david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cdata/NSCRTV-FTTX-GPON-MIB

5508 lines
147 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- NSCRTV-FTTX-GPON-MIB.mib
--
NSCRTV-FTTX-GPON-MIB DEFINITIONS ::= BEGIN
IMPORTS
BridgeId, Timeout
FROM BRIDGE-MIB
enterprises, TimeTicks, IpAddress, Unsigned32, Gauge32,
Counter32, Counter64, OBJECT-TYPE, BITS, OBJECT-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, TruthValue, RowStatus, MacAddress, DisplayString,
TimeStamp, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
--
-- Textual conventions
--
GponAlarmInstance ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Alarm instance, which define the detailed management object
reported the alarm. For example, OLT device 1, slot 2, port 3
reports a port down alarm.
It is represents in OCTET STRING format.
1. The first four OCTET has same definition as GponDeviceIndex TC.
2. The fifth OCTET is the slot definition of ONU, which shall
have same definition as last byte definition in GponCardIndex
TC.
3. The sixth OCTET is the UNI port ID of ONU, which is similar to
GponPortIndex TC.
4. The seventh and eighth OCTETS are reserved and shall be set to
0 at any time, and shall be ignored by maangement system.
For example,
0x01 02 03 04 05 06 00 00, represents OLT device 1, slot 2, port 3,
ONU logical ID 4, slot 5 UNI port 6 of the connected ONU.
"
SYNTAX OCTET STRING (SIZE (8))
GponAlarmCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Alarm codes, uniquely indentifies each kind of alarm.
Refer to GPON alarm definition table"
SYNTAX INTEGER (1..65535)
GponSeverityType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" "
SYNTAX INTEGER
{
critical(1),
major(2),
minor(3),
warning(4),
info(5),
clear(6)
}
TAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
First four octets sames definition of IpAddress, stands for NMS IP address
The last four octets same definition of INTEGER, stands for trap UDP port "
SYNTAX OCTET STRING (SIZE (8))
GponCardIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least significant bytes
-----------------------------------------------------------------------------
Reserved byte Reserved byte Reserved byte Sub-slot 2-bit Main-slot 6-bit
Notes:
-----
1. Reserved bytes shall be set to 0.
2. The main-slot shall be started from 1, and shall be in a consecutive manner,
for all slots, including service slots, control slots, switch slots, power
slots,FAN slots, etc.For example, 1, 2, 3
3. The sub-slot shall be started from 1, and shall be in a consecutive manner.
For example, 1, 2. If no sub-slot concept of a main-slot, set to 0.
4. For fixed device, if no slot concept, NE shall set both main-slot and sub-slot
to 0, to indicate this is meaningless. For modulized device, they MUST not be
set to 0.This definition shall applied to both OLT and ONU.
5. For trunk, since there is no slot concept, set main-slot to all-1 and sub-slot
to 0. This definition shall applied to both OLT and ONU.
For example,
0x00 00 00 0A, represents main-slot 10, no sub-slot
0x00 00 00 42, represents main-slot 2, sub-slot 1
0x00 00 00 3F, represents a trunk
"
SYNTAX Unsigned32
GponPortIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
The device port number shall start from 1. Nunber 0 had specific meaning, stands for portIndex is meaningless, for the situation defined.
"
SYNTAX INTEGER (0..255)
GponDeviceIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Gpon olt/onu
ONU ID
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the last byte definition of GponCardIndex
to indicate the main-slot and sub-slot index.
3. Pon port must not be 0.
4. The useful ONU logical ID MUST never be set to 0, where NUM of 0 has
another meaning, to indicate that the ONU logical ID is meaningless,
or said to not applied.
Usage guide:
-----------
This TC could be used for OLT SNI, OLT PON port, OLT ONU ID
ONU UNI, OLT device, trunk.
If the refered MIB object does not have clear definition,
refer to the following:
Applied Obj - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum shall be set to 0,
OLT SNI - Same as OLT Pon Port
OLT onu ID - Set OnuNUM to corresponding ONU logical ID
ONU UNI - Same as OLT ONU ID
OLT device - Set card, pon port and OnuNUM to 0
Trunk - Card to 0x3F, pon port to trunk ID, OnuNUM to 0
Olt device to corresponding ONU device
"
SYNTAX Unsigned32
AutoNegotiationTechAbility ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Technology ability of auto negotiation. Refer to
clause 30.6.1.1.5 of IEEE 802.3 2005 edition"
SYNTAX BITS
{
none(0),
tenBaseTFullDuplex(1),
tenBaseTHalfDuplex(2),
hundredBaseTFullDuplex(3),
hundredBaseTHalfDuplex(4),
thousandBaseTFullDuplex(5),
thousandBaseTHalfDuplex(6),
thousandBaseXFullDuplex(7),
thousandBaseXHalfDuplex(8),
fdxPause(9),
fdxApause(10),
fdxSpause(11),
fdxBpause(12)
}
GponStats15MinRecordType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" "
SYNTAX INTEGER (0..96)
GponStats24HourRecordType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" "
SYNTAX INTEGER (0..30)
GponStatsThresholdType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
1- InOctets
2 InPkts
3 InBroadcastPkts
4 InMulticastPkts
5 InPkts64Octets
6 InPkts65to127Octets
7 InPkts128to255Octets
8 InPkts256to511Octets
9 InPkts512to1023Octets
10 InPkts1024to1518Octets
11 InPkts1519to1522Octets
12 InUndersizePkts
13 InOversizePkts
14 InFragments
19 InCRCErrorPkts
20 InDropEvents
21 InJabbers
22 InCollision
23 OutOctets
24 OutPkts
25 OutBroadcastPkts
26 OutMulticastPkts
27 OutPkts64Octets
28 OutPkts65to127Octets
29 OutPkts128to255Octets
30 OutPkts256to511Octets
31 OutPkts512to1023Octets
32 OutPkts1024to1518Octets
33 OutPkts1519o1522Octets
34 OutUndersizePkts
35 OutOversizePkts
36 OutFragments
41 OutCRCErrorPkts
42 OutDropEvents
43 OutJabbers
44 OutCollision
45 GemPortOutGemFrames
46 GemPortInGemFrames
47 GemPortOutBytes
48 GemPortInBytes
50 Temperature
51 Voltage
52 TXPower
53 RXPower
Note:
----------------------------------------------------------------
1. For 50 Temperature, this parameter shall only applied to
a. Slot level, for each service/switch/management card, for
chassis-based system.
b. Node-level, for fixed box.
2. For 50 Temperature, shall be applied to both OLT and ONU
3. For 50 Temperature, since no 15-min performance data collection
are required, system shall ensure the temperature polling interval
no less than 5 seconds. The alarm shall be only generated when the
threshold is acrossed for three continuous intervals, and shall be
cleared, when the threshold is not accrossed any more, for three
continous intervals.
"
SYNTAX INTEGER (1..1024)
--
-- Node definitions
--
-- 1.3.6.1.4.1.17409
nscrtvRoot OBJECT IDENTIFIER ::= { enterprises 17409 }
-- DESCRIPTION
-- "nscrtvRoot"
-- 1.3.6.1.4.1.17409.1
nscrtvHFCemsTree OBJECT IDENTIFIER ::= { nscrtvRoot 1 }
-- 1.3.6.1.4.1.17409.2
nscrtvFTTxTree OBJECT IDENTIFIER ::= { nscrtvRoot 2 }
-- DESCRIPTION
-- "nscrtvFTTxTree define MIB root"
-- 1.3.6.1.4.1.17409.2.1
propertyIdent OBJECT IDENTIFIER ::= { nscrtvFTTxTree 1 }
-- DESCRIPTION
-- 1.3.6.1.4.1.17409.2.2
alarmsIdent OBJECT IDENTIFIER ::= { nscrtvFTTxTree 2 }
-- DESCRIPTION
-- 1.3.6.1.4.1.17409.2.2.12
gponAlarmTree OBJECT IDENTIFIER ::= { alarmsIdent 12 }
-- 1.3.6.1.4.1.17409.2.2.12.1
gponTrapObjectGroup OBJECT IDENTIFIER ::= { gponAlarmTree 1 }
-- ------------------------------------------------------------------------------
-- AlarmManagementObjects[](1.3.6.1.4.1.17409.2.2.12)
-- ------------------------------------------------------------------------------
-- 1.3.6.1.4.1.17409.2.2.12.1.1
gponNotifications OBJECT IDENTIFIER ::= { gponTrapObjectGroup 1 }
-- 1.3.6.1.4.1.17409.2.2.12.1.1.1
gponAlarmNotification NOTIFICATION-TYPE
OBJECTS { gponTrapSequenceNumber, gponTrapOccurTime, gponTrapCode, gponTrapInstance, gponTrapSeverity,
gponTrapCorrelationId, gponTrapAdditionalText }
STATUS current
DESCRIPTION
"Alarm TRAP definition"
::= { gponNotifications 1 }
-- 1.3.6.1.4.1.17409.2.2.12.1.1.2
gponEventNotification NOTIFICATION-TYPE
OBJECTS { gponTrapSequenceNumber, gponTrapOccurTime, gponTrapCode, gponTrapInstance, gponTrapAdditionalText
}
STATUS current
DESCRIPTION
"Event TRAP definition"
::= { gponNotifications 2 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2
gponTrapObjects OBJECT IDENTIFIER ::= { gponTrapObjectGroup 2 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.1
gponTrapInstance OBJECT-TYPE
SYNTAX GponAlarmInstance
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Alarm instance, indicates the detailed managed object, which
detects faults.
"
::= { gponTrapObjects 1 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.2
gponTrapCorrelationId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The unique sequence number for the alarm to be cleared, for alarm clearing.
Set to 0 for alarm reporting"
::= { gponTrapObjects 2 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.3
gponTrapAdditionalText OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Additional info to the alarm, for further desciption of the
alarm. The format of it shall be related to each kind alarm
defined in alarm reference table"
::= { gponTrapObjects 3 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.4
gponTrapCode OBJECT-TYPE
SYNTAX GponAlarmCode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION " "
::= { gponTrapObjects 4 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.5
gponTrapSeverity OBJECT-TYPE
SYNTAX GponSeverityType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION " "
::= { gponTrapObjects 5 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.6
gponTrapOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION " "
::= { gponTrapObjects 6 }
-- 1.3.6.1.4.1.17409.2.2.12.1.2.7
gponTrapSequenceNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"
A unique sequence number for each trap generated by node. The sequence
number shall be reset to 1 when node restarts.
The alarm sequence number shall be independent of the event sequence
number. Each shall be self-governed.
--------------------------------------------------------------------------------
The sequence ID of alarm shall be assigned from the order of transmitting
trap to the NMS, instead of the order of alarm occurance. Therefore the NMS
will receive the continuous sequence ID.
1. When device is in active/standby mode, sequence ID shall be synchronized
between active and standby control module.
2. When control module switchover takes place, the current sequence ID shall
keep the synchronized value.
3. When device restarts, sequence ID shall start from 1.
4. It shall be increased per alarm trap including both alarm raising and clear.
5. Non-zero value shall be used. When reaches the maximum number, it shall
roll back to 1.
--------------------------------------------------------------------------------
The sequence ID of event shall be assigned from the order of transmitting
trap to the NMS. Therefore the NMS will receive the continuous sequence ID.
1. When device is in active/standby mode, sequence ID shall be synchronized
between active and standby control module.
2. When control module switchover takes place, the current sequence ID shall
keep the synchronized value.
3. When device restarts, sequence ID shall start from 1.
4. It shall be increased per event trap.
5. Non-zero value shall be used. When reaches the maximum number, it shall
roll back to 1.
"
::= { gponTrapObjects 7 }
-- 1.3.6.1.4.1.17409.2.2.12.2
gponAlarmObjGroup OBJECT IDENTIFIER ::= { gponAlarmTree 2 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1
gponActiveAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponActiveAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Active alarm table
The device shall maintain this table, to maintain all outstanding
(not cleared) alarms generated by the device, including:
1. Not hit device local alarm filter. That means had been reported to
trap receiver (NMS or EMS)
2. Hit local alarm filter. That means not trap is reported to trap receiver
for the alarm.
The device shall maintain two numbers:
1. Alarm sequence number: As described in gponTrapSequenceNumber, it is initially
set to 1 when device restarts, increases per trap reported to trap receiver,
and rollover to 1 once it reaches the maximum value.
From NMS's view, traps received from a nodes will be consecutive, by identifying
the alarm sequence number carried in alarm trap. If breaks, means some trap
may be lost, since packet loss between NMS and NE.
2. Alarm raising number: This is maintained by NE internally and does not intend for
being acknowledged by external manage system. It is designed to uniquely indentify
each alarm raised by NE, excluding duplicates. Once one alarm raised, despite
whether it is hit by alarm filter, NE shall assign a raising number to it. So, it
major functionality is to uniquely identify alarms hit NE local alarm filter, since
this kindly alarm will not be reported to NMS, and hence no alarm sequence number
is assigned to it.
It is initially set to 1 when device restarts, increases per alarm generation (
excluding duplicates), and rollover to 1 once it reaches the maximum value.
FUNCTION DESCRIPTION OF ACTIVE ALARM TABLE:
ALARM RAISING
----------------------
1. When NE detects one fault and associates to one kind of alarm, it shall check whether
there is same alarm in active alarm table, which is indexed by alarm code and alarm
instance. If hits, it means duplicates, update the corresponding entry of the table.
Otherwise,
2. The alarm is not a duplicate. Assign an alarm raising number. Check whether the
alarm hits local alarm filters. If hits, set alarm sequence number to 0.
Create an entry into active alarm table. Otherwise,
3. Assign an alarm sequence number to the alarm. Create an entry into active alarm
table. Report the alarm trap to all trap receivers.
ALARM CLEARING
----------------------
1. When NE detects one fault is cleared and associates to one kind of alarm, it shall
check whether there is corresponding alarm in active alarm table, which is indexed
by alarm code and alarm instance. If no hit, escape this clear event. Upon a hit,
if the alarm sequence number is 0, move the active alarm entry to history alarm
table and update the corresponding fields. At this case, historyAlarmCorrelationId
and historyAlarmSeqNum will be set to 0.
Otherwise,
2. Assign an alarm sequence number to the clear trap. Report the alarm clear trap to
all trap receivers. Move the active alarm entry to history alarm table and update
the corresponding fields. At this case, activeAlarmSeqNum shall be copied to
historyAlarmCorrelationId, and historyAlarmSeqNum shall be set to the new alarm
sequence number for the clear trap.
ALARM SYNCHRONIZATION BETWEEN NE AND NMS
---------------------------------------------
1. Once NMS finds the alarm sequence number in reported alarm traps is not continuous,
it will walk active or history alarm table of the NE for the lost seuqence number.
"
::= { gponAlarmObjGroup 1 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1
gponActiveAlarmEntry OBJECT-TYPE
SYNTAX GponActiveAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
INDEX { gponActiveAlarmSeqNum, gponActiveAlarmRaisingNumber }
::= { gponActiveAlarmTable 1 }
GponActiveAlarmEntry ::=
SEQUENCE {
gponActiveAlarmSeqNum
Unsigned32,
gponActiveAlarmCode
GponAlarmCode,
gponActiveAlarmInstance
GponAlarmInstance,
gponActiveAlarmSeverity
GponSeverityType,
gponActiveAlarmRaisingNumber
Unsigned32,
gponActiveAlarmFirstOccurTime
DateAndTime,
gponActiveAlarmLastOccurTime
DateAndTime,
gponActiveAlarmRepeats
Counter32,
gponActiveAlarmConfirm
TruthValue,
gponActiveAlarmAdditionalText
OCTET STRING
}
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.1
gponActiveAlarmSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm sequence number
The definition refered to the description of activeAlarmTable"
::= { gponActiveAlarmEntry 1 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.2
gponActiveAlarmCode OBJECT-TYPE
SYNTAX GponAlarmCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { gponActiveAlarmEntry 2 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.3
gponActiveAlarmInstance OBJECT-TYPE
SYNTAX GponAlarmInstance
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm instance, indicates the detailed managed object"
::= { gponActiveAlarmEntry 3 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.4
gponActiveAlarmSeverity OBJECT-TYPE
SYNTAX GponSeverityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { gponActiveAlarmEntry 4 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.5
gponActiveAlarmRaisingNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm raising number.
The definition refered to the description of activeAlarmTable"
::= { gponActiveAlarmEntry 5 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.6
gponActiveAlarmFirstOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time stamp when alarm occurs, which triggered to create the
active alarm entry."
::= { gponActiveAlarmEntry 6 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.7
gponActiveAlarmLastOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time stamp when alarm occurs, where the alarm is duplicated
with existed active alarm entry, and it was the latest one. "
::= { gponActiveAlarmEntry 7 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.8
gponActiveAlarmRepeats OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of repeated alarms for this active alarm entry"
::= { gponActiveAlarmEntry 8 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.9
gponActiveAlarmConfirm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Node shall not clear an active alarm, upon the confirmation
of the active alarm, but just mark an acknowledged status.
An alarm will only be cleared once the clear condition hits."
::= { gponActiveAlarmEntry 9 }
-- 1.3.6.1.4.1.17409.2.2.12.2.1.1.10
gponActiveAlarmAdditionalText OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional info to the alarm, for further desciption of the
alarm. The format of it shall be related to each kind alarm
defined in alarm reference table"
::= { gponActiveAlarmEntry 10 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2
gponHistoryAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponHistoryAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History alarm table.
The device shall maintain this table, to maintain all cleared
alarms generated by the device, including:
1. Not hit device local alarm filter. That means had been reported to
trap receiver (NMS or EMS)
2. Hit local alarm filter. That means not trap is reported to trap receiver
for the alarm.
The number of history alarm enteries in the table could be device-specific.
However, it is recommended no less than 200 entries.
The detailed function definition refers to that given in description of
activeAlarmTable.
"
::= { gponAlarmObjGroup 2 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1
gponHistoryAlarmEntry OBJECT-TYPE
SYNTAX GponHistoryAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
INDEX { gponHistoryAlarmSeqNum, gponHistoryAlarmRaisingNumber }
::= { gponHistoryAlarmTable 1 }
GponHistoryAlarmEntry ::=
SEQUENCE {
gponHistoryAlarmSeqNum
Unsigned32,
gponHistoryAlarmCode
GponAlarmCode,
gponHistoryAlarmInstance
GponAlarmInstance,
gponHistoryAlarmSeverity
GponSeverityType,
gponHistoryAlarmRaisingNumber
Unsigned32,
gponHistoryAlarmFirstOccurTime
DateAndTime,
gponHistoryAlarmLastOccurTime
DateAndTime,
gponHistoryAlarmRepeats
Counter32,
gponHistoryAlarmCorrelationId
Unsigned32,
gponHistoryAlarmAdditionalText
OCTET STRING,
gponHistoryAlarmClearTime
DateAndTime
}
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.1
gponHistoryAlarmSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm sequence number
The definition refered to the description of gponHistoryAlarmTable"
::= { gponHistoryAlarmEntry 1 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.2
gponHistoryAlarmCode OBJECT-TYPE
SYNTAX GponAlarmCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { gponHistoryAlarmEntry 2 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.3
gponHistoryAlarmInstance OBJECT-TYPE
SYNTAX GponAlarmInstance
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm instance, indicates the detailed managed object"
::= { gponHistoryAlarmEntry 3 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.4
gponHistoryAlarmSeverity OBJECT-TYPE
SYNTAX GponSeverityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { gponHistoryAlarmEntry 4 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.5
gponHistoryAlarmRaisingNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Alarm raising number.
The definition refered to the description of gponHistoryAlarmTable"
::= { gponHistoryAlarmEntry 5 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.6
gponHistoryAlarmFirstOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time stamp when alarm occurs, which triggered to create the
history alarm entry."
::= { gponHistoryAlarmEntry 6 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.7
gponHistoryAlarmLastOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time stamp when alarm occurs, where the alarm is duplicated
with existed history alarm entry, and it was the latest one. "
::= { gponHistoryAlarmEntry 7 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.8
gponHistoryAlarmRepeats OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of repeated alarms for this history alarm entry"
::= { gponHistoryAlarmEntry 8 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.9
gponHistoryAlarmCorrelationId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the corresponding sequence ID of the alarm that to
be cleared. "
::= { gponHistoryAlarmEntry 9 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.10
gponHistoryAlarmAdditionalText OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional info to the alarm, for further desciption of the
alarm. The format of it shall be related to each kind alarm
defined in alarm reference table"
::= { gponHistoryAlarmEntry 10 }
-- 1.3.6.1.4.1.17409.2.2.12.2.2.1.11
gponHistoryAlarmClearTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define when the alarm was cleared"
::= { gponHistoryAlarmEntry 11 }
-- 1.3.6.1.4.1.17409.2.2.12.2.3
gponEventLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event log table.
The device shall maintain this table, to maintain all events had
be reported by the device, including:
1. The event table shall be saved in RAM memory and shall be flushed
when OLT restarts.
2. The event log table shall support no less than 200 entries. When
the event log table is full, the oldest entry in the table shall be
removed first.
3. When OLT is configured with control module redundancy, active controller
shall automatically synchronize the events in event log table b/w active
and standby.
"
::= { gponAlarmObjGroup 3 }
-- 1.3.6.1.4.1.17409.2.2.12.2.3.1
gponEventLogEntry OBJECT-TYPE
SYNTAX GponEventLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
INDEX { gponEventSeqNum }
::= { gponEventLogTable 1 }
GponEventLogEntry ::=
SEQUENCE {
gponEventSeqNum
Unsigned32,
gponEventCode
GponAlarmCode,
gponEventInstance
GponAlarmInstance,
gponEventOccurTime
DateAndTime,
gponEventAdditionalText
OCTET STRING
}
-- 1.3.6.1.4.1.17409.2.2.12.2.3.1.1
gponEventSeqNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event sequence number
The definition refered to the description of gponTrapSequenceNumber"
::= { gponEventLogEntry 1 }
-- 1.3.6.1.4.1.17409.2.2.12.2.3.1.2
gponEventCode OBJECT-TYPE
SYNTAX GponAlarmCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { gponEventLogEntry 2 }
-- 1.3.6.1.4.1.17409.2.2.12.2.3.1.3
gponEventInstance OBJECT-TYPE
SYNTAX GponAlarmInstance
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Event instance, indicates the detailed managed object"
::= { gponEventLogEntry 3 }
-- 1.3.6.1.4.1.17409.2.2.12.2.3.1.4
gponEventOccurTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The time stamp when event occurs"
::= { gponEventLogEntry 4 }
-- 1.3.6.1.4.1.17409.2.2.12.2.3.1.5
gponEventAdditionalText OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Additional info to the event, for further desciption of the
event. The format of it shall be related to each kind event
defined in event reference table"
::= { gponEventLogEntry 5 }
-- 1.3.6.1.4.1.17409.2.2.12.3
gponManagementObjGroup OBJECT IDENTIFIER ::= { gponAlarmTree 3 }
-- 1.3.6.1.4.1.17409.2.2.12.3.1
gponManagementAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponManagementAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of transport addresses to be used in the generation
of SNMP messages."
::= { gponManagementObjGroup 1 }
-- 1.3.6.1.4.1.17409.2.2.12.3.1.1
gponManagementAddrEntry OBJECT-TYPE
SYNTAX GponManagementAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A transport address to be used in the generation
of SNMP operations.
Entries in the snmpTargetAddrTable are created and
deleted using the snmpTargetAddrRowStatus object."
INDEX { gponManagementAddrName }
::= { gponManagementAddrTable 1 }
GponManagementAddrEntry ::=
SEQUENCE {
gponManagementAddrName
OCTET STRING,
gponManagementAddrTAddress
TAddress,
gponManagementAddrCommunity
OCTET STRING,
gponManagementAddrRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.2.12.3.1.1.1
gponManagementAddrName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponManagementAddrEntry 1 }
-- 1.3.6.1.4.1.17409.2.2.12.3.1.1.2
gponManagementAddrTAddress OBJECT-TYPE
SYNTAX TAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION " "
::= { gponManagementAddrEntry 2 }
-- 1.3.6.1.4.1.17409.2.2.12.3.1.1.3
gponManagementAddrCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION " "
::= { gponManagementAddrEntry 3 }
-- 1.3.6.1.4.1.17409.2.2.12.3.1.1.4
gponManagementAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION " "
::= { gponManagementAddrEntry 4 }
-- DESCRIPTION
-- 1.3.6.1.4.1.17409.2.8
gponTree OBJECT IDENTIFIER ::= { nscrtvFTTxTree 8 }
-- 1.3.6.1.4.1.17409.2.8.3
gponPonPortObjects OBJECT IDENTIFIER ::= { gponTree 3 }
-- ------------------------------------------------------------------------------
-- gponPonPortObjects(1.3.6.1.4.1.17409.2.8.3)
-- ------------------------------------------------------------------------------
-- 1.3.6.1.4.1.17409.2.8.3.4
gponOnuAuthenticationModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponOnuAuthenticationModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponPonPortObjects 4 }
-- 1.3.6.1.4.1.17409.2.8.3.4.1
gponOnuAuthenticationModeEntry OBJECT-TYPE
SYNTAX GponOnuAuthenticationModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The gponOnuAuthenticationModeEntry Information"
INDEX { gponAuthenDeviceIndex, gponAuthenCardIndex, gponAuthenPortIndex }
::= { gponOnuAuthenticationModeTable 1 }
GponOnuAuthenticationModeEntry ::=
SEQUENCE {
gponAuthenDeviceIndex
INTEGER,
gponAuthenCardIndex
GponCardIndex,
gponAuthenPortIndex
GponPortIndex,
gponOnuAuthenMode
INTEGER,
gponAutoFindEnable
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.3.4.1.1
gponAuthenDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { gponOnuAuthenticationModeEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.3.4.1.2
gponAuthenCardIndex OBJECT-TYPE
SYNTAX GponCardIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponOnuAuthenticationModeEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.3.4.1.3
gponAuthenPortIndex OBJECT-TYPE
SYNTAX GponPortIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"pon"
::= { gponOnuAuthenticationModeEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.3.4.1.4
gponOnuAuthenMode OBJECT-TYPE
SYNTAX INTEGER
{
sn(1),
sn-pwd(2),
loid(3),
loid-pwd(4),
pwd(5),
auto(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authen mode;This is mode in authen"
::= { gponOnuAuthenticationModeEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.3.4.1.5
gponAutoFindEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AutoFindEnable."
DEFVAL { enable }
::= { gponOnuAuthenticationModeEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4
gponOnuObjects OBJECT IDENTIFIER ::= { gponTree 4 }
-- ------------------------------------------------------------------------------
-- gponOnuObjects(1.3.6.1.4.1.17409.2.8.4)
-- ------------------------------------------------------------------------------
-- 1.3.6.1.4.1.17409.2.8.4.1
gponOnuInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponOnuInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of gponOnuInfoTable entries. "
::= { gponOnuObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1
gponOnuInfoEntry OBJECT-TYPE
SYNTAX GponOnuInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The gponOnuInfoEntry Information"
INDEX { onuDeviceIndex }
::= { gponOnuInfoTable 1 }
GponOnuInfoEntry::=
SEQUENCE {
onuDeviceIndex
GponDeviceIndex,
onuName
DisplayString,
onuSerialNum
OCTET STRING,
onuType
INTEGER,
onuVendorID
OCTET STRING,
onuEquipmentID
OCTET STRING,
onuOperationStatus
INTEGER,
onuAdminStatus
INTEGER,
onuTestDistance
INTEGER,
resetONU
INTEGER,
onuDeactive
INTEGER,
onuTimeSinceLastRegister
Counter32,
onuSysUpTime
Counter32,
onuHardwareVersion
DisplayString,
onuPerfStats15minuteEnable
TruthValue,
onuPerfStats24hourEnable
TruthValue
}
-- 1.3.6.1.4.1.17409.2.8.4.1.1.1
onuDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"onuDevice Index"
::= { gponOnuInfoEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.2
onuName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"onu Name"
::= { gponOnuInfoEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.3
onuSerialNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU serial number."
::= { gponOnuInfoEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.4
onuType OBJECT-TYPE
SYNTAX INTEGER
{
fixed(1),
chassisBased(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"onu Type
fixed(1) - not slot concept
chassisBased(2) - port is indexed by coupling slot ID"
::= { gponOnuInfoEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.5
onuVendorID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU vendor id."
::= { gponOnuInfoEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.6
onuEquipmentID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ONU model id."
::= { gponOnuInfoEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.7
onuOperationStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"onu Operation Status"
::= { gponOnuInfoEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.8
onuAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"onu Admin Status"
::= { gponOnuInfoEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.9
onuTestDistance OBJECT-TYPE
SYNTAX INTEGER
UNITS "Meter"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"onu Test Distance"
::= { gponOnuInfoEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.10
resetONU OBJECT-TYPE
SYNTAX INTEGER { reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reset ONU"
::= { gponOnuInfoEntry 10 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.11
onuDeactive OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
deactive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponOnuInfoEntry 11 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.12
onuTimeSinceLastRegister OBJECT-TYPE
SYNTAX Counter32
UNITS "second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponOnuInfoEntry 12 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.13
onuSysUpTime OBJECT-TYPE
SYNTAX Counter32
UNITS "second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponOnuInfoEntry 13 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.14
onuHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponOnuInfoEntry 14 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.15
onuPerfStats15minuteEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponOnuInfoEntry 15 }
-- 1.3.6.1.4.1.17409.2.8.4.1.1.16
onuPerfStats24hourEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponOnuInfoEntry 16 }
-- 1.3.6.1.4.1.17409.2.8.4.2
onuInfoSoftwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnuInfoSoftwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponOnuObjects 2 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1
onuInfoSoftwareEntry OBJECT-TYPE
SYNTAX OnuInfoSoftwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { onuSoftwareDeviceIndex }
::= { onuInfoSoftwareTable 1 }
OnuInfoSoftwareEntry ::=
SEQUENCE {
onuSoftwareDeviceIndex
INTEGER,
onuSoftware0Version
DisplayString,
onuSoftware0Valid
INTEGER,
onuSoftware0Active
INTEGER,
onuSoftware0Commited
INTEGER,
onuSoftware1Version
DisplayString,
onuSoftware1Valid
INTEGER,
onuSoftware1Active
INTEGER,
onuSoftware1Commited
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.4.2.1.1
onuSoftwareDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.2
onuSoftware0Version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.3
onuSoftware0Valid OBJECT-TYPE
SYNTAX INTEGER
{
invalid(0),
valid(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.4
onuSoftware0Active OBJECT-TYPE
SYNTAX INTEGER
{
inactive(0),
active(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.5
onuSoftware0Commited OBJECT-TYPE
SYNTAX INTEGER
{
uncommitted(0),
committed(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.6
onuSoftware1Version OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.7
onuSoftware1Valid OBJECT-TYPE
SYNTAX INTEGER
{
invalid(0),
valid(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.8
onuSoftware1Active OBJECT-TYPE
SYNTAX INTEGER
{
inactive(0),
active(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.2.1.9
onuSoftware1Commited OBJECT-TYPE
SYNTAX INTEGER
{
uncommitted(0),
committed(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuInfoSoftwareEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.4.3
onuIpHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnuIpHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponOnuObjects 3 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1
onuIpHostEntry OBJECT-TYPE
SYNTAX OnuIpHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { onuIpHostDeviceIndex, onuIpHostIndex }
::= { onuIpHostTable 1 }
OnuIpHostEntry ::=
SEQUENCE {
onuIpHostDeviceIndex
INTEGER,
onuIpHostIndex
INTEGER,
onuIpHostAddressConfigMode
INTEGER,
onuIpHostAddress
IpAddress,
onuIpHostSubnetMask
IpAddress,
onuIpHostGateway
IpAddress,
onuIpHostPrimaryDNS
IpAddress,
onuIpHostSecondaryDNS
IpAddress,
onuIpHostVlanTagPriority
INTEGER,
onuIpHostVlanPvid
INTEGER,
onuIpHostMacAddress
MacAddress,
onuIpHostRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.4.3.1.1
onuIpHostDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.2
onuIpHostIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.3
onuIpHostAddressConfigMode OBJECT-TYPE
SYNTAX INTEGER
{
dhcp(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.4
onuIpHostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.5
onuIpHostSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.6
onuIpHostGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.7
onuIpHostPrimaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.8
onuIpHostSecondaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.9
onuIpHostVlanTagPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { 1 }
::= { onuIpHostEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.10
onuIpHostVlanPvid OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { 1 }
::= { onuIpHostEntry 10 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.11
onuIpHostMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 11 }
-- 1.3.6.1.4.1.17409.2.8.4.3.1.12
onuIpHostRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { onuIpHostEntry 12 }
-- 1.3.6.1.4.1.17409.2.8.4.4
gponOnuPonPortOpticalTransmissionPropertyTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponOnuPonPortOpticalTransmissionPropertyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table is designed for both OLT and ONU
Applied Obj - Descriptions of Index
------------------------------------------------------------------
OLT - OnuNum of GponDeviceIndex TC shall be set to 0,
onuPonPortOpticalTransmissionPropertyCardIndex, and
onuPonPortOpticalTransmissionPropertyPortIndex set to
65535 indicates meaningless
ONU - Set GponDeviceIndex TC to corresponding ONU ID,
onuPonPortOpticalTransmissionPropertyCardIndex, and
onuPonPortOpticalTransmissionPropertyPortIndex set to the
corresponding value
"
::= { gponOnuObjects 4 }
gponOnuPonPortOpticalTransmissionPropertyEntry OBJECT-TYPE
SYNTAX GponOnuPonPortOpticalTransmissionPropertyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The gponOnuPonPortOpticalTransmissionPropertyEntry Information"
INDEX { onuPonPortOpticalTransmissionPropertyDeviceIndex, onuPonPortOpticalTransmissionPropertyCardIndex,onuPonPortOpticalTransmissionPropertyPortIndex }
::={ gponOnuPonPortOpticalTransmissionPropertyTable 1 }
GponOnuPonPortOpticalTransmissionPropertyEntry ::= SEQUENCE {
onuPonPortOpticalTransmissionPropertyDeviceIndex GponDeviceIndex,
onuPonPortOpticalTransmissionPropertyCardIndex INTEGER,
onuPonPortOpticalTransmissionPropertyPortIndex INTEGER,
onuReceivedOpticalPower INTEGER,
onuTramsmittedOpticalPower INTEGER,
onuBiasCurrent INTEGER,
onuWorkingVoltage INTEGER,
onuWorkingTemperature INTEGER
}
onuPonPortOpticalTransmissionPropertyDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device Index of the ONU."
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 1 }
onuPonPortOpticalTransmissionPropertyCardIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Card Index in the ONU. Shall set to 0, if ONU is not a modulized
device"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 2 }
onuPonPortOpticalTransmissionPropertyPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Index in the Pon card of ONU"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 3 }
onuReceivedOpticalPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "centi-dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"received Optical Power"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 4 }
onuTramsmittedOpticalPower OBJECT-TYPE
SYNTAX INTEGER
UNITS "centi-dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tramsmitted Optical Power"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 5 }
onuBiasCurrent OBJECT-TYPE
SYNTAX INTEGER
UNITS "centi-mA"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"biasCurrent"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 6 }
onuWorkingVoltage OBJECT-TYPE
SYNTAX INTEGER
UNITS "centi-mV"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"onuworking Voltage"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 7 }
onuWorkingTemperature OBJECT-TYPE
SYNTAX INTEGER
UNITS "Centi-degree centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"working Temperature"
::= {gponOnuPonPortOpticalTransmissionPropertyEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.5
onuCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnuCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of onuInfoTable entries. "
::= { gponOnuObjects 5 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1
onuCapabilityEntry OBJECT-TYPE
SYNTAX OnuCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The onuCapabilityEntry Information"
INDEX { onuCapabilityDeviceIndex }
::= { onuCapabilityTable 1 }
OnuCapabilityEntry ::=
SEQUENCE {
onuCapabilityDeviceIndex
GponDeviceIndex,
onuOMCCVersion
INTEGER,
onuTotalEthNum
INTEGER,
onuTotalWlanNum
INTEGER,
onuTotalCatvNum
INTEGER,
onuTotalVeipNum
INTEGER,
onuIpHostNum
INTEGER,
onuTrafficMgmtOption
INTEGER,
onuTotalGEMPortNum
INTEGER,
onuTotalTContNum
INTEGER,
onuConnectCapbility
BITS,
onuQosFlexibility
BITS
}
-- 1.3.6.1.4.1.17409.2.8.4.5.1.1
onuCapabilityDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"onu Device Index"
::= { onuCapabilityEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.2
onuOMCCVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0x80 ITU-T G.984.4 (06/04)
NOTE \u9225\ufffdFor historical reasons, this code point may also appear in
ONUs that support later versions of [ITU-T G.984.4].
0x81 ITU-T G.984.4 2004 Amd.1 (06/05)
0x82 ITU-T G.984.4 2004 Amd.2 (03/06)
0x83 ITU-T G.984.4 2004 Amd.3 (12/06)
0x84 ITU-T G.984.4 2008 (02/08)
0x85 ITU-T G.984.4 2008 Amd.1 (06/09)
0x86 ITU-T G.984.4 2008 Amd.2 (2009).
Baseline message set only, without the extended message set option
0x96 ITU-T G.984.4 2008 Amd.2 (2009). Extended message set option, in addition to the baseline message set.54 Rec. ITU-T G.988 (10/2012)
0xA0 ITU-T G.988 (2010). Baseline message set only, without the extended message set option
0xA1 ITU-T G.988 Amd.1 (2011). Baseline message set only
0xA2 ITU-T G.988 Amd.2 (2012). Baseline message set only
0xA3 ITU-T G.988 (2012). Baseline message set only
0xB0 ITU-T G.988 (2010). Baseline and extended message set
0xB1 ITU-T G.988 Amd.1 (2011). Baseline and extended message set
0xB2 ITU-T G.988 Amd.2 (2012). Baseline and extended message set
0xB3 ITU-T G.988 (2012). Baseline and extended message set"
::= { onuCapabilityEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.3
onuTotalEthNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"gePort Bitmap
In slot+port pair list manner. Suppose each slot support up to 64 ports.
One octet to indentify slot and 8 octets to identify portbitmap for
the slot. The bitmap definition is internet sequence. The most left bit
is for port 1 of the slot, the most right bit is for port 64 of the slot.
If the slot cannot support 64 ports, set the bits of not supported ports
to 0.
If the port is GE port, set the corresponding bit to 1.
Since the slot num depends on each individual device, the object is variable
length. If the device is fixed box (not modulized), set the slot number to
255. Then the network management system could ignore the slot info.
It is not necessary to list the slot doesn't support GE port.
For example, if have 4 GE ports, of: 1/4, 1/6, 2/3, 4/17,
the object will be presented in:
01 14 00 00 00 00 00 00 00
02 20 00 00 00 00 00 00 00
04 00 00 80 00 00 00 00 00
Another example, for fixed box, if have 4 ge ports of 4,6,10,17, the object
will be presented as:
FF 14 40 10 00 00 00 00 "
::= { onuCapabilityEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.4
onuTotalWlanNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"fePort Num"
::= { onuCapabilityEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.5
onuTotalCatvNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { onuCapabilityEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.6
onuTotalVeipNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { onuCapabilityEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.7
onuIpHostNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { onuCapabilityEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.8
onuTrafficMgmtOption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"0: Priority controlled and flexibly scheduled upstream traffic.
1: Rate controlled upstream traffic.
2: Priority and rate controlled. "
::= { onuCapabilityEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.9
onuTotalGEMPortNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { onuCapabilityEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.10
onuTotalTContNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " "
::= { onuCapabilityEntry 10 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.11
onuConnectCapbility OBJECT-TYPE
SYNTAX BITS
{
nto1(0),
ntom(3),
ntop(5),
ntomp(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1 (LSB) N:1 bridging, Figure 8.2.2-3
2 1:M mapping, Figure 8.2.2-4
3 1:P filtering, Figure 8.2.2-5
4 N:M bridge-mapping, Figure 8.2.2-6
5 1:MP map-filtering, Figure 8.2.2-7
6 N:P bridge-filtering, Figure 8.2.2-8
7 N:MP bridge-map-filtering, Figure 8.2.2-9
8-16 Reserved"
::= { onuCapabilityEntry 11 }
-- 1.3.6.1.4.1.17409.2.8.4.5.1.12
onuQosFlexibility OBJECT-TYPE
SYNTAX BITS { priorityQueueME(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1 (LSB) Priority queue ME: Port field of related port attribute is read-write and
can point to any T-CONT or UNI port in the same slot
2 Priority queue ME: The traffic scheduler pointer is permitted to refer to
any other traffic scheduler in the same slot
3 Traffic scheduler ME: T-CONT pointer is read-write
4 Traffic scheduler ME: Policy attribute is read-write
5 T-CONT ME: Policy attribute is read-write
6 Priority queue ME: Priority field of related port attribute is read-write
7..16 Reserved"
::= { onuCapabilityEntry 12 }
-- 1.3.6.1.4.1.17409.2.8.4.6
onuAuthenticationManagement OBJECT-IDENTITY
STATUS current
DESCRIPTION
" "
::= { gponOnuObjects 6 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1
onuAuthenticationConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnuAuthenticationConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of onuAuthenticationPreConfigTable entries. "
::= { onuAuthenticationManagement 1 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1
onuAuthenticationConfigEntry OBJECT-TYPE
SYNTAX OnuAuthenticationConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The onuAuthenticationPreConfigEntry Information"
INDEX { onuAuthenOnuId }
::= { onuAuthenticationConfigTable 1 }
OnuAuthenticationConfigEntry ::=
SEQUENCE {
onuAuthenOnuId
INTEGER,
onuAuthenSN
OCTET STRING,
onuAuthenPassword
DisplayString,
onuAuthenLoid
DisplayString,
onuAuthenLoidPassword
DisplayString,
onuAuthenLineProfileId
INTEGER,
onuAuthenSrvProfileId
INTEGER,
onuAuthenRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.1
onuAuthenOnuId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"onu logical ID"
::= { onuAuthenticationConfigEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.2
onuAuthenSN OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"onu Mac Address"
::= { onuAuthenticationConfigEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.3
onuAuthenPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authen Action
This is optional in function"
::= { onuAuthenticationConfigEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.4
onuAuthenLoid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { onuAuthenticationConfigEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.5
onuAuthenLoidPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { onuAuthenticationConfigEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.6
onuAuthenLineProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { onuAuthenticationConfigEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.7
onuAuthenSrvProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { onuAuthenticationConfigEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.6.1.1.8
onuAuthenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"authen Row Status"
::= { onuAuthenticationConfigEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.7
onuAutoFindTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnuAutoFindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponOnuObjects 7 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1
onuAutoFindEntry OBJECT-TYPE
SYNTAX OnuAutoFindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { onuAutoFindOnuIndex }
::= { onuAutoFindTable 1 }
OnuAutoFindEntry ::=
SEQUENCE {
onuAutoFindOnuIndex
INTEGER,
onuAutoFindOnuType
DisplayString,
onuAutoFindSerialNumber
DisplayString,
onuAutoFindPassword
DisplayString,
onuAutoFindLoid
DisplayString,
onuAutoFindLoidPassword
DisplayString,
onuAutoFindTime
DateAndTime,
onuAutoFindSoftwareVersion
DisplayString,
onuAutoFindHardwareVersion
DisplayString
}
-- 1.3.6.1.4.1.17409.2.8.4.7.1.1
onuAutoFindOnuIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.2
onuAutoFindOnuType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.3
onuAutoFindSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.4
onuAutoFindPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.5
onuAutoFindLoid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.6
onuAutoFindLoidPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.7
onuAutoFindTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.8
onuAutoFindSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.7.1.9
onuAutoFindHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { onuAutoFindEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.4.8
onuAutoAuthenticationTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnuAutoAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponOnuObjects 8 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1
onuAutoAuthenticationEntry OBJECT-TYPE
SYNTAX OnuAutoAuthenticationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { onuAutoAuthenIndex }
::= { onuAutoAuthenticationTable 1 }
OnuAutoAuthenticationEntry ::=
SEQUENCE {
onuAutoAuthenIndex
INTEGER,
onuAutoAuthenPortlist
DisplayString,
onuAutoAuthenOnuType
DisplayString,
onuAutoAuthenEthNum
INTEGER,
onuAutoAuthenWlanNum
INTEGER,
onuAutoAuthenCatvNum
INTEGER,
onuAutoAuthenVeipNum
INTEGER,
onuAutoAuthenLineProfileId
INTEGER,
onuAutoAuthenSrvProfileId
INTEGER,
onuAutoAuthenRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.4.8.1.1
onuAutoAuthenIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.2
onuAutoAuthenPortlist OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.3
onuAutoAuthenOnuType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.4
onuAutoAuthenEthNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.5
onuAutoAuthenWlanNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.6
onuAutoAuthenCatvNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.7
onuAutoAuthenVeipNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.8
onuAutoAuthenLineProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.4.8.1.9
onuAutoAuthenSrvProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 9}
-- 1.3.6.1.4.1.17409.2.8.4.8.1.10
onuAutoAuthenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { onuAutoAuthenticationEntry 10 }
-- 1.3.6.1.4.1.17409.2.8.5
gponUniObjects OBJECT IDENTIFIER ::= { gponTree 5 }
-- ------------------------------------------------------------------------------
-- gponUniObjects(1.3.6.1.4.1.17409.2.8.5)
-- ------------------------------------------------------------------------------
-- 1.3.6.1.4.1.17409.2.8.5.1
ethAttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF EthAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of uniAttributeTable entries."
::= { gponUniObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1
ethAttributeEntry OBJECT-TYPE
SYNTAX EthAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The uniAttributeEntry Information"
INDEX { ethAttributeDeviceIndex, ethAttributeCardIndex, ethAttributePortIndex }
::= { ethAttributeTable 1 }
EthAttributeEntry ::=
SEQUENCE {
ethAttributeDeviceIndex
GponDeviceIndex,
ethAttributeCardIndex
GponCardIndex,
ethAttributePortIndex
GponPortIndex,
ethAdminStatus
INTEGER,
ethOperationStatus
INTEGER,
ethDuplexRate
INTEGER,
ethPerfStats15minuteEnable
TruthValue,
ethPerfStats24hourEnable
TruthValue
}
-- 1.3.6.1.4.1.17409.2.8.5.1.1.1
ethAttributeDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device Index
For OLT, set to corresponding ONU ID
For ONU, set to 0
"
::= { ethAttributeEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.2
ethAttributeCardIndex OBJECT-TYPE
SYNTAX GponCardIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Card Index
The value of this cardIndex depends on onuType.
fixed(1) - set to 0, to indicate slot num is meaningless.
chassisBased(2) - MUST NOT be zero
"
::= { ethAttributeEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.3
ethAttributePortIndex OBJECT-TYPE
SYNTAX GponPortIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Index"
::= { ethAttributeEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.4
ethAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin Status"
::= { ethAttributeEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.5
ethOperationStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operation Status"
::= { ethAttributeEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.6
ethDuplexRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { ethAttributeEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.7
ethPerfStats15minuteEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ethAttributeEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.5.1.1.8
ethPerfStats24hourEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION " "
::= { ethAttributeEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.6
gponIgmpManagementObjects OBJECT IDENTIFIER ::= { gponTree 6 }
--------------------------------------------------------------------------------
-- gponIgmpManagementObjects[IGMP(1.3.6.1.4.1.17409.2.8.6)
--------------------------------------------------------------------------------
gponOnuIgmpProfile OBJECT-IDENTITY
STATUS current
DESCRIPTION
"
ONU Profile"
::= { gponIgmpManagementObjects 4 }
gponOnuIgmpProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponOnuIgmpProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { gponOnuIgmpProfile 1 }
gponOnuIgmpProfileEntry OBJECT-TYPE
SYNTAX GponOnuIgmpProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { gponOnuIgmpProfileIndex }
::= { gponOnuIgmpProfileTable 1 }
GponOnuIgmpProfileEntry ::=
SEQUENCE {
gponOnuIgmpProfileIndex
INTEGER,
gponOnuIgmpProfileName
DisplayString,
gponOnuIgmpVersion
INTEGER,
gponOnuIgmpFunction
INTEGER,
gponOnuIgmpImmediateLeave
INTEGER,
gponOnuIgmpUpstreamProtoTCI
INTEGER,
gponOnuIgmpUpstreamProtoTagControl
INTEGER,
gponOnuIgmpUpstreamProtoRate
INTEGER,
gponOnuIgmpDynamicACL
INTEGER,
gponOnuIgmpStaticACL
INTEGER,
gponOnuIgmpRobustness
INTEGER,
gponOnuIgmpQueryInterval
INTEGER,
gponOnuIgmpQueryMaxResponseTime
INTEGER,
gponOnuIgmpLastMemberQueryInterval
INTEGER,
gponOnuIgmpUnautherizedJoin
INTEGER,
gponOnuIgmpDownstreamTCI
INTEGER,
gponOnuIgmpDownstreamTagControl
INTEGER,
gponOnuIgmpMaxRequestChannelNum
INTEGER,
gponOnuIgmpGlobalBW
INTEGER,
gponOnuIgmpRowStatus
RowStatus
}
gponOnuIgmpProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Profile"
::= { gponOnuIgmpProfileEntry 1 }
gponOnuIgmpProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Profile\u041e
"
::= { gponOnuIgmpProfileEntry 2 }
gponOnuIgmpVersion OBJECT-TYPE
SYNTAX INTEGER
{
igmp-v1(1),
igmp-v2(2),
igmp-v3(3)
--for future use ,mld-v1(16), mld-v2(17)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: IGMP version.
This attribute specifies the version of IGMP to be supported. Support of a
given version implies compatible support of previous versions.
"
::= { gponOnuIgmpProfileEntry 3 }
gponOnuIgmpFunction OBJECT-TYPE
SYNTAX INTEGER
{
snooping(1),
spr(2),
proxy(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: IGMP function.
This attribute enables an IGMP function. The value 1(value 0 in G.988) specifies transparent
IGMP snooping only. The value 2(value 1 in G.988) specifies snooping with proxy reporting(SPR);
the value 3(value 2 in G.988) specifies IGMP proxy. The function must be consistent
with the capabilities specified by the other IGMP configuration attributes.
"
::= { gponOnuIgmpProfileEntry 4 }
gponOnuIgmpImmediateLeave OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Immediate leave.
This Boolean attribute controls the immediate leave function. The value
false disables immediate leave; true enables immediate leave.
"
::= { gponOnuIgmpProfileEntry 5 }
gponOnuIgmpUpstreamProtoTCI OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Upstream IGMP TCI.
Under control of gponOnuIgmpUpstreamProtoTagControl(the upstream IGMP tag control attribute),
the upstream IGMP TCI attribute defines a VLAN ID and P-bits to add to upstream IGMP messages.
"
::= { gponOnuIgmpProfileEntry 6 }
gponOnuIgmpUpstreamProtoTagControl OBJECT-TYPE
SYNTAX INTEGER
{
pass-through(1),
add-vlan(2),
replace-tci(3),
replace-vlan(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Upstream IGMP tag control.
This attribute controls the upstream IGMP TCI attribute. If
this attribute is not pass-through, a possible extended VLAN tagging operation ME is
ignored for upstream frames containing IGMP/MLD packets.
Value Meaning
1 G.988 Value 0.
Pass upstream IGMP/MLD traffic transparently, neither
adding, stripping nor modifying tags that may be present.
2 G.988 Value 1.
Add a VLAN tag (including P bits) to upstream IGMP/MLD
traffic. The tag is specified by the upstream IGMP TCI
attribute.
3 G.988 Value 2.
Replace the entire TCI (VLAN ID plus P bits) on upstream
IGMP/MLD traffic. The new tag is specified by the upstream
IGMP/MLD TCI attribute. If the received IGMP/MLD traffic
is untagged, an add operation is performed.
4 G.988 Value 3.
Replace only the VLAN ID on upstream IGMP/MLD traffic,
retaining the original DEI and P bits. The new VLAN ID is
specified by the VLAN ID field of the upstream IGMP TCI
attribute. If the received IGMP/MLD traffic is untagged, an
add operation is performed, with DEI and P bits also taken
from the upstream IGMP TCI attribute.
"
DEFVAL { pass-through }
::= { gponOnuIgmpProfileEntry 7 }
gponOnuIgmpUpstreamProtoRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "pps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Upstream IGMP rate.
This attribute limits the maximum rate of upstream IGMP traffic.
Traffic in excess of this limit is silently discarded. The attribute value is
specified in messages/second. The recommended default value 0 imposes no
rate limit on this traffic.
"
DEFVAL { 0 }
::= { gponOnuIgmpProfileEntry 8 }
gponOnuIgmpDynamicACL OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
multicastACLIndex of gponOnuMulticastACLTable, refers to the list of multiple rules.
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table.
This attribute is a list that specifies one or more
multicast group address ranges. Groups defined in this
list are multicast on the associated UNI(s) which need
IGMP join, bandwidth measurement, and preview management.
0 for no DynamicACL
"
::= { gponOnuIgmpProfileEntry 9 }
gponOnuIgmpStaticACL OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
multicastACLIndex of gponOnuMulticastACLTable, refers to the list of multiple rules.
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Static access control list table.
This attribute is a list that specifies one or more multicast
group address ranges. Groups defined in this list are multicast on the
associated UNI(s) unconditionally, that is, without the need for an IGMP
join. The bandwidth of static multicast groups is not included in the current
multicast bandwidth measurement maintained by the multicast subscriber
monitor managed entity. If a join message is always expected, this table may
be empty. Table entries have the same format as those in the dynamic access
control list table. The preview fields are not meaningful.
0 for no StaticACL
"
DEFVAL { 0 }
::= { gponOnuIgmpProfileEntry 10 }
gponOnuIgmpRobustness OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Robustness.
This attribute allows tuning for possible packet loss in the network. The
recommended default value 0 causes the ONU to follow the IETF
recommendation [IETF RFC 3376] to copy the robustness value from query
messages originating further upstream.
"
DEFVAL { 0 }
::= { gponOnuIgmpProfileEntry 11 }
gponOnuIgmpQueryInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Query interval.
This attribute specifies the interval between general queries in seconds. The
value 0 specifies that the ONU use its own default, which may or may not be
the same as the recommended default of 125 seconds.
"
DEFVAL { 125 }
::= { gponOnuIgmpProfileEntry 12 }
gponOnuIgmpQueryMaxResponseTime OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.1 seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Query max response time.
This attribute is the max response time added by the proxy into
general query messages directed to UNIs. It is expressed in tenths of seconds.
The value 0 specifies that the ONU use its own default, which may or may
not be the same as the recommended default of 100 (10 seconds).
"
DEFVAL { 100 }
::= { gponOnuIgmpProfileEntry 13 }
gponOnuIgmpLastMemberQueryInterval OBJECT-TYPE
SYNTAX INTEGER
UNITS "0.1 seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Last member query interval.
This attribute specifies the max response time inserted into
group-specific queries sent to UNIs in response to group leave messages. It is
also the repetition rate of [robustness] transmissions of the query. It is
specified in tenths of seconds, with a default of 10 (1 second).
"
DEFVAL { 10 }
::= { gponOnuIgmpProfileEntry 14 }
gponOnuIgmpUnautherizedJoin OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Unauthorized join request behaviour.
This Boolean attribute specifies the ONU's
behaviour when it receives an IGMP join request for a group that is not
authorized in the dynamic address control list table, or an IGMPv3
membership report for groups, none of which are authorized in the dynamic
ACL. The default value false specifies that the ONU silently discard the
IGMP request; the value true specifies that the ONU forwards the request
upstream. The ONU does not attempt to honour the request for the
unauthorized group(s) in either case.
"
DEFVAL { false }
::= { gponOnuIgmpProfileEntry 15 }
gponOnuIgmpDownstreamTCI OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Downstream IGMP and multicast TCI(last two bytes).
Under control of gponOnuIgmpDownstreamTagControl(first byte of Downstream IGMP and multicast TCI attribute),
the downstream IGMP TCI attribute defines a VLAN ID and P-bits to add to both the IGMP/MLD and multicast frames.
"
::= { gponOnuIgmpProfileEntry 16 }
gponOnuIgmpDownstreamTagControl OBJECT-TYPE
SYNTAX INTEGER
{
pass-through(1),
strip-vlan(2),
add-vlan(3),
replace-tci(4),
replace-vlan(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Downstream IGMP and multicast TCI(first byte).
This attribute controls the downstream tagging of
both the IGMP/MLD and multicast frames. If this attribute is
not 1, a possible extended VLAN tagging operation ME is ignored for
downstream IGMP/MLD and multicast frames.
Value Meaning
1 G.988 Value 0
Pass the downstream IGMP/MLD and multicast traffic
transparently, neither stripping nor modifying tags that may be
present.
2 G.988 Value 1
Strip the outer VLAN tag (including P bits) from the
downstream IGMP/MLD and multicast traffic.
3 G.988 Value 2
Add a tag onto the downstream IGMP/MLD and multicast
traffic. The new tag is specified by gponOnuIgmpDownstreamTagControl.
4 G.988 Value 3
Replace the tag on the downstream IGMP/MLD and multicast
traffic. The new tag is specified by gponOnuIgmpDownstreamTagControl.
5 G.988 Value 4
Replace only the VLAN ID on the downstream IGMP/MLD
and multicast traffic, retaining the original DEI and P bits. The
new VLAN ID is specified by gponOnuIgmpDownstreamTagControl.
"
DEFVAL { pass-through }
::= { gponOnuIgmpProfileEntry 17 }
gponOnuIgmpMaxRequestChannelNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.28 Multicast subscriber config info, Attribute: Max simultaneous groups.
This attribute specifies the maximum number of dynamic
multicast groups that may be replicated to the client port at any one time. The
recommended default value 0 specifies that no administrative limit is to be
imposed.
"
DEFVAL { 0 }
::= { gponOnuIgmpProfileEntry 18 }
gponOnuIgmpGlobalBW OBJECT-TYPE
SYNTAX INTEGER
UNITS "Bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.28 Multicast subscriber config info, Attribute: Max multicast bandwidth.
This attribute specifies the maximum imputed dynamic
bandwidth, in bytes per second, that may be delivered to the client port at any
one time. The recommended default value 0 specifies that no administrative
limit is to be imposed.
G.988 'Bandwidth enforcement' attribute should be set to TRUE when the bandwidth value is not 0.
"
DEFVAL { 0 }
::= { gponOnuIgmpProfileEntry 19 }
gponOnuIgmpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { gponOnuIgmpProfileEntry 20 }
gponOnuMulticastACLTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponOnuMulticastACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
ONU \u7f01\u52ec\u6331\u93c9\u51ae\u6aba\u741b\ufffd"
::= { gponOnuIgmpProfile 2 }
gponOnuMulticastACLEntry OBJECT-TYPE
SYNTAX GponOnuMulticastACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { multicastACLIndex, multicastACLIndex }
::= { gponOnuMulticastACLTable 1 }
GponOnuMulticastACLEntry ::=
SEQUENCE {
multicastACLIndex
INTEGER,
multicastACLRuleIndex
INTEGER,
multicastACLRuleName
DisplayString,
vlanID
INTEGER,
sourceIpAddress
IpAddress,
destinationIpAddressStart
IpAddress,
destinationIpAddressEnd
IpAddress,
previewLenAndAuthority
INTEGER,
previewRepeatTime
INTEGER,
previewResetTime
INTEGER,
previewCount
INTEGER,
imputedGroupBandwidth
INTEGER,
multicastACLRuleStatus
RowStatus
}
multicastACLIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
\u7f01\u52ec\u6331\u93c9\u51ae\u6aba\u95c6\u55d9\u50a8\u5bee\ufffd"
::= { gponOnuMulticastACLEntry 1 }
multicastACLRuleIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
\u7f01\u52ec\u6331\u93c9\u51ae\u6aba\u7459\u52eb\u57af\u7ef1\u3220\u7d29"
::= { gponOnuMulticastACLEntry 2 }
multicastACLRuleName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
\u7459\u52eb\u57af\u935a\u5d85\u74e7"
::= { gponOnuMulticastACLEntry 3 }
vlanID OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ VLAN ID (ANI) ]
This field specifies the VLAN carrying the multicast group downstream.
The value 0 designates an untagged downstream flow.
"
::= { gponOnuMulticastACLEntry 4 }
sourceIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Source IP address ]
The value 0.0.0.0 specifies that the source IP address is to be ignored.
"
::= { gponOnuMulticastACLEntry 5 }
destinationIpAddressStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table
[ Destination IP address of the start of the multicast range ]
"
::= { gponOnuMulticastACLEntry 6 }
destinationIpAddressEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table
[ Destination IP address of the end of the multicast range ]
"
::= { gponOnuMulticastACLEntry 7 }
previewLenAndAuthority OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview length ]
The maximum duration of each preview in seconds.
The value 0 designates a group that is fully authorized by subscription
and is not subject to preview restrictions. The remaining preview
attributes in this row part are ignored.
"
::= { gponOnuMulticastACLEntry 8 }
previewRepeatTime OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview repeat time ]
The minimum time in seconds between two previews of a given multicast group.
"
::= { gponOnuMulticastACLEntry 9 }
previewResetTime OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview reset time ]
The time at which the ONU resets the preview
repeat counter. The value assignments are as follows:
1..24: The integer clock time at which the ONU resets the preview
repeat counter. For example the value 2 resets the counter at
2:00 AM. If the ONU does not have a time of day clock, the
preview repeat counter is reset every 24 hours at an
indeterminate time selected by the ONU.
other values are reserved
"
::= { gponOnuMulticastACLEntry 10 }
previewCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Preview repeat count ]
The maximum number of times a given multicast group
may be previewed. A value of zero allows an unlimited
number of previews.
"
::= { gponOnuMulticastACLEntry 11 }
imputedGroupBandwidth OBJECT-TYPE
SYNTAX INTEGER
UNITS "Bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.27 Multicast operations profile, Attribute: Dynamic access control list table[ Imputed group bandwidth ]
Expressed in bytes per second, the
imputed group bandwidth is used to decide whether or not to honour a
join request in the presence of a max multicast bandwidth limit. The
recommended default value 0 effectively allows this table entry to
avoid max bandwidth limitations.
"
::= { gponOnuMulticastACLEntry 12 }
multicastACLRuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
\u741b\u5c80\u59f8\u93ac\ufffd"
::= { gponOnuMulticastACLEntry 13 }
gponIgmpOnuUniTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponIgmpOnuUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of gponIgmpOnuUniTable entries. "
::= { gponIgmpManagementObjects 5 }
gponIgmpOnuUniEntry OBJECT-TYPE
SYNTAX GponIgmpOnuUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The gponIgmpOnuUniEntry Information"
INDEX { gponUniDeviceIndex, gponUniCardIndex, gponUniPortIndex }
::={ gponIgmpOnuUniTable 1 }
GponIgmpOnuUniEntry::= SEQUENCE {
gponUniDeviceIndex
GponDeviceIndex,
gponUniCardIndex
GponCardIndex,
gponUniPortIndex
GponPortIndex,
gponUniIgmpProfileIndex
INTEGER,
gponUniRowstatus
RowStatus
}
gponUniDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"\u7481\u60e7\ue638\u7ef1\u3220\u7d29 "
::= { gponIgmpOnuUniEntry 1 }
gponUniCardIndex OBJECT-TYPE
SYNTAX GponCardIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"\u93c9\u57ae\u5d31\u7ef1\u3220\u7d29"
::= { gponIgmpOnuUniEntry 2 }
gponUniPortIndex OBJECT-TYPE
SYNTAX GponPortIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"\u7ed4\ue21a\u5f5b\u7ef1\u3220\u7d29"
::= { gponIgmpOnuUniEntry 3 }
gponUniIgmpProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gponOnuIgmpProfileTable\u7ef1\u3220\u7d29"
::= { gponIgmpOnuUniEntry 4 }
gponUniRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"\u741b\u5c80\u59f8\u93ac\ufffd"
::= { gponIgmpOnuUniEntry 5 }
igmpOnuMulticastInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpOnuMulticastInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
A list of igmpOnuMulticastInfoTable entries.
G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table
"
::= { gponIgmpManagementObjects 6 }
igmpOnuMulticastInfoEntry OBJECT-TYPE
SYNTAX IgmpOnuMulticastInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The igmpOnuUniEntry Information"
INDEX { onuMcInfoDeviceIndex,onuMcInfoCardIndex,onuMcInfoPortIndex,onuMcInfoIndex }
::={ igmpOnuMulticastInfoTable 1 }
IgmpOnuMulticastInfoEntry::= SEQUENCE {
onuMcInfoDeviceIndex
GponDeviceIndex,
onuMcInfoCardIndex
GponCardIndex,
onuMcInfoPortIndex
GponPortIndex,
onuMcInfoIndex
INTEGER,
onuMcInfoSrcIp
IpAddress,
onuMcInfoMcDstIp
IpAddress,
onuMcInfoMvlanVid
INTEGER,
onuMcInfoClientIp
IpAddress
}
onuMcInfoDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"\u7481\u60e7\ue638\u7ef1\u3220\u7d29 "
::= { igmpOnuMulticastInfoEntry 1 }
onuMcInfoCardIndex OBJECT-TYPE
SYNTAX GponCardIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"\u93c9\u57ae\u5d31\u7ef1\u3220\u7d29"
::= { igmpOnuMulticastInfoEntry 2 }
onuMcInfoPortIndex OBJECT-TYPE
SYNTAX GponPortIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"\u7ed4\ue21a\u5f5b\u7ef1\u3220\u7d29"
::= { igmpOnuMulticastInfoEntry 3 }
onuMcInfoIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"\u7f01\u52ec\u6331\u93c9\uff04\u6d30\u7ef1\u3220\u7d29"
::= { igmpOnuMulticastInfoEntry 4 }
onuMcInfoSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table
Source IP address, 0.0.0.0 if not used
"
::= { igmpOnuMulticastInfoEntry 5 }
onuMcInfoMcDstIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table
Multicast destination IP address
"
::= { igmpOnuMulticastInfoEntry 6 }
onuMcInfoMvlanVid OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table
VLAN ID, 0 if not used
"
::= { igmpOnuMulticastInfoEntry 7 }
onuMcInfoClientIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
G.988-201210: 9.3.29 Multicast subscriber monitor, Attribute: IPv4 active group list table
Client (set-top box) IP address, that is, the IP address of the device currently joined.
"
::= { igmpOnuMulticastInfoEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.10
gponPerformanceStatisticObjects OBJECT IDENTIFIER ::= { gponTree 10 }
-- ------------------------------------------------------------------------------
-- gponPerformanceStatisticObjects(1.3.6.1.4.1.17409.2.8.10)
-- ------------------------------------------------------------------------------
-- 1.3.6.1.4.1.17409.2.8.10.5
gponPerfStatsThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponPerfStatsThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponPerformanceStatisticObjects 5 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1
gponPerfStatsThresholdEntry OBJECT-TYPE
SYNTAX GponPerfStatsThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
INDEX { gponPerfStatsThresholdDeviceIndex, gponPerfStatsThresholdCardIndex, gponPerfStatsThresholdPortIndex, gponPerfStatsThresholdTypeIndex }
::= { gponPerfStatsThresholdTable 1 }
GponPerfStatsThresholdEntry ::=
SEQUENCE {
gponPerfStatsThresholdDeviceIndex
GponDeviceIndex,
gponPerfStatsThresholdCardIndex
GponCardIndex,
gponPerfStatsThresholdPortIndex
GponPortIndex,
gponPerfStatsThresholdTypeIndex
GponStatsThresholdType,
gponPerfStatsThresholdUpper
Counter64,
gponPerfStatsThresholdLower
Counter64,
gponPerfStatsThresholdRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.10.5.1.1
gponPerfStatsThresholdDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponPerfStatsThresholdEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1.2
gponPerfStatsThresholdCardIndex OBJECT-TYPE
SYNTAX GponCardIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponPerfStatsThresholdEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1.3
gponPerfStatsThresholdPortIndex OBJECT-TYPE
SYNTAX GponPortIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
::= { gponPerfStatsThresholdEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1.4
gponPerfStatsThresholdTypeIndex OBJECT-TYPE
SYNTAX GponStatsThresholdType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"\u95c2\u3129\u6aba\u7eeb\u8bf2\u7037\u951b\ufffd
1\u9286\u4e1fponStatsThresholdType\u6d93\u8861\ufffd50 Temperature\u9225\u6fc7\u4fef\u6434\ufe3d\u6902\u951b\u5c7d\u5d1f\u6d63\u5d86\u69f8\u93bd\u52ec\u76ac\u6434\ufe3c\u7d1d\u934b\u5fd5\u0429\u95b2\ufffd100\u951b\u5c7e\u762e\u6fe1\u509e\u68ec\u95c4\u612f\ue195\u7f03\ue1bb\u8d1f75\u93bd\u52ec\u76ac\u6434\ufe3c\u7d1d\u7039\u70ba\u6aaf\u93c4\ufffd25\u93bd\u52ec\u76ac\u6434\ufe3d\u6f75\u6769\u6d9c\ue511\u59e3\u65c7\u7ddd\u9352\u3085\u757e\u951b\ufffd
2\u9286\u4e1fponStatsThresholdType\u6d93\u8861\ufffd51 Voltage\u9225\u6fc7\u4fef\u6434\ufe3d\u6902\u951b\u5c7d\u5d1f\u6d63\u5d86\u69f8\u9225\u6e03enti-mv\u9225\u6fd3\u7d31
3\u9286\u4e1fponStatsThresholdType\u6d93\u8861\ufffd52 TXPower\u9225\u6fc6\u62f0\u9225\ufffd3 RXPower\u9225\u6fc7\u6902\u951b\u5c7d\u5d1f\u6d63\u5d86\u69f8centi-dBuV "
::= { gponPerfStatsThresholdEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1.5
gponPerfStatsThresholdUpper OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
\u95c3\u581d\ufffd\u6d93\u5a47\u6aba
"
::= { gponPerfStatsThresholdEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1.6
gponPerfStatsThresholdLower OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
\u95c3\u581d\ufffd\u6d93\u5b2e\u6aba "
::= { gponPerfStatsThresholdEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.10.5.1.7
gponPerfStatsThresholdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION " "
::= { gponPerfStatsThresholdEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.10.6
curStatsGemPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CurStatsGemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponPerformanceStatisticObjects 6 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1
curStatsGemPortEntry OBJECT-TYPE
SYNTAX CurStatsGemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { curStatsGemPortDeviceIndex, curStatsGemPortIndex }
::= { curStatsGemPortTable 1 }
CurStatsGemPortEntry ::=
SEQUENCE {
curStatsGemPortDeviceIndex
GponDeviceIndex,
curStatsGemPortIndex
INTEGER,
curStatsGemPortOutGemFrames
Counter64,
curStatsGemPortInGemFrames
Counter64,
curStatsGemPortOutBytes
Counter64,
curStatsGemPortInBytes
Counter64,
curStatsGemPortStatusAndAction
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.10.6.1.1
curStatsGemPortDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1.2
curStatsGemPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1.3
curStatsGemPortOutGemFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1.4
curStatsGemPortInGemFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1.5
curStatsGemPortOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1.6
curStatsGemPortInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.10.6.1.7
curStatsGemPortStatusAndAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
cleandata(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { curStatsGemPortEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.10.7
stats15GemPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Stats15GemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponPerformanceStatisticObjects 7 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1
stats15GemPortEntry OBJECT-TYPE
SYNTAX Stats15GemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { stats15GemPortDeviceIndex, stats15GemPortIndex, stats15GemPortStatIndex }
::= { stats15GemPortTable 1 }
Stats15GemPortEntry ::=
SEQUENCE {
stats15GemPortDeviceIndex
GponDeviceIndex,
stats15GemPortIndex
INTEGER,
stats15GemPortStatIndex
GponStats15MinRecordType,
stats15GemPortOutGemFrames
Counter64,
stats15GemPortInGemFrames
Counter64,
stats15GemPortOutBytes
Counter64,
stats15GemPortInBytes
Counter64,
stats15GemPortStatusAndAction
INTEGER,
stats15GemPortValidityTag
TruthValue,
stats15GemPortElapsedTime
Counter32,
stats15GemPortEndTime
DateAndTime
}
-- 1.3.6.1.4.1.17409.2.8.10.7.1.1
stats15GemPortDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.2
stats15GemPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.3
stats15GemPortStatIndex OBJECT-TYPE
SYNTAX GponStats15MinRecordType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.4
stats15GemPortOutGemFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.5
stats15GemPortInGemFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.6
stats15GemPortOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.7
stats15GemPortInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.8
stats15GemPortStatusAndAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
cleandata(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.9
stats15GemPortValidityTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.10
stats15GemPortElapsedTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 10 }
-- 1.3.6.1.4.1.17409.2.8.10.7.1.11
stats15GemPortEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats15GemPortEntry 11 }
-- 1.3.6.1.4.1.17409.2.8.10.8
stats24GemPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Stats24GemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponPerformanceStatisticObjects 8 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1
stats24GemPortEntry OBJECT-TYPE
SYNTAX Stats24GemPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { stats24GemPortDeviceIndex, stats24GemPortIndex, stats24GemPortStatIndex }
::= { stats24GemPortTable 1 }
Stats24GemPortEntry ::=
SEQUENCE {
stats24GemPortDeviceIndex
GponDeviceIndex,
stats24GemPortIndex
INTEGER,
stats24GemPortStatIndex
GponStats24HourRecordType,
stats24GemPortOutGemFrames
Counter64,
stats24GemPortInGemFrames
Counter64,
stats24GemPortOutBytes
Counter64,
stats24GemPortInBytes
Counter64,
stats24GemPortStatusAndAction
INTEGER,
stats24GemPortValidityTag
TruthValue,
stats24GemPortElapsedTime
Counter32,
stats24GemPortEndTime
DateAndTime
}
-- 1.3.6.1.4.1.17409.2.8.10.8.1.1
stats24GemPortDeviceIndex OBJECT-TYPE
SYNTAX GponDeviceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.2
stats24GemPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.3
stats24GemPortStatIndex OBJECT-TYPE
SYNTAX GponStats24HourRecordType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.4
stats24GemPortOutGemFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.5
stats24GemPortInGemFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.6
stats24GemPortOutBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.7
stats24GemPortInBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.8
stats24GemPortStatusAndAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
cleandata(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.9
stats24GemPortValidityTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.10
stats24GemPortElapsedTime OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 10 }
-- 1.3.6.1.4.1.17409.2.8.10.8.1.11
stats24GemPortEndTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { stats24GemPortEntry 11 }
-- 1.3.6.1.4.1.17409.2.8.6
gponProfileObjects OBJECT IDENTIFIER ::= { gponTree 11 }
-- 1.3.6.1.4.1.17409.2.8.11.1
gponDbaProfileObjects OBJECT IDENTIFIER ::= { gponProfileObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1
gponDbaProfileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponDbaProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1
gponDbaProfileInfoEntry OBJECT-TYPE
SYNTAX GponDbaProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponDbaProfileId }
::= { gponDbaProfileInfoTable 1 }
GponDbaProfileInfoEntry ::=
SEQUENCE {
gponDbaProfileId
INTEGER,
gponDbaProfileName
DisplayString,
gponDbaProfileType
INTEGER,
gponDbaProfileFixRate
INTEGER,
gponDbaProfileAssureRate
INTEGER,
gponDbaProfileMaxRate
INTEGER,
gponDbaProfileBindNum
INTEGER,
gponDbaProfileRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.1
gponDbaProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.2
gponDbaProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.3
gponDbaProfileType OBJECT-TYPE
SYNTAX INTEGER
{
fix(1),
assure(2),
assureAndMax(3),
max(4),
fixAndAssureAndMax(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.4
gponDbaProfileFixRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "kbit/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.5
gponDbaProfileAssureRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "kbit/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.6
gponDbaProfileMaxRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "kbit/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.7
gponDbaProfileBindNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.11.1.1.1.8
gponDbaProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponDbaProfileInfoEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.11.2
gponLineProfileObjects OBJECT IDENTIFIER ::= { gponProfileObjects 2 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1
gponLineProfileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponLineProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1
gponLineProfileInfoEntry OBJECT-TYPE
SYNTAX GponLineProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponLineProfileId }
::= { gponLineProfileInfoTable 1 }
GponLineProfileInfoEntry ::=
SEQUENCE {
gponLineProfileId
INTEGER,
gponLineProfileName
DisplayString,
gponLineProfileUpstreamFECMode
INTEGER,
gponLineProfileMappingMode
INTEGER,
gponLineProfileTcontNum
INTEGER,
gponLineProfileGemNum
INTEGER,
gponLineProfileBindNum
INTEGER,
gponLineProfileRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.1
gponLineProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.2
gponLineProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.3
gponLineProfileUpstreamFECMode OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { off }
::= { gponLineProfileInfoEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.4
gponLineProfileMappingMode OBJECT-TYPE
SYNTAX INTEGER
{
vlan(1),
priority(2),
vlan-priority(3),
port(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.5
gponLineProfileTcontNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.6
gponLineProfileGemNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.7
gponLineProfileBindNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.11.2.1.1.8
gponLineProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileInfoEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.11.2.2
gponLineProfileTcontTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponLineProfileTcontEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileObjects 2 }
-- 1.3.6.1.4.1.17409.2.8.11.2.2.1
gponLineProfileTcontEntry OBJECT-TYPE
SYNTAX GponLineProfileTcontEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponLineProfileTcontProfileIndex, gponLineProfileTcontIndex }
::= { gponLineProfileTcontTable 1 }
GponLineProfileTcontEntry ::=
SEQUENCE {
gponLineProfileTcontProfileIndex
INTEGER,
gponLineProfileTcontIndex
INTEGER,
gponLineProfileTcontDbaProfileId
INTEGER,
gponLineProfileTcontRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.2.2.1.1
gponLineProfileTcontProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileTcontEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.2.2.1.2
gponLineProfileTcontIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileTcontEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.2.2.1.3
gponLineProfileTcontDbaProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileTcontEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.2.2.1.4
gponLineProfileTcontRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileTcontEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3
gponLineProfileGemTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponLineProfileGemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileObjects 3 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1
gponLineProfileGemEntry OBJECT-TYPE
SYNTAX GponLineProfileGemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponLineProfileGemProfileIndex, gponLineProfileGemIndex }
::= { gponLineProfileGemTable 1 }
GponLineProfileGemEntry ::=
SEQUENCE {
gponLineProfileGemProfileIndex
INTEGER,
gponLineProfileGemIndex
INTEGER,
gponLineProfileGemEncrypt
INTEGER,
gponLineProfileGemTcontId
INTEGER,
gponLineProfileGemQueuePri
INTEGER,
gponLineProfileGemUpCar
INTEGER,
gponLineProfileGemDownCar
INTEGER,
gponLineProfileGemMapNum
INTEGER,
gponLineProfileGemRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.1
gponLineProfileGemProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.2
gponLineProfileGemIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.3
gponLineProfileGemEncrypt OBJECT-TYPE
SYNTAX INTEGER
{
unconcern(0),
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.4
gponLineProfileGemTcontId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.5
gponLineProfileGemQueuePri OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
DEFVAL { 0 }
::= { gponLineProfileGemEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.6
gponLineProfileGemUpCar OBJECT-TYPE
SYNTAX INTEGER (0 | 1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern"
::= { gponLineProfileGemEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.7
gponLineProfileGemDownCar OBJECT-TYPE
SYNTAX INTEGER (0 | 1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern"
::= { gponLineProfileGemEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.8
gponLineProfileGemMapNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.11.2.3.1.9
gponLineProfileGemRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemEntry 9 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4
gponLineProfileGemMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponLineProfileGemMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileObjects 4 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1
gponLineProfileGemMapEntry OBJECT-TYPE
SYNTAX GponLineProfileGemMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponLineProfileGemMapProfileIndex, gponLineProfileGemMapGemIndex, gponLineProfileGemMapIndex }
::= { gponLineProfileGemMapTable 1 }
GponLineProfileGemMapEntry ::=
SEQUENCE {
gponLineProfileGemMapProfileIndex
INTEGER,
gponLineProfileGemMapGemIndex
INTEGER,
gponLineProfileGemMapIndex
INTEGER,
gponLineProfileGemMapVlan
INTEGER,
gponLineProfileGemMapPriority
INTEGER,
gponLineProfileGemMapPortType
INTEGER,
gponLineProfileGemMapPortId
INTEGER,
gponLineProfileGemMapRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.1
gponLineProfileGemMapProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.2
gponLineProfileGemMapGemIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.3
gponLineProfileGemMapIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.4
gponLineProfileGemMapVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.5
gponLineProfileGemMapPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.6
gponLineProfileGemMapPortType OBJECT-TYPE
SYNTAX INTEGER
{
eth(1),
iphost(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.7
gponLineProfileGemMapPortId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.11.2.4.1.8
gponLineProfileGemMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponLineProfileGemMapEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.11.3
gponSrvProfileObjects OBJECT IDENTIFIER ::= { gponProfileObjects 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.1
gponSrvProfileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.1.1
gponSrvProfileInfoEntry OBJECT-TYPE
SYNTAX GponSrvProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfileId }
::= { gponSrvProfileInfoTable 1 }
GponSrvProfileInfoEntry ::=
SEQUENCE {
gponSrvProfileId
INTEGER,
gponSrvProfileName
DisplayString,
gponSrvProfileBindNum
INTEGER,
gponSrvProfileRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.3.1.1.1
gponSrvProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileInfoEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.1.1.2
gponSrvProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileInfoEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.1.1.3
gponSrvProfileBindNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileInfoEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.1.1.4
gponSrvProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileInfoEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.2
gponSrvProfileCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfileCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileObjects 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.2.1
gponSrvProfileCfgEntry OBJECT-TYPE
SYNTAX GponSrvProfileCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfileIndex }
::= { gponSrvProfileCfgTable 1 }
GponSrvProfileCfgEntry ::=
SEQUENCE {
gponSrvProfileIndex
INTEGER,
gponSrvProfileMacLearning
INTEGER,
gponSrvProfileMacAgeSeconds
INTEGER,
gponSrvProfileLoopbackDetectCheck
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.11.3.2.1.1
gponSrvProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileCfgEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.2.1.2
gponSrvProfileMacLearning OBJECT-TYPE
SYNTAX INTEGER
{
unconcern(0),
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileCfgEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.2.1.3
gponSrvProfileMacAgeSeconds OBJECT-TYPE
SYNTAX INTEGER (-1 | 0 | 10..1000000)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern;
-1:unlimited;
10-1000000:\u7039\u70ba\u6aaf\u9470\u4f78\u5bf2\u93c3\u5815\u68ff "
::= { gponSrvProfileCfgEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.2.1.4
gponSrvProfileLoopbackDetectCheck OBJECT-TYPE
SYNTAX INTEGER
{
unconcern(0),
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileCfgEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.3
gponSrvProfilePortNumTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfilePortNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileObjects 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.3.1
gponSrvProfilePortNumEntry OBJECT-TYPE
SYNTAX GponSrvProfilePortNumEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfilePortNumProfileIndex }
::= { gponSrvProfilePortNumTable 1 }
GponSrvProfilePortNumEntry ::=
SEQUENCE {
gponSrvProfilePortNumProfileIndex
INTEGER,
gponSrvProfileEthNum
INTEGER,
gponSrvProfileCatvNum
INTEGER,
gponSrvProfileWlanNum
INTEGER,
gponSrvProfileVeipNum
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.11.3.3.1.1
gponSrvProfilePortNumProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortNumEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.3.1.2
gponSrvProfileEthNum OBJECT-TYPE
SYNTAX INTEGER (-1 | 0..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" -1:adaptive ,
0-24:port num"
::= { gponSrvProfilePortNumEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.3.1.3
gponSrvProfileCatvNum OBJECT-TYPE
SYNTAX INTEGER (-1 | 0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"-1:adaptive , 0-2:port num"
::= { gponSrvProfilePortNumEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.3.1.4
gponSrvProfileWlanNum OBJECT-TYPE
SYNTAX INTEGER (-1 | 0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"-1:adaptive, 0-2:port num"
::= { gponSrvProfilePortNumEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.3.1.5
gponSrvProfileVeipNum OBJECT-TYPE
SYNTAX INTEGER (-1 | 0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" -1:adaptive , 0-8:port num"
::= { gponSrvProfilePortNumEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4
gponSrvProfileEthPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfileEthPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileObjects 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1
gponSrvProfileEthPortConfigEntry OBJECT-TYPE
SYNTAX GponSrvProfileEthPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfileEthPortProfileIndex, gponSrvProfileEthPortIdIndex }
::= { gponSrvProfileEthPortConfigTable 1 }
GponSrvProfileEthPortConfigEntry ::=
SEQUENCE {
gponSrvProfileEthPortProfileIndex
INTEGER,
gponSrvProfileEthPortIdIndex
INTEGER,
gponSrvProfileEthPortMacLimited
INTEGER,
gponSrvProfileEthPortMtu
INTEGER,
gponSrvProfileEthPortFlowCtrl
INTEGER,
gponSrvProfileEthPortInTrafficProfileId
INTEGER,
gponSrvProfileEthPortOutTrafficProfileId
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.1
gponSrvProfileEthPortProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileEthPortConfigEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.2
gponSrvProfileEthPortIdIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileEthPortConfigEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.3
gponSrvProfileEthPortMacLimited OBJECT-TYPE
SYNTAX INTEGER (-1 | 0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"-1:unconcern,
0:unlimited"
::= { gponSrvProfileEthPortConfigEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.4
gponSrvProfileEthPortMtu OBJECT-TYPE
SYNTAX INTEGER (0 | 1518..2000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern"
::= { gponSrvProfileEthPortConfigEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.5
gponSrvProfileEthPortFlowCtrl OBJECT-TYPE
SYNTAX INTEGER
{
unconcern(0),
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfileEthPortConfigEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.6
gponSrvProfileEthPortInTrafficProfileId OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern"
::= { gponSrvProfileEthPortConfigEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.3.4.1.7
gponSrvProfileEthPortOutTrafficProfileId OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern"
::= { gponSrvProfileEthPortConfigEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5
gponSrvProfilePortVlanObjects OBJECT IDENTIFIER ::= { gponSrvProfileObjects 5 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1
gponSrvProfilePortVlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfilePortVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1
gponSrvProfilePortVlanCfgEntry OBJECT-TYPE
SYNTAX GponSrvProfilePortVlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfilePortVlanProfileIndex, gponSrvProfilePortVlanPortTypeIndex, gponSrvProfilePortVlanPortIdIndex }
::= { gponSrvProfilePortVlanCfgTable 1 }
GponSrvProfilePortVlanCfgEntry ::=
SEQUENCE {
gponSrvProfilePortVlanProfileIndex
INTEGER,
gponSrvProfilePortVlanPortTypeIndex
INTEGER,
gponSrvProfilePortVlanPortIdIndex
INTEGER,
gponSrvProfilePortVlanPvid
INTEGER,
gponSrvProfilePortVlanPvidPri
INTEGER,
gponSrvProfilePortVlanMode
INTEGER
}
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1.1
gponSrvProfilePortVlanProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanCfgEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1.2
gponSrvProfilePortVlanPortTypeIndex OBJECT-TYPE
SYNTAX INTEGER
{
eth(0),
wlan(1),
catv(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanCfgEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1.3
gponSrvProfilePortVlanPortIdIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanCfgEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1.4
gponSrvProfilePortVlanPvid OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:unconcern"
::= { gponSrvProfilePortVlanCfgEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1.5
gponSrvProfilePortVlanPvidPri OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanCfgEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.1.1.6
gponSrvProfilePortVlanMode OBJECT-TYPE
SYNTAX INTEGER
{
transparent(0),
tag(1),
translate(2),
aggregation(3),
trunk(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanCfgEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2
gponSrvProfilePortVlanTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfilePortVlanTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanObjects 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1
gponSrvProfilePortVlanTranslationEntry OBJECT-TYPE
SYNTAX GponSrvProfilePortVlanTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfilePortVlanTransProfileIndex, gponSrvProfilePortVlanTransPortTypeIndex, gponSrvProfilePortVlanTransPortIdIndex, gponSrvProfilePortVlanTransVlanIndex }
::= { gponSrvProfilePortVlanTranslationTable 1 }
GponSrvProfilePortVlanTranslationEntry ::=
SEQUENCE {
gponSrvProfilePortVlanTransProfileIndex
INTEGER,
gponSrvProfilePortVlanTransPortTypeIndex
INTEGER,
gponSrvProfilePortVlanTransPortIdIndex
INTEGER,
gponSrvProfilePortVlanTransVlanIndex
INTEGER,
gponSrvProfilePortVlanTransNewVlan
INTEGER,
gponSrvProfilePortVlanTransRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1.1
gponSrvProfilePortVlanTransProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTranslationEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1.2
gponSrvProfilePortVlanTransPortTypeIndex OBJECT-TYPE
SYNTAX INTEGER
{
eth(0),
wlan(1),
catv(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTranslationEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1.3
gponSrvProfilePortVlanTransPortIdIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTranslationEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1.4
gponSrvProfilePortVlanTransVlanIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTranslationEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1.5
gponSrvProfilePortVlanTransNewVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTranslationEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.2.1.6
gponSrvProfilePortVlanTransRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTranslationEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3
gponSrvProfilePortVlanAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfilePortVlanAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanObjects 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1
gponSrvProfilePortVlanAggregationEntry OBJECT-TYPE
SYNTAX GponSrvProfilePortVlanAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfilePortVlanAggrProfileIndex, gponSrvProfilePortVlanAggrPortTypeIndex, gponSrvProfilePortVlanAggrPortIdIndex, gponSrvProfilePortVlanAggrVlanIndex }
::= { gponSrvProfilePortVlanAggregationTable 1 }
GponSrvProfilePortVlanAggregationEntry ::=
SEQUENCE {
gponSrvProfilePortVlanAggrProfileIndex
INTEGER,
gponSrvProfilePortVlanAggrPortTypeIndex
INTEGER,
gponSrvProfilePortVlanAggrPortIdIndex
INTEGER,
gponSrvProfilePortVlanAggrVlanIndex
INTEGER,
gponSrvProfilePortVlanAggrVlanList
OCTET STRING,
gponSrvProfilePortVlanAggrRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1.1
gponSrvProfilePortVlanAggrProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanAggregationEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1.2
gponSrvProfilePortVlanAggrPortTypeIndex OBJECT-TYPE
SYNTAX INTEGER
{
eth(0),
wlan(1),
catv(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanAggregationEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1.3
gponSrvProfilePortVlanAggrPortIdIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanAggregationEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1.4
gponSrvProfilePortVlanAggrVlanIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanAggregationEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1.5
gponSrvProfilePortVlanAggrVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"max num of vlan is 8, two bytes is one vlan."
::= { gponSrvProfilePortVlanAggregationEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.3.1.6
gponSrvProfilePortVlanAggrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanAggregationEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4
gponSrvProfilePortVlanTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponSrvProfilePortVlanTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanObjects 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4.1
gponSrvProfilePortVlanTrunkEntry OBJECT-TYPE
SYNTAX GponSrvProfilePortVlanTrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { gponSrvProfilePortVlanTrunkProfileIndex, gponSrvProfilePortVlanTrunkPortTypeIndex, gponSrvProfilePortVlanTrunkPortIdIndex }
::= { gponSrvProfilePortVlanTrunkTable 1 }
GponSrvProfilePortVlanTrunkEntry ::=
SEQUENCE {
gponSrvProfilePortVlanTrunkProfileIndex
INTEGER,
gponSrvProfilePortVlanTrunkPortTypeIndex
INTEGER,
gponSrvProfilePortVlanTrunkPortIdIndex
INTEGER,
gponSrvProfilePortVlanTrunkVlanList
OCTET STRING,
gponSrvProfilePortVlanTrunkRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4.1.1
gponSrvProfilePortVlanTrunkProfileIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTrunkEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4.1.2
gponSrvProfilePortVlanTrunkPortTypeIndex OBJECT-TYPE
SYNTAX INTEGER
{
eth(0),
wlan(1),
catv(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTrunkEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4.1.3
gponSrvProfilePortVlanTrunkPortIdIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTrunkEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4.1.4
gponSrvProfilePortVlanTrunkVlanList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"max num of vlan is 8, two bytes is one vlan."
::= { gponSrvProfilePortVlanTrunkEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.3.5.4.1.5
gponSrvProfilePortVlanTrunkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponSrvProfilePortVlanTrunkEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.4
gponTrafficProfileObjects OBJECT IDENTIFIER ::= { gponProfileObjects 4 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1
gponTrafficProfileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GponTrafficProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileObjects 1 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1
gponTrafficProfileInfoEntry OBJECT-TYPE
SYNTAX GponTrafficProfileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"cir/pir/cbs/pbs must config at the same time."
INDEX { gponTrafficProfileId }
::= { gponTrafficProfileInfoTable 1 }
GponTrafficProfileInfoEntry ::=
SEQUENCE {
gponTrafficProfileId
INTEGER,
gponTrafficProfileName
DisplayString,
gponTrafficProfileCfgCir
INTEGER,
gponTrafficProfileCfgPir
INTEGER,
gponTrafficProfileCfgCbs
INTEGER,
gponTrafficProfileCfgPbs
INTEGER,
gponTrafficProfileCfgPriority
INTEGER,
gponTrafficProfileBindNum
INTEGER,
gponTrafficProfileRowStatus
RowStatus
}
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.1
gponTrafficProfileId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 1 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.2
gponTrafficProfileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 2 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.3
gponTrafficProfileCfgCir OBJECT-TYPE
SYNTAX INTEGER
UNITS "kbit/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 3 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.4
gponTrafficProfileCfgPir OBJECT-TYPE
SYNTAX INTEGER
UNITS "kbit/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 4 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.5
gponTrafficProfileCfgCbs OBJECT-TYPE
SYNTAX INTEGER
UNITS "byte"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 5 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.6
gponTrafficProfileCfgPbs OBJECT-TYPE
SYNTAX INTEGER
UNITS "byte"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 6 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.7
gponTrafficProfileCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 7 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.8
gponTrafficProfileBindNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 8 }
-- 1.3.6.1.4.1.17409.2.8.11.4.1.1.9
gponTrafficProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { gponTrafficProfileInfoEntry 9 }
END
Reference in New Issue Copy Permalink