mibs/MIBS/arris/ARRIS-C3-SUBINT-MIB

516 lines
18 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
ARRIS-C3-SUBINT-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
cmtsC3
FROM ARRIS-MIB;
cmtsC3SubIntMIB MODULE-IDENTITY
LAST-UPDATED "200308200000Z" -- 20th August 2003
ORGANIZATION "Arris International"
CONTACT-INFO
" Network Management
Postal: Arris International.
4400 Cork Airport Business Park
Cork Airport, Kinsale Road
Cork, Ireland.
Tel: +353 21 7305 800
Fax: +353 21 4321 972"
DESCRIPTION
"This MIB manages the Sub-Interface software on the Arris CMTS C3"
::= { cmtsC3 11 }
dcxSubIntObjects OBJECT IDENTIFIER ::= { cmtsC3SubIntMIB 1 }
dcxSubIntControlGroup OBJECT IDENTIFIER ::= { dcxSubIntObjects 1 }
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- SUB INTERFACE TABLE
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
dcxSubIntTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcxSubIntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arris C3 Proprietary Sub-Interface table"
::= { dcxSubIntControlGroup 1 }
dcxSubIntEntry OBJECT-TYPE
SYNTAX DcxSubIntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the dcxSubIntTable. An entry in this table exists
for each Sub-Interface configured on the CMTS"
INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex}
::= { dcxSubIntTable 1 }
DcxSubIntEntry ::= SEQUENCE {
dcxSubIntSlotIndex Unsigned32,
dcxSubIntPortIndex Unsigned32,
dcxSubIntSubIntIndex Unsigned32,
dcxSubIntBridgeGroupNum Unsigned32,
dcxSubIntManagementAccess TruthValue,
dcxSubIntPrimaryIpAddress IpAddress,
dcxSubIntPrimaryIpMask IpAddress,
dcxSubIntPrimaryIpBCastAddress IpAddress,
dcxSubIntRelayEnabled TruthValue,
dcxSubIntRelayInformationOption TruthValue,
dcxSubIntGiaddrPolicy INTEGER,
dcxSubIntInboundAclIndex Unsigned32,
dcxSubIntOutgoingAclIndex Unsigned32,
dcxSubIntUnboundTag Unsigned32,
dcxSubIntUnboundTagIsNative TruthValue,
dcxSubIntOperational TruthValue,
dcxSubIntStatus RowStatus
}
dcxSubIntSlotIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the slot index of the card in the Cmts"
::= { dcxSubIntEntry 1 }
dcxSubIntPortIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the port index of the port on a card"
::= { dcxSubIntEntry 2 }
dcxSubIntSubIntIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the sub-interface index of the sub-inteface on a port"
::= { dcxSubIntEntry 3 }
dcxSubIntBridgeGroupNum OBJECT-TYPE
SYNTAX Unsigned32(0..254)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bridge-group number which the sub-interface is configured on,
0 is reserved, 255 indicates not configured in a bridge-group"
::= { dcxSubIntEntry 4 }
dcxSubIntManagementAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is management of Cmts allowed through sub-interface "
::= { dcxSubIntEntry 5 }
dcxSubIntPrimaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"primary ip address of sub-interface"
::= { dcxSubIntEntry 6 }
dcxSubIntPrimaryIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"primary ip subnet mask of sub-interface"
::= { dcxSubIntEntry 7 }
dcxSubIntPrimaryIpBCastAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"primary ip subnet broadcast address of sub-interface"
::= { dcxSubIntEntry 8 }
dcxSubIntRelayEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"are DHCP packets relayed on this sub-interface "
::= { dcxSubIntEntry 9 }
dcxSubIntRelayInformationOption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is the information options added to the DHCP packets relayed on this
sub-interface. Has no effect if dcxSubIntRelayEnabled is False on the
sub-interface."
::= { dcxSubIntEntry 10 }
dcxSubIntGiaddrPolicy OBJECT-TYPE
SYNTAX INTEGER {
off (0),
primary (1),
policy (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"which giaddr is used for DHCP packets relayed from CPEs on this sub-interface,
off(0) is returned when dcxSubIntRelayEnabled is False,
primary(1) indicates that the primary address on sub-interface is used,
policy(2) indicates that the first secondary is used."
::= { dcxSubIntEntry 11 }
dcxSubIntInboundAclIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..2999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"which Access Control List is this sub-interface bound to for inbound packets, a value
of zero indicates no ACL binding for inbound packets on the sub-interface"
::= { dcxSubIntEntry 12 }
dcxSubIntOutgoingAclIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..2999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"which Access Control List is this sub-interface bound to for outgoing packets, a value
of zero indicates no ACL binding for inbound packets on the sub-interface"
::= { dcxSubIntEntry 13 }
dcxSubIntUnboundTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sub-interface encapsulate Vlan Tag value, 0 indicates no tag"
::= { dcxSubIntEntry 14 }
dcxSubIntUnboundTagIsNative OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sub-interface will not generate packets with tags when native
is configured"
::= { dcxSubIntEntry 15 }
dcxSubIntOperational OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"states if the subinterface is operational or not, factors are dcxSubIntStatus and the
physical ports oper and admin status"
::= { dcxSubIntEntry 16 }
dcxSubIntStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls and reflects the status of rows in this table.
Rows in this table may be created by either the create-and-go or
create-and-wait paradigms. There is no restriction on changing
values in a row of this table while the row is active."
::= { dcxSubIntEntry 17 }
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- SUB INTERFACE IP ADDRESS TABLE
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
dcxSubIntIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcxSubIntIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arris C3 Proprietary Sub-Interface table"
::= { dcxSubIntControlGroup 2 }
dcxSubIntIpEntry OBJECT-TYPE
SYNTAX DcxSubIntIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the dcxSubIntIpTable. An entry in this table exists for
each IP address configured on the Sub-Interface identified by
the dcxSubIntNumber"
INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex, dcxSubIntIpIndex}
::= { dcxSubIntIpTable 1 }
DcxSubIntIpEntry ::= SEQUENCE {
dcxSubIntIpIndex Unsigned32,
dcxSubIntIpAddress IpAddress,
dcxSubIntIpAddressType INTEGER,
dcxSubIntIpMask IpAddress,
dcxSubIntIpBCastAddress IpAddress,
dcxSubIntIpStatus RowStatus
}
dcxSubIntIpIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sub-interface secondary IP address index"
::= { dcxSubIntIpEntry 1 }
dcxSubIntIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"a secondary ip address of sub-interface"
::= { dcxSubIntIpEntry 2 }
dcxSubIntIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"a secondary ip subnet mask of sub-interface"
::= { dcxSubIntIpEntry 3 }
dcxSubIntIpBCastAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"a secondary ip subnet broadcast address
of sub-interface"
::= { dcxSubIntIpEntry 4 }
dcxSubIntIpAddressType OBJECT-TYPE
SYNTAX INTEGER
{ primary(1), secondary(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"primary(1): address is the primary address on
the sub-interface, only one allowed
secondary(2):address is one of the secondary
addresses configured on the sub-interface"
::= { dcxSubIntIpEntry 5 }
dcxSubIntIpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls and reflects the status of rows in this table.
Rows in this table may be created by the create-and-go
paradigm. There is no restriction on changing values
in a row of this table while the row is active."
::= { dcxSubIntIpEntry 6 }
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- CABLE HELPER ADDRESS TABLE
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
dcxSubIntCableHelperTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcxSubIntCableHelperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arris C3 Proprietary Sub-Interface Cable Helper Table"
::= { dcxSubIntControlGroup 3 }
dcxSubIntCableHelperEntry OBJECT-TYPE
SYNTAX DcxSubIntCableHelperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the dcxSubIntCableHelperTable.
An entry in this table exists for each cable helper
IP address configured on the Sub-Interface which is
identified using the dcxSubIntNumber"
INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex, dcxSubIntCableHelperType, dcxSubIntCableHelperIndex}
::= { dcxSubIntCableHelperTable 1 }
DcxSubIntCableHelperEntry ::= SEQUENCE {
dcxSubIntCableHelperType INTEGER,
dcxSubIntCableHelperIndex Unsigned32,
dcxSubIntCableHelperIpAddress IpAddress,
dcxSubIntCableHelperStatus RowStatus
}
dcxSubIntCableHelperType OBJECT-TYPE
SYNTAX INTEGER {
default (0),
cm (1),
cpe (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"category of cable helper address.
cm(1) these helper addresses are only used when relaying
DHCP packets originating from a CM.
cpe(2) these helper addresses are only used when relaying
DHCP packets originating from a CPE.
default(0) these helper addresses are used when:
- relaying DHCP packets originating from a CM when no
helper address of type cm(1) is configured
or
- relaying DHCP packets originating from a CPE when no
helper address of type cpe(2) is configured"
::= { dcxSubIntCableHelperEntry 1 }
dcxSubIntCableHelperIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sub-interface cable helper index"
::= { dcxSubIntCableHelperEntry 2 }
dcxSubIntCableHelperIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cable helper ip address configured on sub-interface"
::= { dcxSubIntCableHelperEntry 3 }
dcxSubIntCableHelperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls and reflects the status of rows in this table.
Rows in this table may be created by the create-and-go
paradigm. Entries in this table can only be created or
deleted, no modification is possible."
::= { dcxSubIntCableHelperEntry 4 }
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- VLAN TAG TABLE
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
dcxSubIntVlanTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF DcxSubIntVlanTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arris C3 Proprietary Sub-Interface Vlan Tag Table"
::= { dcxSubIntControlGroup 4 }
dcxSubIntVlanTagEntry OBJECT-TYPE
SYNTAX DcxSubIntVlanTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the dcxSubIntVlanTagTable.
An entry in this table exists for each Vlan tag
that is configured on the sub-interface (which is
identified using the dcxSubIntNumber)"
INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex, dcxSubIntVlanTag}
::= { dcxSubIntVlanTagTable 1 }
DcxSubIntVlanTagEntry ::= SEQUENCE {
dcxSubIntVlanTag Unsigned32,
dcxSubIntVlanNative TruthValue,
dcxSubIntVlanIsBound TruthValue,
dcxSubIntBoundVlanSlotIndex Integer32,
dcxSubIntBoundVlanPortIndex Integer32,
dcxSubIntBoundVlanSubIntIndex Integer32,
dcxSubIntBoundVlanTag Unsigned32,
dcxSubIntBoundVlanNative TruthValue,
dcxSubIntVlanTagStatus RowStatus
}
dcxSubIntVlanTag OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sub-interface Vlan Tag value, 0 indicates no tag"
::= { dcxSubIntVlanTagEntry 1 }
dcxSubIntVlanNative OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sub-interface will not generate packets with tags when native
is configured"
::= { dcxSubIntVlanTagEntry 2 }
dcxSubIntVlanIsBound OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"is sub-interface tag bound to another sub-interface's VLAN tag"
::= { dcxSubIntVlanTagEntry 3 }
dcxSubIntBoundVlanSlotIndex OBJECT-TYPE
SYNTAX Integer32(-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"slot index of VLAN tag that dcxSubIntVlanTag is bound to
-1 when VLAN not bound to another VLAN tag on another
sub-interface"
::= { dcxSubIntVlanTagEntry 4 }
dcxSubIntBoundVlanPortIndex OBJECT-TYPE
SYNTAX Integer32(-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"port index of VLAN tag that dcxSubIntVlanTag is bound to
-1 returned when VLAN not bound to another VLAN tag on another
sub-interface"
::= { dcxSubIntVlanTagEntry 5 }
dcxSubIntBoundVlanSubIntIndex OBJECT-TYPE
SYNTAX Integer32(-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sub interface index of VLAN tag that dcxSubIntVlanTag is bound to
-1 returned when VLAN not bound to another VLAN tag on another
sub-interface"
::= { dcxSubIntVlanTagEntry 6 }
dcxSubIntBoundVlanTag OBJECT-TYPE
SYNTAX Unsigned32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"sub-interface Vlan Tag value, 0 indicates no tag"
::= { dcxSubIntVlanTagEntry 7 }
dcxSubIntBoundVlanNative OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bound sub-interface will not generate packets with tags when native
is configured
FLASE will be returned when VLAN not bound to another VLAN tag on another
sub-interface"
::= { dcxSubIntVlanTagEntry 8 }
dcxSubIntVlanTagStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Controls and reflects the status of rows in this table.
Rows in this table may be created by the create-and-go
paradigm. There is no restriction on changing values
in a row of this table while the row is active."
::= { dcxSubIntVlanTagEntry 9 }
END