512 lines
16 KiB
Plaintext
512 lines
16 KiB
Plaintext
|
FOUNDRY-SN-CAM-MIB DEFINITIONS ::= BEGIN
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE,
|
||
|
|
Gauge32,
|
||
|
|
Unsigned32
|
||
|
|
FROM SNMPv2-SMI -- [RFC2578]
|
||
|
|
TEXTUAL-CONVENTION
|
||
|
|
FROM SNMPv2-TC -- [RFC2579]
|
||
|
|
platform
|
||
|
|
FROM FOUNDRY-SN-ROOT-MIB;
|
||
|
|
|
||
|
|
snCamMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201006020000Z" -- 04 June 2010
|
||
|
|
ORGANIZATION "Brocade Communications Systems, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Technical Support Center
|
||
|
|
130 Holger Way,
|
||
|
|
San Jose, CA 95134
|
||
|
|
Email: ipsupport@brocade.com
|
||
|
|
Phone: 1-800-752-8061
|
||
|
|
URL: www.brocade.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"The MIB module to describe generic objects for the usage of
|
||
|
|
Content Addressable Memory (CAM).
|
||
|
|
|
||
|
|
Copyright 1996-2010 Brocade Communications Systems, Inc.
|
||
|
|
All rights reserved.
|
||
|
|
This Brocade Communications Systems SNMP Management Information Base Specification
|
||
|
|
embodies Brocade Communications Systems' confidential and proprietary
|
||
|
|
intellectual property. Brocade Communications Systems retains all
|
||
|
|
title and ownership in the Specification, including any revisions.
|
||
|
|
|
||
|
|
This Specification is supplied AS IS, and Brocade Communications Systems makes
|
||
|
|
no warranty, either express or implied, as to the use,
|
||
|
|
operation, condition, or performance of the specification, and any unintended
|
||
|
|
consequence it may on the user environment."
|
||
|
|
|
||
|
|
REVISION "201006020000Z" -- 04 June 2010
|
||
|
|
DESCRIPTION
|
||
|
|
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
|
||
|
|
|
||
|
|
REVISION "200711190000Z" -- Nov 19, 2007
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial revision"
|
||
|
|
::= { platform 1 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Textual Conventions
|
||
|
|
--
|
||
|
|
|
||
|
|
-- Percentage
|
||
|
|
--
|
||
|
|
Percent ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An integer that is in the range of a percent value."
|
||
|
|
SYNTAX Gauge32 (0..100)
|
||
|
|
|
||
|
|
--
|
||
|
|
-- high level object identifiers
|
||
|
|
--
|
||
|
|
snCamObjects OBJECT IDENTIFIER ::= { snCamMIB 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- snCamProfile
|
||
|
|
snCamProfile OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
default(1),
|
||
|
|
ipv4(2),
|
||
|
|
ipv4Ipv6(3),
|
||
|
|
ipv4Ipv62(4),
|
||
|
|
ipv4Vpls(5),
|
||
|
|
ipv4Vpn(6),
|
||
|
|
ipv6(7),
|
||
|
|
l2Metro(8),
|
||
|
|
l2Metro2(9),
|
||
|
|
mplsL3vpn(10),
|
||
|
|
mplsL3vpn2(11),
|
||
|
|
mplsVpls(12),
|
||
|
|
mplsVpls2(13),
|
||
|
|
mplsVpnVpls(14),
|
||
|
|
multiService(15),
|
||
|
|
multiService2(16),
|
||
|
|
multiService3(17),
|
||
|
|
multiService4(18)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies CAM partition profile. Each profile
|
||
|
|
adjusts the partitions to optimize the device for corresponding
|
||
|
|
applications."
|
||
|
|
::= { snCamObjects 1 }
|
||
|
|
|
||
|
|
|
||
|
|
-- cam usage objects
|
||
|
|
snCamUsage OBJECT IDENTIFIER ::= { snCamObjects 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- the snCamUsageL3 table
|
||
|
|
|
||
|
|
-- The snCamUsageL3 table contains information of the entity's
|
||
|
|
-- CAM usage for layer 3 traffic.
|
||
|
|
|
||
|
|
snCamUsageL3Table OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnCamUsageL3Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of snCamUsageL3 entries. This table contains
|
||
|
|
information of the entity's CAM usage for layer 3 traffic."
|
||
|
|
::= { snCamUsage 1 }
|
||
|
|
|
||
|
|
snCamUsageL3Entry OBJECT-TYPE
|
||
|
|
SYNTAX SnCamUsageL3Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry containing management information applicable to
|
||
|
|
CAM usage for layer 3 traffic"
|
||
|
|
INDEX { snCamUsageL3Slot,
|
||
|
|
snCamUsageL3Processor,
|
||
|
|
snCamUsageL3Type,
|
||
|
|
snCamUsageL3Supernet }
|
||
|
|
::= { snCamUsageL3Table 1 }
|
||
|
|
|
||
|
|
SnCamUsageL3Entry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
snCamUsageL3Slot Unsigned32,
|
||
|
|
snCamUsageL3Processor Unsigned32,
|
||
|
|
snCamUsageL3Type INTEGER,
|
||
|
|
snCamUsageL3Supernet Unsigned32,
|
||
|
|
snCamUsageL3Size Unsigned32,
|
||
|
|
snCamUsageL3Free Gauge32,
|
||
|
|
snCamUsageL3UsedPercent Percent
|
||
|
|
}
|
||
|
|
|
||
|
|
snCamUsageL3Slot OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies a linecard in the device"
|
||
|
|
::= { snCamUsageL3Entry 1 }
|
||
|
|
|
||
|
|
snCamUsageL3Processor OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..2)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies the network processor within a
|
||
|
|
linecard in the device"
|
||
|
|
::= { snCamUsageL3Entry 2 }
|
||
|
|
|
||
|
|
snCamUsageL3Type OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ipv4(1),
|
||
|
|
ipv6(2),
|
||
|
|
ipv4vpn(3),
|
||
|
|
ipv6vpn(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the type of layer 3 traffic passing through the
|
||
|
|
network processor."
|
||
|
|
::= { snCamUsageL3Entry 3 }
|
||
|
|
|
||
|
|
snCamUsageL3Supernet OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the Supernet for the layer 3 type traffic. It
|
||
|
|
provides information for longest match lookup. For example, zero
|
||
|
|
indicates all the bits of IP address will be matched, and one indicates
|
||
|
|
all but the lowest bit in IP address will be matched. The range is
|
||
|
|
[0..32] for IPv4 and IPv4VPN, where a value of 32 indicates the entry is
|
||
|
|
the total of other supernets indexed by [0..31]. The range is [0..10] for
|
||
|
|
IPv6, where a value of 10 indicates the entry is the total of other
|
||
|
|
supernets indexed by [0..9]."
|
||
|
|
::= { snCamUsageL3Entry 4 }
|
||
|
|
|
||
|
|
snCamUsageL3Size OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The effective CAM size for this layer 3 traffic entry. For ipv4 traffic, each
|
||
|
|
unit is 4 bytes. For ipv4vpn, each unit is 8 bytes. For ipv6, each unit is
|
||
|
|
16 bytes."
|
||
|
|
::= { snCamUsageL3Entry 5 }
|
||
|
|
|
||
|
|
snCamUsageL3Free OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of CAM currently available for this layer 3 traffic entry. For ipv4
|
||
|
|
traffic, each unit is 4 bytes. For ipv4vpn, each unit is 8 bytes. For ipv6, each
|
||
|
|
unit is 16 bytes."
|
||
|
|
::= { snCamUsageL3Entry 6 }
|
||
|
|
|
||
|
|
snCamUsageL3UsedPercent OBJECT-TYPE
|
||
|
|
SYNTAX Percent
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The percentage of CAM currently being used for this layer 3 traffic entry. "
|
||
|
|
::= { snCamUsageL3Entry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
-- the snCamUsageL2 table
|
||
|
|
|
||
|
|
-- The snCamUsageL2 table contains information of the entity's
|
||
|
|
-- CAM usage for layer 2 traffic.
|
||
|
|
|
||
|
|
snCamUsageL2Table OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnCamUsageL2Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of snCamUsageL2 entries. This table contains information of
|
||
|
|
the entity's CAM usage for layer 2 traffic."
|
||
|
|
::= { snCamUsage 2 }
|
||
|
|
|
||
|
|
snCamUsageL2Entry OBJECT-TYPE
|
||
|
|
SYNTAX SnCamUsageL2Entry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry containing management information applicable to
|
||
|
|
CAM usage for layer 2 traffic"
|
||
|
|
INDEX { snCamUsageL2Slot,
|
||
|
|
snCamUsageL2Processor,
|
||
|
|
snCamUsageL2Type }
|
||
|
|
::= { snCamUsageL2Table 1 }
|
||
|
|
|
||
|
|
SnCamUsageL2Entry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
snCamUsageL2Slot Unsigned32,
|
||
|
|
snCamUsageL2Processor Unsigned32,
|
||
|
|
snCamUsageL2Type INTEGER,
|
||
|
|
snCamUsageL2Size Unsigned32,
|
||
|
|
snCamUsageL2Free Gauge32,
|
||
|
|
snCamUsageL2UsedPercent Percent
|
||
|
|
}
|
||
|
|
|
||
|
|
snCamUsageL2Slot OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies a linecard in the device"
|
||
|
|
::= { snCamUsageL2Entry 1 }
|
||
|
|
|
||
|
|
snCamUsageL2Processor OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..2)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies the network processor within a
|
||
|
|
linecard in the device"
|
||
|
|
::= { snCamUsageL2Entry 2 }
|
||
|
|
|
||
|
|
snCamUsageL2Type OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
forwarding(1),
|
||
|
|
protocol(2),
|
||
|
|
flooding(3),
|
||
|
|
total(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the type of layer 2 traffic passing through
|
||
|
|
the network processor."
|
||
|
|
::= { snCamUsageL2Entry 3 }
|
||
|
|
|
||
|
|
snCamUsageL2Size OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The effective CAM size for this layer 2 traffic entry. Each unit is 8 bytes."
|
||
|
|
::= { snCamUsageL2Entry 4 }
|
||
|
|
|
||
|
|
snCamUsageL2Free OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of CAM currently available for this layer 2 traffic entry.
|
||
|
|
Each unit is 8 bytes."
|
||
|
|
::= { snCamUsageL2Entry 5 }
|
||
|
|
|
||
|
|
snCamUsageL2UsedPercent OBJECT-TYPE
|
||
|
|
SYNTAX Percent
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The percentage of CAM currently being used for this layer 2 traffic entry. "
|
||
|
|
::= { snCamUsageL2Entry 6 }
|
||
|
|
|
||
|
|
-- the snCamUsageSession table
|
||
|
|
|
||
|
|
-- The snCamUsageSession table contains information of the entity's
|
||
|
|
-- CAM usage for sessions.
|
||
|
|
|
||
|
|
snCamUsageSessionTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnCamUsageSessionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of snCamUsageSession entries. This table contains information
|
||
|
|
of the entitiy's CAM usage for sessions. "
|
||
|
|
::= { snCamUsage 3 }
|
||
|
|
|
||
|
|
snCamUsageSessionEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnCamUsageSessionEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry containing management information applicable to CAM usage
|
||
|
|
for sessions. "
|
||
|
|
INDEX { snCamUsageSessionSlot,
|
||
|
|
snCamUsageSessionProcessor,
|
||
|
|
snCamUsageSessionType }
|
||
|
|
::= { snCamUsageSessionTable 1 }
|
||
|
|
|
||
|
|
SnCamUsageSessionEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
snCamUsageSessionSlot Unsigned32,
|
||
|
|
snCamUsageSessionProcessor Unsigned32,
|
||
|
|
snCamUsageSessionType INTEGER,
|
||
|
|
snCamUsageSessionSize Unsigned32,
|
||
|
|
snCamUsageSessionFree Gauge32,
|
||
|
|
snCamUsageSessionUsedPercent Percent
|
||
|
|
}
|
||
|
|
|
||
|
|
snCamUsageSessionSlot OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies a linecard in the device"
|
||
|
|
::= { snCamUsageSessionEntry 1 }
|
||
|
|
|
||
|
|
snCamUsageSessionProcessor OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..2)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies the network processor within a
|
||
|
|
linecard in the device"
|
||
|
|
::= { snCamUsageSessionEntry 2 }
|
||
|
|
|
||
|
|
snCamUsageSessionType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ipv4Multicast(1),
|
||
|
|
ipv4andMacReceiveAcl(2),
|
||
|
|
ipv4andMacRuleAcl(3),
|
||
|
|
ipv4andMacTotal(4),
|
||
|
|
ipv4andMacOut(5),
|
||
|
|
ipv6Multicast(6),
|
||
|
|
ipv6ReceiveAcl(7),
|
||
|
|
ipv6RuleAcl(8),
|
||
|
|
ipv6Total(9),
|
||
|
|
ipv6Out(10),
|
||
|
|
labelOut(11),
|
||
|
|
ipv4SrcGuardDenial(12),
|
||
|
|
ipv4SrcGuardPermit(13),
|
||
|
|
internalForwardingLookup(14)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the type of sessions."
|
||
|
|
::= { snCamUsageSessionEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
snCamUsageSessionSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The effective CAM size for this session traffic entry. For IPv4 sessions,
|
||
|
|
each unit is 16 bytes. For IPv4 sessions, each unit is 64 bytes."
|
||
|
|
::= { snCamUsageSessionEntry 4 }
|
||
|
|
|
||
|
|
snCamUsageSessionFree OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of CAM currently available this session traffic entry.
|
||
|
|
For IPv4 sessions, each unit is 16 bytes. For IPv4 sessions, each unit is
|
||
|
|
64 bytes."
|
||
|
|
::= { snCamUsageSessionEntry 5 }
|
||
|
|
|
||
|
|
snCamUsageSessionUsedPercent OBJECT-TYPE
|
||
|
|
SYNTAX Percent
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The percentage of CAM currently being used by this session traffic entry "
|
||
|
|
::= { snCamUsageSessionEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- the snCamUsageOther table
|
||
|
|
|
||
|
|
-- The snCamUsageOthers table contains information of the entity's
|
||
|
|
-- CAM usage for types other than L3, L2, or Session.
|
||
|
|
|
||
|
|
snCamUsageOtherTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnCamUsageOtherEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A list of snCamUsageOther entries. This table contains information
|
||
|
|
of the entitiy's CAM usage for types other than L3, L2, or Session."
|
||
|
|
::= { snCamUsage 4 }
|
||
|
|
|
||
|
|
snCamUsageOtherEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnCamUsageOtherEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry containing management information applicable to CAM usage
|
||
|
|
for types other than L3, L2, or Session"
|
||
|
|
INDEX { snCamUsageOtherSlot,
|
||
|
|
snCamUsageOtherProcessor,
|
||
|
|
snCamUsageOtherType }
|
||
|
|
::= { snCamUsageOtherTable 1 }
|
||
|
|
|
||
|
|
SnCamUsageOtherEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
snCamUsageOtherSlot Unsigned32,
|
||
|
|
snCamUsageOtherProcessor Unsigned32,
|
||
|
|
snCamUsageOtherType INTEGER,
|
||
|
|
snCamUsageOtherSize Unsigned32,
|
||
|
|
snCamUsageOtherFree Gauge32,
|
||
|
|
snCamUsageOtherUsedPercent Percent
|
||
|
|
}
|
||
|
|
|
||
|
|
snCamUsageOtherSlot OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies a linecard in the device"
|
||
|
|
::= { snCamUsageOtherEntry 1 }
|
||
|
|
|
||
|
|
snCamUsageOtherProcessor OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..2)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A number which uniquely identifies the network processor within a
|
||
|
|
linecard in the device"
|
||
|
|
::= { snCamUsageOtherEntry 2 }
|
||
|
|
|
||
|
|
snCamUsageOtherType OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
gre(1),
|
||
|
|
multicastVpls(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object identifies the type."
|
||
|
|
::= { snCamUsageOtherEntry 3 }
|
||
|
|
|
||
|
|
snCamUsageOtherSize OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The effective CAM size for this Other traffic entry. For GRE,
|
||
|
|
each unit is 8 bytes. For multicast VPLS, each unit is 16 bytes."
|
||
|
|
::= { snCamUsageOtherEntry 4 }
|
||
|
|
|
||
|
|
snCamUsageOtherFree OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
UNITS "Entries"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The amount of CAM currently available this Other traffic entry.
|
||
|
|
For GRE, each unit is 8 bytes. For multicast VPLS, each unit is 16 bytes."
|
||
|
|
::= { snCamUsageOtherEntry 5 }
|
||
|
|
|
||
|
|
snCamUsageOtherUsedPercent OBJECT-TYPE
|
||
|
|
SYNTAX Percent
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The percentage of CAM currently being used by this entry "
|
||
|
|
::= { snCamUsageOtherEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
END
|