1760 lines
69 KiB
Plaintext
1760 lines
69 KiB
Plaintext
|
-- *******************************************************************
|
||
|
|
-- CISCO-DOT11-ASSOCIATION-MIB.my:
|
||
|
|
-- CISCO DOT11 ASSOCIATION MIB file
|
||
|
|
--
|
||
|
|
-- April 2002, Francis Pang
|
||
|
|
--
|
||
|
|
-- Copyright (c) 2002-2007 by Cisco Systems, Inc.
|
||
|
|
-- All rights reserved.
|
||
|
|
-- *******************************************************************
|
||
|
|
--
|
||
|
|
CISCO-DOT11-ASSOCIATION-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE,
|
||
|
|
Gauge32,
|
||
|
|
Counter32,
|
||
|
|
Integer32,
|
||
|
|
Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
MODULE-COMPLIANCE,
|
||
|
|
OBJECT-GROUP
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
TEXTUAL-CONVENTION,
|
||
|
|
MacAddress,
|
||
|
|
TruthValue
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
ifIndex,
|
||
|
|
InterfaceIndex
|
||
|
|
FROM IF-MIB
|
||
|
|
InetAddressType,
|
||
|
|
InetAddress
|
||
|
|
FROM INET-ADDRESS-MIB
|
||
|
|
SnmpAdminString
|
||
|
|
FROM SNMP-FRAMEWORK-MIB
|
||
|
|
cd11IfAuxSsid,
|
||
|
|
CDot11IfVlanIdOrZero,
|
||
|
|
CDot11IfCipherType
|
||
|
|
FROM CISCO-DOT11-IF-MIB
|
||
|
|
ciscoMgmt
|
||
|
|
FROM CISCO-SMI;
|
||
|
|
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* MODULE IDENTITY
|
||
|
|
--********************************************************************
|
||
|
|
|
||
|
|
ciscoDot11AssociationMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200701050000Z"
|
||
|
|
ORGANIZATION "Cisco Systems Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
" Cisco Systems
|
||
|
|
Customer Service
|
||
|
|
|
||
|
|
Postal: 170 West Tasman Drive,
|
||
|
|
San Jose CA 95134-1706.
|
||
|
|
USA
|
||
|
|
|
||
|
|
Tel: +1 800 553-NETS
|
||
|
|
|
||
|
|
E-mail: cs-dot11@cisco.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB module provides network management
|
||
|
|
information on IEEE 802.11 wireless device
|
||
|
|
association management and data packet forwarding
|
||
|
|
configuration and statistics. This MIB is an
|
||
|
|
extension to the IEEE802dot11-MIB and provides
|
||
|
|
per client based information.
|
||
|
|
|
||
|
|
The IEEE802dot11-MIB is defined in the IEEE Std
|
||
|
|
802.11-Jan 14 1999, Wireless LAN Medium Access
|
||
|
|
Control and Physical Layer Specifications, by the
|
||
|
|
LAN MAN Standards Committee of the IEEE Computer
|
||
|
|
Society.
|
||
|
|
|
||
|
|
|
||
|
|
GLOSSARY and ACRONYMS
|
||
|
|
|
||
|
|
|
||
|
|
Access point (AP)
|
||
|
|
Transmitter/receiver (transceiver) device
|
||
|
|
that commonly connects and transports data
|
||
|
|
between a wireless network and a wired network.
|
||
|
|
|
||
|
|
AES
|
||
|
|
Advanced Encryption Standard
|
||
|
|
|
||
|
|
Association
|
||
|
|
The service used to establish access point
|
||
|
|
or station mapping and enable STA invocation
|
||
|
|
of the distribution system serivces.
|
||
|
|
(Wireless clients attempt to connect to
|
||
|
|
access points.)
|
||
|
|
|
||
|
|
Bridge
|
||
|
|
Device that connects two or more segments
|
||
|
|
and reduces traffic by analyzing the
|
||
|
|
destination address, filtering the frame,
|
||
|
|
and forwarding the frame to all connected
|
||
|
|
segments.
|
||
|
|
|
||
|
|
Bridge AP
|
||
|
|
It is an AP that functions as a transparent
|
||
|
|
bridge between 2 wired LAN segments.
|
||
|
|
|
||
|
|
Bridge Host
|
||
|
|
This is also known as Work Group Bridge. This
|
||
|
|
is a non-root bridge that is connected to a
|
||
|
|
remote LAN segment and will only communicate
|
||
|
|
with repeaters or root bridges. It does not
|
||
|
|
accept association from other wireless devices.
|
||
|
|
|
||
|
|
BSS
|
||
|
|
IEEE 802.11 Basic Service Set (Radio Cell). The
|
||
|
|
BSS of an AP comprises of the stations directly
|
||
|
|
associated with the AP.
|
||
|
|
|
||
|
|
CCX
|
||
|
|
Cisco Compatible eXtensions
|
||
|
|
|
||
|
|
A set of specifications which when implemented
|
||
|
|
would make a client radio interoperable with a
|
||
|
|
Cisco WLAN infrastructure and make best use of the
|
||
|
|
innovations for enhanced security, mobility,
|
||
|
|
quality of service and network management.
|
||
|
|
|
||
|
|
CCMP
|
||
|
|
Code Mode/CBC Mac Protocol
|
||
|
|
|
||
|
|
Client (Client Station)
|
||
|
|
A wireless device in a wireless network
|
||
|
|
associated with an access point.
|
||
|
|
|
||
|
|
Direct Sequence Spread Sprectrum ( DSSS )
|
||
|
|
|
||
|
|
DSSS is a method to send data where the
|
||
|
|
transmitting and receiving systems operate at
|
||
|
|
frequencies as wide as 22MHz. The wide channels
|
||
|
|
help the participating systems to send more
|
||
|
|
information at higher data rates than the FSSS
|
||
|
|
systems.
|
||
|
|
|
||
|
|
EAP
|
||
|
|
Extensible Authentication Protocol
|
||
|
|
|
||
|
|
EAP-TLS
|
||
|
|
Extensible Authentication Protocol-Transport
|
||
|
|
Layer Security
|
||
|
|
|
||
|
|
Frequency Hopping Spread Spectrum ( FSSS )
|
||
|
|
|
||
|
|
FSSS systems hop from one frequency to another in
|
||
|
|
the allowed band of frequencies during the data
|
||
|
|
transmission. 83 MHz is specified as the allowed
|
||
|
|
band of frequencies in the 2.4 GHz spectrum.
|
||
|
|
|
||
|
|
IEEE 802.11
|
||
|
|
Standard to encourage interoperability among
|
||
|
|
wireless networking equipment.
|
||
|
|
|
||
|
|
IEEE 802.11b
|
||
|
|
|
||
|
|
The IEEE 802.11b standard describes DSSS systems
|
||
|
|
that operate in the 2.4 GHz ISM band at data
|
||
|
|
rates of 1, 2, 5,5 and 11 Mbps.
|
||
|
|
|
||
|
|
IEEE 802.11a
|
||
|
|
|
||
|
|
The IEEE 802.11a standard describes wireless LAN
|
||
|
|
operation in the 5 GHz UNII band at data rates
|
||
|
|
of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps.
|
||
|
|
|
||
|
|
IEEE 802.11g
|
||
|
|
|
||
|
|
This standard specifies operation in 2.4 GHz ISM
|
||
|
|
band at data rates of 6, 9, 12, 18. 24, 36, 48 and
|
||
|
|
54 Mbps.
|
||
|
|
|
||
|
|
Industrial, Scientific and Medical band (ISM)
|
||
|
|
|
||
|
|
A license-free band specified by the Federal
|
||
|
|
Communications Commission for use by the wireless
|
||
|
|
LAN systems. The ISM bands are located starting
|
||
|
|
at 902 MHz, 2.4GHz and 5.8 GHz.
|
||
|
|
|
||
|
|
MIC
|
||
|
|
Message Integrity Check. A MIC can, optionally,
|
||
|
|
be added to WEP-encrypted 802.11 frames.
|
||
|
|
|
||
|
|
Non-Root Bridge
|
||
|
|
This wireless bridge does not connect to the main
|
||
|
|
wired LAN segment. It connects to a remote wired
|
||
|
|
LAN segment and can associate to root bridges and
|
||
|
|
other non-root bridges that accept client
|
||
|
|
associations. It also can accept associations
|
||
|
|
from other non-root bridges, repeater access
|
||
|
|
points, and client devices.
|
||
|
|
|
||
|
|
PCI
|
||
|
|
Peripheral Component Interconnect
|
||
|
|
|
||
|
|
A local bus standard developed by Intel
|
||
|
|
Corporation. Most modern PCs include a PCI bus.
|
||
|
|
PCI is a 64-bit bus, though it is usually
|
||
|
|
implemented as a 32-bit bus. It can run at clock
|
||
|
|
speeds of 33 or 66 MHz. At 32 bits and 33 MHz, it
|
||
|
|
yields a throughput rate of 133 MBps.
|
||
|
|
|
||
|
|
Repeater
|
||
|
|
Device that connects multiple segments, listening
|
||
|
|
to each and repeating signal on one to every other
|
||
|
|
connected one; regenerates each transmission
|
||
|
|
so that it can travel farther.
|
||
|
|
|
||
|
|
Repeater or Non-root Access Point
|
||
|
|
The repeater access point is not connected
|
||
|
|
to the wired LAN. The Repeater is a wireless
|
||
|
|
LAN transceiver that transfers data between
|
||
|
|
a client and another access point, another
|
||
|
|
repeater, or between two bridges. The repeater
|
||
|
|
is placed within radio range of an access point
|
||
|
|
connected to the wired LAN, another repeater, or
|
||
|
|
an non-root bridge to extend the range of the
|
||
|
|
infrastructure.
|
||
|
|
|
||
|
|
Root Access Point
|
||
|
|
This access point connects clients to the main
|
||
|
|
wired LAN.
|
||
|
|
|
||
|
|
Root Wireless Bridge
|
||
|
|
This wireless bridge is connected to the main
|
||
|
|
wired LAN. This wireless bridge can communicate
|
||
|
|
with non-root wireless bridges, repeater access
|
||
|
|
points, and client devices but not with another
|
||
|
|
wireless root bridge. Only one wireless bridge
|
||
|
|
in a wireless LAN can be set as the wireless
|
||
|
|
root bridge.
|
||
|
|
|
||
|
|
SSID
|
||
|
|
Radio Service Set ID. It is used for identification
|
||
|
|
during association.
|
||
|
|
|
||
|
|
STA (WSTA)
|
||
|
|
A non-AP 802.11 wireless station.
|
||
|
|
|
||
|
|
TKIP
|
||
|
|
WPA Temporal Key encryption.
|
||
|
|
|
||
|
|
Unlicensed National Information Infrastucture (UNII)
|
||
|
|
|
||
|
|
The UNII bands are in the 5 GHz range and are 100
|
||
|
|
MHz wide. These bands are used by 802.11a-compliant
|
||
|
|
devices.
|
||
|
|
|
||
|
|
WEP
|
||
|
|
Wired Equivalent Privacy. 'WEP' is generally used
|
||
|
|
to refer to 802.11 encryption.
|
||
|
|
|
||
|
|
WPA
|
||
|
|
WiFi Protected Access
|
||
|
|
|
||
|
|
Work Group Bridges (WGB)
|
||
|
|
See bridge host."
|
||
|
|
REVISION "200701050000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"The changes made are as follows.
|
||
|
|
|
||
|
|
- Added more explanations on the kind of entries
|
||
|
|
populated for cDot11ClientConfigInfoTable, on
|
||
|
|
infrastructure clients like repeaters, non-root
|
||
|
|
bridges and workgroup bridges.
|
||
|
|
|
||
|
|
- Added cDot11ClientNewKeyManagement object
|
||
|
|
to the cDot11ClientConfigInfoTable. "
|
||
|
|
|
||
|
|
REVISION "200606120000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"The changes made are as follows.
|
||
|
|
|
||
|
|
- Added the following enumerations to
|
||
|
|
CDot11ClientRadioType.
|
||
|
|
|
||
|
|
- 'cb21ag'
|
||
|
|
- 'ccxClient'
|
||
|
|
- 'unknown'
|
||
|
|
|
||
|
|
- Added 'unknown' to CDot11ClientDevType.
|
||
|
|
|
||
|
|
- Added cDot11ClientDevObjectID to
|
||
|
|
cDot11ClientConfigInfoTable. "
|
||
|
|
|
||
|
|
REVISION "200503080000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Updated CDot11ClientDevType to include a new device
|
||
|
|
type. Updated CDot11ClientRadioType to include new
|
||
|
|
radio types."
|
||
|
|
REVISION "200411280000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Correct spelling of CDot11AuthenicationMethod to
|
||
|
|
CDot11AuthenticationMethod."
|
||
|
|
REVISION "200410180000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new client VLAN, sub-interface ifIndex, key
|
||
|
|
management type, authentication type, and cipher
|
||
|
|
type information."
|
||
|
|
REVISION "200402190000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new cd11IfCipherStatsTable for radio interface
|
||
|
|
AES, TKIP, and security tempering attempts statistics."
|
||
|
|
REVISION "200307270000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new IEEE 802.11g radio type to
|
||
|
|
CDot11ClientRadioType and new AP device type to
|
||
|
|
CDot11ClientDevType."
|
||
|
|
REVISION "200304110000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new objects for client software version, IP
|
||
|
|
address, name, and association or authentication state."
|
||
|
|
REVISION "200301290000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added new 5GHz radio type to CDot11ClientRadioType
|
||
|
|
and new client types to CDot11ClientDevType."
|
||
|
|
REVISION "200207150000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Corrected the unit of cDot11ClientBytesReceived."
|
||
|
|
REVISION "200204170000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added a new index cd11IfAuxSsid and a new object
|
||
|
|
cDot11ClientParentAddress to the
|
||
|
|
cDot11ClientConfigInfoTable."
|
||
|
|
REVISION "200203060000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version of this MIB module."
|
||
|
|
::= { ciscoMgmt 273 }
|
||
|
|
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBObjects OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssociationMIB 1 }
|
||
|
|
|
||
|
|
cDot11AssociationGlobal OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssocMIBObjects 1 }
|
||
|
|
|
||
|
|
cDot11ClientConfiguration OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssocMIBObjects 2 }
|
||
|
|
|
||
|
|
cDot11ClientStatistics OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssocMIBObjects 3 }
|
||
|
|
|
||
|
|
|
||
|
|
-- Textual Conventions
|
||
|
|
|
||
|
|
CDot11ClientRoleClassType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This defines the type of role of a wireless device.
|
||
|
|
The device types are:
|
||
|
|
clientStation(0) - client station,
|
||
|
|
repeater(1) - repeater access point,
|
||
|
|
accessPoint(2) - access point,
|
||
|
|
bridgeHost(3) - bridge host (WGB),
|
||
|
|
bridge(4) - bridge,
|
||
|
|
bridgeRoot(5) - root bridge
|
||
|
|
ethernetClient(6) - Ethernet client through WGB."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
clientStation(0),
|
||
|
|
repeater(1),
|
||
|
|
accessPoint(2),
|
||
|
|
bridgeHost(3),
|
||
|
|
bridge(4),
|
||
|
|
bridgeRoot(5),
|
||
|
|
ethernetClient(6) }
|
||
|
|
|
||
|
|
CDot11ClientDevType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This defines the classifications of wireless client
|
||
|
|
device. The devices are classified by their Ethernet
|
||
|
|
connection, serial connection, and the type of radio
|
||
|
|
it uses. The device classifications are:
|
||
|
|
unknown(1) - unknown,
|
||
|
|
ethernetAP(76) - Ethernet access point,
|
||
|
|
ethernetBridge(77) - Ethernet bridge,
|
||
|
|
pc3000Client(84) - client with a 3000 radio,
|
||
|
|
serialUC(85) - serial port universal
|
||
|
|
client,
|
||
|
|
ethernetUC(86) - Ethernet universal
|
||
|
|
client,
|
||
|
|
pc3500Client(101) - client with a 5300 radio,
|
||
|
|
pc4500Client(102) - client with a 4500 radio,
|
||
|
|
generic80211Client(104) - client of an unknown
|
||
|
|
radio type and non-Cisco
|
||
|
|
device,
|
||
|
|
pc4800Client(109) - client with a 4800 radio,
|
||
|
|
pc3100Client(110) - client with a 3100 radio,
|
||
|
|
mc(111) - multiple client Ethernet,
|
||
|
|
universal client,
|
||
|
|
ethernetClient(112) - Ethernet client of a WGB,
|
||
|
|
pc4800bClient(117) - client with a 4800b radio,
|
||
|
|
wgbNoDiversity(123) - WGB with one antenna,
|
||
|
|
wgb(124) - WGB with two antennas,
|
||
|
|
series350Client(127) - client with 350 series
|
||
|
|
radio,
|
||
|
|
series370Client(128) - client with 370 series
|
||
|
|
dot11A radio,
|
||
|
|
c1100SeriesAP(129) - Cisco 1100 series AP,
|
||
|
|
c1410SeriesBridge(130) - Cisco 1410 series bridge,
|
||
|
|
c1200SeriesAP(132) - Cisco 1200 series AP,
|
||
|
|
mp2xClient(133) - client with MP2x IEEE
|
||
|
|
802.11g radio,
|
||
|
|
c350SeriesAP(134) - Cisco IOS 350 series AP,
|
||
|
|
cb21agClient(135) - Cisco CB21AG/PI21AG
|
||
|
|
IEEE 802.lla/b/g client,
|
||
|
|
radioKodiak(136) - Cisco IEEE 802.11a
|
||
|
|
AIR-RM21A-x-K9 and
|
||
|
|
AIR-RM22A-x-K9 radio,
|
||
|
|
c1130SeriesAP(137) - Cisco 1130 series AP,
|
||
|
|
c1310SeriesBridge(138) - Cisco 1310 series bridge,
|
||
|
|
c7920phone(139) - Cisco 7920 series phone,
|
||
|
|
c1240SeriesAP(140) - Cisco 1240 series AP. "
|
||
|
|
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
ethernetAP(76),
|
||
|
|
ethernetBridge(77),
|
||
|
|
pc3000Client(84),
|
||
|
|
serialUC(85),
|
||
|
|
ethernetUC(86),
|
||
|
|
pc3500Client(101),
|
||
|
|
pc4500Client(102),
|
||
|
|
generic80211Client(104),
|
||
|
|
pc4800Client(109),
|
||
|
|
pc3100Client(110),
|
||
|
|
mc(111),
|
||
|
|
ethernetClient(112),
|
||
|
|
pc4800bClient(117),
|
||
|
|
wgbNoDiversity(123),
|
||
|
|
wgb(124),
|
||
|
|
series350Client(127),
|
||
|
|
series370Client(128),
|
||
|
|
c1100SeriesAP(129),
|
||
|
|
c1410SeriesBridge(130),
|
||
|
|
c1200SeriesAP(132),
|
||
|
|
mp2xClient(133),
|
||
|
|
c350SeriesAP(134),
|
||
|
|
cb21agClient(135),
|
||
|
|
radioKodiak(136),
|
||
|
|
c1130SeriesAP(137),
|
||
|
|
c1310SeriesBridge(138),
|
||
|
|
c7920phone(139),
|
||
|
|
c1240SeriesAP(140)
|
||
|
|
}
|
||
|
|
|
||
|
|
CDot11ClientRadioType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This defines the radio classifications of wireless
|
||
|
|
stations. It indicates the model number of the radio
|
||
|
|
in the remote unit. The radio classifications are:
|
||
|
|
unknown(1) - unknown,
|
||
|
|
ccxClient(2) - CCX-compatible radio,
|
||
|
|
pc3500(3) - Cisco 3500 radio,
|
||
|
|
pc3000(4) - Cisco 3000 radio,
|
||
|
|
pc4500(6) - Cisco 4500 radio,
|
||
|
|
pc4800(12) - Cisco 4800 radio,
|
||
|
|
pc3100(13) - Cisco 3100 radio,
|
||
|
|
series340(33) - Cisco 340 series radio,
|
||
|
|
series350(34) - Cisco 350 series radio,
|
||
|
|
series370(35) - Cisco 370 series dot11A radio,
|
||
|
|
bridge1410(36) - Cisco 1410 bridge 5GHz radio,
|
||
|
|
mp2xSeries(37) - Cisco 11g MP2x series radio,
|
||
|
|
rm2xSeries(38) - Cisco 11a RM2x series radio,
|
||
|
|
rm2gSeries(39) - Cisco 11g RM2x series radio,
|
||
|
|
mp2xMAR(40) - Cisco 3210 MAR 11g MP2x radio,
|
||
|
|
cb21ag(46) - Cisco CB21AG/PI21AG
|
||
|
|
IEEE 802.11a/b/g radio. "
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
unknown(1),
|
||
|
|
ccxClient(2),
|
||
|
|
pc3500(3),
|
||
|
|
pc3000(4),
|
||
|
|
pc4500(6),
|
||
|
|
pc4800(12),
|
||
|
|
pc3100(13),
|
||
|
|
series340(33),
|
||
|
|
series350(34),
|
||
|
|
series370(35),
|
||
|
|
bridge1410(36),
|
||
|
|
mp2xSeries(37),
|
||
|
|
rm2xSeries(38),
|
||
|
|
rm2gSeries(39),
|
||
|
|
mp2xMAR(40),
|
||
|
|
cb21ag(46)
|
||
|
|
}
|
||
|
|
|
||
|
|
CDot11AuthenticationMethod ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the IEEE 802.11 supported
|
||
|
|
authentication methods for wireless devices:
|
||
|
|
open(1) - Open System
|
||
|
|
sharedKey(2) - Shared Key
|
||
|
|
networkEap(129) - Network EAP."
|
||
|
|
REFERENCE
|
||
|
|
"IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium
|
||
|
|
Access Control and Physical Layer Specifications,
|
||
|
|
LAN MAN Standards Committee of the IEEE Computer
|
||
|
|
Society, IEEE802dot11-MIB,
|
||
|
|
dot11AuthenticationAlgorithm."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
open(1),
|
||
|
|
sharedKey(2),
|
||
|
|
networkEap(129)
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
CDot11AdditionalAuthenMethod ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the additional authentications that can
|
||
|
|
be performed after IEEE 802.11 Open System or Shared
|
||
|
|
Key authentication is completed successfully:
|
||
|
|
mac(0) - MAC address authentication
|
||
|
|
eap(1) - EAP authentication."
|
||
|
|
SYNTAX BITS {
|
||
|
|
mac(0),
|
||
|
|
eap(1)
|
||
|
|
}
|
||
|
|
|
||
|
|
CDot11Dot1xAuthenMethod ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the IEEE 802.1x authentication methods
|
||
|
|
performed between the IEEE 802.11 wireless clients
|
||
|
|
and the authentication server. Depending on the
|
||
|
|
server and client configuration, more than one
|
||
|
|
authentication methods can be performed for any
|
||
|
|
IEEE 802.11 association. The IEEE 802.1x
|
||
|
|
authentication methods are:
|
||
|
|
md5(0) - Message-digest algorithm
|
||
|
|
leap(1) - Cisco Light-weight EAP
|
||
|
|
peap(2) - Protected EAP
|
||
|
|
eapTls(3) - EAP Transport Layer Security
|
||
|
|
eapSim(4) - EAP Enhanced GSM Authentication
|
||
|
|
eapFast(5) - Cisco EAP Fast."
|
||
|
|
SYNTAX BITS {
|
||
|
|
md5(0),
|
||
|
|
leap(1),
|
||
|
|
peap(2),
|
||
|
|
eapTls(3),
|
||
|
|
eapSim(4),
|
||
|
|
eapFast(5)
|
||
|
|
}
|
||
|
|
|
||
|
|
CDot11KeyManagementMethod ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the encryption key management methods
|
||
|
|
for IEEE 802.11 wireless frame encryption. The key
|
||
|
|
management methods are:
|
||
|
|
wpa(0) - Wi-Fi Protected Access
|
||
|
|
cckm(1) - Cisco proprietary key management."
|
||
|
|
SYNTAX BITS {
|
||
|
|
wpa(0),
|
||
|
|
cckm(1)
|
||
|
|
}
|
||
|
|
|
||
|
|
CDot11NewKeyManagementMethod ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the encryption key management methods
|
||
|
|
for IEEE 802.11 wireless frame encryption. The key
|
||
|
|
management methods are:
|
||
|
|
cckm(0) - Cisco proprietary key management
|
||
|
|
wpa1(1) - Wi-Fi Protected Access version 1
|
||
|
|
wpa2(2) - Wi-Fi Protected Access version 2."
|
||
|
|
SYNTAX BITS {
|
||
|
|
cckm(0),
|
||
|
|
wpa1(1),
|
||
|
|
wpa2(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* dot11 association global parameters
|
||
|
|
--********************************************************************
|
||
|
|
cDot11ParentAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the MAC address of the parent access point
|
||
|
|
or root bridge for this device. The value is zero
|
||
|
|
if this is a root access point or bridge."
|
||
|
|
::= { cDot11AssociationGlobal 1 }
|
||
|
|
|
||
|
|
cDot11ActiveDevicesTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CDot11ActiveDevicesEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains the list of active devices
|
||
|
|
currently associated with this device on each of
|
||
|
|
the IEEE 802.11 interfaces. This table has a
|
||
|
|
sparse dependent relationship on the ifTable."
|
||
|
|
::= { cDot11AssociationGlobal 2 }
|
||
|
|
|
||
|
|
cDot11ActiveDevicesEntry OBJECT-TYPE
|
||
|
|
SYNTAX CDot11ActiveDevicesEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An entry represents a currently active device
|
||
|
|
associated with this device. These active devices
|
||
|
|
include: wireless clients, repeaters, and bridges."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { cDot11ActiveDevicesTable 1 }
|
||
|
|
|
||
|
|
CDot11ActiveDevicesEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
cDot11ActiveWirelessClients Gauge32,
|
||
|
|
cDot11ActiveBridges Gauge32,
|
||
|
|
cDot11ActiveRepeaters Gauge32
|
||
|
|
}
|
||
|
|
|
||
|
|
cDot11ActiveWirelessClients OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32 (0..2007)
|
||
|
|
UNITS "Device"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the number of wireless clients
|
||
|
|
currently associating with this device on this
|
||
|
|
interface."
|
||
|
|
::= { cDot11ActiveDevicesEntry 1 }
|
||
|
|
|
||
|
|
cDot11ActiveBridges OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32 (0..2007)
|
||
|
|
UNITS "Device"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the number of bridges currently
|
||
|
|
associating with this device on this interface."
|
||
|
|
::= { cDot11ActiveDevicesEntry 2 }
|
||
|
|
|
||
|
|
cDot11ActiveRepeaters OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32 (0..2007)
|
||
|
|
UNITS "Device"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the number of repeaters currently
|
||
|
|
associating with this device on this interface."
|
||
|
|
::= { cDot11ActiveDevicesEntry 3 }
|
||
|
|
|
||
|
|
cDot11AssociationStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CDot11AssociationStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains statistics for various
|
||
|
|
devices associated with this device on each
|
||
|
|
of the IEEE 802.11 interfaces since it was
|
||
|
|
last re-started. These devices include: wireless
|
||
|
|
clients, repeaters, and bridges. This table has
|
||
|
|
a sparse dependent relationship on the ifTable."
|
||
|
|
::= { cDot11AssociationGlobal 3 }
|
||
|
|
|
||
|
|
cDot11AssociationStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX CDot11AssociationStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry provides association statistics of
|
||
|
|
various devices interacting with this device on
|
||
|
|
each of the IEEE 802.11 interfaces."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { cDot11AssociationStatsTable 1 }
|
||
|
|
|
||
|
|
CDot11AssociationStatsEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
cDot11AssStatsAssociated Counter32,
|
||
|
|
cDot11AssStatsAuthenticated Counter32,
|
||
|
|
cDot11AssStatsRoamedIn Counter32,
|
||
|
|
cDot11AssStatsRoamedAway Counter32,
|
||
|
|
cDot11AssStatsDeauthenticated Counter32,
|
||
|
|
cDot11AssStatsDisassociated Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
cDot11AssStatsAssociated OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "client"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of stations
|
||
|
|
associated with this device on this interface
|
||
|
|
since device re-started."
|
||
|
|
::= { cDot11AssociationStatsEntry 1 }
|
||
|
|
|
||
|
|
cDot11AssStatsAuthenticated OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "client"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of stations
|
||
|
|
authenticated with this device on this interface
|
||
|
|
since device re-started."
|
||
|
|
::= { cDot11AssociationStatsEntry 2 }
|
||
|
|
|
||
|
|
cDot11AssStatsRoamedIn OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "client"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of stations
|
||
|
|
roamed from another device to this device on
|
||
|
|
this interface since device re-started."
|
||
|
|
::= { cDot11AssociationStatsEntry 3 }
|
||
|
|
|
||
|
|
cDot11AssStatsRoamedAway OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "client"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of stations
|
||
|
|
roamed away from this device on this interface
|
||
|
|
since device re-started."
|
||
|
|
::= { cDot11AssociationStatsEntry 4 }
|
||
|
|
|
||
|
|
cDot11AssStatsDeauthenticated OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "client"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of stations
|
||
|
|
deauthenticated with this device on this
|
||
|
|
interface since device re-started."
|
||
|
|
::= { cDot11AssociationStatsEntry 5 }
|
||
|
|
|
||
|
|
cDot11AssStatsDisassociated OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "client"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of stations
|
||
|
|
disassociated with this device on this
|
||
|
|
interface since device re-started."
|
||
|
|
::= { cDot11AssociationStatsEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
cd11IfCipherStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF Cd11IfCipherStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table includes AES, TKIP, and security tempering
|
||
|
|
attempts statistics collected by the IEEE 802.11 radio
|
||
|
|
interfaces and system management. This table has a
|
||
|
|
sparse dependent relationship on the ifTable. For
|
||
|
|
each entry in this table, there exists an entry in the
|
||
|
|
ifTable of ifType ieee80211(71)."
|
||
|
|
::= { cDot11AssociationGlobal 4 }
|
||
|
|
|
||
|
|
cd11IfCipherStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX Cd11IfCipherStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry provides cipher related statistics
|
||
|
|
collected on each of the IEEE 802.11 interfaces."
|
||
|
|
INDEX { ifIndex }
|
||
|
|
::= { cd11IfCipherStatsTable 1 }
|
||
|
|
|
||
|
|
Cd11IfCipherStatsEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
cd11IfCipherMicFailClientAddress MacAddress,
|
||
|
|
cd11IfCipherTkipLocalMicFailures Counter32,
|
||
|
|
cd11IfCipherTkipRemotMicFailures Counter32,
|
||
|
|
cd11IfCipherTkipCounterMeasInvok Counter32,
|
||
|
|
cd11IfCipherCcmpReplaysDiscarded Counter32,
|
||
|
|
cd11IfCipherTkipReplaysDetected Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
cd11IfCipherMicFailClientAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is MAC address of the client attached to
|
||
|
|
this radio interface that caused the most recent
|
||
|
|
MIC failure."
|
||
|
|
::= { cd11IfCipherStatsEntry 1 }
|
||
|
|
|
||
|
|
cd11IfCipherTkipLocalMicFailures OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of MIC failures
|
||
|
|
encountered on this radio interface since device
|
||
|
|
re-started."
|
||
|
|
::= { cd11IfCipherStatsEntry 2 }
|
||
|
|
|
||
|
|
cd11IfCipherTkipRemotMicFailures OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of MIC failures
|
||
|
|
reported by clients on this radio interface
|
||
|
|
since device re-started."
|
||
|
|
::= { cd11IfCipherStatsEntry 3 }
|
||
|
|
|
||
|
|
cd11IfCipherTkipCounterMeasInvok OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of TKIP Counter
|
||
|
|
Measures invoked on this interface since
|
||
|
|
device re-started."
|
||
|
|
::= { cd11IfCipherStatsEntry 4 }
|
||
|
|
|
||
|
|
cd11IfCipherCcmpReplaysDiscarded OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of received
|
||
|
|
unicast fragments discarded by replay mechanism
|
||
|
|
on this interface since device re-started."
|
||
|
|
::= { cd11IfCipherStatsEntry 5 }
|
||
|
|
|
||
|
|
cd11IfCipherTkipReplaysDetected OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object counts the number of TKIP replay
|
||
|
|
errors detected on this interface since device
|
||
|
|
re-started."
|
||
|
|
::= { cd11IfCipherStatsEntry 6 }
|
||
|
|
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* dot11 client configuration
|
||
|
|
--********************************************************************
|
||
|
|
|
||
|
|
cDot11ClientConfigInfoTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CDot11ClientConfigInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains configuration information of
|
||
|
|
client devices. Entries on this table are created
|
||
|
|
by the device radio driver when clients establish
|
||
|
|
association with the device. Entries are removed
|
||
|
|
when clients disassociate with the device. These
|
||
|
|
clients include: wireless clients, repeaters,
|
||
|
|
and bridges. On Infrastructure clients like
|
||
|
|
repeaters, non-root bridges and workgroup bridges,
|
||
|
|
this table also has an entry for the parent device
|
||
|
|
they are associated to."
|
||
|
|
::= { cDot11ClientConfiguration 1 }
|
||
|
|
|
||
|
|
cDot11ClientConfigInfoEntry OBJECT-TYPE
|
||
|
|
SYNTAX CDot11ClientConfigInfoEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry is the device specification of a client
|
||
|
|
of this device on the IEEE 802.11 radio interfaces.
|
||
|
|
Clients are grouped according to the SSIDs of the
|
||
|
|
interfaces they use for associations and the MAC
|
||
|
|
address of their parent devices if the clients are
|
||
|
|
repeat APs."
|
||
|
|
INDEX {
|
||
|
|
ifIndex,
|
||
|
|
cd11IfAuxSsid,
|
||
|
|
cDot11ClientAddress
|
||
|
|
}
|
||
|
|
::= { cDot11ClientConfigInfoTable 1 }
|
||
|
|
|
||
|
|
CDot11ClientConfigInfoEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
cDot11ClientAddress MacAddress,
|
||
|
|
cDot11ClientParentAddress MacAddress,
|
||
|
|
cDot11ClientRoleClassType CDot11ClientRoleClassType,
|
||
|
|
cDot11ClientDevType CDot11ClientDevType,
|
||
|
|
cDot11ClientRadioType CDot11ClientRadioType,
|
||
|
|
cDot11ClientWepEnabled TruthValue,
|
||
|
|
cDot11ClientWepKeyMixEnabled TruthValue,
|
||
|
|
cDot11ClientMicEnabled TruthValue,
|
||
|
|
cDot11ClientPowerSaveMode INTEGER,
|
||
|
|
cDot11ClientAid Unsigned32,
|
||
|
|
cDot11ClientDataRateSet OCTET STRING,
|
||
|
|
cDot11ClientSoftwareVersion SnmpAdminString,
|
||
|
|
cDot11ClientName SnmpAdminString,
|
||
|
|
cDot11ClientAssociationState INTEGER,
|
||
|
|
cDot11ClientIpAddressType InetAddressType,
|
||
|
|
cDot11ClientIpAddress InetAddress,
|
||
|
|
cDot11ClientVlanId CDot11IfVlanIdOrZero,
|
||
|
|
cDot11ClientSubIfIndex InterfaceIndex,
|
||
|
|
cDot11ClientAuthenAlgorithm
|
||
|
|
CDot11AuthenticationMethod,
|
||
|
|
cDot11ClientAdditionalAuthen
|
||
|
|
CDot11AdditionalAuthenMethod,
|
||
|
|
cDot11ClientDot1xAuthenAlgorithm
|
||
|
|
CDot11Dot1xAuthenMethod,
|
||
|
|
cDot11ClientKeyManagement
|
||
|
|
CDot11KeyManagementMethod,
|
||
|
|
cDot11ClientUnicastCipher
|
||
|
|
CDot11IfCipherType,
|
||
|
|
cDot11ClientMulticastCipher
|
||
|
|
CDot11IfCipherType,
|
||
|
|
cDot11ClientDevObjectID OBJECT IDENTIFIER,
|
||
|
|
cDot11ClientNewKeyManagement
|
||
|
|
CDot11NewKeyManagementMethod
|
||
|
|
}
|
||
|
|
|
||
|
|
cDot11ClientAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The MAC address of the client."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 1 }
|
||
|
|
|
||
|
|
cDot11ClientParentAddress OBJECT-TYPE
|
||
|
|
SYNTAX MacAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The MAC address of the parent of the client if the
|
||
|
|
client is a repeater AP. If this client has no parent,
|
||
|
|
the value is '00000000'h."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 2 }
|
||
|
|
|
||
|
|
cDot11ClientRoleClassType OBJECT-TYPE
|
||
|
|
SYNTAX CDot11ClientRoleClassType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The role classification of the client."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 3 }
|
||
|
|
|
||
|
|
cDot11ClientDevType OBJECT-TYPE
|
||
|
|
SYNTAX CDot11ClientDevType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The device type of the client."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 4 }
|
||
|
|
|
||
|
|
cDot11ClientRadioType OBJECT-TYPE
|
||
|
|
SYNTAX CDot11ClientRadioType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The radio classification of the client."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 5 }
|
||
|
|
|
||
|
|
cDot11ClientWepEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When this object is 'true', it indicates that the
|
||
|
|
WEP key mechanism is used for transmitting frames
|
||
|
|
of data for this client. The default value of this
|
||
|
|
object is 'false'."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { cDot11ClientConfigInfoEntry 6 }
|
||
|
|
|
||
|
|
cDot11ClientWepKeyMixEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When this object is 'true', it indicates that this
|
||
|
|
client is using WEP key mixing."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { cDot11ClientConfigInfoEntry 7 }
|
||
|
|
|
||
|
|
cDot11ClientMicEnabled OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"When this object is 'true', it indicates that the
|
||
|
|
MIC is enabled for this client. The default value of
|
||
|
|
this object is 'false'."
|
||
|
|
DEFVAL { false }
|
||
|
|
::= { cDot11ClientConfigInfoEntry 8 }
|
||
|
|
|
||
|
|
cDot11ClientPowerSaveMode OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
powersave(2) }
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The power management mode of this client. The
|
||
|
|
two possible modes are:
|
||
|
|
active(1) - this client is not in power-save
|
||
|
|
mode and it is actively sending or
|
||
|
|
receiving data.
|
||
|
|
powersave(2) - this client is in power-save mode and
|
||
|
|
it wakes up once a while to check for
|
||
|
|
pending data."
|
||
|
|
DEFVAL { active }
|
||
|
|
::= { cDot11ClientConfigInfoEntry 9 }
|
||
|
|
|
||
|
|
cDot11ClientAid OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..2008)
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the association identification number of
|
||
|
|
clients or multicast addresses associating with this
|
||
|
|
device. For a multicast address with clients, the
|
||
|
|
cDot11ClientAid is '0'. For the uplink association
|
||
|
|
from this device to its parent access point, the
|
||
|
|
cDot11ClientAid is always '1'. For any multicast
|
||
|
|
address with no client currently known to be
|
||
|
|
associated with this device, the cDot11ClientAid is
|
||
|
|
'2008'."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 10 }
|
||
|
|
|
||
|
|
cDot11ClientDataRateSet OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..126))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the set of data rates at which this client
|
||
|
|
can transmit and receive data. Each client can
|
||
|
|
support up to 126 rates. Each octet contains an
|
||
|
|
integer value representing one of these 126 rates.
|
||
|
|
Each rate shall be within the range from 2 to 127,
|
||
|
|
corresponding to data rates in increments of 500 kb/s
|
||
|
|
from 1 Mb/s to 63.5 Mb/s, This value is reported in
|
||
|
|
transmitted Beacon, Probe Request, Probe Response,
|
||
|
|
Association Request, Association Response,
|
||
|
|
Reassociation Request, and Reassociation Response
|
||
|
|
frames, and is used to determine whether a BSS with
|
||
|
|
which the client desires to synchronize is suitable.
|
||
|
|
It is also used when starting a BSS."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 11 }
|
||
|
|
|
||
|
|
cDot11ClientSoftwareVersion OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the Cisco IOS software version if the other
|
||
|
|
end of the association is a bridge, access point, or
|
||
|
|
repeater. If it is a wireless client, this is the
|
||
|
|
firmware version of the client card."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 12 }
|
||
|
|
|
||
|
|
cDot11ClientName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the Cisco IOS device hostname if the other
|
||
|
|
end of the association is a bridge, access point, or
|
||
|
|
repeater. If it is a wireless client, this is the
|
||
|
|
configured client name."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 13 }
|
||
|
|
|
||
|
|
cDot11ClientAssociationState OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
initial(1),
|
||
|
|
authenNotAssociated(2),
|
||
|
|
assocAndAuthenticated(3),
|
||
|
|
assocNotAnuthenticated(4)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the state of the authentication
|
||
|
|
and association process between the two parties:
|
||
|
|
initial(1) - association request
|
||
|
|
received from client,
|
||
|
|
authenNotAssociated(2) - 802.11 authenticated but
|
||
|
|
not 802.11 associated,
|
||
|
|
assocAndAuthenticated(3) - 802.11 associated and
|
||
|
|
802.1x authenticated,
|
||
|
|
assocNotAnuthenticated(4) - 802.11 associated but
|
||
|
|
802.1x not
|
||
|
|
authenticated."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 14 }
|
||
|
|
|
||
|
|
cDot11ClientIpAddressType OBJECT-TYPE
|
||
|
|
SYNTAX InetAddressType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the IP address type of the
|
||
|
|
cDot11ClientIpAddress."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 15 }
|
||
|
|
|
||
|
|
cDot11ClientIpAddress OBJECT-TYPE
|
||
|
|
SYNTAX InetAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the static or DHCP assigned IP address of the
|
||
|
|
client."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 16 }
|
||
|
|
|
||
|
|
cDot11ClientVlanId OBJECT-TYPE
|
||
|
|
SYNTAX CDot11IfVlanIdOrZero
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the VLAN which this wireless client is
|
||
|
|
assigned to when it is successfully associated to the
|
||
|
|
wireless station. The value is 0 if this wireless
|
||
|
|
client is not assigned to any VLAN or this wireless
|
||
|
|
station is not configured with any VLAN."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 17 }
|
||
|
|
|
||
|
|
cDot11ClientSubIfIndex OBJECT-TYPE
|
||
|
|
SYNTAX InterfaceIndex
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the ifIndex of the sub-interface which this
|
||
|
|
wireless client is assigned to when it is successfully
|
||
|
|
associated to the wireless station. The value of this
|
||
|
|
object is 0, if this wireless station is not configured
|
||
|
|
with VLAN and this wireless client is assigned to the
|
||
|
|
radio hardware interface of this wireless station."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 18 }
|
||
|
|
|
||
|
|
cDot11ClientAuthenAlgorithm OBJECT-TYPE
|
||
|
|
SYNTAX CDot11AuthenticationMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the IEEE 802.11 authentication methods
|
||
|
|
performed between the wireless station and this client
|
||
|
|
during association."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 19 }
|
||
|
|
|
||
|
|
cDot11ClientAdditionalAuthen OBJECT-TYPE
|
||
|
|
SYNTAX CDot11AdditionalAuthenMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are the additional authentications that were
|
||
|
|
performed after IEEE 802.11 Open System or Shared
|
||
|
|
Key authentication had completed. If none of the bits
|
||
|
|
is set, no additional MAC address or EAP authentication
|
||
|
|
was performed during association."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 20 }
|
||
|
|
|
||
|
|
cDot11ClientDot1xAuthenAlgorithm OBJECT-TYPE
|
||
|
|
SYNTAX CDot11Dot1xAuthenMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This the IEEE 802.1x authentication methods performed
|
||
|
|
between this wireless client and the authentication
|
||
|
|
server. If none of the bits is set, no IEEE 802.1x
|
||
|
|
authentication was performed during association."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 21 }
|
||
|
|
|
||
|
|
cDot11ClientKeyManagement OBJECT-TYPE
|
||
|
|
SYNTAX CDot11KeyManagementMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the encryption key management methods
|
||
|
|
employed by this client for IEEE 802.11 wireless frame
|
||
|
|
encryption. If none of the bits is set, no key
|
||
|
|
management method is employed."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 22 }
|
||
|
|
|
||
|
|
cDot11ClientUnicastCipher OBJECT-TYPE
|
||
|
|
SYNTAX CDot11IfCipherType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are all the possible unicast data frame cipher
|
||
|
|
encryption type combinations currently supported on
|
||
|
|
this IEEE 802.11 client. If none of the bits is set,
|
||
|
|
the client is not performing any unicast data frame
|
||
|
|
encryption.
|
||
|
|
aesccm WPA AES CCMP encryption,
|
||
|
|
ckip Cisco Per packet key hashing,
|
||
|
|
cmic Cisco MMH MIC,
|
||
|
|
ckip|cmic Cisco Per packet key hashing and
|
||
|
|
Cisco MMH MIC,
|
||
|
|
tkip WPA Temporal Key encryption,
|
||
|
|
wep128 128-bit WEP key,
|
||
|
|
wep40 40-bit WEP key.
|
||
|
|
tkip|wep128 WPA Temporal Key and 128-bit WEP,
|
||
|
|
tkip|wep40 WPA Temporal Key and 40-bit WEP."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 23 }
|
||
|
|
|
||
|
|
cDot11ClientMulticastCipher OBJECT-TYPE
|
||
|
|
SYNTAX CDot11IfCipherType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"These are all the possible multi-cast data frame
|
||
|
|
cipher encryption type combinations currently supported
|
||
|
|
on this IEEE 802.11 client. If none of the bits is set,
|
||
|
|
the client is not performing any multi-cast data frame
|
||
|
|
encryption.
|
||
|
|
aesccm WPA AES CCMP encryption,
|
||
|
|
ckip Cisco Per packet key hashing,
|
||
|
|
cmic Cisco MMH MIC,
|
||
|
|
ckip|cmic Cisco Per packet key hashing and
|
||
|
|
Cisco MMH MIC,
|
||
|
|
tkip WPA Temporal Key encryption,
|
||
|
|
wep128 128-bit WEP key,
|
||
|
|
wep40 40-bit WEP key.
|
||
|
|
tkip|wep128 WPA Temporal Key and 128-bit WEP,
|
||
|
|
tkip|wep40 WPA Temporal Key and 40-bit WEP."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 24 }
|
||
|
|
|
||
|
|
cDot11ClientDevObjectID OBJECT-TYPE
|
||
|
|
SYNTAX OBJECT IDENTIFIER
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object indicates the authoritative
|
||
|
|
identification of the associated 802.11 client as
|
||
|
|
assigned by the respective vendor. A value of '0.0'
|
||
|
|
shall be populated if no such identification exists
|
||
|
|
for this 802.11 client. "
|
||
|
|
REFERENCE
|
||
|
|
"sysObjectID from SNMPv2-MIB"
|
||
|
|
::= { cDot11ClientConfigInfoEntry 25 }
|
||
|
|
|
||
|
|
cDot11ClientNewKeyManagement OBJECT-TYPE
|
||
|
|
SYNTAX CDot11NewKeyManagementMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the encryption key management methods
|
||
|
|
employed by this client for IEEE 802.11 wireless frame
|
||
|
|
encryption. If none of the bits is set, no key
|
||
|
|
management method is employed."
|
||
|
|
::= { cDot11ClientConfigInfoEntry 26 }
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* dot11 client statistics
|
||
|
|
--********************************************************************
|
||
|
|
|
||
|
|
cDot11ClientStatisticTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CDot11ClientStatisticEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table contains statistics and status of all
|
||
|
|
clients on the cDot11ClientConfigInfoTable. This table
|
||
|
|
has a one-to-one relationship with the
|
||
|
|
cDot11ClientConfigInfoTable."
|
||
|
|
::= { cDot11ClientStatistics 1 }
|
||
|
|
|
||
|
|
cDot11ClientStatisticEntry OBJECT-TYPE
|
||
|
|
SYNTAX CDot11ClientStatisticEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains statistics about errors,
|
||
|
|
data transmitting and receiving rates and counts
|
||
|
|
information of a client."
|
||
|
|
AUGMENTS { cDot11ClientConfigInfoEntry }
|
||
|
|
::= { cDot11ClientStatisticTable 1 }
|
||
|
|
|
||
|
|
CDot11ClientStatisticEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
cDot11ClientCurrentTxRateSet OCTET STRING,
|
||
|
|
cDot11ClientUpTime Unsigned32,
|
||
|
|
cDot11ClientSignalStrength Integer32,
|
||
|
|
cDot11ClientSigQuality Unsigned32,
|
||
|
|
cDot11ClientAgingLeft Gauge32,
|
||
|
|
cDot11ClientPacketsReceived Counter32,
|
||
|
|
cDot11ClientBytesReceived Counter32,
|
||
|
|
cDot11ClientPacketsSent Counter32,
|
||
|
|
cDot11ClientBytesSent Counter32,
|
||
|
|
cDot11ClientDuplicates Counter32,
|
||
|
|
cDot11ClientMsduRetries Counter32,
|
||
|
|
cDot11ClientMsduFails Counter32,
|
||
|
|
cDot11ClientWepErrors Counter32,
|
||
|
|
cDot11ClientMicErrors Counter32,
|
||
|
|
cDot11ClientMicMissingFrames Counter32 }
|
||
|
|
|
||
|
|
cDot11ClientCurrentTxRateSet OBJECT-TYPE
|
||
|
|
SYNTAX OCTET STRING (SIZE(1..126))
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the set current transmit data rates for
|
||
|
|
this client. Each client can transmit data at all
|
||
|
|
of its configured rates. There is a maximum of 126
|
||
|
|
it can configure to transmit. Each octet contains
|
||
|
|
an integer value representing one of these 126
|
||
|
|
rates it is currently transmitting. Each rate shall
|
||
|
|
be within the range from 2 to 127, corresponding
|
||
|
|
to data rates in increments of 500 kb/s from
|
||
|
|
1 Mb/s to 63.5 Mb/s. This value is reported in
|
||
|
|
transmitted Beacon, Probe Request, Probe Response,
|
||
|
|
Association Request, Association Response,
|
||
|
|
Reassociation Request, and Reassociation Response
|
||
|
|
frames."
|
||
|
|
::= { cDot11ClientStatisticEntry 1 }
|
||
|
|
|
||
|
|
cDot11ClientUpTime OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
UNITS "second"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The time in seconds that this client has been
|
||
|
|
associated with this device."
|
||
|
|
::= { cDot11ClientStatisticEntry 2 }
|
||
|
|
|
||
|
|
cDot11ClientSignalStrength OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (-100..0)
|
||
|
|
UNITS "dBm"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a device-dependent measure of the signal
|
||
|
|
strength of the most recently received packet from
|
||
|
|
this client. It may be normalized or unnormalized."
|
||
|
|
::= { cDot11ClientStatisticEntry 3 }
|
||
|
|
|
||
|
|
cDot11ClientSigQuality OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (0..100)
|
||
|
|
UNITS "percentage"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a device-dependent measure of the signal
|
||
|
|
quality of the most recently received packet from
|
||
|
|
this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 4 }
|
||
|
|
|
||
|
|
cDot11ClientAgingLeft OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
UNITS "second"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of seconds of aging time left for
|
||
|
|
this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 5 }
|
||
|
|
|
||
|
|
cDot11ClientPacketsReceived OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets received from this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 6 }
|
||
|
|
|
||
|
|
cDot11ClientBytesReceived OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "byte"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of bytes received from this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 7 }
|
||
|
|
|
||
|
|
cDot11ClientPacketsSent OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of packets sent to this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 8 }
|
||
|
|
|
||
|
|
cDot11ClientBytesSent OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "byte"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of bytes sent to this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 9 }
|
||
|
|
|
||
|
|
cDot11ClientDuplicates OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This counter increments when a packet for this
|
||
|
|
client is received and the Sequence Control field
|
||
|
|
in the packet header indicates the packet is a
|
||
|
|
duplicate."
|
||
|
|
::= { cDot11ClientStatisticEntry 10 }
|
||
|
|
|
||
|
|
cDot11ClientMsduRetries OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This counter increments when an MSDU is successfully
|
||
|
|
transmitted after one or more retransmissions for this
|
||
|
|
client."
|
||
|
|
::= { cDot11ClientStatisticEntry 11 }
|
||
|
|
|
||
|
|
cDot11ClientMsduFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This counter increments when an MSDU is not
|
||
|
|
transmitted successfully for this client due to the
|
||
|
|
number of transmit attempts exceeding some limit."
|
||
|
|
::= { cDot11ClientStatisticEntry 12 }
|
||
|
|
|
||
|
|
cDot11ClientWepErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the number of packets received from this
|
||
|
|
client which failed to be properly decrypted via
|
||
|
|
the WEP security mechanism."
|
||
|
|
::= { cDot11ClientStatisticEntry 13 }
|
||
|
|
|
||
|
|
cDot11ClientMicErrors OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "error"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the number of MIC errors for this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 14 }
|
||
|
|
|
||
|
|
cDot11ClientMicMissingFrames OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "packet"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the number of missing MIC packets for
|
||
|
|
this client."
|
||
|
|
::= { cDot11ClientStatisticEntry 15 }
|
||
|
|
|
||
|
|
|
||
|
|
-- *****************************************************************
|
||
|
|
-- Conformance information
|
||
|
|
-- *****************************************************************
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBConformance OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssociationMIB 2 }
|
||
|
|
ciscoDot11AssocMIBCompliances OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssocMIBConformance 1 }
|
||
|
|
ciscoDot11AssocMIBGroups OBJECT IDENTIFIER
|
||
|
|
::= { ciscoDot11AssocMIBConformance 2 }
|
||
|
|
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* Compliance statements
|
||
|
|
--********************************************************************
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for the ciscoDot11Assoc
|
||
|
|
group."
|
||
|
|
MODULE MANDATORY-GROUPS {
|
||
|
|
ciscoDot11AssocGlobalGroup,
|
||
|
|
ciscoDot11ClientConfigGroup,
|
||
|
|
ciscoDot11ClientStatGroup
|
||
|
|
}
|
||
|
|
::= { ciscoDot11AssocMIBCompliances 1 }
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBComplianceRev1 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for the ciscoDot11Assoc
|
||
|
|
group. This is deprecated in favor of the
|
||
|
|
ciscoDot11AssocMIBComplianceRev2."
|
||
|
|
MODULE MANDATORY-GROUPS {
|
||
|
|
ciscoDot11AssocGlobalGroup,
|
||
|
|
ciscoDot11ClientConfigGroup,
|
||
|
|
ciscoDot11ClientStatGroup,
|
||
|
|
ciscoDot11ClientInfoGroup
|
||
|
|
}
|
||
|
|
::= { ciscoDot11AssocMIBCompliances 2 }
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBComplianceRev2 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for the ciscoDot11Assoc
|
||
|
|
group."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ciscoDot11ClientConfigGroup,
|
||
|
|
ciscoDot11ClientStatGroup,
|
||
|
|
ciscoDot11ClientInfoGroup,
|
||
|
|
ciscoDot11IfAssocStatGroup,
|
||
|
|
ciscoDot11IfCipherStatGroup
|
||
|
|
}
|
||
|
|
GROUP ciscoDot11ApAssocGlobalGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is required only if the platform
|
||
|
|
is a IEEE 802.11 AP/repeater or bridge."
|
||
|
|
|
||
|
|
::= { ciscoDot11AssocMIBCompliances 3 }
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBComplianceRev3 MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated -- by ciscoDot11AssocMIBComplianceRev4
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for this
|
||
|
|
ciscoDot11AssociationMIB module."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ciscoDot11ClientConfigGroup,
|
||
|
|
ciscoDot11ClientAuthenGroup,
|
||
|
|
ciscoDot11ClientStatGroup,
|
||
|
|
ciscoDot11ClientInfoGroup,
|
||
|
|
ciscoDot11IfAssocStatGroup,
|
||
|
|
ciscoDot11IfCipherStatGroup
|
||
|
|
}
|
||
|
|
GROUP ciscoDot11ApAssocGlobalGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is required only if the platform
|
||
|
|
is a IEEE 802.11 AP/repeater or bridge."
|
||
|
|
|
||
|
|
::= { ciscoDot11AssocMIBCompliances 4 }
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBComplianceRev4 MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for this
|
||
|
|
ciscoDot11AssociationMIB module."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ciscoDot11ClientConfigGroup,
|
||
|
|
ciscoDot11ClientAuthenGroup,
|
||
|
|
ciscoDot11ClientStatGroup,
|
||
|
|
ciscoDot11ClientInfoGroup,
|
||
|
|
ciscoDot11IfAssocStatGroup,
|
||
|
|
ciscoDot11IfCipherStatGroup,
|
||
|
|
ciscoDot11ClientConfigExtGroup
|
||
|
|
}
|
||
|
|
GROUP ciscoDot11ApAssocGlobalGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is required only if the platform
|
||
|
|
is a IEEE 802.11 AP/repeater or bridge."
|
||
|
|
|
||
|
|
::= { ciscoDot11AssocMIBCompliances 5 }
|
||
|
|
|
||
|
|
ciscoDot11AssocMIBComplianceRev5 MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for this
|
||
|
|
ciscoDot11AssociationMIB module."
|
||
|
|
MODULE
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
ciscoDot11ClientConfigGroup,
|
||
|
|
ciscoDot11ClientAuthenGroup,
|
||
|
|
ciscoDot11ClientStatGroup,
|
||
|
|
ciscoDot11ClientInfoGroup,
|
||
|
|
ciscoDot11IfAssocStatGroup,
|
||
|
|
ciscoDot11IfCipherStatGroup,
|
||
|
|
ciscoDot11ClientConfigExtGroup,
|
||
|
|
ciscoDot11ClientNewAuthenGroup
|
||
|
|
}
|
||
|
|
GROUP ciscoDot11ApAssocGlobalGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is required only if the platform
|
||
|
|
is a IEEE 802.11 AP/repeater or bridge."
|
||
|
|
|
||
|
|
::= { ciscoDot11AssocMIBCompliances 6 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* Units of conformance
|
||
|
|
--********************************************************************
|
||
|
|
|
||
|
|
ciscoDot11AssocGlobalGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ParentAddress,
|
||
|
|
cDot11ActiveWirelessClients,
|
||
|
|
cDot11ActiveBridges,
|
||
|
|
cDot11ActiveRepeaters,
|
||
|
|
cDot11AssStatsAssociated,
|
||
|
|
cDot11AssStatsAuthenticated,
|
||
|
|
cDot11AssStatsRoamedIn,
|
||
|
|
cDot11AssStatsRoamedAway,
|
||
|
|
cDot11AssStatsDeauthenticated,
|
||
|
|
cDot11AssStatsDisassociated
|
||
|
|
}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the device association information group.
|
||
|
|
This is deprecated in favor of the
|
||
|
|
ciscoDot11IfAssocStatGroup."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 1 }
|
||
|
|
|
||
|
|
ciscoDot11ClientConfigGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ClientParentAddress,
|
||
|
|
cDot11ClientRoleClassType,
|
||
|
|
cDot11ClientDevType,
|
||
|
|
cDot11ClientRadioType,
|
||
|
|
cDot11ClientWepEnabled,
|
||
|
|
cDot11ClientWepKeyMixEnabled,
|
||
|
|
cDot11ClientMicEnabled,
|
||
|
|
cDot11ClientPowerSaveMode,
|
||
|
|
cDot11ClientAid,
|
||
|
|
cDot11ClientDataRateSet
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the client configuration information group."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 2 }
|
||
|
|
|
||
|
|
ciscoDot11ClientStatGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ClientCurrentTxRateSet,
|
||
|
|
cDot11ClientUpTime,
|
||
|
|
cDot11ClientSignalStrength,
|
||
|
|
cDot11ClientSigQuality,
|
||
|
|
cDot11ClientPacketsReceived,
|
||
|
|
cDot11ClientBytesReceived,
|
||
|
|
cDot11ClientPacketsSent,
|
||
|
|
cDot11ClientBytesSent,
|
||
|
|
cDot11ClientAgingLeft,
|
||
|
|
cDot11ClientDuplicates,
|
||
|
|
cDot11ClientMsduRetries,
|
||
|
|
cDot11ClientMsduFails,
|
||
|
|
cDot11ClientWepErrors,
|
||
|
|
cDot11ClientMicErrors,
|
||
|
|
cDot11ClientMicMissingFrames
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is the client statistics group."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 3 }
|
||
|
|
|
||
|
|
ciscoDot11ClientInfoGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ClientSoftwareVersion,
|
||
|
|
cDot11ClientName,
|
||
|
|
cDot11ClientAssociationState,
|
||
|
|
cDot11ClientIpAddressType,
|
||
|
|
cDot11ClientIpAddress
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group provides additional client specific
|
||
|
|
information."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 4 }
|
||
|
|
|
||
|
|
ciscoDot11ApAssocGlobalGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ParentAddress
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group includes per AP or bridge global
|
||
|
|
configuration information."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 5 }
|
||
|
|
|
||
|
|
ciscoDot11IfAssocStatGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ActiveWirelessClients,
|
||
|
|
cDot11ActiveBridges,
|
||
|
|
cDot11ActiveRepeaters,
|
||
|
|
cDot11AssStatsAssociated,
|
||
|
|
cDot11AssStatsAuthenticated,
|
||
|
|
cDot11AssStatsRoamedIn,
|
||
|
|
cDot11AssStatsRoamedAway,
|
||
|
|
cDot11AssStatsDeauthenticated,
|
||
|
|
cDot11AssStatsDisassociated
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group includes per IEEE 802.11 radio
|
||
|
|
interface association statistics."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 6 }
|
||
|
|
|
||
|
|
ciscoDot11IfCipherStatGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cd11IfCipherMicFailClientAddress,
|
||
|
|
cd11IfCipherTkipLocalMicFailures,
|
||
|
|
cd11IfCipherTkipRemotMicFailures,
|
||
|
|
cd11IfCipherTkipCounterMeasInvok,
|
||
|
|
cd11IfCipherCcmpReplaysDiscarded,
|
||
|
|
cd11IfCipherTkipReplaysDetected
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group includes per IEEE 802.11 radio
|
||
|
|
interface cipher related statistics collected."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 7 }
|
||
|
|
|
||
|
|
ciscoDot11ClientAuthenGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ClientVlanId,
|
||
|
|
cDot11ClientSubIfIndex,
|
||
|
|
cDot11ClientAuthenAlgorithm,
|
||
|
|
cDot11ClientAdditionalAuthen,
|
||
|
|
cDot11ClientDot1xAuthenAlgorithm,
|
||
|
|
cDot11ClientKeyManagement,
|
||
|
|
cDot11ClientUnicastCipher,
|
||
|
|
cDot11ClientMulticastCipher
|
||
|
|
}
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"This group includes per IEEE 802.11 radio
|
||
|
|
interface cipher related statistics collected."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 8 }
|
||
|
|
|
||
|
|
ciscoDot11ClientConfigExtGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ClientDevObjectID
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group provides more configuration
|
||
|
|
information about a particular associated 802.11
|
||
|
|
client. "
|
||
|
|
::= { ciscoDot11AssocMIBGroups 9 }
|
||
|
|
|
||
|
|
ciscoDot11ClientNewAuthenGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cDot11ClientNewKeyManagement
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group includes per IEEE 802.11 radio
|
||
|
|
interface cipher related statistics collected."
|
||
|
|
::= { ciscoDot11AssocMIBGroups 10 }
|
||
|
|
|
||
|
|
--********************************************************************
|
||
|
|
--* End of units of conformance
|
||
|
|
--********************************************************************
|
||
|
|
|
||
|
|
END
|
||
|
|
|