david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/arris/CADANT-CMTS-EQUIPMENT-MIB

2236 lines
75 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CADANT-CMTS-EQUIPMENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
cadEquipment
FROM CADANT-PRODUCTS-MIB
AdminState,
CardId,
CardSubType,
CardType,
DiskVolumeUsageLevel,
DuplexStatus,
EqActionType,
FirmwareSource,
FlowControlMode,
PicType,
PortId,
PortMode,
PortDetectedMode,
PortType,
PrimaryState,
SecondaryState,
ShelfId,
UnknownState
FROM CADANT-TC
TenthdBmV
FROM DOCS-IF-MIB
InterfaceIndexOrZero
FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
Counter32,
Integer32,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
TimeTicks,
IpAddress,
Unsigned32
FROM SNMPv2-SMI
DateAndTime,
DisplayString,
MacAddress,
RowStatus,
TEXTUAL-CONVENTION,
TimeStamp,
TruthValue
FROM SNMPv2-TC;
cadEquipmentMib MODULE-IDENTITY
LAST-UPDATED "200903030000Z" -- March 3, 2009
ORGANIZATION
"Arris International, Inc."
CONTACT-INFO
"Arris Technical Support
Phone: +1 630 281 3000
E-Mail: support@arrisi.com"
DESCRIPTION
"This MIB is intended to describe all objects which are used to
control and report on the state of a Cadant CMTS. These objects
are used to perform the following functions on a Cadant CMTS:
a) provision the cards, ports, and the CMTS itself
b) run dianostic tests
c) configure auditing parameters
d) receive equipment-related traps "
REVISION "200903030000Z" -- March 3, 2009
DESCRIPTION
"Change syntax of cmIpAddress from IpAddress to OCTET STRING to handle IPv4 and v6."
REVISION "200901050000Z" -- January 5, 2009
DESCRIPTION
"Add restrictions on the size of some strings in card table."
REVISION "200810140000Z" -- October 14, 2008
DESCRIPTION
"Add shelf id back into trap messages."
REVISION "200810010000Z" -- October 1, 2008
DESCRIPTION
"Add ranges for allowable card temperatures."
REVISION "200807030000Z" -- July 3, 2008
DESCRIPTION
"Remove portGroupId since cable-mac replaced this MIB object.
Add shelfNumber to portPrStateChange, portSecStateChange and portDplxStatusChange to match the variable binding list seen on trap monitor."
REVISION "200806180000Z" -- June 18, 2008
DESCRIPTION
"Additional support for disk sizes."
REVISION "200804280000Z" -- April 28, 2008
DESCRIPTION
"Initial support for MPM carrier cards."
REVISION "200804020000Z" -- April 2, 2008
DESCRIPTION
"Support various levels of temperature warnings."
REVISION "200802250000Z" -- Feb 25, 2008
DESCRIPTION
"Allowed Event Ids to range 0x00000000 to 0xFFFFFFFF for fpgaErrorEvent Table."
REVISION "200711050000Z" -- Nov 5, 2007
DESCRIPTION
"Add port flow control parameters and remove gbic support."
REVISION "200701100000Z" -- Jan 10, 2007
DESCRIPTION
"Remove cardSwBuildTime"
REVISION "200611130000Z" -- Nov 13, 2006
DESCRIPTION
"Remove portMacPortId"
REVISION "200609120000Z" -- Sep 12, 2006
DESCRIPTION
"Change syntax of portMacPortId from MacPortId to MacPortIdWithInvalid (65536 is invalid)"
REVISION "200608230000Z" -- Aug 23, 2006
DESCRIPTION
"Add portMacPortId"
REVISION "200602140000Z"
DESCRIPTION
"Add additional variable-binding cmIpAddress cmRegistrationNotification"
REVISION "200508300000Z"
DESCRIPTION
"Add support for RCM module."
REVISION "200504060000Z"
DESCRIPTION
"Add support for CM registration notification"
REVISION "200502040000Z"
DESCRIPTION
"Add downstream power loss notification."
REVISION "200501240000Z"
DESCRIPTION
"Add last card reset reason to card table."
REVISION "200412010000Z"
DESCRIPTION
"Add downstream power visibility to port table."
REVISION "200411180000Z"
DESCRIPTION
"(1) Add 2 additional variable-bindings to cmResetClearNotification.
(2) Add 1 additional variable-binding to cmResetNotification."
REVISION "200411110000Z"
DESCRIPTION
"Add preliminary support for customized FPGA error event handling."
REVISION "200409070000Z"
DESCRIPTION
"Add cardSubType, portGroupId and portDocsIfIndex to C4 Port Primary
and Secondary Trap."
REVISION "200407230000Z"
DESCRIPTION
"(1) Modify the TEXTUAL-CONVENTION of TestId.
(2) Add diagTestId for cardTestResultNotification."
REVISION "200403220000Z"
DESCRIPTION
"Added portDescription."
REVISION "200403180000Z"
DESCRIPTION
"(1) Add support for card temperature trap control.
(2) Fix smidump error by changing diskVolumeFileName object mibtree"
REVISION "200402040000Z"
DESCRIPTION
"Add CmResetClear notification."
REVISION "200312180000Z"
DESCRIPTION
"Add support for logical uchannel port type and
preliminary support for extended gbic information."
REVISION "200303310000Z"
DESCRIPTION
"Add preliminary pic support."
REVISION "200303170000Z"
DESCRIPTION
"Add card detail support."
REVISION "200303050000Z"
DESCRIPTION
"Replacing portGroupId with portCardSubType and renaming portDPortId to portGroupId."
REVISION "200303020000Z"
DESCRIPTION
"Add card temperature monitoring."
REVISION "200301290000Z"
DESCRIPTION
"Adding portDPortId and portConnectorId objects to portTable to support 2D12U CAM."
REVISION "200212140000Z"
DESCRIPTION
"Revise audit entries. Add auditAutoScheduling and auditLogOutput control.
Remove auditResultNotification"
REVISION "200211070000Z"
DESCRIPTION
"Add support for diskVolume"
REVISION "200209250000Z"
DESCRIPTION
"Undo previous change."
REVISION "200209010000Z"
DESCRIPTION
"Make cardsubtype backward compatible."
REVISION "200205010000Z"
DESCRIPTION
"Add support for cardFpgaToCpuSendRate."
REVISION "200112281630Z"
DESCRIPTION
"Add support for cardSwBuildTime."
REVISION "200112211630Z"
DESCRIPTION
"Add support for cardUpTime."
REVISION "200110030000Z"
DESCRIPTION
"Add support for card detected trap."
REVISION "200107170000Z"
DESCRIPTION
"Add support for card sparing."
::= { cadEquipment 1 }
TestId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Used as index to Test Tables. "
SYNTAX Integer32 (1..100)
TestType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Indicates whether this is a 'Test', a 'Diagnostic',
or unknown. "
SYNTAX INTEGER {
test(1),
diagnostic(2),
unknown(3)
}
TestCommand ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" A set of commands applicable to this test. A value of
noop will do nothing. "
SYNTAX INTEGER {
noop(1),
stop(2),
disable(3),
enable(4),
runNow(5)
}
TestScheduleCommand ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" A set of periodic schedule command applicable to
this test. This is used in conjunction with the
TestSchedule and TestTime to specify the start
time of the test. If the TestSchedule value is 0,
then the test will be executed once at the time
specified by the TestTime. For any other
TestSchedule value, the test will be executed at
time specified by the TestTime and repeated
periodically base on the value specified by
TestSchedule. A value of noop will do nothing. "
SYNTAX INTEGER {
noop(1),
disable(2),
enable(3)
}
TestSchedule ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" A set of scheduling interval option applicable to this
test only if Schedule is selected. This is recommended for
hardware routine exercise (REX). The value expresses in multiple
of hours. For example: 1 hour interval, 24 hour interval, 48 hour interval.
A value of 0 indicate no scheduling option for this test."
SYNTAX Integer32
TestResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Test Result. "
SYNTAX INTEGER {
notRun(1),
inProgress(2),
pass(3),
fail(4),
inconclusive(5),
timeOut(6),
abort(7)
}
TestTransactionId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Transaction Id associated with a test or diagnostic. The EMS must populate
the value of this object to be able to correlate the test sent and the
result coming back. "
SYNTAX Integer32 (0..2147483647)
equipmentTraps OBJECT IDENTIFIER
::= { cadEquipmentMib 0 }
--
-- System General Object Group
--
systemGeneral OBJECT IDENTIFIER
::= { cadEquipmentMib 1 }
systemClock OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"CMTS local date and time displayed as
yyyy-mm-dd,hh:mm:ss.d,+/-hh:mm, where the date is yyyy-mmmm-dd and
time in deci-seconds is hh:mm:ss.d, adn teh current offset from
GMT is +/-hh:mm. This object is adjusted by teh TZ and DST rules.
E.g. 2002-5-26,13;30:15.0,-4:0"
::= { systemGeneral 1 }
trapCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the trap sequence number that increments each
time a trap is sent. It is persistent across resets. "
::= { systemGeneral 2 }
trapSeverity OBJECT-TYPE
SYNTAX INTEGER {
cleared(1),
indeterminate(2),
warning(3),
minor(4),
major(5),
critical(6),
informational(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Severity level of a Cadant trap. "
DEFVAL { cleared }
::= { systemGeneral 3 }
systemKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The systemKey is a unique string used for Candant's CMTS
identification. The EMS uses this key string as well as the
sysOid in the MIB-II system group MIB to identify Candant's
CMTS's. "
::= { systemGeneral 4 }
cardNumber OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" Card Id used in traps. A value 99 indicates an invalid cardNumber. "
DEFVAL { 99 }
::= { systemGeneral 98 }
portNumber OBJECT-TYPE
SYNTAX PortId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" Port Id used in traps. A value of 99 indicates an invalid portNumber. "
DEFVAL { 99 }
::= { systemGeneral 99 }
diskDriveNumber OBJECT-TYPE
SYNTAX Integer32 (0..99)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" Disk drive ID use in a Cadant trap. A value of 99 indicates an invalid diskDriveNumber"
DEFVAL { 99 }
::= { systemGeneral 100 }
diskVolumeNumber OBJECT-TYPE
SYNTAX Integer32 (0..99)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" Disk volume ID use in a Cadant trap. A value of 99 indicates an invalid diskVolumeNumber"
DEFVAL { 99 }
::= { systemGeneral 101 }
--
-- Shelf Object Group
--
shelfObjects OBJECT IDENTIFIER
::= { cadEquipmentMib 2 }
shelfNumber OBJECT-TYPE
SYNTAX ShelfId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" The instance identifier of a Cadant CMTS in a multi-Cadant CMTS
configuration. This shelfNumber is used in traps. A value of 99
indicates an invalid shelfNumber. "
DEFVAL { 1 }
::= { shelfObjects 1 }
shelfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" A string that represents the name of this machine and may uniquely
identify it from other network devices. "
DEFVAL { "Cadant C4 CMTS" }
::= { shelfObjects 2 }
shelfSwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software version currently executing."
::= { shelfObjects 3 }
--
-- Equipment State Object Group
--
equipmentState OBJECT IDENTIFIER
::= { cadEquipmentMib 3 }
cardLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time any of the objects
in cardTable last changed. "
::= { equipmentState 2 }
portLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time any of the objects
in portTable last changed. "
::= { equipmentState 3 }
--
-- Equipment Tables (cards and ports)
--
equipmentTbl OBJECT IDENTIFIER
::= { cadEquipmentMib 4 }
--
-- Card table
--
cardTable OBJECT-TYPE
SYNTAX SEQUENCE OF CardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of card or circuit pack information."
::= { equipmentTbl 2 }
cardEntry OBJECT-TYPE
SYNTAX CardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing pertinent information about a card or
a circuit pack. "
INDEX { cardShelfId, cardId }
::= { cardTable 1 }
CardEntry ::= SEQUENCE {
cardShelfId ShelfId,
cardId CardId,
cardName DisplayString,
cardType CardType,
cardSubType CardSubType,
cardSerialNum DisplayString,
cardFwVersion DisplayString,
cardHwVersion DisplayString,
cardSwVersion DisplayString,
cardAdminState AdminState,
cardPrState PrimaryState,
cardSecState SecondaryState,
cardDplxStatus DuplexStatus,
cardAction EqActionType,
cardTrapInh BITS,
cardNumPorts Integer32,
cardDetected CardType,
cardSubDetected CardSubType,
cardFwUpdateStatus TruthValue,
cardSpareGroupId CardId,
cardSpareGroupMode INTEGER,
cardUpTime TimeTicks,
cardTemperature Integer32,
cardCpuType DisplayString,
cardCpuSpeed Unsigned32,
cardBusSpeed Unsigned32,
cardRamSize Unsigned32,
cardFlashSize Unsigned32,
cardCPLDVersion DisplayString,
cardFpgaSource FirmwareSource,
cardBootVersion DisplayString,
cardLastBootVersion DisplayString,
cardLastBootSource FirmwareSource,
cardPicDetected PicType,
cardPicSerialNum DisplayString,
cardPicHwVersion DisplayString,
cardLastResetReason DisplayString,
cardTemperatureHighWarn Integer32,
cardTemperatureHighError Integer32,
cardCarrierSerialNum DisplayString,
cardCarrierFwVersion DisplayString,
cardCarrierHwVersion DisplayString
}
cardShelfId OBJECT-TYPE
SYNTAX ShelfId
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The unique id the shelf that contains this card."
::= { cardEntry 1 }
cardId OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique id of this card within the shelf. The
convention of cardId is as follows:
- Indices from 1 to 50 [1 - 50] are reserved for Circuit Packs.
In this case, the cardId is 1 plus the 0-based slot number.
- Indices from 51 to 98 [51 - 98] are reserved for Auxilliary Devices in within
a shelf. Auxilliary Devices or Modules could be Fan Module, Power Module,
Tape Drive and or Disc-Drive. In this case, the cardName and cardType
indentify the Auxilliary Devices. Not all of row attributes are applicable
for Auxilliary Devices. "
::= { cardEntry 2 }
cardName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the name of the card, if it has one. "
::= { cardEntry 3 }
cardType OBJECT-TYPE
SYNTAX CardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The type of card, if any. For example Ecard, Fcard, Dcard or Ucard
If the slot is empty, the value would be 'empty'. "
::= { cardEntry 4 }
cardSubType OBJECT-TYPE
SYNTAX CardSubType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The cardType alone may not be specific enough to fully describe the
type of card that is in this slot. For example, a card type of Dcard
might have a more specific type of 1D8U with integrated upconverter.
If the card needs no further specificication that the cardType, then
the value of cardSubType is 'none'. Not yet implemented. "
::= { cardEntry 5 }
cardSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the serial number of the card. "
::= { cardEntry 6 }
cardFwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the firmware or FPGA version number of the card. "
::= { cardEntry 7 }
cardHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the hardware version of the card. "
::= { cardEntry 8 }
cardSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the software version of the card. "
::= { cardEntry 9 }
cardAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the administrative state of this card. "
::= { cardEntry 12 }
cardPrState OBJECT-TYPE
SYNTAX PrimaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the primary state of this card. "
::= { cardEntry 13 }
cardSecState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the secondary state of this card. "
::= { cardEntry 14 }
cardDplxStatus OBJECT-TYPE
SYNTAX DuplexStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the duplexing status of this card. "
::= { cardEntry 15 }
cardAction OBJECT-TYPE
SYNTAX EqActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Write-only action performed on this card. "
::= { cardEntry 17 }
cardTrapInh OBJECT-TYPE
SYNTAX BITS { primary(0), secondary(1), duplex(2), detected(3),
tempoutofrange(4), tempnoreport(5), tempoverheat(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If a bit is set, the corresponding state change trap
will not be sent. "
::= { cardEntry 18 }
cardNumPorts OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of ports this card contains. "
::= { cardEntry 19 }
cardDetected OBJECT-TYPE
SYNTAX CardType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" CardType dectected automatically by the CMTS. "
::= { cardEntry 20 }
cardSubDetected OBJECT-TYPE
SYNTAX CardSubType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" CardSubType dectected automatically by the CMTS. "
::= { cardEntry 21 }
cardFwUpdateStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Set to TRUE if a firmware update is in progress or has been done,
else set to FALSE. "
DEFVAL { false }
::= { cardEntry 23 }
cardSpareGroupId OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The cardId of the spare group leader for this sparing group.
This value will be set to the invalid card id for all cards not
associated with a sparing group. "
::= { cardEntry 24 }
cardSpareGroupMode OBJECT-TYPE
SYNTAX INTEGER {
manual(1),
auto(2),
invalid(99)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The admin mode of the spare group leader for this sparing group.
This value will be set to the invalid card id for all cards not
associated with a sparing group. "
::= { cardEntry 25 }
cardUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The value of sysUpTime when the primary state for this card
made a transition from OOS to IS. "
::= { cardEntry 26 }
cardTemperature OBJECT-TYPE
SYNTAX Integer32 (-30..120|999)
UNITS "degrees Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current operational temperature of the card. "
DEFVAL { 999 }
::= { cardEntry 29 }
cardCpuType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..25))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current CPU type of the card. "
::= { cardEntry 30 }
cardCpuSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current CPU speed of the card. "
::= { cardEntry 31 }
cardBusSpeed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "hertz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current bus speed of the card. "
::= { cardEntry 32 }
cardRamSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current size of installed RAM of the card. "
::= { cardEntry 33 }
cardFlashSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current size of installed FLASH of the card. "
::= { cardEntry 34 }
cardCPLDVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current version of CPLD installed on the card. "
::= { cardEntry 35 }
cardFpgaSource OBJECT-TYPE
SYNTAX FirmwareSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The source of the running version of the FPGAs on the card. "
DEFVAL { committed }
::= { cardEntry 36 }
cardBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..90))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current versions of the boot loaders installed on the card. "
::= { cardEntry 37 }
cardLastBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The last version of the boot loader used on the card. "
::= { cardEntry 38 }
cardLastBootSource OBJECT-TYPE
SYNTAX FirmwareSource
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The source of the version of the bootloader last
used on the card. "
DEFVAL { boot1 }
::= { cardEntry 39 }
cardPicDetected OBJECT-TYPE
SYNTAX PicType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The type of PIC detected in this slot. "
DEFVAL { invalid }
::= { cardEntry 40 }
cardPicSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the serial number of the PIC. "
DEFVAL { "" }
::= { cardEntry 41 }
cardPicHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the hardware version of the PIC. "
DEFVAL { "" }
::= { cardEntry 42 }
cardLastResetReason OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The reason for the latest card recovery. "
DEFVAL { "" }
::= { cardEntry 43 }
cardTemperatureHighWarn OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees Centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The temperature of the card at which warnings are generated. "
DEFVAL { 70 }
::= { cardEntry 44 }
cardTemperatureHighError OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees Centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The temperature of the card at which recoveries are initiated. "
DEFVAL { 90 }
::= { cardEntry 45 }
cardCarrierSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the serial number of the carrier card, and valid only for DMM/MPM cards. "
DEFVAL { "" }
::= { cardEntry 46 }
cardCarrierFwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the firmware version of the carrier card, and valid only for DMM/MPM cards. "
DEFVAL { "" }
::= { cardEntry 47 }
cardCarrierHwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the hardwarer versioin of the carrier card, and valid only for DMM/MPM cards. "
DEFVAL { "" }
::= { cardEntry 48 }
--
-- Port table
--
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Ports information."
::= { equipmentTbl 3 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing pertinent information about a port
owned by a card."
INDEX { portShelfId, portCardId, portId }
::= { portTable 1 }
PortEntry ::= SEQUENCE {
portShelfId ShelfId,
portCardId CardId,
portId PortId,
portType PortType,
portAdminState AdminState,
portPrState PrimaryState,
portSecState SecondaryState,
portDplxStatus DuplexStatus,
portAction EqActionType,
portTrapInh BITS,
portNumChans Integer32,
portDocsIfIndex InterfaceIndexOrZero,
portMacAddress MacAddress,
portMode PortMode,
portDetectedMode PortDetectedMode,
portBgpId Integer32,
portConnectorId PortId,
portCardSubType CardSubType,
portDescription DisplayString,
portCurrDsPower TenthdBmV,
portMinDsPower TenthdBmV,
portMaxDsPower TenthdBmV,
portTxFlowControlMode FlowControlMode,
portRxFlowControlMode FlowControlMode,
portTxFlowControlDetected FlowControlMode,
portRxFlowControlDetected FlowControlMode,
portMacIfIndex InterfaceIndexOrZero
}
portShelfId OBJECT-TYPE
SYNTAX ShelfId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The unique id of the shelf this port belongs to."
::= { portEntry 1 }
portCardId OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique id of the card this port belongs to."
::= { portEntry 2 }
portId OBJECT-TYPE
SYNTAX PortId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique id of this port within a card.
the shelfId, the cardId and portId uniquely identify a port "
::= { portEntry 3 }
portType OBJECT-TYPE
SYNTAX PortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Type of this port. "
::= { portEntry 4 }
portAdminState OBJECT-TYPE
SYNTAX AdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Admin state of this port"
::= { portEntry 6 }
portPrState OBJECT-TYPE
SYNTAX PrimaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary state of this port"
::= { portEntry 7 }
portSecState OBJECT-TYPE
SYNTAX SecondaryState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary state of this port"
::= { portEntry 8 }
portDplxStatus OBJECT-TYPE
SYNTAX DuplexStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Duplexing status."
::= { portEntry 9 }
portAction OBJECT-TYPE
SYNTAX EqActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Write-only action performed on a Port. "
::= { portEntry 11 }
portTrapInh OBJECT-TYPE
SYNTAX BITS { primary(0), secondary(1), duplex(2),
linkUpLinkDown(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" If a bit is set, the corresponding state change trap
will not be sent. "
::= { portEntry 12 }
portNumChans OBJECT-TYPE
SYNTAX Integer32 (0..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of channels this port contains. "
::= { portEntry 13 }
portDocsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object is here just in case a Port component does
have a one to one correspondent with the IfTable. Example: D card
in Cadant's CMTS system contains 8 ports, 1 for downstream channel and
up to 3 upstream channels. Each channel will correspond to an ifIndex as
specified in the ipcdn-rf-interface-mib. In this case, this object MUST
have the same value as of ifIndex. A -1 indicates that this port does not
have an association in the Iftable. "
::= { portEntry 14 }
portMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The physical address value for this card. This value is used to
populate the ifPhysAddress field in the IfTable and other Tables in docsis RFC MIBs."
::= { portEntry 15 }
portMode OBJECT-TYPE
SYNTAX PortMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The desired operating mode of an ethernet port. Not yet implemented. "
DEFVAL { autoNegotiate }
::= { portEntry 16 }
portDetectedMode OBJECT-TYPE
SYNTAX PortDetectedMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current operating mode of an ethernet port. "
::= { portEntry 17 }
portBgpId OBJECT-TYPE
SYNTAX Integer32 (-2147483647..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The bridge group port id for this port. "
::= { portEntry 19 }
portConnectorId OBJECT-TYPE
SYNTAX PortId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" For portType = uport, the rear pic connector this port is mapped to.
Otherwise, the value of this object is invalid(99). "
DEFVAL { 99 }
::= { portEntry 20 }
portCardSubType OBJECT-TYPE
SYNTAX CardSubType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The CardSubType of the card this port belongs to."
::= { portEntry 21 }
portDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" A persistent copy of ifAlias for this interface."
::= { portEntry 27 }
portCurrDsPower OBJECT-TYPE
SYNTAX TenthdBmV
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The latest downstream power level reported by the port.
This is valid on for ports of type dport."
DEFVAL { 0 }
::= { portEntry 28 }
portMinDsPower OBJECT-TYPE
SYNTAX TenthdBmV
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The latest downstream power level reported by the port.
This is valid on for ports of type dport."
DEFVAL { 0 }
::= { portEntry 29 }
portMaxDsPower OBJECT-TYPE
SYNTAX TenthdBmV
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The latest downstream power level reported by the port.
This is valid on for ports of type dport."
DEFVAL { 0 }
::= { portEntry 30 }
portTxFlowControlMode OBJECT-TYPE
SYNTAX FlowControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The transmit flow control settings for this port (network ports only)."
DEFVAL { desired }
::= { portEntry 31 }
portRxFlowControlMode OBJECT-TYPE
SYNTAX FlowControlMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The receive flow control settings for this port (network ports only)."
DEFVAL { desired }
::= { portEntry 32 }
portTxFlowControlDetected OBJECT-TYPE
SYNTAX FlowControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The reported transmit flow control settings for this port (network ports only)."
DEFVAL { unknown }
::= { portEntry 33 }
portRxFlowControlDetected OBJECT-TYPE
SYNTAX FlowControlMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The reported receive flow control settings for this port (network ports only)."
DEFVAL { unknown }
::= { portEntry 34 }
portMacIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The MAC IfIndex currently associcated with the RF port."
DEFVAL { 0 }
::= { portEntry 35 }
--
-- Disk volume tables
--
diskVolumeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiskVolumeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of disk volume information."
::= { equipmentTbl 4 }
diskVolumeEntry OBJECT-TYPE
SYNTAX DiskVolumeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing pertinent information about a disk volume "
INDEX { diskVolumeShelfId, diskVolumeCardId, diskVolumeDriveId, diskVolumeId }
::= { diskVolumeTable 1 }
DiskVolumeEntry ::= SEQUENCE {
diskVolumeShelfId ShelfId,
diskVolumeCardId CardId,
diskVolumeDriveId Integer32,
diskVolumeId Integer32,
diskVolumeName DisplayString,
diskVolumeSize Integer32,
diskVolumeUsageLevel DiskVolumeUsageLevel,
diskVolumeUsagePercentage Integer32,
diskVolumeUsageCriticalThreshold Integer32,
diskVolumeUsageMajorThreshold Integer32,
diskVolumeUsageMinorThreshold Integer32,
diskVolumeAutoDeleteUnusedFile TruthValue,
diskVolumeTrapInh BITS,
diskVolumeDiskSize Integer32
}
diskVolumeShelfId OBJECT-TYPE
SYNTAX ShelfId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The unique id of the shelf this disk volume belongs to."
::= { diskVolumeEntry 1 }
diskVolumeCardId OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique id of the card this disk volume belongs to."
::= { diskVolumeEntry 2 }
diskVolumeDriveId OBJECT-TYPE
SYNTAX Integer32 (1..99)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique id of the disk drive this disk volume belongs to.
A value of 99 indicates an invalid disk drive"
::= { diskVolumeEntry 3 }
diskVolumeId OBJECT-TYPE
SYNTAX Integer32 (1..99)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique id of this disk volume.
the diskVolumeShelfId, the diskVolumeCardId, the diskVolumeDiskId,
and the. A value of 99 indicate an invalid volume "
::= { diskVolumeEntry 4 }
diskVolumeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the disk volume."
::= { diskVolumeEntry 5 }
diskVolumeSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The disk volume size in units of 512 bytes."
::= { diskVolumeEntry 6 }
diskVolumeUsageLevel OBJECT-TYPE
SYNTAX DiskVolumeUsageLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The disk volume usage level."
::= { diskVolumeEntry 7 }
diskVolumeUsagePercentage OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The disk volume usage percentage."
::= { diskVolumeEntry 8 }
diskVolumeUsageCriticalThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Usage percentage level when exceed will cause a
diskVolumeUsageNotification trap to be sent with
diskVolumeUsageLevel of diskVolumeUsageCritical."
DEFVAL { 90 }
::= { diskVolumeEntry 9 }
diskVolumeUsageMajorThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Usage percentage level when exceed will cause a
diskVolumeUsageNotification trap to be sent with
diskVolumeUsageLevel of diskVolumeUsageMajor."
DEFVAL { 80 }
::= { diskVolumeEntry 10 }
diskVolumeUsageMinorThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Usage percentage level when exceed will cause a
diskVolumeUsageNotification trap to be sent with
diskVolumeUsageLevel of diskVolumeUsageMinor."
DEFVAL { 70 }
::= { diskVolumeEntry 11 }
diskVolumeAutoDeleteUnusedFile OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to TRUE to the system will automatically delete
unused files when diskVolumeUsage exceed the
diskVolumeUsageCriticalThreshold value."
DEFVAL { false }
::= { diskVolumeEntry 12 }
diskVolumeTrapInh OBJECT-TYPE
SYNTAX BITS { criticalUsageLevel(0), majorUsageLevel(1),
minorUsageLevel(2), autoDeleteFiles(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a bit is set, the corresponding trap
will not be sent. "
DEFVAL { {} }
::= { diskVolumeEntry 13 }
diskVolumeDiskSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total physical disk capacity in bytes."
DEFVAL { 0 }
::= { diskVolumeEntry 14 }
diskVolumeFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The name of a file on the disk volume use for trap notification."
::= { equipmentTbl 5 }
--============= DIAGNOSTIC/TEST GROUP =================--
-- This group contains objects defined for the purpose of diagnostic and test.
-- The disctinction between diagnostic and test is that: The resource must be in
-- the OOS state before Diagnostic (DGN) can begin. Test, however, does not require the
-- resource to be OOS. In-service loop back is an example of test.
-- Test/DGN can be performed on a shelf, a card or a port. Therefore, each of them will
-- have their own test/Dgn table.
-- The EMS needs to retreive the test/dgn table to see what test or dgn are supported
-- by the element.
-- A single test/dgn consists of:
-- a TestId, a TestName, a TestDescription, a set of commands performed on the test,
-- a test scheduling options, a description of test result.
-- A test Transaction Id which is populated by the EMS to synchronize test results coming
-- back from the Agent.
-- Test result will be sent back to the EMS via a TestResultNotification trap.
--
--=======================================================--
equipmentDiag OBJECT IDENTIFIER
::= { cadEquipmentMib 5 }
--
-- CMTS diagnostic configuration
--
eqDiagConfig OBJECT IDENTIFIER
::= { equipmentDiag 1 }
remainInDiagMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to TRUE, the device being diagnosed will remain
in diagnostic state when the diagnostic test is completed.
When set to FALSE, the device will revert to its original
state when the diagnostic test is completed."
DEFVAL { true }
::= { eqDiagConfig 1 }
consoleOutput OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"If true then the diagnostic result will be displayed on the
system console. "
DEFVAL { false }
::= { eqDiagConfig 2 }
verboseLevel OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Verbose output level for diagnostic console output
display. Higher number indicate more detailed output."
DEFVAL { 2 }
::= { eqDiagConfig 3 }
diagTestId OBJECT-TYPE
SYNTAX TestId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" Test Identification Number. Used in cardTestResultNotification variable-binding"
::= { equipmentDiag 2 }
--
-- Card test table
--
cardTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF CardTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of test available for a card. "
::= { equipmentDiag 3 }
cardTestEntry OBJECT-TYPE
SYNTAX CardTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information about tests or dignostics available for
a card. "
INDEX { cardShelfTestIndex, cardTestIndex, cardTestId }
::= { cardTestTable 1 }
CardTestEntry ::= SEQUENCE {
cardShelfTestIndex ShelfId,
cardTestIndex CardId,
cardTestId TestId,
cardTestName DisplayString,
cardTestType TestType,
cardTestDescription DisplayString,
cardTestCommand TestCommand,
cardTestScheduleCommand TestScheduleCommand,
cardTestSchedule TestSchedule,
cardTestTime DateAndTime,
cardTestResult TestResult,
cardTestResultDesc DisplayString,
cardTestTransId TestTransactionId
}
cardShelfTestIndex OBJECT-TYPE
SYNTAX ShelfId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" Shelf Identification Number taken from the Shelf Table. Used as index. "
::= { cardTestEntry 1 }
cardTestIndex OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Card Identification Number taken from the CardTable. Used as index. "
::= { cardTestEntry 2 }
cardTestId OBJECT-TYPE
SYNTAX TestId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Test Identification Number. Used as index to test table "
::= { cardTestEntry 3 }
cardTestName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..100))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" A unique name for this test."
::= { cardTestEntry 4 }
cardTestType OBJECT-TYPE
SYNTAX TestType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Test Type."
DEFVAL { unknown }
::= { cardTestEntry 5 }
cardTestDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" A short description of the test. "
::= { cardTestEntry 6 }
cardTestCommand OBJECT-TYPE
SYNTAX TestCommand
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Command to be execute this test on this shelf "
DEFVAL { noop }
::= { cardTestEntry 7 }
cardTestScheduleCommand OBJECT-TYPE
SYNTAX TestScheduleCommand
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Schedule Command to be execute this test on this shelf "
DEFVAL { noop }
::= { cardTestEntry 8 }
cardTestSchedule OBJECT-TYPE
SYNTAX TestSchedule
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Test Scheduling. "
DEFVAL { 0 }
::= { cardTestEntry 9 }
cardTestTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Test start time. "
::= { cardTestEntry 10 }
cardTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Result of the test. "
DEFVAL { notRun }
::= { cardTestEntry 11 }
cardTestResultDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional information of the test result. "
::= { cardTestEntry 12 }
cardTestTransId OBJECT-TYPE
SYNTAX TestTransactionId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Test transaction Id. "
::= { cardTestEntry 13 }
--
-- Audit configuration
--
equipmentAudit OBJECT IDENTIFIER
::= { cadEquipmentMib 6 }
auditAutoScheduling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable or disable automatic audit execution. "
DEFVAL { true }
::= { equipmentAudit 1 }
auditLogOutput OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable or disable logging of error entries to system log. "
DEFVAL { true }
::= { equipmentAudit 2 }
auditLogThrottle OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable or disable audit log output throttling to prevent
audit errors from flooding the log. "
DEFVAL { true }
::= { equipmentAudit 3 }
auditTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of test available for a card. "
::= { equipmentAudit 4 }
auditEntry OBJECT-TYPE
SYNTAX AuditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A conceptual row contains information about Audits. "
INDEX { auditShelfId, auditCardId, auditId }
::= { auditTable 1 }
AuditEntry ::= SEQUENCE {
auditShelfId ShelfId,
auditCardId CardId,
auditId Unsigned32,
auditName DisplayString,
auditDescription DisplayString,
auditTime DateAndTime,
auditCommand INTEGER,
auditStatus INTEGER,
auditResult INTEGER,
auditPassedCount Unsigned32,
auditFailedCount Unsigned32,
auditCycleCount Unsigned32,
auditTotalPassedCount Unsigned32,
auditTotalFailedCount Unsigned32
}
auditShelfId OBJECT-TYPE
SYNTAX ShelfId
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
" Shelf Identification Number taken from the Shelf Table. Used as index. "
::= { auditEntry 1 }
auditCardId OBJECT-TYPE
SYNTAX CardId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Card Identification Number taken from the CardTable. Used as index. "
::= { auditEntry 2 }
auditId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Unique ID of the internal Audit "
::= { auditEntry 3 }
auditName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Name of the internal Audit "
::= { auditEntry 4 }
auditDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the Audit "
::= { auditEntry 5 }
auditTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Start time of the audit. "
::= { auditEntry 6 }
auditCommand OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
runnow(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Audit Commands. The runnow command will stop the currently running
audit sequence and start executing requested audit immediated. If
enabled, automatic audit schedule will be restarted."
DEFVAL { enable }
::= { auditEntry 7 }
auditStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Audit status. "
::= { auditEntry 8 }
auditResult OBJECT-TYPE
SYNTAX INTEGER {
passed(1),
failed(2),
abort(4),
notRun(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Audit Result. "
::= { auditEntry 9 }
auditPassedCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of passed entry during previous audit run. "
::= { auditEntry 10 }
auditFailedCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of failed entry during previous audit run. "
::= { auditEntry 11 }
auditCycleCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of audit run completed. "
::= { auditEntry 12 }
auditTotalPassedCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of cumulative passed entry of all audit runs. "
::= { auditEntry 13 }
auditTotalFailedCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of cumulative failed entry of all audit runs. "
::= { auditEntry 14 }
--
-- Cablemodem status notifications
--
cmDevice OBJECT IDENTIFIER
::= { cadEquipmentMib 8 }
cmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address for the cable modem"
::= { cmDevice 1 }
cmVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The vendor name of the cable modem"
::= { cmDevice 2 }
cmResetReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The reason for the cable modem to reset"
::= { cmDevice 3 }
cmUChannelID OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The CMTS upstream channel ID which is connected to the cable modem"
::= { cmDevice 4 }
cmPrimarySID OBJECT-TYPE
SYNTAX Unsigned32 (0..16383)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The primary Service Identifier (SID) assigned by the CMTS associated with the cable modem"
::= { cmDevice 5 }
cmResetStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The cable modem status before it resets"
::= { cmDevice 6 }
cmResetUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This value indicates how long in hundreds of seconds the cable modem
is up since it is initial ranged"
::= { cmDevice 7 }
cmResetInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The additional information for the cable modem to reset"
::= { cmDevice 8 }
cmIpAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4 | 16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The IP Address of the cable modem"
::= { cmDevice 9 }
--
-- FPGA Error Event configuration
--
equipmentError OBJECT IDENTIFIER
::= { cadEquipmentMib 9 }
fpgaErrorEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF FpgaErrorEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Overrides default handling of FPGA error events."
::= { equipmentError 1 }
fpgaErrorEventEntry OBJECT-TYPE
SYNTAX FpgaErrorEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information about FPGA error event handling."
INDEX { cardId, errEventId }
::= { fpgaErrorEventTable 1 }
FpgaErrorEventEntry ::= SEQUENCE {
errEventId Unsigned32,
errEvRecoveryEnabled TruthValue,
errEvLoggingEnabled TruthValue,
errEvLogLevel Integer32,
errEvRowStatus RowStatus
}
errEventId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Event ID associated with the FPGA error. A row in
this table defines behavior for a specific FPGA error
that overrides the default behavior of the system. "
::= { fpgaErrorEventEntry 1 }
errEvRecoveryEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" If true, the card can be recovered when this FPGA error
is detected. When the card is recovered depends on the
setting of errEvRecoveryThreshold. If this value is false,
the card will not be recovered when this error is detected. "
DEFVAL { true }
::= { fpgaErrorEventEntry 2 }
errEvLoggingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" If true, the card will provide notification of the
occurance of the this error. When the notification
occurs is dependent on the setting of
errEvLogThrottleThreshold. The severity of the notification
is determined by the setting of errEvLogLevel. "
DEFVAL { true }
::= { fpgaErrorEventEntry 3 }
errEvLogLevel OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" If errEvLoggingEnabled is true, this setting sets the
severity level of the generated notification. In
general, higher values indicate lower severity. "
DEFVAL { 4 }
::= { fpgaErrorEventEntry 4 }
errEvRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The only set actions supported on this table are
createAndGo(4) and destroy(6). "
::= { fpgaErrorEventEntry 5 }
--
-- Arris Equipment MIB conformance statements
--
cadEquipmentMibConformance OBJECT IDENTIFIER
::= { cadEquipmentMib 10 }
cadEquipmentMibCompliances OBJECT IDENTIFIER
::= { cadEquipmentMibConformance 1 }
cadEquipmentMibGroup OBJECT IDENTIFIER
::= { cadEquipmentMibConformance 2 }
--
-- Equipment state change notifications
--
cardPrStateChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
cardType, cardSubType, cardPrState }
STATUS current
DESCRIPTION
" This trap is sent whenever the card's Primary
state changes. "
::= { equipmentTraps 5 }
cardSecStateChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
cardType, cardSubType, cardSecState }
STATUS current
DESCRIPTION
" This trap is sent whenever the card's Secondary
state changes. "
::= { equipmentTraps 6 }
cardDetectedChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
cardDetected, cardSubDetected }
STATUS current
DESCRIPTION
" This trap is sent whenever a new card is detected. "
::= { equipmentTraps 7 }
cardDplxStatusChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
cardType, cardSubType, cardDplxStatus }
STATUS current
DESCRIPTION
" This trap is sent whenever the card's Duplex
status changes. "
::= { equipmentTraps 8 }
portPrStateChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
portNumber, portType, portPrState, portCardSubType,
portDocsIfIndex }
STATUS current
DESCRIPTION
" This trap is sent whenever the port's Primary
state changes. "
::= { equipmentTraps 9 }
portSecStateChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
portNumber, portType, portSecState, portCardSubType,
portDocsIfIndex }
STATUS current
DESCRIPTION
" This trap is sent whenever the port's Secondary
state changes. "
::= { equipmentTraps 10 }
portDplxStatusChange NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
portNumber, portType, cardDplxStatus }
STATUS current
DESCRIPTION
" This trap is sent whenever the port's Duplex
status changes. "
::= { equipmentTraps 11 }
cardTestResultNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity,shelfNumber, cardNumber,
diagTestId, cardTestName, cardTestResult,
cardTestResultDesc, cardTestTransId }
STATUS current
DESCRIPTION
" This trap is sent when a test or diagnostic completed on a card. "
::= { equipmentTraps 13 }
cmResetClearNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, systemClock, trapSeverity, cmMacAddress,
cmUChannelID, cardNumber }
STATUS current
DESCRIPTION
" This trap is sent when a CM is on-line from previous flap."
::= { equipmentTraps 15 }
--
-- Cablemodem reset definition
--
cmResetNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, systemClock, trapSeverity, cmMacAddress,
cmVendor, cmResetReason, cmUChannelID, cmPrimarySID,
cmResetStatus, cmResetUpTime, cardNumber, cmResetInfo }
STATUS current
DESCRIPTION
" This trap is sent when a CM is reset."
::= { equipmentTraps 16 }
diskVolumeUsageNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
diskDriveNumber, diskVolumeNumber,
diskVolumeUsageLevel, diskVolumeName }
STATUS current
DESCRIPTION
"This trap is sent when a disk volume usage level
exceed a disk usage threshold."
::= { equipmentTraps 17 }
diskVolumeAutoDeleteFileNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, shelfNumber, cardNumber,
diskDriveNumber, diskVolumeNumber, diskVolumeName,
diskVolumeFileName }
STATUS current
DESCRIPTION
"This trap is sent when a file is automatically
deleted by the system in respond to disk volume
usage exceed critical thresholh."
::= { equipmentTraps 18 }
cardTempOutOfRangeNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, cardNumber }
STATUS current
DESCRIPTION
"This trap is sent when the card temperature is out of range."
::= { equipmentTraps 19 }
cardTempNoReportNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, cardNumber }
STATUS current
DESCRIPTION
"This trap is sent when there is no reporting on card temperature."
::= { equipmentTraps 20 }
cardTempOverHeatNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, cardNumber }
STATUS current
DESCRIPTION
"This trap is sent when the card is overheat, card is being shut down."
::= { equipmentTraps 21 }
downstreamPowerLoss NOTIFICATION-TYPE
OBJECTS { trapCounter, trapSeverity, cardNumber, portNumber }
STATUS current
DESCRIPTION
" This trap is sent when c4 detects the loss of downstream power."
::= { equipmentTraps 22 }
--
-- Cablemodem registration definition
--
cmRegistrationNotification NOTIFICATION-TYPE
OBJECTS { trapCounter, systemClock, trapSeverity, cmMacAddress,
cmVendor, cmUChannelID, cardNumber, cmIpAddress }
STATUS current
DESCRIPTION
" This trap is sent when a CM is registered."
::= { equipmentTraps 23 }
--
-- MIB conformance object groups
--
systemGeneralGroup OBJECT-GROUP
OBJECTS { systemClock, trapCounter, trapSeverity, systemKey }
STATUS current
DESCRIPTION
" This group contains a collection of objects general to the overall
system. "
::= { cadEquipmentMibGroup 1 }
equipmentStateGroup OBJECT-GROUP
OBJECTS { cardLastChangeTime, portLastChangeTime }
STATUS current
DESCRIPTION
" This group contains a collection of objects general to the state
of the equipments. "
::= { cadEquipmentMibGroup 2 }
equipmentShelfGroup OBJECT-GROUP
OBJECTS { shelfName, shelfSwVersion }
STATUS current
DESCRIPTION
" This group contains a collection of objects general specific to shelf
objects. "
::= { cadEquipmentMibGroup 3 }
equipmentCardGroup OBJECT-GROUP
OBJECTS { cardName, cardType, cardSubType, cardSerialNum,
cardFwVersion, cardHwVersion, cardSwVersion,
cardAdminState, cardPrState, cardSecState,
cardDplxStatus, cardAction,
cardTrapInh, cardNumPorts, cardDetected,
cardSubDetected, cardFwUpdateStatus, cardSpareGroupId,
cardSpareGroupMode, cardUpTime, cardTemperature,
cardCpuType, cardCpuSpeed, cardBusSpeed, cardRamSize,
cardFlashSize, cardCPLDVersion, cardFpgaSource,
cardBootVersion, cardLastBootVersion,
cardLastBootSource, cardPicDetected, cardPicSerialNum,
cardPicHwVersion, cardTemperatureHighWarn, cardTemperatureHighError }
STATUS current
DESCRIPTION
" This group contains a collection of objects general specific to Card
table. "
::= { cadEquipmentMibGroup 4 }
equipmentPortGroup OBJECT-GROUP
OBJECTS { portType, portAdminState, portPrState, portSecState,
portDplxStatus, portAction,
portTrapInh, portNumChans, portMacAddress, portMode,
portDetectedMode, portDocsIfIndex, portBgpId,
portConnectorId, portCardSubType,
portDescription, portCurrDsPower, portMinDsPower, portMaxDsPower,
portTxFlowControlMode, portRxFlowControlMode,
portTxFlowControlDetected, portRxFlowControlDetected }
STATUS current
DESCRIPTION
" This group contains a collection of objects specific to Port table. "
::= { cadEquipmentMibGroup 5 }
equipmentDiagGroup OBJECT-GROUP
OBJECTS { remainInDiagMode, verboseLevel }
STATUS current
DESCRIPTION
" This group contains a collection of objects specific to equipment diagnostics. "
::= { cadEquipmentMibGroup 6 }
equipmentCardTestGroup OBJECT-GROUP
OBJECTS { cardTestName, cardTestType, cardTestDescription,
cardTestCommand, cardTestScheduleCommand,
cardTestSchedule, cardTestTime, cardTestResult,
cardTestResultDesc, cardTestTransId }
STATUS current
DESCRIPTION
" This group contains a collection of objects specific to card Test group "
::= { cadEquipmentMibGroup 8 }
equipmentAuditGroup OBJECT-GROUP
OBJECTS { auditAutoScheduling, auditLogOutput, auditLogThrottle,
auditName, auditDescription, auditTime, auditCommand,
auditStatus, auditResult, auditPassedCount,
auditFailedCount, auditCycleCount,
auditTotalPassedCount, auditTotalFailedCount }
STATUS current
DESCRIPTION
" This group contains a collection of objects specific audit group. "
::= { cadEquipmentMibGroup 10 }
diskVolumeGroup OBJECT-GROUP
OBJECTS { diskVolumeName, diskVolumeSize, diskVolumeUsageLevel,
diskVolumeUsagePercentage,
diskVolumeUsageCriticalThreshold,
diskVolumeUsageMajorThreshold,
diskVolumeUsageMinorThreshold,
diskVolumeAutoDeleteUnusedFile, diskVolumeTrapInh,
diskVolumeFileName }
STATUS current
DESCRIPTION
" This group contains a collection of objects specific to disk volume objects. "
::= { cadEquipmentMibGroup 11 }
fpgaErrorEventGroup OBJECT-GROUP
OBJECTS { errEvRecoveryEnabled, errEvLoggingEnabled,
errEvLogLevel }
STATUS current
DESCRIPTION
" This group contains a collection of objects dealing with FPGA errors. "
::= { cadEquipmentMibGroup 12 }
cadEquipmentMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the Equipment MIB. "
MODULE -- this module
MANDATORY-GROUPS { systemGeneralGroup,
equipmentStateGroup, equipmentShelfGroup,
equipmentCardGroup, equipmentPortGroup,
equipmentDiagGroup, equipmentCardTestGroup,
equipmentAuditGroup,
diskVolumeGroup, fpgaErrorEventGroup }
::= { cadEquipmentMibCompliances 1 }
END -- end of module CADANT-CMTS-EQUIPMENT-MIB.
Reference in New Issue Copy Permalink