307 lines
12 KiB
Plaintext
307 lines
12 KiB
Plaintext
|
-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved
|
||
|
|
|
||
|
|
ARICENT-POE-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
RowStatus, MacAddress, DisplayString
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
InterfaceIndex
|
||
|
|
FROM IF-MIB;
|
||
|
|
|
||
|
|
fspoe MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "202112200000Z"
|
||
|
|
ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
|
||
|
|
CONTACT-INFO "support@aricent.com"
|
||
|
|
DESCRIPTION
|
||
|
|
" The proprietary MIB module for POE. "
|
||
|
|
|
||
|
|
REVISION "202112200000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added fsPethPsPortPowerPriorityStatic object
|
||
|
|
supporting the export of static (vs dynamic)
|
||
|
|
port power priority settings."
|
||
|
|
|
||
|
|
REVISION "201906240000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added fsPowerModeDCinVoltageRange object
|
||
|
|
which allows user to specify in which input voltage
|
||
|
|
range will the TX1012-P-DC be powered."
|
||
|
|
|
||
|
|
REVISION "201209050000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
" The proprietary MIB module for POE. "
|
||
|
|
::= { enterprises futuresoftware (2076) 103 }
|
||
|
|
|
||
|
|
-- ------------------------------------------------------------
|
||
|
|
-- groups in the MIB
|
||
|
|
-- ------------------------------------------------------------
|
||
|
|
|
||
|
|
fsPoeSystem OBJECT IDENTIFIER ::= { fspoe 1 }
|
||
|
|
|
||
|
|
-- ------------------------------------------------------------------
|
||
|
|
-- The Poe System Group
|
||
|
|
-- ------------------------------------------------------------------
|
||
|
|
fsPoeGlobalAdminStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { start(1), shutdown(2)}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Start or shutdown PoE Module in the system
|
||
|
|
|
||
|
|
When set as 'start' PoE module initializes data structures and
|
||
|
|
gets the power supply status.
|
||
|
|
|
||
|
|
When shutdown, all resources used by PoE module
|
||
|
|
will be released back to the system and also power will
|
||
|
|
be shut on all PoE enabled ports"
|
||
|
|
::= { fsPoeSystem 1 }
|
||
|
|
|
||
|
|
-- Poe Mac Table
|
||
|
|
|
||
|
|
fsPoeMacTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FsPoeMacEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains information associated MAC Addresses for which
|
||
|
|
Power has to be applied."
|
||
|
|
::= { fsPoeSystem 2 }
|
||
|
|
|
||
|
|
|
||
|
|
fsPoeMacEntry OBJECT-TYPE
|
||
|
|
SYNTAX FsPoeMacEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Powered Device(PD)s MAC address, the port through which its
|
||
|
|
been learnt"
|
||
|
|
INDEX { fsPoePdMacAddress }
|
||
|
|
::= { fsPoeMacTable 1 }
|
||
|
|
|
||
|
|
FsPoeMacEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
fsPoePdMacAddress
|
||
|
|
MacAddress,
|
||
|
|
fsPoePdMacPort
|
||
|
|
InterfaceIndex,
|
||
|
|
fsPoePdMacRowStatus
|
||
|
|
RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
fsPoePdMacAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"MAC address of the PD."
|
||
|
|
::= { fsPoeMacEntry 1 }
|
||
|
|
|
||
|
|
fsPoePdMacPort OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object stores the port through which the fsPoePdMacAddress
|
||
|
|
has been learnt "
|
||
|
|
::= { fsPoeMacEntry 2 }
|
||
|
|
|
||
|
|
fsPoePdMacRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the status of this entry."
|
||
|
|
::= { fsPoeMacEntry 3 }
|
||
|
|
|
||
|
|
-- Fs Poe Port Table
|
||
|
|
fsPethPsePortTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF FsPethPsePortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A table of objects that display and control non-standard power
|
||
|
|
characteristics of power Ethernet ports on a Power Source
|
||
|
|
Entity (PSE) device. This group will be implemented in
|
||
|
|
managed power Ethernet switches and mid-span devices.
|
||
|
|
Values of all read-write objects in this table are
|
||
|
|
persistent at restart/reboot."
|
||
|
|
::= { fsPoeSystem 3 }
|
||
|
|
|
||
|
|
fsPethPsePortEntry OBJECT-TYPE
|
||
|
|
SYNTAX FsPethPsePortEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of objects that display and control non-standard power
|
||
|
|
characteristics of a power Ethernet PSE port."
|
||
|
|
INDEX { fsPethPsePortGroupIndex , fsPethPsePortIndex }
|
||
|
|
::= { fsPethPsePortTable 1 }
|
||
|
|
|
||
|
|
FsPethPsePortEntry ::= SEQUENCE {
|
||
|
|
fsPethPsePortGroupIndex
|
||
|
|
Integer32,
|
||
|
|
fsPethPsePortIndex
|
||
|
|
Integer32,
|
||
|
|
fsPethPsPortPowerMeasurementsAmperage
|
||
|
|
Integer32,
|
||
|
|
fsPethPsPortPowerMeasurementsVoltage
|
||
|
|
Integer32,
|
||
|
|
fsPethPsPortPowerMeasurementsWattage
|
||
|
|
Integer32,
|
||
|
|
fsPethPsPortPowerPriorityStatic
|
||
|
|
INTEGER,
|
||
|
|
fsPethPsPortPowerMode
|
||
|
|
INTEGER,
|
||
|
|
fsPethPsPortPowerModeDynamic
|
||
|
|
INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
fsPethPsePortGroupIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable uniquely identifies the group
|
||
|
|
containing the port to which a power Ethernet PSE is
|
||
|
|
connected. Group means box in the stack, module in a
|
||
|
|
rack and the value 1 MUST be used for non-modular devices."
|
||
|
|
::= { fsPethPsePortEntry 1 }
|
||
|
|
|
||
|
|
fsPethPsePortIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable uniquely identifies the power Ethernet PSE
|
||
|
|
port within group fsPethPsePortGroupIndex to which the
|
||
|
|
power Ethernet PSE entry is connected."
|
||
|
|
::= { fsPethPsePortEntry 2 }
|
||
|
|
fsPethPsPortPowerMeasurementsAmperage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable contains the amperage value of a power Ethernet PSE port on which a device is connected"
|
||
|
|
::= { fsPethPsePortEntry 3 }
|
||
|
|
fsPethPsPortPowerMeasurementsVoltage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable contains the voltage value of a power Ethernet PSE port on which a device is connected"
|
||
|
|
::= { fsPethPsePortEntry 4 }
|
||
|
|
fsPethPsPortPowerMeasurementsWattage OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This variable contains the wattage value of a power Ethernet PSE port on which a device is connected"
|
||
|
|
::= { fsPethPsePortEntry 5 }
|
||
|
|
|
||
|
|
fsPethPsPortPowerPriorityStatic OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
critical(1),
|
||
|
|
high(2),
|
||
|
|
low(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls the priority of the port from the point
|
||
|
|
of view of a power management algorithm. The priority that
|
||
|
|
is set by this variable could be used by a control mechanism
|
||
|
|
that prevents over current situations by disconnecting first
|
||
|
|
ports with lower power priority. Ports that connect devices
|
||
|
|
critical to the operation of the network - like the E911
|
||
|
|
telephones ports - should be set to higher priority.
|
||
|
|
|
||
|
|
This object represents the static Port Power Priority value.
|
||
|
|
When the standard pethPsePortPowerPriority value is different
|
||
|
|
than the value of this object, a dynamic setting is currently
|
||
|
|
applied."
|
||
|
|
|
||
|
|
::= { fsPethPsePortEntry 6 }
|
||
|
|
|
||
|
|
fsPethPsPortPowerMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
std802d3(1),
|
||
|
|
passive-24v(2),
|
||
|
|
passive-54v(3),
|
||
|
|
force-power(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object controls the power mode configured by the user.
|
||
|
|
It is port dependant, based on the capabilities of the port.
|
||
|
|
802d3 is standards based PoE, passive-24v is 24V passive PoE (no detection, no classification),
|
||
|
|
passive-54v is 54V passive PoE (no detection, no classification),
|
||
|
|
force is 54V passive PoE (with detection, no classification)."
|
||
|
|
|
||
|
|
::= { fsPethPsePortEntry 7 }
|
||
|
|
|
||
|
|
fsPethPsPortPowerModeDynamic OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
nonDynamic(0),
|
||
|
|
dynamic(1)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This objects informs if a power mode has been dynamically changed on a port via the auto-detect mechanism."
|
||
|
|
|
||
|
|
::= { fsPethPsePortEntry 8 }
|
||
|
|
|
||
|
|
fsPowerModeAutoDetect OBJECT-TYPE
|
||
|
|
SYNTAX BITS { cnMedusaOn(0), cnMedusaOff(1), cnWaveOn(2), cnWaveOff(3) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This setting enables auto-detection of certain devices via LLDP and applies a specific power-mode for them.
|
||
|
|
For cnMedusa we will automatically change power-mode to force-power.
|
||
|
|
This is possible becuase cnMedusa/cnWave boots in 802d3 mode, but then it requires force-mode to function properly.
|
||
|
|
The 802d3 boot-up mode allows it to transmit the LLDP TLV by which it is recognised as a cnMedusa/cnWave.
|
||
|
|
Depending on the device, this setting will only apply on corresponding capable ports"
|
||
|
|
|
||
|
|
::= { fsPoeSystem 4 }
|
||
|
|
|
||
|
|
fsPowerModePassiveSafe OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This setting enables PoE passive-safe mode, which offers a certain degree of protection against accidental insertion
|
||
|
|
of non-compatible devices in ports already configured in a passive PoE mode (passive-low or passive-high). Passive modes
|
||
|
|
can damage certain devices since it automatically puts voltage out on the port, w/o any sort of 802.3 detection."
|
||
|
|
|
||
|
|
::= { fsPoeSystem 5 }
|
||
|
|
|
||
|
|
fsPowerModeHighTemperature OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { enable(1), disable(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This setting enables high temperature mode, which offers the posibility to reduce the PoE budget to a predetermined value
|
||
|
|
when the switch is running in a high temperature environment."
|
||
|
|
::= { fsPoeSystem 6 }
|
||
|
|
|
||
|
|
fsPowerFirmwareVersion OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString (SIZE(0..127))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the PoE MCU firmware version"
|
||
|
|
::= { fsPoeSystem 7 }
|
||
|
|
|
||
|
|
fsPowerModeDCinVoltageRange OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER { range9-29V(1), range30-60V(2) }
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This setting allows the user to specifiy in which range the DC input voltage is located so that the PoE power budget can be
|
||
|
|
accordingly adjusted. Currently, only necessary and available on the TX1012-P-DC"
|
||
|
|
::= { fsPoeSystem 8 }
|
||
|
|
END
|