mibs/MIBS/arris/d5/SIM-MIB

SIM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, IpAddress, BITS, enterprises 
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus, DisplayString 
        FROM SNMPv2-TC 
    MODULE-COMPLIANCE, OBJECT-GROUP 
        FROM SNMPv2-CONF;

simMIB MODULE-IDENTITY
   LAST-UPDATED "9707021700Z"
ORGANIZATION "DVB Simulcrypt Technical Group" CONTACT-INFO " --- "
   DESCRIPTION
"The MIB module for defining DVB Simulcrypt Conditional
 Access System configuration information."
 ::= { enterprises 2696  1  1 }

ECMGCSuCasId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
       "Adding this to fix compile issue"
   SYNTAX Unsigned32

Signed16 ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
       "Adding this to fix compile issue"
   SYNTAX INTEGER (0..65535)

AdministrativeState ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Administrative state as defined by ITU-T Recommendation X.734"
   SYNTAX BITS
   {
      locked(0),
      unlocked(1),
      shuttingDown(2)
   }

CaDescInsMode ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Conditional Access Descriptor Insertion Type."
   SYNTAX BITS
   {
      psigInsertion(0),
      noPsigInsertion(1)
   }

DelayType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Delay type."
   SYNTAX BITS
   {
      immediate(0),
      synchronized(1)
   }
 
DescriptorStatus ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The return status of descriptor insertion."
   SYNTAX BITS
   {
      success(0),
      unknownTrigger(1),
      unknownLocation(2),
      unsupportedDelay(3),
      unknownContext(4),
      unknownOtherTS(5),
      unknownNetwork(6),
      unknownTS(7),
      unknownES(8),
      unknownBouquet(9),
      unknownEvent(10),
      tableNotSupported(11),
      tableFull(12),
      other(13)
   }
 
ECMGChannelId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The ECM_channel_ID is represented as a 2 bytes unsigned integer." 
SYNTAX INTEGER (0..65535)

ECMGDelayValue ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The value od xxx_Delay_Start / _Stop in ECMG protocol."
   SYNTAX Signed16

ECMTriggerType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The type of an ECM trigger in a PSI generator."
   SYNTAX BITS
   {
      ecmStreamOpen(0),
      ecmStreamClose(1),
      ecmStreamChange(2),
      accessCriteriaChange(3)
   }

EMMGChannelId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Indicates the Data Channel Id." 
SYNTAX INTEGER (0..65535)

EMMGCommCapability ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Type of communications capability between EMMG/PDG and Multiplexer:
 TCP or UDP or both."
   SYNTAX BITS
   {
      both(0),
      tcp(1),
      udp(2)
   }

EMMGCommType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Type of communications capability between EMMG/PDG and Multiplexer:
 TCP or UDP."
   SYNTAX BITS
   {
      tcp(0),
      udp(1)
   }

EMMGDataType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Type of data carried in the EMMG/PDG Multiplexer stream."
   SYNTAX BITS
   {
      emm(0),
      other(1)
   }
 
FlowId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The flow identifier is represented as a 2 bytes unsigned integer." 
SYNTAX INTEGER (0..65535)

FlowType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Type of Flow: EMM, ECM, or private data."
   SYNTAX BITS
   {
      ecm(0),
      emm(1),
      privatedata(2)
   }

InsertLocation ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Descriptor insertion location."
   SYNTAX BITS
   {
      pmtLoop1(0),
      pmtLoop2(1),
      cat(2),
      nitLopp1ActualNet(3),
      nitLoop2ActualNet(4),
      nitLopp1OtherNet(5),
      nitLoop2OtherNet(6),
      batLoop1(7),
      batLoop2(8),
      sdtActualTS(9),
      sdtOtherTS(10),
      eitPFActualTS(11),
      eitPFOtherTS(12),
      eitScheduleActualTS(13),
      eitScheduleOtherTS(14)
   }

ProvTableId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Provision table identifier."
   SYNTAX BITS
   {
      pat(0),
      cat(1),
      pmt(2),
      nitActualNet(3),
      nitOtherNet(4),
      bat(5),
      sdtActualTS(6),
      sdtOtherTS(7),
      eitPFActualTS(8),
      eitPFOtherTS(9),
      eitScheduleActualTS(10),
      eitScheduleOtherTS(11)
   }

PsigType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
      "Psig type."
   SYNTAX BITS
   {
      sig(0),
      psig(1),
      psisig(2)
   }
 
SectionTSPktFlag ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"Format of ECM, EMM, Private data datagrams: section or TS packet."
   SYNTAX BITS
   {
      section(0),
      tspacket(1)
   }

StreamId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The Stream_ID is represented as a 2 bytes unsigned integer." 
SYNTAX INTEGER (0..65535)

SuperCasId ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"SuperCASId / Client_ID: a unsigned 32-bit identifier."
   SYNTAX Unsigned32

TriggerType ::= TEXTUAL-CONVENTION
   STATUS current
   DESCRIPTION
"The type of a trigger in a PSI generator."
   SYNTAX BITS
   {
      dvbEvent(0),
      futureDvbEvent(1),
      newEcmStream(2),
      flowPidChange(3),
      accessCriteriaChange(4),
      ecmStreamClosure(5),
      pdStreamCEvent(6)
   }


simMIBObjects	OBJECT IDENTIFIER ::= { simMIB 1 }
simMIBConformance	OBJECT IDENTIFIER ::= { simMIB 2 } 

simIdent	OBJECT IDENTIFIER ::= { simMIBObjects 1 } 
simECMG	OBJECT IDENTIFIER ::= { simMIBObjects 2 } 
simEMMG	OBJECT IDENTIFIER ::= { simMIBObjects 3 } 
simCPSI	OBJECT IDENTIFIER ::= { simMIBObjects 4 } 
simPSI	OBJECT IDENTIFIER ::= { simMIBObjects 5 }


-- ---------------------------------------------------------------------------------
-- Ident Group - This group is used for software configuration management
-- of all Simulcrypt components and includes the following objects:
--

simSofwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (80))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This contains a display string that defines the current version
 of the software for this unit."
 ::= { simIdent 1 }

simMIBVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (80))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This contains a display string that defines the current version
 of the MIB."
 ::= { simIdent 2}

simMIBPrivateVersion OBJECT-TYPE
   SYNTAX DisplayString (SIZE (80))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This contains a display string that defines the current private
 version of the MIB."
 ::= { simIdent 3}

simAgentVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (80))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This contains a display string that defines the current version
 of the agent."
 ::= { simIdent 4 }


-- ---------------------------------------------------------------------------------
-- ECM Generator Group - This group is used for configuration management and status
-- monitoring of ECM Generators. It identifies each one of the ECM Generators by the
-- IP Address and TCP/UDP Port Number. It also associates Super_CAS_IDs, ECM_Channel_IDs,
-- and ECM_Stream_IDs with ECM Generators. It also associates status information and
-- statistics with channels and streams. The ECM Generator Group consists of three
-- conceptual tables. The first table is the interconnection table and is used for
-- the Headend Network Manager to query the IP addresses and the port number to be used
-- by an SCS to create a channel. It is indexed by a unique EcmgIndex which is an integer
-- assigned by the ECMG agent.
--

simEcmgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEcmgEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table specifies the IP addresses and Port numbers of ECM Generators
 to be used by headend managers to configure SCSs. This table is to be
 used in ECM Generators and ECM Generator proxies."
 ::= { simECMG 1 }

simEcmgEntry OBJECT-TYPE
   SYNTAX SimEcmgEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. Depending on whether this is
an ECMG agent or ECMG proxy agent different table entries can 
be omitted." 
INDEX { simEcmgIndex}
 ::= { simEcmgTable 1 }

SimEcmgEntry ::= SEQUENCE {
   simEcmgIndex      INTEGER ,
   simEcmgIpAddress   IpAddress,
   simEcmgTcpPort	   INTEGER,
   simEcmgSuCasId	   SuperCasId,
   simEcmgChannels    Counter32,
   simEcmgCwPrs      Counter32,
   simEcmgErrs       Counter32,
   simEcmgTargetCpsig	INTEGER,
   simEcmgCaMib	   OBJECT IDENTIFIER
}

simEcmgIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The ECM Generator Table unique index."
 ::= { simEcmgEntry 1 }

simEcmgIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"IP address of the host of the ECMG."
 ::= { simEcmgEntry 2 }

simEcmgTcpPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"TCP port of the ECMG."
 ::= { simEcmgEntry 3 }

simEcmgSuCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The Super_VAS_ID is formed by concatenation of the CA_system_id
 (16 bit) and the CA_subsystem_ID (16 bit). It defines uniquely a
 set of ECMGs for a given SCS."
 ::= { simEcmgEntry 4 }

simEcmgChannels OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of channels this ECMG is currently maintaining."
 ::= { simEcmgEntry 5 }

simEcmgCwPrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of CW provisioning requests received by this ECMG."
 ::= { simEcmgEntry 6 }

simEcmgErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communications errors for this ECMG."
 ::= { simEcmgEntry 7 } 

simEcmgTargetCpsig OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The index into the C(P)SIG table identifying the C(P)SIG associated
 with this ECMG."
 ::= { simEcmgEntry 8 }

simEcmgCaMib OBJECT-TYPE
   SYNTAX OBJECT IDENTIFIER
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The pointer to a provider proprietary MIB (like ifSpecific 
in the interfaces group of MIB II."
 ::= { simEcmgEntry 9 }

-- ---------------------------------------------------------------------------------
-- ECMG Channel Table - Used for monitoring channel information. It is indexed
-- by the ECMG Index from the ECMG table and the ChannelId.
--

simEcmgCTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEcmgCEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table specifies information relating to ECMG/SCS channels including
 the IP addresses and Port numbers of SCSs communicating
 with the ECMG Generators. "
 ::= { simECMG 2 }

simEcmgCEntry OBJECT-TYPE
   SYNTAX SimEcmgCEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. Depending on whether this is
 an ECMG agent or ECMG proxy agent different table entries can be 
 omitted." 
INDEX { simEcmgIndex, simEcmgChannelId}
 ::= { simEcmgCTable 1 }

SimEcmgCEntry ::= SEQUENCE {
   simEcmgChannelId      ECMGChannelId,
   simEcmgCScsIpAddress   IpAddress,
   simEcmgCScsTcpPort	   INTEGER,
   simEcmgCStreams       Counter32,
   simEcmgCCwPrs	      Counter32,
   simEcmgCErrs         Counter32,
   simEcmgCSuCasId       ECMGCSuCasId,
   simEcmgFormat	      SectionTSPktFlag,
   simACDelayStart       ECMGDelayValue,
   simACDelayStop	      ECMGDelayValue,
   simDelayStart	      ECMGDelayValue,
   simDelayStop         ECMGDelayValue,
   simTransitionDelayStart ECMGDelayValue,
   simTransitionDelayStop	ECMGDelayValue,
   simECMRepPeriod       INTEGER,
   simMaxStreams	      Counter32,
   simMinCPDuration      INTEGER,
   simLeadCW	         Counter32,
   simCWPerMsg          Counter32,
   simMaxCompTime	      INTEGER
   }

simEcmgChannelId OBJECT-TYPE
   SYNTAX ECMGChannelId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The ECMG/SCS Channel identifier."
 ::= { simEcmgCEntry 1 }

simEcmgCScsIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"IP address of the SCS."
 ::= { simEcmgCEntry 2 } 

simEcmgCScsTcpPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"TCP port of the SCS."
 ::= { simEcmgCEntry 3 }

simEcmgCStreams OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of streams this ECMG is currently maintaining on this channel."
 ::= { simEcmgCEntry 4 }

simEcmgCCwPrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
 "The total number of CW provisioning requests received by this ECMG on this channel."
 ::= { simEcmgCEntry 5 }

simEcmgCErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
 		"The total number of communications errors for this ECMG on this channel."
 ::= { simEcmgCEntry 6 }

simEcmgCSuCasId OBJECT-TYPE
   SYNTAX ECMGCSuCasId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
 		"The SuperCASId of the current Channel."
 ::= { simEcmgCEntry 7 }

simEcmgFormat OBJECT-TYPE
   SYNTAX SectionTSPktFlag
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
  		"Format of datagrams : section or TS Packet."
 ::= { simEcmgCEntry 8 }

simACDelayStart OBJECT-TYPE
   SYNTAX ECMGDelayValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Value of AC_Delay_Start parameter in ECMG protocol, imposed by CAS."
 ::= { simEcmgCEntry 9 }

simACDelayStop OBJECT-TYPE
   SYNTAX ECMGDelayValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Value of AC_Delay_Stop parameter in ECMG protocol, imposed by CAS."
 ::= { simEcmgCEntry 10 }

simDelayStart OBJECT-TYPE
   SYNTAX ECMGDelayValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Value of Delay_Start parameter in ECMG protocol, imposed by CAS."
 ::= { simEcmgCEntry 11 }

simDelayStop OBJECT-TYPE
   SYNTAX ECMGDelayValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Value of Delay_Stop parameter in ECMG protocol, imposed by CAS."
 ::= { simEcmgCEntry 12 }

simTransitionDelayStart OBJECT-TYPE
   SYNTAX ECMGDelayValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Value of Transition_Delay_Start parameter in ECMG protocol, imposed by CAS."
 ::= { simEcmgCEntry 13 }

simTransitionDelayStop OBJECT-TYPE
   SYNTAX ECMGDelayValue
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Value of Transition_Delay_Stop parameter in ECMG protocol, imposed by CAS."
 ::= { simEcmgCEntry 14 }

simECMRepPeriod OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Repeating period of ECM defined by CAS and applied by SCS."
 ::= { simEcmgCEntry 15 }

simMaxStreams OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Max number of streams supported by the ECMG."
 ::= { simEcmgCEntry 16 }

simMinCPDuration OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Min crypto-period length supported by the ECMG."
 ::= { simEcmgCEntry 17 }

simLeadCW OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Number of CW the ecmg needs in advance."
 ::= { simEcmgCEntry 18 }

simCWPerMsg OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Number of CW the ecmg needs in each ECM request."
 ::= { simEcmgCEntry 19 }

simMaxCompTime OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Max delay supported by the ECMG for providing an ECM."
 ::= { simEcmgCEntry 20 }


-- ---------------------------------------------------------------------------------
-- ECMG Stream Table - Used for monitoring stream information. It is indexed
-- by the ECMG Index from the ECMG table, the ChannelId from the Channel Table
-- and the StreamId.
--

simEcmgSTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEcmgSEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table specifies information relating to ECMG/SCS streams. "
 ::= { simECMG 3 }

simEcmgSEntry OBJECT-TYPE
   SYNTAX SimEcmgSEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. Depending on whether this is
an ECMG agent or ECMG proxy agent different table entries can be omitted." 
   INDEX { simEcmgIndex, simEcmgChannelId, simEcmgStreamId}
 ::= { simEcmgSTable 1 }

SimEcmgSEntry ::= SEQUENCE {
   simEcmgStreamId    StreamId,
   simEcmgEcmId      FlowId,
   simEcmgSLastCp	   Unsigned32,
   simEcmgSCwPrs	   Counter32,
   simEcmgSErrs      Counter32
   }

simEcmgStreamId OBJECT-TYPE
   SYNTAX StreamId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The ECMG/SCS Stream identifier."
 ::= { simEcmgSEntry 1 }

simEcmgEcmId OBJECT-TYPE
   SYNTAX FlowId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The unique ECM flow identifier."
 ::= { simEcmgSEntry 2 }

simEcmgSLastCp OBJECT-TYPE
   SYNTAX Unsigned32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The number of the crypto-period last processed on this stream."
 ::= { simEcmgSEntry 3 }

simEcmgSCwPrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of CW provisioning requests received by this ECMG on this stream."
 ::= { simEcmgSEntry 4 }

simEcmgSErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communications errors for this ECMG on this stream."
 ::= { simEcmgSEntry 5 }

-- ---------------------------------------------------------------------------------
-- EMM/PD Generator Group - This group is used for management of EMM/PD Generators.
-- It identifies each one of the EMM/PD Generators by the IP Address and TCP/UDP Port
-- Number.It also associates Client_IDs, Data_stream_IDs, and Data_Channel_IDs with EMM/PD
-- Generators. It also associates status information and statistics with streams. The
-- EMMG/PDG Generator Group consists of four conceptual tables. The first table is used
-- for information relevant to EMMG/PDG and is indexed by a unique EmOrPdIndex which is
-- assigned by the EMMG/PDG agent.
--

simEmOrPdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEmOrPdEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table defines the EMMG or PDG interfaces to the MUX and is to be
 used in EMMGs/PDGs and optionally the multiplexer."
 ::= { simEMMG 1 }

simEmOrPdEntry OBJECT-TYPE
   SYNTAX SimEmOrPdEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. Depending on whether this is an
 EMMG/PDG or multiplexer agent different table entries can be omitted." 
   INDEX { simEmOrPdIndex }
 ::= { simEmOrPdTable 1 }

SimEmOrPdEntry ::= SEQUENCE {
   simEmOrPdIndex	      INTEGER,
   simEmOrPdDataType	   EMMGDataType,
   simEmOrPdClientId	   SuperCasId,
   simEmOrPdCommCapability EMMGCommCapability,
   simEmOrPdErrs	      Counter32,
   simEmOrPdTargetCpsig   INTEGER,
   simEmOrPdCaMib	      OBJECT IDENTIFIER
   }

simEmOrPdIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Unique index into the EMMG or PDG table. "
 ::= { simEmOrPdEntry 1 }

simEmOrPdDataType OBJECT-TYPE
   SYNTAX EMMGDataType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Data_type: Type of data handled by this EMMG/PDG. "
 ::= { simEmOrPdEntry 2 }

simEmOrPdClientId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Client_ID: The Client_ID is a 32-bit identifier. It shall identify uniquely
 an EMMG/PDG across all the EMMGs/PDGs connected to a given MUX. To facilitate
 uniqueness of this value, the following rules apply:
* In the case of EMMs or other CA related data, the two first bytes of the
 client_id should be equal to the two bytes of the corresponding CA_system_ID.
* In other cases a value allocated by DVB for this purpose should be used."
 ::= { simEmOrPdEntry 3 }

simEmOrPdCommCapability OBJECT-TYPE
   SYNTAX EMMGCommCapability
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Communication capability between EMMG/PDG and the multiplexer. Currently
 TCP or UDP or both."
 ::= { simEmOrPdEntry 4 }

simEmOrPdErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communications errors for this EMMG/PDG."
 ::= { simEmOrPdEntry 5 }

simEmOrPdTargetCpsig OBJECT-TYPE
   SYNTAX	INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The index into the C(P)SIG table identifying the C(P)SIG associated
 with this EMMG/PDG."
 ::= { simEmOrPdEntry 6 }

simEmOrPdCaMib OBJECT-TYPE
   SYNTAX OBJECT IDENTIFIER
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Pointer to a vendor proprietary extension to the EMMG/PDG MIB group."
 ::= { simEmOrPdEntry 7 }


-- ---------------------------------------------------------------------------------
-- EMMG/PDG Logical Access Point Table - The second EMM Generator/ PD Generator table
-- is used for configuration of the EMMGs/PDGs. It is uniquely indexed by the
-- EmOrPdLapIndex which is a globally assigned quantity (with respect to the headend)
-- and associates globally assigned Logical Access Points (LAPs) with mux ports.
--

simEmOrPdLapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEmOrPdLapEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is used for configuration of EMM/PD Generators."
 ::= { simEMMG 2 }

simEmOrPdLapEntry OBJECT-TYPE
   SYNTAX SimEmOrPdLapEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry." 
   INDEX { simEmOrPdLapIndex }
 ::= { simEmOrPdLapTable 1 }

SimEmOrPdLapEntry ::= SEQUENCE {
   simEmOrPdLapIndex	      INTEGER,
   simEmOrPdLapAdminState	   AdministrativeState,
   simEmOrPdLapCommType      EMMGCommType,
   simEmOrPdLapMuxIpAddress   IpAddress,
   simEmOrPdLapMuxPort       INTEGER,
   simEmOrPdLapStatus	      RowStatus,
   simEmOrPdLapMuxUIpAddress	IpAddress,
   simEmOrPdLapMuxUPort      INTEGER
   }

simEmOrPdLapIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Unique Logical Access Point (LAP) identifier. "
 ::= { simEmOrPdLapEntry 1 }

simEmOrPdLapAdminState OBJECT-TYPE
   SYNTAX AdministrativeState
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
" Used by an authorized manager to lock a conceptual row for exclusive
 write and create access."
 ::= { simEmOrPdLapEntry 2 }

simEmOrPdLapCommType OBJECT-TYPE
   SYNTAX EMMGCommType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Type of communication between EMMG/PDG and the multiplexer. Currently TCP or UDP."
 ::= { simEmOrPdLapEntry 3}

simEmOrPdLapMuxIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"IP address of the multiplexer for EMMG/PDG TCP communication."
 ::= { simEmOrPdLapEntry 4 }

simEmOrPdLapMuxPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Port number (TCP) of the multiplexer for EMMG/PDG TCP communication."
 ::= { simEmOrPdLapEntry 5 }

simEmOrPdLapStatus OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Used for table row creation management."
 ::= { simEmOrPdLapEntry 6 }

simEmOrPdLapMuxUIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"IP address of the multiplexer for EMMG/PDG UDP communication."
 ::= { simEmOrPdLapEntry 7 } 

simEmOrPdLapMuxUPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Port number (UDP) of the multiplexer for EMMG/PDG UDP communication."
 ::= { simEmOrPdLapEntry 8 }

-- ---------------------------------------------------------------------------------
-- EMMG/PDG Logical Access Point Group Table - The third EMM Generator/ PD Generator table 
-- is used for configuration of the EMMGs/PDG. It associates LAP Groups and LAPs and is
-- uniquely indexed by the EmOrPdLapGroup, and EmOrPdLapIndex.
--

simEmOrPdLapGTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEmOrPdLapGEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is used for configuration of EMM/PD Generators."
 ::= { simEMMG 3 }

simEmOrPdLapGEntry OBJECT-TYPE
   SYNTAX SimEmOrPdLapGEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry." 
INDEX { simEmOrPdLapGroup, simEmOrPdLapIndex }
 ::= { simEmOrPdLapGTable 1 }

SimEmOrPdLapGEntry ::= SEQUENCE {
   simEmOrPdLapGroup	   INTEGER,
   simEmOrPdLapGAdminState AdministrativeState,
   simEmOrPdLapGStatus    RowStatus
   }

simEmOrPdLapGroup OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Logical Access Point (LAP) group. "
 ::= { simEmOrPdLapGEntry 1 }

simEmOrPdLapGAdminState OBJECT-TYPE
   SYNTAX AdministrativeState
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
" Used by an authorized manager to lock a conceptual row for exclusive
 write and create access."
 ::= { simEmOrPdLapGEntry 2 }

simEmOrPdLapGStatus OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Used for table row creation management."
 ::= { simEmOrPdLapGEntry 3 }
 
-- ---------------------------------------------------------------------------------
-- EMMG/PDG Channel Table - Used for monitoring of EMM / PD Generator channels.
--

simEmOrPdCTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEmOrPdCEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is used for monitoring of channels between Muxes and EMMGs/PDGs."
 ::= { simEMMG 4 }

simEmOrPdCEntry OBJECT-TYPE
   SYNTAX SimEmOrPdCEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry."
INDEX { simEmOrPdIndex, simEmOrPdLapIndex, simEmOrPdChannelId }
 ::= { simEmOrPdCTable 1 }

SimEmOrPdCEntry ::= SEQUENCE {
   simEmOrPdChannelId	   EMMGChannelId,
   simEmOrPdCommType	   EMMGCommType,
   simEmOrPdCIpAddress    IpAddress,
   simEmOrPdCPort	      INTEGER,
   simEmOrPdCErrs	      Counter32,
   simEmOrPdCFormat       SectionTSPktFlag,
   simEmOrPdCUIpAddress   IpAddress,
   simEmOrPdCUPort       INTEGER
   }

simEmOrPdChannelId OBJECT-TYPE
   SYNTAX EMMGChannelId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Data_channel_ID: This identifier uniquely identifies a
 EMM/Private Data channel within a client_ID."
 ::= { simEmOrPdCEntry 1 }

simEmOrPdCommType OBJECT-TYPE
   SYNTAX EMMGCommType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Communications type: TCP or UDP."
 ::= { simEmOrPdCEntry 2 }

simEmOrPdCIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"IP address of the host of the EMMG or PDG."
 ::= { simEmOrPdCEntry 3 }

simEmOrPdCPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Port number *TCP or UDP of the EMMG or PDG."
 ::= { simEmOrPdCEntry 4 }

simEmOrPdCErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communications errors on this channel."
 ::= { simEmOrPdCEntry 5 }

simEmOrPdCFormat OBJECT-TYPE
   SYNTAX SectionTSPktFlag
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Format of datagrams : section or TS Packet."
 ::= { simEmOrPdCEntry 6 }

simEmOrPdCUIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"IP address of the host of the EMMG or PDG for UDP."
 ::= { simEmOrPdCEntry 7 }

simEmOrPdCUPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Port number (UDP) of the EMMG or PDG."
 ::= { simEmOrPdCEntry 8 }
 
-- ---------------------------------------------------------------------------------
-- EMMG/PDG Stream Table - Used for monitoring of EMM / PD Generator streams.
--

simEmOrPdSTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimEmOrPdSEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is used for monitoring of streams between Muxes and EMMGs/PDGs."
 ::= { simEMMG 5 }

simEmOrPdSEntry OBJECT-TYPE
   SYNTAX SimEmOrPdSEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry."
   INDEX { simEmOrPdIndex, simEmOrPdLapIndex, simEmOrPdDataId }
 ::= { simEmOrPdSTable 1 }

SimEmOrPdSEntry ::= SEQUENCE {
   simEmOrPdDataId       FlowId,
   simEmOrPdSChannelId    EMMGChannelId,
   simEmOrPdBwidth       Unsigned32,
   simEmOrPdStreamId	   StreamId,
   simEmOrPdSErrs	      Counter32,
   simEmOrPdSBytes       Counter32,
   simEmOrPdSReqBwidth    Unsigned32
   }

simEmOrPdDataId OBJECT-TYPE
   SYNTAX FlowId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"DataID: This identifier uniquely identifies a EMM/Private Data stream."
 ::= { simEmOrPdSEntry 1 }

simEmOrPdSChannelId OBJECT-TYPE
   SYNTAX EMMGChannelId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Channel identifier."
 ::= { simEmOrPdSEntry 2 }

simEmOrPdBwidth OBJECT-TYPE
   SYNTAX Unsigned32
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Negotiated Bandwidth."
 ::= { simEmOrPdSEntry 3 }

simEmOrPdStreamId OBJECT-TYPE
   SYNTAX StreamId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Data_stream_ID: This identifier uniquely identifies a EMM/Private
 Data stream within a channel."
 ::= { simEmOrPdSEntry 4 }

simEmOrPdSErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communications errors on this stream."
 ::= { simEmOrPdSEntry 5 }

simEmOrPdSBytes OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of bytes sent by this EMMG/PDG on this stream."
 ::= { simEmOrPdSEntry 6 }

simEmOrPdSReqBwidth OBJECT-TYPE
   SYNTAX Unsigned32
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
" Bandwidth as requested by CAS."
 ::= { simEmOrPdSEntry 7 }

-- ---------------------------------------------------------------------------------
-- C(P)SIG) Group - This Group is used for management of some aspects of interaction
-- between the custom PSI Generators (C(P)SIG)) and the PSI Generator. It consists of
-- three tables. The first table is used for advertising C(P)SIG) information by the
-- C(P)SIG) host. The second table is used for the manager to configure the C(P)SIG).
-- The third and fourth tables are used for C(P)SIG) channel and stream monitoring.
--


simCpsigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimCpsigEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table defines the C(P)SIG) interfaces to the Mux and is to be
 used in the C(P)SIG and optionally the multiplexer."
 ::= { simCPSI 1 }

simCpsigEntry OBJECT-TYPE
   SYNTAX SimCpsigEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. Depending on whether this is an
 EMMG/PDG or multiplexer agent different table entries can be omitted." 
   INDEX { simCpsigIndex }
 ::= { simCpsigTable 1 }

SimCpsigEntry ::= SEQUENCE {
   simCpsigIndex	      INTEGER,
   simCpsigSuperCasId	   SuperCasId,
   simCpsigErrs         Counter32,
   simCpsigChannels      Counter32,
   simCpsigCpsigIpAddress	IpAddress,
   simCpsigCpsigPort	   INTEGER,
   simCpsigCaMib	      OBJECT IDENTIFIER
   }

simCpsigIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Unique index into the Cpsig table. "
 ::= { simCpsigEntry 1 }

simCpsigSuperCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "super_CAS_id "
 ::= { simCpsigEntry 2 }

simCpsigErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communication errors for this C(P)SIG)."
 ::= { simCpsigEntry 3 }

simCpsigChannels OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of channels for this C(P)SIG)."
 ::= { simCpsigEntry 4 }

simCpsigCpsigIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The IP Address of the C(P)SIG)."
 ::= { simCpsigEntry 5 }

simCpsigCpsigPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The TCP port number of the C(P)SIG)."
 ::= { simCpsigEntry 6 }
 
simCpsigCaMib OBJECT-TYPE
   SYNTAX OBJECT IDENTIFIER
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
" Pointer to a vendor proprietary extension to the C(P)SIG) MIB group."
 ::= { simCpsigEntry 7 }


-- ---------------------------------------------------------------------------------
-- C(P)SIG) Channel Table - Used for monitoring of C(P)SIG channels.
--

simCpsigCTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimCpsigCEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is used for monitoring of channels between (P)SIGs and C(P)SIGs."
 ::= { simCPSI 2 }

simCpsigCEntry OBJECT-TYPE
   SYNTAX SimCpsigCEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
" Information about a single table entry." 
   INDEX { simCpsigIndex, simCpsigChannelId }
 ::= { simCpsigCTable 1 }

SimCpsigCEntry ::= SEQUENCE {
   simCpsigChannelId	   INTEGER,
   simCpsigPsigIpAddress	IpAddress,
   simCpsigPsigPort      INTEGER,
   simCpsigCErrs	      Counter32,
   simCpsigCTstrms       Counter32,
   simCpsigCSstrms       Counter32
   }

simCpsigChannelId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"ChannelId identifies the C(P)SIG channel."
 ::= { simCpsigCEntry 1 }

simCpsigPsigIpAddress OBJECT-TYPE
   SYNTAX IpAddress
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"IP address of the host of the (P)SIG."
 ::= { simCpsigCEntry 2 }

simCpsigPsigPort OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"TCP Port number of the (P)SIG."
 ::= { simCpsigCEntry 3 }

simCpsigCErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communication errors on this channel."
 ::= { simCpsigCEntry 4 }

simCpsigCTstrms OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of transport streams on this channel."
 ::= { simCpsigCEntry 5 }

simCpsigCSstrms OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of service streams on this channel."
 ::= { simCpsigCEntry 6 }
 
-- ---------------------------------------------------------------------------------
-- C(P)SIG Stream Table - Used for monitoring of C(P)SIG) streams.
--

simCpsigStreamTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimCpsigStreamEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is used for monitoring of streams between Muxes and C(P)SIG)s."
 ::= { simCPSI 3 }

simCpsigStreamEntry OBJECT-TYPE
   SYNTAX SimCpsigStreamEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry."
   INDEX { simCpsigIndex, simCpsigChannelId, simCpsigStreamId }
 ::= { simCpsigStreamTable 1 }

SimCpsigStreamEntry ::= SEQUENCE {
   simCpsigStreamId         INTEGER,
   simCpsigStreamTStreamId    INTEGER,
   simCpsigStreamNid	      INTEGER,
   simCpsigStreamOnid	      INTEGER,
   simCpsigStreamMaxCompTime	INTEGER,
   simCpsigStreamTriggerEnable TriggerType,
   simCpsigStreamLastTrigger	TriggerType,
   simCpsigStreamLastEventId	INTEGER, 
   simCpsigStreamLastServiceId INTEGER,
   simCpsigStreamLastEsId	   INTEGER,
   simCpsigStreamLastEcmPid   INTEGER,
   simCpsigStreamErrs	      Counter32,
   simCpsigStreamBytes       Counter32
   }

simCpsigStreamId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This identifier uniquely identifies a C(P)SIG) stream"
 ::= { simCpsigStreamEntry 1 } 

simCpsigStreamTStreamId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This identifier uniquely identifies a C(P)SIG transport stream"
 ::= { simCpsigStreamEntry 2 }

simCpsigStreamNid OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This identifier uniquely identifies the network id associated with the stream"
 ::= { simCpsigStreamEntry 3 }

simCpsigStreamOnid OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"This identifier uniquely identifies the original network 
 id associated with the stream"
 ::= { simCpsigStreamEntry 4 }

simCpsigStreamMaxCompTime OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Max Computation time by the C(P)SIG."
 ::= { simCpsigStreamEntry 5 }

simCpsigStreamTriggerEnable OBJECT-TYPE
   SYNTAX TriggerType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Triggers enabled by the C(P)SIG."
 ::= { simCpsigStreamEntry 6 }

simCpsigStreamLastTrigger OBJECT-TYPE
   SYNTAX TriggerType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Last trigger processed by the C(P)SIG."
 ::= { simCpsigStreamEntry 7 }

simCpsigStreamLastEventId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Last event id processed by the C(P)SIG."
 ::= { simCpsigStreamEntry 8 }

simCpsigStreamLastServiceId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Last service id processed by the C(P)SIG."
 ::= { simCpsigStreamEntry 9 } 

simCpsigStreamLastEsId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Last elementary stream id processed by the C(P)SIG."
 ::= { simCpsigStreamEntry 10 } 

simCpsigStreamLastEcmPid OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Last ECM pid processed by the C(P)SIG."
 ::= { simCpsigStreamEntry 11 }

simCpsigStreamErrs OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of communication errors on this stream."
 ::= { simCpsigStreamEntry 12 }

simCpsigStreamBytes OBJECT-TYPE
   SYNTAX Counter32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The total number of bytes sent by this EMMG/PDG on this stream."
 ::= { simCpsigStreamEntry 13 }

-- ---------------------------------------------------------------------------------
-- (P)SIG Group - This Group is used for the synchronization and information
-- exchange between the PSI Generator and Custom PSI Generators and
-- between the SI Generator and Custom SI Generators.
--

simPsigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table advertises the (P)SIG configuration information. "
 ::= { simPSI 1 }

simPsigEntry OBJECT-TYPE
   SYNTAX SimPsigEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
INDEX { simPsigIndex }
 ::= { simPsigTable 1 }

SimPsigEntry ::= SEQUENCE {
   simPsigIndex         INTEGER,
   simPsigType          PsigType,
   simPsigTriggerSupport	TriggerType,
   simPsigNetworkId      INTEGER,
   simPsigONetworkId	   INTEGER,
   simPsigTransStreamId   INTEGER,
   simPsigTSServices	   OCTET STRING
   }

simPsigIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The unique index into the table."
 ::= { simPsigEntry 1 }

simPsigType OBJECT-TYPE
   SYNTAX PsigType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Psig type"
 ::= { simPsigEntry 2 }

simPsigTriggerSupport OBJECT-TYPE
   SYNTAX TriggerType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Identifies which trigger types the PSIG supports."
 ::= { simPsigEntry 3 }

simPsigNetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Network identifier. "
 ::= { simPsigEntry 4 }

simPsigONetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Original Network identifier. "
 ::= { simPsigEntry 5 } 

simPsigTransStreamId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Transport Stream identifier. "
 ::= { simPsigEntry 6 }

simPsigTSServices OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..511))
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"List of service identifies on the transport stream. "
 ::= { simPsigEntry 7 }

--
--

simPsigConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigConfigEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table configures the (P)SIG/(C)PSIG communication. "
 ::= { simPSI 2 }

simPsigConfigEntry OBJECT-TYPE
   SYNTAX SimPsigConfigEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. "
   INDEX { simPsigConfigCustCasId, simPsigConfigIndex , simPsigIndex}
 ::= { simPsigConfigTable 1 }

SimPsigConfigEntry ::= SEQUENCE {
   simPsigConfigIndex	      INTEGER,
   simPsigConfigAdminState    AdministrativeState,
   simPsigConfigCpsigType	   PsigType,
   simPsigConfigCustCasId	   SuperCasId,
   simPsigConfigMaxCompTime   INTEGER,
   simPsigConfigServiceId	   INTEGER,
   simPsigConfigTriggerEnable	TriggerType,
   simPsigConfigCADInsMode    CaDescInsMode,
   simPsigConfigEntryStatus   RowStatus
   }

simPsigConfigIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"The unique index into the table."
 ::= { simPsigConfigEntry 1 }
 
simPsigConfigAdminState OBJECT-TYPE
   SYNTAX AdministrativeState
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Used by an authorized manager to lock a conceptual row for exclusive
 write and create access."
 ::= { simPsigConfigEntry 2 }

simPsigConfigCpsigType OBJECT-TYPE
   SYNTAX PsigType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "C(P)SIG type."
 ::= { simPsigConfigEntry 3 }

simPsigConfigCustCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Custom CAS Identifier."
 ::= { simPsigConfigEntry 4 }

simPsigConfigMaxCompTime OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Maximum Computing Time. "
 ::= { simPsigConfigEntry 5 } 
 
simPsigConfigServiceId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Service identifier. "
 ::= { simPsigConfigEntry 6 }

simPsigConfigTriggerEnable OBJECT-TYPE
   SYNTAX TriggerType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Trigger types enabled. "
 ::= { simPsigConfigEntry 7 }

simPsigConfigCADInsMode OBJECT-TYPE
   SYNTAX CaDescInsMode
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Conditional Access Descriptor Insert mode. "
 ::= { simPsigConfigEntry 8 }

simPsigConfigEntryStatus OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Used for table row creation management."
 ::= { simPsigConfigEntry 9 }

--
--

simPsigEcmTrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigEcmTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table contains all the active ECM Triggers."
 ::= { simPSI 3 }

simPsigEcmTrEntry OBJECT-TYPE
   SYNTAX SimPsigEcmTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
   INDEX { simPsigEcmTrIndex }
 ::= { simPsigEcmTrTable 1 }

SimPsigEcmTrEntry ::= SEQUENCE {
   simPsigEcmTrIndex	      INTEGER,
   simPsigEcmTrNetworkId	   INTEGER,
   simPsigEcmTrONetworkId	   INTEGER,
   simPsigEcmTrTransStreamId	INTEGER,
   simPsigEcmTrServiceId	   INTEGER,
   simPsigEcmTrEsId         INTEGER,
   simPsigEcmTrType         ECMTriggerType,
   simPsigEcmTrSuCasId       SuperCasId,
   simPsigEcmTrEcmId	      FlowId,
   simPsigEcmTrEcmPid	      INTEGER, 
   simPsigEcmTrAccessCriteria	OCTET STRING
   }

simPsigEcmTrIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The trigger index."
 ::= { simPsigEcmTrEntry 1 } 

simPsigEcmTrNetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "The Network Identifier."
 ::= { simPsigEcmTrEntry 2 }
 
simPsigEcmTrONetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier."
 ::= { simPsigEcmTrEntry 3 }

simPsigEcmTrTransStreamId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier. "
 ::= { simPsigEcmTrEntry 4 }

simPsigEcmTrServiceId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Service Identifier. "
 ::= { simPsigEcmTrEntry 5 }

simPsigEcmTrEsId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Elementary Stream Identifier. "
 ::= { simPsigEcmTrEntry 6 }

simPsigEcmTrType OBJECT-TYPE
   SYNTAX ECMTriggerType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"ECM Trigger Type. "
 ::= { simPsigEcmTrEntry 7 }

simPsigEcmTrSuCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"ECM Client Identifier. "
 ::= { simPsigEcmTrEntry 8 }

simPsigEcmTrEcmId OBJECT-TYPE
   SYNTAX FlowId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"ECM Stream Identifier. "
 ::= { simPsigEcmTrEntry 9 } 
 
simPsigEcmTrEcmPid OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "ECM PID "
 ::= { simPsigEcmTrEntry 10 }

simPsigEcmTrAccessCriteria OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(0..127))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Access criteria. "
 ::= { simPsigEcmTrEntry 11 }

--
--

simPsigFlowTrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigFlowTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table contains all the active Flow Triggers."
 ::= { simPSI 4 }

simPsigFlowTrEntry OBJECT-TYPE
   SYNTAX SimPsigFlowTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
   INDEX { simPsigFlowTrIndex }
 ::= { simPsigFlowTrTable 1 }

SimPsigFlowTrEntry ::= SEQUENCE {
   simPsigFlowTrIndex	   INTEGER,
   simPsigFlowTrType	   FlowType,
   simPsigFlowTrSuCasId   SuperCasId,
   simPsigFlowTrFlowId    FlowId,
   simPsigFlowTrFlowPID   INTEGER
   }

simPsigFlowTrIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "The trigger index."
 ::= { simPsigFlowTrEntry 1 }

simPsigFlowTrType OBJECT-TYPE
   SYNTAX FlowType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Flow Type. "
 ::= { simPsigFlowTrEntry 2 }

simPsigFlowTrSuCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Flow Super CAS identifier. "
 ::= { simPsigFlowTrEntry 3 }

simPsigFlowTrFlowId OBJECT-TYPE
   SYNTAX FlowId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Flow Stream Identifier. "
 ::= { simPsigFlowTrEntry 4 } 

simPsigFlowTrFlowPID OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Flow PID "
 ::= { simPsigFlowTrEntry 5 }

--
--

simPsigEvntTrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigEvntTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table contains all the active EVNT Triggers."
 ::= { simPSI 5 }
 
simPsigEvntTrEntry OBJECT-TYPE
   SYNTAX SimPsigEvntTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
   INDEX { simPsigEvntTrIndex}
 ::= { simPsigEvntTrTable 1 }

SimPsigEvntTrEntry ::= SEQUENCE {
   simPsigEvntTrIndex	      INTEGER,
   simPsigEvntTrNetworkId	   INTEGER,
   simPsigEvntTrONetworkId    INTEGER,
   simPsigEvntTrTransStreamId	INTEGER,
   simPsigEvntTrServiceId	   INTEGER,
   simPsigEvntTrEventId      INTEGER,
   simPsigEvntTrStartTime	   OCTET STRING,
   simPsigEvntTrDuration	   OCTET STRING,
   simPsigEvntTrPrivateData   OCTET STRING
   }

simPsigEvntTrIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"The event trigger index."
 ::= { simPsigEvntTrEntry 1 } 

simPsigEvntTrNetworkId OBJECT-TYPE 
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "The Network Identifier."
 ::= { simPsigEvntTrEntry 2 } 

simPsigEvntTrONetworkId OBJECT-TYPE 
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier."
 ::= { simPsigEvntTrEntry 3 }

simPsigEvntTrTransStreamId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier. "
 ::= { simPsigEvntTrEntry 4 } 
 
simPsigEvntTrServiceId OBJECT-TYPE 
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
" Event trigger service identifier. "
 ::= { simPsigEvntTrEntry 5 } 
 
simPsigEvntTrEventId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Event Identifier. "
 ::= { simPsigEvntTrEntry 6 }

simPsigEvntTrStartTime OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE (0..4))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Event start time. "
 ::= { simPsigEvntTrEntry 7 }
 
simPsigEvntTrDuration OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE (0..2))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Event duration. "
 ::= { simPsigEvntTrEntry 8 }

simPsigEvntTrPrivateData OBJECT-TYPE
   SYNTAX OCTET STRING(SIZE (0..256))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"EVNT Channel Identifier. "
 ::= { simPsigEvntTrEntry 9 }

--
--
 
simPsigDescInsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigDescInsEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table contains all the information related to descriptor insertion."
 ::= { simPSI 6 }

simPsigDescInsEntry OBJECT-TYPE
   SYNTAX SimPsigDescInsEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
INDEX { simPsigDescInsIndex}
 ::= { simPsigDescInsTable 1 }

SimPsigDescInsEntry ::= SEQUENCE {
   simPsigDescInsIndex          INTEGER,
   simPsigDescInsAdminState      AdministrativeState,
   simPsigDescInsTrIndex	      INTEGER,
   simPsigDescInsTrType         TriggerType,
   simPsigDescInsLocationId      InsertLocation,
   simPsigDescInsNetworkId       INTEGER,
   simPsigDescInsONetworkId      INTEGER,
   simPsigDescInsTransStreamId    INTEGER,
   simPsigDescInsServiceId       INTEGER,
   simPsigDescInsElmStreamId	   INTEGER,
   simPsigDescInsBouquetId       INTEGER,
   simPsigDescInsEventId	      INTEGER,
   simPsigDescInsONetworkId2loop	INTEGER,
   simPsigDescInsNetworkIdOther   INTEGER, 
   simPsigDescInsTransStreamId2OrO INTEGER,
   simPsigDescInsDelayType       DelayType,
   simPsigDescInsDelay          OCTET STRING,
   simPsigDescPrivDataSpfier	   INTEGER,
   simPsigDescInsEntryStatus	   RowStatus
   }

simPsigDescInsIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The unique index into the table."
 ::= { simPsigDescInsEntry 1 }

simPsigDescInsAdminState OBJECT-TYPE
   SYNTAX AdministrativeState
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Used by an authorized manager to lock a conceptual row for exclusive
 write and create access."
 ::= { simPsigDescInsEntry 2 }

simPsigDescInsTrIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The unique index into the corresponding trigger table."
 ::= { simPsigDescInsEntry 3 }

simPsigDescInsTrType OBJECT-TYPE
   SYNTAX TriggerType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The type of the trigger that caused this descriptor insert."
 ::= { simPsigDescInsEntry 4 }

simPsigDescInsLocationId OBJECT-TYPE
   SYNTAX InsertLocation
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The type of target table for insertion."
 ::= { simPsigDescInsEntry 5 } 

simPsigDescInsNetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "The Network Identifier."
 ::= { simPsigDescInsEntry 6 } 

simPsigDescInsONetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier."
 ::= { simPsigDescInsEntry 7 }

simPsigDescInsTransStreamId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier. "
 ::= { simPsigDescInsEntry 8 }

simPsigDescInsServiceId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Service Identifier. "
 ::= { simPsigDescInsEntry 9 }

simPsigDescInsElmStreamId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Elementary stream identifier. "
 ::= { simPsigDescInsEntry 10 } 

simPsigDescInsBouquetId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Event trigger bouquet identifier. "
 ::= { simPsigDescInsEntry 11 }
 
simPsigDescInsEventId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "EVNT Identifier. "
 ::= { simPsigDescInsEntry 12 }

simPsigDescInsONetworkId2loop OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier second loop."
 ::= { simPsigDescInsEntry 13 }

simPsigDescInsNetworkIdOther OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Network Identifier other."
 ::= { simPsigDescInsEntry 14 }

simPsigDescInsTransStreamId2OrO OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier second loop or other. "
 ::= { simPsigDescInsEntry 15 }

simPsigDescInsDelayType OBJECT-TYPE
   SYNTAX DelayType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Delay type, immediate or synchronized. "
 ::= { simPsigDescInsEntry 16 }

simPsigDescInsDelay OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(0..1))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Insert delay"
 ::= { simPsigDescInsEntry 17 }

simPsigDescPrivDataSpfier OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Private data specifier"
 ::= { simPsigDescInsEntry 18 }

simPsigDescInsEntryStatus OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Other transport stream identifiers."
 ::= { simPsigDescInsEntry 19 }

--
--

simPsigDescInsDescTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigDescInsDescEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table contains all the descriptors to be inserted."
 ::= { simPSI 7 }
 
simPsigDescInsDescEntry OBJECT-TYPE
   SYNTAX SimPsigDescInsDescEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. "
INDEX { simPsigDescInsIndex, simPsigDescInsDescIndex }
 ::= { simPsigDescInsDescTable 1 }

SimPsigDescInsDescEntry ::= SEQUENCE {
   simPsigDescInsDescIndex       INTEGER,
   simPsigDescInsDescAdminState   AdministrativeState,
   simPsigDescInsDescriptor      OCTET STRING,
   simPsigDescInsDescriptorStatus	DescriptorStatus,
   simPsigDescInsDescEntryStatus	RowStatus
   }

simPsigDescInsDescIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The unique index into the table."
 ::= { simPsigDescInsDescEntry 1 }
 
simPsigDescInsDescAdminState OBJECT-TYPE
   SYNTAX AdministrativeState
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Used by an authorized manager to lock a conceptual row for exclusive
 write and create access."
 ::= { simPsigDescInsDescEntry 2 }

simPsigDescInsDescriptor OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(0..8191))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The descriptor to be inserted."
 ::= { simPsigDescInsDescEntry 3 }

simPsigDescInsDescriptorStatus OBJECT-TYPE
   SYNTAX DescriptorStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The insertion status of the descriptor."
 ::= { simPsigDescInsDescEntry 4 }

simPsigDescInsDescEntryStatus OBJECT-TYPE
   SYNTAX RowStatus
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Other transport stream identifiers."
 ::= { simPsigDescInsDescEntry 5 }

--
--

simPsigTblProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigTblProvEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table is the interface to obtaining all PSI/SI information."
 ::= { simPSI 8 }

simPsigTblProvEntry OBJECT-TYPE
   SYNTAX SimPsigTblProvEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
INDEX { simPsigTblProvIndex }
 ::= { simPsigTblProvTable 1 }

SimPsigTblProvEntry ::= SEQUENCE {
   simPsigTblProvIndex       INTEGER,
   simPsigTblProvTableId	   ProvTableId,
   simPsigTblNetworkId       INTEGER,
   simPsigTblONetworkId      INTEGER,
   simPsigTblTransStreamId    INTEGER,
   simPsigTblServiceId       INTEGER,
   simPsigTblBouquetId       INTEGER,
   simPsigTblEventId	      INTEGER,
   simPsigTblONetworkId2loop	INTEGER,
   simPsigTblNetworkIdOther   INTEGER, 
   simPsigTblTransStreamId2OrO INTEGER,
   simPsigTblSegmentNr       INTEGER,
   simPsigTblProvPart	      OCTET STRING,
   simPsigTblProvPartNumber   INTEGER
   }

simPsigTblProvIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The unique index into the table."
 ::= { simPsigTblProvEntry 1 }

simPsigTblProvTableId OBJECT-TYPE
   SYNTAX ProvTableId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"The table identifier of the table."
 ::= { simPsigTblProvEntry 2 }

simPsigTblNetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "The Network Identifier."
 ::= { simPsigTblProvEntry 3 } 

simPsigTblONetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier."
 ::= { simPsigTblProvEntry 4 }

simPsigTblTransStreamId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier. "
 ::= { simPsigTblProvEntry 5 }

simPsigTblServiceId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Service Identifier. "
 ::= { simPsigTblProvEntry 6 }

simPsigTblBouquetId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Event trigger bouquet identifier. "
 ::= { simPsigTblProvEntry 7 }
 
simPsigTblEventId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Event Identifier "
 ::= { simPsigTblProvEntry 8 }

simPsigTblONetworkId2loop OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier second loop."
 ::= { simPsigTblProvEntry 9 } 

simPsigTblNetworkIdOther OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Network Identifier other."
 ::= { simPsigTblProvEntry 10 }

simPsigTblTransStreamId2OrO OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier second loop or other. "
 ::= { simPsigTblProvEntry 11 }

simPsigTblSegmentNr OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Segment Number "
 ::= { simPsigTblProvEntry 12 }

simPsigTblProvPart OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8191))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Event Identifier "
 ::= { simPsigTblProvEntry 13 }
 
simPsigTblProvPartNumber OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Each table is subdivided into parts for SNMP transport if necessary.
 The part number identifies the table part of this entry. "
 ::= { simPsigTblProvEntry 14 }

--
--

simPsigPIDProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigPIDProvEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This is the PID provisioning table."
 ::= { simPSI 9 }

simPsigPIDProvEntry OBJECT-TYPE
   SYNTAX SimPsigPIDProvEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. "
INDEX { simPsigPIDProvSuCasId, simPsigPIDProvFlowId }
 ::= { simPsigPIDProvTable 1 }

SimPsigPIDProvEntry ::= SEQUENCE {
   simPsigPIDProvFlowType	FlowType,
   simPsigPIDProvSuCasId	SuperCasId,
   simPsigPIDProvFlowId   FlowId,
   simPsigPIDProvFlowPID	INTEGER
   }

simPsigPIDProvFlowType OBJECT-TYPE
   SYNTAX FlowType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flow Type. "
 ::= { simPsigPIDProvEntry 1 }

simPsigPIDProvSuCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Flow Super CAS identifier. "
 ::= { simPsigPIDProvEntry 2 }

simPsigPIDProvFlowId OBJECT-TYPE
   SYNTAX FlowId
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
"Flow Stream Identifier. "
 ::= { simPsigPIDProvEntry 3 } 

simPsigPIDProvFlowPID OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Flow PID "
 ::= { simPsigPIDProvEntry 4 }

--
--

simPsigPdTrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SimPsigPdTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"This table contains all the active Private Data Triggers."
 ::= { simPSI 10 }

simPsigPdTrEntry OBJECT-TYPE
   SYNTAX SimPsigPdTrEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
"Information about a single table entry. " 
INDEX { simPsigPdTrIndex }
 ::= { simPsigPdTrTable 1 }

SimPsigPdTrEntry ::= SEQUENCE {
   simPsigPdTrIndex         INTEGER,
   simPsigPdTrNetworkId      INTEGER,
   simPsigPdTrONetworkId	   INTEGER,
   simPsigPdTrTransStreamId   INTEGER,
   simPsigPdTrServiceId      INTEGER,
   simPsigPdTrEsId          INTEGER,
   simPsigPdTrType          ECMTriggerType,
   simPsigPdTrSuCasId	      SuperCasId,
   simPsigPdTrPdId          FlowId,
   simPsigPdTrPdPid         INTEGER,
   simPsigPdTrPdStreamType    INTEGER,
   simPsigPdTrPrivateData	   OCTET STRING 
   }
 

simPsigPdTrIndex OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "The trigger index."
 ::= { simPsigPdTrEntry 1 } 

simPsigPdTrNetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "The Network Identifier."
 ::= { simPsigPdTrEntry 2 } 

simPsigPdTrONetworkId OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"The Original Network Identifier."
 ::= { simPsigPdTrEntry 3 }

simPsigPdTrTransStreamId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Transport Stream Identifier. "
 ::= { simPsigPdTrEntry 4 }

simPsigPdTrServiceId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "Service Identifier. "
 ::= { simPsigPdTrEntry 5 }

simPsigPdTrEsId OBJECT-TYPE
   SYNTAX INTEGER(0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Elementary Stream Identifier. "
 ::= { simPsigPdTrEntry 6 }

simPsigPdTrType OBJECT-TYPE
   SYNTAX ECMTriggerType
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"ECM Trigger Type. "
 ::= { simPsigPdTrEntry 7 }

simPsigPdTrSuCasId OBJECT-TYPE
   SYNTAX SuperCasId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"ECM Client Identifier. "
 ::= { simPsigPdTrEntry 8 }

simPsigPdTrPdId OBJECT-TYPE
   SYNTAX FlowId
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"ECM Stream Identifier. "
 ::= { simPsigPdTrEntry 9 }
 
simPsigPdTrPdPid OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
      "ECM PID "
 ::= { simPsigPdTrEntry 10 }

simPsigPdTrPdStreamType OBJECT-TYPE
   SYNTAX INTEGER (0..255)
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Stream type of Private Data Stream"
 ::= { simPsigPdTrEntry 11 }

simPsigPdTrPrivateData OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE(0..127))
   MAX-ACCESS read-create
   STATUS current
   DESCRIPTION
"Private Data string. "
 ::= { simPsigPdTrEntry 12}

-- ---------------------------------------------------------------------------------
--
-- Conformance Information
--

simCompliances	OBJECT IDENTIFIER ::= { simMIBConformance 1 }
simGroups	OBJECT IDENTIFIER ::= { simMIBConformance 2 }

simEcmgCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
"The compliance statement for SNMP Entities which host or represent ECMGs"
MODULE -- this module
MANDATORY-GROUPS { simIdentGroup, simEcmgGroup}
 ::= { simCompliances 1}

simEmOrPdCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
"The compliance statement for SNMP Entities which host or
 represent EMMGs or PDGs" 
MODULE -- this module
MANDATORY-GROUPS { simIdentGroup, simEmOrPdGroup}
   GROUP simEmOrPdLapGGroup
   DESCRIPTION
"Allows for grouping of LAPs "
 ::= { simCompliances 2}

simCpsigCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
"The compliance statement for SNMP Entities which host or
 		  represent C(P)SIG)s" 
MODULE -- this module
MANDATORY-GROUPS { simIdentGroup, simCpsigGroup}
 ::= { simCompliances 3}

simPsigCompliance MODULE-COMPLIANCE
   STATUS current
   DESCRIPTION
"The compliance statement for SNMP Entities which host or
 represent (P)SIG)s" 
MODULE -- this module
MANDATORY-GROUPS { simIdentGroup, simPsigGroup}
 ::= { simCompliances 4}

simIdentGroup OBJECT-GROUP
   OBJECTS {
      simSofwareVersion,
      simMIBVersion,
      simMIBPrivateVersion,
      simAgentVersion
   }
   STATUS current
   DESCRIPTION
"A collection of objects providing software configuration infomation."
 ::= { simGroups 1 }

simEcmgGroup OBJECT-GROUP
   OBJECTS {
      simEcmgIndex,
      simEcmgIpAddress,
      simEcmgTcpPort,
      simEcmgSuCasId,
      simEcmgChannels,
      simEcmgCwPrs,
      simEcmgErrs,
      simEcmgTargetCpsig,
      simEcmgCaMib ,
      simEcmgChannelId,
      simEcmgCScsIpAddress,
      simEcmgCScsTcpPort,
      simEcmgCStreams,
      simEcmgCCwPrs,
      simEcmgCErrs,
      simEcmgStreamId,
      simEcmgEcmId,
      simEcmgSLastCp,
      simEcmgSCwPrs,
      simEcmgSErrs
   }
   STATUS current
   DESCRIPTION
" A collection of objects providing ECMG infomation."
 ::= { simGroups 2 }

simEmOrPdGroup OBJECT-GROUP
   OBJECTS {
      simEmOrPdIndex,
      simEmOrPdDataType,
      simEmOrPdClientId,
      simEmOrPdCommCapability,
      simEmOrPdErrs,
      simEmOrPdTargetCpsig ,
      simEmOrPdCaMib,
      simEmOrPdLapIndex,
      simEmOrPdLapAdminState,
      simEmOrPdLapCommType,
      simEmOrPdLapMuxIpAddress,
      simEmOrPdLapMuxPort,
      simEmOrPdLapStatus,
      simEmOrPdChannelId,
      simEmOrPdCommType,
      simEmOrPdCIpAddress,
      simEmOrPdCPort,
      simEmOrPdCErrs,
      simEmOrPdDataId,
      simEmOrPdSChannelId,
      simEmOrPdBwidth,
      simEmOrPdStreamId,
      simEmOrPdSErrs,
      simEmOrPdSBytes
   }
   STATUS current
   DESCRIPTION
" A collection of objects providing EMMG/PDG infomation."
 ::= { simGroups 3 }

simEmOrPdLapGGroup OBJECT-GROUP
   OBJECTS {
      simEmOrPdLapGroup,
      simEmOrPdLapGAdminState,
      simEmOrPdLapGStatus
   }
   STATUS current
   DESCRIPTION
" A collection of objects providing LAPG infomation."
 ::= { simGroups 4 }

simCpsigGroup OBJECT-GROUP
   OBJECTS {
      simCpsigIndex,
      simCpsigSuperCasId,
      simCpsigErrs,
      simCpsigChannels,
      simCpsigCpsigIpAddress,
      simCpsigCpsigPort,
      simCpsigCaMib,
      simCpsigChannelId,
      simCpsigPsigIpAddress,
      simCpsigPsigPort,
      simCpsigCErrs,
      simCpsigCTstrms,
      simCpsigCSstrms,
      simCpsigStreamTStreamId,
      simCpsigStreamNid,
      simCpsigStreamOnid,
      simCpsigStreamMaxCompTime,
      simCpsigStreamTriggerEnable,
      simCpsigStreamLastTrigger,
      simCpsigStreamLastEventId,
      simCpsigStreamLastServiceId,
      simCpsigStreamLastEsId,
      simCpsigStreamLastEcmPid,
      simCpsigStreamErrs,
      simCpsigStreamBytes
   }
   STATUS current
   DESCRIPTION
"A collection of objects providing C(P)SIG) infomation."
 ::= { simGroups 5 }


simPsigGroup OBJECT-GROUP
   OBJECTS {
      simPsigIndex,
      simPsigType,
      simPsigTriggerSupport,
      simPsigNetworkId,
      simPsigONetworkId,
      simPsigTransStreamId,
      simPsigTSServices,
      simPsigConfigAdminState,
      simPsigConfigCustCasId,
      simPsigConfigMaxCompTime,
      simPsigConfigServiceId,
      simPsigConfigTriggerEnable,
      simPsigConfigEntryStatus,
      simPsigConfigCpsigType,
      simPsigConfigCADInsMode,
      simPsigEcmTrNetworkId,
      simPsigEcmTrONetworkId,
      simPsigEcmTrTransStreamId,
      simPsigEcmTrServiceId,
      simPsigEcmTrEsId,
      simPsigEcmTrType,
      simPsigEcmTrSuCasId,
      simPsigEcmTrEcmId,
      simPsigEcmTrEcmPid,
      simPsigEcmTrAccessCriteria,
      simPsigEvntTrNetworkId,
      simPsigEvntTrONetworkId,
      simPsigEvntTrTransStreamId,
      simPsigEvntTrServiceId,
      simPsigEvntTrEventId,
      simPsigEvntTrStartTime,
      simPsigEvntTrDuration,
      simPsigEvntTrPrivateData,
      simPsigFlowTrIndex,
      simPsigFlowTrType,
      simPsigFlowTrSuCasId,
      simPsigFlowTrFlowId,
      simPsigFlowTrFlowPID,
      simPsigDescInsIndex,
      simPsigDescInsAdminState,
      simPsigDescInsTrIndex,
      simPsigDescInsTrType,
      simPsigDescInsLocationId,
      simPsigDescInsNetworkId,
      simPsigDescInsONetworkId,
      simPsigDescInsTransStreamId,
      simPsigDescInsServiceId,
      simPsigDescInsElmStreamId,
      simPsigDescInsBouquetId,
      simPsigDescInsEventId,
      simPsigDescInsNetworkIdOther,
      simPsigDescInsONetworkId2loop,
      simPsigDescInsTransStreamId2OrO,
      simPsigDescInsDelayType,
      simPsigDescInsDelay,
      simPsigDescPrivDataSpfier,
      simPsigDescInsEntryStatus,
      simPsigDescInsDescIndex,
      simPsigDescInsDescAdminState,
      simPsigDescInsDescriptor,
      simPsigDescInsDescriptorStatus,
      simPsigDescInsDescEntryStatus,
      simPsigTblProvIndex,
      simPsigTblProvTableId	   ,
      simPsigTblNetworkId,
      simPsigTblONetworkId   ,
      simPsigTblTransStreamId    ,
      simPsigTblServiceId ,
      simPsigTblBouquetId,
      simPsigTblEventId	,
      simPsigTblNetworkIdOther,
      simPsigTblONetworkId2loop,
      simPsigTblTransStreamId2OrO,
      simPsigTblSegmentNr,
      simPsigTblProvPart,
      simPsigTblProvPartNumber,
      simPsigPIDProvFlowType,
      simPsigPIDProvSuCasId,
      simPsigPIDProvFlowId,
      simPsigPIDProvFlowPID,
      simPsigPdTrNetworkId,
      simPsigPdTrONetworkId,
      simPsigPdTrTransStreamId,
      simPsigPdTrServiceId,
      simPsigPdTrEsId,
      simPsigPdTrType,
      simPsigPdTrSuCasId,
      simPsigPdTrPdId,
      simPsigPdTrPdPid,
      simPsigPdTrPdStreamType,
      simPsigPdTrPrivateData
   }
   STATUS current
   DESCRIPTION
"A collection of objects providing (P)SIG) infomation."
 ::= { simGroups 6 }
 
END