based internal NNI
|
||
|
|
vlanBasedENni(8) - vlan based external NNI
|
||
|
|
portBasedENni(9) - port based external NNI
|
||
|
|
|
||
|
|
There is at least one difference between internal NNI and external NNI: if a service
|
||
|
|
does not contain MEP and contains only MIP, then MA does not have c-ports in
|
||
|
|
an internal NNI."
|
||
|
|
REFERENCE
|
||
|
|
"MEF 6.1, Clauses 7.1 - 7.6."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (1),
|
||
|
|
portBasedUni(2),
|
||
|
|
vlanBasedUni(3),
|
||
|
|
legacyEpLan (4),
|
||
|
|
legacyEvpLan(5),
|
||
|
|
vlanBasedINni(8),
|
||
|
|
portBasedINni(9),
|
||
|
|
vlanBasedENni(10),
|
||
|
|
portBasedENni(11)
|
||
|
|
}
|
||
|
|
|
||
|
|
StartTimeType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This enumeration data type indicates the type of start
|
||
|
|
time to indicate when a performance metric is
|
||
|
|
initiated.
|
||
|
|
|
||
|
|
The valid enumerated values associated with this type are:
|
||
|
|
|
||
|
|
none(1) The PM is never started
|
||
|
|
immediate(2) The PM is to begin immediately
|
||
|
|
relative(3) The PM is to begin a relative time from the current time
|
||
|
|
fixed(4) The PM is to begin at the given UTC time/date"
|
||
|
|
REFERENCE
|
||
|
|
"[SOAM-PM] R2"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
immediate(2),
|
||
|
|
relative(3),
|
||
|
|
fixed(4)
|
||
|
|
}
|
||
|
|
|
||
|
|
RespType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates the type of the responer:
|
||
|
|
- regular(1): The test was run against regular loopback device.
|
||
|
|
- generic(2): The test was run against generic loopback device."
|
||
|
|
|
||
|
|
REFERENCE
|
||
|
|
"RFC 2544, Clause 26."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown (0),
|
||
|
|
regular (1),
|
||
|
|
generic (2)
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
END
|