mibs/MIBS/audiocodes/AcPerfMediaGateway

438 lines
13 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
AcPerfMediaGateway DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY FROM SNMPv2-SMI
enterprises FROM SNMPv2-SMI;
audioCodes OBJECT IDENTIFIER ::= {enterprises 5003}
acRegistrations OBJECT IDENTIFIER ::= {audioCodes 7}
acGeneric OBJECT IDENTIFIER ::= {audioCodes 8}
acProducts OBJECT IDENTIFIER ::= {audioCodes 9}
acPerformance OBJECT IDENTIFIER ::= {audioCodes 10}
acPerfMediaGateway MODULE-IDENTITY
LAST-UPDATED "200407121502Z" --Monday, July 12, 2004
ORGANIZATION "AudioCodes Ltd"
CONTACT-INFO
"Postal: Support
AudioCodes LTD
1 Hayarden Street
Airport City
Lod, ISRAEL 70151
Tel: 972-3-9764000
Fax: 972-3-9764040
Email: support@audiocodes.com
Web: www.audiocodes.com"
DESCRIPTION
"This MIB defines the enterprise-specific objects needed
to support performance management of the AudioCodes product.
Performance measurements are grouped into the following MIB trees:
acPerfCp - performance measurements related to the control protocol
acPerfRtp - performance measurements related to RTP streams
acPerfSystem - performance measurements related to network element as a whole"
REVISION "200311200000Z"
DESCRIPTION
"Version 4.4. November 20, 2003. Made these changes:
o Initial revision"
::= {acPerformance 1}
--
-- Abbreviations used:
-- Annc announcement(s)
-- IVR Interactive Voice Response
-- CallAgent CallAgentConnection
-- Conf Conferencing
-- CP Control Protocol
-- NE network element
-- TT Test Trunks
--
-- The following conventions are used in this MIB:
-- The "Product" attribute lists the products in which the
-- performance measurement is maintained. Current products
-- are:
--
-- Media Servers
-- IPmedia 2000
-- Media Gateways
-- Mediant 2000/5000/8000 (wireline)
-- Stretto 2000/5000/8000 (wireless)
--
-- The "Capabilities" attribute lists the capabilities that must be
-- configured on the system for the performance measurement to be
-- maintained. The possible values are IVR, Conferencing, BCT, TT
-- and Trunking Gateway. Some performance measurements are not
-- related to any particular capabilities. In those cases, the value
-- of Capabilities attribute is "All".
-- ****************************************
-- acPerfCp Configuration
-- ****************************************
acPerfCp OBJECT IDENTIFIER ::= {acPerfMediaGateway 1}
acPerfCpNumDupsForCompletedTransactions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times a duplicate transaction request was received
after the initial transaction had already been completed. In this
case, the gateway resends the response for this transaction.
Products: All
Capabilities: All"
::= {acPerfCp 1}
acPerfCpNumDupsForOutstandingTransactions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times a duplicate transaction request was received
while the initial transaction was outstanding, that is, still in
progress. In this case, the gateway ignores the duplicate request.
Products: All
Capabilities: All"
::= {acPerfCp 2}
acPerfCpMessageSendSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times there was a success in sending
a call control (H.248) message. Call control messages
are sent using the system's socket library.
This counter tracks successes in using the local
socket services. It does not track successes in end-to-end
message transfer between the gateway and the call agent.
Products: All
Capabilities: All"
::= {acPerfCp 3}
acPerfCpMessageSendErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times there was a failure in sending a call control
(H.248) message. The message is sent via a datagram
using the system's socket library. Normally a failure on a
socket send operation would be attributed to an internal
system problem.
Products: All
Capabilities: All"
::= {acPerfCp 4}
acPerfCpMessageReceiveSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times there was a success in receiving
a call control (H.248) message. Call control messages
are received using the system's socket library.
This counter tracks successes in using the local
socket services. It does not track successes in end-to-end
message transfer between the gateway and the call agent.
Products: All
Capabilities: All"
::= {acPerfCp 5}
acPerfCpMessageReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times there was a failure in receiving a call control
( H.248) message. Call control messages are received
using the system's socket library. A failure on the socket
receive operation can be attributed to an internal system
problem or with the call agent sending a message larger than
what is supported by the gateway.
Products: All
Capabilities: All"
::= {acPerfCp 6}
acPerfCpProtocolSyntaxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of syntax errors detected in incoming call control
(H.248) messages.
Products: All
Capabilities: All"
::= {acPerfCp 7}
acPerfCpMessageRetransmissions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Each time the call engine times out waiting for an acknowledgement
it retransmits the control protocol message, unless the number of
max retransmissions is exceeded. This counter is incremented each time
a message is retransmitted due to a timeout.
Products: All
Capabilities: All"
::= {acPerfCp 8}
acPerfCpMessageMaxRetransmissionsExceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times the call control message maximum retransmission count was
exceeded. The gateway attempted several times to send a message to the call
agent, but each time, an ack was not received. A failure of this type
results in a failed call and is usually an indication that subsequent
calls will fail. This problem is typically a result of the call agent
being down or a result of a network problem.
Products: All
Capabilities: All"
::= {acPerfCp 9}
acPerfCpMessagesFromUntrustedSources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of messages received from untrusted sources, that is from network
nodes other than the node on which the call agent is running.
Products: All
Capabilities: All"
::= {acPerfCp 10}
-- ****************************************
-- acPerfRtp Configuration
-- ****************************************
acPerfRtp OBJECT IDENTIFIER ::= {acPerfMediaGateway 2}
acPerfRtpSenderPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of RTP packets sent by the system for this card.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 1}
acPerfRtpSenderOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of non-header RTP octets sent by this card.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 2}
acPerfRtpReceiverPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of RTP packets received by the system for this card.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 3}
acPerfRtpReceiverOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of non-header RTP octets received by this card.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 4}
acPerfRtpRcvrLostPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of RTP packets lost as observed by this card.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 5}
acPerfRtpFailedDueToLackOfResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of times a rtp request was rejected due to lack of resources
since the last application restart.
Products: IPmedia 2000"
::= {acPerfRtp 6}
acPerfRtpSimplexInSessionsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of simplex input RTP sessions.
A simplex (one-way) session would be used to play an announcement.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 7}
acPerfRtpSimplexInSessionsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Current number of simplex input RTP sessions.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 8}
acPerfRtpSimplexOutSessionsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of simplex output RTP sessions.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 9}
acPerfRtpSimplexOutSessionsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Current number of simplex output RTP sessions.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 10}
acPerfRtpDuplexSessionsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of duplex RTP sessions.
A duplex (two-way) session would be used for conferencing.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 11}
acPerfRtpDuplexSessionsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Current number of duplex RTP sessions.
Products: All IP-based products
Capabilities: IVR, BCT, Conferencing, Test Trunks"
::= {acPerfRtp 12}
-- ****************************************
-- acPerfSystem Configuration
-- ****************************************
acPerfSystem OBJECT IDENTIFIER ::= {acPerfMediaGateway 3}
acPerfSystemPacketEndpoints OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of endpoints reserved for all packet network-related functions (conferencing, plays, etc.). This is an attribute that is derived from the type of hardware and the values of certain config parameters. Currently, its value is fixed after init-time. In the future, it's value might be impacted by configuration of online parameters. That is, its value might increase or decrease over time. For example, in a multi-card system, addition of a board would cause it to increase.
Products: All
Capabilities: All
"
::= {acPerfSystem 1}
acPerfSystemPacketEndpointsInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of endpoints that the call engine is currently using for
all packet network-related functions (conferencing, plays, etc.).
Products: All
Capabilities: All"
::= {acPerfSystem 2}
END