david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-AUTH-FRAMEWORK-MIB

2425 lines
78 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *********************************************************************
-- CISCO-AUTH-FRAMEWORK-MIB.my: Authentication Framework configuration
-- and information MIB
--
-- August 2008, Binh Phu Le
--
-- Copyright (c) 2008-2009, 2010, 2013 by Cisco Systems Inc.
--
-- All rights reserved.
--
-- *******************************************************************
CISCO-AUTH-FRAMEWORK-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress,
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
ifIndex,
ifName
FROM IF-MIB
VlanIndexOrZero
FROM CISCO-PRIVATE-VLAN-MIB
CnnEouPostureTokenString
FROM CISCO-NAC-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoAuthFrameworkMIB MODULE-IDENTITY
LAST-UPDATED "201308230000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-ibns@cisco.com,
cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"MIB module for Authentication Framework in the system.
Authentication Framework provides generic configurations
for authentication methods in the system and manage the
failover sequence of these methods in a flexible manner."
REVISION "201308230000Z"
DESCRIPTION
"Added notification cafAuthFailNotif.
Added new objects cafAuthFailNotifEnable and
cafAuthFailClient.
Added new groups cafAuthFailNotifGroup,
cafAuthFailNotifEnableGroup and cafAuthFailClientGroup.
A new compliance ciscoAuthFrameworkMIBCompliance4 is added
which deprecates ciscoAuthFrameworkMIBCompliance3."
REVISION "201011170000Z"
DESCRIPTION
"Added cafMacMoveConfigGroup and cafCoACommandConfigGroup
groups."
REVISION "201004010000Z"
DESCRIPTION
"Added value 'replace' to cafPortViolationAction."
REVISION "200904200000Z"
DESCRIPTION
"Added cafSessionVlanGroupNameGroup."
REVISION "200810240000Z"
DESCRIPTION
"Added value 'protect' to cafPortViolationAction."
REVISION "200808250000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 656 }
ciscoAuthFrameworkMIBNotifs OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIB 0 }
ciscoAuthFrameworkMIBObjects OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIB 1 }
ciscoAuthFrameworkMIBConform OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIB 2 }
ciscoAuthFrameworkSystem OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBObjects 1 }
ciscoAuthFrwkAuthenticator OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBObjects 2 }
ciscoAuthFrameworkEvent OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBObjects 3 }
ciscoAuthFrameworkSession OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBObjects 4 }
ciscoAuthFrwkNotifControl OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBObjects 5 }
ciscoAuthFrwkNotifInfo OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBObjects 6 }
-- Textual Conventions
CiscoAuthControlledDirections ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The controlled direction values for capable ports in
Authentication Framework.
both: control is required to be exerted over both
incoming and outgoing traffic through the
controlled port.
in : control is required to be exerted over the
incoming traffic through the controlled port."
SYNTAX INTEGER {
both(0),
in(1)
}
CiscoAuthControlledPortControl ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authorization control values of Authentication
Framework on a controlled port.
forceUnauthorized: the controlled port is forced to
be unauthorized unconditionally.
auto : authorization of the controlled
port will be determined by an
authentication process.
forceAuthorized : The controlled port is forced to
be authorized unconditionally."
SYNTAX INTEGER {
forceUnauthorized(1),
auto(2),
forceAuthorized(3)
}
CiscoAuthMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authentication methods and protocols supported in
Authentication Framework.
other : none of the below.
dot1x : 802.1x Protocol.
macAuthBypass: MAC Authentication Bypass.
webAuth : Web-Proxy Authentication.
'other' is a read only value which can not be used in
set operation."
SYNTAX INTEGER {
other(1),
dot1x(2),
macAuthBypass(3),
webAuth(4)
}
CiscoAuthMethodList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The list of authentication methods provided within
Authentication Framework.
Each octet represents an authentication method which
is defined in CiscoAuthMethod.
The DESCRIPTION clause of CiscoAuthMethodList objects
must fully describe the relationship between methods."
SYNTAX OCTET STRING
CiscoAuthHostMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authentication mode of a controlled port.
singleHost: port allows one host to connect and authenticate
in a single domain.
multiHost : port allows multiple hosts to connect. Once
a host is authenticated, all remaining hosts are
also authenticated in a single domain.
multiAuth : port allows multiple hosts to connect. Each host
is authenticated separately in a single domain.
multiDomain: port allows multiple domains to be authenticated."
SYNTAX INTEGER {
singleHost(1),
multiHost(2),
multiAuth(3),
multiDomain(4)
}
-- ciscoAuthFrameworkSystem
cafAaaNoRespRecoveryDelay OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the AAA recovery delay for authentication methods
registered in Authentication Framework when AAA server becomes
active again after being inactive. A value of zero indicates
that AAA recovery delay is disabled in the system."
::= { ciscoAuthFrameworkSystem 1 }
cafAuthMethodRegTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafAuthMethodRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of authentication methods which are currrently
registered with Authentication Framework.
An entry is created by the agent when an authentication method
has successfully registered with Authentication Framework.
An entry is deleted by the agent upon de-registration of the
authentication method."
::= { ciscoAuthFrameworkSystem 2 }
cafAuthMethodRegEntry OBJECT-TYPE
SYNTAX CafAuthMethodRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing registration information of a particular
authentication method with Authentication Framework."
INDEX { cafAuthMethod }
::= { cafAuthMethodRegTable 1 }
CafAuthMethodRegEntry ::= SEQUENCE {
cafAuthMethod CiscoAuthMethod,
cafAuthMethodDefaultPriority Unsigned32,
cafAuthMethodDefaultExecOrder Unsigned32
}
cafAuthMethod OBJECT-TYPE
SYNTAX CiscoAuthMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The authentication method registered with Authentication
Framework."
::= { cafAuthMethodRegEntry 1 }
cafAuthMethodDefaultPriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique number which indicates the default priority of a
authentication method.
The default priority is assigned by Authentication Framework
during method registration. The method with smallest value
has highest priority."
::= { cafAuthMethodRegEntry 2 }
cafAuthMethodDefaultExecOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique number which indicates the default execution order
of a authentication method.
The default execution order is assigned by Authentication
Framework during method registration. The method with
smallest value will be execute first."
::= { cafAuthMethodRegEntry 3 }
cafMacMoveMode OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the MAC Move configuration for
Authentication Framework.
deny : When a host is authenticated on one port,
that address is not allowed on another
authenticated manager-enabled port of the device.
permit: Authenticated hosts are allowed to move from one
port to another on the same device. When a host moves to
a new port, the authenticated session on the original
port is deleted, and the host is reauthenticated on the
new port."
::= { ciscoAuthFrameworkSystem 3 }
cafCoABouncePortCommandIgnoreEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the device ignores the bounce
port command that sent from RADIUS via Change-of-Authorization
(CoA) packets."
::= { ciscoAuthFrameworkSystem 4 }
cafCoADisablePortCommandIgnoreEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the device ingores the
disable port command that sent from RADIUS via
Change-of-Authorization (CoA) packets."
::= { ciscoAuthFrameworkSystem 5 }
-- ciscoAuthFrwkAuthenticator
cafPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port entries. An entry will exist for each
interface which support Authentication Framework feature."
::= { ciscoAuthFrwkAuthenticator 1 }
cafPortConfigEntry OBJECT-TYPE
SYNTAX CafPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information of Authentication
Framework applicable to a particular port."
INDEX { ifIndex }
::= { cafPortConfigTable 1 }
CafPortConfigEntry ::= SEQUENCE {
cafPortControlledDirection CiscoAuthControlledDirections,
cafPortFallBackProfile SnmpAdminString,
cafPortAuthHostMode CiscoAuthHostMode,
cafPortPreAuthOpenAccess TruthValue,
cafPortAuthorizeControl CiscoAuthControlledPortControl,
cafPortReauthEnabled TruthValue,
cafPortReauthInterval Unsigned32,
cafPortRestartInterval Unsigned32,
cafPortInactivityTimeout Integer32,
cafPortViolationAction INTEGER
}
cafPortControlledDirection OBJECT-TYPE
SYNTAX CiscoAuthControlledDirections
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the controlled direction of this port."
::= { cafPortConfigEntry 1 }
cafPortFallBackProfile OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the name of the fallback profile to be used when
failing over to Web Proxy Authentication. A zero length
string indicates that fallback mechanism to Web Proxy
Authentication is disabled in Authentication Framework."
::= { cafPortConfigEntry 2 }
cafPortAuthHostMode OBJECT-TYPE
SYNTAX CiscoAuthHostMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the authentication host mode for this port."
::= { cafPortConfigEntry 3 }
cafPortPreAuthOpenAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if the Pre-Authentication Open Access feature
allows clients/devices to gain network access before
authentication is performed.
A value of 'true' for this object indicates that client/device
is able to gain network access before authentication is
performed."
::= { cafPortConfigEntry 4 }
cafPortAuthorizeControl OBJECT-TYPE
SYNTAX CiscoAuthControlledPortControl
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the authorization control for this port."
::= { cafPortConfigEntry 5 }
cafPortReauthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if reauthentication is enabled for this port."
::= { cafPortConfigEntry 6 }
cafPortReauthInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the reauthentication interval, after which the port
will be reauthenticated if value of the corresponding instance
of cafPortReauthEnabled is 'true'.
A value of zero indicates that the reauthentication interval
is downloaded from AAA server when this port is authenticated."
::= { cafPortConfigEntry 7 }
cafPortRestartInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval after which a further authentication
attempt should be made to this port if it is not authorized.
A value of zero indicates that no further authentication attempt
will be made if this port is unauthorized."
::= { cafPortConfigEntry 8 }
cafPortInactivityTimeout OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the period of time that a client associating with
this
port is allowed to be inactive before being terminated.
A value of zero indicates that inactivity timeout is disabled on
this port.
A value of -1 indicates that inactivity timeout is downloaded
from the AAA server when this port is authenticated."
::= { cafPortConfigEntry 9 }
cafPortViolationAction OBJECT-TYPE
SYNTAX INTEGER {
restrict(1),
shutdown(2),
protect(3),
replace(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the action to be taken due to a security violation
occurs on this port.
restrict: This port will be moved to restricted state.
shutdown: This port will be shutdown from Authentication
Framework perspective.
protect : This port will be moved to protected state.
replace : The current authentication session on this
port will be terminated and replaced by a new
authentication session, upon the detection of
security violation on the current authentication
session on the port."
::= { cafPortConfigEntry 10 }
cafPortMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafPortMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of port entries. An entry will exist
for each port which supports Authentication Framework feature."
::= { ciscoAuthFrwkAuthenticator 2 }
cafPortMethodEntry OBJECT-TYPE
SYNTAX CafPortMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing configuration and information of
authentication methods for a particular port."
INDEX { ifIndex }
::= { cafPortMethodTable 1 }
CafPortMethodEntry ::= SEQUENCE {
cafPortMethodAdminExecOrder CiscoAuthMethodList,
cafPortMethodAdminPriority CiscoAuthMethodList,
cafPortMethodAvailable CiscoAuthMethodList,
cafPortMethodOperExecOrder CiscoAuthMethodList,
cafPortMethodOperPriority CiscoAuthMethodList
}
cafPortMethodAdminExecOrder OBJECT-TYPE
SYNTAX CiscoAuthMethodList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the administrative execution order of
authentication methods on the port. Methods are executed in
the order as specified in the method list.
Method which is at the beginning of the method list will be
executed first. Method which is at the end of method list
will be executed last.
A zero length string of this object indicates that no per
port execution order configuration has been specified on
this port. The actual execution order is based on the value
of cafAuthMethodDefaultExecOrder in cafAuthMethodRegTable."
::= { cafPortMethodEntry 1 }
cafPortMethodAdminPriority OBJECT-TYPE
SYNTAX CiscoAuthMethodList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the administrative priority of
authentication methods on the port. The priority of
each method is assigned based on the method list.
Method which is at the beginning of the method list has
highest priority. Method which is at the end of method list
has lowest priority.
A zero length string of this object indicates that no per
port method priority configuration has been specified on
this port. The actual execution order is based on the value
of cafAuthMethodDefaultExecOrder in cafAuthMethodRegTable."
::= { cafPortMethodEntry 2 }
cafPortMethodAvailable OBJECT-TYPE
SYNTAX CiscoAuthMethodList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the authentication methods currently
available on this port."
::= { cafPortMethodEntry 3 }
cafPortMethodOperExecOrder OBJECT-TYPE
SYNTAX CiscoAuthMethodList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational execution order of
authentication methods on this port. Methods are executed in
the order as specified in the method list.
Method which is at the beginning of the method list will be
executed first. Method which is at the end of method list
will be executed last."
::= { cafPortMethodEntry 4 }
cafPortMethodOperPriority OBJECT-TYPE
SYNTAX CiscoAuthMethodList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational priority of
authentication methods on this port. Methods have the
priority as specified in the method list.
Method which is at the beginning of the method list has
highest priority. Method which is at the end of method list
has lowest priority."
::= { cafPortMethodEntry 5 }
-- ciscoAuthFrameworkEvent
cafAuthFailedEventPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafAuthFailedEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of port entries.
An entry will exist for each port which supports Authentication
Fail event within the Authentication Framework."
::= { ciscoAuthFrameworkEvent 1 }
cafAuthFailedEventPortEntry OBJECT-TYPE
SYNTAX CafAuthFailedEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing management information of Authentication
Fail event for a particular port."
INDEX { ifIndex }
::= { cafAuthFailedEventPortTable 1 }
CafAuthFailedEventPortEntry ::= SEQUENCE {
cafAuthFailedMaxRetry Unsigned32,
cafAuthFailedNoActionEnabled TruthValue,
cafAuthFailedAuthorizedVlan Integer32,
cafAuthFailedNextMethodEnabled TruthValue
}
cafAuthFailedMaxRetry OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of retry should be
performed before generating Authentication Fail event.
A value of zero indicates that Authentication Fail event will
be generated upon authentication fail without any retry."
::= { cafAuthFailedEventPortEntry 1 }
cafAuthFailedNoActionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether no action will be performed
when an Authentication Fail event occurs.
Setting 'true' on this object indicates that no action will
be performed when Authentication Fail event occurs.
The read-only value 'false' indicates that an action will
be performed when an Authentication Fail event occurs."
::= { cafAuthFailedEventPortEntry 2 }
cafAuthFailedAuthorizedVlan OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Authentication Failed VLAN number.
The read-only value of -1 indicates that this object is not
applicable on this port.
The read-only value of zero indicates that this port will not be
authorized to any VLAN when Authentication Failed event occurs.
Setting a non-zero value on this object indicates that this port
will be authorized to the VLAN as specified by this object
value, when Authentication Fail event occurs."
::= { cafAuthFailedEventPortEntry 3 }
cafAuthFailedNextMethodEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the next authentication method
will be used if an Authentication Fail event is generated by the
current authentication method.
Setting this object to 'true' indicates that the next available
authentication method will be used when Authentication Fail
event occurs.
The read-only value 'false' indicates that the next available
authentication method will not be used when Authentication Fail
event occurs."
::= { cafAuthFailedEventPortEntry 4 }
cafSecurityViolationClient OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address included in the notification currently being
sent, indicating the client who triggered the security violation
notification."
::= { ciscoAuthFrwkNotifInfo 1 }
cafAuthFailClient OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The MAC address included in the cafAuthFailNotif being
sent, indicating the client which failed to authenticate."
::= { ciscoAuthFrwkNotifInfo 2 }
cafClientNoRespEventPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafClientNoRespEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of port entries.
An entry exists for each port which supports No Response
event within the Authentication Framework."
::= { ciscoAuthFrameworkEvent 2 }
cafClientNoRespEventPortEntry OBJECT-TYPE
SYNTAX CafClientNoRespEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing management information of No Response
event for a particular port."
INDEX { ifIndex }
::= { cafClientNoRespEventPortTable 1 }
CafClientNoRespEventPortEntry ::= SEQUENCE {
cafClientNoRespNoActionEnabled TruthValue,
cafClientNoRespAuthorizedVlan Integer32
}
cafClientNoRespNoActionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether an action is performed when No
Response event occurs.
Setting 'true' on this object indicates that no action will
be performed when No Response event occurs.
The read-only value 'false' of this object indicates that an
action will be performed when No Response event occurs."
::= { cafClientNoRespEventPortEntry 1 }
cafClientNoRespAuthorizedVlan OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the No Response Authorized VLAN number.
The read-only value of -1 indicates that this object is not
applicable on this port.
The read-only value of zero indicates that this port will not be
authorized to any VLAN when No Response event occurs.
Setting a non-zero value on this object indicates that this port
will be authorized to the VLAN as specified by this object
value, when No Response event occurs."
::= { cafClientNoRespEventPortEntry 2 }
cafServerEventPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafServerEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of port entries.
An entry exists for each port which supports AAA Server
Reachability event within the Authentication Framework."
::= { ciscoAuthFrameworkEvent 3 }
cafServerEventPortEntry OBJECT-TYPE
SYNTAX CafServerEventPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing management information of AAA Server
Reachability event for a particular port."
INDEX { ifIndex }
::= { cafServerEventPortTable 1 }
CafServerEventPortEntry ::= SEQUENCE {
cafServerDeadNoActionEnabled TruthValue,
cafServerDeadRemainAuthorized TruthValue,
cafServerDeadAuthorizedVlan Integer32,
cafServerAliveAction INTEGER
}
cafServerDeadNoActionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether an action is performed if an
AAA Server Reachability event occurs.
Setting 'true' on this object indicates that no action
will be performed when AAA Server Reachability event occurs.
The read-only value 'false' indicates that an action will
be performed when AAA Server Reachability event occurs."
::= { cafServerEventPortEntry 1 }
cafServerDeadRemainAuthorized OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if current authorization will remain
unchanged for the port when AAA Server Reachability event
occurs.
Setting 'true' on this object indicates that current
authorization will remain unchanged for the port when AAA
Server Reachability event occurs.
The read-only value 'false' indicates that the current
authorization will not be retained for the port when
AAA Server Reachability event occurs."
::= { cafServerEventPortEntry 2 }
cafServerDeadAuthorizedVlan OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AAA Server Reachability
Authorized VLAN number.
The read-only value of -1 indicates that this object is not
applicable on this port.
The read-only value of zero indicates that this port will not
be authorized to any VLAN when AAA Server Reachability event
occurs.
Setting a non-zero value on this object indicates that this port
will be authorized to the VLAN as specified by this object
value, when AAA Server Reachability event occurs."
::= { cafServerEventPortEntry 3 }
cafServerAliveAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
reinitialize(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the action applied to the port upon AAA
recovery.
none : no action will be applied.
reinitialize: the port will be reinitialized with the current
authentication method."
::= { cafServerEventPortEntry 4 }
-- ciscoAuthFrameworkSession
cafSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of authentication session.
An entry is created when an authentication session has
successfully created within Authentication Framework.
An entry is deleted when an authentication session has been
removed."
::= { ciscoAuthFrameworkSession 1 }
cafSessionEntry OBJECT-TYPE
SYNTAX CafSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing management information for a particular
authentication session."
INDEX {
ifIndex,
IMPLIED cafSessionId
}
::= { cafSessionTable 1 }
CafSessionEntry ::= SEQUENCE {
cafSessionId OCTET STRING,
cafSessionClientMacAddress MacAddress,
cafSessionClientAddrType InetAddressType,
cafSessionClientAddress InetAddress,
cafSessionStatus INTEGER,
cafSessionDomain INTEGER,
cafSessionAuthHostMode CiscoAuthHostMode,
cafSessionControlledDirection CiscoAuthControlledDirections,
cafSessionPostureToken CnnEouPostureTokenString,
cafSessionAuthUserName SnmpAdminString,
cafSessionClientFramedIpPool SnmpAdminString,
cafSessionAuthorizedBy SnmpAdminString,
cafSessionCriticalTimeLeft Unsigned32,
cafSessionAuthVlan VlanIndexOrZero,
cafSessionTimeout Unsigned32,
cafSessionTimeLeft Unsigned32,
cafSessionTimeoutAction INTEGER,
cafSessionInactivityTimeout Unsigned32,
cafSessionInactivityTimeLeft Unsigned32,
cafSessionReauth TruthValue,
cafSessionTerminate TruthValue,
cafSessionVlanGroupName SnmpAdminString
}
cafSessionId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier of the authentication session."
::= { cafSessionEntry 1 }
cafSessionClientMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the MAC address of the device associates with the
authentication session."
::= { cafSessionEntry 2 }
cafSessionClientAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of Internet address of the client
associates with the authentication session."
::= { cafSessionEntry 3 }
cafSessionClientAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the Internet address of the client associates with
the authentication session. The type of this address is
determined by the value of cafSessionClientAddrType object."
::= { cafSessionEntry 4 }
cafSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
running(2),
noMethod(3),
authenticationSuccess(4),
authenticationFailed(5),
authorizationSuccess(6),
authorizationFailed(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of the authentication session.
idle : the session has been initialized and no
method has run yet.
running : an authentication method is running for
this session.
noMethod : no authentication method has provided a
result for this session.
authenticationSuccess: an authentication method has resulted
in authentication success for this session.
authenticationFailed: an authentication method has resulted
in authentication failed for this session.
authorizationSuccess: authorization is successful for this
session.
authorizationFailed : authorization is failed for this
session."
::= { cafSessionEntry 5 }
cafSessionDomain OBJECT-TYPE
SYNTAX INTEGER {
other(1),
data(2),
voice(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of domain that the authentication session
belongs to.
other : none of the below.
data : indicates the data domain.
voice: indicates the voice domain."
::= { cafSessionEntry 6 }
cafSessionAuthHostMode OBJECT-TYPE
SYNTAX CiscoAuthHostMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the authentication host mode of the port in the
authentication session."
::= { cafSessionEntry 7 }
cafSessionControlledDirection OBJECT-TYPE
SYNTAX CiscoAuthControlledDirections
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operational controlled directions parameter
for this port in the authentication session."
::= { cafSessionEntry 8 }
cafSessionPostureToken OBJECT-TYPE
SYNTAX CnnEouPostureTokenString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the posture token associates with the authentication
session."
::= { cafSessionEntry 9 }
cafSessionAuthUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the authenticated user for the
authentication session."
::= { cafSessionEntry 10 }
cafSessionClientFramedIpPool OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the address pool from which the
session's client IP address is assigned."
::= { cafSessionEntry 11 }
cafSessionAuthorizedBy OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the feature which authorizes the
authentication session."
::= { cafSessionEntry 12 }
cafSessionCriticalTimeLeft OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the leftover time before the next authentication
attempt for the authentication session after Server Reachability
event occurred. Value zero indicates that this session is
currently being authenticated or it is not applicable."
::= { cafSessionEntry 13 }
cafSessionAuthVlan OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the authorized VLAN applied to the authentication
session. Value zero indicates that no authorized VLAN has been
applied, or it is not applicable."
::= { cafSessionEntry 14 }
cafSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the session timeout used by Authentication
Framework in the authentication session."
::= { cafSessionEntry 15 }
cafSessionTimeLeft OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the leftover time of the current authentication
session."
::= { cafSessionEntry 16 }
cafSessionTimeoutAction OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
terminate(2),
reauthenticate(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the timeout action on the authentication session,
when value of the corresponding instance of cafSessionTimeLeft
reaches zero.
unknown : None of the below.
terminate : Session will be terminated.
reauthenticate: Session will be reauthenticated."
::= { cafSessionEntry 17 }
cafSessionInactivityTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the inactivity timeout used by Authentication
Framework in the authentication session."
::= { cafSessionEntry 18 }
cafSessionInactivityTimeLeft OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the leftover time of the inactivity timer of
the authentication session."
::= { cafSessionEntry 19 }
cafSessionReauth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reauthentication control for the authentication session.
Setting this object to 'true' cause the current authenticated
session to reauthenticate the authenticated client. Setting
this object to 'false' has no effect.
This object always returns 'false' when being read."
::= { cafSessionEntry 20 }
cafSessionTerminate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The termination request control for the authentication session.
Setting this object to 'true' terminates the current session.
Setting this object to 'false' has no effect.
This object always returns 'false' when being read."
::= { cafSessionEntry 21 }
cafSessionVlanGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the VLAN group that has been used during VLAN
assignment for this session.
A zero length string indicates that there is no VLAN group been
used during VLAN assignment."
::= { cafSessionEntry 22 }
cafSessionMethodsInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CafSessionMethodsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains a list of authentication method for every
authentication session.
An entry exists for each authentication method that can
authenticate an authentication session within
Authentication Framework."
::= { ciscoAuthFrameworkSession 2 }
cafSessionMethodsInfoEntry OBJECT-TYPE
SYNTAX CafSessionMethodsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing method information for a particular runnable
authentication methods which is associated with a session for
an Authentication Framework managed port."
INDEX {
ifIndex,
cafSessionId,
cafSessionMethod
}
::= { cafSessionMethodsInfoTable 1 }
CafSessionMethodsInfoEntry ::= SEQUENCE {
cafSessionMethod CiscoAuthMethod,
cafSessionMethodState INTEGER
}
cafSessionMethod OBJECT-TYPE
SYNTAX CiscoAuthMethod
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates this authentication method."
::= { cafSessionMethodsInfoEntry 1 }
cafSessionMethodState OBJECT-TYPE
SYNTAX INTEGER {
notRun(1),
running(2),
failedOver(3),
authcSuccess(4),
authcFailed(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of this authentication method.
notRun : The method has not run for this session.
running : The method is running for this session.
failedOver : The method has failed and the next method is
expected to provide a result.
authcSuccess: The method has provided a successful
authentication result for this session.
authcFailed : The method has provided a failed authentication
result for this session."
::= { cafSessionMethodsInfoEntry 2 }
-- Notifications and notification controls
cafSecurityViolationNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces
the cafSecurityViolationNotif.
A 'false' value will prevent cafSecurityViolationNotif
from being generated by this system."
::= { ciscoAuthFrwkNotifControl 1 }
cafAuthFailNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system produces
the cafAuthFailNotif.
A 'true' value will cause cafAuthFailNotif to be generated by
this system when an authentication failure happens.
A 'false' value will prevent cafAuthFailNotif
from being generated by this system."
::= { ciscoAuthFrwkNotifControl 2 }
cafSecurityViolationNotif NOTIFICATION-TYPE
OBJECTS {
ifIndex,
ifName,
cafSecurityViolationClient
}
STATUS current
DESCRIPTION
"A cafSecurityViolationNotif is sent if a security violation
is detected on a port, and the instance value of
cafSecurityViolationNotifEnable is 'true'."
::= { ciscoAuthFrameworkMIBNotifs 1 }
cafAuthFailNotif NOTIFICATION-TYPE
OBJECTS {
ifName,
cafAuthFailClient
}
STATUS current
DESCRIPTION
"A cafAuthFailNotif is sent if an authentication failure is
detected on a port, and the instance value of
cafAuthFailNotifEnable is 'true'.
ifName contains the name of the interface where the
authentication failure happened.
cafAuthFailClient contains the mac address of the client which
failed to authenticate."
::= { ciscoAuthFrameworkMIBNotifs 2 }
-- Conformance
ciscoAuthFrameworkMIBCompliances OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBConform 1 }
ciscoAuthFrameworkMIBGroups OBJECT IDENTIFIER
::= { ciscoAuthFrameworkMIBConform 2 }
ciscoAuthFrameworkMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
CISCO-AUTH-FRAMEWORK-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cafAuthMethodRegGroup,
cafAuthPortConfigGroup,
cafPortMethodGroup,
cafSessionGroup,
cafSessionMethodInfoGroup
}
GROUP cafAaaNoRespRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide AAA recovery delay configuration for Authentication
Framework."
GROUP cafAuthFailedEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on its
capable ports, when Authentication Fail event occurs."
GROUP cafClientNoRespEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework to authorize
ports in a special VLAN when non-capable clients are
detected."
GROUP cafServerEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on
authenticated ports when AAA Server Reachability event occurs."
GROUP cafSecViolationNotifEnableGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationNotifGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationClientGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
OBJECT cafAaaNoRespRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortControlledDirection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortFallBackProfile
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthHostMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortPreAuthOpenAccess
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthorizeControl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortRestartInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortInactivityTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortViolationAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminExecOrder
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedMaxRetry
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNextMethodEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadRemainAuthorized
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerAliveAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionReauth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionTerminate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSecurityViolationNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoAuthFrameworkMIBCompliances 1 }
ciscoAuthFrameworkMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
CISCO-AUTH-FRAMEWORK-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cafAuthMethodRegGroup,
cafAuthPortConfigGroup,
cafPortMethodGroup,
cafSessionGroup,
cafSessionMethodInfoGroup
}
GROUP cafAaaNoRespRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide AAA recovery delay configuration for Authentication
Framework."
GROUP cafAuthFailedEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on its
capable ports, when Authentication Fail event occurs."
GROUP cafClientNoRespEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework to authorize
ports in a special VLAN when non-capable clients are
detected."
GROUP cafServerEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on
authenticated ports when AAA Server Reachability event occurs."
GROUP cafSecViolationNotifEnableGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationNotifGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationClientGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSessionVlanGroupNameGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide VLAN group information for Authentication
Framework."
OBJECT cafAaaNoRespRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortControlledDirection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortFallBackProfile
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthHostMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortPreAuthOpenAccess
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthorizeControl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortRestartInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortInactivityTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortViolationAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminExecOrder
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedMaxRetry
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNextMethodEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadRemainAuthorized
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerAliveAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionReauth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionTerminate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSecurityViolationNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoAuthFrameworkMIBCompliances 2 }
ciscoAuthFrameworkMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
CISCO-AUTH-FRAMEWORK-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cafAuthMethodRegGroup,
cafAuthPortConfigGroup,
cafPortMethodGroup,
cafSessionGroup,
cafSessionMethodInfoGroup
}
GROUP cafAaaNoRespRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide AAA recovery delay configuration for Authentication
Framework."
GROUP cafAuthFailedEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on its
capable ports, when Authentication Fail event occurs."
GROUP cafClientNoRespEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework to authorize
ports in a special VLAN when non-capable clients are
detected."
GROUP cafServerEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on
authenticated ports when AAA Server Reachability event occurs."
GROUP cafSecViolationNotifEnableGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationNotifGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationClientGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSessionVlanGroupNameGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide VLAN group information for Authentication
Framework."
GROUP cafMacMoveConfigGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide MAC move configuration for Authentication Framework."
GROUP cafCoACommandConfigGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for behavor for CoA commands for
Authentication Framework."
OBJECT cafAaaNoRespRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortControlledDirection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortFallBackProfile
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthHostMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortPreAuthOpenAccess
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthorizeControl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortRestartInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortInactivityTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortViolationAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminExecOrder
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedMaxRetry
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNextMethodEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadRemainAuthorized
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerAliveAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionReauth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionTerminate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSecurityViolationNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafMacMoveMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafCoABouncePortCommandIgnoreEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafCoADisablePortCommandIgnoreEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoAuthFrameworkMIBCompliances 3 }
ciscoAuthFrameworkMIBCompliance4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
CISCO-AUTH-FRAMEWORK-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cafAuthMethodRegGroup,
cafAuthPortConfigGroup,
cafPortMethodGroup,
cafSessionGroup,
cafSessionMethodInfoGroup
}
GROUP cafAaaNoRespRecoveryDelayGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide AAA recovery delay configuration for Authentication
Framework."
GROUP cafAuthFailedEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on its
capable ports, when Authentication Fail event occurs."
GROUP cafClientNoRespEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework to authorize
ports in a special VLAN when non-capable clients are
detected."
GROUP cafServerEventGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for Authentication Framework on
authenticated ports when AAA Server Reachability event occurs."
GROUP cafSecViolationNotifEnableGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationNotifGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSecurityViolationClientGroup
DESCRIPTION
"This group is mandatory in devices running software which
support security violation notification for Authentication
Framework."
GROUP cafSessionVlanGroupNameGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide VLAN group information for Authentication
Framework."
GROUP cafMacMoveConfigGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide MAC move configuration for Authentication Framework."
GROUP cafCoACommandConfigGroup
DESCRIPTION
"This group is mandatory in devices running software which
provide configuration for behavor for CoA commands for
Authentication Framework."
GROUP cafAuthFailNotifGroup
DESCRIPTION
"This group is mandatory in devices running software which
support authentication failure notification for Authentication
Framework."
GROUP cafAuthFailNotifEnableGroup
DESCRIPTION
"This group is mandatory in devices running software which
support authentication failure notification for Authentication
Framework."
GROUP cafAuthFailClientGroup
DESCRIPTION
"This group is mandatory in devices running software which
support authentication failure notification for Authentication
Framework."
OBJECT cafAaaNoRespRecoveryDelay
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortControlledDirection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortFallBackProfile
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthHostMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortPreAuthOpenAccess
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortAuthorizeControl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortReauthInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortRestartInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortInactivityTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortViolationAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminExecOrder
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafPortMethodAdminPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedMaxRetry
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafAuthFailedNextMethodEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafClientNoRespAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadNoActionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadRemainAuthorized
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerDeadAuthorizedVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafServerAliveAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionReauth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSessionTerminate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafSecurityViolationNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafMacMoveMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafCoABouncePortCommandIgnoreEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cafCoADisablePortCommandIgnoreEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoAuthFrameworkMIBCompliances 4 }
-- Units of Conformance
cafAuthMethodRegGroup OBJECT-GROUP
OBJECTS {
cafAuthMethodDefaultPriority,
cafAuthMethodDefaultExecOrder
}
STATUS current
DESCRIPTION
"A collection of objects that provides registration
information of authentication methods in Authentication
Framework."
::= { ciscoAuthFrameworkMIBGroups 1 }
cafAaaNoRespRecoveryDelayGroup OBJECT-GROUP
OBJECTS { cafAaaNoRespRecoveryDelay }
STATUS current
DESCRIPTION
"A collection of objects that provides AAA recovery delay
configuration for Authentication Framework in the system."
::= { ciscoAuthFrameworkMIBGroups 2 }
cafAuthPortConfigGroup OBJECT-GROUP
OBJECTS {
cafPortControlledDirection,
cafPortFallBackProfile,
cafPortAuthHostMode,
cafPortPreAuthOpenAccess,
cafPortAuthorizeControl,
cafPortReauthEnabled,
cafPortReauthInterval,
cafPortRestartInterval,
cafPortInactivityTimeout,
cafPortViolationAction
}
STATUS current
DESCRIPTION
"A collection of objects that provides configuration of
Authentication Framework for capable ports in the system."
::= { ciscoAuthFrameworkMIBGroups 3 }
cafPortMethodGroup OBJECT-GROUP
OBJECTS {
cafPortMethodAdminExecOrder,
cafPortMethodAdminPriority,
cafPortMethodAvailable,
cafPortMethodOperExecOrder,
cafPortMethodOperPriority
}
STATUS current
DESCRIPTION
"A collection of objects that provides configuration and
information of authentication methods within Authentication
Framework for capable ports in the system."
::= { ciscoAuthFrameworkMIBGroups 4 }
cafAuthFailedEventGroup OBJECT-GROUP
OBJECTS {
cafAuthFailedMaxRetry,
cafAuthFailedNoActionEnabled,
cafAuthFailedAuthorizedVlan,
cafAuthFailedNextMethodEnabled
}
STATUS current
DESCRIPTION
"A collection of objects that provides configuration of
Auth-Failed behaviour of Authentication Framework for
ports in the system."
::= { ciscoAuthFrameworkMIBGroups 5 }
cafClientNoRespEventGroup OBJECT-GROUP
OBJECTS {
cafClientNoRespNoActionEnabled,
cafClientNoRespAuthorizedVlan
}
STATUS current
DESCRIPTION
"A collection of objects that provides configuration of
Authentication Framework when no-responsive client is detected
on a port in the system."
::= { ciscoAuthFrameworkMIBGroups 6 }
cafServerEventGroup OBJECT-GROUP
OBJECTS {
cafServerDeadNoActionEnabled,
cafServerDeadRemainAuthorized,
cafServerDeadAuthorizedVlan,
cafServerAliveAction
}
STATUS current
DESCRIPTION
"A collection of objects that provides configuration of
Authentication Framework when AAA Server Reachability event
occurs."
::= { ciscoAuthFrameworkMIBGroups 7 }
cafSessionGroup OBJECT-GROUP
OBJECTS {
cafSessionClientMacAddress,
cafSessionClientAddrType,
cafSessionClientAddress,
cafSessionDomain,
cafSessionStatus,
cafSessionAuthHostMode,
cafSessionControlledDirection,
cafSessionPostureToken,
cafSessionAuthUserName,
cafSessionClientFramedIpPool,
cafSessionAuthorizedBy,
cafSessionCriticalTimeLeft,
cafSessionAuthVlan,
cafSessionTimeout,
cafSessionTimeLeft,
cafSessionTimeoutAction,
cafSessionInactivityTimeout,
cafSessionInactivityTimeLeft,
cafSessionReauth,
cafSessionTerminate
}
STATUS current
DESCRIPTION
"A collection of objects that provides authentication session
management information for Authentication Framework."
::= { ciscoAuthFrameworkMIBGroups 8 }
cafSessionMethodInfoGroup OBJECT-GROUP
OBJECTS { cafSessionMethodState }
STATUS current
DESCRIPTION
"A collection of objects that provides information about
authentication methods associate with Authentication Framework
's authentication sessions in the system."
::= { ciscoAuthFrameworkMIBGroups 9 }
cafSecViolationNotifEnableGroup OBJECT-GROUP
OBJECTS { cafSecurityViolationNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects that provides control over
security violation notification for Authentication
Framework in the system."
::= { ciscoAuthFrameworkMIBGroups 10 }
cafSecurityViolationNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cafSecurityViolationNotif }
STATUS current
DESCRIPTION
"A collection of notification providing information
about port's security violation in Authentication
Framework."
::= { ciscoAuthFrameworkMIBGroups 11 }
cafSecurityViolationClientGroup OBJECT-GROUP
OBJECTS { cafSecurityViolationClient }
STATUS current
DESCRIPTION
"A collection of objects providing MAC address of the offending
client in the security violation notification."
::= { ciscoAuthFrameworkMIBGroups 12 }
cafSessionVlanGroupNameGroup OBJECT-GROUP
OBJECTS { cafSessionVlanGroupName }
STATUS current
DESCRIPTION
"A collection of objects providing VLAN group information of
authenticated session in Authentication Framework."
::= { ciscoAuthFrameworkMIBGroups 13 }
cafMacMoveConfigGroup OBJECT-GROUP
OBJECTS { cafMacMoveMode }
STATUS current
DESCRIPTION
"A collection of objects providing MAC move cofiguration
information for Authentication Framework on the device."
::= { ciscoAuthFrameworkMIBGroups 14 }
cafCoACommandConfigGroup OBJECT-GROUP
OBJECTS {
cafCoABouncePortCommandIgnoreEnabled,
cafCoADisablePortCommandIgnoreEnabled
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration information
for the device's behaviour on CoA commands."
::= { ciscoAuthFrameworkMIBGroups 15 }
cafAuthFailNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { cafAuthFailNotif }
STATUS current
DESCRIPTION
"A collection of notification providing information
about port's authentication failure in Authentication
Framework."
::= { ciscoAuthFrameworkMIBGroups 16 }
cafAuthFailNotifEnableGroup OBJECT-GROUP
OBJECTS { cafAuthFailNotifEnable }
STATUS current
DESCRIPTION
"A collection of objects that provides control over
authentication failure notification for Authentication
Framework in the system."
::= { ciscoAuthFrameworkMIBGroups 17 }
cafAuthFailClientGroup OBJECT-GROUP
OBJECTS { cafAuthFailClient }
STATUS current
DESCRIPTION
"A collection of objects providing MAC address of the failed
client in the authentication failure notification."
::= { ciscoAuthFrameworkMIBGroups 18 }
END
Reference in New Issue Copy Permalink