436 lines
13 KiB
Plaintext
436 lines
13 KiB
Plaintext
|
FOUNDRY-SN-STACKING-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
snSwitch
|
||
|
|
FROM FOUNDRY-SN-SWITCH-GROUP-MIB
|
||
|
|
MacAddress
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
DisplayString
|
||
|
|
FROM FOUNDRY-SN-AGENT-MIB
|
||
|
|
InterfaceIndexOrZero
|
||
|
|
FROM IF-MIB;
|
||
|
|
snStacking MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "201006020000Z" -- 04 June 2010
|
||
|
|
ORGANIZATION "Brocade Communications Systems, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Technical Support Center
|
||
|
|
130 Holger Way,
|
||
|
|
San Jose, CA 95134
|
||
|
|
Email: ipsupport@brocade.com
|
||
|
|
Phone: 1-800-752-8061
|
||
|
|
URL: www.brocade.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"Management Information for stacking system
|
||
|
|
configuration and operational status.
|
||
|
|
|
||
|
|
Copyright 1996-2010 Brocade Communications Systems, Inc.
|
||
|
|
All rights reserved.
|
||
|
|
This Brocade Communications Systems SNMP Management Information Base Specification
|
||
|
|
embodies Brocade Communications Systems' confidential and proprietary
|
||
|
|
intellectual property. Brocade Communications Systems retains all
|
||
|
|
title and ownership in the Specification, including any revisions.
|
||
|
|
|
||
|
|
This Specification is supplied AS IS, and Brocade Communications Systems makes
|
||
|
|
no warranty, either express or implied, as to the use,
|
||
|
|
operation, condition, or performance of the specification, and any unintended
|
||
|
|
consequence it may on the user environment."
|
||
|
|
|
||
|
|
REVISION "201006020000Z" -- 04 June 2010
|
||
|
|
DESCRIPTION
|
||
|
|
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
|
||
|
|
REVISION "200805050000Z" -- May 5, 2008
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { snSwitch 31}
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Stacking system
|
||
|
|
--
|
||
|
|
|
||
|
|
snStackingGlobalObjects OBJECT IDENTIFIER ::= { snStacking 1 }
|
||
|
|
snStackingTableObjects OBJECT IDENTIFIER ::= { snStacking 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Stacking system Global Scalar Object Section
|
||
|
|
--
|
||
|
|
|
||
|
|
snStackingGlobalConfigState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(0),
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Configure stack state for stacking feature on the global level.
|
||
|
|
none: neutral, receive packets only
|
||
|
|
enable: stacking is enable, send and receive packets
|
||
|
|
disable: stacking is disable, No send and receive packets"
|
||
|
|
::= { snStackingGlobalObjects 1}
|
||
|
|
|
||
|
|
snStackingGlobalMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Management MAC address of the stacking system.
|
||
|
|
This is available to change management MAC address of stack
|
||
|
|
for administrative purpose. It is strongly recommended that this
|
||
|
|
command should be used with upmost caution to prevent duplicate
|
||
|
|
MAC address and must reboot the system to take an effect.
|
||
|
|
It is mutually exclusive from enabling the persistent MAC timer.
|
||
|
|
Enter zero MAC address to remove the configured MAC address"
|
||
|
|
::= { snStackingGlobalObjects 2 }
|
||
|
|
|
||
|
|
snStackingGlobalPersistentMacTimerState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(0),
|
||
|
|
disabled(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Configure persistent MAC timer state for stacking feature on the global level.
|
||
|
|
enable: the persistent MAC timer is active and configured. The persistent MAC
|
||
|
|
timer is set as the default timer (60 minutes)
|
||
|
|
disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC
|
||
|
|
address and use new active stack unit's base MAC address "
|
||
|
|
::= { snStackingGlobalObjects 3}
|
||
|
|
|
||
|
|
snStackingGlobalPersistentMacTimer OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Persistent MAC timer in minutes for the stacking system
|
||
|
|
Number of minutes to retain original active stack unit's base MAC address in event of
|
||
|
|
active unit crash or removal. This timer is triggered when new active unit is elected.
|
||
|
|
When timer expires, new active unit will change stacking MAC to its own base MAC
|
||
|
|
address and advertise its own base MAC address to management VLAN to update the
|
||
|
|
ARP table of peers. If you decide to use new active unit's MAC address, one must enter
|
||
|
|
this timer again to reactivate the persistent MAC.
|
||
|
|
0 - keep it forever.
|
||
|
|
5 to 3600 - valid value range.
|
||
|
|
60 - default value."
|
||
|
|
::= { snStackingGlobalObjects 4 }
|
||
|
|
|
||
|
|
snStackingGlobalTopology OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
chain(2),
|
||
|
|
ring(3),
|
||
|
|
standalone(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The topology of the stacking system "
|
||
|
|
::= { snStackingGlobalObjects 5 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Stacking system Table Object Section
|
||
|
|
--
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Stacking configuration unit Table
|
||
|
|
-- Use this table to display and configure stacking related information for each unit
|
||
|
|
--
|
||
|
|
|
||
|
|
snStackingConfigUnitTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnStackingConfigUnitEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Stacking configuration unit table."
|
||
|
|
::= { snStackingTableObjects 1 }
|
||
|
|
|
||
|
|
snStackingConfigUnitEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnStackingConfigUnitEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the stacking configuration table."
|
||
|
|
INDEX { snStackingConfigUnitIndex }
|
||
|
|
::= { snStackingConfigUnitTable 1 }
|
||
|
|
|
||
|
|
SnStackingConfigUnitEntry ::= SEQUENCE {
|
||
|
|
snStackingConfigUnitIndex Integer32,
|
||
|
|
snStackingConfigUnitPriority Integer32,
|
||
|
|
snStackingConfigUnitConfigStackPort InterfaceIndexOrZero,
|
||
|
|
snStackingConfigUnitRowStatus INTEGER,
|
||
|
|
snStackingConfigUnitType DisplayString,
|
||
|
|
snStackingConfigUnitState INTEGER,
|
||
|
|
snStackingConfigUnitStackPort1 InterfaceIndexOrZero,
|
||
|
|
snStackingConfigUnitStackPort2 InterfaceIndexOrZero
|
||
|
|
}
|
||
|
|
|
||
|
|
snStackingConfigUnitIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The stacking unit Id"
|
||
|
|
::= { snStackingConfigUnitEntry 1 }
|
||
|
|
|
||
|
|
snStackingConfigUnitPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The priority in Active/backup eclection."
|
||
|
|
::= { snStackingConfigUnitEntry 2 }
|
||
|
|
|
||
|
|
snStackingConfigUnitConfigStackPort OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndexOrZero
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IfIndex for the configured stacking port. If no
|
||
|
|
stacking port is configured, it will be displayed zero
|
||
|
|
and the first two 10G ports as the default stacking ports.
|
||
|
|
Enter zero to remove the configured stacking port. "
|
||
|
|
::= { snStackingConfigUnitEntry 3 }
|
||
|
|
|
||
|
|
snStackingConfigUnitRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
valid(2),
|
||
|
|
delete(3)
|
||
|
|
-- create(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object is used to delete row in the
|
||
|
|
table and control if they are used. The values that
|
||
|
|
can be written are:
|
||
|
|
delete(3)...deletes the row
|
||
|
|
|
||
|
|
If the row exists, then a SET with value of create(4)
|
||
|
|
returns error 'wrongValue'. Deleted rows go away immediately.
|
||
|
|
The following values can be returned on reads:
|
||
|
|
noSuchName...no such row
|
||
|
|
other(1).....some other cases
|
||
|
|
valid(2)....the row exists and is valid"
|
||
|
|
::= { snStackingConfigUnitEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
snStackingConfigUnitType OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A description of the configured/active system type for each unit."
|
||
|
|
::= { snStackingConfigUnitEntry 5 }
|
||
|
|
|
||
|
|
snStackingConfigUnitState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
local(1),
|
||
|
|
remote(2),
|
||
|
|
reserved(3),
|
||
|
|
empty(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A state for each unit "
|
||
|
|
::= { snStackingConfigUnitEntry 6 }
|
||
|
|
|
||
|
|
snStackingConfigUnitStackPort1 OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndexOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"First stack port for each unit. It returns 0 if stack port does not exist."
|
||
|
|
::= { snStackingConfigUnitEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
snStackingConfigUnitStackPort2 OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndexOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Second stack port for each unit. It returns 0 if stack port does not exist."
|
||
|
|
::= { snStackingConfigUnitEntry 8 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Stacking operation unit Table
|
||
|
|
-- Use this table to display stacking related information for each operational unit
|
||
|
|
--
|
||
|
|
|
||
|
|
snStackingOperUnitTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF SnStackingOperUnitEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Stacking operation unit table."
|
||
|
|
::= { snStackingTableObjects 2 }
|
||
|
|
|
||
|
|
snStackingOperUnitEntry OBJECT-TYPE
|
||
|
|
SYNTAX SnStackingOperUnitEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry in the stacking operation table."
|
||
|
|
INDEX { snStackingOperUnitIndex }
|
||
|
|
::= { snStackingOperUnitTable 1 }
|
||
|
|
|
||
|
|
SnStackingOperUnitEntry ::= SEQUENCE {
|
||
|
|
snStackingOperUnitIndex Integer32,
|
||
|
|
snStackingOperUnitRole INTEGER,
|
||
|
|
snStackingOperUnitMac MacAddress,
|
||
|
|
snStackingOperUnitPriority Integer32,
|
||
|
|
snStackingOperUnitState INTEGER,
|
||
|
|
snStackingOperUnitDescription DisplayString,
|
||
|
|
snStackingOperUnitStackPort1 InterfaceIndexOrZero,
|
||
|
|
snStackingOperUnitStackPort1State INTEGER,
|
||
|
|
snStackingOperUnitStackPort2 InterfaceIndexOrZero,
|
||
|
|
snStackingOperUnitStackPort2State INTEGER,
|
||
|
|
snStackingOperUnitNeighbor1 Integer32,
|
||
|
|
snStackingOperUnitNeighbor2 Integer32,
|
||
|
|
snStackingOperUnitImgVer DisplayString,
|
||
|
|
snStackingOperUnitBuildlVer DisplayString
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
snStackingOperUnitIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The stacking unit Id"
|
||
|
|
::= { snStackingOperUnitEntry 1 }
|
||
|
|
|
||
|
|
snStackingOperUnitRole OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
active(2),
|
||
|
|
standby(3),
|
||
|
|
member(4),
|
||
|
|
standalone(5)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A role for each unit "
|
||
|
|
::= { snStackingOperUnitEntry 2 }
|
||
|
|
|
||
|
|
snStackingOperUnitMac OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A MAC address for each unit"
|
||
|
|
::= { snStackingOperUnitEntry 3 }
|
||
|
|
|
||
|
|
snStackingOperUnitPriority OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The priority in Active/backup eclection."
|
||
|
|
::= { snStackingOperUnitEntry 4 }
|
||
|
|
|
||
|
|
snStackingOperUnitState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
local(1),
|
||
|
|
remote(2),
|
||
|
|
reserved(3),
|
||
|
|
empty(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A state for each unit "
|
||
|
|
::= { snStackingOperUnitEntry 5}
|
||
|
|
|
||
|
|
snStackingOperUnitDescription OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..128))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Describes the stacking state for each unit."
|
||
|
|
::= { snStackingOperUnitEntry 6 }
|
||
|
|
|
||
|
|
snStackingOperUnitStackPort1 OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndexOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"First stack port for each unit. It returns 0 if stack port does not exist."
|
||
|
|
::= { snStackingOperUnitEntry 7 }
|
||
|
|
|
||
|
|
snStackingOperUnitStackPort1State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
up(2),
|
||
|
|
down(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The first stack port state for each unit. "
|
||
|
|
::= { snStackingOperUnitEntry 8 }
|
||
|
|
|
||
|
|
|
||
|
|
snStackingOperUnitStackPort2 OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndexOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Second stack port for each unit. It returns 0 if stack port does not exist."
|
||
|
|
::= { snStackingOperUnitEntry 9 }
|
||
|
|
|
||
|
|
snStackingOperUnitStackPort2State OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
up(2),
|
||
|
|
down(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The second stack port state for each unit. "
|
||
|
|
::= { snStackingOperUnitEntry 10 }
|
||
|
|
|
||
|
|
snStackingOperUnitNeighbor1 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Stacking neighbor unit (left) number.
|
||
|
|
If there is no neighbor unit, then it returns 0."
|
||
|
|
|
||
|
|
::= { snStackingOperUnitEntry 11 }
|
||
|
|
|
||
|
|
snStackingOperUnitNeighbor2 OBJECT-TYPE
|
||
|
|
SYNTAX Integer32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Stacking neighbor unit (left) number.
|
||
|
|
If there is no neighbor unit, then it returns 0."
|
||
|
|
::= { snStackingOperUnitEntry 12 }
|
||
|
|
|
||
|
|
snStackingOperUnitImgVer OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..32))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The version of the running software image"
|
||
|
|
::= { snStackingOperUnitEntry 13 }
|
||
|
|
|
||
|
|
snStackingOperUnitBuildlVer OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE (0..32))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The version of the running software build"
|
||
|
|
::= { snStackingOperUnitEntry 14 }
|
||
|
|
|
||
|
|
END
|