mibs/MIBS/allied/AT-IGMP-MIB

568 lines
15 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- AT-IGMP.MIB, Allied Telesis enterprise MIB:
-- Internet Group Management Protocol
--
-- Copyright (c) 2007 by Allied Telesis, Inc.
-- All rights reserved.
--
-- ============================================================================
AT-IGMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,OBJECT-TYPE,Unsigned32,IpAddress
FROM SNMPv2-SMI
DisplayString,TruthValue,MacAddress
FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB
modules FROM AT-SMI-MIB
;
igmp MODULE-IDENTITY
LAST-UPDATED "200708080000Z" -- August 8, 2007
ORGANIZATION "Allied Telesis, Inc."
CONTACT-INFO
" Stan Xiang,Hamish Kellahan
Allied Telesis
EMail: support@alliedtelesis.co.nz"
DESCRIPTION
"The MIB module for IGMP Management."
REVISION "200708080000Z" -- August 8, 2007
DESCRIPTION
"Initial version, to support IGMP membership status polling."
::= { modules 139 }
igmpIntInfo OBJECT IDENTIFIER ::= { igmp 1 }
igmpIntMember OBJECT IDENTIFIER ::= { igmp 9 }
igmpSnooping OBJECT IDENTIFIER ::= { igmp 10 }
--
-- The IGMP Interface Table
--
igmpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing IGMP capable IP interfaces."
::= { igmpIntInfo 1 }
igmpInterfaceEntry OBJECT-TYPE
SYNTAX IgmpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the igmpInterfaceTable."
INDEX { igmpInterface }
::= { igmpInterfaceTable 1 }
IgmpInterfaceEntry ::= SEQUENCE {
igmpInterface INTEGER,
igmpInterfaceName DisplayString,
igmpQueryTimeout Unsigned32,
igmpProxy INTEGER
}
igmpInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value of the interface for which IGMP is
enabled. This table is indexed by this value."
::= { igmpInterfaceEntry 1 }
igmpInterfaceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the interface for which IGMP or MLD is
enabled."
::= { igmpInterfaceEntry 2 }
igmpQueryTimeout OBJECT-TYPE
SYNTAX Unsigned32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It represents the maximum expected time interval, in seconds,
between successive IGMP general query messages arriving on
the interface. A vlaue of zero means there is no limits."
::= { igmpInterfaceEntry 3 }
igmpProxy OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
upstream(1),
downstream(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object represents states of igmp proxy. When it has a value of
0 then it means the inteface proxy is currently disabled. When it
has a value of 1 then it means IGMP is performing upstream inteface
proxying. When it has a value of 2 then it means IGMP is performing
downstream inteface proxying."
::= { igmpInterfaceEntry 4 }
igmpIntStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpIntStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing statistics for IGMP capable IP interfaces."
::= { igmpIntInfo 2 }
igmpIntStatsEntry OBJECT-TYPE
SYNTAX IgmpIntStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the igmpIntStatsTable."
INDEX { igmpInterface }
::= { igmpIntStatsTable 1 }
IgmpIntStatsEntry ::= SEQUENCE {
igmpInQuery Unsigned32,
igmpInReportV1 Unsigned32,
igmpInReportV2 Unsigned32,
igmpInLeave Unsigned32,
igmpInTotal Unsigned32,
igmpOutQuery Unsigned32,
igmpOutTotal Unsigned32,
igmpBadQuery Unsigned32,
igmpBadReportV1 Unsigned32,
igmpBadReportV2 Unsigned32,
igmpBadLeave Unsigned32,
igmpBadTotal Unsigned32
}
igmpInQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP Query messages received by the interface."
::= { igmpIntStatsEntry 1 }
igmpInReportV1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP version 1 Report messages received by the interface."
::= { igmpIntStatsEntry 2 }
igmpInReportV2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP version 2 Report messages received by the interface."
::= { igmpIntStatsEntry 3 }
igmpInLeave OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP Leave Group messages received by the interface."
::= { igmpIntStatsEntry 4 }
igmpInTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP messages received by the interface."
::= { igmpIntStatsEntry 5 }
igmpOutQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Query messages that were transmitted
by the switch over the interface."
::= { igmpIntStatsEntry 6 }
igmpOutTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP messages that were transmitted
by the switch over the interface."
::= { igmpIntStatsEntry 7 }
igmpBadQuery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP membership query messages with
errors that were received by the interface."
::= { igmpIntStatsEntry 8 }
igmpBadReportV1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP Version 1 membership report messages
with errors that were received by the interface."
::= { igmpIntStatsEntry 9 }
igmpBadReportV2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP Version 2 membership report messages
with errors that were received by the interface."
::= { igmpIntStatsEntry 10 }
igmpBadLeave OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IGMP Leave Group messages with errors
that were received by the interface."
::= { igmpIntStatsEntry 11 }
igmpBadTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP messages with errors that were
received by the interface.."
::= { igmpIntStatsEntry 12 }
--
-- The IGMP igmpIntMember Tables
--
igmpIntGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpIntGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the IP multicast groups of
which there are members on a particular interface."
::= { igmpIntMember 1 }
igmpIntGroupEntry OBJECT-TYPE
SYNTAX IgmpIntGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the igmpGroupTable."
INDEX { igmpInterface }
::= { igmpIntGroupTable 1 }
IgmpIntGroupEntry ::= SEQUENCE {
igmpIntGroupAddress IpAddress,
igmpLastHost IpAddress,
igmpRefreshTime Unsigned32
}
igmpIntGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains information."
::= { igmpIntGroupEntry 1 }
igmpLastHost OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last host reporting a membership.
If it is static, then 0.0.0.0 presents."
::= { igmpIntGroupEntry 2 }
igmpRefreshTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in seconds until the membership group is deleted
if another membership report is not received. A value of
0xffffffff means infinity."
::= { igmpIntGroupEntry 3 }
-- ===================
-- IGMP Snooping Group
-- ===================
igmpSnoopAdminInfo OBJECT IDENTIFIER ::= {igmpSnooping 1}
igmpSnoopAdminEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether IGMP Snooping is globally enabled."
::= { igmpSnoopAdminInfo 1 }
-- IGMP Snooping VLAN Table
igmpSnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the layer 2 interfaces
performing IGMP snooping."
::= { igmpSnooping 2 }
igmpSnoopVlanEntry OBJECT-TYPE
SYNTAX IgmpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the IGMP Snooping Vlan Table."
INDEX { igmpSnoopVID }
::= { igmpSnoopVlanTable 1 }
IgmpSnoopVlanEntry ::= SEQUENCE {
igmpSnoopVID INTEGER,
igmpSnoopVlanName DisplayString,
igmpSnoopFastLeave INTEGER,
igmpSnoopQuerySolicit TruthValue,
igmpSnoopStaticRouterPorts DisplayString
}
igmpSnoopVID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1 VLAN ID of the layer 2 interface performing
IGMP snooping."
::= { igmpSnoopVlanEntry 1 }
igmpSnoopVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the layer 2 interface performing IGMP snooping."
::= { igmpSnoopVlanEntry 2 }
igmpSnoopFastLeave OBJECT-TYPE
SYNTAX INTEGER {
off(0),
single(1),
multi(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether FastLeave is enabled, and operating
in Single-Host or Multi-Host mode."
::= { igmpSnoopVlanEntry 3 }
igmpSnoopQuerySolicit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether query solicitation is on"
::= { igmpSnoopVlanEntry 4 }
igmpSnoopStaticRouterPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the configured static multicast router ports."
::= { igmpSnoopVlanEntry 5 }
-- IGMP Snooping Group Table
igmpSnoopGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table of IGMP Groups snooped on a
layer 2 interface."
::= { igmpSnooping 3 }
igmpSnoopGroupEntry OBJECT-TYPE
SYNTAX IgmpSnoopGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) row in the IGMP Snooping Group table."
INDEX { igmpSnoopVID, igmpSnoopGroupAddress }
::= { igmpSnoopGroupTable 1 }
IgmpSnoopGroupEntry ::= SEQUENCE {
igmpSnoopGroupAddress IpAddress,
igmpSnoopGroupTimer Unsigned32
}
igmpSnoopGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Multicast Group IP Address detected on a
layer 2 interface."
::= { igmpSnoopGroupEntry 1 }
igmpSnoopGroupTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before the multicast group is
deleted from the layer 2 interface."
::= { igmpSnoopGroupEntry 2 }
-- IGMP Snooping Port Table
igmpSnoopPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) table of ports in a layer 2 interface
that are currently members of a multicast group."
::= { igmpSnooping 4 }
igmpSnoopPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) row in the IGMP Snooping Port Table."
INDEX { igmpSnoopVID, igmpSnoopGroupAddress, igmpSnoopPortNumber }
::= { igmpSnoopPortTable 1 }
IgmpSnoopPortEntry ::= SEQUENCE {
igmpSnoopPortNumber INTEGER,
igmpSnoopPortIsStatic TruthValue,
igmpSnoopPortTimer Unsigned32
}
igmpSnoopPortNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the number of a port in a multicast group."
::= { igmpSnoopPortEntry 1 }
igmpSnoopPortIsStatic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether a port has been administratively added
to a multicast group."
::= { igmpSnoopPortEntry 2 }
igmpSnoopPortTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time remaining before the port is removed."
::= { igmpSnoopPortEntry 3 }
-- IGMP Snooping Host Table
igmpSnoopHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) table of hosts receiving multicast data."
::= { igmpSnooping 5 }
igmpSnoopHostEntry OBJECT-TYPE
SYNTAX IgmpSnoopHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A (conceptual) row in the IGMP Snooping Host Table."
INDEX { igmpSnoopVID, igmpSnoopGroupAddress, igmpSnoopPortNumber, igmpSnoopHostMAC }
::= { igmpSnoopHostTable 1 }
IgmpSnoopHostEntry ::= SEQUENCE {
igmpSnoopHostMAC MacAddress,
igmpSnoopHostIpAddress IpAddress,
igmpSnoopHostTimer Unsigned32
}
igmpSnoopHostMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the Media Access Control Address of an IGMP Host."
::= { igmpSnoopHostEntry 1 }
igmpSnoopHostIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the Internet Protocol Address of an IGMP Host."
::= { igmpSnoopHostEntry 2 }
igmpSnoopHostTimer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time remaining before the host times out."
::= { igmpSnoopHostEntry 3 }
END