682 lines
24 KiB
Plaintext
682 lines
24 KiB
Plaintext
|
-- *****************************************************************
|
||
|
|
-- CISCO-ENHANCED-IMAGE-MIB.my
|
||
|
|
--
|
||
|
|
-- September 2001, Narayana Pai H.
|
||
|
|
-- Jan 2005, Adithya R Sesani
|
||
|
|
--
|
||
|
|
-- Copyright (c) 2001-2005 by cisco Systems, Inc.
|
||
|
|
-- All rights reserved.
|
||
|
|
--
|
||
|
|
-- *****************************************************************
|
||
|
|
|
||
|
|
CISCO-ENHANCED-IMAGE-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE,
|
||
|
|
Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
SnmpAdminString
|
||
|
|
FROM SNMP-FRAMEWORK-MIB
|
||
|
|
DateAndTime,
|
||
|
|
TruthValue,
|
||
|
|
RowStatus,
|
||
|
|
TEXTUAL-CONVENTION
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
MODULE-COMPLIANCE,
|
||
|
|
OBJECT-GROUP
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
ciscoMgmt
|
||
|
|
FROM CISCO-SMI
|
||
|
|
PhysicalIndex,
|
||
|
|
entPhysicalIndex
|
||
|
|
FROM ENTITY-MIB
|
||
|
|
CeImageInstallableStatus,
|
||
|
|
CeImageInstallableType
|
||
|
|
FROM CISCO-IMAGE-TC;
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200501060000Z"
|
||
|
|
ORGANIZATION "Cisco Systems, Inc."
|
||
|
|
CONTACT-INFO
|
||
|
|
"Cisco Systems
|
||
|
|
Customer Service
|
||
|
|
|
||
|
|
Postal: 170 W Tasman Drive
|
||
|
|
San Jose, CA 95134
|
||
|
|
USA
|
||
|
|
|
||
|
|
Tel: +1 800 553-NETS
|
||
|
|
|
||
|
|
E-mail: cs-core-mibs@cisco.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB provides information about images running
|
||
|
|
on the system. It has been extended to be useful
|
||
|
|
for modular operating systems.
|
||
|
|
|
||
|
|
The image table provides information about currently
|
||
|
|
running image on the system. A modular operating
|
||
|
|
system image consists of base image and all the
|
||
|
|
installables loaded on the base image. A base image
|
||
|
|
can be obtained from ceImageTable and all the
|
||
|
|
installables installed on this image can be obtained
|
||
|
|
using ceImageInstallableTable.
|
||
|
|
|
||
|
|
Glossary:
|
||
|
|
|
||
|
|
Base Image
|
||
|
|
Essential part of the operating system,
|
||
|
|
which forms base functionality on top of
|
||
|
|
which patches can be added.
|
||
|
|
|
||
|
|
MBI (Minimum bootable image)
|
||
|
|
A small image which contains the smallest
|
||
|
|
possible amount of functionality required to
|
||
|
|
bootstrap and load a full image. This image
|
||
|
|
typically contains the kernel, the file system
|
||
|
|
drivers, and some hardware initialization code.
|
||
|
|
It is executed at boot-up, and initializes just
|
||
|
|
enough to access the rest of the code, and
|
||
|
|
run it.
|
||
|
|
|
||
|
|
Modular operating system
|
||
|
|
An operating system that exhibits runtime
|
||
|
|
modularity characteristics, such as multiple
|
||
|
|
address spaces, fault isolation between
|
||
|
|
processes, and modularity delivery and
|
||
|
|
replacement of image components.
|
||
|
|
|
||
|
|
Patch/Package/SMU (software maintenance upgrade)
|
||
|
|
A modular replacement for some piece of on-box
|
||
|
|
content, such as a binary shared object, or a text
|
||
|
|
file. This entity is meant to replace or augment
|
||
|
|
something that is already part of the base image.
|
||
|
|
|
||
|
|
Composite package
|
||
|
|
Group of packages delivered as a bundle. It is
|
||
|
|
meant to be loaded on MBI.
|
||
|
|
|
||
|
|
Script
|
||
|
|
A non-binary piece of on-box content, typically a
|
||
|
|
TCL script for use by the TCL interpreter, or
|
||
|
|
some other form of interpreted router content.
|
||
|
|
|
||
|
|
Installable
|
||
|
|
An installable can be a patch, package, composite
|
||
|
|
package, SMU or script. It is a piece of
|
||
|
|
software which can be loaded on to the base
|
||
|
|
image on a system.
|
||
|
|
|
||
|
|
Location
|
||
|
|
This term is used in this MIB to represent path
|
||
|
|
where operating system image is located. It is
|
||
|
|
the way of describing where on the file system
|
||
|
|
the installed software is located. Modular
|
||
|
|
operating system image consists of base image
|
||
|
|
and installables loaded on this base image.
|
||
|
|
|
||
|
|
Tag
|
||
|
|
Tag is a virtual label placed by user that
|
||
|
|
indicates a point deemed to be stable. It can be
|
||
|
|
used to rollback to a system after an install
|
||
|
|
that negatively impacted the functionality of the
|
||
|
|
system. It gives points in system where user can
|
||
|
|
go back to, to remove installables installed
|
||
|
|
after that point of time.
|
||
|
|
"
|
||
|
|
REVISION "200501060000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB has been extended to be useful for modular
|
||
|
|
operating systems.
|
||
|
|
|
||
|
|
Added tables ceImageLocationTable, ceImageTagTable,
|
||
|
|
ceImageInstallableTable. They are applicable to modular
|
||
|
|
operating systems and provide information about the
|
||
|
|
operating system software installed on the system.
|
||
|
|
"
|
||
|
|
REVISION "200202280000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version of the MIB. This MIB has Image table
|
||
|
|
containing the following information related to the
|
||
|
|
running OS image
|
||
|
|
1. Entity Index
|
||
|
|
2. The image name
|
||
|
|
3. Family
|
||
|
|
4. Feature set
|
||
|
|
5. Version
|
||
|
|
6. Media and
|
||
|
|
7. Description
|
||
|
|
This MIB deprecates the objects in the CISCO-IMAGE-MIB.
|
||
|
|
"
|
||
|
|
::= { ciscoMgmt 249 }
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIBObjects OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIB 1 }
|
||
|
|
|
||
|
|
ceImage OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIBObjects 1 }
|
||
|
|
ceImageInstallable OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIBObjects 2 }
|
||
|
|
ceImageTags OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIBObjects 3 }
|
||
|
|
|
||
|
|
-- Textual Convention
|
||
|
|
|
||
|
|
MediaType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This TC describes the media type on which the
|
||
|
|
image is loaded and is running from.
|
||
|
|
|
||
|
|
This is not the secondary storage device from
|
||
|
|
which the image is loaded. The storage device
|
||
|
|
from which the image is loaded is part of the
|
||
|
|
image name (ceImageName)."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ram (1), -- The image is in RAM
|
||
|
|
rom (2), -- The image is in ROM
|
||
|
|
other (3) -- The image is in unknown media
|
||
|
|
}
|
||
|
|
|
||
|
|
-- Image Table
|
||
|
|
|
||
|
|
ceImageTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CeImageEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table provides information describing the
|
||
|
|
executing image.
|
||
|
|
|
||
|
|
For modular operating systems this table provides
|
||
|
|
base image or MBI.
|
||
|
|
"
|
||
|
|
::= { ceImage 1 }
|
||
|
|
|
||
|
|
ceImageEntry OBJECT-TYPE
|
||
|
|
SYNTAX CeImageEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An image characteristic entry."
|
||
|
|
INDEX { ceImageIndex }
|
||
|
|
::= { ceImageTable 1 }
|
||
|
|
|
||
|
|
|
||
|
|
CeImageEntry ::=
|
||
|
|
SEQUENCE {
|
||
|
|
ceImageIndex PhysicalIndex,
|
||
|
|
ceImageName SnmpAdminString,
|
||
|
|
ceImageFamily SnmpAdminString,
|
||
|
|
ceImageFeature SnmpAdminString,
|
||
|
|
ceImageVersion SnmpAdminString,
|
||
|
|
ceImageMedia MediaType,
|
||
|
|
ceImageDescription SnmpAdminString
|
||
|
|
}
|
||
|
|
|
||
|
|
ceImageIndex OBJECT-TYPE
|
||
|
|
SYNTAX PhysicalIndex
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The entPhysicalIndex from the ENTITY-MIB of
|
||
|
|
the physical entity that runs this OS image."
|
||
|
|
::= { ceImageEntry 1 }
|
||
|
|
|
||
|
|
ceImageName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Name of the running OS image. This will also
|
||
|
|
include the path from where the image is loaded.
|
||
|
|
For example, flash:c3640-is-mz."
|
||
|
|
::= { ceImageEntry 2 }
|
||
|
|
|
||
|
|
ceImageFamily OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Family of the running OS image. The image family
|
||
|
|
indicates the platform for which the image is built.
|
||
|
|
Examples of image families -
|
||
|
|
are C3640, C7200 etc."
|
||
|
|
::= { ceImageEntry 3 }
|
||
|
|
|
||
|
|
ceImageFeature OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Feature set supported on this image. Examples of
|
||
|
|
feature set are -
|
||
|
|
ENTERPRISE, PROVIDER etc."
|
||
|
|
::= { ceImageEntry 4 }
|
||
|
|
|
||
|
|
ceImageVersion OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Version of the running OS image."
|
||
|
|
::= { ceImageEntry 5 }
|
||
|
|
|
||
|
|
ceImageMedia OBJECT-TYPE
|
||
|
|
SYNTAX MediaType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Media on which the image represented by this
|
||
|
|
entry is running."
|
||
|
|
::= { ceImageEntry 6 }
|
||
|
|
|
||
|
|
ceImageDescription OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Description of running OS image."
|
||
|
|
::= { ceImageEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
ceImageLocationTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CeImageLocationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table is applicable to modular operating systems.
|
||
|
|
A location describes where on the file system the installed
|
||
|
|
software is placed. This table consists of list of all
|
||
|
|
locations along with status of image at that location.
|
||
|
|
ceImageLocationRunningStatus will be true only for the
|
||
|
|
location from where system is currently operational.
|
||
|
|
|
||
|
|
The agent may add entries to this table when a new image is
|
||
|
|
installed on the system. The agent may delete entries from
|
||
|
|
this table when an image has been removed from the system.
|
||
|
|
"
|
||
|
|
::= { ceImageInstallable 1 }
|
||
|
|
|
||
|
|
ceImageLocationEntry OBJECT-TYPE
|
||
|
|
SYNTAX CeImageLocationEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry provides location of an image,
|
||
|
|
status of the image."
|
||
|
|
INDEX { entPhysicalIndex, ceImageLocationIndex }
|
||
|
|
::= { ceImageLocationTable 1 }
|
||
|
|
|
||
|
|
CeImageLocationEntry ::= SEQUENCE {
|
||
|
|
ceImageLocationIndex Unsigned32,
|
||
|
|
ceImageLocation SnmpAdminString,
|
||
|
|
ceImageLocationRunningStatus TruthValue
|
||
|
|
}
|
||
|
|
|
||
|
|
ceImageLocationIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An integer that uniquely identifies a location.
|
||
|
|
It is allocated by the system and is unique per location."
|
||
|
|
::= { ceImageLocationEntry 1 }
|
||
|
|
|
||
|
|
ceImageLocation OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Location where the operating system is installed on the
|
||
|
|
system. This is path specifying the directory where
|
||
|
|
installables can be found."
|
||
|
|
::= { ceImageLocationEntry 2 }
|
||
|
|
|
||
|
|
ceImageLocationRunningStatus OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object will have value of true if the image from this
|
||
|
|
location is currently running on the system. For example
|
||
|
|
status will be 'true' for the location disk0:/sys, if the
|
||
|
|
system currently has image installed from this location."
|
||
|
|
::= { ceImageLocationEntry 3 }
|
||
|
|
|
||
|
|
|
||
|
|
ceImageInstallableTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CeImageInstallableEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This table specifies a list of software installables
|
||
|
|
installed on the system.
|
||
|
|
|
||
|
|
This table will be applicable to operating systems which
|
||
|
|
support installables. A modular operating system can
|
||
|
|
consist of base image or MBI and installables.
|
||
|
|
|
||
|
|
The value of ceImageLocationIndex can be used as index to
|
||
|
|
retrieve installables installed at a particular location.
|
||
|
|
|
||
|
|
Every image will have a table of installables. Entries are
|
||
|
|
added in this table when an installable is installed on the
|
||
|
|
image. Entries are deleted from this table when installables
|
||
|
|
are removed or rolled back from the image.
|
||
|
|
"
|
||
|
|
::= { ceImageInstallable 2 }
|
||
|
|
|
||
|
|
ceImageInstallableEntry OBJECT-TYPE
|
||
|
|
SYNTAX CeImageInstallableEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry provides information about the installed
|
||
|
|
software."
|
||
|
|
INDEX {
|
||
|
|
entPhysicalIndex,
|
||
|
|
ceImageLocationIndex,
|
||
|
|
ceImageInstallableIndex
|
||
|
|
}
|
||
|
|
::= { ceImageInstallableTable 1 }
|
||
|
|
|
||
|
|
CeImageInstallableEntry ::= SEQUENCE {
|
||
|
|
ceImageInstallableIndex Unsigned32,
|
||
|
|
ceImageInstallableType CeImageInstallableType,
|
||
|
|
ceImageInstallableName SnmpAdminString,
|
||
|
|
ceImageInstallableStatus CeImageInstallableStatus,
|
||
|
|
ceImageInstallableMajorVerNumber Unsigned32,
|
||
|
|
ceImageInstallableMinorVerNumber Unsigned32,
|
||
|
|
ceImageInstallableRevisionVerNum SnmpAdminString,
|
||
|
|
ceImageInstallableDate DateAndTime,
|
||
|
|
ceImageInstallableRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
ceImageInstallableIndex OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An integer that uniquely identifies an installable.
|
||
|
|
It is allocated by the system and is unique per an
|
||
|
|
installable entry."
|
||
|
|
::= { ceImageInstallableEntry 1 }
|
||
|
|
|
||
|
|
ceImageInstallableType OBJECT-TYPE
|
||
|
|
SYNTAX CeImageInstallableType
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of the software package."
|
||
|
|
::= { ceImageInstallableEntry 2 }
|
||
|
|
|
||
|
|
ceImageInstallableName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the installable."
|
||
|
|
::= { ceImageInstallableEntry 3 }
|
||
|
|
|
||
|
|
ceImageInstallableStatus OBJECT-TYPE
|
||
|
|
SYNTAX CeImageInstallableStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the software installable."
|
||
|
|
::= { ceImageInstallableEntry 4 }
|
||
|
|
|
||
|
|
ceImageInstallableMajorVerNumber OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Major version number of the software installable.
|
||
|
|
Version is represented as major.minor.maintaince
|
||
|
|
For example, 12 will be major number for version
|
||
|
|
12.3(18.1)S"
|
||
|
|
::= { ceImageInstallableEntry 5 }
|
||
|
|
|
||
|
|
ceImageInstallableMinorVerNumber OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Minor version number of the software installable.
|
||
|
|
For example, minor number for the version 12.3(18.1)S
|
||
|
|
is 3."
|
||
|
|
::= { ceImageInstallableEntry 6 }
|
||
|
|
|
||
|
|
ceImageInstallableRevisionVerNum OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Maintenance version string of the software installable.
|
||
|
|
This string represents incremental change in the image
|
||
|
|
over the minor release number. For example, revision
|
||
|
|
number for the version 12.3(18.1)S is (18.1)S.
|
||
|
|
"
|
||
|
|
::= { ceImageInstallableEntry 7 }
|
||
|
|
|
||
|
|
ceImageInstallableDate OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Date and time software was installed
|
||
|
|
on the system."
|
||
|
|
::= { ceImageInstallableEntry 8 }
|
||
|
|
|
||
|
|
ceImageInstallableRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this conceptual row. This object is used to
|
||
|
|
manage creation, and deletion of rows in this table.
|
||
|
|
|
||
|
|
When the row is active, installablestatus object may be
|
||
|
|
modified to activate the installable.
|
||
|
|
"
|
||
|
|
::= { ceImageInstallableEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
ceImageTagTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CeImageTagEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A tag is a virtual label placed by user that indicates a
|
||
|
|
point deemed to be stable. It can be used to rollback to
|
||
|
|
a system after an install that negatively impacts the
|
||
|
|
functionality of the system. It gives point in system
|
||
|
|
where user can go back to, to remove installables
|
||
|
|
installed after that point of time.
|
||
|
|
|
||
|
|
When a tag is placed on an image an entry appears in
|
||
|
|
this table. An entry is removed from this table when
|
||
|
|
tag is removed from the system. The value of
|
||
|
|
ceImageLocationIndex is used as index to get all the tags
|
||
|
|
that are placed on the image at this location.
|
||
|
|
"
|
||
|
|
::= { ceImageTags 1 }
|
||
|
|
|
||
|
|
ceImageTagEntry OBJECT-TYPE
|
||
|
|
SYNTAX CeImageTagEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry consists of information about a committed tag.
|
||
|
|
"
|
||
|
|
INDEX {
|
||
|
|
entPhysicalIndex,
|
||
|
|
ceImageLocationIndex,
|
||
|
|
ceImageTagName
|
||
|
|
}
|
||
|
|
::= { ceImageTagTable 1 }
|
||
|
|
|
||
|
|
CeImageTagEntry ::= SEQUENCE {
|
||
|
|
ceImageTagName SnmpAdminString,
|
||
|
|
ceImageTagListofInstIndex SnmpAdminString,
|
||
|
|
ceImageTagDate DateAndTime,
|
||
|
|
ceImageTagRowStatus RowStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
ceImageTagName OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The name of the tag."
|
||
|
|
::= { ceImageTagEntry 1 }
|
||
|
|
|
||
|
|
ceImageTagListofInstIndex OBJECT-TYPE
|
||
|
|
SYNTAX SnmpAdminString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"List of all the installables which are committed
|
||
|
|
using this tag. Installables are represented
|
||
|
|
using installable index and each index is saperated
|
||
|
|
by a space."
|
||
|
|
::= { ceImageTagEntry 2 }
|
||
|
|
|
||
|
|
ceImageTagDate OBJECT-TYPE
|
||
|
|
SYNTAX DateAndTime
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Date and time this tag was committed."
|
||
|
|
::= { ceImageTagEntry 3 }
|
||
|
|
|
||
|
|
ceImageTagRowStatus OBJECT-TYPE
|
||
|
|
SYNTAX RowStatus
|
||
|
|
MAX-ACCESS read-create
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of this conceptual row. This object is used to
|
||
|
|
manage creation, and deletion of rows in this table.
|
||
|
|
"
|
||
|
|
::= { ceImageTagEntry 4 }
|
||
|
|
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Conformance
|
||
|
|
--
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIBConformance OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIB 3 }
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIBCompliances OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIBConformance 1 }
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIBGroups OBJECT IDENTIFIER
|
||
|
|
::= { ciscoEnhancedImageMIBConformance 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Compliance
|
||
|
|
--
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated -- By
|
||
|
|
-- ceImageMibComplianceRev1
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for entities which implement
|
||
|
|
the CISCO-ENHANCED-IMAGE-MIB."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS { ciscoEnhancedImageMIBGroup }
|
||
|
|
::= { ciscoEnhancedImageMIBCompliances 1 }
|
||
|
|
|
||
|
|
ceImageMIBComplianceRev1 MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for entities which implement
|
||
|
|
the CISCO-ENHANCED-IMAGE-MIB."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS { ciscoEnhancedImageMIBGroup }
|
||
|
|
|
||
|
|
GROUP ceImageLocationMIBGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is optional.
|
||
|
|
Only applicable to modular operating systems.
|
||
|
|
This group provides information about locations where
|
||
|
|
images and installables are located on the system."
|
||
|
|
GROUP ceImageInstallableMIBGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is optional.
|
||
|
|
Only applicable to modular operating systems.
|
||
|
|
This group provides information about Installables
|
||
|
|
loaded on the systems and their current state."
|
||
|
|
|
||
|
|
GROUP ceImageTagMIBGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"This group is optional.
|
||
|
|
Only applicable to modular operating systems.
|
||
|
|
This group provides information about tags committed on
|
||
|
|
the system and number of files committed under a tag."
|
||
|
|
|
||
|
|
::= { ciscoEnhancedImageMIBCompliances 2 }
|
||
|
|
|
||
|
|
--
|
||
|
|
-- Units of Conformance
|
||
|
|
--
|
||
|
|
|
||
|
|
ciscoEnhancedImageMIBGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ceImageName,
|
||
|
|
ceImageFamily,
|
||
|
|
ceImageFeature,
|
||
|
|
ceImageVersion,
|
||
|
|
ceImageMedia,
|
||
|
|
ceImageDescription
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of objects providing OS image
|
||
|
|
characteristics."
|
||
|
|
::= { ciscoEnhancedImageMIBGroups 1 }
|
||
|
|
|
||
|
|
ceImageLocationMIBGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ceImageLocation,
|
||
|
|
ceImageLocationRunningStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of objects providing information about
|
||
|
|
location of Installable Images on the system."
|
||
|
|
::= { ciscoEnhancedImageMIBGroups 2 }
|
||
|
|
|
||
|
|
ceImageInstallableMIBGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ceImageInstallableType,
|
||
|
|
ceImageInstallableName,
|
||
|
|
ceImageInstallableStatus,
|
||
|
|
ceImageInstallableMajorVerNumber,
|
||
|
|
ceImageInstallableMinorVerNumber,
|
||
|
|
ceImageInstallableRevisionVerNum,
|
||
|
|
ceImageInstallableDate,
|
||
|
|
ceImageInstallableRowStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of objects providing
|
||
|
|
Operating system image and installables."
|
||
|
|
::= { ciscoEnhancedImageMIBGroups 3 }
|
||
|
|
|
||
|
|
ceImageTagMIBGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
ceImageTagListofInstIndex,
|
||
|
|
ceImageTagDate,
|
||
|
|
ceImageTagRowStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A collection of objects providing information about
|
||
|
|
tags committed to the operating system image"
|
||
|
|
::= { ciscoEnhancedImageMIBGroups 4 }
|
||
|
|
|
||
|
|
END
|