david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/audiocodes/RTP-MIB

1022 lines
38 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
RTP-MIB
DEFINITIONS ::= BEGIN
IMPORTS
Counter32, Counter64, Gauge32, mib-2, Integer32,
MODULE-IDENTITY,
OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI
RowStatus, TAddress,
TDomain, TestAndIncr,
TimeStamp, TruthValue FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF;
rtpMIB MODULE-IDENTITY
LAST-UPDATED "200010020000Z" -- 2 October 2000
ORGANIZATION
"IETF AVT Working Group
Email: rem-conf@es.net"
CONTACT-INFO
"Mark Baugher
Postal: Intel Corporation
2111 NE 25th Avenue
Hillsboro, OR 97124
United States
Tel: +1 503 466 8406
Email: mbaugher@passedge.com
Bill Strahm
Postal: Intel Corporation
2111 NE 25th Avenue
Hillsboro, OR 97124
United States
Tel: +1 503 264 4632
Email: bill.strahm@intel.com
Irina Suconick
Postal: Ennovate Networks
60 Codman Hill Rd.,
Boxboro, Ma 01719
Tel: +1 781-505-2155
Email: irina@ennovatenetworks.com"
DESCRIPTION
"The managed objects of RTP systems. The MIB is
structured around three types of information.
1. General information about RTP sessions such
as the session address.
2. Information about RTP streams being sent to
an RTP session by a particular sender.
3. Information about RTP streams received on an
RTP session by a particular receiver from a
particular sender.
There are two types of RTP Systems, RTP hosts and
RTP monitors. As described below, certain objects
are unique to a particular type of RTP System. An
RTP host may also function as an RTP monitor.
Refer to RFC 1889, 'RTP: A Transport Protocol for
Real-Time Applications,' section 3.0, for definitions."
REVISION "200010020000Z" -- 2 October 2000
DESCRIPTION "Initial version of this MIB.
Published as RFC 2959."
::= { mib-2 87 }
InterfaceIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each interface
or interface sub-layer in the managed system. It is
recommended that values are assigned contiguously
starting from 1. The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization."
SYNTAX Integer32
Utf8String ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1024a"
STATUS current
DESCRIPTION
"To facilitate internationalization, this TC
represents information taken from the ISO/IEC IS
10646-1 character set, encoded as an octet string
using the UTF-8 character encoding scheme described
in RFC 2044 [10]. For strings in 7-bit US-ASCII,
there is no impact since the UTF-8 representation
is identical to the US-ASCII encoding."
SYNTAX OCTET STRING (SIZE (0..1024))
--
-- OBJECTS
--
rtpMIBObjects OBJECT IDENTIFIER ::= { rtpMIB 1 }
rtpConformance OBJECT IDENTIFIER ::= { rtpMIB 2 }
--
-- SESSION NEW INDEX
--
rtpSessionNewIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to assign values to rtpSessionIndex
as described in 'Textual Conventions for SMIv2'. For an RTP
system that supports the creation of rows, the network manager
would read the object, and then write the value back in
the Set that creates a new instance of rtpSessionEntry. If
the Set fails with the code 'inconsistentValue,' then the
process must be repeated; If the Set succeeds, then the object
is incremented, and the new instance is created according to
the manager's directions. However, if the RTP agent is not
acting as a monitor, only the RTP agent may create conceptual
rows in the RTP session table."
::= { rtpMIBObjects 1 }
--
-- SESSION INVERSE TABLE
--
rtpSessionInverseTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtpSessionInverseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps rtpSessionDomain, rtpSessionRemAddr, and rtpSessionLocAddr
TAddress pairs to one or more rtpSessionIndex values, each
describing a row in the rtpSessionTable. This makes it possible
to retrieve the row(s) in the rtpSessionTable corresponding to a
given session without having to walk the entire (potentially
large) table."
::= { rtpMIBObjects 2 }
rtpSessionInverseEntry OBJECT-TYPE
SYNTAX RtpSessionInverseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to exactly one entry in the
rtpSessionTable - the entry containing the tuple,
rtpSessionDomain, rtpSessionRemAddr, rtpSessionLocAddr
and rtpSessionIndex."
INDEX { rtpSessionDomain, rtpSessionRemAddr, rtpSessionLocAddr,
rtpSessionIndex }
::= { rtpSessionInverseTable 1 }
RtpSessionInverseEntry ::= SEQUENCE {
rtpSessionInverseStartTime TimeStamp
}
rtpSessionInverseStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SysUpTime at the time that this row was
created."
::= { rtpSessionInverseEntry 1 }
--
-- SESSION TABLE
--
rtpSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtpSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There's one entry in rtpSessionTable for each RTP session
on which packets are being sent, received, and/or
monitored."
::= { rtpMIBObjects 3 }
rtpSessionEntry OBJECT-TYPE
SYNTAX RtpSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data in rtpSessionTable uniquely identify an RTP session. A
host RTP agent MUST create a read-only row for each session to
which packets are being sent or received. Rows MUST be created
by the RTP Agent at the start of a session when one or more
senders or receivers are observed. Rows created by an RTP agent
MUST be deleted when the session is over and there are no
rtpRcvrEntry and no rtpSenderEntry for this session. An RTP
session SHOULD be monitored to create management information on
all RTP streams being sent or received when the
rtpSessionMonitor has the TruthValue of 'true(1)'. An RTP
monitor SHOULD permit row creation with the side effect of
causing the RTP System to join the multicast session for the
purposes of gathering management information (additional
conceptual rows are created in the rtpRcvrTable and
rtpSenderTable). Thus, rtpSessionTable rows SHOULD be created
for RTP session monitoring purposes. Rows created by a
management application SHOULD be deleted via SNMP operations by
management applications. Rows created by management operations
are deleted by management operations by setting
rtpSessionRowStatus to 'destroy(6)'."
INDEX { rtpSessionIndex }
::= { rtpSessionTable 1 }
RtpSessionEntry ::= SEQUENCE {
rtpSessionIndex Integer32,
rtpSessionDomain TDomain,
rtpSessionRemAddr TAddress,
rtpSessionLocAddr TAddress,
rtpSessionIfIndex InterfaceIndex,
rtpSessionSenderJoins Counter32,
rtpSessionReceiverJoins Counter32,
rtpSessionByes Counter32,
rtpSessionStartTime TimeStamp,
rtpSessionMonitor TruthValue,
rtpSessionRowStatus RowStatus
}
rtpSessionIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the conceptual row which is for SNMP purposes
only and has no relation to any protocol value. There is
no requirement that these rows are created or maintained
sequentially."
::= { rtpSessionEntry 1 }
rtpSessionDomain OBJECT-TYPE
SYNTAX TDomain
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transport-layer protocol used for sending or receiving
the stream of RTP data packets on this session.
Cannot be changed if rtpSessionRowStatus is 'active'."
::= { rtpSessionEntry 2 }
rtpSessionRemAddr OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address to which RTP packets are sent by the RTP system.
In an IP multicast RTP session, this is the single address used
by all senders and receivers of RTP session data. In a unicast
RTP session this is the unicast address of the remote RTP system.
'The destination address pair may be common for all participants,
as in the case of IP multicast, or may be different for each, as
in the case of individual unicast network address pairs.' See
RFC 1889, 'RTP: A Transport Protocol for Real-Time Applications,'
sec. 3. The transport service is identified by rtpSessionDomain.
For snmpUDPDomain, this is an IP address and even-numbered UDP
Port with the RTCP being sent on the next higher odd-numbered
port, see RFC 1889, sec. 5."
::= { rtpSessionEntry 3 }
rtpSessionLocAddr OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local address used by the RTP system. In an IP multicast
RTP session, rtpSessionRemAddr will be the same IP multicast
address as rtpSessionLocAddr. In a unicast RTP session,
rtpSessionRemAddr and rtpSessionLocAddr will have different
unicast addresses. See RFC 1889, 'RTP: A Transport Protocol for
Real-Time Applications,' sec. 3. The transport service is
identified by rtpSessionDomain. For snmpUDPDomain, this is an IP
address and even-numbered UDP Port with the RTCP being sent on
the next higher odd-numbered port, see RFC 1889, sec. 5."
::= { rtpSessionEntry 4 }
rtpSessionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex value is set to the corresponding value
from IF-MIB (See RFC 2233, 'The Interfaces Group MIB using
SMIv2'). This is the interface that the RTP stream is being sent
to or received from, or in the case of an RTP Monitor the
interface that RTCP packets will be received on. Cannot be
changed if rtpSessionRowStatus is 'active'."
::= { rtpSessionEntry 5 }
rtpSessionSenderJoins OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of senders that have been observed to have
joined the session since this conceptual row was created
(rtpSessionStartTime). A sender 'joins' an RTP
session by sending to it. Senders that leave and then
re-join following an RTCP BYE (see RFC 1889, 'RTP: A
Transport Protocol for Real-Time Applications,' sec. 6.6)
or session timeout may be counted twice. Every time a new
RTP sender is detected either using RTP or RTCP, this counter
is incremented."
::= { rtpSessionEntry 6 }
rtpSessionReceiverJoins OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of receivers that have been been observed to
have joined this session since this conceptual row was
created (rtpSessionStartTime). A receiver 'joins' an RTP
session by sending RTCP Receiver Reports to the session.
Receivers that leave and then re-join following an RTCP BYE
(see RFC 1889, 'RTP: A Transport Protocol for Real-Time
Applications,' sec. 6.6) or session timeout may be counted
twice."
::= { rtpSessionEntry 7 }
rtpSessionByes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of RTCP BYE (see RFC 1889, 'RTP: A Transport
Protocol for Real-Time Applications,' sec. 6.6) messages
received by this entity."
::= { rtpSessionEntry 8 }
rtpSessionStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SysUpTime at the time that this row was
created."
::= { rtpSessionEntry 9 }
rtpSessionMonitor OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean, Set to 'true(1)' if remote senders or receivers in
addition to the local RTP System are to be monitored using RTCP.
RTP Monitors MUST initialize to 'true(1)' and RTP Hosts SHOULD
initialize this 'false(2)'. Note that because 'host monitor'
systems are receiving RTCP from their remote participants they
MUST set this value to 'true(1)'."
::= { rtpSessionEntry 10 }
rtpSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Value of 'active' when RTP or RTCP messages are being
sent or received by an RTP System. A newly-created
conceptual row must have the all read-create objects
initialized before becoming 'active'.
A conceptual row that is in the 'notReady' or 'notInService'
state MAY be removed after 5 minutes."
::= { rtpSessionEntry 11 }
--
-- SENDER INVERSE TABLE
--
rtpSenderInverseTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtpSenderInverseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps rtpSenderAddr, rtpSessionIndex, to the rtpSenderSSRC
index of the rtpSenderTable. This table allows management
applications to find entries sorted by rtpSenderAddr rather than
sorted by rtpSessionIndex. Given the rtpSessionDomain and
rtpSenderAddr, a set of rtpSessionIndex and rtpSenderSSRC values
can be returned from a tree walk. When rtpSessionIndex is
specified in the SNMP Get-Next operations, one or more
rtpSenderSSRC values may be returned."
::= { rtpMIBObjects 4 }
rtpSenderInverseEntry OBJECT-TYPE
SYNTAX RtpSenderInverseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to exactly one entry in the
rtpSenderTable - the entry containing the index pair,
rtpSessionIndex, rtpSenderSSRC."
INDEX { rtpSessionDomain, rtpSenderAddr, rtpSessionIndex,
rtpSenderSSRC }
::= { rtpSenderInverseTable 1 }
RtpSenderInverseEntry ::= SEQUENCE {
rtpSenderInverseStartTime TimeStamp
}
rtpSenderInverseStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SysUpTime at the time that this row was
created."
::= { rtpSenderInverseEntry 1 }
--
-- SENDERS TABLE
--
rtpSenderTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtpSenderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about a sender or senders to an RTP
Session. RTP sending hosts MUST have an entry in this table
for each stream being sent. RTP receiving hosts MAY have an
entry in this table for each sending stream being received by
this host. RTP monitors MUST create an entry for each observed
sender to a multicast RTP Session as a side-effect when a
conceptual row in the rtpSessionTable is made 'active' by a
manager."
::= { rtpMIBObjects 5 }
rtpSenderEntry OBJECT-TYPE
SYNTAX RtpSenderEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information from a single RTP Sender
Synchronization Source (SSRC, see RFC 1889 'RTP: A Transport
Protocol for Real-Time Applications' sec.6). The session is
identified to the the SNMP entity by rtpSessionIndex.
Rows are removed by the RTP agent when a BYE is received
from the sender or when the sender times out (see RFC
1889, Sec. 6.2.1) or when the rtpSessionEntry is deleted."
INDEX { rtpSessionIndex, rtpSenderSSRC }
::= { rtpSenderTable 1 }
RtpSenderEntry ::= SEQUENCE {
rtpSenderSSRC Unsigned32,
rtpSenderCNAME Utf8String,
rtpSenderAddr TAddress,
rtpSenderPackets Counter64,
rtpSenderOctets Counter64,
rtpSenderTool Utf8String,
rtpSenderSRs Counter32,
rtpSenderSRTime TimeStamp,
rtpSenderPT INTEGER,
rtpSenderStartTime TimeStamp
}
rtpSenderSSRC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RTP SSRC, or synchronization source identifier of the
sender. The RTP session address plus an SSRC uniquely
identify a sender to an RTP session (see RFC 1889, 'RTP: A
Transport Protocol for Real-Time Applications' sec.3)."
::= { rtpSenderEntry 1 }
rtpSenderCNAME OBJECT-TYPE
SYNTAX Utf8String
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RTP canonical name of the sender."
::= { rtpSenderEntry 2 }
rtpSenderAddr OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unicast transport source address of the sender. In the
case of an RTP Monitor this address is the address that the
sender is using to send its RTCP Sender Reports."
::= { rtpSenderEntry 3 }
rtpSenderPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of RTP packets sent by this sender, or observed by
an RTP monitor, since rtpSenderStartTime."
::= { rtpSenderEntry 4 }
rtpSenderOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of non-header RTP octets sent by this sender, or observed
by an RTP monitor, since rtpSenderStartTime."
::= { rtpSenderEntry 5 }
rtpSenderTool OBJECT-TYPE
SYNTAX Utf8String (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the application program source of the stream."
::= { rtpSenderEntry 6 }
rtpSenderSRs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of RTCP Sender Reports that have
been sent from this sender, or observed if the RTP entity
is a monitor, since rtpSenderStartTime."
::= { rtpSenderEntry 7 }
rtpSenderSRTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"rtpSenderSRTime is the value of SysUpTime at the time that
the last SR was received from this sender, in the case of a
monitor or receiving host. Or sent by this sender, in the
case of a sending host."
::= { rtpSenderEntry 8 }
rtpSenderPT OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Payload type from the RTP header of the most recently received
RTP Packet (see RFC 1889, 'RTP: A Transport Protocol for
Real-Time Applications' sec. 5)."
::= { rtpSenderEntry 9 }
rtpSenderStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SysUpTime at the time that this row was
created."
::= { rtpSenderEntry 10 }
--
-- RECEIVER INVERSE TABLE
--
rtpRcvrInverseTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtpRcvrInverseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps rtpRcvrAddr and rtpSessionIndex to the rtpRcvrSRCSSRC and
rtpRcvrSSRC indexes of the rtpRcvrTable. This table allows
management applications to find entries sorted by rtpRcvrAddr
rather than by rtpSessionIndex. Given rtpSessionDomain and
rtpRcvrAddr, a set of rtpSessionIndex, rtpRcvrSRCSSRC, and
rtpRcvrSSRC values can be returned from a tree walk. When
rtpSessionIndex is specified in SNMP Get-Next operations, one or
more rtpRcvrSRCSSRC and rtpRcvrSSRC pairs may be returned."
::= { rtpMIBObjects 6 }
rtpRcvrInverseEntry OBJECT-TYPE
SYNTAX RtpRcvrInverseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to exactly one entry in the
rtpRcvrTable - the entry containing the index pair,
rtpSessionIndex, rtpRcvrSSRC."
INDEX { rtpSessionDomain, rtpRcvrAddr, rtpSessionIndex,
rtpRcvrSRCSSRC, rtpRcvrSSRC }
::= { rtpRcvrInverseTable 1 }
RtpRcvrInverseEntry ::= SEQUENCE {
rtpRcvrInverseStartTime TimeStamp
}
rtpRcvrInverseStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SysUpTime at the time that this row was
created."
::= { rtpRcvrInverseEntry 1 }
--
-- RECEIVERS TABLE
--
rtpRcvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtpRcvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about a receiver or receivers of RTP
session data. RTP hosts that receive RTP session packets
MUST create an entry in this table for that receiver/sender
pair. RTP hosts that send RTP session packets MAY create
an entry in this table for each receiver to their stream
using RTCP feedback from the RTP group. RTP monitors
create an entry for each observed RTP session receiver as
a side effect when a conceptual row in the rtpSessionTable
is made 'active' by a manager."
::= { rtpMIBObjects 7 }
rtpRcvrEntry OBJECT-TYPE
SYNTAX RtpRcvrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information from a single RTP
Synchronization Source that is receiving packets from the
sender identified by rtpRcvrSRCSSRC (SSRC, see RFC 1889,
'RTP: A Transport Protocol for Real-Time Applications'
sec.6). The session is identified to the the RTP Agent entity
by rtpSessionIndex. Rows are removed by the RTP agent when
a BYE is received from the sender or when the sender times
out (see RFC 1889, Sec. 6.2.1) or when the rtpSessionEntry is
deleted."
INDEX { rtpSessionIndex, rtpRcvrSRCSSRC, rtpRcvrSSRC }
::= { rtpRcvrTable 1 }
RtpRcvrEntry ::= SEQUENCE {
rtpRcvrSRCSSRC Unsigned32,
rtpRcvrSSRC Unsigned32,
rtpRcvrCNAME Utf8String,
rtpRcvrAddr TAddress,
rtpRcvrRTT Gauge32,
rtpRcvrLostPackets Counter64,
rtpRcvrJitter Gauge32,
rtpRcvrTool Utf8String,
rtpRcvrRRs Counter32,
rtpRcvrRRTime TimeStamp,
rtpRcvrPT INTEGER,
rtpRcvrPackets Counter64,
rtpRcvrOctets Counter64,
rtpRcvrStartTime TimeStamp
}
rtpRcvrSRCSSRC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RTP SSRC, or synchronization source identifier of the
sender. The RTP session address plus an SSRC uniquely
identify a sender or receiver of an RTP stream (see RFC
1889, 'RTP: A Transport Protocol for Real-Time
Applications' sec.3)."
::= { rtpRcvrEntry 1 }
rtpRcvrSSRC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RTP SSRC, or synchronization source identifier of the
receiver. The RTP session address plus an SSRC uniquely
identify a receiver of an RTP stream (see RFC 1889, 'RTP:
A Transport Protocol for Real-Time Applications' sec.3)."
::= { rtpRcvrEntry 2 }
rtpRcvrCNAME OBJECT-TYPE
SYNTAX Utf8String
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RTP canonical name of the receiver."
::= { rtpRcvrEntry 3 }
rtpRcvrAddr OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unicast transport address on which the receiver is
receiving RTP packets and/or RTCP Receiver Reports."
::= { rtpRcvrEntry 4 }
rtpRcvrRTT OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The round trip time measurement taken by the source of the
RTP stream based on the algorithm described on sec. 6 of
RFC 1889, 'RTP: A Transport Protocol for Real-Time
Applications.' This algorithm can produce meaningful
results when the RTP agent has the same clock as the stream
sender (when the RTP monitor is also the sending host for the
particular receiver). Otherwise, the entity should return
'noSuchInstance' in response to queries against rtpRcvrRTT."
::= { rtpRcvrEntry 5 }
rtpRcvrLostPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of RTP packets lost as observed by this receiver
since rtpRcvrStartTime."
::= { rtpRcvrEntry 6 }
rtpRcvrJitter OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of delay variation as observed by this
receiver. (see RFC 1889, 'RTP: A Transport Protocol
for Real-Time Applications' sec.6.3.1 and A.8)."
::= { rtpRcvrEntry 7 }
rtpRcvrTool OBJECT-TYPE
SYNTAX Utf8String (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the application program source of the stream."
::= { rtpRcvrEntry 8 }
rtpRcvrRRs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of RTCP Receiver Reports that have
been sent from this receiver, or observed if the RTP entity
is a monitor, since rtpRcvrStartTime."
::= { rtpRcvrEntry 9 }
rtpRcvrRRTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"rtpRcvrRRTime is the value of SysUpTime at the time that the
last RTCP Receiver Report was received from this receiver, in
the case of a monitor or RR receiver (the RTP Sender). It is
the value of SysUpTime at the time that the last RR was sent by
this receiver in the case of an RTP receiver sending the RR."
::= { rtpRcvrEntry 10 }
rtpRcvrPT OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Static or dynamic payload type from the RTP header (see
RFC 1889, 'RTP: A Transport Protocol for Real-Time
Applications' sec. 5)."
::= { rtpRcvrEntry 11 }
rtpRcvrPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of RTP packets received by this RTP host receiver
since rtpRcvrStartTime."
::= { rtpRcvrEntry 12 }
rtpRcvrOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of non-header RTP octets received by this receiving RTP
host since rtpRcvrStartTime."
::= { rtpRcvrEntry 13 }
rtpRcvrStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of SysUpTime at the time that this row was
created."
::= { rtpRcvrEntry 14 }
--
-- MODULE GROUPS
--
--
-- There are two types of RTP Systems, RTP hosts and RTP Monitors.
-- Thus there are three kinds of objects: 1) Objects common to both
-- kinds of systems, 2) Objects unique to RTP Hosts and 3) Objects
-- unique to RTP Monitors. There is a fourth group, 4) Objects that
-- SHOULD be implemented by Multicast hosts and RTP Monitors
rtpGroups OBJECT IDENTIFIER ::= { rtpConformance 1 }
rtpSystemGroup OBJECT-GROUP
OBJECTS {
rtpSessionDomain,
rtpSessionRemAddr,
rtpSessionIfIndex,
rtpSessionSenderJoins,
rtpSessionReceiverJoins,
rtpSessionStartTime,
rtpSessionByes,
rtpSessionMonitor,
rtpSenderCNAME,
rtpSenderAddr,
rtpSenderPackets,
rtpSenderOctets,
rtpSenderTool,
rtpSenderSRs,
rtpSenderSRTime,
rtpSenderStartTime,
rtpRcvrCNAME,
rtpRcvrAddr,
rtpRcvrLostPackets,
rtpRcvrJitter,
rtpRcvrTool,
rtpRcvrRRs,
rtpRcvrRRTime,
rtpRcvrStartTime
}
STATUS current
DESCRIPTION
"Objects available to all RTP Systems."
::= { rtpGroups 1 }
rtpHostGroup OBJECT-GROUP
OBJECTS {
rtpSessionLocAddr,
rtpSenderPT,
rtpRcvrPT,
rtpRcvrRTT,
rtpRcvrOctets,
rtpRcvrPackets
}
STATUS current
DESCRIPTION
"Objects that are available to RTP Host systems, but may not
be available to RTP Monitor systems."
::= { rtpGroups 2 }
rtpMonitorGroup OBJECT-GROUP
OBJECTS {
rtpSessionNewIndex,
rtpSessionRowStatus
}
STATUS current
DESCRIPTION
"Objects used to create rows in the RTP Session Table. These
objects are not needed if the system does not create rows."
::= { rtpGroups 3 }
rtpInverseGroup OBJECT-GROUP
OBJECTS {
rtpSessionInverseStartTime,
rtpSenderInverseStartTime,
rtpRcvrInverseStartTime
}
STATUS current
DESCRIPTION
"Objects used in the Inverse Lookup Tables."
::= { rtpGroups 4 }
--
-- Compliance
--
rtpCompliances OBJECT IDENTIFIER ::= { rtpConformance 2 }
rtpHostCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Host implementations MUST comply."
MODULE RTP-MIB
MANDATORY-GROUPS {
rtpSystemGroup,
rtpHostGroup
}
GROUP rtpMonitorGroup
DESCRIPTION
"Host systems my optionally support row creation and deletion.
This would allow an RTP Host system to act as an RTP Monitor."
GROUP rtpInverseGroup
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
OBJECT rtpSessionNewIndex
MIN-ACCESS not-accessible
DESCRIPTION
"RTP system implementations support of
row creation and deletion is OPTIONAL so
implementation of this object is OPTIONAL."
OBJECT rtpSessionDomain
MIN-ACCESS read-only
DESCRIPTION
"RTP system implementation support of
row creation and deletion is OPTIONAL. When
it is not supported so write access is
OPTIONAL."
OBJECT rtpSessionRemAddr
MIN-ACCESS read-only
DESCRIPTION
"Row creation and deletion is OPTIONAL so
read-create access to this object is OPTIONAL."
OBJECT rtpSessionIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Row creation and deletion is OPTIONAL so
read-create access to this object is OPTIONAL."
OBJECT rtpSessionRowStatus
MIN-ACCESS not-accessible
DESCRIPTION
"Row creation and deletion is OPTIONAL so
read-create access to this object is OPTIONAL."
OBJECT rtpSessionInverseStartTime
MIN-ACCESS not-accessible
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
OBJECT rtpSenderInverseStartTime
MIN-ACCESS not-accessible
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
OBJECT rtpRcvrInverseStartTime
MIN-ACCESS not-accessible
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
::= { rtpCompliances 1 }
rtpMonitorCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Monitor implementations must comply. RTP Monitors are not
required to support creation or deletion."
MODULE RTP-MIB
MANDATORY-GROUPS {
rtpSystemGroup,
rtpMonitorGroup
}
GROUP rtpHostGroup
DESCRIPTION
"Monitor implementations may not have access to values in the
rtpHostGroup."
GROUP rtpInverseGroup
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
OBJECT rtpSessionLocAddr
MIN-ACCESS not-accessible
DESCRIPTION
"RTP monitor sourcing of RTP or RTCP data packets
is OPTIONAL and implementation of this object is
OPTIONAL."
OBJECT rtpRcvrPT
MIN-ACCESS not-accessible
DESCRIPTION
"RTP monitor systems may not support
retrieval of the RTP Payload Type from the RTP
header (and may receive RTCP messages only). When
queried for the payload type information"
OBJECT rtpSenderPT
MIN-ACCESS not-accessible
DESCRIPTION
"RTP monitor systems may not support
retrieval of the RTP Payload Type from the RTP
header (and may receive RTCP messages only). When
queried for the payload type information."
OBJECT rtpRcvrOctets
MIN-ACCESS not-accessible
DESCRIPTION
"RTP monitor systems may receive only the RTCP messages
and not the RTP messages that contain the octet count
of the RTP message. Thus implementation of this
object is OPTIONAL"
OBJECT rtpRcvrPackets
MIN-ACCESS not-accessible
DESCRIPTION
"RTP monitor systems may receive only the RTCP messages
and not the RTP messages that contain the octet count
of the RTP message. Thus implementation of this
object is OPTIONAL."
OBJECT rtpSessionIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Row creation and deletion is OPTIONAL so
read-create access to this object is OPTIONAL."
OBJECT rtpSessionInverseStartTime
MIN-ACCESS not-accessible
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
OBJECT rtpSenderInverseStartTime
MIN-ACCESS not-accessible
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
OBJECT rtpRcvrInverseStartTime
MIN-ACCESS not-accessible
DESCRIPTION
"Multicast RTP Systems SHOULD implement the optional
tables."
::= { rtpCompliances 2 }
END
Reference in New Issue Copy Permalink