david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-IETF-PW-MPLS-MIB

925 lines
34 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-IETF-PW-MPLS-MIB.my
--
-- February 2003, Tim Swanson
--
-- Copyright (c) 2003, 2006 by cisco Systems, Inc.
-- All rights reserved.
--
-- Made Cisco Proprietary based on IETF draft:
-- draft-ietf-pwe3-pw-mpls-mib-00.txt
-- *****************************************************************
CISCO-IETF-PW-MPLS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus, StorageType
FROM SNMPv2-TC
InterfaceIndexOrZero
FROM IF-MIB
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsLdpIdentifier, MplsLsrIdentifier
FROM MPLS-TC-STD-MIB
CpwVcIndexType
FROM CISCO-IETF-PW-TC-MIB
cpwVcIndex
FROM CISCO-IETF-PW-MIB
ciscoExperiment
FROM CISCO-SMI
;
cpwVcMplsMIB MODULE-IDENTITY
LAST-UPDATED "200302261200Z" -- 26 Feb 2003 12:00:00 GMT
ORGANIZATION
"Cisco Systems, Inc."
CONTACT-INFO
"
Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01824
Tel: +1-978-497-3051
Email: tnadeau@cisco.com
MPLS MIB Development Team
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01924
Tel: +1-978-497-3989
Email: ch-mpls-mib-dev@cisco.com
"
DESCRIPTION
"This MIB complements the CISCO-IETF-PW-MIB for PW operation
over MPLS.
"
-- Revision history.
REVISION "200302261200Z" -- 26 Feb 2003 12:00:00 GMT
DESCRIPTION
"Made Cisco proprietary based on the PW-MPLS-MIB.my file
extracted from draft-ietf-pwe3-pw-mpls-mib-00.txt
"
REVISION
"200206021200Z" -- 02 June 2002 12:00:00 EST
DESCRIPTION
"Draft-ietf-pwe3-pw-mpls-mib-00 version. Changes from
previous version:
1) Spliting the mapping table into two tables, one for
Non TE application and one for TE application.
2) Object types alignment with MPLS MIBs.
"
REVISION
"200201291200Z" -- 29 January 2002 12:00:00 EST
DESCRIPTION
"Changes from previous version:
1) Add LDP entity association.
2) Clarify inbound/outbound directions.
3) Simplify indexing of outbound and inbound tables
and providing get next variables.
"
REVISION
"200107111200Z" -- 7 November 2001 12:00:00 EST
DESCRIPTION
"Changes from previous version:
1) Remove Vc instance from table indexing.
2) Update descriptions of indexing and protection.
3) Remove the need for MPLS-LSR in case of VC only.
4) Change pwVcMplsMplsType to BITS in order to enable
multiple types of outer tunnel.
5) Add ifindex to outer tunnel tables to support vcOnly
option.
6) change naming of outbound, inbound and mapping tables to
reflect addition of VC only port ifindexes.
7) Adapt order of items in mapping table to SNMP convention.
"
REVISION
"200107111200Z" -- July 11 2001 12:00:00 EST
DESCRIPTION
"draft-zelig-pw-mib-00.txt - initial version"
::= { ciscoExperiment 107 }
-- Top-level components of this MIB.
-- Traps
cpwVcMplsNotifications OBJECT IDENTIFIER
::= { cpwVcMplsMIB 0 }
cpwVcMplsNotifyPrefix OBJECT IDENTIFIER
::= { cpwVcMplsNotifications 0 }
-- Tables, Scalars
cpwVcMplsObjects OBJECT IDENTIFIER
::= { cpwVcMplsMIB 1 }
-- Conformance
cpwVcMplsConformance OBJECT IDENTIFIER
::= { cpwVcMplsMIB 2 }
-- PW VC MPLS table
cpwVcMplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcMplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for VC to be carried over
MPLS PSN."
::= { cpwVcMplsObjects 1 }
cpwVcMplsEntry OBJECT-TYPE
SYNTAX CpwVcMplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents parameters specific to MPLS
PSN for a pseudo wire connection (VC). The row is created
automatically by the local agent if the cpwVcPsnType is
MPLS. It is indexed by cpwVcIndex, which uniquely
identifying a singular connection.
"
INDEX { cpwVcIndex }
::= { cpwVcMplsTable 1 }
CpwVcMplsEntry ::= SEQUENCE {
cpwVcMplsMplsType BITS,
cpwVcMplsExpBitsMode INTEGER,
cpwVcMplsExpBits Unsigned32,
cpwVcMplsTtl Unsigned32,
cpwVcMplsLocalLdpID MplsLdpIdentifier,
cpwVcMplsLocalLdpEntityID Unsigned32,
cpwVcMplsPeerLdpID MplsLdpIdentifier,
cpwVcMplsStorageType StorageType
}
cpwVcMplsMplsType OBJECT-TYPE
SYNTAX BITS {
mplsTe (0),
mplsNonTe (1),
vcOnly (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set by the operator to indicate the outer tunnel types, if
exists. mplsTe is used if the outer tunnel was set-up by
MPLS-TE, and mplsNonTe is used the outer tunnel was set up
by LDP or manually. Combination of mplsTe and mplsNonTe
may exist in case of outer tunnel protection.
vcOnly is used if there is no outer tunnel label. vcOnly
cannot be combined with mplsNonTe or mplsTe."
::= { cpwVcMplsEntry 1 }
cpwVcMplsExpBitsMode OBJECT-TYPE
SYNTAX INTEGER {
outerTunnel (1),
specifiedValue (2),
serviceDependant (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set by the operator to indicate the way the VC shim label
EXP bits are to be determined. The value of outerTunnel(1)
is used where there is an outer tunnel - cpwVcMplsMplsType
is mplsTe or mplsNonTe. Note that in this case there is no
need to mark the VC label with the EXP bits since the VC
label is not visible to the intermediate nodes.
If there is no outer tunnel, specifiedValue(2) indicate
that the value is specified by cpwVcMplsExpBits, and
serviceDependant(3) indicate that the EXP bits are setup
based on a rule specified in the emulated service specific
tables, for example when the EXP bits are a function of
802.1p marking for Ethernet emulated service."
REFERENCE
"martini et al, <draft-martini-l2circuit-encap-mpls.txt>"
DEFVAL { outerTunnel }
::= { cpwVcMplsEntry 2 }
cpwVcMplsExpBits OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set by the operator to indicate the MPLS EXP bits to be
used on the VC shim label if cpwVcMplsExpBitsMode is
specifiedValue(2), zero otherwise."
DEFVAL { 0 }
::= { cpwVcMplsEntry 3 }
cpwVcMplsTtl OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set by the operator to indicate the VC TTL bits to be used
on the VC shim label."
REFERENCE
"martini et al, <draft-martini-l2circuit-encap-mpls> "
DEFVAL { 2 }
::= { cpwVcMplsEntry 4 }
cpwVcMplsLocalLdpID OBJECT-TYPE
SYNTAX MplsLdpIdentifier
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local LDP identifier of the LDP entity creating
this VC in the local node. As the VC labels are always
set from the per platform label space, the last two octets
in the LDP ID MUST be always both zeros."
REFERENCE
"<draft-ietf-ldp-mib>,
<draft-martini-l2circuit-encap-mpls>.
"
::= { cpwVcMplsEntry 5 }
cpwVcMplsLocalLdpEntityID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local LDP Entity index of the LDP entity to be used
for this VC on the local node. Should be set to all zeros
if not used."
REFERENCE
"<draft-ietf-ldp-mib>
"
::= { cpwVcMplsEntry 6 }
cpwVcMplsPeerLdpID OBJECT-TYPE
SYNTAX MplsLdpIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer LDP identifier as identified from the LDP
session. Should be zero if not relevant or not known yet."
REFERENCE
"<draft-ietf-ldp-mib>,
<draft-martini-l2circuit-encap-mpls>.
"
::= { cpwVcMplsEntry 7 }
cpwVcMplsStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
::= { cpwVcMplsEntry 8 }
-- End of PW MPLS VC table
-- Pseudo Wire VC MPLS Outbound Tunnel table
cpwVcMplsOutboundIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to
be used for cpwVcMplsOutboundIndex when creating
entries in the cpwVcMplsOutboundTable. The value
0 indicates that no unassigned entries are
available. To obtain the cpwVcMplsOutboundIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index, however the agent MUST
NOT assume such retrieval will be done for each
row created."
::= { cpwVcMplsObjects 2 }
cpwVcMplsOutboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcMplsOutboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table associates VCs using MPLS PSN with the outbound
MPLS tunnels (i.e. toward the PSN) or the physical
interface in case of VC only."
::= { cpwVcMplsObjects 3 }
cpwVcMplsOutboundEntry OBJECT-TYPE
SYNTAX CpwVcMplsOutboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a link between PW VC (that
require MPLS tunnels) and MPLS tunnel toward the PSN.
In the case of VC only, it associate the VC with the
interface that shall carry the VC.
This table is indexed by the pwVcIndex and an additional
index enabling multiple rows for the same VC index.
At least one entry is created in this table by the operator
for each PW VC that requires MPLS PSN. Note that the first
entry for each VC can be indexed by cpwVcMplsOutboundIndex
equal zero without a need for retrieval of
cpwVcMplsOutboundIndexNext.
This table points to the appropriate MPLS MIB. In the case
of MPLS-TE, the 4 variables relevant to the indexing of
a TE MPLS tunnel are set as in Srinivasan, et al, <draft-
ietf-mpls-te-mib>.
In case of Non-TE MPLS (an outer tunnel label assigned by
LDP or manually) the table points to the XC entry in the
LSR MIB as in Srinivasan, et al, <draft-ietf-mpls-lsr-mib>.
In case of VC only (no outer tunnel) the ifIndex of the
port to carry the VC is configured.
Each VC may have multiple rows in this tables if protection
is available at the outer tunnel level, each row may be of
different type except for VC only, on which only rows with
ifIndex of the port are allowed.
"
INDEX { cpwVcIndex, cpwVcMplsOutboundIndex }
::= { cpwVcMplsOutboundTable 1 }
CpwVcMplsOutboundEntry ::= SEQUENCE {
cpwVcMplsOutboundIndex Unsigned32,
cpwVcMplsOutboundLsrXcIndex Unsigned32,
cpwVcMplsOutboundTunnelIndex MplsTunnelIndex,
cpwVcMplsOutboundTunnelInstance MplsTunnelInstanceIndex,
cpwVcMplsOutboundTunnelLclLSR MplsLsrIdentifier,
cpwVcMplsOutboundTunnelPeerLSR MplsLsrIdentifier,
cpwVcMplsOutboundIfIndex InterfaceIndexOrZero,
cpwVcMplsOutboundRowStatus RowStatus,
cpwVcMplsOutboundStorageType StorageType
}
cpwVcMplsOutboundIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arbitrary index for enabling multiple rows per VC in
this table. Next available free index can be retrieved
using cpwVcMplsOutboundIndexNext.
"
::= { cpwVcMplsOutboundEntry 1 }
cpwVcMplsOutboundLsrXcIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object will be set by the operator. If the outer
label is defined in the MPL-LSR-MIB, i.e. set by LDP
or manually, this object points to the XC index
of the outer tunnel. Otherwise, it is set to zero."
::= { cpwVcMplsOutboundEntry 2 }
cpwVcMplsOutboundTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsOutboundEntry 3 }
cpwVcMplsOutboundTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsOutboundEntry 4 }
cpwVcMplsOutboundTunnelLclLSR OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsOutboundEntry 5 }
cpwVcMplsOutboundTunnelPeerLSR OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsOutboundEntry 6 }
cpwVcMplsOutboundIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In case of VC only (no outer tunnel), this object holds
the ifIndex of the outbound port, otherwise set to zero."
::= { cpwVcMplsOutboundEntry 7 }
cpwVcMplsOutboundRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { cpwVcMplsOutboundEntry 8 }
cpwVcMplsOutboundStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this object."
::= { cpwVcMplsOutboundEntry 9 }
-- End of Pseudo Wire VC MPLS Outbound Tunnel table
-- Pseudo Wire VC MPLS Inbound Tunnel table
cpwVcMplsInboundIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to
be used for cpwVcMplsInboundIndex when creating
entries in the cpwVcMplsInboundTable. The value
0 indicates that no unassigned entries are
available. To obtain the cpwVcMplsInboundIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index, however the agent MUST
NOT assume such retrieval will be done for each
row created."
::= { cpwVcMplsObjects 4 }
cpwVcMplsInboundTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcMplsInboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table associates VCs using MPLS PSN with the inbound
MPLS tunnels (i.e. for packets coming from the PSN),
if such association is desired (mainly for security
reasons)."
::= { cpwVcMplsObjects 5 }
cpwVcMplsInboundEntry OBJECT-TYPE
SYNTAX CpwVcMplsInboundEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a link between PW VCs (that
require MPLS tunnels) and MPLS tunnel for packets arriving
from the PSN.
This table is indexed by the set of indexes used to
identify the VC - cpwVcIndex and an additional
index enabling multiple rows for the same VC index.
Note that the first entry for each VC can be indexed by
cpwVcMplsOutboundIndex equal zero without a need for
retrieval of cpwVcMplsInboundIndexNext.
An entry is created in this table either automatically by
the local agent or created manually by the operator in
cases that strict mode is required.
Note that the control messages contain VC ID and VC type,
which together with the remote IP address identify the
cpwVcIndex in the local node.
This table points to the appropriate MPLS MIB. In the case
of MPLS-TE, the 4 variables relevant to the indexing of a
TE MPLS tunnel are set as in Srinivasan, et al, <draft-
ietf-mpls-te-mib>.
In case of non-TE MPLS tunnel (an outer tunnel label
assigned by LDP or manually) the table points to the XC
entry in the MPLS-LSR-MIB as in Srinivasan, et al, <draft-
ietf-mpls-lsr-mib>.
Each VC may have multiple rows in this tables if protection
is available at the outer tunnel level, each row may be of
different type except for VC only, on which only rows with
ifIndex of the port are allowed.
"
INDEX { cpwVcIndex, cpwVcMplsInboundIndex }
::= { cpwVcMplsInboundTable 1 }
CpwVcMplsInboundEntry ::= SEQUENCE {
cpwVcMplsInboundIndex Unsigned32,
cpwVcMplsInboundLsrXcIndex Unsigned32,
cpwVcMplsInboundTunnelIndex MplsTunnelIndex,
cpwVcMplsInboundTunnelInstance MplsTunnelInstanceIndex,
cpwVcMplsInboundTunnelLclLSR MplsLsrIdentifier,
cpwVcMplsInboundTunnelPeerLSR MplsLsrIdentifier,
cpwVcMplsInboundIfIndex InterfaceIndexOrZero,
cpwVcMplsInboundRowStatus RowStatus,
cpwVcMplsInboundStorageType StorageType
}
cpwVcMplsInboundIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Arbitrary index for enabling multiple rows per VC in
this table. Next available free index can be retrieved
using cpwVcMplsInboundIndexNext.
"
::= { cpwVcMplsInboundEntry 1 }
cpwVcMplsInboundLsrXcIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the outer label is defined in the MPL-LSR-MIB, i.e. set
by LDP or manually, this object points to the XC index
of the outer tunnel. Otherwise, it is set to zero."
::= { cpwVcMplsInboundEntry 2 }
cpwVcMplsInboundTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsInboundEntry 3 }
cpwVcMplsInboundTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsInboundEntry 4 }
cpwVcMplsInboundTunnelLclLSR OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsInboundEntry 5 }
cpwVcMplsInboundTunnelPeerLSR OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Part of set of indexes for outbound tunnel in the case of
MPLS-TE outer tunnel, otherwise set to zero."
::= { cpwVcMplsInboundEntry 6 }
cpwVcMplsInboundIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"In case of VC only (no outer tunnel), this object holds the
ifIndex of the inbound port, otherwise set to zero."
::= { cpwVcMplsInboundEntry 7 }
cpwVcMplsInboundRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { cpwVcMplsInboundEntry 8 }
cpwVcMplsInboundStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
::= { cpwVcMplsInboundEntry 9 }
-- End of Pseudo Wire VC MPLS Inbound Tunnel table
-- MPLS to VC Mapping Tables.
cpwVcMplsNonTeMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcMplsNonTeMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps an inbound/outbound Tunnel to a VC in non-
TE applications."
::= { cpwVcMplsObjects 6 }
cpwVcMplsNonTeMappingEntry OBJECT-TYPE
SYNTAX CpwVcMplsNonTeMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the association
between the PW VC and it's non TE MPLS outer Tunnel
it's physical interface if there is no outer tunnel
(VC only).
An application can use this table to quickly retrieve the
PW carried over specific non-TE MPLS outer tunnel or
physical interface.
The table in indexed by the XC index for MPLS Non-TE
tunnel, or ifIndex of the port in VC only case, the
direction of the VC in the specific entry and the VCIndex.
The same table is used in both inbound and outbound
directions, but in a different row for each direction. If
the inbound association is not known, no rows should exist
for it.
Rows are created by the local agent when all the
association data is available for display."
INDEX { cpwVcMplsNonTeMappingTunnelDirection,
cpwVcMplsNonTeMappingXcTunnelIndex,
cpwVcMplsNonTeMappingIfIndex,
cpwVcMplsNonTeMappingVcIndex }
::= { cpwVcMplsNonTeMappingTable 1 }
CpwVcMplsNonTeMappingEntry ::= SEQUENCE {
cpwVcMplsNonTeMappingTunnelDirection INTEGER,
cpwVcMplsNonTeMappingXcTunnelIndex Unsigned32,
cpwVcMplsNonTeMappingIfIndex InterfaceIndexOrZero,
cpwVcMplsNonTeMappingVcIndex CpwVcIndexType
}
cpwVcMplsNonTeMappingTunnelDirection OBJECT-TYPE
SYNTAX INTEGER {
outbound (1), -- From the PE toward the PSN
inbound (2) -- From the PSN into the PE
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies if the row represent an outbound or inbound
mapping."
::= { cpwVcMplsNonTeMappingEntry 1 }
cpwVcMplsNonTeMappingXcTunnelIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index for the conceptual XC row identifying Tunnel to VC
mappings when the outer tunnel is created by the MPLS-LSR-
MIB, Zero otherwise."
::= { cpwVcMplsNonTeMappingEntry 2 }
cpwVcMplsNonTeMappingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identify the port on which the VC is carried for VC only
case."
::= { cpwVcMplsNonTeMappingEntry 3 }
cpwVcMplsNonTeMappingVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that represent the VC in the cpwVcTable."
::= { cpwVcMplsNonTeMappingEntry 4 }
-- End of Non-TE MPLS Tunnel to VC Mapping Table
cpwVcMplsTeMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpwVcMplsTeMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maps an inbound/outbound Tunnel to a VC in
MPLS-TE applications."
::= { cpwVcMplsObjects 7 }
cpwVcMplsTeMappingEntry OBJECT-TYPE
SYNTAX CpwVcMplsTeMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the association
between a PW VC and it's MPLS-TE outer Tunnel.
An application can use this table to quickly retrieve the
PW carried over specific TE MPLS outer tunnel.
The table in indexed by the 4 indexes of a TE tunnel,
the direction of the VC specific entry and the VcIndex.
The same table is used in both inbound and outbound
directions, a different row for each direction. If the
inbound association is not known, no rows should exist for
it.
Rows are created by the local agent when all the
association data is available for display."
INDEX { cpwVcMplsTeMappingTunnelDirection,
cpwVcMplsTeMappingTunnelIndex,
cpwVcMplsTeMappingTunnelInstance,
cpwVcMplsTeMappingTunnelPeerLsrID,
cpwVcMplsTeMappingTunnelLocalLsrID,
cpwVcMplsTeMappingVcIndex }
::= { cpwVcMplsTeMappingTable 1 }
CpwVcMplsTeMappingEntry ::= SEQUENCE {
cpwVcMplsTeMappingTunnelDirection INTEGER,
cpwVcMplsTeMappingTunnelIndex MplsTunnelIndex,
cpwVcMplsTeMappingTunnelInstance MplsTunnelInstanceIndex,
cpwVcMplsTeMappingTunnelPeerLsrID MplsLsrIdentifier,
cpwVcMplsTeMappingTunnelLocalLsrID MplsLsrIdentifier,
cpwVcMplsTeMappingVcIndex CpwVcIndexType
}
cpwVcMplsTeMappingTunnelDirection OBJECT-TYPE
SYNTAX INTEGER {
outbound (1), -- From the PE toward the PSN
inbound (2) -- From the PSN into the PE
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies if the row represent an outbound or inbound
mapping."
::= { cpwVcMplsTeMappingEntry 1 }
cpwVcMplsTeMappingTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index for the conceptual row identifying the
MPLS-TE tunnel."
::= { cpwVcMplsTeMappingEntry 2 }
cpwVcMplsTeMappingTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies an instance of the MPLS-TE tunnel."
::= { cpwVcMplsTeMappingEntry 3 }
cpwVcMplsTeMappingTunnelPeerLsrID OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies an Peer LSR when the outer tunnel is MPLS-TE
based."
::= { cpwVcMplsTeMappingEntry 4 }
cpwVcMplsTeMappingTunnelLocalLsrID OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the local LSR."
::= { cpwVcMplsTeMappingEntry 5 }
cpwVcMplsTeMappingVcIndex OBJECT-TYPE
SYNTAX CpwVcIndexType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value that represent the VC in the cpwVcTable."
::= { cpwVcMplsTeMappingEntry 6 }
-- End of TE MPLS Tunnel to VC Mapping Table
-- Notifications - PW over MPLS - FFS
-- End of notifications.
-- conformance information
-- Note: Conformance at the object access and values level is
-- still FFS, therefore current conformance is defined at the
-- object existence level only.
cpwVcMplsGroups OBJECT IDENTIFIER ::= { cpwVcMplsConformance 1 }
cpwVcMplsCompliances OBJECT IDENTIFIER ::= { cpwVcMplsConformance 2 }
cpwMplsModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agent that support PW
over MPLS PSN operation."
MODULE -- this module
MANDATORY-GROUPS { cpwVcMplsGroup,
cpwVcMplsOutboundGroup,
cpwVcMplsMappingGroup
}
GROUP cpwVcMplsInboundGroup
DESCRIPTION
"This group is mandatory for those PE that support PW
over MPLS PSN."
::= { cpwVcMplsCompliances 1 }
-- Units of conformance.
cpwVcMplsGroup OBJECT-GROUP
OBJECTS {
cpwVcMplsMplsType,
cpwVcMplsExpBitsMode,
cpwVcMplsExpBits,
cpwVcMplsTtl,
cpwVcMplsLocalLdpID,
cpwVcMplsLocalLdpEntityID,
cpwVcMplsPeerLdpID,
cpwVcMplsStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for PW VC
over MPLS PSN configuration."
::= { cpwVcMplsGroups 1 }
cpwVcMplsOutboundGroup OBJECT-GROUP
OBJECTS {
cpwVcMplsOutboundIndexNext,
cpwVcMplsOutboundLsrXcIndex,
cpwVcMplsOutboundTunnelIndex,
cpwVcMplsOutboundTunnelInstance,
cpwVcMplsOutboundTunnelLclLSR,
cpwVcMplsOutboundTunnelPeerLSR,
cpwVcMplsOutboundIfIndex,
cpwVcMplsOutboundRowStatus,
cpwVcMplsOutboundStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for outbound association of
VC and MPLS tunnel."
::= { cpwVcMplsGroups 2 }
cpwVcMplsInboundGroup OBJECT-GROUP
OBJECTS {
cpwVcMplsInboundIndexNext,
cpwVcMplsInboundLsrXcIndex,
cpwVcMplsInboundTunnelIndex,
cpwVcMplsInboundTunnelInstance,
cpwVcMplsInboundTunnelLclLSR,
cpwVcMplsInboundTunnelPeerLSR,
cpwVcMplsInboundIfIndex,
cpwVcMplsInboundRowStatus,
cpwVcMplsInboundStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for inbound association of
VC and MPLS tunnel. This group is mandatory if strict
mode is implemented."
::= { cpwVcMplsGroups 3 }
cpwVcMplsMappingGroup OBJECT-GROUP
OBJECTS {
cpwVcMplsNonTeMappingVcIndex,
cpwVcMplsTeMappingVcIndex
}
STATUS current
DESCRIPTION
"Collection of objects used for mapping of tunnels and VC
labels to VC index."
::= { cpwVcMplsGroups 4 }
END
Reference in New Issue Copy Permalink