david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-CDP-MIB

997 lines
35 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-CDP-MIB.mib: CDP MIB file
--
-- Oct 1994, Arun Sastry
-- November 2001, Edward Pham
-- July 2004, Arvind Parthasarathy
-- March 2005, Praveen k Arora
-- March 2005, Karthikeyan Veerapandian
-- Copyright (c) 1994-1998, 1999, 2001, 2004, 2005 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--
CISCO-CDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue, DisplayString, TimeStamp
FROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI
CiscoNetworkProtocol, CiscoNetworkAddress
FROM CISCO-TC
-- VlanIndex
-- FROM CISCO-VTP-MIB
-- 19-Nov-08 Changed by RevitalR: to allow vlanid of range 1-4095 as in Pirouette project.
VlanIndex
FROM Q-BRIDGE-MIB
ifIndex
FROM IF-MIB
;
ciscoCdpMIB MODULE-IDENTITY
LAST-UPDATED "200503210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: 170 West Tasman Drive
San Jose , CA 95134-1706
USA
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
DESCRIPTION
"The MIB module for management of the Cisco Discovery
Protocol in Cisco devices."
REVISION "200503210000Z"
DESCRIPTION
"Added the following object:
cdpInterfaceName."
REVISION "200503140000Z"
DESCRIPTION
"Added cdpCtAddressTable which contains the following
objects:
cdpCtAddressIndex,
cdpCtAddressType,
cdpCtAddress."
REVISION "200111230000Z"
DESCRIPTION
"Added cdpInterfaceExtTable which contains the following
objects:
cdpInterfaceExtendedTrust,
cdpInterfaceCosForUntrustedPort."
REVISION "200104230000Z"
DESCRIPTION
"Added the following objects:
cdpGlobalDeviceIdFormatCpb,
cdpGlobalDeviceIdFormat."
REVISION "200011220000Z"
DESCRIPTION
"Added the following objects:
cdpCacheApplianceID,
cdpCacheVlanID,
cdpCachePowerConsumption,
cdpCacheMTU,
cdpCachePrimaryMgmtAddrType,
cdpCachePrimaryMgmtAddr,
cdpCacheSecondaryMgmtAddrType,
cdpCacheSecondaryMgmtAddr,
cdpCacheLastChange,
cdpCachePhysLocation,
cdpCacheSysName,
cdpCacheSysObjectID,
cdpGlobalLastChange"
REVISION "9812100000Z"
DESCRIPTION
"Added cdpGlobalDeviceId object."
REVISION "9809160000Z"
DESCRIPTION
"added these objects to cdpCacheTable:
cdpCacheVTPMgmtDomain,
cdpCacheNativeVLAN,
cdpCacheDuplex.
"
REVISION "9607080000Z"
DESCRIPTION
"Obsolete cdpInterfaceMessageInterval and newly
define cdpGlobal object."
REVISION "9508150000Z"
DESCRIPTION
"Specify a correct (non-negative) range for several
index objects."
REVISION "9507270000Z"
DESCRIPTION
"Correct range of cdpInterfaceMessageInterval."
REVISION "9501250000Z"
DESCRIPTION
"Move from ciscoExperiment to ciscoMgmt oid subtree."
::= { ciscoMgmt 23 }
ciscoCdpMIBObjects OBJECT IDENTIFIER ::= { ciscoCdpMIB 1 }
cdpInterface OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 1 }
cdpCache OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 2 }
cdpGlobal OBJECT IDENTIFIER ::= { ciscoCdpMIBObjects 3 }
--
-- The CDP Interface Group
--
cdpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing the status of CDP on
the device's interfaces."
::= { cdpInterface 1 }
cdpInterfaceEntry OBJECT-TYPE
SYNTAX CdpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the cdpInterfaceTable,
containing the status of CDP on an interface."
INDEX { cdpInterfaceIfIndex }
::= { cdpInterfaceTable 1 }
CdpInterfaceEntry ::= SEQUENCE {
cdpInterfaceIfIndex Integer32,
cdpInterfaceEnable TruthValue,
cdpInterfaceMessageInterval INTEGER,
cdpInterfaceGroup Integer32,
cdpInterfacePort Integer32,
cdpInterfaceName DisplayString
}
cdpInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the local interface.
For 802.3 Repeaters on which the repeater ports do not
have ifIndex values assigned, this value is a unique
value for the port, and greater than any ifIndex value
supported by the repeater; in this case, the specific
port is indicated by corresponding values of
cdpInterfaceGroup and cdpInterfacePort, where these
values correspond to the group number and port number
values of RFC 1516."
::= { cdpInterfaceEntry 1 }
cdpInterfaceEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the Cisco Discovery Protocol
is currently running on this interface. This variable
has no effect when CDP is disabled (cdpGlobalRun = FALSE)."
::= { cdpInterfaceEntry 2 }
cdpInterfaceMessageInterval OBJECT-TYPE
SYNTAX INTEGER (5..254)
UNITS "seconds"
MAX-ACCESS read-write
STATUS obsolete -- replaced by cdpGlobalMessageInterval
-- this object should be applied to the
-- whole system instead of per interface
DESCRIPTION
"The interval at which CDP messages are to be generated
on this interface. The default value is 60 seconds."
::= { cdpInterfaceEntry 3 }
cdpInterfaceGroup OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is only relevant to interfaces which are
repeater ports on 802.3 repeaters. In this situation,
it indicates the RFC1516 group number of the repeater
port which corresponds to this interface."
::= { cdpInterfaceEntry 4 }
cdpInterfacePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is only relevant to interfaces which are
repeater ports on 802.3 repeaters. In this situation,
it indicates the RFC1516 port number of the repeater
port which corresponds to this interface."
::= { cdpInterfaceEntry 5 }
cdpInterfaceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the local interface as advertised by
CDP in the Port-ID TLV"
::= { cdpInterfaceEntry 6 }
cdpInterfaceExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdpInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the additional CDP configuration on
the device's interfaces."
::= { cdpInterface 2 }
cdpInterfaceExtEntry OBJECT-TYPE
SYNTAX CdpInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the cdpInterfaceExtTable contains the values
configured for Extented Trust TLV and COS (Class of Service)
for Untrusted Ports TLV on an interface which supports the
sending of these TLVs."
INDEX { ifIndex }
::= { cdpInterfaceExtTable 1 }
CdpInterfaceExtEntry ::= SEQUENCE {
cdpInterfaceExtendedTrust INTEGER,
cdpInterfaceCosForUntrustedPort Unsigned32
}
cdpInterfaceExtendedTrust OBJECT-TYPE
SYNTAX INTEGER {
trusted(1),
noTrust(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the value to be sent by Extended Trust TLV.
If trusted(1) is configured, the value of Extended Trust TLV
is one byte in length with its least significant bit equal to
1 to indicate extended trust. All other bits are 0.
If noTrust(2) is configured, the value of Extended Trust TLV
is one byte in length with its least significant bit equal to
0 to indicate no extended trust. All other bits are 0."
::= { cdpInterfaceExtEntry 1 }
cdpInterfaceCosForUntrustedPort OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the value to be sent by COS for Untrusted Ports TLV."
::= { cdpInterfaceExtEntry 2 }
--
-- The CDP Cache Group
--
cdpCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdpCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing the cached
information obtained via receiving CDP messages."
::= { cdpCache 1 }
cdpCacheEntry OBJECT-TYPE
SYNTAX CdpCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the cdpCacheTable,
containing the information received via CDP on one
interface from one device. Entries appear when
a CDP advertisement is received from a neighbor
device. Entries disappear when CDP is disabled
on the interface, or globally."
INDEX { cdpCacheIfIndex, cdpCacheDeviceIndex }
::= { cdpCacheTable 1 }
CdpCacheEntry ::= SEQUENCE {
cdpCacheIfIndex Integer32,
cdpCacheDeviceIndex Integer32,
cdpCacheAddressType CiscoNetworkProtocol,
cdpCacheAddress CiscoNetworkAddress,
cdpCacheVersion DisplayString,
cdpCacheDeviceId DisplayString,
cdpCacheDevicePort DisplayString,
cdpCachePlatform DisplayString,
cdpCacheCapabilities OCTET STRING,
cdpCacheVTPMgmtDomain DisplayString,
cdpCacheNativeVLAN VlanIndex,
cdpCacheDuplex INTEGER,
cdpCacheApplianceID Unsigned32,
cdpCacheVlanID Unsigned32,
cdpCachePowerConsumption Unsigned32,
cdpCacheMTU Unsigned32,
cdpCacheSysName DisplayString,
cdpCacheSysObjectID OBJECT IDENTIFIER,
cdpCachePrimaryMgmtAddrType CiscoNetworkProtocol,
cdpCachePrimaryMgmtAddr CiscoNetworkAddress,
cdpCacheSecondaryMgmtAddrType CiscoNetworkProtocol,
cdpCacheSecondaryMgmtAddr CiscoNetworkAddress,
cdpCachePhysLocation DisplayString,
cdpCacheLastChange TimeStamp
}
cdpCacheIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Normally, the ifIndex value of the local interface.
For 802.3 Repeaters for which the repeater ports do not
have ifIndex values assigned, this value is a unique
value for the port, and greater than any ifIndex value
supported by the repeater; the specific port number in
this case, is given by the corresponding value of
cdpInterfacePort."
::= { cdpCacheEntry 1 }
cdpCacheDeviceIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value for each device from which CDP messages
are being received."
::= { cdpCacheEntry 2 }
cdpCacheAddressType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the type of address contained in the
corresponding instance of cdpCacheAddress."
::= { cdpCacheEntry 3 }
cdpCacheAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (first) network-layer address of the device
as reported in the Address TLV of the most recently received
CDP message. For example, if the corresponding instance of
cacheAddressType had the value 'ip(1)', then this object
would be an IPv4-address. If the neighbor device is
SNMP-manageable, it is supposed to generate its CDP messages
such that this address is one at which it will receive SNMP
messages. Use cdpCtAddressTable to extract the remaining
addresses from the Address TLV received most recently."
::= { cdpCacheEntry 4 }
cdpCacheVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version string as reported in the most recent CDP
message. The zero-length string indicates no Version
field (TLV) was reported in the most recent CDP
message."
::= { cdpCacheEntry 5 }
cdpCacheDeviceId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Device-ID string as reported in the most recent CDP
message. The zero-length string indicates no Device-ID
field (TLV) was reported in the most recent CDP
message."
::= { cdpCacheEntry 6 }
cdpCacheDevicePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port-ID string as reported in the most recent CDP
message. This will typically be the value of the ifName
object (e.g., 'Ethernet0'). The zero-length string
indicates no Port-ID field (TLV) was reported in the
most recent CDP message."
::= { cdpCacheEntry 7 }
cdpCachePlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Device's Hardware Platform as reported in the most
recent CDP message. The zero-length string indicates
that no Platform field (TLV) was reported in the most
recent CDP message."
::= { cdpCacheEntry 8 }
cdpCacheCapabilities OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Device's Functional Capabilities as reported in the
most recent CDP message. For latest set of specific
values, see the latest version of the CDP specification.
The zero-length string indicates no Capabilities field
(TLV) was reported in the most recent CDP message."
REFERENCE "Cisco Discovery Protocol Specification, 10/19/94."
::= { cdpCacheEntry 9 }
cdpCacheVTPMgmtDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VTP Management Domain for the remote device's interface,
as reported in the most recently received CDP message.
This object is not instantiated if no VTP Management Domain field
(TLV) was reported in the most recently received CDP message."
REFERENCE "managementDomainName in CISCO-VTP-MIB"
::= { cdpCacheEntry 10 }
cdpCacheNativeVLAN OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote device's interface's native VLAN, as reported in the
most recent CDP message. The value 0 indicates
no native VLAN field (TLV) was reported in the most
recent CDP message."
::= { cdpCacheEntry 11 }
cdpCacheDuplex OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
halfduplex(2),
fullduplex(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote device's interface's duplex mode, as reported in the
most recent CDP message. The value unknown(1) indicates
no duplex mode field (TLV) was reported in the most
recent CDP message."
::= { cdpCacheEntry 12 }
cdpCacheApplianceID OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote device's Appliance ID, as reported in the
most recent CDP message. This object is not instantiated if
no Appliance VLAN-ID field (TLV) was reported in the most
recently received CDP message."
::= { cdpCacheEntry 13 }
cdpCacheVlanID OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote device's VoIP VLAN ID, as reported in the
most recent CDP message. This object is not instantiated if
no Appliance VLAN-ID field (TLV) was reported in the most
recently received CDP message."
::= { cdpCacheEntry 14 }
cdpCachePowerConsumption OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of power consumed by remote device, as reported
in the most recent CDP message. This object is not instantiated
if no Power Consumption field (TLV) was reported in the most
recently received CDP message."
::= { cdpCacheEntry 15 }
cdpCacheMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the size of the largest datagram that can be
sent/received by remote device, as reported in the most recent
CDP message. This object is not instantiated if no MTU field
(TLV) was reported in the most recently received CDP message."
::= { cdpCacheEntry 16 }
cdpCacheSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of the remote device's sysName MIB object.
By convention, it is the device's fully qualified domain name.
This object is not instantiated if no sysName field (TLV) was
reported in the most recently received CDP message."
::= { cdpCacheEntry 17 }
cdpCacheSysObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the value of the remote device's sysObjectID MIB
object. This object is not instantiated if no sysObjectID field
(TLV) was reported in the most recently received CDP message."
::= { cdpCacheEntry 18 }
cdpCachePrimaryMgmtAddrType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the type of address contained in the
corresponding instance of cdpCachePrimaryMgmtAddress."
::= { cdpCacheEntry 19 }
cdpCachePrimaryMgmtAddr OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the (first) network layer
address at which the device will accept SNMP messages
as reported in the first address in the
Management-Address TLV of the most recently received
CDP message. If the corresponding instance of
cdpCachePrimaryMgmtAddrType has the value 'ip(1)',
then this object would be an IP-address. If the
remote device is not currently manageable via any
network protocol, then it reports the special value
of the IPv4 address 0.0.0.0, and that address is
recorded in this object. If the most recently received
CDP message did not contain the Management-Address
TLV, then this object is not instanstiated."
::= { cdpCacheEntry 20 }
cdpCacheSecondaryMgmtAddrType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the type of address contained in the
corresponding instance of cdpCacheSecondaryMgmtAddress."
::= { cdpCacheEntry 21 }
cdpCacheSecondaryMgmtAddr OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the alternate network layer
address at which the device will accept SNMP messages
as reported in the second address in the
Management-Address TLV of the most recently received
CDP message. If the corresponding instance of
cdpCacheSecondaryMgmtAddrType has the value 'ip(1)',
then this object would be an IP-address. If the
remote device reports the special value of the
IPv4 address 0.0.0.0, that address is recorded in
this object. If the most recently received CDP
message did not contain the Management-Address
TLV, or if that TLV contained only one address, then
this object is not instanstiated."
::= { cdpCacheEntry 22 }
cdpCachePhysLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the physical location, as reported by the most recent
CDP message, of a connector which is on, or physically connected
to, the remote device's interface over which the CDP packet is
sent. This object is not instantiated if no Physical Location
field (TLV) was reported by the most recently received CDP
message."
::= { cdpCacheEntry 23 }
cdpCacheLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time when this cache entry was last changed.
This object is initialised to the current time when the entry
gets created and updated to the current time whenever the value
of any (other) object instance in the corresponding row is
modified."
::= { cdpCacheEntry 24 }
cdpCtAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CdpCtAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing the list of
network-layer addresses of a neighbor interface,
as reported in the Address TLV of the most recently
received CDP message. The first address included in
the Address TLV is saved in cdpCacheAddress. This
table contains the remainder of the addresses in the
Address TLV."
::= { cdpCache 2 }
cdpCtAddressEntry OBJECT-TYPE
SYNTAX CdpCtAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the cdpCtAddressTable,
containing the information on one address received via CDP
on one interface from one device. Entries appear
when a CDP advertisement is received from a neighbor
device, with an Address TLV. Entries disappear when
CDP is disabled on the interface, or globally. An entry
or entries would also disappear if the most recently
received CDP packet contain fewer address entries in the
Address TLV, than are currently present in the CDP cache."
INDEX { cdpCacheIfIndex, cdpCacheDeviceIndex,
cdpCtAddressIndex }
::= { cdpCtAddressTable 1 }
CdpCtAddressEntry ::= SEQUENCE {
cdpCtAddressIndex Integer32,
cdpCtAddressType CiscoNetworkProtocol,
cdpCtAddress CiscoNetworkAddress
}
cdpCtAddressIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the address entry for a given
cdpCacheIfIndex,cdpCacheDeviceIndex pair. It
has the value N-1 for the N-th address in the
Address TLV"
::= { cdpCtAddressEntry 3 }
cdpCtAddressType OBJECT-TYPE
SYNTAX CiscoNetworkProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the type of address contained in the
corresponding instance of cdpCtAddress."
::= { cdpCtAddressEntry 4 }
cdpCtAddress OBJECT-TYPE
SYNTAX CiscoNetworkAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The N-th network-layer address of the device as reported
in the most recent CDP message's Address TLV, where N-1 is
given by the value of cdpCtAddressIndex. For example, if
the the corresponding instance of cdpCtAddressType had the
value 'ip(1)', then this object would be an IPv4-address.
NOTE - The 1st address received in the Address TLV is
available using cdpCacheAddress"
::= { cdpCtAddressEntry 5 }
--
-- The CDP Global Group
--
cdpGlobalRun OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the Cisco Discovery Protocol
is currently running. Entries in cdpCacheTable are
deleted when CDP is disabled."
DEFVAL { true }
::= { cdpGlobal 1 }
cdpGlobalMessageInterval OBJECT-TYPE
SYNTAX INTEGER (5..254)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval at which CDP messages are to be generated.
The default value is 60 seconds."
DEFVAL { 60 }
::= { cdpGlobal 2 }
cdpGlobalHoldTime OBJECT-TYPE
SYNTAX INTEGER (10..255)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time for the receiving device holds CDP message.
The default value is 180 seconds."
DEFVAL { 180 }
::= { cdpGlobal 3 }
cdpGlobalDeviceId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The device ID advertised by this device. The format of this
device id is characterized by the value of
cdpGlobalDeviceIdFormat object."
::= { cdpGlobal 4 }
cdpGlobalLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the time when the cache table was last changed. It
is the most recent time at which any row was last created,
modified or deleted."
::= { cdpGlobal 5 }
cdpGlobalDeviceIdFormatCpb OBJECT-TYPE
SYNTAX BITS {
serialNumber(0),
macAddress(1),
other (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the Device-Id format capability of the device.
serialNumber(0) indicates that the device supports using
serial number as the format for its DeviceId.
macAddress(1) indicates that the device supports using
layer 2 MAC address as the format for its DeviceId.
other(2) indicates that the device supports using its
platform specific format as the format for its DeviceId."
::= { cdpGlobal 6 }
cdpGlobalDeviceIdFormat OBJECT-TYPE
SYNTAX INTEGER {
serialNumber(1),
macAddress(2),
other(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of the format of Device-Id contained in the
corresponding instance of cdpGlobalDeviceId. User can only
specify the formats that the device is capable of as
denoted in cdpGlobalDeviceIdFormatCpb object.
serialNumber(1) indicates that the value of cdpGlobalDeviceId
object is in the form of an ASCII string contain the device
serial number.
macAddress(2) indicates that the value of cdpGlobalDeviceId
object is in the form of Layer 2 MAC address.
other(3) indicates that the value of cdpGlobalDeviceId object
is in the form of a platform specific ASCII string contain
info that identifies the device. For example: ASCII string
contains serialNumber appended/prepened with system name."
::= { cdpGlobal 7 }
-- conformance information
ciscoCdpMIBConformance
OBJECT IDENTIFIER ::= { ciscoCdpMIB 2 }
ciscoCdpMIBCompliances
OBJECT IDENTIFIER ::= { ciscoCdpMIBConformance 1 }
ciscoCdpMIBGroups
OBJECT IDENTIFIER ::= { ciscoCdpMIBConformance 2 }
-- compliance statements
ciscoCdpMIBCompliance MODULE-COMPLIANCE
STATUS obsolete -- superseded by ciscoCdpMIBComplianceV11R01
DESCRIPTION
"The compliance statement for the CDP MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoCdpMIBGroup }
::= { ciscoCdpMIBCompliances 1 }
ciscoCdpMIBComplianceV11R01 MODULE-COMPLIANCE
STATUS obsolete -- superseded by ciscoCdpMIBComplianceV11R02
DESCRIPTION
"The compliance statement for the CDP MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoCdpMIBGroupV11R01 }
::= { ciscoCdpMIBCompliances 2 }
ciscoCdpMIBComplianceV11R02 MODULE-COMPLIANCE
STATUS obsolete -- superseded by ciscoCdpMIBComplianceV12R02
DESCRIPTION
"The compliance statement for the CDP MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoCdpMIBGroupV11R02 }
::= { ciscoCdpMIBCompliances 3 }
ciscoCdpMIBComplianceV12R02 MODULE-COMPLIANCE
STATUS obsolete -- superseded by ciscoCdpMIBCompliance5
DESCRIPTION
"The compliance statement for the CDP MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoCdpMIBGroupV12R02 }
::= { ciscoCdpMIBCompliances 4 }
ciscoCdpMIBCompliance5 MODULE-COMPLIANCE
STATUS deprecated -- superseded by ciscoCdpMIBComplianceV12R03
DESCRIPTION
"The compliance statement for the CDP MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoCdpMIBGroupV12R02 }
::= { ciscoCdpMIBCompliances 5 }
ciscoCdpMIBComplianceV12R03 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the CDP MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoCdpMIBGroupV12R03,
ciscoCdpCtAddressGroup
}
GROUP ciscoCdpV2MIBGroup
DESCRIPTION
"This group is mandatory for agents implementing CDP version 2"
GROUP ciscoCdpV2IfExtGroup
DESCRIPTION
"This group is mandatory for agents implementing Extended Trust
TLV and COS for Untrusted Port TLV of CDP version 2."
::= { ciscoCdpMIBCompliances 6 }
-- units of conformance
ciscoCdpMIBGroup OBJECT-GROUP
OBJECTS { cdpInterfaceEnable, cdpInterfaceMessageInterval,
cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion,
cdpCacheDeviceId, cdpCacheDevicePort,
cdpCacheCapabilities, cdpCachePlatform
}
STATUS obsolete -- superseded by ciscoCdpMIBGroupV11R01
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol."
::= { ciscoCdpMIBGroups 1 }
ciscoCdpMIBGroupV11R01 OBJECT-GROUP
OBJECTS { cdpInterfaceEnable, cdpInterfaceMessageInterval,
cdpInterfaceGroup, cdpInterfacePort,
cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion,
cdpCacheDeviceId, cdpCacheDevicePort,
cdpCacheCapabilities, cdpCachePlatform
}
STATUS obsolete -- superseded by ciscoCdpMIBGroupV11R02
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol."
::= { ciscoCdpMIBGroups 2 }
ciscoCdpMIBGroupV11R02 OBJECT-GROUP
OBJECTS { cdpInterfaceEnable,
cdpInterfaceGroup, cdpInterfacePort,
cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion,
cdpCacheDeviceId, cdpCacheDevicePort,
cdpCacheCapabilities, cdpCachePlatform,
cdpGlobalRun, cdpGlobalMessageInterval, cdpGlobalHoldTime
}
STATUS obsolete -- superseded by ciscoCdpMIBGroupV12R02
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol."
::= { ciscoCdpMIBGroups 3 }
ciscoCdpMIBGroupV12R02 OBJECT-GROUP
OBJECTS { cdpInterfaceEnable,
cdpInterfaceGroup, cdpInterfacePort,
cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion,
cdpCacheDeviceId, cdpCacheDevicePort,
cdpCacheCapabilities, cdpCachePlatform,
cdpCacheVTPMgmtDomain, cdpCacheNativeVLAN, cdpCacheDuplex,
cdpGlobalRun, cdpGlobalMessageInterval, cdpGlobalHoldTime,
cdpGlobalDeviceId
}
STATUS deprecated -- superseded by ciscoCdpMIBGroupV12R03
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol."
::= { ciscoCdpMIBGroups 5 }
ciscoCdpV2MIBGroup OBJECT-GROUP
OBJECTS {
cdpCacheApplianceID, cdpCacheVlanID,
cdpCachePowerConsumption, cdpCacheMTU,
cdpCacheSysName, cdpCacheSysObjectID,
cdpCacheLastChange, cdpCachePhysLocation,
cdpCachePrimaryMgmtAddrType,
cdpCachePrimaryMgmtAddr,
cdpCacheSecondaryMgmtAddrType,
cdpCacheSecondaryMgmtAddr,
cdpGlobalLastChange, cdpGlobalDeviceIdFormatCpb,
cdpGlobalDeviceIdFormat
}
STATUS current
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol version 2."
::= { ciscoCdpMIBGroups 6 }
ciscoCdpV2IfExtGroup OBJECT-GROUP
OBJECTS {
cdpInterfaceExtendedTrust,
cdpInterfaceCosForUntrustedPort
}
STATUS current
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol version 2 to configure the value
for Extended Trust TLV and COS for Untrusted Port TLV."
::= { ciscoCdpMIBGroups 7 }
ciscoCdpCtAddressGroup OBJECT-GROUP
OBJECTS {
cdpCtAddressType,
cdpCtAddress
}
STATUS current
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol to obtain the addresses from
the Address TLV of a received CDP packet."
::= { ciscoCdpMIBGroups 8 }
ciscoCdpMIBGroupV12R03 OBJECT-GROUP
OBJECTS { cdpInterfaceEnable,
cdpInterfaceGroup, cdpInterfacePort, cdpInterfaceName,
cdpCacheAddressType, cdpCacheAddress, cdpCacheVersion,
cdpCacheDeviceId, cdpCacheDevicePort,
cdpCacheCapabilities, cdpCachePlatform,
cdpCacheVTPMgmtDomain, cdpCacheNativeVLAN, cdpCacheDuplex,
cdpGlobalRun, cdpGlobalMessageInterval, cdpGlobalHoldTime,
cdpGlobalDeviceId
}
STATUS current
DESCRIPTION
"A collection of objects for use with the Cisco
Discovery Protocol."
::= { ciscoCdpMIBGroups 9 }
END
Reference in New Issue Copy Permalink