mibs/MIBS/ciena/CIENA-CES-ACL-MIB

570 lines
21 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- This file was included in WWP MIB release 04-16-00-0047
--
-- CIENA-CES-ACL-MIB.my
--
--
CIENA-CES-ACL-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
CienaGlobalState
FROM CIENA-TC
cienaCesConfig
FROM CIENA-SMI;
cienaCesAclMIB MODULE-IDENTITY
LAST-UPDATED "201211210000Z"
ORGANIZATION "Ciena, Inc"
CONTACT-INFO
" Mib Meister
115 North Sullivan Road
Spokane Valley, WA 99037
USA
Phone: +1 509 242 9000
Email: support@ciena.com"
DESCRIPTION
"This module defines the ACL details and the
associated notifications."
REVISION "201211210000Z"
DESCRIPTION
"Created new Extended table for the ACL rules which is indexed
by both source and destination IP.
Deprecated the cienaCesAclTable.
Added new global counter for bad protocol."
REVISION "201205010000Z"
DESCRIPTION
"Initial creation."
::= { cienaCesConfig 25 }
--
-- Node definitions
--
cienaCesAclMIBObjects OBJECT IDENTIFIER ::= { cienaCesAclMIB 1 }
--
-- Acl Node
--
cienaCesAclGlobal OBJECT IDENTIFIER ::= { cienaCesAclMIBObjects 1 }
cienaCesAclRules OBJECT IDENTIFIER ::= { cienaCesAclMIBObjects 2 }
-- Conformance information
cienaCesAclMIBConformance OBJECT IDENTIFIER ::= { cienaCesAclMIB 3 }
cienaCesAclMIBCompliances OBJECT IDENTIFIER ::= { cienaCesAclMIBConformance 1 }
cienaCesAclMIBGroups OBJECT IDENTIFIER ::= { cienaCesAclMIBConformance 2 }
--
-- IP ACL Items
--
cienaCesAclAdminState OBJECT-TYPE
SYNTAX CienaGlobalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the global IP ACL state."
::= { cienaCesAclGlobal 1 }
cienaCesAclCacheHit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups satisfied by a cache hit."
::= { cienaCesAclGlobal 2 }
cienaCesAclNoHit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because the source
ip address did not match a table entry."
::= { cienaCesAclGlobal 3 }
cienaCesAclBadPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because the ingress
port was disallowed by a table entry."
::= { cienaCesAclGlobal 4 }
cienaCesAclBadDscp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by a table entry."
::= { cienaCesAclGlobal 5 }
cienaCesAclOperState OBJECT-TYPE
SYNTAX CienaGlobalState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current operational state of the IP ACL system."
::= { cienaCesAclGlobal 6 }
cienaCesAclInUseEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of IP ACL rules that are currently configured."
::= { cienaCesAclGlobal 7 }
cienaCesAclMaxEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of IP ACL rules that can be configured."
::= { cienaCesAclGlobal 8 }
cienaCesAclBadProtocol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because protocol
didn't match protocol allowed for matching src/dst subnet"
::= { cienaCesAclGlobal 9 }
--
-- IP ACL Table
--
cienaCesAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF CienaCesAclEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The (conceptual) table listing the parameters for the IP ACL table."
::= { cienaCesAclRules 1 }
cienaCesAclEntry OBJECT-TYPE
SYNTAX CienaCesAclEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry (conceptual row) in the cienaCesAclTable."
INDEX {cienaCesAclEntryInetAddrType,cienaCesAclEntryInetAddr,
cienaCesAclEntryInetPrefixLength}
::= { cienaCesAclTable 1 }
CienaCesAclEntry ::= SEQUENCE {
cienaCesAclEntryInetAddrType InetAddressType,
cienaCesAclEntryInetAddr InetAddress,
cienaCesAclEntryInetPrefixLength InetAddressPrefixLength,
cienaCesAclEntryHits Counter32,
cienaCesAclEntryBadPort Counter32,
cienaCesAclEntryDscpMask OCTET STRING,
cienaCesAclEntryBadDscp Counter32,
cienaCesAclEntryPortBitMask OCTET STRING,
cienaCesAclEntryNotifInetAddrType InetAddressType,
cienaCesAclEntryNotifInetAddr InetAddress,
cienaCesAclEntryNotifInetPrefixLength InetAddressPrefixLength
}
cienaCesAclEntryInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesAclEntryInetAddr and cienaCesAclEntryInetPrefixLength.
When representing:
ipv4 : cienaCesAclEntryInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesAclEntryInetAddr should be compliant with
InetAddressIPv6 from RFC 4001"
::= { cienaCesAclEntry 1 }
cienaCesAclEntryInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the source IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesAclEntryInetAddrType and should be compliant with RFC
4001 InetAddressType."
::= { cienaCesAclEntry 2 }
cienaCesAclEntryInetPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object indicates the prefix length for the source IP network
that will be authorized. This OID should be used in conjunction
with cienaCesAclEntryInetAddrType."
::= { cienaCesAclEntry 3 }
cienaCesAclEntryHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of lookups that matched the table entry."
::= { cienaCesAclEntry 4 }
cienaCesAclEntryBadPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of lookups that failed because the ingress
port was disallowed by the table entry."
::= { cienaCesAclEntry 5 }
cienaCesAclEntryDscpMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the DSCP values for which IP packets
are allowed to ingress. The mask is big endian and each bit,
numbered from 0 to 63, represents a DSCP value numbered from
0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all."
::= { cienaCesAclEntry 6 }
cienaCesAclEntryBadDscp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by the table entry."
::= { cienaCesAclEntry 7 }
cienaCesAclEntryPortBitMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the physical ports on which frames will
be allowed to ingress from. The mask is big endian and each bit,
numbered from 0 to 63, represents a physical port numbered from
1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all ports."
::= { cienaCesAclEntry 8 }
cienaCesAclEntryNotifInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs cienaCesAclEntryNotifInetAddr and
cienaCesAclEntryNotifInetPrefixLength.
When representing:
ipv4 : cienaCesAclEntryInetAddr should be compliant with InetAddressIPv4 from RFC 4001
ipv6 : cienaCesAclEntryInetAddr should be compliant with InetAddressIPv6 from RFC 4001"
::= { cienaCesAclEntry 9 }
cienaCesAclEntryNotifInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the IP network address that will be authorized.
This OID should be used in conjunction with cienaCesAclEntryNotifInetAddrType
and should be compliant with RFC 4001 InetAddressType."
::= { cienaCesAclEntry 10 }
cienaCesAclEntryNotifInetPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the prefix length for the IP network that will be authorized.
This OID should be used in conjunction with cienaCesAclEntryNotifInetAddrType."
::= { cienaCesAclEntry 11 }
--
-- Extended IP ACL Table
--
cienaCesExtAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF CienaCesExtAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the parameters for the
extended IP ACL table."
::= { cienaCesAclRules 2 }
cienaCesExtAclEntry OBJECT-TYPE
SYNTAX CienaCesExtAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the cienaCesExtAclTable."
INDEX {cienaCesExtAclEntrySrcInetAddrType,cienaCesExtAclEntrySrcInetAddr,
cienaCesExtAclEntrySrcInetPrefixLen,
cienaCesExtAclEntryDstInetAddrType,cienaCesExtAclEntryDstInetAddr,
cienaCesExtAclEntryDstInetPrefixLen}
::= { cienaCesExtAclTable 1 }
CienaCesExtAclEntry ::= SEQUENCE {
cienaCesExtAclEntrySrcInetAddrType InetAddressType,
cienaCesExtAclEntrySrcInetAddr InetAddress,
cienaCesExtAclEntrySrcInetPrefixLen InetAddressPrefixLength,
cienaCesExtAclEntryDstInetAddrType InetAddressType,
cienaCesExtAclEntryDstInetAddr InetAddress,
cienaCesExtAclEntryDstInetPrefixLen InetAddressPrefixLength,
cienaCesExtAclEntryNotifSrcInetAddrType InetAddressType,
cienaCesExtAclEntryNotifSrcInetAddr InetAddress,
cienaCesExtAclEntryNotifSrcInetPrefixLen InetAddressPrefixLength,
cienaCesExtAclEntryNotifDstInetAddrType InetAddressType,
cienaCesExtAclEntryNotifDstInetAddr InetAddress,
cienaCesExtAclEntryNotifDstInetPrefixLen InetAddressPrefixLength,
cienaCesExtAclEntryHits Counter32,
cienaCesExtAclEntryBadPort Counter32,
cienaCesExtAclEntryDscpMask OCTET STRING,
cienaCesExtAclEntryBadDscp Counter32,
cienaCesExtAclEntryPortBitMask OCTET STRING,
cienaCesExtAclEntryProtocol BITS,
cienaCesExtAclEntryBadProtocol Counter32
}
cienaCesExtAclEntrySrcInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntrySrcInetAddr and
cienaCesExtAclEntrySrcInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv6 from RFC 4001"
::= { cienaCesExtAclEntry 1 }
cienaCesExtAclEntrySrcInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the source IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntrySrcInetAddrType and should be compliant with RFC
4001 InetAddressType."
::= { cienaCesExtAclEntry 2 }
cienaCesExtAclEntrySrcInetPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the prefix length for the source IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExtAclEntrySrcInetAddrType."
::= { cienaCesExtAclEntry 3 }
cienaCesExtAclEntryDstInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntryDstInetAddr and
cienaCesExtAclEntryDstInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntryDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntryDstInetAddr should be compliant with
InetAddressIPv6 from RFC 4001"
::= { cienaCesExtAclEntry 4 }
cienaCesExtAclEntryDstInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the destination IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntryDstInetAddrType and should be compliant with RFC
4001 InetAddressType."
::= { cienaCesExtAclEntry 5 }
cienaCesExtAclEntryDstInetPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the prefix length for the destination IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExtAclEntryDstInetAddrType."
::= { cienaCesExtAclEntry 6 }
cienaCesExtAclEntryNotifSrcInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate of cienaCesExtAclEntrySrcInetAddrType for display purposes.
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntrySrcInetAddr and
cienaCesExtAclEntrySrcInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntrySrcInetAddr should be compliant with
InetAddressIPv6 from RFC 4001"
::= { cienaCesExtAclEntry 7 }
cienaCesExtAclEntryNotifSrcInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate of cienaCesExtAclEntrySrcInetAddr for display purposes.
This object indicates the source IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntryNotifSrcInetAddrType and should be compliant
with RFC 4001 InetAddressType."
::= { cienaCesExtAclEntry 8 }
cienaCesExtAclEntryNotifSrcInetPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate of cienaCesExtAclEntrySrcInetPrefixLen for display purposes.
This object indicates the prefix length for the source IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExtAclEntryNotifSrcInetAddrType."
::= { cienaCesExtAclEntry 9 }
cienaCesExtAclEntryNotifDstInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate of cienaCesExtAclEntryDstInetAddrType for display purposes.
This object indicates the IP network type which will be authorized.
This OID specifies the Inet address type of the OIDs
cienaCesExtAclEntryNotifDstInetAddr and
cienaCesExtAclEntryNotifDstInetPrefixLen.
When representing:
ipv4 : cienaCesExtAclEntryNotifDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesExtAclEntryNotifDstInetAddr should be compliant with
InetAddressIPv6 from RFC 4001"
::= { cienaCesExtAclEntry 10 }
cienaCesExtAclEntryNotifDstInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate of cienaCesExtAclEntryDstInetAddr for display purposes.
This object indicates the destination IP network address that will
be authorized. This OID should be used in conjunction with
cienaCesExtAclEntryNotifDstInetAddrType and should be compliant
with RFC 4001 InetAddressType."
::= { cienaCesExtAclEntry 11 }
cienaCesExtAclEntryNotifDstInetPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplicate of cienaCesExtAclEntryDstInetPrefixLen for display purposes.
This object indicates the prefix length for the destination IP network
that will be authorized. This OID should be used in conjunction
with cienaCesExtAclEntryNotifDstInetAddrType."
::= { cienaCesExtAclEntry 12 }
cienaCesExtAclEntryHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that matched the table entry."
::= { cienaCesExtAclEntry 13 }
cienaCesExtAclEntryBadPort OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because the ingress
port was disallowed by the table entry."
::= { cienaCesExtAclEntry 14 }
cienaCesExtAclEntryDscpMask OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the DSCP values for which IP packets
are allowed to ingress. The mask is big endian and each bit,
numbered from 0 to 63, represents a DSCP value numbered from
0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all."
::= { cienaCesExtAclEntry 15 }
cienaCesExtAclEntryBadDscp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because the ingress
DSCP value was disallowed by the table entry."
::= { cienaCesExtAclEntry 16 }
cienaCesExtAclEntryPortBitMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the physical ports on which frames will
be allowed to ingress from. The mask is big endian and each bit,
numbered from 0 to 63, represents a physical port numbered from
1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all
ports."
::= { cienaCesExtAclEntry 17 }
cienaCesExtAclEntryProtocol OBJECT-TYPE
SYNTAX BITS {
icmp(0),
tcp(1),
udp(2),
all(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of protocols allowed for the ACL entry."
::= { cienaCesExtAclEntry 18 }
cienaCesExtAclEntryBadProtocol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of lookups that failed because
the protocol value did't match what was in the ACL entry with IP
address(es) matching"
::= { cienaCesExtAclEntry 19 }
END