david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/allied/AtiL2-MIB

3396 lines
112 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- Copyright 1999-2002 by Allied Telesyn International, Inc.
--
-- Name : ATIL2.MIB
-- Version : 2.3
-- Description : Private MIB for ATI Gigabit Uplink and 10/100M Switches.
-- : This MIB will be used in Windows and UNIX Environment.
-- History :
-- * 04-13-99 - Created.
-- * 04-03-02 (Praveen) - Renamed the MIB from fstswtch-mib to atil2-mib
-- * 04-17-02 (Praveen) - Added atiL2DeviceNumber. Extended atiL2deviceProductType
-- with values for AT-8326GB, AT-9410GB and AT-8350GB
-- * 04-18-02 (Praveen) - Added product OID entry for AT-8316F
-- * 04-26-02 (Praveen) - Changed atiL2DevicePortSpeed from read-write to read-only
-- * 08-23-02 (Praveen) - Added a new product specific group atiL2QOSConfigGroup,
-- applicable only to AT-8326GB, AT-9410GB and AT-8350GB.
-- Changed range of atiL2DevicePortSTPCost from 0..65535 to
-- 1..65535
AtiL2-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises,Counter,IpAddress,TimeTicks
FROM RFC1155-SMI
DisplayString
FROM RFC1213-MIB
TRAP-TYPE
FROM RFC-1215
OBJECT-TYPE
FROM RFC-1212;
--
-- General Definitions
--
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
BridgeId ::= OCTET STRING (SIZE (8)) -- the Bridge
-- Identifier as
-- used in the
-- Spanning Tree
-- Protocol to uniquely identify a bridge. Its first two
-- octets (in network byte order) contain a priority
-- value and its last 6 octets contain the MAC address
-- used to refer to a bridge in a unique fashion
-- (typically, the numerically smallest MAC address
-- of all ports on the bridge).
-- Several objects in this MIB module represent values of
-- timers used by the Spanning Tree Protocol. In this
-- MIB, these timers have values in units of hundreths of
-- a second (i.e. 1/100 secs).
-- These timers, when stored in a Spanning Tree Protocol's
-- BPDU, are in units of 1/256 seconds. Note, however,
-- that 802.1D-1990 specifies a settable granularity of
-- no more than 1 second for these timers. To avoid
-- ambiguity, a data type is defined here as a textual
-- convention and all representation of these timers
-- in this MIB module are defined using this data type. An
-- algorithm is also defined for converting between the
-- different units, to ensure a timer's value is not
-- distorted by multiple conversions.
-- The data type is:
Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
-- To convert a Timeout value into a value in units of
-- 1/256 seconds, the following algorithm should be used:
--
-- b = floor( (n * 256) / 100)
--
-- where:
-- floor = quotient [ignore remainder]
-- n is the value in 1/100 second units
-- b is the value in 1/256 second units
--
-- To convert the value from 1/256 second units back to
-- 1/100 seconds, the following algorithm should be used:
--
-- n = ceiling( (b * 100) / 256)
--
-- where:
-- ceiling = quotient [if remainder is 0], or
-- quotient + 1 [if remainder is non-zero]
-- n is the value in 1/100 second units
-- b is the value in 1/256 second units
--
-- Note: it is important that the arithmetic operations are
-- done in the order specified (i.e., multiply first, divide
-- second).
-- OID tree for Allied Telesyn Products and MIBs
alliedTelesyn OBJECT IDENTIFIER ::= { enterprises 207 }
atiProduct OBJECT IDENTIFIER ::= { alliedTelesyn 1 }
swhub OBJECT IDENTIFIER ::= { atiProduct 4 }
at-8324 OBJECT IDENTIFIER ::= { swhub 37 }
at-8124XL-V2 OBJECT IDENTIFIER ::= { swhub 52 }
at-8326GB OBJECT IDENTIFIER ::= { swhub 72 }
at-9410GB OBJECT IDENTIFIER ::= { swhub 73 }
at-8350GB OBJECT IDENTIFIER ::= { swhub 74 }
at-8316F OBJECT IDENTIFIER ::= { swhub 77 }
mibObject OBJECT IDENTIFIER ::= { alliedTelesyn 8 }
atiL2Mib OBJECT IDENTIFIER
-- LAST-UPDATED "9903200000Z"
-- ORGANIZATION "Allied Telesyn International."
-- CONTACT-INFO
-- "Allied Telesyn International Customer Service
--
-- Postal: 960 Stewart Drive,Suite B
-- Sunnyvale, CA 94086
-- USA
--
-- Email: support@alliedtelesyn.com
--
-- DESCRIPTION
-- "Private MIB for ATI Gigabit Uplink and 10/100M
-- Switches"
::= { mibObject 33}
-- Stack Wide Generic Groups
atiL2GlobalGroup OBJECT IDENTIFIER ::= {atiL2Mib 1 }
atiL2IpGroup OBJECT IDENTIFIER ::= {atiL2Mib 2}
atiL2NMGroup OBJECT IDENTIFIER ::= {atiL2Mib 3}
atiL2DHCPGroup OBJECT IDENTIFIER ::= {atiL2Mib 4}
-- Module Wide Generic Groups
atiL2DeviceGroup OBJECT IDENTIFIER ::= {atiL2Mib 5}
atiL2EthernetStatsGroup OBJECT IDENTIFIER ::= {atiL2Mib 6}
-- Port on a Module Groups
atiL2DevicePortConfigGroup OBJECT IDENTIFIER ::= {atiL2Mib 7}
atiL2VlanConfigGroup OBJECT IDENTIFIER ::= {atiL2Mib 8}
atiL2IfExt OBJECT IDENTIFIER ::= { atiL2Mib 9}
atiL2BridgeMib OBJECT IDENTIFIER ::= { atiL2Mib 10}
atiL2BrBase OBJECT IDENTIFIER ::= { atiL2BridgeMib 1 }
atiL2BrStp OBJECT IDENTIFIER ::= { atiL2BridgeMib 2 }
atiL2BrTp OBJECT IDENTIFIER ::= { atiL2BridgeMib 3 }
atiL2TrapAttrGroup OBJECT IDENTIFIER ::= { atiL2Mib 11}
-- Product specific groups
-- Applicable only to at-8326GB, at-9410GB and at-8350GB
atiL2QOSConfigGroup OBJECT IDENTIFIER ::= { atiL2Mib 12}
--
-- atiL2GlobalGroup
--
atiL2SwProduct OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the software product the device is
running."
::= { atiL2GlobalGroup 1 }
atiL2SwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Identifies the version number of the present
release."
::= { atiL2GlobalGroup 2 }
atiL2Reset OBJECT-TYPE
SYNTAX INTEGER {
switch-no-reset (1),
switch-reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Object use to reset all the Modules globally."
::= { atiL2GlobalGroup 3 }
atiL2MirroringSourceModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the mirror source module number. If the
atiL2EthConfigMirrorState is Enabled then the mirror
source module/port data gets routed to the mirror
destination module/port. Both transmitted and
recieved source activity is mirrored to the destination.
This arrangement is to put an RMON Probe on the
destination port to probe the traffic on the Source port.
This object will return a '0' if the MirrorState is not
enabled."
::= { atiL2GlobalGroup 4 }
atiL2MirroringSourcePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the Source port number for which there is
another mirror port.If the atiL2EthConfigMirrorState is
Enabled then the mirror portgets routed with all the
packets going in and out of Source port. This
arrangement is to put an RMON Probe on mirrored port to
Probe the traffic on the Source port. One of the port is
dedicated to this so that for any port as source port,
this dedicated port can be a mirrored port. This object
will return a '0' if the MirrorState is not enabled."
::= { atiL2GlobalGroup 5 }
atiL2MirroringDestinationModule OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the mirror destination module number. If the
atiL2EthConfigMirrorState is Enabled then the mirror
source module/port data gets routed to the mirror
destination module/port. Both transmitted and recieved
source activity is mirrored to the destination. This
arrangement is to put an RMON Probe on the destination
port to probe the traffic on the Source port. This
object will return a '0' if the MirrorState is not
enabled."
::= { atiL2GlobalGroup 6 }
atiL2MirroringDestinationPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the Destination port number for which there is
another mirror port.If the atiL2EthConfigMirrorState is
Enabled then,the mirror portgets routed with all the
packets going in and out of Destination port. This
arrangement is to put an RMON Probe on mirrored port to
Probe the traffic on the Destination port. One of the
port is dedicated to this so that for any port as
destination port, this dedicated port can be a mirrored
port. This object will return a '0' if the MirrorState
is not enabled."
::= { atiL2GlobalGroup 7 }
atiL2MirrorState OBJECT-TYPE
SYNTAX INTEGER {
receive-and-transmit(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" if the state of Mirroring is enabled by selecting one
of the two values , then the Mirroring explained above
works. If disabled, port operation works normally. No
Traffic gets routed from MirroringSourcePort to
Destination Mirrored Port."
::= { atiL2GlobalGroup 8 }
atiL2IGMPState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
configure IGMP"
::= { atiL2GlobalGroup 9 }
atiL2DeviceNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of devices in the stack."
::= { atiL2GlobalGroup 10 }
--
-- atiL2IpGroup
--
-- The Ip Sys group contains IP Address which is current and configured
-- IP address which gets effective when reset. Also, subnet mask and
-- Default Gateway address.
atiL2CurrentIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Current IP address is the one which is currently
used and is obtained dynamically through one of the
protocols interaction.( DHCP or Bootp.) This address
is NULL if the Address is Statically configured."
::= { atiL2IpGroup 1 }
atiL2ConfiguredIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Configured IP address of the device. This is
the address configured through Network or Local Omega. "
::= { atiL2IpGroup 2 }
atiL2ConfiguredSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Configured Subnet Mask of the device."
::= { atiL2IpGroup 3 }
atiL2ConfiguredRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Configured Gateway/Router address of the device"
::= { atiL2IpGroup 4 }
atiL2IPAddressStatus OBJECT-TYPE
SYNTAX INTEGER {
from-dhcp(1),
from-bootp(2),
from-psuedoip(3),
from-Omega(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The IP Address can be obtained/configured by any of
the above different ways. This object specifies how
IP address currently on the switch Box, was
configured/obtained."
::= { atiL2IpGroup 5 }
atiL2DNServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Configured DNS Server address of the device"
::= { atiL2IpGroup 6 }
atiL2DefaultDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This Object defines the Default Domain where this
switch can be belong to."
::= { atiL2IpGroup 7 }
--
-- atiL2NMGroup (SNMP NetManagemnt related MIB object)
--
atiL2NwMgrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2NwMgrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of SNMP Trap Manager stations Entries.
The number of entries is given by the
switchNwMgrTotal mib object."
::= { atiL2NMGroup 1 }
atiL2NwMgrEntry OBJECT-TYPE
SYNTAX AtiL2NwMgrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Trap receipt Manager Entry containing ipaddress of
the configured NMS's to which Traps are sent."
INDEX { atiL2NwMgrIndex }
::= { atiL2NwMgrTable 1 }
AtiL2NwMgrEntry ::=
SEQUENCE {
atiL2NwMgrIndex INTEGER,
atiL2NwMgrIpAddr IpAddress
}
atiL2NwMgrIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Index of the Managers Ip address."
::= { atiL2NwMgrEntry 1 }
atiL2NwMgrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Address of the NMS host configured."
::= { atiL2NwMgrEntry 2 }
--
-- atiL2DHCPGroup
--
atiL2DHCPSysGroup OBJECT IDENTIFIER ::= {atiL2DHCPGroup 1 }
atiL2DHCPTimerGroup OBJECT IDENTIFIER ::= {atiL2DHCPGroup 2 }
--atiL2DHCPCurrentDHCPServerAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The IP address of the DHCP server selected by the end of
-- DHCP Protocols 'REQUEST STATE' .DHCP client selects the
-- server from the responses ( one or more ) in the
-- SELECTSTATE and sends out a DHCPREQUEST to confirm the
-- DHCP server selected."
-- ::= {atiL2DHCPSysGroup 1}
atiL2DHCPCurrentDHCPClientAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current IP address of the client. To start with,it might
be null. This is filled by the server when sending a
DHCPOFFER and the client uses the most comfortable offer
from offers sent by different DHCP servers. A DHCPREQUEST
packet is sent with the Client address agreed upon to the
selected server ( Broadcast). Server Acks back this packet
which is where Client/Server moves to the Bound state. Once
reached into Bound state, the client address is made the
official address on the client."
::= {atiL2DHCPSysGroup 1}
atiL2DHCPSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When the client/server reaches the BOUND state, this is
one of the parameters set by the server."
::= {atiL2DHCPSysGroup 2}
atiL2DHCPCurrentRelayAgentAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the DHCP relay Agent on the same subnet.
Normally there will be no DHCP server on each of the
subnet and this Relay Agent will act in sending server
across the subnets. There might not be any relay agent.
This depends on the network Toplogy like where is the
DHCP server and DHCP client."
::= {atiL2DHCPSysGroup 3}
atiL2DHCPNextDHCPServerAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the next DHCP server to be used during
bootstrap. This address is sent by the DHCP server in
the messages DHCPOFFER, DHCPACK,DHCPNACK."
::= {atiL2DHCPSysGroup 4}
atiL2DHCPLeaseTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When the client/server reaches the BOUND state, this is
one of the parameters set by the server. The lease time
period in seconds for the DHCP client for using IP address
on lease from the server. At the end of 50% of this timer
a renewal request is sent by the client . This is the next
Object atiL2DHCPReacquisitionTimer."
::= {atiL2DHCPTimerGroup 1}
atiL2DHCPReacquisitionTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When the client/server reaches the BOUND state, this is
one of the parameters set by the server.
Mentioned in RFC2131 4.4.5 as T1, this renewal time
period in secs for the DHCP client is for using IP address
on lease from the server Once the Reacquisition Timer
period in secs after the lease period is reached,
the client sends a DHCPREQUEST to the DHCP server
requesting for renewal of the lease. Default would be 50%
of the Lease timer which is represeneted by the above
object. The client moves from BOUND to RENEW state once
the DHCPREQUEST is sent after time T1 secs is passed from
the start of to release time. T1 is always less than T2
( see below for 'T2') which is less than the lease Timer
period."
::= {atiL2DHCPTimerGroup 2}
atiL2DHCPExpirationTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When the client/server reaches the BOUND state, this is
one of the parameters set by the server.
Mentioned in RFC2131 4.4.5 as T2,this Expiration time
period in secs is the time period in secs during which
DHCP has gone through the BOUND->RENEWAL state. After T1
secs and when the state machine reaches T2 secs,
( T1 < T2 < lease period), DHCP client sends another
DHCPREQUEST to the server asking the server to renew the
lease for the IP parameters. By default it would be 87.5%
of the Lease timer .If there is DHCPACK then the DHCP
client moves from REBIND to BOUND. Else it moves to INIT
state where it starts all over again sending a request for
DHCPDISCOVER."
::= {atiL2DHCPTimerGroup 3 }
--
-- atiL2DeviceGroup
--
atiL2deviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2deviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table contains the mapping of all devices
in the chassis."
::= { atiL2DeviceGroup 1}
atiL2deviceEntry OBJECT-TYPE
SYNTAX AtiL2deviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The device entry in the DeviceTable."
INDEX { atiL2deviceIndex }
::= { atiL2deviceTable 1 }
AtiL2deviceEntry ::=
SEQUENCE {
atiL2deviceIndex
INTEGER,
atiL2deviceDescr
DisplayString,
atiL2deviceProductType
INTEGER,
atiL2devicePortCount
INTEGER,
atiL2deviceSecurityConfig
INTEGER,
atiL2deviceSecurityAction
INTEGER,
atiL2deviceDebugAvailableBytes
INTEGER,
atiL2deviceMDA1Type
INTEGER,
atiL2deviceMDA2Type
INTEGER,
atiL2deviceReset
INTEGER
}
atiL2deviceIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Slot number in the chassis where the device is
installed."
::= { atiL2deviceEntry 2 }
atiL2deviceDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual description of the device."
::= { atiL2deviceEntry 3 }
atiL2deviceProductType OBJECT-TYPE
SYNTAX INTEGER {
at-8324(1),
at-8316F(2),
at-8124XL-V2(3),
at-8326GB(4),
at-9410GB(5),
at-8350GB(6),
other(20)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object will return Product Type."
::= { atiL2deviceEntry 4 }
atiL2devicePortCount OBJECT-TYPE
SYNTAX INTEGER (1..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports contained within the device.
Valid range is 1-32. Within each device, the
ports are uniquely numbered in the range from
1 to maxportCapacity."
::= { atiL2deviceEntry 5}
atiL2deviceSecurityConfig OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled-with-learning-locked(2),
limited-enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Security feature configuration Object.The Security
disable would let the device carry on the
learn-new-address-as-it-comes-in mode as usual.When
security is enabled-with-learning-locked, the learning
of new address is stopped and the addresses locked in
the device is used as the security Database. If an
address comes in which is not present in the Device
Security Database, then any of the atiL2SecurityAction
Configured is triggered. When limited-enabled is
selected, a per-port atiL2PortSecurityNumberOfAddresses
specify the max number of MACs to be learned."
::= { atiL2deviceEntry 6 }
atiL2deviceSecurityAction OBJECT-TYPE
SYNTAX INTEGER {
send-trap-only(1),
disable-port-only(2),
disable-port-and-send-trap(3),
do-nothing(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Security Action to be carried when the
atiL2SecurityConfig is enabled-with-learning-locked
or limted-enabled."
::= { atiL2deviceEntry 7 }
atiL2deviceDebugAvailableBytes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is strictly for Debug reason and this object
should not be believed as the correct number."
::= { atiL2deviceEntry 8}
atiL2deviceMDA1Type OBJECT-TYPE
SYNTAX INTEGER {
ten-100rj45-mii(1),
hundredfiber-mii(2),
oneGb-rj45(3),
oneGb-Fiber(4),
none(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object returns the MDA type of the Uplink
port. The values of 1 and 2 are the only one
present in 81XX. 82XX has all the values
supported. This object returns the MDA type of
the Uplink Port named 'A'. It returns 'none'
if a 'A' MDA slot is not installed."
::= { atiL2deviceEntry 9 }
atiL2deviceMDA2Type OBJECT-TYPE
SYNTAX INTEGER {
ten-100rj45-mii(1),
hundredfiber-mii(2),
oneGb-rj45(3),
oneGb-Fiber(4),
none(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object is supported in 81XX 82XX product
lines. The values of 1 and 2 are the only one
present in 81XX. 82XX has all the values
supported. This object returns the MDA type of
the Uplink Port named 'B'. It returns 'none'
if a 'B' MDA slot is not installed."
::= { atiL2deviceEntry 10 }
atiL2deviceReset OBJECT-TYPE
SYNTAX INTEGER {
switch-no-reset (1),
switch-reset (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this object to 'switch-reset' will
cause the switch to perform a hardware reset
within approximately 4-6 seconds. Setting this
object to 'switch-no-reset will have no effect.
The value 'no-reset' will be returned whenever
this object is retrieved."
::= { atiL2deviceEntry 11 }
--
-- atiL2EthernetStatsGroup (Ethernet Monitor Group)
--
-- The Monitor group contains statistics measured
-- per module identified by the module Id.
-- These statistics take the form of free running counters that start
-- from zero.
atiL2EthMonStatsGroup OBJECT IDENTIFIER ::= { atiL2EthernetStatsGroup 1}
atiL2EthErrStatsGroup OBJECT IDENTIFIER ::= { atiL2EthernetStatsGroup 2}
atiL2EthMonStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2EthMonStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of statistics entries."
::= { atiL2EthMonStatsGroup 1 }
atiL2EthMonStatsEntry OBJECT-TYPE
SYNTAX AtiL2EthMonStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of statistics kept for a particular port."
INDEX {atiL2EthMonModuleId }
::= { atiL2EthMonStatsTable 1 }
AtiL2EthMonStatsEntry ::=
SEQUENCE {
atiL2EthMonModuleId
INTEGER,
atiL2EthMonRxGoodFrames
Counter,
atiL2EthMonTxGoodFrames
Counter,
atiL2EthMonTxTotalBytes
Counter ,
atiL2EthMonTxDeferred
Counter ,
atiL2EthMonTxCollisions
Counter,
atiL2EthMonTxBroadcastFrames
Counter,
atiL2EthMonTxMulticastFrames
Counter,
atiL2EthMonRxOverruns
Counter
}
atiL2EthMonModuleId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object Identifies the Module Id for which the
Statistics is collected."
::= { atiL2EthMonStatsEntry 1 }
atiL2EthMonRxGoodFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Good Frames received on this
module."
::= { atiL2EthMonStatsEntry 2 }
atiL2EthMonTxGoodFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Good Frames Transmitted by this
module."
::= { atiL2EthMonStatsEntry 3 }
atiL2EthMonTxTotalBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Bytes transmitted from this
module."
::= { atiL2EthMonStatsEntry 4 }
atiL2EthMonTxDeferred OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is the count of first time Transmission attempt
which failed on an interface due to medium being busy."
::= { atiL2EthMonStatsEntry 5 }
atiL2EthMonTxCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of collisions while switching on an
interface."
::= { atiL2EthMonStatsEntry 6 }
atiL2EthMonTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Transmit Broadcast Frames while
switching on an interface."
::= { atiL2EthMonStatsEntry 7 }
atiL2EthMonTxMulticastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Transmit Multicast while switching
on an interface."
::= { atiL2EthMonStatsEntry 8 }
atiL2EthMonRxOverruns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Recieved Overrun Frames while
switching on an interface."
::= { atiL2EthMonStatsEntry 9 }
--
-- The Following is a Per Port MonStats Table.
--
atiL2EthPortMonStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2EthPortMonStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of statistics entries per Port on a Module."
::= { atiL2EthMonStatsGroup 2 }
atiL2EthPortMonStatsEntry OBJECT-TYPE
SYNTAX AtiL2EthPortMonStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of statistics kept for a particular port."
INDEX {atiL2EthPortMonModuleId,atiL2EthPortMonPortId}
::= { atiL2EthPortMonStatsTable 1 }
AtiL2EthPortMonStatsEntry ::=
SEQUENCE {
atiL2EthPortMonModuleId
INTEGER,
atiL2EthPortMonPortId
INTEGER,
atiL2EthPortMonRxGoodFrames
Counter,
atiL2EthPortMonTxGoodFrames
Counter,
atiL2EthPortMonTxTotalBytes
Counter ,
atiL2EthPortMonTxDeferred
Counter ,
atiL2EthPortMonTxCollisions
Counter,
atiL2EthPortMonTxBroadcastFrames
Counter,
atiL2EthPortMonTxMulticastFrames
Counter,
atiL2EthPortMonRxOverruns
Counter
}
atiL2EthPortMonModuleId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object Identifies the Module Id for which the
Statistics is collected."
::= { atiL2EthPortMonStatsEntry 1 }
atiL2EthPortMonPortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object Identifies the Port on the Module
recognised by EthMonPortModuleId for which the
Statistics is collected."
::= { atiL2EthPortMonStatsEntry 2 }
atiL2EthPortMonRxGoodFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Good Frames received on this module."
::= { atiL2EthPortMonStatsEntry 3 }
atiL2EthPortMonTxGoodFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Good Frames Transmitted by this
module."
::= { atiL2EthPortMonStatsEntry 4 }
atiL2EthPortMonTxTotalBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Bytes transmitted from this module."
::= { atiL2EthPortMonStatsEntry 5 }
atiL2EthPortMonTxDeferred OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is the count of first time Transmission attempt
which failed on an interface due to medium being busy."
::= { atiL2EthPortMonStatsEntry 6 }
atiL2EthPortMonTxCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of collisions while switching on an
interface."
::= { atiL2EthPortMonStatsEntry 7 }
atiL2EthPortMonTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Transmit Broadcast Frames on this
port and Module while switching on an interface."
::= { atiL2EthPortMonStatsEntry 8 }
atiL2EthPortMonTxMulticastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Transmit Multicast on this port
and Module while switching on an interface."
::= { atiL2EthPortMonStatsEntry 9 }
atiL2EthPortMonRxOverruns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Recieved Overrun Frames on this
port and Module while switching on an interface."
::= { atiL2EthPortMonStatsEntry 10 }
--
-- The Ethernet Error Statistics
--
-- The Ethernet Error Statistics group contains certain errors
-- measured by the switch. These statistics take the form of
-- free running counters that start from zero.
--
atiL2EthErrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2EthErrStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of statistics entries."
::= { atiL2EthErrStatsGroup 1 }
atiL2EthErrorStatsEntry OBJECT-TYPE
SYNTAX AtiL2EthErrStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of statistics kept for a particular port."
INDEX {atiL2EthErrModuleId }
::= { atiL2EthErrStatsTable 1 }
AtiL2EthErrStatsEntry ::=
SEQUENCE {
atiL2EthErrModuleId
INTEGER,
atiL2EthErrorCRC
Counter,
atiL2EthErrorAlignment
Counter,
atiL2EthErrorRxBadFrames
Counter ,
atiL2EthErrorLateCollisions
Counter,
atiL2EthErrorTxTotal
Counter
}
atiL2EthErrModuleId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object Identifies the Module Id for which the
Statistics is collected."
::= { atiL2EthErrorStatsEntry 1 }
atiL2EthErrorCRC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of CRC errors on received packets."
::= { atiL2EthErrorStatsEntry 2 }
atiL2EthErrorAlignment OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received that has alignment
errors."
::= { atiL2EthErrorStatsEntry 3 }
atiL2EthErrorRxBadFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter is incremented when a bad frame was
received."
::= { atiL2EthErrorStatsEntry 4 }
atiL2EthErrorLateCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object counts the number of times the collison was
detected in the port."
::= { atiL2EthErrorStatsEntry 5 }
atiL2EthErrorTxTotal OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of error resulted from transfer operations."
::= { atiL2EthErrorStatsEntry 6 }
--
-- EthErrStats per Port.
--
atiL2EthPortErrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2EthPortErrStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of statistics entries."
::= { atiL2EthErrStatsGroup 2 }
atiL2EthPortErrorStatsEntry OBJECT-TYPE
SYNTAX AtiL2EthPortErrStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of statistics kept for a particular port."
INDEX {atiL2EthPortErrModuleId, atiL2EthPortErrPortId}
::= { atiL2EthPortErrStatsTable 1 }
AtiL2EthPortErrStatsEntry ::=
SEQUENCE {
atiL2EthPortErrModuleId
INTEGER,
atiL2EthPortErrPortId
INTEGER,
atiL2EthPortErrorCRC
Counter,
atiL2EthPortErrorAlignment
Counter,
atiL2EthPortErrorRxBadFrames
Counter ,
atiL2EthPortErrorLateCollisions
Counter,
atiL2EthPortErrorTxTotal
Counter
}
atiL2EthPortErrModuleId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object Identifies the Module Id for which the
Statistics is collected."
::= { atiL2EthPortErrorStatsEntry 1 }
atiL2EthPortErrPortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This Object Identifies the Port on the Module
recognised by the above Object for which the
Statistics is collected."
::= { atiL2EthPortErrorStatsEntry 2 }
atiL2EthPortErrorCRC OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of CRC errors on received packets."
::= { atiL2EthPortErrorStatsEntry 3 }
atiL2EthPortErrorAlignment OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received that has alignment
errors."
::= { atiL2EthPortErrorStatsEntry 4 }
atiL2EthPortErrorRxBadFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter is incremented when a bad frame was
received."
::= { atiL2EthPortErrorStatsEntry 5 }
atiL2EthPortErrorLateCollisions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object counts the number of times the collison was
detected in the port."
::= { atiL2EthPortErrorStatsEntry 6 }
atiL2EthPortErrorTxTotal OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of error resulted from transfer operations."
::= { atiL2EthPortErrorStatsEntry 7 }
--
-- atiL2DevicePortConfigGroup
--
atiL2DevicePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2DevicePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of basic port configuration information."
::= { atiL2DevicePortConfigGroup 1 }
atiL2DevicePortEntry OBJECT-TYPE
SYNTAX AtiL2DevicePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the port config table."
INDEX { atiL2DeviceId,atiL2DevicePortNumber }
::= { atiL2DevicePortTable 1 }
AtiL2DevicePortEntry ::=
SEQUENCE {
atiL2DeviceId
INTEGER,
atiL2DevicePortNumber
INTEGER,
atiL2DevicePortName
DisplayString,
atiL2DevicePortAutosenseOrHalfDuplex
INTEGER,
atiL2DevicePortLinkState
INTEGER,
atiL2DevicePortDuplexStatus
INTEGER ,
atiL2DevicePortSpeed
INTEGER,
atiL2DevicePortState
INTEGER,
atiL2DevicePortTransmitPacingConfig
INTEGER,
atiL2DevicePortSTPConfig
INTEGER,
atiL2DevicePortBridgeid
INTEGER,
atiL2DevicePortSTPCost
INTEGER,
atiL2DevicePortSTPPriority
INTEGER,
atiL2DevicePortFlowControlEnable
INTEGER,
atiL2DevicePortBackPressureEnable
INTEGER,
atiL2DevicePortVlanTagPriorityConfig
INTEGER,
atiL2DevicePortQOSPriorityConfig
INTEGER
}
atiL2DeviceId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the Module Id of the switch
Stack."
::= { atiL2DevicePortEntry 1 }
atiL2DevicePortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the Port on atiL2ModuleId of
the switch Stack."
::= { atiL2DevicePortEntry 2 }
atiL2DevicePortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute associates a user defined string name
with the port."
::= { atiL2DevicePortEntry 3 }
atiL2DevicePortAutosenseOrHalfDuplex OBJECT-TYPE
SYNTAX INTEGER {
portAutoSense(1),
forceHalfDuplex-10M(2),
forceHalfDuplex-100M(3),
forceFullDuplex-10M(4),
forceFullDuplex-100M(5),
forceHalfDuplex-1G(6),
forceFullDuplex-1G(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
configure whether this port can Autosense or Force
the Half Duplex or Full Duplex on different Port
Speeds."
::= { atiL2DevicePortEntry 4 }
atiL2DevicePortLinkState OBJECT-TYPE
SYNTAX INTEGER {
online(1),
offline(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
read the status of link state on this port."
::= { atiL2DevicePortEntry 5 }
atiL2DevicePortDuplexStatus OBJECT-TYPE
SYNTAX INTEGER {
fullDuplex(1),
halfDuplex(2),
autosense(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
read the status of Duplex on this port."
::= { atiL2DevicePortEntry 6 }
atiL2DevicePortSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBits(1),
hundredMBits(2),
gigaBits(3),
unknown(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
read or write the speed of this port. This Object
is valid only for 10/100Mbits and gigaBits ports.
The only gigabit port that can be set is that of
AT-A14 and it's values can be either 2 or 3."
::= { atiL2DevicePortEntry 7 }
atiL2DevicePortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
blocking(3),
listening(4),
learning(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
disable or enable communications on this port.It also
responds with the status of the port .Except enabled(1) and
disabled(2), all values are read-only status."
::= { atiL2DevicePortEntry 8 }
atiL2DevicePortTransmitPacingConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object is supported on at36XX product line Only.
This attribute allows the transmit Pacing to be
enabled or disabled."
::= { atiL2DevicePortEntry 9 }
atiL2DevicePortSTPConfig OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows a bridging Mode to be configured
with either Spanning Tree enabled or disabled. When
Spanning tree is enabled, make sure that this port is
belonging to a valid Bridge_id. Spanning Tree is
enabled only when a valid Bridge_id is set."
::= { atiL2DevicePortEntry 10}
atiL2DevicePortBridgeid OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Bridge to which this port belongs to."
::= { atiL2DevicePortEntry 11 }
atiL2DevicePortSTPCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Cost of the Spanning Tree Protocol.This object
is valid only when STP is enabled."
::= { atiL2DevicePortEntry 12 }
atiL2DevicePortSTPPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Priority of the spanning Tree Protocol.
This object is valid when STP is enabled."
::= { atiL2DevicePortEntry 13 }
atiL2DevicePortFlowControlEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This per-port attribute describes whether the port
identified has flow Control Enabled or not. Flow
Control on Full Duplex and Half Duplex is detected
and automatically, flow control accordingly is
taken care of. By Default, Flow Control is Disabled."
::= { atiL2DevicePortEntry 14 }
atiL2DevicePortBackPressureEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This per-port attribute describes whether the port
identified has Back Pressure Enabled or not. By
Default, Back Pressure is Disabled."
::= { atiL2DevicePortEntry 15 }
atiL2DevicePortVlanTagPriorityConfig OBJECT-TYPE
SYNTAX INTEGER {
use-vlan-priority(1),
override-vlan-priority(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This per-port attribute allows the configuration of
the Tag Priority to be Override or Use the Tag
Priority. By Default, all ports use Vlan Tag priority."
::= { atiL2DevicePortEntry 16 }
atiL2DevicePortQOSPriorityConfig OBJECT-TYPE
SYNTAX INTEGER {
high-priority(1),
normal-priority(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This per-port attribute is applicable only to
at-8324, at-8124XL-V2 and at-8316 and it allows for
the configuration of the Priority of the port to be
high or Low. In a switch environment, Ports with high
Priority and traffic from and to the ports get more
priority when compared with those with normal
priority. By Default, all ports have Normal Priority."
::= { atiL2DevicePortEntry 17 }
--atiL2DevicePortSecurityNumberOfAddresses OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "This object configures the Max number of addresses
-- at an instance to be learnt by the device. If the
-- learnt addresses number is above this number, then
-- the atiL2SecurityAction is triggered . when the
-- number of learnt addresses exceeds this number ,the
-- the atiL2SecurityAction is triggered only if
-- atiL2SecurityConfig is set to limited-enalbled. Else
-- nothing is triggered."
-- ::= { atiL2DevicePortEntry 16 }
--
-- atiL2VlanConfigGroup
--
atiL2BasicVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BasicVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Virtual LAN configured."
::= { atiL2VlanConfigGroup 1 }
atiL2BasicVlanEntry OBJECT-TYPE
SYNTAX AtiL2BasicVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing VLAN information."
INDEX { atiL2BeVlanIndex }
::= { atiL2BasicVlanTable 1 }
AtiL2BasicVlanEntry ::=
SEQUENCE {
atiL2BeVlanIndex
INTEGER,
atiL2BeVlanName
DisplayString,
atiL2BeVlanTagId
INTEGER,
atiL2BeVlanModule1UntaggedPorts
DisplayString,
atiL2BeVlanModule1TaggedPorts
DisplayString,
atiL2BeVlanModule2UntaggedPorts
DisplayString,
atiL2BeVlanModule2TaggedPorts
DisplayString,
atiL2BeVlanModule3UntaggedPorts
DisplayString,
atiL2BeVlanModule3TaggedPorts
DisplayString,
atiL2BeVlanModule4UntaggedPorts
DisplayString,
atiL2BeVlanModule4TaggedPorts
DisplayString,
atiL2BeVlanModule5UntaggedPorts
DisplayString,
atiL2BeVlanModule5TaggedPorts
DisplayString,
atiL2BeVlanModule6UntaggedPorts
DisplayString,
atiL2BeVlanModule6TaggedPorts
DisplayString,
atiL2BeVlanModule7UntaggedPorts
DisplayString,
atiL2BeVlanModule7TaggedPorts
DisplayString,
atiL2BeVlanModule8UntaggedPorts
DisplayString,
atiL2BeVlanModule8TaggedPorts
DisplayString,
atiL2BeVlanRowStatus
INTEGER
}
atiL2BeVlanIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the VLAN."
::= { atiL2BasicVlanEntry 1 }
atiL2BeVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute associates a user defined string with
the Virtual LAN. To configure a new VLAN, do 'set'
operation on this object with the VLAN name. To delete
a VLAN, do 'set' operation with string '*<module_num>',
where <module_num> is the module number (1..8) from
which the delete request is being sent. If a vlan is
being created or modified, before configuring any of
the objects in this row, set atiL2VlanStatus to
'under-construction' and once configured with all the
information, set the same object to operational. This
step is not required when deleting a vlan."
::= { atiL2BasicVlanEntry 2 }
atiL2BeVlanTagId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object configures the VId in the Tag Information header
in accordance with 802.1q spec.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 3 }
atiL2BeVlanModule1UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module that
participate in the Vlan with the atiL2BeVlanName. The Format
of the input string would be like '1,2,5,7,12..15,18-22,26'.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 4 }
atiL2BeVlanModule1TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is
not set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 5 }
atiL2BeVlanModule2UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is
not set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 6 }
atiL2BeVlanModule2TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is
not set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 7 }
atiL2BeVlanModule3UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 8 }
atiL2BeVlanModule3TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 9 }
atiL2BeVlanModule4UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 10 }
atiL2BeVlanModule4TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 11 }
atiL2BeVlanModule5UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 12 }
atiL2BeVlanModule5TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 13 }
atiL2BeVlanModule6UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 14 }
atiL2BeVlanModule6TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 15 }
atiL2BeVlanModule7UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 16 }
atiL2BeVlanModule7TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 17 }
atiL2BeVlanModule8UntaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 18 }
atiL2BeVlanModule8TaggedPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational."
::= { atiL2BasicVlanEntry 19 }
atiL2BeVlanRowStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
operational(2),
under-construction(3),
not-operational(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create or modify a vlan. The user
should first set this object to under-construction. After
the vlan name, the tag Id and the ports belonging to the vlan
are configured/modified, this object should be set to
operational. If it is not set to operational, the whole row
will be lost and the vlan will not be configured in the switch."
::= { atiL2BasicVlanEntry 20 }
--
-- Port2VlanTable.
--
atiL2Port2VlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2Port2VlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of per port Virtual LAN configuration."
::= { atiL2VlanConfigGroup 2 }
atiL2Port2VlanEntry OBJECT-TYPE
SYNTAX AtiL2Port2VlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing per port VLAN
information."
INDEX {atiL2PvModuleId, atiL2PvPortNumber }
::= { atiL2Port2VlanTable 1 }
AtiL2Port2VlanEntry ::=
SEQUENCE {
atiL2PvModuleId
INTEGER,
atiL2PvPortNumber
INTEGER,
atiL2PvVlanName
DisplayString
}
atiL2PvModuleId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the Module Id on the switching
Stack."
::= { atiL2Port2VlanEntry 1 }
atiL2PvPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the port on the Module
atiL2PvModuleId ."
::= { atiL2Port2VlanEntry 2 }
atiL2PvVlanName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute associates a user defined string with
the Virtual LAN. This Object is the same as atiL2BeVlanName.
Please make sure to give the same string as atiL2BeVlanName."
::= { atiL2Port2VlanEntry 3 }
--
-- atiL2IfExt Group
--
atiL2IfExtensions OBJECT IDENTIFIER ::= { atiL2IfExt 1 }
atiIfExtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiIfExtnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of interface entries. The number of entries is
given by the value of ifNumber."
::= { atiL2IfExtensions 1 }
atiIfExtnEntry OBJECT-TYPE
SYNTAX AtiIfExtnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An interface entry containing objects at the
subnetwork layer and below for a particular interface."
INDEX { atiIfExtnIndex }
::= { atiIfExtnTable 1 }
AtiIfExtnEntry ::= SEQUENCE {
atiIfExtnIndex
INTEGER,
atiIfExtnModuleId
INTEGER,
atiIfExtnPort
INTEGER
}
atiIfExtnIndex OBJECT-TYPE
SYNTAX INTEGER(1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each interface corresponding to the
ifIndex value for the same interface."
::= { atiIfExtnEntry 1 }
atiIfExtnModuleId OBJECT-TYPE
SYNTAX INTEGER(1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unit number associated with this particular
interface."
::= { atiIfExtnEntry 2 }
atiIfExtnPort OBJECT-TYPE
SYNTAX INTEGER(1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number within a unit or slot."
::= { atiIfExtnEntry 3 }
--
-- atiL2BridgeMib
--
-- the atiL2BrBase Table
atiL2BrBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrBaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of basic bridge information."
::= { atiL2BrBase 1 }
atiL2BrBaseEntry OBJECT-TYPE
SYNTAX AtiL2BrBaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atiL2BrBaseTable."
INDEX { atiL2BrBaseLanId }
::= { atiL2BrBaseTable 1 }
AtiL2BrBaseEntry ::=
SEQUENCE {
atiL2BrBaseLanId
INTEGER,
atiL2BrBaseBridgeAddress
MacAddress,
atiL2BrBaseNumPorts
INTEGER,
atiL2BrBaseType
INTEGER
}
atiL2BrBaseLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrBaseEntry 1 }
atiL2BrBaseBridgeAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with atiL2BrStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol."
REFERENCE
"IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
::= { atiL2BrBaseEntry 2 }
atiL2BrBaseNumPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports controlled by this bridging
entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.4.1.1.3"
::= { atiL2BrBaseEntry 3 }
atiL2BrBaseType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
transparent-only(2),
sourceroute-only(3),
srt(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type."
::= { atiL2BrBaseEntry 4 }
-- The Generic Bridge Port Table
atiL2BrBasePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrBasePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included."
::= { atiL2BrBase 4 }
atiL2BrBasePortEntry OBJECT-TYPE
SYNTAX AtiL2BrBasePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for each port of the
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
INDEX { atiL2BrBasePortLanId, atiL2BrBasePort }
::= { atiL2BrBasePortTable 1 }
AtiL2BrBasePortEntry ::=
SEQUENCE {
atiL2BrBasePortLanId
INTEGER,
atiL2BrBasePort
INTEGER,
atiL2BrBasePortIfIndex
INTEGER,
atiL2BrBasePortCircuit
OBJECT IDENTIFIER,
atiL2BrBasePortDelayExceededDiscards
Counter,
atiL2BrBasePortMtuExceededDiscards
Counter
}
atiL2BrBasePortLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrBasePortEntry 1 }
atiL2BrBasePort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains bridge management information."
::= { atiL2BrBasePortEntry 2 }
atiL2BrBasePortIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port."
::= { atiL2BrBasePortEntry 3 }
atiL2BrBasePortCircuit OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For a port which (potentially) has the same value
of atiL2BrBasePortIfIndex as another port on the
same bridge, this object contains the name of an
object instance unique to this port. For example,
in the case where multiple ports correspond one-
to-one with multiple X.25 virtual circuits, this
value might identify an (e.g., the first) object
instance associated with the X.25 virtual circuit
corresponding to this port.
For a port which has a unique value of
atiL2BrBasePortIfIndex, this object can have the
value { 0 0 }."
::= { atiL2BrBasePortEntry 4 }
atiL2BrBasePortDelayExceededDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source
route bridges."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrBasePortEntry 5 }
atiL2BrBasePortMtuExceededDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames discarded by this port due
to an excessive size. It is incremented by both
transparent and source route bridges."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrBasePortEntry 6 }
--
-- the atiL2BrStp group
--
-- Implementation of the atiL2BrStp group is optional. It is
-- implemented by those bridges that support the Spanning Tree
-- Protocol.
atiL2BrStpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrStpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of bridge spanning tree information."
::= { atiL2BrStp 1 }
atiL2BrStpEntry OBJECT-TYPE
SYNTAX AtiL2BrStpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atiL2BrStpTable."
INDEX { atiL2BrStpLanId }
::= { atiL2BrStpTable 1 }
AtiL2BrStpEntry ::=
SEQUENCE {
atiL2BrStpLanId
INTEGER,
atiL2BrStpProtocolSpecification
INTEGER,
atiL2BrStpPriority
INTEGER,
atiL2BrStpTimeSinceTopologyChange
TimeTicks,
atiL2BrStpTopChanges
Counter,
atiL2BrStpDesignatedRoot
BridgeId,
atiL2BrStpRootCost
INTEGER,
atiL2BrStpRootPort
INTEGER,
atiL2BrStpMaxAge
Timeout,
atiL2BrStpHelloTime
Timeout,
atiL2BrStpHoldTime
INTEGER,
atiL2BrStpForwardDelay
Timeout,
atiL2BrStpBridgeMaxAge
Timeout,
atiL2BrStpBridgeHelloTime
Timeout,
atiL2BrStpBridgeForwardDelay
Timeout
}
atiL2BrStpLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrStpEntry 1 }
atiL2BrStpProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
decLb100(2),
ieee8021d(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined."
::= { atiL2BrStpEntry 2 }
atiL2BrStpPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
atiL2BrBaseBridgeAddress."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.7"
::= { atiL2BrStpEntry 3 }
atiL2BrStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { atiL2BrStpEntry 4 }
atiL2BrStpTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.1.1.3"
::= { atiL2BrStpEntry 5 }
atiL2BrStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.1"
::= { atiL2BrStpEntry 6 }
atiL2BrStpRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of the path to the root as seen from
this bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.2"
::= { atiL2BrStpEntry 7 }
atiL2BrStpRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.3"
::= { atiL2BrStpEntry 8 }
atiL2BrStpMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.4"
::= { atiL2BrStpEntry 9 }
atiL2BrStpHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.5"
::= { atiL2BrStpEntry 10 }
atiL2BrStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.14"
::= { atiL2BrStpEntry 11 }
atiL2BrStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
atiL2BrStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.6"
::= { atiL2BrStpEntry 12 }
atiL2BrStpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atiL2BrStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.8"
::= { atiL2BrStpEntry 13 }
atiL2BrStpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.9"
::= { atiL2BrStpEntry 14 }
atiL2BrStpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atiL2BrStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.3.10"
::= { atiL2BrStpEntry 15 }
--
-- The Spanning Tree Port Table
--
atiL2BrStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrStpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains port-specific information
for the Spanning Tree Protocol."
::= { atiL2BrStp 15 }
atiL2BrStpPortEntry OBJECT-TYPE
SYNTAX AtiL2BrStpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information maintained by every port
about the Spanning Tree Protocol state for that
port."
INDEX { atiL2BrStpPortLanId, atiL2BrStpPort }
::= { atiL2BrStpPortTable 1 }
AtiL2BrStpPortEntry ::=
SEQUENCE {
atiL2BrStpPortLanId
INTEGER,
atiL2BrStpPort
INTEGER,
atiL2BrStpPortPriority
INTEGER,
atiL2BrStpPortState
INTEGER,
atiL2BrStpPortEnable
INTEGER,
atiL2BrStpPortPathCost
INTEGER,
atiL2BrStpPortDesignatedRoot
BridgeId,
atiL2BrStpPortDesignatedCost
INTEGER,
atiL2BrStpPortDesignatedBridge
BridgeId,
atiL2BrStpPortDesignatedPort
OCTET STRING,
atiL2BrStpPortForwardTransitions
Counter
}
atiL2BrStpPortLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrStpPortEntry 1 }
atiL2BrStpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Spanning Tree Protocol management
information."
REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { atiL2BrStpPortEntry 2 }
atiL2BrStpPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
atiL2BrStpPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.1"
::= { atiL2BrStpPortEntry 3 }
atiL2BrStpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see atiL2BrStpPortEnable), this object
will have a value of disabled(1)."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { atiL2BrStpPortEntry 4 }
atiL2BrStpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2"
::= { atiL2BrStpPortEntry 5 }
atiL2BrStpPortPathCost OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { atiL2BrStpPortEntry 6 }
atiL2BrStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.4"
::= { atiL2BrStpPortEntry 7 }
atiL2BrStpPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.5"
::= { atiL2BrStpPortEntry 8 }
atiL2BrStpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.6"
::= { atiL2BrStpPortEntry 9 }
atiL2BrStpPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.7"
::= { atiL2BrStpPortEntry 10 }
atiL2BrStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { atiL2BrStpPortEntry 11 }
--
-- the atiL2BrTp group
--
-- Implementation of the atiL2BrTp group is optional. It is
-- implemented by those bridges that support the transparent
-- bridging mode. A transparent or SRT bridge will implement
-- this group.
atiL2BrTpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrTpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of transparent bridging information."
::= { atiL2BrTp 1 }
atiL2BrTpEntry OBJECT-TYPE
SYNTAX AtiL2BrTpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atiL2BrTpTable."
INDEX { atiL2BrTpLanId }
::= { atiL2BrTpTable 1 }
AtiL2BrTpEntry ::=
SEQUENCE {
atiL2BrTpLanId
INTEGER,
atiL2BrTpLearnedEntryDiscards
Counter,
atiL2BrTpAgingTime
INTEGER
}
atiL2BrTpLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrTpEntry 1 }
atiL2BrTpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { atiL2BrTpEntry 2 }
atiL2BrTpAgingTime OBJECT-TYPE
SYNTAX INTEGER (10..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds."
REFERENCE
"IEEE 802.1D-1990: Section 6.7.1.1.3"
::= { atiL2BrTpEntry 3 }
--
-- The Forwarding Database for Transparent Bridges
--
atiL2BrTpFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrTpFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame."
::= { atiL2BrTp 3 }
atiL2BrTpFdbEntry OBJECT-TYPE
SYNTAX AtiL2BrTpFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information."
INDEX { atiL2BrTpFdbLanId, atiL2BrTpFdbAddress }
::= { atiL2BrTpFdbTable 1 }
AtiL2BrTpFdbEntry ::=
SEQUENCE {
atiL2BrTpFdbLanId
INTEGER,
atiL2BrTpFdbAddress
MacAddress,
atiL2BrTpFdbPort
INTEGER,
atiL2BrTpFdbStatus
INTEGER
}
atiL2BrTpFdbLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrTpFdbEntry 1 }
atiL2BrTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unicast MAC address for which the bridge has
forwarding and/or filtering information."
REFERENCE
"IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
::= { atiL2BrTpFdbEntry 2 }
atiL2BrTpFdbPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Either the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of atiL2BrTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address .
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
atiL2BrTpFdbStatus is not learned(3)."
::= { atiL2BrTpFdbEntry 3 }
atiL2BrTpFdbStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active (2),
other (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of this entry.
The meanings of the values are:
inactive(1) : this entry is not longer valid
(e.g., it was learned but has since
aged-out), but has not yet been
flushed from the table.
active(2) : the value of the corresponding
instance of atiL2BrTpFdbPort was
active, and is being used.
other(3) : none of the following. This would
include the case where some other
MIB object (not the corresponding
instance of atiL2BrTpFdbPort ) is
being used to determine if and how
frames addressed to the value of
the corresponding instance of
atiL2BrTpFdbAddress are being
forwarded."
::= { atiL2BrTpFdbEntry 4 }
--
-- Port Table for Transparent Bridges
--
atiL2BrTpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2BrTpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that contains information about every
port that is associated with this transparent
bridge."
::= { atiL2BrTp 4 }
atiL2BrTpPortEntry OBJECT-TYPE
SYNTAX AtiL2BrTpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of information for each port of a
transparent bridge."
INDEX { atiL2BrTpPortLanId, atiL2BrTpPort }
::= { atiL2BrTpPortTable 1 }
AtiL2BrTpPortEntry ::=
SEQUENCE {
atiL2BrTpPortLanId
INTEGER,
atiL2BrTpPort
INTEGER,
atiL2BrTpPortMaxInfo
INTEGER,
atiL2BrTpPortInFrames
Counter,
atiL2BrTpPortOutFrames
Counter,
atiL2BrTpPortInDiscards
Counter
}
atiL2BrTpPortLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object uniquely identifies the lan or
Virtual lan."
::= { atiL2BrTpPortEntry 1 }
atiL2BrTpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port for which this entry
contains Transparent bridging management
information."
::= { atiL2BrTpPortEntry 2 }
-- It would be nice if we could use ifMtu as the size of the
-- largest INFO field, but we can't because ifMtu is defined
-- to be the size that the (inter-)network layer can use which
-- can differ from the MAC layer (especially if several layers
-- of encapsulation are used).
atiL2BrTpPortMaxInfo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum size of the INFO (non-MAC) field that
this port will receive or transmit."
::= { atiL2BrTpPortEntry 3 }
atiL2BrTpPortInFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrTpPortEntry 4 }
atiL2BrTpPortOutFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrTpPortEntry 5 }
atiL2BrTpPortInDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Count of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrTpPortEntry 6 }
--
-- Trap Attributes for the Fan, Power and temperature Monitoring.
--
atiL2TrapAttrModuleId OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is the Module Numver used when Traps pertinent
to Module is sent."
::= { atiL2TrapAttrGroup 1 }
atiL2TrapAttrPortId OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is the Port Number used when Traps pertinent to
Ports are sent."
::= { atiL2TrapAttrGroup 2 }
--
-- TRAP-TYPE topologyChange when STP topology changes.
--
newRoot TRAP-TYPE
ENTERPRISE alliedTelesyn
DESCRIPTION
"The newRoot trap indicates that the sending agent
has become the new root of the Spanning Tree; the
trap is sent by a bridge soon after its election
as the new root, e.g., upon expiration of the
Topology Change Timer immediately subsequent to
its election. Implementation of this trap is
optional."
::= 101
topologyChange TRAP-TYPE
ENTERPRISE alliedTelesyn
DESCRIPTION
"A topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from
the Forwarding state to the Blocking state. The
trap is not sent if a newRoot trap is sent for the
same transition. Implementation of this trap is
optional."
::= 102
atiL2FanStopTrap TRAP-TYPE
ENTERPRISE alliedTelesyn
VARIABLES {atiL2TrapAttrModuleId }
DESCRIPTION
" A Trap sent from the Module defined by the varable
above when a fan from that Module stops."
::= 103
atiL2TemperatureAbnormalTrap TRAP-TYPE
ENTERPRISE alliedTelesyn
VARIABLES {atiL2TrapAttrModuleId }
DESCRIPTION
" A Trap sent from the Module defined by the varable
above when temperature of the Module is abnormal."
::= 104
atiL2PowerSupplyOutage TRAP-TYPE
ENTERPRISE alliedTelesyn
VARIABLES {atiL2TrapAttrModuleId }
DESCRIPTION
" A Trap sent from the Module defined by the varable
above when one of the power supply goes down."
::= 105
atiL2IntruderAlert TRAP-TYPE
ENTERPRISE alliedTelesyn
VARIABLES {atiL2TrapAttrModuleId, atiL2TrapAttrPortId }
DESCRIPTION
" A Trap sent from the specified module and specified
port when an intruder has been detected."
::= 106
--
-- atiL2QOSConfigGroup (applicable only to at-8326GB, at-9410GB and at-8350GB)
--
atiL2QOSStatus OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the QOS status is enabled, then QOS packets will
be assigned to high or low priority queue. If it is
disabled, packets works normally.(Applicable only to
at-8326GB, at-9410GB and at-8350GB)"
::= { atiL2QOSConfigGroup 1 }
atiL2TrafficMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtiL2TrafficMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"It contains the mapping of all traffic classes and
their priority assignments.(Applicable only to
at-8326GB, at-9410GB and at-8350GB)"
::= { atiL2QOSConfigGroup 2 }
atiL2TrafficMappingEntry OBJECT-TYPE
SYNTAX AtiL2TrafficMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry maps a traffic class to the priority queue
to be used for it's packets. (Applicable only to
at-8326GB, at-9410GB and at-8350GB)"
INDEX { atiL2TrafficClassIndex }
::= { atiL2TrafficMappingTable 1 }
AtiL2TrafficMappingEntry ::=
SEQUENCE {
atiL2TrafficClassIndex
INTEGER,
atiL2PriorityQueue
INTEGER
}
atiL2TrafficClassIndex OBJECT-TYPE
SYNTAX INTEGER(0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Index of the traffic class. It is obtained
from the packet format.(Applicable only to
at-8326GB, at-9410GB and at-8350GB)"
::= { atiL2TrafficMappingEntry 1 }
atiL2PriorityQueue OBJECT-TYPE
SYNTAX INTEGER{
highest(0),
lowest(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority queue to be used to forward packets.
(Applicable only to at-8326GB, at-9410GB and
at-8350GB)"
::= { atiL2TrafficMappingEntry 2 }
END
Reference in New Issue Copy Permalink