david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/arraynetworks/CA-SNMP-MIB8

3040 lines
81 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CA-SNMP-MIB8 DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
Integer32, Counter32, Gauge32, Counter64, Opaque, IpAddress, enterprises
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, TruthValue, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
arrayNetworks MODULE-IDENTITY
LAST-UPDATED "201203090000Z"
ORGANIZATION "Array Networks, Inc."
CONTACT-INFO
" Array Networks
Customer Service
postal: 1371 McCarthy Blvd Milpitas, CA 95035 USA
phone: +1 877 992-7729
email: support@arraynetworks.net"
DESCRIPTION
"This file defines the private CA SNMP MIB extensions."
REVISION "200509140000Z"
DESCRIPTION
"Added raw CPU and IO counters."
REVISION "9912090000Z"
DESCRIPTION
"SMIv2 version converted from older MIB definitions."
::= { enterprises 7564 }
-- IMPORTANT:
-- Listed below are the arrayNetworks Indecies that are currently being used.
-- Current ArrayNetworks MIB Table Entries:
-- processes OBJECT IDENTIFIER ::= { arrayNetworks 1 }
-- NO LONGER SUPPORTED
--
-- prTable OBJECT IDENTIFIER ::= { arrayNetworks 2 }
-- NO LONGER SUPPORTED
--
-- systemInfo OBJECT IDENTIFIER ::= { arrayNetworks 3 }
-- SYSTEM INFO
--
-- memory OBJECT IDENTIFIER ::= { arrayNetworks 4 }
-- MEMORY STATS
--
-- xxxxxx OBJECT IDENTIFIER ::= { arrayNetworks 5 }
-- REMOVED FROM MIB
--
-- disk OBJECT IDENTIFIER ::= { arrayNetworks 6 }
-- NO LONGER SUPPORTED
--
-- load OBJECT IDENTIFIER ::= { arrayNetworks 7 }
-- NO LONGER SUPPORTED
--
-- extTable OBJECT IDENTIFIER ::= { arrayNetworks 8 }
-- NO LONGER SUPPORTED
--
-- diskTable OBJECT IDENTIFIER ::= { arrayNetworks 9 }
-- NO LONGER SUPPORTED
--
-- loadTable OBJECT IDENTIFIER ::= { arrayNetworks 10 }
-- NO LONGER SUPPORTED
--
-- systemStats OBJECT IDENTIFIER ::= { arrayNetworks 11 }
-- NO LONGER SUPPORTED
--
-- caInternal OBJECT IDENTIFIER ::= { arrayNetworks 12 }
-- NO LONGER SUPPORTED
--
-- caExperimental OBJECT IDENTIFIER ::= { arrayNetworks 13 }
-- NO LONGER SUPPORTED
--
-- caDemoMIB OBJECT IDENTIFIER ::= { arrayNetworks 14 }
-- NO LONGER SUPPORTED
--
-- fileTable OBJECT IDENTIFIER ::= { arrayNetworks 15 }
-- NO LONGER SUPPORTED
--
-- revProxyCache OBJECT IDENTIFIER ::= { arrayNetworks 16 }
-- REVERSE PROXY STATS
--
-- xxxxxx OBJECT IDENTIFIER ::= { arrayNetworks 17 }
-- CURRENTLY NOT USED
--
-- vrrp OBJECT IDENTIFIER ::= { arrayNetworks 18 }
-- CLUSTER STATS
--
-- slbMIB OBJECT IDENTIFIER ::= { arrayNetworks 19 }
-- SERVER LOAD BALANCING STATS
--
-- sslMIB OBJECT IDENTIFIER ::= { arrayNetworks 20 }
-- SECURE SOCKET LAYER STATS
--
-- secProxyStats OBJECT IDENTIFIER ::= { arrayNetworks 21 }
-- SECURITY PROXY STATS
--
-- vipStats OBJECT IDENTIFIER ::= { arrayNetworks 22 }
-- VIP STATS
--
-- ifTraffic OBJECT IDENTIFIER ::= { arrayNetworks 23 }
-- INTERFACE TRAFFIC STATS
--
-- caSyslog OBJECT IDENTIFIER ::= { arrayNetworks 24 }
-- SYSLOG STATS & MESSAGES
--
-- clickTcp OBJECT IDENTIFIER ::= { arrayNetworks 25 }
-- CLICKTCP STATS & CONNECTION TABLE
--
-- accesslog OBJECT IDENTIFIER ::= { arrayNetworks 26 }
-- NO LONGER SUPPORTED
--
-- healthCheck OBJECT IDENTIFIER ::= { arrayNetworks 27 }
-- HEALTH CHECK STATS
--
-- compression OBJECT IDENTIFIER ::= { arrayNetworks 28 }
-- HTTP COMPRESSION STATS
--
-- clientApp OBJECT IDENTIFIER ::= { arrayNetworks 29 }
-- SECURITY PROXY CLIENT APP STATS
--
-- performance OBJECT IDENTIFIER ::= { arrayNetworks 30 }
-- SYSTEM PERFORMANCE STATS
--
-- sdns OBJECT IDENTIFIER ::= { arrayNetworks 31 }
-- SMART DNS STATS
--
-- monitor OBJECT IDENTIFIER ::= { arrayNetworks 32 }
-- MONITOR CPU TEMPRATURE AND FAN SPEED ,POWER STATE
--
-- version OBJECT IDENTIFIER ::= { arrayNetworks 100 }
-- NO LONGER SUPPORTED
--
-- snmperrs OBJECT IDENTIFIER ::= { arrayNetworks 101 }
-- NO LONGER SUPPORTED
--
-- mibRegistryTable OBJECT IDENTIFIER ::= { arrayNetworks 102 }
-- NO LONGER SUPPORTED
--
-- caSnmpAgent OBJECT IDENTIFIER ::= { arrayNetworks 250 }
-- NO LONGER SUPPORTED
--
-- caTraps OBJECT IDENTIFIER ::= { arrayNetworks 251 }
-- CUSTOM TRAPS
-- End of arrayNetworks indices description --------------------------
--
-- Define the Float Textual Convention
-- This definition was written by David Perkins.
--
Float ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A single precision floating-point number. The semantics
and encoding are identical for type 'single' defined in
IEEE Standard for Binary Floating-Point,
ANSI/IEEE Std 754-1985.
The value is restricted to the BER serialization of
the following ASN.1 type:
FLOATTYPE ::= [120] IMPLICIT FloatType
(note: the value 120 is the sum of '30'h and '48'h)
The BER serialization of the length for values of
this type must use the definite length, short
encoding form.
For example, the BER serialization of value 123
of type FLOATTYPE is '9f780442f60000'h. (The tag
is '9f78'h; the length is '04'h; and the value is
'42f60000'h.) The BER serialization of value
'9f780442f60000'h of data type Opaque is
'44079f780442f60000'h. (The tag is '44'h; the length
is '07'h; and the value is '9f780442f60000'h."
SYNTAX Opaque (SIZE (7))
caTraps OBJECT IDENTIFIER ::= { arrayNetworks 251 }
caStart NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the agent starts"
::= { caTraps 1 }
caShutdown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the agent terminates"
::= { caTraps 2 }
licenseRemainingDays NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"license remaining days"
::= { caTraps 3}
---
--- The statistics of arrayNetworks' Reverse Proxy Cache MIB
revProxyCache OBJECT IDENTIFIER ::= { arrayNetworks 16 }
-- Requests with Get method in cache BasicStats
cacheBasicStats OBJECT IDENTIFIER ::= { revProxyCache 1 }
-- The advanced statistics are puly to allow developer to gauge the
-- condition of the cache. Please do not try to assume that certain
-- statistics should sum up to some other ones.
cacheStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the reverse proxy cache - on or off"
::= { cacheBasicStats 1 }
requestsReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of requests received by the reverse proxy cache."
::= { cacheBasicStats 2 }
getRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total GET requests received by the reverse proxy cache."
::= { cacheBasicStats 3 }
headRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total HEAD requests received by the reverse proxy cache."
::= { cacheBasicStats 4 }
purgeRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total PURGE requests received by the reverse proxy cache."
::= { cacheBasicStats 5 }
postRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total POST requests received by the reverse proxy cache."
::= { cacheBasicStats 6 }
clientEstabConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current client connections (e.g. from the browsers)."
::= { cacheBasicStats 7 }
serverEstabConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current backend server connections."
::= { cacheBasicStats 8 }
requestsToHttps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Requests redirected to HTTPS."
::= { cacheBasicStats 9 }
requestsOnRegex OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Requests redirected based on regex match"
::= { cacheBasicStats 10 }
requestsToUrl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Requests forwarded with rewritten url."
::= { cacheBasicStats 11 }
responsesToHttps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Locations rewritten to HTTPS."
::= { cacheBasicStats 12 }
responsesOnRegex OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Locations rewritten based on regex match."
::= { cacheBasicStats 13 }
cacheSkip OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cache skip, cache off."
::= { cacheBasicStats 14 }
hitsReply OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"We found the requested URL in the cache. The object was fresh
and we did not have to revalidate. The object was served from
our cache."
::= { cacheBasicStats 15 }
hitsReplyWNotModified OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"We got an IMS header in the request. We validated the
timestamp and decided that the client's copy of this object is
fresh. So we generated a 304 response and sent it out to the
client."
::= { cacheBasicStats 16 }
hitsReplyWPreFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cache hit, reply with Precondition Failed."
::= { cacheBasicStats 17 }
hitRevalidate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The requested object was found in the cache. However, the
request required revalidation (due to client generated
revalidate, proxy generated revalidate or proxy generated forced
miss)."
::= { cacheBasicStats 18 }
cacheMissWNoncacheReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The request does not result in a cache table search.
Something in the request made us deem it non-cacheable (eg.
very long URL, a 'Cache-Control: no-store' header etc."
::= { cacheBasicStats 19 }
cacheMissWNewEntry OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of times the cache table was searched, no matching entry
was found and a new entry was created. However, note
that sometimes, an entry is created temporarily (eg. for an IMS
request resulting in a 304) and is deleted after sending it
out to the client (delayed delete)."
::= { cacheBasicStats 20 }
cacheMissWRespNo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cache miss, create new entry, resp noncacheable."
::= { cacheBasicStats 21 }
cacheHitRatio OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cache hit reply using cache + cache reply with 'not modified'."
::= { cacheBasicStats 22 }
---
--- The statistics of arrayNetworks' Server Load Balance MIB
slbMIB OBJECT IDENTIFIER ::= { arrayNetworks 19 }
slbGeneral OBJECT IDENTIFIER ::= { slbMIB 1 }
slbStats OBJECT IDENTIFIER ::= { slbMIB 2 }
realServer OBJECT IDENTIFIER ::= { slbGeneral 1 }
virtualServer OBJECT IDENTIFIER ::= { slbGeneral 2 }
groupCurCfg OBJECT IDENTIFIER ::= { slbGeneral 3 }
realStats OBJECT IDENTIFIER ::= { slbStats 1 }
virtualStats OBJECT IDENTIFIER ::= { slbStats 2 }
groupStats OBJECT IDENTIFIER ::= { slbStats 3 }
rsCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of real services currently configured."
::= { realServer 1 }
rsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the configuration of real services."
::= { realServer 2 }
rsEntry OBJECT-TYPE
SYNTAX RsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A rsTable entry containing the information of one real service."
INDEX { rsIndex }
::= { rsTable 1 }
RsEntry ::= SEQUENCE {
rsIndex Integer32,
rsID DisplayString,
rsProtocol INTEGER,
rsIpAddr IpAddress,
rsPort INTEGER,
rsMaxConn Integer32,
rsStatus INTEGER,
rsAvgRespTime Integer32,
rsIpAddressType InetAddressType,
rsIpAddress InetAddress
}
rsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each real service."
::= { rsEntry 1 }
rsID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the real service"
::= { rsEntry 2 }
rsProtocol OBJECT-TYPE
SYNTAX INTEGER {
tcp (0),
udp (1),
ftp (2),
ftps (3),
http (4),
https (5),
tcps (6),
dns (7),
l2ip (8),
l2mac (9),
ip (10),
siptcp (11),
sipudp (12),
radacct (13),
radauth (14),
rtsp (15),
vlink (16),
rdp (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol of the real service."
::= { rsEntry 3 }
rsIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The real service IP address."
::= { rsEntry 4 }
rsPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the real service."
DEFVAL { 80 }
::= { rsEntry 5 }
rsMaxConn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of connections per real service."
DEFVAL { 1000 }
::= { rsEntry 6 }
rsStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of real service - up or down."
::= { rsEntry 8 }
rsAvgRespTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Server Average Response Time (in microseconds)"
::= { rsEntry 9 }
rsIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of rsIpAddress."
::= { rsEntry 10 }
rsIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The real service IP address."
::= { rsEntry 11 }
vsCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of virtual services currently configured."
::= { virtualServer 1 }
vsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the configuration of virtual services."
::= { virtualServer 2 }
vsEntry OBJECT-TYPE
SYNTAX VsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A vsTable entry containing the configuration of one virtual service."
INDEX { vsIndex }
::= { vsTable 1 }
VsEntry ::= SEQUENCE {
vsIndex Integer32,
vsID DisplayString,
vsProtocol INTEGER,
vsIpAddr IpAddress,
vsPort INTEGER,
vsMaxConn Integer32,
vsIpAddressType InetAddressType,
vsIpAddress InetAddress
}
vsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each virtual service."
::= { vsEntry 1 }
vsID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the virtual service."
::= { vsEntry 2 }
vsProtocol OBJECT-TYPE
SYNTAX INTEGER {
tcp (0),
udp (1),
ftp (2),
ftps (3),
http (4),
https (5),
tcps (6),
dns (7),
l2ip (8),
l2mac (9),
ip (10),
siptcp (11),
sipudp (12),
radacct (13),
radauth (14),
rtsp (15),
vlink (16),
rdp (17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol of the virtual service."
::= { vsEntry 3 }
vsIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual service IP address."
::= { vsEntry 4 }
vsPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port of the virtual service."
DEFVAL { 80 }
::= { vsEntry 5 }
vsMaxConn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of connections of the virtual service."
DEFVAL { 0 }
::= { vsEntry 6 }
vsIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of vsIpAddress."
::= { vsEntry 7 }
vsIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual service IP address."
::= { vsEntry 8 }
groupCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of groups currently configured."
::= { groupCurCfg 1 }
gpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing group member configuration."
::= { groupCurCfg 2 }
gpEntry OBJECT-TYPE
SYNTAX GpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A gpTable entry containing one group member configuration."
INDEX { gpIndex }
::= { gpTable 1 }
GpEntry ::= SEQUENCE {
gpIndex Integer32,
gpID DisplayString,
realID DisplayString,
gpMetrics INTEGER
}
gpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each group member."
::= { gpEntry 1 }
gpID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the group."
::= { gpEntry 2 }
realID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the real service."
::= { gpEntry 3 }
gpMetrics OBJECT-TYPE
SYNTAX INTEGER {
invalid (0),
rr (1),
lc (2),
sr (3),
pu (4),
ph (5),
pi (6),
pc (7),
hc (8),
hh (9),
ic (10),
rc (11),
sslsid (12),
hi (13),
hip (14),
chi (15),
prox (16),
snmp (17),
sipcid (18),
sipuid (19),
ec (20),
chh (21),
radchu (22),
radchs (23),
hq (24),
rdprt (25),
persistence (26)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Metric used to balance real services within the group."
::= { gpEntry 4 }
rsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Real service statistics table."
::= { realStats 1 }
rsStatsEntry OBJECT-TYPE
SYNTAX RsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A rsStatsTable entry containing the statistics of one real service."
INDEX { realIndex }
::= { rsStatsTable 1 }
RsStatsEntry ::= SEQUENCE {
realIndex Integer32,
realServerID DisplayString,
realAddr IpAddress,
realPort INTEGER,
rsCntOfReq Integer32,
rsConnCnt Integer32,
rsTotalHits Integer32,
realStatus INTEGER,
realAddressType InetAddressType,
realAddress InetAddress
}
realIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each real service."
::= { rsStatsEntry 1 }
realServerID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the real service."
::= { rsStatsEntry 2 }
realAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Real service IP address."
::= { rsStatsEntry 3 }
realPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the real service."
::= { rsStatsEntry 4 }
rsCntOfReq OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of outstanding requests to the real service."
::= { rsStatsEntry 5 }
rsConnCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of open connections to the real service."
::= { rsStatsEntry 6 }
rsTotalHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of requests sent to the real service."
::= { rsStatsEntry 7 }
realStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The health status (up or down) of the real service."
::= { rsStatsEntry 8 }
realAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of realAddress."
::= { rsStatsEntry 9 }
realAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Real service IP address."
::= { rsStatsEntry 10 }
vsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A statistics table for virtual service."
::= { virtualStats 1 }
vsStatsEntry OBJECT-TYPE
SYNTAX VsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A vsStatsTable entry containing the statistics of one virtual service."
INDEX { virtualIndex }
::= { vsStatsTable 1 }
VsStatsEntry ::= SEQUENCE {
virtualIndex Integer32,
virtServerID DisplayString,
virtualAddr IpAddress,
virtualPort INTEGER,
vsURLHits Integer32,
vsHostnameHits Integer32,
vsPerstntCookieHits Integer32,
vsQosCookieHits Integer32,
vsDefaultHits Integer32,
vsPerstntURLHits Integer32,
vsStaticHits Integer32,
vsQosNetworkHits Integer32,
vsQosURLHits Integer32,
vsBackupHits Integer32,
vsCacheHits Integer32,
vsRegexHits Integer32,
vsRCookieHits Integer32,
vsICookieHits Integer32,
vsConnCnt Integer32,
virtualAddressType InetAddressType,
virtualAddress InetAddress,
vsQosClientPortHits Integer32,
vsQosBodyHits Integer32,
vsHeaderHits Integer32,
vsHashURLHits Integer32,
vsRedirectHits Integer32
}
virtualIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each virtual service."
::= { vsStatsEntry 1 }
virtServerID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the virtual service."
::= { vsStatsEntry 2 }
virtualAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the virtual service."
::= { vsStatsEntry 3 }
virtualPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port number of the virtual service."
::= { vsStatsEntry 4 }
vsURLHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS URL policy hits for the virtual service."
::= { vsStatsEntry 5 }
vsHostnameHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS Hostname policy hits for the virtual service."
::= { vsStatsEntry 6 }
vsPerstntCookieHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Persistent Cookie policy hits for the virtual service."
::= { vsStatsEntry 7 }
vsQosCookieHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS Cookie hits for the virtual service."
::= { vsStatsEntry 8 }
vsDefaultHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Default policy hits for the virtual service."
::= { vsStatsEntry 9 }
vsPerstntURLHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Persistent URL policy hits for the virtual service."
::= { vsStatsEntry 10 }
vsStaticHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Static policy hits for the virtual service."
::= { vsStatsEntry 11 }
vsQosNetworkHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS Network policy hits for the virtual service."
::= { vsStatsEntry 12 }
vsQosURLHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS URL policy hits for the virtual service."
::= { vsStatsEntry 13 }
vsBackupHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Backup policy hits for the virtual service."
::= { vsStatsEntry 14 }
vsCacheHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Cache hits for the virtual service."
::= { vsStatsEntry 15 }
vsRegexHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Regex policy hits for the virtual service."
::= { vsStatsEntry 16 }
vsRCookieHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Rewrite Cookie policy hits for the virtual service."
::= { vsStatsEntry 17 }
vsICookieHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Insert Cookie policy hits for the virtual service."
::= { vsStatsEntry 18 }
vsConnCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of open connections to the virtual service."
::= { vsStatsEntry 19 }
virtualAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of virtualAddress."
::= { vsStatsEntry 20 }
virtualAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the virtual service."
::= { vsStatsEntry 21 }
vsQosClientPortHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS Client Port policy hits for the virtual service."
::= { vsStatsEntry 22 }
vsQosBodyHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of QoS Body policy hits for the virtual service."
::= { vsStatsEntry 23 }
vsHeaderHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Header policy hits for the virtual service."
::= { vsStatsEntry 24 }
vsHashURLHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Hash URL policy hits for the virtual service."
::= { vsStatsEntry 25 }
vsRedirectHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Redirect policy hits for the virtual service."
::= { vsStatsEntry 26 }
gpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A statistics table of the group."
::= { groupStats 1 }
gpStatsEntry OBJECT-TYPE
SYNTAX GpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A gpStatsTable entry containing the statistics of one group."
INDEX { groupIndex }
::= { gpStatsTable 1 }
GpStatsEntry ::= SEQUENCE {
groupIndex Integer32,
groupID DisplayString,
gpTotalHits Integer32
}
groupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each group."
::= { gpStatsEntry 1 }
groupID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the group."
::= { gpStatsEntry 2 }
gpTotalHits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total hits for the group."
::= { gpStatsEntry 3 }
---
--- The information of ArrayNetworks's Health Check MIB.
---
healthCheck OBJECT IDENTIFIER ::= { arrayNetworks 27 }
hcStats OBJECT IDENTIFIER ::= { healthCheck 1 }
--hcGeneral OBJECT IDENTIFIER ::= { healthCheck 2 }
hcRSCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of real services being checked."
::= { hcStats 1 }
hcStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Health Check statistics table."
::= { hcStats 2 }
hcStatsEntry OBJECT-TYPE
SYNTAX HcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A hcStatsTable entry containing health check statistics for one real service."
INDEX { hcIndex }
::= { hcStatsTable 1 }
HcStatsEntry ::= SEQUENCE {
hcIndex Integer32,
hcName DisplayString,
hcAddr IpAddress,
hcPort INTEGER,
hcStatus INTEGER,
hcCause DisplayString,
hcNumDowns Integer32,
hcNumUps Integer32,
hcConnAttempt Integer32,
hcConnSuccess Integer32,
hcConnFail Integer32,
hcAddressType InetAddressType,
hcAddress InetAddress
}
hcIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each real service being checked."
::= { hcStatsEntry 1 }
hcName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Real service name."
::= { hcStatsEntry 2 }
hcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Health Check IP address."
::= { hcStatsEntry 3 }
hcPort OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Health Check port."
::= { hcStatsEntry 4 }
hcStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status (UP/DOWN) of the health check."
::= { hcStatsEntry 5 }
hcCause OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason why the health check is being marked UP/DOWN."
::= { hcStatsEntry 6 }
hcNumDowns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the health check is down."
::= { hcStatsEntry 7 }
hcNumUps OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the health check is up."
::= { hcStatsEntry 8 }
hcConnAttempt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of connections attempted."
::= { hcStatsEntry 9 }
hcConnSuccess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful connections."
::= { hcStatsEntry 10 }
hcConnFail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of connection failures."
::= { hcStatsEntry 11 }
hcAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of hcAddress."
::= { hcStatsEntry 12 }
hcAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Health Check IP address."
::= { hcStatsEntry 13 }
--- End of Health Check MIBS
---
--- ArrayNetworks Compression Statistics MIB
---
compression OBJECT IDENTIFIER ::= { arrayNetworks 28 }
totalBytesRcvd OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received."
::= { compression 1 }
totalBytesSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes sent."
::= { compression 2 }
rcvdBytesPerSec OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes received per second."
::= { compression 3 }
sentBytesPerSec OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes sent per second."
::= { compression 4 }
peakRcvdBytesPerSec OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak received bytes per second"
::= { compression 5 }
peakSentBytesPerSec OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak sent bytes per second"
::= { compression 6 }
activeTransac OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of currently active transactions"
::= { compression 7 }
--- End of ArrayNetworks Compression Statistics MIB
---
--- ArrayNetworks performance Statistics MIB
---
memory OBJECT IDENTIFIER ::= { arrayNetworks 4 }
sysMemory OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Curren system total available memory"
::= { memory 1 }
sysMemoryUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current percentage of Network memory utilization"
::= { memory 2 }
sysSwapUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Currently used swap space in MB"
::= { memory 3 }
sysSwapCapacity OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current swap space usage"
::= { memory 4 }
--- End of ArrayNetworks System memory MIB
---
--- ArrayNetworks performance Statistics MIB
---
performance OBJECT IDENTIFIER ::= { arrayNetworks 30 }
cpuUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current percentage of CPU utilization"
::= { performance 1 }
connectionsPerSec OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of connections per second"
::= { performance 2 }
requestsPerSec OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests per second"
::= { performance 3 }
--- End of ArrayNetworks performance Statistics MIB
---
--- ArrayNetworks monitor Statistics MIB
---
monitor OBJECT IDENTIFIER ::= { arrayNetworks 32 }
cputemp OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..511))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current cpu temprature of cpu and sys"
::= { monitor 1 }
fanspeed OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..1023))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current fan speed"
::= { monitor 2 }
powerstate OBJECT-TYPE
SYNTAX INTEGER {
ok (0),
one-of-the-power-supply-modules-has-failed(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current dual power supply state (0 (ok),1(error))"
::= { monitor 3 }
--- End of ArrayNetworks monitor Statistics MIB
--- ArrayNetworks Sdns Statistics MIB
---
sdns OBJECT IDENTIFIER ::= { arrayNetworks 31 }
totalReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total DNS requests."
::= { sdns 1 }
totalSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total successful DNS resolvings."
::= { sdns 2 }
totalFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failed DNS resolvings."
::= { sdns 3 }
reqLastSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total DNS requests in the last second."
::= { sdns 4 }
succLastSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total successful DNS resolvings in the last second."
::= { sdns 5 }
failLastSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failed DNS resolvings in the last second."
::= { sdns 6 }
reqPeakSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak DNS requests in a second."
::= { sdns 7 }
succPeakSec OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak successful DNS resolvings in a second."
::= { sdns 8 }
reqLastMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total DNS requests in the last minute."
::= { sdns 9 }
succLastMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total successful DNS resolvings in the last minute."
::= { sdns 10 }
failLastMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failed DNS resolvings in the last minute."
::= { sdns 11 }
reqPeakMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak DNS requests in a minute."
::= { sdns 12 }
succPeakMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak successful DNS resolvings in a minute."
::= { sdns 13 }
reqLastHour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total DNS requests in the last hour."
::= { sdns 14 }
succLastHour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total successful DNS resolvings in the last hour."
::= { sdns 15 }
failLastHour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failed DNS resolvings in the last hour."
::= { sdns 16 }
reqPeakHour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak DNS requests in an hour."
::= { sdns 17 }
succPeakHour OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak successful DNS resolvings in an hour."
::= { sdns 18 }
reqLastDay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total DNS requests in the last day."
::= { sdns 19 }
succLastDay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total successful DNS resolvings in the last day."
::= { sdns 20 }
failLastDay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failed DNS resolvings in the last day."
::= { sdns 21 }
reqPeakDay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak DNS requests in a day."
::= { sdns 22 }
succPeakDay OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak successful DNS resolvings in a day."
::= { sdns 23 }
reqLastSec5 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total DNS requests in the last 5 seconds."
::= { sdns 24 }
succLastSec5 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total successful DNS resolvings in the last 5 seconds."
::= { sdns 25 }
failLastSec5 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failed DNS resolvings in the last 5 seconds."
::= { sdns 26 }
reqPeakSec5 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak DNS requests in 5 seconds."
::= { sdns 27 }
succPeakSec5 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak successful DNS resolvings in 5 seconds."
::= { sdns 28 }
--- End of ArrayNetworks Sdns Statistics MIB
---
--- The information of arrayNetworks' Virtual Router Redundancy Protocol MIB
vrrp OBJECT IDENTIFIER ::= { arrayNetworks 18 }
clusterVrrp OBJECT IDENTIFIER ::= { vrrp 1 }
-- vrrpStatistics OBJECT IDENTIFIER ::= { caVrrp 2 }
maxCluster OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current maximum possible number of entries in the vrrpTable,
which is 255 * (number of interfaces for which a cluster is
defined). 255 is the max number of VIPs in a cluster."
::= { clusterVrrp 1 }
clusterNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the vrrpTable."
::= { clusterVrrp 2 }
vrrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing clustering configuration"
::= { clusterVrrp 3 }
vrrpEntry OBJECT-TYPE
SYNTAX VrrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the vrrpTable. Each entry represents a cluster VIP
and not the cluster itself. If a cluster has n VIPs, then there
will be n entries for the cluster in the vrrpTable (0 <= n <= 255).
All the entries in the vrrpTable belonging to a single cluster
will have the same values for all the fields except
clusterVirIndex and clusterVirAddr"
INDEX { clusterVirIndex }
::= { vrrpTable 1 }
VrrpEntry ::= SEQUENCE {
clusterVirIndex Integer32,
clusterId Integer32,
clusterVirState INTEGER,
clusterVirIfname DisplayString,
clusterVirAddr IpAddress,
clusterVirAuthType INTEGER,
clusterVirAuthPasswd DisplayString,
clusterVirPreempt INTEGER,
clusterVirInterval Integer32,
clusterVirPriority Integer32,
clusterVirAddressType InetAddressType,
clusterVirAddress InetAddress
}
clusterVirIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cluster virtual table index"
::= { vrrpEntry 1 }
clusterId OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cluster identifier"
::= { vrrpEntry 2 }
clusterVirState OBJECT-TYPE
SYNTAX INTEGER {
incomplete (0),
reserverd (1),
init (2),
backup (3),
master (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the cluster"
::= { vrrpEntry 3 }
clusterVirIfname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface name on which the cluster is defined"
::= { vrrpEntry 4 }
clusterVirAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A virtual ip address (VIP) in the cluster"
::= { vrrpEntry 5 }
clusterVirAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
simple-text-password(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(0) - no authentication
simple-text-password(1) - use password specified in cluster
virtual for authentication."
DEFVAL { none }
::= { vrrpEntry 6 }
clusterVirAuthPasswd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The password for authentication."
::= { vrrpEntry 7 }
clusterVirPreempt OBJECT-TYPE
SYNTAX INTEGER {
false (0),
true (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for controling whether a higher priority Backup
VRRP virtual preempts a low priority Master."
DEFVAL { true }
::= { vrrpEntry 8 }
clusterVirInterval OBJECT-TYPE
SYNTAX Integer32 (3..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VRRP advertisement interval"
DEFVAL { 5 }
::= { vrrpEntry 9 }
clusterVirPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Priority of the local node in the cluster"
DEFVAL { 100 }
::= { vrrpEntry 10 }
clusterVirAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of clusterVirAddress."
::= { vrrpEntry 11 }
clusterVirAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A virtual ip address (VIP) in the cluster"
::= { vrrpEntry 12 }
---
--- The information of arrayNetworks' Secure Sockets Layer MIB
sslMIB OBJECT IDENTIFIER ::= { arrayNetworks 20 }
sslGeneral OBJECT IDENTIFIER ::= { sslMIB 1 }
sslStats OBJECT IDENTIFIER ::= { sslMIB 2 }
vhostNum OBJECT-TYPE
SYNTAX Integer32(1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SSL hosts currently configured."
::= { sslGeneral 2 }
totalOpenSSLConns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of open SSL connections (all SSL hosts)"
::= { sslStats 1 }
totalAcceptedConns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of accepted SSL connections (all SSL hosts)"
::= { sslStats 2 }
totalRequestedConns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of requested SSL connections (all SSL hosts)"
::= { sslStats 3 }
sslTable OBJECT-TYPE
SYNTAX SEQUENCE OF SslEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SSL host statistics table"
::= { sslStats 4 }
sslEntry OBJECT-TYPE
SYNTAX SslEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sslTable entry for one SSL host"
INDEX { sslIndex }
::= { sslTable 1 }
SslEntry ::= SEQUENCE {
sslIndex Integer32,
vhostName DisplayString,
openSSLConns Integer32,
acceptedConns Integer32,
requestedConns Integer32,
resumedSess Integer32,
resumableSess Integer32,
missSess Integer32,
connsPerSec Integer32
}
sslIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SSL table index "
::= { sslEntry 1 }
vhostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the SSL host"
::= { sslEntry 2 }
openSSLConns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Open SSL connections for SSL hostName"
::= { sslEntry 3 }
acceptedConns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accepted SSL connections for SSL hostName"
::= { sslEntry 4 }
requestedConns OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requested SSL connections for SSL hostName"
::= { sslEntry 5 }
resumedSess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of resumed SSL sessions for SSL hostName"
::= { sslEntry 6 }
resumableSess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of resumable SSL sessions for SSL hostName"
::= { sslEntry 7 }
missSess OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SSL session misses for SSL hostName"
::= { sslEntry 8 }
connsPerSec OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SSL connections established per second"
::= { sslEntry 9 }
---
--- The information of arrayNetworks' Syslog Message MIB File
caSyslog OBJECT IDENTIFIER ::= { arrayNetworks 24 }
logBasic OBJECT IDENTIFIER ::= { caSyslog 1 }
logHistory OBJECT IDENTIFIER ::= { caSyslog 2 }
caSyslogTrap OBJECT IDENTIFIER ::= { caSyslog 3 }
-- Textual Conventions
SyslogSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The severity of a syslog message. The enumeration
values are equal to the values that syslog uses + 1.
For example, with syslog, emergency=0."
SYNTAX INTEGER {
emergency(0),
alert(1),
critical(2),
error(3),
warning(4),
notice(5),
info(6),
debug(7)
}
-- Basic syslog objects
logNotificationsSent OBJECT-TYPE
SYNTAX Counter32
UNITS "notifications"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of syslog notifications that
have been sent. This number may include notifications
that were prevented from being transmitted due to
reasons such as resource limitations and/or
non-connectivity. If one is receiving notifications,
one can periodically poll this object to determine if
any notifications were missed. If so, a poll of the
logHistoryTable might be appropriate."
::= { logBasic 1 }
logNotificationsEnabled OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether logMessageGenerated notifications
will or will not be sent when a syslog message is
generated by the device. Disabling notifications
does not prevent syslog messages from being added
to the logHistoryTable."
DEFVAL { disable }
::= { logBasic 2 }
logMaxSeverity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates which syslog severity levels will be
processed. Any syslog message with a severity value
greater than this value will be ignored by the agent.
note: severity numeric values increase as their
severity decreases, e.g. error(3) is more severe than
debug(7)."
DEFVAL { warning }
::= { logBasic 3 }
-- Syslog message history table
logHistTableMaxLength OBJECT-TYPE
SYNTAX Integer32 (0..500)
UNITS "entries"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper limit on the number of entries that the
logHistoryTable may contain. A value of 0 will
prevent any history from being retained. When this
table is full, the oldest entry will be deleted and
a new one will be created."
DEFVAL { 1 }
::= { logHistory 1 }
logHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of syslog messages generated by this device.
All 'interesting' syslog messages (i.e. severity <=
logMaxSeverity) are entered into this table."
::= { logHistory 2 }
logHistoryEntry OBJECT-TYPE
SYNTAX LogHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A syslog message that was previously generated by this
device. Each entry is indexed by a message index."
INDEX { index }
::= { logHistoryTable 1 }
LogHistoryEntry ::= SEQUENCE {
index Integer32,
severity SyslogSeverity,
msgText DisplayString
}
index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A monotonically increasing integer for the sole
purpose of indexing messages. When it reaches the
maximum value the agent flushes the table and wraps
the value back to 1."
::= { logHistoryEntry 1 }
severity OBJECT-TYPE
SYNTAX SyslogSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of the message."
::= { logHistoryEntry 2 }
msgText OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text of the message. If the text of the message
exceeds 255 bytes, the message will be truncated to
254 bytes and a '*' character will be appended,
indicating that the message has been truncated."
::= { logHistoryEntry 3 }
-- notifications
syslogTrap NOTIFICATION-TYPE
OBJECTS { severity,
msgText
}
STATUS current
DESCRIPTION
"When a syslogTrap message is generated by the device a
syslogTrap notification is sent. The
sending of these notifications can be enabled/disabled
via the logNotificationsEnabled object."
::= { caSyslogTrap 1 }
---
--- The statistics of arrayNetworks' VIP Group MIB
vipStats OBJECT IDENTIFIER ::= { arrayNetworks 22 }
vipStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of VIP statistics gathering - on or off"
::= { vipStats 1 }
hostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hostname that the VIP is representing (hostname of the appliance)"
::= { vipStats 2 }
currentTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current time in the format of MM/DD/YY HH:MM "
::= { vipStats 3 }
totalIPPktsIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ip packets received on all VIPs"
::= { vipStats 4 }
totalIPPktsOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ip packets sent out on all VIPs"
::= { vipStats 5 }
totalIPBytesIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP bytes received on all VIPs"
::= { vipStats 6 }
totalIPBytesOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP bytes sent out on all VIPs"
::= { vipStats 7 }
ipStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of VIP statistics."
::= { vipStats 8 }
ipStatsEntry OBJECT-TYPE
SYNTAX IpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ipStatsTable is created
for each VIP."
INDEX {
ipAddrType, ipAddr
}
::= { ipStatsTable 1 }
IpStatsEntry ::=
SEQUENCE {
ipIndex Integer32,
ipAddress IpAddress,
ipPktsIn Counter64,
ipBytesIn Counter64,
ipPktsOut Counter64,
ipBytesOut Counter64,
startTime DisplayString,
ipAddrType InetAddressType,
ipAddr InetAddress
}
ipIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VIP statistics table index"
::= { ipStatsEntry 1 }
ipAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VIP address"
::= { ipStatsEntry 2 }
ipPktsIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP packets received on the VIP"
::= { ipStatsEntry 3 }
ipBytesIn OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes received on the VIP"
::= { ipStatsEntry 4 }
ipPktsOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets sent out on the VIP"
::= { ipStatsEntry 5 }
ipBytesOut OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of bytes sent out on the VIP"
::= { ipStatsEntry 6 }
startTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time statistics gathering was enabled for the VIP"
::= { ipStatsEntry 7 }
ipAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of ipAddress"
::= { ipStatsEntry 8 }
ipAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VIP address"
::= { ipStatsEntry 9 }
-- Implementation of the Interfaces group is mandatory for
-- all systems.
ifTraffic OBJECT IDENTIFIER ::= { arrayNetworks 23 }
infNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of network interfaces present on this system."
::= { ifTraffic 1 }
infTotalInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total accumulated number of octets received on all the
active interfaces (loopback is not included)"
::= { ifTraffic 2 }
infTotalOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total accumulated number of octets transmitted out on
all the active interfaces (loopback is not included)"
::= { ifTraffic 3 }
infTable OBJECT-TYPE
SYNTAX SEQUENCE OF InfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface statistics. The number of
entries is given by the value of infNumber."
::= { ifTraffic 4 }
infEntry OBJECT-TYPE
SYNTAX InfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An infTable entry for one interface"
INDEX { infIndex }
::= { infTable 1 }
InfEntry ::=
SEQUENCE {
infIndex
INTEGER,
infDescr
DisplayString,
infOperStatus
INTEGER,
infAddress
IpAddress,
infInOctets
Counter64,
infInUcastPkts
Counter64,
infInNUcastPkts
Counter64,
infInDiscards
Counter64,
infInErrors
Counter64,
infInUnknownProtos
Counter64,
infOutOctets
Counter64,
infOutUcastPkts
Counter64,
infOutNUcastPkts
Counter64,
infOutErrors
Counter64,
infIpv4AddressType
InetAddressType,
infIpv4Address
InetAddress,
infIpv6AddressType
InetAddressType,
infIpv6Address
InetAddress,
infInBandwidth
Counter64,
infOutBandwidth
Counter64,
infInMcastPkts
Counter64,
infOutMcastPkts
Counter64,
infInBcastPkts
Counter64,
infOutBcastPkts
Counter64
}
infIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each interface. Its value
ranges between 1 and the value of infNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization."
::= { infEntry 1 }
infDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the interface"
::= { infEntry 2 }
infOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2) -- plug off the cable and delete interface address
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface (up or down)."
::= { infEntry 3 }
infAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's IP address"
::= { infEntry 4 }
infInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the interface,
including framing characters."
::= { infEntry 5 }
infInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer."
::= { infEntry 6 }
infInNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or
broadcast address at this sub-layer."
::= { infEntry 7 }
infInDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space."
::= { infEntry 8 }
infInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of inbound
transmission units that contained errors preventing them
from being deliverable to a higher-layer protocol."
::= { infEntry 9 }
infInUnknownProtos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0."
::= { infEntry 10 }
infOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { infEntry 11 }
infOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent."
::= { infEntry 12 }
infOutNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent."
::= { infEntry 13 }
infOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors."
::= { infEntry 14 }
infIpv4AddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of infIpv4Address(should always ipv4)."
::= { infEntry 15 }
infIpv4Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's IPv4 address"
::= { infEntry 16 }
infIpv6AddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of infIpv6Address(should always ipv6)."
::= { infEntry 17 }
infIpv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's IPv6 address"
::= { infEntry 18 }
infInBandwidth OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Inside throughput(bits/second) of the last 5 minutes for
the interfaces."
::= { infEntry 19 }
infOutBandwidth OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Outside throughput(bits/second) of the last 5 minutes for
the interfaces."
::= { infEntry 20 }
infInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer."
::= { infEntry 21 }
infOutMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent."
::= { infEntry 22 }
infInBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer."
::= { infEntry 23 }
infOutBcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent."
::= { infEntry 24 }
-- Implementation of the ClickTCP is mandatory for all systems.
clickTcp OBJECT IDENTIFIER ::= { arrayNetworks 25 }
ctcpActiveOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times ClickTCP connections have made a direct
transition to the SYN-SENT state from the CLOSED state."
::= { clickTcp 1 }
ctcpPassiveOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times ClickTCP connections have made a direct
transition to the SYN-RCVD state from the LISTEN state."
::= { clickTcp 2 }
ctcpAttemptFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times ClickTCP connections have made a direct
transition to the CLOSED state from either the SYN-SENT
state or the SYN-RCVD state, plus the number of times TCP
connections have made a direct transition to the LISTEN
state from the SYN-RCVD state."
::= { clickTcp 3 }
ctcpEstabResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times ClickTCP connections have made a direct
transition to the CLOSED state from either the ESTABLISHED
state or the CLOSE-WAIT state."
::= { clickTcp 4 }
ctcpCurrEstab OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ClickTCP connections for which the current state
is either ESTABLISHED or CLOSE-WAIT."
::= { clickTcp 5 }
ctcpInSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ClickTCP segments received, including those
received in error. This count includes segments received on
currently established connections."
::= { clickTcp 6 }
ctcpOutSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ClickTCP segments sent, including those on
current connections but excluding those containing only
retransmitted octets."
::= { clickTcp 7 }
ctcpRetransSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of segments retransmitted - that is, the
number of ClickTCP segments transmitted containing one or more
previously transmitted octets."
::= { clickTcp 8 }
ctcpInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of segments received in error (e.g., bad
ClickTCP checksums)."
::= { clickTcp 9 }
ctcpOutRsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ClickTCP segments sent containing the RST flag."
::= { clickTcp 10 }
-- the ClickTCP Connection table
-- The ClickTCP connection table contains information about this
-- entity's existing ClickTCP connections.
ctcpConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtcpConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing ClickTCP connection-specific information."
::= { clickTcp 11 }
ctcpConnEntry OBJECT-TYPE
SYNTAX CtcpConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the ctcpConnTable containing information
about a particular current TCP connection. Each row of this
table is transient, in that it ceases to exist when (or soon
after) the connection makes the transition to the CLOSED
state."
INDEX {
ctcpIndex
}
::= { ctcpConnTable 1 }
CtcpConnEntry ::= SEQUENCE {
ctcpIndex INTEGER,
ctcpConnState INTEGER,
ctcpConnLocalAddress IpAddress,
ctcpConnLocalPort INTEGER,
ctcpConnRemAddress IpAddress,
ctcpConnRemPort INTEGER,
ctcpConnLocalAddrType InetAddressType,
ctcpConnLocalAddr InetAddress,
ctcpConnRemAddrType InetAddressType,
ctcpConnRemAddr InetAddress
}
ctcpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each clicktcp connection. "
::= { ctcpConnEntry 1 }
ctcpConnState OBJECT-TYPE
SYNTAX INTEGER {
closed(1),
listen(2),
synSent(3),
synReceived(4),
established(5),
finWait1(6),
finWait2(7),
closeWait(8),
lastAck(9),
closing(10),
timeWait(11),
deleteTCB(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this TCP connection."
::= { ctcpConnEntry 2 }
ctcpConnLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address for this TCP connection. In the case
of a connection in the listen state which is willing to
accept connections for any IP interface associated with the
node, the value 0.0.0.0 is used."
::= { ctcpConnEntry 3 }
ctcpConnLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port number for this TCP connection."
::= { ctcpConnEntry 4 }
ctcpConnRemAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address for this TCP connection."
::= { ctcpConnEntry 5 }
ctcpConnRemPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port number for this TCP connection."
::= { ctcpConnEntry 6 }
ctcpConnLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of ctcpConnLocalAddress."
::= { ctcpConnEntry 7 }
ctcpConnLocalAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local IP address for this TCP connection. In the case
of a connection in the listen state which is willing to
accept connections for any IP interface associated with the
node, the value 0.0.0.0/:: is used."
::= { ctcpConnEntry 8 }
ctcpConnRemAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type of ctcpConnRemAddress."
::= { ctcpConnEntry 9 }
ctcpConnRemAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote IP address for this TCP connection."
::= { ctcpConnEntry 10 }
-- ArrayNetworks system information MIB
systemInfo OBJECT IDENTIFIER ::= { arrayNetworks 3 }
serialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number of the equipment"
::= { systemInfo 1 }
-- End of ArrayNetworks system information MIB
END
Reference in New Issue Copy Permalink