mibs/MIBS/cisco/CISCO-IETF-PW-FR-MIB

566 lines
18 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-IETF-PW-FR-MIB.my: Pseudo Wire Frame Relay MIB file
--
-- December 2003, Danny Lee,
-- George Wilkie
--
-- Copyright (c) 2003-2004 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-IETF-PW-FR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI
ciscoExperiment
FROM CISCO-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
StorageType,
RowStatus
FROM SNMPv2-TC
CpwVcIndexType
FROM CISCO-IETF-PW-TC-MIB
InterfaceIndexOrZero
FROM IF-MIB
DlciNumber
FROM CISCO-FRAME-RELAY-MIB;
cpwVcFrMIB MODULE-IDENTITY
LAST-UPDATED "200312160000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
SA
Tel: +1 800 553-NETS
Email: cs-framerelay@cisco.com"
DESCRIPTION
"Cisco Pseudo Wire Frame Relay MIB
This MIB describes network management objects defined
for FRoPW services over a Packet Switched Network (PSN).
As described in the IETF Frame Relay over
Pseudowire (FRoPW) draft,
draft-ietf-pwe3-frame-relay-01.txt,
FR VCs and PW can be mapped in 2 modes:
One-to-one mapping mode: a FR VC is mapped
to a PW. This mode is described by cpwVcFrTable.
Many-to-one mapping mode (a.k.a. port mode):
multiple FR VCs assigned to a port are mapped to a PW.
This mode is addressed by cpwVcFrPortModeTable.
In this mode, all data frames are directed to the
associated PSN tunnel regardless of DLCI."
REVISION "200312160000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoExperiment 112 }
-- Top-level components of this MIB
cpwVcFrNotifications OBJECT IDENTIFIER ::= { cpwVcFrMIB 0 }
cpwVcFrObjects OBJECT IDENTIFIER ::= { cpwVcFrMIB 1 }
cpwVcFrConformance OBJECT IDENTIFIER ::= { cpwVcFrMIB 2 }
--
--
-- PW-FR VC Table
cpwVcFrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcFrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PW-FR connection table.
Each entry in this table represents a FRoPW
connection operating in one-to-one mapping mode.
This table uses the same index as the generic
PW MIB's VC table. Therefore, each entry in
cpwVcFrTable has a mapping entry to the
generic PW MIB VC table associated by the
PW VC index.
An entry is created in this table by the agent
for every entry in the generic PW MIB VC table
with a VcType of 'frameRelay'."
::= { cpwVcFrObjects 1 }
cpwVcFrEntry OBJECT-TYPE
SYNTAX CpwVcFrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cpwVcFrTable."
INDEX { cpwVcFrPwVcIndex }
::= { cpwVcFrTable 1 }
CpwVcFrEntry ::= SEQUENCE {
cpwVcFrPwVcIndex CpwVcIndexType,
cpwVcFrIfIndex InterfaceIndexOrZero,
cpwVcFrDlci DlciNumber,
cpwVcFrAdminStatus INTEGER,
cpwVcFrOperStatus INTEGER,
cpwVcFrPw2FrOperStatus INTEGER,
cpwVcFrRowStatus RowStatus,
cpwVcFrStorageType StorageType
}
cpwVcFrPwVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the index to an entry
in the generic PW table."
::= { cpwVcFrEntry 1 }
cpwVcFrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the index to an entry
in the IF-MIB table. In this case, it holds
the ifIndex value of the Frame Relay interface
associating with the PW connection.
The value of zero means that the InterfaceIndex is
not known yet."
DEFVAL { 0 }
::= { cpwVcFrEntry 2 }
cpwVcFrDlci OBJECT-TYPE
SYNTAX DlciNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the FR DLCI associating
with this entry in cpwVcFrTable.
This object can be used together with cpwVcFrIfIndex
to lookup FR VC specific information for the FR PVC
segment of a FRoPW connection."
::= { cpwVcFrEntry 3 }
cpwVcFrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of this object indicates the
administrative status of the FRoPW connection.
The values mean:
up(1) - connection is administratively set to
the 'up' state for handling traffic.
down(2) - connection is administratively set to
the 'down' state. No traffic is processed
at this state."
::= { cpwVcFrEntry 4 }
cpwVcFrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is actual operational status of the logical
FRoPW connection, which is derived from combining
the following 2 operational status:
cpwVcFrPw2FrOperStatus
Operational status of the FR segment on the FRoPW
connection.
PW Operation Status
Operational status of the PW segment of the FRoPW
connection. The associated object is cpwVcOperStatus
from the generic PW MIB."
::= { cpwVcFrEntry 5 }
cpwVcFrPw2FrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object identifies the current
operational status of the FR PVC segment of a
FRoPW connection.
The values mean:
active(1) - segment is currently operational.
inactive(2) - segment in currently not operational.
unknown(3) - segment current status cannot be
determined."
::= { cpwVcFrEntry 6 }
cpwVcFrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { cpwVcFrEntry 7 }
cpwVcFrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the storage type of this row."
::= { cpwVcFrEntry 8 }
-- (End of cpwVcFrTable)
--
--
--
--
-- PW-FR Port Mode VC Table
cpwVcFrPMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcFrPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PW-FR port mode connection table.
Each entry in this table represents a FRoPW
connection operating in the port mode.
This table uses the same index as the generic
PW MIB's VC table. Therefore, each entry in
cpwVcFrTable has a mapping entry to the
generic PW MIB VC table associated by the
PW VC index.
An entry is created in this table by the agent
for every entry in the generic PW MIB VC table
with a VcType of 'frameRelayPortMode'."
::= { cpwVcFrObjects 2 }
cpwVcFrPMEntry OBJECT-TYPE
SYNTAX CpwVcFrPMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in cpwVcFrPMTable."
INDEX { cpwVcFrPMPwVcIndex }
::= { cpwVcFrPMTable 1 }
CpwVcFrPMEntry ::= SEQUENCE {
cpwVcFrPMPwVcIndex CpwVcIndexType,
cpwVcFrPMIfIndex InterfaceIndexOrZero,
cpwVcFrPMAdminStatus INTEGER,
cpwVcFrPMOperStatus INTEGER,
cpwVcFrPMPw2FrOperStatus INTEGER,
cpwVcFrPMRowStatus RowStatus,
cpwVcFrPMStorageType StorageType
}
cpwVcFrPMPwVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the index to an entry
in the generic PW table."
::= { cpwVcFrPMEntry 1 }
cpwVcFrPMIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the FR port associating with
the FRoPW connection operating in port mode.
The value in the index identifies an entry in the
IF-MIB table.
The value of zero means that the InterfaceIndex is
not known yet."
::= { cpwVcFrPMEntry 2 }
cpwVcFrPMAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of this object indicates the
administrative status of the FRoPW connection.
The values mean:
up(1) - connection is administratively set to
the 'up' state for handling traffic.
down(2) - connection is administratively set to
the 'down' state. No traffic is processed
at this state."
::= { cpwVcFrPMEntry 3 }
cpwVcFrPMOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is actual operational status of the logical
FRoPW connection in port mode, which is derived
from combining the following 2 operational status:
cpwVcFrPMPw2FrOperStatus
Operational status of the FR segment on the FRoPW
connection.
PW Operation Status
Operational status of the PW segment of the FRoPW
connection. The associated object is cpwVcOperStatus
from the generic PW MIB."
::= { cpwVcFrPMEntry 4 }
cpwVcFrPMPw2FrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object identifies the current
operational status of the associate FR port.
The values mean:
active(1) - segment is currently operational.
inactive(2) - segment in currently not operational.
unknown(3) - segment current status cannot be
determined."
::= { cpwVcFrPMEntry 5 }
cpwVcFrPMRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { cpwVcFrPMEntry 6 }
cpwVcFrPMStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the storage type of this row."
::= { cpwVcFrPMEntry 7 }
-- (End of cpwVcFrPMTable)
--
--
-- Conformance Information
cpwVcFrCompliances OBJECT IDENTIFIER
::= { cpwVcFrConformance 1 }
cpwVcFrGroups OBJECT IDENTIFIER
::= { cpwVcFrConformance 2 }
-- Compliance requirement for read-write implementations.
cpwVcFrFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide
full support for the PW-FR-MIB module."
MODULE -- this module
MANDATORY-GROUPS { cpwVcFrGroup
}
GROUP cpwVcFrPMGroup
DESCRIPTION
"This group is mandatory only for the software
which supports Pseudowire Frame Relay Port Mode."
OBJECT cpwVcFrRowStatus
SYNTAX RowStatus
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
OBJECT cpwVcFrPMRowStatus
SYNTAX RowStatus
DESCRIPTION
"Support for notReady(3) and createAndWait(5) is
not required."
::= { cpwVcFrCompliances 1 }
-- Compliance requirement for read-only implementations.
cpwVcFrReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that only
provide read-only support for the PW-FR-MIB module."
MODULE -- this module
MANDATORY-GROUPS { cpwVcFrGroup
}
GROUP cpwVcFrPMGroup
DESCRIPTION
"This group is mandatory only for the software
which supports Pseudowire Frame Relay Port Mode."
OBJECT cpwVcFrIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrDlci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrOperStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPw2FrOperStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPMIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPMAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPMOperStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPMPw2FrOperStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPMRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cpwVcFrPMStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cpwVcFrCompliances 2 }
-- units of conformance:
cpwVcFrGroup OBJECT-GROUP
OBJECTS {
cpwVcFrIfIndex,
cpwVcFrDlci,
cpwVcFrAdminStatus,
cpwVcFrOperStatus,
cpwVcFrPw2FrOperStatus,
cpwVcFrRowStatus,
cpwVcFrStorageType
}
STATUS current
DESCRIPTION
"Objects to support cpwVcFrTable."
::= { cpwVcFrGroups 1 }
cpwVcFrPMGroup OBJECT-GROUP
OBJECTS {
cpwVcFrPMIfIndex,
cpwVcFrPMAdminStatus,
cpwVcFrPMOperStatus,
cpwVcFrPMPw2FrOperStatus,
cpwVcFrPMRowStatus,
cpwVcFrPMStorageType
}
STATUS current
DESCRIPTION
"Objects to support cpwVcFrPMTable."
::= { cpwVcFrGroups 2 }
END