mibs/MIBS/arubaos/WLSX-MESH-MIB

284 lines
7.4 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
WLSX-MESH-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Integer32,
Unsigned32,
Counter32,
IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TDomain,
DisplayString,
PhysAddress,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr,
DateAndTime,
MacAddress,
TruthValue
FROM SNMPv2-TC
ArubaMeshRole,
ArubaEncryptionMethods,
ArubaPhyType
FROM ARUBA-TC
wlanAPMacAddress
FROM WLSX-WLAN-MIB
OBJECT-GROUP
FROM SNMPv2-CONF
wlsxEnterpriseMibModules
FROM ARUBA-MIB;
wlsxMeshMIB MODULE-IDENTITY
LAST-UPDATED "202008141745Z"
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
CONTACT-INFO
"Postal: 3333 Scott Blvd,
Santa Clara, CA 95054
E-mail: aruba-ext-eng-reg@hpe.com
Phone: 408 227 4500
Fax: 408 752 0626"
DESCRIPTION
"This MIB module defines MIB objects which provides
information about Mesh portal and topology
in the Aruba controller."
REVISION "202008141745Z"
DESCRIPTION
"The initial revision."
::= { wlsxEnterpriseMibModules 13 }
wlsxMeshInfoGroup OBJECT IDENTIFIER ::= { wlsxMeshMIB 1 }
wlsxMeshNodeGroup OBJECT IDENTIFIER ::= { wlsxMeshInfoGroup 1 }
wlsxMeshNodeTotal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Number of mesh nodes in the controller.
"
::= { wlsxMeshNodeGroup 1 }
wlsxMeshNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MeshEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table lists Mesh Node Info.
"
::= { wlsxMeshNodeGroup 2 }
wlsxMeshNodeEntry OBJECT-TYPE
SYNTAX MeshEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX {wlanAPMacAddress}
::= { wlsxMeshNodeTable 1 }
MeshEntry ::=
SEQUENCE {
wlsxMeshRole ArubaMeshRole,
wlsxMeshNodeParent MacAddress,
wlsxMeshNodeChildrenCount Unsigned32,
wlsxMeshNodeCluster DisplayString,
wlsxMeshNodeRfBand ArubaPhyType,
wlsxMeshNodePathCost Integer32,
wlsxMeshNodeNodeCost Integer32,
wlsxMeshNodeLinkCost Integer32,
wlsxMeshNodeHopCount Integer32,
wlsxMeshSNR Unsigned32,
wlsxMeshTxRate Unsigned32,
wlsxMeshRxRate Unsigned32,
wlsxMeshUplinkAge TimeTicks,
wlsxMeshNumRecoveryChildren Unsigned32,
wlsxMeshTopologyUpdateAge TimeTicks,
wlsxMeshIsRecovery TruthValue,
wlsxMeshIs11n TruthValue
}
wlsxMeshRole OBJECT-TYPE
SYNTAX ArubaMeshRole
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Mesh role
"
::= { wlsxMeshNodeEntry 1 }
wlsxMeshNodeParent OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Wired MAC address of mesh node's parent
"
::= { wlsxMeshNodeEntry 2 }
wlsxMeshNodeChildrenCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh node children count
"
::= { wlsxMeshNodeEntry 3 }
wlsxMeshNodeCluster OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh cluster name.
"
::= { wlsxMeshNodeEntry 4 }
wlsxMeshNodeRfBand OBJECT-TYPE
SYNTAX ArubaPhyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh node rf band
"
::= { wlsxMeshNodeEntry 5 }
wlsxMeshNodePathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh topology path cost
"
::= { wlsxMeshNodeEntry 6 }
wlsxMeshNodeNodeCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh topology node cost
"
::= { wlsxMeshNodeEntry 7 }
wlsxMeshNodeLinkCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh topology link cost
"
::= { wlsxMeshNodeEntry 8 }
wlsxMeshNodeHopCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Mesh topology hop count.
"
::= { wlsxMeshNodeEntry 9 }
wlsxMeshSNR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Signal-to-noise ratio mesh point sees its parent at.
"
::= { wlsxMeshNodeEntry 10 }
wlsxMeshTxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Transmit rate for mesh-uplink [mbps].
"
::= { wlsxMeshNodeEntry 11 }
wlsxMeshRxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Receive rate for mesh-uplink [mbps].
"
::= { wlsxMeshNodeEntry 12 }
wlsxMeshUplinkAge OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time elapsed since the mesh-uplink was formed.
"
::= { wlsxMeshNodeEntry 13 }
wlsxMeshNumRecoveryChildren OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of children in recovery this mesh node has.
"
::= { wlsxMeshNodeEntry 14 }
wlsxMeshTopologyUpdateAge OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time elapsed since the last mesh topology update was received from this node.
"
::= { wlsxMeshNodeEntry 15 }
wlsxMeshIsRecovery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
True if this mesh point is in recovery.
"
::= { wlsxMeshNodeEntry 16 }
wlsxMeshIs11n OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
True if this mesh node is 11n-enabled.
"
::= { wlsxMeshNodeEntry 17 }
END