david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/ceraos/MWRM-NETWORK-MIB

15537 lines
480 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--MWRM-NETWORK-MIB VERSION 1.8.3.2
--MWRM (MicroWave-Radio-MIB)
MWRM-NETWORK-MIB DEFINITIONS ::= BEGIN
IMPORTS
-- Ipv6Address FROM IPV6-TC
-- Counter, enterprises, Gauge, IpAddress FROM RFC1155-SMI
Counter32, enterprises, Gauge32, IpAddress FROM SNMPv2-SMI
DisplayString, ifIndex FROM RFC1213-MIB
RowStatus FROM SNMPv2-TC
MacAddress FROM SNMPv2-TC
OBJECT-TYPE FROM SNMPv2-SMI
TRAP-TYPE FROM RFC-1215
EnableDisable FROM MWRM-UNIT-MIB
EnableDisableSMI2 FROM MWRM-UNIT-MIB
OffOn FROM MWRM-UNIT-MIB
MetricImperial FROM MWRM-UNIT-MIB
AllowedNotAllowed FROM MWRM-UNIT-MIB
ProgressStatus FROM MWRM-UNIT-MIB
Severity FROM MWRM-UNIT-MIB
NoYes FROM MWRM-UNIT-MIB
DownUp FROM MWRM-UNIT-MIB
TrailIfType FROM MWRM-UNIT-MIB
PmTableType FROM MWRM-UNIT-MIB
RateMbps FROM MWRM-UNIT-MIB
HalfFull FROM MWRM-UNIT-MIB
BerLevel FROM MWRM-UNIT-MIB
SignalLevel FROM MWRM-UNIT-MIB
LoopbackType FROM MWRM-UNIT-MIB
QueueName FROM MWRM-UNIT-MIB
RadioId FROM MWRM-UNIT-MIB
RfuId FROM MWRM-UNIT-MIB
SwCommand FROM MWRM-UNIT-MIB
TrailProtectedType FROM MWRM-UNIT-MIB
ClockSrc FROM MWRM-UNIT-MIB
SlotId FROM MWRM-UNIT-MIB
Integrity FROM MWRM-UNIT-MIB
GreenYellow FROM MWRM-UNIT-MIB
InputSeverity FROM MWRM-UNIT-MIB
SwCommandTimer FROM MWRM-UNIT-MIB;
microwave-radio OBJECT IDENTIFIER ::= { enterprises 2281 }
genEquip OBJECT IDENTIFIER ::= { microwave-radio 10}
genEquipUnit OBJECT IDENTIFIER ::= { genEquip 1}
-- Local enumeration types
MediaType ::= INTEGER {
auto-type(0),
rj45(1),
sfp(2),
radio(3),
pwe3(4)
}
AutoNegMode ::= INTEGER {
off(0),
on(1),
restart(2)
}
SpeedDefs ::= INTEGER {
speed-10(0),
speed-100(1),
speed-1000(2),
speed-2500(3),
speed-10000(4)
}
MasterSalveSetMode ::= INTEGER {
auto(0),
slave(1),
master(2)
}
FlowControl ::= INTEGER {
disable(0),
rx(1),
tx-rx(2)
}
PortType ::= INTEGER {
management(0),
line(1),
radio(2),
pwe(3),
cpu(4)
}
EdgePortType ::= INTEGER {
none(0),
edge(1)
}
TrustMode ::= INTEGER {
untrust(0),
trust(1)
}
ServiceType ::= INTEGER {
mng(0),
mp(1),
p2p(2)
}
ServiceSubType ::= INTEGER {
ethernet(0),
tdm(1),
pwe(2)
}
ServiceAdmin ::= INTEGER {
reserved(0),
operational(1)
}
ServiceCosMode ::= INTEGER {
default-cos(0),
preserve-sp-cos(1)
}
SPType ::= INTEGER {
sap(0),
snp(1),
mng(2),
pipe(3)
}
SPSubType ::= INTEGER {
dot1q(0),
s-tag(1),
bundle-c(2),
bundle-s(3),
all-to-one(4),
qinq(5)
}
DisableAllowed ::= INTEGER {
disable(0),
allow(1)
}
SPCosMode ::= INTEGER {
sp-def-cos(0),
interface-decision(1),
pc1(2),
tcam(3)
}
SplitHorizonGroup ::= INTEGER {
group-a(0),
group-b(1),
group-c(2),
group-d(3)
}
TrueFalse ::= INTEGER {
false(0),
true(1)
}
PolicerType ::= INTEGER {
mef-trtcm(0)
}
PolicerColorMode ::= INTEGER {
color-blind(0),
color-aware(1)
}
PWfpClockSignal ::= INTEGER {
sync(0),
unframed(1),
e1-mf(2),
e1-mf-crc(3),
ds1-d4(4),
ds1-esf(5)
}
PWCclockSysRef ::= INTEGER {
none(0),
front-panel(1),
clock-recovery(2)
}
PWCDiffClockSrc ::= INTEGER {
none(0),
front-panel(1),
sys-ref(2),
clock-1588(3)
}
PWRtpTimeStampMode ::= INTEGER {
absolute(0),
differential(1)
}
PWTunnelPsnType ::= INTEGER {
upd-ip(0),
eth(1),
mpls(2)
}
PWTunnelVlanType ::= INTEGER {
none(0),
c-type(1),
s-type(2)
}
PWPDHClockSource ::= INTEGER {
sys-ref(0),
rx-sdh(1),
internal(2)
}
TunnelGroupProtectionCmd ::= INTEGER {
no-request(0),
force-switch(1),
manual-switch(2),
lockout(3),
clear(4)
}
PWSOAMccmInterval ::= INTEGER {
n3-3-ms(0),
n10-ms(1),
n100-ms(2),
n1-s(3),
n10-s(4),
n1-m(5),
n10-m(6)
}
Dot1CfmInterfaceStatus ::= INTEGER {
no-interface(0),
up(1),
down(2),
testing(3),
unknown(4),
dormant(5),
not-present(6),
lower-layer-down(7)
}
BurstType ::= INTEGER {
short(0),
long(1)
}
IfMgrTrueFalse ::= INTEGER {
true(1),
false(2)
}
MibTrueFalse ::= INTEGER {
true(1),
false(2)
}
G8032LastState ::= INTEGER {
nr(0),
raps-nr(1),
raps-rb-nr(2),
running-wtb(3),
expired-wtb(4),
running-wtr(5),
expired-wtr(6),
ms(7),
raps-ms(8),
raps-sd(9),
clear-sd(10),
local-sd(11),
raps-sf(12),
clear-sf(13),
local-sf(14),
raps-fs(15),
fs(16),
clear(17)
}
TDMLoopbackType ::= INTEGER {
none(0),
towards-line(1),
towards-system(2)
}
RSTLoopbackType ::= INTEGER {
none(0),
towards-system(1),
towards-line(2)
}
LBState ::=INTEGER {
soamLbInactive(0),
soamLbActive(1),
soamLbStopped(2),
soamLbCompleted(3),
soamLbFailed(4)
}
-- Network
genEquipNetwork OBJECT IDENTIFIER ::= {genEquip 2}
genEquipNetworkRemoteIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This value indicates the Remote IP address."
::= { genEquipNetwork 1 }
genEquipNetworkMateIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the Mate IP address. (same as genEquipProtectionMateIPAddr)"
::= { genEquipNetwork 2 }
genEquipNetworkAgentIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This value indicates the Agent IP address. (same as genEquipNetworkManagmentLocalIp)"
::= { genEquipNetwork 3 }
--- Network Managment information
genEquipNetworkManagment OBJECT IDENTIFIER ::= { genEquipNetwork 4}
genEquipNetworkManagmentLocalIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local IP address. (same as genEquipNetworkAgentIp)"
::= { genEquipNetworkManagment 1 }
genEquipNetworkManagmentLocalSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local subnet mask. (for example 255.255.255.0)"
::= { genEquipNetworkManagment 2 }
genEquipNetworkManagmentLocalDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local default gateway."
::= { genEquipNetworkManagment 3 }
genEquipNetworkManagmentLocalHWAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the MAC Address used for management (related to the management IP address of the system)."
::= { genEquipNetworkManagment 4 }
genEquipNetworkManagmentRemoteSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This value indicates the Remote subnet mask.(for example 255.255.255.0)"
::= { genEquipNetworkManagment 5 }
genEquipNetworkManagmentNumOfPorts OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the number of management ports."
::= { genEquipNetworkManagment 6 }
genEquipNetworkManagmentInBandVLAN OBJECT-TYPE
SYNTAX INTEGER (1..4090)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the number of in-band VLANs."
::= { genEquipNetworkManagment 7 }
genEquipNetworkManagmentPortType OBJECT-TYPE
SYNTAX INTEGER { outOfBand(0), inBand(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a configurable option to use in-band or out-of-band management."
::= { genEquipNetworkManagment 8 }
genEquipNetworkManagmentPortCapacity OBJECT-TYPE
SYNTAX INTEGER {
n64(0),
n128(1),
n256(2),
n512(3),
n1024(4),
n2048(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates a limit rate for the management port capacity in kbps."
::= { genEquipNetworkManagment 9 }
genEquipNetworkManagmentPortAutoNegotiation OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the Auto Negotiation option, on all management ports."
::= { genEquipNetworkManagment 10 }
genEquipNetworkManagmentPortRate OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
n10(0),
n100(1),
n1000(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the port rate in Mbps (all management ports).
Possible values are:
- n10(0) 10Mbps
- n100(1) 100Mbps
- n1000(2) 1000Mbps"
::= { genEquipNetworkManagment 11 }
genEquipNetworkManagmentPortDuplex OBJECT-TYPE
SYNTAX INTEGER { half(0), full(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the port duplex value, for all management ports."
::= { genEquipNetworkManagment 12 }
genEquipNetworkManagmentBlockMngTowardsLine OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Blocking the in-band management frames to egress via the Ethernet line interface in pipe application."
::= { genEquipNetworkManagment 13 }
genEquipNetworkManagmentIpAddrCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipNetworkManagmentIpAddrCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery."
::= { genEquipNetworkManagment 20 }
genEquipNetworkManagmentIpAddrCfgEntry OBJECT-TYPE
SYNTAX GenEquipNetworkManagmentIpAddrCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery."
INDEX { genEquipNetworkManagmentIpAddrCfgMngId }
::= { genEquipNetworkManagmentIpAddrCfgTable 1 }
GenEquipNetworkManagmentIpAddrCfgEntry ::=
SEQUENCE {
genEquipNetworkManagmentIpAddrCfgMngId
INTEGER,
genEquipNetworkManagmentIpAddrCfgIpv4Address
IpAddress,
genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask
IpAddress,
genEquipNetworkManagmentIpAddrCfgDefaultGateway
IpAddress,
genEquipNetworkManagmentIpAddrCfgIpv6Address
OCTET STRING,
genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength
INTEGER,
genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6
OCTET STRING
}
genEquipNetworkManagmentIpAddrCfgMngId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Management Ifindex."
::= { genEquipNetworkManagmentIpAddrCfgEntry 1 }
genEquipNetworkManagmentIpAddrCfgIpv4Address OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local IP address"
::= { genEquipNetworkManagmentIpAddrCfgEntry 2 }
genEquipNetworkManagmentIpAddrCfgIpv4SubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local subnet mask. (for example 255.255.255.0)"
::= { genEquipNetworkManagmentIpAddrCfgEntry 3 }
genEquipNetworkManagmentIpAddrCfgDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local default gateway."
::= { genEquipNetworkManagmentIpAddrCfgEntry 4 }
genEquipNetworkManagmentIpAddrCfgIpv6Address OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the Local IPv6.
y is a 16-bit hexadecimal field of the form xxxx, where x takes values from 0 to F."
::= { genEquipNetworkManagmentIpAddrCfgEntry 5 }
genEquipNetworkManagmentIpAddrCfgIpv6PrefixLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPv6 Prefix-Length specifies the IPv6 subnet."
::= { genEquipNetworkManagmentIpAddrCfgEntry 6 }
genEquipNetworkManagmentIpAddrCfgDefaultGatewayIPv6 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the local IPv6 default gateway."
::= { genEquipNetworkManagmentIpAddrCfgEntry 7 }
--- IP Table information
genEquipNetworkIP OBJECT IDENTIFIER ::= { genEquipNetwork 5}
genEquipNetworkIPTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipNetworkIPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery."
::= { genEquipNetworkIP 1 }
genEquipNetworkIPEntry OBJECT-TYPE
SYNTAX GenEquipNetworkIPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table keeps the information about the neighbour attributes, such as IP address, MAC address, slot,
port number and description. It can be used by the NMS for topology discovery."
INDEX { ifIndex }
::= { genEquipNetworkIPTable 1 }
GenEquipNetworkIPEntry ::=
SEQUENCE {
genEquipNetworkIPEthernetPort
INTEGER,
genEquipNetworkIPPeerMacAddr
OCTET STRING,
genEquipNetworkIPPeerIPAddr
IpAddress,
genEquipNetworkIPPeerSlotID
INTEGER,
genEquipNetworkIPPeerPortNumber
INTEGER,
genEquipNetworkIPPeerDescr
DisplayString,
genEquipNetworkIPPeerNodeToNodeConnection
EnableDisable
}
genEquipNetworkIPEthernetPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet port (local port) is the index of the table, to be taken from ifIndex."
::= { genEquipNetworkIPEntry 1 }
genEquipNetworkIPPeerMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Peer (far-end) Mac address of the managed NE (CPU) connected on the local Ethernet port"
::= { genEquipNetworkIPEntry 2 }
genEquipNetworkIPPeerIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Peer (far-end) IP address of the managed NE (CPU) connected on the local Ethernet port"
::= { genEquipNetworkIPEntry 3 }
genEquipNetworkIPPeerSlotID OBJECT-TYPE
SYNTAX INTEGER (0..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Peer (far-end) slot-id of the managed NE connected on the local Ethernet port."
::= { genEquipNetworkIPEntry 4 }
genEquipNetworkIPPeerPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Peer (far-end) port number of the managed NE connected on the local Ethernet port. The port number is sequential
starting with 1"
::= { genEquipNetworkIPEntry 5 }
genEquipNetworkIPPeerDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User defined description for the peer port"
::= { genEquipNetworkIPEntry 6 }
genEquipNetworkIPPeerNodeToNodeConnection OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Node To Node Connection.
This column is relevant only for STM-1/OC-3 connections.
if this parameter is enabled, it means that the STM-1/OC-3 port is connected with another microwave-radio NE,
the STM-1/OC-3 port is not an access port, it is used by the NMS to find TDM trails."
::= { genEquipNetworkIPEntry 7 }
genEquipNetworkIPClearAllPeerInfo OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter is a command to clear the neighbor IP table info"
::= { genEquipNetworkIP 2 }
genEquipNetworkFloatingIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates the floating IP used when system is in protection mode.
This address must differ from system's own IP address (genEquipNetworkAgentIp)
as well as mate unit's (genEquipProtectionMateIPAddr)and must be in the same subnet.
A value of 0.0.0.0 will disable the feature."
::= { genEquipNetwork 6 }
genEquipNetworkAgentIpV6 OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION "This value indicates the agent IP V6. This parameter will be use for Trap only."
::= { genEquipNetwork 7 }
-- Services Configuration
genEquipServices OBJECT IDENTIFIER ::= {genEquip 8}
-- Ethernet Switch
genEquipEthernetSwitch OBJECT IDENTIFIER ::= {genEquipServices 1}
-- Ethernet Switch configuration
genEquipEthernetSwitchCfg OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 1}
genEquipEthernetSwitchCfgAppType OBJECT-TYPE
SYNTAX INTEGER {
single-pipe(1),
managed-switch(2),
metro-switch(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mode of the switch application. Note, managed-switch or metro-swtich require license.
Single-pipe: No switching is done, the NE acts as a Pipe.
Managed-switch: The switch application is configured as IEEE 802.1Q switch.
Metro-switch: The switch application is configured as IEEE 802.1ad switch."
::= { genEquipEthernetSwitchCfg 1 }
genEquipEthernetSwitchCfgVIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchCfgVIDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The switch VLAN table."
::= { genEquipEthernetSwitchCfg 2 }
genEquipEthernetSwitchCfgVIDEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchCfgVIDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The switch VLAN table."
INDEX { genEquipEthernetSwitchCfgVIDIndex }
::= { genEquipEthernetSwitchCfgVIDTable 1 }
GenEquipEthernetSwitchCfgVIDEntry ::=
SEQUENCE {
genEquipEthernetSwitchCfgVIDIndex
INTEGER,
genEquipEthernetSwitchCfgVIDName
DisplayString,
genEquipEthernetSwitchCfgVIDState
INTEGER,
genEquipEthernetSwitchCfgVIDMemberPorts
DisplayString,
genEquipEthernetSwitchCfgVIDEVCID
DisplayString,
genEquipEthernetSwitchCfgVIDEVCDescription
DisplayString,
genEquipEthernetSwitchCfgVIDRowStatus
RowStatus
}
genEquipEthernetSwitchCfgVIDIndex OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN number, the index of the table."
::= { genEquipEthernetSwitchCfgVIDEntry 1 }
genEquipEthernetSwitchCfgVIDName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN name."
::= { genEquipEthernetSwitchCfgVIDEntry 2 }
genEquipEthernetSwitchCfgVIDState OBJECT-TYPE
SYNTAX INTEGER {
suspend(1),
active(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN state."
::= { genEquipEthernetSwitchCfgVIDEntry 3 }
genEquipEthernetSwitchCfgVIDMemberPorts OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A string that indicates in which ports this VLAN is allowed. Port numbers are separated by spaces"
::= { genEquipEthernetSwitchCfgVIDEntry 4 }
genEquipEthernetSwitchCfgVIDEVCID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter defines a name for the Ethernet service running over this VLAN.
This information is used by the NMS as a service identifier"
::= { genEquipEthernetSwitchCfgVIDEntry 5 }
genEquipEthernetSwitchCfgVIDEVCDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows adding a description for the Ethernet service running over this VLAN.
This information is informational only for users purposes"
::= { genEquipEthernetSwitchCfgVIDEntry 6 }
genEquipEthernetSwitchCfgVIDRowStatus OBJECT-TYPE
SYNTAX RowStatus -- active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The raw status of the vlan table."
::= { genEquipEthernetSwitchCfgVIDEntry 30 }
genEquipEthernetSwitchCfgPbbteEthertype OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PBB-TE-Tag ethertype value"
::= { genEquipEthernetSwitchCfg 3 }
genEquipEthernetSwitchCfgProviderEthertype OBJECT-TYPE
SYNTAX INTEGER {
i0x8100(0),
i0x88A8(1),
i0x9100(2),
i0x9200(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethertype of the provider VLANS (S-tag). This parameter configures the Marvell switch
and it applys for all the ethernet ports. Possible choises are { 0x8100 , 0x9100 , 0x88A8 , 0x9200 }."
::= { genEquipEthernetSwitchCfg 4 }
genEquipEthernetSwitchCfgJumboModeAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This configuration defines the Ethernet Maximal Transmit Unit (MTU) size.
When jumbo mode is enabled, MTU=9612 bytes. When disabled, MTU=1632 bytes.
This configuration applies to all Ethernet traffic ports except management ports"
::= { genEquipEthernetSwitchCfg 5 }
-- Ethernet Switch xSTP
genEquipEthernetSwitchXSTP OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 2}
genEquipEthernetSwitchXSTPProtocol OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
stp(1),
rstp(2),
ring-rstp(3),
mstp(4),
ring-mstp(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Selection of the xSTP protocol. Note that not all protocols may be available in all software releases"
::= { genEquipEthernetSwitchXSTP 1 }
-- Ethernet Switch RSTP family (Ring RSTP or RSTP)
genEquipEthernetSwitchXSTPParams OBJECT IDENTIFIER ::= {genEquipEthernetSwitchXSTP 2}
genEquipEthernetSwitchXSTPBridgeID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RSTP bridge ID"
::= { genEquipEthernetSwitchXSTPParams 1 }
genEquipEthernetSwitchXSTPRootID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RSTP root id."
::= { genEquipEthernetSwitchXSTPParams 2 }
genEquipEthernetSwitchXSTPRootPath OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RSTP root path cost."
::= { genEquipEthernetSwitchXSTPParams 3 }
genEquipEthernetSwitchXSTPBridgeRole OBJECT-TYPE
SYNTAX INTEGER {
root-bridge(0),
designated-bridge(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge role."
::= { genEquipEthernetSwitchXSTPParams 4 }
genEquipEthernetSwitchXSTPCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..61440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RSTP Bridge priority."
::= { genEquipEthernetSwitchXSTPParams 5 }
genEquipEthernetSwitchXSTPParamsEthernetPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RSTP port status table."
::= { genEquipEthernetSwitchXSTPParams 6 }
genEquipEthernetSwitchXSTPParamsEthernetPortsEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"RSTP port status table."
INDEX { ifIndex }
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsTable 1 }
GenEquipEthernetSwitchXSTPParamsEthernetPortsEntry ::=
SEQUENCE {
genEquipEthernetSwitchXSTPParamsEthernetPortsState
INTEGER,
genEquipEthernetSwitchXSTPParamsEthernetPortsRole
INTEGER,
genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost
INTEGER,
genEquipEthernetSwitchXSTPParamsEthernetPortsPriority
INTEGER,
genEquipEthernetSwitchXSTPParamsEthernetDesPathCost
INTEGER,
genEquipEthernetSwitchXSTPParamsEthernetEdgePort
NoYes
}
genEquipEthernetSwitchXSTPParamsEthernetPortsState OBJECT-TYPE
SYNTAX INTEGER {
discarding(0),
listening(1),
learning(2),
forwarding(3),
blocking(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RSTP port state."
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 1 }
genEquipEthernetSwitchXSTPParamsEthernetPortsRole OBJECT-TYPE
SYNTAX INTEGER {
masterport(0),
alternate(1),
rootport(2),
designated(3),
disabled(4),
backup(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RSTP port role."
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 2 }
genEquipEthernetSwitchXSTPParamsEthernetPortsPathCost OBJECT-TYPE
SYNTAX INTEGER (1..200000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RSTP configured path cost."
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 3 }
genEquipEthernetSwitchXSTPParamsEthernetPortsPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RSTP configured port priority."
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 4 }
genEquipEthernetSwitchXSTPParamsEthernetDesPathCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RSTP designated path cost. This is the path cost to the root port from this local port."
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 5 }
genEquipEthernetSwitchXSTPParamsEthernetEdgePort OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates if the port is an Edge port or not."
::= { genEquipEthernetSwitchXSTPParamsEthernetPortsEntry 6 }
-- Ethernet Switch QoS & Rate Limiting
genEquipEthernetSwitchQoS OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 3}
genEquipEthernetSwitchQoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The switch application, QoS Table."
::= { genEquipEthernetSwitchQoS 1 }
genEquipEthernetSwitchQoSEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The switch application, QoS Table, per Ethernet port based on ifIndex."
INDEX { ifIndex }
::= { genEquipEthernetSwitchQoSTable 1 }
GenEquipEthernetSwitchQoSEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSFirstCrit
INTEGER,
genEquipEthernetSwitchQoSSecondCrit
INTEGER,
genEquipEthernetSwitchQoSThirdCrit
INTEGER,
genEquipEthernetSwitchQoSDefClassification
INTEGER,
genEquipEthernetSwitchQoSEgressSched
INTEGER,
genEquipEthernetSwitchQoSEgressShaper
OffOn,
genEquipEthernetSwitchQoSEgressShaperRate
INTEGER,
genEquipEthernetSwitchQoSIngressPolicer
DisplayString
}
genEquipEthernetSwitchQoSFirstCrit OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
queueDecision(1),
pbitOverride(2),
queueAndPbitOverride(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"First classification criteria. This is the first criteria which will be evaluated for incoming frames.
queueDecision causes classification by defined static MAC address.
pbitOverride causes classification by pbits.
queueAndPbitOverridecauses classification by defined static MAC address, and changes the pbits accordingly."
::= { genEquipEthernetSwitchQoSEntry 1 }
genEquipEthernetSwitchQoSSecondCrit OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
queueDecision(1),
pbitOverride(2),
queueAndPbitOverride(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Second classification criteria. Applicable if match with first criteria is not found.
queueDecision causes classification by defined VLAN to queue mapping.
pbitOverride causes classification by pbits.
queueAndPbitOverrideclassification by defined VLAN to queue mapping, and changes the pbits accordingly."
::= { genEquipEthernetSwitchQoSEntry 2 }
genEquipEthernetSwitchQoSThirdCrit OBJECT-TYPE
SYNTAX INTEGER {
ipTosPriority(0),
vlanPbitspriority(1),
ipTosOverVlanPbitsPriority(2),
vlanPbitsOverIpTosPriority(3),
portPriority(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Third classification criteria. Applicable if match with first or second criteria is not found.
ipTosPriority causes classification by defined IP TOS to queue mapping only.
vlanPbitspriority causes classification by pbits only.
ipTosOverVlanPbitsPriority causes classification by IP TOS and then by pbits .
ipTosOverVlanPbitsPriority causes classification by pbits and then by IP TOS.
portPriority causes port-based classification according to port priority."
::= { genEquipEthernetSwitchQoSEntry 3 }
genEquipEthernetSwitchQoSDefClassification OBJECT-TYPE
SYNTAX INTEGER {
first(0),
second(1),
third(2),
fourth(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Default classification for frame that does suit to the previous classifications.
Choosing first will classify this frame as the first criteria for example."
::= { genEquipEthernetSwitchQoSEntry 4 }
genEquipEthernetSwitchQoSEgressSched OBJECT-TYPE
SYNTAX INTEGER {
allQueuesStrict(0),
fourthQueueStrict(1),
fourthThirdQueuesStrict(2),
allQueuesHrr(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress scheduler options."
::= { genEquipEthernetSwitchQoSEntry 5 }
genEquipEthernetSwitchQoSEgressShaper OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable egress shaping."
::= { genEquipEthernetSwitchQoSEntry 6 }
genEquipEthernetSwitchQoSEgressShaperRate OBJECT-TYPE
SYNTAX INTEGER (64..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress shaper rate."
::= { genEquipEthernetSwitchQoSEntry 7 }
genEquipEthernetSwitchQoSIngressPolicer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress policer (rate limiting) name assiciated with this port.
The policer Name is defined in genEquipEthernetSwitchQoSPolicerNameName (in a table)"
::= { genEquipEthernetSwitchQoSEntry 8 }
-- VLAN Pbit Remap table
genEquipEthernetSwitchVlanPbitRemapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchVlanPbitRemapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN priority bits remapping table."
::= { genEquipEthernetSwitchQoS 2 }
genEquipEthernetSwitchVlanPbitRemapEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchVlanPbitRemapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN priority bits remap table."
INDEX { ifIndex, genEquipEthernetSwitchVlanPbitRemapPbit }
::= { genEquipEthernetSwitchVlanPbitRemapTable 1 }
GenEquipEthernetSwitchVlanPbitRemapEntry ::=
SEQUENCE {
genEquipEthernetSwitchVlanPbitRemapPbit
INTEGER,
genEquipEthernetSwitchVlanPbitRemapRemappedPbit
INTEGER
}
genEquipEthernetSwitchVlanPbitRemapPbit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ingress Pbit."
::= { genEquipEthernetSwitchVlanPbitRemapEntry 1 }
genEquipEthernetSwitchVlanPbitRemapRemappedPbit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The remapped Pbit."
::= { genEquipEthernetSwitchVlanPbitRemapEntry 2 }
-- VLAN Id Queue
genEquipEthernetSwitchQoSVLANIdToQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSVLANIdToQueueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN Id to Queue mapping table."
::= { genEquipEthernetSwitchQoS 3 }
genEquipEthernetSwitchQoSVLANIdToQueueEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSVLANIdToQueueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN Id to Queue mapping table."
INDEX { genEquipEthernetSwitchCfgVIDIndex } -- list of all defined vlans (vlan index)
::= { genEquipEthernetSwitchQoSVLANIdToQueueTable 1 }
GenEquipEthernetSwitchQoSVLANIdToQueueEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSVLANIdToQueueQueue
QueueName
}
genEquipEthernetSwitchQoSVLANIdToQueueQueue OBJECT-TYPE
SYNTAX QueueName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Queue for the vlan."
::= { genEquipEthernetSwitchQoSVLANIdToQueueEntry 1 }
-- LAG Defenitions
genEquipEthernetSwitchLag OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 4}
genEquipEthernetSwitchLagDistFunction OBJECT-TYPE
SYNTAX INTEGER {
simple-xor(0),
hash(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"LAG distribution function. "
::= { genEquipEthernetSwitchLag 1 }
genEquipEthernetSwitchLagMaxNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Max number of LAG port groups."
::= { genEquipEthernetSwitchLag 2 }
-- Traffic Managment Defenitions
genEquipEthernetSwitchETM OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 5}
genEquipEthernetSwitchEtmAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling the entire enhanced TM functionality."
::= { genEquipEthernetSwitchETM 1 }
genEquipEthernetSwitchEtmPTPOptimizedTransportModeAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Precision Time Protocol low PDV channel admin Upon enabling all the packets classified to the 8th
queue will bypass the scheduler and will be sent directly to the Radio Frame.
Enabling this parameter will fail if Wayside is enabled."
::= { genEquipEthernetSwitchETM 2 }
genEquipEthernetSwitchEtmCountersClear OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset selected module's counters."
::= { genEquipEthernetSwitchETM 3 }
genEquipEthernetSwitchEtmPTPOptimizedTransportMode OBJECT-TYPE
SYNTAX INTEGER {
high-Cos-Queue-8(0),
ieee-1588(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PTP optimized transport channel operation mode. In High-CoS-Queue-8 mode all the frames that will be classified
to the 8th queue in the traffic manager will be send to the PTP optimized transport channel.
In IEEE-1588 mode IEEE 1588 frames will be identified automatically based on UDP ports and/or ethertypes."
::= { genEquipEthernetSwitchETM 4 }
-- TM Packet classification tables and control parameters.
genEquipEthernetSwitchEtmClassifier OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 6}
-- TM CoS classification by destination MAC address.
genEquipEthernetSwitchEtmClassifierByMac OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 1}
genEquipEthernetSwitchEtmClassifierByMacAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and color classification by destination MAC addresses."
::= { genEquipEthernetSwitchEtmClassifierByMac 1 }
genEquipEthernetSwitchEtmClassifierByMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by destination MAC address."
::= { genEquipEthernetSwitchEtmClassifierByMac 2 }
genEquipEthernetSwitchEtmClassifierByMacEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByMacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by destination MAC address."
INDEX { genEquipEthernetSwitchEtmClassifierByMacIndex }
::= { genEquipEthernetSwitchEtmClassifierByMacTable 1 }
GenEquipEthernetSwitchEtmClassifierByMacEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByMacIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByMacValue
OCTET STRING,
genEquipEthernetSwitchEtmClassifierByMacCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByMacColor
GreenYellow,
genEquipEthernetSwitchEtmClassifierByMacRowStatus
RowStatus
}
genEquipEthernetSwitchEtmClassifierByMacIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains different MAC address."
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 1 }
genEquipEthernetSwitchEtmClassifierByMacValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC Address value for CoS Classification by MAC Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 2 }
genEquipEthernetSwitchEtmClassifierByMacCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for CoS Classification by MAC Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 3 }
genEquipEthernetSwitchEtmClassifierByMacColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for CoS Classification by MAC Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 4 }
genEquipEthernetSwitchEtmClassifierByMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row Status for this table."
::= { genEquipEthernetSwitchEtmClassifierByMacEntry 30 }
-- TM CoS classification by UDP port.
genEquipEthernetSwitchEtmClassifierByUdpPort OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 2}
genEquipEthernetSwitchEtmClassifierByUdpPortAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and color classification by UDP source and/or destination ports."
::= { genEquipEthernetSwitchEtmClassifierByUdpPort 1 }
genEquipEthernetSwitchEtmClassifierByUdpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByUdpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by UDP ports. Classification may be based on source port,
dest port ,or both - use validity parameter."
::= { genEquipEthernetSwitchEtmClassifierByUdpPort 2 }
genEquipEthernetSwitchEtmClassifierByUdpPortEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByUdpPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for CoS and color classification by UDP ports. Classification may be based on source port,
dest port ,or both - use validity parameter."
INDEX { genEquipEthernetSwitchEtmClassifierByUdpPortIndex }
::= { genEquipEthernetSwitchEtmClassifierByUdpPortTable 1 }
GenEquipEthernetSwitchEtmClassifierByUdpPortEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByUdpPortIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort
INTEGER,
genEquipEthernetSwitchEtmClassifierByUdpPortDestPort
INTEGER,
genEquipEthernetSwitchEtmClassifierByUdpPortCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByUdpPortColor
GreenYellow,
genEquipEthernetSwitchEtmClassifierByUdpPortValidity
INTEGER,
genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus
RowStatus
}
genEquipEthernetSwitchEtmClassifierByUdpPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains different UDP source and destination ports."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 1 }
genEquipEthernetSwitchEtmClassifierByUdpPortSrcPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP source port value for CoS Classification by UDP ports Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 2 }
genEquipEthernetSwitchEtmClassifierByUdpPortDestPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP dest. port value for CoS Classification by UDP ports Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 3 }
genEquipEthernetSwitchEtmClassifierByUdpPortCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for CoS Classification by UDP Ports Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 4 }
genEquipEthernetSwitchEtmClassifierByUdpPortColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for CoS Classification by UDP ports Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 5 }
genEquipEthernetSwitchEtmClassifierByUdpPortValidity OBJECT-TYPE
SYNTAX INTEGER {
unused(0),
src(1),
dest(2),
both(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Validity value for CoS Classification by UDP ports Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 6 }
genEquipEthernetSwitchEtmClassifierByUdpPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row Status for this table."
::= { genEquipEthernetSwitchEtmClassifierByUdpPortEntry 30 }
-- TM CoS classification by Ethertypes.
-- genEquipEthernetSwitchEtmClassifierByEthertypes OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 3}
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesAdmin OBJECT-TYPE
-- SYNTAX EnableDisable
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Enabling/Disabling CoS and color classification by Ethertypes."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypes 1 }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByEthertypesEntry
-- ACCESS not-accessible
-- STATUS mandatory
-- DESCRIPTION
-- "Table for CoS and color classification by Ethertype."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypes 2 }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesEntry OBJECT-TYPE
-- SYNTAX GenEquipEthernetSwitchEtmClassifierByEthertypesEntry
-- ACCESS not-accessible
-- STATUS mandatory
-- DESCRIPTION
-- "Table entry for CoS and color classification by Ethertype."
-- INDEX { genEquipEthernetSwitchEtmClassifierByEthertypesIndex }
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesTable 1 }
--
-- GenEquipEthernetSwitchEtmClassifierByEthertypesEntry ::=
-- SEQUENCE {
-- genEquipEthernetSwitchEtmClassifierByEthertypesIndex
-- INTEGER,
-- genEquipEthernetSwitchEtmClassifierByEthertypesValue
-- INTEGER,
-- genEquipEthernetSwitchEtmClassifierByEthertypesCos
-- INTEGER,
-- genEquipEthernetSwitchEtmClassifierByEthertypesColor
-- GreenYellow,
-- genEquipEthernetSwitchEtmClassifierByEthertypesRowStatus
-- RowStatus
-- }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesIndex OBJECT-TYPE
-- SYNTAX INTEGER (1..16)
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "The index is pointing to a table entry. Each entry contains different Ethertype value."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 1 }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesValue OBJECT-TYPE
-- SYNTAX INTEGER
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Ethertype tag value for CoS Classification by Ethertype Table Entry."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 2 }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesCos OBJECT-TYPE
-- SYNTAX INTEGER (0..7)
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "CoS value for CoS Classification by Ethertype Table Entry."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 3 }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesColor OBJECT-TYPE
-- SYNTAX GreenYellow
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Color value for CoS Classification by Ethertype Table Entry."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 4 }
--
-- genEquipEthernetSwitchEtmClassifierByEthertypesRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Row Status for this table."
-- ::= { genEquipEthernetSwitchEtmClassifierByEthertypesEntry 30 }
--
-- TM CoS classification by Known PDU MAC addresses.
genEquipEthernetSwitchEtmClassifierByKnownPduMac OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 4}
genEquipEthernetSwitchEtmClassifierByKnownPduMacAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and color classification by known PDU MAC addresses."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMac 1 }
genEquipEthernetSwitchEtmClassifierByKnownPduMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by known PDU MAC addresses."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMac 2 }
genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for CoS and color classification by known PDU MAC addresses."
INDEX { genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex }
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacTable 1 }
GenEquipEthernetSwitchEtmClassifierByKnownPduMacEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress
OCTET STRING,
genEquipEthernetSwitchEtmClassifierByKnownPduMacCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByKnownPduMacColor
GreenYellow,
genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity
EnableDisable
}
genEquipEthernetSwitchEtmClassifierByKnownPduMacIndex OBJECT-TYPE
SYNTAX INTEGER (1..66)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains different PDU MAC address value."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 1 }
genEquipEthernetSwitchEtmClassifierByKnownPduMacAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CoS value for MAC address Classification by known PDU Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 2 }
genEquipEthernetSwitchEtmClassifierByKnownPduMacCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for CoS Classification by known PDU Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 3 }
genEquipEthernetSwitchEtmClassifierByKnownPduMacColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for CoS Classification by known PDU Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 4 }
genEquipEthernetSwitchEtmClassifierByKnownPduMacValidity OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Validity value for Cos Classification by known PDU Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByKnownPduMacEntry 5 }
-- TM CoS classification by Service.
genEquipEthernetSwitchEtmClassifierByService OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 5}
genEquipEthernetSwitchEtmClassifierByServiceAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and color classification by service IDs."
::= { genEquipEthernetSwitchEtmClassifierByService 1 }
genEquipEthernetSwitchEtmClassifierByServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by service-ids."
::= { genEquipEthernetSwitchEtmClassifierByService 2 }
genEquipEthernetSwitchEtmClassifierByServiceEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for CoS and color classification by service-ids."
INDEX { genEquipEthernetSwitchEtmClassifierByServiceIndex }
::= { genEquipEthernetSwitchEtmClassifierByServiceTable 1 }
GenEquipEthernetSwitchEtmClassifierByServiceEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByServiceIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByServiceCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByServiceColor
GreenYellow,
genEquipEthernetSwitchEtmClassifierByServiceUsage
EnableDisable
}
genEquipEthernetSwitchEtmClassifierByServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains a mapping of service-id to CoS."
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 1 }
genEquipEthernetSwitchEtmClassifierByServiceCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for CoS serviceID Mapping Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 2 }
genEquipEthernetSwitchEtmClassifierByServiceColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for CoS serviceId Mapping Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 3 }
genEquipEthernetSwitchEtmClassifierByServiceUsage OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Validity value for CoS serviceID Mapping Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByServiceEntry 4 }
-- TM CoS classification by VLAN P-bits.
genEquipEthernetSwitchEtmClassifierByVlanPbits OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 6}
genEquipEthernetSwitchEtmClassifierByVlanPbitsAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and color classification by VLAN P-bits and CFI/DEI bit."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbits 1 }
-- Vlan table
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by VLAN S-tag P-bits and DEI bit."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbits 2 }
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for CoS and color classification by VLAN S-tag P-bits and DEI bit."
INDEX { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex }
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanTable 1 }
GenEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority
INTEGER,
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei
INTEGER,
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor
GreenYellow
}
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pbit vlan index to table."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 1 }
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pbit value for regular classification prioritization."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 2 }
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanDei OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DEI value for regular classification prioritization by S-tag vlan."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 3 }
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for regular classification prioritization by S-tag VLAN."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 4 }
genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for regular classification prioritization by S-tag VLAN."
::= { genEquipEthernetSwitchEtmClassifierByVlanPbitsVlanEntry 5 }
-- TM CoS classification by IP DSCP bits.
genEquipEthernetSwitchEtmClassifierByDscp OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 7}
genEquipEthernetSwitchEtmClassifierByDscpAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling Cos and color classification by DSCP/TOS bits."
::= { genEquipEthernetSwitchEtmClassifierByDscp 1 }
genEquipEthernetSwitchEtmClassifierByDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByDscpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by DSCP/TOS bits."
::= { genEquipEthernetSwitchEtmClassifierByDscp 2 }
genEquipEthernetSwitchEtmClassifierByDscpEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByDscpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for CoS and color classification by DSCP/TOS bits."
INDEX { genEquipEthernetSwitchEtmClassifierByDscpValue }
::= { genEquipEthernetSwitchEtmClassifierByDscpTable 1 }
GenEquipEthernetSwitchEtmClassifierByDscpEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByDscpValue
INTEGER,
genEquipEthernetSwitchEtmClassifierByDscpCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByDscpColor
GreenYellow
}
genEquipEthernetSwitchEtmClassifierByDscpValue OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains different DSCP/TOS bits mapping."
::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 1 }
genEquipEthernetSwitchEtmClassifierByDscpCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for regular classification prioritization by DSCP-tag."
::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 2 }
genEquipEthernetSwitchEtmClassifierByDscpColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for regular classification prioritization by MPLS."
::= { genEquipEthernetSwitchEtmClassifierByDscpEntry 3 }
-- TM CoS classification by MPLS experimental bits.
genEquipEthernetSwitchEtmClassifierByMplsExp OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 8}
genEquipEthernetSwitchEtmClassifierByMplsExpAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and color classification by MPLS experimantal bits."
::= { genEquipEthernetSwitchEtmClassifierByMplsExp 1 }
genEquipEthernetSwitchEtmClassifierByMplsExpTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByMplsExpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for CoS and color classification by MPLS experimental bits."
::= { genEquipEthernetSwitchEtmClassifierByMplsExp 2 }
genEquipEthernetSwitchEtmClassifierByMplsExpEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByMplsExpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for CoS and color classification by MPLS experimental bits."
INDEX { genEquipEthernetSwitchEtmClassifierByMplsExpValue }
::= { genEquipEthernetSwitchEtmClassifierByMplsExpTable 1 }
GenEquipEthernetSwitchEtmClassifierByMplsExpEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByMplsExpValue
INTEGER,
genEquipEthernetSwitchEtmClassifierByMplsExpCos
INTEGER,
genEquipEthernetSwitchEtmClassifierByMplsExpColor
GreenYellow
}
genEquipEthernetSwitchEtmClassifierByMplsExpValue OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains different MPLS experimantal bits mapping."
::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 1 }
genEquipEthernetSwitchEtmClassifierByMplsExpCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for regular classification prioritization by MPLS."
::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 2 }
genEquipEthernetSwitchEtmClassifierByMplsExpColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color value for regular classification prioritization by MPLS."
::= { genEquipEthernetSwitchEtmClassifierByMplsExpEntry 3 }
-- TM CoS default color defs.
genEquipEthernetSwitchEtmClassifierByDefaultCosColor OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 9}
genEquipEthernetSwitchEtmClassifierByDefaultCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS value for regular classification prioritization by default port."
::= { genEquipEthernetSwitchEtmClassifierByDefaultCosColor 1 }
genEquipEthernetSwitchEtmClassifierByDefaultColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table for regular priority by default port mapping table."
::= { genEquipEthernetSwitchEtmClassifierByDefaultCosColor 2 }
-- TM CoS classification by Cos To Queue
genEquipEthernetSwitchEtmClassifierByCosToQueue OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 10}
genEquipEthernetSwitchEtmClassifierByCosToQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for VLAN to FlowId mapping ."
::= { genEquipEthernetSwitchEtmClassifierByCosToQueue 1 }
genEquipEthernetSwitchEtmClassifierByCosToQueueEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for VLAN to FlowId mapping ."
INDEX { genEquipEthernetSwitchEtmClassifierByCosToQueueIndex }
::= { genEquipEthernetSwitchEtmClassifierByCosToQueueTable 1 }
GenEquipEthernetSwitchEtmClassifierByCosToQueueEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByCosToQueueIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByCosToQueueValue
INTEGER
}
genEquipEthernetSwitchEtmClassifierByCosToQueueIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue."
::= { genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 1 }
genEquipEthernetSwitchEtmClassifierByCosToQueueValue OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Queue index for CoS to Queue Mapping Table Entry."
::= { genEquipEthernetSwitchEtmClassifierByCosToQueueEntry 2 }
-- TM CoS classification by Vlan to Service
genEquipEthernetSwitchEtmClassifierVlanidToService OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 11}
genEquipEthernetSwitchEtmClassifierVlanidToServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for VLAN to Vlan To Servies mapping ."
::= { genEquipEthernetSwitchEtmClassifierVlanidToService 1 }
genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for VLAN to Vlan To Servies mapping ."
INDEX { genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex }
::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceTable 1 }
GenEquipEthernetSwitchEtmClassifierVlanidToServiceEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex
INTEGER,
genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue
INTEGER
}
genEquipEthernetSwitchEtmClassifierByServiceVlanidToServiceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index is pointing to a table entry. Each entry contains a mapping of a different CoS to a queue."
::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 1 }
genEquipEthernetSwitchEtmClassifierByFlowsVlanidToServiceValue OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipEthernetSwitchEtmClassifierVlanidToServiceEntry 2 }
-- TM Classifier Inband Managment Qos
-- Cos and Color classification by VLAN-ID. Only a single VLAN-ID value can be specified.
-- This is configuration should be used for inband management VLAN-ID classification to the high priority queue.
genEquipEthernetSwitchEtmClassifierInbandMgmtQoS OBJECT IDENTIFIER ::= {genEquipEthernetSwitchEtmClassifier 12}
genEquipEthernetSwitchEtmClassifierInbandMgmtAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling CoS and Color classification by VLAN ID."
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 1 }
genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4090)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Inband Management vlan id. This parameter should be the same as genEquipEthernetSwitchEtmClassifierInbandMgmtVlanId."
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 2 }
genEquipEthernetSwitchEtmClassifierInbandMgmtCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Class of Service. Allowed values: [0-7]."
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 3 }
genEquipEthernetSwitchEtmClassifierInbandMgmtColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color 1=green ; 0=yellow."
::= { genEquipEthernetSwitchEtmClassifierInbandMgmtQoS 4 }
-- TM ACM drop per queue paramters.
--genEquipEthernetSwitchEtmAcmDropPerQueue OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 7}
-- TM Policers configuration and mapping tables and parameters
genEquipEthernetSwitchEtmPolicers OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 8}
genEquipEthernetSwitchEtmPolicerModuleAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling Policing."
::= { genEquipEthernetSwitchEtmPolicers 1 }
-- Table of Service to Policeer mapping
genEquipEthernetSwitchEtmServiceToPolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmServiceToPolicerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Service to Policeer mapping."
::= { genEquipEthernetSwitchEtmPolicers 2 }
genEquipEthernetSwitchEtmServiceToPolicerEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmServiceToPolicerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Service to Policeer mapping."
INDEX { genEquipEthernetSwitchEtmServiceToPolicerIndex }
::= { genEquipEthernetSwitchEtmServiceToPolicerTable 1 }
GenEquipEthernetSwitchEtmServiceToPolicerEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmServiceToPolicerIndex
INTEGER,
genEquipEthernetSwitchEtmServiceToPolicerValue
INTEGER,
genEquipEthernetSwitchEtmServiceToPolicerPerCosOption
EnableDisable
}
genEquipEthernetSwitchEtmServiceToPolicerIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Index."
::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 1 }
genEquipEthernetSwitchEtmServiceToPolicerValue OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policer to be used for the specific Service."
::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 2 }
genEquipEthernetSwitchEtmServiceToPolicerPerCosOption OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policer per CoS option. If enabled, each Service will be mapped to 8 policers while each policer will be used
for a different CoS value. This option can be used only for the pilicers with indeces of multiple of 8. i.e 8,16,24,32,240,248."
::= { genEquipEthernetSwitchEtmServiceToPolicerEntry 3 }
-- Table of Policers configuration
genEquipEthernetSwitchEtmPolicerConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmPolicerConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Policers configuration."
::= { genEquipEthernetSwitchEtmPolicers 3 }
genEquipEthernetSwitchEtmPolicerConfigEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmPolicerConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Policers configuration."
INDEX { genEquipEthernetSwitchEtmPolicerConfigIndex }
::= { genEquipEthernetSwitchEtmPolicerConfigTable 1 }
GenEquipEthernetSwitchEtmPolicerConfigEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmPolicerConfigIndex
INTEGER,
genEquipEthernetSwitchEtmPolicerConfigAdmin
EnableDisable,
genEquipEthernetSwitchEtmPolicerConfigColorAware
EnableDisable,
genEquipEthernetSwitchEtmPolicerConfigCir
INTEGER,
genEquipEthernetSwitchEtmPolicerConfigCbs
INTEGER,
genEquipEthernetSwitchEtmPolicerConfigEir
INTEGER,
genEquipEthernetSwitchEtmPolicerConfigEbs
INTEGER,
genEquipEthernetSwitchEtmPolicerConfigCoupling
EnableDisable,
genEquipEthernetSwitchEtmPolicerConfigLineComp
INTEGER
}
genEquipEthernetSwitchEtmPolicerConfigIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Index."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 1 }
genEquipEthernetSwitchEtmPolicerConfigAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer admin disables/enables the policing feature per policer.
If not enabled, the policer is in bypass mode (no rate limiting)."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 2 }
genEquipEthernetSwitchEtmPolicerConfigColorAware OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Whether policer is color aware."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 3 }
genEquipEthernetSwitchEtmPolicerConfigCir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer CIR value - the committed rate user requests."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 4 }
genEquipEthernetSwitchEtmPolicerConfigCbs OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer committed burst size value."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 5 }
genEquipEthernetSwitchEtmPolicerConfigEir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer EIR value - the excess rate user requests."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 6 }
genEquipEthernetSwitchEtmPolicerConfigEbs OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer excess burst size value (bytes)."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 7 }
genEquipEthernetSwitchEtmPolicerConfigCoupling OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer coupling mode."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 8 }
genEquipEthernetSwitchEtmPolicerConfigLineComp OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress policer line compensation value (bytes)."
::= { genEquipEthernetSwitchEtmPolicerConfigEntry 9 }
-- TM Queues configuration
genEquipEthernetSwitchEtmQueues OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 9}
genEquipEthernetSwitchEtmQueuesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmQueuesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of queue sizes."
::= { genEquipEthernetSwitchEtmQueues 1 }
genEquipEthernetSwitchEtmQueuesEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmQueuesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry of queue sizes."
INDEX { genEquipEthernetSwitchEtmQueuesIndex }
::= { genEquipEthernetSwitchEtmQueuesTable 1 }
GenEquipEthernetSwitchEtmQueuesEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmQueuesIndex
INTEGER,
genEquipEthernetSwitchEtmQueuesSize
INTEGER
}
genEquipEthernetSwitchEtmQueuesIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Index to a queue."
::= { genEquipEthernetSwitchEtmQueuesEntry 1 }
genEquipEthernetSwitchEtmQueuesSize OBJECT-TYPE
SYNTAX INTEGER {
kbit-0(0),
kbit-500(1),
kbit-1000(2),
kbit-2000(3),
kbit-4000(4),
kbit-250(5),
kbit-3000(6),
kbit-3500(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Size of queue[i]"
::= { genEquipEthernetSwitchEtmQueuesEntry 2 }
-- TM WRED configuration
genEquipEthernetSwitchEtmWred OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 10}
genEquipEthernetSwitchEtmWredAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling WRED."
::= { genEquipEthernetSwitchEtmWred 1 }
genEquipEthernetSwitchEtmWredThresholdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmWredThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"WRED thresholds per queue."
::= { genEquipEthernetSwitchEtmWred 2 }
genEquipEthernetSwitchEtmWredThresholdsEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmWredThresholdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"WRED entry thresholds per queue."
INDEX { genEquipEthernetSwitchEtmWredQueuesIndex }
::= { genEquipEthernetSwitchEtmWredThresholdsTable 1 }
GenEquipEthernetSwitchEtmWredThresholdsEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmWredQueuesIndex
INTEGER,
genEquipEthernetSwitchEtmWredThresholdsGreenThLow
INTEGER,
genEquipEthernetSwitchEtmWredThresholdsGreenThHigh
INTEGER,
genEquipEthernetSwitchEtmWredThresholdsYellowThLow
INTEGER,
genEquipEthernetSwitchEtmWredThresholdsYellowThHigh
INTEGER,
genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop
INTEGER,
genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop
INTEGER
}
genEquipEthernetSwitchEtmWredQueuesIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"WRED thresholds per queue."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 1 }
genEquipEthernetSwitchEtmWredThresholdsGreenThLow OBJECT-TYPE
SYNTAX INTEGER (0..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED green low threshold defines the queue level (in Kbits) point
that the mechanism should start checking if to drop the green frames."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 2 }
genEquipEthernetSwitchEtmWredThresholdsGreenThHigh OBJECT-TYPE
SYNTAX INTEGER (0..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED green high threshold defines the queue level of occupancy (in Kbits) point that the WRED
must drop all arriving green colored frames."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 3 }
genEquipEthernetSwitchEtmWredThresholdsYellowThLow OBJECT-TYPE
SYNTAX INTEGER (0..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED yellow low threshold defines the queue level (in Kbits) point that the mechanism should
start checking if to drop the yellow frames."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 4 }
genEquipEthernetSwitchEtmWredThresholdsYellowThHigh OBJECT-TYPE
SYNTAX INTEGER (0..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED yellow high threshold defines the queue level of occupancy (in Kbits) point that the WRED
must drop all arriving yellow colored frames."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 5 }
genEquipEthernetSwitchEtmWredThresholdsGreenMaxDrop OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED green max drop threshold the probability to drop frame at the green high threshold (in percent based units)."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 6 }
genEquipEthernetSwitchEtmWredThresholdsYellowMaxDrop OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED yellow max drop threshold the probability to drop frame at the yellow high threshold (in percent based units)."
::= { genEquipEthernetSwitchEtmWredThresholdsEntry 7 }
-- TM Marker configurations
genEquipEthernetSwitchEtmMarker OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 11}
genEquipEthernetSwitchEtmMarkerAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabling/Disabling marking of VLAN P-bits and DEI/CFI bit at the egress."
::= { genEquipEthernetSwitchEtmMarker 1 }
genEquipEthernetSwitchEtmMarkerTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmMarkerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of CoS and color to Pbits and DEI marking for S-VALNS."
::= { genEquipEthernetSwitchEtmMarker 2 }
genEquipEthernetSwitchEtmMarkerEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmMarkerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of CoS and color to Pbits and DEI marking for S-VALNS."
INDEX { genEquipEthernetSwitchEtmMarkerCoS,
genEquipEthernetSwitchEtmMarkerColor
}
::= { genEquipEthernetSwitchEtmMarkerTable 1 }
GenEquipEthernetSwitchEtmMarkerEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmMarkerCoS
INTEGER,
genEquipEthernetSwitchEtmMarkerColor
INTEGER,
genEquipEthernetSwitchEtmMarkerPbit
INTEGER,
genEquipEthernetSwitchEtmMarkerCfi
INTEGER
}
genEquipEthernetSwitchEtmMarkerCoS OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CoS value as was mapped by the TM calssifier."
::= { genEquipEthernetSwitchEtmMarkerEntry 1 }
genEquipEthernetSwitchEtmMarkerColor OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Color value as was mapped by the TM calssifier."
::= { genEquipEthernetSwitchEtmMarkerEntry 2 }
genEquipEthernetSwitchEtmMarkerPbit OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN 802.1p P-bit value to be modified."
::= { genEquipEthernetSwitchEtmMarkerEntry 3 }
genEquipEthernetSwitchEtmMarkerCfi OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN CFI/DEI value to be modified."
::= { genEquipEthernetSwitchEtmMarkerEntry 4 }
-- TM Scheduler configuration
genEquipEthernetSwitchEtmScheduler OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 12}
genEquipEthernetSwitchEtmSchedulerQuantum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WFQ Quantum for credit calculation in bytes (64, 128, 256, 512)."
::= { genEquipEthernetSwitchEtmScheduler 1 }
genEquipEthernetSwitchEtmSchedulerConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmSchedulerConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table for scheduler configuration: priority and weight for each queue."
::= { genEquipEthernetSwitchEtmScheduler 2 }
genEquipEthernetSwitchEtmSchedulerConfigEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmSchedulerConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for scheduler configuration: priority and weight for each queue."
INDEX { genEquipEthernetSwitchEtmSchedulerConfigQueueIndex }
::= { genEquipEthernetSwitchEtmSchedulerConfigTable 1 }
GenEquipEthernetSwitchEtmSchedulerConfigEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmSchedulerConfigQueueIndex
INTEGER,
genEquipEthernetSwitchEtmSchedulerConfigPriority
INTEGER,
genEquipEthernetSwitchEtmSchedulerConfigWeight
INTEGER
}
genEquipEthernetSwitchEtmSchedulerConfigQueueIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"queue index."
::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 1 }
genEquipEthernetSwitchEtmSchedulerConfigPriority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Strict priority of each queue. 4=highest , 1=lowest."
::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 2 }
genEquipEthernetSwitchEtmSchedulerConfigWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WFQ Weights for each queue"
::= { genEquipEthernetSwitchEtmSchedulerConfigEntry 3 }
-- TM Egress shaper configuration
genEquipEthernetSwitchEtmShaper OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 13}
genEquipEthernetSwitchEtmShaperGlobalAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Global Shaper admin disables/enables the global shaping feature."
::= { genEquipEthernetSwitchEtmShaper 1 }
genEquipEthernetSwitchEtmShaperConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchEtmShaperConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of shapers' configurations. Each shaper is on the egress of a queue.."
::= { genEquipEthernetSwitchEtmShaper 2 }
genEquipEthernetSwitchEtmShaperConfigEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchEtmShaperConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry of shapers' configurations. Each shaper is on the egress of a queue.."
INDEX { genEquipEthernetSwitchEtmShaperConfigIndex }
::= { genEquipEthernetSwitchEtmShaperConfigTable 1 }
GenEquipEthernetSwitchEtmShaperConfigEntry ::=
SEQUENCE {
genEquipEthernetSwitchEtmShaperConfigIndex
INTEGER,
genEquipEthernetSwitchEtmShaperConfigAdmin
INTEGER,
genEquipEthernetSwitchEtmShaperConfigCir
INTEGER,
genEquipEthernetSwitchEtmShaperConfigCbs
INTEGER,
genEquipEthernetSwitchEtmShaperConfigLineComp
INTEGER
}
genEquipEthernetSwitchEtmShaperConfigIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"queue index."
::= { genEquipEthernetSwitchEtmShaperConfigEntry 1 }
genEquipEthernetSwitchEtmShaperConfigAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress Shaper admin disables/enables the shaping feature per queue."
::= { genEquipEthernetSwitchEtmShaperConfigEntry 2 }
genEquipEthernetSwitchEtmShaperConfigCir OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress shaper CIR value - the committed rate as given by the user."
::= { genEquipEthernetSwitchEtmShaperConfigEntry 3 }
genEquipEthernetSwitchEtmShaperConfigCbs OBJECT-TYPE
SYNTAX INTEGER (0..128000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress shaper committed burst size value."
::= { genEquipEthernetSwitchEtmShaperConfigEntry 4 }
genEquipEthernetSwitchEtmShaperConfigLineComp OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Egress shaper line compensation value transmitted IFG + Preamble.
The shaper adds this value to each arriving frame size."
::= { genEquipEthernetSwitchEtmShaperConfigEntry 5 }
-- TM Statistics counters
genEquipEthernetSwitchEtmStatistics OBJECT IDENTIFIER ::= {genEquipEthernetSwitchETM 14}
genEquipEthernetSwitchEtmStatisticsPortTotalBytesTransmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes transmitted via the port (goes into PM)."
::= { genEquipEthernetSwitchEtmStatistics 1 }
genEquipEthernetSwitchEtmStatisticsPortTotalUnicastFramesTransmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"TThe number of Unicast frames transmitted to the radio port.."
::= { genEquipEthernetSwitchEtmStatistics 2 }
genEquipEthernetSwitchEtmStatisticsPortTotalMulticastFramesTransmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Multicast frames transmitted to the radio port.."
::= { genEquipEthernetSwitchEtmStatistics 3 }
genEquipEthernetSwitchEtmStatisticsPortTotalBroadcastFramesTransmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Broadcast frames transmitted to the radio port.."
::= { genEquipEthernetSwitchEtmStatistics 4 }
genEquipEthernetSwitchEtmStatisticsPortFrames64octTransmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames transmitted with a length of exactly 64 Octets."
::= { genEquipEthernetSwitchEtmStatistics 5 }
genEquipEthernetSwitchEtmStatisticsPortFrames65to127Transmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames transmitted with a length of 65-127 Octets."
::= { genEquipEthernetSwitchEtmStatistics 6 }
genEquipEthernetSwitchEtmStatisticsPortFrames128to255Transmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames transmitted with a length of 128-255 Octets."
::= { genEquipEthernetSwitchEtmStatistics 7 }
genEquipEthernetSwitchEtmStatisticsPortFrames256to511Transmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames transmitted with a length of 256-511 Octets)."
::= { genEquipEthernetSwitchEtmStatistics 8 }
genEquipEthernetSwitchEtmStatisticsPortFrames512to1023Transmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"TThe total number of frames transmitted with a length of 512-1023 Octets."
::= { genEquipEthernetSwitchEtmStatistics 9 }
genEquipEthernetSwitchEtmStatisticsPortFrames1024toMtuTransmitted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of frames transmitted with a length between 1024 and MaxTransmitSize Octets."
::= { genEquipEthernetSwitchEtmStatistics 10 }
-- IP Pbits to Queue
genEquipEthernetSwitchQoSIPPbits OBJECT IDENTIFIER ::= {genEquipEthernetSwitchQoS 4}
genEquipEthernetSwitchQoSIPPbitsIPPrio OBJECT-TYPE
SYNTAX INTEGER {
ipPrecedence(0),
ipv4TOSIPv6(1) -- diffserv.
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP priority options."
::= { genEquipEthernetSwitchQoSIPPbits 1 }
genEquipEthernetSwitchQoSIPPbitsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSIPPbitsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Mapping of IP pbits to Queue."
::= { genEquipEthernetSwitchQoSIPPbits 2 }
genEquipEthernetSwitchQoSIPPbitsEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSIPPbitsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Mapping of IP pbits to Queue."
INDEX { genEquipEthernetSwitchQoSIPPbitsId }
::= { genEquipEthernetSwitchQoSIPPbitsTable 1 }
GenEquipEthernetSwitchQoSIPPbitsEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSIPPbitsId
INTEGER,
genEquipEthernetSwitchQoSIPPbitsQueue
QueueName
}
genEquipEthernetSwitchQoSIPPbitsId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The pbit number."
::= { genEquipEthernetSwitchQoSIPPbitsEntry 1 }
genEquipEthernetSwitchQoSIPPbitsQueue OBJECT-TYPE
SYNTAX QueueName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the queue for that pbit."
::= { genEquipEthernetSwitchQoSIPPbitsEntry 2 }
-- VLAN Pbits to queue
genEquipEthernetSwitchQoSVLANPbitsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSVLANPbitsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN pbit to queue mapping table."
::= { genEquipEthernetSwitchQoS 5 }
genEquipEthernetSwitchQoSVLANPbitsEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSVLANPbitsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"VLAN pbit to queue mapping table."
INDEX { genEquipEthernetSwitchQoSVLANPbitsId }
::= { genEquipEthernetSwitchQoSVLANPbitsTable 1 }
GenEquipEthernetSwitchQoSVLANPbitsEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSVLANPbitsId
INTEGER,
genEquipEthernetSwitchQoSVLANPbitsQueue
QueueName
}
genEquipEthernetSwitchQoSVLANPbitsId OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN'S pbit (index of the table)"
::= { genEquipEthernetSwitchQoSVLANPbitsEntry 1 }
genEquipEthernetSwitchQoSVLANPbitsQueue OBJECT-TYPE
SYNTAX QueueName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The mapped queue for the corresponding VLAN ."
::= { genEquipEthernetSwitchQoSVLANPbitsEntry 2 }
-- Queue Weights
genEquipEthernetSwitchQoSQueueWeightsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSQueueWeightsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Queue weights mapping table."
::= { genEquipEthernetSwitchQoS 6 }
genEquipEthernetSwitchQoSQueueWeightsEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSQueueWeightsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Queue weights mapping table."
INDEX { genEquipEthernetSwitchQoSQueueWeightsId }
::= { genEquipEthernetSwitchQoSQueueWeightsTable 1 }
GenEquipEthernetSwitchQoSQueueWeightsEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSQueueWeightsId
INTEGER,
genEquipEthernetSwitchQoSQueueWeightsQueue
QueueName,
genEquipEthernetSwitchQoSQueueWeightsWeight
INTEGER
}
genEquipEthernetSwitchQoSQueueWeightsId OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for this table."
::= { genEquipEthernetSwitchQoSQueueWeightsEntry 1 }
genEquipEthernetSwitchQoSQueueWeightsQueue OBJECT-TYPE
SYNTAX QueueName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The queue number."
::= { genEquipEthernetSwitchQoSQueueWeightsEntry 2 }
genEquipEthernetSwitchQoSQueueWeightsWeight OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The weight for the queue"
::= { genEquipEthernetSwitchQoSQueueWeightsEntry 3 }
-- Policer list
-- Policer Name table
genEquipEthernetSwitchQoSPolicerNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSPolicerNameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of configured policers."
::= { genEquipEthernetSwitchQoS 7 }
genEquipEthernetSwitchQoSPolicerNameEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSPolicerNameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Table of configured policers."
INDEX { genEquipEthernetSwitchQoSPolicerNameId }
::= { genEquipEthernetSwitchQoSPolicerNameTable 1 }
GenEquipEthernetSwitchQoSPolicerNameEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSPolicerNameId
INTEGER,
genEquipEthernetSwitchQoSPolicerNameName
DisplayString,
genEquipEthernetSwitchQoSPolicerNameRowStatus
RowStatus
}
genEquipEthernetSwitchQoSPolicerNameId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Policer ID"
::= { genEquipEthernetSwitchQoSPolicerNameEntry 1 }
genEquipEthernetSwitchQoSPolicerNameName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policer name."
::= { genEquipEthernetSwitchQoSPolicerNameEntry 2 }
genEquipEthernetSwitchQoSPolicerNameRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policer row status."
::= { genEquipEthernetSwitchQoSPolicerNameEntry 30 }
-- Policer list table
genEquipEthernetSwitchQoSPolicerListTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSPolicerListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The policer class table list."
::= { genEquipEthernetSwitchQoS 8 }
genEquipEthernetSwitchQoSPolicerListEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSPolicerListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The policer class table list."
INDEX { genEquipEthernetSwitchQoSPolicerNameId, genEquipEthernetSwitchQoSPolicerListId }
::= { genEquipEthernetSwitchQoSPolicerListTable 1 }
GenEquipEthernetSwitchQoSPolicerListEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSPolicerListId
INTEGER,
genEquipEthernetSwitchQoSPolicerListName
DisplayString,
genEquipEthernetSwitchQoSPolicerListClassName
DisplayString,
genEquipEthernetSwitchQoSPolicerListTrafficType
INTEGER,
genEquipEthernetSwitchQoSPolicerListCIR
INTEGER,
genEquipEthernetSwitchQoSPolicerListCBS
INTEGER,
genEquipEthernetSwitchQoSPolicerListRowStatus
RowStatus
}
genEquipEthernetSwitchQoSPolicerListId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The policer ID."
::= { genEquipEthernetSwitchQoSPolicerListEntry 1 }
genEquipEthernetSwitchQoSPolicerListName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The policer class name"
::= { genEquipEthernetSwitchQoSPolicerListEntry 2 }
genEquipEthernetSwitchQoSPolicerListClassName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The policer class name"
::= { genEquipEthernetSwitchQoSPolicerListEntry 3 }
genEquipEthernetSwitchQoSPolicerListTrafficType OBJECT-TYPE
SYNTAX INTEGER {
unknownUcast(1),
unknowMulticast(2),
broadcast(3),
multicast(5),
unicast(6),
arp(8),
tcpData(9),
tcpControl(10),
udp(11),
noTcpUdp(12),
firstPriority(13),
secondPriority(14),
thirdPriority(15),
forthPriority(16),
allTraffic(17)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The traffic type that the policer applies to."
::= { genEquipEthernetSwitchQoSPolicerListEntry 4 }
genEquipEthernetSwitchQoSPolicerListCIR OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CIR (Critical Information Rate) value (in Kbps)"
::= { genEquipEthernetSwitchQoSPolicerListEntry 5 }
genEquipEthernetSwitchQoSPolicerListCBS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CBS (Critical Burst Size) value (in Bytes)"
::= { genEquipEthernetSwitchQoSPolicerListEntry 6 }
genEquipEthernetSwitchQoSPolicerListRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status of the table."
::= { genEquipEthernetSwitchQoSPolicerListEntry 30 }
-- Static MAC
genEquipEthernetSwitchQoSStaticMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipEthernetSwitchQoSStaticMacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Static MAC forwarding table."
::= { genEquipEthernetSwitchQoS 9 }
genEquipEthernetSwitchQoSStaticMacEntry OBJECT-TYPE
SYNTAX GenEquipEthernetSwitchQoSStaticMacEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Static MAC forwarding table."
INDEX { genEquipEthernetSwitchQoSStaticMacId }
::= { genEquipEthernetSwitchQoSStaticMacTable 1 }
GenEquipEthernetSwitchQoSStaticMacEntry ::=
SEQUENCE {
genEquipEthernetSwitchQoSStaticMacId
INTEGER,
genEquipEthernetSwitchQoSStaticMacAddr
OCTET STRING,
genEquipEthernetSwitchQoSStaticMacVlanId
INTEGER,
genEquipEthernetSwitchQoSStaticMacForwardTo
INTEGER,
genEquipEthernetSwitchQoSStaticMacPriority
INTEGER,
genEquipEthernetSwitchQoSStaticMacRowStatus
RowStatus
}
genEquipEthernetSwitchQoSStaticMacId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the table"
::= { genEquipEthernetSwitchQoSStaticMacEntry 1 }
genEquipEthernetSwitchQoSStaticMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Static MAC Address."
::= { genEquipEthernetSwitchQoSStaticMacEntry 2 }
genEquipEthernetSwitchQoSStaticMacVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN ID for this MAC."
::= { genEquipEthernetSwitchQoSStaticMacEntry 3 }
genEquipEthernetSwitchQoSStaticMacForwardTo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port number to be forwarded to, starting from 1."
::= { genEquipEthernetSwitchQoSStaticMacEntry 4 }
genEquipEthernetSwitchQoSStaticMacPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority to be given to this MAC address."
::= { genEquipEthernetSwitchQoSStaticMacEntry 5 }
genEquipEthernetSwitchQoSStaticMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The row status of the operation."
::= { genEquipEthernetSwitchQoSStaticMacEntry 30 }
-- MSTP
--
genEquipProtocols OBJECT IDENTIFIER ::= {genEquipEthernetSwitch 6}
genEquipProtocolsMstp OBJECT IDENTIFIER ::= {genEquipProtocols 1}
--
-- MSTP General attributes - mstp-general-attributes-table
--
genEquipProtocolsMstpGeneralAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsMstpGeneralAttributesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing NE configuration and maintenance attributes which are not part of the standard MIB."
::= { genEquipProtocolsMstp 1 }
genEquipProtocolsMstpGeneralAttributesEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsMstpGeneralAttributesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing NE configuration and maintenance attributes which are not part of the standard MIB."
INDEX { genEquipProtocolsMstpGeneralAttributesComponentId }
::= { genEquipProtocolsMstpGeneralAttributesTable 1 }
GenEquipProtocolsMstpGeneralAttributesEntry ::=
SEQUENCE {
genEquipProtocolsMstpGeneralAttributesComponentId
INTEGER,
genEquipProtocolsMstpGeneralAttributesMstpEnabled
TrueFalse,
genEquipProtocolsMstpGeneralAttributesNumberOfinstances
INTEGER,
genEquipProtocolsMstpGeneralAttributesMigrateTime
INTEGER,
genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC
INTEGER,
genEquipProtocolsMstpGeneralAttributesFrozen
TrueFalse,
genEquipProtocolsMstpGeneralAttributesSdHandling
INTEGER,
genEquipProtocolsMstpGeneralAttributesReset
TrueFalse,
genEquipProtocolsMstpGeneralAttributesResetCounters
TrueFalse
}
genEquipProtocolsMstpGeneralAttributesComponentId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Distinguished between multiple virtual bridge instances within a PB or PBB. In simple situations, i.e. single component the default is 1"
::= { genEquipProtocolsMstpGeneralAttributesEntry 1 }
genEquipProtocolsMstpGeneralAttributesMstpEnabled OBJECT-TYPE
SYNTAX TrueFalse
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set, MSTP protocol is enabled on NE"
::= { genEquipProtocolsMstpGeneralAttributesEntry 2 }
genEquipProtocolsMstpGeneralAttributesNumberOfinstances OBJECT-TYPE
SYNTAX INTEGER (2..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies number of instances supported. Value ranges from 2 to 16."
::= { genEquipProtocolsMstpGeneralAttributesEntry 3 }
genEquipProtocolsMstpGeneralAttributesMigrateTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When MSTP bridge detects the presence of STP data on one of its ports,
it migrates after 'MigrateTime' has elapsed, if migrate is enabled."
::= { genEquipProtocolsMstpGeneralAttributesEntry 4 }
genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC OBJECT-TYPE
SYNTAX INTEGER {
customer(0),
provider(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to 'customer', BPDU Dest MAC address should be set to 0x0180-C200-0000.
Otherwise, BPDU Dest MAC address should be set to 0x0180-C200-0008"
::= { genEquipProtocolsMstpGeneralAttributesEntry 5 }
genEquipProtocolsMstpGeneralAttributesFrozen OBJECT-TYPE
SYNTAX TrueFalse
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set, MSTP protocol stops running in NE., i.e. BPDU are neither processed nor transmitted.
All ports states are maintained."
::= { genEquipProtocolsMstpGeneralAttributesEntry 6 }
genEquipProtocolsMstpGeneralAttributesSdHandling OBJECT-TYPE
SYNTAX INTEGER {
ignored(0),
sameAsSF(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to 'ignored', SD (Signal Degrade) failures are ignored in MSTP. Otherwise, SD failures are treated same as SF."
::= { genEquipProtocolsMstpGeneralAttributesEntry 7 }
genEquipProtocolsMstpGeneralAttributesReset OBJECT-TYPE
SYNTAX INTEGER {
noAction(0),
reset(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to reset, MSTP Protocol suit is reset"
::= { genEquipProtocolsMstpGeneralAttributesEntry 8 }
genEquipProtocolsMstpGeneralAttributesResetCounters OBJECT-TYPE
SYNTAX INTEGER {
noAction(0),
reset(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to reset, MSTP counters are reset"
::= { genEquipProtocolsMstpGeneralAttributesEntry 9 }
--
-- MSTP counters per instance per port - mstp-mstp-port-counters-table
--
genEquipProtocolsMstpCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsMstpCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing MSTP counters per instance per port."
::= { genEquipProtocolsMstp 2 }
genEquipProtocolsMstpCountersEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsMstpCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing MSTP counters per instance per port."
INDEX { genEquipProtocolsMstpCountersPortId }
::= { genEquipProtocolsMstpCountersTable 1 }
GenEquipProtocolsMstpCountersEntry ::=
SEQUENCE {
genEquipProtocolsMstpCountersPortId
INTEGER,
genEquipProtocolsMstpCountersNumberOfReceivedTCN
INTEGER,
genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu
INTEGER,
genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu
INTEGER,
genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu
INTEGER,
genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu
INTEGER,
genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu
INTEGER,
genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu
INTEGER,
genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu
INTEGER
}
genEquipProtocolsMstpCountersPortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port ID (ifIndex)"
::= { genEquipProtocolsMstpCountersEntry 1 }
genEquipProtocolsMstpCountersNumberOfReceivedTCN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of received TCN"
::= { genEquipProtocolsMstpCountersEntry 2 }
genEquipProtocolsMstpCountersNumberOfReceivedConfigurationBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of received Configuration BPDU."
::= { genEquipProtocolsMstpCountersEntry 3 }
genEquipProtocolsMstpCountersNumberOfReceivedRstBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of received RST BPDU."
::= { genEquipProtocolsMstpCountersEntry 4 }
genEquipProtocolsMstpCountersNumberOfReceivedMstBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of received MST BPDU"
::= { genEquipProtocolsMstpCountersEntry 5 }
genEquipProtocolsMstpCountersNumberOfTransmittedTcnBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number Of Transmitted TCN BPDU."
::= { genEquipProtocolsMstpCountersEntry 6 }
genEquipProtocolsMstpCountersNumberOfTransmittedConfigurationBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmitted Configuration BPDU."
::= { genEquipProtocolsMstpCountersEntry 7 }
genEquipProtocolsMstpCountersNumberOfTransmittedRstBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmitted RST BPDU"
::= { genEquipProtocolsMstpCountersEntry 8 }
genEquipProtocolsMstpCountersNumberOfTransmittedMstBpdu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmitted MST BPDU"
::= { genEquipProtocolsMstpCountersEntry 9 }
genEquipProtocolsEoam OBJECT IDENTIFIER ::= {genEquipProtocols 2}
--
-- EOAM Configuration and Status - eoam-bw-vsm-table
--
genEquipProtocolsEoamBwVsmTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsEoamBwVsmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A Table containing Ethernet OAM Configuration and Status."
::= { genEquipProtocolsEoam 1 }
genEquipProtocolsEoamBwVsmEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsEoamBwVsmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A Table entry containing Ethernet OAM Configuration and Status."
INDEX { genEquipProtocolsEoamBwVsmName }
::= { genEquipProtocolsEoamBwVsmTable 1 }
GenEquipProtocolsEoamBwVsmEntry ::=
SEQUENCE {
genEquipProtocolsEoamBwVsmName
DisplayString,
genEquipProtocolsEoamBwVsmAdmin
Dot1CfmInterfaceStatus,
genEquipProtocolsEoamBwVsmPeriod
INTEGER,
genEquipProtocolsEoamBwVsmCurrentBw
INTEGER,
genEquipProtocolsEoamBwVsmControlIfindex
INTEGER,
genEquipProtocolsEoamBwVsmId
INTEGER,
genEquipProtocolsEoamBwVsmMonitoredIfindex
INTEGER,
genEquipProtocolsEoamBwVsmHoldoff
INTEGER,
genEquipProtocolsEoamBwVsmHoldoffStartTime
INTEGER,
genEquipProtocolsEoamBwVsmHoldoffState
INTEGER,
genEquipProtocolsEoamBwVsmLastSentMsg
OCTET STRING,
genEquipProtocolsEoamBwVsmMel
INTEGER,
genEquipProtocolsEoamBwVsmMonitoringInterval
INTEGER,
genEquipProtocolsEoamBwVsmNominalBw
INTEGER,
genEquipProtocolsEoamBwVsmTxMsgCounter
INTEGER,
genEquipProtocolsEoamBwVsmVersion
INTEGER,
genEquipProtocolsEoamBwVsmVlan
INTEGER,
genEquipProtocolsEoamBwVsmResetMsgCounter
OffOn,
genEquipProtocolsEoamBwVsmRowStatus
RowStatus
}
genEquipProtocolsEoamBwVsmName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of EOAM entity"
::= { genEquipProtocolsEoamBwVsmEntry 1 }
genEquipProtocolsEoamBwVsmAdmin OBJECT-TYPE
SYNTAX Dot1CfmInterfaceStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Eoam Admin. Possible valuew: Up, Down"
::= { genEquipProtocolsEoamBwVsmEntry 2 }
genEquipProtocolsEoamBwVsmPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval of transmitting messages, when current nominal."
::= { genEquipProtocolsEoamBwVsmEntry 3 }
genEquipProtocolsEoamBwVsmCurrentBw OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Current BW measure by 4 samples (with 250msec interval)"
::= { genEquipProtocolsEoamBwVsmEntry 4 }
genEquipProtocolsEoamBwVsmControlIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control Interface of the eoam entity"
::= { genEquipProtocolsEoamBwVsmEntry 5 }
genEquipProtocolsEoamBwVsmId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"EOAM index."
::= { genEquipProtocolsEoamBwVsmEntry 6 }
genEquipProtocolsEoamBwVsmMonitoredIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Monitored Interface of the eoam entity"
::= { genEquipProtocolsEoamBwVsmEntry 7 }
genEquipProtocolsEoamBwVsmHoldoff OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The holdoff time in which, if BW below nominal, a message is sent"
::= { genEquipProtocolsEoamBwVsmEntry 8 }
genEquipProtocolsEoamBwVsmHoldoffStartTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The holdoff start counting time"
::= { genEquipProtocolsEoamBwVsmEntry 9 }
genEquipProtocolsEoamBwVsmHoldoffState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The holdoff state of the EOAM entity"
::= { genEquipProtocolsEoamBwVsmEntry 10 }
genEquipProtocolsEoamBwVsmLastSentMsg OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last EOAM message transmitted"
::= { genEquipProtocolsEoamBwVsmEntry 11 }
genEquipProtocolsEoamBwVsmMel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The MEL to be set in the bw-vsm messages"
::= { genEquipProtocolsEoamBwVsmEntry 12 }
genEquipProtocolsEoamBwVsmMonitoringInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The monitoring interval of the average BE calculation"
::= { genEquipProtocolsEoamBwVsmEntry 13 }
genEquipProtocolsEoamBwVsmNominalBw OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nominal BW of the monitored interface, to be set in the bw-vsm messages"
::= { genEquipProtocolsEoamBwVsmEntry 14 }
genEquipProtocolsEoamBwVsmTxMsgCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of transmitted messages"
::= { genEquipProtocolsEoamBwVsmEntry 15 }
genEquipProtocolsEoamBwVsmVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EOAM version used"
::= { genEquipProtocolsEoamBwVsmEntry 16 }
genEquipProtocolsEoamBwVsmVlan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The VLAN to be set in the bw-vsm messages"
::= { genEquipProtocolsEoamBwVsmEntry 17 }
genEquipProtocolsEoamBwVsmResetMsgCounter OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reset Messages Counter"
::= { genEquipProtocolsEoamBwVsmEntry 18 }
genEquipProtocolsEoamBwVsmRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProtocolsEoamBwVsmEntry 30 }
genEquipProtocolsG8032Erpi OBJECT IDENTIFIER ::= {genEquipProtocols 3}
--
-- G8032 ERPI attributes - g8032-erpi-attributes-table
--
genEquipProtocols8032DestMacAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"G8032 (Resiliency protocol) destination MAC address"
::= { genEquipProtocolsG8032Erpi 1 }
genEquipProtocolsG8032NodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"G.8032 Node ID"
::= { genEquipProtocolsG8032Erpi 2 }
--
--
genEquipProtocolsG8032ErpiAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsG8032ErpiAttributesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing ERPI attributes."
::= { genEquipProtocolsG8032Erpi 10 }
genEquipProtocolsG8032ErpiAttributesEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsG8032ErpiAttributesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table entry containing ERPI attributes."
INDEX { genEquipProtocolsG8032ErpiAttributesErpiId }
::= { genEquipProtocolsG8032ErpiAttributesTable 1 }
GenEquipProtocolsG8032ErpiAttributesEntry ::=
SEQUENCE {
genEquipProtocolsG8032ErpiAttributesErpiId
INTEGER,
genEquipProtocolsG8032ErpiAttributesErpiName
DisplayString,
genEquipProtocolsG8032ErpiAttributesGuardTime
INTEGER,
genEquipProtocolsG8032ErpiAttributesHoldoffTime
INTEGER,
genEquipProtocolsG8032ErpiAttributesLastChangeTs
INTEGER,
genEquipProtocolsG8032ErpiAttributesLastHpRequest
G8032LastState,
genEquipProtocolsG8032ErpiAttributesLastLocalState
G8032LastState,
genEquipProtocolsG8032ErpiAttributesLastRemoteState
G8032LastState,
genEquipProtocolsG8032ErpiAttributesMegLevel
INTEGER,
genEquipProtocolsG8032ErpiAttributesDownMep
INTEGER,
genEquipProtocolsG8032ErpiAttributesRevertive
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiAttributesRingState
INTEGER,
genEquipProtocolsG8032ErpiAttributesRplOwner
INTEGER,
genEquipProtocolsG8032ErpiAttributesSdHandling
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiAttributesServiceId
INTEGER,
genEquipProtocolsG8032ErpiAttributesErpiType
INTEGER,
genEquipProtocolsG8032ErpiAttributesVersion
INTEGER,
genEquipProtocolsG8032ErpiAttributesVirtualChannel
INTEGER,
genEquipProtocolsG8032ErpiAttributesWtr
INTEGER,
genEquipProtocolsG8032ErpiAttributesRowStatus
RowStatus
}
genEquipProtocolsG8032ErpiAttributesErpiId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ERPI ID"
::= { genEquipProtocolsG8032ErpiAttributesEntry 1 }
genEquipProtocolsG8032ErpiAttributesErpiName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ERPI Name"
::= { genEquipProtocolsG8032ErpiAttributesEntry 2 }
genEquipProtocolsG8032ErpiAttributesGuardTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the ERPI Guard Time; units are msec, steps are 10msec."
::= { genEquipProtocolsG8032ErpiAttributesEntry 3 }
genEquipProtocolsG8032ErpiAttributesHoldoffTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ERPI holdoff Time; units are msec, steps are 100msec.
Controls the time from failure detection to responding to failure"
::= { genEquipProtocolsG8032ErpiAttributesEntry 4 }
genEquipProtocolsG8032ErpiAttributesLastChangeTs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the Timestamp of the last ring state machine transition"
::= { genEquipProtocolsG8032ErpiAttributesEntry 5 }
genEquipProtocolsG8032ErpiAttributesLastHpRequest OBJECT-TYPE
SYNTAX G8032LastState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the last high-priority request."
::= { genEquipProtocolsG8032ErpiAttributesEntry 6 }
genEquipProtocolsG8032ErpiAttributesLastLocalState OBJECT-TYPE
SYNTAX G8032LastState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the current local state that is input to the ERPI state machine"
::= { genEquipProtocolsG8032ErpiAttributesEntry 7 }
genEquipProtocolsG8032ErpiAttributesLastRemoteState OBJECT-TYPE
SYNTAX G8032LastState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the last event received from the far end"
::= { genEquipProtocolsG8032ErpiAttributesEntry 8 }
genEquipProtocolsG8032ErpiAttributesMegLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates MEG LEVEL, when interoperating with SOAM"
::= { genEquipProtocolsG8032ErpiAttributesEntry 9 }
genEquipProtocolsG8032ErpiAttributesDownMep OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates if the ERPI is related to a down MEP and if to which one"
::= { genEquipProtocolsG8032ErpiAttributesEntry 10 }
genEquipProtocolsG8032ErpiAttributesRevertive OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the ERPI is revertive"
::= { genEquipProtocolsG8032ErpiAttributesEntry 11 }
genEquipProtocolsG8032ErpiAttributesRingState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the state in which id ERPI is assumed.
Possible states are: Initializing, Idle, Pending, Protecting, FS, MS)"
::= { genEquipProtocolsG8032ErpiAttributesEntry 12 }
genEquipProtocolsG8032ErpiAttributesRplOwner OBJECT-TYPE
SYNTAX INTEGER {
none(0),
west(1),
east(2),
sub-ring(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the ERPI is RPL owner and if such, which ERPI Port is the owner"
::= { genEquipProtocolsG8032ErpiAttributesEntry 13 }
genEquipProtocolsG8032ErpiAttributesSdHandling OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the ERPI takes into account SD (Signal Degraded) events (BER, capacity degradation)"
::= { genEquipProtocolsG8032ErpiAttributesEntry 14 }
genEquipProtocolsG8032ErpiAttributesServiceId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates Service ID of the ERPI"
::= { genEquipProtocolsG8032ErpiAttributesEntry 15 }
genEquipProtocolsG8032ErpiAttributesErpiType OBJECT-TYPE
SYNTAX INTEGER {
ring(0),
sub-ring(1),
ring-with-sub-ring(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ERPI Type ( ring / sub-ring / ring with sub-ring port)"
::= { genEquipProtocolsG8032ErpiAttributesEntry 16 }
genEquipProtocolsG8032ErpiAttributesVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the ERPI version number used in the ERPI protocol"
::= { genEquipProtocolsG8032ErpiAttributesEntry 17 }
genEquipProtocolsG8032ErpiAttributesVirtualChannel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN of virtual channel; 0 denotes no virtual channel"
::= { genEquipProtocolsG8032ErpiAttributesEntry 18 }
genEquipProtocolsG8032ErpiAttributesWtr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the ERPI WTR; units are minutes"
::= { genEquipProtocolsG8032ErpiAttributesEntry 19 }
genEquipProtocolsG8032ErpiAttributesRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProtocolsG8032ErpiAttributesEntry 30 }
--
-- G8032 ERP port attributes - g8032-erpi-port-attributes-table
--
genEquipProtocolsG8032ErpiPortAttributesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsG8032ErpiPortAttributesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing ERP port attributes."
::= { genEquipProtocolsG8032Erpi 11 }
genEquipProtocolsG8032ErpiPortAttributesEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsG8032ErpiPortAttributesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table entry containing ERP port attributes."
INDEX { genEquipProtocolsG8032ErpiPortAttributesErpiId,
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex}
::= { genEquipProtocolsG8032ErpiPortAttributesTable 1 }
GenEquipProtocolsG8032ErpiPortAttributesEntry ::=
SEQUENCE {
genEquipProtocolsG8032ErpiPortAttributesErpiId
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesActiveState
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiPortAttributesDataFwdState
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiPortAttributesDefectState
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesFs
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesMs
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesNr
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesRb
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesSd
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesSf
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesSpId
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol
IfMgrTrueFalse,
genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsFs
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsMs
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsNr
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsRb
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsSd
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesTxRapsSf
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesClearCommand
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesRowStatus
RowStatus,
genEquipProtocolsG8032ErpiPortAttributesFsCommand
INTEGER,
genEquipProtocolsG8032ErpiPortAttributesMsCommand
INTEGER,
}
genEquipProtocolsG8032ErpiPortAttributesErpiId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the ERPI ID"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 1 }
genEquipProtocolsG8032ErpiPortAttributesErpiIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"g8032_erp_port_sp_index"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 2 }
genEquipProtocolsG8032ErpiPortAttributesActiveState OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes if G8032 port (SP) is active for traffic forwarding or not"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 3 }
genEquipProtocolsG8032ErpiPortAttributesDataFwdState OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the port is forwarding or blocking data"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 4 }
genEquipProtocolsG8032ErpiPortAttributesDefectState OBJECT-TYPE
SYNTAX INTEGER {
no-defect(0),
sd-defect(1),
sf-defect(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the ERPI Port Oper-state derived from port. It is updates when Oper-state is changed."
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 5 }
genEquipProtocolsG8032ErpiPortAttributesRapsChannelFwdState OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the port is forwarding or blocking raps frames"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 6 }
genEquipProtocolsG8032ErpiPortAttributesRplLinkBlockState OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether the RPL is in blocking state. relevant only for RPL owner"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 7 }
genEquipProtocolsG8032ErpiPortAttributesRxInvalidRapsFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of invalid R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 8 }
genEquipProtocolsG8032ErpiPortAttributesRxRapsEvents OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of events R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 9 }
genEquipProtocolsG8032ErpiPortAttributesRxRapsFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 10 }
genEquipProtocolsG8032ErpiPortAttributesFs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of FS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 11 }
genEquipProtocolsG8032ErpiPortAttributesMs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of MS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 12 }
genEquipProtocolsG8032ErpiPortAttributesNr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of NR R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 13 }
genEquipProtocolsG8032ErpiPortAttributesRb OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RB R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 14 }
genEquipProtocolsG8032ErpiPortAttributesSd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SD R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 15 }
genEquipProtocolsG8032ErpiPortAttributesSf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SF R-APS PDU received"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 17 }
genEquipProtocolsG8032ErpiPortAttributesCapacityDegRatioThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The capacity degradation threshold, in percentage,
from which SD is indicated from this ERPI Port"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 18 }
genEquipProtocolsG8032ErpiPortAttributesSpId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point ID"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 19 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsCntrol OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When value is False, R-APS are not transmitted by ERPI Port"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 20 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsEvents OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of events R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 21 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Total R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 22 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsFs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of FS R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 23 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsMs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of MS R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 24 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsNr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of NR R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 25 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsRb OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of RB R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 26 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsSd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SD R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 27 }
genEquipProtocolsG8032ErpiPortAttributesTxRapsSf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SF R-APS PDU transmitted"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 28 }
genEquipProtocolsG8032ErpiPortAttributesClearCommand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear Command"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 29 }
genEquipProtocolsG8032ErpiPortAttributesRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 30 }
genEquipProtocolsG8032ErpiPortAttributesFsCommand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force Switch (FS)"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 31 }
genEquipProtocolsG8032ErpiPortAttributesMsCommand OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Manual Switch (MS)"
::= { genEquipProtocolsG8032ErpiPortAttributesEntry 32 }
genEquipProtocolsSoam OBJECT IDENTIFIER ::= {genEquipProtocols 4}
--
-- SOAM MEP Table - dot1ag-cfm-mep-table
--
genEquipProtocolsSoamMepTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsSoamMepEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containg MEP attributes."
::= { genEquipProtocolsSoam 10 }
genEquipProtocolsSoamMepEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsSoamMepEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table entry containg MEP attributes."
INDEX { genEquipProtocolsSoamMepMdIndex, genEquipProtocolsSoamMepMaIndex, genEquipProtocolsSoamMepMepIndentifier }
::= { genEquipProtocolsSoamMepTable 1 }
GenEquipProtocolsSoamMepEntry ::=
SEQUENCE {
genEquipProtocolsSoamMepMdIndex
INTEGER,
genEquipProtocolsSoamMepMaIndex
INTEGER,
genEquipProtocolsSoamMepMepIndentifier
INTEGER,
genEquipProtocolsSoamMepSpId
INTEGER,
genEquipProtocolsSoamMepLastSessionLbmOut
INTEGER,
genEquipProtocolsSoamMepLastSessionlbmToSend
INTEGER,
genEquipProtocolsSoamMepLastSessionLbrIn
INTEGER,
genEquipProtocolsSoamMepLastSessionlbState
LBState,
genEquipProtocolsSoamMepLbmOut
INTEGER
}
genEquipProtocolsSoamMepMdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MD Index"
::= { genEquipProtocolsSoamMepEntry 1 }
genEquipProtocolsSoamMepMaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MA/MEG Index"
::= { genEquipProtocolsSoamMepEntry 2 }
genEquipProtocolsSoamMepMepIndentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MEP ID"
::= { genEquipProtocolsSoamMepEntry 3 }
genEquipProtocolsSoamMepSpId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point ID"
::= { genEquipProtocolsSoamMepEntry 4 }
genEquipProtocolsSoamMepLastSessionLbmOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LBM frames transmitted during the current/last session"
::= { genEquipProtocolsSoamMepEntry 5 }
genEquipProtocolsSoamMepLastSessionlbmToSend OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LBM frames left to send in the session"
::= { genEquipProtocolsSoamMepEntry 6 }
genEquipProtocolsSoamMepLastSessionLbrIn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LBR messages received during the current/last session"
::= { genEquipProtocolsSoamMepEntry 7 }
genEquipProtocolsSoamMepLastSessionlbState OBJECT-TYPE
SYNTAX LBState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the loopback session State"
::= { genEquipProtocolsSoamMepEntry 8 }
genEquipProtocolsSoamMepLbmOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the mumber of the LBM frames transmitted"
::= { genEquipProtocolsSoamMepEntry 9 }
--
-- SOAM MA/MEG Network Table - dot1ag-cfm-ma-mef-net-table
--
genEquipProtocolsSoamMegTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProtocolsSoamMegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing SOAM MA/MEG network identical attributes common to 802.1ag."
::= { genEquipProtocolsSoam 11 }
genEquipProtocolsSoamMegEntry OBJECT-TYPE
SYNTAX GenEquipProtocolsSoamMegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table entry containing SOAM MA/MEG network identical attributes common to 802.1ag."
INDEX { genEquipProtocolsSoamMegMdIndex, genEquipProtocolsSoamMegMaIndex }
::= { genEquipProtocolsSoamMegTable 1 }
GenEquipProtocolsSoamMegEntry ::=
SEQUENCE {
genEquipProtocolsSoamMegMdIndex
INTEGER,
genEquipProtocolsSoamMegMaIndex
INTEGER,
genEquipProtocolsSoamMegServiceId
INTEGER
}
genEquipProtocolsSoamMegMdIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MD Index"
::= { genEquipProtocolsSoamMegEntry 1 }
genEquipProtocolsSoamMegMaIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MA/MEG Index"
::= { genEquipProtocolsSoamMegEntry 2 }
genEquipProtocolsSoamMegServiceId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service ID"
::= { genEquipProtocolsSoamMegEntry 3 }
-- TDM Trails
genEquipTdmTrails OBJECT IDENTIFIER ::= {genEquipServices 2}
genEquipTdmTrailsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTdmTrailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"TDM Trails configuration and status table."
::= { genEquipTdmTrails 1 }
genEquipTdmTrailsEntry OBJECT-TYPE
SYNTAX GenEquipTdmTrailsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"TDM Trails PM table."
INDEX { genEquipTdmTrailID }
::= { genEquipTdmTrailsTable 1 }
GenEquipTdmTrailsEntry ::=
SEQUENCE {
genEquipTdmTrailID
DisplayString,
genEquipTdmTrailDescr
DisplayString,
genEquipTdmTrailProtected
INTEGER,
genEquipTdmTrailAcmPrio
INTEGER,
genEquipTdmTrailOperStatus
INTEGER,
genEquipTdmTrailAlarmStatus
INTEGER,
genEquipTdmTrailSrcSlot
INTEGER,
genEquipTdmTrailSrcType
TrailIfType,
genEquipTdmTrailSrcNum
INTEGER,
genEquipTdmTrailDest1Slot
INTEGER,
genEquipTdmTrailDest1Type
TrailIfType,
genEquipTdmTrailDest1Num
INTEGER,
genEquipTdmTrailDest2Slot
INTEGER,
genEquipTdmTrailDest2Type
TrailIfType,
genEquipTdmTrailDest2Num
INTEGER,
genEquipTdmTrailProtectedForceActive
TrailProtectedType,
genEquipTdmTrailProtectedActiveTrail
TrailProtectedType,
genEquipTdmTrailProtectedNumOfSwitches
INTEGER,
genEquipTdmTrailPrimaryPathAlarmStatus
INTEGER,
genEquipTdmTrailSecondaryPathAlarmStatus
INTEGER,
genEquipTdmTrailRowStatus
RowStatus
}
genEquipTdmTrailID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Trail ID. This parameter is the index of the table."
::= { genEquipTdmTrailsEntry 1 }
genEquipTdmTrailDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trail description."
::= { genEquipTdmTrailsEntry 2 }
genEquipTdmTrailProtected OBJECT-TYPE
SYNTAX INTEGER {
unProtected(0),
protected(1),
protectedAbr(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates whether the trail is protected or not."
::= { genEquipTdmTrailsEntry 3 }
genEquipTdmTrailAcmPrio OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ACM priority of the trail. In case of High priority TDM trail, ACM is enabled on the link and there is a reduction
of the link capacity, this trail will be prioritized before the low priority trails to be dropped."
::= { genEquipTdmTrailsEntry 4 }
genEquipTdmTrailOperStatus OBJECT-TYPE
SYNTAX INTEGER {
reserved(0),
operational(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the TDM trail. in operational case, the trail is active/enabled and send alarms."
::= { genEquipTdmTrailsEntry 5 }
genEquipTdmTrailAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the trail active path.
The value is a Bit Map: Id-Mismatch(0x01),
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
::= { genEquipTdmTrailsEntry 6 }
genEquipTdmTrailSrcSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trail source slot number."
::= { genEquipTdmTrailsEntry 7 }
genEquipTdmTrailSrcType OBJECT-TYPE
SYNTAX TrailIfType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of the source interface of the trail line(0), radio(1),stm-1-oc-3(2), sync(4)."
::= { genEquipTdmTrailsEntry 8 }
genEquipTdmTrailSrcNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interface number, for example E1 number 5. in case of a line."
::= { genEquipTdmTrailsEntry 9 }
genEquipTdmTrailDest1Slot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The slot destination of the trail."
::= { genEquipTdmTrailsEntry 10 }
genEquipTdmTrailDest1Type OBJECT-TYPE
SYNTAX TrailIfType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interface type destination of the trail."
::= { genEquipTdmTrailsEntry 11 }
genEquipTdmTrailDest1Num OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The destination interface number."
::= { genEquipTdmTrailsEntry 12 }
genEquipTdmTrailDest2Slot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A secondary slot number that is being used when protection is enabled. "
::= { genEquipTdmTrailsEntry 13 }
genEquipTdmTrailDest2Type OBJECT-TYPE
SYNTAX TrailIfType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A secondary interface type that is being used when protection is enabled."
::= { genEquipTdmTrailsEntry 14 }
genEquipTdmTrailDest2Num OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A secondary interface number that is being used when protection is enabled."
::= { genEquipTdmTrailsEntry 15 }
genEquipTdmTrailProtectedForceActive OBJECT-TYPE
SYNTAX TrailProtectedType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force active of the primary or the secondary trails."
::= { genEquipTdmTrailsEntry 16 }
genEquipTdmTrailProtectedActiveTrail OBJECT-TYPE
SYNTAX TrailProtectedType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The trail current active path. That tells us Who is the active trail."
::= { genEquipTdmTrailsEntry 17 }
genEquipTdmTrailProtectedNumOfSwitches OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value represent the number of switches in SNCP between the primary and secondary trails.
Setting this value to 0, clears this counter"
::= { genEquipTdmTrailsEntry 18 }
genEquipTdmTrailPrimaryPathAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the trail primary path.
The value is a Bit Map: Id-Mismatch(0x01),
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
::= { genEquipTdmTrailsEntry 19 }
genEquipTdmTrailSecondaryPathAlarmStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The alarm status of the trail secondary path.
The value is a Bit Map: Id-Mismatch(0x01),
Excessive-Ber(0x02), Signal-Degrade-Ber(0x04),
Invalid-Trail-Status(0x08), Signal-Failure(0x10), RDI-Detected(0x20)."
::= { genEquipTdmTrailsEntry 20 }
genEquipTdmTrailRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Row status of the entry."
::= { genEquipTdmTrailsEntry 30 }
-- Protected trail force active all trails command
genEquipTdmTrailsProtectedForceActiveAllCmd OBJECT-TYPE
SYNTAX TrailProtectedType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force all active trails to be either primary or secondary."
::= { genEquipTdmTrails 2 }
-- Protected trail force operational or reserved all trails command
genEquipTdmTrailsProtectedForceOperationalOrReservedCmd OBJECT-TYPE
SYNTAX INTEGER {
reserved(0),
operational(1),
idle(30)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force all active trails to be either operational or reserved."
::= { genEquipTdmTrails 3 }
genEquipTdmTrailsProtectedRevertiveSwitchTimeout OBJECT-TYPE
SYNTAX INTEGER (0..1800)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The revertive switch timeout in seconds for revertive protected trails."
::= { genEquipTdmTrails 4 }
genEquipTdmTrailsSwitchCounterClear OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter will clear the counter for protected switches."
::= { genEquipTdmTrails 5 }
genEquipTdmTrailsDeleteAllTrails OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter will delete all existing trails."
::= { genEquipTdmTrails 6 }
-- Synchronization
genEquipSynchronization OBJECT IDENTIFIER ::= {genEquipServices 3}
genEquipSynchronizationSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipSynchronizationSrcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Synchronization source table."
::= { genEquipSynchronization 1 }
genEquipSynchronizationSrcEntry OBJECT-TYPE
SYNTAX GenEquipSynchronizationSrcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Synchronization source table."
INDEX { genEquipSynchronizationSrcPriority }
::= { genEquipSynchronizationSrcTable 1 }
GenEquipSynchronizationSrcEntry ::=
SEQUENCE {
genEquipSynchronizationSrcPriority
INTEGER,
genEquipSynchronizationSrcSlot
INTEGER,
genEquipSynchronizationSrcType
INTEGER,
genEquipSynchronizationSrcNum
INTEGER,
genEquipSynchronizationSrcValid
INTEGER,
genEquipSynchronizationSrcTrail
EnableDisable,
genEquipSynchronizationSrcAdmin
EnableDisable,
genEquipSynchronizationSrcQuality
INTEGER,
genEquipSynchronizationSrcReceivedSSM
INTEGER,
genEquipSynchronizationSrcQualityStatus
INTEGER
}
genEquipSynchronizationSrcPriority OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source for system synchronization (primary, seconday)."
::= { genEquipSynchronizationSrcEntry 1 }
genEquipSynchronizationSrcSlot OBJECT-TYPE
SYNTAX SlotId
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The slot number of the sync source (1..6).
Possible values:
- standalone(0)
- slot1(1)
- slot2(2)
- slot3(3)
- slot4(4)
- slot5(5)
- slot6(6)"
::= { genEquipSynchronizationSrcEntry 2 }
genEquipSynchronizationSrcType OBJECT-TYPE
SYNTAX INTEGER {
unknown(-1),
line(0),
radio-ch(1),
stm-vc(2),
pw(3),
stm-signal(4),
ether(5),
pw-reference-clock(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interface type (line (PDH), Radio, STM-1/OC-3), or signal coming from the PW card."
::= { genEquipSynchronizationSrcEntry 3 }
genEquipSynchronizationSrcNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sync source number: VC in STM-1/OC-3, Radio channel in case the interface is Radio, or E1 number in
case the interface is PDH (E1s)."
::= { genEquipSynchronizationSrcEntry 4 }
genEquipSynchronizationSrcValid OBJECT-TYPE
SYNTAX INTEGER {
not-valid(0),
valid(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This paremter is the source status, if the source if valid or not.
In case it is valid, it means that the clock being extracted from the source is ok and can be used.
In case it is not-valid the source is not in use, each interface will have it's own clock."
::= { genEquipSynchronizationSrcEntry 5 }
genEquipSynchronizationSrcTrail OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates whether the synchronization source is the
signal of an existing co-located TDM trail used for traffic.
Enabling this parameter in an interface which does not belong to a trail will fail,
as well as disabling it for an interface which belongs to a trail."
::= { genEquipSynchronizationSrcEntry 6 }
genEquipSynchronizationSrcAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Admin state of the sync source (the sync source is enabled or disabled)."
::= { genEquipSynchronizationSrcEntry 7 }
genEquipSynchronizationSrcQuality OBJECT-TYPE
SYNTAX INTEGER {
automatic(0),
prs(1),
g811(2),
transit-node(3),
ssu-a(4),
unknown(5),
stratum2(7),
ssu-b(8),
stratum3(10),
g813-8262(11),
smc(12),
stratum3e(13),
do-not-use (15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"parameter configures the quality of the incoming clock signal."
::= { genEquipSynchronizationSrcEntry 8 }
genEquipSynchronizationSrcReceivedSSM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter shows the current value of the received SSM messages."
::= { genEquipSynchronizationSrcEntry 9 }
genEquipSynchronizationSrcQualityStatus OBJECT-TYPE
SYNTAX INTEGER {
automatic(0),
prs(1),
g811(2),
transit-node(3),
ssu-a(4),
unknown(5),
stratum2(7),
ssu-b(8),
stratum3(10),
g813-8262(11),
smc(12),
stratum3e(13),
do-not-use(15),
failure(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter shows the current quality level of the interface."
::= { genEquipSynchronizationSrcEntry 10 }
-- PW services configuration
genEquipServicesPW OBJECT IDENTIFIER ::= {genEquipServices 4}
genEquipServicesPWBundlesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWBundlesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of DS0 bundles.
Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable."
::= { genEquipServicesPW 1 }
genEquipServicesPWBundlesEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWBundlesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of DS0 bundles.
Notice that the bundle description is not located in this table but in table genEquipServicesPWBundlesDescriptionTable."
INDEX { genEquipServicesPWBundlesDs0List, genEquipServicesPWBundlesBundleId }
::= { genEquipServicesPWBundlesTable 1 }
GenEquipServicesPWBundlesEntry ::=
SEQUENCE {
genEquipServicesPWBundlesBundleId
INTEGER,
genEquipServicesPWBundlesDs0List
INTEGER,
genEquipServicesPWBundlesRowStatus
RowStatus
}
genEquipServicesPWBundlesBundleId OBJECT-TYPE
SYNTAX INTEGER (1..496)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unique DS0 bundle ID."
::= { genEquipServicesPWBundlesEntry 1 }
genEquipServicesPWBundlesDs0List OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DS0 slot number belonging to a bundle."
::= { genEquipServicesPWBundlesEntry 2 }
genEquipServicesPWBundlesRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWBundlesEntry 30 }
-- genEquipServicesPWBundlesDescriptionTable
genEquipServicesPWBundlesDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWBundlesDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of DS0 bundles description.
Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable."
::= { genEquipServicesPW 2 }
genEquipServicesPWBundlesDescriptionEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWBundlesDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of DS0 bundles description.
Notice that the bundle configuration itself is not located in this table but in table genEquipServicesPWBundlesTable."
INDEX { genEquipServicesPWBundlesDescriptionBundleId }
::= { genEquipServicesPWBundlesDescriptionTable 1 }
GenEquipServicesPWBundlesDescriptionEntry ::=
SEQUENCE {
genEquipServicesPWBundlesDescriptionBundleId
INTEGER,
genEquipServicesPWBundlesDescriptionBundleDesc
DisplayString,
genEquipServicesPWBundlesDescriptionBundleAdmin
EnableDisable,
genEquipServicesPWBundlesDescriptionBundleOperStatus
INTEGER,
genEquipServicesPWBundlesDescriptionBundleTdmPort
INTEGER,
genEquipServicesPWBundlesDescriptionRowStatus
RowStatus
}
genEquipServicesPWBundlesDescriptionBundleId OBJECT-TYPE
SYNTAX INTEGER (1..496)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unique DS0 bundle ID."
::= { genEquipServicesPWBundlesDescriptionEntry 1 }
genEquipServicesPWBundlesDescriptionBundleDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DS0 bundle description."
::= { genEquipServicesPWBundlesDescriptionEntry 2 }
genEquipServicesPWBundlesDescriptionBundleAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Admin."
::= { genEquipServicesPWBundlesDescriptionEntry 3 }
genEquipServicesPWBundlesDescriptionBundleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Operational status."
::= { genEquipServicesPWBundlesDescriptionEntry 4 }
genEquipServicesPWBundlesDescriptionBundleTdmPort OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port from which the channels are assigned to the bundle."
::= { genEquipServicesPWBundlesDescriptionEntry 5 }
genEquipServicesPWBundlesDescriptionRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWBundlesDescriptionEntry 30 }
-- PW PSN tunnels Table
genEquipServicesPWPSNTunnelsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of PSN encapsulations meant for pseudowire services."
::= { genEquipServicesPW 3 }
genEquipServicesPWPSNTunnelsEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWPSNTunnelsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of PSN encapsulations meant for pseudowire services."
INDEX { genEquipServicesPWPSNTunnelsSlotNumber, genEquipServicesPWPSNTunnelsTunnelId }
::= { genEquipServicesPWPSNTunnelsTable 1 }
GenEquipServicesPWPSNTunnelsEntry ::=
SEQUENCE {
genEquipServicesPWPSNTunnelsSlotNumber
INTEGER,
genEquipServicesPWPSNTunnelsTunnelId
INTEGER,
genEquipServicesPWPSNTunnelsPsnType
INTEGER,
genEquipServicesPWPSNTunnelsSVid
INTEGER,
genEquipServicesPWPSNTunnelsCVid
EnableDisable,
genEquipServicesPWPSNTunnelsPBits
INTEGER,
genEquipServicesPWPSNTunnelsDestIpAddr
IpAddress,
genEquipServicesPWPSNTunnelsDestIpSubnet
IpAddress,
genEquipServicesPWPSNTunnelsNextHopIp
IpAddress,
genEquipServicesPWPSNTunnelsTosDscp
INTEGER,
genEquipServicesPWPSNTunnelsRemoteMacAddr
OCTET STRING,
genEquipServicesPWPSNTunnelsSourceIpAddr
IpAddress,
genEquipServicesPWPSNTunnelsSourceMacAddr
OCTET STRING,
-- New part
genEquipServicesPWPSNTunnelsStatus
DownUp,
genEquipServicesPWPSNTunnelsSourceMPLSLabel
INTEGER,
genEquipServicesPWPSNTunnelsDestinationMPLSLabel
INTEGER,
genEquipServicesPWPSNTunnelsMPLSexp
INTEGER,
genEquipServicesPWPSNTunnelsVlanType
PWTunnelVlanType,
genEquipServicesPWPSNTunnelsVid
INTEGER,
genEquipServicesPWPSNTunnelsMAid
INTEGER,
genEquipServicesPWPSNTunnelsRowStatus
RowStatus
}
genEquipServicesPWPSNTunnelsSlotNumber OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Slot number where the relevant PW card is inserted."
::= { genEquipServicesPWPSNTunnelsEntry 1 }
genEquipServicesPWPSNTunnelsTunnelId OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel ID."
::= { genEquipServicesPWPSNTunnelsEntry 2 }
genEquipServicesPWPSNTunnelsPsnType OBJECT-TYPE
SYNTAX INTEGER {
udpip(0),
ethernet(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Psn type supported by this tunnel."
::= { genEquipServicesPWPSNTunnelsEntry 3 }
genEquipServicesPWPSNTunnelsSVid OBJECT-TYPE
SYNTAX INTEGER (0..4091)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel S-VLAN Id."
::= { genEquipServicesPWPSNTunnelsEntry 4 }
genEquipServicesPWPSNTunnelsCVid OBJECT-TYPE
SYNTAX INTEGER (0..4091)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel C-VLAN Id."
::= { genEquipServicesPWPSNTunnelsEntry 5 }
genEquipServicesPWPSNTunnelsPBits OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel P-bits."
::= { genEquipServicesPWPSNTunnelsEntry 6 }
genEquipServicesPWPSNTunnelsDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP Address for UDP/IP PSN tunnel."
::= { genEquipServicesPWPSNTunnelsEntry 7 }
genEquipServicesPWPSNTunnelsDestIpSubnet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP Subnet for UDP/IP PSN tunnel."
::= { genEquipServicesPWPSNTunnelsEntry 8 }
genEquipServicesPWPSNTunnelsNextHopIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Next hop IP Address for UDP/IP PSN tunnel."
::= { genEquipServicesPWPSNTunnelsEntry 9 }
genEquipServicesPWPSNTunnelsTosDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel ToS (DSCP)."
::= { genEquipServicesPWPSNTunnelsEntry 10 }
genEquipServicesPWPSNTunnelsRemoteMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote MAC Adress."
::= { genEquipServicesPWPSNTunnelsEntry 11 }
genEquipServicesPWPSNTunnelsSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP Address."
::= { genEquipServicesPWPSNTunnelsEntry 12 }
genEquipServicesPWPSNTunnelsSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source MAC Address."
::= { genEquipServicesPWPSNTunnelsEntry 13 }
genEquipServicesPWPSNTunnelsStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel admin."
::= { genEquipServicesPWPSNTunnelsEntry 14 }
genEquipServicesPWPSNTunnelsSourceMPLSLabel OBJECT-TYPE
SYNTAX INTEGER (16..1048575)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source MPLS Label."
::= { genEquipServicesPWPSNTunnelsEntry 15 }
genEquipServicesPWPSNTunnelsDestinationMPLSLabel OBJECT-TYPE
SYNTAX INTEGER (16..1048575)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination MPLS label."
::= { genEquipServicesPWPSNTunnelsEntry 16 }
genEquipServicesPWPSNTunnelsMPLSexp OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MPLS Experimental field."
::= { genEquipServicesPWPSNTunnelsEntry 17 }
genEquipServicesPWPSNTunnelsVlanType OBJECT-TYPE
SYNTAX PWTunnelVlanType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN)."
::= { genEquipServicesPWPSNTunnelsEntry 18 }
genEquipServicesPWPSNTunnelsVid OBJECT-TYPE
SYNTAX INTEGER (0..4094)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel VLAN ID."
::= { genEquipServicesPWPSNTunnelsEntry 19 }
genEquipServicesPWPSNTunnelsMAid OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association Id."
::= { genEquipServicesPWPSNTunnelsEntry 20 }
genEquipServicesPWPSNTunnelsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWPSNTunnelsEntry 30 }
-- PW Profiles Configuration Table
genEquipServicesPWProfilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWProfilesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of pseudowire profiles.
These profiles are used when configuring PW services in table genEquipServicesPWServiceTable."
::= { genEquipServicesPW 4 }
genEquipServicesPWProfilesEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWProfilesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of pseudowire profiles.
These profiles are used when configuring PW services in table genEquipServicesPWServiceTable."
INDEX { genEquipServicesPWProfilesPWProfileId }
::= { genEquipServicesPWProfilesTable 1 }
GenEquipServicesPWProfilesEntry ::=
SEQUENCE {
genEquipServicesPWProfilesPWProfileId
INTEGER,
genEquipServicesPWProfilesPayloadSize
INTEGER,
genEquipServicesPWProfilesJitterBufferDepth
INTEGER,
genEquipServicesPWProfilesLopsDetection
EnableDisable,
genEquipServicesPWProfilesRtpHeaderUsed
NoYes,
genEquipServicesPWProfilesRtpTimestampMode
PWRtpTimeStampMode,
genEquipServicesPWProfilesRtpTimestampAbsFactor
INTEGER,
genEquipServicesPWProfilesPayloadSuppression
EnableDisable,
genEquipServicesPWProfilesPayloadType
INTEGER,
genEquipServicesPWProfilesConseqPacketsInSync
INTEGER,
genEquipServicesPWProfilesConseqMissPktsOutSync
INTEGER,
genEquipServicesPWProfilesPktLossTimeWindow
INTEGER,
genEquipServicesPWProfilesExcessivePktLossThresh
INTEGER,
genEquipServicesPWProfilesAlarmThresh
INTEGER,
genEquipServicesPWProfilesClearAlarmThresh
INTEGER,
genEquipServicesPWProfilesMissingPktsToSes
INTEGER,
genEquipServicesPWProfilesDs0Filler
INTEGER,
genEquipServicesPWProfilesCasAlarmPattern
INTEGER,
genEquipServicesPWProfilesRowStatus
RowStatus
}
genEquipServicesPWProfilesPWProfileId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique PW profile ID."
::= { genEquipServicesPWProfilesEntry 1 }
genEquipServicesPWProfilesPayloadSize OBJECT-TYPE
SYNTAX INTEGER (0..1500)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Payload size in bytes."
::= { genEquipServicesPWProfilesEntry 2 }
genEquipServicesPWProfilesJitterBufferDepth OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation"
::= { genEquipServicesPWProfilesEntry 3 }
genEquipServicesPWProfilesLopsDetection OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled, LOPS detection is supported."
::= { genEquipServicesPWProfilesEntry 4 }
genEquipServicesPWProfilesRtpHeaderUsed OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If set to False: an RTP header is not pre-pended to the TDM packet."
::= { genEquipServicesPWProfilesEntry 5 }
genEquipServicesPWProfilesRtpTimestampMode OBJECT-TYPE
SYNTAX PWRtpTimeStampMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RTP timestamp mode"
::= { genEquipServicesPWProfilesEntry 6 }
genEquipServicesPWProfilesRtpTimestampAbsFactor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Multiplication factor for 8KHz units in absolute mode of RTP timestamping."
::= { genEquipServicesPWProfilesEntry 7 }
genEquipServicesPWProfilesPayloadSuppression OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Payload suppression."
::= { genEquipServicesPWProfilesEntry 8 }
genEquipServicesPWProfilesPayloadType OBJECT-TYPE
SYNTAX INTEGER (1..123)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Payload type."
::= { genEquipServicesPWProfilesEntry 9 }
genEquipServicesPWProfilesConseqPacketsInSync OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of consecutive packets with sequential sequence numbers required to exit LOPS."
::= { genEquipServicesPWProfilesEntry 10 }
genEquipServicesPWProfilesConseqMissPktsOutSync OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of consecutive missing packets required to enter LOPS."
::= { genEquipServicesPWProfilesEntry 11 }
genEquipServicesPWProfilesPktLossTimeWindow OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time for computing average packet loss rate to detect excessive packet loss."
::= { genEquipServicesPWProfilesEntry 12 }
genEquipServicesPWProfilesExcessivePktLossThresh OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Alarm threshold (in percent) for excessive packet loss."
::= { genEquipServicesPWProfilesEntry 13 }
genEquipServicesPWProfilesAlarmThresh OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay (in msecs) for persistent alarm setting."
::= { genEquipServicesPWProfilesEntry 14 }
genEquipServicesPWProfilesClearAlarmThresh OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay (in msecs) for persistent alarm clearing."
::= { genEquipServicesPWProfilesEntry 15 }
genEquipServicesPWProfilesMissingPktsToSes OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Percent of missing packets detected in 1 second window to cause SES to be counted."
::= { genEquipServicesPWProfilesEntry 16 }
genEquipServicesPWProfilesDs0Filler OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer."
::= { genEquipServicesPWProfilesEntry 17 }
genEquipServicesPWProfilesCasAlarmPattern OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer."
::= { genEquipServicesPWProfilesEntry 18 }
genEquipServicesPWProfilesRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWProfilesEntry 30 }
-- PW Service Configuration Table
genEquipServicesPWServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
and profiles to a service."
::= { genEquipServicesPW 5 }
genEquipServicesPWServiceEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of pseudowire services, by assigning TDM ports or bundles, PSN tunnels,
and profiles to a service."
INDEX { genEquipServicesPWServicePWId }
::= { genEquipServicesPWServiceTable 1 }
GenEquipServicesPWServiceEntry ::=
SEQUENCE {
genEquipServicesPWServicePWId
INTEGER,
genEquipServicesPWServicePWType
INTEGER,
genEquipServicesPWServicePsnType
INTEGER,
genEquipServicesPWServiceTdmPort
INTEGER,
genEquipServicesPWServiceDs0bundle
INTEGER,
genEquipServicesPWServiceTdmProfileId
INTEGER,
genEquipServicesPWServicePsnTunnelProtection
EnableDisable,
genEquipServicesPWServicePsnTunnelOrGroupId
INTEGER,
genEquipServicesPWServiceSrcUdpPortOrEcid
INTEGER,
genEquipServicesPWServiceDstUdpPortOrEcid
INTEGER,
genEquipServicesPWServiceAdmin
EnableDisable,
genEquipServicesPWServiceCrReference
EnableDisable,
genEquipServicesPWServiceOperStatus
EnableDisable,
genEquipServicesPWServiceRowStatus
RowStatus
}
genEquipServicesPWServicePWId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pseudo Wire ID."
::= { genEquipServicesPWServiceEntry 1 }
genEquipServicesPWServicePWType OBJECT-TYPE
SYNTAX INTEGER {
e1-satop(0),
cespsn(1),
cas-cespsn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PW type. E1-satop denotes SAToP. Cespsn Denotes CESoP without CAS signalling,
and cas-cespsn denotes CESoP with CAS signalling."
::= { genEquipServicesPWServiceEntry 2 }
genEquipServicesPWServicePsnType OBJECT-TYPE
SYNTAX INTEGER {
udpip(0),
eth(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation."
::= { genEquipServicesPWServiceEntry 3 }
genEquipServicesPWServiceTdmPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of TDM port (for SATOP). This parameter must be zero for CESoP."
::= { genEquipServicesPWServiceEntry 4 }
genEquipServicesPWServiceDs0bundle OBJECT-TYPE
SYNTAX INTEGER (1..496)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP."
::= { genEquipServicesPWServiceEntry 5 }
genEquipServicesPWServiceTdmProfileId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM configuration profile ID."
::= { genEquipServicesPWServiceEntry 6 }
genEquipServicesPWServicePsnTunnelProtection OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel protection mode."
::= { genEquipServicesPWServiceEntry 7 }
genEquipServicesPWServicePsnTunnelOrGroupId OBJECT-TYPE
SYNTAX INTEGER (1..512)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel."
::= { genEquipServicesPWServiceEntry 8 }
genEquipServicesPWServiceSrcUdpPortOrEcid OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source UDP Port for UDP IP tunnel or ECID for Ethernet tunnel."
::= { genEquipServicesPWServiceEntry 9 }
genEquipServicesPWServiceDstUdpPortOrEcid OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination UDP Port for UDP IP tunnel or ECID for Ethernet tunnel."
::= { genEquipServicesPWServiceEntry 10 }
genEquipServicesPWServiceAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Admin status."
::= { genEquipServicesPWServiceEntry 11 }
genEquipServicesPWServiceCrReference OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock recovery reference."
::= { genEquipServicesPWServiceEntry 12 }
genEquipServicesPWServiceOperStatus OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Operational status."
::= { genEquipServicesPWServiceEntry 13 }
genEquipServicesPWServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWServiceEntry 30 }
--
-- NG PW Services
--
genEquipServicesNGPW OBJECT IDENTIFIER ::= {genEquipServicesPW 6}
--
-- Bundle channel list configuration table - pw-bundle-channel-list-configuration-table
--
genEquipServicesNGPWBundlesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows definition of the group of timeslots comprising a bundle."
::= { genEquipServicesNGPW 1 }
genEquipServicesNGPWBundlesEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWBundlesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows definition of the group of timeslots comprising a bundle."
INDEX { genEquipServicesNGPWBundlesSlotId, genEquipServicesNGPWBundlesTdmPort, genEquipServicesNGPWBundlesDs0List }
::= { genEquipServicesNGPWBundlesTable 1 }
GenEquipServicesNGPWBundlesEntry ::=
SEQUENCE {
genEquipServicesNGPWBundlesSlotId
INTEGER,
genEquipServicesNGPWBundlesTdmPort
INTEGER,
genEquipServicesNGPWBundlesDs0List
INTEGER,
genEquipServicesNGPWBundlesIfIndex
INTEGER,
genEquipServicesNGPWBundlesBundleId
INTEGER,
genEquipServicesNGPWBundlesRowStatus
RowStatus
}
genEquipServicesNGPWBundlesSlotId OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWBundlesEntry 1 }
genEquipServicesNGPWBundlesTdmPort OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"TDM Port number."
::= { genEquipServicesNGPWBundlesEntry 2 }
genEquipServicesNGPWBundlesDs0List OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timeslot number to be included in a bundle."
::= { genEquipServicesNGPWBundlesEntry 3 }
genEquipServicesNGPWBundlesIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"iIndex."
::= { genEquipServicesNGPWBundlesEntry 4 }
genEquipServicesNGPWBundlesBundleId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bundle ID."
::= { genEquipServicesNGPWBundlesEntry 5 }
genEquipServicesNGPWBundlesRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWBundlesEntry 30 }
--
-- Bundle configuration table - pw-bundle-configuration-table
--
genEquipServicesNGPWBundlesDescriptionTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuring admin state and description for bundles."
::= { genEquipServicesNGPW 2 }
genEquipServicesNGPWBundlesDescriptionEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWBundlesDescriptionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuring admin state and description for bundles."
INDEX { genEquipServicesNGPWBundlesDescriptionSlotId, genEquipServicesNGPWBundlesDescriptionBundleId }
::= { genEquipServicesNGPWBundlesDescriptionTable 1 }
GenEquipServicesNGPWBundlesDescriptionEntry ::=
SEQUENCE {
genEquipServicesNGPWBundlesDescriptionSlotId
INTEGER,
genEquipServicesNGPWBundlesDescriptionBundleId
INTEGER,
genEquipServicesNGPWBundlesDescriptionAdmin
EnableDisableSMI2,
genEquipServicesNGPWBundlesDescriptionBundleDesc
DisplayString,
genEquipServicesNGPWBundlesDescriptionRowStatus
RowStatus
}
genEquipServicesNGPWBundlesDescriptionSlotId OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWBundlesDescriptionEntry 1 }
genEquipServicesNGPWBundlesDescriptionBundleId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bundle ID."
::= { genEquipServicesNGPWBundlesDescriptionEntry 2 }
genEquipServicesNGPWBundlesDescriptionAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bundle administrative state."
::= { genEquipServicesNGPWBundlesDescriptionEntry 3 }
genEquipServicesNGPWBundlesDescriptionBundleDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bundle description."
::= { genEquipServicesNGPWBundlesDescriptionEntry 4 }
genEquipServicesNGPWBundlesDescriptionRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWBundlesDescriptionEntry 30 }
--
-- PW profile configuraiton table - pw-profile-configuration-table
--
genEquipServicesNGPWProfilesTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWProfilesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of PW service profiles."
::= { genEquipServicesNGPW 3 }
genEquipServicesNGPWProfilesEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWProfilesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of PW service profiles."
INDEX { genEquipServicesNGPWProfilesPWProfileId }
::= { genEquipServicesNGPWProfilesTable 1 }
GenEquipServicesNGPWProfilesEntry ::=
SEQUENCE {
genEquipServicesNGPWProfilesPWProfileId
INTEGER,
genEquipServicesNGPWProfilesPayloadSize
INTEGER,
genEquipServicesNGPWProfilesJitterBufferDepth
INTEGER,
genEquipServicesNGPWProfilesPayloadSuppression
EnableDisableSMI2,
genEquipServicesNGPWProfilesPayloadType
INTEGER,
genEquipServicesNGPWProfilesDs0Filler
INTEGER,
genEquipServicesNGPWProfilesCasAlarmPattern
INTEGER,
genEquipServicesNGPWProfilesRtpHeaderUsed
EnableDisableSMI2,
genEquipServicesNGPWProfilesRtpTimestampMode
PWRtpTimeStampMode,
genEquipServicesNGPWProfilesRtpTimestampAbsFactor
INTEGER,
genEquipServicesNGPWProfilesLopsDetection
EnableDisableSMI2,
genEquipServicesNGPWProfilesConseqPacketsInSync
INTEGER,
genEquipServicesNGPWProfilesConseqMissPktsOutSync
INTEGER,
genEquipServicesNGPWProfilesPktLossTimeWindow
INTEGER,
genEquipServicesNGPWProfilesExcessivePktLossThresh
INTEGER,
genEquipServicesNGPWProfilesAlarmThresh
INTEGER,
genEquipServicesNGPWProfilesClearAlarmThresh
INTEGER,
genEquipServicesNGPWProfilesMissingPktsToSes
INTEGER,
genEquipServicesNGPWProfilesRowStatus
RowStatus
}
genEquipServicesNGPWProfilesPWProfileId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique PW profile ID."
::= { genEquipServicesNGPWProfilesEntry 1 }
genEquipServicesNGPWProfilesPayloadSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Payload size, in terms of TDM frames in each packet."
::= { genEquipServicesNGPWProfilesEntry 2 }
genEquipServicesNGPWProfilesJitterBufferDepth OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Jitter buffer depth (in milliseconds) to allow accommodation to the PSN-specific packet delay variation."
::= { genEquipServicesNGPWProfilesEntry 3 }
genEquipServicesNGPWProfilesPayloadSuppression OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, payload is suppresed upon incoming TDM failure."
::= { genEquipServicesNGPWProfilesEntry 4 }
genEquipServicesNGPWProfilesPayloadType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Payload type byte."
::= { genEquipServicesNGPWProfilesEntry 5 }
genEquipServicesNGPWProfilesDs0Filler OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Byte pattern transmitted on ds0 channels when packets over/underflow the jitter buffer."
::= { genEquipServicesNGPWProfilesEntry 6 }
genEquipServicesNGPWProfilesCasAlarmPattern OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CAS alarm pattern transmitted on E1 interface when packets over/underflow the jitter buffer."
::= { genEquipServicesNGPWProfilesEntry 7 }
genEquipServicesNGPWProfilesRtpHeaderUsed OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If set to False: an RTP header is not pre-pended to the TDM packet."
::= { genEquipServicesNGPWProfilesEntry 8 }
genEquipServicesNGPWProfilesRtpTimestampMode OBJECT-TYPE
SYNTAX PWRtpTimeStampMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RTP timestamp mode."
::= { genEquipServicesNGPWProfilesEntry 9 }
genEquipServicesNGPWProfilesRtpTimestampAbsFactor OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Multiplication factor for 8KHz units in absolute mode of RTP timestamping."
::= { genEquipServicesNGPWProfilesEntry 10 }
genEquipServicesNGPWProfilesLopsDetection OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Timeout for TDM ports loopback."
::= { genEquipServicesNGPWProfilesEntry 11 }
genEquipServicesNGPWProfilesConseqPacketsInSync OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of consecutive packets with sequential sequence numbers required to exit LOPS."
::= { genEquipServicesNGPWProfilesEntry 12 }
genEquipServicesNGPWProfilesConseqMissPktsOutSync OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of consecutive missing packets required to enter LOPS."
::= { genEquipServicesNGPWProfilesEntry 13 }
genEquipServicesNGPWProfilesPktLossTimeWindow OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time for computing average packet loss rate to detect excessive packet loss."
::= { genEquipServicesNGPWProfilesEntry 14 }
genEquipServicesNGPWProfilesExcessivePktLossThresh OBJECT-TYPE
SYNTAX INTEGER (1..500)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Alarm threshold (in percent) for excessive packet loss."
::= { genEquipServicesNGPWProfilesEntry 15 }
genEquipServicesNGPWProfilesAlarmThresh OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay (in msecs) for persistent alarm setting."
::= { genEquipServicesNGPWProfilesEntry 16 }
genEquipServicesNGPWProfilesClearAlarmThresh OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Delay (in msecs) for persistent alarm clearing."
::= { genEquipServicesNGPWProfilesEntry 17 }
genEquipServicesNGPWProfilesMissingPktsToSes OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TPercent of missing packets detected in 1 second window to cause SES to be counted."
::= { genEquipServicesNGPWProfilesEntry 18 }
genEquipServicesNGPWProfilesRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWProfilesEntry 30 }
--
-- PSN tunnel configuration table - pw-psn-tunnel-configuration-table
--
genEquipServicesNGPWPSNTunnelsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of PSN tunnel encapsulations for PW services."
::= { genEquipServicesNGPW 4 }
genEquipServicesNGPWPSNTunnelsEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWPSNTunnelsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of PSN tunnel encapsulations for PW services."
INDEX { genEquipServicesNGPWPSNTunnelsSlotID, genEquipServicesNGPWPSNTunnelsTunnelId }
::= { genEquipServicesNGPWPSNTunnelsTable 1 }
GenEquipServicesNGPWPSNTunnelsEntry ::=
SEQUENCE {
genEquipServicesNGPWPSNTunnelsSlotID
INTEGER,
genEquipServicesNGPWPSNTunnelsTunnelId
INTEGER,
genEquipServicesNGPWPSNTunnelsAdmin
EnableDisableSMI2,
genEquipServicesNGPWPSNTunnelsPsnType
PWTunnelPsnType,
genEquipServicesNGPWPSNTunnelsDestIpAddr
IpAddress,
genEquipServicesNGPWPSNTunnelsNextHopIp
IpAddress,
genEquipServicesNGPWPSNTunnelsTosDscp
INTEGER,
genEquipServicesNGPWPSNTunnelsRemoteMacAddr
OCTET STRING,
genEquipServicesNGPWPSNTunnelsSourceMPLSLabel
INTEGER,
genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel
INTEGER,
genEquipServicesNGPWPSNTunnelsMPLSexp
INTEGER,
genEquipServicesNGPWPSNTunnelsVlanType
PWTunnelVlanType,
genEquipServicesNGPWPSNTunnelsVid
INTEGER,
genEquipServicesNGPWPSNTunnelsPBits
INTEGER,
genEquipServicesNGPWPSNTunnelsMaId
INTEGER,
genEquipServicesNGPWPSNTunnelsTDMDefectPropagation
EnableDisableSMI2,
genEquipServicesNGPWPSNTunnelsRowStatus
RowStatus
}
genEquipServicesNGPWPSNTunnelsSlotID OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWPSNTunnelsEntry 1 }
genEquipServicesNGPWPSNTunnelsTunnelId OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN Tunnel ID."
::= { genEquipServicesNGPWPSNTunnelsEntry 2 }
genEquipServicesNGPWPSNTunnelsAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Payload type byte."
::= { genEquipServicesNGPWPSNTunnelsEntry 3 }
genEquipServicesNGPWPSNTunnelsPsnType OBJECT-TYPE
SYNTAX PWTunnelPsnType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel type. UDPIP denotes UDP/IP, while eth denotes MEF8 encapsulation."
::= { genEquipServicesNGPWPSNTunnelsEntry 4 }
genEquipServicesNGPWPSNTunnelsDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP."
::= { genEquipServicesNGPWPSNTunnelsEntry 5 }
genEquipServicesNGPWPSNTunnelsNextHopIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Next hop IP Address for UDP/IP PSN tunnel."
::= { genEquipServicesNGPWPSNTunnelsEntry 6 }
genEquipServicesNGPWPSNTunnelsTosDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel ToS (DSCP)."
::= { genEquipServicesNGPWPSNTunnelsEntry 7 }
genEquipServicesNGPWPSNTunnelsRemoteMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote MAC address."
::= { genEquipServicesNGPWPSNTunnelsEntry 8 }
genEquipServicesNGPWPSNTunnelsSourceMPLSLabel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source MPLS Label."
::= { genEquipServicesNGPWPSNTunnelsEntry 9 }
genEquipServicesNGPWPSNTunnelsDestinationMPLSLabel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination MPLS label."
::= { genEquipServicesNGPWPSNTunnelsEntry 10 }
genEquipServicesNGPWPSNTunnelsMPLSexp OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MPLS Experimental field."
::= { genEquipServicesNGPWPSNTunnelsEntry 11 }
genEquipServicesNGPWPSNTunnelsVlanType OBJECT-TYPE
SYNTAX PWTunnelVlanType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN type supported by this PSN tunnel (S-VLAN or C-VLAN)."
::= { genEquipServicesNGPWPSNTunnelsEntry 12 }
genEquipServicesNGPWPSNTunnelsVid OBJECT-TYPE
SYNTAX INTEGER (0..4090)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel VLAN ID."
::= { genEquipServicesNGPWPSNTunnelsEntry 13 }
genEquipServicesNGPWPSNTunnelsPBits OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel P-bits."
::= { genEquipServicesNGPWPSNTunnelsEntry 14 }
genEquipServicesNGPWPSNTunnelsMaId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association ID."
::= { genEquipServicesNGPWPSNTunnelsEntry 15 }
genEquipServicesNGPWPSNTunnelsTDMDefectPropagation OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM defect propagation to SOAM. Enable for dual homing configuration."
::= { genEquipServicesNGPWPSNTunnelsEntry 16 }
genEquipServicesNGPWPSNTunnelsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWPSNTunnelsEntry 30 }
--
-- PW service configuration table - pw-service-configuration-table
--
genEquipServicesNGPWServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows definition of PW services."
::= { genEquipServicesNGPW 5 }
genEquipServicesNGPWServiceEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows definition of PW services."
INDEX { genEquipServicesNGPWServiceSlotID, genEquipServicesNGPWServicePWId }
::= { genEquipServicesNGPWServiceTable 1 }
GenEquipServicesNGPWServiceEntry ::=
SEQUENCE {
genEquipServicesNGPWServiceSlotID
INTEGER,
genEquipServicesNGPWServicePWId
INTEGER,
genEquipServicesNGPWServiceAdmin
EnableDisableSMI2,
genEquipServicesNGPWServicePWType
INTEGER,
genEquipServicesNGPWServicePsnType
PWTunnelPsnType,
genEquipServicesNGPWServiceDs0bundle
INTEGER,
genEquipServicesNGPWServiceTdmProfileId
INTEGER,
genEquipServicesNGPWServiceTunnel
INTEGER,
genEquipServicesNGPWServiceCrReference
NoYes,
genEquipServicesNGPWServiceSrcPsnId
INTEGER,
genEquipServicesNGPWServiceDstPsnId
INTEGER,
genEquipServicesNGPWServicePsnTunnelProtection
INTEGER,
genEquipServicesNGPWServiceRowStatus
RowStatus
}
genEquipServicesNGPWServiceSlotID OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWServiceEntry 1 }
genEquipServicesNGPWServicePWId OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pseudowire ID."
::= { genEquipServicesNGPWServiceEntry 2 }
genEquipServicesNGPWServiceAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administrative status of this PW service."
::= { genEquipServicesNGPWServiceEntry 3 }
genEquipServicesNGPWServicePWType OBJECT-TYPE
SYNTAX INTEGER {
satop(0),
cespsn(1),
cas-cespsn(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the emulated service to be carried over the PW service (SAToP, CESoP, CESoP with PSN)."
::= { genEquipServicesNGPWServiceEntry 4 }
genEquipServicesNGPWServicePsnType OBJECT-TYPE
SYNTAX PWTunnelPsnType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the PSN type that the PW service will use over the network."
::= { genEquipServicesNGPWServiceEntry 5 }
genEquipServicesNGPWServiceDs0bundle OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number DS0 bundle (for CESoPSN). This parameter must be zero for SAToP."
::= { genEquipServicesNGPWServiceEntry 6 }
genEquipServicesNGPWServiceTdmProfileId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the PW profile id for this PW service."
::= { genEquipServicesNGPWServiceEntry 7 }
genEquipServicesNGPWServiceTunnel OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN tunnel ID for unprotected or PSN tunnel group ID for protected PSN channel."
::= { genEquipServicesNGPWServiceEntry 8 }
genEquipServicesNGPWServiceCrReference OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Whether this PW may be used as a reference for clock recovery."
::= { genEquipServicesNGPWServiceEntry 9 }
genEquipServicesNGPWServiceSrcPsnId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel."
::= { genEquipServicesNGPWServiceEntry 10 }
genEquipServicesNGPWServiceDstPsnId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination UDP Port for UDP IP tunnel, ECID for Ethernet tunnel or label for MPLS tunnel."
::= { genEquipServicesNGPWServiceEntry 11 }
genEquipServicesNGPWServicePsnTunnelProtection OBJECT-TYPE
SYNTAX INTEGER {
no(0)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether this PW service is PSN protected."
::= { genEquipServicesNGPWServiceEntry 12 }
genEquipServicesNGPWServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWServiceEntry 30 }
--
-- TDM port configuration table - pw-tdm-port-configuration-table
--
genEquipServicesNGPWTDMPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWTDMPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of TDM ports."
::= { genEquipServicesNGPW 6 }
genEquipServicesNGPWTDMPortsEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWTDMPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of TDM ports."
INDEX { genEquipServicesNGPWTDMPortsSlotID, genEquipServicesNGPWTDMPortsPort }
::= { genEquipServicesNGPWTDMPortsTable 1 }
GenEquipServicesNGPWTDMPortsEntry ::=
SEQUENCE {
genEquipServicesNGPWTDMPortsSlotID
INTEGER,
genEquipServicesNGPWTDMPortsPort
INTEGER,
genEquipServicesNGPWTDMPortsIfIndex
INTEGER,
genEquipServicesNGPWTDMPortsAdmin
EnableDisableSMI2,
genEquipServicesNGPWTDMPortsLineType
INTEGER,
genEquipServicesNGPWTDMPortsLineCoding
INTEGER,
genEquipServicesNGPWTDMPortsChannelization
EnableDisableSMI2,
genEquipServicesNGPWTDMPortsTimingMode
INTEGER,
genEquipServicesNGPWTDMPortsClockSourceRef
INTEGER,
genEquipServicesNGPWTDMPortsClkSrcRefPort
INTEGER,
genEquipServicesNGPWTDMPortsIdleCode
INTEGER,
genEquipServicesNGPWTDMPortsCableLength
INTEGER,
genEquipServicesNGPWTDMPortsLoopback
TDMLoopbackType
}
genEquipServicesNGPWTDMPortsSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWTDMPortsEntry 1 }
genEquipServicesNGPWTDMPortsPort OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical port number in the card."
::= { genEquipServicesNGPWTDMPortsEntry 2 }
genEquipServicesNGPWTDMPortsIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ifIndex."
::= { genEquipServicesNGPWTDMPortsEntry 3 }
genEquipServicesNGPWTDMPortsAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port administrative state."
::= { genEquipServicesNGPWTDMPortsEntry 4 }
genEquipServicesNGPWTDMPortsLineType OBJECT-TYPE
SYNTAX INTEGER {
e1Unframed(0),
e1(1),
e1-crc(2),
e1-mf(3),
e1-mf-crc(4),
ds1-d4(5),
ds1-esf(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Line type of this TDM port."
::= { genEquipServicesNGPWTDMPortsEntry 5 }
genEquipServicesNGPWTDMPortsLineCoding OBJECT-TYPE
SYNTAX INTEGER {
hdb3-b8zs(0),
ami(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1. AMI is only for T1."
::= { genEquipServicesNGPWTDMPortsEntry 6 }
genEquipServicesNGPWTDMPortsChannelization OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication whether this TDM port is channelized into DS0s."
::= { genEquipServicesNGPWTDMPortsEntry 7 }
genEquipServicesNGPWTDMPortsTimingMode OBJECT-TYPE
SYNTAX INTEGER {
loop(0),
absolute(1),
clock-recovery(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock reference for the outgoing TDM signal."
::= { genEquipServicesNGPWTDMPortsEntry 8 }
genEquipServicesNGPWTDMPortsClockSourceRef OBJECT-TYPE
SYNTAX INTEGER {
none(0),
front-panel(1),
sys-ref(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock source reference for Absolute clock mode. ???none??? - for loop or clock-recovery timing modes."
::= { genEquipServicesNGPWTDMPortsEntry 9 }
genEquipServicesNGPWTDMPortsClkSrcRefPort OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port serving as a clock reference for loop or clock-recovery timing modes."
::= { genEquipServicesNGPWTDMPortsEntry 10 }
genEquipServicesNGPWTDMPortsIdleCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value to be transmitted on this TDM port in unused timeslots."
::= { genEquipServicesNGPWTDMPortsEntry 11 }
genEquipServicesNGPWTDMPortsCableLength OBJECT-TYPE
SYNTAX INTEGER {
fixed-or-0-133ft(0),
len-133-266ft(1),
len-266-399ft(2),
len-399-533ft(3),
len-533-655ft(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Cable length for this port. The value fixed-or-0-133ft means fixed for E1 (the only valid value) and 0-133ft for T1."
::= { genEquipServicesNGPWTDMPortsEntry 12 }
genEquipServicesNGPWTDMPortsLoopback OBJECT-TYPE
SYNTAX TDMLoopbackType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of required loopback on this TDM port."
::= { genEquipServicesNGPWTDMPortsEntry 13 }
--
-- PSN tunnel status table - pw-psn-tunnel-status-table
--
genEquipServicesNGPWPSNTunnelsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains status and information about existing PSN tunnels."
::= { genEquipServicesNGPW 7 }
genEquipServicesNGPWPSNTunnelsStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWPSNTunnelsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry contains status and information about existing PSN tunnels."
INDEX { genEquipServicesNGPWPSNTunnelsStatusSlotID, genEquipServicesNGPWPSNTunnelsStatusTunnelId }
::= { genEquipServicesNGPWPSNTunnelsStatusTable 1 }
GenEquipServicesNGPWPSNTunnelsStatusEntry ::=
SEQUENCE {
genEquipServicesNGPWPSNTunnelsStatusSlotID
INTEGER,
genEquipServicesNGPWPSNTunnelsStatusTunnelId
INTEGER,
genEquipServicesNGPWPSNTunnelsStatusOperStatus
DownUp,
genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr
IpAddress,
genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr
OCTET STRING,
genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr
OCTET STRING
}
genEquipServicesNGPWPSNTunnelsStatusSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 1 }
genEquipServicesNGPWPSNTunnelsStatusTunnelId OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN Tunnel ID."
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 2 }
genEquipServicesNGPWPSNTunnelsStatusOperStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN tunnel operational state."
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 3 }
genEquipServicesNGPWPSNTunnelsStatusSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN tunnel source IP address."
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 4 }
genEquipServicesNGPWPSNTunnelsStatusSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN tunnel source MAC address."
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 5 }
genEquipServicesNGPWPSNTunnelsStatusRemoteMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN tunnel remote MAC address."
::= { genEquipServicesNGPWPSNTunnelsStatusEntry 6 }
--
-- PW service status table - pw-service-status-table
--
genEquipServicesNGPWServiceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWServiceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains status information of existing PW services."
::= { genEquipServicesNGPW 8 }
genEquipServicesNGPWServiceStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWServiceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry contains status information of existing PW services."
INDEX { genEquipServicesNGPWServiceStatusSlotID, genEquipServicesNGPWServiceStatusID }
::= { genEquipServicesNGPWServiceStatusTable 1 }
GenEquipServicesNGPWServiceStatusEntry ::=
SEQUENCE {
genEquipServicesNGPWServiceStatusSlotID
INTEGER,
genEquipServicesNGPWServiceStatusID
INTEGER,
genEquipServicesNGPWServiceStatusOperStatus
DownUp,
genEquipServicesNGPWServiceStatusClearStats
NoYes,
genEquipServicesNGPWServiceStatusTxPkts
Counter64,
genEquipServicesNGPWServiceStatusReceivedPkts
Counter64,
genEquipServicesNGPWServiceStatusTransitionsLOPS
Counter64,
genEquipServicesNGPWServiceStatusJitterBufferOverruns
Counter64,
genEquipServicesNGPWServiceStatusBufferDeviations
Counter64,
genEquipServicesNGPWServiceStatusMinJitterCount
Counter64,
genEquipServicesNGPWServiceStatusMaxJitterCount
Counter64
}
genEquipServicesNGPWServiceStatusSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWServiceStatusEntry 1 }
genEquipServicesNGPWServiceStatusID OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pseudowire ID."
::= { genEquipServicesNGPWServiceStatusEntry 2 }
genEquipServicesNGPWServiceStatusOperStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the operational status of PW service."
::= { genEquipServicesNGPWServiceStatusEntry 3 }
genEquipServicesNGPWServiceStatusClearStats OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear all statistics for this PW service."
::= { genEquipServicesNGPWServiceStatusEntry 4 }
genEquipServicesNGPWServiceStatusTxPkts OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transmitted packets."
::= { genEquipServicesNGPWServiceStatusEntry 5 }
genEquipServicesNGPWServiceStatusReceivedPkts OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of received packets."
::= { genEquipServicesNGPWServiceStatusEntry 6 }
genEquipServicesNGPWServiceStatusTransitionsLOPS OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of transitions from the normal state to the LOPS."
::= { genEquipServicesNGPWServiceStatusEntry 7 }
genEquipServicesNGPWServiceStatusJitterBufferOverruns OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of jitter buffer overruns."
::= { genEquipServicesNGPWServiceStatusEntry 8 }
genEquipServicesNGPWServiceStatusBufferDeviations OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Max Jitter Buffer Deviation."
::= { genEquipServicesNGPWServiceStatusEntry 9 }
genEquipServicesNGPWServiceStatusMinJitterCount OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimum jitter buffer usage registered for the last second."
::= { genEquipServicesNGPWServiceStatusEntry 10 }
genEquipServicesNGPWServiceStatusMaxJitterCount OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum jitter buffer usage registered for the last second."
::= { genEquipServicesNGPWServiceStatusEntry 11 }
--
-- PW TDM port status table - pw-tdm-port-status-table and pw-tdm-port-loopback-status-table
--
genEquipServicesNGPWTDMPortsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWTDMPortsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains status information about TDM ports."
::= { genEquipServicesNGPW 9 }
genEquipServicesNGPWTDMPortsStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWTDMPortsStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry contains status information about TDM ports."
INDEX { genEquipServicesNGPWTDMPortsStatusIfIndex }
::= { genEquipServicesNGPWTDMPortsStatusTable 1 }
GenEquipServicesNGPWTDMPortsStatusEntry ::=
SEQUENCE {
genEquipServicesNGPWTDMPortsStatusSlotID
INTEGER,
genEquipServicesNGPWTDMPortsStatusPort
INTEGER,
genEquipServicesNGPWTDMPortsStatusIfIndex
INTEGER,
genEquipServicesNGPWTDMPortsStatusOperStatus
DownUp,
genEquipServicesNGPWTDMPortsStatusLoopbackCounter
INTEGER,
genEquipServicesNGPWTDMPortsStatusActualLoopback
INTEGER,
genEquipServicesNGPWTDMPortsStatusLineStatus
INTEGER,
genEquipServicesNGPWTDMPortsStatusLoopback
TDMLoopbackType
}
genEquipServicesNGPWTDMPortsStatusSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWTDMPortsStatusEntry 1 }
genEquipServicesNGPWTDMPortsStatusPort OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical port number in the card."
::= { genEquipServicesNGPWTDMPortsStatusEntry 2 }
genEquipServicesNGPWTDMPortsStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ifIndex."
::= { genEquipServicesNGPWTDMPortsStatusEntry 3 }
genEquipServicesNGPWTDMPortsStatusOperStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Operational state of the port."
::= { genEquipServicesNGPWTDMPortsStatusEntry 4 }
genEquipServicesNGPWTDMPortsStatusLoopbackCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loopback time left (in seconds)"
::= { genEquipServicesNGPWTDMPortsStatusEntry 5 }
genEquipServicesNGPWTDMPortsStatusActualLoopback OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual status of loopback on this TDM port reported by the card."
::= { genEquipServicesNGPWTDMPortsStatusEntry 6 }
genEquipServicesNGPWTDMPortsStatusLineStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Currently present line-level PDH alarms."
::= { genEquipServicesNGPWTDMPortsStatusEntry 7 }
genEquipServicesNGPWTDMPortsStatusLoopback OBJECT-TYPE
SYNTAX TDMLoopbackType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of required loopback on this TDM port."
::= { genEquipServicesNGPWTDMPortsStatusEntry 8 }
--
-- Bundle status table - pw-bundle-status-table
--
genEquipServicesNGPWBundlesStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWBundlesStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the current staus for bundles."
::= { genEquipServicesNGPW 10 }
genEquipServicesNGPWBundlesStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWBundlesStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the current staus for bundles."
INDEX { genEquipServicesNGPWBundlesStatusSlotID, genEquipServicesNGPWBundlesStatusBundleId }
::= { genEquipServicesNGPWBundlesStatusTable 1 }
GenEquipServicesNGPWBundlesStatusEntry ::=
SEQUENCE {
genEquipServicesNGPWBundlesStatusSlotID
INTEGER,
genEquipServicesNGPWBundlesStatusBundleId
INTEGER,
genEquipServicesNGPWBundlesStatusOperStatus
DownUp
}
genEquipServicesNGPWBundlesStatusSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWBundlesStatusEntry 1 }
genEquipServicesNGPWBundlesStatusBundleId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bundle ID."
::= { genEquipServicesNGPWBundlesStatusEntry 2 }
genEquipServicesNGPWBundlesStatusOperStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bundle operational state."
::= { genEquipServicesNGPWBundlesStatusEntry 3 }
--
-- PW Tunnel group configuration table - pw-psn-tunnel-group-configuration-table
--
genEquipServicesNGPWPSNTunnelGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of groups of tunnels for PW path protection."
::= { genEquipServicesNGPW 11 }
genEquipServicesNGPWPSNTunnelGroupEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWPSNTunnelGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of groups of tunnels for PW path protection."
INDEX { genEquipServicesNGPWPSNTunnelGroupSlot,
genEquipServicesNGPWPSNTunnelGroupId }
::= { genEquipServicesNGPWPSNTunnelGroupTable 1 }
GenEquipServicesNGPWPSNTunnelGroupEntry ::=
SEQUENCE {
genEquipServicesNGPWPSNTunnelGroupSlot
INTEGER,
genEquipServicesNGPWPSNTunnelGroupId
INTEGER,
genEquipServicesNGPWPSNTunnelGroupPrimaryId
INTEGER,
genEquipServicesNGPWPSNTunnelGroupSecondaryId
INTEGER,
genEquipServicesNGPWPSNTunnelGroupAdmin
EnableDisableSMI2,
genEquipServicesNGPWPSNTunnelGroupRevertive
EnableDisableSMI2,
genEquipServicesNGPWPSNTunnelGroupProtectionMode
EnableDisableSMI2,
genEquipServicesNGPWPSNTunnelGroupRowStatus
RowStatus
}
genEquipServicesNGPWPSNTunnelGroupSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 1 }
genEquipServicesNGPWPSNTunnelGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the corresponding PSN Tunnel Protection Group."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 2 }
genEquipServicesNGPWPSNTunnelGroupPrimaryId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Tunnel ID for the primary path."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 3 }
genEquipServicesNGPWPSNTunnelGroupSecondaryId OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Tunnel ID for the secondary path."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 4 }
genEquipServicesNGPWPSNTunnelGroupAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Admin."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 5 }
genEquipServicesNGPWPSNTunnelGroupRevertive OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable for revertive protection. Default is disabled."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 6 }
genEquipServicesNGPWPSNTunnelGroupProtectionMode OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Protection mode 1+1."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 7 }
genEquipServicesNGPWPSNTunnelGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesNGPWPSNTunnelGroupEntry 30 }
--
-- PW Tunnel group status table - pw-psn-tunnel-group-status-table
--
genEquipServicesNGPWPSNTunnelGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWPSNTunnelGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains status of path protection tunnels."
::= { genEquipServicesNGPW 12 }
genEquipServicesNGPWPSNTunnelGroupStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWPSNTunnelGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry contains status of path protection tunnels."
INDEX { genEquipServicesNGPWPSNTunnelGroupStatusSlot,
genEquipServicesNGPWPSNTunnelGroupStatusId }
::= { genEquipServicesNGPWPSNTunnelGroupStatusTable 1 }
GenEquipServicesNGPWPSNTunnelGroupStatusEntry ::=
SEQUENCE {
genEquipServicesNGPWPSNTunnelGroupStatusSlot
INTEGER,
genEquipServicesNGPWPSNTunnelGroupStatusId
INTEGER,
genEquipServicesNGPWPSNTunnelGroupStatusOperStatus
DownUp,
genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand
TunnelGroupProtectionCmd,
genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches
INTEGER,
genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel
INTEGER,
genEquipServicesNGPWPSNTunnelGroupStatusClearStats
OffOn,
genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown
INTEGER
}
genEquipServicesNGPWPSNTunnelGroupStatusSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 1 }
genEquipServicesNGPWPSNTunnelGroupStatusId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tunnel group ID."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 2 }
genEquipServicesNGPWPSNTunnelGroupStatusOperStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tunnel group operational state."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 3 }
genEquipServicesNGPWPSNTunnelGroupStatusProtectionCommand OBJECT-TYPE
SYNTAX TunnelGroupProtectionCmd
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User command to perform a path protection switch."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 4 }
genEquipServicesNGPWPSNTunnelGroupStatusProtectionSwitches OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A counter of PSN tunnel protection switches."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 5 }
genEquipServicesNGPWPSNTunnelGroupStatusActiveTunnel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active PSN tunnel."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 6 }
genEquipServicesNGPWPSNTunnelGroupStatusClearStats OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User command to clear number of switches counter."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 7 }
genEquipServicesNGPWPSNTunnelGroupStatusRevertiveCountdown OBJECT-TYPE
SYNTAX OffOn
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time left until revertive switch is performed."
::= { genEquipServicesNGPWPSNTunnelGroupStatusEntry 8 }
--
-- PW Maintenance Domain configuration table - pw-soam-md-configuration-table
--
genEquipServicesNGPWSOAMMDTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of MD parameters at the PW card."
::= { genEquipServicesNGPW 13 }
genEquipServicesNGPWSOAMMDEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWSOAMMDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of MD parameters at the PW card."
INDEX { genEquipServicesNGPWSOAMMDSlot,
genEquipServicesNGPWSOAMMDId }
::= { genEquipServicesNGPWSOAMMDTable 1 }
GenEquipServicesNGPWSOAMMDEntry ::=
SEQUENCE {
genEquipServicesNGPWSOAMMDSlot
INTEGER,
genEquipServicesNGPWSOAMMDId
INTEGER,
genEquipServicesNGPWSOAMMDName
DisplayString,
genEquipServicesNGPWSOAMMDLevel
INTEGER,
genEquipServicesNGPWSOAMMDRowStatus
RowStatus
}
genEquipServicesNGPWSOAMMDSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipServicesNGPWSOAMMDEntry 1 }
genEquipServicesNGPWSOAMMDId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maintenance Domain ID."
::= { genEquipServicesNGPWSOAMMDEntry 2 }
genEquipServicesNGPWSOAMMDName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Domain Name."
::= { genEquipServicesNGPWSOAMMDEntry 3 }
genEquipServicesNGPWSOAMMDLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Domain level."
::= { genEquipServicesNGPWSOAMMDEntry 4 }
genEquipServicesNGPWSOAMMDRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWSOAMMDEntry 30 }
--
-- PW Maintenance Association configuration table - pw-soam-ma-configuration-table
--
genEquipServicesNGPWSOAMMATable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMAEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of MA parameters at the PW card."
::= { genEquipServicesNGPW 14 }
genEquipServicesNGPWSOAMMAEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWSOAMMAEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of MA parameters at the PW card."
INDEX { genEquipServicesNGPWSOAMMASlot,
genEquipServicesNGPWSOAMMAId }
::= { genEquipServicesNGPWSOAMMATable 1 }
GenEquipServicesNGPWSOAMMAEntry ::=
SEQUENCE {
genEquipServicesNGPWSOAMMASlot
INTEGER,
genEquipServicesNGPWSOAMMAId
INTEGER,
genEquipServicesNGPWSOAMMAName
DisplayString,
genEquipServicesNGPWSOAMMAMdId
INTEGER,
genEquipServicesNGPWSOAMMALocalMepId
INTEGER,
genEquipServicesNGPWSOAMMARemoteMepId
INTEGER,
genEquipServicesNGPWSOAMMAVid
INTEGER,
genEquipServicesNGPWSOAMMAVlanType
PWTunnelVlanType,
genEquipServicesNGPWSOAMMACCMAdmin
EnableDisableSMI2,
genEquipServicesNGPWSOAMMACCMInterval
PWSOAMccmInterval,
genEquipServicesNGPWSOAMMACCMLTMPriority
INTEGER,
genEquipServicesNGPWSOAMMARowStatus
RowStatus
}
genEquipServicesNGPWSOAMMASlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot ID."
::= { genEquipServicesNGPWSOAMMAEntry 1 }
genEquipServicesNGPWSOAMMAId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maintenance association ID."
::= { genEquipServicesNGPWSOAMMAEntry 2 }
genEquipServicesNGPWSOAMMAName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association name."
::= { genEquipServicesNGPWSOAMMAEntry 3 }
genEquipServicesNGPWSOAMMAMdId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Domain ID."
::= { genEquipServicesNGPWSOAMMAEntry 4 }
genEquipServicesNGPWSOAMMALocalMepId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Local MEP ID."
::= { genEquipServicesNGPWSOAMMAEntry 5 }
genEquipServicesNGPWSOAMMARemoteMepId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remote MEP ID."
::= { genEquipServicesNGPWSOAMMAEntry 6 }
genEquipServicesNGPWSOAMMAVid OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN ID of the Maintenance Association."
::= { genEquipServicesNGPWSOAMMAEntry 7 }
genEquipServicesNGPWSOAMMAVlanType OBJECT-TYPE
SYNTAX PWTunnelVlanType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN type of the Maintenance Association."
::= { genEquipServicesNGPWSOAMMAEntry 8 }
genEquipServicesNGPWSOAMMACCMAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association CCM administrative status."
::= { genEquipServicesNGPWSOAMMAEntry 9 }
genEquipServicesNGPWSOAMMACCMInterval OBJECT-TYPE
SYNTAX PWSOAMccmInterval
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association CCM Interval."
::= { genEquipServicesNGPWSOAMMAEntry 10 }
genEquipServicesNGPWSOAMMACCMLTMPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association link trace message priority."
::= { genEquipServicesNGPWSOAMMAEntry 11 }
genEquipServicesNGPWSOAMMARowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipServicesNGPWSOAMMAEntry 30 }
--
-- PW Maintenance Association status table - pw-soam-ma-status-table
--
genEquipServicesNGPWSOAMMAStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesNGPWSOAMMAStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table shows the SOAM status of each MA at the PW card level."
::= { genEquipServicesNGPW 15 }
genEquipServicesNGPWSOAMMAStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesNGPWSOAMMAStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry shows the SOAM status of each MA at the PW card level."
INDEX { genEquipServicesNGPWSOAMMAStatusSlot,
genEquipServicesNGPWSOAMMAStatusId }
::= { genEquipServicesNGPWSOAMMAStatusTable 1 }
GenEquipServicesNGPWSOAMMAStatusEntry ::=
SEQUENCE {
genEquipServicesNGPWSOAMMAStatusSlot
INTEGER,
genEquipServicesNGPWSOAMMAStatusId
INTEGER,
genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr
MacAddress,
genEquipServicesNGPWSOAMMAStatusDefects
INTEGER
}
genEquipServicesNGPWSOAMMAStatusSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot ID."
::= { genEquipServicesNGPWSOAMMAStatusEntry 1 }
genEquipServicesNGPWSOAMMAStatusId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maintenance association ID."
::= { genEquipServicesNGPWSOAMMAStatusEntry 2 }
genEquipServicesNGPWSOAMMAStatusRemoteMepMACAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote MEP MAC Address."
::= { genEquipServicesNGPWSOAMMAStatusEntry 3 }
genEquipServicesNGPWSOAMMAStatusDefects OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8), Cross-connection CCM (16), AIS (32)."
::= { genEquipServicesNGPWSOAMMAStatusEntry 4 }
--
-- Service TDM Scalars.
--
genEquipServicesNGPWTDM OBJECT IDENTIFIER ::= {genEquipServicesNGPW 20}
genEquipServicesNGPWTDMRevertiveTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WTR (Wait To Restore) timer for revertive switches."
::= { genEquipServicesNGPWTDM 1 }
genEquipServicesNGPWRangeVC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM services VC range."
::= { genEquipServicesNGPWTDM 2 }
genEquipServicesNGPWOffsetVC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM services VC offset."
::= { genEquipServicesNGPWTDM 3 }
genEquipServicesNGPWLatencyOptimizationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/Disables the option of choosing a latency-optimized mode for TDM services."
::= { genEquipServicesNGPWTDM 4 }
--
-- PSN tunnel groups table, (addition for PWC Phase-2)
--
genEquipServicesPWPSNTunnelGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of PSN protection groups for pseudowire service path protection."
::= { genEquipServicesPW 10 }
genEquipServicesPWPSNTunnelGroupsEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWPSNTunnelGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry table allows configuration of PSN protection groups for pseudowire service path protection."
INDEX { genEquipServicesPWPSNTunnelGroupsTunnelGroupID }
::= { genEquipServicesPWPSNTunnelGroupsTable 1 }
GenEquipServicesPWPSNTunnelGroupsEntry ::=
SEQUENCE {
genEquipServicesPWPSNTunnelGroupsTunnelGroupID
INTEGER,
genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary
INTEGER,
genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary
INTEGER,
genEquipServicesPWPSNTunnelGroupsSwitchToStandby
OffOn,
genEquipServicesPWPSNTunnelGroupsRowStatus
RowStatus
}
genEquipServicesPWPSNTunnelGroupsTunnelGroupID OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PSN Tunnel Group ID."
::= { genEquipServicesPWPSNTunnelGroupsEntry 1 }
genEquipServicesPWPSNTunnelGroupsTunnelIDPrimary OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Primary PSN tunnel ID."
::= { genEquipServicesPWPSNTunnelGroupsEntry 2 }
genEquipServicesPWPSNTunnelGroupsTunnelIDSecondary OBJECT-TYPE
SYNTAX INTEGER (1..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Secondary PSN tunnel ID."
::= { genEquipServicesPWPSNTunnelGroupsEntry 3 }
genEquipServicesPWPSNTunnelGroupsSwitchToStandby OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force a switch from primary to secondary tunnel."
::= { genEquipServicesPWPSNTunnelGroupsEntry 4 }
genEquipServicesPWPSNTunnelGroupsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWPSNTunnelGroupsEntry 30 }
-- PSN tunnel groups status table, (addition for PWC Phase-2)
genEquipServicesPWPSNTunnelGroupStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWPSNTunnelGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows monitoring of PSN protection groups status."
::= { genEquipServicesPW 11 }
genEquipServicesPWPSNTunnelGroupStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWPSNTunnelGroupStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows monitoring of PSN protection groups status."
INDEX { genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID }
::= { genEquipServicesPWPSNTunnelGroupStatusTable 1 }
GenEquipServicesPWPSNTunnelGroupStatusEntry ::=
SEQUENCE {
genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID
INTEGER,
genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel
INTEGER,
genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches
INTEGER
}
genEquipServicesPWPSNTunnelGroupStatusTunnelGroupID OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PSN Tunnel Group ID."
::= { genEquipServicesPWPSNTunnelGroupStatusEntry 1 }
genEquipServicesPWPSNTunnelGroupStatusCurrActiveTunnel OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
secondary(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Currently active PSN tunnel."
::= { genEquipServicesPWPSNTunnelGroupStatusEntry 2 }
genEquipServicesPWPSNTunnelGroupStatusNumProtSwitches OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Counter of PSN tunnel protection switches."
::= { genEquipServicesPWPSNTunnelGroupStatusEntry 3 }
-- SOAM MD definitions table, (addition for PWC Phase-2)
genEquipServicesPWSOAMMDTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWSOAMMDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection."
::= { genEquipServicesPW 12 }
genEquipServicesPWSOAMMDEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWSOAMMDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of Ethernet OAM Maintenance Domains for service monitoring and path protection."
INDEX { genEquipServicesPWSOAMMDDomainID }
::= { genEquipServicesPWSOAMMDTable 1 }
GenEquipServicesPWSOAMMDEntry ::=
SEQUENCE {
genEquipServicesPWSOAMMDDomainID
INTEGER,
genEquipServicesPWSOAMMDDomainName
DisplayString,
genEquipServicesPWSOAMMDDomainLevel
INTEGER,
genEquipServicesPWSOAMMDRowStatus
RowStatus
}
genEquipServicesPWSOAMMDDomainID OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Domain ID."
::= { genEquipServicesPWSOAMMDEntry 1 }
genEquipServicesPWSOAMMDDomainName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Domain Name."
::= { genEquipServicesPWSOAMMDEntry 2 }
genEquipServicesPWSOAMMDDomainLevel OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Domain Level."
::= { genEquipServicesPWSOAMMDEntry 3 }
genEquipServicesPWSOAMMDRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWSOAMMDEntry 30 }
-- SOAM MA definitions table, (addition for PWC Phase-2)
genEquipServicesPWSOAMMATable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesPWSOAMMAEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection."
::= { genEquipServicesPW 13 }
genEquipServicesPWSOAMMAEntry OBJECT-TYPE
SYNTAX GenEquipServicesPWSOAMMAEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of Ethernet OAM Maintenance Association for service monitoring and path protection."
INDEX { genEquipServicesPWSOAMMALocalID }
::= { genEquipServicesPWSOAMMATable 1 }
GenEquipServicesPWSOAMMAEntry ::=
SEQUENCE {
genEquipServicesPWSOAMMALocalID
INTEGER,
genEquipServicesPWSOAMMALocalName
DisplayString,
genEquipServicesPWSOAMMADomainID
INTEGER,
genEquipServicesPWSOAMMAAdmin
EnableDisable,
genEquipServicesPWSOAMMALocalMEP
INTEGER,
genEquipServicesPWSOAMMARemoteMEP
INTEGER,
genEquipServicesPWSOAMMAVlanType
INTEGER,
genEquipServicesPWSOAMMAVlanID
INTEGER,
genEquipServicesPWSOAMMACCMInterval
INTEGER,
genEquipServicesPWSOAMMACCMAdmin
EnableDisable,
genEquipServicesPWSOAMMACCMPriority
INTEGER,
genEquipServicesPWSOAMMARemoteMEPAddr
OCTET STRING,
genEquipServicesPWSOAMMADefects
INTEGER,
genEquipServicesPWSOAMMARowStatus
RowStatus
}
genEquipServicesPWSOAMMALocalID OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association local ID."
::= { genEquipServicesPWSOAMMAEntry 1 }
genEquipServicesPWSOAMMALocalName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association local Name."
::= { genEquipServicesPWSOAMMAEntry 2 }
genEquipServicesPWSOAMMADomainID OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association domain ID."
::= { genEquipServicesPWSOAMMAEntry 3 }
genEquipServicesPWSOAMMAAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association Admin."
::= { genEquipServicesPWSOAMMAEntry 4 }
genEquipServicesPWSOAMMALocalMEP OBJECT-TYPE
SYNTAX INTEGER (1..8191)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association local MEP ID."
::= { genEquipServicesPWSOAMMAEntry 5 }
genEquipServicesPWSOAMMARemoteMEP OBJECT-TYPE
SYNTAX INTEGER (1..8191)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association remote MEP ID."
::= { genEquipServicesPWSOAMMAEntry 6 }
genEquipServicesPWSOAMMAVlanType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
c-type(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN type of the Maintenance Association."
::= { genEquipServicesPWSOAMMAEntry 7 }
genEquipServicesPWSOAMMAVlanID OBJECT-TYPE
SYNTAX INTEGER (0..4090)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Id of the Maintenance Association."
::= { genEquipServicesPWSOAMMAEntry 8 }
genEquipServicesPWSOAMMACCMInterval OBJECT-TYPE
SYNTAX INTEGER {
nInvalid(0),
n3-3-msec(1),
n10-msec(2),
n100-msec(3),
n1s(4),
n10s(5),
n1min(6),
n10min(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CCM Interval."
::= { genEquipServicesPWSOAMMAEntry 9 }
genEquipServicesPWSOAMMACCMAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maintenance Association CCM admin."
::= { genEquipServicesPWSOAMMAEntry 10 }
genEquipServicesPWSOAMMACCMPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CCM Priority."
::= { genEquipServicesPWSOAMMAEntry 11 }
genEquipServicesPWSOAMMARemoteMEPAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC Address of the Maintenance Association Remote MEP."
::= { genEquipServicesPWSOAMMAEntry 12 }
genEquipServicesPWSOAMMADefects OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bitmap field: no-alarm (0), RDI (1), MAC-status (2), remote CCM (4), error CCM (8),
Cross-connection CCM (16), AIS (32)."
::= { genEquipServicesPWSOAMMAEntry 13 }
genEquipServicesPWSOAMMARowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the status of the entry."
::= { genEquipServicesPWSOAMMAEntry 30 }
--
-- The following are the Services part of Switch application tables
--
genEquipServicesCet OBJECT IDENTIFIER ::= {genEquipServices 5}
genEquipServicesCetGeneral OBJECT IDENTIFIER ::= {genEquipServicesCet 1}
genEquipServicesCetSvlanEtherType OBJECT-TYPE
SYNTAX INTEGER {
ether-type-0x88a8(0),
ether-type-0x9100(1),
ether-type-0x9200(2),
ether-type-0x8100(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"S VLAN Ether type."
::= { genEquipServicesCetGeneral 1 }
genEquipServicesCetAgingTimeout OBJECT-TYPE
SYNTAX INTEGER (15..3825)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC forwarding entry aging timeout in seconds."
::= { genEquipServicesCetGeneral 2 }
--
-- Switch Application sw-ap-l3-srv-config-table
--
genEquipServicesCetConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCetConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Services configuration table -
the table describes the connectivity between the interface of the switch."
::= { genEquipServicesCet 2 }
genEquipServicesCetConfigEntry OBJECT-TYPE
SYNTAX GenEquipServicesCetConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Services configuration table entry -
the table describes the connectivity between the interface of the switch."
INDEX { genEquipServicesCetConfigIndex }
::= { genEquipServicesCetConfigTable 1 }
GenEquipServicesCetConfigEntry ::=
SEQUENCE {
genEquipServicesCetConfigIndex
INTEGER,
genEquipServicesCetConfigType
ServiceType,
genEquipServicesCetConfigAdmin
ServiceAdmin,
genEquipServicesCetConfigMacTableSize
INTEGER,
genEquipServicesCetConfigDefaultCos
INTEGER,
genEquipServicesCetConfigCosMode
ServiceCosMode,
genEquipServicesCetConfigEvcId
DisplayString,
genEquipServicesCetConfigEvcDescription
DisplayString,
genEquipServicesCetConfigSplitHorizon
EnableDisable,
genEquipServicesCetConfigResiliencyProtocolInstance
INTEGER,
genEquipServicesCetConfigProtectingTrail
INTEGER,
genEquipServicesCetConfigProtectingTrailIndex
INTEGER,
genEquipServicesCetConfigServiceSubType
ServiceSubType,
genEquipServicesCetConfigTrailIndex
INTEGER,
genEquipServicesCetConfigRowStatus
RowStatus
}
genEquipServicesCetConfigIndex OBJECT-TYPE
SYNTAX INTEGER (1..1025)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipServicesCetConfigEntry 1 }
genEquipServicesCetConfigType OBJECT-TYPE
SYNTAX ServiceType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Service Type (Management, MP, P2P)."
::= { genEquipServicesCetConfigEntry 2 }
genEquipServicesCetConfigAdmin OBJECT-TYPE
SYNTAX ServiceAdmin
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Admin state."
::= { genEquipServicesCetConfigEntry 3 }
genEquipServicesCetConfigMacTableSize OBJECT-TYPE
SYNTAX INTEGER (16..131072)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"MAC Table size of the service,granularity of 16."
::= { genEquipServicesCetConfigEntry 4 }
genEquipServicesCetConfigDefaultCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service default CoS."
::= { genEquipServicesCetConfigEntry 5 }
genEquipServicesCetConfigCosMode OBJECT-TYPE
SYNTAX ServiceCosMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service CoS Color mode."
::= { genEquipServicesCetConfigEntry 6 }
genEquipServicesCetConfigEvcId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Virtual Connection (EVC) ID."
::= { genEquipServicesCetConfigEntry 7 }
genEquipServicesCetConfigEvcDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Virtual Connection (EVC) Description."
::= { genEquipServicesCetConfigEntry 8 }
genEquipServicesCetConfigSplitHorizon OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Split Horizon group Admin."
::= { genEquipServicesCetConfigEntry 9 }
genEquipServicesCetConfigResiliencyProtocolInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resiliency Protocol Instance."
::= { genEquipServicesCetConfigEntry 10 }
genEquipServicesCetConfigProtectingTrail OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Protecting trail."
::= { genEquipServicesCetConfigEntry 11 }
genEquipServicesCetConfigProtectingTrailIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Protecting trail id."
::= { genEquipServicesCetConfigEntry 12 }
genEquipServicesCetConfigServiceSubType OBJECT-TYPE
SYNTAX ServiceSubType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service sub type (Ethernet / TDM / PWE)"
::= { genEquipServicesCetConfigEntry 13 }
genEquipServicesCetConfigTrailIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM Trail ID"
::= { genEquipServicesCetConfigEntry 14 }
genEquipServicesCetConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipServicesCetConfigEntry 30 }
--
-- Switch Application sw-ap-srv-status-multicast
--
genEquipServicesCetStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCetStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Services status table - the table describes the status of the configured services."
::= { genEquipServicesCet 3 }
genEquipServicesCetStatusEntry OBJECT-TYPE
SYNTAX GenEquipServicesCetStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Services status table - the table describes the status of the configured services entry."
INDEX { genEquipServicesCetStatusIndex }
::= { genEquipServicesCetStatusTable 1 }
GenEquipServicesCetStatusEntry ::=
SEQUENCE {
genEquipServicesCetStatusIndex
INTEGER,
genEquipServicesCetStatusMulticast
EnableDisable
}
genEquipServicesCetStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..1025)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipServicesCetStatusEntry 1 }
genEquipServicesCetStatusMulticast OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Configured Multicast Group."
::= { genEquipServicesCetStatusEntry 2 }
--
-- Switch Application sw-ap-l4-srv-sp-config-table
--
genEquipServicesCetSpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCetSpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Service Points (SP) configuration table -
this table describes the ingress and egress attributes (operation) per SPs of each service."
::= { genEquipServicesCet 4 }
genEquipServicesCetSpConfigEntry OBJECT-TYPE
SYNTAX GenEquipServicesCetSpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Service Points (SP) configuration table entry -
this table describes the ingress and egress attributes (operation) per SPs of each service."
INDEX { genEquipServicesCetSpConfigServiceIndex,
genEquipServicesCetSpConfigServicePointIndex }
::= { genEquipServicesCetSpConfigTable 1 }
GenEquipServicesCetSpConfigEntry ::=
SEQUENCE {
genEquipServicesCetSpConfigServiceIndex
INTEGER,
genEquipServicesCetSpConfigServicePointIndex
INTEGER,
genEquipServicesCetSpConfigSpType
SPType,
genEquipServicesCetSpConfigSpSubtype
SPSubType,
genEquipServicesCetSpConfigSpName
DisplayString,
genEquipServicesCetSpConfigIfIndex
INTEGER,
genEquipServicesCetSpConfigSvlanEncap
INTEGER,
genEquipServicesCetSpConfigCvlanEncap
INTEGER,
genEquipServicesCetSpConfigLearning
EnableDisable,
genEquipServicesCetSpConfigFlooding
DisableAllowed,
genEquipServicesCetSpConfigBroadcast
DisableAllowed,
genEquipServicesCetSpConfigCosMode
SPCosMode,
genEquipServicesCetSpConfigDefCos
INTEGER,
genEquipServicesCetSpConfigPclProfileId
INTEGER,
genEquipServicesCetSpConfigPclAdmin
EnableDisable,
genEquipServicesCetSpConfigMonitorCounterGroup
INTEGER,
genEquipServicesCetSpConfigSplitHorizon
SplitHorizonGroup,
genEquipServicesCetSpConfigSvlanEgressPreserve
EnableDisable,
genEquipServicesCetSpConfigSvlanCosPreserve
EnableDisable,
genEquipServicesCetSpConfigCvlanEgressPreserve
EnableDisable,
genEquipServicesCetSpConfigCvlanCosPreserve
EnableDisable,
genEquipServicesCetSpConfigMarkingMode
EnableDisable,
genEquipServicesCetSpConfigServiceClassId
INTEGER,
genEquipServicesCetSpConfigTcamClassification
INTEGER,
genEquipServicesCetSpConfigRowStatus
RowStatus
}
genEquipServicesCetSpConfigServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..1025)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipServicesCetSpConfigEntry 1 }
genEquipServicesCetSpConfigServicePointIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Point ID."
::= { genEquipServicesCetSpConfigEntry 2 }
genEquipServicesCetSpConfigSpType OBJECT-TYPE
SYNTAX SPType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point Type (SAP, SNP, PIPE, MNG)."
::= { genEquipServicesCetSpConfigEntry 3 }
genEquipServicesCetSpConfigSpSubtype OBJECT-TYPE
SYNTAX SPSubType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Service Point Attached Interface Type."
::= { genEquipServicesCetSpConfigEntry 4 }
genEquipServicesCetSpConfigSpName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point Name."
::= { genEquipServicesCetSpConfigEntry 5 }
genEquipServicesCetSpConfigIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index ID."
::= { genEquipServicesCetSpConfigEntry 6 }
genEquipServicesCetSpConfigSvlanEncap OBJECT-TYPE
SYNTAX INTEGER (4096..4097)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"S-Vlan Encapsulation."
::= { genEquipServicesCetSpConfigEntry 7 }
genEquipServicesCetSpConfigCvlanEncap OBJECT-TYPE
SYNTAX INTEGER (0..4097)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C-Vlan Encapsulation."
::= { genEquipServicesCetSpConfigEntry 8 }
genEquipServicesCetSpConfigLearning OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point Learning Admin (disable / enable)."
::= { genEquipServicesCetSpConfigEntry 9 }
genEquipServicesCetSpConfigFlooding OBJECT-TYPE
SYNTAX DisableAllowed
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Ingress aatribute - Allow Flooding of the incoming packet."
::= { genEquipServicesCetSpConfigEntry 10 }
genEquipServicesCetSpConfigBroadcast OBJECT-TYPE
SYNTAX DisableAllowed
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Ingress aatribute - Allow Broadcast of the incoming packet."
::= { genEquipServicesCetSpConfigEntry 11 }
genEquipServicesCetSpConfigCosMode OBJECT-TYPE
SYNTAX SPCosMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point CoS Color mode."
::= { genEquipServicesCetSpConfigEntry 12 }
genEquipServicesCetSpConfigDefCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point Default CoS."
::= { genEquipServicesCetSpConfigEntry 13 }
genEquipServicesCetSpConfigPclProfileId OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"pcl-profile-id."
::= { genEquipServicesCetSpConfigEntry 14 }
genEquipServicesCetSpConfigPclAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PCL Admin."
::= { genEquipServicesCetSpConfigEntry 15 }
genEquipServicesCetSpConfigMonitorCounterGroup OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Ingress attribute - Assign the SP to a specific Monitor Counters Group."
::= { genEquipServicesCetSpConfigEntry 16 }
genEquipServicesCetSpConfigSplitHorizon OBJECT-TYPE
SYNTAX SplitHorizonGroup
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Split Horizon Group."
::= { genEquipServicesCetSpConfigEntry 17 }
genEquipServicesCetSpConfigSvlanEgressPreserve OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Egress attribute - Preserve the S VLAN as it was on the Ingress Service Point."
::= { genEquipServicesCetSpConfigEntry 18 }
genEquipServicesCetSpConfigSvlanCosPreserve OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Egress attribute - Preserve the S VLAN CoS as it was on the Ingress Service Point."
::= { genEquipServicesCetSpConfigEntry 19 }
genEquipServicesCetSpConfigCvlanEgressPreserve OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Egress attribute - Preserve the C VLAN as it was on the Ingress Service Point."
::= { genEquipServicesCetSpConfigEntry 20 }
genEquipServicesCetSpConfigCvlanCosPreserve OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Egress attribute - Preserve the C VLAN CoS as it was on the Ingress Service Point."
::= { genEquipServicesCetSpConfigEntry 21 }
genEquipServicesCetSpConfigMarkingMode OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Ingress attribute - Enable / Disable Marking of the incoming packet."
::= { genEquipServicesCetSpConfigEntry 22 }
genEquipServicesCetSpConfigServiceClassId OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SP Egress attribute - Service Bundle ID."
::= { genEquipServicesCetSpConfigEntry 23 }
genEquipServicesCetSpConfigTcamClassification OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TCAM-Classification."
::= { genEquipServicesCetSpConfigEntry 24 }
genEquipServicesCetSpConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipServicesCetSpConfigEntry 30 }
--
-- Switch Application sw-ap-l4-srv-sp-ingress-policer-profile-association-to-cos-table
--
genEquipServicesCetSpPolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCetSpPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Service Point and Service Point CoS Policing configuration table."
::= { genEquipServicesCet 5 }
genEquipServicesCetSpPolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipServicesCetSpPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Service Point and Service Point CoS Policing configuration table."
INDEX { genEquipServicesCetSpPolicerAssociationServiceIndex,
genEquipServicesCetSpPolicerAssociationSpIndex }
::= { genEquipServicesCetSpPolicerAssociationTable 1 }
GenEquipServicesCetSpPolicerAssociationEntry ::=
SEQUENCE {
genEquipServicesCetSpPolicerAssociationServiceIndex
INTEGER,
genEquipServicesCetSpPolicerAssociationSpIndex
INTEGER,
genEquipServicesCetSpPolicerAssociationSpPolicerAdmin
EnableDisable,
genEquipServicesCetSpPolicerAssociationCos0Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos0Admin
EnableDisable,
genEquipServicesCetSpPolicerAssociationCos1Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos1Admin
EnableDisable,
genEquipServicesCetSpPolicerAssociationCos2Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos2Admin
INTEGER,
genEquipServicesCetSpPolicerAssociationCos3Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos3Admin
DisableAllowed,
genEquipServicesCetSpPolicerAssociationCos4Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos4Admin
EnableDisable,
genEquipServicesCetSpPolicerAssociationCos5Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos5Admin
EnableDisable,
genEquipServicesCetSpPolicerAssociationCos6Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos6Admin
EnableDisable,
genEquipServicesCetSpPolicerAssociationCos7Profile
INTEGER,
genEquipServicesCetSpPolicerAssociationCos7Admin
EnableDisable,
genEquipServicesCetSpPolicerAssociationRowStatus
RowStatus
}
genEquipServicesCetSpPolicerAssociationServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..1025)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 1 }
genEquipServicesCetSpPolicerAssociationSpIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Point ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 2 }
genEquipServicesCetSpPolicerAssociationSpPolicerAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 3 }
genEquipServicesCetSpPolicerAssociationCos0Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 0 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 4 }
genEquipServicesCetSpPolicerAssociationCos0Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 0 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 5 }
genEquipServicesCetSpPolicerAssociationCos1Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 1 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 6 }
genEquipServicesCetSpPolicerAssociationCos1Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 1 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 7 }
genEquipServicesCetSpPolicerAssociationCos2Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 2 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 8 }
genEquipServicesCetSpPolicerAssociationCos2Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 2 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 9 }
genEquipServicesCetSpPolicerAssociationCos3Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 3 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 10 }
genEquipServicesCetSpPolicerAssociationCos3Admin OBJECT-TYPE
SYNTAX DisableAllowed
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 3 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 11 }
genEquipServicesCetSpPolicerAssociationCos4Profile OBJECT-TYPE
SYNTAX SPCosMode (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 4 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 12 }
genEquipServicesCetSpPolicerAssociationCos4Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 4 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 13 }
genEquipServicesCetSpPolicerAssociationCos5Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 5 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 14 }
genEquipServicesCetSpPolicerAssociationCos5Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 5 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 15 }
genEquipServicesCetSpPolicerAssociationCos6Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 6 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 16 }
genEquipServicesCetSpPolicerAssociationCos6Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 6 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 17 }
genEquipServicesCetSpPolicerAssociationCos7Profile OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 7 Policer attached Profile ID."
::= { genEquipServicesCetSpPolicerAssociationEntry 18 }
genEquipServicesCetSpPolicerAssociationCos7Admin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 7 Policer Admin (enable / disable)."
::= { genEquipServicesCetSpPolicerAssociationEntry 19 }
genEquipServicesCetSpPolicerAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipServicesCetSpPolicerAssociationEntry 30 }
--
-- Switch Application sw-ap-l4-srv-sp-vlan-config-table
--
genEquipServicesCetSpVlanMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCetSpVlanMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point."
::= { genEquipServicesCet 6 }
genEquipServicesCetSpVlanMappingEntry OBJECT-TYPE
SYNTAX GenEquipServicesCetSpVlanMappingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the VLAN TAG ID that build a single ingress classification of Port+OutterVLAN+InnerVLAN to Service Point."
INDEX { genEquipServicesCetSpVlanMappingServiceId,
genEquipServicesCetSpVlanMappingSpId,
genEquipServicesCetSpVlanMappingSvlanIndex,
genEquipServicesCetSpVlanMappingCvlanIndex }
::= { genEquipServicesCetSpVlanMappingTable 1 }
GenEquipServicesCetSpVlanMappingEntry ::=
SEQUENCE {
genEquipServicesCetSpVlanMappingServiceId
INTEGER,
genEquipServicesCetSpVlanMappingSpId
INTEGER,
genEquipServicesCetSpVlanMappingSvlanIndex
INTEGER,
genEquipServicesCetSpVlanMappingCvlanIndex
INTEGER,
genEquipServicesCetSpVlanMappingVlanCosOverride
TrueFalse,
genEquipServicesCetSpVlanMappingVlanDefCos
INTEGER,
genEquipServicesCetSpVlanMappingColor
GreenYellow,
genEquipServicesCetSpVlanMappingIfIndex
INTEGER,
genEquipServicesCetSpVlanMappingIfSlotIndex
INTEGER,
genEquipServicesCetSpVlanMappingIfPortIndex
INTEGER,
genEquipServicesCetSpVlanMappingRowStatus
RowStatus
}
genEquipServicesCetSpVlanMappingServiceId OBJECT-TYPE
SYNTAX INTEGER (1..1025)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipServicesCetSpVlanMappingEntry 1 }
genEquipServicesCetSpVlanMappingSpId OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Point ID."
::= { genEquipServicesCetSpVlanMappingEntry 2 }
genEquipServicesCetSpVlanMappingSvlanIndex OBJECT-TYPE
SYNTAX INTEGER (0..4097)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"S-Vlan Encapsulation."
::= { genEquipServicesCetSpVlanMappingEntry 3 }
genEquipServicesCetSpVlanMappingCvlanIndex OBJECT-TYPE
SYNTAX INTEGER (0..4097)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C-Vlan Encapsulation."
::= { genEquipServicesCetSpVlanMappingEntry 4 }
genEquipServicesCetSpVlanMappingVlanCosOverride OBJECT-TYPE
SYNTAX TrueFalse
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The CoS Value field is valid."
::= { genEquipServicesCetSpVlanMappingEntry 5 }
genEquipServicesCetSpVlanMappingVlanDefCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS overwrite value."
::= { genEquipServicesCetSpVlanMappingEntry 6 }
genEquipServicesCetSpVlanMappingColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service Point COLOR."
::= { genEquipServicesCetSpVlanMappingEntry 7 }
genEquipServicesCetSpVlanMappingIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipServicesCetSpVlanMappingEntry 8 }
genEquipServicesCetSpVlanMappingIfSlotIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot index."
::= { genEquipServicesCetSpVlanMappingEntry 9 }
genEquipServicesCetSpVlanMappingIfPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port index."
::= { genEquipServicesCetSpVlanMappingEntry 10 }
genEquipServicesCetSpVlanMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipServicesCetSpVlanMappingEntry 30 }
--
-- Clear all interface egress queues statistics - sw-ap-l2-if-logical-egress-clear-all-queues-statistics-table
--
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Clear all interface egress queues statistics."
::= { genEquipServicesCet 7 }
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry OBJECT-TYPE
SYNTAX GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Clear all interface egress queues statistics."
INDEX { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex }
::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsTable 1 }
GenEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry ::=
SEQUENCE {
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex
INTEGER,
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead
NoYes
}
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ifIndex."
::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 1 }
genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsClearOnRead OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear all statistics for the specific port."
::= { genEquipServicesCETTmPmSpEgressClearAllL2InterfaceQueuesStatisticsEntry 2 }
--
-- Clear all Service egress queues statistics - sw-ap-l3-srv-egress-clear-all-queues-statistics-table
--
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Clear all Service egress queues statistics."
::= { genEquipServicesCet 8 }
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry OBJECT-TYPE
SYNTAX GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Clear all Service egress queues statistics."
INDEX { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex,
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex }
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsTable 1 }
GenEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry ::=
SEQUENCE {
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex
INTEGER,
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex
INTEGER,
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead
NoYes
}
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ifIndex."
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 1 }
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Egress service bundle ID."
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 2 }
genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsClearOnRead OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear on read."
::= { genEquipServicesCETTmPmSpEgressClearAllL3ServiceQueuesStatisticsEntry 3 }
--
-- The following are the Services part of Switch application tables
--
genEquipServicesTM OBJECT IDENTIFIER ::= {genEquipServices 6}
-- TM Mapping
genEquipTmMapping OBJECT IDENTIFIER ::= {genEquipServicesTM 1}
--
-- Switch Application sw-ap-global-ingress-mapping-802_1ad-up-to-cos-table
--
genEquipTmMappingSVlanPriToCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmMappingSVlanPriToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1AD classification table to CoS and Color."
::= { genEquipTmMapping 1 }
genEquipTmMappingSVlanPriToCosEntry OBJECT-TYPE
SYNTAX GenEquipTmMappingSVlanPriToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1AD classification table to CoS and Color entry."
INDEX { genEquipTmMappingSVlanPriToCosUpIndex,
genEquipTmMappingSVlanPriToCosDeiIndex }
::= { genEquipTmMappingSVlanPriToCosTable 1 }
GenEquipTmMappingSVlanPriToCosEntry ::=
SEQUENCE {
genEquipTmMappingSVlanPriToCosUpIndex
INTEGER,
genEquipTmMappingSVlanPriToCosDeiIndex
INTEGER,
genEquipTmMappingSVlanPriToCosCos
INTEGER,
genEquipTmMappingSVlanPriToCosColor
GreenYellow
}
genEquipTmMappingSVlanPriToCosUpIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User Priority bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
::= { genEquipTmMappingSVlanPriToCosEntry 1 }
genEquipTmMappingSVlanPriToCosDeiIndex OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DEI bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
::= { genEquipTmMappingSVlanPriToCosEntry 2 }
genEquipTmMappingSVlanPriToCosCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
::= { genEquipTmMappingSVlanPriToCosEntry 3 }
genEquipTmMappingSVlanPriToCosColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color bit - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
::= { genEquipTmMappingSVlanPriToCosEntry 4 }
--
-- Switch Application sw-ap-global-ingress-mapping-802_1q-up-to-cos-table
--
genEquipTmMappingCVlanPriToCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmMappingCVlanPriToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1Q classification table to CoS and Color."
::= { genEquipTmMapping 2 }
genEquipTmMappingCVlanPriToCosEntry OBJECT-TYPE
SYNTAX GenEquipTmMappingCVlanPriToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1Q classification table to CoS and Color entry."
INDEX { genEquipTmMappingCVlanPriToCosUpIndex,
genEquipTmMappingCVlanPriToCosCfiIndex }
::= { genEquipTmMappingCVlanPriToCosTable 1 }
GenEquipTmMappingCVlanPriToCosEntry ::=
SEQUENCE {
genEquipTmMappingCVlanPriToCosUpIndex
INTEGER,
genEquipTmMappingCVlanPriToCosCfiIndex
INTEGER,
genEquipTmMappingCVlanPriToCosCos
INTEGER,
genEquipTmMappingCVlanPriToCosColor
GreenYellow
}
genEquipTmMappingCVlanPriToCosUpIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User Priority bits - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
::= { genEquipTmMappingCVlanPriToCosEntry 1 }
genEquipTmMappingCVlanPriToCosCfiIndex OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CFI bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
::= { genEquipTmMappingCVlanPriToCosEntry 2 }
genEquipTmMappingCVlanPriToCosCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS bits - Global 802.1AD User Priority and DEI bits classification table to CoS and Color."
::= { genEquipTmMappingCVlanPriToCosEntry 3 }
genEquipTmMappingCVlanPriToCosColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color bit - Global 802.1Q User Priority and CFI bits classification table to CoS and Color."
::= { genEquipTmMappingCVlanPriToCosEntry 4 }
--
-- Switch Application sw-ap-global-ingress-mapping-dscp-to-cos-table
--
genEquipTmMappingDscpToCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmMappingDscpToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global DSCP bits classification table to CoS and Color."
::= { genEquipTmMapping 3 }
genEquipTmMappingDscpToCosEntry OBJECT-TYPE
SYNTAX GenEquipTmMappingDscpToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global DSCP bits classification table to CoS and Color entry."
INDEX { genEquipTmMappingDscpToCosDscpIndex }
::= { genEquipTmMappingDscpToCosTable 1 }
GenEquipTmMappingDscpToCosEntry ::=
SEQUENCE {
genEquipTmMappingDscpToCosDscpIndex
INTEGER,
genEquipTmMappingDscpToCosBinary
OCTET STRING,
genEquipTmMappingDscpToCosDescription
DisplayString,
genEquipTmMappingDscpToCosCos
INTEGER,
genEquipTmMappingDscpToCosColor
GreenYellow
}
genEquipTmMappingDscpToCosDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..56)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DSCP bits - Global DSCP bits classification table to CoS and Color."
::= { genEquipTmMappingDscpToCosEntry 1 }
genEquipTmMappingDscpToCosBinary OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Global DSCP bits classification table to CoS and Color."
::= { genEquipTmMappingDscpToCosEntry 2 }
genEquipTmMappingDscpToCosDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"user description field - Global DSCP bits classification table to CoS and Color."
::= { genEquipTmMappingDscpToCosEntry 3 }
genEquipTmMappingDscpToCosCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS bits - Global DSCP bits classification table to CoS and Color."
::= { genEquipTmMappingDscpToCosEntry 4 }
genEquipTmMappingDscpToCosColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color bit - Global DSCP bits classification table to CoS and Color."
::= { genEquipTmMappingDscpToCosEntry 5 }
--
-- Switch Application sw-ap-mapping-mpls-exp-to-cos-color
--
genEquipTmMappingMPLSExpPriToCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmMappingMPLSExpPriToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Color bit - Global MPLS EXP bits classification table to CoS and Color."
::= { genEquipTmMapping 4 }
genEquipTmMappingMPLSExpPriToCosEntry OBJECT-TYPE
SYNTAX GenEquipTmMappingMPLSExpPriToCosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Color bit - Global MPLS EXP bits classification table to CoS and Color entry."
INDEX { genEquipTmMappingMPLSExpPriToCosMplsExpIndex }
::= { genEquipTmMappingMPLSExpPriToCosTable 1 }
GenEquipTmMappingMPLSExpPriToCosEntry ::=
SEQUENCE {
genEquipTmMappingMPLSExpPriToCosMplsExpIndex
INTEGER,
genEquipTmMappingMPLSExpPriToCosCos
INTEGER,
genEquipTmMappingMPLSExpPriToCosColor
GreenYellow
}
genEquipTmMappingMPLSExpPriToCosMplsExpIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Experimental bits - Global MPLS EXP bits classification table to CoS and Color."
::= { genEquipTmMappingMPLSExpPriToCosEntry 1 }
genEquipTmMappingMPLSExpPriToCosCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS bit - Global MPLS EXP bits classification table to CoS and Color."
::= { genEquipTmMappingMPLSExpPriToCosEntry 2 }
genEquipTmMappingMPLSExpPriToCosColor OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Color bit - Global MPLS EXP bits classification table to CoS and Color."
::= { genEquipTmMappingMPLSExpPriToCosEntry 3 }
--
-- Switch Application sw-ap-global-egress-marking-802_1ad-table
--
genEquipTmMarkingSVlanPriTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmMarkingSVlanPriEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
::= { genEquipTmMapping 5 }
genEquipTmMarkingSVlanPriEntry OBJECT-TYPE
SYNTAX GenEquipTmMarkingSVlanPriEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI entry."
INDEX { genEquipTmMarkingSVlanPriCosIndex,
genEquipTmMarkingSVlanPriColorIndex }
::= { genEquipTmMarkingSVlanPriTable 1 }
GenEquipTmMarkingSVlanPriEntry ::=
SEQUENCE {
genEquipTmMarkingSVlanPriCosIndex
INTEGER,
genEquipTmMarkingSVlanPriColorIndex
GreenYellow,
genEquipTmMarkingSVlanPriUserPriority
INTEGER,
genEquipTmMarkingSVlanPriDEI
INTEGER
}
genEquipTmMarkingSVlanPriCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CoS bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
::= { genEquipTmMarkingSVlanPriEntry 1 }
genEquipTmMarkingSVlanPriColorIndex OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Color bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
::= { genEquipTmMarkingSVlanPriEntry 2 }
genEquipTmMarkingSVlanPriUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User Priority bits - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
::= { genEquipTmMarkingSVlanPriEntry 3 }
genEquipTmMarkingSVlanPriDEI OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DEI bit - Global 802.1AD Marking Table User CoS and Color to User Priority bits and DEI."
::= { genEquipTmMarkingSVlanPriEntry 4 }
--
-- Switch Application sw-ap-global-egress-marking-802_1q-table
--
genEquipTmMarkingCVlanPriTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmMarkingCVlanPriEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
::= { genEquipTmMapping 6 }
genEquipTmMarkingCVlanPriEntry OBJECT-TYPE
SYNTAX GenEquipTmMarkingCVlanPriEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI entry."
INDEX { genEquipTmMarkingCVlanPriCosIndex,
genEquipTmMarkingCVlanPriColorIndex }
::= { genEquipTmMarkingCVlanPriTable 1 }
GenEquipTmMarkingCVlanPriEntry ::=
SEQUENCE {
genEquipTmMarkingCVlanPriCosIndex
INTEGER,
genEquipTmMarkingCVlanPriColorIndex
GreenYellow,
genEquipTmMarkingCVlanPriUserPriority
INTEGER,
genEquipTmMarkingCVlanPriCFI
INTEGER
}
genEquipTmMarkingCVlanPriCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CoS bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
::= { genEquipTmMarkingCVlanPriEntry 1 }
genEquipTmMarkingCVlanPriColorIndex OBJECT-TYPE
SYNTAX GreenYellow
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Color bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
::= { genEquipTmMarkingCVlanPriEntry 2 }
genEquipTmMarkingCVlanPriUserPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User Priority bits - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
::= { genEquipTmMarkingCVlanPriEntry 3 }
genEquipTmMarkingCVlanPriCFI OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CFI bit - Global 802.1Q Marking Table User CoS and Color to User Priority bits and CFI."
::= { genEquipTmMarkingCVlanPriEntry 4 }
-- TM Profiles
genEquipTmProfiles OBJECT IDENTIFIER ::= {genEquipServicesTM 2}
--
-- Switch Application sw-ap-global-ingress-policer-profiles-list-table
--
genEquipProfilesPolicerTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesPolicerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"General Policer Profile configuration table."
::= { genEquipTmProfiles 1 }
genEquipProfilesPolicerEntry OBJECT-TYPE
SYNTAX GenEquipProfilesPolicerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"General Policer Profile configuration table entry."
INDEX { genEquipProfilesPolicerIndex }
::= { genEquipProfilesPolicerTable 1 }
GenEquipProfilesPolicerEntry ::=
SEQUENCE {
genEquipProfilesPolicerIndex
INTEGER,
genEquipProfilesPolicerDescription
DisplayString,
genEquipProfilesPolicerPolicerType
PolicerType,
genEquipProfilesPolicerCir
INTEGER,
genEquipProfilesPolicerCbs
INTEGER,
genEquipProfilesPolicerEir
INTEGER,
genEquipProfilesPolicerEbs
INTEGER,
genEquipProfilesPolicerColorMode
PolicerColorMode,
genEquipProfilesPolicerCouplingFlagMode
EnableDisable,
genEquipProfilesPolicerDataPlaneId
INTEGER,
genEquipProfilesPolicerRowStatus
RowStatus
}
genEquipProfilesPolicerIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"User Profile ID number."
::= { genEquipProfilesPolicerEntry 1 }
genEquipProfilesPolicerDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer user Description field."
::= { genEquipProfilesPolicerEntry 2 }
genEquipProfilesPolicerPolicerType OBJECT-TYPE
SYNTAX PolicerType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ingress Policer Type (MEF TrTCM,RFC2697,RFC2698)."
::= { genEquipProfilesPolicerEntry 3 }
genEquipProfilesPolicerCir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Commited Information Rate (CIR)."
::= { genEquipProfilesPolicerEntry 4 }
genEquipProfilesPolicerCbs OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Commited Burst Size (CBS)."
::= { genEquipProfilesPolicerEntry 5 }
genEquipProfilesPolicerEir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Excess Information Rate (EIR)."
::= { genEquipProfilesPolicerEntry 6 }
genEquipProfilesPolicerEbs OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Excess Burst Size (EBS)."
::= { genEquipProfilesPolicerEntry 7 }
genEquipProfilesPolicerColorMode OBJECT-TYPE
SYNTAX PolicerColorMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Color Mode (Color Aware or Color Blind)."
::= { genEquipProfilesPolicerEntry 8 }
genEquipProfilesPolicerCouplingFlagMode OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Coupling Flag between Green and Yellow leaky buckets."
::= { genEquipProfilesPolicerEntry 9 }
genEquipProfilesPolicerDataPlaneId OBJECT-TYPE
SYNTAX INTEGER (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The real policer ID in the dataplan 0 to 10000."
::= { genEquipProfilesPolicerEntry 10 }
genEquipProfilesPolicerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesPolicerEntry 30 }
--
-- Switch Application sw-ap-profile-egress-l4-wred-green-max-drop
--
genEquipProfilesL4WredTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesL4WredEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Green Curve Maximal Drop Ratio (in percentage)."
::= { genEquipTmProfiles 2 }
genEquipProfilesL4WredEntry OBJECT-TYPE
SYNTAX GenEquipProfilesL4WredEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Green Curve Maximal Drop Ratio (in percentage) entry."
INDEX { genEquipProfilesL4WredIndex }
::= { genEquipProfilesL4WredTable 1 }
GenEquipProfilesL4WredEntry ::=
SEQUENCE {
genEquipProfilesL4WredIndex
INTEGER,
genEquipProfilesL4WredGreenMinThreshold
INTEGER,
genEquipProfilesL4WredGreenMaxThreshold
INTEGER,
genEquipProfilesL4WredGreenMaxDrop
INTEGER,
genEquipProfilesL4WredYellowMinThreshold
INTEGER,
genEquipProfilesL4WredYellowMaxThreshold
INTEGER,
genEquipProfilesL4WredYellowMaxDrop
INTEGER,
genEquipProfilesL4WredYellowRowStatus
RowStatus
}
genEquipProfilesL4WredIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"WRED Curves Profile ID."
::= { genEquipProfilesL4WredEntry 1 }
genEquipProfilesL4WredGreenMinThreshold OBJECT-TYPE
SYNTAX INTEGER (0..8192)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green Curve Minimal occupancy (No drop until this level)."
::= { genEquipProfilesL4WredEntry 2 }
genEquipProfilesL4WredGreenMaxThreshold OBJECT-TYPE
SYNTAX INTEGER (0..8192)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green Curve Maximal occupancy (from this point 100% will be dropped)."
::= { genEquipProfilesL4WredEntry 3 }
genEquipProfilesL4WredGreenMaxDrop OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green Curve Maximal Drop Ratio (in percentage)."
::= { genEquipProfilesL4WredEntry 4 }
genEquipProfilesL4WredYellowMinThreshold OBJECT-TYPE
SYNTAX INTEGER (0..8192)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Yellow Curve Minimal occupancy (No drop until this level)."
::= { genEquipProfilesL4WredEntry 5 }
genEquipProfilesL4WredYellowMaxThreshold OBJECT-TYPE
SYNTAX INTEGER (0..8192)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Yellow Curve Maximal occupancy (from this point 100% will be dropped)."
::= { genEquipProfilesL4WredEntry 6 }
genEquipProfilesL4WredYellowMaxDrop OBJECT-TYPE
SYNTAX INTEGER (0..8192)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Yellow Curve Maximal Drop Ratio (in percentage)."
::= { genEquipProfilesL4WredEntry 7 }
genEquipProfilesL4WredYellowRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesL4WredEntry 30 }
--
-- Switch Application sw-ap-global-egress-scheduler-cos-priority-profiles-list-table
--
genEquipProfilesSchedulerCoSPriTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesSchedulerCoSPriEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port)."
::= { genEquipTmProfiles 3 }
genEquipProfilesSchedulerCoSPriEntry OBJECT-TYPE
SYNTAX GenEquipProfilesSchedulerCoSPriEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the Egress Scheduler Port priority profile (each profile contain 8 priorities per 8 queues of single port)."
INDEX { genEquipProfilesSchedulerCoSPriIndex }
::= { genEquipProfilesSchedulerCoSPriTable 1 }
GenEquipProfilesSchedulerCoSPriEntry ::=
SEQUENCE {
genEquipProfilesSchedulerCoSPriIndex
INTEGER,
genEquipProfilesSchedulerCoSPriCos0Description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos0Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos1description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos1Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos2Description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos2Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos3description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos3Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos4description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos4Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos5description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos5Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos6description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos6Priority
INTEGER,
genEquipProfilesSchedulerCoSPriCos7description
DisplayString,
genEquipProfilesSchedulerCoSPriGreenCos7Priority
INTEGER,
genEquipProfilesSchedulerCoSPriRowStatus
RowStatus
}
genEquipProfilesSchedulerCoSPriIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Profile ID."
::= { genEquipProfilesSchedulerCoSPriEntry 1 }
genEquipProfilesSchedulerCoSPriCos0Description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 0 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 2 }
genEquipProfilesSchedulerCoSPriGreenCos0Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 0 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 3 }
genEquipProfilesSchedulerCoSPriCos1description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 1 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 4 }
genEquipProfilesSchedulerCoSPriGreenCos1Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 1 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 5 }
genEquipProfilesSchedulerCoSPriCos2Description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 2 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 6 }
genEquipProfilesSchedulerCoSPriGreenCos2Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 2 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 7 }
genEquipProfilesSchedulerCoSPriCos3description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 3 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 8 }
genEquipProfilesSchedulerCoSPriGreenCos3Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 3 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 9 }
genEquipProfilesSchedulerCoSPriCos4description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 4 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 10 }
genEquipProfilesSchedulerCoSPriGreenCos4Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 4 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 11 }
genEquipProfilesSchedulerCoSPriCos5description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 5 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 12 }
genEquipProfilesSchedulerCoSPriGreenCos5Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 5 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 13 }
genEquipProfilesSchedulerCoSPriCos6description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 6 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 14 }
genEquipProfilesSchedulerCoSPriGreenCos6Priority OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 6 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 15 }
genEquipProfilesSchedulerCoSPriCos7description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 7 Description."
::= { genEquipProfilesSchedulerCoSPriEntry 16 }
genEquipProfilesSchedulerCoSPriGreenCos7Priority OBJECT-TYPE
SYNTAX INTEGER (1..42)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Green CoS 7 priority."
::= { genEquipProfilesSchedulerCoSPriEntry 17 }
genEquipProfilesSchedulerCoSPriRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesSchedulerCoSPriEntry 30 }
--
-- Switch Application sw-ap-global-egress-scheduler-wfq-profiles-list-table
--
genEquipProfilesSchedulerWfqTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesSchedulerWfqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port)."
::= { genEquipTmProfiles 4 }
genEquipProfilesSchedulerWfqEntry OBJECT-TYPE
SYNTAX GenEquipProfilesSchedulerWfqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the Egress Scheduler Port WFQ profiles (each profile contain 8 weights per 8 queues of single port)."
INDEX { genEquipProfilesSchedulerWfqIndex }
::= { genEquipProfilesSchedulerWfqTable 1 }
GenEquipProfilesSchedulerWfqEntry ::=
SEQUENCE {
genEquipProfilesSchedulerWfqIndex
INTEGER,
genEquipProfilesSchedulerWfqCos0Weight
INTEGER,
genEquipProfilesSchedulerWfqCos1Weight
INTEGER,
genEquipProfilesSchedulerWfqCos2Weight
INTEGER,
genEquipProfilesSchedulerWfqCos3Weight
INTEGER,
genEquipProfilesSchedulerWfqCos4Weight
INTEGER,
genEquipProfilesSchedulerWfqCos5Weight
INTEGER,
genEquipProfilesSchedulerWfqCos6Weight
INTEGER,
genEquipProfilesSchedulerWfqCos7Weight
INTEGER,
genEquipProfilesSchedulerWfqRowStatus
RowStatus
}
genEquipProfilesSchedulerWfqIndex OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"WFQ Profile ID."
::= { genEquipProfilesSchedulerWfqEntry 1 }
genEquipProfilesSchedulerWfqCos0Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 0 Weight."
::= { genEquipProfilesSchedulerWfqEntry 2 }
genEquipProfilesSchedulerWfqCos1Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 1 Weight."
::= { genEquipProfilesSchedulerWfqEntry 3 }
genEquipProfilesSchedulerWfqCos2Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 2 Weight."
::= { genEquipProfilesSchedulerWfqEntry 4 }
genEquipProfilesSchedulerWfqCos3Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 3 Weight."
::= { genEquipProfilesSchedulerWfqEntry 5 }
genEquipProfilesSchedulerWfqCos4Weight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 4 Weight."
::= { genEquipProfilesSchedulerWfqEntry 6 }
genEquipProfilesSchedulerWfqCos5Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Green CoS 2 priority."
::= { genEquipProfilesSchedulerWfqEntry 7 }
genEquipProfilesSchedulerWfqCos6Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 3 Description."
::= { genEquipProfilesSchedulerWfqEntry 8 }
genEquipProfilesSchedulerWfqCos7Weight OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CoS 7 Weight."
::= { genEquipProfilesSchedulerWfqEntry 9 }
genEquipProfilesSchedulerWfqRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesSchedulerWfqEntry 30 }
--
-- Switch Application sw-ap-l2-if-logical-profile-egress-shaper-table
--
genEquipProfilesL2ShaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesL2ShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the Egress Shaper profiles at port level."
::= { genEquipTmProfiles 5 }
genEquipProfilesL2ShaperEntry OBJECT-TYPE
SYNTAX GenEquipProfilesL2ShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the Egress Shaper profiles at port level."
INDEX { genEquipProfilesL2ShaperIndex }
::= { genEquipProfilesL2ShaperTable 1 }
GenEquipProfilesL2ShaperEntry ::=
SEQUENCE {
genEquipProfilesL2ShaperIndex
INTEGER,
genEquipProfilesL2ShaperDescription
DisplayString,
genEquipProfilesL2ShaperCir
INTEGER,
genEquipProfilesL2ShaperCbs
INTEGER,
genEquipProfilesL2ShaperBurstType
BurstType,
genEquipProfilesL2ShaperRowStatus
RowStatus
}
genEquipProfilesL2ShaperIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shaper Profile ID."
::= { genEquipProfilesL2ShaperEntry 1 }
genEquipProfilesL2ShaperDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shaper Description."
::= { genEquipProfilesL2ShaperEntry 2 }
genEquipProfilesL2ShaperCir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Committed Information Rate (in Bits)."
::= { genEquipProfilesL2ShaperEntry 3 }
genEquipProfilesL2ShaperCbs OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Committed Burst Size (in Bytes)."
::= { genEquipProfilesL2ShaperEntry 4 }
genEquipProfilesL2ShaperBurstType OBJECT-TYPE
SYNTAX BurstType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
::= { genEquipProfilesL2ShaperEntry 5 }
genEquipProfilesL2ShaperRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesL2ShaperEntry 30 }
--
-- Switch Application sw-ap-l3-srv-profile-egress-shaper-table
--
genEquipProfilesL3ServiceShaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesL3ServiceShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the Egress Shaper profiles at service level."
::= { genEquipTmProfiles 6 }
genEquipProfilesL3ServiceShaperEntry OBJECT-TYPE
SYNTAX GenEquipProfilesL3ServiceShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the Egress Shaper profiles at service level."
INDEX { genEquipProfilesL3ServiceShaperIndex }
::= { genEquipProfilesL3ServiceShaperTable 1 }
GenEquipProfilesL3ServiceShaperEntry ::=
SEQUENCE {
genEquipProfilesL3ServiceShaperIndex
INTEGER,
genEquipProfilesL3ServiceShaperDescription
DisplayString,
genEquipProfilesL3ServiceShaperCir
INTEGER,
genEquipProfilesL3ServiceShaperCbs
INTEGER,
genEquipProfilesL3ServiceShaperPir
INTEGER,
genEquipProfilesL3ServiceShaperPbs
INTEGER,
genEquipProfilesL3ServiceShaperBurstType
BurstType,
genEquipProfilesL3ServiceShaperRowStatus
RowStatus
}
genEquipProfilesL3ServiceShaperIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shaper Profile ID."
::= { genEquipProfilesL3ServiceShaperEntry 1 }
genEquipProfilesL3ServiceShaperDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shaper Description."
::= { genEquipProfilesL3ServiceShaperEntry 2 }
genEquipProfilesL3ServiceShaperCir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Committed Information Rate (in Bits)."
::= { genEquipProfilesL3ServiceShaperEntry 3 }
genEquipProfilesL3ServiceShaperCbs OBJECT-TYPE
SYNTAX INTEGER (1..1016)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Committed Burst Size (in Bytes)."
::= { genEquipProfilesL3ServiceShaperEntry 4 }
genEquipProfilesL3ServiceShaperPir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak Information Rate (in Bits)."
::= { genEquipProfilesL3ServiceShaperEntry 5 }
genEquipProfilesL3ServiceShaperPbs OBJECT-TYPE
SYNTAX INTEGER (1..1016)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peak Burst size (in Bytes)."
::= { genEquipProfilesL3ServiceShaperEntry 6 }
genEquipProfilesL3ServiceShaperBurstType OBJECT-TYPE
SYNTAX BurstType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CBS and PBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
::= { genEquipProfilesL3ServiceShaperEntry 7 }
genEquipProfilesL3ServiceShaperRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesL3ServiceShaperEntry 30 }
--
-- Switch Application sw-ap-l4-srv-sp-profile-egress-queue-shaper-table
--
genEquipProfilesEgressL4QueueShaperTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipProfilesEgressL4QueueShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the Egress Shaper profiles at Queue level."
::= { genEquipTmProfiles 7 }
genEquipProfilesEgressL4QueueShaperEntry OBJECT-TYPE
SYNTAX GenEquipProfilesEgressL4QueueShaperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the Egress Shaper profiles at Queue level."
INDEX { genEquipProfilesEgressL4QueueShaperIndex }
::= { genEquipProfilesEgressL4QueueShaperTable 1 }
GenEquipProfilesEgressL4QueueShaperEntry ::=
SEQUENCE {
genEquipProfilesEgressL4QueueShaperIndex
INTEGER,
genEquipProfilesEgressL4QueueShaperDescription
DisplayString,
genEquipProfilesEgressL4QueueShaperCir
INTEGER,
genEquipProfilesEgressL4QueueShaperCbs
INTEGER,
genEquipProfilesEgressL4QueueShaperBurstType
BurstType,
genEquipProfilesEgressL4QueueShaperRowStatus
RowStatus
}
genEquipProfilesEgressL4QueueShaperIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Shaper Profile ID."
::= { genEquipProfilesEgressL4QueueShaperEntry 1 }
genEquipProfilesEgressL4QueueShaperDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..21))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shaper Description."
::= { genEquipProfilesEgressL4QueueShaperEntry 2 }
genEquipProfilesEgressL4QueueShaperCir OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Committed Information Rate (in Bits)."
::= { genEquipProfilesEgressL4QueueShaperEntry 3 }
genEquipProfilesEgressL4QueueShaperCbs OBJECT-TYPE
SYNTAX INTEGER (1..1016)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Committed Burst Size (in Bytes)."
::= { genEquipProfilesEgressL4QueueShaperEntry 4 }
genEquipProfilesEgressL4QueueShaperBurstType OBJECT-TYPE
SYNTAX BurstType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CBS burst type - short (minimal) size or long burst (recomanded for long RTT)."
::= { genEquipProfilesEgressL4QueueShaperEntry 5 }
genEquipProfilesEgressL4QueueShaperRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipProfilesEgressL4QueueShaperEntry 30 }
-- TM Config
genEquipTmConfig OBJECT IDENTIFIER ::= {genEquipServicesTM 3}
--
-- Switch Application sw-ap-l4-srv-sp-egress-wred-profile-association-queue-table
--
genEquipTmL4WredAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmL4WredAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the user selelcted WRED profile for eac Egress Queue."
::= { genEquipTmConfig 1 }
genEquipTmL4WredAssociationEntry OBJECT-TYPE
SYNTAX GenEquipTmL4WredAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the user selelcted WRED profile for eac Egress Queue."
INDEX { genEquipTmL4WredAssociationIfIndex,
genEquipTmL4WredAssociationServiceIndex,
genEquipTmL4WredAssociationCosQueueIndex }
::= { genEquipTmL4WredAssociationTable 1 }
GenEquipTmL4WredAssociationEntry ::=
SEQUENCE {
genEquipTmL4WredAssociationIfIndex
INTEGER,
genEquipTmL4WredAssociationServiceIndex
INTEGER,
genEquipTmL4WredAssociationCosQueueIndex
INTEGER,
genEquipTmL4WredAssociationWredProfileId
INTEGER
}
genEquipTmL4WredAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipTmL4WredAssociationEntry 1 }
genEquipTmL4WredAssociationServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Bundle ID."
::= { genEquipTmL4WredAssociationEntry 2 }
genEquipTmL4WredAssociationCosQueueIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CoS Queue ID."
::= { genEquipTmL4WredAssociationEntry 3 }
genEquipTmL4WredAssociationWredProfileId OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WRED Profile ID."
::= { genEquipTmL4WredAssociationEntry 4 }
--
-- Switch Application sw-ap-l2-if-logical-egress-scheduler-cos-priority-profile-association-to-if-table
--
genEquipTmSchedulerCoSPriAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmSchedulerCoSPriAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the user selected Scheduler Priority Profile for each Egress port."
::= { genEquipTmConfig 2 }
genEquipTmSchedulerCoSPriAssociationEntry OBJECT-TYPE
SYNTAX GenEquipTmSchedulerCoSPriAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the user selected Scheduler Priority Profile for each Egress port."
INDEX { genEquipTmSchedulerCoSPriAssociationIfIndex }
::= { genEquipTmSchedulerCoSPriAssociationTable 1 }
GenEquipTmSchedulerCoSPriAssociationEntry ::=
SEQUENCE {
genEquipTmSchedulerCoSPriAssociationIfIndex
INTEGER,
genEquipTmSchedulerCoSPriAssociationAssociatedProfileId
INTEGER
}
genEquipTmSchedulerCoSPriAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipTmSchedulerCoSPriAssociationEntry 1 }
genEquipTmSchedulerCoSPriAssociationAssociatedProfileId OBJECT-TYPE
SYNTAX INTEGER (1..9)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Queue Scheduler Profile ID."
::= { genEquipTmSchedulerCoSPriAssociationEntry 2 }
--
-- Switch Application sw-ap-l3-srv-egress-shaper-profile-association-to-service-bundle-table
--
genEquipTmL3ServiceShaperAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmL3ServiceShaperAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the user selected Shapping profiles for each Service Bundle."
::= { genEquipTmConfig 3 }
genEquipTmL3ServiceShaperAssociationEntry OBJECT-TYPE
SYNTAX GenEquipTmL3ServiceShaperAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the user selected Shapping profiles for each Service Bundle."
INDEX { genEquipTmL3ServiceShaperAssociationIfIndex,
genEquipTmL3ServiceShaperAssociationServiceClassIndex }
::= { genEquipTmL3ServiceShaperAssociationTable 1 }
GenEquipTmL3ServiceShaperAssociationEntry ::=
SEQUENCE {
genEquipTmL3ServiceShaperAssociationIfIndex
INTEGER,
genEquipTmL3ServiceShaperAssociationServiceClassIndex
INTEGER,
genEquipTmL3ServiceShaperAssociationShaperProfileId
INTEGER,
genEquipTmL3ServiceShaperAssociationShaperAdmin
EnableDisable,
genEquipTmL3ServiceShaperAssociationRowStatus
RowStatus
}
genEquipTmL3ServiceShaperAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipTmL3ServiceShaperAssociationEntry 1 }
genEquipTmL3ServiceShaperAssociationServiceClassIndex OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Bundle ID."
::= { genEquipTmL3ServiceShaperAssociationEntry 2 }
genEquipTmL3ServiceShaperAssociationShaperProfileId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shaper Profile ID."
::= { genEquipTmL3ServiceShaperAssociationEntry 3 }
genEquipTmL3ServiceShaperAssociationShaperAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Shaper Admin."
::= { genEquipTmL3ServiceShaperAssociationEntry 4 }
genEquipTmL3ServiceShaperAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipTmL3ServiceShaperAssociationEntry 30 }
--
-- Switch Application sw-ap-l2-if-logical-egress-shaper-profile-association-to-if-table
--
genEquipTmL2ShaperAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmL2ShaperAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the user selected Shapping profiles for each Ethernet Port."
::= { genEquipTmConfig 4 }
genEquipTmL2ShaperAssociationEntry OBJECT-TYPE
SYNTAX GenEquipTmL2ShaperAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the user selected Shapping profiles for each Ethernet Port."
INDEX { genEquipTmL2ShaperAssociationIfIndex }
::= { genEquipTmL2ShaperAssociationTable 1 }
GenEquipTmL2ShaperAssociationEntry ::=
SEQUENCE {
genEquipTmL2ShaperAssociationIfIndex
INTEGER,
genEquipTmL2ShaperAssociationProfileId
INTEGER,
genEquipTmL2ShaperAssociationAdmin
EnableDisable,
genEquipTmL2ShaperAssociationRowStatus
RowStatus
}
genEquipTmL2ShaperAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipTmL2ShaperAssociationEntry 1 }
genEquipTmL2ShaperAssociationProfileId OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Shaper Profile ID."
::= { genEquipTmL2ShaperAssociationEntry 2 }
genEquipTmL2ShaperAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Shaper Admin."
::= { genEquipTmL2ShaperAssociationEntry 3 }
genEquipTmL2ShaperAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipTmL2ShaperAssociationEntry 30 }
--
-- Switch Application sw-ap-l4-srv-sp-egress-queue-shaper-profile-association-to-queue-table
--
genEquipTmL4QueueShaperAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmL4QueueShaperAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the user selected Shapping profiles for each Ethernet PortThe table holds the user selected Shapping profiles for each transmitting Queue."
::= { genEquipTmConfig 5 }
genEquipTmL4QueueShaperAssociationEntry OBJECT-TYPE
SYNTAX GenEquipTmL4QueueShaperAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the user selected Shapping profiles for each transmitting Queue."
INDEX { genEquipTmL4QueueShaperAssociationIfIndex,
genEquipTmL4QueueShaperAssociationServiceIndex,
genEquipTmL4QueueShaperAssociationCosQueueIndex }
::= { genEquipTmL4QueueShaperAssociationTable 1 }
GenEquipTmL4QueueShaperAssociationEntry ::=
SEQUENCE {
genEquipTmL4QueueShaperAssociationIfIndex
INTEGER,
genEquipTmL4QueueShaperAssociationServiceIndex
INTEGER,
genEquipTmL4QueueShaperAssociationCosQueueIndex
INTEGER,
genEquipTmL4QueueShaperAssociationShaperProfileId
INTEGER,
genEquipTmL4QueueShaperAssociationShaperProfileAdmin
EnableDisable,
genEquipTmL4QueueShaperAssociationRowStatus
RowStatus
}
genEquipTmL4QueueShaperAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipTmL4QueueShaperAssociationEntry 1 }
genEquipTmL4QueueShaperAssociationServiceIndex OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Service Bundle ID."
::= { genEquipTmL4QueueShaperAssociationEntry 2 }
genEquipTmL4QueueShaperAssociationCosQueueIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CoS Queue ID."
::= { genEquipTmL4QueueShaperAssociationEntry 3 }
genEquipTmL4QueueShaperAssociationShaperProfileId OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Queue Shaper Profile ID."
::= { genEquipTmL4QueueShaperAssociationEntry 4 }
genEquipTmL4QueueShaperAssociationShaperProfileAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Queue Shaper Admin."
::= { genEquipTmL4QueueShaperAssociationEntry 5 }
genEquipTmL4QueueShaperAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipTmL4QueueShaperAssociationEntry 30 }
--
-- Switch Application sw-ap-l2-if-logical-egress-scheduler-cos-wfq-profile-association-to-if-table
--
genEquipTmSchedulerWfqAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipTmSchedulerWfqAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the user selected Scheduler WFQ weights Profile for each Egress port."
::= { genEquipTmConfig 6 }
genEquipTmSchedulerWfqAssociationEntry OBJECT-TYPE
SYNTAX GenEquipTmSchedulerWfqAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the user selected Scheduler WFQ weights Profile for each Egress port."
INDEX { genEquipTmSchedulerWfqAssociationIfIndex }
::= { genEquipTmSchedulerWfqAssociationTable 1 }
GenEquipTmSchedulerWfqAssociationEntry ::=
SEQUENCE {
genEquipTmSchedulerWfqAssociationIfIndex
INTEGER,
genEquipTmSchedulerWfqAssociationProfileId
INTEGER
}
genEquipTmSchedulerWfqAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipTmSchedulerWfqAssociationEntry 1 }
genEquipTmSchedulerWfqAssociationProfileId OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"WFQ Scheduler Profile ID"
::= { genEquipTmSchedulerWfqAssociationEntry 2 }
-- The following tables are accessed by its slot, there is no indirect access to this tables through main slot
-- Radio Clock Source
genEquipSynchronizationRadioClkSrcSource OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameters determines whether the system reference frequency is transported through the radio.
0 indicates that the outgoing signal takes its clock from an independant local clock.
channel number indicates that the clock is from that radio-channel reference clock,
as taken from the synchronization source interface."
::= { genEquipSynchronization 3 }
genEquipSynchronizationSDHClkSrcSource OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameters determines whether the system reference frequency is transported
through the interface. if value is 0 it indicates that the outgoing signal takes its
clock from an independant local clock.
system-clock-source indicates that the clock is from the system reference clock,
as taken from the synchronization source interface."
::= { genEquipSynchronization 4 }
genEquipSynchronizationPDHClkSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipSynchronizationPDHClkSrcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Synchronization source table."
::= { genEquipSynchronization 5 }
genEquipSynchronizationPDHClkSrcEntry OBJECT-TYPE
SYNTAX GenEquipSynchronizationPDHClkSrcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Synchronization source table."
INDEX { genEquipSynchronizationPDHClkSrcIFNum }
::= { genEquipSynchronizationPDHClkSrcTable 1 }
GenEquipSynchronizationPDHClkSrcEntry ::=
SEQUENCE {
genEquipSynchronizationPDHClkSrcIFNum
INTEGER,
genEquipSynchronizationPDHClkSrcSource
INTEGER
}
genEquipSynchronizationPDHClkSrcIFNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameters the interface which is configured to take the system reference clock
or a local clock in genEquipSynchronizationSDHClkSrcSource.
The number indicates the E1/DS1 interface being configured (1-32)."
::= { genEquipSynchronizationPDHClkSrcEntry 2 }
genEquipSynchronizationPDHClkSrcSource OBJECT-TYPE
SYNTAX INTEGER {
local-clock(0),
system-clock-source(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameters determines whether the system reference frequency is transported
through the interface defined in genEquipSynchronizationPDHClkSrcIFNum.
local-clock indicates that the outgoing signal takes its clock from an independant local clock.
system-clock-source indicates that the clock is from the system reference clock,
as taken from the synchronization source interface."
::= { genEquipSynchronizationPDHClkSrcEntry 3 }
genEquipSynchronizationPRCRegeneratorMode OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter sets the IDU to point-to-point PRC quality frequency distribution mode.
Notice that this is relevant only for smart pipe applications"
::= { genEquipSynchronization 6 }
genEquipSynchronizationPRCRegeneratorDirection OBJECT-TYPE
SYNTAX INTEGER {
line-to-radio (0),
radio-to-line (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter sets the direction in which the frequency signal is transported,
in the case of electrical GBE interfaces.
Notice that for optical interfaces, this parameter has no effect."
::= { genEquipSynchronization 7 }
genEquipSynchronizationSrcRevertiveTimer OBJECT-TYPE
SYNTAX INTEGER (0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this parameter sets the timeout (in seconds) for a counter which is set once
an interface recovers from a failure; after this timeout the interface will be considered
stable and can be used as a synchronization source. A value of zero means no timer."
::= { genEquipSynchronization 8 }
genEquipSynchronizationSrcActiveSyncSourceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The active synchronization source."
::= { genEquipSynchronization 9 }
genEquipSynchronizationNodeMode OBJECT-TYPE
SYNTAX INTEGER {
automatic (0),
force (1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows forcing a certain source as the active source for the system reference clock.
When forced, the active source is specified by genEquipSynchronizationForceSource.
In automatic mode, the active source is determined by quality and priority of the relevant interfaces
(as configured in table genEquipSynchronizationSrcTable)."
::= { genEquipSynchronization 10 }
genEquipSynchronizationForceSource OBJECT-TYPE
SYNTAX INTEGER (0..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter determines which source number will be forced as active when genEquipSynchronizationNodeMode is set to force."
::= { genEquipSynchronization 11 }
genEquipSynchronizationSystemReferenceQuality OBJECT-TYPE
SYNTAX INTEGER {
automatic(0),
prs(1),
g811(2),
transit-node(3),
ssu-a(4),
unknown(5),
stratum2(7),
ssu-b(8),
stratum3(10),
g813-8262(11),
smc(12),
stratum3e(13),
do-not-use (15)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This parameter shows the current quality of the system reference clock"
::= { genEquipSynchronization 12 }
genEquipSynchronizationRegeneratorSSMAdmin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter determines whether or not in pipe mode the system generates SSM messages"
::= { genEquipSynchronization 13 }
genEquipSynchronizationPWClkExport OBJECT-TYPE
SYNTAX INTEGER {
local-clock(0),
system-clock-source(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter determines whether the system reference clock is exported toward the PWE3 T-Card;
This reference can be exported towards front panel using ExportClkFrontPannel or used as a common clock for
PWs using ClockSourceRef. Notice that either this or any single one of the PW T-card TDM interfaces can export the reference clock,
but not both at the same time."
::= { genEquipSynchronization 14 }
-- Synch Pipe Configurations - sync-pipe-config-table
--
genEquipSynchronizationPipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipSynchronizationPipeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table shows pipe interfaces."
::= { genEquipSynchronization 20 }
genEquipSynchronizationPipeEntry OBJECT-TYPE
SYNTAX GenEquipSynchronizationPipeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry shows pipe interfaces."
INDEX { genEquipSynchronizationPipeId }
::= { genEquipSynchronizationPipeTable 1 }
GenEquipSynchronizationPipeEntry ::=
SEQUENCE {
genEquipSynchronizationPipeId
INTEGER,
genEquipSynchronizationPipeInd1
INTEGER,
genEquipSynchronizationPipeInd2
INTEGER,
genEquipSynchronizationPipeStatus
INTEGER
}
genEquipSynchronizationPipeId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Pipe ID."
::= { genEquipSynchronizationPipeEntry 1 }
genEquipSynchronizationPipeInd1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sync Interface 1."
::= { genEquipSynchronizationPipeEntry 2 }
genEquipSynchronizationPipeInd2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sync Interface 2."
::= { genEquipSynchronizationPipeEntry 3 }
genEquipSynchronizationPipeStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sync Pipe Status."
::= { genEquipSynchronizationPipeEntry 4 }
-- PTP (Precision Time Protocol)
genEquipSynchronizationPTP OBJECT IDENTIFIER ::= {genEquipSynchronization 21}
genEquipSynchronizationPTPTcAdmin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transparent Clock (TC) administrative state."
::= { genEquipSynchronizationPTP 1 }
-- TC configuartion - ptp-tc-config-table
--
genEquipSynchronizationPTPTcConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipSynchronizationPTPTcConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PTP (Precision Time Protocol) TC (Transparent Clock) configuration table."
::= { genEquipSynchronizationPTP 10 }
genEquipSynchronizationPTPTcConfigEntry OBJECT-TYPE
SYNTAX GenEquipSynchronizationPTPTcConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PTP (Precision Time Protocol) TC (Transparent Clock) configuration table entry."
INDEX { genEquipSynchronizationPTPTcConfigId }
::= { genEquipSynchronizationPTPTcConfigTable 1 }
GenEquipSynchronizationPTPTcConfigEntry ::=
SEQUENCE {
genEquipSynchronizationPTPTcConfigId
INTEGER,
genEquipSynchronizationPTPTcConfigMaster
INTEGER
}
genEquipSynchronizationPTPTcConfigId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interface on which TC function is required."
::= { genEquipSynchronizationPTPTcConfigEntry 1 }
genEquipSynchronizationPTPTcConfigMaster OBJECT-TYPE
SYNTAX INTEGER {
upstream(0),
downstream(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Points whether the interface's direction is upstream or downstream."
::= { genEquipSynchronizationPTPTcConfigEntry 2 }
-- TC Status - ptp-tc-status-table
--
genEquipSynchronizationPTPTcStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipSynchronizationPTPTcStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PTP (Precision Time Protocol) TC (Transparent Clock) status table."
::= { genEquipSynchronizationPTP 11 }
genEquipSynchronizationPTPTcStatusEntry OBJECT-TYPE
SYNTAX GenEquipSynchronizationPTPTcStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PTP (Precision Time Protocol) TC (Transparent Clock) status table entry."
INDEX { genEquipSynchronizationPTPTcStatusId }
::= { genEquipSynchronizationPTPTcStatusTable 1 }
GenEquipSynchronizationPTPTcStatusEntry ::=
SEQUENCE {
genEquipSynchronizationPTPTcStatusId
INTEGER,
genEquipSynchronizationPTPTcStatusState
INTEGER,
genEquipSynchronizationPTPTcStatusFreqLock
DownUp
}
genEquipSynchronizationPTPTcStatusId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface on which TC status is required."
::= { genEquipSynchronizationPTPTcStatusEntry 1 }
genEquipSynchronizationPTPTcStatusState OBJECT-TYPE
SYNTAX INTEGER {
down(0),
init(1),
calibrating(2),
up(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the TC function that may be: Down, Init, Calibrating or Up."
::= { genEquipSynchronizationPTPTcStatusEntry 2 }
genEquipSynchronizationPTPTcStatusFreqLock OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lock status, Up or Down, of the network synchronization frequency that passes through the interface."
::= { genEquipSynchronizationPTPTcStatusEntry 3 }
-- Interfaces
genEquipInterfaces OBJECT IDENTIFIER ::= {genEquip 9}
-- Interfaces - Ethernet
genEquipInterfacesEther OBJECT IDENTIFIER ::= {genEquipInterfaces 1}
genEquipInterfacesEtherTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesEtherEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet interface configuration and status table.
The index of the table is via ifIndex, as well as the operational status and the admin state,
speed and port connector."
::= { genEquipInterfacesEther 1 }
genEquipInterfacesEtherEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesEtherEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet interface configuration and status table.
The index of the table is via ifIndex, as well as the operational status and the admin state,
speed and port connector."
INDEX { ifIndex }
::= { genEquipInterfacesEtherTable 1 }
GenEquipInterfacesEtherEntry ::=
SEQUENCE {
genEquipInterfacesEtherConnType
INTEGER,
genEquipInterfacesEtherPortType
INTEGER,
genEquipInterfacesEtherAutoNegotiation
INTEGER,
genEquipInterfacesEtherDuplex
HalfFull,
genEquipInterfacesEtherRate
RateMbps,
genEquipInterfacesEtherPortLerningAdmin
EnableDisable,
genEquipInterfacesEtherFlowCtrl
INTEGER,
genEquipInterfacesEtherLagPortMember
INTEGER,
genEquipInterfacesEtherActualDuplex
HalfFull,
genEquipInterfacesEtherActualRate
RateMbps,
genEquipInterfacesEtherClkSrc
INTEGER,
genEquipInterfacesEtherPortServiceType
INTEGER,
genEquipInterfacesEtheMACAddress
MacAddress,
genEquipInterfacesEtherDefaultVLANId
INTEGER,
genEquipInterfacesEtherPortBlockSharedVlans
EnableDisable
}
genEquipInterfacesEtherConnType OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
rj45(0),
electricalSFP(1),
opticalSFP(2),
radio(3),
sfp100base-fx(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The physical interface type. For port 8 the only valid value is radio. For ports 3 to 7 the only valid
value is rj45."
::= { genEquipInterfacesEtherEntry 1 }
genEquipInterfacesEtherPortType OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
access(0),
trunk(1),
hybrid(2),
cN(3),
pN(4),
management(30),
wayside(31)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of the port.
Access - untagged port (in case of managed switch).
Trunk - C-VID tagged port (in case of managed switch).
CN - Don't care on the vlan tag (in case of metro switch configuration).
SN - S-VID is used as the first vlan (in case of metro switch configuration)."
::= { genEquipInterfacesEtherEntry 2 }
genEquipInterfacesEtherAutoNegotiation OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
off(0),
on(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable auto-negotiation on the port."
::= { genEquipInterfacesEtherEntry 3 }
genEquipInterfacesEtherDuplex OBJECT-TYPE
SYNTAX HalfFull
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Half or full duplex."
::= { genEquipInterfacesEtherEntry 4 }
genEquipInterfacesEtherRate OBJECT-TYPE
SYNTAX RateMbps
ACCESS read-write
STATUS mandatory
DESCRIPTION
"10, 100 OR 1000 Mbps."
::= { genEquipInterfacesEtherEntry 5 }
genEquipInterfacesEtherPortLerningAdmin OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
enable(2),
disable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable MAC address learning in the port."
::= { genEquipInterfacesEtherEntry 6 }
genEquipInterfacesEtherFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
off(0),
on(1),
na(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable flow control on the port. Supported only in pipe mode. "
::= { genEquipInterfacesEtherEntry 7 }
genEquipInterfacesEtherLagPortMember OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
not-aggrigated(0),
group-1(1),
group-2(2),
group-3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The syntax is ifIndex, or FFFF for port that is not member in a lag."
::= { genEquipInterfacesEtherEntry 8 }
genEquipInterfacesEtherActualDuplex OBJECT-TYPE
SYNTAX HalfFull
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual duplex (in auto-negotiation, the mode the two ports agreed upon) - Half or full duplex."
::= { genEquipInterfacesEtherEntry 9 }
genEquipInterfacesEtherActualRate OBJECT-TYPE
SYNTAX RateMbps
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual rate (in auto-negotiation, the rate the two ports agreed upon) - 10, 100 OR 1000 Mbps."
::= { genEquipInterfacesEtherEntry 10 }
genEquipInterfacesEtherClkSrc OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
local-clock(0),
system-clock-source(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source for the outgoing carrier signal clock. Local-clock is an internal independent oscilator.
system-clock-source causes the ethernet clock to be derived from the defined system clock source
(which can be taken from another interface)
Note: changing this parameter per port affect all the Ethernet ports."
::= { genEquipInterfacesEtherEntry 11 }
genEquipInterfacesEtherPortServiceType OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
sap(0),
snp(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter indicates whether the port is being used as a Service Access Point (SAP)
or as a Service Network Point (SNP) in a network-wide Ethernet service;
the parameter has no functionality, but is meant to hold data for the NMS."
::= { genEquipInterfacesEtherEntry 12 }
genEquipInterfacesEtheMACAddress
OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the port for CFM or PWE3 addressing purposes."
::= { genEquipInterfacesEtherEntry 13 }
genEquipInterfacesEtherDefaultVLANId
OBJECT-TYPE
SYNTAX INTEGER (1..4090)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Default VLAN ID of the Ethernet interface."
::= { genEquipInterfacesEtherEntry 14 }
genEquipInterfacesEtherPortBlockSharedVlans
OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When enabled, this parameter blocks transfer of Ethernet frames to/from other ports
for which it is enabled, effectively eliminating all shared VLANs."
::= { genEquipInterfacesEtherEntry 15 }
---------------
genEquipInterfacesEtherStatePropagation OBJECT-TYPE
SYNTAX INTEGER {
none(0) ,
lof-loc(1) ,
lof-loc-excber(3) ,
lof-loc-remote(5) ,
lof-loc-excber-remote(7) ,
lof(9) ,
lof-excber(11) ,
lof-remote(13) ,
lof-excber-remote(15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter configures the behavior of Ethernet ports in single
pipe mode. When a failure is detected, ports will be automatically shut
down when the configured conditions take place. The possible choices
are a combination of the following failures in the local and the remote IDUs:
radio LOF, Ethernet line LOC, radio excessive ber"
::= { genEquipInterfacesEther 2 }
genEquipInterfacesEtherPWPort OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port in the traffic bridge connected to the PWE3 T-card."
::= { genEquipInterfacesEther 3 }
-- Interfaces E1/T1
genEquipInterfacesE1T1 OBJECT IDENTIFIER ::= {genEquipInterfaces 2}
genEquipInterfacesE1T1PortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesE1T1PortGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"General parameters for group of E1 or T1 interfaces."
::= { genEquipInterfacesE1T1 1 }
genEquipInterfacesE1T1PortGroupEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesE1T1PortGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"General parameters for group of E1 or T1 interfaces."
INDEX { genEquipInterfacesE1T1PortGroupId }
::= { genEquipInterfacesE1T1PortGroupTable 1 }
GenEquipInterfacesE1T1PortGroupEntry ::=
SEQUENCE {
genEquipInterfacesE1T1PortGroupId
INTEGER,
genEquipInterfacesE1T1PortGroupLineCode
INTEGER,
genEquipInterfacesE1T1PortGroupExcessiveBERthreshold
BerLevel,
genEquipInterfacesE1T1PortGroupSignalDegradeThreshold
INTEGER,
genEquipInterfacesE1T1PortGroupLineCode1to8
INTEGER,
genEquipInterfacesE1T1PortGroupLineCode9to16
INTEGER,
genEquipInterfacesE1T1PortGroupLineCode17to24
INTEGER,
genEquipInterfacesE1T1PortGroupLineCode25to32
INTEGER
}
genEquipInterfacesE1T1PortGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Group id. the index of this table."
::= { genEquipInterfacesE1T1PortGroupEntry 1 }
genEquipInterfacesE1T1PortGroupLineCode OBJECT-TYPE
SYNTAX INTEGER {
b8zs(1),
ami(2),
hdb3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PDH line coding. b8zs is for T1 and hdb3 for E1.
ami is only for T1. This parameter is
relevant only for versions up to 6.6.0.0.1.53 (including)."
::= { genEquipInterfacesE1T1PortGroupEntry 2 }
genEquipInterfacesE1T1PortGroupExcessiveBERthreshold OBJECT-TYPE
SYNTAX BerLevel
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Excessive BER threshold for the group of E1s/T1s."
::= { genEquipInterfacesE1T1PortGroupEntry 3 }
genEquipInterfacesE1T1PortGroupSignalDegradeThreshold OBJECT-TYPE
SYNTAX INTEGER { n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Signal degrade threshold for the group of E1s/T1s."
::= { genEquipInterfacesE1T1PortGroupEntry 4 }
genEquipInterfacesE1T1PortGroupLineCode1to8 OBJECT-TYPE
SYNTAX INTEGER {
b8zs(1),
ami(2),
hdb3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PDH line coding for line interfaces 1 to 8.
b8zs is for T1 and hdb3 for E1. ami is only for T1."
::= { genEquipInterfacesE1T1PortGroupEntry 5 }
genEquipInterfacesE1T1PortGroupLineCode9to16 OBJECT-TYPE
SYNTAX INTEGER {
b8zs(1),
ami(2),
hdb3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PDH line coding for line interfaces 9 to 16.
b8zs is for T1 and hdb3 for E1. ami is only for T1."
::= { genEquipInterfacesE1T1PortGroupEntry 6 }
genEquipInterfacesE1T1PortGroupLineCode17to24 OBJECT-TYPE
SYNTAX INTEGER {
b8zs(1),
ami(2),
hdb3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PDH line coding for line interfaces 17 to 24.
b8zs is for T1 and hdb3 for E1. ami is only for T1."
::= { genEquipInterfacesE1T1PortGroupEntry 7 }
genEquipInterfacesE1T1PortGroupLineCode25to32 OBJECT-TYPE
SYNTAX INTEGER {
b8zs(1),
ami(2),
hdb3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PDH line coding for interfaces 25 to 32.
b8zs is for T1 and hdb3 for E1. ami is only for T1."
::= { genEquipInterfacesE1T1PortGroupEntry 8 }
genEquipInterfacesE1T1Table OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesE1T1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"E1/T1 interface configuration table."
::= { genEquipInterfacesE1T1 2 }
genEquipInterfacesE1T1Entry OBJECT-TYPE
SYNTAX GenEquipInterfacesE1T1Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"E1/T1 interface configuration table."
INDEX { ifIndex }
::= { genEquipInterfacesE1T1Table 1 }
GenEquipInterfacesE1T1Entry ::=
SEQUENCE {
genEquipInterfacesE1T1Priority
INTEGER,
genEquipInterfacesE1T1CurrBER
BerLevel,
genEquipInterfacesE1T1Loopback
INTEGER,
genEquipInterfacesE1T1AISSStatus
INTEGER,
genEquipInterfacesE1T1CableLength
INTEGER
}
genEquipInterfacesE1T1Priority OBJECT-TYPE
SYNTAX INTEGER { low(1), high(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ACM priority of the E1/T1.
This parameter is relevant only for stand-alone mode.
In shelf this parameter is defined in the trail configuration."
::= { genEquipInterfacesE1T1Entry 1 }
genEquipInterfacesE1T1CurrBER OBJECT-TYPE
SYNTAX BerLevel
ACCESS read-only
STATUS mandatory
DESCRIPTION
"E1/T1 current BER."
::= { genEquipInterfacesE1T1Entry 2 }
genEquipInterfacesE1T1Loopback OBJECT-TYPE
SYNTAX INTEGER {
off(1),
towardsLine(2),
towardsRadio(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or Disable line loopback on the E1/T1 interface."
::= { genEquipInterfacesE1T1Entry 3 }
genEquipInterfacesE1T1AISSStatus OBJECT-TYPE
SYNTAX INTEGER {
detected(0),
notDetected(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the AIS detection, if the AIS detection is activated."
::= { genEquipInterfacesE1T1Entry 4 }
genEquipInterfacesE1T1CableLength OBJECT-TYPE
SYNTAX INTEGER {
len-0-133ft-0-41m(1),
len-133ft-266ft-41m-81m(2),
len-266ft-399ft-81m-122m(3),
len-399ft-533ft-122m-162m(4),
len-533ft-655ft-162m-200m(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter is valid only for T1 interfaces, and determines cable length range."
::= { genEquipInterfacesE1T1Entry 5 }
genEquipInterfacesAux OBJECT IDENTIFIER ::= {genEquipInterfaces 3}
-- Interfaces Way Side
genEquipInterfacesAuxWaySide OBJECT IDENTIFIER ::= {genEquipInterfacesAux 1}
genEquipInterfacesAuxWaySideTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesAuxWaySideEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Way-side interface configuration."
::= { genEquipInterfacesAuxWaySide 1 }
genEquipInterfacesAuxWaySideEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesAuxWaySideEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Way-side interface configuration."
INDEX { ifIndex }
::= { genEquipInterfacesAuxWaySideTable 1 }
GenEquipInterfacesAuxWaySideEntry ::=
SEQUENCE {
genEquipInterfacesAuxWaySideAdmin
EnableDisable,
genEquipInterfacesAuxWaySideCapacity
INTEGER,
genEquipInterfacesAuxWaySideAutoNegotiation
OffOn,
genEquipInterfacesAuxWaySideDuplex
INTEGER,
genEquipInterfacesAuxWaySideRate
RateMbps
}
genEquipInterfacesAuxWaySideAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable - Set Ethernet port #4 to be a wayside port. Disabling this option will cause the port to behave
as a normal traffic Ethernet port."
::= { genEquipInterfacesAuxWaySideEntry 1 }
genEquipInterfacesAuxWaySideCapacity OBJECT-TYPE
SYNTAX INTEGER { narrow(0), wide(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Narrow band (64Kbps) or Wide band (2Mbps)"
::= { genEquipInterfacesAuxWaySideEntry 2 }
genEquipInterfacesAuxWaySideAutoNegotiation OBJECT-TYPE
SYNTAX OffOn
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside port auto negotiation (Off, on)"
::= { genEquipInterfacesAuxWaySideEntry 3 }
genEquipInterfacesAuxWaySideDuplex OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
half(0),
full(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside port duplex (Half, Full)"
::= { genEquipInterfacesAuxWaySideEntry 4 }
genEquipInterfacesAuxWaySideRate OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(-1),
n10(0),
n100(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Wayside interface port rate (10Mbps,100Mbps)"
::= { genEquipInterfacesAuxWaySideEntry 5 }
-- Interfaces User channel
genEquipInterfacesAuxUserChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesAuxUserChanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of configured user channels."
::= { genEquipInterfacesAux 2 }
genEquipInterfacesAuxUserChanEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesAuxUserChanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of configured user channels."
INDEX { ifIndex }
::= { genEquipInterfacesAuxUserChanTable 1 }
GenEquipInterfacesAuxUserChanEntry ::=
SEQUENCE {
genEquipInterfacesAuxUserChanType
INTEGER
}
genEquipInterfacesAuxUserChanType OBJECT-TYPE
SYNTAX INTEGER {
asynchronous-rs232(1),
asynchronous-v-11(2),
twin-asynchronous-rs232-and-v-11(3),
synchronous-v-11-codirectional(4),
synchronous-v-11-contradirectional(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User channel type. The asynchronous modes allow two channels, one in each port.
The twin asynchronous mode uses port 1 for v.11 and port 2 for RS-232.
The Synchronous modes use two ports each"
::= { genEquipInterfacesAuxUserChanEntry 1 }
-- Interfaces Sonet/SDH
genEquipInterfacesSdh OBJECT IDENTIFIER ::= {genEquipInterfaces 4}
genEquipInterfacesSdhTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesSdhEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1,OC-3 interface configuration and status table. "
::= { genEquipInterfacesSdh 1 }
genEquipInterfacesSdhEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesSdhEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1,OC-3 interface configuration and status table."
INDEX { ifIndex }
::= { genEquipInterfacesSdhTable 1 }
GenEquipInterfacesSdhEntry ::=
SEQUENCE {
genEquipInterfacesSdhMuteTx
EnableDisableSMI2,
genEquipInterfacesSdhClockSource
INTEGER,
genEquipInterfacesSdhAISAdmin
EnableDisable,
genEquipInterfacesSdhTraceIdReceived
DisplayString,
genEquipInterfacesSdhTraceIdTransmitted
DisplayString,
genEquipInterfacesSdhTraceIdExpected
DisplayString,
genEquipInterfacesSdhTraceIdStringLength
INTEGER,
genEquipInterfacesSdhExcessiveBer
INTEGER,
genEquipInterfacesSdhSignalDegrade
INTEGER,
genEquipInterfacesSdhLoopback
INTEGER,
genEquipInterfacesSdhClockSourceStatus
INTEGER,
genEquipInterfacesSdhLineTxProtectionMode
INTEGER,
genEquipInterfacesSdhSyncVC
INTEGER,
genEquipInterfacesSdhAdmin
EnableDisableSMI2,
genEquipInterfacesSdhPdhTimingMode
PWPDHClockSource,
genEquipInterfacesSdhSlot
INTEGER,
genEquipInterfacesSdhIdleCode
INTEGER,
genEquipInterfacesSdhSSMAdmin
EnableDisableSMI2,
genEquipInterfacesSdhSSMPattern
INTEGER,
genEquipInterfacesSdhTraceIdAdmin
EnableDisableSMI2,
genEquipInterfacesSdhVCSignalLabel
INTEGER,
genEquipInterfacesSdhVcRdiAdmin
EnableDisableSMI2
}
genEquipInterfacesSdhMuteTx OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mute Tx option on the interface."
::= { genEquipInterfacesSdhEntry 1 }
genEquipInterfacesSdhClockSource OBJECT-TYPE
SYNTAX INTEGER {
internal-clock(0),
loop(1),
synchronization-vc(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The source of the clock being used.
sync-vc option is for future support, to use one of the outgoing TDM VCs as a source."
::= { genEquipInterfacesSdhEntry 2 }
genEquipInterfacesSdhAISAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable, Disable AIS signaling at the V5 byte on the STM-1, OC-3 interface."
::= { genEquipInterfacesSdhEntry 3 }
genEquipInterfacesSdhTraceIdReceived OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"J0 Trace Identifier signal that was received on the interface."
::= { genEquipInterfacesSdhEntry 4 }
genEquipInterfacesSdhTraceIdTransmitted OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"J0 Trace Identifier signal that is transmitted on the interface."
::= { genEquipInterfacesSdhEntry 5 }
genEquipInterfacesSdhTraceIdExpected OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"J0 Trace Identifier signal that is expected to be received on the interface."
::= { genEquipInterfacesSdhEntry 6 }
genEquipInterfacesSdhTraceIdStringLength OBJECT-TYPE
SYNTAX INTEGER {
len1(0),
len15(1),
len62(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trace identifier string length. Lengths 0 and 15 are valid for SDH systems. Length 62 is additionally available in SONET systems."
::= { genEquipInterfacesSdhEntry 7 }
genEquipInterfacesSdhExcessiveBer OBJECT-TYPE
SYNTAX INTEGER { n1e-3(0), n1e-4(1), n1e-5(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Excessive BER threshold on the interface."
::= { genEquipInterfacesSdhEntry 8 }
genEquipInterfacesSdhSignalDegrade OBJECT-TYPE
SYNTAX INTEGER { n1e-6(3), n1e-7(4), n1e-8(5), n1e-9(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Signal degrade threshold on the interface."
::= { genEquipInterfacesSdhEntry 9 }
genEquipInterfacesSdhLoopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
loopback-towards-system(1),
loopback-towards-line(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SDH Loopback."
::= { genEquipInterfacesSdhEntry 10 }
genEquipInterfacesSdhClockSourceStatus OBJECT-TYPE
SYNTAX INTEGER {
internal-clock(0),
loop(1),
synchronization-vc(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual source of the clock for the outgoing STM-1/OC-3 signal.
It may differ from the desired source if the source signal is missing or corrupt"
::= { genEquipInterfacesSdhEntry 11 }
genEquipInterfacesSdhLineTxProtectionMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
uni-directional-MSP(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this parameter configures the behavior of the transmitting line in a 1+1 HSB configuration.
In normal mode the stand-by signal is silenced. In uni-directional MSP both units will transmit"
::= { genEquipInterfacesSdhEntry 12 }
genEquipInterfacesSdhSyncVC OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The outgoing VC signal to be taken as the STM-1/OC-3 synchronization source if
genEquipInterfacesSdhClockSource is set to synchronization-vc"
::= { genEquipInterfacesSdhEntry 13 }
genEquipInterfacesSdhAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administrative status of the STM-1/OC3 port"
::= { genEquipInterfacesSdhEntry 14 }
genEquipInterfacesSdhPdhTimingMode OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock reference for outgoing PDH signals configured in 'absolute clock' mode"
::= { genEquipInterfacesSdhEntry 15 }
genEquipInterfacesSdhSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot ID"
::= { genEquipInterfacesSdhEntry 16 }
genEquipInterfacesSdhIdleCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value to be transmitted at PDH signals inside the STM-1/OC3 when there is no data to transmit"
::= { genEquipInterfacesSdhEntry 17 }
genEquipInterfacesSdhSSMAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SSM support admin for this interface"
::= { genEquipInterfacesSdhEntry 18 }
genEquipInterfacesSdhSSMPattern OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the default SSM pattern to be transmitted in case if TCC clock synchronization subsystem doesn't provide SSM pattern value"
::= { genEquipInterfacesSdhEntry 19 }
genEquipInterfacesSdhTraceIdAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable of J0 mismatch checking on RX direction"
::= { genEquipInterfacesSdhEntry 20 }
genEquipInterfacesSdhVCSignalLabel OBJECT-TYPE
SYNTAX INTEGER {
asynchronous(0),
non-specific-payload(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the signal label bits to be sent and expected in every VC-11/12;
use non-specific payload only for backwards compatibility with old equipment"
::= { genEquipInterfacesSdhEntry 21 }
genEquipInterfacesSdhVcRdiAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VC-RDI signaling admin status"
::= { genEquipInterfacesSdhEntry 22 }
-- LPVC (Low Oreder Path VC)
genEquipInterfacesSdhLpVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesSdhLpVcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. "
::= { genEquipInterfacesSdh 2 }
genEquipInterfacesSdhLpVcEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesSdhLpVcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table includes properties for each Low-order path VC (VC-11/12) in the SDH interface. "
INDEX { ifIndex, genEquipInterfacesSdhLpVcId }
::= { genEquipInterfacesSdhLpVcTable 1 }
GenEquipInterfacesSdhLpVcEntry ::=
SEQUENCE {
genEquipInterfacesSdhLpVcId
INTEGER,
genEquipInterfacesSdhLpVcAIS
INTEGER
}
genEquipInterfacesSdhLpVcId OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VC-11 or VC-12 number; VCs are numbered according to standard KLM order. "
::= { genEquipInterfacesSdhLpVcEntry 1 }
genEquipInterfacesSdhLpVcAIS OBJECT-TYPE
SYNTAX INTEGER {
aisDetected(0),
aisNotDetected(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether incoming AIS is currently detected in the VC's payload. 0 indicates that AIS is detected, 1 that is not detected."
::= { genEquipInterfacesSdhLpVcEntry 2 }
-- TDM pw-stm1oc3-status-table
genEquipInterfacesSdhStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesSdhStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SDH Status. "
::= { genEquipInterfacesSdh 3 }
genEquipInterfacesSdhStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesSdhStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SDH Status"
INDEX { genEquipInterfacesSdhStatusIfIndex }
::= { genEquipInterfacesSdhStatusTable 1 }
GenEquipInterfacesSdhStatusEntry ::=
SEQUENCE {
genEquipInterfacesSdhStatusIfIndex
INTEGER,
genEquipInterfacesSdhStatusLine
INTEGER,
genEquipInterfacesSdhStatusOperState
DownUp,
genEquipInterfacesSdhStatusRegenerator
INTEGER,
genEquipInterfacesSdhStatusClockSourceStatus
PWPDHClockSource,
genEquipInterfacesSdhStatusPdhClockStatus
PWPDHClockSource,
genEquipInterfacesSdhStatusSlotId
INTEGER,
genEquipInterfacesSdhStatusLoopback
INTEGER,
genEquipInterfacesSdhStatusMultiplexer
INTEGER,
genEquipInterfacesSdhStatusSsmRx
INTEGER,
genEquipInterfacesSdhStatusSsmTx
INTEGER
}
genEquipInterfacesSdhStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Portnumber"
::= { genEquipInterfacesSdhStatusEntry 1 }
genEquipInterfacesSdhStatusLine OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)"
::= { genEquipInterfacesSdhStatusEntry 2 }
genEquipInterfacesSdhStatusOperState OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface operational status"
::= { genEquipInterfacesSdhStatusEntry 3 }
genEquipInterfacesSdhStatusRegenerator OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmap field according to the following values: no-defect (1), AIS (2), RDI (4)"
::= { genEquipInterfacesSdhStatusEntry 4 }
genEquipInterfacesSdhStatusClockSourceStatus OBJECT-TYPE
SYNTAX PWPDHClockSource
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual source of the clock for the outgoing STM-1/OC-3 signal.
It may differ from the desired source if the source signal is missing or corrupt"
::= { genEquipInterfacesSdhStatusEntry 5 }
genEquipInterfacesSdhStatusPdhClockStatus OBJECT-TYPE
SYNTAX PWPDHClockSource
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PDH clock source status"
::= { genEquipInterfacesSdhStatusEntry 6 }
genEquipInterfacesSdhStatusSlotId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot ID"
::= { genEquipInterfacesSdhStatusEntry 7 }
genEquipInterfacesSdhStatusLoopback OBJECT-TYPE
SYNTAX INTEGER {
off(0),
towards-system(1),
towards-line(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the loopback for the SONET/SDH interface"
::= { genEquipInterfacesSdhStatusEntry 8 }
genEquipInterfacesSdhStatusMultiplexer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bitmask: no-defect (1), STS-LOP(2), STS-AIS(4), STS-RDI(8), unequipped (16), label-mismatch (32)"
::= { genEquipInterfacesSdhStatusEntry 9 }
genEquipInterfacesSdhStatusSsmRx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the currently received SSM bits "
::= { genEquipInterfacesSdhStatusEntry 10 }
genEquipInterfacesSdhStatusSsmTx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the currently transmitted SSM bits "
::= { genEquipInterfacesSdhStatusEntry 11 }
--
-- TDM pw-stm1oc3-loopback-status-table
genEquipInterfacesSdhLoopbackStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesSdhLoopbackStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SONET/SDH interface loopback status"
::= { genEquipInterfacesSdh 4 }
genEquipInterfacesSdhLoopbackStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesSdhLoopbackStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"SONET/SDH interface loopback status entry"
INDEX { genEquipInterfacesSdhLoopbackStatusIfIndex }
::= { genEquipInterfacesSdhLoopbackStatusTable 1 }
GenEquipInterfacesSdhLoopbackStatusEntry ::=
SEQUENCE {
genEquipInterfacesSdhLoopbackStatusIfIndex
INTEGER,
genEquipInterfacesSdhLoopbackStatusSlotId
INTEGER,
genEquipInterfacesSdhLoopbackStatusType
INTEGER,
genEquipInterfacesSdhLoopbackStatusCounter
INTEGER
}
genEquipInterfacesSdhLoopbackStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Portnumber"
::= { genEquipInterfacesSdhLoopbackStatusEntry 1 }
genEquipInterfacesSdhLoopbackStatusSlotId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot ID"
::= { genEquipInterfacesSdhLoopbackStatusEntry 2 }
genEquipInterfacesSdhLoopbackStatusType OBJECT-TYPE
SYNTAX INTEGER {
off(0),
towards-system(1),
towards-line(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interface operational status"
::= { genEquipInterfacesSdhLoopbackStatusEntry 3 }
genEquipInterfacesSdhLoopbackStatusCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current value of STM1/OC3 interface Looback Timeout Counter"
::= { genEquipInterfacesSdhLoopbackStatusEntry 4 }
-- Interfaces AIS
genEquipInterfacesAIS OBJECT IDENTIFIER ::= {genEquipInterfaces 5}
genEquipInterfacesAISAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control AIS Detection over all E1/T1/SDH ports."
::= { genEquipInterfacesAIS 1 }
-- Automatic State Propagation
genEquipInterfacesASP OBJECT IDENTIFIER ::= {genEquipInterfaces 6}
genEquipInterfacesASPAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls the Automatic State Propagation"
::= { genEquipInterfacesASP 1 }
genEquipInterfacesASPLocalLOC OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables fault propagation upon detection of local LOC.
This configuration is relevant only for non-protected single-pipe switch mode only."
::= { genEquipInterfacesASP 2 }
genEquipInterfacesASPLocalExcessiveBER OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables fault propagation to the Ethernet interface upon detection of radio excessive BER.
This configuration is relevant only for non-protected single-pipe switch mode only."
::= { genEquipInterfacesASP 3 }
genEquipInterfacesASPACMthreshold OBJECT-TYPE
SYNTAX INTEGER {
profile-0(0),
profile-1(1),
profile-2(2),
profile-3(3),
profile-4(4),
profile-5(5),
profile-6(6),
profile-7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the propagation when Radio ACM profile degrades below a defined profile.
This configuration is relevant only for non-protected single-pipe switch mode only when ACM
radio script is running."
::= { genEquipInterfacesASP 4 }
genEquipInterfacesASPRemoteFault OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter enables/disables automatic state propagation.
The following remote faults are propagated to the NE by default:
- Radio LOF
- Radio link ID mismatch
- Ethernet line LOC
any other remote faults are propagated to the NE only if they are
enabled at the local NE"
::= { genEquipInterfacesASP 5 }
-- NG ASP
genEquipInterfacesNGASP OBJECT IDENTIFIER ::= {genEquipInterfacesASP 7}
--
-- Automatic state propagation configuration table - asp-config-table
--
genEquipInterfacesNGASPConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGASPConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table configures automatic state propagation functionality."
::= { genEquipInterfacesNGASP 1 }
genEquipInterfacesNGASPConfigEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGASPConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table configures automatic state propagation functionality entry."
INDEX { genEquipInterfacesNGASPConfigControlledInterfaceIfindex }
::= { genEquipInterfacesNGASPConfigTable 1 }
GenEquipInterfacesNGASPConfigEntry ::=
SEQUENCE {
genEquipInterfacesNGASPConfigControlledInterfaceIfindex
INTEGER,
genEquipInterfacesNGASPConfigAdmin
EnableDisable,
genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex
INTEGER,
genEquipInterfacesNGASPConfigAcmThreshold
INTEGER,
genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigRadioLofCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin
EnableDisable,
genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin
EnableDisable,
genEquipInterfacesNGASPConfigMonitoredInterface56
INTEGER,
genEquipInterfacesNGASPConfigCsfModeAdmin
EnableDisable,
genEquipInterfacesNGASPConfigMonitoredInterface
INTEGER,
genEquipInterfacesNGASPConfigDelayTime
INTEGER,
genEquipInterfacesNGASPConfigRowStatus
RowStatus
}
genEquipInterfacesNGASPConfigControlledInterfaceIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of the controlled interface.
This interface will be disabled upon initiation of auto state propagation"
::= { genEquipInterfacesNGASPConfigEntry 1 }
genEquipInterfacesNGASPConfigAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/disables automatic state propagation."
::= { genEquipInterfacesNGASPConfigEntry 2 }
genEquipInterfacesNGASPConfigMonitoredInterfaceIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index to the monitored interface.
Auto state propagation will act upon detecting a failure indication on this interface."
::= { genEquipInterfacesNGASPConfigEntry 3 }
genEquipInterfacesNGASPConfigAcmThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ACM profile threshold for initiating auto state propagation."
::= { genEquipInterfacesNGASPConfigEntry 4 }
genEquipInterfacesNGASPConfigRadioExcessiveBerCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon local radio excessive BER."
::= { genEquipInterfacesNGASPConfigEntry 5 }
genEquipInterfacesNGASPConfigLinkIdMismatchCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon local radio link Id mismatch."
::= { genEquipInterfacesNGASPConfigEntry 6 }
genEquipInterfacesNGASPConfigRadioLofCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon local radio LOF."
::= { genEquipInterfacesNGASPConfigEntry 7 }
genEquipInterfacesNGASPConfigRemoteRadioLofCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon remote radio LOF."
::= { genEquipInterfacesNGASPConfigEntry 8 }
genEquipInterfacesNGASPConfigRxAcmThresholdCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon radio ACM RX profile below threshold."
::= { genEquipInterfacesNGASPConfigEntry 9 }
genEquipInterfacesNGASPConfigTxAcmThresholdCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon radio ACM TX profile below threshold."
::= { genEquipInterfacesNGASPConfigEntry 10 }
genEquipInterfacesNGASPConfigRemoteEthLocCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation due to remote ethernet LOC."
::= { genEquipInterfacesNGASPConfigEntry 11 }
genEquipInterfacesNGASPConfigRemoteFaultTriggerAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Auto state propagation trigger by remote fault."
::= { genEquipInterfacesNGASPConfigEntry 12 }
genEquipInterfacesNGASPConfigRemoteRadioExcessiveBerCriterionAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate auto state propagation upon remote radio excessive BER."
::= { genEquipInterfacesNGASPConfigEntry 13 }
genEquipInterfacesNGASPConfigMonitoredInterface56 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface."
::= { genEquipInterfacesNGASPConfigEntry 14 }
genEquipInterfacesNGASPConfigCsfModeAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This mode upon failure sends CSF OAM packet instead of shuting down port."
::= { genEquipInterfacesNGASPConfigEntry 15 }
genEquipInterfacesNGASPConfigMonitoredInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index to the monitored interface. Auto state propagation will act upon detecting a failure indication on this interface."
::= { genEquipInterfacesNGASPConfigEntry 16 }
genEquipInterfacesNGASPConfigDelayTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Debounce time for ASP (in milliseconds)"
::= { genEquipInterfacesNGASPConfigEntry 17 }
genEquipInterfacesNGASPConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status to allow user add entries dynamically."
::= { genEquipInterfacesNGASPConfigEntry 30 }
-- PW T-card
genEquipInterfacesPW OBJECT IDENTIFIER ::= {genEquipInterfaces 7}
genEquipInterfacesPWCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesPWCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PW-Card configuration table. using the table to configure the system PW-T features."
::= { genEquipInterfacesPW 1 }
genEquipInterfacesPWCardEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesPWCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"PW-Card configuration table. using the table to configure the system PW-T features."
INDEX { genEquipInterfacesPWCardSlotNumber }
::= { genEquipInterfacesPWCardTable 1 }
GenEquipInterfacesPWCardEntry ::=
SEQUENCE {
genEquipInterfacesPWCardSlotNumber
INTEGER,
genEquipInterfacesPWCardExportClkSysRef
INTEGER,
genEquipInterfacesPWCardExportClkFrontPannel
INTEGER,
genEquipInterfacesPWCardExportClkSysRefCrPort
INTEGER,
genEquipInterfacesPWCardExportClkFrontPanelCrPort
INTEGER,
genEquipInterfacesPWCardFrontPanelClockSignalInput
INTEGER,
genEquipInterfacesPWCardFrontPanelClockSignalOutp
INTEGER,
genEquipInterfacesPWCardIpAddrUdpIpTraffic
IpAddress,
genEquipInterfacesPWCardIpSubnetUdpIpTraffic
IpAddress,
genEquipInterfacesPWCardClkRecoveryMode
INTEGER,
genEquipInterfacesPWCardDifferentialClkFrequency
INTEGER,
genEquipInterfacesPWCardDifferentialClkSource
INTEGER
}
genEquipInterfacesPWCardSlotNumber OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Slot number where the relevant PW card is inserted."
::= { genEquipInterfacesPWCardEntry 1 }
genEquipInterfacesPWCardExportClkSysRef OBJECT-TYPE
SYNTAX INTEGER {
none(0),
frontPanel(1),
clockRecovery(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Which card clock to provide as source towards system reference clock;
FrontPanel takes the clock inserted into the front panel interface;
ClockRecovery takes the clock recovered from the PW service mapped to the TDM port defined in ExportClkSysRefCrPort."
::= { genEquipInterfacesPWCardEntry 2 }
genEquipInterfacesPWCardExportClkFrontPannel OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sysRefClk(1),
clockRecovery(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Which clock to export to the front panel clock; SysRefClk exports the system reference clock;
ClockRecovery exports the clock recovered from the PW service mapped to the TDM port defined in ExportClkFrontPanelCrPort."
::= { genEquipInterfacesPWCardEntry 3 }
genEquipInterfacesPWCardExportClkSysRefCrPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port serving as clock recovery reference if ExportClkSysRef is set to ClockRecovery."
::= { genEquipInterfacesPWCardEntry 4 }
genEquipInterfacesPWCardExportClkFrontPanelCrPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port serving as clock recovery reference if ExportClkFrontPannel is set to ClockRecovery."
::= { genEquipInterfacesPWCardEntry 5 }
genEquipInterfacesPWCardFrontPanelClockSignalInput OBJECT-TYPE
SYNTAX INTEGER {
sync(0),
e1t1(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the type of input clock signal of the front panel port.
Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal."
::= { genEquipInterfacesPWCardEntry 6 }
genEquipInterfacesPWCardFrontPanelClockSignalOutp OBJECT-TYPE
SYNTAX INTEGER {
sync(0),
e1t1(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configure the type of output clock signal of the front panel port.
Sync is 2.048MHz/1.544MHz (differential sine/square 3.3V); e1t1 is a G.823/G.824 signal."
::= { genEquipInterfacesPWCardEntry 7 }
genEquipInterfacesPWCardIpAddrUdpIpTraffic OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Address for UDP/IP encapsulated PWs."
::= { genEquipInterfacesPWCardEntry 8 }
genEquipInterfacesPWCardIpSubnetUdpIpTraffic OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Subnet for UDP/IP encapsulated PWs."
::= { genEquipInterfacesPWCardEntry 9 }
genEquipInterfacesPWCardClkRecoveryMode OBJECT-TYPE
SYNTAX INTEGER {
adaptive(0),
differential(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock recovery mode for the card."
::= { genEquipInterfacesPWCardEntry 10 }
genEquipInterfacesPWCardDifferentialClkFrequency OBJECT-TYPE
SYNTAX INTEGER {
none(0),
n25MHz(1),
n125MHz(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Frequency for differential clock (none for adaptive)."
::= { genEquipInterfacesPWCardEntry 11 }
genEquipInterfacesPWCardDifferentialClkSource OBJECT-TYPE
SYNTAX INTEGER {
none (0),
sysReference(2),
frontPanel(3),
n1588(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reference clock source for differential clock recovery (none for adaptive)."
::= { genEquipInterfacesPWCardEntry 12 }
-- PW t-card TDM ports table
genEquipInterfacesServicesPWTDMPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesServicesPWTDMPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of the 16 internal E1/DS1 ports."
::= { genEquipInterfacesPW 2 }
genEquipInterfacesServicesPWTDMPortsEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesServicesPWTDMPortsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of the 16 internal E1/DS1 ports."
INDEX { ifIndex }
::= { genEquipInterfacesServicesPWTDMPortsTable 1 }
GenEquipInterfacesServicesPWTDMPortsEntry ::=
SEQUENCE {
genEquipInterfacesServicesPWTDMPortsLineType
INTEGER,
genEquipInterfacesServicesPWTDMPortsLineCoding
INTEGER,
genEquipInterfacesServicesPWTDMPortsAssigned
NoYes,
genEquipInterfacesServicesPWTDMPortsChannelization
EnableDisable,
genEquipInterfacesServicesPWTDMPortsTimingMode
INTEGER,
genEquipInterfacesServicesPWTDMPortsClockSourceRef
INTEGER,
genEquipInterfacesServicesPWTDMPortsClkSrcRefPort
INTEGER,
genEquipInterfacesServicesPWTDMPortsClkSrcPWId
INTEGER,
genEquipInterfacesServicesPWTDMPortsLoopback
INTEGER,
genEquipInterfacesServicesPWTDMPortsTimeout
INTEGER,
genEquipInterfacesServicesPWTDMPortsIdleCode
INTEGER,
genEquipInterfacesServicesPWTDMPortsCounter
INTEGER,
genEquipInterfacesServicesPWTDMPortsLineStatus
INTEGER
}
genEquipInterfacesServicesPWTDMPortsLineType OBJECT-TYPE
SYNTAX INTEGER {
e1Unframed(0),
e1(1),
e1Crc(2),
e1Mf(3),
e1MfCrc(4),
ds1Uxnframed(5),
ds1Sf(6),
ds1Esf(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Line type of this TDM port. E1 types are for E1 systems and DS1 types for DS1 systems."
::= { genEquipInterfacesServicesPWTDMPortsEntry 1 }
genEquipInterfacesServicesPWTDMPortsLineCoding OBJECT-TYPE
SYNTAX NoYes
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Line coding for this port. The value hdb3-b8zs means b8zs for T1 and hdb3 for E1.
Ami is only for T1."
::= { genEquipInterfacesServicesPWTDMPortsEntry 2 }
genEquipInterfacesServicesPWTDMPortsAssigned OBJECT-TYPE
SYNTAX NoYes
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indication whether this port is currently assigned to a TDM trail."
::= { genEquipInterfacesServicesPWTDMPortsEntry 3 }
genEquipInterfacesServicesPWTDMPortsChannelization OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TIndication whether this TDM port is channelized into DS0s."
::= { genEquipInterfacesServicesPWTDMPortsEntry 4 }
genEquipInterfacesServicesPWTDMPortsTimingMode OBJECT-TYPE
SYNTAX INTEGER {
loop(0),
absolute(1),
clockRecovery(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transmission towards TDM timing mode.
Loop means transmitting with the received clock from TDM signal.
Absolute means transmitting with the clock selected by ClockSourceRef.
ClockRecovery means adaptive clock recovery mode."
::= { genEquipInterfacesServicesPWTDMPortsEntry 5 }
genEquipInterfacesServicesPWTDMPortsClockSourceRef OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sysRefClk(1),
frontPanel(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock source reference for Absolute clock mode.
'none' for loop or clock-recovery timing modes."
::= { genEquipInterfacesServicesPWTDMPortsEntry 6 }
genEquipInterfacesServicesPWTDMPortsClkSrcRefPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port serving as a clock reference for loop or clock-recovery timing modes"
::= { genEquipInterfacesServicesPWTDMPortsEntry 7 }
genEquipInterfacesServicesPWTDMPortsClkSrcPWId OBJECT-TYPE
SYNTAX INTEGER (0..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PW ID (as defined in genEquipServicesPWServicePWId) from which clock will be derived
for this port when TimingMode is ClockRecovery."
::= { genEquipInterfacesServicesPWTDMPortsEntry 8 }
genEquipInterfacesServicesPWTDMPortsLoopback OBJECT-TYPE
SYNTAX INTEGER {
off(1),
towardsLine(2),
towardsSystem(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or Disable line loopback on the E1/T1 interface."
::= { genEquipInterfacesServicesPWTDMPortsEntry 9 }
genEquipInterfacesServicesPWTDMPortsTimeout OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Line loopback timeout, in minutes. 0 means no timer."
::= { genEquipInterfacesServicesPWTDMPortsEntry 10 }
genEquipInterfacesServicesPWTDMPortsIdleCode OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Value to be transmitted on this TDM port in unused timeslots."
::= { genEquipInterfacesServicesPWTDMPortsEntry 11 }
genEquipInterfacesServicesPWTDMPortsCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loopback time left (in seconds)."
::= { genEquipInterfacesServicesPWTDMPortsEntry 12 }
genEquipInterfacesServicesPWTDMPortsLineStatus OBJECT-TYPE
SYNTAX INTEGER {
noAlarm(0),
rxLof(1),
txLof(2),
rxAis(3),
txAis(4),
ts16RxLomf(5),
ts16TxLomf(6),
loopbackAlarm(7),
otherFailure(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line status of this TDM port."
::= { genEquipInterfacesServicesPWTDMPortsEntry 13 }
--
-- NG PW Interfaces
--
genEquipInterfacesNGPW OBJECT IDENTIFIER ::= {genEquipInterfacesPW 3}
--
-- PW-LIC card configuration table - pw-card-configuration-table
--
genEquipInterfacesNGPWCardTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of PW-LIC card level parameters."
::= { genEquipInterfacesNGPW 1 }
genEquipInterfacesNGPWCardEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGPWCardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of PW-LIC card level parameters."
INDEX { genEquipInterfacesNGPWCardSlotID }
::= { genEquipInterfacesNGPWCardTable 1 }
GenEquipInterfacesNGPWCardEntry ::=
SEQUENCE {
genEquipInterfacesNGPWCardSlotID
INTEGER,
genEquipInterfacesNGPWCardExportClkSysRef
PWCclockSysRef,
genEquipInterfacesNGPWCardExportClkSysRefCrPort
INTEGER,
genEquipInterfacesNGPWCardIPAddress
IpAddress,
genEquipInterfacesNGPWCardIPSubnetMask
IpAddress,
genEquipInterfacesNGPWCardClkRecoveryMode
INTEGER,
genEquipInterfacesNGPWCardDifferentialClkSource
PWCDiffClockSrc,
genEquipInterfacesNGPWCardClockFreq
INTEGER,
genEquipInterfacesNGPWCardTDMType
INTEGER,
genEquipInterfacesNGPWCardLoopbackTimeout
INTEGER
}
genEquipInterfacesNGPWCardSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipInterfacesNGPWCardEntry 1 }
genEquipInterfacesNGPWCardExportClkSysRef OBJECT-TYPE
SYNTAX PWCclockSysRef
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures which clock the PW-LIC exports towards the system."
::= { genEquipInterfacesNGPWCardEntry 2 }
genEquipInterfacesNGPWCardExportClkSysRefCrPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port serving as clock recovery reference towards the system."
::= { genEquipInterfacesNGPWCardEntry 3 }
genEquipInterfacesNGPWCardIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP Address for UDP/IP and MPLS encapsulations."
::= { genEquipInterfacesNGPWCardEntry 4 }
genEquipInterfacesNGPWCardIPSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP subnet mask for UDP/IP and MPLS encapsulations."
::= { genEquipInterfacesNGPWCardEntry 5 }
genEquipInterfacesNGPWCardClkRecoveryMode OBJECT-TYPE
SYNTAX INTEGER {
adaptive(0),
differential(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the card either in ACR or differential clock recovery mode."
::= { genEquipInterfacesNGPWCardEntry 6 }
genEquipInterfacesNGPWCardDifferentialClkSource OBJECT-TYPE
SYNTAX PWCDiffClockSrc
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Reference clock source for differential clock recovery (none for adaptive)."
::= { genEquipInterfacesNGPWCardEntry 7 }
genEquipInterfacesNGPWCardClockFreq OBJECT-TYPE
SYNTAX INTEGER {
none(0),
fr-25(1),
fr-125(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Frequency for differential clock (none for adaptive)."
::= { genEquipInterfacesNGPWCardEntry 8 }
genEquipInterfacesNGPWCardTDMType OBJECT-TYPE
SYNTAX INTEGER {
e1(0),
ds1(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of TDM interfaces (E1, DS1)."
::= { genEquipInterfacesNGPWCardEntry 9 }
genEquipInterfacesNGPWCardLoopbackTimeout OBJECT-TYPE
SYNTAX INTEGER (0..1440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Timeout for TDM ports loopback."
::= { genEquipInterfacesNGPWCardEntry 10 }
-- pwe3-pwc-fp-clock-configuration-table
genEquipInterfacesNGPWClockInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of the front panel clock interface in the PW-LIC."
::= { genEquipInterfacesNGPW 3 }
genEquipInterfacesNGPWClockInterfaceEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGPWClockInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry allows configuration of the front panel clock interface in the PW-LIC."
INDEX { genEquipInterfacesNGPWClockInterfaceSlotID }
::= { genEquipInterfacesNGPWClockInterfaceTable 1 }
GenEquipInterfacesNGPWClockInterfaceEntry ::=
SEQUENCE {
genEquipInterfacesNGPWClockInterfaceSlotID
INTEGER,
genEquipInterfacesNGPWClockInterfaceIfIndex
INTEGER,
genEquipInterfacesNGPWClockInterfaceAdminRx
EnableDisableSMI2,
genEquipInterfacesNGPWClockInterfaceAdminTx
EnableDisableSMI2,
genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel
INTEGER,
genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort
INTEGER,
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput
PWfpClockSignal,
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput
PWfpClockSignal,
genEquipInterfacesNGPWClockInterfaceSSMAdmin
EnableDisableSMI2,
genEquipInterfacesNGPWClockInterfaceSSMBit
INTEGER,
genEquipInterfacesNGPWClockInterfaceSSMTxDefault
INTEGER
}
genEquipInterfacesNGPWClockInterfaceSlotID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipInterfacesNGPWClockInterfaceEntry 1 }
genEquipInterfacesNGPWClockInterfaceIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interface IfIndex."
::= { genEquipInterfacesNGPWClockInterfaceEntry 2 }
genEquipInterfacesNGPWClockInterfaceAdminRx OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Clock interface administrative state."
::= { genEquipInterfacesNGPWClockInterfaceEntry 3 }
genEquipInterfacesNGPWClockInterfaceAdminTx OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock interface administrative state."
::= { genEquipInterfacesNGPWClockInterfaceEntry 4 }
genEquipInterfacesNGPWClockInterfaceExportClkFrontPannel OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sysRef(1),
clockRecovery(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Configures which signal the PW-LIC exports to the front panel clock interface."
::= { genEquipInterfacesNGPWClockInterfaceEntry 5 }
genEquipInterfacesNGPWClockInterfaceExportClkFrontPanelCrPort OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TDM port serving as clock recovery reference for front panel interface."
::= { genEquipInterfacesNGPWClockInterfaceEntry 6 }
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalInput OBJECT-TYPE
SYNTAX PWfpClockSignal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Expected input signal type: E1 or differential sine/square 3.3V 2MHz"
::= { genEquipInterfacesNGPWClockInterfaceEntry 7 }
genEquipInterfacesNGPWClockInterfaceFrontPanelClockSignalOutput OBJECT-TYPE
SYNTAX PWfpClockSignal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Output signal type: E1 or differential sine/square 3.3V 2MH."
::= { genEquipInterfacesNGPWClockInterfaceEntry 8 }
genEquipInterfacesNGPWClockInterfaceSSMAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable SSM sending in this interface."
::= { genEquipInterfacesNGPWClockInterfaceEntry 9 }
genEquipInterfacesNGPWClockInterfaceSSMBit OBJECT-TYPE
SYNTAX INTEGER (4..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Determines which bit in the frame."
::= { genEquipInterfacesNGPWClockInterfaceEntry 10 }
genEquipInterfacesNGPWClockInterfaceSSMTxDefault OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"..."
::= { genEquipInterfacesNGPWClockInterfaceEntry 11 }
-- pw-clock-interface-status-table
genEquipInterfacesNGPWClockInterfaceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWClockInterfaceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about current state of the clock interface in the PW-LIC."
::= { genEquipInterfacesNGPW 4 }
genEquipInterfacesNGPWClockInterfaceStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGPWClockInterfaceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry contains information about current state of the clock interface in the PW-LIC."
INDEX { genEquipInterfacesNGPWClockInterfaceStatusSlotID }
::= { genEquipInterfacesNGPWClockInterfaceStatusTable 1 }
GenEquipInterfacesNGPWClockInterfaceStatusEntry ::=
SEQUENCE {
genEquipInterfacesNGPWClockInterfaceStatusSlotID
INTEGER,
genEquipInterfacesNGPWClockInterfaceStatusIfIndex
INTEGER,
genEquipInterfacesNGPWClockInterfaceStatusOperationalState
DownUp,
genEquipInterfacesNGPWClockInterfaceStatusSSMTx
INTEGER,
genEquipInterfacesNGPWClockInterfaceStatusSSMRx
INTEGER
}
genEquipInterfacesNGPWClockInterfaceStatusSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 1 }
genEquipInterfacesNGPWClockInterfaceStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface IfIndex."
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 2 }
genEquipInterfacesNGPWClockInterfaceStatusOperationalState OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Clock interface operational state."
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 3 }
genEquipInterfacesNGPWClockInterfaceStatusSSMTx OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Currently transmitted SSM bits."
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 4 }
genEquipInterfacesNGPWClockInterfaceStatusSSMRx OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Currently received SSM bits."
::= { genEquipInterfacesNGPWClockInterfaceStatusEntry 5 }
-- pw-eth-port-configuration-table
genEquipInterfacesNGPWEthInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows enabling/disabling the PW-LIC internal Ethernet port."
::= { genEquipInterfacesNGPW 5 }
genEquipInterfacesNGPWEthInterfaceEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGPWEthInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows enabling/disabling the PW-LIC internal Ethernet port."
INDEX { genEquipInterfacesNGPWEthInterfaceSlotID }
::= { genEquipInterfacesNGPWEthInterfaceTable 1 }
GenEquipInterfacesNGPWEthInterfaceEntry ::=
SEQUENCE {
genEquipInterfacesNGPWEthInterfaceSlotID
INTEGER,
genEquipInterfacesNGPWEthInterfaceIfIndex
INTEGER
}
genEquipInterfacesNGPWEthInterfaceSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipInterfacesNGPWEthInterfaceEntry 1 }
genEquipInterfacesNGPWEthInterfaceIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface IfIndex."
::= { genEquipInterfacesNGPWEthInterfaceEntry 2 }
-- pw-eth-port-status-table
genEquipInterfacesNGPWEthInterfaceStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWEthInterfaceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains status and RMON statistics of the internal PW-LIC Ethernet port."
::= { genEquipInterfacesNGPW 6 }
genEquipInterfacesNGPWEthInterfaceStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGPWEthInterfaceStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table enatry contains status and RMON statistics of the internal PW-LIC Ethernet port."
INDEX { genEquipInterfacesNGPWEthInterfaceStatusIfIndex }
::= { genEquipInterfacesNGPWEthInterfaceStatusTable 1 }
GenEquipInterfacesNGPWEthInterfaceStatusEntry ::=
SEQUENCE {
genEquipInterfacesNGPWEthInterfaceStatusIfIndex
INTEGER,
genEquipInterfacesNGPWEthInterfaceStatusMACAddress
OCTET STRING,
genEquipInterfacesNGPWEthInterfaceStatusClearStats
NoYes,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxBytes
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxPackets
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxMulticast
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxMacControl
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxMacPause
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrCode
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxUndersize
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxOversize
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxFragments
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxJabber
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxDropped
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxBytes
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxPackets
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxMulticast
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxMacPause
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxDefer
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxDropped
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxJabber
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxControl
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxOversize
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxUndersize
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxFragments
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrMru
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun
Counter64,
genEquipInterfacesNGPWEthInterfaceStatusSlotID
INTEGER
}
genEquipInterfacesNGPWEthInterfaceStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface IfIndex."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 2 }
genEquipInterfacesNGPWEthInterfaceStatusMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"MAC Address to be used in Ethernet and UDP/IP PSN packets"
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 3 }
genEquipInterfacesNGPWEthInterfaceStatusClearStats OBJECT-TYPE
SYNTAX NoYes
ACCESS write-only
STATUS mandatory
DESCRIPTION
"Clears internal Ethernet port RMON counters"
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 4 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames64 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 64 bytes in length inclusive"
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 5 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames127 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 65 to 127 bytes in length inclusive."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 6 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames255 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 128 to 255 bytes in length inclusive."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 7 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames511 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 256 to 511 bytes in length inclusive."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 8 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1023 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 512 to 1023 bytes in length inclusive."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 9 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1518 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1024 to 1518 bytes in length inclusive."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 10 }
genEquipInterfacesNGPWEthInterfaceStatusTxRxFrames1522 OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of good or bad frames transmitted and received that are 1519 to 1522 bytes in length inclusive."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 11 }
genEquipInterfacesNGPWEthInterfaceStatusRxBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of byte count of frames received with 0 to 1518 bytes, including those in bad packets."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 12 }
genEquipInterfacesNGPWEthInterfaceStatusRxPackets OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of received packets (including bad packets, all Unicast, Broadcast, and Multicast packets)."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 13 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrFcs OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames received that have a integral 64 to 1518 byte length and contain a Frame Check Sequence error.."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 14 }
genEquipInterfacesNGPWEthInterfaceStatusRxMulticast OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of multicast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 15 }
genEquipInterfacesNGPWEthInterfaceStatusRxBroadcast OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of broadcast good frames of length 64 to1518 (non VLAN) or 1522 (VLAN) bytes excluding Broadcast frames."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 16 }
genEquipInterfacesNGPWEthInterfaceStatusRxMacControl OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of MAC Control frames received (PAUSE &Unsupported)."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 17 }
genEquipInterfacesNGPWEthInterfaceStatusRxMacPause OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames received."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 18 }
genEquipInterfacesNGPWEthInterfaceStatusRxMacUnknown OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of MAC Control Frames received that contain an opcode other than a PAUSE."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 19 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrCode OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of instances where a valid carrier was present and at least one invalid data symbol was detected."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 20 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrFalseCarrier OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of false carriers detected during idle, as defined by a 1 on RX_ER and an '0xE' on RXD."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 21 }
genEquipInterfacesNGPWEthInterfaceStatusRxUndersize OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames received that are less than 64 bytes in length, contain a valid FCS, and were otherwise well formed."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 22 }
genEquipInterfacesNGPWEthInterfaceStatusRxOversize OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames received that exceeded maximum bytes in length, contain a valid FCS, and were otherwise well formed."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 23 }
genEquipInterfacesNGPWEthInterfaceStatusRxFragments OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames received which are less than 64 bytes in length and contain an invalid FCS."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 24 }
genEquipInterfacesNGPWEthInterfaceStatusRxJabber OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames received which exceed maximum length and contain an invalid FCS, including alignment errors."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 25 }
genEquipInterfacesNGPWEthInterfaceStatusRxDropped OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames received that are streamed to the system but are later dropped due to lack of system resources."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 26 }
genEquipInterfacesNGPWEthInterfaceStatusTxBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of bytes that were put on the wire including fragments of frames that were involved with collisions."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 27 }
genEquipInterfacesNGPWEthInterfaceStatusTxPackets OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of transmitted packets."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 28 }
genEquipInterfacesNGPWEthInterfaceStatusTxMulticast OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of Multicast valid frames transmitted (excluding Broadcast frames)."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 29 }
genEquipInterfacesNGPWEthInterfaceStatusTxBroadcast OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of Broadcast frames transmitted (excluding Multicast frames)."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 30 }
genEquipInterfacesNGPWEthInterfaceStatusTxMacPause OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of valid PAUSE MAC Control frames transmitted."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 31 }
genEquipInterfacesNGPWEthInterfaceStatusTxDefer OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames that were deferred upon first transmission attempt. Does not include frames involved in collisions.."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 32 }
genEquipInterfacesNGPWEthInterfaceStatusTxExcessDefer OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of frames aborted that were deferred for an excessive period of time (3036 byte times)."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 33 }
genEquipInterfacesNGPWEthInterfaceStatusTxSingleCollision OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames transmitted which experienced exactly one collision during transmission."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 34 }
genEquipInterfacesNGPWEthInterfaceStatusTxMultiCollision OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames transmitted which experienced 2-15 collisions."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 35 }
genEquipInterfacesNGPWEthInterfaceStatusTxLateCollision OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames transmitted that experienced a late collision during a transmission attempt."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 36 }
genEquipInterfacesNGPWEthInterfaceStatusTxExcessCollision OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of frames that experienced 16 collisions during transmission and were aborted."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 37 }
genEquipInterfacesNGPWEthInterfaceStatusTxNoCollision OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of frames transmitted that had no collision."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 38 }
genEquipInterfacesNGPWEthInterfaceStatusTxMacPauseHonored OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of times a valid PAUSE MAC Control frame was transmitted and honored."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 39 }
genEquipInterfacesNGPWEthInterfaceStatusTxDropped OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of times the input PFH is asserted."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 40 }
genEquipInterfacesNGPWEthInterfaceStatusTxJabber OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of oversized transmitted frames with an incorrect FCS value."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 41 }
genEquipInterfacesNGPWEthInterfaceStatusTxErrFcs OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of valid sized packets transmitted with an incorrec tFCS value."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 42 }
genEquipInterfacesNGPWEthInterfaceStatusTxControl OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of valid size frames transmitted with a Type Field signifying a Control frame.."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 43 }
genEquipInterfacesNGPWEthInterfaceStatusTxOversize OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of oversized transmitted frames with a correct."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 44 }
genEquipInterfacesNGPWEthInterfaceStatusTxUndersize OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with a correctFCS value."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 45 }
genEquipInterfacesNGPWEthInterfaceStatusTxFragments OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of transmitted frames less then 64 bytes, with an incorrect FCS value."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 46 }
genEquipInterfacesNGPWEthInterfaceStatusRxIwFrames OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames that were received and sent to the L3 Interworking module."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 47 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrFbpUnderrun OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due free buffer pool (FBP) Overrun."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 48 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrNonvalidMac OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of the number of received Ethernet frames whose MAC-DA is not valid."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 49 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrMru OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of the number of received Ethernet Interworking frames which were dropped due the Maximum Receive Unit."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 50 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrSdu OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of the number of Ethernet frames which were closed due the maximum frame size has been exceeded."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 51 }
genEquipInterfacesNGPWEthInterfaceStatusTxErrUnderrun OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of times Ethernet transmitter underun occurred."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 52 }
genEquipInterfacesNGPWEthInterfaceStatusRxErrOverrun OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsigned 64-bit modulo counter of number of received Ethernet frames which were closed or discarded due to a receive buffer overrun event."
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 53 }
genEquipInterfacesNGPWEthInterfaceStatusSlotID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted"
::= { genEquipInterfacesNGPWEthInterfaceStatusEntry 54 }
--
-- PW-LIC card staus table - pw-card-status-table
--
genEquipInterfacesNGPWCardStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesNGPWCardStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about PW-LIC card level status."
::= { genEquipInterfacesNGPW 7 }
genEquipInterfacesNGPWCardStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesNGPWCardStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about PW-LIC card level status."
INDEX { genEquipInterfacesNGPWCardStatusSlotID }
::= { genEquipInterfacesNGPWCardStatusTable 1 }
GenEquipInterfacesNGPWCardStatusEntry ::=
SEQUENCE {
genEquipInterfacesNGPWCardStatusSlotID
INTEGER,
genEquipInterfacesNGPWCardStatusSWVersion
DisplayString
}
genEquipInterfacesNGPWCardStatusSlotID OBJECT-TYPE
SYNTAX INTEGER (2..12)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot where PW-LIC is inserted."
::= { genEquipInterfacesNGPWCardStatusEntry 1 }
genEquipInterfacesNGPWCardStatusSWVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bundle ID."
::= { genEquipInterfacesNGPWCardStatusEntry 2 }
-- Switch Application Branch
genEquipInterfacesCet OBJECT IDENTIFIER ::= {genEquipInterfaces 8}
genEquipInterfacesCetGeneral OBJECT IDENTIFIER ::= {genEquipInterfacesCet 1}
genEquipInterfacesCetMru OBJECT-TYPE
SYNTAX INTEGER (64..9612)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum Frame Size."
::= { genEquipInterfacesCetGeneral 1 }
--
-- Switch Application if-physical-configuration-table
--
genEquipInterfacesCetPhyConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetPhyConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet physical port configuration table."
::= { genEquipInterfacesCet 2 }
genEquipInterfacesCetPhyConfigEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetPhyConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet physical port configuration table entry."
INDEX { genEquipInterfacesCetPhyConfigIfIndex }
::= { genEquipInterfacesCetPhyConfigTable 1 }
GenEquipInterfacesCetPhyConfigEntry ::=
SEQUENCE {
genEquipInterfacesCetPhyConfigIfIndex
INTEGER,
genEquipInterfacesCetPhyConfigDescription
DisplayString,
genEquipInterfacesCetPhyConfigMediaType
MediaType,
genEquipInterfacesCetPhyConfigAdmin
EnableDisable,
genEquipInterfacesCetPhyConfigAutoNegotiation
AutoNegMode,
genEquipInterfacesCetPhyConfigSpeed
SpeedDefs,
genEquipInterfacesCetPhyConfigDuplex
HalfFull,
genEquipInterfacesCetPhyConfigMasterSlave
MasterSalveSetMode,
-- genEquipInterfacesCetPhyConfigFlowControl
-- FlowControl,
genEquipInterfacesCetPhyConfigIfg
INTEGER,
genEquipInterfacesCetPhyConfigPreamble
INTEGER,
genEquipInterfacesCetPhyConfigMacAddress
OCTET STRING,
genEquipInterfacesCetPhyConfigType
PortType,
genEquipInterfacesCetPhyConfigPortPmAdmin
EnableDisable,
genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold
INTEGER,
genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold
INTEGER
}
genEquipInterfacesCetPhyConfigIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet physical port if-index table key."
::= { genEquipInterfacesCetPhyConfigEntry 1 }
genEquipInterfacesCetPhyConfigDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port user description."
::= { genEquipInterfacesCetPhyConfigEntry 2 }
genEquipInterfacesCetPhyConfigMediaType OBJECT-TYPE
SYNTAX MediaType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port media type."
::= { genEquipInterfacesCetPhyConfigEntry 3 }
genEquipInterfacesCetPhyConfigAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port administration."
::= { genEquipInterfacesCetPhyConfigEntry 4 }
genEquipInterfacesCetPhyConfigAutoNegotiation OBJECT-TYPE
SYNTAX AutoNegMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port auto negotiation state."
::= { genEquipInterfacesCetPhyConfigEntry 5 }
genEquipInterfacesCetPhyConfigSpeed OBJECT-TYPE
SYNTAX SpeedDefs
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical maximum port speed Affects Auto Neg Capability Advertised Bits."
::= { genEquipInterfacesCetPhyConfigEntry 6 }
genEquipInterfacesCetPhyConfigDuplex OBJECT-TYPE
SYNTAX HalfFull
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port duplex Affects Auto Neg Capability Advertised Bits."
::= { genEquipInterfacesCetPhyConfigEntry 7 }
genEquipInterfacesCetPhyConfigMasterSlave OBJECT-TYPE
SYNTAX MasterSalveSetMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port master slave for 1000BaseT Affects Auto Neg
Capability Advertised Bits."
::= { genEquipInterfacesCetPhyConfigEntry 8 }
--genEquipInterfacesCetPhyConfigFlowControl OBJECT-TYPE
-- SYNTAX FlowControl
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "Setting Ethernet physical port flow-control Affects Auto Neg Capability Advertised Bits"
--::= { genEquipInterfacesCetPhyConfigEntry 9 }
genEquipInterfacesCetPhyConfigIfg OBJECT-TYPE
SYNTAX INTEGER (6..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Inter Frame GAP value in bytes."
::= { genEquipInterfacesCetPhyConfigEntry 10 }
genEquipInterfacesCetPhyConfigPreamble OBJECT-TYPE
SYNTAX INTEGER (6..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"port preamble value in bytes."
::= { genEquipInterfacesCetPhyConfigEntry 11 }
genEquipInterfacesCetPhyConfigMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet physical port mac-address."
::= { genEquipInterfacesCetPhyConfigEntry 12 }
genEquipInterfacesCetPhyConfigType OBJECT-TYPE
SYNTAX PortType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port type."
::= { genEquipInterfacesCetPhyConfigEntry 13 }
genEquipInterfacesCetPhyConfigPortPmAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable PMs on port level."
::= { genEquipInterfacesCetPhyConfigEntry 14 }
genEquipInterfacesCetPhyConfigPortPmRxBytesThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold of received bytes PM."
::= { genEquipInterfacesCetPhyConfigEntry 15 }
genEquipInterfacesCetPhyConfigPortPmTxBytesThreshold OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Threshold of transmitted bytes PM."
::= { genEquipInterfacesCetPhyConfigEntry 16 }
--
-- Interfaces Switch Application Physical Port Status Table
-- if-physical-status-table
--
genEquipInterfacesCetPhyStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetPhyStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet physical port configuration table."
::= { genEquipInterfacesCet 3 }
genEquipInterfacesCetPhyStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetPhyStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table allows configuration of the 16 internal E1/DS1 ports."
INDEX { genEquipInterfacesCetPhyStatusIfIndex }
::= { genEquipInterfacesCetPhyStatusTable 1 }
GenEquipInterfacesCetPhyStatusEntry ::=
SEQUENCE {
genEquipInterfacesCetPhyStatusIfIndex
INTEGER,
genEquipInterfacesCetPhyStatusMediaType
MediaType,
genEquipInterfacesCetPhyStatusOperationalStatus
DownUp,
genEquipInterfacesCetPhystatusAutoNegotiation
AutoNegMode,
genEquipInterfacesCetPhyStatusSpeed
SpeedDefs,
genEquipInterfacesCetPhyStatusDuplex
HalfFull,
genEquipInterfacesCetPhyStatusMasterSlave
MasterSalveSetMode
}
genEquipInterfacesCetPhyStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet physical port if-index table key."
::= { genEquipInterfacesCetPhyStatusEntry 1 }
genEquipInterfacesCetPhyStatusMediaType OBJECT-TYPE
SYNTAX MediaType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Setting Ethernet physical port media type."
::= { genEquipInterfacesCetPhyStatusEntry 2 }
genEquipInterfacesCetPhyStatusOperationalStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet physical port operational-status."
::= { genEquipInterfacesCetPhyStatusEntry 3 }
genEquipInterfacesCetPhystatusAutoNegotiation OBJECT-TYPE
SYNTAX AutoNegMode
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet physical port auto negotiation status."
::= { genEquipInterfacesCetPhyStatusEntry 4 }
genEquipInterfacesCetPhyStatusSpeed OBJECT-TYPE
SYNTAX SpeedDefs
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual Ethernet physical port speed."
::= { genEquipInterfacesCetPhyStatusEntry 5 }
genEquipInterfacesCetPhyStatusDuplex OBJECT-TYPE
SYNTAX HalfFull
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual Ethernet physical port duplex."
::= { genEquipInterfacesCetPhyStatusEntry 6 }
genEquipInterfacesCetPhyStatusMasterSlave OBJECT-TYPE
SYNTAX MasterSalveSetMode
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual Ethernet physical port master slave for 1000BaseT."
::= { genEquipInterfacesCetPhyStatusEntry 7 }
--
-- Switch Application if-logical-configuration-table
--
genEquipInterfacesCetLogicConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetLogicConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the ingress logical port configuration (it is the same point of view for
single interface or group of ports) ."
::= { genEquipInterfacesCet 4 }
genEquipInterfacesCetLogicConfigEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetLogicConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the ingress logical port configuration (it is the same point of
view for single interface or group of ports)."
INDEX { genEquipInterfacesCetLogicConfigIfIndex }
::= { genEquipInterfacesCetLogicConfigTable 1 }
GenEquipInterfacesCetLogicConfigEntry ::=
SEQUENCE {
genEquipInterfacesCetLogicConfigIfIndex
INTEGER,
genEquipInterfacesCetLogicConfigTrafficFlow
EnableDisable,
genEquipInterfacesCetLogicConfigEdgePort
EdgePortType,
genEquipInterfacesCetLogicConfigIngressTcamClassification
INTEGER,
genEquipInterfacesCetLogicConfigDefaultVlanTag
INTEGER,
genEquipInterfacesCetLogicConfigInLineCompensation
INTEGER,
genEquipInterfacesCetLogicConfigOutLineCompensation
INTEGER,
genEquipInterfacesCetLogicConfigPclId
INTEGER,
genEquipInterfacesCetLogicConfigDefCos
INTEGER,
genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode
TrustMode,
genEquipInterfacesCetLogicConfigDscpToCosTrustMode
TrustMode,
genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode
TrustMode,
genEquipInterfacesCetLogicConfigMacAddress
OCTET STRING,
genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin
EnableDisable,
genEquipInterfacesCetLogicConfigLoopbackAdmin
EnableDisable,
genEquipInterfacesCetLogicConfigLoopbackDuration
INTEGER
}
genEquipInterfacesCetLogicConfigIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetLogicConfigEntry 1 }
genEquipInterfacesCetLogicConfigTrafficFlow OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control the the traffic via logical port which is connected to physical interface
(in case of group it control the all interfaces of the group)."
::= { genEquipInterfacesCetLogicConfigEntry 2 }
genEquipInterfacesCetLogicConfigEdgePort OBJECT-TYPE
SYNTAX EdgePortType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Edge Mode (edge / non-edge)."
::= { genEquipInterfacesCetLogicConfigEntry 3 }
genEquipInterfacesCetLogicConfigIngressTcamClassification OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ingress-tcam-classification."
::= { genEquipInterfacesCetLogicConfigEntry 4 }
genEquipInterfacesCetLogicConfigDefaultVlanTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Default Network Vlan ID."
::= { genEquipInterfacesCetLogicConfigEntry 5 }
genEquipInterfacesCetLogicConfigInLineCompensation OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Layer 1 Ingress Byte Compensation."
::= { genEquipInterfacesCetLogicConfigEntry 6 }
genEquipInterfacesCetLogicConfigOutLineCompensation OBJECT-TYPE
SYNTAX INTEGER (0..26)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Layer 1 Egress Byte Compensation from the specific logical port."
::= { genEquipInterfacesCetLogicConfigEntry 7 }
genEquipInterfacesCetLogicConfigPclId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"...."
::= { genEquipInterfacesCetLogicConfigEntry 8 }
genEquipInterfacesCetLogicConfigDefCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Default CoS."
::= { genEquipInterfacesCetLogicConfigEntry 9 }
genEquipInterfacesCetLogicConfigVlanUpToCosTrustMode OBJECT-TYPE
SYNTAX TrustMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trust VLAN UP bits for classification from the specific logical port."
::= { genEquipInterfacesCetLogicConfigEntry 10 }
genEquipInterfacesCetLogicConfigDscpToCosTrustMode OBJECT-TYPE
SYNTAX TrustMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trust DSCP for classification from the specific logical port."
::= { genEquipInterfacesCetLogicConfigEntry 11 }
genEquipInterfacesCetLogicConfigMplsExpToCosTrustMode OBJECT-TYPE
SYNTAX TrustMode
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trust MPLS EXP bits for classification from the specific logical port."
::= { genEquipInterfacesCetLogicConfigEntry 12 }
genEquipInterfacesCetLogicConfigMacAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet logical port mac-address."
::= { genEquipInterfacesCetLogicConfigEntry 13 }
genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Swap MAC address for Ethernet port loopback."
::= { genEquipInterfacesCetLogicConfigEntry 14 }
genEquipInterfacesCetLogicConfigLoopbackAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet loopback admin."
::= { genEquipInterfacesCetLogicConfigEntry 15 }
genEquipInterfacesCetLogicConfigLoopbackDuration OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet loopback duration. Allowed values 1 to 9000 seconds."
::= { genEquipInterfacesCetLogicConfigEntry 16 }
--
-- Switch Application if-logical-mgr
--
genEquipInterfacesCetLogicStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetLogicStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table holds the ingress logical port status
(it is the same point of view for single interface or group of ports)."
::= { genEquipInterfacesCet 5 }
genEquipInterfacesCetLogicStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetLogicStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table entry holds the ingress logical port status
(it is the same point of view for single interface or group of ports)."
INDEX { genEquipInterfacesCetLogicStatusIfIndex }
::= { genEquipInterfacesCetLogicStatusTable 1 }
GenEquipInterfacesCetLogicStatusEntry ::=
SEQUENCE {
genEquipInterfacesCetLogicStatusIfIndex
INTEGER,
genEquipInterfacesCetLogicStatusOperationalStatus
DownUp
}
genEquipInterfacesCetLogicStatusIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetLogicStatusEntry 1 }
genEquipInterfacesCetLogicStatusOperationalStatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet logical port operational-status (Up or Down)."
::= { genEquipInterfacesCetLogicStatusEntry 2 }
--
-- Switch Application if-logical-broadcast_policing-table
--
genEquipInterfacesCetBcastPolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetBcastPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Port Broadcast configuration table."
::= { genEquipInterfacesCet 6 }
genEquipInterfacesCetBcastPolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetBcastPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Port Broadcast configuration table entry."
INDEX { genEquipInterfacesCetBcastPolicerAssociationIfIndex }
::= { genEquipInterfacesCetBcastPolicerAssociationTable 1 }
GenEquipInterfacesCetBcastPolicerAssociationEntry ::=
SEQUENCE {
genEquipInterfacesCetBcastPolicerAssociationIfIndex
INTEGER,
genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId
INTEGER,
genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin
EnableDisable,
genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus
RowStatus
}
genEquipInterfacesCetBcastPolicerAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 1 }
genEquipInterfacesCetBcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Policer Profile."
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 2 }
genEquipInterfacesCetBcastPolicerAssociationAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Broadcast Policer Admin (enable / disable)."
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 3 }
genEquipInterfacesCetBcastPolicerAssociationAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetBcastPolicerAssociationEntry 30 }
--
-- Switch Application if-logical-ethertype1_policing-table
--
genEquipInterfacesCetEtype1PolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype1PolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Policing of user configuration ethertype type 1 (at port level) table."
::= { genEquipInterfacesCet 7 }
genEquipInterfacesCetEtype1PolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetEtype1PolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Policing of user configuration ethertype type 1 (at port level) table entry."
INDEX { genEquipInterfacesCetEtype1PolicerAssociationIfIndex }
::= { genEquipInterfacesCetEtype1PolicerAssociationTable 1 }
GenEquipInterfacesCetEtype1PolicerAssociationEntry ::=
SEQUENCE {
genEquipInterfacesCetEtype1PolicerAssociationIfIndex
INTEGER,
genEquipInterfacesCetEtype1PolicerAssociationProfileId
INTEGER,
genEquipInterfacesCetEtype1PolicerAssociationEthertype
INTEGER,
genEquipInterfacesCetEtype1PolicerAssociationAdmin
EnableDisable,
genEquipInterfacesCetEtype1PolicerAssociationRowStatus
RowStatus
}
genEquipInterfacesCetEtype1PolicerAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 1 }
genEquipInterfacesCetEtype1PolicerAssociationProfileId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Profile ID."
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 2 }
genEquipInterfacesCetEtype1PolicerAssociationEthertype OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Ethertype 1 user configuration value."
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 3 }
genEquipInterfacesCetEtype1PolicerAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Ethertype 1 Policer Admin (enable / disable)."
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 4 }
genEquipInterfacesCetEtype1PolicerAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetEtype1PolicerAssociationEntry 30 }
--
-- Switch Application if-logical-ethertype2_policing-table
--
genEquipInterfacesCetEtype2PolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype2PolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Policing of user configuration ethertype type 2 (at port level) table."
::= { genEquipInterfacesCet 8 }
genEquipInterfacesCetEtype2PolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetEtype2PolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Policing of user configuration ethertype type 2 (at port level) table."
INDEX { genEquipInterfacesCetEtype2PolicerAssociationIfIndex }
::= { genEquipInterfacesCetEtype2PolicerAssociationTable 1 }
GenEquipInterfacesCetEtype2PolicerAssociationEntry ::=
SEQUENCE {
genEquipInterfacesCetEtype2PolicerAssociationIfIndex
INTEGER,
genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId
INTEGER,
genEquipInterfacesCetEtype2PolicerAssociationEthertype
INTEGER,
genEquipInterfacesCetEtype2PolicerAssociationAdmin
EnableDisable,
genEquipInterfacesCetEtype2PolicerAssociationRowStatus
RowStatus
}
genEquipInterfacesCetEtype2PolicerAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 1 }
genEquipInterfacesCetEtype2PolicerAssociationAssociatedProfileId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Profile ID."
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 2 }
genEquipInterfacesCetEtype2PolicerAssociationEthertype OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Ethertype 2 user configuration value."
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 3 }
genEquipInterfacesCetEtype2PolicerAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Ethertype 2 Policer Admin (enable / disable)."
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 4 }
genEquipInterfacesCetEtype2PolicerAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetEtype2PolicerAssociationEntry 30 }
--
-- Switch Application if-logical-ethertype3_policing-table
--
genEquipInterfacesCetEtype3PolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetEtype3PolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Policing of user configuration ethertype type 3 (at port level) table."
::= { genEquipInterfacesCet 9 }
genEquipInterfacesCetEtype3PolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetEtype3PolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Policing of user configuration ethertype type 3 (at port level) table entry."
INDEX { genEquipInterfacesCetEtype3PolicerAssociationIfIndex }
::= { genEquipInterfacesCetEtype3PolicerAssociationTable 1 }
GenEquipInterfacesCetEtype3PolicerAssociationEntry ::=
SEQUENCE {
genEquipInterfacesCetEtype3PolicerAssociationIfIndex
INTEGER,
genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId
INTEGER,
genEquipInterfacesCetEtype3PolicerAssociationEthertype
INTEGER,
genEquipInterfacesCetEtype3PolicerAssociationAdmin
EnableDisable,
genEquipInterfacesCetEtype3PolicerAssociationRowStatus
RowStatus
}
genEquipInterfacesCetEtype3PolicerAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 1 }
genEquipInterfacesCetEtype3PolicerAssociationAssociatedProfileId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Profile ID."
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 2 }
genEquipInterfacesCetEtype3PolicerAssociationEthertype OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ethernet Ethertype 3 user configuration value."
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 3 }
genEquipInterfacesCetEtype3PolicerAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Ethertype 3 Policer Admin (enable / disable)."
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 4 }
genEquipInterfacesCetEtype3PolicerAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetEtype3PolicerAssociationEntry 30 }
--
-- Switch Application if-logical-multicast_policing-table
--
genEquipInterfacesCetMcastPolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetMcastPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Port Multicast configuration table."
::= { genEquipInterfacesCet 10 }
genEquipInterfacesCetMcastPolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetMcastPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Port Multicast configuration table."
INDEX { genEquipInterfacesCetMcastPolicerAssociationIfIndex }
::= { genEquipInterfacesCetMcastPolicerAssociationTable 1 }
GenEquipInterfacesCetMcastPolicerAssociationEntry ::=
SEQUENCE {
genEquipInterfacesCetMcastPolicerAssociationIfIndex
INTEGER,
genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId
INTEGER,
genEquipInterfacesCetMcastPolicerAssociationAdmin
EnableDisable,
genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus
RowStatus
}
genEquipInterfacesCetMcastPolicerAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 1 }
genEquipInterfacesCetMcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Profile ID."
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 2 }
genEquipInterfacesCetMcastPolicerAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Multicast Policer Admin (enable / disable)."
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 3 }
genEquipInterfacesCetMcastPolicerAssociationAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetMcastPolicerAssociationEntry 30 }
--
-- Switch Application if-logical-unicast_policing-table
--
genEquipInterfacesCetUcastPolicerAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetUcastPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Port Multicast configuration table."
::= { genEquipInterfacesCet 11 }
genEquipInterfacesCetUcastPolicerAssociationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetUcastPolicerAssociationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ethernet Port Multicast configuration table."
INDEX { genEquipInterfacesCetUcastPolicerAssociationIfIndex }
::= { genEquipInterfacesCetUcastPolicerAssociationTable 1 }
GenEquipInterfacesCetUcastPolicerAssociationEntry ::=
SEQUENCE {
genEquipInterfacesCetUcastPolicerAssociationIfIndex
INTEGER,
genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId
INTEGER,
genEquipInterfacesCetUcastPolicerAssociationAdmin
EnableDisable,
genEquipInterfacesCetUcastPolicerAssociationRowStatus
RowStatus
}
genEquipInterfacesCetUcastPolicerAssociationIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet Logical port if-index table key."
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 1 }
genEquipInterfacesCetUcastPolicerAssociationAssociatedProfileId OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Policer Profile ID."
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 2 }
genEquipInterfacesCetUcastPolicerAssociationAdmin OBJECT-TYPE
SYNTAX EnableDisable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ingress Unicast Policer Admin (enable / disable)."
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 3 }
genEquipInterfacesCetUcastPolicerAssociationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetUcastPolicerAssociationEntry 30 }
--
-- Switch Application sys-if-logical-mgr-if-logical-lag-table
--
genEquipInterfacesCetLagTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCetLagEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the members of a Link Aggregation Group."
::= { genEquipInterfacesCet 12 }
genEquipInterfacesCetLagEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCetLagEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table holds the members of a Link Aggregation Group entry."
INDEX { genEquipInterfacesCetLagIfIndex }
::= { genEquipInterfacesCetLagTable 1 }
GenEquipInterfacesCetLagEntry ::=
SEQUENCE {
genEquipInterfacesCetLagIfIndex
INTEGER,
genEquipInterfacesCetLagMember1IfIndex
INTEGER,
genEquipInterfacesCetLagMember2IfIndex
INTEGER,
genEquipInterfacesCetLagMember3IfIndex
INTEGER,
genEquipInterfacesCetLagMember4IfIndex
INTEGER,
genEquipInterfacesCetLagMember5IfIndex
INTEGER,
genEquipInterfacesCetLagMember6IfIndex
INTEGER,
genEquipInterfacesCetLagMember7IfIndex
INTEGER,
genEquipInterfacesCetLagMember8IfIndex
INTEGER,
genEquipInterfacesCetLagMember9IfIndex
INTEGER,
genEquipInterfacesCetLagMember10IfIndex
INTEGER,
genEquipInterfacesCetLagMember11IfIndex
INTEGER,
genEquipInterfacesCetLagMember12IfIndex
INTEGER,
genEquipInterfacesCetLagMember13IfIndex
INTEGER,
genEquipInterfacesCetLagMember14IfIndex
INTEGER,
genEquipInterfacesCetLagMember15IfIndex
INTEGER,
genEquipInterfacesCetLagMember16IfIndex
INTEGER,
genEquipInterfacesCetLagRowStatus
RowStatus
}
genEquipInterfacesCetLagIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Link aggregation group IF index."
::= { genEquipInterfacesCetLagEntry 1 }
genEquipInterfacesCetLagMember1IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 1 IF index."
::= { genEquipInterfacesCetLagEntry 2 }
genEquipInterfacesCetLagMember2IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 2 IF index."
::= { genEquipInterfacesCetLagEntry 3 }
genEquipInterfacesCetLagMember3IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 3 IF index."
::= { genEquipInterfacesCetLagEntry 4 }
genEquipInterfacesCetLagMember4IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 4 IF index."
::= { genEquipInterfacesCetLagEntry 5 }
genEquipInterfacesCetLagMember5IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 5 IF index."
::= { genEquipInterfacesCetLagEntry 6 }
genEquipInterfacesCetLagMember6IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 6 IF index."
::= { genEquipInterfacesCetLagEntry 7 }
genEquipInterfacesCetLagMember7IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 7 IF index."
::= { genEquipInterfacesCetLagEntry 8 }
genEquipInterfacesCetLagMember8IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 8 IF index."
::= { genEquipInterfacesCetLagEntry 9 }
genEquipInterfacesCetLagMember9IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 9 IF index."
::= { genEquipInterfacesCetLagEntry 10 }
genEquipInterfacesCetLagMember10IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 9 IF index."
::= { genEquipInterfacesCetLagEntry 11 }
genEquipInterfacesCetLagMember11IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 11 IF index."
::= { genEquipInterfacesCetLagEntry 12 }
genEquipInterfacesCetLagMember12IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 12 IF index."
::= { genEquipInterfacesCetLagEntry 13 }
genEquipInterfacesCetLagMember13IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 13 IF index."
::= { genEquipInterfacesCetLagEntry 14 }
genEquipInterfacesCetLagMember14IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 14 IF index."
::= { genEquipInterfacesCetLagEntry 15 }
genEquipInterfacesCetLagMember15IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 15 IF index."
::= { genEquipInterfacesCetLagEntry 16 }
genEquipInterfacesCetLagMember16IfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Link aggregation member 16 IF index."
::= { genEquipInterfacesCetLagEntry 17 }
genEquipInterfacesCetLagRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Table Mib Row Status."
::= { genEquipInterfacesCetLagEntry 30 }
--
-- Switch Application sw-ap-service-to-instance-table
--
genEquipServicesCetConfigServiceToInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipServicesCetConfigServiceToInstanceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used for mapping xSTP instance number per service."
::= { genEquipInterfacesCet 13 }
genEquipServicesCetConfigServiceToInstanceEntry OBJECT-TYPE
SYNTAX GenEquipServicesCetConfigServiceToInstanceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry is used for mapping xSTP instance number per service."
INDEX { genEquipServicesCetConfigServiceToInstanceServiceIndex }
::= { genEquipServicesCetConfigServiceToInstanceTable 1 }
GenEquipServicesCetConfigServiceToInstanceEntry ::=
SEQUENCE {
genEquipServicesCetConfigServiceToInstanceServiceIndex
INTEGER,
genEquipServicesCetConfigServiceToInstanceInstanceIndex
INTEGER
}
genEquipServicesCetConfigServiceToInstanceServiceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Service ID."
::= { genEquipServicesCetConfigServiceToInstanceEntry 1 }
genEquipServicesCetConfigServiceToInstanceInstanceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"xSTP Instance ID for the specific Service."
::= { genEquipServicesCetConfigServiceToInstanceEntry 2 }
-- IF Manager if-manager-configuration-table
genEquipInterfacesIfManager OBJECT IDENTIFIER ::= {genEquipInterfaces 9}
genEquipInterfacesIfManagerTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesIfManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains a list of configuration information about the user managed interfaces."
::= { genEquipInterfacesIfManager 1 }
genEquipInterfacesIfManagerEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesIfManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table entry contains a list of configuration information about the user managed interfaces."
INDEX { ifIndex }
::= { genEquipInterfacesIfManagerTable 1 }
GenEquipInterfacesIfManagerEntry ::=
SEQUENCE {
genEquipInterfacesIfManagerifCascading
IfMgrTrueFalse,
genEquipInterfacesIfManagerifSecondaryOperStatus
INTEGER
}
genEquipInterfacesIfManagerifCascading OBJECT-TYPE
SYNTAX IfMgrTrueFalse
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cascading state of the interface."
::= { genEquipInterfacesIfManagerEntry 1 }
genEquipInterfacesIfManagerifSecondaryOperStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An additional information about the current operational state of the interface."
::= { genEquipInterfacesIfManagerEntry 2 }
--
-- IF Cascading if-physical-cascading-port-config-table
genEquipInterfacesCascading OBJECT IDENTIFIER ::= {genEquipInterfaces 10}
genEquipInterfacesCascadingConfigurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesCascadingConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cascading Port Configuration Table."
::= { genEquipInterfacesCascading 1 }
genEquipInterfacesCascadingConfigurationEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesCascadingConfigurationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cascading Port Configuration Table entry."
INDEX { genEquipInterfacesCascadingConfigurationIfindex }
::= { genEquipInterfacesCascadingConfigurationTable 1 }
GenEquipInterfacesCascadingConfigurationEntry ::=
SEQUENCE {
genEquipInterfacesCascadingConfigurationIfindex
INTEGER,
genEquipInterfacesCascadingConfigurationCascading
MibTrueFalse
}
genEquipInterfacesCascadingConfigurationIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cascading port if-index table key."
::= { genEquipInterfacesCascadingConfigurationEntry 1 }
genEquipInterfacesCascadingConfigurationCascading OBJECT-TYPE
SYNTAX MibTrueFalse
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the port is cascading or not."
::= { genEquipInterfacesCascadingConfigurationEntry 2 }
-- STM-1/OC-3
genEquipInterfacesStm1Rst OBJECT IDENTIFIER ::= {genEquipInterfaces 11}
-- stm1-config-table
genEquipInterfacesStm1RstConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1/OC-3 configuration table."
::= { genEquipInterfacesStm1Rst 1 }
genEquipInterfacesStm1RstConfigEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesStm1RstConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1/OC-3 configuration table entry."
INDEX { genEquipInterfacesStm1RstConfigIfindex }
::= { genEquipInterfacesStm1RstConfigTable 1 }
GenEquipInterfacesStm1RstConfigEntry ::=
SEQUENCE {
genEquipInterfacesStm1RstConfigIfindex
INTEGER,
genEquipInterfacesStm1RstConfigPort
INTEGER,
genEquipInterfacesStm1RstConfigAdmin
EnableDisableSMI2,
genEquipInterfacesStm1RstConfigMute
INTEGER
}
genEquipInterfacesStm1RstConfigIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface index of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstConfigEntry 1 }
genEquipInterfacesStm1RstConfigPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstConfigEntry 2 }
genEquipInterfacesStm1RstConfigAdmin OBJECT-TYPE
SYNTAX EnableDisableSMI2
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Admin Sate of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstConfigEntry 3 }
genEquipInterfacesStm1RstConfigMute OBJECT-TYPE
SYNTAX INTEGER {
unmute(0),
mute(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SFP Mute config of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstConfigEntry 4 }
--
-- stm1-status-table
genEquipInterfacesStm1RstStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1/OC-3 status table."
::= { genEquipInterfacesStm1Rst 2 }
genEquipInterfacesStm1RstStatusEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesStm1RstStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1/OC-3 status table entry."
INDEX { genEquipInterfacesStm1RstStatusIfindex }
::= { genEquipInterfacesStm1RstStatusTable 1 }
GenEquipInterfacesStm1RstStatusEntry ::=
SEQUENCE {
genEquipInterfacesStm1RstStatusIfindex
INTEGER,
genEquipInterfacesStm1RstStatusLoopbackTimer
INTEGER,
genEquipInterfacesStm1RstStatusLoopbackType
RSTLoopbackType,
genEquipInterfacesStm1RstStatusOperstatus
DownUp
}
genEquipInterfacesStm1RstStatusIfindex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface index of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstStatusEntry 1 }
genEquipInterfacesStm1RstStatusLoopbackTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstStatusEntry 2 }
genEquipInterfacesStm1RstStatusLoopbackType OBJECT-TYPE
SYNTAX RSTLoopbackType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The loopback type of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstStatusEntry 3 }
genEquipInterfacesStm1RstStatusOperstatus OBJECT-TYPE
SYNTAX DownUp
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational status of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstStatusEntry 4 }
-- stm1-status-table only prbs
genEquipInterfacesStm1RstPrbsTable OBJECT-TYPE
SYNTAX SEQUENCE OF GenEquipInterfacesStm1RstPrbsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1/OC-3 status table."
::= { genEquipInterfacesStm1Rst 3 }
genEquipInterfacesStm1RstPrbsEntry OBJECT-TYPE
SYNTAX GenEquipInterfacesStm1RstPrbsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"STM-1/OC-3 status table entry."
INDEX { genEquipInterfacesStm1RstStatusIfindex }
::= { genEquipInterfacesStm1RstPrbsTable 1 }
GenEquipInterfacesStm1RstPrbsEntry ::=
SEQUENCE {
genEquipInterfacesStm1RstPrbsCheckLineClear
INTEGER,
genEquipInterfacesStm1RstPrbsCheckLine
INTEGER,
genEquipInterfacesStm1RstPrbsCheckLineInv
INTEGER,
genEquipInterfacesStm1RstPrbsCheckLineStatus
DisplayString,
genEquipInterfacesStm1RstPrbsCheckLineTotErr
INTEGER,
genEquipInterfacesStm1RstPrbsCheckRadioClear
INTEGER,
genEquipInterfacesStm1RstPrbsCheckRadio
INTEGER,
genEquipInterfacesStm1RstPrbsCheckRadioInv
INTEGER,
genEquipInterfacesStm1RstPrbsCheckRadioStatus
DisplayString,
genEquipInterfacesStm1RstPrbsCheckRadioTotErr
INTEGER,
genEquipInterfacesStm1RstPrbsGenLine
INTEGER,
genEquipInterfacesStm1RstPrbsGenLineErrIns
INTEGER,
genEquipInterfacesStm1RstPrbsGenLineInv
INTEGER,
genEquipInterfacesStm1RstPrbsGenRadio
INTEGER,
genEquipInterfacesStm1RstPrbsGenRadioErrIns
INTEGER,
genEquipInterfacesStm1RstPrbsGenRadioInv
INTEGER
}
genEquipInterfacesStm1RstPrbsCheckLineClear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Line Direction Reset counter of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 1 }
genEquipInterfacesStm1RstPrbsCheckLine OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Line Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 2 }
genEquipInterfacesStm1RstPrbsCheckLineInv OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Line Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 3 }
genEquipInterfacesStm1RstPrbsCheckLineStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Line Direction Status of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 4 }
genEquipInterfacesStm1RstPrbsCheckLineTotErr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Line Direction Total Error counter of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 5 }
genEquipInterfacesStm1RstPrbsCheckRadioClear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Radio Direction Reset counter of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 6 }
genEquipInterfacesStm1RstPrbsCheckRadio OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Radio Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 7 }
genEquipInterfacesStm1RstPrbsCheckRadioInv OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Radio Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 8 }
genEquipInterfacesStm1RstPrbsCheckRadioStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Radio Direction Status of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 9 }
genEquipInterfacesStm1RstPrbsCheckRadioTotErr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Checker Radio Direction Total Error counter of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 10 }
genEquipInterfacesStm1RstPrbsGenLine OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Generator Line Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 11 }
genEquipInterfacesStm1RstPrbsGenLineErrIns OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Generator Line Direction Error Insert of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 12 }
genEquipInterfacesStm1RstPrbsGenLineInv OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Generator Line Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 13 }
genEquipInterfacesStm1RstPrbsGenRadio OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Generator Radio Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 14 }
genEquipInterfacesStm1RstPrbsGenRadioErrIns OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Generator Radio Direction Error Insert of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 15 }
genEquipInterfacesStm1RstPrbsGenRadioInv OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The PRBS Generator Radio Direction of the STM-1/OC-3 interface."
::= { genEquipInterfacesStm1RstPrbsEntry 16 }
-- ###########################################################
-- Traps Section
-- ###########################################################
alarmTrap TRAP-TYPE
ENTERPRISE microwave-radio
VARIABLES { genEquipCurrentAlarmCounter,
genEquipCurrentAlarmRaisedTimeT,
genEquipCurrentAlarmId,
genEquipCurrentAlarmSlotId,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmModule,
genEquipCurrentAlarmDesc,
genEquipMostSevereAlarm,
genEquipNetworkAgentIp,
genEquipCurrentAlarmState,
genEquipTrapCfgMgrCLLI
}
DESCRIPTION "Alarm network trap"
::= 1001
eventTrap TRAP-TYPE
ENTERPRISE microwave-radio
VARIABLES { genEquipCurrentAlarmCounter,
genEquipCurrentAlarmRaisedTimeT,
genEquipCurrentAlarmId,
genEquipCurrentAlarmSlotId,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmModule,
genEquipCurrentAlarmDesc,
genEquipMostSevereAlarm,
genEquipNetworkAgentIp,
genEquipTrapCfgMgrCLLI
}
DESCRIPTION "Event network trap"
::= 1002
heartbeatTrap TRAP-TYPE
ENTERPRISE microwave-radio
VARIABLES { genEquipTrapCfgMgrCLLI
}
DESCRIPTION "The heartbeat trap, sent once per heartbeat period"
::= 1003
eventTrapSTP TRAP-TYPE -- STP, RSTP, Ring RSTP trap
ENTERPRISE microwave-radio
VARIABLES { genEquipCurrentAlarmCounter, -- general event parameters
genEquipCurrentAlarmRaisedTimeT,
genEquipCurrentAlarmId,
genEquipCurrentAlarmSlotId,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmModule,
genEquipCurrentAlarmDesc, -- This field shows show the descriptions of the event
-- "STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
-- Role: <Role>, State: <state>"
genEquipMostSevereAlarm,
genEquipNetworkAgentIp,
genEquipTrapCfgMgrCLLI,
genEquipEthernetSwitchXSTPParamsEthernetPortsRole, -- event trigger
genEquipEthernetSwitchXSTPParamsEthernetPortsState, -- event trigger
genEquipEthernetSwitchXSTPBridgeRole,
genEquipEthernetSwitchXSTPRootID -- RSTP parameters
}
DESCRIPTION "STP trap.
(1) The description field shows show the descriptions of the event
STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
Role: <Role>, State: <state>
In addition to the general trap event var-binds, this trap also adds the STP parameters."
::= 1004
genTraps OBJECT IDENTIFIER ::= { microwave-radio 11 }
generalV3Trap NOTIFICATION-TYPE
OBJECTS { genEquipCurrentAlarmCounter,
genEquipCurrentAlarmRaisedTimeT,
genEquipCurrentAlarmId,
genEquipCurrentAlarmSlotId,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmModule,
genEquipCurrentAlarmDesc,
genEquipMostSevereAlarm,
genEquipNetworkAgentIp,
genEquipCurrentAlarmState,
genEquipTrapCfgMgrCLLI
}
STATUS current
DESCRIPTION "General network V3 trap"
::= { genTraps 1 }
eventV3Trap NOTIFICATION-TYPE
OBJECTS { genEquipCurrentAlarmCounter,
genEquipCurrentAlarmRaisedTimeT,
genEquipCurrentAlarmId,
genEquipCurrentAlarmSlotId,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmModule,
genEquipCurrentAlarmDesc,
genEquipMostSevereAlarm,
genEquipNetworkAgentIp,
genEquipTrapCfgMgrCLLI
}
STATUS current
DESCRIPTION "Event network V3 trap"
::= { genTraps 2 }
heartbeatV3Trap NOTIFICATION-TYPE
OBJECTS {
genEquipTrapCfgMgrCLLI
}
STATUS current
DESCRIPTION
"Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period"
::= { genTraps 3 }
eventv3TrapSTP NOTIFICATION-TYPE -- STP, RSTP, Ring RSTP trap
OBJECTS { genEquipCurrentAlarmCounter, -- general event parameters
genEquipCurrentAlarmRaisedTimeT,
genEquipCurrentAlarmId,
genEquipCurrentAlarmSlotId,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmModule,
genEquipCurrentAlarmDesc, -- This field shows show the descriptions of the event
-- "STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
-- Role: <Role>, State: <state>,
genEquipMostSevereAlarm,
genEquipNetworkAgentIp,
genEquipTrapCfgMgrCLLI,
genEquipEthernetSwitchXSTPParamsEthernetPortsRole, -- event trigger
genEquipEthernetSwitchXSTPParamsEthernetPortsState, -- event trigger
genEquipEthernetSwitchXSTPBridgeRole,
genEquipEthernetSwitchXSTPRootID -- RSTP parameters
}
STATUS current
DESCRIPTION "STP trap.
(1) The description field shows show the descriptions of the event
STP event - on port: <port>, root id: <root id>, Bridge role: <bridge role>,
Role: <Role>, State: <state>,
In addition to the general trap event var-binds, this trap also adds the STP parameters."
::= { genTraps 4 }
-- ###########################################################
-- NG Traps Section
-- ###########################################################
alarmTrap TRAP-TYPE
ENTERPRISE microwave-radio
VARIABLES { genEquipCurrentAlarmCounter,
genEquipCurrentAlarmRaisedTimeT,
genEquipNetworkAgentIp,
genEquipCurrentAlarmId,
genEquipCurrentAlarmDesc,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmState,
genEquipCurrentAlarmUserText,
genEquipTrapCfgMgrCLLI,
genEquipNetworkAgentIpV6
}
DESCRIPTION "NG Alarm network trap"
::= 2000
heartbeatTrap TRAP-TYPE
ENTERPRISE microwave-radio
VARIABLES { genEquipCurrentAlarmCounter,
genEquipTrapCfgMgrCLLI
}
DESCRIPTION "NG heartbeat trap, sent once per heartbeat period"
::= 2001
-- ###########################################################
-- NG Notificatin Section (V2 V3)
-- ###########################################################
generalNGV3Trap NOTIFICATION-TYPE
OBJECTS { genEquipCurrentAlarmCounter,
genEquipCurrentAlarmRaisedTimeT,
genEquipNetworkAgentIp,
genEquipCurrentAlarmId,
genEquipCurrentAlarmDesc,
genEquipCurrentAlarmIfIndex,
genEquipCurrentAlarmInstance,
genEquipCurrentAlarmSeverity,
genEquipCurrentAlarmState,
genEquipCurrentAlarmUserText,
genEquipTrapCfgMgrCLLI,
genEquipNetworkAgentIpV6
}
STATUS current
DESCRIPTION "NG General network V3 trap"
::= { genTraps 2000 }
heartbeatNGV3Trap NOTIFICATION-TYPE
OBJECTS { genEquipCurrentAlarmCounter,
genEquipTrapCfgMgrCLLI
}
STATUS current
DESCRIPTION "NG Heartbeat v3 trap - The heartbeat trap, sent once per heartbeat period"
::= { genTraps 2001 }
END
Reference in New Issue Copy Permalink