david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-CLASS-BASED-QOS-MIB

10455 lines
356 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- Cisco Class-Based QoS Configuration and Statistics MIB
--
-- Copyright (c) 2000-2004, 2007-2009-2014 by Cisco Systems Inc.
--
-- All rights reserved.
--
-- ***************************************************************
CISCO-CLASS-BASED-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Gauge32,
Unsigned32,
Counter64,
dod
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
TruthValue,
TimeStamp
FROM SNMPv2-TC
ifIndex,
InterfaceIndex
FROM IF-MIB
VlanIndex
FROM Q-BRIDGE-MIB
CounterBasedGauge64
FROM HCNUM-TC
Unsigned64,
EntPhysicalIndexOrZero
FROM CISCO-TC
DlciNumber
FROM CISCO-FRAME-RELAY-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoCBQosMIB MODULE-IDENTITY
LAST-UPDATED "201401240000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 800 553-NETS
E-mail: cs-qos@cisco.com"
DESCRIPTION
"Cisco Class-Based QoS MIB
**********************************
Overview
**********************************
This MIB provides read access to Quality of Service (QoS)
configuration and statistics information for Cisco
platforms that support the Modular Quality of Service
Command-line Interface (Modular QoS CLI). We recommend
users of this MIB to review the user documentation of
MQC based QoS features.
Configuration information available through this MIB includes
all ClassMap, PolicyMap, Match Statements, and Feature
Actions configuration parameters. The definitions of each
objects mentioned above are explained in the QoS objects
section.
Statistics available through this MIB include summary
counts/rates by traffic class before and after any configured
QoS policies are enforced. In addition, detailed
feature-specific statistics are available for select
PolicyMap features.
Contact your Cisco representative to determine on which
platforms the MIB is currently supported.
**********************************
QoS Acronyms
**********************************
BECN: Frame Relay Backward Explicit Congestion Notification
CIR : Committed Information Rate
DSCP: Differentiated Service Code Point
EB : Estimate Bandwidth
ECN : Explicite Congestion Notification
FECN: Frame Relay Forward Explicit Congestion Notification
IPHC: Internet Protocol Header Compression
IPSLAs: IP Service Level Agreement Technologies
PIR : Peak Information Rate
PREC: Precedence
QoS : Quality Of Services
RED : Random Early Detect
SRP : Spatial Reuse Protocol
WRED: Weighted Random Early Detect
C3PL: Cisco Common Classification Programming Language
**********************************
MIB Objects
**********************************
This MIB consists of the following object groups:
1 : cbQosServicePolicy
2 : cbQosInterfacePolicy
3 : cbQosFrameRelayVCPolicy
4 : cbQosATMPVCPolicy
5 : cbQosObjects
6 : cbQosPolicyMapCfg
7 : cbQosClassMapCfg
8 : cbQosMatchStmtCfg
9 : cbQosQueueingCfg
10: cbQosREDCfg
11: cbQosREDClassCfg
12: cbQosPoliceCfg
13: cbQosTSCfg
14: cbQosSetCfg
15: cbQosClassMapStats
16: cbQosMatchStmtStats
17: cbQosPoliceStats
18: cbQosQueueingStats
19: cbQosTSStats
20: cbQosREDClassStats
21: cbQosPoliceActionCfg
22: cbQosIPHCCfg
23: cbQosIPHCStats
24: cbQosSetStats
25: cbQosPoliceColorStats
26: cbQosTableMapCfg
27: cbQosTableMapValueCfg
28: cbQosTableMapSetCfg
29: cbQosEBCfg
30: cbQosEBStats
31: cbQosMeasureIPSLACfg
32: cbQosC3plAccountCfg
33: cbQosC3plAccountStats
**********************************
Definitions
**********************************
A logical interface in the context of this MIB is either
a main-interface, a sub-interface, a Frame Relay DLCI,
an ATM virtual circuit or the control-plane on the router.
The (aggregate) control-plane on the router is defined as
a collection of processes running at process level on the
platform (route) processor. This includes the functions
related to networking control capabilities such as routing,
signaling, provisioning, as well as resource and service
discovery. Also includes process switched traffic on the
device.
The term distributed control plane, in the context of
this mib, represents the control-plane functionality at
the level of individual linecards. This is only
applicable for the case of distributed platforms.
**********************************
QoS Objects
**********************************
To understand Class-Based QoS features and how to navigate
the MIB tables above, the key element is to comprehend the
relationships among the different QoS objects. QoS objects
consist of ClassMaps, Match Statements and PolicyMaps,
and each Feature Actions.
Match Statement - The specific match criteria to identify
packets for classification purposes.
ClassMap - A user-defined traffic class that contains
one or many match statements used to classify packets into
different categories.
Feature Action - An action is a QoS feature. Features
include police, traffic-shaping, queueing, random detect
and packet marking(set). After the traffic is being
classified, based on the traffic classification, we can
apply these action to each traffic class.
PolicyMap - A user-defined policy that associates each QoS
action to the user-defined traffic class (ClassMap).
Service Policy - Service policy is a policymap
that is being attached to a logical interface. Because a
policymap can also be a part of the hierarchical structure
(inside a classmap), only a policymap that is directly
attached to a logical interface is considered a service
policy. Each service policy is uniquely identified by an
index called cbQosPolicyIndex. This number is usually
identical to its cbQosObjectsIndex as a policymap.
*****************************************
Runtime Instance vs Configuration objects
*****************************************
Each QoS objects have 2 sets of behaviours :
1: A configuration instance
- Each QoS objects has it's configuration portion of
information attached to it. This information does
not change whether this object is attached on multiple
logical interfaces and used multiple times. We
uniquely identify each QoS object with identical
configuration with the same index - cbQosConfigIndex.
This index is used in all configuration related
tables.
2: A runtime instance
- Each QoS objects has it's statistical portion of
information attached to it. This information changes
when this object is attached on multiple logical
interfaces and used in various different places. We
uniquely identify each QoS runtime object instance
with an index that is unique across multiple
instances of the identical object - cbQosObjectsIndex.
This index is used in all statistical related tables.
In summary, a QoS object has 2 indexes associated with it:
cbQosConfigIndex is used to identify it's configuration,
which does not change regardless of number of times and
where it is being used; and cbQosObjectsIndex is used
to identify it's runtime statistics, depending on which
logical interface and where in a given PolicyMap hierarchy
this object is used, it may have multiple unique
identifiers to distinguish each unique usage (instance) of
the same object.
**********************************
Navigation
**********************************
The recommended method of navigating through all of the MIB
tables is to start by learning the cbQosServicePolicyTable
and cbQosObjectsTable MIB tables. In particular, Cisco
Systems recommends understanding the cbQosObjectsIndex and
cbQosParentObjectsIndex of each QoS feature.
The cbQosPolicyIndex and cbQosObjectsIndex are
system-assigned numbers that identify each unique instance
of a QoS feature. These indexes are never reused between
router reboots, even when changes are made to the QoS
configuration. The cbQosPolicyIndex is designed to identify
the service policies attached to logical interfaces, while
the cbQosObjectsIndex is designed to identify each QoS
feature on a specified device.
The cbQosParentObjectsIndex is designed to show the
hierarchical relationship of each QoS feature.
**********************************
cbQosServicePolicyTable
**********************************
Accessing cbQosServicePolicyTable requires
cbQosPolicyIndex. This index is a system-assigned number
to uniquely identify each service policy hanging off of
each logical interface. Given cbQosPolicyIndex the tables
provide the type of logical interface/media type on which
this policy is applied, the direction in which this policy
is enforced, and the SNMP interface index and/or the entity
index of the underlying interface/entity. In the case of a
policy being applied on a Frame Relay DLCI, the cbQosFrDLCI
gives you the Frame Relay DLCI number to which this policy
is attached. In the case of policy being attached to an ATM
VC, cbQosAtmVPI and cbQosAtmVCI display the VPI and VCI of
the ATM interface respectively.
**********************************
cbQosObjectsTable
**********************************
Accessing cbQosObjectsTable requires two indexes,
cbQosPolicyIndex and cbQosObjectsIndex.
Given a particular service policy on a given logical
interface, there could be PolicyMaps, ClassMaps, Match
Statements and Feature Actions being used. Each instance
of these objects is uniquely identified by
cbQosObjectsIndex.
Users need to decide which QoS object is interesting
and use the cbQosPolicyIndex and cbQosObjectsIndex to
locate the right element of interest. This tables provides
cbQosObjectsType, cbQosConfigIndex, and
cbQosParentObjectsIndex.
To understand the relationship of cbQosObjectsIndex,
cbQosParentObjectsIndex and the hierarchical relationship
of the QoS objects, consider the following QoS
configuration example:
Interface ethernet 0/1
Input Service Policy cntlWebTraffic
ClassMap http
match ip http
set ip precedence 5
Output Service Policy cntlSNMP_Telnet
ClassMap snmp
match ip snmp
shape average 8000 32 32
ClassMap Telnet
match ip telnet
shape average 10000 32 32
Interface ethernet 0/2
Input Service Policy cntlWebTraffic
ClassMap http
match ip http
set ip precedence 5
Output Service Policy cntlSNMP_Telnet
ClassMap snmp
match ip snmp
shape average 8000 32 32
ClassMap Telnet
match ip telnet
shape average 10000 32 32
*** In Ethernet 0/1 ***
Assume the router assigned a cbQosConfigIndex=1024 and
cbQosObjectsIndex=1084 to Policy cntlWebTraffic.
Because it is attached to an interface, it has no parent
QoS object, and thus cbQosParentObjectsIndex=0.
In addition, because cntlWebTraffic is also the service
policy of the interface, it has a unique cbQosPolicyIndex
assigned to it. In most cases, it would be the same as
the cbQosObjectsIndex, which is 1084 in this case.
Therefore, the indexes are:
cbQosPolicyIndex = 1084
cbQosObjectsIndex = 1084
cbQosConfigIndex = 1024
Assuming the router assigned a cbQosObjectsIndex=1085
and cbQosConfigIndex=1025 to ClassMap http, it is
directly being used by Policy cntlWebTraffic, and therefore
the cbQosParentObjectsIndex of ClassMap http will be 1084.
Assuming the router assigned a cbQosConfigIndex=1026 and
cbQosObjectsIndex=1086 to match ip http, it is directly
used by ClassMap http, therefore the
cbQosParentObjectsIndex of match ip http will be 1085.
Assuming the router assigned a cbQosConfigIndex=1027 and
cbQosObjectsIndex=1087 to set ip precedence 5, it is
directly used by ClassMap http, therefore the
cbQosParentObjectsIndex of match ip http will be 1085.
Assuming the router assigned a cbQosConfigIndex=1028 and
cbQosObjectsIndex=1088 to Policy cntlSNMP_Telnet.
Because it is attached to an interface, it has no parent
QoS object, and thus cbQosParentObjectsIndex=0.
In addition, because cntlSNMP_Telnet is also the service
policy of the interface, it has a unique cbQosPolicyIndex
assigned to it. In most cases, it would be the same as
the cbQosObjectsIndex, which is 1088 in this case.
Assuming the router assigned a cbQosConfigIndex=1029 and
cbQosObjectsIndex=1089 to ClassMap snmp, it is
directly being used by Policy cntlSNMP_Telnet, and
therefore the cbQosParentObjectsIndex of ClassMap snmp
will be 1088.
Assuming the router assigned a cbQosConfigIndex=1030 and
cbQosObjectsIndex=1090 to match ip snmp, it is directly
used by ClassMap snmp, and therefore the
cbQosParentObjectsIndex of match ip snmp will be 1089.
Assuming the router assigned a cbQosConfigIndex=1031 and
cbQosObjectsIndex=1091 to shape average 8000 32 32,
it is directly used by ClassMap snmp, therefore the
cbQosParentObjectsIndex of match ip snmp will be 1089.
Assuming the router assigned a cbQosConfigIndex=1032 and
cbQosObjectsIndex=1092 to ClassMap Telnet, it is
directly being used by Policy cntlSNMP_Telnet, and
therefore the cbQosParentObjectsIndex of
ClassMap Telnet will be 1088.
Assuming the router assigned a cbQosConfigIndex=1033 and
cbQosObjectsIndex=1093 to match ip telnet, it is
directly used by ClassMap Telnet, and therefore the
cbQosParentObjectsIndex of match ip telnet will be 1092.
Assuming the router assigned a cbQosConfigIndex=1034 and
cbQosObjectsIndex=1094 to shape 10000 32 32, it is
directly used by ClassMap telnet, therefore the
cbQosParentObjectsIndex of match ip telnet will be 1092.
*** In Ethernet 0/2 ***
Every objects will have a unique combination of
cbQosPolicyIndex and cbQosObjectsIndex, but
cbQosConfigIndex will be shared across the same
objects that are applied in different places.
**********************************
All Config Tables
**********************************
Accessing config related tables requires the same index
- cbQosConfigIndex. (Per precedence based tables requires
a second index, which is IP precedence value) Users
should have already gone through the cbQosObjectsTable
at this point and understood each cbQosConfigIndex and the
corresponding QoS objects. Users can uniquely identify
each QoS object defined on the router and query the
entries in each stats table on a per QoS object basis.
**********************************
All Stats Tables
**********************************
Accessing all stats related tables requires the same
2 indexes. They are cbQosPolicyIndex and cbQosObjectsIndex.
(Per precedence based tables requires a third index, which
is IP precedence value) Users should have already gone
through the cbQosObjectsTable at this point and understood
the relationship of each cbQosPolicyIndex and
cbQosObjectsIndex pair and the corresponding QoS objects.
Users can uniquely identify each QoS object defined on the
router and query the entries in each stats table on a per
QoS object basis."
REVISION "201401240000Z"
DESCRIPTION
"Added new object cbQosParentPolicyIndex in
cbQosServicePolicyTable"
REVISION "201310100000Z"
DESCRIPTION
"Added cbQosQueueingStatsGroupRev1
Added ciscocbQosMIBComplianceRev13"
REVISION "201306200000Z"
DESCRIPTION
"Added the following 64-bit Objects
cbQosCMPrePolicyBitRate64
cbQosCMPostPolicyBitRate64
cbQosCMDropBitRate64
cbQosPoliceConformedBitRate64
cbQosPoliceExceededBitRate64
cbQosPoliceViolatedBitRate64"
REVISION "201302150000Z"
DESCRIPTION
"Added Percentage as a unit for cbQoSQueueUnitType"
REVISION "201207240000Z"
DESCRIPTION
"The following 2 objects are expanded to include perThousand and
perMillion units.
1. QueueingBandwidthUnits
2. CbQosRateType"
REVISION "201203220000Z"
DESCRIPTION
"The following 4 changes have been made
1. Added the following 64 bit objects and deprecated the
corresponding 32 bit objects
=================================================
cbQosQueueingCfgBandwidth64, cbQosQueueingCfgIndividualQSize64,
cbQosPoliceCfgBurstSize64, cbQosPoliceCfgExtBurstSize64,
cbQosPoliceCfgPir64,
cbQosTSCfgBurstSize64, cbQosTSCfgExtBurstSize64
2. Range expanded for
==================
cbQosQueueingCfgBandwidth, cbQosQueueingCfgIndividualQSize,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize, cbQosPoliceCfgPir,
cbQosTSCfgBurstSize, cbQosTSCfgExtBurstSize,
cbQosREDCfgMinThreshold, cbQosREDCfgMaxThreshold,
cbQosPoliceCfgRate, cbQosPoliceCfgBurstCell,
cbQosPoliceCfgExtBurstCell, cbQosPoliceCfgBurstTime,
cbQosPoliceCfgExtBurstTime,
cbQosPoliceCfgCdvt, cbQosTSCfgRate,cbQosTSCfgBurstTime,
cbQosTSCfgExtBurstTime
3. New object added
================
cbQosPolicyDiscontinuityTime
4. Added new type (srp-priority) to
==================================
PoliceAction"
REVISION "200911250000Z"
DESCRIPTION
"Added setDei(16), setDeiImposition(17) to the TC PoliceAction.
Added dei(14), deiImposition(15) to the TC SetFeatureType.
Added dei(9) to the TC REDMechanism.
Added objects
cbQosSetCfgIpPrecedenceTunnelValue,
cbQosSetCfgIpDscpTunnelValue,
cbQosSetCfgDei,
cbQosSetCfgDeiImposition
to CbQosSetCfgEntry
Added objects
cbQosPoliceCfmColorCfmRate,
cbQosPoliceCfmColorExdRate,
cbQosPoliceCfmColorVltRate,
cbQosPoliceExdColorExdRate,
cbQosPoliceExdColorVltRate,
cbQosPoliceVltColorVltRate
to cbQosPoliceColorStatsEntry.
Added Objects
cbQosIPHCCfgEnabled
to cbQosIPHCCfgEntry
Added Objects
cbQosIPHCRtpFullHdrPktOverflow,
cbQosIPHCRtpFullHdrPkt,
cbQosIPHCRtpFullHdrPkt64,
cbQosIPHCTcpFullHdrPktOverflow,
cbQosIPHCTcpFullHdrPkt,
cbQosIPHCTcpFullHdrPkt64
to cbQosIPHCStatsEntry
Added ciscocbQosMIBComplianceRev10."
REVISION "200909160000Z"
DESCRIPTION
"Added unconfigured(15) value to PoliceAction TC.
Added cbQosCMFragmentPktOverflow,
cbQosCMFragmentPkt,
cbQosCMFragmentPkt64,
cbQosCMFragmentByteOverflow,
cbQosCMFragmentByte,
cbQosCMFragmentByte64 in CbQosCMStatsEntry.
Added evc(7) enum value in InterfaceType TC.
Added cbQosEVC in CbQosServicePolicyEntry
Changed comments for cbQosPolicyIndex and cbQosObjectsIndex.
Added ciscocbQosMIBComplianceRev9."
REVISION "200904240000Z"
DESCRIPTION
"- Added cbQosSetCfgFrDe to hold the Fr-De marking configuration
value in cbQosSetCfgTable.
- Updated the optional groups of ciscocbQosMIBComplianceRev7
with cbQosSetCfgFrDeGroup.
- Added MODULE-COMPLIANCE ciscocbQosMIBComplianceRev8."
REVISION "200901260000Z"
DESCRIPTION
"Added account feature in QosObjectType."
REVISION "200811200000Z"
DESCRIPTION
"Added cbQosC3plAccountCfgGroup and cbQosC3plAccountStatsGroup."
REVISION "200806170000Z"
DESCRIPTION
"-Added ratioRemaining in QueueingBandwidthUnits
-Added l2CosInner in SetFeatureType
-Added cbQosQueueingCfgPriorityLevel in cbQosQueueingCfgTable
-Added cbQosSetCfgL2CosInnerValue in cbQosSetCfgTable
-Added in cbQosREDClassCfgTable
cbQosREDClassCfgMaxThresholdUnit,
cbQosREDClassCfgMinThresholdUnit
-Added cbQosQueueingClassCfgTable
- Added following OBJECT-GROUPs
cbQosQueueingCfgGroupRev2
cbQosSetCfgL2Group
cbQosQueueingClassCfgGroup
cbQosPoliceCfgGroupRev3
- Added MODULE-COMPLIANCE cisco
cbQosMIBComplianceRev6"
REVISION "200710090000Z"
DESCRIPTION
"1. Added cbQosTSCfgRate64 to cbQosTSCfgTable
to support shaping rates greater than that fit in
the range defined for cbQosTSCfgRate.
2. Created cbQosTSCfgExtGroup.
3. Created new compliance module ciscocbQosMIBComplianceRev5
which deprecates ciscocbQosMIBComplianceRev4."
REVISION "200708300000Z"
DESCRIPTION
"Added 'setL2CosInner' value to PoliceAction TC."
REVISION "200707100000Z"
DESCRIPTION
"Added following enumerations to RedMechanism TC:
mplsExp
redDefault
redUserDefault"
REVISION "200409200000Z"
DESCRIPTION
"1. Added vlan-port as a new InterfaceType.
2. Created cbQosServicePolicyExtGroup."
REVISION "200404120000Z"
DESCRIPTION
"Added support for Estimate Bandwidth and its Corvil
implementation. Corvil's algorithm generates the
estimated bandwidth for a class of traffic from
knowledge of the QoS targets such as delay and drop,
and the observed traffic behavior."
REVISION "200307240000Z"
DESCRIPTION
"Added setIpDscpTunnel, setIpPrecedenceTunnel
to the PoliceAction TC.
Added srpPriority, frFecnBecn, ipDscpTunnel,
ipPrecedenceTunnel to the SetFeatureType TC.
Added l2Cos, atmClp to the REDMechanism TC.
Added cps to the CbQosRateType TC.
Added CbQosTMSetType TC.
Added cbQosQueueingCfgAggrQLimitTime
to the cbQosQueueingCfgTable.
Added cbQosREDClassCfgMinThresholdTime,
cbQosREDClassCfgMaxThresholdTime
to the cbQosREDClassCfgTable.
Added cbQosPoliceCfgCellRate,
cbQosPoliceCfgCellPir,
cbQosPoliceCfgBurstCell,
cbQosPoliceCfgExtBurstCell,
cbQosPoliceCfgBurstTime,
cbQosPoliceCfgExtBurstTime,
cbQosPoliceCfgCdvt,
cbQosPoliceCfgConformColor,
cbQosPoliceCfgExceedColor
to the cbQosPoliceCfgTable.
Added cbQosTSCfgBurstTime, cbQosTSCfgExtBurstTime
to the cbQosTSCfgTable.
Added cbQosSetCfgSrpPriority, cbQosSetCfgFrFecnBecn
to the cbQosSetCfgTable.
Added cbQosSetStatsTable.
Added cbQosPoliceColorStatsTable.
Added cbQosTableMapCfgTable.
Added cbQosTableMapValueCfgTable.
Added cbQosTableMapSetCfgTable."
REVISION "200306090000Z"
DESCRIPTION
"Added controlPlane to the InterfaceType TC.
Added cbQosEntityIndex to the cbQosServicePolicyTable."
REVISION "200301210000Z"
DESCRIPTION
"Added compression(9) in QosObjectType TC for IPHC;
Added setMplsExpTopMost(11) in PoliceAction TC for
POLICE;
Added mplsExpTopMost(8) in SetFeatureType TC for SET;
Added discardClass(13) in REDMechanism TC for WRED;
Added CbQosRateType TC for POLICE and SHAPE;
Added IPHCOption TC for IPHC;
Added cbQosPoliceCfgRateType,
cbQosPoliceCfgPercentRateValue,
cbQosPoliceCfgPercentPirValue for POLICE;
Added cbQosTSCfgRateType,
cbQosTSCfgPercentRateValue for SHAPE;
Added cbQosSetCfgMplsExpTopMostValue for SET;
Added cbQosIPHCCfg and cbQosIPHCStats tables for IPHC."
REVISION "200212030000Z"
DESCRIPTION
"Added new cbQosPoliceCfgRate64 to cbQosPoliceCfgEntry
table to support policing rates greater than fit in
the range defined for cbQosPoliceCfgRate"
REVISION "200207240000Z"
DESCRIPTION
"Added support for ECN; Pir policing; multiple
police actions; added MPLS-EXP/ATM-CLP/DR-DE/
L2Cos/DiscardClass marking in police action;
added MPLS-EXP and DiscardClass marking;
modified ATM-CLP and FR-DE marking.
Added objects to handle queue depth unit type and
queue depth pair related objects (e.g.,
cbQosQueueingCfgQLimitUnits and
cbQosQueueingCfgAggregateQLimit pair) to support
queue depth in different units."
REVISION "200103140000Z"
DESCRIPTION
"Added support for FR DE, ATM CLP and L2 marking.
Added Bandwidth remaining percent option"
REVISION "200012080000Z"
DESCRIPTION
"Added support for Police Violate counters and
DSCP WRED counters"
REVISION "200007130000Z"
DESCRIPTION
"Initial version of Class-based QoS configuration and
statistical parameters MIB"
::= { ciscoMgmt 166 }
-- Textual Conventions
QueueMechanism ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This denotes which mechanism is used with QueueLimit.
precedence Based on IP precedence
dscp Based on DSCP values
discardClass Based on discard class
qosGroup Based on qosgroup class
atmClp Based on atm-clp class
mplsExp Based on MPLS Experimental class"
SYNTAX INTEGER {
precedence(1),
dscp(2),
discardClass(3),
qosGroup(4),
atmClp(5),
mplsExp(6)
}
QosObjectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate different QoS objects .
policymap - The object in query is a PolicyMap, being
attached on a logical interface.
classmap - The object in query is a ClassMap, being
used by it's parent PolicyMap.
matchStatement - The object in query is a Match Statement,
being used by it's parent ClassMap.
queueing - The object in query is a queueing feature being
applied on the parent ClassMap.
randomDetect - The object in query is a Random Detect feature
being applied on the parent ClassMap.
trafficShaping - The object in query is a traffic-shaping
feature being applied on the parent ClassMap.
police - The object in query is a Police feature being
applied on the parent ClassMap.
set - The object in query is a Packet Marking
feature being applied on the parent ClassMap.
compression - The object in query is a IP header compression
feature being applied on the parent ClassMap.
ipslaMeasure - The object in query is Measure IPSLAs feature
being applied on the parent ClassMap.
account - The object in query is C3Pl_Account feature being
applied on the parent ClassMap."
SYNTAX INTEGER {
policymap(1),
classmap(2),
matchStatement(3),
queueing(4),
randomDetect(5),
trafficShaping(6),
police(7),
set(8),
compression(9),
ipslaMeasure(10),
account(11)
}
TrafficDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate whether the Policymap is for
Input or Output direction."
SYNTAX INTEGER {
input(1),
output(2)
}
QosClassInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate whether the Classmap is for
Match All or Match Any."
SYNTAX INTEGER {
none(1),
matchAll(2),
matchAny(3)
}
QosMatchInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate whether the MatchStatement is matching
on negated criteria (Match Not)."
SYNTAX INTEGER {
none(1),
matchNot(2)
}
InterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate the type of logical interface to which
a particular service policy is attached.
Main Interface - Service policy is attached on the main
interface.
Sub Interface - Service policy is attached on the sub
interface.
Frame Relay DLCI - Service policy is attached on the a
Frame Relay DLCI.
ATM VC - Service policy is attached on the an ATM
Virtual Circuit.
Control Plane - Service policy is attached to the control
plane of the device.
Vlan Port - Service policy is attached to a particular
vlan of a layer 2 interface that can carry
traffic on multiple vlans.
EVC - Service policy is attached to the Ethernet
Virtual Connections."
SYNTAX INTEGER {
mainInterface(1),
subInterface(2),
frDLCI(3),
atmPVC(4),
controlPlane(5),
vlanPort(6),
evc(7)
}
QueueingBandwidthUnits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The units of the bandwidth, used to allocate
bandwidth. Bandwidth can be either an absolute kbps
number, or be expressed as a percentage of the
available bandwidth.
kbps Allocated bandwidth in Kilo bits Per Second
percentage Allocated bandwidth as percentage of
reference bandwidth.
percentageRemaining Percentage of unallocated bandwidth
reserved for this class.
ratioRemaining Ratio of unallocated bandwidth reserved
for this class (in relation to other
classes).
perThousand Allocated bandwidth in Parts Per Thousand
perMillion Allocated bandwidth in Parts Per Million."
SYNTAX INTEGER {
kbps(1),
percentage(2),
percentageRemaining(3),
ratioRemaining(4),
perThousand(5),
perMillion(6)
}
TrafficShapingLimit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The limit used by the traffic-shaping feature.
This value may be 'average' or 'peak',
which indicates whether it is shaping by average
rate or peak rate."
SYNTAX INTEGER {
average(1),
peak(2)
}
PoliceAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The available actions taken on packets upon
conforming, exceeding or violating the configured
police rate.
Transmit - Transmit the packet if the packet conforms
or exceeds the configured police rate.
Set IP DSCP - Set the IP DSCP value if the packet
conforms or exceeds the configured police
rate.
Set IP Precedence - Set the IP precedence value if
the packet conforms or exceeds
the configured police rate.
Set Qos Group - Set the QoS Group value if
the packet conforms or exceeds
the configured police rate.
Set MPLS Exp - Set the MPLS Experimental Imposition
vaule for the applicable action.
Set ATM CLP - Set the ATM CLP bit for the
applicable action.
Set FR DE - Set the FR DE bit for the
applicable action.
Set L2 COS - Set the 802.1p priority field in 802.1Q
VLAN tag for the applicable action.
Set Discard Class - Set the Discard Class value for the
applicable action.
Drop - Drop the packet if the packet conforms or
exceeds the configured police rate.
Set MPLS Exp TopMost - Set the MPLS Experimental
TopMost vaule for the applicable action.
Set IP DSCP Tunnel - Set the IP DSCP Tunnel
value for the applicable action.
Set IP Precedence Tunnel - Set the IP Precedence Tunnel
value for the applicable action.
Set Inner L2 COS - Set the 802.1p priority field in inner
802.1q VLAN tag (QinQ) for the applicable
action.
Unconfigured - No action is set for this police.
Set Dei - Set the DEI(Discard Eligiable Indicator) bit in the
topmost 802.1ad header.
Set Dei Imposition - Set the DEI bit on all imposed 802.1ad
header.
Set SRP Priority - Sets the spatial reuse protocol (SRP)
priority value of an outgoing packet."
SYNTAX INTEGER {
transmit(1),
setIpDSCP(2),
setIpPrecedence(3),
setQosGroup(4),
drop(5),
setMplsExp(6),
setAtmClp(7),
setFrDe(8),
setL2Cos(9),
setDiscardClass(10),
setMplsExpTopMost(11),
setIpDscpTunnel(12),
setIpPrecedenceTunnel(13),
setL2CosInner(14), -- QinQ inner L2 CoS
unconfigured(15),
setDei(16),
setDeiImposition(17),
setSrpPriority(18)
}
SetFeatureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Bit-wise representation of packet marking feature available
today. For historical reason, both packet marking and SET
terms have been used across Cisco Class-Based QOS, but they
have the same meaning. This feature is used to mark/set
appropriate fields(e.g, dscp, precedence, mpls-experimental
-topmost,l2CosInner) for applicable packets.
ipDscp Packet set/mark with DSCP bit
ipPrecedence Packet set/mark with Precedence bit
qosGroupNumber Packet set/mark with QosGroup bit
frDeBit Packet set/mark with FR-DE bit
l2Cos Packet set/mark with COS bit
mplsExp Packet set/mark with MPLS Experimental bit
discardClass Packet set/mark with discard class bit
mplsExpTopMost Packet set/mark with MPLS Experimental
topmost bit
srpPriority Packet set/mark with srp priority bit
frFecnBecn Packet set/mark with FECN bit
ipDscpTunnel Packet set/mark with DSCP tunnel bit
ipPrecedenceTunnel Packet set/mark with Precedence tunnel bit
l2CosInner Packet set/mark with COS inner bit
dei Packet set/mark with DEI bit
deiImposition Packet set/mark with DEI Imposition bit"
SYNTAX BITS {
ipDscp(0),
ipPrecedence(1),
qosGroupNumber(2),
frDeBit(3),
atmClpBit(4),
l2Cos(5),
mplsExp(6),
discardClass(7),
mplsExpTopMost(8),
srpPriority(9),
frFecnBecn(10),
ipDscpTunnel(11),
ipPrecedenceTunnel(12),
l2CosInner(13),
dei(14),
deiImposition(15)
}
REDMechanism ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This denotes which mechanism is used with RED.
precedence Based on IP precedence
dscp Based on DSCP values
discardClass Based on discard class
l2Cos Based on L2-COS class
atmClp Based on ATM-CLP class
mplsExp Based on MPLS Experimental values
redDefault Default RED profile
redUserDefault User specified Default RED profile
dei Based on DEI bit"
SYNTAX INTEGER {
precedence(1),
dscp(2),
discardClass(3),
l2Cos(4),
atmClp(5),
mplsExp(6),
redDefault(7),
redUserDefault(8),
dei(9)
}
CbQosQueueUnitType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents an unit type of queue
size.
packets(1) Represents the UNITS of 'packets' for
queue size.
cells(2) Represents the UNITS of 'cells' for
queue size.
bytes(3) Represents the UNITS of 'bytes' for
queue size.
ms(4) Represents the UNITS of 'milli-seconds' for
queue size
us(5) Represents the UNITS of 'micro-seconds' for
queue size
percentage(6) Represents the UNITS of 'percentage' for
queue size
To support future extensions, the CbQosQueueUnitType
textual convention SHOULD NOT be sub-typed in object
type definitions.
It MAY be sub-typed in compliance statements in order to
require only a subset of these queue size types for a
compliant implementation.
Implementations must ensure that CbQosQueueUnitType
objects and any dependent object (e.g. CbQosQueueDepth)
are consistent. An inconsistentValue error must be
generated if an attempt to change an CbQosQueueUnitType
object would lead to an undefined CbQosQueueDepth value.
In particular, CbQoSQueueUnitType/CbQosQueueDepth pairs
must be changed together if the CbQosQueueUnitType
type changes (e.g. from packets(1) to cells(2))."
SYNTAX INTEGER {
packets(1),
cells(2),
bytes(3),
ms(4),
us(5),
percentage(6)
}
CbQosQueueDepth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Queue depth value.
An CbQoSQueueDepth value is always interpreted within
the context of an CbQosQueueUnitType value. Every usage
of the CbQosQueueDepth textual convention is required to
specify the CbQosQueueUnitType object which provides
the context. It is suggested that the
CbQoSQueueUnitType object is logically registered
before the object(s) which use the CbQosQueueDepth
textual convention if they appear in the same logical
row. The value of an CbQosQueueDepth object must always
be consistent with the value of the associated
CbQosQueueUnitType object. Attempts to set an
CbQosQueueDepth object to a value which is inconsistent
with the associated CbQosQueueUnitType must fail with
an inconsistentValue error."
SYNTAX Unsigned32
CbQosRateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of rate. Rate type can be either an
absolute bps number, or be expressed as a percentage
of the available interface bandwidth, or an absolute
cps number.
bps Bits Per Second
percentage %
cps Cells Per Second
perThousand Parts Per Thousand
perMillion Parts Per Million"
SYNTAX INTEGER {
bps(1),
percentage(2),
cps(3),
perThousand(4),
perMillion(5)
}
IPHCOption ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate the type of IP header compression.
rtp(1) UDP/RTP compression.
tcp(2) TCP compression.
bothRtpTcp(3) Both UDP/RTP and TCP compression."
SYNTAX INTEGER {
rtp(1),
tcp(2),
bothRtpTcp(3)
}
CbQosTMSetType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The available packet marking types which can use
tablemap to establish to-from relationship for
enhanced packeting marking."
SYNTAX INTEGER {
none(0),
ipDscp(1),
ipPrecedence(2),
qosGroup(3),
l2Cos(4),
mplsExpImp(5),
mplsExpTop(6)
}
CbQosEBType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that indicates the type of bandwidth
estimate algorithm.
typeNone no algorithm is selected
typeCorvil algorithm based on Corvil
bandwidth calculation."
SYNTAX INTEGER {
typeNone(0),
typeCorvil(1)
}
CbQosEBCtd ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A CTD (Corvil Traffic Descriptor) specific value."
SYNTAX OCTET STRING
SetC3plAccountFeatureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate drop types for C3PL Account action."
SYNTAX INTEGER {
queueing(0),
wred(1),
police(2)
}
-- Overview of MIB Objects:
--
-- Defines 2 groups of objects.
ciscoCBQosMIBObjects OBJECT IDENTIFIER
::= { ciscoCBQosMIB 1 }
ciscocbQosMIBConformance OBJECT IDENTIFIER
::= { ciscoCBQosMIB 2 }
-- object groups
cbQosServicePolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 1 }
cbQosInterfacePolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 2 }
cbQosFrameRelayVCPolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 3 }
cbQosATMPVCPolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 4 }
cbQosObjects OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 5 }
cbQosPolicyMapCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 6 }
cbQosClassMapCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 7 }
cbQosMatchStmtCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 8 }
cbQosQueueingCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 9 }
cbQosREDCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 10 }
cbQosREDClassCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 11 }
cbQosPoliceCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 12 }
cbQosTSCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 13 }
cbQosSetCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 14 }
cbQosClassMapStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 15 }
cbQosMatchStmtStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 16 }
cbQosPoliceStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 17 }
cbQosQueueingStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 18 }
cbQosTSStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 19 }
cbQosREDClassStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 20 }
cbQosPoliceActionCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 21 }
cbQosIPHCCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 22 }
cbQosIPHCStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 23 }
cbQosSetStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 24 }
cbQosPoliceColorStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 25 }
cbQosTableMapCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 26 }
cbQosTableMapValueCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 27 }
cbQosTableMapSetCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 28 }
cbQosEBCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 29 }
cbQosEBStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 30 }
cbQosMeasureIPSLACfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 31 }
cbQosQueueingClassCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 32 }
cbQosC3plAccountCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 33 }
cbQosC3plAccountStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 34 }
-- The cbQosQueueingClass group
cbQosQueueingClassCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosQueueingClassCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the configuration information for weighted
queue limit action per IP precedence basis."
::= { cbQosQueueingClassCfg 1 }
cbQosQueueingClassCfgEntry OBJECT-TYPE
SYNTAX CbQosQueueingClassCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a weighted queueing action. The information
includes: Threshold value, Units and wieght Type
(ip,dscp,mplsExp)
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex(which refers to cbQosConfigIndex of
cbQosQueueingCfgEntry) and cbQosQueueingClassConfigIndex
cbQosQlimitWeightValue
i.e(prec,dscp,discard-class,qos-group,atm-clp,
mplsExp) of each Weighted Queueing Action."
INDEX {
cbQosConfigIndex,
cbQosQueueingClassConfigIndex,
cbQosQlimitWeightValue
}
::= { cbQosQueueingClassCfgTable 1 }
CbQosQueueingClassCfgEntry ::= SEQUENCE {
cbQosQueueingClassConfigIndex Integer32,
cbQosQlimitWeightValue Integer32,
cbQosQueueingClassCfgThreshold CbQosQueueDepth,
cbQosQueueingClassCfgThresholdUnit CbQosQueueUnitType,
cbQosQueueingClassCfgQLimitWeight QueueMechanism
}
cbQosQueueingClassConfigIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This objects depict the config index for Weighted Queue limit
configured."
::= { cbQosQueueingClassCfgEntry 1 }
cbQosQlimitWeightValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object depict the weight value configured for
weighted Queue-limit.
The Weight value is IP precedence or IP DSCP of this entry."
::= { cbQosQueueingClassCfgEntry 2 }
cbQosQueueingClassCfgThreshold OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to depict the Threshold value for the
Weighted Queue Limit."
::= { cbQosQueueingClassCfgEntry 3 }
cbQosQueueingClassCfgThresholdUnit OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to depict the Threshold Unit for the
Weighted Queue Limit"
::= { cbQosQueueingClassCfgEntry 4 }
cbQosQueueingClassCfgQLimitWeight OBJECT-TYPE
SYNTAX QueueMechanism
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects depict the weight value for Weighted Queue limit
configured
i.e(precedence,dscp,qos-group,atm-clp,discard-class,mplsExp)
."
::= { cbQosQueueingClassCfgEntry 5 }
-- End of cbQosQueueingClass group
cbQosMeasureIPSLACfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosMeasureIPSLACfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies configuration information for measure type
IPSLA action. The measure action relates the policy class to a
specific IPSLAs auto group. Configuration of measure action of
type IPSLA results in automatic generation of IPSLAs synthetic
test operations when the policy is attached to interface. The
operations are created according to the characteristics
specified and to the destinations specified in IPSLA auto group.
The IPSLAs sythentic test operations measure network statistics
such as latency, packet loss and jitter.
This table is to be used only for retrieving the measure
action configuration information."
::= { cbQosMeasureIPSLACfg 1 }
cbQosMeasureIPSLACfgEntry OBJECT-TYPE
SYNTAX CbQosMeasureIPSLACfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry describes configuration information about
one instance of IPSLAs measure action in the policy map.
The table is indexed by the cbQosConfigIndex and
cbQosMeasureIPSLACfgGroupIndex."
INDEX {
cbQosConfigIndex,
cbQosMeasureIPSLACfgGroupIndex
}
::= { cbQosMeasureIPSLACfgTable 1 }
CbQosMeasureIPSLACfgEntry ::= SEQUENCE {
cbQosMeasureIPSLACfgGroupIndex Unsigned32,
cbQosMeasureIPSLACfgGroupName DisplayString
}
cbQosMeasureIPSLACfgGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for each
instance of IPSLAs measure action. The index is unique
for each instance for a particular class in particular
policy-map. For example consider following configuration:
policy-map p1
class c1
measure type ip-sla group g1
measure type ip-sla group g2
class c2
measure type ip-sla group g3
In this case the cbQosMeasureIPSLACfgGroupIndex value
for first measure action instance under class c1 will be 1,
for second instance it will be 1, and so on. The value
for the index will start over again from 1 for class c2."
::= { cbQosMeasureIPSLACfgEntry 1 }
cbQosMeasureIPSLACfgGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPSLAs auto group name. Group is an aggregation of
operations sharing the same type, for example udp-jitter
type, with common characteristics like frequency,
interval etc. Groups are formed by policies dictated
either by customer, or by service level or any other
requirements."
::= { cbQosMeasureIPSLACfgEntry 2 }
-- The cbQosServicePolicy group
cbQosServicePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosServicePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the logical interfaces/media types
and the policymap that are attached to it."
::= { cbQosServicePolicy 1 }
cbQosServicePolicyEntry OBJECT-TYPE
SYNTAX CbQosServicePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes to which a logical
interface a given policymap is attached. Depending on
the logical interface/media type, some fields may have
meaningful values, and some may not. Please see each
individual descriptions."
INDEX { cbQosPolicyIndex }
::= { cbQosServicePolicyTable 1 }
CbQosServicePolicyEntry ::= SEQUENCE {
cbQosPolicyIndex Unsigned32,
cbQosIfType InterfaceType,
cbQosPolicyDirection TrafficDirection,
cbQosIfIndex InterfaceIndex,
cbQosFrDLCI DlciNumber,
cbQosAtmVPI Unsigned32,
cbQosAtmVCI Unsigned32,
cbQosEntityIndex EntPhysicalIndexOrZero,
cbQosVlanIndex VlanIndex,
cbQosEVC Unsigned32,
cbQosPolicyDiscontinuityTime TimeStamp,
cbQosParentPolicyIndex Unsigned32
}
cbQosPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
service policies (PolicyMap that has been attached
to a given logical interface)."
::= { cbQosServicePolicyEntry 1 }
cbQosIfType OBJECT-TYPE
SYNTAX InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This describes the logical interface/media type to
which this service policy is attached."
::= { cbQosServicePolicyEntry 2 }
cbQosPolicyDirection OBJECT-TYPE
SYNTAX TrafficDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the direction of traffic for which
this service policy is applied."
::= { cbQosServicePolicyEntry 3 }
cbQosIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ifIndex for the interface to which this service
is attached. This field makes sense only if the
logical interface has a snmp ifIndex. For e.g. the
value of this field is meaningless when the
cbQosIfType is controlPlane."
::= { cbQosServicePolicyEntry 4 }
cbQosFrDLCI OBJECT-TYPE
SYNTAX DlciNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DLCI for the FRVC to which this service is attached.
This field only make sense if the service policy is
attached to a Frame Relay DLCI."
::= { cbQosServicePolicyEntry 5 }
cbQosAtmVPI OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC."
::= { cbQosServicePolicyEntry 6 }
cbQosAtmVCI OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VCI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC."
::= { cbQosServicePolicyEntry 7 }
cbQosEntityIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In cases where the policy is attached to an entity
e.g. control-plane, this object represents the
entity physical index of the entity to which the
policy has been attached. A value zero may be
returned if the policy is not attached to a physical
entity or the entPhysicalTable is not supported on
the SNMP agent."
::= { cbQosServicePolicyEntry 8 }
cbQosVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the service policy is attached to a particular
vlan on a trunk or multi-vlan access port, then this
object specifies the corresponding VLAN. In all other
cases the value of this object is '0'."
::= { cbQosServicePolicyEntry 9 }
cbQosEVC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"for the EVC to which this service is attached.
This field only make sense if the service policy is
attached to an EVC."
::= { cbQosServicePolicyEntry 10 }
cbQosPolicyDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
any one or more objects of cbQosServicePolicyEntry table for a
given instance suffered a discontinuity. If no such
discontinuities have occurred since the last re-initialization
of the local management subsystem, this object contains a zero
value."
::= { cbQosServicePolicyEntry 11 }
cbQosParentPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value refering to service-policy index of a virtual
interface on which PolicyMap applied directly. Value set would
imply the entry is for a physical interface which is a member
of a virtual interface. Value zero implies the entry is for a
interface on which PolicyMap applied directly."
::= { cbQosServicePolicyEntry 12 }
-- End of the cbQosServicePolicy group
--
--
-- Beginning of cbQosInterfaceTable
cbQosInterfacePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosInterfacePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the service polices that are
attached to main and sub interfaces."
::= { cbQosInterfacePolicy 1 }
cbQosInterfacePolicyEntry OBJECT-TYPE
SYNTAX CbQosInterfacePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Using ifIndex and Direction, each unique index pair
translates to a service policy that is attached to a
main/sub interface, for particular traffic direction."
INDEX {
ifIndex,
cbQosPolicyDirection
}
::= { cbQosInterfacePolicyTable 1 }
CbQosInterfacePolicyEntry ::= SEQUENCE {
cbQosIFPolicyIndex Unsigned32
}
cbQosIFPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex."
::= { cbQosInterfacePolicyEntry 1 }
-- End of cbQosInterfaceTable
--
-- Beginning of cbQosFrameRelayVCPolicy
cbQosFrameRelayPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosFrameRelayPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the service polices that are
attached to Frame Relay DLCIs."
::= { cbQosFrameRelayVCPolicy 1 }
cbQosFrameRelayPolicyEntry OBJECT-TYPE
SYNTAX CbQosFrameRelayPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Using ifIndex, FR DLCI, and Direction, each unique
index combination translates to a service policy that
is attached to a FR DLCI, for particular traffic direction."
INDEX {
ifIndex,
cbQosFrDLCI,
cbQosPolicyDirection
}
::= { cbQosFrameRelayPolicyTable 1 }
CbQosFrameRelayPolicyEntry ::= SEQUENCE {
cbQosFRPolicyIndex Unsigned32
}
cbQosFRPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex."
::= { cbQosFrameRelayPolicyEntry 1 }
-- End of cbQosFrameRelayTable
--
--
-- Beginning of cbQosATMPVCPolicy
cbQosATMPVCPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosATMPVCPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the policies that are attached to a
ATM PVC."
::= { cbQosATMPVCPolicy 1 }
cbQosATMPVCPolicyEntry OBJECT-TYPE
SYNTAX CbQosATMPVCPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Using ifIndex, VPI, VCI, and Direction, each unique
index combination translates to a service policy that
is attached to a ATM VC, for particular traffic direction."
INDEX {
ifIndex,
cbQosAtmVPI,
cbQosAtmVCI,
cbQosPolicyDirection
}
::= { cbQosATMPVCPolicyTable 1 }
CbQosATMPVCPolicyEntry ::= SEQUENCE {
cbQosATMPolicyIndex Unsigned32
}
cbQosATMPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex."
::= { cbQosATMPVCPolicyEntry 1 }
-- End of cbQosATMPVCTable
--
--
-- The cbQosObjects group
--
-- cbQosObjects Table
cbQosObjectsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies QoS objects (classmap, policymap,
match statements, and actions) hierarchy. This table also
provide relationship between each PolicyIndex/ObjectsIndex
pair and the ConfigIndex. ConfigIndex is essential for
querying any configuration tables."
::= { cbQosObjects 1 }
cbQosObjectsEntry OBJECT-TYPE
SYNTAX CbQosObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A QoS object entry. Objects covered in this table are
PolicyMap, ClassMap, Match Statements, and Actions.
Each entry is indexed by system-generated cbQosPolicyIndex,
and cbQosObjectsIndex, which represents a runtime instance
of a QoS object. In conjunction with the
cbQosParentObjectsIndex, a management station can
determine the hierarchical relationship of those QoS
objects. Given that classmaps and service policies can
be nested entites, each entry in this table represents a
unique instance of such object. Each runtime object
instance has a corresponding config object, which contains
the configuration information of such QoS object. The
config object is indexed by cbQosConfigIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosObjectsTable 1 }
CbQosObjectsEntry ::= SEQUENCE {
cbQosObjectsIndex Unsigned32,
cbQosConfigIndex Unsigned32,
cbQosObjectsType QosObjectType,
cbQosParentObjectsIndex Unsigned32
}
cbQosObjectsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) instance specific
index for cbQosObjectsEntry."
::= { cbQosObjectsEntry 1 }
cbQosConfigIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) config (instance
independent) index for each Object. Each objects having
the same configuration share the same config index."
::= { cbQosObjectsEntry 2 }
cbQosObjectsType OBJECT-TYPE
SYNTAX QosObjectType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the QoS object."
::= { cbQosObjectsEntry 3 }
cbQosParentObjectsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent instance index of a QoS object.
For a ClassMap, the parent index would be the index of
the attached PolicyMap.
For a Match Statement, the parent index would be the
index of the ClassMap that uses this Match Statement.
For an action, the parent index would be the
index of the ClassMap that applies such Action.
For a non-hierarchical PolicyMap, the parent would be
the logical interface to which the policy is attached,
thus the parent index would be 0.
For a hierarchical PolicyMap, the parent index would
be the index of the ClassMap to which the nested
policy is attached."
::= { cbQosObjectsEntry 4 }
-- end of cbQosObjectsTable
--
--
-- Start of cbQosPolicyMapCfgTable
cbQosPolicyMapCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPolicyMapCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Policymap configuration information"
::= { cbQosPolicyMapCfg 1 }
cbQosPolicyMapCfgEntry OBJECT-TYPE
SYNTAX CbQosPolicyMapCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a policymap. The information includes: Name, and it's
description. This table contains configuration information
only, no statistics associated with it. Therefore, it is
indexed by the cbQosConfigIndex of each PolicyMap."
INDEX { cbQosConfigIndex }
::= { cbQosPolicyMapCfgTable 1 }
CbQosPolicyMapCfgEntry ::= SEQUENCE {
cbQosPolicyMapName DisplayString,
cbQosPolicyMapDesc DisplayString
}
cbQosPolicyMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Policymap."
::= { cbQosPolicyMapCfgEntry 1 }
cbQosPolicyMapDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the PolicyMap."
::= { cbQosPolicyMapCfgEntry 2 }
-- Start of cbQosPolicyMapCfgTable
--
--
-- Start of cbQosCMCfg Group
cbQosCMCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosCMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ClassMap configuration information"
::= { cbQosClassMapCfg 1 }
cbQosCMCfgEntry OBJECT-TYPE
SYNTAX CbQosCMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a classmap. The information includes: Name, and it's
description and whether it is a Match-All or Match-Any
class. This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each ClassMap."
INDEX { cbQosConfigIndex }
::= { cbQosCMCfgTable 1 }
CbQosCMCfgEntry ::= SEQUENCE {
cbQosCMName DisplayString,
cbQosCMDesc DisplayString,
cbQosCMInfo QosClassInfo
}
cbQosCMName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Classmap."
::= { cbQosCMCfgEntry 1 }
cbQosCMDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the Classmap."
::= { cbQosCMCfgEntry 2 }
cbQosCMInfo OBJECT-TYPE
SYNTAX QosClassInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Match all vs Match any in a given class."
::= { cbQosCMCfgEntry 3 }
-- End of cbQosCMCfg Group
--
--
-- Start of cbQosMatchStmtCfgTable
cbQosMatchStmtCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosMatchStmtCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ClassMap configuration information"
::= { cbQosMatchStmtCfg 1 }
cbQosMatchStmtCfgEntry OBJECT-TYPE
SYNTAX CbQosMatchStmtCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a MatchStatement. The information includes: Name,
and whether it is a Match or Match-Not
statement. This table contains configuration information
only, no statistics associated with it. Therefore, it is
indexed by the cbQosConfigIndex of each MatchStatement."
INDEX { cbQosConfigIndex }
::= { cbQosMatchStmtCfgTable 1 }
CbQosMatchStmtCfgEntry ::= SEQUENCE {
cbQosMatchStmtName DisplayString,
cbQosMatchStmtInfo QosMatchInfo
}
cbQosMatchStmtName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Match Statement."
::= { cbQosMatchStmtCfgEntry 1 }
cbQosMatchStmtInfo OBJECT-TYPE
SYNTAX QosMatchInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Match vs Match Not in a given class."
::= { cbQosMatchStmtCfgEntry 2 }
-- End of cbQosMatchStmtCfgTable
--
--
-- Start of cbQosQueueingCfgTable
cbQosQueueingCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosQueueingCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Queueing Action configuration
information"
::= { cbQosQueueingCfg 1 }
cbQosQueueingCfgEntry OBJECT-TYPE
SYNTAX CbQosQueueingCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a queueing action. The information
includes: Bandwidth, Units, Flow Enabled, Priority Enabled,
and Q size.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each Queueing Action."
INDEX { cbQosConfigIndex }
::= { cbQosQueueingCfgTable 1 }
CbQosQueueingCfgEntry ::= SEQUENCE {
cbQosQueueingCfgBandwidth Integer32,
cbQosQueueingCfgBandwidthUnits QueueingBandwidthUnits,
cbQosQueueingCfgFlowEnabled TruthValue,
cbQosQueueingCfgPriorityEnabled TruthValue,
cbQosQueueingCfgAggregateQSize Integer32,
cbQosQueueingCfgIndividualQSize Integer32,
cbQosQueueingCfgDynamicQNumber Integer32,
cbQosQueueingCfgPrioBurstSize Unsigned32,
cbQosQueueingCfgQLimitUnits CbQosQueueUnitType,
cbQosQueueingCfgAggregateQLimit CbQosQueueDepth,
cbQosQueueingCfgAggrQLimitTime Unsigned32,
cbQosQueueingCfgPriorityLevel Unsigned32,
cbQosQueueingCfgBandwidth64 Unsigned64,
cbQosQueueingCfgIndividualQSize64 Unsigned64
}
cbQosQueueingCfgBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..2000000)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The type of bandwidth configuration value represented by this
object is indicated by the value of
cbQosQueueingCfgBandwidthUnits for this entry.
If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or
'percentage(2)', this object represents the configured
bandwidth allocated to this traffic class.In the case of a
bandwidth policy, this value represents a minimum bandwidth
guarantee for the traffic class. In the case of a priority
policy, this value represents the maximum rate at which
priority service is guaranteed.
If the cbQosQueueingCfgBandwidthUnits value is
'percentageRemaining(3)', this object represents the
the percentage of the unallocated bandwidth to allocate to
this class. If the cbQosQueueingCfgBandwidthUnits value is
'ratioRemaining(4)', this object represents the ratio value,
relative to other class' configured ratio values, used to
determine the portion of the unallocated bandwidth to apply to
this class.
cbQosQueueingCfgBandwidth object is superseded by
cbQosQueueingCfgBandwidth64."
::= { cbQosQueueingCfgEntry 1 }
cbQosQueueingCfgBandwidthUnits OBJECT-TYPE
SYNTAX QueueingBandwidthUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of the accompanying cbQosQueueingCfgbandwidth
parameter"
::= { cbQosQueueingCfgEntry 2 }
cbQosQueueingCfgFlowEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if flow-based fair-queue is
enabled for this class."
::= { cbQosQueueingCfgEntry 3 }
cbQosQueueingCfgPriorityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if low latency queueing
(priority) is enabled for this class."
::= { cbQosQueueingCfgEntry 4 }
cbQosQueueingCfgAggregateQSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum number of packets that can be held in all the
individual queues associated with this class
before packets are dropped.
cbQosQueueingCfgAggregateQSize object is superseded by
cbQosQueueingCfgAggregateQLimit."
::= { cbQosQueueingCfgEntry 5 }
cbQosQueueingCfgIndividualQSize OBJECT-TYPE
SYNTAX Integer32 (1..32768)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
This field only makes sense in the context of
Flow-based fair-queueing.
cbQosQueueingCfgIndividualQSize object is superseded by
cbQosQueueingCfgIndividualQSize64."
::= { cbQosQueueingCfgEntry 6 }
cbQosQueueingCfgDynamicQNumber OBJECT-TYPE
SYNTAX Integer32 (1..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dynamic queues supported when
flow-based fair-queue is in use."
::= { cbQosQueueingCfgEntry 7 }
cbQosQueueingCfgPrioBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (32..64000000)
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In the priority queue, this is the number of bytes
allowed in a single burst.
This parameter only makes sense if Priority is enabled"
::= { cbQosQueueingCfgEntry 8 }
cbQosQueueingCfgQLimitUnits OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type of
cbQosQueueingCfgAggregateQLimit object."
::= { cbQosQueueingCfgEntry 9 }
cbQosQueueingCfgAggregateQLimit OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum allowed queue size for all the individual
queues associated with this class. When the queue size
exceed this value, the packets will be dropped."
::= { cbQosQueueingCfgEntry 10 }
cbQosQueueingCfgAggrQLimitTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum allowed queue size in milli-seconds for all
individual queues associated with this class. It
is internally converted to bytes by using the
bandwidth that is available for the class."
::= { cbQosQueueingCfgEntry 11 }
cbQosQueueingCfgPriorityLevel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority level of the queue into which packets matching
this class are queued into. A larger priority level indicates
higher priority."
::= { cbQosQueueingCfgEntry 12 }
cbQosQueueingCfgBandwidth64 OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the guaranteed bandwidth for a particular
traffic class.
The type of bandwidth configuration value represented by this
object is indicated by the value of
cbQosQueueingCfgBandwidthUnits.
If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or
'percentage(2)', this object represents the configured
bandwidth allocated to this traffic class.In the case of a
bandwidth policy, this value represents a minimum bandwidth
guarantee for the traffic class. In the case of a priority
policy, this value represents the maximum rate at which
priority service is guaranteed.
If the cbQosQueueingCfgBandwidthUnits value is
'percentageRemaining(3)', this object represents the
the percentage of the unallocated bandwidth to allocate to
this class. If the cbQosQueueingCfgBandwidthUnits value is
'ratioRemaining(4)', this object represents the ratio value,
relative to other class' configured ratio values, used to
determine the portion of the unallocated bandwidth to apply to
this class.
If a device implements cbQosQueueingCfgBandwidth64, it should
not implement cbQosQueueingCfgBandwidth."
::= { cbQosQueueingCfgEntry 13 }
cbQosQueueingCfgIndividualQSize64 OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
If a device implements cbQosQueueingCfgIndividualQSize64, then
it should not implement cbQosQueueingCfgIndividualQSize."
::= { cbQosQueueingCfgEntry 14 }
-- End of cbQosQueueingCfg Group
--
--
-- The cbQosREDCfg group
--
-- cbQosREDTable
cbQosREDCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosREDCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies WRED Action configuration
information"
::= { cbQosREDCfg 1 }
cbQosREDCfgEntry OBJECT-TYPE
SYNTAX CbQosREDCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a WRED Action. The table holds global
(per traffic class) configuration like: Expon Weight
and Mean Q size.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each WRED Action."
INDEX { cbQosConfigIndex }
::= { cbQosREDCfgTable 1 }
CbQosREDCfgEntry ::= SEQUENCE {
cbQosREDCfgExponWeight Integer32,
cbQosREDCfgMeanQsize Integer32,
cbQosREDCfgDscpPrec REDMechanism,
cbQosREDCfgECNEnabled TruthValue
}
cbQosREDCfgExponWeight OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The decay factor for the queue average calculation.
The decay factor is equal to raising 2 to the power
of N, where N could be up to 16.
The smaller the number, the faster it decays."
::= { cbQosREDCfgEntry 1 }
cbQosREDCfgMeanQsize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average queue size, computed and used by the WRED
algorithm.
cbQosREDCfgMeanQsize object is superseded by
cbQosREDMeanQsize."
::= { cbQosREDCfgEntry 2 }
cbQosREDCfgDscpPrec OBJECT-TYPE
SYNTAX REDMechanism
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Classification mechanism used by RED"
::= { cbQosREDCfgEntry 3 }
cbQosREDCfgECNEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if explicit congestion notification
enabled for this class."
::= { cbQosREDCfgEntry 4 }
-- end of cbQosREDCfgTable
--
--
-- cbQosREDClassCfg Group
cbQosREDClassCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosREDClassCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies WRED Action configuration
information on a per IP precedence basis."
::= { cbQosREDClassCfg 1 }
cbQosREDClassCfgEntry OBJECT-TYPE
SYNTAX CbQosREDClassCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a WRED Action. The table holds the per IP precedence
based WRED configuration parameters.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex and cbQosREDValue
of each WRED Action."
INDEX {
cbQosConfigIndex,
cbQosREDValue
}
::= { cbQosREDClassCfgTable 1 }
CbQosREDClassCfgEntry ::= SEQUENCE {
cbQosREDValue Integer32,
cbQosREDCfgMinThreshold Integer32,
cbQosREDCfgMaxThreshold Integer32,
cbQosREDCfgPktDropProb Integer32,
cbQosREDClassCfgThresholdUnit CbQosQueueUnitType,
cbQosREDClassCfgMinThreshold CbQosQueueDepth,
cbQosREDClassCfgMaxThreshold CbQosQueueDepth,
cbQosREDClassCfgMinThresholdTime Unsigned32,
cbQosREDClassCfgMaxThresholdTime Unsigned32,
cbQosREDClassCfgMaxThresholdUnit CbQosQueueUnitType,
cbQosREDClassCfgMinThresholdUnit CbQosQueueUnitType
}
cbQosREDValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP precedence or IP DSCP of this entry."
::= { cbQosREDClassCfgEntry 1 }
cbQosREDCfgMinThreshold OBJECT-TYPE
SYNTAX Integer32 (1..32768)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Minimum threshold in number of packets. When the
average queue length reaches this number, WRED begins
to drop packets with the specified IP precedence.
cbQosREDCfgMinThreshold object is superseded by
cbQosREDClassCfgMinThreshold."
::= { cbQosREDClassCfgEntry 2 }
cbQosREDCfgMaxThreshold OBJECT-TYPE
SYNTAX Integer32 (1..32768)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum threshold in number of packets. When the
average queue length exceeds this number, WRED drops
all packets with the specified IP precedence.
cbQosREDCfgMaxThreshold object is superseded by
cbQosREDClassCfgMaxThreshold."
::= { cbQosREDClassCfgEntry 3 }
cbQosREDCfgPktDropProb OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denominator for the fraction of packets dropped when
the average queue depth is MaxDepthThreshold. For
example, if the denominator is 10, one out of every 10
packets is dropped when the average queue is at the
MaxDepthThreshold."
::= { cbQosREDClassCfgEntry 4 }
cbQosREDClassCfgThresholdUnit OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Represents the unit type to measure the RED thresholds.
The objects covered are cbQosREDClassCfgMinThreshold
and cbQosREDClassCfgMaxThreshold
cbQosREDClassCfgThresholdUnit object is superseded by
cbQosREDClassCfgMinThreshold, cbQosREDClassCfgMaxThreshold."
::= { cbQosREDClassCfgEntry 5 }
cbQosREDClassCfgMinThreshold OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum WRED threshold value. When the average
queue length reaches this number, WRED begins to
drop packets according to REDMechanism specificed
in cbQosREDCfgDscpPrec."
::= { cbQosREDClassCfgEntry 6 }
cbQosREDClassCfgMaxThreshold OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum WRED threshold value. When the average
queue length exceeds this number, WRED drops all
packets according to REDMechanism specificed
in cbQosREDCfgDscpPrec."
::= { cbQosREDClassCfgEntry 7 }
cbQosREDClassCfgMinThresholdTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum WRED threshold value specified in
milli-seconds. The milli-second value is internally
converted to bytes by using the bandwidth that
is available for the class."
::= { cbQosREDClassCfgEntry 8 }
cbQosREDClassCfgMaxThresholdTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum WRED threshold value specified in
milli-seconds. The milli-second value is internally
converted to bytes by using the bandwidth that
is available for the class."
::= { cbQosREDClassCfgEntry 9 }
cbQosREDClassCfgMaxThresholdUnit OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type to measure the RED Maximum thresholds.
The objects covered is cbQosREDClassCfgMaxThreshold"
::= { cbQosREDClassCfgEntry 10 }
cbQosREDClassCfgMinThresholdUnit OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type to measure the RED Minimum thresholds.
The objects covered is cbQosREDClassCfgMinThreshold"
::= { cbQosREDClassCfgEntry 11 }
-- end of cbQosREDClassCfg Group
--
--
-- Start of cbQosPoliceCfg Group
cbQosPoliceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action configuration
information."
::= { cbQosPoliceCfg 1 }
cbQosPoliceCfgEntry OBJECT-TYPE
SYNTAX CbQosPoliceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a Police Action. The table holds Policy
configuration parameters, such as rate, burst size, and
actions based on traffic rates.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex."
INDEX { cbQosConfigIndex }
::= { cbQosPoliceCfgTable 1 }
CbQosPoliceCfgEntry ::= SEQUENCE {
cbQosPoliceCfgRate Unsigned32,
cbQosPoliceCfgBurstSize Unsigned32,
cbQosPoliceCfgExtBurstSize Unsigned32,
cbQosPoliceCfgConformAction PoliceAction,
cbQosPoliceCfgConformSetValue Unsigned32,
cbQosPoliceCfgExceedAction PoliceAction,
cbQosPoliceCfgExceedSetValue Unsigned32,
cbQosPoliceCfgViolateAction PoliceAction,
cbQosPoliceCfgViolateSetValue Unsigned32,
cbQosPoliceCfgPir Unsigned32,
cbQosPoliceCfgRate64 Unsigned64,
cbQosPoliceCfgRateType CbQosRateType,
cbQosPoliceCfgPercentRateValue Unsigned32,
cbQosPoliceCfgPercentPirValue Unsigned32,
cbQosPoliceCfgCellRate Unsigned32,
cbQosPoliceCfgCellPir Unsigned32,
cbQosPoliceCfgBurstCell Unsigned32,
cbQosPoliceCfgExtBurstCell Unsigned32,
cbQosPoliceCfgBurstTime Unsigned32,
cbQosPoliceCfgExtBurstTime Unsigned32,
cbQosPoliceCfgCdvt Unsigned32,
cbQosPoliceCfgConformColor DisplayString,
cbQosPoliceCfgExceedColor DisplayString,
cbQosPoliceCfgConditional TruthValue,
cbQosPoliceCfgBurstSize64 Unsigned64,
cbQosPoliceCfgExtBurstSize64 Unsigned64,
cbQosPoliceCfgPir64 Unsigned64
}
cbQosPoliceCfgRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate. This is the sustained
rate permitted by policing.
If a committed policing rate greater than 4294967295
is configurable on the system, then the configured
rate is available in cbQosPoliceCfgRate64."
::= { cbQosPoliceCfgEntry 1 }
cbQosPoliceCfgBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (1000..512000000)
UNITS "Octets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of traffic, in bytes, in excess of the
committed policing rate that will be permitted by
the policing feature.
cbQosPoliceCfgBurstSize object is superseded by
cbQosPoliceCfgBurstSize64."
::= { cbQosPoliceCfgEntry 2 }
cbQosPoliceCfgExtBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (1000..512000000)
UNITS "Octets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of traffic, in bytes, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases.
cbQosPoliceCfgExtBurstSize object is superseded by
cbQosPoliceCfgExtBurstSize64."
::= { cbQosPoliceCfgEntry 3 }
cbQosPoliceCfgConformAction OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Action to be taken when the traffic is within the
configured rate, that is, the traffic rate is
conforming.
cbQosPoliceCfgConformAction object is superseded by
cbQosPoliceActionCfgConform."
::= { cbQosPoliceCfgEntry 4 }
cbQosPoliceCfgConformSetValue OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"New packet attribute values for each packets that
conforms to the configured Police rate.
cbQosPoliceCfgConformSetValue object is superseded by
cbQosPoliceActionCfgConformSetValue."
::= { cbQosPoliceCfgEntry 5 }
cbQosPoliceCfgExceedAction OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Action to be taken when the traffic exceeds the
configured rate, that is, the traffic is
non-conforming.
cbQosPoliceCfgExceedAction object is superseded by
cbQosPoliceActionCfgExceed."
::= { cbQosPoliceCfgEntry 6 }
cbQosPoliceCfgExceedSetValue OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"New packet attribute values for each packets that
conforms to the configured Police rate.
cbQosPoliceCfgExceedSetValue object is superseded by
cbQosPoliceActionCfgExceedSetValue."
::= { cbQosPoliceCfgEntry 7 }
cbQosPoliceCfgViolateAction OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets.
cbQosPoliceCfgViolateAction object is superseded by
cbQosPoliceActionCfgViolate."
::= { cbQosPoliceCfgEntry 8 }
cbQosPoliceCfgViolateSetValue OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"New packet attribute values for each packets that
conforms to the Police violate action. The packet
attibute values depend on the action that is taken
for the particular packet. For example, if the
action was to set the dscp value, this entry describes
the value it is set to.
cbQosPoliceCfgViolateSetValue object is superseded by
cbQosPoliceActionCfgViolateSetValue."
::= { cbQosPoliceCfgEntry 9 }
cbQosPoliceCfgPir OBJECT-TYPE
SYNTAX Unsigned32 (8000..2000000000)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The committed policing rate. This is the peak
rate permitted by two rate policing.
cbQosPoliceCfgPir object is superseded by cbQosPoliceCfgPir64."
::= { cbQosPoliceCfgEntry 10 }
cbQosPoliceCfgRate64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate. This is the sustained
rate permitted by policing."
::= { cbQosPoliceCfgEntry 11 }
cbQosPoliceCfgRateType OBJECT-TYPE
SYNTAX CbQosRateType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate type that configured for CIR & PIR.
1 means rates are configured in bps.
2 means rates are configured in percentage.
3 means rates are configured in cps.
4 means rates are configured in parts per-thousand.
5 means rates are configured in parts per-million."
::= { cbQosPoliceCfgEntry 12 }
cbQosPoliceCfgPercentRateValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "% of Interface Bandwidth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate in percentage. Its value
is valid only when cbQosPoliceCfgRateType equals to 2."
::= { cbQosPoliceCfgEntry 13 }
cbQosPoliceCfgPercentPirValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "% of Interface Bandwidth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peak policing rate in percentage. Its value is
valid only when cbQosPoliceCfgRateType equals to 2."
::= { cbQosPoliceCfgEntry 14 }
cbQosPoliceCfgCellRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "cells/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate in cells/second. Its value
is valid only when cbQosPoliceCfgRateType equals to 3."
::= { cbQosPoliceCfgEntry 15 }
cbQosPoliceCfgCellPir OBJECT-TYPE
SYNTAX Unsigned32
UNITS "cells/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peak policing rate in cells/second. Its value is
valid only when cbQosPoliceCfgRateType equals to 3."
::= { cbQosPoliceCfgEntry 16 }
cbQosPoliceCfgBurstCell OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "Cells"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in cells, in excess of the
committed policing rate that will be permitted by
the policing feature."
::= { cbQosPoliceCfgEntry 17 }
cbQosPoliceCfgExtBurstCell OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "Cells"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in cells, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases."
::= { cbQosPoliceCfgEntry 18 }
cbQosPoliceCfgBurstTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic time, in ms, in excess of the
committed policing rate that will be permitted by
the policing feature. The milli-second value is
internally converted to bytes by using the bandwidth
that is available for the class."
::= { cbQosPoliceCfgEntry 19 }
cbQosPoliceCfgExtBurstTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic time, in ms, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases. The milli-second value is
internally converted to bytes by using the bandwidth
that is available for the class."
::= { cbQosPoliceCfgEntry 20 }
cbQosPoliceCfgCdvt OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "micro-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM Cell Delay Variation Tolerance value."
::= { cbQosPoliceCfgEntry 21 }
cbQosPoliceCfgConformColor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Classmap name used in AF color-aware mode to
specify the conform-color for the incoming packets
which was marked by the previous node.
At least conform-color must be specified. If only
conform-color is specified, all other packets are
assumed to be marked exceed.
See RFC 2697, A Single Rate Three Color Marker.
See RFC 2698, A Two Rate Three Color Marker."
::= { cbQosPoliceCfgEntry 22 }
cbQosPoliceCfgExceedColor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Classmap name used in AF color-aware mode to
specify the exceed-color for the incoming packets
which was marked by the previous node.
If both conform-color and exceed-color are specified,
all other packets are assumed to be marked violate.
Violate-color configuration is not needed."
::= { cbQosPoliceCfgEntry 23 }
cbQosPoliceCfgConditional OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is use to depict weather police is configured
as a conditioniler policer or not"
::= { cbQosPoliceCfgEntry 24 }
cbQosPoliceCfgBurstSize64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicated the amount of traffic, in bytes, in
excess of the committed policing rate that will be permitted by
the policing feature.
If a device implements cbQosPoliceCfgBurstSize64, then
it should not implement cbQosPoliceCfgBurstSize."
::= { cbQosPoliceCfgEntry 25 }
cbQosPoliceCfgExtBurstSize64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicated the amount of traffic, in bytes, in
excess of the burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases.
If a device implements cbQosPoliceCfgBurstSize64, then
it should not implement cbQosPoliceCfgBurstSize."
::= { cbQosPoliceCfgEntry 26 }
cbQosPoliceCfgPir64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the committed policing rate. This is the
peak rate permitted by two rate policing.
If a device implements cbQosPoliceCfgPir64, then
it should not implement cbQosPoliceCfgPir."
::= { cbQosPoliceCfgEntry 27 }
-- end of cbQosPoliceCfg Group
--
--
-- Start of cbQosPoliceActionCfg Group
cbQosPoliceActionCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceActionCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action configuration
information."
::= { cbQosPoliceActionCfg 1 }
cbQosPoliceActionCfgEntry OBJECT-TYPE
SYNTAX CbQosPoliceActionCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about Actions for one Police. The table holds Police
action specific configuration parameters.
This table is a sub-table for cbQosPoliceCfgTable. There is
a 1-to-1 association between one entry here and one entry in
cbQosPoliceCfgTable.
This table contains configuration information only,
no statistics associated with it.
This table has two indices. The first is cbQosConfigIndex
which is drived directly from cbQosPoliceCfgTable to keep the
1-to-1 mapping nature between two tables.
The second is cbQosPoliceActionCfgIndex used to reference
the actual actions configured. The maximum number of actions
supported is determined by the system, which is 5 currently."
INDEX {
cbQosConfigIndex,
cbQosPoliceActionCfgIndex
}
::= { cbQosPoliceActionCfgTable 1 }
CbQosPoliceActionCfgEntry ::= SEQUENCE {
cbQosPoliceActionCfgIndex Unsigned32,
cbQosPoliceActionCfgConform PoliceAction,
cbQosPoliceActionCfgConformSetValue Unsigned32,
cbQosPoliceActionCfgExceed PoliceAction,
cbQosPoliceActionCfgExceedSetValue Unsigned32,
cbQosPoliceActionCfgViolate PoliceAction,
cbQosPoliceActionCfgViolateSetValue Unsigned32
}
cbQosPoliceActionCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for police
actions that are defined by a police configuration."
::= { cbQosPoliceActionCfgEntry 1 }
cbQosPoliceActionCfgConform OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets."
::= { cbQosPoliceActionCfgEntry 2 }
cbQosPoliceActionCfgConformSetValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgConform.
This object will be set to zero if the corresponding
police action does not require a set value, such as
no action, drop action or transmit action."
::= { cbQosPoliceActionCfgEntry 3 }
cbQosPoliceActionCfgExceed OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets."
::= { cbQosPoliceActionCfgEntry 4 }
cbQosPoliceActionCfgExceedSetValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgExceed.
This object will be set to zero if the corresponding
police action does not require a set value, such as
no action, drop action or transmit action."
::= { cbQosPoliceActionCfgEntry 5 }
cbQosPoliceActionCfgViolate OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets."
::= { cbQosPoliceActionCfgEntry 6 }
cbQosPoliceActionCfgViolateSetValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgViolate.
This object will be set to zero if the corresponding
police action does not require a set value, such as
no action, drop action or transmit action."
::= { cbQosPoliceActionCfgEntry 7 }
-- end of cbQosPoliceActionCfg Group
--
--
-- The cbQosTSCfg group
--
-- cbQosTSCfgTable
cbQosTSCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTSCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies traffic-shaping Action configuration
information."
::= { cbQosTSCfg 1 }
cbQosTSCfgEntry OBJECT-TYPE
SYNTAX CbQosTSCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a traffic-shaping Action. The table holds Traffic
Shaping configuration parameters, such as rate, burst size,
and Shaping types.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex."
INDEX { cbQosConfigIndex }
::= { cbQosTSCfgTable 1 }
CbQosTSCfgEntry ::= SEQUENCE {
cbQosTSCfgRate Integer32,
cbQosTSCfgBurstSize Integer32,
cbQosTSCfgExtBurstSize Integer32,
cbQosTSCfgAdaptiveEnabled TruthValue,
cbQosTSCfgAdaptiveRate Integer32,
cbQosTSCfgLimitType TrafficShapingLimit,
cbQosTSCfgRateType CbQosRateType,
cbQosTSCfgPercentRateValue Unsigned32,
cbQosTSCfgBurstTime Unsigned32,
cbQosTSCfgExtBurstTime Unsigned32,
cbQosTSCfgRate64 Unsigned64,
cbQosTSCfgBurstSize64 Unsigned64,
cbQosTSCfgExtBurstSize64 Unsigned64
}
cbQosTSCfgRate OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed traffic-shaping rate. This is the
sustained rate permitted by the traffic-shaping."
::= { cbQosTSCfgEntry 1 }
cbQosTSCfgBurstSize OBJECT-TYPE
SYNTAX Integer32 (256..154400000)
UNITS "bits"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of traffic, in bits, in excess of the
committed traffic-shaping rate that will be
instantaneously permitted by this feature.
cbQosTSCfgBurstSize object is superseded by cbQosTSCfgBurstSize64."
::= { cbQosTSCfgEntry 2 }
cbQosTSCfgExtBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..154400000)
UNITS "bits"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of traffic, in bits, in excess of the
burst limit, which may be conditionally permitted
by traffic-shaping feature.
cbQosTSCfgExtBurstSize object is superseded by
cbQosTSCfgExtBurstSize64."
::= { cbQosTSCfgEntry 3 }
cbQosTSCfgAdaptiveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates is adaptive traffic-shaping
has been enabled."
::= { cbQosTSCfgEntry 4 }
cbQosTSCfgAdaptiveRate OBJECT-TYPE
SYNTAX Integer32 (8000..154400000)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current adaptive traffic
shaping rate."
::= { cbQosTSCfgEntry 5 }
cbQosTSCfgLimitType OBJECT-TYPE
SYNTAX TrafficShapingLimit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if traffic-shaping is limiting
traffic based on the peak rate or the average rate."
::= { cbQosTSCfgEntry 6 }
cbQosTSCfgRateType OBJECT-TYPE
SYNTAX CbQosRateType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate type that configured for traffic-shaping.
1 means rate is configured in bps.
2 means rate is configured in percentage.
4 means rates are configured in parts per-thousand.
5 means rates are configured in parts per-million."
::= { cbQosTSCfgEntry 7 }
cbQosTSCfgPercentRateValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "% of Interface Bandwidth"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed traffic-shaping rate in percentage.
Its value is valid only when cbQosTSCfgRateType
equals to 2."
::= { cbQosTSCfgEntry 8 }
cbQosTSCfgBurstTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in ms, in excess of the
committed traffic-shaping rate that will be
instantaneously permitted by this feature.
The milli-second value is internally converted to
bits by using the bandwidth that is available for
the class."
::= { cbQosTSCfgEntry 9 }
cbQosTSCfgExtBurstTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "milli-seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in ms, in excess of the
burst limit, which may be conditionnally permitted
by traffic-shaping feature.
The milli-second value is internally converted to
bits by using the bandwidth that is available for
the class."
::= { cbQosTSCfgEntry 10 }
cbQosTSCfgRate64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed shape rate. This is the sustained
rate permitted by shaping. This object represents
the 64 bit value of object cbQosTSCfgRate"
::= { cbQosTSCfgEntry 11 }
cbQosTSCfgBurstSize64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the the amount of traffic, in bits, in
excess of the committed traffic-shaping rate that will be
instantaneously permitted by this feature.
If a device implements cbQosTSCfgBurstSize64, then
it should not implement cbQosTSCfgBurstSize."
::= { cbQosTSCfgEntry 12 }
cbQosTSCfgExtBurstSize64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the amount of traffic, in bits, in excess
of the burst limit, which may be conditionally permitted
by traffic-shaping feature.
If a device implements cbQosTSCfgExtBurstSize64, then
it should not implement cbQosTSCfgExtBurstSize."
::= { cbQosTSCfgEntry 13 }
-- end of cbQosTSCfgTable
--
-- The cbQosSetCfgObject group
--
-- cbQosSetCfg
cbQosSetCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosSetCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Packet Marking Action configuration
information."
::= { cbQosSetCfg 1 }
cbQosSetCfgEntry OBJECT-TYPE
SYNTAX CbQosSetCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a Packet Marking Action. The table holds Packet
Marking configuration parameters, such as type of packet
marking and values being set to.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex."
INDEX { cbQosConfigIndex }
::= { cbQosSetCfgTable 1 }
CbQosSetCfgEntry ::= SEQUENCE {
cbQosSetCfgFeature SetFeatureType,
cbQosSetCfgIpDSCPValue Integer32,
cbQosSetCfgIpPrecedenceValue Integer32,
cbQosSetCfgQosGroupValue Integer32,
cbQosSetCfgL2CosValue Integer32,
cbQosSetCfgMplsExpValue Unsigned32,
cbQosSetCfgDiscardClassValue Unsigned32,
cbQosSetCfgMplsExpTopMostValue Unsigned32,
cbQosSetCfgSrpPriority Unsigned32,
cbQosSetCfgFrFecnBecn Unsigned32,
cbQosSetCfgL2CosInnerValue Integer32,
cbQosSetCfgFrDe TruthValue,
cbQosSetCfgIpPrecedenceTunnelValue Unsigned32,
cbQosSetCfgIpDSCPTunnelValue Unsigned32,
cbQosSetCfgDei TruthValue,
cbQosSetCfgDeiImposition TruthValue
}
cbQosSetCfgFeature OBJECT-TYPE
SYNTAX SetFeatureType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit-wise position of each packet marking feature."
::= { cbQosSetCfgEntry 1 }
cbQosSetCfgIpDSCPValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP DSCP value at which the packet is being set
by the packet marking feature."
::= { cbQosSetCfgEntry 2 }
cbQosSetCfgIpPrecedenceValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP precedence value at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 3 }
cbQosSetCfgQosGroupValue OBJECT-TYPE
SYNTAX Integer32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS Group number at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 4 }
cbQosSetCfgL2CosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Layer 2 Cos value at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 5 }
cbQosSetCfgMplsExpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MPLS experimental value at which the packet
is being set by the packet marking feature."
::= { cbQosSetCfgEntry 6 }
cbQosSetCfgDiscardClassValue OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Discard Class value at which the packet
is being set by the packet marking feature."
::= { cbQosSetCfgEntry 7 }
cbQosSetCfgMplsExpTopMostValue OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MPLS experimental value on the topmost label
at which the packet is being set by the packet marking
feature."
::= { cbQosSetCfgEntry 8 }
cbQosSetCfgSrpPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SRP Priority value at which the packet is being set
by the packet marking feature. The higher the value the
higher the priority. SRP is a Cisco developed protocol.
RFC 2892: The Cisco SRP MAC Layer Protocol."
::= { cbQosSetCfgEntry 9 }
cbQosSetCfgFrFecnBecn OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a configurable parameter in percentage of the
queue size. When the current queue size out of the
queue limit is greater than this parameter, both
Frame Relay FECN and BECN bits will be set for
Frame Relay congestion notification mechanism."
::= { cbQosSetCfgEntry 10 }
cbQosSetCfgL2CosInnerValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be set in the 802.1p priority field in the inner
802.1q VLAN tag (QinQ). This object is applicable when
cbQosSetCfgFeature has the 'l2CosInner' bit set."
::= { cbQosSetCfgEntry 11 }
cbQosSetCfgFrDe OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Discard Eligibility (DE) bit is used to indicate that a
frame has lower importance than other frames. The DE bit is part
of the Address field in the Frame Relay frame header.
DTE devices can set the value of the DE bit of a frame to 1
to indicate that the frame has lower importance than other
frames. When the network becomes congested, DCE devices will
discard frames with the DE bit set before discarding those that
do not. This reduces the likelihood of critical data being
dropped by Frame Relay DCE devices during periods of
congestion."
DEFVAL { false }
::= { cbQosSetCfgEntry 12 }
cbQosSetCfgIpPrecedenceTunnelValue OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP precedence value at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 13 }
cbQosSetCfgIpDSCPTunnelValue OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP DSCP value at which the packet is being set
by the packet marking feature."
::= { cbQosSetCfgEntry 14 }
cbQosSetCfgDei OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the DEI bit is set in the topmost 802.1ad
header."
::= { cbQosSetCfgEntry 15 }
cbQosSetCfgDeiImposition OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the DEI bit is set in the imposed 802.1ad
header."
::= { cbQosSetCfgEntry 16 }
-- end of cbQosSetCfgTable
cbQosCMStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosCMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ClassMap related Statistical
information."
::= { cbQosClassMapStats 1 }
cbQosCMStatsEntry OBJECT-TYPE
SYNTAX CbQosCMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about ClassMap. ClassMap specific information
you can find in this table are : pre/post policy pkt/byte
counts, bit rates, drop pkt/bytes and no buffer drops.
This table contains statistical information only,
no configuration information associated with it. Therefore,
it is indexed by the instance specific IDs, such as
cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosCMStatsTable 1 }
CbQosCMStatsEntry ::= SEQUENCE {
cbQosCMPrePolicyPktOverflow Counter32,
cbQosCMPrePolicyPkt Counter32,
cbQosCMPrePolicyPkt64 Counter64,
cbQosCMPrePolicyByteOverflow Counter32,
cbQosCMPrePolicyByte Counter32,
cbQosCMPrePolicyByte64 Counter64,
cbQosCMPrePolicyBitRate Gauge32,
cbQosCMPostPolicyByteOverflow Counter32,
cbQosCMPostPolicyByte Counter32,
cbQosCMPostPolicyByte64 Counter64,
cbQosCMPostPolicyBitRate Gauge32,
cbQosCMDropPktOverflow Counter32,
cbQosCMDropPkt Counter32,
cbQosCMDropPkt64 Counter64,
cbQosCMDropByteOverflow Counter32,
cbQosCMDropByte Counter32,
cbQosCMDropByte64 Counter64,
cbQosCMDropBitRate Gauge32,
cbQosCMNoBufDropPktOverflow Counter32,
cbQosCMNoBufDropPkt Counter32,
cbQosCMNoBufDropPkt64 Counter64,
cbQosCMFragmentPktOverflow Counter32,
cbQosCMFragmentPkt Counter32,
cbQosCMFragmentPkt64 Counter64,
cbQosCMFragmentByteOverflow Counter32,
cbQosCMFragmentByte Counter32,
cbQosCMFragmentByte64 Counter64,
cbQosCMPrePolicyBitRate64 CounterBasedGauge64,
cbQosCMPostPolicyBitRate64 CounterBasedGauge64,
cbQosCMDropBitRate64 CounterBasedGauge64
}
cbQosCMPrePolicyPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 1 }
cbQosCMPrePolicyPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 2 }
cbQosCMPrePolicyPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound packets prior to executing
any QoS policies."
::= { cbQosCMStatsEntry 3 }
cbQosCMPrePolicyByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 4 }
cbQosCMPrePolicyByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 5 }
cbQosCMPrePolicyByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound octets prior to executing
any QoS policies."
::= { cbQosCMStatsEntry 6 }
cbQosCMPrePolicyBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic prior to executing any QoS
policies."
::= { cbQosCMStatsEntry 7 }
cbQosCMPostPolicyByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound octets after executing
QoS policies."
::= { cbQosCMStatsEntry 8 }
cbQosCMPostPolicyByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound octets after executing
QoS policies."
::= { cbQosCMStatsEntry 9 }
cbQosCMPostPolicyByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound octets after executing
QoS policies."
::= { cbQosCMStatsEntry 10 }
cbQosCMPostPolicyBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic after executing QoS
policies."
::= { cbQosCMStatsEntry 11 }
cbQosCMDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits counter of dropped pkts per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 12 }
cbQosCMDropPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits counter of dropped pkts per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 13 }
cbQosCMDropPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits counter of dropped pkts per class as
the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 14 }
cbQosCMDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits counter of dropped bytes per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 15 }
cbQosCMDropByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits counter of dropped bytes per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 16 }
cbQosCMDropByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits counter of dropped bytes per class as the
result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 17 }
cbQosCMDropBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the drops per class as the result of
all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 18 }
cbQosCMNoBufDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits drop packet count which occured
due to a lack of SRAM buffers during output processing
on an interface."
::= { cbQosCMStatsEntry 19 }
cbQosCMNoBufDropPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits drop packet count which occured due
to a lack of SRAM buffers during output processing on
an interface."
::= { cbQosCMStatsEntry 20 }
cbQosCMNoBufDropPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits drop packet count which occured due to a
lack of SRAM buffers during output processing on an
interface."
::= { cbQosCMStatsEntry 21 }
cbQosCMFragmentPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits counter for aggregate fragment pkts"
::= { cbQosCMStatsEntry 22 }
cbQosCMFragmentPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits counter for aggregate fragment pkts"
::= { cbQosCMStatsEntry 23 }
cbQosCMFragmentPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits counter for aggregate fragment pkts"
::= { cbQosCMStatsEntry 24 }
cbQosCMFragmentByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits counter for aggregate fragment bytes"
::= { cbQosCMStatsEntry 25 }
cbQosCMFragmentByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits counter for aggregate fragment bytes"
::= { cbQosCMStatsEntry 26 }
cbQosCMFragmentByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits counter for aggregate fragment bytes"
::= { cbQosCMStatsEntry 27 }
cbQosCMPrePolicyBitRate64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic prior to executing any QoS
policies.This object is a 64-bit version of
cbQosCMPrePolicyBitRate."
::= { cbQosCMStatsEntry 28 }
cbQosCMPostPolicyBitRate64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic after executing QoS
policies. This object is a 64-bit version of
cbQosCMPostPolicyBitRate."
::= { cbQosCMStatsEntry 29 }
cbQosCMDropBitRate64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the drops per class as the result of
all features that can produce drops
(e.g., police, random detect, etc.). This object is a
64-bit version of cbQosCMDropBitRate."
::= { cbQosCMStatsEntry 30 }
-- End of cbQosCMStats group
--
--
-- QoS Match Statement Object Stats Table
cbQosMatchStmtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosMatchStmtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Match Statement related statistical
information."
::= { cbQosMatchStmtStats 1 }
cbQosMatchStmtStatsEntry OBJECT-TYPE
SYNTAX CbQosMatchStmtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about Match Statement. Match Statement specific
information you can find in this table are :
Pre policy pkt/byte counters, and bit rates.
This table contains statistical information only,
no configuration information associated with it. Therefore,
it is indexed by the instance specific IDs, such as
cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosMatchStmtStatsTable 1 }
CbQosMatchStmtStatsEntry ::= SEQUENCE {
cbQosMatchPrePolicyPktOverflow Counter32,
cbQosMatchPrePolicyPkt Counter32,
cbQosMatchPrePolicyPkt64 Counter64,
cbQosMatchPrePolicyByteOverflow Counter32,
cbQosMatchPrePolicyByte Counter32,
cbQosMatchPrePolicyByte64 Counter64,
cbQosMatchPrePolicyBitRate Gauge32
}
cbQosMatchPrePolicyPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 1 }
cbQosMatchPrePolicyPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 2 }
cbQosMatchPrePolicyPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound packets prior to executing
any QoS policies."
::= { cbQosMatchStmtStatsEntry 3 }
cbQosMatchPrePolicyByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 4 }
cbQosMatchPrePolicyByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 5 }
cbQosMatchPrePolicyByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound octets prior to executing
any QoS policies."
::= { cbQosMatchStmtStatsEntry 6 }
cbQosMatchPrePolicyBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic prior to executing any QoS
policies."
::= { cbQosMatchStmtStatsEntry 7 }
-- The cbQosPoliceStats group
--
-- cbQosPoliceStatsTable
cbQosPoliceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action related Statistical
information."
::= { cbQosPoliceStats 1 }
cbQosPoliceStatsEntry OBJECT-TYPE
SYNTAX CbQosPoliceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about Police Action. Police Action specific
information you can find in this table are :
Conformed/Exceeded pkt/byte counters, bit rates.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosPoliceStatsTable 1 }
CbQosPoliceStatsEntry ::= SEQUENCE {
cbQosPoliceConformedPktOverflow Counter32,
cbQosPoliceConformedPkt Counter32,
cbQosPoliceConformedPkt64 Counter64,
cbQosPoliceConformedByteOverflow Counter32,
cbQosPoliceConformedByte Counter32,
cbQosPoliceConformedByte64 Counter64,
cbQosPoliceConformedBitRate Gauge32,
cbQosPoliceExceededPktOverflow Counter32,
cbQosPoliceExceededPkt Counter32,
cbQosPoliceExceededPkt64 Counter64,
cbQosPoliceExceededByteOverflow Counter32,
cbQosPoliceExceededByte Counter32,
cbQosPoliceExceededByte64 Counter64,
cbQosPoliceExceededBitRate Gauge32,
cbQosPoliceViolatedPktOverflow Counter32,
cbQosPoliceViolatedPkt Counter32,
cbQosPoliceViolatedPkt64 Counter64,
cbQosPoliceViolatedByteOverflow Counter32,
cbQosPoliceViolatedByte Counter32,
cbQosPoliceViolatedByte64 Counter64,
cbQosPoliceViolatedBitRate Gauge32,
cbQosPoliceConformedBitRate64 CounterBasedGauge64,
cbQosPoliceExceededBitRate64 CounterBasedGauge64,
cbQosPoliceViolatedBitRate64 CounterBasedGauge64
}
cbQosPoliceConformedPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 1 }
cbQosPoliceConformedPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 2 }
cbQosPoliceConformedPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets treated as conforming
by the policing feature."
::= { cbQosPoliceStatsEntry 3 }
cbQosPoliceConformedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 4 }
cbQosPoliceConformedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 5 }
cbQosPoliceConformedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets treated as conforming
by the policing feature."
::= { cbQosPoliceStatsEntry 6 }
cbQosPoliceConformedBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of conforming traffic."
::= { cbQosPoliceStatsEntry 7 }
cbQosPoliceExceededPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 8 }
cbQosPoliceExceededPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bits count of packets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 9 }
cbQosPoliceExceededPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 10 }
cbQosPoliceExceededByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 11 }
cbQosPoliceExceededByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 12 }
cbQosPoliceExceededByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 13 }
cbQosPoliceExceededBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the non-conforming traffic."
::= { cbQosPoliceStatsEntry 14 }
cbQosPoliceViolatedPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 15 }
cbQosPoliceViolatedPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bits count of packets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 16 }
cbQosPoliceViolatedPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 17 }
cbQosPoliceViolatedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 18 }
cbQosPoliceViolatedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 19 }
cbQosPoliceViolatedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 20 }
cbQosPoliceViolatedBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the violating traffic."
::= { cbQosPoliceStatsEntry 21 }
cbQosPoliceConformedBitRate64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of conforming traffic.
This object is a 64-bit version of
cbQosPoliceConformedBitRate."
::= { cbQosPoliceStatsEntry 22 }
cbQosPoliceExceededBitRate64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of non-conforming traffic.
This object is a 64-bit version of
cbQosPoliceExceededBitRate."
::= { cbQosPoliceStatsEntry 23 }
cbQosPoliceViolatedBitRate64 OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the violating traffic.
This object is a 64-bit version of
cbQosPoliceViolatedBitRate."
::= { cbQosPoliceStatsEntry 24 }
-- end of cbQosPoliceStatsTable
--
--
-- The cbQosQueueingStats group
cbQosQueueingStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosQueueingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Queueing Action related Statistical
information."
::= { cbQosQueueingStats 1 }
cbQosQueueingStatsEntry OBJECT-TYPE
SYNTAX CbQosQueueingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about queueing action. Queueing action specific
information you can find in this table are :
various Q depth, and discard pkt/byte counters.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosQueueingStatsTable 1 }
CbQosQueueingStatsEntry ::= SEQUENCE {
cbQosQueueingCurrentQDepth Gauge32,
cbQosQueueingMaxQDepth Gauge32,
cbQosQueueingDiscardByteOverflow Counter32,
cbQosQueueingDiscardByte Counter32,
cbQosQueueingDiscardByte64 Counter64,
cbQosQueueingDiscardPktOverflow Counter32,
cbQosQueueingDiscardPkt Counter32,
cbQosQueueingDiscardPkt64 Counter64,
cbQosQueueingCurrentQDepthPkt Gauge32,
cbQosQueueingMaxQDepthPkt Gauge32,
cbQosQueueingTransmitByte64 Counter64,
cbQosQueueingTransmitPkt64 Counter64
}
cbQosQueueingCurrentQDepth OBJECT-TYPE
SYNTAX Gauge32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current depth of the queue."
::= { cbQosQueueingStatsEntry 1 }
cbQosQueueingMaxQDepth OBJECT-TYPE
SYNTAX Gauge32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum depth of the queue."
::= { cbQosQueueingStatsEntry 2 }
cbQosQueueingDiscardByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bit count of octets, associated with
this class, that were dropped by queueing."
::= { cbQosQueueingStatsEntry 3 }
cbQosQueueingDiscardByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets, associated with
this class, that were dropped by queueing."
::= { cbQosQueueingStatsEntry 4 }
cbQosQueueingDiscardByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of octets, associated with this class,
that were dropped by queueing."
::= { cbQosQueueingStatsEntry 5 }
cbQosQueueingDiscardPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets, associated with
this class, that were dropped by queueing."
::= { cbQosQueueingStatsEntry 6 }
cbQosQueueingDiscardPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, associated with this class,
that were dropped by queueing."
::= { cbQosQueueingStatsEntry 7 }
cbQosQueueingDiscardPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, associated with this class,
that were dropped by queueing."
::= { cbQosQueueingStatsEntry 8 }
cbQosQueueingCurrentQDepthPkt OBJECT-TYPE
SYNTAX Gauge32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of packets
sitting in the queue"
::= { cbQosQueueingStatsEntry 9 }
cbQosQueueingMaxQDepthPkt OBJECT-TYPE
SYNTAX Gauge32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum depth of the queue in packets."
::= { cbQosQueueingStatsEntry 10 }
cbQosQueueingTransmitByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of octets, associated with this class,
that were transmitted by queueing."
::= { cbQosQueueingStatsEntry 11 }
cbQosQueueingTransmitPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, associated with this class,
that were transmitted by queueing."
::= { cbQosQueueingStatsEntry 12 }
-- end of cbQosQueueingStats Group
--
-- cbQosTSStats Group
cbQosTSStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTSStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies traffic-shaping Action related
Statistical information."
::= { cbQosTSStats 1 }
cbQosTSStatsEntry OBJECT-TYPE
SYNTAX CbQosTSStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about traffic-shaping Action. Traffic-shaping
Action specific information you can find in this table are :
various delay/drop pkt/byte counters, state of feature,
and Q size.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosTSStatsTable 1 }
CbQosTSStatsEntry ::= SEQUENCE {
cbQosTSStatsDelayedByteOverflow Counter32,
cbQosTSStatsDelayedByte Counter32,
cbQosTSStatsDelayedByte64 Counter64,
cbQosTSStatsDelayedPktOverflow Counter32,
cbQosTSStatsDelayedPkt Counter32,
cbQosTSStatsDelayedPkt64 Counter64,
cbQosTSStatsDropByteOverflow Counter32,
cbQosTSStatsDropByte Counter32,
cbQosTSStatsDropByte64 Counter64,
cbQosTSStatsDropPktOverflow Counter32,
cbQosTSStatsDropPkt Counter32,
cbQosTSStatsDropPkt64 Counter64,
cbQosTSStatsActive TruthValue,
cbQosTSStatsCurrentQSize Gauge32
}
cbQosTSStatsDelayedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
octets that have been delayed."
::= { cbQosTSStatsEntry 1 }
cbQosTSStatsDelayedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
octets that have been delayed."
::= { cbQosTSStatsEntry 2 }
cbQosTSStatsDelayedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
octets that have been delayed."
::= { cbQosTSStatsEntry 3 }
cbQosTSStatsDelayedPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
packets that have been delayed."
::= { cbQosTSStatsEntry 4 }
cbQosTSStatsDelayedPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
packets that have been delayed."
::= { cbQosTSStatsEntry 5 }
cbQosTSStatsDelayedPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
packets that have been delayed."
::= { cbQosTSStatsEntry 6 }
cbQosTSStatsDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
octets that have been dropped during shaping."
::= { cbQosTSStatsEntry 7 }
cbQosTSStatsDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
octets that have been dropped during shaping."
::= { cbQosTSStatsEntry 8 }
cbQosTSStatsDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
octets that have been dropped during shaping."
::= { cbQosTSStatsEntry 9 }
cbQosTSStatsDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
packets that have been dropped during shaping."
::= { cbQosTSStatsEntry 10 }
cbQosTSStatsDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
packets that have been dropped during shaping."
::= { cbQosTSStatsEntry 11 }
cbQosTSStatsDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
packets that have been dropped during shaping."
::= { cbQosTSStatsEntry 12 }
cbQosTSStatsActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current traffic-shaping
state. When traffic-shaping is enabled and the traffic
rate exceeds the shape rate, traffic-shaping
is considered to be active. Otherwise, it is
considered inactive."
::= { cbQosTSStatsEntry 13 }
cbQosTSStatsCurrentQSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current traffic-shaping
queue depth in packets."
::= { cbQosTSStatsEntry 14 }
-- end of cbQosTSStats Group
--
-- cbQosREDClassStats Group
cbQosREDClassStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosREDClassStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per Precedence WRED Action related
Statistical information."
::= { cbQosREDClassStats 1 }
cbQosREDClassStatsEntry OBJECT-TYPE
SYNTAX CbQosREDClassStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about per Precedence WRED Action. per Precedence
WRED Action specific information you can find in this table
are : Random pkt/byte counters, and Tail drop pkt/byte
counters.
This table contains per Precedence/dscp based statistical
information only, no configuration information associated
with it. Therefore, it is indexed by the instance specific
IDs, and a per Precedence identifier:
cbQosPolicyIndex, cbQosObjectsIndex and cbQosREDValue."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex,
cbQosREDValue
}
::= { cbQosREDClassStatsTable 1 }
CbQosREDClassStatsEntry ::= SEQUENCE {
cbQosREDRandomDropPktOverflow Counter32,
cbQosREDRandomDropPkt Counter32,
cbQosREDRandomDropPkt64 Counter64,
cbQosREDRandomDropByteOverflow Counter32,
cbQosREDRandomDropByte Counter32,
cbQosREDRandomDropByte64 Counter64,
cbQosREDTailDropPktOverflow Counter32,
cbQosREDTailDropPkt Counter32,
cbQosREDTailDropPkt64 Counter64,
cbQosREDTailDropByteOverflow Counter32,
cbQosREDTailDropByte Counter32,
cbQosREDTailDropByte64 Counter64,
cbQosREDTransmitPktOverflow Counter32,
cbQosREDTransmitPkt Counter32,
cbQosREDTransmitPkt64 Counter64,
cbQosREDTransmitByteOverflow Counter32,
cbQosREDTransmitByte Counter32,
cbQosREDTransmitByte64 Counter64,
cbQosREDECNMarkPktOverflow Counter32,
cbQosREDECNMarkPkt Counter32,
cbQosREDECNMarkPkt64 Counter64,
cbQosREDECNMarkByteOverflow Counter32,
cbQosREDECNMarkByte Counter32,
cbQosREDECNMarkByte64 Counter64,
cbQosREDMeanQSizeUnits CbQosQueueUnitType,
cbQosREDMeanQSize CbQosQueueDepth
}
cbQosREDRandomDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 1 }
cbQosREDRandomDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 2 }
cbQosREDRandomDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 3 }
cbQosREDRandomDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 4 }
cbQosREDRandomDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 5 }
cbQosREDRandomDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 6 }
cbQosREDTailDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 7 }
cbQosREDTailDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 8 }
cbQosREDTailDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 9 }
cbQosREDTailDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 10 }
cbQosREDTailDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 11 }
cbQosREDTailDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 12 }
cbQosREDTransmitPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes transmitted."
::= { cbQosREDClassStatsEntry 13 }
cbQosREDTransmitPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes trasmitted."
::= { cbQosREDClassStatsEntry 14 }
cbQosREDTransmitPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets transmitted."
::= { cbQosREDClassStatsEntry 15 }
cbQosREDTransmitByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets transmitted."
::= { cbQosREDClassStatsEntry 16 }
cbQosREDTransmitByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets trasmitted."
::= { cbQosREDClassStatsEntry 17 }
cbQosREDTransmitByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets transmitted."
::= { cbQosREDClassStatsEntry 18 }
cbQosREDECNMarkPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets ecn marked when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 19 }
cbQosREDECNMarkPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 20 }
cbQosREDECNMarkPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets ecn marked when the
number of packets in the associated queue was
greater than the minimum threshold and less than
the maximum threshold."
::= { cbQosREDClassStatsEntry 21 }
cbQosREDECNMarkByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 22 }
cbQosREDECNMarkByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 23 }
cbQosREDECNMarkByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes ecn marked when the
number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 24 }
cbQosREDMeanQSizeUnits OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type of cbQosREDMeanQSize
object."
::= { cbQosREDClassStatsEntry 25 }
cbQosREDMeanQSize OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average queue size computed and used by the
WRED algorithm."
::= { cbQosREDClassStatsEntry 26 }
-- end of cbQosREDClassStatsTable
--
-- Start of cbQosIPHCCfgTable
cbQosIPHCCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosIPHCCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies IP Header Compression
configuration information."
::= { cbQosIPHCCfg 1 }
cbQosIPHCCfgEntry OBJECT-TYPE
SYNTAX CbQosIPHCCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about IP Header compression. This
includes the compression option of UDP/RTP header,
TCP header or both.
This table contains configuration information only,
no statistics associated with it. Therefore, it is
indexed by cbQosConfigIndex."
INDEX { cbQosConfigIndex }
::= { cbQosIPHCCfgTable 1 }
CbQosIPHCCfgEntry ::= SEQUENCE {
cbQosIPHCCfgOption IPHCOption,
cbQosIPHCCfgEnabled TruthValue
}
cbQosIPHCCfgOption OBJECT-TYPE
SYNTAX IPHCOption
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured IP header compression option.
The value is defined by IPHCOption."
::= { cbQosIPHCCfgEntry 1 }
cbQosIPHCCfgEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if IPHC is enabled for policy class."
::= { cbQosIPHCCfgEntry 2 }
-- end of cbQosIPHCCfgTable
--
-- Start of cbQosIPHCStatsTable
cbQosIPHCStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosIPHCStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies IP Header Compression
statistical information."
::= { cbQosIPHCStats 1 }
cbQosIPHCStatsEntry OBJECT-TYPE
SYNTAX CbQosIPHCStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes statistical
information about IP Header compression.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
namely cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosIPHCStatsTable 1 }
CbQosIPHCStatsEntry ::= SEQUENCE {
cbQosIPHCRtpSentPktOverflow Counter32,
cbQosIPHCRtpSentPkt Counter32,
cbQosIPHCRtpSentPkt64 Counter64,
cbQosIPHCRtpCmprsOutPktOverflow Counter32,
cbQosIPHCRtpCmprsOutPkt Counter32,
cbQosIPHCRtpCmprsOutPkt64 Counter64,
cbQosIPHCRtpSavedByteOverflow Counter32,
cbQosIPHCRtpSavedByte Counter32,
cbQosIPHCRtpSavedByte64 Counter64,
cbQosIPHCRtpSentByteOverflow Counter32,
cbQosIPHCRtpSentByte Counter32,
cbQosIPHCRtpSentByte64 Counter64,
cbQosIPHCRtpSentByteRate Gauge32,
cbQosIPHCTcpSentPktOverflow Counter32,
cbQosIPHCTcpSentPkt Counter32,
cbQosIPHCTcpSentPkt64 Counter64,
cbQosIPHCTcpCmprsOutPktOverflow Counter32,
cbQosIPHCTcpCmprsOutPkt Counter32,
cbQosIPHCTcpCmprsOutPkt64 Counter64,
cbQosIPHCTcpSavedByteOverflow Counter32,
cbQosIPHCTcpSavedByte Counter32,
cbQosIPHCTcpSavedByte64 Counter64,
cbQosIPHCTcpSentByteOverflow Counter32,
cbQosIPHCTcpSentByte Counter32,
cbQosIPHCTcpSentByte64 Counter64,
cbQosIPHCTcpSentByteRate Gauge32,
cbQosIPHCRtpFullHdrSentPktOverflow Counter64,
cbQosIPHCRtpFullHdrSentPkt Counter64,
cbQosIPHCRtpFullHdrSentPkt64 Counter64,
cbQosIPHCTcpFullHdrSentPktOverflow Counter64,
cbQosIPHCTcpFullHdrSentPkt Counter64,
cbQosIPHCTcpFullHdrSentPkt64 Counter64
}
cbQosIPHCRtpSentPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound UDP/RTP packets."
::= { cbQosIPHCStatsEntry 1 }
cbQosIPHCRtpSentPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound UDP/RTP packets."
::= { cbQosIPHCStatsEntry 2 }
cbQosIPHCRtpSentPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound UDP/RTP packets."
::= { cbQosIPHCStatsEntry 3 }
cbQosIPHCRtpCmprsOutPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound compressed
UDP/RTP packets."
::= { cbQosIPHCStatsEntry 4 }
cbQosIPHCRtpCmprsOutPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound compressed
UDP/RTP packets."
::= { cbQosIPHCStatsEntry 5 }
cbQosIPHCRtpCmprsOutPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound compressed
UDP/RTP packets."
::= { cbQosIPHCStatsEntry 6 }
cbQosIPHCRtpSavedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of UDP/RTP bytes that
saved due to IPHC."
::= { cbQosIPHCStatsEntry 7 }
cbQosIPHCRtpSavedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of UDP/RTP bytes that
saved due to IPHC."
::= { cbQosIPHCStatsEntry 8 }
cbQosIPHCRtpSavedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of UDP/RTP bytes that saved
due to IPHC."
::= { cbQosIPHCStatsEntry 9 }
cbQosIPHCRtpSentByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound UDP/RTP
bytes."
::= { cbQosIPHCStatsEntry 10 }
cbQosIPHCRtpSentByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound UDP/RTP
bytes."
::= { cbQosIPHCStatsEntry 11 }
cbQosIPHCRtpSentByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound UDP/RTP bytes."
::= { cbQosIPHCStatsEntry 12 }
cbQosIPHCRtpSentByteRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "Octets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bits count of outbound UDP/RTP byte rate."
::= { cbQosIPHCStatsEntry 13 }
cbQosIPHCTcpSentPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound TCP packets."
::= { cbQosIPHCStatsEntry 14 }
cbQosIPHCTcpSentPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound TCP packets."
::= { cbQosIPHCStatsEntry 15 }
cbQosIPHCTcpSentPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound TCP packets."
::= { cbQosIPHCStatsEntry 16 }
cbQosIPHCTcpCmprsOutPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound compressed
TCP packets."
::= { cbQosIPHCStatsEntry 17 }
cbQosIPHCTcpCmprsOutPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound compressed
TCP packets."
::= { cbQosIPHCStatsEntry 18 }
cbQosIPHCTcpCmprsOutPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound compressed TCP
packets."
::= { cbQosIPHCStatsEntry 19 }
cbQosIPHCTcpSavedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of TCP bytes that saved
due to IPHC."
::= { cbQosIPHCStatsEntry 20 }
cbQosIPHCTcpSavedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of TCP bytes that saved
due to IPHC."
::= { cbQosIPHCStatsEntry 21 }
cbQosIPHCTcpSavedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of TCP bytes that saved due
to IPHC."
::= { cbQosIPHCStatsEntry 22 }
cbQosIPHCTcpSentByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound TCP bytes."
::= { cbQosIPHCStatsEntry 23 }
cbQosIPHCTcpSentByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound TCP bytes."
::= { cbQosIPHCStatsEntry 24 }
cbQosIPHCTcpSentByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound TCP bytes."
::= { cbQosIPHCStatsEntry 25 }
cbQosIPHCTcpSentByteRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "Octets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bits count of outbound TCP byte rate."
::= { cbQosIPHCStatsEntry 26 }
cbQosIPHCRtpFullHdrSentPktOverflow OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of total full header UDP/RTP packets
sent out."
::= { cbQosIPHCStatsEntry 27 }
cbQosIPHCRtpFullHdrSentPkt OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of total full header UDP/RTP packets
sent out."
::= { cbQosIPHCStatsEntry 28 }
cbQosIPHCRtpFullHdrSentPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of total fullheader UDP/RTP packets sent
out."
::= { cbQosIPHCStatsEntry 29 }
cbQosIPHCTcpFullHdrSentPktOverflow OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of total fullheader TCP packets sent
out."
::= { cbQosIPHCStatsEntry 30 }
cbQosIPHCTcpFullHdrSentPkt OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of total fullheader TCP packets sent
out."
::= { cbQosIPHCStatsEntry 31 }
cbQosIPHCTcpFullHdrSentPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of total fullheader TCP packets sent out."
::= { cbQosIPHCStatsEntry 32 }
-- end of cbQosIPHCStatsTable
--
-- Start of cbQosSetStatsTable
cbQosSetStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosSetStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies packet marking statistical
information."
::= { cbQosSetStats 1 }
cbQosSetStatsEntry OBJECT-TYPE
SYNTAX CbQosSetStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the packets that
marked by each marking type.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific
IDs, namely cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosSetStatsTable 1 }
CbQosSetStatsEntry ::= SEQUENCE {
cbQosSetDscpPkt64 Counter64,
cbQosSetPrecedencePkt64 Counter64,
cbQosSetQosGroupPkt64 Counter64,
cbQosSetFrDePkt64 Counter64,
cbQosSetAtmClpPkt64 Counter64,
cbQosSetL2CosPkt64 Counter64,
cbQosSetMplsExpImpositionPkt64 Counter64,
cbQosSetDiscardClassPkt64 Counter64,
cbQosSetMplsExpTopMostPkt64 Counter64,
cbQosSetSrpPriorityPkt64 Counter64,
cbQosSetFrFecnBecnPkt64 Counter64,
cbQosSetDscpTunnelPkt64 Counter64,
cbQosSetPrecedenceTunnelPkt64 Counter64
}
cbQosSetDscpPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose DSCP field is
marked by Set feature."
::= { cbQosSetStatsEntry 1 }
cbQosSetPrecedencePkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Precedence field is
marked by Set feature."
::= { cbQosSetStatsEntry 2 }
cbQosSetQosGroupPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Qos Group field is
marked by Set feature."
::= { cbQosSetStatsEntry 3 }
cbQosSetFrDePkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Frame Relay DE Bit
is marked by Set feature."
::= { cbQosSetStatsEntry 4 }
cbQosSetAtmClpPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose ATM CLP Bit is
marked by Set feature."
::= { cbQosSetStatsEntry 5 }
cbQosSetL2CosPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Layer 2 Cos field is
marked by Set feature."
::= { cbQosSetStatsEntry 6 }
cbQosSetMplsExpImpositionPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose MPLS Experimental
Imposition field is marked by Set feature."
::= { cbQosSetStatsEntry 7 }
cbQosSetDiscardClassPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Discard Class field
is marked by Set feature."
::= { cbQosSetStatsEntry 8 }
cbQosSetMplsExpTopMostPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose MPLS Experimental
TopMost field is marked by Set feature."
::= { cbQosSetStatsEntry 9 }
cbQosSetSrpPriorityPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose SRP Priority field
is marked by Set feature."
::= { cbQosSetStatsEntry 10 }
cbQosSetFrFecnBecnPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Frame Relay FECN
BECN field is marked by Set feature."
::= { cbQosSetStatsEntry 11 }
cbQosSetDscpTunnelPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose DSCP Tunnel field is
marked by Set feature."
::= { cbQosSetStatsEntry 12 }
cbQosSetPrecedenceTunnelPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets whose Precedence Tunnel
field is marked by Set feature."
::= { cbQosSetStatsEntry 13 }
-- end of cbQosSetStats
--
--
-- Beginning of cbQosPoliceColorStats
cbQosPoliceColorStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceColorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action related Statistical
information for two rate color aware marker."
::= { cbQosPoliceColorStats 1 }
cbQosPoliceColorStatsEntry OBJECT-TYPE
SYNTAX CbQosPoliceColorStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about Police Action for Two Rate Color
Aware Marker.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosPoliceColorStatsTable 1 }
CbQosPoliceColorStatsEntry ::= SEQUENCE {
cbQosPoliceCfmColorCfmPkt64 Counter64,
cbQosPoliceCfmColorCfmByte64 Counter64,
cbQosPoliceCfmColorExdPkt64 Counter64,
cbQosPoliceCfmColorExdByte64 Counter64,
cbQosPoliceCfmColorVltPkt64 Counter64,
cbQosPoliceCfmColorVltByte64 Counter64,
cbQosPoliceExdColorExdPkt64 Counter64,
cbQosPoliceExdColorExdByte64 Counter64,
cbQosPoliceExdColorVltPkt64 Counter64,
cbQosPoliceExdColorVltByte64 Counter64,
cbQosPoliceVltColorVltPkt64 Counter64,
cbQosPoliceVltColorVltByte64 Counter64,
cbQosPoliceCfmColorCfmBitRate CounterBasedGauge64,
cbQosPoliceCfmColorExdBitRate CounterBasedGauge64,
cbQosPoliceCfmColorVltBitRate CounterBasedGauge64,
cbQosPoliceExdColorExdBitRate CounterBasedGauge64,
cbQosPoliceExdColorVltBitRate CounterBasedGauge64,
cbQosPoliceVltColorVltBitRate CounterBasedGauge64
}
cbQosPoliceCfmColorCfmPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets which are marked as
Conform-Color by previous node and treated as
conforming by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 1 }
cbQosPoliceCfmColorCfmByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes which are marked as
Conform-Color by previous node and treated as
conforming by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 2 }
cbQosPoliceCfmColorExdPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets which are marked as
Conform-Color by previous node and treated as
exceeding by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 3 }
cbQosPoliceCfmColorExdByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes which are marked as
Conform-Color by previous node and treated as
exceeding by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 4 }
cbQosPoliceCfmColorVltPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets which are marked as
Conform-Color by previous node and treated as
violating by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 5 }
cbQosPoliceCfmColorVltByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes which are marked as
Conform-Color by previous node and treated as
violating by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 6 }
cbQosPoliceExdColorExdPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets which are marked as
Exceed-Color by previous node and treated as
exceeding by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 7 }
cbQosPoliceExdColorExdByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes which are marked as
Exceed-Color by previous node and treated as
exceeding by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 8 }
cbQosPoliceExdColorVltPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets which are marked as
Exceed-Color by previous node and treated as
violating by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 9 }
cbQosPoliceExdColorVltByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes which are marked as
Exceed-Color by previous node and treated as
violating by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 10 }
cbQosPoliceVltColorVltPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets which are marked as
Violate-Color by previous node and treated as
violating by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 11 }
cbQosPoliceVltColorVltByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes which are marked as
Violate-Color by previous node and treated as
violating by the policing feature on this node."
::= { cbQosPoliceColorStatsEntry 12 }
cbQosPoliceCfmColorCfmBitRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of conform color class conform rate."
::= { cbQosPoliceColorStatsEntry 13 }
cbQosPoliceCfmColorExdBitRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of conform color class exceed rate."
::= { cbQosPoliceColorStatsEntry 14 }
cbQosPoliceCfmColorVltBitRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of conform color class violate rate."
::= { cbQosPoliceColorStatsEntry 15 }
cbQosPoliceExdColorExdBitRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of exceed color class exceed rate."
::= { cbQosPoliceColorStatsEntry 16 }
cbQosPoliceExdColorVltBitRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of exceed color class violate rate."
::= { cbQosPoliceColorStatsEntry 17 }
cbQosPoliceVltColorVltBitRate OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of violate color class violate rate."
::= { cbQosPoliceColorStatsEntry 18 }
-- end of cbQosPoliceColorStats
--
--
-- Beginning of cbQosTableMapCfg
cbQosTableMapCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTableMapCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Table Map basic configuration
information."
::= { cbQosTableMapCfg 1 }
cbQosTableMapCfgEntry OBJECT-TYPE
SYNTAX CbQosTableMapCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a tablemap name, behavior and default
value. Each cbQosTableMapCfgName is a unique character
string in QOS. This table contains configuration
information only, no statistics associated with it."
INDEX { cbQosTableMapCfgIndex }
::= { cbQosTableMapCfgTable 1 }
CbQosTableMapCfgEntry ::= SEQUENCE {
cbQosTableMapCfgIndex Unsigned32,
cbQosTableMapCfgName DisplayString,
cbQosTableMapCfgBehavior INTEGER,
cbQosTableMapCfgDftValue Unsigned32
}
cbQosTableMapCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for tablemap."
::= { cbQosTableMapCfgEntry 1 }
cbQosTableMapCfgName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the tablemap."
::= { cbQosTableMapCfgEntry 2 }
cbQosTableMapCfgBehavior OBJECT-TYPE
SYNTAX INTEGER {
value(1),
copy(2),
ignore(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The behavior of a tablemap.
value(1) Always set to-value to be a configurable
default value <0-99> which is defined in
cbQosTableMapCfgDftValue.
copy(2) Always copy from-value to to-value in case
the from-value is not found in the tablemap.
This is the default behavior for a tablemap.
ignore(3) Ignore to set to-value when from-value
is not found in the tablemap."
::= { cbQosTableMapCfgEntry 3 }
cbQosTableMapCfgDftValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configurable default value used when
cbQosTableMapCfgBehavior is value(1)."
::= { cbQosTableMapCfgEntry 4 }
-- end of cbQosTableMapCfg
--
--
-- Beginning of cbQosTableMapValueCfg
cbQosTableMapValueCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTableMapValueCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the from-value to to-value
conversion pairs for a tablemap."
::= { cbQosTableMapValueCfg 1 }
cbQosTableMapValueCfgEntry OBJECT-TYPE
SYNTAX CbQosTableMapValueCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table specifies a from-value to
to-value conversion pair for a given tablemap.
This table contains configuration information only,
no statistics associated with it."
INDEX {
cbQosTableMapCfgIndex,
cbQosTableMapValueCfgFrom
}
::= { cbQosTableMapValueCfgTable 1 }
CbQosTableMapValueCfgEntry ::= SEQUENCE {
cbQosTableMapValueCfgFrom Unsigned32,
cbQosTableMapValueCfgTo Unsigned32
}
cbQosTableMapValueCfgFrom OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the from-value in the tablemap. If
cbQosTableMapCfgBehavior equals to either copy(2) or
ignore(3), when the content in the from-type(e.g.,
cbQosTMSetIpDscpFromType) equals to this value, the
value in the to-type(e.g., IpDscp) will be set to
cbQosTableMapValueCfgTo. Each tablemap can configure
multiple from-value/to-value pairs."
::= { cbQosTableMapValueCfgEntry 1 }
cbQosTableMapValueCfgTo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the to-value in the tablemap. Its usage is
described in cbQosTableMapValueCfgFrom."
::= { cbQosTableMapValueCfgEntry 2 }
-- end of cbQosTableMapValueCfg
--
--
-- Beginning of cbQosTableMapSetCfg
cbQosTableMapSetCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTableMapSetCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies enhanced packet marking
configuration using a pre-defined tablemap."
::= { cbQosTableMapSetCfg 1 }
cbQosTableMapSetCfgEntry OBJECT-TYPE
SYNTAX CbQosTableMapSetCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information for an Enhanced Packet Marking Action.
The enhanced packet marking action uses a pre-configured
table-map to do the from-value to to-value conversion.
The packet marking to-type and from-type relationship
can be established by using the table-map.
Following is an example:
cbQosTMSetIpDscpFromType == qosGroup(3)
cbQosTMSetIpDscpMapName == 'MyTableMap',
it means that table-map 'MyTableMap' will be used to
convert the QosGroup value and the converted value will
be used to set IpDSCP.
cbQosConfigIndex is drived directly from
cbQosSetCfgTable to keep the 1-to-1 mapping between
two tables. This table contains configuration
information only, no statistics associated with it."
INDEX { cbQosConfigIndex }
::= { cbQosTableMapSetCfgTable 1 }
CbQosTableMapSetCfgEntry ::= SEQUENCE {
cbQosTMSetIpDscpFromType CbQosTMSetType,
cbQosTMSetIpDscpMapName DisplayString,
cbQosTMSetIpPrecedenceFromType CbQosTMSetType,
cbQosTMSetIpPrecedenceMapName DisplayString,
cbQosTMSetQosGroupFromType CbQosTMSetType,
cbQosTMSetQosGroupMapName DisplayString,
cbQosTMSetL2CosFromType CbQosTMSetType,
cbQosTMSetL2CosMapName DisplayString,
cbQosTMSetMplsExpImpFromType CbQosTMSetType,
cbQosTMSetMplsExpImpMapName DisplayString,
cbQosTMSetMplsExpTopFromType CbQosTMSetType,
cbQosTMSetMplsExpTopMapName DisplayString
}
cbQosTMSetIpDscpFromType OBJECT-TYPE
SYNTAX CbQosTMSetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set IpDSCP."
::= { cbQosTableMapSetCfgEntry 1 }
cbQosTMSetIpDscpMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a pre-configured table-map used to convert
and set IpDSCP value."
::= { cbQosTableMapSetCfgEntry 2 }
cbQosTMSetIpPrecedenceFromType OBJECT-TYPE
SYNTAX CbQosTMSetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set IpPrecedence."
::= { cbQosTableMapSetCfgEntry 3 }
cbQosTMSetIpPrecedenceMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a pre-configured table-map used to convert
and set IpPrecedence value."
::= { cbQosTableMapSetCfgEntry 4 }
cbQosTMSetQosGroupFromType OBJECT-TYPE
SYNTAX CbQosTMSetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set QosGroup."
::= { cbQosTableMapSetCfgEntry 5 }
cbQosTMSetQosGroupMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a pre-configured table-map used to convert
and set QosGroup value."
::= { cbQosTableMapSetCfgEntry 6 }
cbQosTMSetL2CosFromType OBJECT-TYPE
SYNTAX CbQosTMSetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set L2Cos."
::= { cbQosTableMapSetCfgEntry 7 }
cbQosTMSetL2CosMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a pre-configured table-map used to convert
and set L2Cos value."
::= { cbQosTableMapSetCfgEntry 8 }
cbQosTMSetMplsExpImpFromType OBJECT-TYPE
SYNTAX CbQosTMSetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set MplsExpImposition."
::= { cbQosTableMapSetCfgEntry 9 }
cbQosTMSetMplsExpImpMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a pre-configured table-map used to convert
and set MplsExpImposition value."
::= { cbQosTableMapSetCfgEntry 10 }
cbQosTMSetMplsExpTopFromType OBJECT-TYPE
SYNTAX CbQosTMSetType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set MplsExpTopMost."
::= { cbQosTableMapSetCfgEntry 11 }
cbQosTMSetMplsExpTopMapName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of a pre-configured table-map used to convert
and set MplsExpTopMost value."
::= { cbQosTableMapSetCfgEntry 12 }
-- end of cbQosTableMapSetCfg
--
--
-- Start of cbQosEBCfgTable
cbQosEBCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosEBCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Estimate Bandwidth related
configuration information."
::= { cbQosEBCfg 1 }
cbQosEBCfgEntry OBJECT-TYPE
SYNTAX CbQosEBCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about Estimate Bandwidth. It includes:
drop target, delay target and delay threshold.
This table contains configuration information only.
It is indexed by the cbQosConfigIndex."
INDEX { cbQosConfigIndex }
::= { cbQosEBCfgTable 1 }
CbQosEBCfgEntry ::= SEQUENCE {
cbQosEBCfgMechanism CbQosEBType,
cbQosEBCfgDropTarget Unsigned32,
cbQosEBCfgDelayTarget Unsigned32,
cbQosEBCfgDelayThreshold Unsigned32
}
cbQosEBCfgMechanism OBJECT-TYPE
SYNTAX CbQosEBType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bandwidth estimate algorithm type."
::= { cbQosEBCfgEntry 1 }
cbQosEBCfgDropTarget OBJECT-TYPE
SYNTAX Unsigned32 (50..1000000)
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One-in-Number target indicating that no more than
one packet in (this) number will be dropped."
::= { cbQosEBCfgEntry 2 }
cbQosEBCfgDelayTarget OBJECT-TYPE
SYNTAX Unsigned32 (50..1000000)
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One-in-Number target indicating that no more than
one packet in (this) number will exceed the delay
threshold specified by cbQosEBCfgDelayThreshold."
::= { cbQosEBCfgEntry 3 }
cbQosEBCfgDelayThreshold OBJECT-TYPE
SYNTAX Unsigned32 (16..1000)
UNITS "millisecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in milliseconds for the delay threshold."
::= { cbQosEBCfgEntry 4 }
-- End of cbQosEBCfgTable
--
--
-- Start of cbQosEBStatsTable
cbQosEBStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosEBStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Estimate Bandwidth related
statistical information."
::= { cbQosEBStats 1 }
cbQosEBStatsEntry OBJECT-TYPE
SYNTAX CbQosEBStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes Estimate Bandwidth
related statistical information."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex
}
::= { cbQosEBStatsTable 1 }
CbQosEBStatsEntry ::= SEQUENCE {
cbQosEBStatsCorvilEBValue Gauge32,
cbQosEBStatsCorvilEBStatus TruthValue,
cbQosEBStatsCorvilCTD CbQosEBCtd
}
cbQosEBStatsCorvilEBValue OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Corvil EB bandwidth value."
::= { cbQosEBStatsEntry 1 }
cbQosEBStatsCorvilEBStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if Corvil EB is ready.
true - Bandwidth estimate is available.
false - Bandwidth estimate is not available."
::= { cbQosEBStatsEntry 2 }
cbQosEBStatsCorvilCTD OBJECT-TYPE
SYNTAX CbQosEBCtd
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Corvil CTD value defined by CbQosEBCtd."
::= { cbQosEBStatsEntry 3 }
-- End of cbQosEBStatsTable
--
-- Start of cbQosC3plAccountCfgTable
cbQosC3plAccountCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosC3plAccountCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies C3pl Account Action configuration
information"
::= { cbQosC3plAccountCfg 1 }
cbQosC3plAccountCfgEntry OBJECT-TYPE
SYNTAX CbQosC3plAccountCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a c3pl account action. The information
includes: feature type.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each C3pl Account Action."
INDEX { cbQosConfigIndex }
::= { cbQosC3plAccountCfgTable 1 }
CbQosC3plAccountCfgEntry ::= SEQUENCE {
cbQosC3plAccountFeatureType SetC3plAccountFeatureType
}
cbQosC3plAccountFeatureType OBJECT-TYPE
SYNTAX SetC3plAccountFeatureType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The feature type is used to indicated different drop
statistics."
::= { cbQosC3plAccountCfgEntry 1 }
-- End of cbQosQueueingCfg Group
--
--
-- Start of cbQosC3plAccountStats group
cbQosC3plAccountStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosC3plAccountStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies C3pl Account Action related
statistics information."
::= { cbQosC3plAccountStats 1 }
cbQosC3plAccountStatsEntry OBJECT-TYPE
SYNTAX CbQosC3plAccountStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about C3pl Account Action. Account action
specific information you can find in this table are :
queueing drop pkt/byte counters, wred drop pkt/byte
counters, police pkt/byte counters.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex, cbQosObjectsIndex, and
cbQosC3plAccountFeatureType."
INDEX {
cbQosPolicyIndex,
cbQosObjectsIndex,
cbQosC3plAccountFeatureType
}
::= { cbQosC3plAccountStatsTable 1 }
CbQosC3plAccountStatsEntry ::= SEQUENCE {
cbQosC3plAccountDropPktOverflow Counter32,
cbQosC3plAccountDropPkt Counter32,
cbQosC3plAccountDropPkt64 Counter64,
cbQosC3plAccountDropByteOverflow Counter32,
cbQosC3plAccountDropByte Counter32,
cbQosC3plAccountDropByte64 Counter64,
cbQosC3plAccountTailDropPktOverflow Counter32,
cbQosC3plAccountTailDropPkt Counter32,
cbQosC3plAccountTailDropPkt64 Counter64,
cbQosC3plAccountTailDropByteOverflow Counter32,
cbQosC3plAccountTailDropByte Counter32,
cbQosC3plAccountTailDropByte64 Counter64
}
cbQosC3plAccountDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosC3plAccountStatsEntry 1 }
cbQosC3plAccountDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosC3plAccountStatsEntry 2 }
cbQosC3plAccountDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosC3plAccountStatsEntry 3 }
cbQosC3plAccountDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosC3plAccountStatsEntry 4 }
cbQosC3plAccountDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosC3plAccountStatsEntry 5 }
cbQosC3plAccountDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosC3plAccountStatsEntry 6 }
cbQosC3plAccountTailDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosC3plAccountStatsEntry 7 }
cbQosC3plAccountTailDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosC3plAccountStatsEntry 8 }
cbQosC3plAccountTailDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosC3plAccountStatsEntry 9 }
cbQosC3plAccountTailDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosC3plAccountStatsEntry 10 }
cbQosC3plAccountTailDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosC3plAccountStatsEntry 11 }
cbQosC3plAccountTailDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the maximum threshold."
::= { cbQosC3plAccountStatsEntry 12 }
-- end of cbQosC3plAccountStatsTable
ciscocbQosMIBCompliances OBJECT IDENTIFIER
::= { ciscocbQosMIBConformance 1 }
ciscocbQosMIBGroups OBJECT IDENTIFIER
::= { ciscocbQosMIBConformance 2 }
-- compliance statements
ciscocbQosMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroup,
cbQosREDCfgGroup,
cbQosREDClassCfgGroup,
cbQosPoliceCfgGroup,
cbQosTSCfgGroup,
cbQosSetCfgGroup,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
::= { ciscocbQosMIBCompliances 1 }
ciscocbQosMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBCompliance."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev1,
cbQosTSCfgGroup,
cbQosSetCfgGroup,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
::= { ciscocbQosMIBCompliances 2 }
ciscocbQosMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev1."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosNewSetCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos config."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
::= { ciscocbQosMIBCompliances 3 }
-- units of conformance
ciscocbQosMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev2."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosNewSetCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos config."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
::= { ciscocbQosMIBCompliances 4 }
-- units of conformance
ciscocbQosMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev2."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosNewSetCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos config."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
::= { ciscocbQosMIBCompliances 5 }
ciscocbQosMIBComplianceRev5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev4."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosNewSetCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos config."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
::= { ciscocbQosMIBCompliances 6 }
ciscocbQosMIBComplianceRev6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev5."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
::= { ciscocbQosMIBCompliances 7 }
ciscocbQosMIBComplianceRev7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev5."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
::= { ciscocbQosMIBCompliances 8 }
ciscocbQosMIBComplianceRev8 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev7."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosSetCfgFrDeGroup
DESCRIPTION
"Optional group providing information on frame-relay discard bit
in frame-relay header on platforms supporting frame-relay."
::= { ciscocbQosMIBCompliances 9 }
ciscocbQosMIBComplianceRev9 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev8."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosEVCGroup
DESCRIPTION
"This group is only available on platforms
supporting EVC."
GROUP cbQosFragmentGroup
DESCRIPTION
"This group is only available on platforms
supporting service fragment."
::= { ciscocbQosMIBCompliances 10 }
ciscocbQosMIBComplianceRev10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev9."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosEVCGroup
DESCRIPTION
"This group is only available on platforms
supporting EVC."
GROUP cbQosFragmentGroup
DESCRIPTION
"This group is only available on platforms
supporting service fragment."
GROUP cbQosSetCfgExt
DESCRIPTION
"This group is only available on platforms supporting marking on
dei and tunnel."
GROUP cbQosPoliceColorStatsExt
DESCRIPTION
"This group is only available on platforms supporting police
color aware feature."
GROUP cbQosIPHCCfgExt
DESCRIPTION
"This group is only available on platforms supporting
policy action IPHC."
GROUP cbQosIPHCStatsExt
DESCRIPTION
"This group is only available on platforms supporting IPHC."
::= { ciscocbQosMIBCompliances 11 }
ciscocbQosMIBComplianceRev11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev10."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup,
cbQos421XRCfgExt
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosEVCGroup
DESCRIPTION
"This group is only available on platforms
supporting EVC."
GROUP cbQosFragmentGroup
DESCRIPTION
"This group is only available on platforms
supporting service fragment."
GROUP cbQosSetCfgExt
DESCRIPTION
"This group is only available on platforms supporting marking on
dei and tunnel."
GROUP cbQosPoliceColorStatsExt
DESCRIPTION
"This group is only available on platforms supporting police
color aware feature."
GROUP cbQosIPHCCfgExt
DESCRIPTION
"This group is only available on platforms supporting
policy action IPHC."
GROUP cbQosIPHCStatsExt
DESCRIPTION
"This group is only available on platforms supporting IPHC."
::= { ciscocbQosMIBCompliances 12 }
ciscocbQosMIBComplianceRev12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev11."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup,
cbQos421XRCfgExt,
cbQosBitRateExt
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosEVCGroup
DESCRIPTION
"This group is only available on platforms
supporting EVC."
GROUP cbQosFragmentGroup
DESCRIPTION
"This group is only available on platforms
supporting service fragment."
GROUP cbQosSetCfgExt
DESCRIPTION
"This group is only available on platforms supporting marking on
dei and tunnel."
GROUP cbQosPoliceColorStatsExt
DESCRIPTION
"This group is only available on platforms supporting police
color aware feature."
GROUP cbQosIPHCCfgExt
DESCRIPTION
"This group is only available on platforms supporting
policy action IPHC."
GROUP cbQosIPHCStatsExt
DESCRIPTION
"This group is only available on platforms supporting IPHC."
::= { ciscocbQosMIBCompliances 13 }
ciscocbQosMIBComplianceRev13 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev12."
MODULE -- this module
MANDATORY-GROUPS {
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev2,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev2,
cbQosPoliceCfgGroupRev3,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup,
cbQosQueueingClassCfgGroup,
cbQos421XRCfgExt,
cbQosBitRateExt
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED transmit stats."
GROUP cbQosREDECNCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN configuration."
GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION
"This group is only available on platforms that
supporting WRED ECN stats."
GROUP cbQosAFPoliceStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting POLICE violate action stats."
GROUP cbQosPoliceCfgPirGroup
DESCRIPTION
"This group is only available on platforms that
supporting police PIR configuration."
GROUP cbQosPoliceCfgExtGroup
DESCRIPTION
"This group is only available for code running on the
Catalyst 4000 platform."
GROUP cbQosPoliceActionCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."
GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting multiple POLICE violate actions."
GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTSCfgPercentGroup
DESCRIPTION
"This group is only available on platforms that
supporting committed shaping rate in percentage."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."
GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET Discard Class config."
GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."
GROUP cbQosIPHCCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC configuration."
GROUP cbQosIPHCStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting IPHC stats."
GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Queue limit configuration."
GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based RED threshold configuration."
GROUP cbQosPoliceCfgCellGroup
DESCRIPTION
"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."
GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Policing Burst configuration."
GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing ATM CDVT configuration."
GROUP cbQosPoliceCfgColorGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware configuration."
GROUP cbQosTSCfgTimeGroup
DESCRIPTION
"This group is only available on platforms that
supporting time-based Shaping Burst configuration."
GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION
"This group is only available on platforms that
supporting SRP Priority SET configuration."
GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION
"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."
GROUP cbQosSetStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET stats."
GROUP cbQosPoliceColorStatsGroup
DESCRIPTION
"This group is only available on platforms that
supporting Policing Color Aware stats."
GROUP cbQosTableMapCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth."
GROUP cbQosEBStatsGroup
DESCRIPTION
"This group is only available on platforms
supporting Estimate Bandwidth stats."
GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION
"Optional objects to configure IPSLA measure action."
GROUP cbQosTSCfgExtGroup
DESCRIPTION
"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."
GROUP cbQosSetCfgL2Group
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos or SET L2 Cos Inner config."
GROUP cbQosServicePolicyExtGroup
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
GROUP cbQosC3plAccountCfgGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosC3plAccountStatsGroup
DESCRIPTION
"This group is only available on platform that supporting
c3pl account action configuration information."
GROUP cbQosEVCGroup
DESCRIPTION
"This group is only available on platforms
supporting EVC."
GROUP cbQosFragmentGroup
DESCRIPTION
"This group is only available on platforms
supporting service fragment."
GROUP cbQosSetCfgExt
DESCRIPTION
"This group is only available on platforms supporting marking on
dei and tunnel."
GROUP cbQosPoliceColorStatsExt
DESCRIPTION
"This group is only available on platforms supporting police
color aware feature."
GROUP cbQosIPHCCfgExt
DESCRIPTION
"This group is only available on platforms supporting
policy action IPHC."
GROUP cbQosIPHCStatsExt
DESCRIPTION
"This group is only available on platforms supporting IPHC."
GROUP cbQosQueueingStatsGroupRev1
DESCRIPTION
"This group is only available on platforms supporting these
additional queueing related information."
::= { ciscocbQosMIBCompliances 14 }
cbQosServicePolicyGroup OBJECT-GROUP
OBJECTS {
cbQosIfType,
cbQosPolicyDirection,
cbQosIfIndex,
cbQosFrDLCI,
cbQosAtmVPI,
cbQosAtmVCI
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosServicePolicyGroup object is superseded by cbQosServicePolicyGroupRev1."
::= { ciscocbQosMIBGroups 1 }
cbQosInterfacePolicyGroup OBJECT-GROUP
OBJECTS { cbQosIFPolicyIndex }
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 2 }
cbQosFrameRelayVCPolicyGroup OBJECT-GROUP
OBJECTS { cbQosFRPolicyIndex }
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 3 }
cbQosATMPVCPolicyGroup OBJECT-GROUP
OBJECTS { cbQosATMPolicyIndex }
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 4 }
cbQosObjectsGroup OBJECT-GROUP
OBJECTS {
cbQosConfigIndex,
cbQosObjectsType,
cbQosParentObjectsIndex
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 5 }
cbQosPolicyMapCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPolicyMapName,
cbQosPolicyMapDesc
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 6 }
cbQosClassMapCfgGroup OBJECT-GROUP
OBJECTS {
cbQosCMName,
cbQosCMDesc,
cbQosCMInfo
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 7 }
cbQosMatchStmtCfgGroup OBJECT-GROUP
OBJECTS {
cbQosMatchStmtName,
cbQosMatchStmtInfo
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 8 }
cbQosQueueingCfgGroup OBJECT-GROUP
OBJECTS {
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgAggregateQSize,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosQueueingCfgGroup object is superseded by cbQosQueueingCfgGroupRev1."
::= { ciscocbQosMIBGroups 9 }
cbQosREDCfgGroup OBJECT-GROUP
OBJECTS {
cbQosREDCfgExponWeight,
cbQosREDCfgMeanQsize
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosREDCfgGroup object is superseded by cbQosREDCfgGroupRev1."
::= { ciscocbQosMIBGroups 10 }
cbQosREDClassCfgGroup OBJECT-GROUP
OBJECTS {
cbQosREDCfgMinThreshold,
cbQosREDCfgMaxThreshold,
cbQosREDCfgPktDropProb
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosREDClassCfgGroup object is superseded by cbQosREDClassCfgGroupRev1."
::= { ciscocbQosMIBGroups 11 }
cbQosPoliceCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgConformAction,
cbQosPoliceCfgConformSetValue,
cbQosPoliceCfgExceedAction,
cbQosPoliceCfgExceedSetValue,
cbQosPoliceCfgPir
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosPoliceCfgGroup object is superseded by cbQosPoliceCfgGroupRev1."
::= { ciscocbQosMIBGroups 12 }
cbQosTSCfgGroup OBJECT-GROUP
OBJECTS {
cbQosTSCfgRate,
cbQosTSCfgBurstSize,
cbQosTSCfgExtBurstSize,
cbQosTSCfgAdaptiveEnabled,
cbQosTSCfgAdaptiveRate,
cbQosTSCfgLimitType
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 13 }
cbQosSetCfgGroup OBJECT-GROUP
OBJECTS {
cbQosSetCfgFeature,
cbQosSetCfgIpDSCPValue,
cbQosSetCfgIpPrecedenceValue,
cbQosSetCfgQosGroupValue,
cbQosSetCfgL2CosValue,
cbQosSetCfgMplsExpValue,
cbQosSetCfgDiscardClassValue
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosSetCfgGroup object is superseded by cbQosSetCfgGroupRev1."
::= { ciscocbQosMIBGroups 14 }
cbQosClassMapStatsGroup OBJECT-GROUP
OBJECTS {
cbQosCMPrePolicyPktOverflow,
cbQosCMPrePolicyPkt,
cbQosCMPrePolicyPkt64,
cbQosCMPrePolicyByteOverflow,
cbQosCMPrePolicyByte,
cbQosCMPrePolicyByte64,
cbQosCMPrePolicyBitRate,
cbQosCMPostPolicyByteOverflow,
cbQosCMPostPolicyByte,
cbQosCMPostPolicyByte64,
cbQosCMPostPolicyBitRate,
cbQosCMDropPktOverflow,
cbQosCMDropPkt,
cbQosCMDropPkt64,
cbQosCMDropByteOverflow,
cbQosCMDropByte,
cbQosCMDropByte64,
cbQosCMDropBitRate
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 15 }
cbQosNoBufferDropGroup OBJECT-GROUP
OBJECTS {
cbQosCMNoBufDropPktOverflow,
cbQosCMNoBufDropPkt,
cbQosCMNoBufDropPkt64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS summary statistics."
::= { ciscocbQosMIBGroups 16 }
cbQosQueueingDynamicQNumberGroup OBJECT-GROUP
OBJECTS { cbQosQueueingCfgDynamicQNumber }
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS Queueing information."
::= { ciscocbQosMIBGroups 17 }
cbQosTrafficShapingDelayCountersGroup OBJECT-GROUP
OBJECTS {
cbQosTSStatsDelayedByteOverflow,
cbQosTSStatsDelayedByte,
cbQosTSStatsDelayedByte64,
cbQosTSStatsDelayedPktOverflow,
cbQosTSStatsDelayedPkt,
cbQosTSStatsDelayedPkt64,
cbQosTSStatsActive
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS traffic-shaping
information."
::= { ciscocbQosMIBGroups 18 }
cbQosMatchStmtStatsGroup OBJECT-GROUP
OBJECTS {
cbQosMatchPrePolicyPktOverflow,
cbQosMatchPrePolicyPkt,
cbQosMatchPrePolicyPkt64,
cbQosMatchPrePolicyByteOverflow,
cbQosMatchPrePolicyByte,
cbQosMatchPrePolicyByte64,
cbQosMatchPrePolicyBitRate
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 19 }
cbQosPoliceStatsGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceConformedPktOverflow,
cbQosPoliceConformedPkt,
cbQosPoliceConformedPkt64,
cbQosPoliceConformedByteOverflow,
cbQosPoliceConformedByte,
cbQosPoliceConformedByte64,
cbQosPoliceConformedBitRate,
cbQosPoliceExceededPktOverflow,
cbQosPoliceExceededPkt,
cbQosPoliceExceededPkt64,
cbQosPoliceExceededByteOverflow,
cbQosPoliceExceededByte,
cbQosPoliceExceededByte64,
cbQosPoliceExceededBitRate
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 20 }
cbQosQueueingStatsGroup OBJECT-GROUP
OBJECTS {
cbQosQueueingCurrentQDepth,
cbQosQueueingMaxQDepth,
cbQosQueueingDiscardByteOverflow,
cbQosQueueingDiscardByte,
cbQosQueueingDiscardByte64,
cbQosQueueingDiscardPktOverflow,
cbQosQueueingDiscardPkt,
cbQosQueueingDiscardPkt64
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 21 }
cbQosTSStatsGroup OBJECT-GROUP
OBJECTS {
cbQosTSStatsDropByteOverflow,
cbQosTSStatsDropByte,
cbQosTSStatsDropByte64,
cbQosTSStatsDropPktOverflow,
cbQosTSStatsDropPkt,
cbQosTSStatsDropPkt64,
cbQosTSStatsCurrentQSize
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 22 }
cbQosREDClassStatsGroup OBJECT-GROUP
OBJECTS {
cbQosREDRandomDropPktOverflow,
cbQosREDRandomDropPkt,
cbQosREDRandomDropPkt64,
cbQosREDRandomDropByteOverflow,
cbQosREDRandomDropByte,
cbQosREDRandomDropByte64,
cbQosREDTailDropPktOverflow,
cbQosREDTailDropPkt,
cbQosREDTailDropPkt64,
cbQosREDTailDropByteOverflow,
cbQosREDTailDropByte,
cbQosREDTailDropByte64,
cbQosREDMeanQSizeUnits,
cbQosREDMeanQSize
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 23 }
cbQosREDClassXmitCountersGroup OBJECT-GROUP
OBJECTS {
cbQosREDTransmitPktOverflow,
cbQosREDTransmitPkt,
cbQosREDTransmitPkt64,
cbQosREDTransmitByteOverflow,
cbQosREDTransmitByte,
cbQosREDTransmitByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 24 }
cbQosAFPoliceStatsGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceViolatedPktOverflow,
cbQosPoliceViolatedPkt,
cbQosPoliceViolatedPkt64,
cbQosPoliceViolatedByteOverflow,
cbQosPoliceViolatedByte,
cbQosPoliceViolatedByte64,
cbQosPoliceViolatedBitRate
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 25 }
cbQosAFPoliceCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgViolateAction,
cbQosPoliceCfgViolateSetValue
}
STATUS deprecated
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information.
cbQosAFPoliceCfgGroup object is superseded by cbQosAFPoliceViolateCfgGroup."
::= { ciscocbQosMIBGroups 26 }
cbQosREDDscpCfgGroup OBJECT-GROUP
OBJECTS { cbQosREDCfgDscpPrec }
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 27 }
cbQosNewSetCfgGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgL2CosValue }
STATUS deprecated
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information.
cbQosNewSetCfgGroup object is superseded by cbQosSetCfgL2Group."
::= { ciscocbQosMIBGroups 28 }
cbQosQueueingCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize,
cbQosQueueingCfgQLimitUnits,
cbQosQueueingCfgAggregateQLimit
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosQueueingCfgGroupRev1 object is superseded by cbQosQueueingCfgGroupRev2."
::= { ciscocbQosMIBGroups 29 }
cbQosREDCfgGroupRev1 OBJECT-GROUP
OBJECTS { cbQosREDCfgExponWeight }
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 30 }
cbQosREDClassCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosREDCfgPktDropProb,
cbQosREDClassCfgThresholdUnit,
cbQosREDClassCfgMinThreshold,
cbQosREDClassCfgMaxThreshold
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosREDClassCfgGroupRev1 object is superseded by ."
::= { ciscocbQosMIBGroups 31 }
cbQosPoliceCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgPir
}
STATUS deprecated
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information.
cbQosPoliceCfgGroupRev1 object is superseded by cbQosPoliceCfgGroupRev2."
::= { ciscocbQosMIBGroups 32 }
cbQosPoliceActionCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceActionCfgConform,
cbQosPoliceActionCfgConformSetValue,
cbQosPoliceActionCfgExceed,
cbQosPoliceActionCfgExceedSetValue
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 33 }
cbQosAFPoliceViolateCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceActionCfgViolate,
cbQosPoliceActionCfgViolateSetValue
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 34 }
cbQosREDECNCfgGroup OBJECT-GROUP
OBJECTS { cbQosREDCfgECNEnabled }
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 35 }
cbQosREDClassECNMarkCountersGroup OBJECT-GROUP
OBJECTS {
cbQosREDECNMarkPktOverflow,
cbQosREDECNMarkPkt,
cbQosREDECNMarkPkt64,
cbQosREDECNMarkByteOverflow,
cbQosREDECNMarkByte,
cbQosREDECNMarkByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 36 }
cbQosPoliceCfgExtGroup OBJECT-GROUP
OBJECTS { cbQosPoliceCfgRate64 }
STATUS current
DESCRIPTION
"Optional objects to provide the information of the
committed policing rate that is greater than the
maximum value reportable by cbQosPoliceCfgRate."
::= { ciscocbQosMIBGroups 37 }
cbQosSetCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosSetCfgFeature,
cbQosSetCfgIpDSCPValue,
cbQosSetCfgIpPrecedenceValue,
cbQosSetCfgQosGroupValue
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information for SET/Marking feature."
::= { ciscocbQosMIBGroups 38 }
cbQosSetCfgMplsImpositionGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgMplsExpValue }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS objects configuration
information for SET/Marking feature."
::= { ciscocbQosMIBGroups 39 }
cbQosSetCfgDiscardClassGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgDiscardClassValue }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS objects configuration
information for SET/Marking feature."
::= { ciscocbQosMIBGroups 40 }
cbQosSetCfgMPLSTopMostGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgMplsExpTopMostValue }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS objects configuration
information for SET/Marking feature."
::= { ciscocbQosMIBGroups 41 }
cbQosPoliceCfgGroupRev2 OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information for POLICE feature."
::= { ciscocbQosMIBGroups 42 }
cbQosPoliceCfgPirGroup OBJECT-GROUP
OBJECTS { cbQosPoliceCfgPir }
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS policing PIR rate."
::= { ciscocbQosMIBGroups 43 }
cbQosPoliceCfgPercentGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRateType,
cbQosPoliceCfgPercentRateValue,
cbQosPoliceCfgPercentPirValue
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS policing CIR and PIR
rates in percentage."
::= { ciscocbQosMIBGroups 44 }
cbQosTSCfgPercentGroup OBJECT-GROUP
OBJECTS {
cbQosTSCfgRateType,
cbQosTSCfgPercentRateValue
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS committed
traffic-shaping rate in percentage."
::= { ciscocbQosMIBGroups 45 }
cbQosIPHCCfgGroup OBJECT-GROUP
OBJECTS { cbQosIPHCCfgOption }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS IP header compression
configuration information."
::= { ciscocbQosMIBGroups 46 }
cbQosIPHCStatsGroup OBJECT-GROUP
OBJECTS {
cbQosIPHCRtpSentPktOverflow,
cbQosIPHCRtpSentPkt,
cbQosIPHCRtpSentPkt64,
cbQosIPHCRtpCmprsOutPktOverflow,
cbQosIPHCRtpCmprsOutPkt,
cbQosIPHCRtpCmprsOutPkt64,
cbQosIPHCRtpSavedByteOverflow,
cbQosIPHCRtpSavedByte,
cbQosIPHCRtpSavedByte64,
cbQosIPHCRtpSentByteOverflow,
cbQosIPHCRtpSentByte,
cbQosIPHCRtpSentByte64,
cbQosIPHCRtpSentByteRate,
cbQosIPHCTcpSentPktOverflow,
cbQosIPHCTcpSentPkt,
cbQosIPHCTcpSentPkt64,
cbQosIPHCTcpCmprsOutPktOverflow,
cbQosIPHCTcpCmprsOutPkt,
cbQosIPHCTcpCmprsOutPkt64,
cbQosIPHCTcpSavedByteOverflow,
cbQosIPHCTcpSavedByte,
cbQosIPHCTcpSavedByte64,
cbQosIPHCTcpSentByteOverflow,
cbQosIPHCTcpSentByte,
cbQosIPHCTcpSentByte64,
cbQosIPHCTcpSentByteRate
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS IP header compression
statistic information."
::= { ciscocbQosMIBGroups 47 }
cbQosServicePolicyGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosIfType,
cbQosPolicyDirection,
cbQosIfIndex,
cbQosFrDLCI,
cbQosAtmVPI,
cbQosAtmVCI,
cbQosEntityIndex
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information. This group deprecates
cbQosServicePolicyGroup."
::= { ciscocbQosMIBGroups 48 }
cbQosQueueingCfgQLimitTimeGroup OBJECT-GROUP
OBJECTS { cbQosQueueingCfgAggrQLimitTime }
STATUS current
DESCRIPTION
"Optional object to provide Aggregate Queue time based
Limit configuration information."
::= { ciscocbQosMIBGroups 49 }
cbQosREDCfgThresholdTimeGroup OBJECT-GROUP
OBJECTS {
cbQosREDClassCfgMinThresholdTime,
cbQosREDClassCfgMaxThresholdTime
}
STATUS current
DESCRIPTION
"Optional objects to provide WRED time based threshold
Limit configuration information."
::= { ciscocbQosMIBGroups 50 }
cbQosPoliceCfgCellGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgCellRate,
cbQosPoliceCfgCellPir,
cbQosPoliceCfgBurstCell,
cbQosPoliceCfgExtBurstCell
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS policing cell based
rate configuration information."
::= { ciscocbQosMIBGroups 51 }
cbQosPoliceCfgTimeGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgBurstTime,
cbQosPoliceCfgExtBurstTime
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS policing time based
burst size configuration information."
::= { ciscocbQosMIBGroups 52 }
cbQosPoliceCfgCdvtGroup OBJECT-GROUP
OBJECTS { cbQosPoliceCfgCdvt }
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS policing ATM CDVT
configuration information."
::= { ciscocbQosMIBGroups 53 }
cbQosPoliceCfgColorGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgConformColor,
cbQosPoliceCfgExceedColor
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS policing color aware
configuration information."
::= { ciscocbQosMIBGroups 54 }
cbQosTSCfgTimeGroup OBJECT-GROUP
OBJECTS {
cbQosTSCfgBurstTime,
cbQosTSCfgExtBurstTime
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS traffic-shaping
time based burst size configuration information."
::= { ciscocbQosMIBGroups 55 }
cbQosSetCfgSrpPriorityGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgSrpPriority }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS SET SRP Priority
configuration information."
::= { ciscocbQosMIBGroups 56 }
cbQosSetCfgFrFecnBecnGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgFrFecnBecn }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS SET Frame Relay
FECN BECN configuration information."
::= { ciscocbQosMIBGroups 57 }
cbQosSetStatsGroup OBJECT-GROUP
OBJECTS {
cbQosSetDscpPkt64,
cbQosSetPrecedencePkt64,
cbQosSetQosGroupPkt64,
cbQosSetFrDePkt64,
cbQosSetAtmClpPkt64,
cbQosSetL2CosPkt64,
cbQosSetMplsExpImpositionPkt64,
cbQosSetDiscardClassPkt64,
cbQosSetMplsExpTopMostPkt64,
cbQosSetSrpPriorityPkt64,
cbQosSetFrFecnBecnPkt64,
cbQosSetDscpTunnelPkt64,
cbQosSetPrecedenceTunnelPkt64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS SET statistical
information."
::= { ciscocbQosMIBGroups 58 }
cbQosPoliceColorStatsGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfmColorCfmPkt64,
cbQosPoliceCfmColorCfmByte64,
cbQosPoliceCfmColorExdPkt64,
cbQosPoliceCfmColorExdByte64,
cbQosPoliceCfmColorVltPkt64,
cbQosPoliceCfmColorVltByte64,
cbQosPoliceExdColorExdPkt64,
cbQosPoliceExdColorExdByte64,
cbQosPoliceExdColorVltPkt64,
cbQosPoliceExdColorVltByte64,
cbQosPoliceVltColorVltPkt64,
cbQosPoliceVltColorVltByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS Assured Forwarding
Policing Color Aware statistical information."
::= { ciscocbQosMIBGroups 59 }
cbQosTableMapCfgGroup OBJECT-GROUP
OBJECTS {
cbQosTableMapCfgName,
cbQosTableMapCfgBehavior,
cbQosTableMapCfgDftValue,
cbQosTableMapValueCfgTo,
cbQosTMSetIpDscpFromType,
cbQosTMSetIpDscpMapName,
cbQosTMSetIpPrecedenceFromType,
cbQosTMSetIpPrecedenceMapName,
cbQosTMSetQosGroupFromType,
cbQosTMSetQosGroupMapName,
cbQosTMSetL2CosFromType,
cbQosTMSetL2CosMapName,
cbQosTMSetMplsExpImpFromType,
cbQosTMSetMplsExpImpMapName,
cbQosTMSetMplsExpTopFromType,
cbQosTMSetMplsExpTopMapName
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS Enhanced Packet
Marking configuration information."
::= { ciscocbQosMIBGroups 60 }
cbQosEBCfgGroup OBJECT-GROUP
OBJECTS {
cbQosEBCfgMechanism,
cbQosEBCfgDropTarget,
cbQosEBCfgDelayTarget,
cbQosEBCfgDelayThreshold
}
STATUS current
DESCRIPTION
"Optional objects to provide Estimate Bandwidth
configuration information."
::= { ciscocbQosMIBGroups 61 }
cbQosEBStatsGroup OBJECT-GROUP
OBJECTS {
cbQosEBStatsCorvilEBValue,
cbQosEBStatsCorvilEBStatus,
cbQosEBStatsCorvilCTD
}
STATUS current
DESCRIPTION
"Optional objects to provide Estimate Bandwidth
status information."
::= { ciscocbQosMIBGroups 62 }
cbQosServicePolicyExtGroup OBJECT-GROUP
OBJECTS { cbQosVlanIndex }
STATUS current
DESCRIPTION
"Optional objects to provide more information about a
particular service policy instance."
::= { ciscocbQosMIBGroups 63 }
cbQosMeasureIPSLACfgGroup OBJECT-GROUP
OBJECTS {
cbQosMeasureIPSLACfgGroupIndex,
cbQosMeasureIPSLACfgGroupName
}
STATUS current
DESCRIPTION
"Optional objects to configure IPSLA measure action."
::= { ciscocbQosMIBGroups 64 }
cbQosTSCfgExtGroup OBJECT-GROUP
OBJECTS { cbQosTSCfgRate64 }
STATUS current
DESCRIPTION
"Objects to provide the information of the
committed shaping rate that is greater than the
maximum value reportable by cbQosTSCfgRate."
::= { ciscocbQosMIBGroups 65 }
cbQosQueueingCfgGroupRev2 OBJECT-GROUP
OBJECTS {
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize,
cbQosQueueingCfgQLimitUnits,
cbQosQueueingCfgAggregateQLimit,
cbQosQueueingCfgPriorityLevel
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information"
::= { ciscocbQosMIBGroups 66 }
cbQosSetCfgL2Group OBJECT-GROUP
OBJECTS {
cbQosSetCfgL2CosValue,
cbQosSetCfgL2CosInnerValue
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information"
::= { ciscocbQosMIBGroups 67 }
cbQosREDClassCfgGroupRev2 OBJECT-GROUP
OBJECTS {
cbQosREDCfgPktDropProb,
cbQosREDClassCfgMinThreshold,
cbQosREDClassCfgMaxThreshold,
cbQosREDClassCfgMinThresholdTime,
cbQosREDClassCfgMaxThresholdTime,
cbQosREDClassCfgMaxThresholdUnit,
cbQosREDClassCfgMinThresholdUnit
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 68 }
cbQosQueueingClassCfgGroup OBJECT-GROUP
OBJECTS {
cbQosQueueingClassCfgThreshold,
cbQosQueueingClassCfgThresholdUnit,
cbQosQueueingClassCfgQLimitWeight
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information"
::= { ciscocbQosMIBGroups 69 }
cbQosPoliceCfgGroupRev3 OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgConditional
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information for POLICE feature"
::= { ciscocbQosMIBGroups 70 }
cbQosC3plAccountCfgGroup OBJECT-GROUP
OBJECTS { cbQosC3plAccountFeatureType }
STATUS current
DESCRIPTION
"Required objects to provide c3pl account action
configuration information (provide drop types) ."
::= { ciscocbQosMIBGroups 71 }
cbQosC3plAccountStatsGroup OBJECT-GROUP
OBJECTS {
cbQosC3plAccountDropPktOverflow,
cbQosC3plAccountDropPkt,
cbQosC3plAccountDropPkt64,
cbQosC3plAccountDropByteOverflow,
cbQosC3plAccountDropByte,
cbQosC3plAccountDropByte64,
cbQosC3plAccountTailDropPktOverflow,
cbQosC3plAccountTailDropPkt,
cbQosC3plAccountTailDropPkt64,
cbQosC3plAccountTailDropByteOverflow,
cbQosC3plAccountTailDropByte,
cbQosC3plAccountTailDropByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide c3pl account action
statistics information."
::= { ciscocbQosMIBGroups 72 }
cbQosSetCfgFrDeGroup OBJECT-GROUP
OBJECTS { cbQosSetCfgFrDe }
STATUS current
DESCRIPTION
"Optional object to provide CB QoS objects marking
configuration information on frame relay header."
::= { ciscocbQosMIBGroups 73 }
cbQosEVCGroup OBJECT-GROUP
OBJECTS { cbQosEVC }
STATUS current
DESCRIPTION
"Optional objects to provide EVC information."
::= { ciscocbQosMIBGroups 74 }
cbQosFragmentGroup OBJECT-GROUP
OBJECTS {
cbQosCMFragmentPktOverflow,
cbQosCMFragmentPkt,
cbQosCMFragmentPkt64,
cbQosCMFragmentByteOverflow,
cbQosCMFragmentByte,
cbQosCMFragmentByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide Service Fragment information."
::= { ciscocbQosMIBGroups 75 }
cbQosSetCfgExt OBJECT-GROUP
OBJECTS {
cbQosSetCfgIpPrecedenceTunnelValue,
cbQosSetCfgIpDSCPTunnelValue,
cbQosSetCfgDei,
cbQosSetCfgDeiImposition
}
STATUS current
DESCRIPTION
"Additional objects for configuring mark action on precedence
tunnel,dscp tunnel, dei, dei imposition."
::= { ciscocbQosMIBGroups 76 }
cbQosPoliceColorStatsExt OBJECT-GROUP
OBJECTS {
cbQosPoliceExdColorExdBitRate,
cbQosPoliceCfmColorCfmBitRate,
cbQosPoliceCfmColorExdBitRate,
cbQosPoliceCfmColorVltBitRate,
cbQosPoliceExdColorVltBitRate,
cbQosPoliceVltColorVltBitRate
}
STATUS current
DESCRIPTION
"Additional objects for police color aware stats on conform
rate, exceed rate, violate rate"
::= { ciscocbQosMIBGroups 77 }
cbQosIPHCCfgExt OBJECT-GROUP
OBJECTS { cbQosIPHCCfgEnabled }
STATUS current
DESCRIPTION
"Additional object to indicate IPHC action configured in policy
class."
::= { ciscocbQosMIBGroups 78 }
cbQosIPHCStatsExt OBJECT-GROUP
OBJECTS {
cbQosIPHCRtpFullHdrSentPktOverflow,
cbQosIPHCRtpFullHdrSentPkt,
cbQosIPHCRtpFullHdrSentPkt64,
cbQosIPHCTcpFullHdrSentPktOverflow,
cbQosIPHCTcpFullHdrSentPkt,
cbQosIPHCTcpFullHdrSentPkt64
}
STATUS current
DESCRIPTION
"Additional objects for IPHC stats."
::= { ciscocbQosMIBGroups 79 }
cbQos421XRCfgExt OBJECT-GROUP
OBJECTS {
cbQosPolicyDiscontinuityTime,
cbQosQueueingCfgBandwidth64,
cbQosQueueingCfgIndividualQSize64,
cbQosPoliceCfgBurstSize64,
cbQosPoliceCfgExtBurstSize64,
cbQosPoliceCfgPir64,
cbQosTSCfgBurstSize64,
cbQosTSCfgExtBurstSize64
}
STATUS current
DESCRIPTION
"The following 4 changes have been made
1. Added 64 bit objects
========================
cbQosQueueingCfgBandwidth64, cbQosQueueingCfgIndividualQSize64,
cbQosPoliceCfgBurstSize64, cbQosPoliceCfgExtBurstSize64,
cbQosPoliceCfgPir64,
cbQosTSCfgBurstSize64, cbQosTSCfgExtBurstSize64
2. Deprecated the objects corresponding to the newly added 64
bit objects
================================================================
cbQosQueueingCfgBandwidth, cbQosQueueingCfgIndividualQSize,
cbQosPoliceCfgBurstSize, cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgPir, cbQosTSCfgBurstSize, cbQosTSCfgExtBurstSize
2. Range expanded for
==================
cbQosQueueingCfgBandwidth, cbQosQueueingCfgIndividualQSize,
cbQosPoliceCfgBurstSize, cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgPir, cbQosTSCfgBurstSize, cbQosTSCfgExtBurstSize,
cbQosREDCfgMinThreshold, cbQosREDCfgMaxThreshold,
cbQosPoliceCfgRate, cbQosPoliceCfgBurstCell,
cbQosPoliceCfgExtBurstCell, cbQosPoliceCfgBurstTime,
cbQosPoliceCfgExtBurstTime, cbQosPoliceCfgCdvt,
cbQosTSCfgRate,cbQosTSCfgBurstTime, cbQosTSCfgExtBurstTime
3. New object added
================
cbQosPolicyDiscontinuityTime
4. Added new type (srp-priority) to
==================================
PoliceAction"
::= { ciscocbQosMIBGroups 80 }
cbQosBitRateExt OBJECT-GROUP
OBJECTS {
cbQosCMPrePolicyBitRate64,
cbQosCMPostPolicyBitRate64,
cbQosCMDropBitRate64,
cbQosPoliceConformedBitRate64,
cbQosPoliceExceededBitRate64,
cbQosPoliceViolatedBitRate64
}
STATUS current
DESCRIPTION
"Added the following 64-bit Bit Rate Objects
cbQosCMPrePolicyBitRate64
cbQosCMPostPolicyBitRate64
cbQosCMDropBitRate64
cbQosPoliceConformedBitRate64
cbQosPoliceExceededBitRate64
cbQosPoliceViolatedBitRate64"
::= { ciscocbQosMIBGroups 81 }
cbQosQueueingStatsGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosQueueingCurrentQDepthPkt,
cbQosQueueingMaxQDepthPkt,
cbQosQueueingTransmitByte64,
cbQosQueueingTransmitPkt64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 82 }
cbQosServicePolicyExtGroupRev2 OBJECT-GROUP
OBJECTS { cbQosParentPolicyIndex }
STATUS current
DESCRIPTION
"Added cbQosParentPolicyIndex to cbQosServicePolicyTable."
::= { ciscocbQosMIBGroups 83 }
END
Reference in New Issue Copy Permalink