mibs/MIBS/cisco/CISCO-CONFIG-MAN-MIB

1008 lines
36 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- Exp $
-- *****************************************************************
-- CISCO-CONFIG-MAN-MIB.my: Configuration Management MIB
--
-- January 2002, A S Kiran Koushik
--
-- Copyright (c) 1995-2004, 2006 by cisco systems, Inc.
--
-- All rights reserved.
--
-- *****************************************************************
-- $Endlog
CISCO-CONFIG-MAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
TimeTicks,
Integer32,
Counter32,
IpAddress,
Gauge32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
DisplayString,
TruthValue,
DateAndTime,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
Unsigned64
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoConfigManMIB MODULE-IDENTITY
LAST-UPDATED "200704270000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"Configuration management MIB.
The MIB represents a model of configuration data that
exists in various locations:
running in use by the running system
terminal saved to whatever is attached as the terminal
local saved locally in NVRAM or flash
remote saved to some server on the network
Although some of the system functions that relate here
can be used for general file storage and transfer, this
MIB intends to include only such operations as clearly
relate to configuration. Its primary emphasis is to
track changes and saves of the running configuration.
As saved data moves further from startup use, such as
into different local flash files or onto the network,
tracking becomes difficult to impossible, so the MIB's
interest and functions are confined in that area.
Information from ccmCLIHistoryCommandTable can be used
to track the exact configuration changes that took
place within a particular Configuration History
event. NMS' can use this information to update
the related components.
For example:
If commands related only to MPLS are entered
then the NMS need to update only the MPLS related
management information rather than updating
all of its management information.
Acronyms and terms:
CLI Command Line Interface."
REVISION "200704270000Z"
DESCRIPTION
"Changes to definition of terminal as an output
location."
REVISION "200608170000Z"
DESCRIPTION
"Added a new group of objects to store the information
related to the Config Change Tracking ID (CTID) feature.
CTID will provide a version number that is unique for
version-incrementing changes to the IOS
running-configuration. It will also provide information
about when CTID last changed.
Added scalars:
* ccmCTID
* ccmCTIDLastChangeTime
* ccmCTIDWhoChanged
* ccmCTIDRolledOverNotifEnable
Added Notification:
* ccmCTIDRolledOver
Added Object Group:
* ciscoConfigManCTIDObjectGroup
Added Notification Group:
* ciscoConfigManCTIDNotifyGroup
Added Compliance:
ciscoConfigManMIBComplianceRev4"
REVISION "200406180000Z"
DESCRIPTION
"The Objects ccmHistoryEventCommandSourceAddress and
ccmHistoryEventServerAddress are deprecated since
they support only IPv4 address. These objects have
been replaced by two new objects
ccmHistoryEventCommandSourceAddrRev1 and
ccmHistoryEventServerAddrRev1. In addition to these
objects two more new objects are defined
ccmHistoryEventCommandSourceAddrType and
ccmHistoryEventServerAddrType"
REVISION "200206070000Z"
DESCRIPTION
"Added new enumerations networkFtp(8) and
networkScp(9) to HistoryEventMedium."
REVISION "200203120000Z"
DESCRIPTION
"Added ccmCLIHistoryCommandTable for
storing the CLI commands that took effect during
a configuration event.
Added scalars ccmCLIHistoryMaxCmdEntries
ccmCLIHistoryCmdEntries and
ccmCLIHistoryCmdEntriesAllowed.
Added ccmHistoryCLICmdEntriesBumped to
ccmHistoryEventTable to store the number of
corresponding bumped entries in the
ccmCLIHistoryCommandTable.
Added the ccmCLIRunningConfigChanged notification.
Added ccmCLICfgRunConfNotifEnable to control the
ccmCLIRunningConfigChanged notification.
Added notification group
ciscoConfigManHistNotifyGroup.
Updated the MIB description to indicate the use of
the above additions."
REVISION "9511280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 43 }
ciscoConfigManMIBObjects OBJECT IDENTIFIER
::= { ciscoConfigManMIB 1 }
ccmHistory OBJECT IDENTIFIER
::= { ciscoConfigManMIBObjects 1 }
ccmCLIHistory OBJECT IDENTIFIER
::= { ciscoConfigManMIBObjects 2 }
ccmCLICfg OBJECT IDENTIFIER
::= { ciscoConfigManMIBObjects 3 }
ccmCTIDObjects OBJECT IDENTIFIER
::= { ciscoConfigManMIBObjects 4 }
-- Textual Conventions
HistoryEventMedium ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The source or destination of a configuration change,
save, or copy.
erase erasing destination (source only)
running live operational data
commandSource the command source itself
startup what the system will use next reboot
local local NVRAM or flash
networkTftp network host via Trivial File Transfer
networkRcp network host via Remote Copy
networkFtp network host via File transfer
networkScp network host via Secure Copy
"
SYNTAX INTEGER {
erase(1),
commandSource(2),
running(3),
startup(4),
local(5),
networkTftp(6),
networkRcp(7),
networkFtp(8),
networkScp(9)
}
-- Configuration History
ccmHistoryRunningLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the running configuration
was last changed.
If the value of ccmHistoryRunningLastChanged is
greater than ccmHistoryRunningLastSaved, the
configuration has been changed but not saved."
::= { ccmHistory 1 }
ccmHistoryRunningLastSaved OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the running configuration
was last saved (written).
If the value of ccmHistoryRunningLastChanged is
greater than ccmHistoryRunningLastSaved, the
configuration has been changed but not saved.
What constitutes a safe saving of the running
configuration is a management policy issue beyond the
scope of this MIB. For some installations, writing the
running configuration to a terminal may be a way of
capturing and saving it. Others may use local or
remote storage. Thus ANY write is considered saving
for the purposes of the MIB."
::= { ccmHistory 2 }
ccmHistoryStartupLastChanged OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the startup configuration
was last written to. In general this is the
default configuration used when cold starting the
system. It may have been changed by a save of the
running configuration or by a copy from elsewhere."
::= { ccmHistory 3 }
ccmHistoryMaxEventEntries OBJECT-TYPE
SYNTAX Integer32 (0..2147483647 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries that can be held in
ccmHistoryEventTable.
The recommended value for implementations is 10."
::= { ccmHistory 4 }
ccmHistoryEventEntriesBumped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the oldest entry in
ccmHistoryEventTable was deleted to make room
for a new entry."
::= { ccmHistory 5 }
ccmHistoryEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmHistoryEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of configuration events on this router."
::= { ccmHistory 6 }
ccmHistoryEventEntry OBJECT-TYPE
SYNTAX CcmHistoryEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a configuration event on this
router."
INDEX { ccmHistoryEventIndex }
::= { ccmHistoryEventTable 1 }
CcmHistoryEventEntry ::= SEQUENCE {
ccmHistoryEventIndex Integer32,
ccmHistoryEventTime TimeTicks,
ccmHistoryEventCommandSource INTEGER ,
ccmHistoryEventConfigSource HistoryEventMedium,
ccmHistoryEventConfigDestination HistoryEventMedium,
ccmHistoryEventTerminalType INTEGER ,
ccmHistoryEventTerminalNumber Integer32,
ccmHistoryEventTerminalUser DisplayString,
ccmHistoryEventTerminalLocation DisplayString,
ccmHistoryEventCommandSourceAddress IpAddress,
ccmHistoryEventVirtualHostName DisplayString,
ccmHistoryEventServerAddress IpAddress,
ccmHistoryEventFile DisplayString,
ccmHistoryEventRcpUser DisplayString,
ccmHistoryCLICmdEntriesBumped Counter32,
ccmHistoryEventCommandSourceAddrType InetAddressType,
ccmHistoryEventCommandSourceAddrRev1 InetAddress,
ccmHistoryEventServerAddrType InetAddressType,
ccmHistoryEventServerAddrRev1 InetAddress
}
ccmHistoryEventIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A monotonically increasing integer for the sole
purpose of indexing events. When it reaches the
maximum value, an extremely unlikely event, the agent
wraps the value back to 1 and may flush existing
entries."
::= { ccmHistoryEventEntry 1 }
ccmHistoryEventTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of sysUpTime when the event occurred."
::= { ccmHistoryEventEntry 2 }
ccmHistoryEventCommandSource OBJECT-TYPE
SYNTAX INTEGER {
commandLine(1),
snmp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source of the command that instigated the event."
::= { ccmHistoryEventEntry 3 }
ccmHistoryEventConfigSource OBJECT-TYPE
SYNTAX HistoryEventMedium
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The configuration data source for the event."
::= { ccmHistoryEventEntry 4 }
ccmHistoryEventConfigDestination OBJECT-TYPE
SYNTAX HistoryEventMedium
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The configuration data destination for the event."
::= { ccmHistoryEventEntry 5 }
ccmHistoryEventTerminalType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
unknown(2),
console(3),
terminal(4),
virtual(5),
auxiliary(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventCommandSource is 'commandLine',
the terminal type, otherwise 'notApplicable'."
::= { ccmHistoryEventEntry 6 }
ccmHistoryEventTerminalNumber OBJECT-TYPE
SYNTAX Integer32 (-2147483648..2147483647 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventCommandSource is 'commandLine',
the terminal number. The value is -1 if not available
or not applicable."
::= { ccmHistoryEventEntry 7 }
ccmHistoryEventTerminalUser OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventCommandSource is 'commandLine',
the name of the logged in user. The length is zero if
not available or not applicable."
::= { ccmHistoryEventEntry 8 }
ccmHistoryEventTerminalLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventCommandSource is 'commandLine',
the hard-wired location of the terminal or the remote
host for an incoming connection. The length is zero
if not available or not applicable."
::= { ccmHistoryEventEntry 9 }
ccmHistoryEventCommandSourceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"If ccmHistoryEventTerminalType is 'virtual', the
internet address of the connected system.
If ccmHistoryEventCommandSource is 'snmp', the internet
address of the requester.
The value is 0.0.0.0 if not available or not
applicable.
This object is deprecated by
ccmHistoryEventCommandSourceAddrRev1"
::= { ccmHistoryEventEntry 10 }
ccmHistoryEventVirtualHostName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventTerminalType is 'virtual', the host
name of the connected system. The length is zero if
not available or not applicable."
::= { ccmHistoryEventEntry 11 }
ccmHistoryEventServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"If ccmHistoryEventConfigSource or
ccmHistoryEventConfigDestination is 'networkTftp' or
'networkRcp', the internet address of the storage file
server. The value is 0.0.0.0 if not applicable or not
available.
This object is deprecated by
ccmHistoryEventServerAddrRev1"
::= { ccmHistoryEventEntry 12 }
ccmHistoryEventFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventConfigSource or
ccmHistoryEventConfigDestination is 'networkTftp' or
'networkRcp', the configuration file name at the
storage file server. The length is zero if not
available or not applicable."
::= { ccmHistoryEventEntry 13 }
ccmHistoryEventRcpUser OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventConfigSource or
ccmHistoryEventConfigDestination is 'networkRcp', the
remote user name. The length is zero if not applicable
or not available."
::= { ccmHistoryEventEntry 14 }
ccmHistoryCLICmdEntriesBumped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the oldest entry in
ccmCLIHistoryCommandTable with first index as
ccmHistoryEventIndex was deleted to make
room for a new entry.
This object is applicable only if
ccmHistoryEventCommandSource has a value
of 'commandLine'."
::= { ccmHistoryEventEntry 15 }
ccmHistoryEventCommandSourceAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the transport type of the
address contained in
ccmHistoryEventCommandSourceAddrRev1.
The value will be zero if not available or not
applicable."
::= { ccmHistoryEventEntry 16 }
ccmHistoryEventCommandSourceAddrRev1 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventTerminalType is 'virtual', the
internet address of the connected system.
If ccmHistoryEventCommandSource is 'snmp', the
internet address of the requester.
The value of all bit's is zero if not available or
not applicable.
The Format of this address depends on the value of the
ccmHistoryEventCommandSourceAddrType object.
This object deprecates
ccmHistoryEventCommandSourceAddress"
::= { ccmHistoryEventEntry 17 }
ccmHistoryEventServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the transport type of the
address contained in ccmHistoryEventServerAddrRev1.
The value will be zero if not available or not
aplicable."
::= { ccmHistoryEventEntry 18 }
ccmHistoryEventServerAddrRev1 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If ccmHistoryEventConfigSource or
ccmHistoryEventConfigDestination is 'networkTftp' or
'networkRcp', the internet address of the storage file
server.
The value of all bits is 0s if not applicable or not
available.
The Format of this address depends on the value of the
ccmHistoryEventServerAddrType object.
This object deprecates ccmHistoryEventServerAddress."
::= { ccmHistoryEventEntry 19 }
-- ccmCLIHistory
ccmCLIHistoryMaxCmdEntries OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of entries that can be held in
ccmCLIHistoryCommandTable.
The recommended value for implementations is 100.
If the number of entries in ccmCLIHistoryCommandTable
exceeds the value of this object, old entries will be
bumped to make room for new entries.
The ccmCLIHistoryCommandTable will not be populated
if the value of this object is 0."
::= { ccmCLIHistory 1 }
ccmCLIHistoryCmdEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of entries in
ccmCLIHistoryCommandTable."
::= { ccmCLIHistory 2 }
ccmCLIHistoryCmdEntriesAllowed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the upper limit on the
number of entries allowed in
ccmCLIHistoryCommandTable by the managed system."
::= { ccmCLIHistory 3 }
ccmCLIHistoryCommandTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcmCLIHistoryCommandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of CLI commands that took effect during
configuration events."
::= { ccmCLIHistory 4 }
ccmCLIHistoryCommandEntry OBJECT-TYPE
SYNTAX CcmCLIHistoryCommandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the CLI commands that took effect
during the configuration event pointed by
ccmCLIHistoryEventIndex.
A set of rows in this table having the first
index as ccmHistoryEventIndex will store the
CLI commands entered during the corresponding
configuration event in ccmHistoryEventTable.
An entry will be created in this table only if
the corresponding entry in ccmHistoryEventTable has
a value of 'commandLine' for
ccmHistoryEventCommandSource."
INDEX {
ccmHistoryEventIndex,
ccmCLIHistoryCommandIndex
}
::= { ccmCLIHistoryCommandTable 1 }
CcmCLIHistoryCommandEntry ::= SEQUENCE {
ccmCLIHistoryCommandIndex Unsigned32,
ccmCLIHistoryCommand DisplayString
}
ccmCLIHistoryCommandIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A monotonically increasing integer for the
purpose of indexing CLI commands which took effect
during a configuration event."
::= { ccmCLIHistoryCommandEntry 1 }
ccmCLIHistoryCommand OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CLI command entered which took effect
during the configuration event pointed by
ccmHistoryEventIndex."
::= { ccmCLIHistoryCommandEntry 2 }
ccmCLICfgRunConfNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces
the ccmCLIRunningConfigChanged notification. A false
value will prevent notifications from being generated
by this system."
DEFVAL { false }
::= { ccmCLICfg 1 }
ccmCTID OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the Config Change Tracking ID which
uniquely represents version-incrementing changes to the IOS
running configuration."
::= { ccmCTIDObjects 1 }
ccmCTIDLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time when the Config Change Tracking
ID last changed."
::= { ccmCTIDObjects 2 }
ccmCTIDWhoChanged OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the user who last reset the Config Change
Tracking ID."
::= { ccmCTIDObjects 3 }
ccmCTIDRolledOverNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces the
ccmCTIDRolledOver notification. A false value will prevent
notifications from being generated by this system."
DEFVAL { false }
::= { ccmCTIDObjects 4 }
-- Notifications
ciscoConfigManMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoConfigManMIB 2 }
ciscoConfigManMIBNotifications OBJECT IDENTIFIER
::= { ciscoConfigManMIBNotificationPrefix 0 }
ciscoConfigManEvent NOTIFICATION-TYPE
OBJECTS {
ccmHistoryEventCommandSource,
ccmHistoryEventConfigSource,
ccmHistoryEventConfigDestination
}
STATUS current
DESCRIPTION
"Notification of a configuration management event as
recorded in ccmHistoryEventTable."
::= { ciscoConfigManMIBNotifications 1 }
ccmCLIRunningConfigChanged NOTIFICATION-TYPE
OBJECTS {
ccmHistoryRunningLastChanged,
ccmHistoryEventTerminalType
}
STATUS current
DESCRIPTION
"This notification indicates that the running
configuration of the managed system has changed
from the CLI.
If the managed system supports a separate
configuration mode(where the configuration commands
are entered under a configuration session which
affects the running configuration of the system),
then this notification is sent when the configuration
mode is exited.
During this configuration session there can be
one or more running configuration changes."
::= { ciscoConfigManMIBNotifications 2 }
ccmCTIDRolledOver NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the Config Change Tracking
ID has rolled over and will be reset."
::= { ciscoConfigManMIBNotifications 3 }
-- Conformance
ciscoConfigManMIBConformance OBJECT IDENTIFIER
::= { ciscoConfigManMIB 3 }
ciscoConfigManMIBCompliances OBJECT IDENTIFIER
::= { ciscoConfigManMIBConformance 1 }
ciscoConfigManMIBGroups OBJECT IDENTIFIER
::= { ciscoConfigManMIBConformance 2 }
-- Compliance
ciscoConfigManMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Configuration Management MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoConfigManHistoryGroup }
::= { ciscoConfigManMIBCompliances 1 }
ciscoConfigManMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Configuration Management MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoConfigManHistoryGroupRev1 }
GROUP ciscoConfigManCLIHistCmdGroup
DESCRIPTION
"This Optional group contains information about
the CLI commands entered during a particular
configuration event. Implementation of this
group is mandatory if the system can be
configured via CLI."
GROUP ciscoConfigManHistNotifyGroup
DESCRIPTION
"This optional group contains the
notifications which represent various
configuration events on the system.
Implementation of this group is mandatory
if the system can be configured via CLI."
::= { ciscoConfigManMIBCompliances 2 }
ciscoConfigManMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Configuration Management MIB.
This compliance module deprecates
ciscoConfigManMIBCompliance."
MODULE -- this module
MANDATORY-GROUPS { ciscoConfigManHistoryGroupRev2 }
GROUP ciscoConfigManCLIHistCmdGroup
DESCRIPTION
"This Optional group contains information about
the CLI commands entered during a particular
configuration event. Implementation of this
group is mandatory if the system can be
configured via CLI."
GROUP ciscoConfigManHistNotifyGroup
DESCRIPTION
"This optional group contains the
notifications which represent various
configuration events on the system.
Implementation of this group is mandatory
if the system can be configured via CLI."
::= { ciscoConfigManMIBCompliances 3 }
ciscoConfigManMIBComplianceRev4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco Configuration Management MIB.
This compliance module deprecates
ciscoConfigManMIBCompliance."
MODULE -- this module
MANDATORY-GROUPS { ciscoConfigManHistoryGroupRev2 }
GROUP ciscoConfigManCLIHistCmdGroup
DESCRIPTION
"This Optional group contains information about
the CLI commands entered during a particular
configuration event. Implementation of this
group is mandatory if the system can be
configured via CLI."
GROUP ciscoConfigManHistNotifyGroup
DESCRIPTION
"This optional group contains the
notifications which represent various
configuration events on the system.
Implementation of this group is mandatory
if the system can be configured via CLI."
GROUP ciscoConfigManCTIDNotifyGroup
DESCRIPTION
"This optional group contains the
notifications which represent the various
Config Change Tracking ID events on the system."
GROUP ciscoConfigManCTIDObjectGroup
DESCRIPTION
"This optional group contains objects that expose
Config Change Tracking ID and the associated
information. This group is mandatory when the
device implements the Config Change Tracking ID
feature."
::= { ciscoConfigManMIBCompliances 4 }
-- Units of Conformance
ciscoConfigManHistoryGroup OBJECT-GROUP
OBJECTS {
ccmHistoryRunningLastChanged,
ccmHistoryRunningLastSaved,
ccmHistoryStartupLastChanged,
ccmHistoryMaxEventEntries,
ccmHistoryEventEntriesBumped,
ccmHistoryEventTime,
ccmHistoryEventCommandSource,
ccmHistoryEventConfigSource,
ccmHistoryEventConfigDestination,
ccmHistoryEventTerminalType,
ccmHistoryEventTerminalNumber,
ccmHistoryEventTerminalUser,
ccmHistoryEventTerminalLocation,
ccmHistoryEventCommandSourceAddress,
ccmHistoryEventVirtualHostName,
ccmHistoryEventServerAddress,
ccmHistoryEventFile,
ccmHistoryEventRcpUser
}
STATUS deprecated
DESCRIPTION "Configuration history."
::= { ciscoConfigManMIBGroups 1 }
ciscoConfigManHistoryGroupRev1 OBJECT-GROUP
OBJECTS {
ccmHistoryRunningLastChanged,
ccmHistoryRunningLastSaved,
ccmHistoryStartupLastChanged,
ccmHistoryMaxEventEntries,
ccmHistoryEventEntriesBumped,
ccmHistoryEventTime,
ccmHistoryEventCommandSource,
ccmHistoryEventConfigSource,
ccmHistoryEventConfigDestination,
ccmHistoryEventTerminalType,
ccmHistoryEventTerminalNumber,
ccmHistoryEventTerminalUser,
ccmHistoryEventTerminalLocation,
ccmHistoryEventCommandSourceAddress,
ccmHistoryEventVirtualHostName,
ccmHistoryEventServerAddress,
ccmHistoryEventFile,
ccmHistoryEventRcpUser,
ccmHistoryCLICmdEntriesBumped
}
STATUS deprecated
DESCRIPTION "Configuration history."
::= { ciscoConfigManMIBGroups 2 }
ciscoConfigManHistNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoConfigManEvent,
ccmCLIRunningConfigChanged
}
STATUS current
DESCRIPTION
"Notifications of a configuration management event."
::= { ciscoConfigManMIBGroups 3 }
ciscoConfigManHistoryGroupRev2 OBJECT-GROUP
OBJECTS {
ccmHistoryRunningLastChanged,
ccmHistoryRunningLastSaved,
ccmHistoryStartupLastChanged,
ccmHistoryMaxEventEntries,
ccmHistoryEventEntriesBumped,
ccmHistoryEventTime,
ccmHistoryEventCommandSource,
ccmHistoryEventConfigSource,
ccmHistoryEventConfigDestination,
ccmHistoryEventTerminalType,
ccmHistoryEventTerminalNumber,
ccmHistoryEventTerminalUser,
ccmHistoryEventTerminalLocation,
ccmHistoryEventVirtualHostName,
ccmHistoryEventFile,
ccmHistoryEventRcpUser,
ccmHistoryCLICmdEntriesBumped,
ccmHistoryEventCommandSourceAddrType,
ccmHistoryEventCommandSourceAddrRev1,
ccmHistoryEventServerAddrType,
ccmHistoryEventServerAddrRev1
}
STATUS current
DESCRIPTION
"Configuration history.
This group deprecates the old group
ciscoConfigManHistoryGroupRev1"
::= { ciscoConfigManMIBGroups 5 }
ciscoConfigManCLIHistCmdGroup OBJECT-GROUP
OBJECTS {
ccmCLIHistoryMaxCmdEntries,
ccmCLIHistoryCmdEntries,
ccmCLIHistoryCmdEntriesAllowed,
ccmCLIHistoryCommand,
ccmCLICfgRunConfNotifEnable
}
STATUS current
DESCRIPTION
"CLI commands entered during a configuration history
event."
::= { ciscoConfigManMIBGroups 4 }
ciscoConfigManCTIDNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { ccmCTIDRolledOver }
STATUS current
DESCRIPTION
"Notifications of a Config Change Tracking ID event."
::= { ciscoConfigManMIBGroups 6 }
ciscoConfigManCTIDObjectGroup OBJECT-GROUP
OBJECTS {
ccmCTID,
ccmCTIDLastChangeTime,
ccmCTIDWhoChanged,
ccmCTIDRolledOverNotifEnable
}
STATUS current
DESCRIPTION
"Information about the current CTID value, when CTID last
changed, and who last changed the CTID."
::= { ciscoConfigManMIBGroups 7 }
END