david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-IGMP-SNOOPING-MIB

3949 lines
134 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- ***************************************************************
-- CISCO-IGMP-SNOOPING-MIB: MIB for IGMP Snooping Configuration.
--
-- May 2002, Binh P Le
--
-- Copyright (c) 2002, 2007-2010 by Cisco Systems Inc.
--
-- All rights reserved.
-- ***************************************************************
CISCO-IGMP-SNOOPING-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
MODULE-IDENTITY,
Counter32,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue,
TimeStamp,
TEXTUAL-CONVENTION,
StorageType,
RowStatus
FROM SNMPv2-TC
ifIndex,
InterfaceIndex
FROM IF-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
VlanIndex
FROM CISCO-VTP-MIB
CiscoPortList,
CiscoPortListRange
FROM CISCO-TC
Percent
FROM CISCO-QOS-PIB-MIB
VlanIndexOrZero
FROM CISCO-PRIVATE-VLAN-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoIgmpSnoopingMIB MODULE-IDENTITY
LAST-UPDATED "201006080000Z"
ORGANIZATION "Cisco System, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-lan-switch-snmp@cisco.com,
cs-ipmulticast@cisco.com"
DESCRIPTION
"The MIB module for IGMP Snooping feature.
Internet Group Management Protocol (IGMP) is the protocol used
by IPv4 end hosts to indicate their interest in receiving
multicast traffic for certain multicast groups to neighboring
multicast routers. Version 3 of IGMP adds support for source
based filtering; which means the end hosts can specifically
indicate to receive or not-receive multicast packets from
specific source addresses. This information is used by the
multicast routers to restrict forwarding of multicast traffic
for the host.
IGMP Snooping is a switch protocol. A switch that implements
IGMP Snooping listens to the IGMP messages exchanged between
the hosts and router, then provides selective transmission of
multicast traffic based on multicast mac destination address
or multicast group address. With IGMPv3 support,
IGMP Snooping can potentially provide selective transmission
of multicast data based on (source address, group address)
onto the ports that are interested. In addition to this,
IGMP Snooping can also provide proxy reporting, report
suppression and fast leave capabilities."
REVISION "201006080000Z"
DESCRIPTION
"Added support for the following:
- cisLeaveQueryConfigGroup
- cisQuerierGlobalConfigGroup
- cisIgmpQuerierConfigExtGroup
- cisRobustnessConfigGroup
- cisTimeToLiveConfigGroup
- cisRouterAlertConfigGroup
- cisVlanExplicitTrackingCfgGroup
- cisIfLimitGroup
- cisIfLimitTotalGroup
- cisIfAccessGroupGroup
- cisVlanFilterConfigGroup
- cisFilterStatisticsGroup
- cisMulticastGroupPortInfoGroup
- cisMulticastGroupConfigGroup
- cisQuerierGlobalTcnQueryCountGroup
- cisQuerierTcnQueryPendingGroup
Deprecated cisMcastRouterConfigGroup and replaced it with
cisMulticastRouterConfigGroup. Deprecated
cisMcastGroupInfoGroup and replaced it with
cisMulticastGroupInfoGroup.
Updated DESCRIPTION of cisL2EntryLimit, cisEntryTrackingLimit,
cisSourceOnlyPercentageScanLimit and cisSourceOnlyLearningLimit
to include the meaning of value zero.
Revised the DESCRIPTION of cisVlanConfigEntry and
cisIgmpQuerierEntry."
REVISION "200711080000Z"
DESCRIPTION
"Added value 'unknown(4)' to CisIgmpVersion.
Added support for the following:
- cisL2EntryLimitGroup
- cisTrackingLimitGroup
- cisSourceOnlyLimitGroup
- cisRateLimitGroup2
- cisVlanConfigGroup2
- cisSourceOnlyAgeTimerInSecGroup.
Deprecated cisRateLimitGroup,
cisGlobalSourceOnlyLearnGroup."
REVISION "200404020000Z"
DESCRIPTION
"Replaced the import of PortList from Q-BRIDGE-MIB with
CiscoPortList from CISCO-TC."
REVISION "200303240000Z"
DESCRIPTION
"Add support for the following:
- per VLAN IGMP Snooping configuration and group
membership information
- per port IGMP Snooping configuration
- per VLAN IGMP Querier configuration
- global rate-limit control objects
- extend the cisSystemInfo to include more IGMP Snooping
configuration related objects."
REVISION "200205050000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 263 }
-- Textual Conventions
CisIgmpMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a working mode of IGMP protocol in a
device.
auto(1) : The system decides the working mode by itself.
igmpOnly(2): Working on IGMP mode only.
igmpCgmp(3): Working on both IGMP and CGMP modes."
SYNTAX INTEGER {
auto(1),
igmpOnly(2),
igmpCgmp(3)
}
CisIgmpVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the version of IGMP:
version1(1) : Version 1 of IGMP
version2(2) : Version 2 of IGMP
version3(3) : Version 3 of IGMP
unknown(4) : Version of IGMP is not determined."
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3),
unknown(4)
}
ciscoIgmpSnoopingNotification OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIB 0 }
ciscoIgmpSnoopingMIBObject OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIB 1 }
cisSystemInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 1 }
cisStatisticsInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 2 }
cisRateLimitInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 3 }
cisVlanConfigInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 4 }
cisIfConfigInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 5 }
cisMulticastRouterInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 6 }
cisMulticastGroupInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 7 }
cisResourceLimitInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 8 }
cisQuerierConfigInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 9 }
cisFilteringInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 10 }
cisExplicitTrackingInfo OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIBObject 11 }
-- ------------------------------------------------------------
-- - The cisSystemInfo group.
-- ------------------------------------------------------------
cisIgmpSnoopingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether IGMP Snooping has been
enabled for the system."
::= { cisSystemInfo 1 }
cisV3ProcessEnabledAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the administrative status of IGMP v3
processing in the system. With the condition that IGMP
protocol has been enabled, a system will process IGMPv3
messages if this object is set to 'true', or it will process
only IGMPv1/v2 messages if this object is set to 'false'."
::= { cisSystemInfo 2 }
cisV3ProcessEnabledOperStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current operational status of IGMP
v3 processing in the system. This object is enabled if the
system is operating with IGMPv3 protocol. Value of this object
will be set to 'true' if the system is operating in IGMP v3,
and 'false' if it is operating in IGMPv1/v2."
::= { cisSystemInfo 3 }
cisFastLeaveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether Fast-Leave mechanism has been
configured to be enabled in the system. If Fast-Leave is
enabled in the switch, IGMP Snooping will prune the port on
which an IGMP leave message has been received without waiting
for the Group Specific Query to timeout to determine whether
there are any more hosts on that port for that group. If
the value of cisV3ProcessEnabledOperStatus is 'false',
this object will not have any effect."
::= { cisSystemInfo 4 }
cisFastBlockEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates whether Fast-Block mechanism has been
enabled for the system. This object only has effect if the
value of cisV3ProcessEnabledOperStatus is 'true'."
::= { cisSystemInfo 5 }
cisAdminMode OBJECT-TYPE
SYNTAX CisIgmpMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the administrative snooping mode of IGMP
Snooping feature, depends on whether only IGMP devices, or
also CGMP devices are existing in the network."
::= { cisSystemInfo 6 }
cisOperMode OBJECT-TYPE
SYNTAX CisIgmpMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the operational snooping mode of the
device. The object should return igmpOnly(2) or igmpCgmp(3)
only. Value of this object is meaningful only if the value
of cisIgmpSnoopingEnabled is 'true'."
::= { cisSystemInfo 7 }
cisLeaveQueryType OBJECT-TYPE
SYNTAX INTEGER {
generalQuery(1),
macGenQuery(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the type of IGMP-leave query that the
device will send on the interface the IGMP-leave message was
received.
generalQuery(1) : A General Query will be sent to all hosts
connecting to that interface.
macGenQuery(2) : A MAC-Based General Query will be sent to all
hosts in multicast groups that are associated
with the MAC-level address. MAC-Based General
Query is not a standard, it is a part of CGMP
(Cisco Group Management Protocol).
auto(3) : A Group-Specific query will be sent if there
are no IGMPv1 hosts detected in the network.
Otherwise a MAC-Based General Query will be
sent."
::= { cisSystemInfo 8 }
cisAddressAliasingMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
fallback(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the current IGMP Address Aliasing Mode of
the device.
normal(1) : IGMP is working in normal mode without detecting
address aliasing.
fallback(2): address aliasing is detected. The device stops
listening to the multicast control traffic and stays
in the fallback mode for an expiry time before
getting back to the normal mode."
::= { cisSystemInfo 9 }
cisFallbackTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the time the IGMP address aliasing mode
is fallback(2)."
::= { cisSystemInfo 10 }
cisReportSuppressionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'true', IGMP Snooping will
suppress duplicate IGMP Reports. When this object is set
to 'false', all IGMP Reports are forwarded to all multicast
routers in the VLAN."
::= { cisSystemInfo 11 }
cisTopoChangeFloodQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the flooding period for multicast
traffic upon receiving Topology Change Notifications (TCN).
IGMP Snooping will flood multicast traffic until
cisTopoChangeFloodQueryCount number of IGMP General Queries
are received by IGMP Snooping."
::= { cisSystemInfo 12 }
cisTopoChangeQuerySolicitEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the device running IGMP
Snooping will solicit IGMP General Queries from the
Querier upon receiving a Topology Change Notification (TCN).
The root device will always solicit IGMP General Queries
on TCN irrespective of the value of
cisTopoChangeQuerySolicitEnabled."
::= { cisSystemInfo 13 }
cisSourceOnlyLearningEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Source Only multicast entries
are learned by IGMP Snooping or not."
::= { cisSystemInfo 14 }
cisSourceOnlyEntryAgeTime OBJECT-TYPE
SYNTAX Integer32 (0..2880)
UNITS "minutes"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the aging time for Source Only
multicast entries when cisSourceOnlyLearningEnabled is
set to 'true'. When cisSourceOnlyEntryAgeTime is set to
0, aging is disabled. This object is deprecated and
replaced by 'cisSourceOnlyEntryAgingTime'."
::= { cisSystemInfo 15 }
cisV3SnoopingSupport OBJECT-TYPE
SYNTAX INTEGER {
basic(1),
full(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates IGMP Snooping support for
IGMPv3 as described below:
basic(1): Basic support for IGMPv3. IGMPv3 packets are
processed similar to IGMPv2 packets. In other words
Source list information is not used. Although this
does not break multicast traffic to IGMPv3 hosts,
it does not provide any other benefits such as Fast
Leave for IGMPv3 hosts, Explicit Host Tracking and
Source based filtering.
full(2): Full support for IGMPv3. Provides full IGMPv3
Snooping support. This includes processing of
IGMPv3 source list information along with group
information. Provides support for features such
as Fast Leave, Explicit Host Tracking and Proxy
Reporting and a potential to do Source based
filtering.
The value of this object is valid only when
cisV3ProcessEnabledAdminStatus is set to 'true'."
::= { cisSystemInfo 16 }
cisSourceOnlyEntryAgingTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the aging time in seconds for Source
Only multicast entries when cisSourceOnlyLearningEnabled is
set to 'true'. When cisSourceOnlyEntryAgingTime is set to
0, aging is disabled."
::= { cisSystemInfo 17 }
cisRobustnessVariable OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Robustness Variable of this device. This
value will be used at each VLAN if the corresponding
instance of cisVlanRobustnessVariable is not configured."
REFERENCE "RFC 3376, 8.1"
::= { cisSystemInfo 18 }
cisLastMemberQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IGMP Last Member Query Interval of this device.
This value will be used at each VLAN if the corresponding
instance of cisVlanLeaveQueryInterval is not configured."
REFERENCE "RFC 3376, 8.8"
::= { cisSystemInfo 19 }
cisLastMemberQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Last Member Query Count value of this
device. This value will be used at each VLAN if the
corresponding instance of cisVlanLastMemberQueryCount is
not configured."
::= { cisSystemInfo 20 }
cisTimeToLiveCheckEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether Time-To-Live (TTL) check is enabled when
processing IGMP packets in the system.
Setting this object to 'false' disables TTL check when
processing IGMP packets in the system.
Setting this object to 'true' enables TTL check, whether TTL
check for IGMP packets on each VLAN is done or not is
controlled by the corresponding instance of
cisVlanTimeToLiveCheckEnabled."
::= { cisSystemInfo 21 }
cisRouterAlertCheckEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether checking of Router-Alert option is enabled
for IGMP traffic in the system.
Setting this object to 'false' disables Router-Alert check in
the system.
Setting this object to 'true' enables Router-Alert check,
whether Router-Alert check is performed at each VLAN is
controlled by the corresponding instance of
cisVlanRouterAlertCheckEnabled."
::= { cisSystemInfo 22 }
-- ----------------------------------------
-- - The cisStatisticsInfo group.
-- ----------------------------------------
cisInterfaceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisInterfaceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table contains statistics information for IGMP Snooping. An
entry appears in this table for each IGMP Snooping capable
interface in the device."
::= { cisStatisticsInfo 1 }
cisInterfaceStatsEntry OBJECT-TYPE
SYNTAX CisInterfaceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains statistics information for a specific IGMP
Snooping capable interface. It provides information about
IGMP messages and reports that have been transmitted and
received at the interface."
INDEX { ifIndex }
::= { cisInterfaceStatsTable 1 }
CisInterfaceStatsEntry ::= SEQUENCE {
cisTxGeneralQueries Counter32,
cisTxGroupSpecificQueries Counter32,
cisTxReports Counter32,
cisTxLeaves Counter32,
cisRxGeneralQueries Counter32,
cisRxGroupSpecificQueries Counter32,
cisRxReports Counter32,
cisRxLeaves Counter32,
cisRxValidPackets Counter32,
cisRxInvalidPackets Counter32,
cisRxOtherPackets Counter32,
cisRxMACGeneralQueries Counter32,
cisRxTopoNotifications Counter32,
cisV3Allows Counter32,
cisV3Blocks Counter32,
cisV3IsIncluded Counter32,
cisV3IsExcluded Counter32,
cisV3ToIncluded Counter32,
cisV3ToExcluded Counter32
}
cisTxGeneralQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP General Queries that have been transmitted through
an interface."
::= { cisInterfaceStatsEntry 1 }
cisTxGroupSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP Group-Specific Queries that have been transmitted
through an interface."
::= { cisInterfaceStatsEntry 2 }
cisTxReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP Membership Reports that have been transmitted
through an interface."
::= { cisInterfaceStatsEntry 3 }
cisTxLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP Leave messages that have been transmitted through
an interface."
::= { cisInterfaceStatsEntry 4 }
cisRxGeneralQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP General Queries that have been received at an
interface."
::= { cisInterfaceStatsEntry 5 }
cisRxGroupSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP Group-Specific Queries that have been received at
an interface."
::= { cisInterfaceStatsEntry 6 }
cisRxReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP Membership Reports that have been received at an
interface."
::= { cisInterfaceStatsEntry 7 }
cisRxLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total IGMP Leave messages that have been received at an
interface."
::= { cisInterfaceStatsEntry 8 }
cisRxValidPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total valid IGMP packets have been received at an interface."
::= { cisInterfaceStatsEntry 9 }
cisRxInvalidPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total packets those are not valid IGMP messages received
at an interface."
::= { cisInterfaceStatsEntry 10 }
cisRxOtherPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total non IGMP messages messages that have been received
at an interface, comprising cgmp join, pim hello, dvmrp
and mospf messages."
::= { cisInterfaceStatsEntry 11 }
cisRxMACGeneralQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total MAC-based General Queries that have been received at
an interface."
::= { cisInterfaceStatsEntry 12 }
cisRxTopoNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Topology Change Notifications that have been received
at an interface."
::= { cisInterfaceStatsEntry 13 }
cisV3Allows OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Source-List-Change records with the record type
ALLOW_NEW_SOURCES that have been sent from hosts connected
to an interface. This record type indicates that the Source
Address fields in this Group Record contain a list of
additional sources that the system wishes to hear from, for
packets sent to the specified multicast address."
::= { cisInterfaceStatsEntry 14 }
cisV3Blocks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Source-List-Change records with the record type
BLOCK_OLD_SOURCE that have been sent from hosts connected to
an interface. This record type indicates that the Source
Address fields in this Group Record contain a list of the
sources that the system no longer wishes to hear from, for
packets sent to the specified multicast address."
::= { cisInterfaceStatsEntry 15 }
cisV3IsIncluded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Current-State records with the state MODE_IS_INCLUDE
that have been sent from hosts in response to a Query received
at an interface. This state indicates that the interface has a
filter mode of INCLUDE for the specified multicast address."
::= { cisInterfaceStatsEntry 16 }
cisV3IsExcluded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Current-State records with the state MODE_IS_EXCLUDE
that have been sent from hosts in response to a Query received
at an interfaces. This state indicates that the interface has a
filter mode of EXCLUDE for the specified multicast address."
::= { cisInterfaceStatsEntry 17 }
cisV3ToIncluded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Filter-Mode-Change records with the record type
CHANGE_TO_INCLUDE_MODE that have been sent through an
interface. This type of record indicates that the filter mode
has been changed to INCLUDE mode for the specified multicast
address, and the Source Address fields in this Group Record
will contain the new source list for the specified multicast
address, if it is not empty."
::= { cisInterfaceStatsEntry 18 }
cisV3ToExcluded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Filter-Mode-Change records with the record type
CHANGE_TO_EXCLUDE_MODE that have been sent through an
interface. This type of record indicates that the filter mode
has been changed to EXCLUDE mode for the specified multicast
address, and the Source Address fields in this Group Record
will contain the new source list for the specified multicast
address, if it is not empty."
::= { cisInterfaceStatsEntry 19 }
-- ----------------------------------------
-- The cisRateLimitInfo group.
-- ----------------------------------------
cisGeneralQueryRateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per 30 seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Rate limit for General-Query packets per 30 seconds from
a control plane address. If the packets exceed the rate,
snooping will be stalled for a period of 30 seconds."
::= { cisRateLimitInfo 1 }
cisDvmrpRateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per 30 seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Rate limit for DVMRP packets per 30 seconds from
a control plane address. If the packets exceed the rate,
snooping will be stalled for a period of 30 second."
::= { cisRateLimitInfo 2 }
cisMospf1RateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per 30 seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Rate limit for MOSPF1 packets per 30 seconds from
a control plane address. If the packets exceed the rate,
snooping will be stalled for a period of 30 second."
::= { cisRateLimitInfo 3 }
cisMospf2RateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per 30 seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Rate limit for MOSPF2 packets per 30 seconds from
a control plane address. If the packets exceed the rate,
snooping will be stalled for a period of 30 second."
::= { cisRateLimitInfo 4 }
cisPimV2RateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per 30 seconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Rate limit for PIMv2 packets per 30 seconds from
a control plane address. If the packets exceed the rate,
snooping will be stalled for a period of 30 second."
::= { cisRateLimitInfo 5 }
cisRateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate limit for incoming IGMP messages in packets per seconds,
applied to each VLAN in the system. IGMP Snooping will be
disabled on the corresponding VLAN if IGMP message incoming
rate exceeds the limit, then enabled back automatically once
IGMP join message rate is below the limit indicated by the
corresponding instance value of this object. Setting value
zero to this object means no limitation on IGMP incoming
message rate."
::= { cisRateLimitInfo 6 }
-- ----------------------------------------
-- - The cisVlanConfigInfo group.
-- ----------------------------------------
cisVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table contains VLAN based configuration information
for IGMP Snooping."
::= { cisVlanConfigInfo 1 }
cisVlanConfigEntry OBJECT-TYPE
SYNTAX CisVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created for each IGMP Snooping capable VLAN
found in the device. An entry is removed if such VLAN
becomes IGMP Snooping incapable or has been removed."
INDEX { cisVlanIndex }
::= { cisVlanConfigTable 1 }
CisVlanConfigEntry ::= SEQUENCE {
cisVlanIndex VlanIndex,
cisVlanIgmpSnoopingEnabled TruthValue,
cisVlanFastLeaveEnabled TruthValue,
cisVlanIgmpSnoopingOperMode CisIgmpMode,
cisVlanIgmpSnoopingLearningMode INTEGER,
cisVlanReportSuppressionEnabled TruthValue,
cisVlanLeaveQueryInterval Unsigned32,
cisVlanLastMemberQueryCount Unsigned32,
cisVlanRobustnessVariable Unsigned32,
cisVlanTimeToLiveCheckEnabled TruthValue,
cisVlanRouterAlertCheckEnabled TruthValue
}
cisVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VLAN in which IGMP Snooping
is configured."
::= { cisVlanConfigEntry 1 }
cisVlanIgmpSnoopingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'true' IGMP Snooping
is enabled on this VLAN else disabled."
::= { cisVlanConfigEntry 2 }
cisVlanFastLeaveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Fast-Leave mechanism
(also known as Immediate-Leave) is to be performed by IGMP
Snooping or not. When enabled, IGMP Snooping will remove
the interface from the group mentioned in the IGMP Leave
message received on that interface without waiting for the
IGMP Group-Specific Query to timeout to determine whether
there are any more hosts on that interface for that group."
::= { cisVlanConfigEntry 3 }
cisVlanIgmpSnoopingOperMode OBJECT-TYPE
SYNTAX CisIgmpMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the operational mode of IGMP Snooping.
The object should return igmpOnly(2) or igmpCgmp(3) only."
::= { cisVlanConfigEntry 4 }
cisVlanIgmpSnoopingLearningMode OBJECT-TYPE
SYNTAX INTEGER {
pimDvmrp(1),
cgmp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the multicast router port learning
method for IGMP Snooping as described below:
pimDvmrp(1) : Protocol Independent Multicast / Distance Vector
Multicast Routing Protocol.
cgmp(2) : Cisco Group Management Protocol."
::= { cisVlanConfigEntry 5 }
cisVlanReportSuppressionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Report Suppression is enabled
for this VLAN."
::= { cisVlanConfigEntry 6 }
cisVlanLeaveQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IGMP Last Member Query Interval of this VLAN.
Value of zero for this object indicates that IGMP leave timer
is not configured for this VLAN. In that case, IGMP leave
timer used in this VLAN is indicated by the value of
cisLastMemberQueryInterval."
::= { cisVlanConfigEntry 7 }
cisVlanLastMemberQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Last Member Query Count for this
VLAN.
Value of zero for this object indicates that Last Member
Query Count is not configured for the VLAN. In that case,
Last Member Query Count used in this VLAN is indicated by the
value of cisLastMemberQueryCount."
::= { cisVlanConfigEntry 8 }
cisVlanRobustnessVariable OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects specifies the Robustness Variable for this VLAN.
Value of zero for this object indicates that Robustness
Variable is not configured for the VLAN. In that case,
Robustness Variable used in this VLAN is indicated by the
value of cisRobustnessVariable."
REFERENCE "RFC 3376, 8.1"
::= { cisVlanConfigEntry 9 }
cisVlanTimeToLiveCheckEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects specifies whether TTL check is enabled on this
VLAN.
Setting this object will only take effect when
cisTimeToLiveCheckEnabled is 'true'."
::= { cisVlanConfigEntry 10 }
cisVlanRouterAlertCheckEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects specifies whether checking of Router-Alert option
is enabled for IGMP traffic in this VLAN.
Setting this object will only take effect when
cisRouterAlertCheckEnabled is 'true'."
::= { cisVlanConfigEntry 11 }
cisIgmpQuerierTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisIgmpQuerierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing information regarding the IGMP Querier in
the VLAN. The device can be configured to be the IGMP Querier
for the VLAN. An IGMP Querier for the VLAN is selected by
using a Querier Election process."
::= { cisVlanConfigInfo 2 }
cisIgmpQuerierEntry OBJECT-TYPE
SYNTAX CisIgmpQuerierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created for each IGMP Snooping capable VLAN
found in the device. An entry is removed if such VLAN
becomes IGMP Snooping incapable or has been removed."
INDEX { cisIgmpQuerierVlanIndex }
::= { cisIgmpQuerierTable 1 }
CisIgmpQuerierEntry ::= SEQUENCE {
cisIgmpQuerierVlanIndex VlanIndex,
cisIgmpQuerierEnabled TruthValue,
cisIgmpQuerierState INTEGER,
cisIgmpQuerierVersion CisIgmpVersion,
cisIgmpQuerierAddressType InetAddressType,
cisIgmpQuerierAddress InetAddress,
cisIgmpQuerierInterface InterfaceIndex,
cisIgmpQuerierTcnQueryCount Unsigned32,
cisIgmpQuerierTcnQueryInterval Unsigned32,
cisIgmpQuerierTimerExpiry Unsigned32,
cisIgmpQuerierMaxResponseTime Unsigned32,
cisIgmpQuerierQueryInterval Unsigned32,
cisIgmpQuerierAdminAddressType InetAddressType,
cisIgmpQuerierAdminAddress InetAddress,
cisIgmpQuerierAdminVersion CisIgmpVersion,
cisIgmpQuerierTcnQueryPending Counter32
}
cisIgmpQuerierVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object indicates the VLAN that the Querier will send
IGMP queries on."
::= { cisIgmpQuerierEntry 1 }
cisIgmpQuerierEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether IGMP Snooping Querier function
is enabled on the VLAN. Setting this object to 'enable' will
enable IGMP Snooping Querier function on this VLAN; Setting
this object to 'false' will disable IGMP Snooping Querier
function on this VLAN. Setting this object will only take effect
when cisQuerierEnabled is 'true'.
If IGMP Snooping Querier election is enabled in the system, this
object also controls whether the device will participate in
the IGMP Querier election in a VLAN. If the object is set
to 'true', the device will participate to an election
process to be a Querier. If the object is set to 'false'
while the device is acting as the Querier in a VLAN, a new
election will be activated to choose a different Querier."
::= { cisIgmpQuerierEntry 2 }
cisIgmpQuerierState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
electing(2),
querier(3),
nonQuerier(4),
inactive(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the current state of the device as an
IGMP Querier in a VLAN.
disabled(1) : Querier function is disabled for this device
in this VLAN.
electing(2) : The device is in the election process of the
Querier.
querier(3) : The device is the current Querier in this
VLAN.
nonQuerier(4): The device has lost the election process of
the Querier.
inactive(5) : VLAN is inactive or not an Ethernet VLAN."
::= { cisIgmpQuerierEntry 3 }
cisIgmpQuerierVersion OBJECT-TYPE
SYNTAX CisIgmpVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the operational IGMP version of the
Querier for the VLAN. IGMP version of the Querier is
determined by the type of IGMP General Query received by
the device."
REFERENCE "RFC 3376"
::= { cisIgmpQuerierEntry 4 }
cisIgmpQuerierAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates IP address type of the IGMP Querier
for the VLAN."
::= { cisIgmpQuerierEntry 5 }
cisIgmpQuerierAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the operational IP address of the IGMP
Querier for the VLAN."
::= { cisIgmpQuerierEntry 6 }
cisIgmpQuerierInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the interface on which IGMP Querier is
detected for the VLAN. The value of this object is zero
if the device itself is acting as IGMP Querier for the VLAN."
::= { cisIgmpQuerierEntry 7 }
cisIgmpQuerierTcnQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of TCN queries to be executed upon
receiving TCN on this VLAN.
Value of zero for this object indicates that querier TCN query
count is not configured for the VLAN."
::= { cisIgmpQuerierEntry 8 }
cisIgmpQuerierTcnQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the TCN query interval time for this VLAN.
Value of zero for this object indicates that querier
TCN query interval is not configured for the VLAN. In that
case, querier TCN query interval used in this VLAN is
indicated by the value of cisQuerierTcnQueryInterval."
::= { cisIgmpQuerierEntry 9 }
cisIgmpQuerierTimerExpiry OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the querier expiration timer on this VLAN.
Value of zero for this object indicates that querier
expiration timer is not configured for the VLAN. In that
case, querier expiration timer used in this VLAN is
indicated by the value of cisQuerierTimerExpiry."
::= { cisIgmpQuerierEntry 10 }
cisIgmpQuerierMaxResponseTime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Max Response Time value of queries generated
by IGMP Snooping Querier on this VLAN.
Value of zero for this object indicates that querier Max
Response Time is not configured for the VLAN. In that case,
querier Max Response Time used in this VLAN is indicated
by the value of cisQuerierMaxResponseTime."
::= { cisIgmpQuerierEntry 11 }
cisIgmpQuerierQueryInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4294967295)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval between IGMP Queries to this VLAN.
Value of zero for this object indicates that querier
query interval is not configured for the VLAN. In that case,
querier query interval used in this VLAN is indicated by
the value of cisQuerierQueryInterval."
::= { cisIgmpQuerierEntry 12 }
cisIgmpQuerierAdminAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the administrative IP address type of the IGMP
Querier of this VLAN."
::= { cisIgmpQuerierEntry 13 }
cisIgmpQuerierAdminAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the administrative Internet address of the
IGMP Querier of this VLAN, when IGMP Snooping Querier
function is enabled on this VLAN. The type of this
address is determined by the value of
cisIgmpQuerierAdminAddressType."
::= { cisIgmpQuerierEntry 14 }
cisIgmpQuerierAdminVersion OBJECT-TYPE
SYNTAX CisIgmpVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the administrative version of the IGMP version
that the Querier feature uses on this VLAN.
Value 'unknown' indicates that the administrative version is
not configured for IGMP Querier on this VLAN."
::= { cisIgmpQuerierEntry 15 }
cisIgmpQuerierTcnQueryPending OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining TCN queries in respond to TCN on this
VLAN."
::= { cisIgmpQuerierEntry 16 }
-- ----------------------------------------
-- - The cisIfConfigInfo group.
-- ----------------------------------------
cisIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing configuration information for IGMP
Snooping on capable Layer two interfaces."
::= { cisIfConfigInfo 1 }
cisIfConfigEntry OBJECT-TYPE
SYNTAX CisIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created for each Layer two interface
capable of being flood with multicast traffic by IGMP
Snooping."
INDEX { ifIndex }
::= { cisIfConfigTable 1 }
CisIfConfigEntry ::= SEQUENCE {
cisIfTopoChangeFloodEnabled TruthValue
}
cisIfTopoChangeFloodEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is set to 'true' multicast traffic will be
flooded on the port for cisTopoChangeFloodQueryCount of Igmp
General Queries upon receiving a Topology Change
Notification (TCN) for the VLAN to which the port belongs."
::= { cisIfConfigEntry 1 }
-- ------------------------------------------------------
-- The cisMulticastRouterInfo group.
-- ------------------------------------------------------
cisMcastRouterCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisMcastRouterCfgEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table containing multicast router configuration information
for IGMP Snooping. This table is deprecated and replaced by
cisMcastRouterConfigTable."
::= { cisMulticastRouterInfo 1 }
cisMcastRouterCfgEntry OBJECT-TYPE
SYNTAX CisMcastRouterCfgEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry is created for each interface in the VLAN that is
either learned or configured as multicast router port.
A multicast router port is learned using the method
specified by cisVlanIgmpSnoopingLearningMode."
INDEX {
ifIndex,
cisMcastRouterVlanIndex
}
::= { cisMcastRouterCfgTable 1 }
CisMcastRouterCfgEntry ::= SEQUENCE {
cisMcastRouterVlanIndex VlanIndex,
cisMcastRouterType INTEGER,
cisMcastRouterRowStatus RowStatus
}
cisMcastRouterVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object indicates the VLAN to which the multicast router
port belongs."
::= { cisMcastRouterCfgEntry 1 }
cisMcastRouterType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates if the multicast router port is
a configured (static) or learned (dynamic) port."
::= { cisMcastRouterCfgEntry 2 }
cisMcastRouterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This object is a conceptual row entry that allows to add
or delete entries to or from the cisMcastRouterCfgTable.
When creating an entry in this table 'createAndGo' method
is used and the value of this object is set to 'active'.
Deactivation of an 'active' entry is not allowed. When
deleting an entry in this table 'destroy' method is
used."
::= { cisMcastRouterCfgEntry 3 }
cisMcastRouterConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisMcastRouterConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of multicast router used by IGMP
snooping. An entry is created for every multicast router
learnt by the system. An entry can also be created
manually by user. Only entries which are manually created
can be deleted from the table."
::= { cisMulticastRouterInfo 2 }
cisMcastRouterConfigEntry OBJECT-TYPE
SYNTAX CisMcastRouterConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of configuration and information regarding a single
multicast router."
INDEX {
cisMcastRouterConfigVlanIndex,
ifIndex
}
::= { cisMcastRouterConfigTable 1 }
CisMcastRouterConfigEntry ::= SEQUENCE {
cisMcastRouterConfigVlanIndex VlanIndex,
cisMcastRouterConfigRouterType INTEGER,
cisMcastRouterConfigStorageType StorageType,
cisMcastRouterConfigRowStatus RowStatus
}
cisMcastRouterConfigVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VLAN to which the multicast router
port belongs."
::= { cisMcastRouterConfigEntry 1 }
cisMcastRouterConfigRouterType OBJECT-TYPE
SYNTAX INTEGER {
static(1),
dynamic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates type of the multicast router.
static: the multicast router is configured manually.
dynamic: the multicast router is learned by the system."
::= { cisMcastRouterConfigEntry 2 }
cisMcastRouterConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type of this conceptual
row."
DEFVAL { volatile }
::= { cisMcastRouterConfigEntry 3 }
cisMcastRouterConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation, deletion and
modification of rows in this table.
Once a row becomes active, value in any column within
such row can not be modified."
::= { cisMcastRouterConfigEntry 4 }
-- ----------------------------------------
-- The cisMulticastGroupInfo group.
-- ----------------------------------------
cisMcastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisMcastGroupEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table containing multicast group address information for
IGMP Snooping."
::= { cisMulticastGroupInfo 1 }
cisMcastGroupEntry OBJECT-TYPE
SYNTAX CisMcastGroupEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry is created by IGMP Snooping for each group learned
in the VLAN."
INDEX {
cisMcastGroupVlanIndex,
cisMcastGroupAddressType,
cisMcastGroupAddress
}
::= { cisMcastGroupTable 1 }
CisMcastGroupEntry ::= SEQUENCE {
cisMcastGroupVlanIndex VlanIndex,
cisMcastGroupAddressType InetAddressType,
cisMcastGroupAddress InetAddress,
cisMcastGroupFilterMode INTEGER,
cisMcastGroupIgmpVersion CisIgmpVersion,
cisMcastGroupIncludeHostCount Counter32,
cisMcastGroupExcludeHostCount Counter32,
cisMcastGroupPortList CiscoPortList
}
cisMcastGroupVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object indicates the VLAN in which the group is learned."
::= { cisMcastGroupEntry 1 }
cisMcastGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object indicates IP multicast address type learned
by IGMP Snooping."
::= { cisMcastGroupEntry 2 }
cisMcastGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This object indicates IP multicast address learned by
IGMP Snooping."
::= { cisMcastGroupEntry 3 }
cisMcastGroupFilterMode OBJECT-TYPE
SYNTAX INTEGER {
include(1),
exclude(2)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the IGMP filter mode for this group.
include(1) : reception of multicast packets sent to the group
specified by cisMcastGroupAddress is requested
only from the specified IPv4 source addresses
listed in the IGMPv3 Membership Reports.
exclude(2) : reception of multicast packets sent to the group
specified by cisMcastGroupAddress is requested
from all except from the list of IPv4 source
addresses specified in the IGMPv3 Membership
Reports.
The filter mode is determined by the type of Group Record
received in the IGMP Membership Report received by the
device. Groups for which IGMPv1/v2 Membership Reports
are received are considered to have a cisMcastGroupFilterMode
of 'exclude'."
REFERENCE "RFC 3376"
::= { cisMcastGroupEntry 4 }
cisMcastGroupIgmpVersion OBJECT-TYPE
SYNTAX CisIgmpVersion
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the IGMP version for the group.
This is determined by the type of IGMP Membership Report
received by the device."
::= { cisMcastGroupEntry 5 }
cisMcastGroupIncludeHostCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of hosts that
are in INCLUDE mode for the group."
::= { cisMcastGroupEntry 6 }
cisMcastGroupExcludeHostCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the number of hosts that
are in EXCLUDE mode for the group."
::= { cisMcastGroupEntry 7 }
cisMcastGroupPortList OBJECT-TYPE
SYNTAX CiscoPortList
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the set of ports on which IGMP
Membership Reports are received for the group indicating
interest to receive traffic sent to the group."
::= { cisMcastGroupEntry 8 }
cisMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of multicast group information for
IGMP Snooping."
::= { cisMulticastGroupInfo 2 }
cisMulticastGroupEntry OBJECT-TYPE
SYNTAX CisMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of multicast group in the system. An entry is created
for each group learned or configured in the system."
INDEX {
cisMulticastGroupVlanIndex,
cisMulticastGroupCeVlanIndex,
cisMulticastGroupAddressType,
cisMulticastGroupAddress,
cisMulticastGroupSourceAddress
}
::= { cisMulticastGroupTable 1 }
CisMulticastGroupEntry ::= SEQUENCE {
cisMulticastGroupVlanIndex VlanIndex,
cisMulticastGroupCeVlanIndex VlanIndex,
cisMulticastGroupAddressType InetAddressType,
cisMulticastGroupAddress InetAddress,
cisMulticastGroupSourceAddress InetAddress,
cisMulticastGroupGroupType INTEGER,
cisMulticastGroupIgmpVersion BITS,
cisMulticastGroupSourceUpTime Unsigned32,
cisMulticastGroupSourceExpires Unsigned32,
cisMulticastGroupInclHostCount Counter32,
cisMulticastGroupExclHostCount Counter32
}
cisMulticastGroupVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VLAN in which the group is
learned or configured."
::= { cisMulticastGroupEntry 1 }
cisMulticastGroupCeVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the Customer Equipment (CE) VLAN in
which the group is learned or configured."
::= { cisMulticastGroupEntry 2 }
cisMulticastGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of Internet address of
the multicast group and source in this entry."
::= { cisMulticastGroupEntry 3 }
cisMulticastGroupAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..48))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates IP multicast address of the group. Type
of this address is indicated by cisMulticastGroupAddressType."
::= { cisMulticastGroupEntry 4 }
cisMulticastGroupSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..48))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates IP address of the source of the multicast
traffic. Value of zero for this object indicates that the
multicast traffic of the group indicated by the corresponding
instance of cisMulticastGroupAddress can come from any source.
Type of this address is indicated by
cisMulticastGroupAddressType."
::= { cisMulticastGroupEntry 5 }
cisMulticastGroupGroupType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1),
static(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this multicast group is learned
or manually configured on the device.
dynamic(1): this multicast group is learned from multicast
traffic on this VLAN.
static(2) : this multicast group is manually configured on the
device.
The group type is set to 'static' unconditionally if a port is
joining that group via configuration."
::= { cisMulticastGroupEntry 6 }
cisMulticastGroupIgmpVersion OBJECT-TYPE
SYNTAX BITS {
igmpV1(0),
igmpV2(1),
igmpV3(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the versions of IGMP packets received
from this group."
::= { cisMulticastGroupEntry 7 }
cisMulticastGroupSourceUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time (in seconds) since this source
started sending multicast data for the multicast group."
::= { cisMulticastGroupEntry 8 }
cisMulticastGroupSourceExpires OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time (in seconds) the association of
this source and the multicast group will be expired, if there is
no host interests in receiving multicast data from it.
This object has the value zero when value of the corresponding
object cisMulticastGroupGroupType is 'static'."
::= { cisMulticastGroupEntry 9 }
cisMulticastGroupInclHostCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hosts that are in
INCLUDE mode for the group."
::= { cisMulticastGroupEntry 10 }
cisMulticastGroupExclHostCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of hosts that are in
EXCLUDE mode for the group."
::= { cisMulticastGroupEntry 11 }
cisMulticastGroupPortListTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisMulticastGroupPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of ports joining multicast groups."
::= { cisMulticastGroupInfo 3 }
cisMulticastGroupPortListEntry OBJECT-TYPE
SYNTAX CisMulticastGroupPortListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a list of ports joining a multicast group."
INDEX {
cisMulticastGroupVlanIndex,
cisMulticastGroupCeVlanIndex,
cisMulticastGroupAddressType,
cisMulticastGroupAddress,
cisMulticastGroupSourceAddress,
cisMulticastGroupPortRangeIndex
}
::= { cisMulticastGroupPortListTable 1 }
CisMulticastGroupPortListEntry ::= SEQUENCE {
cisMulticastGroupPortRangeIndex CiscoPortListRange,
cisMulticastGroupPortList CiscoPortList
}
cisMulticastGroupPortRangeIndex OBJECT-TYPE
SYNTAX CiscoPortListRange
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the bridge-port range of this row."
::= { cisMulticastGroupPortListEntry 1 }
cisMulticastGroupPortList OBJECT-TYPE
SYNTAX CiscoPortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports that joining a multicast group. It has
the information of up to 2k ports with the port number
starting from the information indicated in
cisMcastPortRangeIndex object of the same row. For example,
if the value of cisMcastPortRangeIndex is 'twoKto4K', the
port number indicated in this object starting from 2049
and ending to 4096.
A port number is the value of dot1dBasePort for the port in
the BRIDGE-MIB (RFC 4188)."
::= { cisMulticastGroupPortListEntry 2 }
cisMulticastGroupConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisMulticastGroupConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of configured multicast group and associated ports
in the system."
::= { cisMulticastGroupInfo 4 }
cisMulticastGroupConfigEntry OBJECT-TYPE
SYNTAX CisMulticastGroupConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of multicast group and its associated ports, which
is configured manually."
INDEX {
cisMulticastGroupConfVlanIndex,
cisMulticastGroupConfCeVlanIndex,
cisMulticastGroupConfAddressType,
cisMulticastGroupConfAddress,
cisMulticastGroupConfSourceAddress,
cisMulticastGroupConfPortRange
}
::= { cisMulticastGroupConfigTable 1 }
CisMulticastGroupConfigEntry ::= SEQUENCE {
cisMulticastGroupConfVlanIndex VlanIndex,
cisMulticastGroupConfCeVlanIndex VlanIndex,
cisMulticastGroupConfAddressType InetAddressType,
cisMulticastGroupConfAddress InetAddress,
cisMulticastGroupConfSourceAddress InetAddress,
cisMulticastGroupConfPortRange CiscoPortListRange,
cisMulticastGroupConfPortList CiscoPortList,
cisMulticastGroupConfStorageType StorageType,
cisMulticastGroupConfRowStatus RowStatus
}
cisMulticastGroupConfVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the VLAN in which the group is
configured."
::= { cisMulticastGroupConfigEntry 1 }
cisMulticastGroupConfCeVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the Customer Equipment (CE) VLAN in
which the group is configured."
::= { cisMulticastGroupConfigEntry 2 }
cisMulticastGroupConfAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the type of Internet address of
multicast group and source in this entry."
::= { cisMulticastGroupConfigEntry 3 }
cisMulticastGroupConfAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..48))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies IP address of the multicast group.
Type of this address is indicated by
cisMulticastGroupConfAddressType."
::= { cisMulticastGroupConfigEntry 4 }
cisMulticastGroupConfSourceAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..48))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the IP address of the source of the
multicast traffic for this group. Value of zero for this
object indicates that the multicast traffic of this group can
come from any source. Type of this address is indicated by
cisMulticastGroupConfAddressType."
::= { cisMulticastGroupConfigEntry 5 }
cisMulticastGroupConfPortRange OBJECT-TYPE
SYNTAX CiscoPortListRange
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the bridge-port range of this row.."
::= { cisMulticastGroupConfigEntry 6 }
cisMulticastGroupConfPortList OBJECT-TYPE
SYNTAX CiscoPortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports that are configured to join a multicast
group. It has the information of up to 2k ports with the
port number starting from the information indicated in
cisMcastPortRangeIndex object of the same row. For
example, if the value of cisMulticastGroupConfPortRange is
'twoKto4K', the port number indicated in this object starting
from 2049 and ending to 4096.
A port number is the value of dot1dBasePort for the port
in the BRIDGE-MIB (RFC 4188)."
::= { cisMulticastGroupConfigEntry 7 }
cisMulticastGroupConfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type of this conceptual
row."
DEFVAL { volatile }
::= { cisMulticastGroupConfigEntry 8 }
cisMulticastGroupConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation, deletion and
modification of rows in this table.
Once a row becomes active, value in any column within
such row can not be modified."
::= { cisMulticastGroupConfigEntry 9 }
-- -----------------------------------------
-- cisResourceLimitInfo groups
-- -----------------------------------------
cisL2EntryLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of Layer 2 multicast entries
that IGMP Snooping can install in the Layer 2 forwarding
table. For multicast groups not being installed in the
Layer 2 forwarding table due to exceeding the limitation,
their traffic will be flooded within the VLAN.
Value of zero for this object indicates that there is no
limitation on the number of Layer 2 multicast entries
which can be installed in the Layer 2 forwarding table."
::= { cisResourceLimitInfo 1 }
cisEntryTrackingLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of entries that can be installed
in the tracking database.
Value of zero for this object indicates that no entry can
be installed to the tracking database."
::= { cisResourceLimitInfo 2 }
cisSourceOnlyPercentageScanLimit OBJECT-TYPE
SYNTAX Percent
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the percentage of IGMP Snooping Source Only
entries to be processed in each Source Only timeout
period, in which they will be timed out in batches.
Entries not processed due to this limitation will
remain in the Layer 2 forwarding table.
Value of zero for this object indicates that Source Only
entries scan will not be performed."
::= { cisResourceLimitInfo 3 }
cisSourceOnlyLearningLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of Layer 2 multicast Source
Only entries that IGMP Snooping can install in the Layer 2
forwarding table. If the number of multicast Source Only
groups in the system exceeds this limit, snooping entries
will not be installed for the over-limit groups and Source
Only traffic for these groups will be flooded within the
VLAN.
Value of zero for this object indicates that there is no
limitation on the number of Source Only entries which can be
installed in the Layer 2 forwarding table."
::= { cisResourceLimitInfo 4 }
-- ----------------------------------------
-- cisQuerierConfigInfo
-- ----------------------------------------
cisQuerierEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if IGMP Snooping Querier function is globally
enabled at the device level.
Setting this object to 'false' disabled IGMP Snooping
Querier function globally, thus disabling the feature at
each VLAN.
Setting this object to 'true' enables IGMP Snooping Querier
in the system, whether the feature is running at each VLAN
or not is controlled by the corresponding entry in
cisIgmpQuerierTable."
::= { cisQuerierConfigInfo 1 }
cisQuerierTcnQueryInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the TCN query interval time when the device is
acting as the active querier. This value will be used at each
VLAN if value of the corresponding instance of
cisIgmpQuerierTcnQueryInterval is not configured."
::= { cisQuerierConfigInfo 2 }
cisQuerierTimerExpiry OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the querier expiration timer. This value will
be used at each VLAN if value of the corresponding
instance of cisIgmpQuerierTimerExpiry is not configured."
::= { cisQuerierConfigInfo 3 }
cisQuerierMaxResponseTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "one-tenth of second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Max Response Time value of queries generated
by IGMP Snooping Querier. This value will be used at each
VLAN if value of the corresponding instance of
cisIgmpQuerierMaxResponseTime is not configured."
REFERENCE "RFC 3376"
::= { cisQuerierConfigInfo 4 }
cisQuerierQueryInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval between IGMP queries. This value
will be used at each VLAN if value of the corresponding
instance of cisIgmpQuerierQueryInterval is not configured."
::= { cisQuerierConfigInfo 5 }
cisQuerierAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of Internet address of
the IGMP Querier associating with this device when it is
acting as an IGMP Snooping Querier."
::= { cisQuerierConfigInfo 6 }
cisQuerierAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Internet address of the IGMP Querier associating
with this device when it is acting as an IGMP Snooping Querier.
This address will be used by IGMP Snooping Querier feature at
each VLAN if no corresponding IGMP Snooping Querier is
configured for that VLAN. The type of this address is determined
by value of cisQuerierAddressType object."
::= { cisQuerierConfigInfo 7 }
cisQuerierVersion OBJECT-TYPE
SYNTAX CisIgmpVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the IGMP version that the Querier feature uses.
This value will be used at each VLAN if value of the
corresponding instance of cisIgmpQuerierAdminVersion is
'unknown'."
::= { cisQuerierConfigInfo 8 }
cisQuerierTcnQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of TCN queries to be executed upon
receiving TCN, when the device is acting as the active
querier. This value will be used at each VLAN if value of
the corresponding instance of cisVlanQuerierTcnQueryCount
is not configured."
::= { cisQuerierConfigInfo 9 }
-- -----------------------------------------------------------------
-- cisFilteringInfo
--
-- IGMP Snooping filters provides mechanisms to control the
-- propagation of IGMP traffic through the network. By managing IGMP
-- traffic, IGMP filtering provides the capability to manage IGMP
-- snooping, which in turn controls the forwarding of multicast
-- traffic.
--
-- When an IGMP packet is received, IGMP Snooping uses the configured
-- filters to determine whether the IGMP packet should be discarded or
-- allowed to be processed. With an IGMP version 1 or version 2 packet,
-- the entire packet is discarded. With a IGMPv3 packet, the packet is
-- rewritten to remove message elements that were denied by the
-- filters.
-- -----------------------------------------------------------------
cisIfLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisIfLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of IGMP Snooping limit filters."
::= { cisFilteringInfo 1 }
cisIfLimitEntry OBJECT-TYPE
SYNTAX CisIfLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing IGMP Snooping limit filters. A limit
filter can be applied on a Layer2 interface, and VLAN(s) carried
by the interface when it is in trunk mode."
INDEX {
ifIndex,
cisIfLimitVlanNumber
}
::= { cisIfLimitTable 1 }
CisIfLimitEntry ::= SEQUENCE {
cisIfLimitVlanNumber VlanIndexOrZero,
cisIfLimitMax Unsigned32,
cisIfLimitExcludeAccessGrp SnmpAdminString,
cisIfLimitStorageType StorageType,
cisIfLimitRowStatus RowStatus
}
cisIfLimitVlanNumber OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the VLAN which IGMP Snooping filters configured in
this entry will be applied on when the interface is in trunk
mode. Value of zero indicates that the corresponding filters
are applicable to every VLAN carried by the trunk when the
interface is in trunk mode, or the interface itself if it is
in not in trunk mode."
::= { cisIfLimitEntry 1 }
cisIfLimitMax OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum number of IGMP group and channels that
allowed on the interaface, or VLAN(s) carried by the interface
if it is in trunk mode."
::= { cisIfLimitEntry 2 }
cisIfLimitExcludeAccessGrp OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the access group that is excluded from the filter
configured via cisIfLimitMax."
DEFVAL { "" }
::= { cisIfLimitEntry 3 }
cisIfLimitStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the storage type of this conceptual row."
DEFVAL { volatile }
::= { cisIfLimitEntry 4 }
cisIfLimitRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation, deletion and
modification of rows in this table.
All writable objects in this row may be modified at any time."
::= { cisIfLimitEntry 5 }
cisIfLimitTotalTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisIfLimitTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of IGMP Snooping total limit
filters."
::= { cisFilteringInfo 2 }
cisIfLimitTotalEntry OBJECT-TYPE
SYNTAX CisIfLimitTotalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing IGMP Snooping total limit filters for a
Layer 2 interface."
INDEX { ifIndex }
::= { cisIfLimitTotalTable 1 }
CisIfLimitTotalEntry ::= SEQUENCE {
cisIfLimitTotalLimitMax Unsigned32,
cisIfLimitTotalExcludeAccessGrp SnmpAdminString,
cisIfLimitTotalStorageType StorageType,
cisIfLimitTotalRowStatus RowStatus
}
cisIfLimitTotalLimitMax OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the maximum total number of IGMP group or channels
that allows on all VLANs carried by the interaface when it is
in trunk mode."
::= { cisIfLimitTotalEntry 1 }
cisIfLimitTotalExcludeAccessGrp OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the access group that is excluded from the
limitation specified by cisIfToltalLimitChannelsAllowed."
::= { cisIfLimitTotalEntry 2 }
cisIfLimitTotalStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the storage type of this conceptual row."
DEFVAL { volatile }
::= { cisIfLimitTotalEntry 3 }
cisIfLimitTotalRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation, deletion and
modification of rows in this table.
All writable objects in this row may be modified at any time."
::= { cisIfLimitTotalEntry 4 }
cisIfAccessGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisIfAccessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of IGMP Snooping filters based on
access-group."
::= { cisFilteringInfo 3 }
cisIfAccessGroupEntry OBJECT-TYPE
SYNTAX CisIfAccessGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An IGMP Snooping access-group filter, containing an access
control list describing which IGMP groups or channels can be
joined on the interface, and/or on which specific VLAN(s) the
filter should be applied when the interface is in trunk mode."
INDEX {
ifIndex,
cisIfAccessGroupVlan
}
::= { cisIfAccessGroupTable 1 }
CisIfAccessGroupEntry ::= SEQUENCE {
cisIfAccessGroupVlan VlanIndexOrZero,
cisIfAccessGroupsChannelsAllowed SnmpAdminString,
cisIfAccessGroupStorageType StorageType,
cisIfAccessGroupRowStatus RowStatus
}
cisIfAccessGroupVlan OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the VLAN which IGMP Snooping filters configured in
this entry will be applied on when the interface is in trunk
mode. Value of zero indicates that the corresponding filters
are applicable to every VLAN carried by the trunk when the
interface is in trunk mode, or the interface itself if it is
in not in trunk mode."
::= { cisIfAccessGroupEntry 1 }
cisIfAccessGroupsChannelsAllowed OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the access group to indicate which IGMP groups or
channels can be joined."
::= { cisIfAccessGroupEntry 2 }
cisIfAccessGroupStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the storage type of this conceptual row."
DEFVAL { volatile }
::= { cisIfAccessGroupEntry 3 }
cisIfAccessGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage creation, deletion and
modification of rows in this table.
Once a row becomes active, value in any column within
such row can not be modified."
::= { cisIfAccessGroupEntry 4 }
cisVlanFilterConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisVlanFilterConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of VLAN. An entry will exist for
each VLAN which supports IGMP Snooping feature."
::= { cisFilteringInfo 4 }
cisVlanFilterConfigEntry OBJECT-TYPE
SYNTAX CisVlanFilterConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing IGMP Snooping filters configuration for
a particular VLAN."
INDEX { cisVlanIndex }
::= { cisVlanFilterConfigTable 1 }
CisVlanFilterConfigEntry ::= SEQUENCE {
cisVlanFilterAccessGroup SnmpAdminString,
cisVlanFilterLimitMax Unsigned32,
cisVlanFilterLimitExclAccessGrp SnmpAdminString,
cisVlanFilterMinVersionAllowed CisIgmpVersion
}
cisVlanFilterAccessGroup OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the access group to control which IGMP group or
channels can be joined on this VLAN.
A zero length string of this instance indicates that there is
no access-group based filter applied to this VLAN."
::= { cisVlanFilterConfigEntry 1 }
cisVlanFilterLimitMax OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the maximum number of IGMP groups or channels that
allows on each switch port in this VLAN, or trunk ports
carrying this VLAN.
Value of zero indicates that there is no limit of number of IGMP
groups or channels that can be joined on switch ports in this
VLAN,
or trunk ports carrying this VLAN."
::= { cisVlanFilterConfigEntry 2 }
cisVlanFilterLimitExclAccessGrp OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the access group that is excluded from the filter
configured via cisVlanFilterLimitMax."
::= { cisVlanFilterConfigEntry 3 }
cisVlanFilterMinVersionAllowed OBJECT-TYPE
SYNTAX CisIgmpVersion
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum version of IGMP hosts allowed on this
VLAN.
Value 'unknown' is not configurable for this object."
::= { cisVlanFilterConfigEntry 4 }
cisFilterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisFilterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing statistics information about IGMP Snooping
filters in the system. An entry is created for each IGMP
Snooping capable interface in the system, or each VLAN carried
by an interface when it is in trunk mode."
::= { cisFilteringInfo 5 }
cisFilterStatsEntry OBJECT-TYPE
SYNTAX CisFilterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry providing statistic information about IGMP Snooping
filter on an IGMP Snooping capable interface, or on a VLAN that
the interface carries when it is in trunk mode."
INDEX {
ifIndex,
cisFilterStatsVlanNumber
}
::= { cisFilterStatsTable 1 }
CisFilterStatsEntry ::= SEQUENCE {
cisFilterStatsVlanNumber VlanIndexOrZero,
cisFilterAccessGroupDenied Counter32,
cisFilterLimitDenied Counter32,
cisFilterTotalLimitDenied Counter32,
cisFilterMinVersionDenied Counter32
}
cisFilterStatsVlanNumber OBJECT-TYPE
SYNTAX VlanIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN which the entry provides statistics
information for, when the interface is in trunk mode.
Value of zero indicates that statistics information provided
in this entry is for the interface that is in access-mode."
::= { cisFilterStatsEntry 1 }
cisFilterAccessGroupDenied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of join-request denied due to
Access-Group filter on the interface, or on the VLAN
indicated by the value of cisFilterStatsVlanNumber when
the interface is in trunk mode."
::= { cisFilterStatsEntry 2 }
cisFilterLimitDenied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of join-request denied due to exceeding
the maximum number of IGMP groups or channels allowed on the
interface, or on the VLAN indicated by the value of
cisFilterStatsVlanNumber when the interface is in trunk mode."
::= { cisFilterStatsEntry 3 }
cisFilterTotalLimitDenied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of join-request denied due to exceeding
the maximum number of IGMP groups or channels across
all VLANs on the interface, when it is in trunk mode."
::= { cisFilterStatsEntry 4 }
cisFilterMinVersionDenied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of join-request denied due to originating
from hosts with lower than minimum required IGMP version on the
interface."
::= { cisFilterStatsEntry 5 }
-- ----------------------------------------
-- cisExplicitTrackingInfo
-- ----------------------------------------
cisVlanExplicitTrackingTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisVlanExplicitTrackingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing configuration information of Explicit Tracking
for IGMP in the system. Explicit Tracking allows the device to
track the IGMP membership status of all hosts in the system that
respond to IGMP Membership Queries. Tracking information is
used to build the explicit-tracking database to serve for
fast-leave processing for IGMPv3 hosts, proxy reporting and
statistic collection.
An entry is created for each IGMP Snooping capable VLAN found in
the device."
::= { cisExplicitTrackingInfo 1 }
cisVlanExplicitTrackingEntry OBJECT-TYPE
SYNTAX CisVlanExplicitTrackingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of Explicit Tracking configuration for a corresponding
VLAN."
INDEX { cisVlanIndex }
::= { cisVlanExplicitTrackingTable 1 }
CisVlanExplicitTrackingEntry ::= SEQUENCE {
cisVlanExplicitTrackingEnabled TruthValue,
cisVlanExplicitTrackingLimit Integer32
}
cisVlanExplicitTrackingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Explicit Tracking is enabled
on this VLAN."
::= { cisVlanExplicitTrackingEntry 1 }
cisVlanExplicitTrackingLimit OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of entries that can
be installed in the explicit-tracking database for this VLAN.
Value of zero for this object indicates that tracking
information for this VLAN will not be installed to the
explicit-tracking database for this VLAN.
Value of -1 for this object indicates that there is no limitation
on the number of entries that can be installed to the
explicit-tracking database for this VLAN."
::= { cisVlanExplicitTrackingEntry 2 }
-- -----------------------------------------
-- Conformance Information
-- -----------------------------------------
cisMIBConformance OBJECT IDENTIFIER
::= { ciscoIgmpSnoopingMIB 2 }
cisMIBCompliances OBJECT IDENTIFIER
::= { cisMIBConformance 1 }
cisMIBGroups OBJECT IDENTIFIER
::= { cisMIBConformance 2 }
-- Compliance statements
cisV2Compliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for device support IGMPv1/v2
Snooping protocol."
MODULE -- this module
MANDATORY-GROUPS { cisSystemGroup }
GROUP cisSystemV2Group
DESCRIPTION
"This group is mandatory in systems that support
global configuration for IGMPv2 Snooping feature."
GROUP cisStatsGroup
DESCRIPTION
"This group is optional, and should be implemented if the
system provides statistics information for IGMP Snooping
protocol version 1 and 2."
::= { cisMIBCompliances 1 }
cisV3Compliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for device support IGMPv3 Snooping
protocol."
MODULE -- this module
MANDATORY-GROUPS { cisSystemGroup }
GROUP cisSystemV2Group
DESCRIPTION
"This group is mandatory in systems that support global
configuration for IGMPv2 Snooping feature."
GROUP cisSystemV3Group
DESCRIPTION
"This group is mandatory in systems that support global
configuration for IGMPv3 Snooping feature."
GROUP cisStatsGroup
DESCRIPTION
"This group is optional, and should be implemented if the
system provides statistics information of IGMP Snooping
protocol version 1 and 2."
GROUP cisV3StatsGroup
DESCRIPTION
"This group is optional, and should be implemented if the
system provides statistics information of IGMP Snooping
protocol version 3."
::= { cisMIBCompliances 2 }
cisIgmpSnoopingMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for device supporting
IGMP Snooping.This compliance is deprecated and
superceded by cisIgmpSnoopingMIBCompliance2."
MODULE -- this module
MANDATORY-GROUPS { cisBaseConfigGroup }
GROUP cisGlobalTcnGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration of Topology Change
Notification (TCN) related parameters."
GROUP cisGlobalSourceOnlyLearnGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration for Source Only
learning via IGMP Snooping."
GROUP cisGlobalIgmpV3ConfigGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration for IGMPv3 Snooping."
GROUP cisGlobalIgmpV3InfoGroup
DESCRIPTION
"This group is optional."
GROUP cisExtConfig1Group
DESCRIPTION
"This group is optional."
GROUP cisExtConfig2Group
DESCRIPTION
"This group is optional."
GROUP cisStatsGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device provides statistics information for IGMP
Snooping for IGMP version 1 and 2."
GROUP cisV3StatsGroup
DESCRIPTION
"The group is optional, and should be implemented if
the device provides statistics information of IGMP
Snooping for IGMP version 3."
GROUP cisRateLimitGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device provides configuration information of
rate-limit controls."
GROUP cisVlanConfigGroup
DESCRIPTION
"This group is mandatory for devices that support IGMP
Snooping configuration per VLAN."
GROUP cisIgmpQuerierConfigGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device is capable to perform the IGMP Querier
functionality."
GROUP cisIgmpQuerierInfoGroup
DESCRIPTION
"This group is optional."
GROUP cisMcastRouterConfigGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device supports Multicast router port management."
GROUP cisMcastGroupInfoGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device maintains multicast group information."
GROUP cisIfConfigGroup
DESCRIPTION
"This group is mandatory only for devices that supports
IGMP Snooping configuration on an interface basis."
OBJECT cisIgmpQuerierAddressType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"Only IPv4 addresses need to be supported."
::= { cisMIBCompliances 3 }
cisIgmpSnoopingMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for device supporting
IGMP Snooping."
MODULE -- this module
MANDATORY-GROUPS { cisBaseConfigGroup }
GROUP cisGlobalTcnGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration of Topology Change
Notification (TCN) related parameters."
GROUP cisGlobalIgmpV3ConfigGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration for IGMPv3 Snooping."
GROUP cisGlobalIgmpV3InfoGroup
DESCRIPTION
"This group is optional."
GROUP cisExtConfig1Group
DESCRIPTION
"This group is optional."
GROUP cisExtConfig2Group
DESCRIPTION
"This group is optional."
GROUP cisStatsGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device provides statistics information for IGMP
Snooping for IGMP version 1 and 2."
GROUP cisV3StatsGroup
DESCRIPTION
"The group is optional, and should be implemented if
the device provides statistics information of IGMP
Snooping for IGMP version 3."
GROUP cisVlanConfigGroup
DESCRIPTION
"This group is mandatory for devices that support IGMP
Snooping configuration per VLAN."
GROUP cisIgmpQuerierConfigGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device is capable to perform the IGMP Querier
functionality."
GROUP cisIgmpQuerierInfoGroup
DESCRIPTION
"This group is optional."
GROUP cisMcastRouterConfigGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device supports Multicast router port management."
GROUP cisMcastGroupInfoGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device maintains multicast group information."
GROUP cisIfConfigGroup
DESCRIPTION
"This group is mandatory only for devices that supports
IGMP Snooping configuration on an interface basis."
GROUP cisL2EntryLimitGroup
DESCRIPTION
"This group is mandatory only for devices that supports
IGMP Snooping configuration for Layer 2 entry limit."
GROUP cisTrackingLimitGroup
DESCRIPTION
"This group is mandatory only for devices that supports
configuration for tracking database limitation in IGMP
Snooping."
GROUP cisSourceOnlyLimitGroup
DESCRIPTION
"This group is mandatory only for devices that support
configuration for Source Only entries in IGMP Snooping."
GROUP cisRateLimitGroup2
DESCRIPTION
"This group is mandatory only for devices that support
configuration of packet limit rate in IGMP Snooping."
GROUP cisVlanConfigGroup2
DESCRIPTION
"This group is mandatory only for devices that support
per VLAN configuration for Leave Query Interval and
Report Suppression in IGMP Snooping."
GROUP cisSourceOnlyAgeTimerInSecGroup
DESCRIPTION
"This group ins mandatory only for devices that support
Source Only control and age timer in seconds."
OBJECT cisIgmpQuerierAddressType
SYNTAX INTEGER {
ipv4(1)
}
DESCRIPTION
"Only IPv4 addresses need to be supported."
::= { cisMIBCompliances 4 }
cisIgmpSnoopingMIBCompliance3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for device supporting
IGMP Snooping."
MODULE -- this module
MANDATORY-GROUPS { cisBaseConfigGroup }
GROUP cisGlobalTcnGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration of Topology Change
Notification (TCN) related parameters."
GROUP cisGlobalIgmpV3ConfigGroup
DESCRIPTION
"This group is mandatory only for the device that
provides global configuration for IGMPv3 Snooping."
GROUP cisGlobalIgmpV3InfoGroup
DESCRIPTION
"This group is optional."
GROUP cisExtConfig1Group
DESCRIPTION
"This group is optional."
GROUP cisExtConfig2Group
DESCRIPTION
"This group is optional."
GROUP cisStatsGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device provides statistics information for IGMP
Snooping for IGMP version 1 and 2."
GROUP cisV3StatsGroup
DESCRIPTION
"The group is optional, and should be implemented if
the device provides statistics information of IGMP
Snooping for IGMP version 3."
GROUP cisVlanConfigGroup
DESCRIPTION
"This group is mandatory for devices that support IGMP
Snooping configuration per VLAN."
GROUP cisIgmpQuerierConfigGroup
DESCRIPTION
"This group is optional, and should be implemented if
the device is capable to perform the IGMP Querier
functionality."
GROUP cisIgmpQuerierInfoGroup
DESCRIPTION
"This group is optional."
GROUP cisIfConfigGroup
DESCRIPTION
"This group is mandatory only for devices that supports
IGMP Snooping configuration on an interface basis."
GROUP cisL2EntryLimitGroup
DESCRIPTION
"This group is mandatory only for devices that supports
IGMP Snooping configuration for Layer 2 entry limit."
GROUP cisTrackingLimitGroup
DESCRIPTION
"This group is mandatory only for devices that supports
configuration for tracking database limitation in IGMP
Snooping."
GROUP cisSourceOnlyLimitGroup
DESCRIPTION
"This group is mandatory only for devices that support
configuration for Source Only entries in IGMP Snooping."
GROUP cisRateLimitGroup2
DESCRIPTION
"This group is mandatory only for devices that support
configuration of packet limit rate in IGMP Snooping."
GROUP cisVlanConfigGroup2
DESCRIPTION
"This group is mandatory only for devices that support
per VLAN configuration for Leave Query Interval and
Report Suppression in IGMP Snooping."
GROUP cisSourceOnlyAgeTimerInSecGroup
DESCRIPTION
"This group is mandatory only for devices that support
Source Only control and age timer in seconds."
GROUP cisMulticastGroupInfoGroup
DESCRIPTION
"This group is mandatory only for devices that support
Multicast group information in IGMP Snooping."
GROUP cisMulticastGroupPortInfoGroup
DESCRIPTION
"This group is mandatory only for devices that support
Multicast group information in IGMP Snooping, having more
than 2048 ports in the system."
GROUP cisMulticastGroupConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
configuration of Multicast group and joining ports in
IGMP Snooping."
GROUP cisMulticastRouterConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
Multicast Router configuration via IGMP Snooping."
GROUP cisLeaveQueryConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
Leave-Query configuration for IGMP Snooping."
GROUP cisQuerierGlobalConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
global configuration for Querier function."
GROUP cisIgmpQuerierConfigExtGroup
DESCRIPTION
"This group is mandatory only for devices that support
per-VLAN configuration for Querier function."
GROUP cisVlanExplicitTrackingCfgGroup
DESCRIPTION
"This group is mandatory only for devices that support
per-VLAN configuration for Explicit Tracking."
GROUP cisRobustnessConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
Robustness configuration for IGMP Snooping."
GROUP cisTimeToLiveConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
Time-To-Live configuration for IGMP Snooping."
GROUP cisRouterAlertConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
Router-Alert configuration for IGMP Snooping."
GROUP cisIfLimitGroup
DESCRIPTION
"This group is mandatory only for devices that support
limit filter configuration for IGMP Snooping."
GROUP cisIfLimitTotalGroup
DESCRIPTION
"This group is mandatory only for devices that support
total limit filter configuration for IGMP Snooping."
GROUP cisIfAccessGroupGroup
DESCRIPTION
"This group is mandatory only for devices that support
access-group filter configuration for IGMP Snooping."
GROUP cisVlanFilterConfigGroup
DESCRIPTION
"This group is mandatory only for devices that support
VLAN-based filter configuration for IGMP Snooping."
GROUP cisFilterStatisticsGroup
DESCRIPTION
"This group is mandatory only for devices that provide
filter statistics information for IGMP Snooping."
GROUP cisQuerierGlobalTcnQueryCountGroup
DESCRIPTION
"This group is mandatory only for devices that support
configuration and information for global querier TCN
query count for IGMP Snooping."
GROUP cisQuerierTcnQueryPendingGroup
DESCRIPTION
"This group is mandatory only for devices that provide
information about pending TCN queries for IGMP Snooping."
OBJECT cisIgmpSnoopingEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisV3ProcessEnabledAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisFastLeaveEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisAdminMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisReportSuppressionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisTopoChangeFloodQueryCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIfTopoChangeFloodEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisTopoChangeQuerySolicitEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisSourceOnlyLearningEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisSourceOnlyEntryAgingTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisRobustnessVariable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisLastMemberQueryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisLastMemberQueryCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisTimeToLiveCheckEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisRouterAlertCheckEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisRateLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanIgmpSnoopingEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanFastLeaveEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanReportSuppressionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanLeaveQueryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanLastMemberQueryCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanRobustnessVariable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanTimeToLiveCheckEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanRouterAlertCheckEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierTcnQueryCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierTcnQueryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierTimerExpiry
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierMaxResponseTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierQueryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierAdminAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierAdminAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIgmpQuerierAdminVersion
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisMcastRouterConfigStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisMcastRouterConfigRowStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support for createAndWait and notInService is not required."
OBJECT cisMulticastGroupConfPortList
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisMulticastGroupConfStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisMulticastGroupConfRowStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisL2EntryLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisEntryTrackingLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisSourceOnlyPercentageScanLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisSourceOnlyLearningLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierTcnQueryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierTimerExpiry
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierMaxResponseTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierQueryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierAddressType
SYNTAX INTEGER {
ipv4(1)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Only ipv4(1) needs to be supported."
OBJECT cisQuerierAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierVersion
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIfLimitMax
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIfLimitExcludeAccessGrp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIfLimitStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIfLimitRowStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support for createAndWait and notInService is not required."
OBJECT cisIfAccessGroupsChannelsAllowed
DESCRIPTION
"Write access is not required."
OBJECT cisIfAccessGroupStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisIfAccessGroupRowStatus
SYNTAX INTEGER {
active(1)
}
WRITE-SYNTAX INTEGER {
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Support for createAndWait and notInService is not required."
OBJECT cisVlanFilterAccessGroup
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanFilterLimitMax
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 addresses need to be supported."
OBJECT cisVlanFilterLimitExclAccessGrp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanFilterMinVersionAllowed
MIN-ACCESS read-only
DESCRIPTION
"Only IPv4 addresses need to be supported."
OBJECT cisVlanExplicitTrackingEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisVlanExplicitTrackingLimit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cisQuerierTcnQueryCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cisMIBCompliances 5 }
-- Units of Conformance
cisSystemGroup OBJECT-GROUP
OBJECTS { cisIgmpSnoopingEnabled }
STATUS deprecated
DESCRIPTION
"A collection of object(s) providing global system information
about, and control over, IGMP Snooping protocol operation on
device."
::= { cisMIBGroups 1 }
cisSystemV2Group OBJECT-GROUP
OBJECTS { cisFastLeaveEnabled }
STATUS deprecated
DESCRIPTION
"A collection of additional objects providing global system
information about, and control over, IGMPv2 Snooping protocol
operation on the device."
::= { cisMIBGroups 2 }
cisSystemV3Group OBJECT-GROUP
OBJECTS {
cisV3ProcessEnabledAdminStatus,
cisV3ProcessEnabledOperStatus,
cisFastBlockEnabled
}
STATUS deprecated
DESCRIPTION
"A collection of additional objects providing global system
information about, and control over, IGMPv3 Snooping protocol
operation on the device."
::= { cisMIBGroups 3 }
cisStatsGroup OBJECT-GROUP
OBJECTS {
cisTxGeneralQueries,
cisTxGroupSpecificQueries,
cisTxReports,
cisTxLeaves,
cisRxGeneralQueries,
cisRxGroupSpecificQueries,
cisRxReports,
cisRxLeaves,
cisRxValidPackets,
cisRxInvalidPackets,
cisRxOtherPackets,
cisRxMACGeneralQueries,
cisRxTopoNotifications
}
STATUS current
DESCRIPTION
"A collection of object(s) providing statistics
information of IGMP Snooping version 1 and 2."
::= { cisMIBGroups 4 }
cisV3StatsGroup OBJECT-GROUP
OBJECTS {
cisV3Allows,
cisV3Blocks,
cisV3IsIncluded,
cisV3IsExcluded,
cisV3ToIncluded,
cisV3ToExcluded
}
STATUS current
DESCRIPTION
"A collection of object(s) providing additional
statistics information of IGMPv3 Snooping."
::= { cisMIBGroups 5 }
cisBaseConfigGroup OBJECT-GROUP
OBJECTS { cisIgmpSnoopingEnabled }
STATUS current
DESCRIPTION
"A basic collection of object(s) providing IGMP Snooping
global configuration."
::= { cisMIBGroups 6 }
cisGlobalIgmpV3ConfigGroup OBJECT-GROUP
OBJECTS {
cisV3ProcessEnabledAdminStatus,
cisV3ProcessEnabledOperStatus,
cisFastBlockEnabled
}
STATUS current
DESCRIPTION
"A collection of global IGMPv3 Snooping related objects."
::= { cisMIBGroups 7 }
cisGlobalIgmpV3InfoGroup OBJECT-GROUP
OBJECTS { cisV3SnoopingSupport }
STATUS current
DESCRIPTION
"A collection of global IGMPv3 Snooping related objects."
::= { cisMIBGroups 8 }
cisExtConfig1Group OBJECT-GROUP
OBJECTS {
cisFastLeaveEnabled,
cisAdminMode,
cisOperMode,
cisLeaveQueryType,
cisAddressAliasingMode,
cisFallbackTime
}
STATUS current
DESCRIPTION
"A miscellaneous collection of object(s) for the device
that supports global IGMP Snooping configuration."
::= { cisMIBGroups 9 }
cisExtConfig2Group OBJECT-GROUP
OBJECTS { cisReportSuppressionEnabled }
STATUS current
DESCRIPTION
"An extended collection of miscellaneous global
configuration IGMP Snooping objects."
::= { cisMIBGroups 10 }
cisGlobalTcnGroup OBJECT-GROUP
OBJECTS {
cisTopoChangeFloodQueryCount,
cisTopoChangeQuerySolicitEnabled
}
STATUS current
DESCRIPTION
"A collection of global Topology Change
Notification (TCN) related configuration objects."
::= { cisMIBGroups 11 }
cisGlobalSourceOnlyLearnGroup OBJECT-GROUP
OBJECTS {
cisSourceOnlyLearningEnabled,
cisSourceOnlyEntryAgeTime
}
STATUS deprecated
DESCRIPTION
"A collection of global Source Only entry learning
objects."
::= { cisMIBGroups 12 }
cisRateLimitGroup OBJECT-GROUP
OBJECTS {
cisGeneralQueryRateLimit,
cisDvmrpRateLimit,
cisMospf1RateLimit,
cisMospf2RateLimit,
cisPimV2RateLimit
}
STATUS deprecated
DESCRIPTION
"A collection of object(s) providing rate-limit information
of protocol packets handling in IGMP Snooping."
::= { cisMIBGroups 13 }
cisVlanConfigGroup OBJECT-GROUP
OBJECTS {
cisVlanIgmpSnoopingEnabled,
cisVlanFastLeaveEnabled,
cisVlanIgmpSnoopingOperMode,
cisVlanIgmpSnoopingLearningMode
}
STATUS current
DESCRIPTION
"A collectoin of objects for VLAN configuration of
IGMP Snooping."
::= { cisMIBGroups 14 }
cisIgmpQuerierConfigGroup OBJECT-GROUP
OBJECTS {
cisIgmpQuerierEnabled,
cisIgmpQuerierState
}
STATUS current
DESCRIPTION
"A collection of object(s) for IGMP Querier configuration
of IGMP Snooping."
::= { cisMIBGroups 15 }
cisIgmpQuerierInfoGroup OBJECT-GROUP
OBJECTS {
cisIgmpQuerierVersion,
cisIgmpQuerierAddressType,
cisIgmpQuerierAddress,
cisIgmpQuerierInterface
}
STATUS current
DESCRIPTION
"A collection of object(s) for IGMP Querier information."
::= { cisMIBGroups 16 }
cisMcastRouterConfigGroup OBJECT-GROUP
OBJECTS {
cisMcastRouterType,
cisMcastRouterRowStatus
}
STATUS deprecated
DESCRIPTION
"A collection of object(s) providing multicast
router port information."
::= { cisMIBGroups 17 }
cisMcastGroupInfoGroup OBJECT-GROUP
OBJECTS {
cisMcastGroupFilterMode,
cisMcastGroupIgmpVersion,
cisMcastGroupIncludeHostCount,
cisMcastGroupExcludeHostCount,
cisMcastGroupPortList
}
STATUS deprecated
DESCRIPTION
"A collection of object(s) providing multicast
group information."
::= { cisMIBGroups 18 }
cisIfConfigGroup OBJECT-GROUP
OBJECTS { cisIfTopoChangeFloodEnabled }
STATUS current
DESCRIPTION
"A collection of object(s) providing IGMP Snoop
configuration on an interface."
::= { cisMIBGroups 19 }
cisL2EntryLimitGroup OBJECT-GROUP
OBJECTS { cisL2EntryLimit }
STATUS current
DESCRIPTION
"A collection of object(s) providing Layer 2 multicast
entries limit configuration and information in
IGMP Snooping."
::= { cisMIBGroups 20 }
cisTrackingLimitGroup OBJECT-GROUP
OBJECTS { cisEntryTrackingLimit }
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration and
information of tracking database limitation in IGMP
Snooping."
::= { cisMIBGroups 21 }
cisSourceOnlyLimitGroup OBJECT-GROUP
OBJECTS {
cisSourceOnlyPercentageScanLimit,
cisSourceOnlyLearningLimit
}
STATUS current
DESCRIPTION
"A collection of object(s) providing Source Only learning
limit configuration and information in IGMP Snooping."
::= { cisMIBGroups 22 }
cisRateLimitGroup2 OBJECT-GROUP
OBJECTS { cisRateLimit }
STATUS current
DESCRIPTION
"A collection of object(s) providing additional rate-limit
information of protocol packets handling in IGMP Snooping."
::= { cisMIBGroups 23 }
cisVlanConfigGroup2 OBJECT-GROUP
OBJECTS {
cisVlanReportSuppressionEnabled,
cisVlanLeaveQueryInterval
}
STATUS current
DESCRIPTION
"A collection of object(s) providing per VLAN configuration
of Report Suppression and Leave Query Interval for IGMP
Snooping."
::= { cisMIBGroups 24 }
cisSourceOnlyAgeTimerInSecGroup OBJECT-GROUP
OBJECTS {
cisSourceOnlyLearningEnabled,
cisSourceOnlyEntryAgingTime
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration and
information of Source Only learning control and
age timer in seconds."
::= { cisMIBGroups 25 }
cisMulticastGroupInfoGroup OBJECT-GROUP
OBJECTS {
cisMulticastGroupGroupType,
cisMulticastGroupIgmpVersion,
cisMulticastGroupSourceUpTime,
cisMulticastGroupSourceExpires,
cisMulticastGroupInclHostCount,
cisMulticastGroupExclHostCount
}
STATUS current
DESCRIPTION
"A collection of object(s) providing information of multicast
group."
::= { cisMIBGroups 26 }
cisMulticastGroupPortInfoGroup OBJECT-GROUP
OBJECTS { cisMulticastGroupPortList }
STATUS current
DESCRIPTION
"A collection of object(s) providing information of
ports joining multicast groups."
::= { cisMIBGroups 27 }
cisMulticastGroupConfigGroup OBJECT-GROUP
OBJECTS {
cisMulticastGroupConfPortList,
cisMulticastGroupConfStorageType,
cisMulticastGroupConfRowStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration of multicast
groups in the system."
::= { cisMIBGroups 28 }
cisMulticastRouterConfigGroup OBJECT-GROUP
OBJECTS {
cisMcastRouterConfigRouterType,
cisMcastRouterConfigStorageType,
cisMcastRouterConfigRowStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration and
information of multicast router ports in the system."
::= { cisMIBGroups 29 }
cisLeaveQueryConfigGroup OBJECT-GROUP
OBJECTS {
cisLastMemberQueryCount,
cisLastMemberQueryInterval,
cisVlanLastMemberQueryCount
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration and
information of Leave Query for IGMP Snooping."
::= { cisMIBGroups 30 }
cisQuerierGlobalConfigGroup OBJECT-GROUP
OBJECTS {
cisQuerierEnabled,
cisQuerierTcnQueryInterval,
cisQuerierTimerExpiry,
cisQuerierMaxResponseTime,
cisQuerierQueryInterval,
cisQuerierAddressType,
cisQuerierAddress,
cisQuerierVersion
}
STATUS current
DESCRIPTION
"A collection of object(s) providing global configuration of
Querier function in the system."
::= { cisMIBGroups 31 }
cisIgmpQuerierConfigExtGroup OBJECT-GROUP
OBJECTS {
cisIgmpQuerierTcnQueryCount,
cisIgmpQuerierTcnQueryInterval,
cisIgmpQuerierTimerExpiry,
cisIgmpQuerierMaxResponseTime,
cisIgmpQuerierQueryInterval,
cisIgmpQuerierAdminAddressType,
cisIgmpQuerierAdminAddress,
cisIgmpQuerierAdminVersion
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration of Querier
parameters for VLANs in the system."
::= { cisMIBGroups 32 }
cisRobustnessConfigGroup OBJECT-GROUP
OBJECTS {
cisRobustnessVariable,
cisVlanRobustnessVariable
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration of Robustness
parameter for IGMP Snooping."
::= { cisMIBGroups 33 }
cisTimeToLiveConfigGroup OBJECT-GROUP
OBJECTS {
cisTimeToLiveCheckEnabled,
cisVlanTimeToLiveCheckEnabled
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration of
Time-To-Leave for IGMP Snooping."
::= { cisMIBGroups 34 }
cisRouterAlertConfigGroup OBJECT-GROUP
OBJECTS {
cisRouterAlertCheckEnabled,
cisVlanRouterAlertCheckEnabled
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration of
Router-Alert for IGMP Snooping."
::= { cisMIBGroups 35 }
cisVlanExplicitTrackingCfgGroup OBJECT-GROUP
OBJECTS {
cisVlanExplicitTrackingEnabled,
cisVlanExplicitTrackingLimit
}
STATUS current
DESCRIPTION
"A collection of object(s) providing configuration of Explicit
Tracking feature on VLANs for IGMP Snooping."
::= { cisMIBGroups 36 }
cisIfLimitGroup OBJECT-GROUP
OBJECTS {
cisIfLimitMax,
cisIfLimitExcludeAccessGrp,
cisIfLimitStorageType,
cisIfLimitRowStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) providing IGMP Snooping Limit filter
configuration and information."
::= { cisMIBGroups 37 }
cisIfLimitTotalGroup OBJECT-GROUP
OBJECTS {
cisIfLimitTotalLimitMax,
cisIfLimitTotalExcludeAccessGrp,
cisIfLimitTotalStorageType,
cisIfLimitTotalRowStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) providing IGMP Snooping Total
Limit filter configuration and information."
::= { cisMIBGroups 38 }
cisIfAccessGroupGroup OBJECT-GROUP
OBJECTS {
cisIfAccessGroupsChannelsAllowed,
cisIfAccessGroupStorageType,
cisIfAccessGroupRowStatus
}
STATUS current
DESCRIPTION
"A collection of object(s) providing IGMP Snooping access-group
filter configuration and information."
::= { cisMIBGroups 39 }
cisVlanFilterConfigGroup OBJECT-GROUP
OBJECTS {
cisVlanFilterAccessGroup,
cisVlanFilterLimitMax,
cisVlanFilterLimitExclAccessGrp,
cisVlanFilterMinVersionAllowed
}
STATUS current
DESCRIPTION
"A collection of object(s) providing VLAN-based filter
configuration for IGMP Snooping."
::= { cisMIBGroups 40 }
cisFilterStatisticsGroup OBJECT-GROUP
OBJECTS {
cisFilterAccessGroupDenied,
cisFilterLimitDenied,
cisFilterTotalLimitDenied,
cisFilterMinVersionDenied
}
STATUS current
DESCRIPTION
"A collection of object(s) providing statistics
information about filters applied to IGMP packets."
::= { cisMIBGroups 41 }
cisQuerierGlobalTcnQueryCountGroup OBJECT-GROUP
OBJECTS { cisQuerierTcnQueryCount }
STATUS current
DESCRIPTION
"A collection of object(s) providing global querier
TCN query count configuration and information for
IGMP Snooping."
::= { cisMIBGroups 42 }
cisQuerierTcnQueryPendingGroup OBJECT-GROUP
OBJECTS { cisIgmpQuerierTcnQueryPending }
STATUS current
DESCRIPTION
"A collection of object(s) providing information about
pending TCN queries for IGMP Snooping."
::= { cisMIBGroups 43 }
END
Reference in New Issue Copy Permalink