mibs/MIBS/barco/BARCO-CLICKSHARE-MIB

BARCO-CLICKSHARE-MIB DEFINITIONS ::= BEGIN

IMPORTS
    enterprises,
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Unsigned32
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    OBJECT-GROUP,
    NOTIFICATION-GROUP,
    MODULE-COMPLIANCE
        FROM SNMPv2-CONF;

clickShare MODULE-IDENTITY
    LAST-UPDATED "201812040900Z"    -- Dec 4, 2018 9:00:00 AM
    ORGANIZATION "Barco ClickShare"
    CONTACT-INFO "Barco ClickShare
                  Beneluxpark 21
                  8500  Kortrijk 
                  BELGIUM
                  Phone: +3256233211
                  Email: clickshare@barco.com"
    DESCRIPTION
        "This MIB module defines a set of event triggers and actions for network management of ClickShare devices"
    REVISION "201812040900Z"    -- Dec 4, 2018 9:00:00 AM
    DESCRIPTION
        "Initial version."
    ::= { enterprises 7312 2468 }

--
-- Barco ClickShare subtree identifiers
--
barco      OBJECT IDENTIFIER ::= { enterprises 7312 }
events     OBJECT IDENTIFIER ::= { clickShare 0 }
baseUnit   OBJECT IDENTIFIER ::= { clickShare 1 }
deviceInfo OBJECT IDENTIFIER ::= { baseUnit 1 }
sensors    OBJECT IDENTIFIER ::= { baseUnit 2 }

--
-- Events (SNMP Traps)
--
alarmCpuTemperature NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION "An alarmCpuTemperature trap idicates that the CPU temperature exceeded the threshold."
    ::= { events 1 }

alarmCaseFanSpeed NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION "An alarmCaseFanSpeed trap idicates that the case fan is spinning too slow."
    ::= { events 2 }

alarmProcessNotRunning NOTIFICATION-TYPE
    STATUS      current
    DESCRIPTION "An alarmProcessNotRunning trap idicates that one of the monitored processes is not running."
    ::= { events 3 }

--
-- Device Info
--
diRoomName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Name of the meeting room where the Base Unit is located.
                 This string will be visible on the Base Unit's screen."
    ::= { deviceInfo 1 }

diWelcomeMessage OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "A welcome message visible on the Base Unit's screen."
    ::= { deviceInfo 2 }

diLocation OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Name of the location where the Base Unit is located."
    ::= { deviceInfo 3 }

diArticleCode OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The Base Unit article code."
    ::= { deviceInfo 4 }

diSerialNumber OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The Base Unit serial number."
    ::= { deviceInfo 5 }

diUptime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The Base Unit current uptime."
    ::= { deviceInfo 6 }

diTotalUptime OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The Base Unit total uptime."
    ::= { deviceInfo 7 }

--
-- Sensors
--
sensorCaseFanSpeed OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Indicates the current speed of the case fan."
    ::= { sensors 1 }

sensorCpuFanSpeed OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Indicates the current speed of the CPU fan."
    ::= { sensors 2 }

sensorCpuTemperature OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Indicates the current CPU temperature."
    ::= { sensors 3 }

sensorCpuTemperatureThreshold OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The CPU temperature limit.
                 If the current temperature exceeds this setting, the Base Unit will
                 shut down itself"
    ::= { sensors 4 }

--
-- Conformance Information
--
clickShareMIB OBJECT IDENTIFIER ::= { barco 2469 }

clickShareMIBCompliances OBJECT IDENTIFIER ::= { clickShareMIB 1 }
clickShareMIBGroups      OBJECT IDENTIFIER ::= { clickShareMIB 2 }

-- compliance statements
clickShareMIBCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION "The compliance statement for ClickShare Base Unit devices."

    MODULE      -- this module

    MANDATORY-GROUPS {
            deviceInfoGroup,
            sensorsGroup,
            eventsGroup }
    ::= { clickShareMIBCompliances 1 }

deviceInfoGroup OBJECT-GROUP
    OBJECTS     { diRoomName, diWelcomeMessage, diLocation, diArticleCode, diSerialNumber, diUptime, diTotalUptime }
    STATUS       current
    DESCRIPTION "The group of Device Info objects."
    ::= { clickShareMIBGroups 1 }

sensorsGroup OBJECT-GROUP
    OBJECTS     { sensorCaseFanSpeed, sensorCpuFanSpeed, sensorCpuTemperature, sensorCpuTemperatureThreshold }
    STATUS      current
    DESCRIPTION "The group of sensor objects."
    ::= { clickShareMIBGroups 2 }

eventsGroup NOTIFICATION-GROUP
    NOTIFICATIONS { alarmCpuTemperature, alarmCaseFanSpeed, alarmProcessNotRunning }
    STATUS        current
    DESCRIPTION   "The group of SNMP trap objects."
    ::= { clickShareMIBGroups 99 }
END