david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/awplus/AT-PTP-MIB

2734 lines
108 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ============================================================================
-- AT-PTP.MIB, Allied Telesis enterprise MIB:
-- PTP MIB for the AlliedWare Plus(tm) operating system
--
-- Based on ietf-tictoc-ptp-mib draft #11
--
-- ============================================================================
AT-PTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
modules
FROM AT-SMI-MIB
InterfaceIndexOrZero
FROM IF-MIB
OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY,
Gauge32, Unsigned32, Counter32, Counter64, Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, DisplayString, AutonomousType
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF;
atPtpMIB MODULE-IDENTITY
LAST-UPDATED "201701230000Z"
ORGANIZATION
"Allied Telesis, Inc."
CONTACT-INFO
"http://www.alliedtelesis.com"
DESCRIPTION
"This MIB file contains definitions of managed objects for the
IEEE 1588v2 Precision Time Protocol (PTP) module."
REVISION "201701230000Z"
DESCRIPTION
"Initial revision."
::= { modules 504 }
--
-- Textual conventions
--
PtpClockDomainType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The Domain is identified by an integer, the domainNumber, in
the range of 0 to 255. An integer value that is used to assign
each PTP device to a particular domain. The following values
define the valid domains.
Value Definition
--------- -------------------
0 Default domain
1 Alternate domain 1
2 Alternate domain 2
3 Alternate domain 3
4 - 127 User-defined domains
128 - 255 Reserved"
REFERENCE "Section 7.1 Domains, Table 2 of [IEEE 1588-2008]"
SYNTAX Unsigned32 (0..255)
PtpClockIdentity ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The clock Identity is an 8-octet array and will be presented in
the form of a character array. Network byte order is assumed.
The value of the PtpClockIdentity should be taken from the
IEEE EUI-64 individual assigned numbers as indicated in
Section 7.5.2.2.2 of [IEEE 1588-2008]. It can also be non-EUI-64
address as defined in section 7.5.2.2.3 of [IEEE 1588-2008].
The EUI-64 address is divided into the following fields:
OUI bytes (0-2)
Extension identifier bytes (3-7)
The clock identifier can be constructed from existing EUI-48
assignments and here is an abbreviated example extracted from
section 7.5.2.2.2 [IEEE 1588-2008].
Company EUI-48 = 0xACDE4823456716
EUI-64 = ACDE48FFFE23456716
It is important to note the IEEE Registration Authority has
deprecated the use of MAC-48 in any new design."
REFERENCE "Section 7.5.2.2.1 of [IEEE 1588-2008]"
SYNTAX OCTET STRING (SIZE (8))
PtpClockInstanceType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The instance of the Clock of a given clock type in a given
domain."
SYNTAX Unsigned32 (0..255)
PtpClockIntervalBase2 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The interval included in message types Announce, Sync,
Delay_Req, and Pdelay_Req as indicated in section 7.7.2.1 of
[IEEE 1588-2008].
The mean time interval between successive messages shall be
represented as the logarithm to the base 2 of this time
interval measured in seconds on the local clock of the device
sending the message. The values of these logarithmic attributes
shall be selected from integers in the range -128 to 127 subject
to further limits established in an applicable PTP profile."
REFERENCE "Section 7.7.2.1 General interval specification of
[IEEE 1588-2008]"
SYNTAX Integer32 (-128..127)
PtpClockMechanismType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The clock type based on whether end-to-end or peer-to-peer
mechanisms are used. The mechanism used to calculate the Mean
Path Delay as indicated in Table 9 of [IEEE 1588-2008].
Delay mechanism Value(hex) Specification
--------------- ---------- -------------
E2E 01 The port is configured to use the
delay request-response mechanism.
P2P 02 The port is configured to use the
peer delay mechanism.
DISABLED FE The port does not implement the
delay mechanism."
REFERENCE
"Sections 8.2.5.4.4 portDS.delayMechanism,
6.6.4 Measuring link propagation delay in clocks supporting
peer-to-peer path correction,
7.4.2 communication Path asymmetry of [IEEE 1588-2008]."
SYNTAX INTEGER
{
e2e(1),
p2p(2),
disabled(254)
}
PtpClockPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index identifying a specific Precision Time Protocol (PTP)
port on a PTP node."
REFERENCE
"Sections 7.5.2.3 portNumber and 5.3.5 PortIdentity of
[IEEE 1588-2008]"
SYNTAX Unsigned32 (0..65535)
PtpClockPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is the value of the current state of the protocol engine
associated with this port.
Port state Value Description
-----------------------------------------------------------
initializing 1 In this state a port initializes
its data sets, hardware, and
communication facilities.
faulty 2 The fault state of the protocol.
disabled 3 The port shall not place any
messages on its communication path.
listening 4 The port is waiting for the
announceReceiptTimeout to expire or
to receive an Announce message from
a master.
preMaster 5 The port shall behave in all respects
as though it were in the MASTER state
except that it shall not place any
messages on its communication path
except for Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up, signaling, or
management messages.
master 6 The port is behaving as a master port.
passive 7 The port shall not place any messages
on its communication path except for
Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up, or signaling
messages, or management messages that
are a required response to another
management message
uncalibrated 8 The local port is preparing to
synchronize to the master port.
slave 9 The port is synchronizing to the
selected master port."
REFERENCE
"Section 8.2.5.3.1 portState and 9.2.5 State machines of
[IEEE 1588-2008]"
SYNTAX INTEGER
{
initializing(1),
faulty(2),
disabled(3),
listening(4),
preMaster(5),
master(6),
passive(7),
uncalibrated(8),
slave(9)
}
PtpClockPortTransportTypeAddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The Clock port transport protocol address used for this
communication between the clock nodes. This is a string
corresponding to the address type as specified by the
transport type used. The transport types can be defined
elsewhere, in addition to the ones defined in this document.
This can be an address of type IP version 4, IP version 6,
Ethernet, DeviceNET, ControlNET or IEC61158. The OCTET STRING
representation of the OID of ptpWellKnownTransportTypes
will be used in the values contained in the OCTET STRING."
REFERENCE "Annex D (IPv4), Annex E (IPv6), Annex F (Ethernet),
Annex G (DeviceNET), Annex H (ControlNET) and
Annex I (IEC61158) of [IEEE 1588-2008]"
SYNTAX OCTET STRING (SIZE (1..255))
PtpClockProfileType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Clock Profile used. A profile is the set of allowed Precision
Time Protocol (PTP) features applicable to a device."
REFERENCE "Section 3.1.30 profile and 19.3 PTP profiles of
[IEEE 1588-2008]"
SYNTAX INTEGER
{
default(1),
telecom(2),
vendorspecific(3)
}
PtpClockQualityAccuracyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ClockQuality as specified in sections 5.3.7, 7.6.2.5 and
Table 6 of [IEEE 1588-2008].
The following values are not represented in the enumerated
values.
0x01-0x1F Reserved
0x32-0x7F Reserved
It is important to note that section 7.1.1 of [RFC 2578] allows
for gaps and enumerate values starting at zero when indicated by
the protocol."
REFERENCE
"Section 5.3.7 ClockQuality, 7.6.2.5 clockAccuracy and Table 6
clockAccuracy enumeration of [IEEE 1588-2008]"
SYNTAX INTEGER
{
-- reserved00(0:31), 0x00 to 0x1F
nanoSecond25(32), -- 0x20
nanoSecond100(33), -- 0x21
nanoSecond250(34), -- 0x22
microSec1(35), -- 0x23
microSec2dot5(36), -- 0x24
microSec10(37), -- 0x25
microSec25(38), -- 0x26
microSec100(39), -- 0x27
microSec250(40), -- 0x28
milliSec1(41), -- 0x29
milliSec2dot5(42), -- 0x2A
milliSec10(43), -- 0x2B
milliSec25(44), -- 0x2C
milliSec100(45), -- 0x2D
milliSec250(46), -- 0x2E
second1(47), -- 0x2F
second10(48), -- 0x30
secondGreater10(49), -- 0x31
unknown(254) -- 0xFE
-- reserved255(255), 0xFF
}
PtpClockQualityClassType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ClockQuality as specified in section 5.3.7 ClockQuality,
7.6.2.4 clockClass and Table 5 clockClass specifications of
[IEEE 1588-2008].
Value Description
-------- ------------------------------------------------
0 Reserved to enable compatibility with future
versions.
1-5 Reserved
6 Shall designate a clock that is synchronized
to a primary reference time source. The
timescale distributed shall be PTP. A
clockClass 6 clock shall not be a slave to
another clock in the domain.
7 Shall designate a clock that has previously
been designated as clockClass 6 but that has
lost the ability to synchronize to a primary
reference time source and is in holdover mode
and within holdover specifications. The
timescale distributed shall be PTP. A
clockClass 7 clock shall not be a slave to
another clock in the domain.
8 Reserved.
9-10 Reserved to enable compatibility with future
versions.
11-12 Reserved.
13 Shall designate a clock that is synchronized
to an application-specific source of time.
The timescale distributed shall be ARB. A
clockClass 13 clock shall not be a slave to
another clock in the domain.
14 Shall designate a clock that has previously
been designated as clockClass 13 but that
has lost the ability to synchronize to an
application-specific source of time and is
in holdover mode and within holdover
specifications. The timescale distributed
shall be ARB. A clockClass 14 clock shall
not be a slave to another clock in the domain.
15-51 Reserved.
52 Degradation alternative A for a clock of
clockClass 7 that is not within holdover
specification. A clock of clockClass 52
shall not be a slave to another clock in
the domain.
53-57 Reserved.
58 Degradation alternative A for a clock of
clockClass 14 that is not within holdover
specification. A clock of clockClass 58 shall
not be a slave to another clock in the domain.
59-67 Reserved.
68-122 For use by alternate PTP profiles.
123-127 Reserved.
128-132 Reserved.
133-170 For use by alternate PTP profiles.
171-186 Reserved.
187 Degradation alternative B for a clock of
clockClass 7 that is not within holdover
specification. A clock of clockClass 187 may
be a slave to another clock in the domain.
188-192 Reserved.
193 Degradation alternative B for a clock of
clockClass 14 that is not within holdover
specification. A clock of clockClass 193 may
be a slave to another clock in the domain.
194-215 Reserved.
216-232 For use by alternate PTP profiles.
233-247 Reserved.
248 Default. This clockClass shall be used if
none of the other clockClass definitions apply.
249-250 Reserved.
251 Reserved for version 1 compatibility; see Clause 18.
252-254 Reserved.
255 Shall be the clockClass of a slave-only clock; see
9.2.2."
REFERENCE "Section 5.3.7, 7.6.2.4 and Table 5 of
[IEEE 1588-2008]."
SYNTAX INTEGER
{
-- reserved(0), 0x00
-- reserved(1:5), 0x01 to 0x05
clockclass6(6), -- 0x06
clockclass7(7), -- 0x07
-- reserved(8), 0x08
-- reserved(9:10), 0x09 to 0x0A
-- reserved(11:12), 0x0B, 0x0C
clockclass13(13), -- 0x0D
clockclass14(14), -- 0x0E
-- reserved(15:51), 0x0F to 0x33
clockclass52(52), -- 0x34
-- reserved(53:57), 0x35 to 0x39
clockclass58(58) -- 0x3A
-- reserved(59:67), 0x3B to 0x43
-- otherprofiles(68:122), 0x44 to 0x7A
-- reserved(123:127), 0x7B to 0x7F
-- reserved(128:132), 0x80 to 0x84
}
PtpClockRoleType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Clock Role. The protocol generates a Master Slave
relationship among the clocks in the system.
Clock Role Value Description
--------------------------------------------------------------
Master clock 1 A clock that is the source of
time to which all other clocks on
that path synchronize.
Slave clock 2 A clock which synchronizes to
another clock (master)."
SYNTAX INTEGER
{
master(1),
slave(2)
}
PtpClockStateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The clock state returned by a PTP engine.
Clock State Value Description
--------------------------------------------------------------
Freerun state 1 Applies to a slave device that is not
locked to a master. This is the initial
state a slave starts out with when it
is not getting any PTP packets from the
master or because of some other input
error (erroneous packets, etc).
Holdover state 2 In this state the slave device is
locked to a master but communication
with the master has been lost or the
timestamps in the PTP packets are
incorrect. Since the slave was
locked to the master, it can run in this
state, with similar accuracy for some
time. If communication with the master
is not restored for an extended period
(dependent on the clock implementation),
the device should move to the Freerun
state.
Acquiring state 3 The slave device is receiving packets
from a master and is trying to acquire
a lock.
Freq_locked state 4 Slave device is locked to the Master
with respect to frequency, but not phase
aligned
Phase_aligned state 5 Locked to the master with respect to
frequency and phase."
SYNTAX INTEGER
{
freerun(1),
holdover(2),
acquiring(3),
frequencyLocked(4),
phaseAligned(5)
}
PtpClockTimeInterval ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"This textual convention corresponds to the TimeInterval
structure indicated in section 5.3.2 of [IEEE 1588-2008].
It will be presented in the form of a character array.
Network byte order is assumed.
The TimeInterval type represents time intervals.
struct TimeInterval
{
Integer64 scaledNanoseconds;
};
The scaledNanoseconds member is the time interval expressed in
units of nanoseconds and multiplied by 2**16.
Positive or negative time intervals outside the maximum range
of this data type shall be encoded as the largest positive and
negative values of the data type, respectively.
For example, 2.5 ns is expressed as string '0000 0000 0002 8000'
in Base16."
REFERENCE
"Section 5.3.2 TimeInterval and section 7.7.2.1 Timer interval
specification of [IEEE 1588-2008]"
SYNTAX OCTET STRING (SIZE (1..255))
PtpClockTimeSourceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ClockQuality as specified in Sections 5.3.7, 7.6.2.6 and
Table 7 of [IEEE 1588-2008].
The following values are not represented in the enumerated
values.
0xF0-0xFE For use by alternate PTP profiles
0xFF Reserved
It is important to note that section 7.1.1 RFC 2578 allows for
gaps and enumerate values to start with zero when indicated by
the protocol."
REFERENCE "Section 5.3.7, 7.6.2.6 and Table 7 of
[IEEE 1588-2008]."
SYNTAX INTEGER
{
atomicClock(16), -- 0x10
gps(32), -- 0x20
terrestrialRadio(48), -- 0x22
ptp(64), -- 0x40
ntp(80), -- 0x50
handSet(96), -- 0x60
other(144), -- 0x90
internalOscillator(160) -- 0xA0
}
PtpClockTxModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Transmission mode.
Unicast: Using unicast communication channel.
Multicast: Using Multicast communication channel.
multicast-mix: Using multicast-unicast communication channel"
SYNTAX INTEGER
{
unicast(1),
multicast(2),
multicastmix(3)
}
PtpClockType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The clock types as defined in the MIB module description."
REFERENCE
"Section 6.5.1 PTP device types of [IEEE 1588-2008]."
SYNTAX INTEGER
{
ordinaryClock(1),
boundaryClock(2),
transparentClock(3),
boundaryNode(4)
}
--
-- Node definitions
--
ptpMIBNotifs OBJECT IDENTIFIER ::= { atPtpMIB 0 }
ptpMIBObjects OBJECT IDENTIFIER ::= { atPtpMIB 1 }
ptpMIBConformance OBJECT IDENTIFIER ::= { atPtpMIB 2 }
ptpMIBSystemInfo OBJECT IDENTIFIER ::= { ptpMIBObjects 1 }
ptpMIBClockInfo OBJECT IDENTIFIER ::= { ptpMIBObjects 2 }
ptpSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of count information about the PTP system for all
domains."
::= { ptpMIBSystemInfo 1 }
ptpSystemEntry OBJECT-TYPE
SYNTAX PtpSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing count information about a
single domain. New row entries are added when the PTP clock for
this domain is configured, while the unconfiguration of the PTP
clock removes it."
INDEX {
ptpDomainIndex,
ptpInstanceIndex
}
::= { ptpSystemTable 1 }
PtpSystemEntry ::=
SEQUENCE {
ptpDomainIndex
PtpClockDomainType,
ptpInstanceIndex
PtpClockInstanceType,
ptpDomainClockPortsTotal
Gauge32
}
ptpDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices. The Clock Domain is a logical
group of clocks and devices that synchronize with each other
using the PTP protocol.
0 Default domain
1 Alternate domain 1
2 Alternate domain 2
3 Alternate domain 3
4 - 127 User-defined domains
128 - 255 Reserved"
::= { ptpSystemEntry 1 }
ptpInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the Clock for this
domain."
::= { ptpSystemEntry 2 }
ptpDomainClockPortsTotal OBJECT-TYPE
SYNTAX Gauge32
UNITS "ptp ports"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of clock ports
configured within a domain in the system."
::= { ptpSystemEntry 3 }
ptpSystemDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpSystemDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP system for all clock modes
-- ordinary, boundary or transparent."
::= { ptpMIBSystemInfo 2 }
ptpSystemDomainEntry OBJECT-TYPE
SYNTAX PtpSystemDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
clock mode for the PTP system. A row entry gets added when PTP
clocks are configured on the node."
INDEX {
ptpSystemDomainClockTypeIndex
}
::= { ptpSystemDomainTable 1 }
PtpSystemDomainEntry ::=
SEQUENCE {
ptpSystemDomainClockTypeIndex
PtpClockType,
ptpSystemDomainTotals
Unsigned32
}
ptpSystemDomainClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
Textual convention description."
::= { ptpSystemDomainEntry 1 }
ptpSystemDomainTotals OBJECT-TYPE
SYNTAX Unsigned32
UNITS "domains"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of PTP domains for this
particular clock type configured in this node."
::= { ptpSystemDomainEntry 2 }
ptpSystemProfile OBJECT-TYPE
SYNTAX PtpClockProfileType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP Profile implemented on the
system."
REFERENCE "Section 19.3 PTP profiles of [IEEE 1588-2008]"
::= { ptpMIBSystemInfo 3 }
ptpClockCurrentDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockCurrentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock Current Datasets for
all domains."
::= { ptpMIBClockInfo 1 }
ptpClockCurrentDSEntry OBJECT-TYPE
SYNTAX PtpClockCurrentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
PTP clock Current Datasets for a domain."
REFERENCE
"[IEEE 1588-2008] Section 8.2.2 currentDS data set member
specifications of [IEEE 1588-2008]"
INDEX {
ptpClockCurrentDSDomainIndex,
ptpClockCurrentDSClockTypeIndex,
ptpClockCurrentDSInstanceIndex
}
::= { ptpClockCurrentDSTable 1 }
PtpClockCurrentDSEntry ::=
SEQUENCE {
ptpClockCurrentDSDomainIndex
PtpClockDomainType,
ptpClockCurrentDSClockTypeIndex
PtpClockType,
ptpClockCurrentDSInstanceIndex
PtpClockInstanceType,
ptpClockCurrentDSStepsRemoved
Unsigned32,
ptpClockCurrentDSOffsetFromMaster
PtpClockTimeInterval,
ptpClockCurrentDSMeanPathDelay
PtpClockTimeInterval
}
ptpClockCurrentDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockCurrentDSEntry 1 }
ptpClockCurrentDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
Textual convention description."
::= { ptpClockCurrentDSEntry 2 }
ptpClockCurrentDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockCurrentDSEntry 3 }
ptpClockCurrentDSStepsRemoved OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Steps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current clock dataset StepsRemoved value.
This object specifies the distance measured by the number of
Boundary clocks between the local clock and the Foreign master
as indicated in the stepsRemoved field of Announce messages."
REFERENCE
"Section 8.2.2.2 stepsRemoved of [IEEE 1588-2008]"
::= { ptpClockCurrentDSEntry 4 }
ptpClockCurrentDSOffsetFromMaster OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current clock dataset ClockOffset
value. The value of the computation of the offset in time
between a slave and a master clock."
REFERENCE
"Section 8.2.2.3 currentDS.offsetFromMaster of [IEEE 1588-2008]"
::= { ptpClockCurrentDSEntry 5 }
ptpClockCurrentDSMeanPathDelay OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current clock dataset MeanPathDelay
value.
The mean path delay between a pair of ports as measured by the
delay request-response mechanism."
REFERENCE
"Section 8.2.2.4 currentDS.meanPathDelay of [IEEE 1588-2008]"
::= { ptpClockCurrentDSEntry 6 }
ptpClockParentDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockParentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock Parent Datasets for
all domains."
::= { ptpMIBClockInfo 2 }
ptpClockParentDSEntry OBJECT-TYPE
SYNTAX PtpClockParentDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
PTP clock Parent Datasets for a domain."
REFERENCE
"Section 8.2.3 parentDS data set member specifications of
[IEEE 1588-2008]"
INDEX {
ptpClockParentDSDomainIndex,
ptpClockParentDSClockTypeIndex,
ptpClockParentDSInstanceIndex
}
::= { ptpClockParentDSTable 1 }
PtpClockParentDSEntry ::=
SEQUENCE {
ptpClockParentDSDomainIndex
PtpClockDomainType,
ptpClockParentDSClockTypeIndex
PtpClockType,
ptpClockParentDSInstanceIndex
PtpClockInstanceType,
ptpClockParentDSParentPortIdentity
OCTET STRING,
ptpClockParentDSParentStats
TruthValue,
ptpClockParentDSOffset
PtpClockIntervalBase2,
ptpClockParentDSClockPhChRate
Integer32,
ptpClockParentDSGMClockIdentity
PtpClockIdentity,
ptpClockParentDSGMClockPriority1
Unsigned32,
ptpClockParentDSGMClockPriority2
Unsigned32,
ptpClockParentDSGMClockQualityClass
PtpClockQualityClassType,
ptpClockParentDSGMClockQualityAccuracy
PtpClockQualityAccuracyType,
ptpClockParentDSGMClockQualityOffset
Unsigned32
}
ptpClockParentDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockParentDSEntry 1 }
ptpClockParentDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
Textual convention description."
::= { ptpClockParentDSEntry 2 }
ptpClockParentDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockParentDSEntry 3 }
ptpClockParentDSParentPortIdentity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of portIdentity of the port on
the master that issues the Sync messages used in synchronizing
this clock."
REFERENCE
"Section 8.2.3.2 parentDS.parentPortIdentity of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 4 }
ptpClockParentDSParentStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Parent Dataset ParentStats value.
This value indicates whether the values of ParentDSOffset
and ParentDSClockPhChRate have been measured and are valid.
A TRUE value shall indicate valid data."
REFERENCE
"Section 8.2.3.3 parentDS.parentStats of [IEEE 1588-2008]"
::= { ptpClockParentDSEntry 5 }
ptpClockParentDSOffset OBJECT-TYPE
SYNTAX PtpClockIntervalBase2 (-128..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Parent Dataset
ParentOffsetScaledLogVariance value.
This value is the variance of the parent clock's phase as
measured by the local clock."
REFERENCE
"Section 8.2.3.4
parentDS.observedParentOffsetScaledLogVariance
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 6 }
ptpClockParentDSClockPhChRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock's parent dataset
ParentClockPhaseChangeRate value.
This value is an estimate of the parent clock's phase change
rate as measured by the slave clock."
REFERENCE
"Section 8.2.3.5
parentDS.observedParentClockPhaseChangeRate of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 7 }
ptpClockParentDSGMClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parent dataset Grandmaster clock
identity."
REFERENCE
"Section 8.2.3.6 parentDS.grandmasterIdentity of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 8 }
ptpClockParentDSGMClockPriority1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parent dataset Grandmaster clock
priority1."
REFERENCE
"Section 8.2.3.8 parentDS.grandmasterPriority1 of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 9 }
ptpClockParentDSGMClockPriority2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parent dataset grandmaster clock
priority2."
REFERENCE
"Section 8.2.3.9 parentDS.grandmasterPriority2 of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 10 }
ptpClockParentDSGMClockQualityClass OBJECT-TYPE
SYNTAX PtpClockQualityClassType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parent dataset grandmaster clock
quality class."
REFERENCE
"Section 8.2.3.7 parentDS.grandmasterClockQuality of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 11 }
ptpClockParentDSGMClockQualityAccuracy OBJECT-TYPE
SYNTAX PtpClockQualityAccuracyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parent dataset grandmaster clock
quality accuracy."
REFERENCE
"Section 8.2.3.7 parentDS.grandmasterClockQuality of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 12 }
ptpClockParentDSGMClockQualityOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the parent dataset grandmaster clock
quality offset."
REFERENCE
"Section 8.2.3.7 parentDS.grandmasterClockQuality of
[IEEE 1588-2008]"
::= { ptpClockParentDSEntry 13 }
ptpClockDefaultDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock Default Datasets for
all domains."
::= { ptpMIBClockInfo 3 }
ptpClockDefaultDSEntry OBJECT-TYPE
SYNTAX PtpClockDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
PTP clock Default Datasets for a domain."
INDEX {
ptpClockDefaultDSDomainIndex,
ptpClockDefaultDSClockTypeIndex,
ptpClockDefaultDSInstanceIndex
}
::= { ptpClockDefaultDSTable 1 }
PtpClockDefaultDSEntry ::=
SEQUENCE {
ptpClockDefaultDSDomainIndex
PtpClockDomainType,
ptpClockDefaultDSClockTypeIndex
PtpClockType,
ptpClockDefaultDSInstanceIndex
PtpClockInstanceType,
ptpClockDefaultDSTwoStepFlag
TruthValue,
ptpClockDefaultDSClockIdentity
PtpClockIdentity,
ptpClockDefaultDSPriority1
Unsigned32,
ptpClockDefaultDSPriority2
Unsigned32,
ptpClockDefaultDSSlaveOnly
TruthValue,
ptpClockDefaultDSQualityClass
PtpClockQualityClassType,
ptpClockDefaultDSQualityAccuracy
PtpClockQualityAccuracyType,
ptpClockDefaultDSQualityOffset
Integer32
}
ptpClockDefaultDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockDefaultDSEntry 1 }
ptpClockDefaultDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the Textual
convention description."
::= { ptpClockDefaultDSEntry 2 }
ptpClockDefaultDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockDefaultDSEntry 3 }
ptpClockDefaultDSTwoStepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the Two Step process is used."
::= { ptpClockDefaultDSEntry 4 }
ptpClockDefaultDSClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the default Datasets clock identity."
::= { ptpClockDefaultDSEntry 5 }
ptpClockDefaultDSPriority1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the default Datasets clock Priority1."
::= { ptpClockDefaultDSEntry 6 }
ptpClockDefaultDSPriority2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the default Datasets clock Priority2."
::= { ptpClockDefaultDSEntry 7 }
ptpClockDefaultDSSlaveOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the SlaveOnly flag is set."
::= { ptpClockDefaultDSEntry 8 }
ptpClockDefaultDSQualityClass OBJECT-TYPE
SYNTAX PtpClockQualityClassType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the default dataset Quality Class."
::= { ptpClockDefaultDSEntry 9 }
ptpClockDefaultDSQualityAccuracy OBJECT-TYPE
SYNTAX PtpClockQualityAccuracyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the default dataset Quality Accuracy."
::= { ptpClockDefaultDSEntry 10 }
ptpClockDefaultDSQualityOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the default dataset Quality offset."
::= { ptpClockDefaultDSEntry 11 }
ptpClockRunningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock Running Datasets for
all domains."
::= { ptpMIBClockInfo 4 }
ptpClockRunningEntry OBJECT-TYPE
SYNTAX PtpClockRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
PTP clock running Datasets for a domain."
INDEX {
ptpClockRunningDomainIndex,
ptpClockRunningClockTypeIndex,
ptpClockRunningInstanceIndex
}
::= { ptpClockRunningTable 1 }
PtpClockRunningEntry ::=
SEQUENCE {
ptpClockRunningDomainIndex
PtpClockDomainType,
ptpClockRunningClockTypeIndex
PtpClockType,
ptpClockRunningInstanceIndex
PtpClockInstanceType,
ptpClockRunningState
PtpClockStateType,
ptpClockRunningPacketsSent
Counter64,
ptpClockRunningPacketsReceived
Counter64
}
ptpClockRunningDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
Logical group of PTP devices."
::= { ptpClockRunningEntry 1 }
ptpClockRunningClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
Textual convention description."
::= { ptpClockRunningEntry 2 }
ptpClockRunningInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockRunningEntry 3 }
ptpClockRunningState OBJECT-TYPE
SYNTAX PtpClockStateType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Clock state returned by a PTP engine
which was described earlier.
Freerun state. Applies to a slave device that is not locked to
a master. This is the initial state a slave starts out with
when it is not getting any PTP packets from the master, or
because of some other input error (erroneous packets, etc).
Holdover state. In this state the slave device is locked to a
master but communication with the master has been lost or the
timestamps in the PTP packets are incorrect. Since the
slave was previously locked to the master, it can run in this
state, with similar accuracy for some time. If communication
with the master is not restored for an extended period
(dependent on the clock implementation), the device should move
to the FREERUN state.
Acquiring state. The slave device is receiving packets from a
master and is trying to acquire a lock.
Freq_locked state. Slave device is locked to the Master with
respect to frequency, but not phase aligned.
Phase_aligned state. Locked to the master with respect to
frequency and phase."
::= { ptpClockRunningEntry 4 }
ptpClockRunningPacketsSent OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of all unicast and
multicast packets that have been sent out for this clock in this
domain for this type. These counters are discontinuous."
::= { ptpClockRunningEntry 5 }
ptpClockRunningPacketsReceived OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the total number of all unicast and
multicast packets that have been received for this clock in this
domain for this type. These counters are discontinuous."
::= { ptpClockRunningEntry 6 }
ptpClockTimePropertiesDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockTimePropertiesDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP clock time properties
datasets for all domains."
::= { ptpMIBClockInfo 5 }
ptpClockTimePropertiesDSEntry OBJECT-TYPE
SYNTAX PtpClockTimePropertiesDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
PTP clock timeproperties Datasets for a domain."
REFERENCE
"Section 8.2.4 timePropertiesDS data set member specifications
of [IEEE 1588-2008]"
INDEX {
ptpClockTimePropertiesDSDomainIndex,
ptpClockTimePropertiesDSClockTypeIndex,
ptpClockTimePropertiesDSInstanceIndex
}
::= { ptpClockTimePropertiesDSTable 1 }
PtpClockTimePropertiesDSEntry ::=
SEQUENCE {
ptpClockTimePropertiesDSDomainIndex
PtpClockDomainType,
ptpClockTimePropertiesDSClockTypeIndex
PtpClockType,
ptpClockTimePropertiesDSInstanceIndex
PtpClockInstanceType,
ptpClockTimePropertiesDSCurrentUTCOffsetValid
TruthValue,
ptpClockTimePropertiesDSCurrentUTCOffset
Integer32,
ptpClockTimePropertiesDSLeap59
TruthValue,
ptpClockTimePropertiesDSLeap61
TruthValue,
ptpClockTimePropertiesDSTimeTraceable
TruthValue,
ptpClockTimePropertiesDSFreqTraceable
TruthValue,
ptpClockTimePropertiesDSPTPTimescale
TruthValue,
ptpClockTimePropertiesDSSource
PtpClockTimeSourceType
}
ptpClockTimePropertiesDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockTimePropertiesDSEntry 1 }
ptpClockTimePropertiesDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
Textual convention description."
::= { ptpClockTimePropertiesDSEntry 2 }
ptpClockTimePropertiesDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockTimePropertiesDSEntry 3 }
ptpClockTimePropertiesDSCurrentUTCOffsetValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the timeproperties dataset value of
whether the current UTC offset is valid."
REFERENCE
"Section 8.2.4.2 timePropertiesDS.currentUtcOffset of
[IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 4 }
ptpClockTimePropertiesDSCurrentUTCOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the timeproperties dataset value of
the current UTC offset.
In PTP systems whose epoch is the PTP epoch, the value of
timePropertiesDS.currentUtcOffset is the offset between TAI and
UTC; otherwise the value has no meaning. The value shall be in
units of seconds.
The initialization value shall be selected as follows:
a) If the timePropertiesDS.ptpTimescale (see 8.2.4.8) is TRUE,
the value is the value obtained from a primary reference if the
value is known at the time of initialization, else,
b) The value shall be the current number of leap seconds (7.2.3)
when the node is designed."
REFERENCE
"Section 8.2.4.3 timePropertiesDS.currentUtcOffsetValid of
[IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 5 }
ptpClockTimePropertiesDSLeap59 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Leap59 value in the clock Current
Dataset."
REFERENCE
"Section 8.2.4.4 timePropertiesDS.leap59 of [IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 6 }
ptpClockTimePropertiesDSLeap61 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Leap61 value in the clock Current
Dataset."
REFERENCE
"Section 8.2.4.5 timePropertiesDS.leap61 of [IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 7 }
ptpClockTimePropertiesDSTimeTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Time Traceable value in the clock
Current Dataset."
REFERENCE
"Section 8.2.4.6 timePropertiesDS.timeTraceable of
[IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 8 }
ptpClockTimePropertiesDSFreqTraceable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Frequency Traceable value in the
clock Current Dataset."
REFERENCE
"Section 8.2.4.7 timePropertiesDS.frequencyTraceable of
[IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 9 }
ptpClockTimePropertiesDSPTPTimescale OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP Timescale value in the clock
Current Dataset."
REFERENCE
"Section 8.2.4.8 timePropertiesDS.ptpTimescale of
[IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 10 }
ptpClockTimePropertiesDSSource OBJECT-TYPE
SYNTAX PtpClockTimeSourceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Timesource value in the clock Current
Dataset."
REFERENCE
"Section 8.2.4.9 timePropertiesDS.timeSource of
[IEEE 1588-2008]"
::= { ptpClockTimePropertiesDSEntry 11 }
ptpClockTransDefaultDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockTransDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the PTP Transparent clock Default
Datasets for all domains."
::= { ptpMIBClockInfo 6 }
ptpClockTransDefaultDSEntry OBJECT-TYPE
SYNTAX PtpClockTransDefaultDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
PTP Transparent clock Default Datasets for a domain."
REFERENCE
"Section 8.3.2 transparentClockDefaultDS data set member
specifications of [IEEE 1588-2008]"
INDEX {
ptpClockTransDefaultDSDomainIndex,
ptpClockTransDefaultDSInstanceIndex
}
::= { ptpClockTransDefaultDSTable 1 }
PtpClockTransDefaultDSEntry ::=
SEQUENCE {
ptpClockTransDefaultDSDomainIndex
PtpClockDomainType,
ptpClockTransDefaultDSInstanceIndex
PtpClockInstanceType,
ptpClockTransDefaultDSClockIdentity
PtpClockIdentity,
ptpClockTransDefaultDSNumOfPorts
Counter32,
ptpClockTransDefaultDSDelay
PtpClockMechanismType,
ptpClockTransDefaultDSPrimaryDomain
PtpClockDomainType
}
ptpClockTransDefaultDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockTransDefaultDSEntry 1 }
ptpClockTransDefaultDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockTransDefaultDSEntry 2 }
ptpClockTransDefaultDSClockIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the clockIdentity attribute
of the local clock."
REFERENCE
"Section 8.3.2.2.1 transparentClockDefaultDS.clockIdentity of
[IEEE 1588-2008]"
::= { ptpClockTransDefaultDSEntry 3 }
ptpClockTransDefaultDSNumOfPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of PTP ports of the device.
These counters are discontinuous."
REFERENCE
"Section 8.3.2.2.2 transparentClockDefaultDS.numberPorts of
[IEEE 1588-2008]"
::= { ptpClockTransDefaultDSEntry 4 }
ptpClockTransDefaultDSDelay OBJECT-TYPE
SYNTAX PtpClockMechanismType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, if the transparent clock is an end-to-end
transparent clock, has the value of E2E; if the transparent
clock is a peer-to-peer transparent clock, the value shall be
P2P."
REFERENCE
"Section 8.3.2.3.1 transparentClockDefaultDS.delayMechanism of
[IEEE 1588-2008]"
::= { ptpClockTransDefaultDSEntry 5 }
ptpClockTransDefaultDSPrimaryDomain OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the primary syntonization
domain. The initialization value shall be 0."
REFERENCE
"Section 8.3.2.3.2 transparentClockDefaultDS.primaryDomain of
[IEEE 1588-2008]"
::= { ptpClockTransDefaultDSEntry 6 }
ptpClockPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the clock ports for a particular
domain."
::= { ptpMIBClockInfo 7 }
ptpClockPortEntry OBJECT-TYPE
SYNTAX PtpClockPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
clock port."
INDEX {
ptpClockPortDomainIndex,
ptpClockPortClockTypeIndex,
ptpClockPortClockInstanceIndex,
ptpClockPortTablePortNumberIndex
}
::= { ptpClockPortTable 1 }
PtpClockPortEntry ::=
SEQUENCE {
ptpClockPortDomainIndex
PtpClockDomainType,
ptpClockPortClockTypeIndex
PtpClockType,
ptpClockPortClockInstanceIndex
PtpClockInstanceType,
ptpClockPortTablePortNumberIndex
PtpClockPortNumber,
ptpClockPortName
DisplayString,
ptpClockPortRole
PtpClockRoleType,
ptpClockPortSyncTwoStep
TruthValue,
ptpClockPortCurrentPeerAddressType
AutonomousType,
ptpClockPortCurrentPeerAddress
PtpClockPortTransportTypeAddress,
ptpClockPortNumOfAssociatedPorts
Gauge32
}
ptpClockPortDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockPortEntry 1 }
ptpClockPortClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the Textual
convention description."
::= { ptpClockPortEntry 2 }
ptpClockPortClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockPortEntry 3 }
ptpClockPortTablePortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP Portnumber for this port."
::= { ptpClockPortEntry 4 }
ptpClockPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port name configured on the
node."
::= { ptpClockPortEntry 5 }
ptpClockPortRole OBJECT-TYPE
SYNTAX PtpClockRoleType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the current role (slave/master) of the
port."
::= { ptpClockPortEntry 6 }
ptpClockPortSyncTwoStep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies that two-step clock operation between
the PTP master and slave device is enabled."
::= { ptpClockPortEntry 7 }
ptpClockPortCurrentPeerAddressType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current peer's network address type
used for PTP communication."
::= { ptpClockPortEntry 8 }
ptpClockPortCurrentPeerAddress OBJECT-TYPE
SYNTAX PtpClockPortTransportTypeAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the current peer's network address used
for PTP communication."
::= { ptpClockPortEntry 9 }
ptpClockPortNumOfAssociatedPorts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies -
For a master port - the number of PTP slave sessions (peers)
associated with this PTP port.
For a slave port - the number of masters available to this slave
port (might or might not be peered)."
::= { ptpClockPortEntry 10 }
ptpClockPortDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockPortDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the clock ports dataset for a
particular domain."
::= { ptpMIBClockInfo 8 }
ptpClockPortDSEntry OBJECT-TYPE
SYNTAX PtpClockPortDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing port dataset information for
a single clock port."
INDEX {
ptpClockPortDSDomainIndex,
ptpClockPortDSClockTypeIndex,
ptpClockPortDSClockInstanceIndex,
ptpClockPortDSPortNumberIndex
}
::= { ptpClockPortDSTable 1 }
PtpClockPortDSEntry ::=
SEQUENCE {
ptpClockPortDSDomainIndex
PtpClockDomainType,
ptpClockPortDSClockTypeIndex
PtpClockType,
ptpClockPortDSClockInstanceIndex
PtpClockInstanceType,
ptpClockPortDSPortNumberIndex
PtpClockPortNumber,
ptpClockPortDSName
DisplayString,
ptpClockPortDSPortIdentity
OCTET STRING,
ptpClockPortDSlogAnnouncementInterval
PtpClockIntervalBase2,
ptpClockPortDSAnnounceRctTimeout
Integer32,
ptpClockPortDSlogSyncInterval
PtpClockIntervalBase2,
ptpClockPortDSMinDelayReqInterval
Integer32,
ptpClockPortDSPeerDelayReqInterval
Integer32,
ptpClockPortDSDelayMech
PtpClockMechanismType,
ptpClockPortDSPeerMeanPathDelay
PtpClockTimeInterval,
ptpClockPortDSGrantDuration
Unsigned32,
ptpClockPortDSPTPVersion
Unsigned32
}
ptpClockPortDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockPortDSEntry 1 }
ptpClockPortDSClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the
Textual convention description."
::= { ptpClockPortDSEntry 2 }
ptpClockPortDSClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockPortDSEntry 3 }
ptpClockPortDSPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portnumber associated with this
PTP port."
::= { ptpClockPortDSEntry 4 }
ptpClockPortDSName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port dataset name."
::= { ptpClockPortDSEntry 5 }
ptpClockPortDSPortIdentity OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port Identity."
::= { ptpClockPortDSEntry 6 }
ptpClockPortDSlogAnnouncementInterval OBJECT-TYPE
SYNTAX PtpClockIntervalBase2
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Announce message transmission
interval associated with this clock port."
::= { ptpClockPortDSEntry 7 }
ptpClockPortDSAnnounceRctTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Announce receipt timeout associated
with this clock port."
::= { ptpClockPortDSEntry 8 }
ptpClockPortDSlogSyncInterval OBJECT-TYPE
SYNTAX PtpClockIntervalBase2
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Sync message transmission interval."
::= { ptpClockPortDSEntry 9 }
ptpClockPortDSMinDelayReqInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Delay_Req message transmission
interval."
::= { ptpClockPortDSEntry 10 }
ptpClockPortDSPeerDelayReqInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Pdelay_Req message transmission
interval."
::= { ptpClockPortDSEntry 11 }
ptpClockPortDSDelayMech OBJECT-TYPE
SYNTAX PtpClockMechanismType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the delay mechanism used. If the clock
is an end-to-end clock, the value of the is e2e, else if the
clock is a peer to-peer clock, the value shall be p2p."
::= { ptpClockPortDSEntry 12 }
ptpClockPortDSPeerMeanPathDelay OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peer meanPathDelay."
::= { ptpClockPortDSEntry 13 }
ptpClockPortDSGrantDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the grant duration allocated by the
master."
::= { ptpClockPortDSEntry 14 }
ptpClockPortDSPTPVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP version being used."
::= { ptpClockPortDSEntry 15 }
ptpClockPortRunningTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockPortRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the clock ports running datasets for
a particular domain."
::= { ptpMIBClockInfo 9 }
ptpClockPortRunningEntry OBJECT-TYPE
SYNTAX PtpClockPortRunningEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing running dataset information
about a single clock port."
INDEX {
ptpClockPortRunningDomainIndex,
ptpClockPortRunningClockTypeIndex,
ptpClockPortRunningClockInstanceIndex,
ptpClockPortRunningPortNumberIndex
}
::= { ptpClockPortRunningTable 1 }
PtpClockPortRunningEntry ::=
SEQUENCE {
ptpClockPortRunningDomainIndex
PtpClockDomainType,
ptpClockPortRunningClockTypeIndex
PtpClockType,
ptpClockPortRunningClockInstanceIndex
PtpClockInstanceType,
ptpClockPortRunningPortNumberIndex
PtpClockPortNumber,
ptpClockPortRunningName
DisplayString,
ptpClockPortRunningState
PtpClockPortState,
ptpClockPortRunningRole
PtpClockRoleType,
ptpClockPortRunningInterfaceIndex
InterfaceIndexOrZero,
ptpClockPortRunningTransport
AutonomousType,
ptpClockPortRunningEncapsulationType
AutonomousType,
ptpClockPortRunningTxMode
PtpClockTxModeType,
ptpClockPortRunningRxMode
PtpClockTxModeType,
ptpClockPortRunningPacketsReceived
Counter64,
ptpClockPortRunningPacketsSent
Counter64
}
ptpClockPortRunningDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
logical group of PTP devices."
::= { ptpClockPortRunningEntry 1 }
ptpClockPortRunningClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the clock type as defined in the Textual
convention description."
::= { ptpClockPortRunningEntry 2 }
ptpClockPortRunningClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockPortRunningEntry 3 }
ptpClockPortRunningPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP portnumber associated with this
clock port."
::= { ptpClockPortRunningEntry 4 }
ptpClockPortRunningName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the PTP clock port name."
::= { ptpClockPortRunningEntry 5 }
ptpClockPortRunningState OBJECT-TYPE
SYNTAX PtpClockPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the port state returned by PTP engine.
initializing - In this state a port initializes
its data sets, hardware, and
communication facilities.
faulty - The fault state of the protocol.
disabled - The port shall not place any
messages on its communication path.
listening - The port is waiting for the
announceReceiptTimeout to expire or
to receive an Announce message from
a master.
preMaster - The port shall behave in all respects
as though it were in the MASTER state
except that it shall not place any
messages on its communication path
except for Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up, signaling, or
management messages.
master - The port is behaving as a master port.
passive - The port shall not place any
messages on its communication path
except for Pdelay_Req, Pdelay_Resp,
Pdelay_Resp_Follow_Up, or signaling
messages, or management messages
that are a required response to
another management message
uncalibrated - The local port is preparing to
synchronize to the master port.
slave - The port is synchronizing to the
selected master port."
::= { ptpClockPortRunningEntry 6 }
ptpClockPortRunningRole OBJECT-TYPE
SYNTAX PtpClockRoleType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the Clock Role."
::= { ptpClockPortRunningEntry 7 }
ptpClockPortRunningInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the interface on the node being used by
the PTP Clock for PTP communication."
::= { ptpClockPortRunningEntry 8 }
ptpClockPortRunningTransport OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the transport protocol being used for PTP
communication (the mapping used)."
::= { ptpClockPortRunningEntry 9 }
ptpClockPortRunningEncapsulationType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the type of encapsulation if the
interface is adding extra layers (e.g., VLAN, Pseudowire
encapsulation...) for the PTP messages."
::= { ptpClockPortRunningEntry 10 }
ptpClockPortRunningTxMode OBJECT-TYPE
SYNTAX PtpClockTxModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock transmission mode as
unicast: Using unicast communication channel.
multicast: Using Multicast communication channel.
multicast-mix: Using multicast-unicast communication channel"
::= { ptpClockPortRunningEntry 11 }
ptpClockPortRunningRxMode OBJECT-TYPE
SYNTAX PtpClockTxModeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the clock receive mode as
unicast: Using unicast communication channel.
multicast: Using Multicast communication channel.
multicast-mix: Using multicast-unicast communication channel"
::= { ptpClockPortRunningEntry 12 }
ptpClockPortRunningPacketsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the packets received on the clock port
(cumulative). These counters are discontinuous."
::= { ptpClockPortRunningEntry 13 }
ptpClockPortRunningPacketsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the packets sent on the clock port
(cumulative). These counters are discontinuous."
::= { ptpClockPortRunningEntry 14 }
ptpClockPortTransDSTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockPortTransDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about the Transparent clock ports running
dataset for a particular domain."
::= { ptpMIBClockInfo 10 }
ptpClockPortTransDSEntry OBJECT-TYPE
SYNTAX PtpClockPortTransDSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing clock port Transparent
dataset information about a single clock port"
INDEX {
ptpClockPortTransDSDomainIndex,
ptpClockPortTransDSInstanceIndex,
ptpClockPortTransDSPortNumberIndex
}
::= { ptpClockPortTransDSTable 1 }
PtpClockPortTransDSEntry ::=
SEQUENCE {
ptpClockPortTransDSDomainIndex
PtpClockDomainType,
ptpClockPortTransDSInstanceIndex
PtpClockInstanceType,
ptpClockPortTransDSPortNumberIndex
PtpClockPortNumber,
ptpClockPortTransDSPortIdentity
PtpClockIdentity,
ptpClockPortTransDSlogMinPdelayReqInt
PtpClockIntervalBase2,
ptpClockPortTransDSFaultyFlag
TruthValue,
ptpClockPortTransDSPeerMeanPathDelay
PtpClockTimeInterval
}
ptpClockPortTransDSDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the domain number used to create a
Logical group of PTP devices."
::= { ptpClockPortTransDSEntry 1 }
ptpClockPortTransDSInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockPortTransDSEntry 2 }
ptpClockPortTransDSPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP port number associated with this
port."
REFERENCE "Section 7.5.2 Port Identity of [IEEE 1588-2008]"
::= { ptpClockPortTransDSEntry 3 }
ptpClockPortTransDSPortIdentity OBJECT-TYPE
SYNTAX PtpClockIdentity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the PortIdentity
attribute of the local port."
REFERENCE
"Section 8.3.3.2.1 transparentClockPortDS.portIdentity of
[IEEE 1588-2008]"
::= { ptpClockPortTransDSEntry 4 }
ptpClockPortTransDSlogMinPdelayReqInt OBJECT-TYPE
SYNTAX PtpClockIntervalBase2
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value of the logarithm to the
base 2 of the minPdelayReqInterval."
REFERENCE
"Section 8.3.3.3.1 transparentClockPortDS.logMinPdelayReqInterval
of [IEEE 1588-2008]"
::= { ptpClockPortTransDSEntry 5 }
ptpClockPortTransDSFaultyFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the value TRUE if the port is faulty
and FALSE if the port is operating normally."
REFERENCE
"Section 8.3.3.3.2 transparentClockPortDS.faultyFlag of
[IEEE 1588-2008]"
::= { ptpClockPortTransDSEntry 6 }
ptpClockPortTransDSPeerMeanPathDelay OBJECT-TYPE
SYNTAX PtpClockTimeInterval
UNITS "Time Interval"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies, if the delayMechanism used is P2P, the
value of the estimate of the current one-way propagation delay,
i.e., <meanPathDelay> on the link attached to this port,
computed using the peer delay mechanism. If the value of the
delayMechanism used is E2E, then the value will be zero."
REFERENCE
"Section 8.3.3.3.3 transparentClockPortDS.peerMeanPathDelay of
[IEEE 1588-2008]"
::= { ptpClockPortTransDSEntry 7 }
ptpClockPortAssociateTable OBJECT-TYPE
SYNTAX SEQUENCE OF PtpClockPortAssociateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about a given port's associated ports.
For a master port: multiple slave ports that have established
sessions with the current master port.
For a slave port: the list of masters available for a given
slave port.
Session information (packets, errors) to be displayed based on
availability and scenario."
::= { ptpMIBClockInfo 11 }
ptpWellKnownTransportTypes OBJECT IDENTIFIER ::= { ptpMIBClockInfo 12 }
ptpTransportTypeIPversion4 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"IP version 4"
::= { ptpWellKnownTransportTypes 1 }
ptpTransportTypeIPversion6 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"IP version 6"
::= { ptpWellKnownTransportTypes 2 }
ptpTransportTypeEthernet OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Ethernet"
::= { ptpWellKnownTransportTypes 3 }
ptpTransportTypeDeviceNET OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Device NET"
::= { ptpWellKnownTransportTypes 4 }
ptpTransportTypeControlNET OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Control NET"
::= { ptpWellKnownTransportTypes 5 }
ptpTransportTypeIEC61158 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"IEC61158"
::= { ptpWellKnownTransportTypes 6 }
--
-- Well Known encapsulation types for PTP communication.
--
ptpWellKnownEncapsulationTypes OBJECT IDENTIFIER ::= { ptpMIBClockInfo 13 }
ptpEncapsulationTypeEthernet OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Ethernet Encapsulation type."
::= { ptpWellKnownEncapsulationTypes 1 }
ptpEncapsulationTypeVLAN OBJECT-IDENTITY
STATUS current
DESCRIPTION
"VLAN Encapsulation type."
::= { ptpWellKnownEncapsulationTypes 2 }
ptpEncapsulationTypeUDPIPLSP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"UDP/IP over MPLS Encapsulation type."
::= { ptpWellKnownEncapsulationTypes 3 }
ptpEncapsulationTypePWUDPIPLSP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"UDP/IP Pseudowire over MPLS Encapsulation type."
::= { ptpWellKnownEncapsulationTypes 4 }
ptpEncapsulationTypePWEthernetLSP OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Ethernet Pseudowire over MPLS Encapsulation type."
::= { ptpWellKnownEncapsulationTypes 5 }
ptpClockPortAssociateEntry OBJECT-TYPE
SYNTAX PtpClockPortAssociateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a single
associated port for the given clockport."
INDEX {
ptpClockPortCurrentDomainIndex,
ptpClockPortCurrentClockTypeIndex,
ptpClockPortCurrentClockInstanceIndex,
ptpClockPortCurrentPortNumberIndex,
ptpClockPortAssociatePortIndex
}
::= { ptpClockPortAssociateTable 1 }
PtpClockPortAssociateEntry ::=
SEQUENCE {
ptpClockPortCurrentDomainIndex
PtpClockDomainType,
ptpClockPortCurrentClockTypeIndex
PtpClockType,
ptpClockPortCurrentClockInstanceIndex
PtpClockInstanceType,
ptpClockPortCurrentPortNumberIndex
PtpClockPortNumber,
ptpClockPortAssociatePortIndex
Unsigned32,
ptpClockPortAssociateAddressType
AutonomousType,
ptpClockPortAssociateAddress
PtpClockPortTransportTypeAddress,
ptpClockPortAssociatePacketsSent
Counter64,
ptpClockPortAssociatePacketsReceived
Counter64,
ptpClockPortAssociateInErrors
Counter64,
ptpClockPortAssociateOutErrors
Counter64
}
ptpClockPortCurrentDomainIndex OBJECT-TYPE
SYNTAX PtpClockDomainType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the given port's domain number."
::= { ptpClockPortAssociateEntry 1 }
ptpClockPortCurrentClockTypeIndex OBJECT-TYPE
SYNTAX PtpClockType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the given port's clock type."
::= { ptpClockPortAssociateEntry 2 }
ptpClockPortCurrentClockInstanceIndex OBJECT-TYPE
SYNTAX PtpClockInstanceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the instance of the clock for this clock
type in the given domain."
::= { ptpClockPortAssociateEntry 3 }
ptpClockPortCurrentPortNumberIndex OBJECT-TYPE
SYNTAX PtpClockPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the PTP Port Number for the given port."
::= { ptpClockPortAssociateEntry 4 }
ptpClockPortAssociatePortIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the associated port's serial number in
the current port's context."
::= { ptpClockPortAssociateEntry 5 }
ptpClockPortAssociateAddressType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peer port's network address type used
for PTP communication. The OCTET STRING representation of the
OID of ptpWellKnownTransportTypes will be used in the values
contained in the OCTET STRING."
::= { ptpClockPortAssociateEntry 6 }
ptpClockPortAssociateAddress OBJECT-TYPE
SYNTAX PtpClockPortTransportTypeAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the peer port's network address used for
PTP communication."
::= { ptpClockPortAssociateEntry 7 }
ptpClockPortAssociatePacketsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent to this peer port from the current
port. These counters are discontinuous."
::= { ptpClockPortAssociateEntry 8 }
ptpClockPortAssociatePacketsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received from this peer port by the
current port. These counters are discontinuous."
::= { ptpClockPortAssociateEntry 9 }
ptpClockPortAssociateInErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the input errors associated with the
peer port. These counters are discontinuous."
::= { ptpClockPortAssociateEntry 10 }
ptpClockPortAssociateOutErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the output errors associated with the
peer port. These counters are discontinuous."
::= { ptpClockPortAssociateEntry 11 }
--
-- Conformance Information Definition
--
ptpMIBCompliances OBJECT IDENTIFIER ::= { ptpMIBConformance 1 }
ptpMIBGroups OBJECT IDENTIFIER ::= { ptpMIBConformance 2 }
ptpMIBCompliancesSystemInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide system level information of clock
devices. Such devices can only be monitored using this MIB
module.
The Module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS { ptpMIBSystemInfoGroup }
::= { ptpMIBCompliances 1 }
ptpMIBCompliancesClockInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide clock related information.
Such devices can only be monitored using this MIB module.
The Module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
ptpMIBClockCurrentDSGroup,
ptpMIBClockParentDSGroup,
ptpMIBClockDefaultDSGroup,
ptpMIBClockRunningGroup,
ptpMIBClockTimepropertiesGroup
}
::= { ptpMIBCompliances 2 }
ptpMIBCompliancesClockPortInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide clock port related information.
Such devices can only be monitored using this MIB module.
The Module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
ptpMIBClockPortGroup,
ptpMIBClockPortDSGroup,
ptpMIBClockPortRunningGroup,
ptpMIBClockPortAssociateGroup
}
::= { ptpMIBCompliances 3 }
ptpMIBCompliancesTransparentClockInfo MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide read-only support
for PTPBASE-MIB to provide Transparent clock related
information. Such devices can only be monitored using this MIB
module.
The Module is implemented with support for read-only. In other
words, only monitoring is available by implementing this
MODULE-COMPLIANCE."
MODULE -- this module
MANDATORY-GROUPS {
ptpMIBClockTranparentDSGroup,
ptpMIBClockPortTransDSGroup
}
::= { ptpMIBCompliances 4 }
ptpMIBSystemInfoGroup OBJECT-GROUP
OBJECTS {
ptpSystemDomainTotals,
ptpDomainClockPortsTotal,
ptpSystemProfile
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing system-wide
information"
::= { ptpMIBGroups 1 }
ptpMIBClockCurrentDSGroup OBJECT-GROUP
OBJECTS {
ptpClockCurrentDSStepsRemoved,
ptpClockCurrentDSOffsetFromMaster,
ptpClockCurrentDSMeanPathDelay
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP Current Dataset
information"
::= { ptpMIBGroups 2 }
ptpMIBClockParentDSGroup OBJECT-GROUP
OBJECTS {
ptpClockParentDSParentPortIdentity,
ptpClockParentDSParentStats,
ptpClockParentDSOffset,
ptpClockParentDSClockPhChRate,
ptpClockParentDSGMClockIdentity,
ptpClockParentDSGMClockPriority1,
ptpClockParentDSGMClockPriority2,
ptpClockParentDSGMClockQualityClass,
ptpClockParentDSGMClockQualityAccuracy,
ptpClockParentDSGMClockQualityOffset
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP Parent Dataset
information"
::= { ptpMIBGroups 3 }
ptpMIBClockDefaultDSGroup OBJECT-GROUP
OBJECTS {
ptpClockDefaultDSTwoStepFlag,
ptpClockDefaultDSClockIdentity,
ptpClockDefaultDSPriority1,
ptpClockDefaultDSPriority2,
ptpClockDefaultDSSlaveOnly,
ptpClockDefaultDSQualityClass,
ptpClockDefaultDSQualityAccuracy,
ptpClockDefaultDSQualityOffset
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP Default Dataset
information"
::= { ptpMIBGroups 4 }
ptpMIBClockRunningGroup OBJECT-GROUP
OBJECTS {
ptpClockRunningState,
ptpClockRunningPacketsSent,
ptpClockRunningPacketsReceived
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP running state
information"
::= { ptpMIBGroups 5 }
ptpMIBClockTimepropertiesGroup OBJECT-GROUP
OBJECTS {
ptpClockTimePropertiesDSCurrentUTCOffsetValid,
ptpClockTimePropertiesDSCurrentUTCOffset,
ptpClockTimePropertiesDSLeap59,
ptpClockTimePropertiesDSLeap61,
ptpClockTimePropertiesDSTimeTraceable,
ptpClockTimePropertiesDSFreqTraceable,
ptpClockTimePropertiesDSPTPTimescale,
ptpClockTimePropertiesDSSource
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP Time Properties
information"
::= { ptpMIBGroups 6 }
ptpMIBClockTranparentDSGroup OBJECT-GROUP
OBJECTS {
ptpClockTransDefaultDSClockIdentity,
ptpClockTransDefaultDSNumOfPorts,
ptpClockTransDefaultDSDelay,
ptpClockTransDefaultDSPrimaryDomain
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP Transparent
Dataset information"
::= { ptpMIBGroups 7 }
ptpMIBClockPortGroup OBJECT-GROUP
OBJECTS {
ptpClockPortName,
ptpClockPortSyncTwoStep,
ptpClockPortCurrentPeerAddress,
ptpClockPortNumOfAssociatedPorts,
ptpClockPortCurrentPeerAddressType,
ptpClockPortRole
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing information for a
given PTP Port."
::= { ptpMIBGroups 8 }
ptpMIBClockPortDSGroup OBJECT-GROUP
OBJECTS {
ptpClockPortDSName,
ptpClockPortDSPortIdentity,
ptpClockPortDSlogAnnouncementInterval,
ptpClockPortDSAnnounceRctTimeout,
ptpClockPortDSlogSyncInterval,
ptpClockPortDSMinDelayReqInterval,
ptpClockPortDSPeerDelayReqInterval,
ptpClockPortDSDelayMech,
ptpClockPortDSPeerMeanPathDelay,
ptpClockPortDSGrantDuration,
ptpClockPortDSPTPVersion
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP Port Dataset
information"
::= { ptpMIBGroups 9 }
ptpMIBClockPortRunningGroup OBJECT-GROUP
OBJECTS {
ptpClockPortRunningName,
ptpClockPortRunningState,
ptpClockPortRunningRole,
ptpClockPortRunningInterfaceIndex,
ptpClockPortRunningTransport,
ptpClockPortRunningEncapsulationType,
ptpClockPortRunningTxMode,
ptpClockPortRunningRxMode,
ptpClockPortRunningPacketsReceived,
ptpClockPortRunningPacketsSent
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP running interface
information"
::= { ptpMIBGroups 10 }
ptpMIBClockPortTransDSGroup OBJECT-GROUP
OBJECTS {
ptpClockPortTransDSPortIdentity,
ptpClockPortTransDSlogMinPdelayReqInt,
ptpClockPortTransDSFaultyFlag,
ptpClockPortTransDSPeerMeanPathDelay
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing PTP TransparentDS
information"
::= { ptpMIBGroups 11 }
ptpMIBClockPortAssociateGroup OBJECT-GROUP
OBJECTS {
ptpClockPortAssociatePacketsSent,
ptpClockPortAssociatePacketsReceived,
ptpClockPortAssociateAddress,
ptpClockPortAssociateAddressType,
ptpClockPortAssociateInErrors,
ptpClockPortAssociateOutErrors
}
STATUS current
DESCRIPTION
"Group which aggregates objects describing information on peer
PTP ports for a given PTP clock-port."
::= { ptpMIBGroups 12 }
END
--
-- at-ptp.mib
--
Reference in New Issue Copy Permalink