david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/arris/DOCS-QOS-MIB

3295 lines
105 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
DOCS-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
IpAddress,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
MacAddress,
RowStatus,
TruthValue,
DisplayString,
TimeStamp
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
ifIndex,
InterfaceIndex
FROM IF-MIB
docsIfMib
FROM DOCS-IF-MIB;
docsQosMIB MODULE-IDENTITY
LAST-UPDATED "0010180000Z" -- Oct 18, 2000
ORGANIZATION "IETF IPCDN Working Group"
CONTACT-INFO
"
Co-Author: Michael Patrick
Postal: Motorola ISG
20 Cabot Blvd, MS M4-30
Mansfield, MA 02048-1193
U.S.A.
Phone: +1 508 261 5707
E-mail: michael.patrick@motorola.com"
DESCRIPTION
"This is the management information for
Quality Of Service (QOS) for DOCSIS 1.1."
REVISION "0010180000Z" -- October 18, 2000
DESCRIPTION
"Published as draft-ietf-ipcdn-qos-mib-04.txt.
Changes from qos-mib-03 include:
- Moved six objects from docsQosServiceFlowTable back
to docsQosParamSetTable.
- Added five counters to docsQosDynamicServiceStatsTable for
DCC counts.
- Removed notApplicable(256) from docsQosParamSetSchedulingType
- Clarified reported values of docsQosParamSetTable objects.
The CMTS reports any CMTS-specific default value it is
using, and unknown or not applicable params are reported as zero.
- Add docsQosPktClassBitMap
- Add docsQosParamSetBitMap
- Restore docsQosParamSetServiceClassName
- Add 5 objects to docsQosServiceFlowLogTable
- Add docsQosServiceClassDirection
"
::= { docsIfMib 7 } -- BPIPlus mib is docsIfMIb 6
docsQosMIBObjects OBJECT IDENTIFIER ::= { docsQosMIB 1 }
-- Textual Conventions
IfDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Indicates a direction on an RF MAC interface.
The value downstream(1) is from Cable Modem
Termination System to Cable Modem.
The value upstream(2) is from Cable Modem to
Cable Modem Termination System."
SYNTAX INTEGER {
downstream(1),
upstream(2)
}
BitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION "The rate of traffic in unit of bits per second.
Used to specify traffic rate for QOS."
SYNTAX Unsigned32
SchedulingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "The scheduling service provided by a CMTS for an
upstream service flow. If the parameter is omitted
from an upstream QOS Parameter Set, this object takes
the value of bestEffort (2). This parameter must be
reported as undefined (1) for downstream QOS Parameter
Sets."
SYNTAX INTEGER {
undefined (1),
bestEffort (2),
nonRealTimePollingService(3),
realTimePollingService(4),
unsolictedGrantServiceWithAD(5),
unsolictedGrantService(6)
}
-----------------------------------------------------------------------
--
-- Packet Classifier Table
--
docsQosPktClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.
"
::= { docsQosMIBObjects 1 }
docsQosPktClassEntry OBJECT-TYPE
SYNTAX DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in this table provides a single packet
classifier rule. The index ifIndex is an ifType
of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosServiceFlowId,
docsQosPktClassId
}
::= { docsQosPktClassTable 1 }
DocsQosPktClassEntry ::= SEQUENCE {
docsQosPktClassId Integer32,
docsQosPktClassDirection IfDirection,
docsQosPktClassPriority Integer32,
docsQosPktClassIpTosLow OCTET STRING,
docsQosPktClassIpTosHigh OCTET STRING,
docsQosPktClassIpTosMask OCTET STRING,
docsQosPktClassIpProtocol Integer32,
docsQosPktClassIpSourceAddr IpAddress,
docsQosPktClassIpSourceMask IpAddress,
docsQosPktClassIpDestAddr IpAddress,
docsQosPktClassIpDestMask IpAddress,
docsQosPktClassSourcePortStart Integer32,
docsQosPktClassSourcePortEnd Integer32,
docsQosPktClassDestPortStart Integer32,
docsQosPktClassDestPortEnd Integer32,
docsQosPktClassDestMacAddr MacAddress,
docsQosPktClassDestMacMask MacAddress,
docsQosPktClassSourceMacAddr MacAddress,
docsQosPktClassEnetProtocolType INTEGER,
docsQosPktClassEnetProtocol Integer32,
docsQosPktClassUserPriLow Integer32,
docsQosPktClassUserPriHigh Integer32,
docsQosPktClassVlanId Integer32,
docsQosPktClassState INTEGER,
docsQosPktClassPkts Counter32,
docsQosPktClassBitMap BITS
}
docsQosPktClassId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index assigned to packet classifier entry by
the CMTS which is unique per service flow."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.3.2"
::= { docsQosPktClassEntry 1 }
docsQosPktClassDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the direction to which the classifier
is applied."
::= { docsQosPktClassEntry 2 }
docsQosPktClassPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value specifies the order of evaluation
of the classifiers.
The higher the value the higher the priority.
The value of 0 is used as default in
provisioned service flows classifiers.
The default value of 64 is used for dynamic
service flow classifiers.
If the referenced parameter is not present
in a classifier, this object reports the default value
as defined above."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.3.5"
::= { docsQosPktClassEntry 3 }
docsQosPktClassIpTosLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The low value of a range of TOS byte values.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.1"
::= { docsQosPktClassEntry 4 }
docsQosPktClassIpTosHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The 8-bit high value of a range of TOS byte
values.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.1"
::= { docsQosPktClassEntry 5 }
docsQosPktClassIpTosMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The mask value is bitwise ANDed with TOS byte
in an IP packet and this value is used check
range checking of TosLow and TosHigh.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.1"
::= { docsQosPktClassEntry 6 }
docsQosPktClassIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..258)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the value of the IP
Protocol field required for IP packets to match
this rule.
The value 256 matches traffic with any IP Protocol
value. The value 257 by convention matches both TCP
and UDP.
If the referenced parameter is not present
in a classifier, this object reports the value of 258."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.2"
::= { docsQosPktClassEntry 7 }
docsQosPktClassIpSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the value of the IP
Source Address required for packets to match
this rule. An IP packet matches the rule when
the packet ip source address bitwise ANDed
with the docsQosPktClassIpSourceMask value
equals the docsQosPktClassIpSourceAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
0.0.0.0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.3"
::= { docsQosPktClassEntry 8 }
docsQosPktClassIpSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies which bits of a packet's
IP Source Address that are compared to match
this rule.
An IP packet matches the rule when the packet
source address bitwise ANDed with the
docsQosPktClassIpSourceMask value equals the
docsQosIpPktClassSourceAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
0.0.0.0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.4"
::= { docsQosPktClassEntry 9 }
docsQosPktClassIpDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the value of the IP
Destination Address required for packets to
match this rule. An IP packet matches the rule
when the packet IP destination address
bitwise ANDed with the
docsQosPktClassIpDestMask value equals the
docsQosPktClassIpDestAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
0.0.0.0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.5"
::= { docsQosPktClassEntry 10 }
docsQosPktClassIpDestMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies which bits of a packet's
IP Destination Address that are compared to
match this rule.
An IP packet matches the rule when the packet
destination address bitwise ANDed with the
docsQosPktClassIpDestMask value equals the
docsQosPktClassIpDestAddr value.
If the referenced parameter is not present
in a classifier, this object reports the value of
0.0.0.0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.6"
::= { docsQosPktClassEntry 11}
docsQosPktClassSourcePortStart OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the low end inclusive
range of TCP/UDP source port numbers to which
a packet is compared. This object is irrelevant
for non-TCP/UDP IP packets.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.7"
::= { docsQosPktClassEntry 12 }
docsQosPktClassSourcePortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the high end inclusive
range of TCP/UDP source port numbers to which
a packet is compared. This object is irrelevant
for non-TCP/UDP IP packets.
If the referenced parameter is not present
in a classifier, this object reports the value of
65535."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.9"
::= { docsQosPktClassEntry 13 }
docsQosPktClassDestPortStart OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the low end inclusive
range of TCP/UDP destination port numbers to
which a packet is compared.
If the referenced parameter is not present
in a classifier, this object reports the value of 0."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.9"
::= { docsQosPktClassEntry 14 }
docsQosPktClassDestPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object specifies the high end inclusive
range of TCP/UDP destination port numbers to which
a packet is compared.
If the referenced parameter is not present
in a classifier, this object reports the value of
65535."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.5.10"
::= { docsQosPktClassEntry 15 }
docsQosPktClassDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
docsQosPktClassDestMacMask equals the value of
docsQosPktClassDestMacAddr.
If the referenced parameter is not present
in a classifier, this object reports the value of
'000000000000'H.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.6.1"
::= { docsQosPktClassEntry 16 }
docsQosPktClassDestMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
docsQosPktClassDestMacMask equals the value of
docsQosPktClassDestMacAddr.
If the referenced parameter is not present
in a classifier, this object reports the value of
'000000000000'H.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.6.1"
::= { docsQosPktClassEntry 17 }
docsQosPktClassSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An Ethernet packet matches this entry when its
source MAC address equals the value of
this object.
If the referenced parameter is not present
in a classifier, this object reports the value of
'FFFFFFFFFFFF'H.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.6.2"
::= { docsQosPktClassEntry 18 }
docsQosPktClassEnetProtocolType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethertype(1),
dsap(2),
mac(3),
all(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the format of the layer 3
protocol id in the Ethernet packet. A value of
none(0) means that the rule does not use the
layer 3 protocol type as a matching criteria.
A value of ethertype(1) means that the rule
applies only to frames which contains an
EtherType value. Ethertype values are contained
in packets using the Dec-Intel-Xerox (DIX)
encapsulation or the RFC1042 Sub-Network Access
Protocol (SNAP) encapsulation formats.
A value of dsap(2) means that the rule applies
only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other
than 0xAA (which is reserved for SNAP).
A value of mac(3) means that the rule applies
only to MAC management messages for MAC management
messages.
A value of all(4) means that the rule matches
all Ethernet packets.
If the Ethernet frame contains an 802.1P/Q Tag
header (i.e. EtherType 0x8100), this object
applies to the embedded EtherType field within
the 802.1P/Q header.
If the referenced parameter is not present
in a classifier, this object reports the value of 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.6.3"
::= { docsQosPktClassEntry 19 }
docsQosPktClassEnetProtocol OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If docsQosEthPktClassProtocolType is none(0),
this object is ignored when considering whether
a packet matches the current rule.
If dosQosPktClassEnetProtocolType is ethertype(1),
this object gives the 16-bit value of the
EtherType that the packet must match in order to
match the rule.
If docsQosPktClassEnetProtocolType is dsap(2), the
lower 8 bits of this object's value must match the
DSAP byte of the packet in order to match the
rule.
If docsQosPktClassEnetProtocolType is mac(3), the
lower 8 bits of this object value represent a
lower bound (inclusive) of MAC management message
type codes matched, and the upper 8 bits of this
object value represent the upper bound (inclusive)
of matched MAC message type codes. Certain
message type codes are excluded from matching, as
specified in the reference.
If the Ethernet frame contains an 802.1P/Q Tag header
(i.e. EtherType 0x8100), this object applies to the
embedded EtherType field within the 802.1P/Q header.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.6.3"
::= { docsQosPktClassEntry 20 }
-- docsQosPktClassUserPriApplies { docsQosPktClassEntry 21 }
-- was removed in revision -03.
docsQosPktClassUserPriLow OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Q tag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3 bit Priority field and
a 12 bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsQosPktClassPriLow and docsQosPktClassPriHigh in
order to match this rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.7.1"
::= { docsQosPktClassEntry 22 }
docsQosPktClassUserPriHigh OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3 bit Priority field and
a 12 bit VLAN number.
Tagged Ethernet packets must have a 3-bit
Priority field within the range of
docsQosPktClassPriLow and
docsQosPktClassPriHigh in order to match this
rule.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 7.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.7.1"
::= { docsQosPktClassEntry 23 }
docsQosPktClassVlanId OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object applies only to Ethernet frames
using the 802.1P/Q tag header.
If this object's value is nonzero, tagged
packets must have a VLAN Identifier that matches
the value in order to match the rule.
Only the least significant 12 bits of this object's
value are valid.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.7.2"
::= { docsQosPktClassEntry 24 }
docsQosPktClassState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates whether or not the classifier
is enabled to classify packets to a Service Flow.
If the referenced parameter is not present in the
classifier, the value of this object is reported
as active(1).
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.3.6"
::= { docsQosPktClassEntry 25 }
docsQosPktClassPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object counts the number of packets that have
been classified using this entry."
::= { docsQosPktClassEntry 26 }
docsQosPktClassBitMap OBJECT-TYPE
SYNTAX BITS { -- Reference SP-RFIv1.1-I05-000714
rulePriority(0), -- Appendix C.2.1.3.4
activationState(1), -- Appendix C.2.1.3.6
ipTos(2), -- Appendix C.2.1.5.1
ipProtocol(3), -- Appendix C.2.1.5.2
ipSourceAddr(4), -- Appendix C.2.1.5.3
ipSourceMask(5), -- Appendix C.2.1.5.4
ipDestAddr(6), -- Appendix C.2.1.5.5
ipDestMask(7), -- Appendix C.2.1.5.6
sourcePortStart(8), -- Appendix C.2.1.5.7
sourcePortEnd(9), -- Appendix C.2.1.5.8
destPortStart(10), -- Appendix C.2.1.5.9
destPortEnd(11), -- Appendix C.2.1.5.10
destMac(12), -- Appendix C.2.1.6.1
sourceMac(13), -- Appendix C.2.1.6.2
ethertype(14), -- Appendix C.2.1.6.3
userPri(15), -- Appendix C.2.1.7.1
vlanId(16) -- Appendix C.2.1.7.2
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates which parameter encodings
were actually present in the DOCSIS packet classifier
encoding signalled in the DOCSIS message that
created the classifier.
A bit of of this object is set to 1 if the parameter
indicated by the comment was present in the classifier
encoding, and 0 otherwise.
Note that BITS are encoded most significant bit
first, so that if e.g. bits 6 and 7 are set, this object
is encoded as the octet string '030000'H.
"
::= { docsQosPktClassEntry 27 }
--
-- QOS Parameter Set Table
--
docsQosParamSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause.
"
::= { docsQosMIBObjects 2 }
docsQosParamSetEntry OBJECT-TYPE
SYNTAX DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique set of QOS parameters."
INDEX {
ifIndex, docsQosServiceFlowId, docsQosParamSetType
}
::= { docsQosParamSetTable 2 }
-- Type of docsQosParamSet Entry { docsQosParamSetTable 1 } was
-- changed with revision -03
DocsQosParamSetEntry ::= SEQUENCE {
docsQosParamSetServiceClassName DisplayString,
docsQosParamSetPriority Integer32,
docsQosParamSetMaxTrafficRate BitRate,
docsQosParamSetMaxTrafficBurst Unsigned32,
docsQosParamSetMinReservedRate BitRate,
docsQosParamSetMinReservedPkt Integer32,
docsQosParamSetActiveTimeout Integer32,
docsQosParamSetAdmittedTimeout Integer32,
docsQosParamSetMaxConcatBurst Integer32,
docsQosParamSetSchedulingType SchedulingType,
docsQosParamSetNomPollInterval Unsigned32,
docsQosParamSetTolPollJitter Unsigned32,
docsQosParamSetUnsolicitGrantSize Integer32,
docsQosParamSetNomGrantInterval Unsigned32,
docsQosParamSetTolGrantJitter Unsigned32,
docsQosParamSetGrantsPerInterval Integer32,
docsQosParamSetTosAndMask OCTET STRING,
docsQosParamSetTosOrMask OCTET STRING,
docsQosParamSetMaxLatency Unsigned32,
docsQosParamSetType INTEGER,
docsQosParamSetRequestPolicyOct OCTET STRING,
docsQosParamSetBitMap BITS
}
-- Removed docsQosParamSetRowType { docsQosParamSetEntry 1 }
-- with revision -03
-- Removed docsQosParamSetIndex { docsQosParamSetEntry 2 }
-- with revision -03
-- Removed docsQosParamSetRowStatus { docsQosParamSetEntry 3}
-- with revision -03
docsQosParamSetServiceClassName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Refers to the Service Class Name that the
parameter set values were derived.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is a zero length string.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.3.4"
::= { docsQosParamSetEntry 4 }
docsQosParamSetPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The relative priority of a service flow.
Higher numbers indicate higher priority.
This priority should only be used to differentiate
service flow with identical parameter sets.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter is
not applicable, the reported value is 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.2"
::= { docsQosParamSetEntry 5 }
docsQosParamSetMaxTrafficRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum sustained traffic rate allowed for this
service flow in bits/sec. Must count all MAC frame
data PDU from the bytes following the MAC header HCS to
the end of the CRC. The number of bytes
forwarded is limited during any time interval.
The value 0 means no maximum traffic rate is
enforced. This object applies to both upstream and
downstream service flows.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter is
not applicable, it is reported as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.3"
::= { docsQosParamSetEntry 6 }
docsQosParamSetMaxTrafficBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the token bucket size in bytes
for this parameter set. The value is calculated
from the byte following the MAC header HCS to
the end of the CRC. This object is applied in
conjunction with docsQosParamSetMaxTrafficRate to
calculate maximum sustained traffic rate.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object for scheduling types
bestEffort (2), nonRealTimePollingService(3),
and realTimePollingService(4) is 1522.
If this parameter is not applicable, it is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.4"
::= { docsQosParamSetEntry 7 }
docsQosParamSetMinReservedRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the guaranteed minimum rate in
bits/sec for this parameter set. The value is
calculated from the byte following the MAC
header HCS to the end of the CRC. The default
value of 0 has the meaning that no bandwidth
is reserved.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter
is not applicable, it is reported as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.5"
::= { docsQosParamSetEntry 8 }
docsQosParamSetMinReservedPkt OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies an assumed minimum packet size in
bytes for which the docsQosParamSetMinReservedRate
will be provided. The value is calculated from
the byte following the MAC header HCS to the
end of the CRC.
If the referenced parameter is omitted from a
DOCSIS QOS parameter set, the default value is
CMTS implementation dependent. In this case, the
CMTS reports the default value it is using and the
CM reports a value of 0. If the referenced
parameter is not applicable to the direction or
scheduling type of the service flow, both CMTS and
CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.6"
::= { docsQosParamSetEntry 9 }
docsQosParamSetActiveTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum duration in seconds that
resources remain unused on an active service
flow before CMTS signals that both active and
admitted parameters set are null.
The default value of 0 signifies an
infinite amount of time.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.7"
::= { docsQosParamSetEntry 10 }
docsQosParamSetAdmittedTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum duration in seconds that
resources remain in admitted state before
resources must be released.
The value of 0 signifies an infinite amount
of time.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the
default value of this object is 200.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.5.8"
DEFVAL { 200 }
::= { docsQosParamSetEntry 11 }
docsQosParamSetMaxConcatBurst OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum concatenated burst in
bytes which an upstream service flow is allowed.
The value is calculated from the FC byte of the
Concatenation MAC Header to the last CRC byte in
of the last concatenated MAC frame, inclusive.
The value of 0 specifies no maximum burst.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set, the default
value of this object is 0. If the parameter is
not applicable, this object's value is reported
as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.1"
::= { docsQosParamSetEntry 12 }
docsQosParamSetSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the upstream scheduling service used for
upstream service flow.
If the referenced parameter is not present in the
corresponding DOCSIS QOS Parameter Set of an
upstream service flow, the default value of this
object is bestEffort(2). For QOS parameter sets of
downstream service flows, this object's value is
reported as undefined(1).
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.2"
::= { docsQosParamSetEntry 13 }
-- Changed type of docsQosParamSetRequestPolicy { docsQosParamSetEntry 14 }
-- to docsQosParamSetRequestPolicyOct { docsQosParamSetEntry 25 }
docsQosParamSetNomPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the nominal interval in microseconds
between successive unicast request
opportunities on an upstream service flow.
This object applies only to upstream service flows
with schedulingType of value
nonRealTimePollingService(3),
realTimePollingService(4), and
unsolictedGrantServiceWithAD(5). The parameter is
mandatory for realTimePollingService(4). If the
parameter is omitted with
nonRealTimePollingService(3), the CMTS uses an
implementation dependent value. If the parameter
is omitted with unsolictedGrantServiceWithAD(5),
the CMTS uses as a default value the value of the
Nominal Grant Interval parameter. In all cases,
the CMTS reports the value it is using when the
parameter is applicable. The CM reports the
signaled parameter value if it was signaled,
and 0 otherwise.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.4"
::= { docsQosParamSetEntry 15 }
docsQosParamSetTolPollJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum amount of time in
microseconds that the unicast request interval
may be delayed from the nominal periodic
schedule on an upstream service flow.
This parameter is applicable only to upstream
service flows with a Schedulingtype of
realTimePollingService(4) or
unsolictedGrantServiceWithAD(5).
If the referenced parameter is applicable but not
present in the corresponding DOCSIS QOS Parameter
Set, the CMTS uses an implementation dependent
value and reports the value it is using.
The CM reports a value of 0 in this case.
If the parameter is not applicable to the
direction or upstream scheduling type of the
service flow, both CMTS and CM report this
object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.5"
::= { docsQosParamSetEntry 16 }
docsQosParamSetUnsolicitGrantSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the unsolicited grant size in bytes.
The grant size includes the entired MAC frame
data PDU from the Frame Control byte to end of
the MAC frame.
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report
the signaled value of the parameter in this
case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.6"
::= { docsQosParamSetEntry 17 }
docsQosParamSetNomGrantInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the nominal interval in microseconds
between successive data grant opportunities
on an upstream service flow.
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report the
signaled value of the parameter in this case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.7"
::= { docsQosParamSetEntry 18 }
docsQosParamSetTolGrantJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum amount of time in
microseconds that the transmission opportunities
may be delayed from the nominal periodic schedule.
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report the
signaled value of the parameter in this case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.8"
::= { docsQosParamSetEntry 19 }
docsQosParamSetGrantsPerInterval OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the number of data grants per Nominal
Grant Interval
(docsQosParamSetNomGrantInterval).
The referenced parameter is applicable only
for upstream flows with a SchedulingType of
of unsolicitedGrantServicewithAD(5) or
unsolicitedGrantService(6), and is mandatory
when applicable. Both CMTS and CM report the
signaled value of the parameter in this case.
If the referenced parameter is not applicable to
the direction or scheduling type of the
corresponding DOCSIS QOS Parameter Set, both
CMTS and CM report this object's value as 0.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.9"
::= { docsQosParamSetEntry 20 }
docsQosParamSetTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the AND mask for IP TOS byte for overwriting
IP packets TOS value. The IP packets TOS byte is
bitwise ANDed with docsQosParamSetTosAndMask and
result is bitwise ORed with docsQosParamSetTosORMask
and result is written to IP packet TOS byte.
A value of 'FF'H for docsQosParamSetTosAndMask and
a value of '00'H for docsQosParamSetTosOrMask means
that IP Packet TOS byte is not overwritten.
This combination is reported if the referenced
parameter is not present in a QOS Parameter Set."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.10"
::= { docsQosParamSetEntry 21 }
docsQosParamSetTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the OR mask for IP TOS byte.
See the description of docsQosParamSetTosAndMask
for further details."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.10"
::= { docsQosParamSetEntry 22 }
docsQosParamSetMaxLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the maximum latency between the
reception of a packet by the CMTS on its NSI
and the forwarding of the packet to the RF
interface. A value of 0 signifies no maximum
latency enforced. This object only applies to
downstream service flows.
If the referenced parameter is not present in the
corresponding downstream DOCSIS QOS Parameter Set,
the default value is 0. This parameter is
not applicable to upstream DOCSIS QOS Parameter Sets,
and its value is reported as 0 in this case.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.7.1"
::= { docsQosParamSetEntry 23 }
docsQosParamSetType OBJECT-TYPE
SYNTAX INTEGER {
active (1),
admitted (2),
provisioned (3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defines the type of the QOS parameter set defined
by this row. active(1) indicates the Active QOS
parameter set, describing the service currently
being provided by the Docsis MAC domain to the
service flow. admitted(2) indicates the Admitted
QOS Parameter Set, describing services reserved by
by the Docsis MAC domain for use by the service flow.
provisioned (3) describes the QOS Parameter Set
defined in the DOCSIS CM Configuration file for
the service flow."
REFERENCE "SP-RFIv1.1-I05-000714, 8.1.5"
::= { docsQosParamSetEntry 24 }
docsQosParamSetRequestPolicyOct OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
-- A 32-bit mask represented most significant byte
-- first. The 32 bit integer represented in this manner
-- equals the binary value of the referenced integer
-- parameter of the DOCSIS RFI specification.
-- The BITS syntax is not used in order to avoid
-- the confusion caused by different bit numbering
-- conventions.
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies which transmit interval opportunities
the CM omits for upstream transmission requests and
packet transmissions. This object takes its
default value for downstream service flows.
Unless otherwise indicated, a bit value of 1 means
that a CM must *not* use that opportunity for
upstream transmission.
Calling bit 0 the least significant bit of the
least significant (4th) octet, and increasing
bit number with significance, the bit definitions
are as defined below:
broadcastReqOpp(0):
all CMs broadcast request opportunities
priorityReqMulticastReq(1):
priority request multicast request opportunities
reqDataForReq(3):
request/data opportunities for requests
reqDataForData(4):
request/data opportunities for data
concatenateData(5):
concatenate data
fragmentData(6):
fragment data
suppresspayloadheaders(7):
suppress payload headers
dropPktsExceedUGSize(8):
A value of 1 mean that service flow must drop
packet that do not fit in the Unsolicited
Grant size
If the referenced parameter is not present in
a QOS Parameter Set, the value of this object is
reported as '00000000'H.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.6.3"
::= { docsQosParamSetEntry 25 }
docsQosParamSetBitMap OBJECT-TYPE
-- Each bit corresponds to a parameter
-- from SP-RFI-v1.1-I05-000714, Appendix C
SYNTAX BITS { -- in the indicated section number.
trafficPriority(0), -- C.2.2.5.2
maxTrafficRate(1), -- C.2.2.5.3
maxTrafficBurst(2), -- C.2.2.5.4
minReservedRate(3), -- C.2.2.5.5
minReservedPkt(4), -- C.2.2.5.6
activeTimeout(5), -- C.2.2.5.7
admittedTimeout(6), -- C.2.2.5.8
maxConcatBurst(7), -- C.2.2.6.1
schedulingType(8), -- C.2.2.6.2
requestPolicy(9), -- C.2.2.6.3
nomPollInterval(10), -- C.2.2.6.4
tolPollJitter(11), -- C.2.2.6.5
unsolicitGrantSize(12), -- C.2.2.6.6
nomGrantInterval(13), -- C.2.2.6.7
tolGrantJitter(14), -- C.2.2.6.8
grantsPerInterval(15), -- C.2.2.6.9
tosOverwrite(16), -- C.2.2.6.10
maxLatency(17) -- C.2.2.7.1
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the set of QOS Parameter
Set parameters actually signaled in the
DOCSIS registration or dynamic service request
message that created the QOS Parameter Set.
A bit is set to 1 when the parameter described
by the indicated reference section is present
in the original request.
Note that when Service Class names are expanded,
the registration or dynamic response message may
contain parameters as expanded by the CMTS based
on a stored service class. These expanded
parameters are *not* indicated by a 1 bit in this
object.
Note that even though some QOS Parameter Set
parameters may not be signalled in a message
(so that the paramater's bit in this object is 0)
the DOCSIS specification calls for default
values to be used. These default values are
reported as the corresponding object's value in
the row.
Note that BITS objects are encoded most
significant bit first. For example, if bits
1 and 16 are set, the value of this object
is the octet string '400080'H.
"
::= { docsQosParamSetEntry 26 }
--
-- Service Flow Table
--
docsQosServiceFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of Docsis-QOS
Service Flows in a managed device. "
::= { docsQosMIBObjects 3 }
docsQosServiceFlowEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a service flow.
An entry in the table exists for each
Service Flow ID. The ifIndex is an
ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosServiceFlowId
}
::= { docsQosServiceFlowTable 1 }
DocsQosServiceFlowEntry ::= SEQUENCE {
docsQosServiceFlowId Unsigned32,
docsQosServiceFlowSID Unsigned32,
docsQosServiceFlowDirection IfDirection,
docsQosServiceFlowPrimary TruthValue
}
docsQosServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index assigned to a service flow by CMTS."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.3.2"
::= { docsQosServiceFlowEntry 1 }
-- Remove docsQosServiceFlowProvisionedParamSetIndex
-- {docsQosServiceFlowEntry 2} with revision -03
-- Remove docsQosServiceFlowAdmittedParamSetIndex
-- {docsQosServiceFlowEntry 3} with revision -03
-- Remove docsQosServiceFlowActiveParamSetIndex
-- {docsQosServiceFlowEntry 4} with revision -03
docsQosServiceFlowSID OBJECT-TYPE
SYNTAX Unsigned32 (0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service Identifier (SID) assigned to an
admitted or active service flow. This object
reports a value of 0 if a Service Id is not
associated with the service flow. Only active
or admitted upstream service flows will have a
Service Id (SID)."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.3.3"
::= { docsQosServiceFlowEntry 6 }
docsQosServiceFlowDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The direction of the service flow."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.1/2"
::= { docsQosServiceFlowEntry 7 }
docsQosServiceFlowPrimary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Object reflects whether service flow is the primary
or a secondary service flow.
A primary service flow is the default service flow
for otherwise unclassified traffic and all MAC
messages."
REFERENCE "SP-RFIv1.1-I05-000714, Section 8.1 "
::= { docsQosServiceFlowEntry 8 }
-- Moved docsQosServiceFlow'ActiveTimeout, 'AdmittedTimeout,
-- 'SchedulingType, 'RequestPolicy, 'TosAndMask, and 'TosOrMask
-- back to docsQosParamSetTable with QOS-MIB-04.
--
-- Service Flow Stats Table
--
docsQosServiceFlowStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes statistics associated with the
Service Flows in a managed device. "
::= { docsQosMIBObjects 4 }
docsQosServiceFlowStatsEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a set of service flow statistics.
An entry in the table exists for each
Service Flow ID. The ifIndex is an
ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosServiceFlowId
}
::= { docsQosServiceFlowStatsTable 1 }
DocsQosServiceFlowStatsEntry ::= SEQUENCE {
docsQosServiceFlowPkts Counter32,
docsQosServiceFlowOctets Counter32,
docsQosServiceFlowTimeCreated TimeStamp,
docsQosServiceFlowTimeActive Counter32,
docsQosServiceFlowPHSUnknowns Counter32,
docsQosServiceFlowPolicedDropPkts Counter32,
docsQosServiceFlowPolicedDelayPkts Counter32
}
docsQosServiceFlowPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packet counted on this service flow."
::= { docsQosServiceFlowStatsEntry 1 }
docsQosServiceFlowOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets counted on this service flow
after payload header suppression."
::= { docsQosServiceFlowStatsEntry 2 }
docsQosServiceFlowTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the service flow
was created."
::= { docsQosServiceFlowStatsEntry 3 }
docsQosServiceFlowTimeActive OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total time that service flow has been active."
::= { docsQosServiceFlowStatsEntry 4 }
docsQosServiceFlowPHSUnknowns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packet with unknown payload header
suppression index."
::= { docsQosServiceFlowStatsEntry 5 }
docsQosServiceFlowPolicedDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets dropped due to policing of
the service flow, especially to limit the maximum
rate of the flow."
::= { docsQosServiceFlowStatsEntry 6 }
docsQosServiceFlowPolicedDelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packet delayed due to policing of
the service flow, especially to limit the maximum
rate of the flow."
::= { docsQosServiceFlowStatsEntry 7 }
--
-- Upstream Service Flow Stats Table (CMTS ONLY)
--
docsQosUpstreamStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosUpstreamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes statistics associated with
upstream service flows. All counted frames must
be received without an FCS error."
::= { docsQosMIBObjects 5 }
docsQosUpstreamStatsEntry OBJECT-TYPE
SYNTAX DocsQosUpstreamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a set of upstream service flow statistics.
An entry in the table exists for each
upstream Service Flow in a managed device.
The ifIndex is an ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosSID
}
::= { docsQosUpstreamStatsTable 1 }
DocsQosUpstreamStatsEntry ::= SEQUENCE {
docsQosSID Integer32,
docsQosUpstreamFragments Counter32,
docsQosUpstreamFragDiscards Counter32,
docsQosUpstreamConcatBursts Counter32
}
docsQosSID OBJECT-TYPE
SYNTAX Integer32 (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifies a service id for an admitted or active
upstream service flow."
::= { docsQosUpstreamStatsEntry 1 }
-- Renamed in revision -03 from docsQosUpstreamFragPkts
docsQosUpstreamFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of fragmentation headers received on an
upstream service flow, regardless of whether
the fragment was correctly reassembled into a
valid packet. "
::= { docsQosUpstreamStatsEntry 2 }
docsQosUpstreamFragDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of upstream fragments discarded and not
assembled into a valid upstream packet."
::= { docsQosUpstreamStatsEntry 3 }
docsQosUpstreamConcatBursts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of concatenation headers received on an
upstream service flow."
::= { docsQosUpstreamStatsEntry 4 }
--
-- Dynamic Service Stats Table
--
docsQosDynamicServiceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosDynamicServiceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes statistics associated with the
Dynamic Service Flows in a managed device. "
::= { docsQosMIBObjects 6 }
docsQosDynamicServiceStatsEntry OBJECT-TYPE
SYNTAX DocsQosDynamicServiceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Describes a set of dynamic service flow statistics.
Two entries exist for each Docsis mac layer
interface for the upstream and downstream direction.
On the CMTS, the downstream direction row indicates
messages transmitted or transactions originated
by the CMTS. The upstream direction row indicates
messages received or transaction originated by the
CM. On the CM, the downstream direction row
indicates messages received or transactions
originated by the CMTS. The upstream direction
row indicates messages transmitted by the CM or
transactions originated by the CM.
The ifIndex is an ifType of docsCableMaclayer(127)."
INDEX {
ifIndex,
docsQosIfDirection
}
::= { docsQosDynamicServiceStatsTable 1 }
DocsQosDynamicServiceStatsEntry ::= SEQUENCE {
docsQosIfDirection IfDirection,
docsQosDSAReqs Counter32,
docsQosDSARsps Counter32,
docsQosDSAAcks Counter32,
docsQosDSCReqs Counter32,
docsQosDSCRsps Counter32,
docsQosDSCAcks Counter32,
docsQosDSDReqs Counter32,
docsQosDSDRsps Counter32,
docsQosDynamicAdds Counter32,
docsQosDynamicAddFails Counter32,
docsQosDynamicChanges Counter32,
docsQosDynamicChangeFails Counter32,
docsQosDynamicDeletes Counter32,
docsQosDynamicDeleteFails Counter32,
docsQosDCCReqs Counter32,
docsQosDCCRsps Counter32,
docsQosDCCAcks Counter32,
docsQosDCCs Counter32,
docsQosDCCFails Counter32
}
docsQosIfDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The direction of interface."
::= { docsQosDynamicServiceStatsEntry 1 }
docsQosDSAReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Addition Requests"
::= { docsQosDynamicServiceStatsEntry 2 }
docsQosDSARsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Addition Responses"
::= { docsQosDynamicServiceStatsEntry 3 }
docsQosDSAAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Addition Acknowledgements."
::= { docsQosDynamicServiceStatsEntry 4 }
docsQosDSCReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Change Requests"
::= { docsQosDynamicServiceStatsEntry 5 }
docsQosDSCRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Change Responses"
::= { docsQosDynamicServiceStatsEntry 6 }
docsQosDSCAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Change Acknowlegements."
::= { docsQosDynamicServiceStatsEntry 7 }
docsQosDSDReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Delete Requests"
::= { docsQosDynamicServiceStatsEntry 8 }
docsQosDSDRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Service Delete Responses"
::= { docsQosDynamicServiceStatsEntry 9 }
docsQosDynamicAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Service Addition
transactions."
::= { docsQosDynamicServiceStatsEntry 10 }
docsQosDynamicAddFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Service Addition
transactions."
::= { docsQosDynamicServiceStatsEntry 11 }
docsQosDynamicChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Service Change
transactions."
::= { docsQosDynamicServiceStatsEntry 12 }
docsQosDynamicChangeFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Service Change
transactions."
::= { docsQosDynamicServiceStatsEntry 13 }
docsQosDynamicDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Service Delete
transactions."
::= { docsQosDynamicServiceStatsEntry 14 }
docsQosDynamicDeleteFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Service Delete
transactions."
::= { docsQosDynamicServiceStatsEntry 15 }
docsQosDCCReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Request messages
traversing an interface. This count is nonzero only on
downstream direction rows."
::= { docsQosDynamicServiceStatsEntry 16 }
docsQosDCCRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Response messages
traversing an interface. This count is nonzero only on upstream
direction rows."
::= { docsQosDynamicServiceStatsEntry 17 }
docsQosDCCAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of Dynamic Channel Change Acknowledgement
messages traversing an interface. This count is nonzero only
on downstream direction rows."
::= { docsQosDynamicServiceStatsEntry 18 }
docsQosDCCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of successful Dynamic Channel Change
transactions. This count is nonzero only on downstream direction
rows."
::= { docsQosDynamicServiceStatsEntry 19 }
docsQosDCCFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of failed Dynamic Channel Change
transactions. This count is nonzero only on downstream direction
rows."
::= { docsQosDynamicServiceStatsEntry 20 }
--
-- Service Flow Log Table (CMTS ONLY)
--
docsQosServiceFlowLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains a log of the disconnected
Service Flows in a managed device."
::= { docsQosMIBObjects 7 }
docsQosServiceFlowLogEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The information regarding a single disconnected
service flow."
INDEX {
docsQosServiceFlowLogIndex
}
::= { docsQosServiceFlowLogTable 1 }
DocsQosServiceFlowLogEntry ::= SEQUENCE {
docsQosServiceFlowLogIndex Unsigned32,
docsQosServiceFlowLogIfIndex InterfaceIndex,
docsQosServiceFlowLogSFID Unsigned32,
docsQosServiceFlowLogCmMac MacAddress,
docsQosServiceFlowLogPkts Counter32,
docsQosServiceFlowLogOctets Counter32,
docsQosServiceFlowLogTimeDeleted TimeStamp,
docsQosServiceFlowLogTimeCreated TimeStamp,
docsQosServiceFlowLogTimeActive Counter32,
docsQosServiceFlowLogDirection IfDirection,
docsQosServiceFlowLogPrimary TruthValue,
docsQosServiceFlowLogServiceClassName DisplayString,
docsQosServiceFlowLogPolicedDropPkts Counter32,
docsQosServiceFlowLogPolicedDelayPkts Counter32,
docsQosServiceFlowLogControl INTEGER
}
docsQosServiceFlowLogIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Unique index for a logged service flow."
::= { docsQosServiceFlowLogEntry 1 }
docsQosServiceFlowLogIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of ifType docsCableMacLayter(127)
on the CMTS where the service flow was present."
::= { docsQosServiceFlowLogEntry 2 }
docsQosServiceFlowLogSFID OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The index assigned to the service flow by the CMTS."
::= { docsQosServiceFlowLogEntry 3 }
docsQosServiceFlowLogCmMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MAC address for the cable modem associated with
the service flow."
::= { docsQosServiceFlowLogEntry 4 }
docsQosServiceFlowLogPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets counted on this service flow
after payload header suppression."
::= { docsQosServiceFlowLogEntry 5 }
docsQosServiceFlowLogOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of octets counted on this service flow
after payload header suppression."
::= { docsQosServiceFlowLogEntry 6 }
docsQosServiceFlowLogTimeDeleted OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the service flow
was deleted."
::= { docsQosServiceFlowLogEntry 7 }
docsQosServiceFlowLogTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the service flow
was created."
::= { docsQosServiceFlowLogEntry 8 }
docsQosServiceFlowLogTimeActive OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total time that service flow was active."
::= { docsQosServiceFlowLogEntry 9 }
-- docsQosServiceFlowLogControl was formerly { docsQosServiceFlowLogEntry 10}
-- and was renumbered in version -04.
docsQosServiceFlowLogDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of docsQosServiceFlowDirection
for the service flow."
::= { docsQosServiceFlowLogEntry 11}
docsQosServiceFlowLogPrimary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of docsQosServiceFlowPrimary for the
service flow."
::= { docsQosServiceFlowLogEntry 12}
docsQosServiceFlowLogServiceClassName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of docsQosParamSetServiceClassName for
the provisioned QOS Parameter Set of the
service flow."
::= { docsQosServiceFlowLogEntry 13}
docsQosServiceFlowLogPolicedDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The final value of docsQosServiceFlowPolicedDropPkts
for the service flow."
::= { docsQosServiceFlowLogEntry 14}
docsQosServiceFlowLogPolicedDelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The final value of docsQosServiceFlowPolicedDelayPkts
for the service flow."
::= { docsQosServiceFlowLogEntry 15}
docsQosServiceFlowLogControl OBJECT-TYPE
SYNTAX INTEGER {
active(1),
destroy(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to the value destroy(6) removes
this entry from the table.
Reading this object return the value active(1)."
::= { docsQosServiceFlowLogEntry 16}
--
-- Service Class Table (CMTS ONLY)
--
docsQosServiceClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of Docsis-QOS
Service Classes in a CMTS. "
::= { docsQosMIBObjects 8 }
docsQosServiceClassEntry OBJECT-TYPE
SYNTAX DocsQosServiceClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A provisioned service class on a CMTS.
Each entry defines a template for certain
DOCSIS QOS Parameter Set values. When a CM
creates or modifies an Admitted QOS Parameter Set for a
Service Flow, it may reference a Service Class
Name instead of providing explicit QOS Parameter
Set values. In this case, the CMTS populates
the QOS Parameter Set with the applicable
corresponding values from the named Service Class.
Subsequent changes to a Service Class row do *not*
affect the QOS Parameter Set values of any service flows
already admitted.
A service class template applies to only
a single direction, as indicated in the
docsQosServiceClassDirection object.
"
INDEX {
docsQosServiceClassName
}
::= { docsQosServiceClassTable 1 }
DocsQosServiceClassEntry ::= SEQUENCE {
docsQosServiceClassName DisplayString (SIZE(1..15)),
docsQosServiceClassStatus RowStatus,
docsQosServiceClassPriority Integer32,
docsQosServiceClassMaxTrafficRate BitRate,
docsQosServiceClassMaxTrafficBurst Unsigned32,
docsQosServiceClassMinReservedRate BitRate,
docsQosServiceClassMinReservedPkt Integer32,
docsQosServiceClassMaxConcatBurst Integer32,
docsQosServiceClassNomPollInterval Unsigned32,
docsQosServiceClassTolPollJitter Unsigned32,
docsQosServiceClassUnsolicitGrantSize Integer32,
docsQosServiceClassNomGrantInterval Unsigned32,
docsQosServiceClassTolGrantJitter Unsigned32,
docsQosServiceClassGrantsPerInterval Integer32,
docsQosServiceClassMaxLatency Unsigned32,
docsQosServiceClassActiveTimeout Integer32,
docsQosServiceClassAdmittedTimeout Integer32,
docsQosServiceClassSchedulingType SchedulingType,
docsQosServiceClassRequestPolicy OCTET STRING (SIZE(4)),
docsQosServiceClassTosAndMask OCTET STRING (SIZE(1)),
docsQosServiceClassTosOrMask OCTET STRING (SIZE(1)),
docsQosServiceClassDirection IfDirection
}
docsQosServiceClassName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Service Class Name. DOCSIS specifies that the
maximum size is 15 printable ASCII characters with
a terminating zero. The terminating zero is not
represented in this DisplayString syntax object.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.3.4"
::= { docsQosServiceClassEntry 1 }
-- docsQosServiceClassParamSetIndex { docsQosServiceClassEntry 2 }
-- was removed in revision -03
docsQosServiceClassStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create or delete rows in this table."
::= { docsQosServiceClassEntry 3 }
docsQosServiceClassPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetPriority."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 4 }
docsQosServiceClassMaxTrafficRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMaxTrafficRate."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 5 }
docsQosServiceClassMaxTrafficBurst OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMaxTrafficBurst."
DEFVAL { 1522 }
::= { docsQosServiceClassEntry 6 }
docsQosServiceClassMinReservedRate OBJECT-TYPE
SYNTAX BitRate
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSEtMinReservedRate."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 7 }
docsQosServiceClassMinReservedPkt OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMinReservedPkt."
::= { docsQosServiceClassEntry 8 }
docsQosServiceClassMaxConcatBurst OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetMaxConcatBurst."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 9 }
docsQosServiceClassNomPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetNomPollInterval."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 10 }
docsQosServiceClassTolPollJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetTolPollJitter."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 11 }
docsQosServiceClassUnsolicitGrantSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetUnsolicitGrantSize."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 12 }
docsQosServiceClassNomGrantInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetNomGrantInterval."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 13 }
docsQosServiceClassTolGrantJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetTolGrantJitter."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 14 }
docsQosServiceClassGrantsPerInterval OBJECT-TYPE
SYNTAX Integer32 (0..127)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetGrantsPerInterval."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 15 }
docsQosServiceClassMaxLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosParamSetClassMaxLatency."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.7.1"
DEFVAL { 0 }
::= { docsQosServiceClassEntry 16 }
docsQosServiceClassActiveTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosServiceFlowActiveTimeout."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 17 }
docsQosServiceClassAdmittedTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosServiceFlowAdmittedTimeout."
DEFVAL { 200 }
::= { docsQosServiceClassEntry 18 }
docsQosServiceClassSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosServiceFlowSchedulingType."
DEFVAL { bestEffort }
::= { docsQosServiceClassEntry 19 }
docsQosServiceClassRequestPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosServiceFlowRequestPolicy."
DEFVAL { '00000000'H } -- no bits are set
::= { docsQosServiceClassEntry 20 }
docsQosServiceClassTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosServiceFlowTosAndMask."
DEFVAL { 'FF'H }
::= { docsQosServiceClassEntry 21 }
docsQosServiceClassTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Template for docsQosServiceFlowTosOrMask."
DEFVAL { '00'H }
::= { docsQosServiceClassEntry 22 }
docsQosServiceClassDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies whether the service class template
applies to upstream or downstream service flows."
DEFVAL { upstream }
::= { docsQosServiceClassEntry 23 }
--
-- Service Class PolicyTable
--
docsQosServiceClassPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceClassPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes the set of Docsis-QOS
Service Class Policies.
This table is an adjunct to the
docsDevFilterPolicy table. Entries in
docsDevFilterPolicy table can point to
specific rows in this table.
This table permits mapping a packet to a service
class name of an active service flow so long as
a classifier does not exist at a higher
priority.
"
REFERENCE "SP-RFIv1.1-I05-000714, Appendix E.2.1"
::= { docsQosMIBObjects 9 }
docsQosServiceClassPolicyEntry OBJECT-TYPE
SYNTAX DocsQosServiceClassPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A service class name policy entry."
INDEX {
docsQosServiceClassPolicyIndex
}
::= { docsQosServiceClassPolicyTable 1 }
DocsQosServiceClassPolicyEntry ::= SEQUENCE {
docsQosServiceClassPolicyIndex Integer32,
docsQosServiceClassPolicyName DisplayString,
docsQosServiceClassPolicyRulePriority Integer32,
docsQosServiceClassPolicyStatus RowStatus
}
docsQosServiceClassPolicyIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index value to uniquely identify an entry in
this table."
::= { docsQosServiceClassPolicyEntry 1 }
docsQosServiceClassPolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Service Class Name to identify the name of the
service class flow to which the packet should be
directed."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix E.2.1"
::= { docsQosServiceClassPolicyEntry 2 }
docsQosServiceClassPolicyRulePriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Service Class Policy rule priority for the
entry."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.1.3.5"
::= { docsQosServiceClassPolicyEntry 3 }
docsQosServiceClassPolicyStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create or delete rows in this table.
This object should not be deleted if it is
reference by an entry in docsDevFilterPolicy.
The reference should be deleted first."
::= { docsQosServiceClassPolicyEntry 4 }
--
-- Payload Header Suppression(PHS) Table
--
docsQosPHSTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPHSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table describes set of payload header
suppression entries."
::= { docsQosMIBObjects 10 }
docsQosPHSEntry OBJECT-TYPE
SYNTAX DocsQosPHSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A payload header suppression entry.
The ifIndex is an ifType of docsCableMaclayer(127).
The index docsQosServiceFlowId selects one
service flow from the cable MAC layer interface.
The docsQosPktClassId index matches an
index of the docsQosPktClassTable.
"
INDEX {
ifIndex,
docsQosServiceFlowId,
docsQosPktClassId
}
::= { docsQosPHSTable 1 }
DocsQosPHSEntry ::= SEQUENCE {
docsQosPHSField OCTET STRING,
docsQosPHSMask OCTET STRING,
docsQosPHSSize Integer32,
docsQosPHSVerify TruthValue,
docsQosPHSIndex Integer32
}
-- The object docsQosPHSIndex used as an index {docsQosPHSEntry 1}
-- was changed to be a non-index column in revision -03.
docsQosPHSField OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression field defines the
bytes of the header which must be
suppressed/restored by the sending/receiving
device.
The number of octets in this object should be
the same as the value of docsQosPHSSize."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.10.1"
::= { docsQosPHSEntry 2 }
docsQosPHSMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression mask defines the
bit mask which used in combination with the
docsQosPHSField defines which bytes in header
must be suppressed/restored by the sending or
receiving device.
Each bit of this bit mask corresponds to a byte
in the docsQosPHSField, with the least
significant bit corresponding to first byte of
the docsQosPHSField.
Each bit of the bit mask specifies whether of
not the corresponding byte should be suppressed
in the packet. A bit value of '1' indicates that
the byte should be suppressed by the sending
device and restored by the receiving device.
A bit value of '0' indicates that
the byte should not be suppressed by the sending
device or restored by the receiving device.
If the bit mask does not contain a bit for each
byte in the docsQosPHSField then the bit mask is
extended with bit values of '1' to be the
necessary length."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.10.3"
::= { docsQosPHSEntry 3 }
docsQosPHSSize OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression size specifies the
number of bytes in the header to be suppressed
and restored.
The value of this object must match the number
of bytes in the docsQosPHSField."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.10.4"
::= { docsQosPHSEntry 4 }
docsQosPHSVerify OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression verification value of
'true' the sender must verify docsQosPHSField
is the same as what is contained in the packet
to be suppressed."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.10.5"
::= { docsQosPHSEntry 5 }
-- Removed dosQosPHSClassifierIndex {docsQosPHSEntry 6}
-- in revision -03.
docsQosPHSIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload header suppression index uniquely
references the PHS rule for a given service flow."
REFERENCE "SP-RFIv1.1-I05-000714, Appendix C.2.2.10.2"
::= { docsQosPHSEntry 7 }
--
-- docsQosCmtsMacToSrvFlowTable (CMTS Only)
--
docsQosCmtsMacToSrvFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmtsMacToSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table provide for referencing the service flows
associated with a particular cable modem. This allows
for indexing into other docsQos tables that are
indexed by docsQosServiceFlowId and ifIndex."
::= { docsQosMIBObjects 11 }
docsQosCmtsMacToSrvFlowEntry OBJECT-TYPE
SYNTAX DocsQosCmtsMacToSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry is created by CMTS for each service flow
connected to this CMTS."
INDEX {
docsQosCmtsCmMac,
docsQosCmtsServiceFlowId
}
::= { docsQosCmtsMacToSrvFlowTable 1 }
DocsQosCmtsMacToSrvFlowEntry ::= SEQUENCE {
docsQosCmtsCmMac MacAddress,
docsQosCmtsServiceFlowId Unsigned32,
docsQosCmtsIfIndex InterfaceIndex
}
docsQosCmtsCmMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address for the referenced CM."
::= { docsQosCmtsMacToSrvFlowEntry 1 }
docsQosCmtsServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index assigned to a service flow by CMTS."
::= { docsQosCmtsMacToSrvFlowEntry 2 }
docsQosCmtsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ifIndex of ifType docsCableMacLayter(127)
on the CMTS that is connected to the Cable Modem."
::= { docsQosCmtsMacToSrvFlowEntry 3 }
--
-- Placeholder for notifications/traps.
--
docsQosNotification OBJECT IDENTIFIER ::= { docsQosMIB 2 }
--
-- Conformance definitions
--
docsQosConformance OBJECT IDENTIFIER ::= { docsQosMIB 3 }
docsQosGroups OBJECT IDENTIFIER ::= { docsQosConformance 1 }
docsQosCompliances OBJECT IDENTIFIER ::= { docsQosConformance 2 }
docsQosCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for MCNS Cable Modems and
Cable Modem Termination Systems that implement DOCSIS
Service Flows."
MODULE -- docsQosMIB
MANDATORY-GROUPS { docsQosBaseGroup }
GROUP docsQosCmtsGroup
DESCRIPTION
"This group is mandatory for only Cable Modem Termination
Systems (CMTS) and not implemented for Cable Modems."
GROUP docsQosParamSetGroup
DESCRIPTION
"This group is mandatory for Cable Modem Termination
Systems (CMTS) and Cable Modems. Cable modems only implement
objects in this group as read-only."
GROUP docsQosSrvClassPolicyGroup
DESCRIPTION
"This group is optional for Cable Modem Termination
Systems (CMTS) and Cable Modems. This group only needs to
be implement if policy based service flow classification
is implemented. See docsDevPolicyTable in
DOCS-CABLE-DEVICE-MIB for more details. "
GROUP docsQosServiceClassGroup
DESCRIPTION
"The docsQosServiceClassTable group of objects. "
OBJECT docsQosPktClassPkts
DESCRIPTION
"This object only needs to be implemented in entries
that are classifying packets and not policing packets."
::= { docsQosCompliances 1 }
docsQosBaseGroup OBJECT-GROUP
OBJECTS {
docsQosPktClassDirection,
docsQosPktClassPriority,
docsQosPktClassIpTosLow,
docsQosPktClassIpTosHigh,
docsQosPktClassIpTosMask,
docsQosPktClassIpProtocol,
docsQosPktClassIpSourceAddr,
docsQosPktClassIpSourceMask,
docsQosPktClassIpDestAddr,
docsQosPktClassIpDestMask,
docsQosPktClassSourcePortStart,
docsQosPktClassSourcePortEnd,
docsQosPktClassDestPortStart,
docsQosPktClassDestPortEnd,
docsQosPktClassDestMacAddr,
docsQosPktClassDestMacMask,
docsQosPktClassSourceMacAddr,
docsQosPktClassEnetProtocolType,
docsQosPktClassEnetProtocol,
docsQosPktClassUserPriLow,
docsQosPktClassUserPriHigh,
docsQosPktClassVlanId,
docsQosPktClassState,
docsQosPktClassPkts,
docsQosPktClassBitMap,
docsQosServiceFlowSID,
docsQosServiceFlowDirection,
docsQosServiceFlowPrimary,
docsQosServiceFlowPkts, -- not sure if CM should implement
docsQosServiceFlowOctets,
docsQosServiceFlowTimeCreated,
docsQosServiceFlowTimeActive,
docsQosServiceFlowPHSUnknowns,
docsQosServiceFlowPolicedDropPkts,
docsQosServiceFlowPolicedDelayPkts,
docsQosDSAReqs,
docsQosDSARsps,
docsQosDSAAcks,
docsQosDSCReqs,
docsQosDSCRsps,
docsQosDSCAcks,
docsQosDSDReqs,
docsQosDSDRsps,
docsQosDynamicAdds,
docsQosDynamicAddFails,
docsQosDynamicChanges,
docsQosDynamicChangeFails,
docsQosDynamicDeletes,
docsQosDynamicDeleteFails,
docsQosDCCReqs,
docsQosDCCRsps,
docsQosDCCAcks,
docsQosDCCs,
docsQosDCCFails,
docsQosPHSField,
docsQosPHSMask,
docsQosPHSSize,
docsQosPHSVerify,
docsQosPHSIndex
}
STATUS current
DESCRIPTION
"Group of objects implemented in both Cable Modems and
Cable Modem Termination Systems."
::= { docsQosGroups 1 }
docsQosParamSetGroup OBJECT-GROUP
OBJECTS {
docsQosParamSetServiceClassName,
docsQosParamSetPriority,
docsQosParamSetMaxTrafficRate,
docsQosParamSetMaxTrafficBurst,
docsQosParamSetMinReservedRate,
docsQosParamSetMinReservedPkt,
docsQosParamSetActiveTimeout,
docsQosParamSetAdmittedTimeout,
docsQosParamSetMaxConcatBurst,
docsQosParamSetSchedulingType,
docsQosParamSetNomPollInterval,
docsQosParamSetTolPollJitter,
docsQosParamSetUnsolicitGrantSize,
docsQosParamSetNomGrantInterval,
docsQosParamSetTolGrantJitter,
docsQosParamSetGrantsPerInterval,
docsQosParamSetTosAndMask,
docsQosParamSetTosOrMask,
docsQosParamSetMaxLatency,
docsQosParamSetRequestPolicyOct,
docsQosParamSetBitMap
}
STATUS current
DESCRIPTION
"Group of objects implemenent in both Cable Modems and
Cable Modem Termination Systems for QOS parameter sets."
::= { docsQosGroups 2 }
docsQosCmtsGroup OBJECT-GROUP
OBJECTS {
docsQosUpstreamFragments,
docsQosUpstreamFragDiscards,
docsQosUpstreamConcatBursts,
docsQosServiceFlowLogIfIndex,
docsQosServiceFlowLogSFID,
docsQosServiceFlowLogCmMac,
docsQosServiceFlowLogPkts,
docsQosServiceFlowLogOctets,
docsQosServiceFlowLogTimeDeleted,
docsQosServiceFlowLogTimeCreated,
docsQosServiceFlowLogTimeActive,
docsQosServiceFlowLogDirection,
docsQosServiceFlowLogPrimary,
docsQosServiceFlowLogServiceClassName,
docsQosServiceFlowLogPolicedDropPkts,
docsQosServiceFlowLogPolicedDelayPkts,
docsQosServiceFlowLogControl,
docsQosCmtsIfIndex -- docsQosCmtsMacToSrvFlowTable required
}
STATUS current
DESCRIPTION
"Mandatory group of objects implemented only in the CMTS."
::= { docsQosGroups 3 }
docsQosSrvClassPolicyGroup OBJECT-GROUP
OBJECTS {
docsQosServiceClassPolicyName,
docsQosServiceClassPolicyRulePriority,
docsQosServiceClassPolicyStatus
}
STATUS current
DESCRIPTION
"Group of objects implemented in both Cable Modems and
Cable Modem Termination Systems when supporting policy based
service flows."
::= { docsQosGroups 4 }
docsQosServiceClassGroup OBJECT-GROUP
OBJECTS {
docsQosServiceClassStatus,
docsQosServiceClassPriority,
docsQosServiceClassMaxTrafficRate,
docsQosServiceClassMaxTrafficBurst,
docsQosServiceClassMinReservedRate,
docsQosServiceClassMinReservedPkt,
docsQosServiceClassMaxConcatBurst,
docsQosServiceClassNomPollInterval,
docsQosServiceClassTolPollJitter,
docsQosServiceClassUnsolicitGrantSize,
docsQosServiceClassNomGrantInterval,
docsQosServiceClassTolGrantJitter,
docsQosServiceClassGrantsPerInterval,
docsQosServiceClassMaxLatency,
docsQosServiceClassActiveTimeout,
docsQosServiceClassAdmittedTimeout,
docsQosServiceClassSchedulingType,
docsQosServiceClassRequestPolicy,
docsQosServiceClassTosAndMask,
docsQosServiceClassTosOrMask,
docsQosServiceClassDirection
}
STATUS current
DESCRIPTION
"The docsQosServiceClassTable objects. If a CMTS implements
expansion of Service Class Names in a QOS Parameter Set,
this group is mandatory on the CMTS. If the CMTS does not
support Service Class Names, this group may be unimplemented
in the CMTS. This group is not implemented on the CM.
"
::= { docsQosGroups 5 }
END
Reference in New Issue Copy Permalink