david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-CONTEXT-MAPPING-MIB

854 lines
29 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-CONTEXT-MAPPING-MIB.my: Cisco Context Mapping MIB
--
-- January 2005, Chinna Pellacuru.
--
-- May 2008, Sheethal Gunjal.
--
-- Copyright (c) 2004-2005, 2008 by cisco Systems Inc.
-- All rights reserved.
--
-- ****************************************************************
CISCO-CONTEXT-MAPPING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
RowStatus,
StorageType
FROM SNMPv2-TC
CiscoBridgeDomain
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoContextMappingMIB MODULE-IDENTITY
LAST-UPDATED "200811220000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"A single SNMP agent sometimes needs to support multiple
instances of the same MIB module, and does so through the
use of multiple SNMP contexts. This typically occurs because
the technology has evolved to have extra dimension(s), i.e.,
one or more extra data and/or identifier values which are
different in the different contexts, but were not defined in
INDEX clause(s) of the original MIB module. In such cases,
network management applications need to know the specific
data/identifier values in each context, and this MIB module
provides mapping tables which contain that information.
Within a network there can be multiple Virtual Private
Networks (VPNs) configured using Virtual Routing and
Forwarding Instances (VRFs). Within a VPN there can be
multiple topologies when Multi-topology Routing (MTR) is
used. Also, Interior Gateway Protocols (IGPs) can have
multiple protocol instances running on the device.
A network can have multiple broadcast domains configured
using Bridge Domain Identifiers.
With MTR routing, VRFs, and Bridge domains, a router now
needs to support multiple instances of several existing
MIB modules, and this can be achieved if the router's SNMP
agent provides access to each instance of the same MIB module
via a different SNMP context (see Section 3.1.1 of RFC 3411).
For MTR routing, VRFs, and Bridge domains, a different SNMP
context is needed depending on one or more of the following:
the VRF, the topology-identifier, the routing protocol instance,
and the bridge domain identifier.
In other words, the router's management information can be
accessed through multiple SNMP contexts where each such
context represents a specific VRF, a specific
topology-identifier, a specific routing protocol instance
and/or a bridge domain identifier. This MIB module provides
a mapping of each such SNMP context to the corresponding VRF,
the corresponding topology, the corresponding routing protocol
instance, and the corresponding bridge domain identifier.
Some SNMP contexts are independent of VRFs, independent of
a topology, independent of a routing protocol instance, or
independent of a bridge domain and in such a case, the mapping
is to the zero length string.
With the Cisco package licensing strategy, the features
available in the image are grouped into multiple packages
and each packages can be managed to operate at different
feature levels based on the available license. This MIB
module provides option to associate an SNMP context to a
feature package group. This will allow manageability of
license MIB objects specific to a feature package group.
As technology evolves more we may need additional
identifiers to identify the context. Then we would need
to add those additional identifiers into the mapping."
REVISION "200811220000Z"
DESCRIPTION
"Added New Table cContextMappingLicenseGroupTable
to provide SNMP Context support for license package groups.
Added cContextMappingLicenseGroupDataGroup in OBJECT-GROUP
Added cContextMappingMIBComplianceRev2 in MODULE-COMPLIANCE
Updated the MIB description to indicate the use of
the above additions"
REVISION "200805300000Z"
DESCRIPTION
"Add cContextMappingBridgeInstanceTable.
Added cContextMappingBridgeInstanceDataGroup.
Deprecated cContextMappingMIBComplianceRev1 and added
cContextMappingMIBComplianceRev2 compliance statement."
REVISION "200802010000Z"
DESCRIPTION
"Added New Table cContextMappingBridgeDomainTable
to provide SNMP context support to the Bridge Domain.
Added cContextMappingBridgeDomainDataGroup in OBJECT-GROUP
Added cContextMappingMIBComplianceRev1 in MODULE-COMPLIANCE"
REVISION "200503170000Z"
DESCRIPTION
"Initial version of the MIB module."
::= { ciscoMgmt 468 }
cContextMappingMIBObjects OBJECT IDENTIFIER
::= { ciscoContextMappingMIB 1 }
cContextMappingMIBConformance OBJECT IDENTIFIER
::= { ciscoContextMappingMIB 2 }
cContextMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CContextMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on which
cContextMappingVacmContextName is mapped to
which VRF, topology, and routing protocol instance.
This table is indexed by SNMP VACM context.
Configuring a row in this table for an SNMP context
does not require that the context be already defined,
i.e., a row can be created in this table for a context
before the corresponding row is created in RFC 3415's
vacmContextTable.
To create a row in this table, a manager must set
cContextMappingRowStatus to either 'createAndGo' or
'createAndWait'.
To delete a row in this table, a manager must set
cContextMappingRowStatus to 'destroy'."
::= { cContextMappingMIBObjects 1 }
cContextMappingEntry OBJECT-TYPE
SYNTAX CContextMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information relating to a single mapping of
cContextMappingVacmContextName to the corresponding VRF,
the corresponding topology, and the corresponding routing
protocol instance."
INDEX { cContextMappingVacmContextName }
::= { cContextMappingTable 1 }
CContextMappingEntry ::= SEQUENCE {
cContextMappingVacmContextName SnmpAdminString,
cContextMappingVrfName SnmpAdminString,
cContextMappingTopologyName SnmpAdminString,
cContextMappingProtoInstName SnmpAdminString,
cContextMappingStorageType StorageType,
cContextMappingRowStatus RowStatus
}
cContextMappingVacmContextName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vacmContextName given to the SNMP context.
This is a human readable name identifying a particular
SNMP VACM context at a particular SNMP entity.
The empty contextName (zero length) represents the
default context."
::= { cContextMappingEntry 1 }
cContextMappingVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an instance of this object identifies
the name given to the VRF to which the SNMP context
is mapped to.
This is typically a human-readable string. This is
the same ASCII string used in the router's console
interface to refer to this VRF.
When the value of this object is the zero length
string it indicates that the SNMP context is independent
of any VRF."
DEFVAL { ''H }
::= { cContextMappingEntry 2 }
cContextMappingTopologyName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an instance of this object identifies
the name given to the topology to which the SNMP
context is mapped to.
This is typically a human-readable string. This is
the same ASCII string used in the router's console
interface to refer to this topology.
When the value of this object is the zero length
string it indicates that the SNMP context is independent
of any topology."
DEFVAL { ''H }
::= { cContextMappingEntry 3 }
cContextMappingProtoInstName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an instance of this object identifies
the name given to the protocol instance to which the
SNMP context is mapped to.
This is typically a human-readable string. This is
the same ASCII string used in the router's console
interface to refer to this protocol instance.
When the value of this object is the zero length
string it indicates that the SNMP context is independent
of any protocol instance."
DEFVAL { ''H }
::= { cContextMappingEntry 4 }
cContextMappingStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { cContextMappingEntry 5 }
cContextMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object facilitates the creation, modification, or
deletion of a conceptual row in this table."
::= { cContextMappingEntry 6 }
cContextMappingBridgeDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF CContextMappingBridgeDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on which
cContextMappingVacmContextName is mapped to
which bridge domain.
A Bridge Domain is one of the means by which it is possible
to define an Ethernet broadcast domain on a bridging device.
A network can have multiple broadcast domains configured.
This table helps the network management personnel to find
out the details of various broadcast domains configured
in the network.
An entry need to exist in cContextMappingTable, to create
an entry in this table."
::= { cContextMappingMIBObjects 2 }
cContextMappingBridgeDomainEntry OBJECT-TYPE
SYNTAX CContextMappingBridgeDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information relating to a single mapping of
cContextMappingVacmContextName to the
corresponding bridge domain.
To create a row in this table, a manager must set
cContextMappingBridgeDomainRowStatus to either
'createAndGo' or 'createAndWait'.
To delete a row in this table, a manager must set
cContextMappingBridgeDomainRowStatus to 'destroy'."
INDEX { cContextMappingVacmContextName }
::= { cContextMappingBridgeDomainTable 1 }
CContextMappingBridgeDomainEntry ::= SEQUENCE {
cContextMappingBridgeDomainIdentifier CiscoBridgeDomain,
cContextMappingBridgeDomainStorageType StorageType,
cContextMappingBridgeDomainRowStatus RowStatus
}
cContextMappingBridgeDomainIdentifier OBJECT-TYPE
SYNTAX CiscoBridgeDomain
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an instance of this object identifies
the bridge domain to which the SNMP context is
mapped to."
REFERENCE "CISCO-BRIDGE-DOMAIN-MIB"
::= { cContextMappingBridgeDomainEntry 1 }
cContextMappingBridgeDomainStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { cContextMappingBridgeDomainEntry 2 }
cContextMappingBridgeDomainRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object facilitates the creation, modification, or
deletion of a conceptual row in this table."
::= { cContextMappingBridgeDomainEntry 3 }
cContextMappingBridgeInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CContextMappingBridgeInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on mapping between
cContextMappingVacmContextName and bridge instance.
Bridge instance is an instance of a physical or logical
bridge which has unique bridge-id.
If an entry is deleted from cContextMappingTable, the
corresponding entry in this table will also get deleted.
If an entry needs to be created in this table, the
corresponding entry must exist in cContextMappingTable."
REFERENCE "BRIDGE-MIB"
::= { cContextMappingMIBObjects 3 }
cContextMappingBridgeInstanceEntry OBJECT-TYPE
SYNTAX CContextMappingBridgeInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information relating to a single mapping of
cContextMappingVacmContextName to the
corresponding bridge instance.
To create a row in this table, a manager must set
cContextMappingBridgeInstRowStatus to either
'createAndGo' or 'createAndWait'.
To delete a row in this table, a manager must set
cContextMappingBridgeInstRowStatus to 'destroy'."
INDEX { cContextMappingVacmContextName }
::= { cContextMappingBridgeInstanceTable 1 }
CContextMappingBridgeInstanceEntry ::= SEQUENCE {
cContextMappingBridgeInstName SnmpAdminString,
cContextMappingBridgeInstStorageType StorageType,
cContextMappingBridgeInstRowStatus RowStatus
}
cContextMappingBridgeInstName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object identifies the name given to bridge
instance to which the SNMP context is mapped to.
Value of this object cannot be changed when the
RowStatus object in the same row is 'active'.
This is typically a human-readable string. This is
the same ASCII string used in the router's console
interface to refer to this bridge instance.
When the value of this object is a zero length
string, it indicates that the SNMP context is
independent of any bridge instances."
::= { cContextMappingBridgeInstanceEntry 1 }
cContextMappingBridgeInstStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Value of this object cannot be changed when the
RowStatus object in the same row is 'active'.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { cContextMappingBridgeInstanceEntry 2 }
cContextMappingBridgeInstRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object facilitates the creation, modification, or
deletion of a conceptual row in this table."
::= { cContextMappingBridgeInstanceEntry 3 }
cContextMappingLicenseGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CContextMappingLicenseGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information on which
cContextMappingVacmContextName is mapped to
which License Group.
Group level licensing is used where each
Technology Package is enabled via a License."
::= { cContextMappingMIBObjects 4 }
cContextMappingLicenseGroupEntry OBJECT-TYPE
SYNTAX CContextMappingLicenseGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information relating to a single mapping of
CContextMappingVacmContextName to the
corresponding License Group."
INDEX { cContextMappingVacmContextName }
::= { cContextMappingLicenseGroupTable 1 }
CContextMappingLicenseGroupEntry ::= SEQUENCE {
cContextMappingLicenseGroupName SnmpAdminString,
cContextMappingLicenseGroupStorageType StorageType,
cContextMappingLicenseGroupRowStatus RowStatus
}
cContextMappingLicenseGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of an instance of this object identifies
the name given to the Group to which the SNMP context
is mapped.
Feature sets from all groups will be combined to form
universal image. User can configure multiple groups as needed.
For example: In Next generation ISRs will use
the universal image package level licensing model
for its licensing need. Each group has
the feature set needed for that specific technology.
Feature sets from different groups are combined to
form universal image and each feature set for a group
can be enabled using a valid license key. There will
be a base level ipbase package in which the router
boots with out any license key.
The following are the different Technology Groups.
1.crypto
2.data
3.ip
4.legacy
5.novpn-security
6.security
7.uc"
::= { cContextMappingLicenseGroupEntry 1 }
cContextMappingLicenseGroupStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row."
DEFVAL { nonVolatile }
::= { cContextMappingLicenseGroupEntry 2 }
cContextMappingLicenseGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object facilitates the creation, modification, or
deletion of a conceptual row in this table."
::= { cContextMappingLicenseGroupEntry 3 }
-- Conformance
cContextMappingMIBCompliances OBJECT IDENTIFIER
::= { cContextMappingMIBConformance 1 }
cContextMappingMIBGroups OBJECT IDENTIFIER
::= { cContextMappingMIBConformance 2 }
-- Compliance
cContextMappingMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-CONTEXT-MAPPING-MIB."
MODULE -- this module
MANDATORY-GROUPS { cContextMappingDataGroup }
OBJECT cContextMappingVrfName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingTopologyName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingProtoInstName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingTable is not required."
::= { cContextMappingMIBCompliances 1 }
cContextMappingMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-CONTEXT-MAPPING-MIB. This compliance statement
is superceded by cContextMappingMIBComplianceRev2."
MODULE -- this module
MANDATORY-GROUPS {
cContextMappingDataGroup,
cContextMappingBridgeDomainDataGroup
}
OBJECT cContextMappingVrfName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingTopologyName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingProtoInstName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingTable is not required."
OBJECT cContextMappingBridgeDomainIdentifier
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeDomainStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeDomainRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingTable is not required."
::= { cContextMappingMIBCompliances 2 }
cContextMappingMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-CONTEXT-MAPPING-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cContextMappingDataGroup,
cContextMappingBridgeDomainDataGroup,
cContextMappingBridgeInstanceDataGroup
}
OBJECT cContextMappingVrfName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingTopologyName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingProtoInstName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingTable is not required."
OBJECT cContextMappingBridgeDomainIdentifier
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeDomainStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeDomainRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingBridgeDomainTable is not required."
OBJECT cContextMappingBridgeInstName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeInstStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeInstRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingBridgeInstanceTable is not required."
::= { cContextMappingMIBCompliances 3 }
cContextMappingMIBComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-CONTEXT-MAPPING-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cContextMappingDataGroup,
cContextMappingBridgeDomainDataGroup,
cContextMappingBridgeInstanceDataGroup,
cContextMappingLicenseGroupDataGroup
}
OBJECT cContextMappingVrfName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingTopologyName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingProtoInstName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingTable is not required."
OBJECT cContextMappingBridgeDomainIdentifier
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeDomainStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeDomainRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingBridgeDomainTable is not required."
OBJECT cContextMappingBridgeInstName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeInstStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingBridgeInstRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingBridgeInstanceTable is not required."
OBJECT cContextMappingLicenseGroupName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingLicenseGroupStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cContextMappingLicenseGroupRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Create/delete/modify access to the
cContextMappingTable is not required."
::= { cContextMappingMIBCompliances 4 }
-- Units of Conformance
cContextMappingDataGroup OBJECT-GROUP
OBJECTS {
cContextMappingVrfName,
cContextMappingTopologyName,
cContextMappingProtoInstName,
cContextMappingStorageType,
cContextMappingRowStatus
}
STATUS current
DESCRIPTION
"The collection of objects providing the context
mapping data between the SNMP context to the
corresponding VRF, the corresponding topology,
and the corresponding routing protocol instance."
::= { cContextMappingMIBGroups 1 }
cContextMappingBridgeDomainDataGroup OBJECT-GROUP
OBJECTS {
cContextMappingBridgeDomainIdentifier,
cContextMappingBridgeDomainStorageType,
cContextMappingBridgeDomainRowStatus
}
STATUS current
DESCRIPTION
"The collection of objects providing the context
mapping data between the SNMP context to the
corresponding bridge domain."
::= { cContextMappingMIBGroups 2 }
cContextMappingBridgeInstanceDataGroup OBJECT-GROUP
OBJECTS {
cContextMappingBridgeInstName,
cContextMappingBridgeInstStorageType,
cContextMappingBridgeInstRowStatus
}
STATUS current
DESCRIPTION
"The collection of objects providing the context
mapping data between the SNMP context to the
corresponding bridge instance."
::= { cContextMappingMIBGroups 3 }
cContextMappingLicenseGroupDataGroup OBJECT-GROUP
OBJECTS {
cContextMappingLicenseGroupName,
cContextMappingLicenseGroupStorageType,
cContextMappingLicenseGroupStorageType,
cContextMappingLicenseGroupRowStatus
}
STATUS current
DESCRIPTION
"The collection of objects providing the context
mapping data between the SNMP context to the
corresponding LicenseGroupName."
::= { cContextMappingMIBGroups 4 }
END
Reference in New Issue Copy Permalink