mibs/MIBS/allied/AT-PRI-MIB

252 lines
7.1 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- AT-ETH.MIB, Allied Telesis enterprise MIB: PRI module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
--
-- ============================================================================
AT-PRI-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString,
TruthValue
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
modules,
DisplayStringUnsized
FROM AT-SMI-MIB
;
pri MODULE-IDENTITY
LAST-UPDATED "200606281222Z"
ORGANIZATION "Allied Telesis, Inc"
CONTACT-INFO
"http://www.alliedtelesis.com"
DESCRIPTION
"This MIB file contains definitions of managed objects for the
PRI module. "
REVISION "200606281222Z"
DESCRIPTION
"Initial Revision"
::= { modules 42 }
-- The PRI module. This group consists of a table of PRI interfaces indexed
-- by ifIndex which provide MIB objects not given in a convenient form by
-- other standard MIBs. There is also a PRI channel MIB indexed by ifIndex
-- and channel index which gives information about the channels on the
-- interface.
-- The PRI interface table. Each entry is a PRI interface on the router.
priIntTable OBJECT-TYPE
SYNTAX SEQUENCE OF PriIntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of PRI interfaces."
::= { pri 1 }
priIntEntry OBJECT-TYPE
SYNTAX PriIntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry in the PRI interfaces table."
INDEX { priIntIndex }
::= { priIntTable 1 }
PriIntEntry ::=
SEQUENCE {
priIntIndex
INTEGER,
priIntBoardIndex
INTEGER,
priIntBoardPosition
INTEGER,
priIntMode
INTEGER,
priIntTdmChannelMap
INTEGER,
priIntIsdnChannelMap
INTEGER,
priIntType
INTEGER
}
priIntIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the PRI interface."
::= { priIntEntry 1 }
priIntBoardIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index in the arBoardTable of the board on which this PRI
interface resides."
::= { priIntEntry 2 }
priIntBoardPosition OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The position on this PRI interface's board of this PRI
interface."
::= { priIntEntry 3 }
priIntMode OBJECT-TYPE
SYNTAX INTEGER {
isdn (1),
tdm (2),
mixed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of operation of this PRI interface. The value isdn
means that the entire interface is operating as an ISDN
interface, the value tdm means that the entire interface is
operating as TDM groups and the value mixed means that some
channels in the interface are dedicated to ISDN and some to TDM
groups."
::= { priIntEntry 4 }
priIntTdmChannelMap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit map of the channels in the PRI interface which are
dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is
unused, 16 (E1) or 24 (T1) is the D channel. The map values are
2 to the power of the channel number."
::= { priIntEntry 5 }
priIntIsdnChannelMap OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit map of the channels in the PRI interface which are
dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is
unused, 16 (E1) or 24 (T1) is the D channel. The map values are
2 to the power of the channel number."
::= { priIntEntry 6 }
priIntType OBJECT-TYPE
SYNTAX INTEGER {
e1 (1),
t1 (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of primary rate interface. E1 has 30 B + D channel,
T1 has 23 B + D channel. If the value unknown is returned for
this object, the exact PRI type has not yet been determined."
::= { priIntEntry 7 }
-- The PRI channel table. Each entry is a channel on a PRI interface.
priChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF PriChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of channels on PRI interfaces."
::= { pri 2 }
priChanEntry OBJECT-TYPE
SYNTAX PriChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry in the PRI channels table."
INDEX { priChanIntIndex, priChanChannelIndex }
::= { priChanTable 1 }
PriChanEntry ::=
SEQUENCE {
priChanIntIndex
INTEGER,
priChanChannelIndex
INTEGER,
priChanMode
INTEGER,
priChanState
INTEGER
}
priChanIntIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of the PRI interface."
::= { priChanEntry 1 }
priChanChannelIndex OBJECT-TYPE
SYNTAX INTEGER (1..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channel index of the PRI channel. Valid channels have
indices from 1 to 31. The D channel on an E1 interface has
index 16, the D channel on a T1 interface has index 24."
::= { priChanEntry 2 }
priChanMode OBJECT-TYPE
SYNTAX INTEGER {
isdn (1),
tdm (2),
neither (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of this PRI channel. The value isdn means that the
channel is reserved for use in ISDN calls. The value tdm
means that the channel is reserved for use by TDM. For the D
channel, this object will usually have the value isdn. An
exception is if the interface is running common D channel mode
and the D channel is reserved for TDM."
::= { priChanEntry 3 }
priChanState OBJECT-TYPE
SYNTAX INTEGER {
inactive (1),
active (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this PRI channel. The value inactive means that
the channel does not currently have an active user, either an
ISDN call or an active TDM group. The value active means that
the channel is in use, either by an ISDN call or an active TDM
group."
::= { priChanEntry 4 }
END