david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-ENTITY-DIAG-MIB

2219 lines
77 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-ENTITY-DIAG-MIB
-- Definitions of managed objects supporting the Online
-- Diagnostic Feature
--
-- November 2002, Patrick Gili
-- October 2005, Jayakumar Kadirvelu
--
-- Copyright (c) 2002-2010, 2016 by Cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-ENTITY-DIAG-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-GROUP,
MODULE-COMPLIANCE,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
Unsigned32,
Gauge32,
Integer32,
Counter32,
OBJECT-TYPE,
MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
entPhysicalIndex,
PhysicalIndex,
entPhysicalDescr
FROM ENTITY-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
DateAndTime,
TruthValue,
RowStatus
FROM SNMPv2-TC
EntPhysicalIndexOrZero
FROM CISCO-TC
CeDiagDiagnosticLevel,
CeDiagDiagnosticMethod,
CeDiagTestIdentifier,
CeDiagErrorIdentifier,
CeDiagErrorIdentifierOrZero,
CeDiagJobIdentifier,
CeDiagPortList,
CeDiagTestList,
CeDiagJobSuite
FROM CISCO-ENTITY-DIAG-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoEntityDiagMIB MODULE-IDENTITY
LAST-UPDATED "201603110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"This MIB module defines the managed objects that describe the
online diagnostics capabilities supported by the
physical entities contained by the system, including chassis,
modules, ports, power supplies, fans, and sensors. In order to
manage the online diagnostic capabilities supported by
a physical entity, it must be represented by a conceptual row
in the entPhysicalTable of the ENTITY-MIB (RFC-2737).
GLOSSARY
Boot-up Diagnostic - a diagnostic consisting of tests intended
to be executed in a reasonable timeframe when a physical entity
boots.
Diagnostic - a suite of tests intended to exercise the
functional integrity of a physical entity.
Diagnostic Level - the degree of completeness that a diagnostic
will exercise a physical entity.
Field Diagnostic - a special suite of tests intended to
exercise the functional integrity of a physical entity in a
manner that is possible when a physical entity is
operational or running an operational image.
Field Diagnostic Image - an image supporting field diagnostics.
A physical entity has to be loaded with a field diagnostic
image before field diagnostics can be executed on the physical
entity.
Health Monitoring - the process of running special
non-intrusive online tests periodically on a physical entity
for the purpose of tracking the overall condition of a physical
entity.
On-Demand Diagnostic - a diagnostic intended to be executed
immediately upon request.
Offline Diagnostic - a diagnostic that consists of tests that
are disruptive in nature, and thus requires the physical entity
being evaluated to be taken offline for the duration.
Online Diagnostic - a diagnostic that consists of tests that
are not disruptive in nature, and thus can be done without
taking the physical entity offline.
Physical Entity - an identifiable physical resource, such as a
chassis, line card, power supply, or communication port. See
RFC-2737, 'Entity MIB (Version 2)', K. McCloghrie and A.
Bierman.
Scheduled Diagnostic - a diagnostic intended to execute at some
time in the future. There exist two types of scheduled
diagnostics: 1) one-shot, which execute only once; and 2)
periodic, which executes at a specific interval.
Test - an exercise intended to determine the functional
integrity of a component comprising a physical entity (e.g., a
port might support an internal loopback test).
Diagnostic Job - Consists of a diagnostic suite
(i.e., a collection of tests) to be executed by a physical
entity."
REVISION "201603110000Z"
DESCRIPTION
"Added one new enumaration value disruptive(15)
to ceDiagTestAttributes"
REVISION "201005260000Z"
DESCRIPTION
"Added ceDiagHMTestThreshWindowGroup."
REVISION "200906300000Z"
DESCRIPTION
"Added ceDiagTestPerfLastTestMethodGroup.
Updated Description of ceDiagTestPerfLastErrorID object."
REVISION "200803120000Z"
DESCRIPTION
"Added ceDiagNotifControlGroup, ceDiagNotifErrorMsgGroup
and ceDiagNotificationGroup."
REVISION "200701090000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ciscoMgmt 350 }
ciscoEntityDiagMIBNotifs OBJECT IDENTIFIER
::= { ciscoEntityDiagMIB 0 }
ciscoEntityDiagMIBObjects OBJECT IDENTIFIER
::= { ciscoEntityDiagMIB 1 }
ciscoEntityDiagMIBConform OBJECT IDENTIFIER
::= { ciscoEntityDiagMIB 2 }
ceDiagDescriptions OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 1 }
ceDiagGlobalConfig OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 2 }
ceDiagEntity OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 3 }
ceDiagOnDemand OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 4 }
ceDiagScheduled OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 5 }
ceDiagTest OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 6 }
ceDiagHealthMonitor OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 7 }
ceDiagEvents OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 8 }
ceDiagNotificationControl OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBObjects 9 }
-- DiagDescriptions
ceDiagTestInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagTestInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the tests supported by each physical
entity supporting online diagnostics. The table
organizes tests into sets associated with the physical entity
supporting those tests.
The SNMP entity adds a set of tests corresponding to a physical
entity upon detection of a physical entity supporting
online diagnostics.
The SNMP entity deletes a set of tests corresponding to a
physical entity upon removal of the physical entity.
The SNMP entity replaces a set of tests corresponding to a
physical entity when the physical entity has been successfully
loaded with a different image (e.g., the field diagnostic
image)."
::= { ceDiagDescriptions 1 }
ceDiagTestInfoEntry OBJECT-TYPE
SYNTAX CeDiagTestInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description of a single test supported by a corresponding
physical entity."
INDEX {
entPhysicalIndex,
ceDiagTestId
}
::= { ceDiagTestInfoTable 1 }
CeDiagTestInfoEntry ::= SEQUENCE {
ceDiagTestId CeDiagTestIdentifier,
ceDiagTestText SnmpAdminString,
ceDiagTestAttributes BITS
}
ceDiagTestId OBJECT-TYPE
SYNTAX CeDiagTestIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary positive integer
arbitrarily identifying the test."
::= { ceDiagTestInfoEntry 1 }
ceDiagTestText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates a human-readable description of the
test. Examples include:
'Marching Pattern DRAM Test'
'Data Pins DRAM Test'
'Internal Loopback Test'
'External Loopback Test'"
::= { ceDiagTestInfoEntry 2 }
ceDiagTestAttributes OBJECT-TYPE
SYNTAX BITS {
minimal(0),
complete(1),
perPort(2),
fatal(3),
basicOnDemand(4),
standby(5),
parallel(6),
nonDisruptive(7),
hmAlwaysEnable(8),
hmFixedInterval(9),
nonHM(10),
proxy(11),
activeToStandby(12),
offline(13),
perDevice(14),
disruptive(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates a set of attributes characterizing the
test:
'minimal' - indicates that this test will be executed
during boot-up if ceDiagBootupLevel is set
to 'minimal' or 'complete'. This test is
also included in the minimal or complete
test suites.
'complete' - indicates that this test will be executed
during boot-up if ceDiagBootupLevel is set
to 'complete'. This test is also included
in the complete test suites.
'perPort' - indicates that this test is a executed for
each port contained by the module. This
test is also included in the perPort test
suites.
'fatal' - indicates that if this test fails, then the
diagnostic should fail indicating that a
major error occurred.
'basicOnDemand' - indicates that this test will be
run during the basic on demand job is run.
'standby' - indicates that this test can only be run
if the physical entity is a standby unit
and can only be executed from the standby
unit.
'parallel' - indicates that this test can be executed in
parallel with other tests without checking
for resource availability.
'nonDisruptive' - indicates this test can be executed without
disrupting the physical entity's normal
operation. This test is also included in
the nonDisruptive test suites.
'hmAlwaysEnabled' - indicates that a management application can
not disable the use of this test for the
purpose of health monitoring.
'hmFixedInterval' - indicates that a management application can
not change the interval at which health
monitoring executes this test.
'nonHM' - indicates that this test can not be used for
health monitoring.
'proxy' - indicates that the test must be executed
through a proxy.
'activeToStandby' - indicates that this test can only be run if
the physical entity is a standby unit and
can only be executed from the active unit.
'offline' - indicates that this test will not get a user
confirmation when it is run.
'perDevice' - indicates that this test is a per device test.
'disruptive' - indicates that this test can be executed with
disrupting the physical entity's normal
operation. This test is also included in
the disruptive test suites."
::= { ceDiagTestInfoEntry 3 }
ceDiagTestCustomAttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagTestCustomAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the additional custom based attributes
of the tests listed in ceDiagTestInfoTable. These are attributes
which have been customized by the platform supporting the tests."
::= { ceDiagDescriptions 2 }
ceDiagTestCustomAttributeEntry OBJECT-TYPE
SYNTAX CeDiagTestCustomAttributeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description of a single custom based attribute for a test
supported by a corresponding physical entity."
INDEX {
entPhysicalIndex,
ceDiagTestId,
ceDiagTestCustomAttributeIndex
}
::= { ceDiagTestCustomAttributeTable 1 }
CeDiagTestCustomAttributeEntry ::= SEQUENCE {
ceDiagTestCustomAttributeIndex Unsigned32,
ceDiagTestCustomAttributeDesc SnmpAdminString
}
ceDiagTestCustomAttributeIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which identifies the custom based attribute
of a test."
::= { ceDiagTestCustomAttributeEntry 1 }
ceDiagTestCustomAttributeDesc OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides a textual description of the custom based
attribute of this test."
::= { ceDiagTestCustomAttributeEntry 2 }
ceDiagErrorInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagErrorInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the errors indicated by a system
supporting online diagnostics."
::= { ceDiagDescriptions 3 }
ceDiagErrorInfoEntry OBJECT-TYPE
SYNTAX CeDiagErrorInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description of a single online error."
INDEX { ceDiagErrorId }
::= { ceDiagErrorInfoTable 1 }
CeDiagErrorInfoEntry ::= SEQUENCE {
ceDiagErrorId CeDiagErrorIdentifier,
ceDiagErrorText SnmpAdminString
}
ceDiagErrorId OBJECT-TYPE
SYNTAX CeDiagErrorIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary positive integer
arbitrarily identifying the error."
::= { ceDiagErrorInfoEntry 1 }
ceDiagErrorText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates a human-readable description of the
error. Examples include:
'DIAG_SUCCESS'
'DIAG_FAILURE'
'DIAG_NOT_SUPPORT'
'DIAG_SKIPPED'"
::= { ceDiagErrorInfoEntry 2 }
-- DiagGlobalConfig
ceDiagBootupLevel OBJECT-TYPE
SYNTAX CeDiagDiagnosticLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the level that physical entities will
execute their boot-up diagnostic."
DEFVAL { minimal }
::= { ceDiagGlobalConfig 1 }
-- DiagEntity
ceDiagEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports online diagnostic control and
status for each physical entity that supporting the feature.
The SNMP entity adds a conceptual row to this table
corresponding to a physical entity upon detection of a physical
entity supporting online diagnostics.
The SNMP entity deletes a conceptual row from this table
corresponding to a physical entity upon removal of the physical
entity."
::= { ceDiagEntity 1 }
ceDiagEntityEntry OBJECT-TYPE
SYNTAX CeDiagEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Online diagnostic control and status for a single
physical entity supporting the feature. Observe that this data
may not be accurate if the corresponding cefcModuleOperStatus
(see the CISCO-ENTITY-FRU-CONTROL-MIB for further details) has
a value of 'boot'."
INDEX { entPhysicalIndex }
::= { ceDiagEntityTable 1 }
CeDiagEntityEntry ::= SEQUENCE {
ceDiagEntityBootLevel CeDiagDiagnosticLevel,
ceDiagEntityImageAdminStatus INTEGER,
ceDiagEntityImageOperStatus INTEGER,
ceDiagEntityFieldDiagnosticUrl SnmpAdminString
}
ceDiagEntityBootLevel OBJECT-TYPE
SYNTAX CeDiagDiagnosticLevel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the level that the physical entity
executed its boot-up diagnostic."
::= { ceDiagEntityEntry 1 }
ceDiagEntityImageAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
operational(1),
fieldDiagnostic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the desired image the physical entity
should be running:
'operational' - the physical entity should be running the
operational image.
'fieldDiagnostic' - the physical entity should be running the
field diagnostic image."
DEFVAL { operational }
::= { ceDiagEntityEntry 2 }
ceDiagEntityImageOperStatus OBJECT-TYPE
SYNTAX INTEGER {
operational(1),
fieldDiagnostic(2),
booting(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the actual image the physical entity is
running:
'operational' - the physical entity is running the
operational image.
'fieldDiagnostic' - the physical entity is running the field
diagnostic image.
'booting' - the physical entity is booting; that is,
there is no way of determining what image
the physical entity is running because it
is currently booting."
::= { ceDiagEntityEntry 3 }
ceDiagEntityFieldDiagnosticUrl OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a URL (see RFC-1630) that specifies the
location of the field diagnostic image. The following list
provides some examples of URLs for the field diagnostic:
file://disk0:/images/fd001
Describes a file with the path '/images/fd001' on 'disk0:'
accessed locally.
ftp://pop-server/usr/bin/fd001
Describes a file with the path '/usr/bin/fd001' on the host
'pop-server' accessed via FTP.
tftp://pop-server/tftpout/fd001
Describes a file with the path '/tftpout/fd001' on the host
'pop-server' accessed via TFTP."
REFERENCE
"RFC-1630, 'Universal Resource Identifiers in WWW', T.
Berners-Lee."
::= { ceDiagEntityEntry 4 }
ceDiagEntityCurrentTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagEntityCurrentTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the current test
executing on a physical entity."
::= { ceDiagEntity 2 }
ceDiagEntityCurrentTestEntry OBJECT-TYPE
SYNTAX CeDiagEntityCurrentTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A test which is currently executing on a particular physical
entity."
INDEX {
entPhysicalIndex,
ceDiagTestId
}
::= { ceDiagEntityCurrentTestTable 1 }
CeDiagEntityCurrentTestEntry ::= SEQUENCE {
ceDiagEntityCurrentTestMethod CeDiagDiagnosticMethod
}
ceDiagEntityCurrentTestMethod OBJECT-TYPE
SYNTAX CeDiagDiagnosticMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the method used to invoke the diagnostic
that is executing this test."
::= { ceDiagEntityCurrentTestEntry 1 }
-- DiagOnDemand
ceDiagOnDemandErrorAllowed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of errors the physical
entities will allow before aborting an on demand diagnostic job.
A value of '0' indicates that the an unlimited number of
errors are allowed for the on demand diagnostic job."
::= { ceDiagOnDemand 1 }
ceDiagOnDemandErrorAction OBJECT-TYPE
SYNTAX INTEGER {
continue(1),
stop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies how the physical entities in the
system are to proceed when they encounter an error during
an on demand diagnostic job.
'continue' - indicates that the physical entities will continue
executing the on demand job.
'stop' - indicates that the physical entities will abort
the on demand job."
::= { ceDiagOnDemand 2 }
ceDiagOnDemandIterations OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of iterations of an
on demand job."
::= { ceDiagOnDemand 3 }
ceDiagOnDemandJobTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagOnDemandJobEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of on demand jobs currently in the
system.
A row in this table can be created by setting the corresponding
instance of ceDiagOnDemandJobRowStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagOnDemandJobRowStatus to 'destroy'. Once the job is
completed the corresponding row is deleted from the table.
The individual results of the tests executed by this job are
updated in ceDiagTestPerfTable."
::= { ceDiagOnDemand 4 }
ceDiagOnDemandJobEntry OBJECT-TYPE
SYNTAX CeDiagOnDemandJobEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A on demand job currently executing on a particular physical
entity which supports on demand diagnostics."
INDEX { entPhysicalIndex }
::= { ceDiagOnDemandJobTable 1 }
CeDiagOnDemandJobEntry ::= SEQUENCE {
ceDiagOnDemandJobSuite CeDiagJobSuite,
ceDiagOnDemandJobTestList CeDiagTestList,
ceDiagOnDemandJobPortList CeDiagPortList,
ceDiagOnDemandJobRowStatus RowStatus
}
ceDiagOnDemandJobSuite OBJECT-TYPE
SYNTAX CeDiagJobSuite
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the various system predefined test
suites the on demand job can choose from.
If the value of this object is 'none', this job will run
the tests specified by ceDiagOnDemandJobTestList.
If the value of this object is 'complete', 'minimal',
'nonDisruptive' or 'perPort' the value of
ceDiagOnDemandJobTestList is ignored."
::= { ceDiagOnDemandJobEntry 1 }
ceDiagOnDemandJobTestList OBJECT-TYPE
SYNTAX CeDiagTestList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the user specified diagnostic suite
(i.e., a set of tests) to be executed by the corresponding
physical entity.
The set of tests supported by this physical entity are
specified in ceDiagTestInfoTable."
::= { ceDiagOnDemandJobEntry 2 }
ceDiagOnDemandJobPortList OBJECT-TYPE
SYNTAX CeDiagPortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the list of ports to be exercised by the
corresponding physical entity when executing the diagnostic
suite specified for the job."
::= { ceDiagOnDemandJobEntry 3 }
ceDiagOnDemandJobRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage the rows in this table.
When set to active(1) the on demand job is submitted.
When set to destroy(6) the on demand job is stopped.
When the value of this object is 'active', values within
this row cannot be modified, except by deleting and
re-creating the row."
::= { ceDiagOnDemandJobEntry 4 }
-- DiagScheduled
ceDiagScheduledJobTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagScheduledJobEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of scheduled jobs on the system.
A row in this table can be created by setting the corresponding
instance of ceDiagScheduledJobRowStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagScheduledJobRowStatus to 'destroy'. Once the job is
completed the corresponding row is deleted from the table.
The individual results of the tests executed by this job are
updated in ceDiagTestPerfTable."
::= { ceDiagScheduled 1 }
ceDiagScheduledJobEntry OBJECT-TYPE
SYNTAX CeDiagScheduledJobEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A job currently scheduled on a particular physical
entity."
INDEX {
entPhysicalIndex,
ceDiagScheduledJobIndex
}
::= { ceDiagScheduledJobTable 1 }
CeDiagScheduledJobEntry ::= SEQUENCE {
ceDiagScheduledJobIndex CeDiagJobIdentifier,
ceDiagScheduledJobType INTEGER,
ceDiagScheduledJobStart DateAndTime,
ceDiagScheduledJobDayOfWeek INTEGER,
ceDiagScheduledJobTestList CeDiagTestList,
ceDiagScheduledJobPortList CeDiagPortList,
ceDiagScheduledJobRowStatus RowStatus,
ceDiagScheduledJobSuite CeDiagJobSuite
}
ceDiagScheduledJobIndex OBJECT-TYPE
SYNTAX CeDiagJobIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary non-zero integer value that uniquely identifies a
single scheduled job with respect to a physical entity."
::= { ceDiagScheduledJobEntry 1 }
ceDiagScheduledJobType OBJECT-TYPE
SYNTAX INTEGER {
scheduledOneShot(1),
scheduledPeriodicDaily(2),
scheduledPeriodicWeekly(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of the scheduled job.
'scheduledOneShot' - the physical entity will invoke
this job at the time specified
by ceDiagScheduledJobStart.
'scheduledPeriodicDaily' - the physical entity will
first invoke this job at the time
specified by
ceDiagScheduledJobStart and
continue invoking it daily at the
same time.
'scheduledPeriodicWeekly' - the corresponding physical entity
will first invoke this job at the
time and day of the week specified
by ceDiagScheduledJobStart and
ceDiagScheduledJobDayOfWeek, and
continue to invoke it weekly at
the same time and day."
::= { ceDiagScheduledJobEntry 2 }
ceDiagScheduledJobStart OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies when a scheduled job will be executed.
If the value of ceDiagScheduledJobType is 'scheduledOneShot',
then this object only applies to the first execution of the job.
If the value of ceDiagScheduledJobType is
'scheduledPeriodicDaily' or 'scheduledPeriodicWeekly', then the
first four octets of this objects should be zero.
If the physical entity's job queue already contains a job
scheduled for execution at this time, then the process of
submitting the job will fail."
::= { ceDiagScheduledJobEntry 3 }
ceDiagScheduledJobDayOfWeek OBJECT-TYPE
SYNTAX INTEGER {
sunday(1),
monday(2),
tuesday(3),
wednesday(4),
thursday(5),
friday(6),
saturday(7),
notApplicable(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the day of the week for a
weekly periodic scheduled job. The value of
of this object must be specified if the value of
ceDiagScheduledJobType is 'scheduledPeriodicWeekly'.
This value of this object is set to 'notApplicable'
if the value of ceDiagScheduledJobType is 'scheduledOneShot'
or 'scheduledPeriodicDaily'."
::= { ceDiagScheduledJobEntry 4 }
ceDiagScheduledJobTestList OBJECT-TYPE
SYNTAX CeDiagTestList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the diagnostic suite (i.e., a set of
tests) to be executed by the corresponding physical entity.
The set of tests supported by this physical entity are
specified in ceDiagTestInfoTable."
::= { ceDiagScheduledJobEntry 5 }
ceDiagScheduledJobPortList OBJECT-TYPE
SYNTAX CeDiagPortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the list of ports to be tested by the
corresponding physical entity when executing the diagnostic
suite specified for the job."
::= { ceDiagScheduledJobEntry 6 }
ceDiagScheduledJobRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage the rows in this table.
When set to 'active' the scheduled job is submitted.
When set to destroy(6) the scheduled job is cleared.
When the value of this object is 'active', values within
this row cannot be modified, except by deleting and
re-creating the row."
::= { ceDiagScheduledJobEntry 7 }
ceDiagScheduledJobSuite OBJECT-TYPE
SYNTAX CeDiagJobSuite
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the various system predefined test
suites the on scheduled job can choose from.
If the value of this object is 'none', this job will run
the tests specified by ceDiagScheduledJobTestList.
If the value of this object is 'complete', 'minimal',
'nonDisruptive' or 'perPort' the value of
ceDiagScheduledJobTestList is ignored."
::= { ceDiagScheduledJobEntry 8 }
-- DiagTest
ceDiagTestPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagTestPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains data concerning the performance of tests
executed by each physical entity supporting the online
diagnostic feature. The table organizes tests into sets
associated with the physical entity supporting those tests.
The SNMP entity adds a set of tests corresponding to a physical
entity upon detection of a physical entity supporting
online diagnostics.
The SNMP entity deletes a set of tests corresponding to a
physical entity upon removal of the physical entity.
The SNMP entity replaces a set of tests corresponding to a
physical entity when the physical entity has been successfully
loaded with a different image (e.g., the field diagnostic
image)."
::= { ceDiagTest 1 }
ceDiagTestPerfEntry OBJECT-TYPE
SYNTAX CeDiagTestPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Data concerning the performance of a single test."
INDEX {
entPhysicalIndex,
ceDiagTestId
}
::= { ceDiagTestPerfTable 1 }
CeDiagTestPerfEntry ::= SEQUENCE {
ceDiagTestPerfLastResult INTEGER,
ceDiagTestPerfLastErrorID CeDiagErrorIdentifierOrZero,
ceDiagTestPerfLastRun DateAndTime,
ceDiagTestPerfFirstFail DateAndTime,
ceDiagTestPerfLastSuccess DateAndTime,
ceDiagTestPeffLastFail DateAndTime,
ceDiagTestPerfTotalRuns Counter32,
ceDiagTestPerfTotalFails Counter32,
ceDiagTestPerfConsecutiveFails Gauge32,
ceDiagTestPerfLastTestMethod CeDiagDiagnosticMethod
}
ceDiagTestPerfLastResult OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
fail(2),
pass(3),
skipped(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the result the last time this test was
executed by the corresponding physical entity:
'unknown' - the corresponding physical entity has not executed
the test.
'fail' - the test executed and detected at least one
failure.
'pass' - the test executed without detecting a failure.
'skipped' - the test was skipped due to insufficient resources."
::= { ceDiagTestPerfEntry 1 }
ceDiagTestPerfLastErrorID OBJECT-TYPE
SYNTAX CeDiagErrorIdentifierOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last error code of this test.
Details of the non-zero error code can be found in the
corresponding entry in ceDiagErrorInfoTable."
::= { ceDiagTestPerfEntry 2 }
ceDiagTestPerfLastRun OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last time the
corresponding physical entity executed this test. If the value
of ceDiagTestPerfLastResult is 'unknown', then the value of
this object is irrelevant."
::= { ceDiagTestPerfEntry 3 }
ceDiagTestPerfFirstFail OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the first time
the corresponding physical entity executed this test and it
failed. The value of this object is irrelevant if the value of
ceDiagTestPerfTotalFails is 0."
::= { ceDiagTestPerfEntry 4 }
ceDiagTestPerfLastSuccess OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last time the
corresponding physical entity executed this test and
it passed. The value 0x0000010100000000 indicates
that the corresponding physical entity has not
passed this test yet."
::= { ceDiagTestPerfEntry 5 }
ceDiagTestPeffLastFail OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last time the
corresponding physical entity executed this test and it failed.
If the value of ceDiagTestPerfTotalFails is 0, then the value
of this object is irrelevant."
::= { ceDiagTestPerfEntry 6 }
ceDiagTestPerfTotalRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of times the
corresponding physical entity has executed the test."
::= { ceDiagTestPerfEntry 7 }
ceDiagTestPerfTotalFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total number of times the
corresponding physical entity has executed the test and the
test resulted with a failure."
::= { ceDiagTestPerfEntry 8 }
ceDiagTestPerfConsecutiveFails OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the consecutive number of times the
corresponding physical entity has executed the test and it has
failed. The value of this object will be reset to '0' when the
physical entity executes the test and it succeeds."
::= { ceDiagTestPerfEntry 9 }
ceDiagTestPerfLastTestMethod OBJECT-TYPE
SYNTAX CeDiagDiagnosticMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the testing method used for the
last time this test was executed by the corresponding
physical entity."
::= { ceDiagTestPerfEntry 10 }
-- DiagHealthMonitor
ceDiagHMSyslogEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system will generate
syslog messages due to the tests run by health
monitor."
::= { ceDiagHealthMonitor 1 }
ceDiagHMTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagHMTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes attributes specific to the health monitor
for tests supported by a physical entity."
::= { ceDiagHealthMonitor 2 }
ceDiagHMTestEntry OBJECT-TYPE
SYNTAX CeDiagHMTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The attributes of a single test specific to the health
monitor."
INDEX {
entPhysicalIndex,
ceDiagTestId
}
::= { ceDiagHMTestTable 1 }
CeDiagHMTestEntry ::= SEQUENCE {
ceDiagHMTestEnabled TruthValue,
ceDiagHMTestIntervalMin Unsigned32,
ceDiagHMTestIntervalDefault Unsigned32,
ceDiagHMTestInterval Unsigned32,
ceDiagHMTestThresholdDefault Unsigned32,
ceDiagHMTestThreshold Unsigned32,
ceDiagHMTestThreshWindowSuite INTEGER,
ceDiagHMTestThreshWindowSize Unsigned32
}
ceDiagHMTestEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this test is enabled for
health monitor."
::= { ceDiagHMTestEntry 1 }
ceDiagHMTestIntervalMin OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the minimum interval which the health
monitor can periodically invoke this test."
::= { ceDiagHMTestEntry 2 }
ceDiagHMTestIntervalDefault OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the default interval which the health
monitor will periodically invoke this test. A value of '0'
indicates that the health monitor will not invoke the test."
::= { ceDiagHMTestEntry 3 }
ceDiagHMTestInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interval at which the health monitor
periodically invokes this test. A value of '0' indicates that
the health monitor will not invoke the test. A value of '0'
cannot be set."
::= { ceDiagHMTestEntry 4 }
ceDiagHMTestThresholdDefault OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the default consecutive failure
count threshold. When the specified failure count threshold
is reached, the diagnostic test result is set to failure.
A value of '0' indicates that the health monitor will not
invoke this test."
::= { ceDiagHMTestEntry 5 }
ceDiagHMTestThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the consecutive failure count threshold
for this test. When the specified failure count threshold is
reached, the diagnostic test result is set to failure.
A value of '0' indicates that there is no failure count
threshold for this test.
This object is used in combination with
ceDiagHMTestThreshWindowSuite and ceDiagHMTestThreshWindowSize
to specify a sliding history window for which the threshold
is monitored.
When the value of ceDiagHMTestThreshWindowSuite is
'default', the sliding history window is in number of test
runs, with a window size the same as the value of this
object.
If ceDiagHMTestThreshWindowSuite and
ceDiagHMTestThreshWindowSize are not supported, the failure
count threshold will be the consecutive failure count threshold."
::= { ceDiagHMTestEntry 6 }
ceDiagHMTestThreshWindowSuite OBJECT-TYPE
SYNTAX INTEGER {
default(1),
milliseconds(2),
seconds(3),
minutes(4),
hours(5),
days(6),
runs(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies a sliding history window
parameter which is used in combination with
ceDiagHMTestThreshold. When the specified failure count
threshold is reached in this sliding history window,
the diagnostic test result is set to failure.
'default' - The sliding history window is in number
of test runs or executions, with a window
size the same as ceDiagHMTestThreshold.
'milliseconds' - The sliding history window is in milli-seconds
specified by ceDiagHMTestThreshWindowSize.
'seconds' - The sliding history window is in seconds
specified by ceDiagHMTestThreshWindowSize.
'minutes' - The sliding history window is in minutes
specified by ceDiagHMTestThreshWindowSize.
'hours' - The sliding history window is in hours
specified by ceDiagHMTestThreshWindowSize.
'days' - The sliding history window is in days
specified by ceDiagHMTestThreshWindowSize.
'runs' - The sliding history window is in number
of test runs or executions specified by
ceDiagHMTestThreshWindowSize.
When the value of this object is 'default' the user cannot set
any value for ceDiagHMTestThreshWindowSize.
When the value of this object is not 'default',
then the value of ceDiagHMTestThreshWindowSize cannot be zero (0)."
::= { ceDiagHMTestEntry 7 }
ceDiagHMTestThreshWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the sliding history window size.
When the value of ceDiagHMTestThreshWindowSuite is 'default', the
user cannot set any value for this object.
The value of zero (0) cannot be set."
::= { ceDiagHMTestEntry 8 }
-- DiagEvents
ceDiagEventLogSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of entries which the
event log buffer can contain."
::= { ceDiagEvents 1 }
ceDiagEventCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of entries currently stored
in the event log buffer."
::= { ceDiagEvents 2 }
ceDiagEventMaxQueries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of query entries allowed in the
ceDiagEventQueryTable."
::= { ceDiagEvents 3 }
ceDiagEventQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagEventQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A control table used to query the event log buffer. Each row
instance in the table represents a query with its parameters.
The resulting data for each instance of a query in this table
is stored in the ceDiagEventResultTable.
A row in this table can be created by setting the corresponding
instance of ceDiagEventQueryStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagEventQueryStatus to 'destroy'."
::= { ceDiagEvents 4 }
ceDiagEventQueryEntry OBJECT-TYPE
SYNTAX CeDiagEventQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the ceDiagEventQueryTable used to setup
a event log buffer query to search for diagnostic events.
The actual search is started by when the value of
ceDiagEventQueryStatus is set to 'active'."
INDEX { ceDiagEventQueryIndex }
::= { ceDiagEventQueryTable 1 }
CeDiagEventQueryEntry ::= SEQUENCE {
ceDiagEventQueryIndex Unsigned32,
ceDiagEventQueryPhysicalIndex EntPhysicalIndexOrZero,
ceDiagEventQuerySeverity INTEGER,
ceDiagEventQueryOwner SnmpAdminString,
ceDiagEventQueryResultingRows Integer32,
ceDiagEventQueryStatus RowStatus
}
ceDiagEventQueryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer in the range of 1 to
ceDiagEventMaxQueries to identify this control query."
::= { ceDiagEventQueryEntry 1 }
ceDiagEventQueryPhysicalIndex OBJECT-TYPE
SYNTAX EntPhysicalIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the physical entity for the event
log buffer query. A value of zero indicates that the
query will return events of all physical entities."
::= { ceDiagEventQueryEntry 2 }
ceDiagEventQuerySeverity OBJECT-TYPE
SYNTAX INTEGER {
all(0),
info(1),
warning(2),
error(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the severity of the event log buffer
query. A value of 'all' indicates that the search will return
events of all severities."
::= { ceDiagEventQueryEntry 3 }
ceDiagEventQueryOwner OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The manager entity that configured this entry and is therefore
using the resources assigned to it. It is used to model an
administratively assigned name of the owner of a resource.
It is recommended that this object have one or more the following
information: IP address, management station name, network
manager's name, location, or phone number."
::= { ceDiagEventQueryEntry 4 }
ceDiagEventQueryResultingRows OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result status of the query. Possible values are:
-1 - Either the query has not been initiated or
the agent is busy processing this query instance.
Time to completion of the query processing
depends on the complexity of the query and
the number of matches that satisfy this query.
0..2147483647 - The search has ended and this is the number of
rows in the ceDiagEventResultTable, resulting
from this query."
::= { ceDiagEventQueryEntry 5 }
ceDiagEventQueryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage rows in this table.
When set to 'active', the query to search for diagnostic
events is initiated. Once a row becomes active, values
within the row cannot be modified, except by deleting
and re-creating the row."
::= { ceDiagEventQueryEntry 6 }
ceDiagEventResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeDiagEventResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing event log information corresponding
to all the completed queries set up in ceDiagEventQueryTable.
The query result will not become available until the current
search is completed."
::= { ceDiagEvents 5 }
ceDiagEventResultEntry OBJECT-TYPE
SYNTAX CeDiagEventResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in ceDiagEventResultTable, containing
information about an event that matches the search criteria
set in the corresponding row of ceDiagEventQueryTable."
INDEX {
ceDiagEventQueryIndex,
ceDiagEventResultIndex
}
::= { ceDiagEventResultTable 1 }
CeDiagEventResultEntry ::= SEQUENCE {
ceDiagEventResultIndex Unsigned32,
ceDiagEventResultPhysicalIndex PhysicalIndex,
ceDiagEventResultPhysicalDescr SnmpAdminString,
ceDiagEventResultTime DateAndTime,
ceDiagEventResultSeverity INTEGER,
ceDiagEventResultLogText SnmpAdminString
}
ceDiagEventResultIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A positive integer which uniquely identifies a result
entry matching a particular query."
::= { ceDiagEventResultEntry 1 }
ceDiagEventResultPhysicalIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the physical entity corresponding
to this event."
::= { ceDiagEventResultEntry 2 }
ceDiagEventResultPhysicalDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies a textual description of physical
entity corresponding to this event."
::= { ceDiagEventResultEntry 3 }
ceDiagEventResultTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the time at which this event occurred."
::= { ceDiagEventResultEntry 4 }
ceDiagEventResultSeverity OBJECT-TYPE
SYNTAX INTEGER {
info(1),
warning(2),
error(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the severity of this event."
::= { ceDiagEventResultEntry 5 }
ceDiagEventResultLogText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text message of this event."
::= { ceDiagEventResultEntry 6 }
ceDiagEventErrorMsg OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The error message related to the notification."
::= { ceDiagEvents 6 }
-- Notification Control
ceDiagEnableBootUpFailedNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies whether the system produces the
ceDiagBootUpFailedNotif. A 'false' value will prevent
ceDiagBootUpFailedNotif notifications from being
generated by this system."
::= { ceDiagNotificationControl 1 }
ceDiagEnableHMThreshReachedNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies whether the system produces the
ceDiagHMThresholdReachedNotif. A 'false' value will prevent
ceDiagHMThresholdReachedNotif notifications from being
generated by this system."
::= { ceDiagNotificationControl 2 }
ceDiagEnableHMTestRecoverNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies whether the system produces the
ceDiagHMTestRecoverNotif. A 'false' value will prevent
ceDiagHMTestRecoverNotif notifications from being
generated by this system."
::= { ceDiagNotificationControl 3 }
ceDiagEnableSchedTestFailedNotif OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies whether the system produces the
ceDiagScheduledTestFailedNotif. A 'false' value will prevent
ceDiagScheduledTestFailedNotif notifications from being
generated by this system."
::= { ceDiagNotificationControl 4 }
-- Notifications
ceDiagBootUpFailedNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalDescr,
ceDiagEntityBootLevel,
ceDiagEventErrorMsg
}
STATUS current
DESCRIPTION
"A ceDiagBootUpFailedNotif is sent if the online diagnostic
discovers a boot up failure for a physical entity."
::= { ciscoEntityDiagMIBNotifs 1 }
ceDiagHMThresholdReachedNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalDescr,
ceDiagHMTestThreshold,
ceDiagTestText,
ceDiagTestAttributes
}
STATUS current
DESCRIPTION
"A ceDiagHMThresholdReachedNotif is sent if the number of
consecutive failure of a Health Monitoring test reaches
the configured threshold."
::= { ciscoEntityDiagMIBNotifs 2 }
ceDiagHMTestRecoverNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalDescr,
ceDiagTestText,
ceDiagTestAttributes
}
STATUS current
DESCRIPTION
"A ceDiagHMTestRecoverNotif is sent when no error is
detected for the first time on the same Health Monitoring test
which previously triggered ceDiagHMThresholdReachedNotif."
::= { ciscoEntityDiagMIBNotifs 3 }
ceDiagScheduledTestFailedNotif NOTIFICATION-TYPE
OBJECTS {
entPhysicalDescr,
ceDiagTestText,
ceDiagEventErrorMsg
}
STATUS current
DESCRIPTION
"A ceDiagScheduledTestFailedNotif is sent if a scheduled
test failed."
::= { ciscoEntityDiagMIBNotifs 4 }
-- Conformance
ciscoEntityDiagMIBCompliances OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBConform 1 }
ciscoEntityDiagMIBGroups OBJECT IDENTIFIER
::= { ciscoEntityDiagMIBConform 2 }
ciscoEntityDiagMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for SNMP entities that implement the
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
strongly recommended for any platform implementing the
online diagnostic feature."
MODULE -- this module
MANDATORY-GROUPS {
ceDiagDescrGroup,
ceDiagGlobalConfigGroup,
ceDiagEntityGroup,
ceDiagOnDemandGroup,
ceDiagScheduledGroup,
ceDiagTestPerfGroup,
ceDiagEventGroup
}
GROUP ceDiagEntityImageGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the physical entities in the system
are capable of running their own diagnostic image."
GROUP ceDiagHealthMonitorGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports a health monitor."
GROUP ceDiagScheduledJobSuiteGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports scheduled job test suites."
::= { ciscoEntityDiagMIBCompliances 1 }
ciscoEntityDiagMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for SNMP entities that implement the
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
strongly recommended for any platform implementing the
online diagnostic feature.
This statement is deprecated and superceded by
ciscoEntityDiagMIBComplianceRev3."
MODULE -- this module
MANDATORY-GROUPS {
ceDiagDescrGroup,
ceDiagGlobalConfigGroup,
ceDiagEntityGroup,
ceDiagOnDemandGroup,
ceDiagScheduledGroup,
ceDiagTestPerfGroup,
ceDiagEventGroup
}
GROUP ceDiagEntityImageGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the physical entities in the system
are capable of running their own diagnostic image."
GROUP ceDiagHealthMonitorGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports a health monitor."
GROUP ceDiagScheduledJobSuiteGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports scheduled job test suites."
GROUP ceDiagNotifControlGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagNotifErrorMsgGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagNotificationGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
::= { ciscoEntityDiagMIBCompliances 2 }
ciscoEntityDiagMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for SNMP entities that implement the
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
strongly recommended for any platform implementing the
online diagnostic feature.
This statement is deprecated and superceded by
ciscoEntityDiagMIBComplianceRev4."
MODULE -- this module
MANDATORY-GROUPS {
ceDiagDescrGroup,
ceDiagGlobalConfigGroup,
ceDiagEntityGroup,
ceDiagOnDemandGroup,
ceDiagScheduledGroup,
ceDiagTestPerfGroup,
ceDiagEventGroup
}
GROUP ceDiagEntityImageGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the physical entities in the system
are capable of running their own diagnostic image."
GROUP ceDiagHealthMonitorGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports a health monitor."
GROUP ceDiagScheduledJobSuiteGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports scheduled job test suites."
GROUP ceDiagNotifControlGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagNotifErrorMsgGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagNotificationGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagTestPerfLastTestMethodGroup
DESCRIPTION
"This group is mandatory for devices which can provide
the last testing method for a diagnostic test."
::= { ciscoEntityDiagMIBCompliances 3 }
ciscoEntityDiagMIBComplianceRev4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities that implement the
CISCO-ENTITY-DIAG-MIB. Implementation of this MIB module is
strongly recommended for any platform implementing the
online diagnostic feature."
MODULE -- this module
MANDATORY-GROUPS {
ceDiagDescrGroup,
ceDiagGlobalConfigGroup,
ceDiagEntityGroup,
ceDiagOnDemandGroup,
ceDiagScheduledGroup,
ceDiagTestPerfGroup,
ceDiagEventGroup
}
GROUP ceDiagEntityImageGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the physical entities in the system
are capable of running their own diagnostic image."
GROUP ceDiagHealthMonitorGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports a health monitor."
GROUP ceDiagScheduledJobSuiteGroup
DESCRIPTION
"The objects defined by this group only need to be
implemented if the online diagnostic feature
supports scheduled job test suites."
GROUP ceDiagNotifControlGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagNotifErrorMsgGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagNotificationGroup
DESCRIPTION
"This group is mandatory for devices which can provide
online diagnostic notifications."
GROUP ceDiagTestPerfLastTestMethodGroup
DESCRIPTION
"This group is mandatory for devices which support sliding
history window parameters for Health Monitor diagnostic test."
GROUP ceDiagHMTestThreshWindowGroup
DESCRIPTION
"This group is mandatory for devices which support
sliding window parameters for health monitor tests."
OBJECT ceDiagBootupLevel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEntityImageAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEntityFieldDiagnosticUrl
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandErrorAllowed
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandErrorAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandIterations
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandJobSuite
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandJobTestList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandJobPortList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagOnDemandJobRowStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobStart
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobDayOfWeek
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobTestList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobPortList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobRowStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagScheduledJobSuite
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagHMSyslogEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagHMTestEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagHMTestInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagHMTestThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagHMTestThreshWindowSuite
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagHMTestThreshWindowSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEventLogSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEventQueryPhysicalIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEventQuerySeverity
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEventQueryOwner
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEventQueryStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEnableBootUpFailedNotif
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEnableHMThreshReachedNotif
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEnableHMTestRecoverNotif
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ceDiagEnableSchedTestFailedNotif
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoEntityDiagMIBCompliances 4 }
-- Units of Conformance
ceDiagDescrGroup OBJECT-GROUP
OBJECTS {
ceDiagTestText,
ceDiagTestAttributes,
ceDiagTestCustomAttributeDesc,
ceDiagErrorText
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe tests and errors
supported by each physical entity."
::= { ciscoEntityDiagMIBGroups 1 }
ceDiagGlobalConfigGroup OBJECT-GROUP
OBJECTS { ceDiagBootupLevel }
STATUS current
DESCRIPTION
"A collection of managed objects that describe global
configuration of the online diagnostic feature."
::= { ciscoEntityDiagMIBGroups 2 }
ceDiagEntityGroup OBJECT-GROUP
OBJECTS {
ceDiagEntityBootLevel,
ceDiagEntityCurrentTestMethod
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe the state of a
physical entity with respect ot the online diagnostic
feature."
::= { ciscoEntityDiagMIBGroups 3 }
ceDiagEntityImageGroup OBJECT-GROUP
OBJECTS {
ceDiagEntityImageAdminStatus,
ceDiagEntityImageOperStatus,
ceDiagEntityFieldDiagnosticUrl
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe the diagnostic
image which the physical entity is running."
::= { ciscoEntityDiagMIBGroups 4 }
ceDiagOnDemandGroup OBJECT-GROUP
OBJECTS {
ceDiagOnDemandErrorAllowed,
ceDiagOnDemandErrorAction,
ceDiagOnDemandIterations,
ceDiagOnDemandJobSuite,
ceDiagOnDemandJobTestList,
ceDiagOnDemandJobPortList,
ceDiagOnDemandJobRowStatus
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe the diagnostic
on demand diagnostic jobs on the system."
::= { ciscoEntityDiagMIBGroups 5 }
ceDiagScheduledGroup OBJECT-GROUP
OBJECTS {
ceDiagScheduledJobType,
ceDiagScheduledJobStart,
ceDiagScheduledJobDayOfWeek,
ceDiagScheduledJobTestList,
ceDiagScheduledJobPortList,
ceDiagScheduledJobRowStatus
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe the diagnostic
on demand diagnostic jobs on the system."
::= { ciscoEntityDiagMIBGroups 6 }
ceDiagTestPerfGroup OBJECT-GROUP
OBJECTS {
ceDiagTestPerfLastResult,
ceDiagTestPerfLastErrorID,
ceDiagTestPerfLastRun,
ceDiagTestPerfFirstFail,
ceDiagTestPerfLastSuccess,
ceDiagTestPeffLastFail,
ceDiagTestPerfTotalRuns,
ceDiagTestPerfTotalFails,
ceDiagTestPerfConsecutiveFails
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe the performance
of tests supported by each physical entity."
::= { ciscoEntityDiagMIBGroups 7 }
ceDiagHealthMonitorGroup OBJECT-GROUP
OBJECTS {
ceDiagHMSyslogEnabled,
ceDiagHMTestEnabled,
ceDiagHMTestIntervalMin,
ceDiagHMTestInterval,
ceDiagHMTestIntervalDefault,
ceDiagHMTestThresholdDefault,
ceDiagHMTestThreshold
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe tests and test
configuration with relating to the health monitor."
::= { ciscoEntityDiagMIBGroups 8 }
ceDiagEventGroup OBJECT-GROUP
OBJECTS {
ceDiagEventLogSize,
ceDiagEventCount,
ceDiagEventMaxQueries,
ceDiagEventQueryPhysicalIndex,
ceDiagEventQuerySeverity,
ceDiagEventQueryOwner,
ceDiagEventQueryResultingRows,
ceDiagEventQueryStatus,
ceDiagEventResultPhysicalIndex,
ceDiagEventResultPhysicalDescr,
ceDiagEventResultTime,
ceDiagEventResultSeverity,
ceDiagEventResultLogText
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe online
diagnostic event history."
::= { ciscoEntityDiagMIBGroups 9 }
ceDiagScheduledJobSuiteGroup OBJECT-GROUP
OBJECTS { ceDiagScheduledJobSuite }
STATUS current
DESCRIPTION
"A collection of managed objects that describe the test suite information
for a diagnostic scheduled job."
::= { ciscoEntityDiagMIBGroups 10 }
ceDiagNotifControlGroup OBJECT-GROUP
OBJECTS {
ceDiagEnableBootUpFailedNotif,
ceDiagEnableHMThreshReachedNotif,
ceDiagEnableHMTestRecoverNotif,
ceDiagEnableSchedTestFailedNotif
}
STATUS current
DESCRIPTION
"A collection of objects providing enabling/disabling
of the boot up failed, health monitoring, and
scheduled job notifications for online diagnostics."
::= { ciscoEntityDiagMIBGroups 11 }
ceDiagNotifErrorMsgGroup OBJECT-GROUP
OBJECTS { ceDiagEventErrorMsg }
STATUS current
DESCRIPTION
"A collection of objects providing error message used by
various notifications."
::= { ciscoEntityDiagMIBGroups 12 }
ceDiagNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ceDiagBootUpFailedNotif,
ceDiagHMThresholdReachedNotif,
ceDiagHMTestRecoverNotif,
ceDiagScheduledTestFailedNotif
}
STATUS current
DESCRIPTION
"A collection of notifications providing for boot up failed, health
monitoring, and scheduled job within online diagnostics."
::= { ciscoEntityDiagMIBGroups 13 }
ceDiagTestPerfLastTestMethodGroup OBJECT-GROUP
OBJECTS { ceDiagTestPerfLastTestMethod }
STATUS current
DESCRIPTION
"A collection of managed objects that describe the last testing method
for a diagnostic test."
::= { ciscoEntityDiagMIBGroups 14 }
ceDiagHMTestThreshWindowGroup OBJECT-GROUP
OBJECTS {
ceDiagHMTestThreshWindowSuite,
ceDiagHMTestThreshWindowSize
}
STATUS current
DESCRIPTION
"A collection of managed objects that describe the sliding
history window parameters for a Health Monitor diagnostic test."
::= { ciscoEntityDiagMIBGroups 15 }
END
Reference in New Issue Copy Permalink