david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-ENTITY-QFP-MIB

1295 lines
45 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-ENTITY-QFP-MIB.my
--
-- This MIB module is used to monitor Quantum Flow Processors (QFP).
--
-- November 2009, Muthukrishnan Venkatraman
--
-- Copyright (c) 2009, 2012, 2014 by cisco Systems Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ENTITY-QFP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Gauge32,
NOTIFICATION-TYPE,
Counter32,
Counter64,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DateAndTime,
TruthValue
FROM SNMPv2-TC
entPhysicalIndex
FROM ENTITY-MIB
CounterBasedGauge64
FROM HCNUM-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoEntityQfpMIB MODULE-IDENTITY
LAST-UPDATED "201406180000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"This MIB module defines managed objects that facilitate the
management of Quantum Flow Processors (QFP), which are listed
in the ENTITY-MIB (RFC 4133) entPhysicalTable as an
entPhysicalClass of 'cpu'.
The Quantum Flow Processors (QFP) technology is an architecture
family developed by Cisco, which has fully integrated and
programmable networking chip set that controls different
functions of a system such as packet forwarding.
This module contains objects to monitor various QFP
statistics such as system, utilization, memory, etc.
The utilization statistics can be used for future capacity
planning. The calculation of this statistics may vary by
devices which host QFPs, hence the user must refer to the
specific device document of interest for the exact method
of calculation. The utilization statistics have the following
terminology.
o Input - Communication channel where packets arrive on the
QFP.
o Output - Communication channel where packets leave the QFP.
o Priority - A classification applied to packets indicating
they should be treated with greater urgency.
o Non-Priority - A classification applied to packets indicating
they should be treated with lesser urgency.
o Processing Load - The percentage of time over some interval
that the QFP has spent forwarding packets,
relative to the total time spent both
forwarding packets and being idle."
REVISION "201406180000Z"
DESCRIPTION
"Added the following objects to the MIB.
ceqfpThroughputLicensedBW, ceqfpThroughputLevel,
ceqfpThroughputInterval, ceqfpThroughputThreshold,
ceqfpThroughputAvgRate to ceqfpThroughputTable.
Added ceqfpThroughputNotifEnabled to ciscoEntityQfpNotif group.
Added ceqfpThroughputNotif as a new notification to the MIB.
Added a new MIB conform group, ceqfpThroughputGroup for the new
objects.
Also modified the ciscoEntityQfpMIBComplianceRev2 to add the new
group ceqfpThroughputGroup."
REVISION "201206060000Z"
DESCRIPTION
"Added the following new objects to the
ceqfpMemoryResourceTable.
ceqfpMemoryResTotalOvrflw, ceqfpMemoryHCResTotal,
ceqfpMemoryResInUseOvrflw, ceqfpMemoryHCResInUse,
ceqfpMemoryResFreeOvrflw,ceqfpMemoryHCResFree,
ceqfpMemoryResLowFreeWatermarkOvrflw,
ceqfpMemoryHCResLowFreeWatermark.
Added following new compliance groups.
ciscoEntityQfpMemoryResourceOvrflwGroup,
ciscoEntityQfpMemoryHCResourceGroup.
Added new compliance ciscoEntityQfpMIBComplianceRev2 which
deprecates ciscoEntityQfpMIBComplianceRev1."
REVISION "200912020000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 715 }
CiscoQfpPacketRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An estimate of throughput in units of packets per second.
The CiscoQfpPacketRate type represents a non-negative integer,
which may increase or decrease, but shall never exceed a
maximum value, nor fall below a minimum value of Counter64.
The Counter64 syntax is used for encoding rules."
SYNTAX Counter64
CiscoQfpBitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An estimate of throughput in units of bits per second.
The CiscoQfpBitRate type represents a non-negative integer,
which may increase or decrease, but shall never exceed a
maximum value, nor fall below a minimum value of Counter64.
The Counter64 syntax is used for encoding rules."
SYNTAX Counter64
CiscoQfpTimeInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated integer-value describing the available interval
values for which the periodic statistics are to be collected.
fiveSeconds (1) - Interval to collect last 5 seconds
statistics
oneMinute(2) - Interval to collect last 1 minute
statistics
fiveMinutes(3) - Interval to collect last 5 minutes
statistics
sixtyMinutes(4) - Interval to collect last 60 minutes
statistics"
SYNTAX INTEGER {
fiveSeconds(1),
oneMinute(2),
fiveMinutes(3),
sixtyMinutes(4)
}
CiscoQfpMemoryResource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated integer-value describing various memory resources
used by the QFP.
dram (1) - Dynamic Random Access Memory (DRAM) memory resource"
SYNTAX INTEGER {
dram(1)
}
ciscoEntityQfpMIBNotifs OBJECT IDENTIFIER
::= { ciscoEntityQfpMIB 0 }
ciscoEntityQfpMIBObjects OBJECT IDENTIFIER
::= { ciscoEntityQfpMIB 1 }
ciscoEntityQfpMIBConform OBJECT IDENTIFIER
::= { ciscoEntityQfpMIB 2 }
ciscoEntityQfp OBJECT IDENTIFIER
::= { ciscoEntityQfpMIBObjects 1 }
ciscoEntityQfpNotif OBJECT IDENTIFIER
::= { ciscoEntityQfpMIBObjects 2 }
ceqfpSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeqfpSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the QFP system information for each QFP
physical entity.
An agent creates a conceptual row to this table corresponding
to a QFP physical entity upon detection of a physical entity
supporting the QFP system information.
An agent destroys a conceptual row from this table
corresponding to a QFP physical entity upon removal
of the QFP host physical entity."
::= { ciscoEntityQfp 1 }
ceqfpSystemEntry OBJECT-TYPE
SYNTAX CeqfpSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ceqfpSystemTable. There is an entry
in this table for each QFP entity, as defined by a value of
entPhysicalIndex."
INDEX { entPhysicalIndex }
::= { ceqfpSystemTable 1 }
CeqfpSystemEntry ::= SEQUENCE {
ceqfpSystemTrafficDirection INTEGER,
ceqfpSystemState INTEGER,
ceqfpNumberSystemLoads Counter32,
ceqfpSystemLastLoadTime DateAndTime
}
ceqfpSystemTrafficDirection OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ingress(2),
egress(3),
both(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the traffic direction that this QFP is
assigned to process. The enumerated values are described below.
none (1) - The QFP is not assigned to processes any traffic
yet
ingress (2) - The QFP processes inbound traffic
egress (3) - The QFP processes outbound traffic
both (4) - The QFP processes both inbound and outbound
traffic"
::= { ceqfpSystemEntry 1 }
ceqfpSystemState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
reset(2),
init(3),
active(4),
activeSolo(5),
standby(6),
hotStandby(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current QFP state. The enumerated
values are described below.
unknown (1) - The state of the QFP is unknown
reset (2) - The QFP is reset
init (3) - The QFP is being initialized
active (4) - The QFP is active in a system with redundant
QFP
activeSolo (5) - The QFP is active and there is no redundant
QFP in the system
standby (6) - The QFP is standby in a redundant system.
hotStandby (7) - The QFP is standby and synchronized with
active, so that a switchover in this state
will preserve state of the active. Stateful
datapath features are synchronized between the
active QFP and standby QFP"
::= { ceqfpSystemEntry 2 }
ceqfpNumberSystemLoads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of times the QFP is loaded,
since the QFP host is up."
::= { ceqfpSystemEntry 3 }
ceqfpSystemLastLoadTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP last load time."
::= { ceqfpSystemEntry 4 }
ceqfpFiveSecondUtilAlgo OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
fiveSecSample(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents the method used to calculate 5 Second
interval utilization data. The enumerated values are described
below.
unknown (1) - The calculation method is unknown
fiveSecSample (2) - The value is calculated based on the last
5 second sampling period of utilization
data."
::= { ciscoEntityQfp 2 }
ceqfpOneMinuteUtilAlgo OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
fiveSecSMA(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents the method used to calculate 1 Minute
interval utilization data. The enumerated values are described
below.
unknown (1) - The calculation method is unknown
fiveSecSMA (2) - The value is calculated using Simple Moving
Average of last 12 five seconds utilization
data."
::= { ciscoEntityQfp 3 }
ceqfpFiveMinutesUtilAlgo OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
fiveSecSMA(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents the method used to calculate 5 Minutes
interval utilization data. The enumerated values are described
below.
unknown (1) - The calculation method is unknown
fiveSecSMA (2) - The value is calculated using Simple Moving
Average of last 60 five seconds utilization
data."
::= { ciscoEntityQfp 4 }
ceqfpSixtyMinutesUtilAlgo OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
fiveSecSMA(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents the method used to calculate 60 Minutes
interval utilization data. The enumerated values are described
below.
unknown (1) - The calculation method is unknown
fiveSecSMA (1) - The value is calculated using Simple Moving
Average of last 720 five seconds utilization
data."
::= { ciscoEntityQfp 5 }
ceqfpUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeqfpUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the utilization statistics collected
by each QFP physical entity at various time interval such as
last 5 seconds, 1 minute, etc.
An agent creates a conceptual row to this table corresponding
to a QFP physical entity for a time interval upon detection of
a physical entity supporting the utilization statistics for a
time interval.
The agent destroys a conceptual row from this table
corresponding to a QFP physical entity for a time interval
upon removal of the QFP host physical entity or it does not
receive the utilization statistics update for a certain time
period. The time period to wait before deleting an entry from
this table would be the discretion of the supporting device."
::= { ciscoEntityQfp 6 }
ceqfpUtilizationEntry OBJECT-TYPE
SYNTAX CeqfpUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ceqfpUtilizationTable. There is
an entry in this table for each QFP entity by a value of
entPhysicalIndex and the supported time interval by a value
of ceqfpUtilTimeInterval.
The method of utilization data calculation for each interval
period can be identified through the respective interval
scalar objects. For example the utilizaiton data calculation
method for 'fiveSecond' interval can be identified by
ceqfpFiveSecondUtilAlgo."
INDEX {
entPhysicalIndex,
ceqfpUtilTimeInterval
}
::= { ceqfpUtilizationTable 1 }
CeqfpUtilizationEntry ::= SEQUENCE {
ceqfpUtilTimeInterval CiscoQfpTimeInterval,
ceqfpUtilInputPriorityPktRate CiscoQfpPacketRate,
ceqfpUtilInputPriorityBitRate CiscoQfpBitRate,
ceqfpUtilInputNonPriorityPktRate CiscoQfpPacketRate,
ceqfpUtilInputNonPriorityBitRate CiscoQfpBitRate,
ceqfpUtilInputTotalPktRate CiscoQfpPacketRate,
ceqfpUtilInputTotalBitRate CiscoQfpBitRate,
ceqfpUtilOutputPriorityPktRate CiscoQfpPacketRate,
ceqfpUtilOutputPriorityBitRate CiscoQfpBitRate,
ceqfpUtilOutputNonPriorityPktRate CiscoQfpPacketRate,
ceqfpUtilOutputNonPriorityBitRate CiscoQfpBitRate,
ceqfpUtilOutputTotalPktRate CiscoQfpPacketRate,
ceqfpUtilOutputTotalBitRate CiscoQfpBitRate,
ceqfpUtilProcessingLoad Gauge32
}
ceqfpUtilTimeInterval OBJECT-TYPE
SYNTAX CiscoQfpTimeInterval
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the time interval for which the
utilization statistics being collected. The interval
values can be 5 second, 1 minute, etc. as specified in
the CiscoQfpTimeInterval."
::= { ceqfpUtilizationEntry 1 }
ceqfpUtilInputPriorityPktRate OBJECT-TYPE
SYNTAX CiscoQfpPacketRate
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP input channel priority packet
rate during this interval."
::= { ceqfpUtilizationEntry 2 }
ceqfpUtilInputPriorityBitRate OBJECT-TYPE
SYNTAX CiscoQfpBitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP input channel priority bit rate
during this interval."
::= { ceqfpUtilizationEntry 3 }
ceqfpUtilInputNonPriorityPktRate OBJECT-TYPE
SYNTAX CiscoQfpPacketRate
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP input channel non-priority
packet rate during this interval."
::= { ceqfpUtilizationEntry 4 }
ceqfpUtilInputNonPriorityBitRate OBJECT-TYPE
SYNTAX CiscoQfpBitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP input channel non-priority
bit rate during this interval."
::= { ceqfpUtilizationEntry 5 }
ceqfpUtilInputTotalPktRate OBJECT-TYPE
SYNTAX CiscoQfpPacketRate
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP input channel total packet rate
during this interval, which includes both priority and
non-priority input packet rate."
::= { ceqfpUtilizationEntry 6 }
ceqfpUtilInputTotalBitRate OBJECT-TYPE
SYNTAX CiscoQfpBitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP input channel total bit rate
during this interval, which includes both priority and
non-priority input bit rate."
::= { ceqfpUtilizationEntry 7 }
ceqfpUtilOutputPriorityPktRate OBJECT-TYPE
SYNTAX CiscoQfpPacketRate
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP output channel priority packet
rate during this interval."
::= { ceqfpUtilizationEntry 8 }
ceqfpUtilOutputPriorityBitRate OBJECT-TYPE
SYNTAX CiscoQfpBitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP output channel priority bit
rate during this interval."
::= { ceqfpUtilizationEntry 9 }
ceqfpUtilOutputNonPriorityPktRate OBJECT-TYPE
SYNTAX CiscoQfpPacketRate
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP output channel non-priority
packet rate during this interval."
::= { ceqfpUtilizationEntry 10 }
ceqfpUtilOutputNonPriorityBitRate OBJECT-TYPE
SYNTAX CiscoQfpBitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP output channel non-priority
bit rate during this interval."
::= { ceqfpUtilizationEntry 11 }
ceqfpUtilOutputTotalPktRate OBJECT-TYPE
SYNTAX CiscoQfpPacketRate
UNITS "packets per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP output channel total packet rate
during this interval, which includes both priority and
non-priority output packet rate."
::= { ceqfpUtilizationEntry 12 }
ceqfpUtilOutputTotalBitRate OBJECT-TYPE
SYNTAX CiscoQfpBitRate
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP output channel total bit rate
during this interval, which includes both priority and
non-priority bit rate."
::= { ceqfpUtilizationEntry 13 }
ceqfpUtilProcessingLoad OBJECT-TYPE
SYNTAX Gauge32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the QFP processing load during this
interval."
::= { ceqfpUtilizationEntry 14 }
ceqfpMemoryResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeqfpMemoryResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the memory resources statistics for
each QFP physical entity.
An agent creates a conceptual row to this table corresponding
to a QFP physical entity and its supported memory resource type
upon detection of a physical entity supporting the memory
resource statistics for a memory resource type.
An agent destroys a conceptual row from this table
corresponding to a QFP physical entity and its supported
memory resource type upon removal of the QFP host physical
entity or it does not receive memory resource statistics
update for a certain time period. The time period to wait
before deleting an entry from this table would be the
discretion of the supporting device."
::= { ciscoEntityQfp 7 }
ceqfpMemoryResourceEntry OBJECT-TYPE
SYNTAX CeqfpMemoryResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ceqfpMemoryResourceTable. There
is an entry in this table for each QFP entity by a value
of entPhysicalIndex and the supported memory resource type
by a value of ceqfpMemoryResType."
INDEX {
entPhysicalIndex,
ceqfpMemoryResType
}
::= { ceqfpMemoryResourceTable 1 }
CeqfpMemoryResourceEntry ::= SEQUENCE {
ceqfpMemoryResType CiscoQfpMemoryResource,
ceqfpMemoryResTotal Gauge32,
ceqfpMemoryResInUse Gauge32,
ceqfpMemoryResFree Gauge32,
ceqfpMemoryResLowFreeWatermark Gauge32,
ceqfpMemoryResRisingThreshold Unsigned32,
ceqfpMemoryResFallingThreshold Unsigned32,
ceqfpMemoryResTotalOvrflw Gauge32,
ceqfpMemoryHCResTotal CounterBasedGauge64,
ceqfpMemoryResInUseOvrflw Gauge32,
ceqfpMemoryHCResInUse CounterBasedGauge64,
ceqfpMemoryResFreeOvrflw Gauge32,
ceqfpMemoryHCResFree CounterBasedGauge64,
ceqfpMemoryResLowFreeWatermarkOvrflw Gauge32,
ceqfpMemoryHCResLowFreeWatermark CounterBasedGauge64
}
ceqfpMemoryResType OBJECT-TYPE
SYNTAX CiscoQfpMemoryResource
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of the memory resource used by
the QFP. This object is one of the indices to uniquely identify
the QFP memory resource type."
::= { ceqfpMemoryResourceEntry 1 }
ceqfpMemoryResTotal OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total memory available on this memory
resource."
::= { ceqfpMemoryResourceEntry 2 }
ceqfpMemoryResInUse OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the memory which is currently under use
on this memory resource."
::= { ceqfpMemoryResourceEntry 3 }
ceqfpMemoryResFree OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the memory which is currently free on
this memory resource."
::= { ceqfpMemoryResourceEntry 4 }
ceqfpMemoryResLowFreeWatermark OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents lowest free water mark on this memory
resource."
::= { ceqfpMemoryResourceEntry 5 }
ceqfpMemoryResRisingThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the rising threshold value for this
memory resource. A value of zero means that the rising
threshold is not supported for this memory resource.
The value of this object can not be set to lower than or
equal to ceqfpMemoryResFallingThreshold.
A rising (ceqfpMemoryResRisingThreshNotif) notification
will be generated, whenever the memory resource usage
(ceqfpMemoryHCResInUse) is equal to or greater than this
value.
After a rising notification is generated, another such
notification will not be generated until the
ceqfpMemoryResInUse falls below this value and reaches
the ceqfpMemoryResFallingThreshold."
DEFVAL { 90 }
::= { ceqfpMemoryResourceEntry 6 }
ceqfpMemoryResFallingThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the falling threshold value for this
memory resource. A value of zero means that the falling
threshold is not supported for this memory resource.
The value of this object can not be set to higher than or
equal to ceqfpMemoryResRisingThreshold.
A falling (ceqfpMemoryResRisingThreshNotif) notification
will be generated, whenever the memory resource usage
(ceqfpMemoryHCResInUse) is equal to or lesser than this value.
After a falling notification is generated, another
such notification will not be generated until the
ceqfpMemoryResInUse rises above this value and reaches
the ceqfpMemoryResRisingThreshold."
DEFVAL { 85 }
::= { ceqfpMemoryResourceEntry 7 }
ceqfpMemoryResTotalOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
ceqfpMemoryResTotal.
This object needs to be supported only when the value of
ceqfpMemoryResTotal exceeds 32-bit, otherwise this object value
would be set to 0."
::= { ceqfpMemoryResourceEntry 8 }
ceqfpMemoryHCResTotal OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a 64-bit version of ceqfpMemoryResTotal."
::= { ceqfpMemoryResourceEntry 9 }
ceqfpMemoryResInUseOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
ceqfpMemoryResInUse.
This object needs to be supported only when the value of
ceqfpMemoryResInUse exceeds 32-bit, otherwise this object value
would be set to 0."
::= { ceqfpMemoryResourceEntry 10 }
ceqfpMemoryHCResInUse OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a 64-bit version of ceqfpMemoryInRes."
::= { ceqfpMemoryResourceEntry 11 }
ceqfpMemoryResFreeOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of ceqfpMemoryResFree.
This object needs to be supported only when the value of
ceqfpMemoryResFree exceeds 32-bit, otherwise this object value
would be set to 0."
::= { ceqfpMemoryResourceEntry 12 }
ceqfpMemoryHCResFree OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a 64-bit version of ceqfpMemoryResFree."
::= { ceqfpMemoryResourceEntry 13 }
ceqfpMemoryResLowFreeWatermarkOvrflw OBJECT-TYPE
SYNTAX Gauge32
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32-bit of
ceqfpMemoryResLowFreeWatermark. This object needs to be
supported only when the value of ceqfpMemoryResLowFreeWatermark
exceeds 32-bit, otherwise this object value would be set to 0."
::= { ceqfpMemoryResourceEntry 14 }
ceqfpMemoryHCResLowFreeWatermark OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kilo bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a 64-bit version of
ceqfpMemoryResLowFreeWatermark."
::= { ceqfpMemoryResourceEntry 15 }
ceqfpThroughputTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeqfpThroughputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the throughput information for each
QFP physical entity.
An agent creates a conceptual row to this table
corresponding to a QFP physical entity upon detection of a
physical entity supporting the QFP throughput information.
An agent destroys a conceptual row from this table
corresponding to a QFP physical entity upon removal of the QFP
host physical entity."
::= { ciscoEntityQfp 8 }
ceqfpThroughputEntry OBJECT-TYPE
SYNTAX CeqfpThroughputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ceqfpThroughputTable. There is an entry
in this table for each QFP entity, as defined by a value of
entPhysicalIndex."
INDEX { entPhysicalIndex }
::= { ceqfpThroughputTable 1 }
CeqfpThroughputEntry ::= SEQUENCE {
ceqfpThroughputLicensedBW Counter64,
ceqfpThroughputLevel INTEGER,
ceqfpThroughputInterval Integer32,
ceqfpThroughputThreshold Integer32,
ceqfpThroughputAvgRate Counter64
}
ceqfpThroughputLicensedBW OBJECT-TYPE
SYNTAX Counter64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the bandwidth for installed
throughput license."
::= { ceqfpThroughputEntry 1 }
ceqfpThroughputLevel OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
warning(2),
exceed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current throughput level for
installed throughput license.
normal (1) - Throughput usage is normal
warning (2) - Throughput usage has crossed the
configured threshold limit
exceed (3) - Throughput usage has exceeded the
total licensed bandwidth"
::= { ceqfpThroughputEntry 2 }
ceqfpThroughputInterval OBJECT-TYPE
SYNTAX Integer32 (10..86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object represents the configured time interval at which the
ceqfpThroughputLevel is checked."
::= { ceqfpThroughputEntry 3 }
ceqfpThroughputThreshold OBJECT-TYPE
SYNTAX Integer32 (75..95)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object represents the configured throughput threshold."
::= { ceqfpThroughputEntry 4 }
ceqfpThroughputAvgRate OBJECT-TYPE
SYNTAX Counter64
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object represents the average throughput rate in the
interval ceqfpThroughputInterval."
::= { ceqfpThroughputEntry 5 }
ceqfpMemoryResThreshNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls memory resource rising and falling
threshold notification.
When this object contains a value 'true', then generation of
memory resource threshold notification is enabled. If this
object contains a value 'false', then generation of memory
resource threshold notification is disabled."
DEFVAL { false }
::= { ciscoEntityQfpNotif 1 }
ceqfpMemoryResCurrentRisingThresh OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the current rising threshold
value, which triggers the rising threshold notification
(ceqfpMemoryResRisingThreshNotif)."
::= { ciscoEntityQfpNotif 2 }
ceqfpMemoryResCurrentFallingThresh OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percent"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the current falling threshold
value, which triggers the falling threshold notification
(ceqfpMemoryResFallingThreshNotif)."
::= { ciscoEntityQfpNotif 3 }
ceqfpThroughputNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls throughput rate notification.
When this object contains a value 'true', then generation of
ceqfpThroughputNotif is enabled. If this object contains a value
'false', then generation of ceqfpThroughputNotif is disabled."
DEFVAL { false }
::= { ciscoEntityQfpNotif 4 }
ciscoEntityQfpMIBCompliances OBJECT IDENTIFIER
::= { ciscoEntityQfpMIBConform 1 }
ceqfpMemoryResRisingThreshNotif NOTIFICATION-TYPE
OBJECTS {
ceqfpMemoryResInUse,
ceqfpMemoryResCurrentRisingThresh
}
STATUS current
DESCRIPTION
"A notification indicating that the QFP memory usage is rising
the threshold on this memory resource.
This notification will be sent, whenever the QFP memory
usage (ceqfpMemoryResInUse) is equal to or above the
rising threshold (ceqfpMemoryResRisingThreshold).
An agent may throttle the generation of consecutive
ceqfpMemoryResRisingThreshNotif notification so that
there is at least a five second (suggested default)
gap between notification of this type."
::= { ciscoEntityQfpMIBNotifs 1 }
ceqfpMemoryResFallingThreshNotif NOTIFICATION-TYPE
OBJECTS {
ceqfpMemoryResInUse,
ceqfpMemoryResCurrentFallingThresh
}
STATUS current
DESCRIPTION
"A notification indicating that the QFP memory usage is equal
to or below the falling threshold on this memory resource.
This notification will be sent, whenever the QFP memory
usage (ceqfpMemoryResInUse) is equal to or below the
falling threshold (ceqfpMemoryResFallingThreshold).
An agent may throttle the generation of consecutive
ceqfpMemoryResFallingThreshNotif notification so that
there is at least a five second (suggested default)
gap between notification of this type."
::= { ciscoEntityQfpMIBNotifs 2 }
ceqfpThroughputNotif NOTIFICATION-TYPE
OBJECTS {
ceqfpThroughputLicensedBW,
ceqfpThroughputLevel,
ceqfpThroughputAvgRate
}
STATUS current
DESCRIPTION
"A notification indicating that the average throughput rate for
the configured interval has exceeded the threshold or reached
maximum bandwidth allowed.
This notification will be sent, whenever the ceqfpThroughputLevel
object has the value warning(2) or exceed(3). The condition for
trap generation will be checked in every
ceqfpThroughputInterval.
ceqfpThroughputNotif with ceqfpThrougputLevel as warning(2)
indicates that average throughput rate has crossed the
configured threshold.
ceqfpThroughputNotif with ceqfpThrougputLevel as exceed(3)
indicates that average throughput rate has reached maximum
licensed bandwidth."
::= { ciscoEntityQfpMIBNotifs 3 }
ciscoEntityQfpMIBGroups OBJECT IDENTIFIER
::= { ciscoEntityQfpMIBConform 2 }
ciscoEntityQfpMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for CISCO-ENTITY-QFP-MIB"
MODULE -- this module
MANDATORY-GROUPS {
ciscoEntityQfpSystemGroup,
ciscoEntityQfpUtilizationGroup,
ciscoEntityQfpUtilizationAlgoGroup
}
GROUP ciscoEntityQfpMemoryResourceGroup
DESCRIPTION
"This group is optional for the QFP entity, which does not use
the listed memory resources."
GROUP ciscoEntityQfpMemoryResNotifGroup
DESCRIPTION
"This group is optional for the QFP, which does not support the
memory resource."
GROUP ciscoEntityQfpNotifGroup
DESCRIPTION
"This group is optional."
OBJECT ceqfpMemoryResRisingThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not mandatory."
OBJECT ceqfpMemoryResFallingThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not mandatory."
::= { ciscoEntityQfpMIBCompliances 1 }
ciscoEntityQfpMIBComplianceRev2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for CISCO-ENTITY-QFP-MIB.
This compliance module deprecates
ciscoEntityQfpMIBComplianceRev1."
MODULE -- this module
MANDATORY-GROUPS {
ciscoEntityQfpSystemGroup,
ciscoEntityQfpUtilizationGroup,
ciscoEntityQfpUtilizationAlgoGroup
}
GROUP ciscoEntityQfpMemoryResourceGroup
DESCRIPTION
"This group is optional for the QFP entity, which does not use
the listed memory resources."
GROUP ciscoEntityQfpMemoryResourceOvrflwGroup
DESCRIPTION
"This group is optional."
GROUP ciscoEntityQfpMemoryHCResourceGroup
DESCRIPTION
"This group is optional."
GROUP ciscoEntityQfpMemoryResNotifGroup
DESCRIPTION
"This group is optional for the QFP, which does not support the
memory resource."
GROUP ciscoEntityQfpNotifGroup
DESCRIPTION
"This group is optional."
GROUP ceqfpThroughputGroup
DESCRIPTION
"This group is optional."
OBJECT ceqfpMemoryResRisingThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not mandatory."
OBJECT ceqfpMemoryResFallingThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not mandatory."
::= { ciscoEntityQfpMIBCompliances 2 }
ciscoEntityQfpSystemGroup OBJECT-GROUP
OBJECTS {
ceqfpSystemTrafficDirection,
ceqfpSystemState,
ceqfpNumberSystemLoads,
ceqfpSystemLastLoadTime
}
STATUS current
DESCRIPTION
"This group contains collection of QFP system information."
::= { ciscoEntityQfpMIBGroups 1 }
ciscoEntityQfpUtilizationAlgoGroup OBJECT-GROUP
OBJECTS {
ceqfpFiveSecondUtilAlgo,
ceqfpOneMinuteUtilAlgo,
ceqfpFiveMinutesUtilAlgo,
ceqfpSixtyMinutesUtilAlgo
}
STATUS current
DESCRIPTION
"This group contains collection of QFP utilization algorithm
objects."
::= { ciscoEntityQfpMIBGroups 2 }
-- Units of Conformance
ciscoEntityQfpUtilizationGroup OBJECT-GROUP
OBJECTS {
ceqfpUtilInputPriorityPktRate,
ceqfpUtilInputPriorityBitRate,
ceqfpUtilInputNonPriorityPktRate,
ceqfpUtilInputNonPriorityBitRate,
ceqfpUtilInputTotalPktRate,
ceqfpUtilInputTotalBitRate,
ceqfpUtilOutputPriorityPktRate,
ceqfpUtilOutputPriorityBitRate,
ceqfpUtilOutputNonPriorityPktRate,
ceqfpUtilOutputNonPriorityBitRate,
ceqfpUtilOutputTotalPktRate,
ceqfpUtilOutputTotalBitRate,
ceqfpUtilProcessingLoad
}
STATUS current
DESCRIPTION
"This group contains collection of QFP utilization information."
::= { ciscoEntityQfpMIBGroups 3 }
ciscoEntityQfpMemoryResourceGroup OBJECT-GROUP
OBJECTS {
ceqfpMemoryResTotal,
ceqfpMemoryResInUse,
ceqfpMemoryResFree,
ceqfpMemoryResLowFreeWatermark,
ceqfpMemoryResRisingThreshold,
ceqfpMemoryResFallingThreshold
}
STATUS current
DESCRIPTION
"This group contains collection of QFP memory resource
information."
::= { ciscoEntityQfpMIBGroups 4 }
ciscoEntityQfpNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ceqfpMemoryResRisingThreshNotif,
ceqfpMemoryResFallingThreshNotif,
ceqfpThroughputNotif
}
STATUS current
DESCRIPTION
"This group contains collection of QFP notifications."
::= { ciscoEntityQfpMIBGroups 5 }
ciscoEntityQfpMemoryResNotifGroup OBJECT-GROUP
OBJECTS {
ceqfpMemoryResThreshNotifEnabled,
ceqfpMemoryResCurrentRisingThresh,
ceqfpMemoryResCurrentFallingThresh
}
STATUS current
DESCRIPTION
"This group contains memory resource notification control
objects."
::= { ciscoEntityQfpMIBGroups 6 }
ciscoEntityQfpMemoryResourceOvrflwGroup OBJECT-GROUP
OBJECTS {
ceqfpMemoryResTotalOvrflw,
ceqfpMemoryResInUseOvrflw,
ceqfpMemoryResFreeOvrflw,
ceqfpMemoryResLowFreeWatermarkOvrflw
}
STATUS current
DESCRIPTION
"This group contains collection of upper 32-bit QFP memory
resource
information."
::= { ciscoEntityQfpMIBGroups 7 }
ciscoEntityQfpMemoryHCResourceGroup OBJECT-GROUP
OBJECTS {
ceqfpMemoryHCResTotal,
ceqfpMemoryHCResInUse,
ceqfpMemoryHCResFree,
ceqfpMemoryHCResLowFreeWatermark
}
STATUS current
DESCRIPTION
"This group contains collection of high capacity(HC) objects of
QFP memory resource information."
::= { ciscoEntityQfpMIBGroups 8 }
ceqfpThroughputGroup OBJECT-GROUP
OBJECTS {
ceqfpThroughputLicensedBW,
ceqfpThroughputLevel,
ceqfpThroughputInterval,
ceqfpThroughputThreshold,
ceqfpThroughputAvgRate,
ceqfpThroughputNotifEnabled
}
STATUS current
DESCRIPTION
"This group contains collection of throughput rate information."
::= { ciscoEntityQfpMIBGroups 9 }
END
Reference in New Issue Copy Permalink