david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/arubaos/WLSX-SWITCH-MIB

2515 lines
66 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
WLSX-SWITCH-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION FROM SNMPv2-TC
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Integer32,
Counter32,
IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TDomain,
DisplayString,
PhysAddress,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr,
MacAddress,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
wlsxEnterpriseMibModules
FROM ARUBA-MIB;
wlsxSwitchMIB MODULE-IDENTITY
LAST-UPDATED "202008141745Z"
ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
CONTACT-INFO
"Postal: 3333 Scott Blvd,
Santa Clara, CA 95054
E-mail: aruba-ext-eng-reg@hpe.com
Phone: 408 227 4500
Fax: 408 752 0626"
DESCRIPTION
"This MIB module defines MIB objects which provide
System level information about the Aruba switches."
REVISION "202008141745Z"
DESCRIPTION
"The initial revision."
::= { wlsxEnterpriseMibModules 1 }
wlsxSystemXGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 1 }
wlsxUserInfoGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 2 }
wlsxAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 3 }
wlsxInstantAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxSwitchMIB 5 }
wlsxSwitchTraps OBJECT IDENTIFIER ::= { wlsxSwitchMIB 100 }
-- wlsxSystemXGroup contains objects to describe a switch.
wlsxHostname OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the switch."
::= { wlsxSystemXGroup 1 }
wlsxModelName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Model Name of the switch."
::= { wlsxSystemXGroup 2 }
wlsxSwitchIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch IP as configured by the user. This IP address uniquely
identifies the switch."
::= { wlsxSystemXGroup 3 }
wlsxSwitchRole OBJECT-TYPE
SYNTAX INTEGER {
master(1),
local(2),
standbymaster(3),
branch(4),
md(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Role of this switch in the Switch Domain."
::= { wlsxSystemXGroup 4 }
wlsxSwitchMasterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Master IP of the switch
"
::= { wlsxSystemXGroup 5 }
-- Switch List Table contains all the switches in the domain. This table is
-- valid only when queried from the master switch.
wlsxSwitchListTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table will list all the switches in the Switch Domain.
It will be populated only on the master switch. Local switches
return empty table.
"
::= { wlsxSystemXGroup 6 }
wlsxSwitchListEntry OBJECT-TYPE
SYNTAX MxSwitchListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Switch List Entry"
INDEX { switchListSwitchIPAddress}
::= { wlsxSwitchListTable 1 }
MxSwitchListEntry ::=
SEQUENCE {
switchListSwitchIPAddress IpAddress,
switchListSwitchRole INTEGER
}
switchListSwitchIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
IP Address of the switch.
"
::= { wlsxSwitchListEntry 1 }
switchListSwitchRole OBJECT-TYPE
SYNTAX INTEGER {
master(1),
local(2),
standbymaster(3),
branch(4),
md(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Role of the Switch.
"
::= { wlsxSwitchListEntry 2 }
wlsxSwitchLicenseCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of licenses installed on the switch
"
::= { wlsxSystemXGroup 7 }
-- The license table lists all valid licenses installed on the switch
wlsxSwitchLicenseTable OBJECT-TYPE
SYNTAX SEQUENCE OF LicenseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all licenses installed on the switch.
"
::= { wlsxSystemXGroup 8 }
wlsxLicenseEntry OBJECT-TYPE
SYNTAX LicenseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"License Entry"
INDEX { licenseIndex }
::= { wlsxSwitchLicenseTable 1 }
LicenseEntry ::=
SEQUENCE {
licenseIndex Integer32,
licenseKey DisplayString,
licenseInstalled DisplayString,
licenseExpires DisplayString,
licenseFlags DisplayString,
licenseService DisplayString
}
licenseIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
License ID number
"
::= { wlsxLicenseEntry 1 }
licenseKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
License Key
"
::= { wlsxLicenseEntry 2 }
licenseInstalled OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
License installation time
"
::= { wlsxLicenseEntry 3 }
licenseExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
License expiry time
"
::= { wlsxLicenseEntry 4 }
licenseFlags OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
License flags; E - enabled; A - auto-generated;
R - reboot required to activate
"
::= { wlsxLicenseEntry 5 }
licenseService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The service enabled by this license.
"
::= { wlsxLicenseEntry 6 }
-- Table lists all the processors and there corresponding Load.
wlsxSysXProcessorTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxSysXProcessorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The table of processors contained by the switch.
"
::= { wlsxSystemXGroup 9 }
wlsxSysXProcessorEntry OBJECT-TYPE
SYNTAX WlsxSysXProcessorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one processor contained by the switch.
"
INDEX { sysXProcessorID}
::= { wlsxSysXProcessorTable 1 }
WlsxSysXProcessorEntry ::=
SEQUENCE {
sysXProcessorID Integer32,
sysXProcessorDescr DisplayString,
sysXProcessorLoad Integer32
}
sysXProcessorID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Processor Index.
"
::= { wlsxSysXProcessorEntry 1 }
sysXProcessorDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
description of the processor.
"
::= { wlsxSysXProcessorEntry 2 }
sysXProcessorLoad OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The average, over the last minute, of the percentage of
time that this processor was not idle.
"
::= { wlsxSysXProcessorEntry 3 }
-- Table contains all the storage devices in the switch and there
-- utilization numbers.
wlsxSysXStorageTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxSysXStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The table of Storage-devices contained by the switch.
"
::= { wlsxSystemXGroup 10 }
wlsxSysXStorageEntry OBJECT-TYPE
SYNTAX WlsxSysXStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one long-term storage device contained by the
switch.
"
INDEX { sysXStorageIndex }
::= { wlsxSysXStorageTable 1 }
WlsxSysXStorageEntry ::=
SEQUENCE {
sysXStorageIndex Integer32,
sysXStorageType INTEGER,
sysXStorageSize Integer32,
sysXStorageUsed Integer32,
sysXStorageName DisplayString
}
sysXStorageIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
"
::= { wlsxSysXStorageEntry 1 }
sysXStorageType OBJECT-TYPE
SYNTAX INTEGER {
ram(1),
flashMemory(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
"
::= { wlsxSysXStorageEntry 2 }
sysXStorageSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
size of the storage filesystem in MB.
"
::= { wlsxSysXStorageEntry 3 }
sysXStorageUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
size of the storage filesystem in MB.
"
::= { wlsxSysXStorageEntry 4 }
sysXStorageName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
name of the storage filesystem.
"
::= { wlsxSysXStorageEntry 5 }
-- This table describes the memory utilization of the switch
wlsxSysXMemoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxSysXMemoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The memory status of the switch
"
::= { wlsxSystemXGroup 11 }
wlsxSysXMemoryEntry OBJECT-TYPE
SYNTAX WlsxSysXMemoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one memory region on the switch. Currently,
only the CP region is monitored.
"
INDEX { sysXMemoryIndex }
::= { wlsxSysXMemoryTable 1 }
WlsxSysXMemoryEntry ::=
SEQUENCE {
sysXMemoryIndex Integer32,
sysXMemorySize Integer32,
sysXMemoryUsed Integer32,
sysXMemoryFree Integer32
}
sysXMemoryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
"
::= { wlsxSysXMemoryEntry 1 }
sysXMemorySize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total memory in KB.
"
::= { wlsxSysXMemoryEntry 2 }
sysXMemoryUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Used memory in KB.
"
::= { wlsxSysXMemoryEntry 3 }
sysXMemoryFree OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Free memory in KB.
"
::= { wlsxSysXMemoryEntry 4 }
wlsxSwitchLicenseSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The license serial number of the switch
"
::= { wlsxSystemXGroup 12 }
wlsxSwitchIpv6 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch IPv6 as configured by the user. This IPv6 address uniquely
identifies the switch."
::= { wlsxSystemXGroup 13 }
wlsxSwitchMasterIpv6 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..45))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Master IPv6 address of the switch
"
::= { wlsxSystemXGroup 14 }
-- wlsxUserInfoGroup contains information about the users connected to the switch.
wlsxSwitchUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists all the users (both wired and wireless) currently
connected to the switch. Users are identified by their IP address.
"
::= { wlsxUserInfoGroup 1 }
wlsxSwitchUserEntry OBJECT-TYPE
SYNTAX MxSwitchUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Entry"
INDEX { userIpAddress}
::= { wlsxSwitchUserTable 1 }
MxSwitchUserEntry ::=
SEQUENCE {
userIpAddress IpAddress,
userPhyAddress MacAddress,
userName DisplayString,
userRole DisplayString,
userUpTime TimeTicks,
userAuthenticationMethod INTEGER,
userLocation DisplayString,
userServerName DisplayString,
userConnectedVlan Integer32,
userConnectedSlot Integer32,
userConnectedPort Integer32,
userBWContractName DisplayString,
userBWContractUsage INTEGER,
userConnectedModule INTEGER
}
userIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
IP Address from which the user connected to the switch.
"
::= { wlsxSwitchUserEntry 1 }
userPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Physical Address of the station from which the user connected to
the switch.
"
::= { wlsxSwitchUserEntry 2 }
userName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the User.
"
::= { wlsxSwitchUserEntry 3 }
userRole OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Role configured for this user.
"
::= { wlsxSwitchUserEntry 4 }
userUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time since the user is connected to the switch.
"
::= { wlsxSwitchUserEntry 5 }
userAuthenticationMethod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
other(2),
web(3),
dot1x(4),
vpn(5),
mac(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Authentication mechanism used by the user to connect to the switch.
"
::= { wlsxSwitchUserEntry 6 }
userLocation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Location of the access point (in Building.Floor.... format), which
the user used to connect to the switch.
"
::= { wlsxSwitchUserEntry 7 }
userServerName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the Back-end authentication server, used to authenticate
the user.
"
::= { wlsxSwitchUserEntry 8 }
userConnectedVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Vlan on which the user is connected to the switch.
"
::= { wlsxSwitchUserEntry 9 }
userConnectedSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Slot on switch, where the user connection terminates.
"
::= { wlsxSwitchUserEntry 10 }
userConnectedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Port on switch, where the user connection terminates.
"
::= { wlsxSwitchUserEntry 11 }
userBWContractName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the Bandwidth Contract applied to this user.
"
::= { wlsxSwitchUserEntry 12 }
userBWContractUsage OBJECT-TYPE
SYNTAX INTEGER {
user(1),
shared(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates how the Bandwidth Contract is used.
"
::= { wlsxSwitchUserEntry 13 }
userConnectedModule OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The module to which the user is connected, if wired.
"
::= { wlsxSwitchUserEntry 14 }
-- StationMgmt Table
--Station Management Table contains all the station associated with this AP.
wlsxSwitchStationMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchStationMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists all the wireless stations associated with the
Access points connected to this switch.
"
::= { wlsxUserInfoGroup 2 }
wlsxSwitchStationMgmtEntry OBJECT-TYPE
SYNTAX MxSwitchStationMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Management Entry"
INDEX {staPhyAddress, staAccessPointBSSID}
::= { wlsxSwitchStationMgmtTable 1 }
MxSwitchStationMgmtEntry ::=
SEQUENCE {
staPhyAddress MacAddress,
staAccessPointBSSID MacAddress,
staUserName DisplayString,
staUserRole DisplayString,
staAssociationID Unsigned32,
staAccessPointESSID DisplayString,
staSignalToNoiseRatio Integer32,
staTransmitRate INTEGER,
staReceiveRate INTEGER
}
staPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Physical Address of the Station.
"
::= { wlsxSwitchStationMgmtEntry 1 }
staAccessPointBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
BSSID of the Access point through which the station is connected
to the switch
"
::= { wlsxSwitchStationMgmtEntry 2 }
staUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the User connecting from this station.
"
::= { wlsxSwitchStationMgmtEntry 3 }
staUserRole OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
User Role.
"
::= { wlsxSwitchStationMgmtEntry 4 }
staAssociationID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
AID with which the Station is associated with this system.
"
::= { wlsxSwitchStationMgmtEntry 5 }
staAccessPointESSID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ESSID of the Access point
"
::= { wlsxSwitchStationMgmtEntry 6 }
staSignalToNoiseRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNR for the BSSID.
"
::= { wlsxSwitchStationMgmtEntry 7 }
staTransmitRate OBJECT-TYPE
SYNTAX INTEGER{
rate1Mbps(1),
rate2Mbps(2),
rate5point5Mbps(3),
rate6Mbps(4),
rate9Mbps(5),
rate11Mbps(6),
rate12Mbps(7),
rate18Mbps(8),
rate24Mbps(9),
rate36Mbps(10),
rate48Mbps(11),
rate54Mbps(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates Transmit rate of the channel
"
::= { wlsxSwitchStationMgmtEntry 8 }
staReceiveRate OBJECT-TYPE
SYNTAX INTEGER{
rate1Mbps(1),
rate2Mbps(2),
rate5point5Mbps(3),
rate6Mbps(4),
rate9Mbps(5),
rate11Mbps(6),
rate12Mbps(7),
rate18Mbps(8),
rate24Mbps(9),
rate36Mbps(10),
rate48Mbps(11),
rate54Mbps(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates Receive rate of the channel
"
::= { wlsxSwitchStationMgmtEntry 9 }
-- StationStats Table
--Station Statistics Table contains a summary of statistics collected by the
--switch. The stats are indexed by Station Mac and AP BSSID it is associated
--to.
wlsxSwitchStationStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchStationStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists the statistics of all the wireless stations
associated with the Access points connected to this switch.
"
::= { wlsxUserInfoGroup 3 }
wlsxSwitchStationStatsEntry OBJECT-TYPE
SYNTAX MxSwitchStationStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Statistics Entry"
INDEX {staPhyAddress, staAccessPointBSSID}
::= { wlsxSwitchStationStatsTable 1 }
MxSwitchStationStatsEntry ::=
SEQUENCE {
staTxPackets Counter32,
staTxBytes Counter32,
staRxPackets Counter32,
staRxBytes Counter32,
staBwRate Integer32,
staFrameRetryRate Integer32,
staFrameLowSpeedRate Integer32,
staFrameNonUnicastRate Integer32,
staFrameFragmentationRate Integer32,
staFrameReceiveErrorRate Integer32
}
staTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Packets Transmitted by the station.
"
::= { wlsxSwitchStationStatsEntry 1 }
staTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Bytes Transmitted by the station.
"
::= { wlsxSwitchStationStatsEntry 2 }
staRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Packets Received by the Station
"
::= { wlsxSwitchStationStatsEntry 3 }
staRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Bytes Received by the station.
"
::= { wlsxSwitchStationStatsEntry 4 }
staBwRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Bandwidth Rate in Kbps of the station.
"
::= { wlsxSwitchStationStatsEntry 5 }
staFrameRetryRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Station Frame Retry Rate.
"
::= { wlsxSwitchStationStatsEntry 6 }
staFrameLowSpeedRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Station Frame Low Speed Rate.
"
::= { wlsxSwitchStationStatsEntry 7 }
staFrameNonUnicastRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Station Frame Non Unicast Packet Rate.
"
::= { wlsxSwitchStationStatsEntry 8 }
staFrameFragmentationRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Station Frame Fragmentation Rate.
"
::= { wlsxSwitchStationStatsEntry 9 }
staFrameReceiveErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Station Frame Receive Error Rate.
"
::= { wlsxSwitchStationStatsEntry 10 }
-- wlsxAccessPointInfoGroup contains a Local Access Point Information Table.
-- which lists all the AP's connected to this switch, a Global AP Info Table
-- which lists all the AP's in the Domain. The Global table is valid only
-- on the Master switch. The Group also contains two scalar objects which
-- indicate the total number of AP's and the total number of Clients connected.
wlsxSwitchTotalNumAccessPoints OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Number of Access Points Connected to this switch.
"
::= { wlsxAccessPointInfoGroup 1 }
wlsxSwitchTotalNumStationsAssociated OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Number of Stations Associated to this switch.
"
::= { wlsxAccessPointInfoGroup 2 }
-- Local Access Point Table.
wlsxSwitchAccessPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists all the Access Points Connected to this switch.
"
::= { wlsxAccessPointInfoGroup 3 }
wlsxSwitchAccessPointEntry OBJECT-TYPE
SYNTAX MxSwitchAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Station Management Entry"
INDEX {apBSSID}
::= { wlsxSwitchAccessPointTable 1 }
MxSwitchAccessPointEntry ::=
SEQUENCE {
apBSSID MacAddress,
apESSID DisplayString,
apSlot Unsigned32,
apPort Unsigned32,
apIpAddress IpAddress,
apPhyType INTEGER,
apType INTEGER,
apCurrentChannel INTEGER,
apLocation DisplayString,
apTotalTime TimeTicks,
apInactiveTime TimeTicks,
apLoadBalancing TruthValue,
apChannelNoise Integer32,
apSignalToNoiseRatio Integer32,
apTransmitRate INTEGER,
apReceiveRate INTEGER
}
apBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Physical Address of the Access Point.
"
::= { wlsxSwitchAccessPointEntry 1 }
apESSID OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
ESSID of the Access Point
"
::= { wlsxSwitchAccessPointEntry 2 }
apSlot OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Slot to which the Access Point is connected.
"
::= { wlsxSwitchAccessPointEntry 3 }
apPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Port to which the Access Point is connected.
"
::= { wlsxSwitchAccessPointEntry 4 }
apIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Address of the Access Point.
"
::= { wlsxSwitchAccessPointEntry 5 }
apPhyType OBJECT-TYPE
SYNTAX INTEGER{
dot11a(1),
dot11b(2),
dot11g(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Physical Layer Protocol support of the AP.
"
::= { wlsxSwitchAccessPointEntry 6 }
apType OBJECT-TYPE
SYNTAX INTEGER{
ap(1),
am(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates whether the Access point is an Air Monitor or regular AP.
"
::= { wlsxSwitchAccessPointEntry 7 }
apCurrentChannel OBJECT-TYPE
SYNTAX INTEGER(1..165)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Current Operating frequency channel.
"
::= { wlsxSwitchAccessPointEntry 8 }
apLocation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Location of the AP defined in Building.Floor.... mode.
"
::= { wlsxSwitchAccessPointEntry 9 }
apTotalTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time since the Ap is connected to the switch
"
::= { wlsxSwitchAccessPointEntry 10 }
apInactiveTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time since the Ap has been inactive
"
::= { wlsxSwitchAccessPointEntry 11 }
apLoadBalancing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates whether Load balancing is enabled or not.
"
::= { wlsxSwitchAccessPointEntry 12 }
apChannelNoise OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates the noise on the channel
"
::= { wlsxSwitchAccessPointEntry 13 }
apSignalToNoiseRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
SNR for the BSSID.
"
::= { wlsxSwitchAccessPointEntry 14 }
apTransmitRate OBJECT-TYPE
SYNTAX INTEGER{
rate1Mbps(1),
rate2Mbps(2),
rate5point5Mbps(3),
rate6Mbps(4),
rate9Mbps(5),
rate11Mbps(6),
rate12Mbps(7),
rate18Mbps(8),
rate24Mbps(9),
rate36Mbps(10),
rate48Mbps(11),
rate54Mbps(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates Transmit rate of the channel
"
::= { wlsxSwitchAccessPointEntry 15 }
apReceiveRate OBJECT-TYPE
SYNTAX INTEGER{
rate1Mbps(1),
rate2Mbps(2),
rate5point5Mbps(3),
rate6Mbps(4),
rate9Mbps(5),
rate11Mbps(6),
rate12Mbps(7),
rate18Mbps(8),
rate24Mbps(9),
rate36Mbps(10),
rate48Mbps(11),
rate54Mbps(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates Receive rate of the channel
"
::= { wlsxSwitchAccessPointEntry 16 }
--Global AP Table
wlsxSwitchGlobalAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchGlobalAPEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"
This Table lists all the Access Points Connected in the
Switch Domain. This table is valid only on a
Master switch. On a Local switch, the table is empty.
"
::= { wlsxAccessPointInfoGroup 4 }
wlsxSwitchGlobalAPEntry OBJECT-TYPE
SYNTAX MxSwitchGlobalAPEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Station Management Entry"
INDEX {globalAPLocation, globalAPAddress}
::= { wlsxSwitchGlobalAPTable 1 }
MxSwitchGlobalAPEntry ::=
SEQUENCE {
globalAPLocation DisplayString,
globalAPAddress IpAddress,
globalAPLocalSwitch IpAddress,
globalAPdot11aPhyAddr MacAddress,
globalAPdot11bPhyAddr MacAddress,
globalAPState INTEGER,
globalAPdot11gPhyAddr MacAddress
}
globalAPLocation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"
Physical Location of the AP, defined in Building.Floor.Location
format.
"
::= { wlsxSwitchGlobalAPEntry 1 }
globalAPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"
Address of the Access Point.
"
::= { wlsxSwitchGlobalAPEntry 2 }
globalAPLocalSwitch OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
IP Address of the Local Switch this Access Point is connected to.
"
::= { wlsxSwitchGlobalAPEntry 3 }
globalAPdot11aPhyAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
Physical Mac address of the module supporting dot11a in the
Access Point. AP can have support for both dot11a and dot11b
physical layer.
"
::= { wlsxSwitchGlobalAPEntry 4 }
globalAPdot11bPhyAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
Physical Mac address of the module supporting dot11b in the
Access Point. AP can have support for both dot11a and dot11b
physical layer.
"
::= { wlsxSwitchGlobalAPEntry 5 }
globalAPState OBJECT-TYPE
SYNTAX INTEGER(1..7)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
State of the AP.
1 -- AP is UP.
2 -- AP is DOWN.
3-7 -- Values are deprecated.
"
::= { wlsxSwitchGlobalAPEntry 6 }
globalAPdot11gPhyAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
Physical Mac address of the module supporting dot11g in the
Access Point. AP can have support for both a,b,g
physical layer.
"
::= { wlsxSwitchGlobalAPEntry 7 }
-- Local AP Stats.
wlsxSwitchAccessPointStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MxSwitchAccessPointStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists the statistics of all the Access Points Connected
to this switch.
"
::= { wlsxAccessPointInfoGroup 5 }
wlsxSwitchAccessPointStatsEntry OBJECT-TYPE
SYNTAX MxSwitchAccessPointStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Ap Stats Entry.
"
INDEX {apBSSID}
::= { wlsxSwitchAccessPointStatsTable 1 }
MxSwitchAccessPointStatsEntry ::=
SEQUENCE {
apStatsChannel INTEGER,
apChannelBwRate Integer32,
apChannelFrameRetryRate Integer32,
apChannelFrameLowSpeedRate Integer32,
apChannelFrameNonUnicastRate Integer32,
apChannelFrameFragmentationRate Integer32,
apChannelFrameReceiveErrorRate Integer32,
apBSSTxPackets Counter32,
apBSSTxBytes Counter32,
apBSSRxPackets Counter32,
apBSSRxBytes Counter32,
apBSSBwRate Integer32,
apBSSFrameRetryRate Integer32,
apBSSFrameLowSpeedRate Integer32,
apBSSFrameNonUnicastRate Integer32,
apBSSFrameFragmentationRate Integer32,
apBSSFrameReceiveErrorRate Integer32
}
apStatsChannel OBJECT-TYPE
SYNTAX INTEGER(1..165)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Channel on which the ap is operating.
"
::= { wlsxSwitchAccessPointStatsEntry 1 }
apChannelBwRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Bandwidth Rate in Kbps of the apChannel.
"
::= { wlsxSwitchAccessPointStatsEntry 2 }
apChannelFrameRetryRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Ap Channel Frame Retry Rate.
"
::= { wlsxSwitchAccessPointStatsEntry 3 }
apChannelFrameLowSpeedRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Ap Channel Frame Low Speed Rate.
"
::= { wlsxSwitchAccessPointStatsEntry 4 }
apChannelFrameNonUnicastRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Ap Channel Frame Non Unicast Packet Rate.
"
::= {wlsxSwitchAccessPointStatsEntry 5 }
apChannelFrameFragmentationRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Ap Channel Frame Fragmentation Rate.
"
::= { wlsxSwitchAccessPointStatsEntry 6 }
apChannelFrameReceiveErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Ap Channel Frame Receive Error Rate.
"
::= { wlsxSwitchAccessPointStatsEntry 7 }
apBSSTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Packets Transmitted by the ap on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 8 }
apBSSTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Bytes Transmitted by the ap on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 9 }
apBSSRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Packets Received by the ap on this BSSID
"
::= { wlsxSwitchAccessPointStatsEntry 10 }
apBSSRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Bytes Received by the ap on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 11 }
apBSSBwRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Bandwidth Rate in Kbps of the ap on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 12 }
apBSSFrameRetryRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Frame Retry Rate on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 13 }
apBSSFrameLowSpeedRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Frame Low Speed Rate on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 14 }
apBSSFrameNonUnicastRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Frame Non Unicast Packet Rate on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 15 }
apBSSFrameFragmentationRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Frame Fragmentation Rate on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 16 }
apBSSFrameReceiveErrorRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Frame Receive Error Rate on this BSSID.
"
::= { wlsxSwitchAccessPointStatsEntry 17 }
-- New wlsxInstantAccessPointInfoGroup contains the information related to IAPs.
-- This table is valid only, when queried from the controller.
wlsxIapTotalNumBranches OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of branches in IAP"
::= { wlsxInstantAccessPointInfoGroup 1 }
wlsxIapTotalNumBranchesUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of branches with status Up."
::= { wlsxInstantAccessPointInfoGroup 2 }
wlsxIapTotalNumBranchesDown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of branches with status Down"
::= { wlsxInstantAccessPointInfoGroup 3 }
-- IAP Table
wlsxIapBranchTable OBJECT-TYPE
SYNTAX SEQUENCE OF IapBranchListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table lists all the information related to IAP branches.
"
::= { wlsxInstantAccessPointInfoGroup 4 }
wlsxIapBranchEntry OBJECT-TYPE
SYNTAX IapBranchListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IAP branch entry"
INDEX {iapBranchKey}
::= { wlsxIapBranchTable 1 }
IapBranchListEntry ::=
SEQUENCE {
iapBranchKey DisplayString,
iapBranchName DisplayString,
iapBranchVcMacAddress MacAddress,
iapBranchStatus INTEGER,
iapBranchInnerIpAddressType INTEGER,
iapBranchInnerIpAddress DisplayString,
iapBranchAssignedSubnet DisplayString,
iapBranchAssignedVlan OCTET STRING
}
iapBranchKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Key of the IAP branch."
::= { wlsxIapBranchEntry 1 }
iapBranchName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..129))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Name of the IAP branch."
::= { wlsxIapBranchEntry 2 }
iapBranchVcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of the Virtual Controller of the branch."
::= { wlsxIapBranchEntry 3 }
iapBranchStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the branch"
::= { wlsxIapBranchEntry 4 }
iapBranchInnerIpAddressType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inner IP Address type IPv4 or IPv6 of the branch."
::= { wlsxIapBranchEntry 5 }
iapBranchInnerIpAddress OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..45))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inner IPv4/IPv6 Address of the branch."
::= { wlsxIapBranchEntry 6 }
iapBranchAssignedSubnet OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Assigned subnets of the branch."
::= { wlsxIapBranchEntry 7 }
iapBranchAssignedVlan OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Assigned vlans of the branch.
A string of octets containing one bit per VLAN for a
total of 4096 VLANs in the management domain.
The most significant bit of the octet string is the
lowest value VLAN of 4096 VLANs.
By setting the bit(1) we indicate that the vlan is part of the
assigned vlans.
The most significant bit of the bitmap is transmitted
first. Note that if the length of this string is less than
512 octets, any 'missing' octets are assumed to contain
the value zero.
"
::= { wlsxIapBranchEntry 8 }
-- wlsxSwitchTraps
-- This group defines all the traps related to the switch platform.
wlsxSwitchTrapObjectsGroup OBJECT IDENTIFIER ::= { wlsxSwitchTraps 100 }
wlsxAuthServerName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate the
Authentication Server, used for Authentication.
"
::= { wlsxSwitchTrapObjectsGroup 1 }
wlsxAuthServerTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate the
Authentication Server Timeout.
"
::= { wlsxSwitchTrapObjectsGroup 2 }
wlsxFanNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate
a failing fan number.
"
::= { wlsxSwitchTrapObjectsGroup 4 }
wlsxLineCardNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate a
Line Card in the switch.
"
::= { wlsxSwitchTrapObjectsGroup 5 }
wlsxVoltageType OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate the
type of the voltage.
"
::= { wlsxSwitchTrapObjectsGroup 6 }
wlsxVoltageValue OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate the
voltage value in Float.
"
::= { wlsxSwitchTrapObjectsGroup 7 }
wlsxTemperatureValue OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate
Temperature Value.
"
::= { wlsxSwitchTrapObjectsGroup 8 }
wlsxProcessName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate a
process name.
"
::= { wlsxSwitchTrapObjectsGroup 9 }
wlsxStationMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Physical Address of the Station.
"
::= { wlsxSwitchTrapObjectsGroup 10 }
wlsxStationBlackListReason OBJECT-TYPE
SYNTAX INTEGER {
userDefined(1),
mitmAttack(2),
authFailure(3),
pingFlood(4),
sessionFlood(5),
synFlood(6),
sessionBlacklist(7),
ipSpoofing(8),
other(100)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Reason for which a station is black listed.
"
::= { wlsxSwitchTrapObjectsGroup 11 }
wlsxSpoofedIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify a Spoofed IP Address.
"
::= { wlsxSwitchTrapObjectsGroup 12 }
wlsxSpoofedOldPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify a Old Mac Address.
"
::= { wlsxSwitchTrapObjectsGroup 13 }
wlsxSpoofedNewPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify a New Mac Address.
"
::= { wlsxSwitchTrapObjectsGroup 14 }
wlsxDBName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify name of the Database.
"
::= { wlsxSwitchTrapObjectsGroup 15 }
wlsxDBUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify name of the Database user.
"
::= { wlsxSwitchTrapObjectsGroup 16 }
wlsxDBIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify the IpAddress of the DB.
"
::= { wlsxSwitchTrapObjectsGroup 17 }
wlsxDBType OBJECT-TYPE
SYNTAX INTEGER{
mssql(1),
mysql(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in a trap to identify the Port of the user.
"
::= { wlsxSwitchTrapObjectsGroup 18 }
wlsxVrID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object contains the Virtual Router Identifier.
"
::= { wlsxSwitchTrapObjectsGroup 19 }
wlsxVrMasterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object contains the Master IP address.
"
::= { wlsxSwitchTrapObjectsGroup 20 }
wlsxVrrpOperState OBJECT-TYPE
SYNTAX INTEGER {
initialize(1),
backup(2),
master(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object represents the VRRP operational state.
"
::= { wlsxSwitchTrapObjectsGroup 21 }
wlsxApTxPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object contains the value of the AP Transmit Power.
"
::= { wlsxSwitchTrapObjectsGroup 22 }
wlsxESIServerGrpName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object represents the External Services Interface
(ESI) Server Group name
"
::= { wlsxSwitchTrapObjectsGroup 23 }
wlsxESIServerName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object represents the External Services Interface
(ESI) Server name
"
::= { wlsxSwitchTrapObjectsGroup 24 }
wlsxESIServerIpaddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object represents the External Services Interface
(ESI) Server
IP Address
"
::= { wlsxSwitchTrapObjectsGroup 25 }
wlsxLicenseDaysRemaining OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object represents number of the days remaining prior
to a license expiry
"
::= { wlsxSwitchTrapObjectsGroup 26 }
wlsxSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Object is used in the traps to indicate a
Line Card in the switch. This value matches the value
of sysExtCardSlot.
"
::= { wlsxSwitchTrapObjectsGroup 27 }
wlsxStationBlackListReasonStr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
This object is used in the traps to indicate the
type of Blacklist reason.
"
::= { wlsxSwitchTrapObjectsGroup 28 }
-- Trap Definitions.
wlsxSwitchIPChanged NOTIFICATION-TYPE
OBJECTS {wlsxSwitchIp}
STATUS current
DESCRIPTION
"A trap which indicates that the switch IP address has changed."
::= { wlsxSwitchTraps 1001 }
wlsxSwitchRoleChange NOTIFICATION-TYPE
OBJECTS {wlsxSwitchRole}
STATUS current
DESCRIPTION
"A trap which indicates that the role of the switch has changed in
the Domain."
::= { wlsxSwitchTraps 1002 }
-- Authentication Traps.
wlsxUserEntryCreated NOTIFICATION-TYPE
OBJECTS {userPhyAddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a New user is created.
"
::= { wlsxSwitchTraps 1003 }
wlsxUserEntryDeleted NOTIFICATION-TYPE
OBJECTS {userPhyAddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a user is deleted.
"
::= { wlsxSwitchTraps 1004 }
wlsxUserEntryAuthenticated NOTIFICATION-TYPE
OBJECTS {userPhyAddress, userName, userAuthenticationMethod, userRole}
STATUS current
DESCRIPTION
"
A trap which indicates that a user is Authenticated.
"
::= { wlsxSwitchTraps 1005 }
wlsxUserEntryDeAuthenticated NOTIFICATION-TYPE
OBJECTS {userPhyAddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a user is Deauthenticated.
"
::= { wlsxSwitchTraps 1006 }
wlsxUserAuthenticationFailed NOTIFICATION-TYPE
OBJECTS {userPhyAddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a user authentication has failed.
"
::= { wlsxSwitchTraps 1007 }
wlsxAuthServerReqTimedOut NOTIFICATION-TYPE
OBJECTS {wlsxAuthServerName}
STATUS current
DESCRIPTION
"
A trap which indicates that the authentication server request
timed out.
"
::= { wlsxSwitchTraps 1008 }
wlsxAuthServerTimedOut NOTIFICATION-TYPE
OBJECTS {wlsxAuthServerName, wlsxAuthServerTimeout}
STATUS current
DESCRIPTION
"
A trap which indicates that the authentication server
timed out.
"
::= { wlsxSwitchTraps 1009 }
wlsxAuthServerIsUp NOTIFICATION-TYPE
OBJECTS {wlsxAuthServerName}
STATUS current
DESCRIPTION
"
A trap which indicates that the authentication server is up.
"
::= { wlsxSwitchTraps 1010 }
wlsxAuthMaxUserEntries NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the User Entries table is full and
cannot add any more entries.
"
::= { wlsxSwitchTraps 1011 }
wlsxAuthMaxAclEntries NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the Acl Entries table is full and
cannot add any more entries.
"
::= { wlsxSwitchTraps 1012 }
wlsxAuthMaxBWContracts NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the switch reached the maximum number of
configurable Bandwidth contracts.
"
::= { wlsxSwitchTraps 1013 }
-- Platform Traps.
wlsxPowerSupplyFailure NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the power supply has failed.
"
::= { wlsxSwitchTraps 1014 }
wlsxFanFailure NOTIFICATION-TYPE
OBJECTS {wlsxFanNumber}
STATUS current
DESCRIPTION
"
A trap which indicates that the fan has failed.
"
::= { wlsxSwitchTraps 1015 }
wlsxOutOfRangeVoltage NOTIFICATION-TYPE
OBJECTS {wlsxVoltageType, wlsxVoltageValue}
STATUS current
DESCRIPTION
"
A trap which indicates that the switch received out of range
voltage.
"
::= { wlsxSwitchTraps 1016 }
wlsxOutOfRangeTemperature NOTIFICATION-TYPE
OBJECTS {wlsxTemperatureValue}
STATUS current
DESCRIPTION
"
A trap which indicates that the Temperature is out of bounds.
"
::= { wlsxSwitchTraps 1017 }
wlsxLCInserted NOTIFICATION-TYPE
OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
STATUS current
DESCRIPTION
"
A trap which indicates that a Line card is inserted.
"
::= { wlsxSwitchTraps 1018 }
wlsxSCInserted NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that a supervisory card is inserted.
"
::= { wlsxSwitchTraps 1019 }
wlsxGBICInserted NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that a GBIC is inserted in a line card.
"
::= { wlsxSwitchTraps 1020 }
wlsxProcessDied NOTIFICATION-TYPE
OBJECTS {wlsxProcessName}
STATUS current
DESCRIPTION
"
A trap which indicates that a process has died.
"
::= { wlsxSwitchTraps 1021 }
wlsxProcessExceedsMemoryLimits NOTIFICATION-TYPE
OBJECTS {wlsxProcessName}
STATUS current
DESCRIPTION
"
A trap which indicates that a process is consuming large
amounts of memory.
"
::= { wlsxSwitchTraps 1022 }
wlsxLowOnFlashSpace NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the switch is running low on flash space.
"
::= { wlsxSwitchTraps 1023 }
wlsxLowMemory NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the system free memory is low.
"
::= { wlsxSwitchTraps 1024 }
wlsxFanTrayRemoved NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the fan tray is removed.
"
::= { wlsxSwitchTraps 1025 }
wlsxFanTrayInserted NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the fan tray is removed.
"
::= { wlsxSwitchTraps 1026 }
wlsxLCRemoved NOTIFICATION-TYPE
OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
STATUS current
DESCRIPTION
"
A trap which indicates that a Line card is removed.
"
::= { wlsxSwitchTraps 1027 }
wlsxSCRemoved NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that a supervisory card is removed.
"
::= { wlsxSwitchTraps 1028 }
wlsxPowerSupplyMissing NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the power supply is missing.
"
::= { wlsxSwitchTraps 1029 }
-- Access point up/down traps.
wlsxAccessPointIsUp NOTIFICATION-TYPE
OBJECTS {apLocation, apIpAddress}
STATUS deprecated
DESCRIPTION
"
A trap which indicates that an Access point at Location
apLocation and Address apIpAddress is up.
"
::= { wlsxSwitchTraps 1030 }
wlsxAccessPointIsDown NOTIFICATION-TYPE
OBJECTS {apLocation, apIpAddress}
STATUS deprecated
DESCRIPTION
"
A trap which indicates that an Access point at Location
apLocation and Address apIpAddress is down.
"
::= { wlsxSwitchTraps 1031}
wlsxCoverageHoleDetected NOTIFICATION-TYPE
OBJECTS {apLocation, apIpAddress, wlsxStationMacAddress}
STATUS current
DESCRIPTION
"
A trap which indicates that an Access point at Location
apLocation and Address apIpAddress has detected a Coverage Hole.
"
::= { wlsxSwitchTraps 1032}
wlsxChannelChanged NOTIFICATION-TYPE
OBJECTS {apLocation, apIpAddress, apCurrentChannel}
STATUS deprecated
DESCRIPTION
"
A trap which indicates that an Access point at Location
apLocation and Address apIpAddress has changed the channel to
apCurrentChannel.
"
::= { wlsxSwitchTraps 1033}
wlsxStationAddedToBlackList NOTIFICATION-TYPE
OBJECTS {wlsxStationMacAddress, wlsxStationBlackListReason, wlsxStationBlackListReasonStr}
STATUS current
DESCRIPTION
"
A trap which indicates that a station with address
wlsxStationMacAddress is black listed for
wlsxStationBlackListReason reason.
"
::= { wlsxSwitchTraps 1034}
wlsxStationRemovedFromBlackList NOTIFICATION-TYPE
OBJECTS {wlsxStationMacAddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a station with address
wlsxStationMacAddress is removed from black list.
"
::= { wlsxSwitchTraps 1035}
wlsxIpSpoofingDetected NOTIFICATION-TYPE
OBJECTS {wlsxSpoofedIpAddress, wlsxSpoofedOldPhyAddress, wlsxSpoofedNewPhyAddress}
STATUS current
DESCRIPTION
"
A trap indicating that the switch detected IP Spoofing.
"
::= { wlsxSwitchTraps 1036}
wlsxDBCommunicationFailure NOTIFICATION-TYPE
OBJECTS {wlsxDBName, wlsxDBUserName, wlsxDBIpAddress, wlsxDBType}
STATUS current
DESCRIPTION
"
A trap to indicate that communication with Database failed.
"
::= { wlsxSwitchTraps 1037}
wlsxVrrpStateChange NOTIFICATION-TYPE
OBJECTS {wlsxVrID, wlsxVrMasterIp, wlsxVrrpOperState}
STATUS current
DESCRIPTION
"
A trap which indicates that VRRP State has changed on the switch.
"
::= { wlsxSwitchTraps 1038}
wlsxAPRadioAttributesChanged NOTIFICATION-TYPE
OBJECTS {apLocation, apIpAddress, apCurrentChannel, wlsxApTxPower}
STATUS current
DESCRIPTION
"
A trap which indicates changes in the Radio attributes of an
Access Point at location apLocation and address apIpAddress.
Ap channel is apCurrentChannel, and Transmit power is
apTxPower.
"
::= { wlsxSwitchTraps 1039}
wlsxESIServerUp NOTIFICATION-TYPE
OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a ESI server <wlsxESIServerName> in
group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up
"
::= { wlsxSwitchTraps 1040}
wlsxESIServerDown NOTIFICATION-TYPE
OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
STATUS current
DESCRIPTION
"
A trap which indicates that a ESI server <wlsxESIServerName> in
group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down
"
::= { wlsxSwitchTraps 1041}
wlsxLicenseExpiry NOTIFICATION-TYPE
OBJECTS {wlsxLicenseDaysRemaining}
STATUS current
DESCRIPTION
"
A trap which indicates that one or more licenses on the
switch will expire in <wlsxLicenseDaysRemaining> days
"
::= { wlsxSwitchTraps 1042}
wlsxAceUsageThreshold NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the Acl Entries table has reached
eighty percent of the maximum limit.
"
::= { wlsxSwitchTraps 1043 }
wlsxFanAbsent NOTIFICATION-TYPE
OBJECTS {wlsxFanNumber}
STATUS current
DESCRIPTION
"
A trap which indicates that the fan is absent.
"
::= { wlsxSwitchTraps 1044 }
wlsxWebCCLicenseEnforcement NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the WebCC license enforcement has
been triggered.
"
::= { wlsxSwitchTraps 1045 }
wlsxLowOnFlash1Space NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"
A trap which indicates that the switch is running low on flash1 space.
"
::= { wlsxSwitchTraps 1046 }
wlsxSwitchIPv6Changed NOTIFICATION-TYPE
OBJECTS {wlsxSwitchIpv6}
STATUS current
DESCRIPTION
"A trap which indicates that the switch IPv6 address has changed."
::= { wlsxSwitchTraps 1047 }
wlsxDot1xThresholdLimitHit NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A Trap which indicates that the controller is running on high optimum limit."
::= { wlsxSwitchTraps 1048 }
wlsxDot1xTotalLimitHit NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" A Trap which indicates that the controller is running on full optimum limit."
::= { wlsxSwitchTraps 1049 }
END
Reference in New Issue Copy Permalink