david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/arris/DOCS-BPI2-MIB

3219 lines
114 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
DOCS-BPI2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32,
Integer32
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
TEXTUAL-CONVENTION,
MacAddress,
RowStatus,
TruthValue,
DateAndTime
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
docsIfMib
FROM DOCS-IF-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
;
docsBpi2MIB MODULE-IDENTITY
LAST-UPDATED "200104170000Z"
ORGANIZATION "IETF IPCDN Working Group"
CONTACT-INFO "---------------------------------------
Stuart M. Green
Postal:
Arris Interactive / Nortel Networks
6 Riverside Drive
Andover, MA 01810
U.S.A.
Tel: +1 978 946 4664
Fax: +1 978 946 4800
E-mail: stu.green@ne.arris-i.com
---------------------------------------
Kaz Ozawa
Postal:
Cable Television Laboratories
400 Centennial Parkway
Louisville, CO 80027
U.S.A.
Tel: +1 303 661 3860
Fax: +1 303 661 9199
E-mail: k.ozawa@cablelabs.com
---------------------------------------
Rich Woundy (BPI MIB)
Postal:
Cisco Systems
300 Apollo Drive
Chelmsford, MA 01824
U.S.A.
Tel: +1 978 244 8545
Fax: +1 978 244 8917
E-mail: rwoundy@cisco.com
IETF IPCDN Working Group
General Discussion: ipcdn@ietf.org
Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
Co-chairs: Richard Woundy, rwoundy@cisco.com
Andrew Valentine, a.valentine@eu.hns.com"
DESCRIPTION
"This is the MIB Module for the DOCSIS Baseline Privacy
Plus Interface (BPI+) at cable modems (CMs) and cable modem
termination systems (CMTSs)."
REVISION "200104170000Z"
DESCRIPTION
"Modified CM and CMTS IP Multicast table indexing in
preparation for IPV6. Obsoleted grace time objects
from the CMTS portion of the MIB."
REVISION "200011171930Z"
DESCRIPTION
"Replaced DisplayString type with SnmpAdminString type.
Several object descriptions were also changed."
::= { docsIfMib 6 }
-- Textual conventions
X509Certificate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An X509 digital certificate encoded as an ASN.1 DER
object."
SYNTAX OCTET STRING (SIZE (0..1400))
docsBpi2MIBObjects OBJECT IDENTIFIER ::= { docsBpi2MIB 1 }
-- Cable Modem Group
docsBpi2CmObjects OBJECT IDENTIFIER ::= { docsBpi2MIBObjects 1 }
--
-- The BPI+ base and authorization table for CMs, indexed by ifIndex
--
docsBpi2CmBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the basic and authorization
related Baseline Privacy Plus attributes of each CM MAC
interface."
::= { docsBpi2CmObjects 1 }
docsBpi2CmBaseEntry OBJECT-TYPE
SYNTAX DocsBpi2CmBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one CM MAC interface. An entry in this table exists for each
ifEntry with an ifType of docsCableMaclayer(127)."
INDEX { ifIndex }
::= { docsBpi2CmBaseTable 1 }
DocsBpi2CmBaseEntry ::= SEQUENCE {
docsBpi2CmPrivacyEnable TruthValue,
docsBpi2CmPublicKey OCTET STRING,
docsBpi2CmAuthState INTEGER,
docsBpi2CmAuthKeySequenceNumber Integer32,
docsBpi2CmAuthExpiresOld DateAndTime,
docsBpi2CmAuthExpiresNew DateAndTime,
docsBpi2CmAuthReset TruthValue,
docsBpi2CmAuthGraceTime Integer32,
docsBpi2CmTEKGraceTime Integer32,
docsBpi2CmAuthWaitTimeout Integer32,
docsBpi2CmReauthWaitTimeout Integer32,
docsBpi2CmOpWaitTimeout Integer32,
docsBpi2CmRekeyWaitTimeout Integer32,
docsBpi2CmAuthRejectWaitTimeout Integer32,
docsBpi2CmSAMapWaitTimeout Integer32,
docsBpi2CmSAMapMaxRetries Integer32,
docsBpi2CmAuthentInfos Counter32,
docsBpi2CmAuthRequests Counter32,
docsBpi2CmAuthReplies Counter32,
docsBpi2CmAuthRejects Counter32,
docsBpi2CmAuthInvalids Counter32,
docsBpi2CmAuthRejectErrorCode INTEGER,
docsBpi2CmAuthRejectErrorString SnmpAdminString,
docsBpi2CmAuthInvalidErrorCode INTEGER,
docsBpi2CmAuthInvalidErrorString SnmpAdminString
}
docsBpi2CmPrivacyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies whether this CM is
provisioned to run Baseline Privacy Plus."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1."
::= { docsBpi2CmBaseEntry 1 }
docsBpi2CmPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (74|106|140|204|270))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is a DER-encoded
RSAPublicKey ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1) [10], corresponding to the
public key of the CM. The 74, 106, 140, 204, and 270 byte key
encoding lengths correspond to 512 bit, 768 bit, 1024 bit,
1536 bit, and 2048 public moduli respectively."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.4."
::= { docsBpi2CmBaseEntry 2 }
docsBpi2CmAuthState OBJECT-TYPE
SYNTAX INTEGER {
start(1),
authWait(2),
authorized(3),
reauthWait(4),
authRejectWait(5),
silent(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the state of the CM
authorization FSM. The start state indicates that FSM is in
its initial state."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.2.1."
::= { docsBpi2CmBaseEntry 3 }
docsBpi2CmAuthKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent
authorization key sequence number for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.10."
::= { docsBpi2CmBaseEntry 4 }
docsBpi2CmAuthExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the immediate predecessor of the most recent
authorization key for this FSM. If this FSM has only one
authorization key, then the value is the time of activation
of this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmBaseEntry 5 }
docsBpi2CmAuthExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the most recent authorization key for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmBaseEntry 6 }
docsBpi2CmAuthReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to TRUE generates a Reauthorize
event in the authorization FSM. Reading this object always
returns FALSE."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.2.3.4."
::= { docsBpi2CmBaseEntry 7 }
docsBpi2CmAuthGraceTime OBJECT-TYPE
SYNTAX Integer32 (1..6047999)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the grace time for an
authorization key. A CM is expected to start trying to get a
new authorization key beginning AuthGraceTime seconds before
the authorization key actually expires."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.3."
::= { docsBpi2CmBaseEntry 8 }
docsBpi2CmTEKGraceTime OBJECT-TYPE
SYNTAX Integer32 (1..302399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the grace time for
the TEK in seconds. The CM is expected to start trying to
acquire a new TEK beginning TEK GraceTime seconds before
the expiration of the most recent TEK."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.6."
::= { docsBpi2CmBaseEntry 9 }
docsBpi2CmAuthWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Authorize Wait
Timeout."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.1."
::= { docsBpi2CmBaseEntry 10 }
docsBpi2CmReauthWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..30)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Reauthorize Wait
Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.2."
::= { docsBpi2CmBaseEntry 11 }
docsBpi2CmOpWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Operational Wait
Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.4."
::= { docsBpi2CmBaseEntry 12 }
docsBpi2CmRekeyWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Rekey Wait Timeout
in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.5."
::= { docsBpi2CmBaseEntry 13 }
docsBpi2CmAuthRejectWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Authorization Reject
Wait Timeout in seconds."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.7."
::= { docsBpi2CmBaseEntry 14 }
docsBpi2CmSAMapWaitTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the retransmission
interval, in seconds, of SA Map Requests from the MAP Wait
state."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.8."
::= { docsBpi2CmBaseEntry 15 }
docsBpi2CmSAMapMaxRetries OBJECT-TYPE
SYNTAX Integer32 (0..10)
UNITS "count"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the maximum number of
Map Request retries allowed."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.9."
::= { docsBpi2CmBaseEntry 16 }
docsBpi2CmAuthentInfos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has transmitted an Authentication Information message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.9."
::= { docsBpi2CmBaseEntry 17 }
docsBpi2CmAuthRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has transmitted an Authorization Request message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.1."
::= { docsBpi2CmBaseEntry 18 }
docsBpi2CmAuthReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received an Authorization Reply message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2."
::= { docsBpi2CmBaseEntry 19 }
docsBpi2CmAuthRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received an Authorization Reject message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.3."
::= { docsBpi2CmBaseEntry 20 }
docsBpi2CmAuthInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received an Authorization Invalid message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.7."
::= { docsBpi2CmBaseEntry 21 }
docsBpi2CmAuthRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unauthorizedSaid(4),
permanentAuthorizationFailure(8),
timeOfDayNotAcquired(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in most recent Authorization
Reject message received by the CM. This has value unknown(2)
if the last Error-Code value was 0, and none(1) if no
Authorization Reject message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.15."
::= { docsBpi2CmBaseEntry 22 }
docsBpi2CmAuthRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
most recent Authorization Reject message received by the CM.
This is a zero length string if no Authorization Reject
message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.6."
::= { docsBpi2CmBaseEntry 23 }
docsBpi2CmAuthInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unsolicited(5),
invalidKeySequence(6),
keyRequestAuthenticationFailure(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in most recent Authorization
Invalid message received by the CM. This has value unknown(2)
if the last Error-Code value was 0, and none(1) if no
Authorization Invalid message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.15."
::= { docsBpi2CmBaseEntry 24 }
docsBpi2CmAuthInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
most recent Authorization Invalid message received by the CM.
This is a zero length string if no Authorization Invalid
message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.6."
::= { docsBpi2CmBaseEntry 25 }
--
-- The CM TEK Table, indexed by ifIndex and SAID
--
docsBpi2CmTEKTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of each CM
Traffic Encryption Key(TEK) association. The CM maintains (no
more than) one TEK association per SAID per CM MAC interface."
::= { docsBpi2CmObjects 2 }
docsBpi2CmTEKEntry OBJECT-TYPE
SYNTAX DocsBpi2CmTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the TEK
association attributes of one SAID. The CM MUST create one
entry per SAID, regardless of whether the SAID was obtained
from a Registration Response message, from an Authorization
Reply message, or from any dynamic SAID establishment
mechanisms."
INDEX { ifIndex, docsBpi2CmTEKSAId }
::= { docsBpi2CmTEKTable 1 }
DocsBpi2CmTEKEntry ::= SEQUENCE {
docsBpi2CmTEKSAId Integer32,
docsBpi2CmTEKSAType INTEGER,
docsBpi2CmTEKDataEncryptAlg INTEGER,
docsBpi2CmTEKDataAuthentAlg INTEGER,
docsBpi2CmTEKState INTEGER,
docsBpi2CmTEKKeySequenceNumber Integer32,
docsBpi2CmTEKExpiresOld DateAndTime,
docsBpi2CmTEKExpiresNew DateAndTime,
docsBpi2CmTEKKeyRequests Counter32,
docsBpi2CmTEKKeyReplies Counter32,
docsBpi2CmTEKKeyRejects Counter32,
docsBpi2CmTEKInvalids Counter32,
docsBpi2CmTEKAuthPends Counter32,
docsBpi2CmTEKKeyRejectErrorCode INTEGER,
docsBpi2CmTEKKeyRejectErrorString SnmpAdminString,
docsBpi2CmTEKInvalidErrorCode INTEGER,
docsBpi2CmTEKInvalidErrorString SnmpAdminString
}
docsBpi2CmTEKSAId OBJECT-TYPE
SYNTAX Integer32 (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is the DOCSIS Security
Association ID (SAID)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.12."
::= { docsBpi2CmTEKEntry 1 }
docsBpi2CmTEKSAType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
static(2),
dynamic(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the type of security
association."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmTEKEntry 2 }
docsBpi2CmTEKDataEncryptAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm being utilized."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmTEKEntry 3 }
docsBpi2CmTEKDataAuthentAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm being utilized."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmTEKEntry 4 }
docsBpi2CmTEKState OBJECT-TYPE
SYNTAX INTEGER {
start(1),
opWait(2),
opReauthWait(3),
operational(4),
rekeyWait(5),
rekeyReauthWait(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the state of the
indicated TEK FSM. The start(1) state indicates that FSM is
in its initial state."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.3.1."
::= { docsBpi2CmTEKEntry 5 }
docsBpi2CmTEKKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent TEK
key sequence number for this TEK FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.2.10 and 4.2.2.13."
::= { docsBpi2CmTEKEntry 6 }
docsBpi2CmTEKExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the immediate predecessor of the most recent TEK
for this FSM. If this FSM has only one TEK, then the value is
the time of activation of this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmTEKEntry 7 }
docsBpi2CmTEKExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time for
expiration of the most recent TEK for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmTEKEntry 8 }
docsBpi2CmTEKKeyRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has transmitted a Key Request message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.4."
::= { docsBpi2CmTEKEntry 9 }
docsBpi2CmTEKKeyReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received a Key Reply message, including a message whose
authentication failed."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.5."
::= { docsBpi2CmTEKEntry 10 }
docsBpi2CmTEKKeyRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received a Key Reject message, including a message whose
authentication failed."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.6."
::= { docsBpi2CmTEKEntry 11 }
docsBpi2CmTEKInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the CM
has received a TEK Invalid message, including a message whose
authentication failed."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.8."
::= { docsBpi2CmTEKEntry 12 }
docsBpi2CmTEKAuthPends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times an
Authorization Pending (Auth Pend) event occurred in this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.3.3.3."
::= { docsBpi2CmTEKEntry 13 }
docsBpi2CmTEKKeyRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedSaid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in most recent Key Reject
message received by the CM. This has value unknown(2) if the
last Error-Code value was 0, and none(1) if no Key Reject
message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.6 and 4.2.2.15."
::= { docsBpi2CmTEKEntry 14 }
docsBpi2CmTEKKeyRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
most recent Key Reject message received by the CM. This is a
zero length string if no Key Reject message has been received
since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.6 and 4.2.2.6."
::= { docsBpi2CmTEKEntry 15 }
docsBpi2CmTEKInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
invalidKeySequence(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in most recent TEK Invalid
message received by the CM. This has value unknown(2) if the
last Error-Code value was 0, and none(1) if no TEK Invalid
message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.8 and 4.2.2.15."
::= { docsBpi2CmTEKEntry 16 }
docsBpi2CmTEKInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
most recent TEK Invalid message received by the CM. This is a
zero length string if no TEK Invalid message has been received
since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.8 and 4.2.2.6."
::= { docsBpi2CmTEKEntry 17 }
--
-- The CM Multicast Objects Group
--
docsBpi2CmMulticastObjects OBJECT IDENTIFIER
::= { docsBpi2CmObjects 3 }
--
-- The CM Dynamic IP Multicast Mapping Table, indexed by
-- docsBpi2CmIpMulticastIndex and by ifindex
--
docsBpi2CmIpMulticastMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps multicast IP addresses to SAIDs.
It is intended to map multicast IP addresses associated
with SA MAP Request messages."
::= { docsBpi2CmMulticastObjects 1 }
docsBpi2CmIpMulticastMapEntry OBJECT-TYPE
SYNTAX DocsBpi2CmIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the mapping of
one multicast IP address to one SAID, as well as
associated state, message counters, and error information."
INDEX { ifIndex, docsBpi2CmIpMulticastIndex }
::= { docsBpi2CmIpMulticastMapTable 1 }
DocsBpi2CmIpMulticastMapEntry ::= SEQUENCE {
docsBpi2CmIpMulticastIndex Integer32,
docsBpi2CmIpMulticastAddressType InetAddressType,
docsBpi2CmIpMulticastAddress InetAddress,
docsBpi2CmIpMulticastSAId Integer32,
docsBpi2CmIpMulticastSAMapState INTEGER,
docsBpi2CmIpMulticastSAMapRequests Counter32,
docsBpi2CmIpMulticastSAMapReplies Counter32,
docsBpi2CmIpMulticastSAMapRejects Counter32,
docsBpi2CmIpMulticastSAMapRejectErrorCode INTEGER,
docsBpi2CmIpMulticastSAMapRejectErrorString SnmpAdminString
}
docsBpi2CmIpMulticastIndex OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this row."
::= { docsBpi2CmIpMulticastMapEntry 1 }
docsBpi2CmIpMulticastAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of internet address for
docsBpi2CmIpMulticastAddress."
::= { docsBpi2CmIpMulticastMapEntry 2 }
docsBpi2CmIpMulticastAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the IP multicast address
to be mapped."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 5.4."
::= { docsBpi2CmIpMulticastMapEntry 3 }
docsBpi2CmIpMulticastSAId OBJECT-TYPE
SYNTAX Integer32 (0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the SAID to which the IP
multicast address has been mapped. If no SA Map Reply has
been received for the IP address, this object should have the
value 0."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.12."
::= { docsBpi2CmIpMulticastMapEntry 4 }
docsBpi2CmIpMulticastSAMapState OBJECT-TYPE
SYNTAX INTEGER {
start(1),
mapWait(2),
mapped(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the state of the SA
Mapping FSM for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 5.3.1."
::= { docsBpi2CmIpMulticastMapEntry 5 }
docsBpi2CmIpMulticastSAMapRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CM has transmitted an SA Map Request message for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.10."
::= { docsBpi2CmIpMulticastMapEntry 6 }
docsBpi2CmIpMulticastSAMapReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CM has received an SA Map Reply message for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.11."
::= { docsBpi2CmIpMulticastMapEntry 7 }
docsBpi2CmIpMulticastSAMapRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CM has received an SA MAP Reject message for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.12."
::= { docsBpi2CmIpMulticastMapEntry 8 }
docsBpi2CmIpMulticastSAMapRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
noAuthForRequestedDSFlow(9),
dsFlowNotMappedToSA(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent SA Map
Reject message sent in response to an SA Map Request for this
IP. It has value unknown(2) if the last Error-Code value
was 0, and none(1) if no SA MAP Reject message has been
received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.15."
::= { docsBpi2CmIpMulticastMapEntry 9 }
docsBpi2CmIpMulticastSAMapRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
the most recent SA Map Reject message sent in response to an
SA Map Request for this IP. It is a zero length string if
no SA Map Reject message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.6."
::= { docsBpi2CmIpMulticastMapEntry 10 }
--
-- CM Cert Objects
--
docsBpi2CmCertObjects OBJECT IDENTIFIER
::= { docsBpi2CmObjects 4 }
--
-- CM Device Cert Table
--
docsBpi2CmDeviceCertTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmDeviceCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the Baseline Privacy Plus
device certificates for each CM MAC interface."
::= { docsBpi2CmCertObjects 1 }
docsBpi2CmDeviceCertEntry OBJECT-TYPE
SYNTAX DocsBpi2CmDeviceCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the device certificates of
one CM MAC interface. An entry in this table exists for each
ifEntry with an ifType of docsCableMaclayer(127)."
INDEX { ifIndex }
::= { docsBpi2CmDeviceCertTable 1 }
DocsBpi2CmDeviceCertEntry ::= SEQUENCE {
docsBpi2CmDeviceCmCert X509Certificate,
docsBpi2CmDeviceManufCert X509Certificate
}
docsBpi2CmDeviceCmCert OBJECT-TYPE
SYNTAX X509Certificate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The X509 DER-encoded cable modem certificate.
Note: This object can be set only when the value is the null
string. Once the object contains the certificate, its access
MUST be read-only."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.1."
::= { docsBpi2CmDeviceCertEntry 1 }
docsBpi2CmDeviceManufCert OBJECT-TYPE
SYNTAX X509Certificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The X509 DER-encoded manufacturer certificate which
signed the cable modem certificate."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.1."
::= { docsBpi2CmDeviceCertEntry 2 }
--
-- CM Crypto Suite Table
--
docsBpi2CmCryptoSuiteTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmCryptoSuiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the Baseline Privacy Plus
cryptographic suite capabilites for each CM MAC interface."
::= { docsBpi2CmObjects 5 }
docsBpi2CmCryptoSuiteEntry OBJECT-TYPE
SYNTAX DocsBpi2CmCryptoSuiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a cryptographic suite pair
which this CM MAC supports."
INDEX { ifIndex, docsBpi2CmCryptoSuiteIndex }
::= { docsBpi2CmCryptoSuiteTable 1 }
DocsBpi2CmCryptoSuiteEntry ::= SEQUENCE {
docsBpi2CmCryptoSuiteIndex Integer32,
docsBpi2CmCryptoSuiteDataEncryptAlg INTEGER,
docsBpi2CmCryptoSuiteDataAuthentAlg INTEGER
}
docsBpi2CmCryptoSuiteIndex OBJECT-TYPE
SYNTAX Integer32 (1..1000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for a cryptographic suite row."
::= { docsBpi2CmCryptoSuiteEntry 1 }
docsBpi2CmCryptoSuiteDataEncryptAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm for this cryptographic suite capability."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmCryptoSuiteEntry 2 }
docsBpi2CmCryptoSuiteDataAuthentAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm for this cryptographic suite capability."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmCryptoSuiteEntry 3 }
-- Cable Modem Termination System Group
docsBpi2CmtsObjects OBJECT IDENTIFIER ::= { docsBpi2MIBObjects 2 }
--
-- SPECIAL NOTE: For the following CMTS tables, when a CM is running
-- in BPI mode, replace SAID (Security Association ID)
-- with SID (Service ID). The CMTS is required to map SAIDs and SIDs
-- to one contiguous space.
--
--
-- The BPI+ base table for CMTSs, indexed by ifIndex
--
docsBpi2CmtsBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the basic Baseline Privacy
attributes of each CMTS MAC interface."
::= { docsBpi2CmtsObjects 1 }
docsBpi2CmtsBaseEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one CMTS MAC interface. An entry in this table exists for
each ifEntry with an ifType of docsCableMaclayer(127)."
INDEX { ifIndex }
::= { docsBpi2CmtsBaseTable 1 }
DocsBpi2CmtsBaseEntry ::= SEQUENCE {
docsBpi2CmtsDefaultAuthLifetime Integer32,
docsBpi2CmtsDefaultTEKLifetime Integer32,
docsBpi2CmtsDefaultSelfSignedManufCertTrust INTEGER,
docsBpi2CmtsCheckCertValidityPeriods TruthValue,
docsBpi2CmtsAuthentInfos Counter32,
docsBpi2CmtsAuthRequests Counter32,
docsBpi2CmtsAuthReplies Counter32,
docsBpi2CmtsAuthRejects Counter32,
docsBpi2CmtsAuthInvalids Counter32,
docsBpi2CmtsSAMapRequests Counter32,
docsBpi2CmtsSAMapReplies Counter32,
docsBpi2CmtsSAMapRejects Counter32
}
docsBpi2CmtsDefaultAuthLifetime OBJECT-TYPE
SYNTAX Integer32 (1..6048000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the default lifetime, in
seconds, the CMTS assigns to a new authorization key."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.2."
::= { docsBpi2CmtsBaseEntry 1 }
docsBpi2CmtsDefaultTEKLifetime OBJECT-TYPE
SYNTAX Integer32 (1..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the default lifetime, in
seconds, the CMTS assigns to a new Traffic Encryption Key
(TEK)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.2."
::= { docsBpi2CmtsBaseEntry 2 }
docsBpi2CmtsDefaultSelfSignedManufCertTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted (1),
untrusted (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines the default trust of all (new)
self-signed manufacturer certificates obtained after setting
the object."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1"
::= { docsBpi2CmtsBaseEntry 3 }
docsBpi2CmtsCheckCertValidityPeriods OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to TRUE causes all certificates
obtained thereafter to have their validity periods (and their
chain's validity periods) checked against the current time of
day. A FALSE setting will cause all certificates obtained
thereafter to not have their validity periods (nor their
chain's validity periods) checked against the current time of
day."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.2"
::= { docsBpi2CmtsBaseEntry 4 }
docsBpi2CmtsAuthentInfos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received an Authentication Information message from
any CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.9."
::= { docsBpi2CmtsBaseEntry 5 }
docsBpi2CmtsAuthRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received an Authorization Request message from any
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.1."
::= { docsBpi2CmtsBaseEntry 6 }
docsBpi2CmtsAuthReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an Authorization Reply message to any
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2."
::= { docsBpi2CmtsBaseEntry 7 }
docsBpi2CmtsAuthRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an Authorization Reject message to any
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.3."
::= { docsBpi2CmtsBaseEntry 8 }
docsBpi2CmtsAuthInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an Authorization Invalid message to any
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.7."
::= { docsBpi2CmtsBaseEntry 9 }
docsBpi2CmtsSAMapRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received an SA Map Request message from any CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.10."
::= { docsBpi2CmtsBaseEntry 10 }
docsBpi2CmtsSAMapReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an SA Map Reply message to any CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.11."
::= { docsBpi2CmtsBaseEntry 11 }
docsBpi2CmtsSAMapRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an SA Map Reject message to any CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.12."
::= { docsBpi2CmtsBaseEntry 12 }
--
-- The CMTS Authorization Table, indexed by ifIndex and CM MAC
-- address
--
docsBpi2CmtsAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of each CM
authorization association. The CMTS maintains one
authorization association with each Baseline Privacy-enabled
CM on each CMTS MAC interface."
::= { docsBpi2CmtsObjects 2 }
docsBpi2CmtsAuthEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one authorization association. The CMTS MUST create one entry
per CM per MAC interface, based on the receipt of an
Authorization Request message, and MUST not delete the entry
before the CM authorization permanently expires."
INDEX { ifIndex, docsBpi2CmtsAuthCmMacAddress }
::= { docsBpi2CmtsAuthTable 1 }
DocsBpi2CmtsAuthEntry ::= SEQUENCE {
docsBpi2CmtsAuthCmMacAddress MacAddress,
docsBpi2CmtsAuthCmBpiVersion INTEGER,
docsBpi2CmtsAuthCmPublicKey OCTET STRING,
docsBpi2CmtsAuthCmKeySequenceNumber Integer32,
docsBpi2CmtsAuthCmExpiresOld DateAndTime,
docsBpi2CmtsAuthCmExpiresNew DateAndTime,
docsBpi2CmtsAuthCmLifetime Integer32,
docsBpi2CmtsAuthCmGraceTime Integer32,
docsBpi2CmtsAuthCmReset INTEGER,
docsBpi2CmtsAuthCmInfos Counter32,
docsBpi2CmtsAuthCmRequests Counter32,
docsBpi2CmtsAuthCmReplies Counter32,
docsBpi2CmtsAuthCmRejects Counter32,
docsBpi2CmtsAuthCmInvalids Counter32,
docsBpi2CmtsAuthRejectErrorCode INTEGER,
docsBpi2CmtsAuthRejectErrorString SnmpAdminString,
docsBpi2CmtsAuthInvalidErrorCode INTEGER,
docsBpi2CmtsAuthInvalidErrorString SnmpAdminString,
docsBpi2CmtsAuthPrimarySAId Integer32,
docsBpi2CmtsAuthBpkmCmCertValid INTEGER,
docsBpi2CmtsAuthBpkmCmCert X509Certificate
}
docsBpi2CmtsAuthCmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is the physical address of
the CM to which the authorization association applies."
::= { docsBpi2CmtsAuthEntry 1 }
docsBpi2CmtsAuthCmBpiVersion OBJECT-TYPE
SYNTAX INTEGER {
bpi (0),
bpiPlus (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the version of Baseline
Privacy for which this CM has registered."
::= { docsBpi2CmtsAuthEntry 2 }
docsBpi2CmtsAuthCmPublicKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0|74|106|140|204|270))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is a DER-encoded
RSAPublicKey ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1) [10], corresponding to the
public key of the CM. The 74, 106, 140, 204, and 270 byte key
encoding lengths correspond to 512 bit, 768 bit, 1024 bit,
1536 bit, and 2048 public moduli respectively. This is a
zero-length string if the CMTS does not retain the public
key."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.4."
::= { docsBpi2CmtsAuthEntry 3 }
docsBpi2CmtsAuthCmKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent
authorization key sequence number for this CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.10."
::= { docsBpi2CmtsAuthEntry 4 }
docsBpi2CmtsAuthCmExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the immediate predecessor of the most
recent authorization key for this FSM. If this FSM has only
one authorization key, then the value is the time of
activation of this FSM.
Note: For CMs running in BPI mode, implementation of this
object is optional and MAY vary."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmtsAuthEntry 5 }
docsBpi2CmtsAuthCmExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the most recent authorization key for this
FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.2 and 4.2.2.9."
::= { docsBpi2CmtsAuthEntry 6 }
docsBpi2CmtsAuthCmLifetime OBJECT-TYPE
SYNTAX Integer32 (1..6048000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the lifetime, in seconds,
the CMTS assigns to an authorization key for this CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2 and Appendix A.2."
::= { docsBpi2CmtsAuthEntry 7 }
-- Note: the following object has been obsoleted
docsBpi2CmtsAuthCmGraceTime OBJECT-TYPE
SYNTAX Integer32 (1..6047999)
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of this object is the grace time for the
authorization key in seconds. The CM is expected to start
trying to get a new authorization key beginning AuthGraceTime
seconds before the authorization key actually expires.
Note: Tracking this value is optional on certain CMTS
implementations."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.3."
::= { docsBpi2CmtsAuthEntry 8 }
docsBpi2CmtsAuthCmReset OBJECT-TYPE
SYNTAX INTEGER {
noResetRequested(1),
invalidateAuth(2),
sendAuthInvalid(3),
invalidateTeks(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to invalidateAuth(2) causes the
CMTS to invalidate the current CM authorization key(s), but
not to transmit an Authorization Invalid message nor to
invalidate unicast TEKs. Setting this object to
sendAuthInvalid(3) causes the CMTS to invalidate the current
CM authorization key(s), and to transmit an Authorization
Invalid message to the CM, but not to invalidate unicast TEKs.
Setting this object to invalidateTeks(4) causes the CMTS to
invalidate the current CM authorization key(s), to transmit an
Authorization Invalid message to the CM, and to invalidate all
unicast TEKs associated with this CM authorization. Reading
this object returns the most-recently-set value of this
object, or returns noResetRequested(1) if the object has not
been set since the last CMTS reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.1.2.3.4, 4.1.2.3.5, and 4.1.3.3.5."
::= { docsBpi2CmtsAuthEntry 9 }
docsBpi2CmtsAuthCmInfos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received an Authentication Information message from
this CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.9."
::= { docsBpi2CmtsAuthEntry 10 }
docsBpi2CmtsAuthCmRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received an Authorization Request message from this
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.1."
::= { docsBpi2CmtsAuthEntry 11 }
docsBpi2CmtsAuthCmReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an Authorization Reply message to this
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.2."
::= { docsBpi2CmtsAuthEntry 12 }
docsBpi2CmtsAuthCmRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an Authorization Reject message to this
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.3."
::= { docsBpi2CmtsAuthEntry 13 }
docsBpi2CmtsAuthCmInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an Authorization Invalid message to this
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.7."
::= { docsBpi2CmtsAuthEntry 14 }
docsBpi2CmtsAuthRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unauthorizedSaid(4),
permanentAuthorizationFailure(8),
timeOfDayNotAcquired(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in most recent Authorization
Reject message transmitted to the CM. This has value
unknown(2) if the last Error-Code value was 0, and none(1) if
no Authorization Reject message has been transmitted to the
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.15."
::= { docsBpi2CmtsAuthEntry 15 }
docsBpi2CmtsAuthRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
most recent Authorization Reject message transmitted to the
CM. This is a zero length string if no Authorization Reject
message has been transmitted to the CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.3 and 4.2.2.6."
::= { docsBpi2CmtsAuthEntry 16 }
docsBpi2CmtsAuthInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedCm(3),
unsolicited(5),
invalidKeySequence(6),
keyRequestAuthenticationFailure(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in most recent Authorization
Invalid message transmitted to the CM. This has value
unknown(2) if the last Error-Code value was 0, and none(1) if
no Authorization Invalid message has been transmitted to the
CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.15."
::= { docsBpi2CmtsAuthEntry 17 }
docsBpi2CmtsAuthInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
most recent Authorization Invalid message transmitted to the
CM. This is a zero length string if no Authorization Invalid
message has been transmitted to the CM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.7 and 4.2.2.6."
::= { docsBpi2CmtsAuthEntry 18 }
docsBpi2CmtsAuthPrimarySAId OBJECT-TYPE
SYNTAX Integer32 (0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Primary Security
Association identifier."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmtsAuthEntry 19 }
docsBpi2CmtsAuthBpkmCmCertValid OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
validCmChained (1),
validCmTrusted (2),
invalidCmUntrusted (3),
invalidCAUntrusted (4),
invalidCmOther (5),
invalidCAOther (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the reason why a CM's certificate is deemed
valid or invalid.
Return unknown if the CM is running BPI mode.
ValidCmChained means the certificate is valid because
it chains to a valid certificate.
ValidCmTrusted means the certificate is valid because
it has been provisioned (in the docsBpi2CmtsProvisionedCmCert
table) to be trusted.
InvalidCmUntrusted means the certificate is invalid
because it has been provisioned (in the
docsBpi2CmtsProvisionedCmCert table) to be untrusted.
InvalidCAUntrusted means the certificate is invalid
because it chains to an untrusted certificate.
InvalidCmOther and InvalidCAOther refer to errors in
parsing, validity periods, etc, which are attributable to the
cm certificate or its chain respectively; additional
information may be found in docsBpi2AuthRejectErrorString for
these types of errors."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.2."
::= { docsBpi2CmtsAuthEntry 20 }
docsBpi2CmtsAuthBpkmCmCert OBJECT-TYPE
SYNTAX X509Certificate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The X509 CM Certificate sent as part of a BPKM
Authorization Request.
Note: The NULL string must be returned if the entire
certificate is not retained in the CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsAuthEntry 21 }
--
-- The CMTS TEK Table, indexed by ifIndex and SAID
--
docsBpi2CmtsTEKTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the attributes of each
Traffic Encryption Key (TEK) association. The CMTS maintains
one TEK association per SAID on each CMTS MAC interface."
::= { docsBpi2CmtsObjects 3 }
docsBpi2CmtsTEKEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsTEKEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing attributes of
one TEK association on a particular CMTS MAC interface. The
CMTS MUST create one entry per SAID per MAC interface,
based on the receipt of a Key Request message, and MUST not
delete the entry before the CM authorization for the SAID
permanently expires."
INDEX { ifIndex, docsBpi2CmtsTEKSAId }
::= { docsBpi2CmtsTEKTable 1 }
DocsBpi2CmtsTEKEntry ::= SEQUENCE {
docsBpi2CmtsTEKSAId Integer32,
docsBpi2CmtsTEKSAType INTEGER,
docsBpi2CmtsTEKDataEncryptAlg INTEGER,
docsBpi2CmtsTEKDataAuthentAlg INTEGER,
docsBpi2CmtsTEKLifetime Integer32,
docsBpi2CmtsTEKGraceTime Integer32,
docsBpi2CmtsTEKKeySequenceNumber Integer32,
docsBpi2CmtsTEKExpiresOld DateAndTime,
docsBpi2CmtsTEKExpiresNew DateAndTime,
docsBpi2CmtsTEKReset TruthValue,
docsBpi2CmtsKeyRequests Counter32,
docsBpi2CmtsKeyReplies Counter32,
docsBpi2CmtsKeyRejects Counter32,
docsBpi2CmtsTEKInvalids Counter32,
docsBpi2CmtsKeyRejectErrorCode INTEGER,
docsBpi2CmtsKeyRejectErrorString SnmpAdminString,
docsBpi2CmtsTEKInvalidErrorCode INTEGER,
docsBpi2CmtsTEKInvalidErrorString SnmpAdminString
}
docsBpi2CmtsTEKSAId OBJECT-TYPE
SYNTAX Integer32 (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object is the DOCSIS Security
Association ID (SAID)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.12."
::= { docsBpi2CmtsTEKEntry 1 }
docsBpi2CmtsTEKSAType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
static(2),
dynamic(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the type of security
association. Dynamic does not apply to CMs running in
BPI mode."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmtsTEKEntry 2 }
docsBpi2CmtsTEKDataEncryptAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm being utilized."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmtsTEKEntry 3 }
docsBpi2CmtsTEKDataAuthentAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm being utilized."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
::= { docsBpi2CmtsTEKEntry 4 }
docsBpi2CmtsTEKLifetime OBJECT-TYPE
SYNTAX Integer32 (1..604800)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the lifetime, in
seconds, the CMTS assigns to keys for this TEK association."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.5 and Appendix A.2."
::= { docsBpi2CmtsTEKEntry 5 }
-- Note: the following object has been obsoleted
docsBpi2CmtsTEKGraceTime OBJECT-TYPE
SYNTAX Integer32 (1..302399)
UNITS "seconds"
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of this object is the grace time for
the TEK in seconds. The CM is expected to start trying to
acquire a new TEK beginning TEK GraceTime seconds before
the TEK actually expires.
Note: The value of this object is vendor specific for
multicast TEKs."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Appendix A.1.1.1.6."
::= { docsBpi2CmtsTEKEntry 6 }
docsBpi2CmtsTEKKeySequenceNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the most recent TEK
key sequence number for this SAID."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.2.10 and 4.2.2.13."
::= { docsBpi2CmtsTEKEntry 7 }
docsBpi2CmtsTEKExpiresOld OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the immediate predecessor of the most
recent TEK for this FSM. If this FSM has only one TEK, then
the value is the time of activation of this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmtsTEKEntry 8 }
docsBpi2CmtsTEKExpiresNew OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the actual clock time
for expiration of the most recent TEK for this FSM."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.5 and 4.2.2.9."
::= { docsBpi2CmtsTEKEntry 9 }
docsBpi2CmtsTEKReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to TRUE causes the CMTS to
invalidate the current active TEK(s) (plural due to key
transition periods), and to generate a new TEK for the
associated SAID; the CMTS MAY also generate an unsolicited
TEK Invalid message, to optimize the TEK synchronization
between the CMTS and the CM. Reading this object always
returns FALSE."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.1.3.3.5."
::= { docsBpi2CmtsTEKEntry 10 }
docsBpi2CmtsKeyRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received a Key Request message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.4."
::= { docsBpi2CmtsTEKEntry 11 }
docsBpi2CmtsKeyReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted a Key Reply message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.5."
::= { docsBpi2CmtsTEKEntry 12 }
docsBpi2CmtsKeyRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted a Key Reject message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.6."
::= { docsBpi2CmtsTEKEntry 13 }
docsBpi2CmtsTEKInvalids OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted a TEK Invalid message."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.8."
::= { docsBpi2CmtsTEKEntry 14 }
docsBpi2CmtsKeyRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
unauthorizedSaid(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent Key Reject
message sent in response to a Key Request for this SAID.
This has value unknown(2) if the last Error-Code value
was 0, and none(1) if no Key Reject message has been received
since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.6 and 4.2.2.15."
::= { docsBpi2CmtsTEKEntry 15 }
docsBpi2CmtsKeyRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
the most recent Key Reject message sent in response to a Key
Request for this SAID. This is a zero length string if no
Key Reject message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.6 and 4.2.2.6."
::= { docsBpi2CmtsTEKEntry 16 }
docsBpi2CmtsTEKInvalidErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
invalidKeySequence(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent TEK Invalid
message sent in association with this SAID. This has value
unknown(2) if the last Error-Code value was 0, and none(1) if
no TEK Invalid message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.8 and 4.2.2.15."
::= { docsBpi2CmtsTEKEntry 17 }
docsBpi2CmtsTEKInvalidErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
the most recent TEK Invalid message sent in association with
this SAID. This is a zero length string if no TEK Invalid
message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.8 and 4.2.2.6."
::= { docsBpi2CmtsTEKEntry 18 }
--
-- The CMTS Multicast Objects Group
--
docsBpi2CmtsMulticastObjects OBJECT IDENTIFIER
::= { docsBpi2CmtsObjects 4 }
--
-- The CMTS IP Multicast Mapping Table, indexed by
-- docsBpi2CmtsIpMulticastIndex, and by ifindex
--
docsBpi2CmtsIpMulticastMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps multicast IP addresses to SAIDs."
::= { docsBpi2CmtsMulticastObjects 1 }
docsBpi2CmtsIpMulticastMapEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsIpMulticastMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the mapping of
a set of multicast IP address and mask to one SAID, as well as
associated message counters and error information."
INDEX { ifIndex, docsBpi2CmtsIpMulticastIndex }
::= { docsBpi2CmtsIpMulticastMapTable 1 }
DocsBpi2CmtsIpMulticastMapEntry ::= SEQUENCE {
docsBpi2CmtsIpMulticastIndex Integer32,
docsBpi2CmtsIpMulticastAddressType InetAddressType,
docsBpi2CmtsIpMulticastAddress InetAddress,
docsBpi2CmtsIpMulticastMaskType InetAddressType,
docsBpi2CmtsIpMulticastMask InetAddress,
docsBpi2CmtsIpMulticastSAId Integer32,
docsBpi2CmtsIpMulticastSAType INTEGER,
docsBpi2CmtsIpMulticastDataEncryptAlg INTEGER,
docsBpi2CmtsIpMulticastDataAuthentAlg INTEGER,
docsBpi2CmtsIpMulticastSAMapRequests Counter32,
docsBpi2CmtsIpMulticastSAMapReplies Counter32,
docsBpi2CmtsIpMulticastSAMapRejects Counter32,
docsBpi2CmtsIpMulticastSAMapRejectErrorCode INTEGER,
docsBpi2CmtsIpMulticastSAMapRejectErrorString SnmpAdminString,
docsBpi2CmtsIpMulticastMapControl RowStatus
}
docsBpi2CmtsIpMulticastIndex OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this row."
::= { docsBpi2CmtsIpMulticastMapEntry 1 }
docsBpi2CmtsIpMulticastAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of internet address for
docsBpi2CmtsIpMulticastAddress."
DEFVAL { ipv4 }
::= { docsBpi2CmtsIpMulticastMapEntry 2 }
docsBpi2CmtsIpMulticastAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the IP multicast address
to be mapped, in conjunction with
docsBpi2CmtsIpMulticastMask."
::= { docsBpi2CmtsIpMulticastMapEntry 3 }
docsBpi2CmtsIpMulticastMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of internet address for
docsBpi2CmtsIpMulticastMask."
DEFVAL { ipv4 }
::= { docsBpi2CmtsIpMulticastMapEntry 4 }
docsBpi2CmtsIpMulticastMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the IP multicast address mask
for this row.
An IP multicast address matches this row if it is
equivalent to the logical AND of
docsBpi2CmtsIpMulticastAddr with
docsBpi2CmtsIpMulticastMask."
::= { docsBpi2CmtsIpMulticastMapEntry 5 }
docsBpi2CmtsIpMulticastSAId OBJECT-TYPE
SYNTAX Integer32 (0..16383)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the multicast SAID to be
used in this IP multicast address mapping entry."
::= { docsBpi2CmtsIpMulticastMapEntry 6 }
docsBpi2CmtsIpMulticastSAType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
static(2),
dynamic(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is the type of security
association. Dynamic does not apply to CMs running in
BPI mode."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 2.1.3."
::= { docsBpi2CmtsIpMulticastMapEntry 7 }
docsBpi2CmtsIpMulticastDataEncryptAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
des56CbcMode(1),
des40CbcMode(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is the data encryption
algorithm being utilized."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
DEFVAL { des56CbcMode }
::= { docsBpi2CmtsIpMulticastMapEntry 8 }
docsBpi2CmtsIpMulticastDataAuthentAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is the data authentication
algorithm being utilized."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.2.20."
DEFVAL { none }
::= { docsBpi2CmtsIpMulticastMapEntry 9 }
docsBpi2CmtsIpMulticastSAMapRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has received an SA Map Request message for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.10."
::= { docsBpi2CmtsIpMulticastMapEntry 10 }
docsBpi2CmtsIpMulticastSAMapReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an SA Map Reply message for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.11."
::= { docsBpi2CmtsIpMulticastMapEntry 11 }
docsBpi2CmtsIpMulticastSAMapRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the count of times the
CMTS has transmitted an SA Map Reject message for this IP."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 4.2.1.12."
::= { docsBpi2CmtsIpMulticastMapEntry 12 }
docsBpi2CmtsIpMulticastSAMapRejectErrorCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unknown(2),
noAuthForRequestedDSFlow(9),
dsFlowNotMappedToSA(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the enumerated
description of the Error-Code in the most recent SA Map
Reject message sent in response to a SA Map Request for this
IP. It has value unknown(2) if the last Error-Code value
was 0, and none(1) if no SA MAP Reject message has been
received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.15."
::= { docsBpi2CmtsIpMulticastMapEntry 13 }
docsBpi2CmtsIpMulticastSAMapRejectErrorString OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Display-String in
the most recent SA Map Reject message sent in response to an
SA Map Request for this IP. It is a zero length string if
no SA Map Reject message has been received since reboot."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Sections 4.2.1.12 and 4.2.2.6."
::= { docsBpi2CmtsIpMulticastMapEntry 14 }
docsBpi2CmtsIpMulticastMapControl OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls and reflects the IP multicast
address mapping entry. There is no restriction on the ability
to change values in this row while the row is active.
Inactive rows need not be timed out."
::= { docsBpi2CmtsIpMulticastMapEntry 15 }
--
-- The CMTS Multicast SAID Authorization Table, indexed by ifIndex by
-- multicast SAID by CM MAC address
--
docsBpi2CmtsMulticastAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsMulticastAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the multicast SAID
authorization for each CM on each CMTS MAC interface."
::= { docsBpi2CmtsMulticastObjects 2 }
docsBpi2CmtsMulticastAuthEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsMulticastAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains objects describing the key
authorization of one cable modem for one multicast SAID
for one CMTS MAC interface."
INDEX { ifIndex, docsBpi2CmtsMulticastAuthSAId,
docsBpi2CmtsMulticastAuthCmMacAddress }
::= { docsBpi2CmtsMulticastAuthTable 1 }
DocsBpi2CmtsMulticastAuthEntry ::= SEQUENCE
{
docsBpi2CmtsMulticastAuthSAId Integer32,
docsBpi2CmtsMulticastAuthCmMacAddress MacAddress,
docsBpi2CmtsMulticastAuthControl RowStatus
}
docsBpi2CmtsMulticastAuthSAId OBJECT-TYPE
SYNTAX Integer32 (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the multicast SAID for
authorization."
::= { docsBpi2CmtsMulticastAuthEntry 1 }
docsBpi2CmtsMulticastAuthCmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the MAC address of the CM
to which the multicast SAID authorization applies."
::= { docsBpi2CmtsMulticastAuthEntry 2 }
docsBpi2CmtsMulticastAuthControl OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls and reflects the CM
authorization for each multicast SAID. There is no
restriction on the ability to change values in this row
while the row is active. Inactive rows need not be
timed out."
::= { docsBpi2CmtsMulticastAuthEntry 3 }
--
-- CMTS Cert Objects
--
docsBpi2CmtsCertObjects OBJECT IDENTIFIER
::= { docsBpi2CmtsObjects 5 }
--
-- CMTS Provisioned CM Cert Table
--
docsBpi2CmtsProvisionedCmCertTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsProvisionedCmCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of CM certificate trust entries provisioned
to the CMTS. The trust object for a certificate in this table
has an overriding effect on the validity object of a
certificate in the authorization table, as long as the
entire contents of the two certificates are identical."
::= { docsBpi2CmtsCertObjects 1 }
docsBpi2CmtsProvisionedCmCertEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsProvisionedCmCertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the CMTS' provisioned CM certificate
table."
INDEX { docsBpi2CmtsProvisionedCmCertMacAddress }
::= { docsBpi2CmtsProvisionedCmCertTable 1 }
DocsBpi2CmtsProvisionedCmCertEntry ::= SEQUENCE
{
docsBpi2CmtsProvisionedCmCertMacAddress MacAddress,
docsBpi2CmtsProvisionedCmCertTrust INTEGER,
docsBpi2CmtsProvisionedCmCertSource INTEGER,
docsBpi2CmtsProvisionedCmCertStatus RowStatus,
docsBpi2CmtsProvisionedCmCert X509Certificate
}
docsBpi2CmtsProvisionedCmCertMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this row."
::= { docsBpi2CmtsProvisionedCmCertEntry 1 }
docsBpi2CmtsProvisionedCmCertTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted (1),
untrusted (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trust state for the provisioned CM certificate entry.
Note: Setting this object need only override the validity of
CM certificates sent in future authorization requests;
instantaneous effect need not occur."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1."
DEFVAL { untrusted }
::= { docsBpi2CmtsProvisionedCmCertEntry 2 }
docsBpi2CmtsProvisionedCmCertSource OBJECT-TYPE
SYNTAX INTEGER {
snmp (1),
configurationFile (2),
externalDatabase (3),
other (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the certificate reached the
CMTS. Other means it originated from a source not identified
above."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1."
::= { docsBpi2CmtsProvisionedCmCertEntry 3 }
docsBpi2CmtsProvisionedCmCertStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Standard RowStatus object except:
a) if a row has ever been activated,
a set to docsBpi2CmtsProvisionedCmCert need not succeed,
b) inactive rows need not be timed out."
::= { docsBpi2CmtsProvisionedCmCertEntry 4 }
docsBpi2CmtsProvisionedCmCert OBJECT-TYPE
SYNTAX X509Certificate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An X509 DER-encoded certificate authority
certificate.
Note: The NULL string must be returned, on reads, if the
entire certificate is not retained in the CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsProvisionedCmCertEntry 5 }
--
-- CMTS CA Cert Table
--
docsBpi2CmtsCACertTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsBpi2CmtsCACertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of known certificate authority certificates
acquired by this device."
::= { docsBpi2CmtsCertObjects 2 }
docsBpi2CmtsCACertEntry OBJECT-TYPE
SYNTAX DocsBpi2CmtsCACertEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Certificate Authority certificate
table."
INDEX { docsBpi2CmtsCACertIndex }
::= {docsBpi2CmtsCACertTable 1 }
DocsBpi2CmtsCACertEntry ::= SEQUENCE {
docsBpi2CmtsCACertIndex Integer32,
docsBpi2CmtsCACertSubject SnmpAdminString,
docsBpi2CmtsCACertIssuer SnmpAdminString,
docsBpi2CmtsCACertSerialNumber OCTET STRING,
docsBpi2CmtsCACertTrust INTEGER,
docsBpi2CmtsCACertSource INTEGER,
docsBpi2CmtsCACertStatus RowStatus,
docsBpi2CmtsCACert X509Certificate,
docsBpi2CmtsCACertThumbprint OCTET STRING
}
docsBpi2CmtsCACertIndex OBJECT-TYPE
SYNTAX Integer32 (1..10000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this row."
::= { docsBpi2CmtsCACertEntry 1 }
docsBpi2CmtsCACertSubject OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subject name exactly as it is encoded in the
X509 certificate.
The organizationName portion of the certificate's subject
name must be present. All other fields are optional. Any
optional field present must be prepended with CR (carriage
return) LF (line feed) ASCII characters.
Ordering of fields present must conform to:
organizationName
CR LF
countryName
CR LF
stateOrProvinceName
CR LF
localityName
CR LF
organizationalUnitName
CR LF
organizationalUnitName=<Manufacturing Location>
CR LF
commonName
"
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2.4"
::= { docsBpi2CmtsCACertEntry 2 }
docsBpi2CmtsCACertIssuer OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The issuer name exactly as it is encoded in the
X509 certificate.
The commonName portion of the certificate's issuer
name must be present. All other fields are optional. Any
optional field present must be prepended with CR (carriage
return) LF (line feed) ASCII characters.
Ordering of fields present must conform to:
commonName
CR LF
countryName
CR LF
stateOrProvinceName
CR LF
localityName
CR LF
organizationName
CR LF
organizationalUnitName
CR LF
organizationalUnitName=<Manufacturing Location>
"
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2.4"
::= { docsBpi2CmtsCACertEntry 3 }
docsBpi2CmtsCACertSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This CA certificate's serial number represented as
an octet string."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2.2"
::= { docsBpi2CmtsCACertEntry 4 }
docsBpi2CmtsCACertTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted (1),
untrusted (2),
chained (3),
root (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the trust status of this
certificate. Root certificates must be given root trust;
manufacturer certificates must not be given root trust.
Trust on root certificates must not change.
Note: Setting this object need only affect the validity of
CM certificates sent in future authorization requests;
instantaneous effect need not occur."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1"
DEFVAL { chained }
::= { docsBpi2CmtsCACertEntry 5 }
docsBpi2CmtsCACertSource OBJECT-TYPE
SYNTAX INTEGER {
snmp (1),
configurationFile (2),
externalDatabase (3),
other (4),
authentInfo (5),
compiledIntoCode (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates how the certificate reached
the CMTS. Other means it originated from a source not
identified above."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.1"
::= { docsBpi2CmtsCACertEntry 6 }
docsBpi2CmtsCACertStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Standard RowStatus objects except:
a) if a row has ever been activated,
a set to docsBpi2CmtsCACert need not succeed,
b) inactive rows need not be timed out,
c) if a row has ever been activated, a destroy setting need
not succeed."
::= { docsBpi2CmtsCACertEntry 7 }
docsBpi2CmtsCACert OBJECT-TYPE
SYNTAX X509Certificate
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An X509 DER-encoded certificate authority
certificate.
To help identify certificates, either this object or
docsBpi2CmtsCACertThumbprint must be returned by a CMTS for
self-signed CA certificates.
Note: The NULL string must be returned, on reads, if the
entire certificate is not retained in the CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.2."
::= { docsBpi2CmtsCACertEntry 8 }
docsBpi2CmtsCACertThumbprint OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SHA-1 hash of a CA certificate.
To help identify certificates, either this object or
docsBpi2CmtsCACert must be returned by a CMTS for
self-signed CA certificates.
Note: The NULL string must be returned if this object is
not supported by the CMTS."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section 9.4.3"
::= { docsBpi2CmtsCACertEntry 9 }
--
-- Authenticated Software Download Objects
--
--
-- Note: the authenticated software download objects are a
-- CM requirement only.
--
docsBpi2CodeDownloadControl OBJECT IDENTIFIER
::= { docsBpi2MIBObjects 4 }
docsBpi2CodeDownloadStatusCode OBJECT-TYPE
SYNTAX INTEGER {
configFileCvcVerified (1),
configFileCvcRejected (2),
snmpCvcVerified (3),
snmpCvcRejected (4),
codeFileVerified (5),
codeFileRejected (6),
other (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value indicates the result of the latest config
file CVC verification, SNMP CVC verification, or code file
verification."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.3.2 & D.3.5.1."
::= { docsBpi2CodeDownloadControl 1 }
docsBpi2CodeDownloadStatusString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the additional
information to the status code. The value will include
the error code and error description which will be defined
separately."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section TBD (see D.3.7)"
::= { docsBpi2CodeDownloadControl 2 }
docsBpi2CodeMfgOrgName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the device manufacturer's
organizationName."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 3 }
docsBpi2CodeMfgCodeAccessStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the device manufacturer's
current codeAccessStart value referenced to Greenwich Mean
Time (GMT)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 4 }
docsBpi2CodeMfgCvcAccessStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the device manufacturer's
current cvcAccessStart value referenced to Greenwich Mean
Time (GMT)."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 5 }
docsBpi2CodeCoSignerOrgName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Co-Signer's
organizationName. The value is a zero length string if
the co-signer is not specified."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 6 }
docsBpi2CodeCoSignerCodeAccessStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Co-Signer's current
codeAccessStart value referenced to Greenwich Mean
Time (GMT). If docsBpi2CodeCoSignerOrgName is a zero
length string, the value of this object is meaningless."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 7 }
docsBpi2CodeCoSignerCvcAccessStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object is the Co-Signer's current
cvcAccessStart value referenced to Greenwich Mean
Time (GMT). If docsBpi2CodeCoSignerOrgName is a zero
length string, the value of this object is meaningless."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.2.2."
::= { docsBpi2CodeDownloadControl 8 }
docsBpi2CodeCvcUpdate OBJECT-TYPE
SYNTAX X509Certificate
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting a CVC to this object triggers the device
to verify the CVC and update the cvcAccessStart value.
If the device is not enabled to upgrade codefiles, or
the CVC verification fails, the CVC will be rejected.
Reading this object always returns the null string."
REFERENCE
"DOCSIS Baseline Privacy Plus Interface Specification,
Section D.3.3.2.2."
::= { docsBpi2CodeDownloadControl 9 }
--
-- The BPI+ MIB Conformance Statements (with a placeholder for
-- notifications)
--
docsBpi2Notification OBJECT IDENTIFIER
::= { docsBpi2MIB 2 }
docsBpi2Conformance OBJECT IDENTIFIER
::= { docsBpi2MIB 3 }
docsBpi2Compliances OBJECT IDENTIFIER
::= { docsBpi2Conformance 1 }
docsBpi2Groups OBJECT IDENTIFIER
::= { docsBpi2Conformance 2 }
docsBpi2BasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"This is the compliance statement for devices which
implement the DOCSIS Baseline Privacy Interface."
MODULE -- docsBpi2MIB
-- conditionally mandatory group
GROUP docsBpi2CmGroup
DESCRIPTION
"This group is implemented only in CMs, not in CMTSs."
-- conditionally mandatory group
GROUP docsBpi2CmtsGroup
DESCRIPTION
"This group is implemented only in CMTSs, not in CMs."
-- conditionally mandatory group
GROUP docsBpi2CodeDownloadGroup
DESCRIPTION
"This group is required in CMs and is optional in CMTSs."
-- relaxation on mandatory range
OBJECT docsBpi2CmtsDefaultAuthLifetime
SYNTAX Integer32 (86400..6048000)
DESCRIPTION
"The refined range corresponds to the minimum and maximum
values in operational networks, according to Appendix A.2 in
[7]."
-- relaxation on mandatory range
OBJECT docsBpi2CmtsDefaultTEKLifetime
SYNTAX Integer32 (1800..604800)
DESCRIPTION
"The refined range corresponds to the minimum and maximum
values in operational networks, according to Appendix A.2 in
[7]."
-- relaxation on mandatory range
OBJECT docsBpi2CmtsAuthCmLifetime
SYNTAX Integer32 (86400..6048000)
DESCRIPTION
"The refined range corresponds to the minimum and maximum
values in operational networks, according to Appendix A.2 in
[7]."
-- relaxation on mandatory range
OBJECT docsBpi2CmtsTEKLifetime
SYNTAX Integer32 (1800..604800)
DESCRIPTION
"The refined range corresponds to the minimum and maximum
values in operational networks, according to Appendix A.2 in
[7]."
-- relaxation on IP addressing
OBJECT docsBpi2CmIpMulticastAddressType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
-- relaxation on IP addressing
OBJECT docsBpi2CmIpMulticastAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
-- relaxation on IP addressing
OBJECT docsBpi2CmtsIpMulticastAddressType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
-- relaxation on IP addressing
OBJECT docsBpi2CmtsIpMulticastAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
-- relaxation on IP addressing
OBJECT docsBpi2CmtsIpMulticastMaskType
-- SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
-- relaxation on IP addressing
OBJECT docsBpi2CmtsIpMulticastMask
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
::= { docsBpi2Compliances 1 }
docsBpi2CmGroup OBJECT-GROUP
OBJECTS {
docsBpi2CmPrivacyEnable,
docsBpi2CmPublicKey,
docsBpi2CmAuthState,
docsBpi2CmAuthKeySequenceNumber,
docsBpi2CmAuthExpiresOld,
docsBpi2CmAuthExpiresNew,
docsBpi2CmAuthReset,
docsBpi2CmAuthGraceTime,
docsBpi2CmTEKGraceTime,
docsBpi2CmAuthWaitTimeout,
docsBpi2CmReauthWaitTimeout,
docsBpi2CmOpWaitTimeout,
docsBpi2CmRekeyWaitTimeout,
docsBpi2CmAuthRejectWaitTimeout,
docsBpi2CmSAMapWaitTimeout,
docsBpi2CmSAMapMaxRetries,
docsBpi2CmAuthentInfos,
docsBpi2CmAuthRequests,
docsBpi2CmAuthReplies,
docsBpi2CmAuthRejects,
docsBpi2CmAuthInvalids,
docsBpi2CmAuthRejectErrorCode,
docsBpi2CmAuthRejectErrorString,
docsBpi2CmAuthInvalidErrorCode,
docsBpi2CmAuthInvalidErrorString,
docsBpi2CmTEKSAType,
docsBpi2CmTEKDataEncryptAlg,
docsBpi2CmTEKDataAuthentAlg,
docsBpi2CmTEKState,
docsBpi2CmTEKKeySequenceNumber,
docsBpi2CmTEKExpiresOld,
docsBpi2CmTEKExpiresNew,
docsBpi2CmTEKKeyRequests,
docsBpi2CmTEKKeyReplies,
docsBpi2CmTEKKeyRejects,
docsBpi2CmTEKInvalids,
docsBpi2CmTEKAuthPends,
docsBpi2CmTEKKeyRejectErrorCode,
docsBpi2CmTEKKeyRejectErrorString,
docsBpi2CmTEKInvalidErrorCode,
docsBpi2CmTEKInvalidErrorString,
docsBpi2CmIpMulticastAddressType,
docsBpi2CmIpMulticastAddress,
docsBpi2CmIpMulticastSAId,
docsBpi2CmIpMulticastSAMapState,
docsBpi2CmIpMulticastSAMapRequests,
docsBpi2CmIpMulticastSAMapReplies,
docsBpi2CmIpMulticastSAMapRejects,
docsBpi2CmIpMulticastSAMapRejectErrorCode,
docsBpi2CmIpMulticastSAMapRejectErrorString,
docsBpi2CmDeviceCmCert,
docsBpi2CmDeviceManufCert,
docsBpi2CmCryptoSuiteDataEncryptAlg,
docsBpi2CmCryptoSuiteDataAuthentAlg
}
STATUS current
DESCRIPTION
"This collection of objects provides CM BPI+ status and
control."
::= { docsBpi2Groups 1 }
docsBpi2CmtsGroup OBJECT-GROUP
OBJECTS {
docsBpi2CmtsDefaultAuthLifetime,
docsBpi2CmtsDefaultTEKLifetime,
docsBpi2CmtsDefaultSelfSignedManufCertTrust,
docsBpi2CmtsCheckCertValidityPeriods,
docsBpi2CmtsAuthentInfos,
docsBpi2CmtsAuthRequests,
docsBpi2CmtsAuthReplies,
docsBpi2CmtsAuthRejects,
docsBpi2CmtsAuthInvalids,
docsBpi2CmtsSAMapRequests,
docsBpi2CmtsSAMapReplies,
docsBpi2CmtsSAMapRejects,
docsBpi2CmtsAuthCmBpiVersion,
docsBpi2CmtsAuthCmPublicKey,
docsBpi2CmtsAuthCmKeySequenceNumber,
docsBpi2CmtsAuthCmExpiresOld,
docsBpi2CmtsAuthCmExpiresNew,
docsBpi2CmtsAuthCmLifetime,
docsBpi2CmtsAuthCmReset,
docsBpi2CmtsAuthCmInfos,
docsBpi2CmtsAuthCmRequests,
docsBpi2CmtsAuthCmReplies,
docsBpi2CmtsAuthCmRejects,
docsBpi2CmtsAuthCmInvalids,
docsBpi2CmtsAuthRejectErrorCode,
docsBpi2CmtsAuthRejectErrorString,
docsBpi2CmtsAuthInvalidErrorCode,
docsBpi2CmtsAuthInvalidErrorString,
docsBpi2CmtsAuthPrimarySAId,
docsBpi2CmtsAuthBpkmCmCertValid,
docsBpi2CmtsAuthBpkmCmCert,
docsBpi2CmtsTEKSAType,
docsBpi2CmtsTEKDataEncryptAlg,
docsBpi2CmtsTEKDataAuthentAlg,
docsBpi2CmtsTEKLifetime,
docsBpi2CmtsTEKKeySequenceNumber,
docsBpi2CmtsTEKExpiresOld,
docsBpi2CmtsTEKExpiresNew,
docsBpi2CmtsTEKReset,
docsBpi2CmtsKeyRequests,
docsBpi2CmtsKeyReplies,
docsBpi2CmtsKeyRejects,
docsBpi2CmtsTEKInvalids,
docsBpi2CmtsKeyRejectErrorCode,
docsBpi2CmtsKeyRejectErrorString,
docsBpi2CmtsTEKInvalidErrorCode,
docsBpi2CmtsTEKInvalidErrorString,
docsBpi2CmtsIpMulticastAddressType,
docsBpi2CmtsIpMulticastAddress,
docsBpi2CmtsIpMulticastMaskType,
docsBpi2CmtsIpMulticastMask,
docsBpi2CmtsIpMulticastSAId,
docsBpi2CmtsIpMulticastSAType,
docsBpi2CmtsIpMulticastDataEncryptAlg,
docsBpi2CmtsIpMulticastDataAuthentAlg,
docsBpi2CmtsIpMulticastSAMapRequests,
docsBpi2CmtsIpMulticastSAMapReplies,
docsBpi2CmtsIpMulticastSAMapRejects,
docsBpi2CmtsIpMulticastSAMapRejectErrorCode,
docsBpi2CmtsIpMulticastSAMapRejectErrorString,
docsBpi2CmtsIpMulticastMapControl,
docsBpi2CmtsMulticastAuthControl,
docsBpi2CmtsProvisionedCmCertTrust,
docsBpi2CmtsProvisionedCmCertSource,
docsBpi2CmtsProvisionedCmCertStatus,
docsBpi2CmtsProvisionedCmCert,
docsBpi2CmtsCACertSubject,
docsBpi2CmtsCACertIssuer,
docsBpi2CmtsCACertSerialNumber,
docsBpi2CmtsCACertTrust,
docsBpi2CmtsCACertSource,
docsBpi2CmtsCACertStatus,
docsBpi2CmtsCACert,
docsBpi2CmtsCACertThumbprint
}
STATUS current
DESCRIPTION
"This collection of objects provides CMTS BPI+ status and
control."
::= { docsBpi2Groups 2 }
docsBpi2CodeDownloadGroup OBJECT-GROUP
OBJECTS {
docsBpi2CodeDownloadStatusCode,
docsBpi2CodeDownloadStatusString,
docsBpi2CodeMfgOrgName,
docsBpi2CodeMfgCodeAccessStart,
docsBpi2CodeMfgCvcAccessStart,
docsBpi2CodeCoSignerOrgName,
docsBpi2CodeCoSignerCodeAccessStart,
docsBpi2CodeCoSignerCvcAccessStart,
docsBpi2CodeCvcUpdate
}
STATUS current
DESCRIPTION
"This collection of objects provide authenticated software
download support."
::= { docsBpi2Groups 3 }
docsBpi2ObsoleteObjectsGroup OBJECT-GROUP
OBJECTS {
docsBpi2CmtsAuthCmGraceTime,
docsBpi2CmtsTEKGraceTime
}
STATUS obsolete
DESCRIPTION
"This is a collection of obsolete BPI+ objects."
::= { docsBpi2Groups 4 }
END
Reference in New Issue Copy Permalink