mibs/MIBS/arubaos/WLSX-SNR-MIB

402 lines
11 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
--- ArubaOS 8.8.0.1_80393
-- vim: set ts=4 sw=4:
WLSX-SNR-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Integer32,
Counter32,
IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TDomain,
DisplayString,
PhysAddress,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr,
MacAddress,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
monPhyAddress,
monRadioNumber,
monitoredStaPhyAddress,
monitoredApBSSID
FROM WLSX-MON-MIB
wlsxEnterpriseMibModules
FROM ARUBA-MIB;
wlsxSNRMIB MODULE-IDENTITY
LAST-UPDATED "202008141745Z"
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
CONTACT-INFO
"Postal: 3333 Scott Blvd,
Santa Clara, CA 95054
E-mail: aruba-ext-eng-reg@hpe.com
Phone: 408 227 4500
Fax: 408 752 0626"
DESCRIPTION
"
This MIB module defines MIB objects which provide
information about the Wireless Management System (WMS) in the
Aruba controller.
"
REVISION "202008141745Z"
DESCRIPTION
"The initial revision."
::= { wlsxEnterpriseMibModules 7 }
wlsxSNRGroup OBJECT IDENTIFIER ::= { wlsxSNRMIB 1 }
-- AP SNR Table
wlsxAPSnrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxAPSnrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists SNR information about monitored APs.
"
::= { wlsxSNRGroup 1 }
wlsxAPSnrEntry OBJECT-TYPE
SYNTAX WlsxAPSnrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Management Entry"
INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
::= { wlsxAPSnrTable 1 }
WlsxAPSnrEntry ::=
SEQUENCE {
apSnrAverageSignalStrength Integer32,
apSnrSignalPkts Integer32,
apSnrHighestRxSignalStrength Integer32,
apSnrLowestRxSignalStrength Integer32,
apSnrSampleTime Integer32
}
apSnrAverageSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Total Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrEntry 1 }
apSnrSignalPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Number of Signal Packets observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrEntry 2 }
apSnrHighestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Highest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrEntry 3 }
apSnrLowestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Lowest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrEntry 4 }
apSnrSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Sample Time in which this data is collected.
"
::= { wlsxAPSnrEntry 5 }
-- Station SNR Table
wlsxStaSnrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxStaSnrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists SNR information about monitored stations.
"
::= { wlsxSNRGroup 2 }
wlsxStaSnrEntry OBJECT-TYPE
SYNTAX WlsxStaSnrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Management Entry"
INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
::= { wlsxStaSnrTable 1 }
WlsxStaSnrEntry ::=
SEQUENCE {
staSnrAverageSignalStrength Integer32,
staSnrSignalPkts Integer32,
staSnrHighestRxSignalStrength Integer32,
staSnrLowestRxSignalStrength Integer32,
staSnrSampleTime Integer32
}
staSnrAverageSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Total Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrEntry 1 }
staSnrSignalPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Number of Signal Packets observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrEntry 2 }
staSnrHighestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Highest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrEntry 3 }
staSnrLowestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Lowest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrEntry 4 }
staSnrSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Sample Time in which this data is collected.
"
::= { wlsxStaSnrEntry 5 }
-- AP SNR Table Ordered by the BSSID
wlsxAPSnrBSSIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxAPSnrBSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table SNR information about monitored APs.
"
::= { wlsxSNRGroup 3 }
wlsxAPSnrBSSIDEntry OBJECT-TYPE
SYNTAX WlsxAPSnrBSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Management Entry"
INDEX {monitoredApBSSID, monPhyAddress, monRadioNumber}
::= { wlsxAPSnrBSSIDTable 1 }
WlsxAPSnrBSSIDEntry ::=
SEQUENCE {
apSnrBSSIDAverageSignalStrength Integer32,
apSnrBSSIDSignalPkts Integer32,
apSnrBSSIDHighestRxSignalStrength Integer32,
apSnrBSSIDLowestRxSignalStrength Integer32,
apSnrBSSIDSampleTime Integer32
}
apSnrBSSIDAverageSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Total Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrBSSIDEntry 1 }
apSnrBSSIDSignalPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Number of Signal Packets observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrBSSIDEntry 2 }
apSnrBSSIDHighestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Highest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrBSSIDEntry 3 }
apSnrBSSIDLowestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Lowest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxAPSnrBSSIDEntry 4 }
apSnrBSSIDSampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Sample Time in which this data is collected.
"
::= { wlsxAPSnrBSSIDEntry 5 }
-- Station SNR Station Phy Table
wlsxStaSnrPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxStaSnrPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists SNR information about monitored stations.
"
::= { wlsxSNRGroup 4 }
wlsxStaSnrPhyEntry OBJECT-TYPE
SYNTAX WlsxStaSnrPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Management Entry"
INDEX {monitoredStaPhyAddress, monPhyAddress, monRadioNumber}
::= { wlsxStaSnrPhyTable 1 }
WlsxStaSnrPhyEntry ::=
SEQUENCE {
staSnrPhyAverageSignalStrength Integer32,
staSnrPhySignalPkts Integer32,
staSnrPhyHighestRxSignalStrength Integer32,
staSnrPhyLowestRxSignalStrength Integer32,
staSnrPhySampleTime Integer32
}
staSnrPhyAverageSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Total Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrPhyEntry 1 }
staSnrPhySignalPkts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Number of Signal Packets observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrPhyEntry 2 }
staSnrPhyHighestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Highest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrPhyEntry 3 }
staSnrPhyLowestRxSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Lowest Signal Strength observed by the Monitoring station
during this sample time.
"
::= { wlsxStaSnrPhyEntry 4 }
staSnrPhySampleTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Sample Time in which this data is collected.
"
::= { wlsxStaSnrPhyEntry 5 }
END