5882 lines
194 KiB
Plaintext
5882 lines
194 KiB
Plaintext
|
-- *------------------------------------------------------------------
|
||
|
|
-- * CISCO-IPSEC-FLOW-MONITOR-MIB.my: IPSec Flow Monitoring MIB.
|
||
|
|
-- *
|
||
|
|
-- * April 2000, S Ramakrishnan
|
||
|
|
-- *
|
||
|
|
-- * Copyright (c) 2000, 2004, 2007 by Cisco Systems Inc.
|
||
|
|
-- * All rights reserved.
|
||
|
|
-- *
|
||
|
|
-- *------------------------------------------------------------------
|
||
|
|
|
||
|
|
CISCO-IPSEC-FLOW-MONITOR-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
OBJECT-TYPE,
|
||
|
|
NOTIFICATION-TYPE,
|
||
|
|
Counter32,
|
||
|
|
Counter64,
|
||
|
|
Gauge32,
|
||
|
|
Integer32,
|
||
|
|
Unsigned32
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
MODULE-COMPLIANCE,
|
||
|
|
OBJECT-GROUP,
|
||
|
|
NOTIFICATION-GROUP
|
||
|
|
FROM SNMPv2-CONF
|
||
|
|
TEXTUAL-CONVENTION,
|
||
|
|
DisplayString,
|
||
|
|
TimeStamp,
|
||
|
|
TimeInterval,
|
||
|
|
TruthValue
|
||
|
|
FROM SNMPv2-TC
|
||
|
|
cmgwIndex
|
||
|
|
FROM CISCO-MEDIA-GATEWAY-MIB
|
||
|
|
ciscoMgmt
|
||
|
|
FROM CISCO-SMI;
|
||
|
|
|
||
|
|
|
||
|
|
ciscoIpSecFlowMonitorMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200710240000Z"
|
||
|
|
ORGANIZATION "Tivoli Systems and Cisco Systems"
|
||
|
|
CONTACT-INFO
|
||
|
|
"Tivoli Systems
|
||
|
|
Research Triangle Park, NC
|
||
|
|
|
||
|
|
Cisco Systems
|
||
|
|
170 W Tasman Drive
|
||
|
|
San Jose, CA 95134
|
||
|
|
USA
|
||
|
|
|
||
|
|
Tel: +1 800 553-NETS
|
||
|
|
E-mail: cs-ipsecurity@cisco.com"
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a MIB Module for monitoring the
|
||
|
|
structures in IPSec-based Virtual Private Networks.
|
||
|
|
The MIB has been designed to be adopted as an IETF
|
||
|
|
standard. Hence Cisco-specific features of IPSec
|
||
|
|
protocol are excluded from this MIB.
|
||
|
|
|
||
|
|
Acronyms
|
||
|
|
The following acronyms are used in this document:
|
||
|
|
|
||
|
|
IPSec: Secure IP Protocol
|
||
|
|
|
||
|
|
VPN: Virtual Private Network
|
||
|
|
|
||
|
|
ISAKMP: Internet Security Association and Key Exchange
|
||
|
|
Protocol
|
||
|
|
|
||
|
|
IKE: Internet Key Exchange Protocol
|
||
|
|
|
||
|
|
SA: Security Association
|
||
|
|
|
||
|
|
MM: Main Mode - the process of setting up
|
||
|
|
a Phase 1 SA to secure the exchanges
|
||
|
|
required to setup Phase 2 SAs
|
||
|
|
|
||
|
|
QM: Quick Mode - the process of setting up
|
||
|
|
Phase 2 Security Associations using
|
||
|
|
a Phase 1 SA.
|
||
|
|
|
||
|
|
|
||
|
|
Overview of IPsec MIB
|
||
|
|
|
||
|
|
The MIB contains six major groups of objects which are
|
||
|
|
used to manage the IPSec Protocol. These groups include
|
||
|
|
a Levels Group, a Phase-1 Group, a Phase-2 Group,
|
||
|
|
a History Group, a Failure Group and a TRAP Control Group.
|
||
|
|
The following table illustrates the structure of the
|
||
|
|
IPSec MIB.
|
||
|
|
|
||
|
|
The Phase 1 group models objects pertaining to
|
||
|
|
IKE negotiations and tunnels.
|
||
|
|
|
||
|
|
The Phase 2 group models objects pertaining to
|
||
|
|
IPSec data tunnels.
|
||
|
|
|
||
|
|
The History group is to aid applications that do
|
||
|
|
trending analysis.
|
||
|
|
|
||
|
|
The Failure group is to enable an operator to
|
||
|
|
do troubleshooting and debugging of the VPN Router.
|
||
|
|
Further, counters are supported to aid Intrusion
|
||
|
|
Detection.
|
||
|
|
|
||
|
|
In addition to the five major MIB Groups, there are
|
||
|
|
a number of Notifications. The following table
|
||
|
|
illustrates the name and description of the
|
||
|
|
IPSec TRAPs.
|
||
|
|
|
||
|
|
For a detailed discussion, please refer to the IETF
|
||
|
|
draft draft-ietf-ipsec-flow-monitoring-mib-00.txt."
|
||
|
|
REVISION "200710240000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"In the description of cipSecTunHistHcInDecompOctets,
|
||
|
|
cipSecTunHcInOctets has been changed to
|
||
|
|
cipSecTunHistHcInOctets.
|
||
|
|
|
||
|
|
In the description of cipSecTunHistOutUncompOctets,
|
||
|
|
cipSecTunOutOctets has been changed to
|
||
|
|
cipSecTunHistOutOctets.
|
||
|
|
|
||
|
|
In the description of cipSecTunHistHcOutUncompOctets,
|
||
|
|
cipSecTunHcOutOctets has been changed to
|
||
|
|
cipSecTunHistHcOutOctets.
|
||
|
|
|
||
|
|
In the description of cipSecTunHistInDecompOctets,
|
||
|
|
cipSecTunInOctets has been changed to
|
||
|
|
cipSecTunHistInOctets."
|
||
|
|
REVISION "200410120000Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Added two table for media gateway stats
|
||
|
|
information:
|
||
|
|
cikePhase1GWStatsTable (phase-1 IKE)
|
||
|
|
cipSecPhase2GWStatsTable (phase-2 IPsec)"
|
||
|
|
REVISION "200010131800Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Changed cipSecSpiValue to Unsigned32.
|
||
|
|
Changed Protocol ranges to
|
||
|
|
start at 0 instead of 1.
|
||
|
|
Removed comment(s) incorrectly indicating
|
||
|
|
this MIB was CiscoExperiment."
|
||
|
|
REVISION "200008171259Z"
|
||
|
|
DESCRIPTION
|
||
|
|
"Initial version of this MIB module."
|
||
|
|
::= { ciscoMgmt 171 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- Local Textual Conventions
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
IPSIpAddress ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An IP V4 or V6 Address."
|
||
|
|
SYNTAX OCTET STRING (SIZE (4 | 16))
|
||
|
|
|
||
|
|
-- IP V4 or V6 Address
|
||
|
|
|
||
|
|
IkePeerType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of IPsec Phase-1 IKE peer identity.
|
||
|
|
The IKE peer may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ipAddrPeer(1),
|
||
|
|
namePeer(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
IkeNegoMode ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 IKE negotiation mode."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
main(1),
|
||
|
|
aggressive(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
IkeHashAlgo ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hash algorithm used in IPsec Phase-1
|
||
|
|
IKE negotiations."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
md5(2),
|
||
|
|
sha(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
IkeAuthMethod ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication method used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
preSharedKey(2),
|
||
|
|
rsaSig(3),
|
||
|
|
rsaEncrypt(4),
|
||
|
|
revPublicKey(5)
|
||
|
|
}
|
||
|
|
|
||
|
|
DiffHellmanGrp ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used in negotiations."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
dhGroup1(2),
|
||
|
|
dhGroup2(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
KeyType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of key used by an IPsec Phase-2 Tunnel."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ike(1),
|
||
|
|
manual(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
EncapMode ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encapsulation mode used by an IPsec Phase-2
|
||
|
|
Tunnel."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
tunnel(1),
|
||
|
|
transport(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
EncryptAlgo ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used in negotiations."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
des(2),
|
||
|
|
des3(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
AuthAlgo ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by a
|
||
|
|
security association of an IPsec Phase-2 Tunnel."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
hmacMd5(2),
|
||
|
|
hmacSha(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
CompAlgo ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compression algorithm used by a
|
||
|
|
security association of an IPsec Phase-2 Tunnel."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
ldf(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
EndPtType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of identity use to specify an IPsec End Point."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
singleIpAddr(1),
|
||
|
|
ipAddrRange(2),
|
||
|
|
ipSubnet(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
TunnelStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of a Tunnel. Objects of this type may
|
||
|
|
be used to bring the tunnel down by setting
|
||
|
|
value of this object to destroy(2). Objects of this
|
||
|
|
type cannot be used to create a Tunnel."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
destroy(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
TrapStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The administrative status for sending a TRAP."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
enabled(1),
|
||
|
|
disabled(2)
|
||
|
|
}
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- IPsec MIB Object Groups
|
||
|
|
--
|
||
|
|
-- This MIB module contains the following groups:
|
||
|
|
-- 1) IPsec Levels Group
|
||
|
|
-- 2) IPsec Phase-1 Group
|
||
|
|
-- 3) IPsec Phase-2 Group
|
||
|
|
-- 4) IPsec History Group
|
||
|
|
-- 5) IPsec Failure Group
|
||
|
|
-- 6) IPsec TRAP Control Group
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecMIBObjects OBJECT IDENTIFIER
|
||
|
|
::= { ciscoIpSecFlowMonitorMIB 1 }
|
||
|
|
|
||
|
|
cipSecLevels OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBObjects 1 }
|
||
|
|
|
||
|
|
cipSecPhaseOne OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBObjects 2 }
|
||
|
|
|
||
|
|
cipSecPhaseTwo OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBObjects 3 }
|
||
|
|
|
||
|
|
cipSecHistory OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBObjects 4 }
|
||
|
|
|
||
|
|
cipSecFailures OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBObjects 5 }
|
||
|
|
|
||
|
|
cipSecTrapCntl OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBObjects 6 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- IPsec Levels Group
|
||
|
|
--
|
||
|
|
-- This group consists of a:
|
||
|
|
-- 1) IPsec MIB Level
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecMibLevel OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..4096 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The level of the IPsec MIB."
|
||
|
|
::= { cipSecLevels 1 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-1 Internet Key Exchange (IKE) Group
|
||
|
|
--
|
||
|
|
-- This group consists of:
|
||
|
|
-- 1) IPsec Phase-1 Global Statistics
|
||
|
|
-- 2) IPsec Phase-1 Peer Table
|
||
|
|
-- 3) IPsec Phase-1 Tunnel Table
|
||
|
|
-- 4) IPsec Phase-1 Correlation Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
--
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-1 Global Statistics
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikeGlobalStats OBJECT IDENTIFIER
|
||
|
|
::= { cipSecPhaseOne 1 }
|
||
|
|
|
||
|
|
|
||
|
|
cikeGlobalActiveTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of currently active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 1 }
|
||
|
|
|
||
|
|
cikeGlobalPreviousTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of previously active
|
||
|
|
IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 2 }
|
||
|
|
|
||
|
|
cikeGlobalInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by all currently
|
||
|
|
and previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 3 }
|
||
|
|
|
||
|
|
cikeGlobalInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received by all
|
||
|
|
currently and previously active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 4 }
|
||
|
|
|
||
|
|
cikeGlobalInDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets which were
|
||
|
|
dropped during receive processing by all
|
||
|
|
currently and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 5 }
|
||
|
|
|
||
|
|
cikeGlobalInNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys received by
|
||
|
|
all currently and previously active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 6 }
|
||
|
|
|
||
|
|
cikeGlobalInP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
received by all currently and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 7 }
|
||
|
|
|
||
|
|
cikeGlobalInP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were received and found to be invalid
|
||
|
|
by all currently and previously active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 8 }
|
||
|
|
|
||
|
|
cikeGlobalInP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were received and rejected by all
|
||
|
|
currently and previously active IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 9 }
|
||
|
|
|
||
|
|
cikeGlobalInP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 security
|
||
|
|
association delete requests received by all
|
||
|
|
currently and previously
|
||
|
|
active and IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 10 }
|
||
|
|
|
||
|
|
cikeGlobalOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by all currently
|
||
|
|
and previously active and IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 11 }
|
||
|
|
|
||
|
|
cikeGlobalOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by all currently
|
||
|
|
and previously active and IPsec Phase-1
|
||
|
|
Tunnels."
|
||
|
|
::= { cikeGlobalStats 12 }
|
||
|
|
|
||
|
|
cikeGlobalOutDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets which were dropped
|
||
|
|
during send processing by all currently
|
||
|
|
and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 13 }
|
||
|
|
|
||
|
|
cikeGlobalOutNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys sent by all currently
|
||
|
|
and previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 14 }
|
||
|
|
|
||
|
|
cikeGlobalOutP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were sent by all currently and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 15 }
|
||
|
|
|
||
|
|
cikeGlobalOutP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were sent and found to be invalid by
|
||
|
|
all currently and previously active IPsec Phase-1
|
||
|
|
Tunnels."
|
||
|
|
::= { cikeGlobalStats 16 }
|
||
|
|
|
||
|
|
cikeGlobalOutP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were sent and rejected by all currently and
|
||
|
|
previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 17 }
|
||
|
|
|
||
|
|
cikeGlobalOutP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 SA
|
||
|
|
delete requests sent by all currently and
|
||
|
|
previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 18 }
|
||
|
|
|
||
|
|
cikeGlobalInitTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-1 IKE
|
||
|
|
Tunnels which were locally initiated."
|
||
|
|
::= { cikeGlobalStats 19 }
|
||
|
|
|
||
|
|
cikeGlobalInitTunnelFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-1 IKE Tunnels
|
||
|
|
which were locally initiated and failed to activate."
|
||
|
|
::= { cikeGlobalStats 20 }
|
||
|
|
|
||
|
|
cikeGlobalRespTunnelFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-1 IKE Tunnels
|
||
|
|
which were remotely initiated and failed to activate."
|
||
|
|
::= { cikeGlobalStats 21 }
|
||
|
|
|
||
|
|
cikeGlobalSysCapFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of system capacity failures
|
||
|
|
which occurred during processing of all current
|
||
|
|
and previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 22 }
|
||
|
|
|
||
|
|
cikeGlobalAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of authentications which ended
|
||
|
|
in failure by all current and previous IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 23 }
|
||
|
|
|
||
|
|
cikeGlobalDecryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of decryptions which ended
|
||
|
|
in failure by all current and previous IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 24 }
|
||
|
|
|
||
|
|
cikeGlobalHashValidFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of hash validations which ended
|
||
|
|
in failure by all current and previous IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 25 }
|
||
|
|
|
||
|
|
cikeGlobalNoSaFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of non-existent Security Association
|
||
|
|
in failures which occurred during processing of
|
||
|
|
all current and previous IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikeGlobalStats 26 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-1 Internet Key Exchange Peer Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikePeerTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CikePeerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 Internet Key Exchange Peer Table.
|
||
|
|
There is one entry in this table for each IPsec
|
||
|
|
Phase-1 IKE peer association which is currently
|
||
|
|
associated with an active IPsec Phase-1 Tunnel.
|
||
|
|
The IPsec Phase-1 IKE Tunnel associated with this
|
||
|
|
IPsec Phase-1 IKE peer association may or may not
|
||
|
|
be currently active."
|
||
|
|
::= { cipSecPhaseOne 2 }
|
||
|
|
|
||
|
|
cikePeerEntry OBJECT-TYPE
|
||
|
|
SYNTAX CikePeerEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated
|
||
|
|
with an IPsec Phase-1 IKE peer association."
|
||
|
|
INDEX {
|
||
|
|
cikePeerLocalType,
|
||
|
|
cikePeerLocalValue,
|
||
|
|
cikePeerRemoteType,
|
||
|
|
cikePeerRemoteValue,
|
||
|
|
cikePeerIntIndex
|
||
|
|
}
|
||
|
|
::= { cikePeerTable 1 }
|
||
|
|
|
||
|
|
CikePeerEntry ::= SEQUENCE {
|
||
|
|
cikePeerLocalType IkePeerType,
|
||
|
|
cikePeerLocalValue DisplayString,
|
||
|
|
cikePeerRemoteType IkePeerType,
|
||
|
|
cikePeerRemoteValue DisplayString,
|
||
|
|
cikePeerIntIndex Integer32,
|
||
|
|
cikePeerLocalAddr IPSIpAddress,
|
||
|
|
cikePeerRemoteAddr IPSIpAddress,
|
||
|
|
cikePeerActiveTime TimeInterval,
|
||
|
|
cikePeerActiveTunnelIndex Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
cikePeerLocalType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of local peer identity. The local peer
|
||
|
|
may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikePeerEntry 1 }
|
||
|
|
|
||
|
|
cikePeerLocalValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the local peer identity.
|
||
|
|
|
||
|
|
If the local peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the local peer.
|
||
|
|
|
||
|
|
If the local peer type is a host name, then this is
|
||
|
|
the host name used to identify the local peer."
|
||
|
|
::= { cikePeerEntry 2 }
|
||
|
|
|
||
|
|
cikePeerRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of remote peer identity. The remote peer
|
||
|
|
may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikePeerEntry 3 }
|
||
|
|
|
||
|
|
cikePeerRemoteValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the remote peer identity.
|
||
|
|
|
||
|
|
If the remote peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the remote peer.
|
||
|
|
|
||
|
|
If the remote peer type is a host name, then this is
|
||
|
|
the host name used to identify the remote peer."
|
||
|
|
::= { cikePeerEntry 4 }
|
||
|
|
|
||
|
|
cikePeerIntIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The internal index of the local-remote
|
||
|
|
peer association. This internal index is used
|
||
|
|
to uniquely identify multiple associations between
|
||
|
|
the local and remote peer."
|
||
|
|
::= { cikePeerEntry 5 }
|
||
|
|
|
||
|
|
cikePeerLocalAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the local peer."
|
||
|
|
::= { cikePeerEntry 6 }
|
||
|
|
|
||
|
|
cikePeerRemoteAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the remote peer."
|
||
|
|
::= { cikePeerEntry 7 }
|
||
|
|
|
||
|
|
cikePeerActiveTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time that the peer association has
|
||
|
|
existed in hundredths of a second."
|
||
|
|
::= { cikePeerEntry 8 }
|
||
|
|
|
||
|
|
cikePeerActiveTunnelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the active IPsec Phase-1 IKE Tunnel
|
||
|
|
(cikeTunIndex in the cikeTunnelTable) for this peer
|
||
|
|
association. If an IPsec Phase-1 IKE Tunnel is
|
||
|
|
not currently active, then the value of this
|
||
|
|
object will be zero."
|
||
|
|
::= { cikePeerEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-1 Internet Key Exchange Tunnel Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikeTunnelTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CikeTunnelEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 Internet Key Exchange Tunnel Table.
|
||
|
|
There is one entry in this table for each active IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cipSecPhaseOne 3 }
|
||
|
|
|
||
|
|
cikeTunnelEntry OBJECT-TYPE
|
||
|
|
SYNTAX CikeTunnelEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated with
|
||
|
|
an active IPsec Phase-1 IKE Tunnel."
|
||
|
|
INDEX { cikeTunIndex }
|
||
|
|
::= { cikeTunnelTable 1 }
|
||
|
|
|
||
|
|
CikeTunnelEntry ::= SEQUENCE {
|
||
|
|
cikeTunIndex Integer32,
|
||
|
|
cikeTunLocalType IkePeerType,
|
||
|
|
cikeTunLocalValue DisplayString,
|
||
|
|
cikeTunLocalAddr IPSIpAddress,
|
||
|
|
cikeTunLocalName DisplayString,
|
||
|
|
cikeTunRemoteType IkePeerType,
|
||
|
|
cikeTunRemoteValue DisplayString,
|
||
|
|
cikeTunRemoteAddr IPSIpAddress,
|
||
|
|
cikeTunRemoteName DisplayString,
|
||
|
|
cikeTunNegoMode IkeNegoMode,
|
||
|
|
cikeTunDiffHellmanGrp DiffHellmanGrp,
|
||
|
|
cikeTunEncryptAlgo EncryptAlgo,
|
||
|
|
cikeTunHashAlgo IkeHashAlgo,
|
||
|
|
cikeTunAuthMethod IkeAuthMethod,
|
||
|
|
cikeTunLifeTime Integer32,
|
||
|
|
cikeTunActiveTime TimeInterval,
|
||
|
|
cikeTunSaRefreshThreshold Integer32,
|
||
|
|
cikeTunTotalRefreshes Counter32,
|
||
|
|
cikeTunInOctets Counter32,
|
||
|
|
cikeTunInPkts Counter32,
|
||
|
|
cikeTunInDropPkts Counter32,
|
||
|
|
cikeTunInNotifys Counter32,
|
||
|
|
cikeTunInP2Exchgs Counter32,
|
||
|
|
cikeTunInP2ExchgInvalids Counter32,
|
||
|
|
cikeTunInP2ExchgRejects Counter32,
|
||
|
|
cikeTunInP2SaDelRequests Counter32,
|
||
|
|
cikeTunOutOctets Counter32,
|
||
|
|
cikeTunOutPkts Counter32,
|
||
|
|
cikeTunOutDropPkts Counter32,
|
||
|
|
cikeTunOutNotifys Counter32,
|
||
|
|
cikeTunOutP2Exchgs Counter32,
|
||
|
|
cikeTunOutP2ExchgInvalids Counter32,
|
||
|
|
cikeTunOutP2ExchgRejects Counter32,
|
||
|
|
cikeTunOutP2SaDelRequests Counter32,
|
||
|
|
cikeTunStatus TunnelStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
cikeTunIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the IPsec Phase-1 IKE Tunnel Table.
|
||
|
|
The value of the index is a number which begins
|
||
|
|
at one and is incremented with each tunnel that
|
||
|
|
is created. The value of this object will
|
||
|
|
wrap at 2,147,483,647."
|
||
|
|
::= { cikeTunnelEntry 1 }
|
||
|
|
|
||
|
|
cikeTunLocalType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of local peer identity. The local
|
||
|
|
peer may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikeTunnelEntry 2 }
|
||
|
|
|
||
|
|
cikeTunLocalValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the local peer identity.
|
||
|
|
|
||
|
|
If the local peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the local peer.
|
||
|
|
|
||
|
|
If the local peer type is a host name, then this is
|
||
|
|
the host name used to identify the local peer."
|
||
|
|
::= { cikeTunnelEntry 3 }
|
||
|
|
|
||
|
|
cikeTunLocalAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the local endpoint for the IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 4 }
|
||
|
|
|
||
|
|
cikeTunLocalName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the local IP address for
|
||
|
|
the IPsec Phase-1 IKE Tunnel. If the DNS
|
||
|
|
name associated with the local tunnel endpoint
|
||
|
|
is not known, then the value of this
|
||
|
|
object will be a NULL string."
|
||
|
|
::= { cikeTunnelEntry 5 }
|
||
|
|
|
||
|
|
cikeTunRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of remote peer identity.
|
||
|
|
The remote peer may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikeTunnelEntry 6 }
|
||
|
|
|
||
|
|
cikeTunRemoteValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the remote peer identity.
|
||
|
|
|
||
|
|
If the remote peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the remote peer.
|
||
|
|
|
||
|
|
If the remote peer type is a host name, then
|
||
|
|
this is the host name used to identify the
|
||
|
|
remote peer."
|
||
|
|
::= { cikeTunnelEntry 7 }
|
||
|
|
|
||
|
|
cikeTunRemoteAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the remote endpoint for the IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 8 }
|
||
|
|
|
||
|
|
cikeTunRemoteName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the remote IP address of IPsec Phase-1
|
||
|
|
IKE Tunnel. If the DNS name associated with the remote
|
||
|
|
tunnel endpoint is not known, then the value of this
|
||
|
|
object will be a NULL string."
|
||
|
|
::= { cikeTunnelEntry 9 }
|
||
|
|
|
||
|
|
cikeTunNegoMode OBJECT-TYPE
|
||
|
|
SYNTAX IkeNegoMode
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiation mode of the IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 10 }
|
||
|
|
|
||
|
|
cikeTunDiffHellmanGrp OBJECT-TYPE
|
||
|
|
SYNTAX DiffHellmanGrp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelEntry 11 }
|
||
|
|
|
||
|
|
cikeTunEncryptAlgo OBJECT-TYPE
|
||
|
|
SYNTAX EncryptAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelEntry 12 }
|
||
|
|
|
||
|
|
cikeTunHashAlgo OBJECT-TYPE
|
||
|
|
SYNTAX IkeHashAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hash algorithm used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelEntry 13 }
|
||
|
|
|
||
|
|
cikeTunAuthMethod OBJECT-TYPE
|
||
|
|
SYNTAX IkeAuthMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication method used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelEntry 14 }
|
||
|
|
|
||
|
|
cikeTunLifeTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel
|
||
|
|
in seconds."
|
||
|
|
::= { cikeTunnelEntry 15 }
|
||
|
|
|
||
|
|
cikeTunActiveTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time the IPsec Phase-1 IKE tunnel has been
|
||
|
|
active in hundredths of seconds."
|
||
|
|
::= { cikeTunnelEntry 16 }
|
||
|
|
|
||
|
|
cikeTunSaRefreshThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The security association refresh threshold in seconds."
|
||
|
|
::= { cikeTunnelEntry 17 }
|
||
|
|
|
||
|
|
cikeTunTotalRefreshes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "QM Exchanges"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security associations
|
||
|
|
refreshes performed."
|
||
|
|
::= { cikeTunnelEntry 18 }
|
||
|
|
|
||
|
|
cikeTunInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 19 }
|
||
|
|
|
||
|
|
cikeTunInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 20 }
|
||
|
|
|
||
|
|
cikeTunInDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
by this IPsec Phase-1 IKE Tunnel during
|
||
|
|
receive processing."
|
||
|
|
::= { cikeTunnelEntry 21 }
|
||
|
|
|
||
|
|
cikeTunInNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys received by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 22 }
|
||
|
|
|
||
|
|
cikeTunInP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2
|
||
|
|
exchanges received by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 23 }
|
||
|
|
|
||
|
|
cikeTunInP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2
|
||
|
|
exchanges received and found to be invalid
|
||
|
|
by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 24 }
|
||
|
|
|
||
|
|
cikeTunInP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
received and rejected by this IPsec Phase-1
|
||
|
|
Tunnel."
|
||
|
|
::= { cikeTunnelEntry 25 }
|
||
|
|
|
||
|
|
cikeTunInP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2
|
||
|
|
security association delete requests received
|
||
|
|
by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 26 }
|
||
|
|
|
||
|
|
cikeTunOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 27 }
|
||
|
|
|
||
|
|
cikeTunOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 28 }
|
||
|
|
|
||
|
|
cikeTunOutDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped by this
|
||
|
|
IPsec Phase-1 IKE Tunnel during send processing."
|
||
|
|
::= { cikeTunnelEntry 29 }
|
||
|
|
|
||
|
|
cikeTunOutNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys sent by this
|
||
|
|
IPsec Phase-1 Tunnel."
|
||
|
|
::= { cikeTunnelEntry 30 }
|
||
|
|
|
||
|
|
cikeTunOutP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges sent by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 31 }
|
||
|
|
|
||
|
|
cikeTunOutP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges sent and
|
||
|
|
found to be invalid by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 32 }
|
||
|
|
|
||
|
|
cikeTunOutP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges sent and
|
||
|
|
rejected by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 33 }
|
||
|
|
|
||
|
|
cikeTunOutP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 security association
|
||
|
|
delete requests sent by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelEntry 34 }
|
||
|
|
|
||
|
|
cikeTunStatus OBJECT-TYPE
|
||
|
|
SYNTAX TunnelStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the MIB table row.
|
||
|
|
|
||
|
|
This object can be used to bring the tunnel down
|
||
|
|
by setting value of this object to destroy(2).
|
||
|
|
|
||
|
|
This object cannot be used to create
|
||
|
|
a MIB table row."
|
||
|
|
::= { cikeTunnelEntry 35 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The Internet Key Exchange Peer Association to
|
||
|
|
-- Phase-2 Tunnel Correlation Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikePeerCorrTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CikePeerCorrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 Internet Key Exchange Peer
|
||
|
|
Association to IPsec Phase-2 Tunnel
|
||
|
|
Correlation Table. There is one entry in
|
||
|
|
this table for each active IPsec Phase-2
|
||
|
|
Tunnel."
|
||
|
|
::= { cipSecPhaseOne 4 }
|
||
|
|
|
||
|
|
cikePeerCorrEntry OBJECT-TYPE
|
||
|
|
SYNTAX CikePeerCorrEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes of an
|
||
|
|
IPsec Phase-1 IKE Peer Association to IPsec
|
||
|
|
Phase-2 Tunnel Correlation."
|
||
|
|
INDEX {
|
||
|
|
cikePeerCorrLocalType,
|
||
|
|
cikePeerCorrLocalValue,
|
||
|
|
cikePeerCorrRemoteType,
|
||
|
|
cikePeerCorrRemoteValue,
|
||
|
|
cikePeerCorrIntIndex,
|
||
|
|
cikePeerCorrSeqNum
|
||
|
|
}
|
||
|
|
::= { cikePeerCorrTable 1 }
|
||
|
|
|
||
|
|
CikePeerCorrEntry ::= SEQUENCE {
|
||
|
|
cikePeerCorrLocalType IkePeerType,
|
||
|
|
cikePeerCorrLocalValue DisplayString,
|
||
|
|
cikePeerCorrRemoteType IkePeerType,
|
||
|
|
cikePeerCorrRemoteValue DisplayString,
|
||
|
|
cikePeerCorrIntIndex Integer32,
|
||
|
|
cikePeerCorrSeqNum Integer32,
|
||
|
|
cikePeerCorrIpSecTunIndex Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
cikePeerCorrLocalType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of local peer identity. The local peer
|
||
|
|
may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikePeerCorrEntry 1 }
|
||
|
|
|
||
|
|
cikePeerCorrLocalValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the local peer identity.
|
||
|
|
|
||
|
|
If the local peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the local peer.
|
||
|
|
|
||
|
|
If the local peer type is a host name, then this is
|
||
|
|
the host name used to identify the local peer."
|
||
|
|
::= { cikePeerCorrEntry 2 }
|
||
|
|
|
||
|
|
cikePeerCorrRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of remote peer identity. The remote peer
|
||
|
|
may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikePeerCorrEntry 3 }
|
||
|
|
|
||
|
|
cikePeerCorrRemoteValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the remote peer identity.
|
||
|
|
|
||
|
|
If the remote peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the remote peer.
|
||
|
|
|
||
|
|
If the remote peer type is a host name, then this is
|
||
|
|
the host name used to identify the remote peer."
|
||
|
|
::= { cikePeerCorrEntry 4 }
|
||
|
|
|
||
|
|
cikePeerCorrIntIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The internal index of the local-remote
|
||
|
|
peer association. This internal index is
|
||
|
|
used to uniquely identify multiple associations
|
||
|
|
between the local and remote peer."
|
||
|
|
::= { cikePeerCorrEntry 5 }
|
||
|
|
|
||
|
|
cikePeerCorrSeqNum OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The sequence number of the local-remote
|
||
|
|
peer association. This sequence number is
|
||
|
|
used to uniquely identify multiple instances
|
||
|
|
of an unique association between
|
||
|
|
the local and remote peer."
|
||
|
|
::= { cikePeerCorrEntry 6 }
|
||
|
|
|
||
|
|
cikePeerCorrIpSecTunIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the active IPsec Phase-2 Tunnel
|
||
|
|
(cipSecTunIndex in the cipSecTunnelTable) for this
|
||
|
|
IPsec Phase-1 IKE Peer Association."
|
||
|
|
::= { cikePeerCorrEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
--
|
||
|
|
-- cikePhase1GWStatsTable
|
||
|
|
--
|
||
|
|
-- Gateway Phase-1 IKE stats information
|
||
|
|
--
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikePhase1GWStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CikePhase1GWStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Phase-1 IKE stats information is included in this table.
|
||
|
|
Each entry is related to a specific gateway which is
|
||
|
|
identified by 'cmgwIndex'."
|
||
|
|
::= { cipSecPhaseOne 5 }
|
||
|
|
|
||
|
|
cikePhase1GWStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX CikePhase1GWStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes of an Phase-1 IKE stats
|
||
|
|
information for the related gateway.
|
||
|
|
|
||
|
|
There is only one entry for each gateway. The entry
|
||
|
|
is created when a gateway up and cannot be deleted."
|
||
|
|
INDEX { cmgwIndex }
|
||
|
|
::= { cikePhase1GWStatsTable 1 }
|
||
|
|
|
||
|
|
CikePhase1GWStatsEntry ::= SEQUENCE {
|
||
|
|
cikePhase1GWActiveTunnels Gauge32,
|
||
|
|
cikePhase1GWPreviousTunnels Counter32,
|
||
|
|
cikePhase1GWInOctets Counter32,
|
||
|
|
cikePhase1GWInPkts Counter32,
|
||
|
|
cikePhase1GWInDropPkts Counter32,
|
||
|
|
cikePhase1GWInNotifys Counter32,
|
||
|
|
cikePhase1GWInP2Exchgs Counter32,
|
||
|
|
cikePhase1GWInP2ExchgInvalids Counter32,
|
||
|
|
cikePhase1GWInP2ExchgRejects Counter32,
|
||
|
|
cikePhase1GWInP2SaDelRequests Counter32,
|
||
|
|
cikePhase1GWOutOctets Counter32,
|
||
|
|
cikePhase1GWOutPkts Counter32,
|
||
|
|
cikePhase1GWOutDropPkts Counter32,
|
||
|
|
cikePhase1GWOutNotifys Counter32,
|
||
|
|
cikePhase1GWOutP2Exchgs Counter32,
|
||
|
|
cikePhase1GWOutP2ExchgInvalids Counter32,
|
||
|
|
cikePhase1GWOutP2ExchgRejects Counter32,
|
||
|
|
cikePhase1GWOutP2SaDelRequests Counter32,
|
||
|
|
cikePhase1GWInitTunnels Counter32,
|
||
|
|
cikePhase1GWInitTunnelFails Counter32,
|
||
|
|
cikePhase1GWRespTunnelFails Counter32,
|
||
|
|
cikePhase1GWSysCapFails Counter32,
|
||
|
|
cikePhase1GWAuthFails Counter32,
|
||
|
|
cikePhase1GWDecryptFails Counter32,
|
||
|
|
cikePhase1GWHashValidFails Counter32,
|
||
|
|
cikePhase1GWNoSaFails Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
cikePhase1GWActiveTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of currently active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 1 }
|
||
|
|
|
||
|
|
cikePhase1GWPreviousTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of previously active
|
||
|
|
IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 2 }
|
||
|
|
|
||
|
|
cikePhase1GWInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by all currently
|
||
|
|
and previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 3 }
|
||
|
|
|
||
|
|
cikePhase1GWInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received by all
|
||
|
|
currently and previously active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 4 }
|
||
|
|
|
||
|
|
cikePhase1GWInDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets which were
|
||
|
|
dropped during receive processing by all
|
||
|
|
currently and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 5 }
|
||
|
|
|
||
|
|
cikePhase1GWInNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys received by
|
||
|
|
all currently and previously active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 6 }
|
||
|
|
|
||
|
|
cikePhase1GWInP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
received by all currently and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 7 }
|
||
|
|
|
||
|
|
cikePhase1GWInP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were received and found to be invalid
|
||
|
|
by all currently and previously active IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 8 }
|
||
|
|
|
||
|
|
cikePhase1GWInP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were received and rejected by all
|
||
|
|
currently and previously active IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 9 }
|
||
|
|
|
||
|
|
cikePhase1GWInP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 'Security
|
||
|
|
Association' delete requests received by all
|
||
|
|
currently and previously active and IPsec
|
||
|
|
Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 10 }
|
||
|
|
|
||
|
|
cikePhase1GWOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by all currently
|
||
|
|
and previously active and IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 11 }
|
||
|
|
|
||
|
|
cikePhase1GWOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by all currently
|
||
|
|
and previously active and IPsec Phase-1
|
||
|
|
Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 12 }
|
||
|
|
|
||
|
|
cikePhase1GWOutDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets which were dropped
|
||
|
|
during send processing by all currently
|
||
|
|
and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 13 }
|
||
|
|
|
||
|
|
cikePhase1GWOutNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys sent by all currently
|
||
|
|
and previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 14 }
|
||
|
|
|
||
|
|
cikePhase1GWOutP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were sent by all currently and previously
|
||
|
|
active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 15 }
|
||
|
|
|
||
|
|
cikePhase1GWOutP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were sent and found to be invalid by
|
||
|
|
all currently and previously active IPsec Phase-1
|
||
|
|
Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 16 }
|
||
|
|
|
||
|
|
cikePhase1GWOutP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges
|
||
|
|
which were sent and rejected by all currently and
|
||
|
|
previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 17 }
|
||
|
|
|
||
|
|
cikePhase1GWOutP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 SA
|
||
|
|
delete requests sent by all currently and
|
||
|
|
previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 18 }
|
||
|
|
|
||
|
|
cikePhase1GWInitTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-1 IKE
|
||
|
|
Tunnels which were locally initiated."
|
||
|
|
::= { cikePhase1GWStatsEntry 19 }
|
||
|
|
|
||
|
|
cikePhase1GWInitTunnelFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-1 IKE Tunnels
|
||
|
|
which were locally initiated and failed to activate."
|
||
|
|
::= { cikePhase1GWStatsEntry 20 }
|
||
|
|
|
||
|
|
cikePhase1GWRespTunnelFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-1 IKE Tunnels
|
||
|
|
which were remotely initiated and failed to activate."
|
||
|
|
::= { cikePhase1GWStatsEntry 21 }
|
||
|
|
|
||
|
|
cikePhase1GWSysCapFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of system capacity failures
|
||
|
|
which occurred during processing of all current
|
||
|
|
and previously active IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 22 }
|
||
|
|
|
||
|
|
cikePhase1GWAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of authentications which ended
|
||
|
|
in failure by all current and previous IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 23 }
|
||
|
|
|
||
|
|
cikePhase1GWDecryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of decryptions which ended
|
||
|
|
in failure by all current and previous IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 24 }
|
||
|
|
|
||
|
|
cikePhase1GWHashValidFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of hash validations which ended
|
||
|
|
in failure by all current and previous IPsec Phase-1
|
||
|
|
IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 25 }
|
||
|
|
|
||
|
|
cikePhase1GWNoSaFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of non-existent 'Security Association'
|
||
|
|
failures occurred during processing of current and
|
||
|
|
previous IPsec Phase-1 IKE Tunnels."
|
||
|
|
::= { cikePhase1GWStatsEntry 26 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- IPsec Phase-2 Group
|
||
|
|
--
|
||
|
|
-- This group consists of:
|
||
|
|
-- 1) IPsec Phase-2 Global Statistics
|
||
|
|
-- 2) IPsec Phase-2 Tunnel Table
|
||
|
|
-- 3) IPsec Phase-2 Endpoint Table
|
||
|
|
-- 4) IPsec Phase-2 Security Protection Index Table
|
||
|
|
-- 4) IPsec Phase-2 Security Protection Index Objects
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
--
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Global Tunnel Statistics
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecGlobalStats OBJECT IDENTIFIER
|
||
|
|
::= { cipSecPhaseTwo 1 }
|
||
|
|
|
||
|
|
|
||
|
|
cipSecGlobalActiveTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of currently active
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 1 }
|
||
|
|
|
||
|
|
cipSecGlobalPreviousTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Phase-2 Tunnels"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of previously active
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 2 }
|
||
|
|
|
||
|
|
cipSecGlobalInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by all
|
||
|
|
current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is
|
||
|
|
accumulated BEFORE determining whether or not
|
||
|
|
the packet should be decompressed. See also
|
||
|
|
cipSecGlobalInOctWraps for the number of times
|
||
|
|
this counter has wrapped."
|
||
|
|
::= { cipSecGlobalStats 3 }
|
||
|
|
|
||
|
|
cipSecGlobalHcInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of
|
||
|
|
octets received by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels. This value is accumulated
|
||
|
|
BEFORE determining whether or not the packet
|
||
|
|
should be decompressed."
|
||
|
|
::= { cipSecGlobalStats 4 }
|
||
|
|
|
||
|
|
cipSecGlobalInOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global octets received
|
||
|
|
counter (cipSecGlobalInOctets) has wrapped."
|
||
|
|
::= { cipSecGlobalStats 5 }
|
||
|
|
|
||
|
|
cipSecGlobalInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of decompressed octets received
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated AFTER the packet is
|
||
|
|
decompressed. If compression is not being used,
|
||
|
|
this value will match the value of cipSecGlobalInOctets.
|
||
|
|
See also cipSecGlobalInDecompOctWraps
|
||
|
|
for the number of times this counter has wrapped."
|
||
|
|
::= { cipSecGlobalStats 6 }
|
||
|
|
|
||
|
|
cipSecGlobalHcInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number
|
||
|
|
of decompressed octets received by all current
|
||
|
|
and previous IPsec Phase-2 Tunnels. This value
|
||
|
|
is accumulated AFTER the packet is decompressed.
|
||
|
|
If compression is not being used, this value
|
||
|
|
will match the value of cipSecGlobalHcInOctets."
|
||
|
|
::= { cipSecGlobalStats 7 }
|
||
|
|
|
||
|
|
cipSecGlobalInDecompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global decompressed
|
||
|
|
octets received counter
|
||
|
|
(cipSecGlobalInDecompOctets) has wrapped."
|
||
|
|
::= { cipSecGlobalStats 8 }
|
||
|
|
|
||
|
|
cipSecGlobalInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received
|
||
|
|
by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 9 }
|
||
|
|
|
||
|
|
cipSecGlobalInDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
during receive processing by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels. This count does
|
||
|
|
NOT include packets dropped due to
|
||
|
|
Anti-Replay processing."
|
||
|
|
::= { cipSecGlobalStats 10 }
|
||
|
|
|
||
|
|
cipSecGlobalInReplayDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during
|
||
|
|
receive processing due to Anti-Replay
|
||
|
|
processing by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 11 }
|
||
|
|
|
||
|
|
cipSecGlobalInAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
performed by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 12 }
|
||
|
|
|
||
|
|
cipSecGlobalInAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
which ended in failure by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 13 }
|
||
|
|
|
||
|
|
cipSecGlobalInDecrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's
|
||
|
|
performed by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 14 }
|
||
|
|
|
||
|
|
cipSecGlobalInDecryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's
|
||
|
|
which ended in failure by all current and
|
||
|
|
previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 15 }
|
||
|
|
|
||
|
|
cipSecGlobalOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by all
|
||
|
|
current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated AFTER determining
|
||
|
|
whether or not the packet should be compressed.
|
||
|
|
See also cipSecGlobalOutOctWraps for the
|
||
|
|
number of times this counter has wrapped."
|
||
|
|
::= { cipSecGlobalStats 16 }
|
||
|
|
|
||
|
|
cipSecGlobalHcOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number
|
||
|
|
of octets sent by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels. This value is accumulated
|
||
|
|
AFTER determining whether or not the packet should
|
||
|
|
be compressed."
|
||
|
|
::= { cipSecGlobalStats 17 }
|
||
|
|
|
||
|
|
cipSecGlobalOutOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global octets sent counter
|
||
|
|
(cipSecGlobalOutOctets) has wrapped."
|
||
|
|
::= { cipSecGlobalStats 18 }
|
||
|
|
|
||
|
|
cipSecGlobalOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of uncompressed octets sent
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated BEFORE the packet is
|
||
|
|
compressed. If compression is not being used, this
|
||
|
|
value will match the value of cipSecGlobalOutOctets.
|
||
|
|
See also cipSecGlobalOutDecompOctWraps for the number
|
||
|
|
of times this counter has wrapped."
|
||
|
|
::= { cipSecGlobalStats 19 }
|
||
|
|
|
||
|
|
cipSecGlobalHcOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of
|
||
|
|
uncompressed octets sent by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels. This value is accumulated
|
||
|
|
BEFORE the packet is compressed. If compression is
|
||
|
|
not being used, this value will match the
|
||
|
|
value of cipSecGlobalHcOutOctets."
|
||
|
|
::= { cipSecGlobalStats 20 }
|
||
|
|
|
||
|
|
cipSecGlobalOutUncompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global uncompressed
|
||
|
|
octets sent counter (cipSecGlobalOutUncompOctets)
|
||
|
|
has wrapped."
|
||
|
|
::= { cipSecGlobalStats 21 }
|
||
|
|
|
||
|
|
cipSecGlobalOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by all
|
||
|
|
current and previous
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 22 }
|
||
|
|
|
||
|
|
cipSecGlobalOutDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during send
|
||
|
|
processing by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 23 }
|
||
|
|
|
||
|
|
cipSecGlobalOutAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's
|
||
|
|
performed by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 24 }
|
||
|
|
|
||
|
|
cipSecGlobalOutAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's
|
||
|
|
which ended in failure
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 25 }
|
||
|
|
|
||
|
|
cipSecGlobalOutEncrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's performed
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 26 }
|
||
|
|
|
||
|
|
cipSecGlobalOutEncryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's
|
||
|
|
which ended in failure by all current and
|
||
|
|
previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 27 }
|
||
|
|
|
||
|
|
cipSecGlobalProtocolUseFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of protocol use failures
|
||
|
|
which occurred during processing of all current
|
||
|
|
and previously active IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 28 }
|
||
|
|
|
||
|
|
cipSecGlobalNoSaFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of non-existent
|
||
|
|
Security Association in failures which occurred
|
||
|
|
during processing of all current
|
||
|
|
and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 29 }
|
||
|
|
|
||
|
|
cipSecGlobalSysCapFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of system capacity failures
|
||
|
|
which occurred during processing of all current
|
||
|
|
and previously active IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecGlobalStats 30 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Tunnel Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecTunnelTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecTunnelEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Tunnel Table.
|
||
|
|
There is one entry in this table for
|
||
|
|
each active IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecPhaseTwo 2 }
|
||
|
|
|
||
|
|
cipSecTunnelEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecTunnelEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes
|
||
|
|
associated with an active IPsec Phase-2 Tunnel."
|
||
|
|
INDEX { cipSecTunIndex }
|
||
|
|
::= { cipSecTunnelTable 1 }
|
||
|
|
|
||
|
|
CipSecTunnelEntry ::= SEQUENCE {
|
||
|
|
cipSecTunIndex Integer32,
|
||
|
|
cipSecTunIkeTunnelIndex Integer32,
|
||
|
|
cipSecTunIkeTunnelAlive TruthValue,
|
||
|
|
cipSecTunLocalAddr IPSIpAddress,
|
||
|
|
cipSecTunRemoteAddr IPSIpAddress,
|
||
|
|
cipSecTunKeyType KeyType,
|
||
|
|
cipSecTunEncapMode EncapMode,
|
||
|
|
cipSecTunLifeSize Integer32,
|
||
|
|
cipSecTunLifeTime Integer32,
|
||
|
|
cipSecTunActiveTime TimeInterval,
|
||
|
|
cipSecTunSaLifeSizeThreshold Integer32,
|
||
|
|
cipSecTunSaLifeTimeThreshold Integer32,
|
||
|
|
cipSecTunTotalRefreshes Counter32,
|
||
|
|
cipSecTunExpiredSaInstances Counter32,
|
||
|
|
cipSecTunCurrentSaInstances Gauge32,
|
||
|
|
cipSecTunInSaDiffHellmanGrp DiffHellmanGrp,
|
||
|
|
cipSecTunInSaEncryptAlgo EncryptAlgo,
|
||
|
|
cipSecTunInSaAhAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunInSaEspAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunInSaDecompAlgo CompAlgo,
|
||
|
|
cipSecTunOutSaDiffHellmanGrp DiffHellmanGrp,
|
||
|
|
cipSecTunOutSaEncryptAlgo EncryptAlgo,
|
||
|
|
cipSecTunOutSaAhAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunOutSaEspAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunOutSaCompAlgo CompAlgo,
|
||
|
|
cipSecTunInOctets Counter32,
|
||
|
|
cipSecTunHcInOctets Counter64,
|
||
|
|
cipSecTunInOctWraps Counter32,
|
||
|
|
cipSecTunInDecompOctets Counter32,
|
||
|
|
cipSecTunHcInDecompOctets Counter64,
|
||
|
|
cipSecTunInDecompOctWraps Counter32,
|
||
|
|
cipSecTunInPkts Counter32,
|
||
|
|
cipSecTunInDropPkts Counter32,
|
||
|
|
cipSecTunInReplayDropPkts Counter32,
|
||
|
|
cipSecTunInAuths Counter32,
|
||
|
|
cipSecTunInAuthFails Counter32,
|
||
|
|
cipSecTunInDecrypts Counter32,
|
||
|
|
cipSecTunInDecryptFails Counter32,
|
||
|
|
cipSecTunOutOctets Counter32,
|
||
|
|
cipSecTunHcOutOctets Counter64,
|
||
|
|
cipSecTunOutOctWraps Counter32,
|
||
|
|
cipSecTunOutUncompOctets Counter32,
|
||
|
|
cipSecTunHcOutUncompOctets Counter64,
|
||
|
|
cipSecTunOutUncompOctWraps Counter32,
|
||
|
|
cipSecTunOutPkts Counter32,
|
||
|
|
cipSecTunOutDropPkts Counter32,
|
||
|
|
cipSecTunOutAuths Counter32,
|
||
|
|
cipSecTunOutAuthFails Counter32,
|
||
|
|
cipSecTunOutEncrypts Counter32,
|
||
|
|
cipSecTunOutEncryptFails Counter32,
|
||
|
|
cipSecTunStatus TunnelStatus
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecTunIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the IPsec Phase-2 Tunnel Table.
|
||
|
|
The value of the index is a number which begins
|
||
|
|
at one and is incremented with each tunnel that
|
||
|
|
is created. The value of this object will wrap
|
||
|
|
at 2,147,483,647."
|
||
|
|
::= { cipSecTunnelEntry 1 }
|
||
|
|
|
||
|
|
cipSecTunIkeTunnelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the associated IPsec Phase-1
|
||
|
|
IKE Tunnel.
|
||
|
|
(cikeTunIndex in the cikeTunnelTable)"
|
||
|
|
::= { cipSecTunnelEntry 2 }
|
||
|
|
|
||
|
|
cipSecTunIkeTunnelAlive OBJECT-TYPE
|
||
|
|
SYNTAX TruthValue
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An indicator which specifies whether or not the
|
||
|
|
IPsec Phase-1 IKE Tunnel currently exists."
|
||
|
|
::= { cipSecTunnelEntry 3 }
|
||
|
|
|
||
|
|
cipSecTunLocalAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the local endpoint for the IPsec
|
||
|
|
Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 4 }
|
||
|
|
|
||
|
|
cipSecTunRemoteAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the remote endpoint for the IPsec
|
||
|
|
Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 5 }
|
||
|
|
|
||
|
|
cipSecTunKeyType OBJECT-TYPE
|
||
|
|
SYNTAX KeyType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of key used by the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 6 }
|
||
|
|
|
||
|
|
cipSecTunEncapMode OBJECT-TYPE
|
||
|
|
SYNTAX EncapMode
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encapsulation mode used by the
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 7 }
|
||
|
|
|
||
|
|
cipSecTunLifeSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "KBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiated LifeSize of the
|
||
|
|
IPsec Phase-2 Tunnel in kilobytes."
|
||
|
|
::= { cipSecTunnelEntry 8 }
|
||
|
|
|
||
|
|
cipSecTunLifeTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiated LifeTime of the
|
||
|
|
IPsec Phase-2 Tunnel in seconds."
|
||
|
|
::= { cipSecTunnelEntry 9 }
|
||
|
|
|
||
|
|
cipSecTunActiveTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time the IPsec Phase-2
|
||
|
|
Tunnel has been
|
||
|
|
active in hundredths of seconds."
|
||
|
|
::= { cipSecTunnelEntry 10 }
|
||
|
|
|
||
|
|
cipSecTunSaLifeSizeThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "KBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The security association LifeSize refresh
|
||
|
|
threshold in kilobytes."
|
||
|
|
::= { cipSecTunnelEntry 11 }
|
||
|
|
|
||
|
|
cipSecTunSaLifeTimeThreshold OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The security association LifeTime refresh
|
||
|
|
threshold in seconds."
|
||
|
|
::= { cipSecTunnelEntry 12 }
|
||
|
|
|
||
|
|
cipSecTunTotalRefreshes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "QM Exchanges"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security
|
||
|
|
association refreshes performed."
|
||
|
|
::= { cipSecTunnelEntry 13 }
|
||
|
|
|
||
|
|
cipSecTunExpiredSaInstances OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security associations
|
||
|
|
which have expired."
|
||
|
|
::= { cipSecTunnelEntry 14 }
|
||
|
|
|
||
|
|
cipSecTunCurrentSaInstances OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of security associations
|
||
|
|
which are currently active or expiring."
|
||
|
|
::= { cipSecTunnelEntry 15 }
|
||
|
|
|
||
|
|
cipSecTunInSaDiffHellmanGrp OBJECT-TYPE
|
||
|
|
SYNTAX DiffHellmanGrp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used
|
||
|
|
by the inbound security association of the
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 16 }
|
||
|
|
|
||
|
|
cipSecTunInSaEncryptAlgo OBJECT-TYPE
|
||
|
|
SYNTAX EncryptAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used by the inbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 17 }
|
||
|
|
|
||
|
|
cipSecTunInSaAhAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the inbound
|
||
|
|
authentication header (AH) security association of
|
||
|
|
the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 18 }
|
||
|
|
|
||
|
|
cipSecTunInSaEspAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the inbound
|
||
|
|
encapsulation security protocol (ESP) security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 19 }
|
||
|
|
|
||
|
|
cipSecTunInSaDecompAlgo OBJECT-TYPE
|
||
|
|
SYNTAX CompAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The decompression algorithm used by the inbound
|
||
|
|
security association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 20 }
|
||
|
|
|
||
|
|
cipSecTunOutSaDiffHellmanGrp OBJECT-TYPE
|
||
|
|
SYNTAX DiffHellmanGrp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used by the outbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 21 }
|
||
|
|
|
||
|
|
cipSecTunOutSaEncryptAlgo OBJECT-TYPE
|
||
|
|
SYNTAX EncryptAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used by the outbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 22 }
|
||
|
|
|
||
|
|
cipSecTunOutSaAhAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the outbound
|
||
|
|
authentication header (AH) security association of
|
||
|
|
the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 23 }
|
||
|
|
|
||
|
|
cipSecTunOutSaEspAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the inbound
|
||
|
|
encapsulation security protocol (ESP)
|
||
|
|
security association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 24 }
|
||
|
|
|
||
|
|
cipSecTunOutSaCompAlgo OBJECT-TYPE
|
||
|
|
SYNTAX CompAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compression algorithm used by the inbound
|
||
|
|
security association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 25 }
|
||
|
|
|
||
|
|
cipSecTunInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by this IPsec
|
||
|
|
Phase-2 Tunnel. This value is accumulated
|
||
|
|
BEFORE determining whether or not the packet should be
|
||
|
|
decompressed. See also cipSecTunInOctWraps for the
|
||
|
|
number of times this counter has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 26 }
|
||
|
|
|
||
|
|
cipSecTunHcInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of octets
|
||
|
|
received by this IPsec Phase-2 Tunnel. This value is
|
||
|
|
accumulated BEFORE determining whether or not the packet
|
||
|
|
should be decompressed."
|
||
|
|
::= { cipSecTunnelEntry 27 }
|
||
|
|
|
||
|
|
cipSecTunInOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the octets received counter
|
||
|
|
(cipSecTunInOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 28 }
|
||
|
|
|
||
|
|
cipSecTunInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of decompressed octets received
|
||
|
|
by this IPsec Phase-2 Tunnel. This value is
|
||
|
|
accumulated AFTER the packet is decompressed.
|
||
|
|
If compression is not being
|
||
|
|
used, this value will match the value of
|
||
|
|
cipSecTunInOctets. See also cipSecTunInDecompOctWraps
|
||
|
|
for the number of times
|
||
|
|
this counter has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 29 }
|
||
|
|
|
||
|
|
cipSecTunHcInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of decompressed
|
||
|
|
octets received by this IPsec Phase-2 Tunnel. This value
|
||
|
|
is accumulated AFTER the packet is decompressed. If
|
||
|
|
compression is not being used, this value will match the
|
||
|
|
value of cipSecTunHcInOctets."
|
||
|
|
::= { cipSecTunnelEntry 30 }
|
||
|
|
|
||
|
|
cipSecTunInDecompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the decompressed
|
||
|
|
octets received counter
|
||
|
|
(cipSecTunInDecompOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 31 }
|
||
|
|
|
||
|
|
cipSecTunInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 32 }
|
||
|
|
|
||
|
|
cipSecTunInDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
during receive processing by this IPsec Phase-2
|
||
|
|
Tunnel. This count does NOT include
|
||
|
|
packets dropped due to Anti-Replay processing."
|
||
|
|
::= { cipSecTunnelEntry 33 }
|
||
|
|
|
||
|
|
cipSecTunInReplayDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during
|
||
|
|
receive processing due to Anti-Replay processing
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 34 }
|
||
|
|
|
||
|
|
cipSecTunInAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound
|
||
|
|
authentication's performed by this
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 35 }
|
||
|
|
|
||
|
|
cipSecTunInAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
which ended in
|
||
|
|
failure by this IPsec Phase-2 Tunnel ."
|
||
|
|
::= { cipSecTunnelEntry 36 }
|
||
|
|
|
||
|
|
cipSecTunInDecrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 37 }
|
||
|
|
|
||
|
|
cipSecTunInDecryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's
|
||
|
|
which ended in failure
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 38 }
|
||
|
|
|
||
|
|
cipSecTunOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by this IPsec
|
||
|
|
Phase-2 Tunnel. This value is accumulated
|
||
|
|
AFTER determining whether or not the packet should
|
||
|
|
be compressed. See also cipSecTunOutOctWraps for
|
||
|
|
the number of times this counter has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 39 }
|
||
|
|
|
||
|
|
cipSecTunHcOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of octets
|
||
|
|
sent by this IPsec Phase-2 Tunnel. This value is
|
||
|
|
accumulated AFTER determining whether or not the
|
||
|
|
packet
|
||
|
|
should be compressed."
|
||
|
|
::= { cipSecTunnelEntry 40 }
|
||
|
|
|
||
|
|
cipSecTunOutOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the out octets counter
|
||
|
|
(cipSecTunOutOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 41 }
|
||
|
|
|
||
|
|
cipSecTunOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of uncompressed octets sent
|
||
|
|
by this IPsec Phase-2 Tunnel. This value
|
||
|
|
is accumulated BEFORE the packet is compressed.
|
||
|
|
If compression is not being used, this value
|
||
|
|
will match the value of cipSecTunOutOctets.
|
||
|
|
See also cipSecTunOutDecompOctWraps for the
|
||
|
|
number of times this counter has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 42 }
|
||
|
|
|
||
|
|
cipSecTunHcOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number
|
||
|
|
of uncompressed octets sent by this IPsec
|
||
|
|
Phase-2 Tunnel. This value is accumulated BEFORE
|
||
|
|
the packet is compressed. If compression
|
||
|
|
is not being used, this value will match the value
|
||
|
|
of cipSecTunHcOutOctets."
|
||
|
|
::= { cipSecTunnelEntry 43 }
|
||
|
|
|
||
|
|
cipSecTunOutUncompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the uncompressed octets sent
|
||
|
|
counter (cipSecTunOutUncompOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelEntry 44 }
|
||
|
|
|
||
|
|
cipSecTunOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by this
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 45 }
|
||
|
|
|
||
|
|
cipSecTunOutDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during
|
||
|
|
send processing by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 46 }
|
||
|
|
|
||
|
|
cipSecTunOutAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 47 }
|
||
|
|
|
||
|
|
cipSecTunOutAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound
|
||
|
|
authentication's which ended in failure
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 48 }
|
||
|
|
|
||
|
|
cipSecTunOutEncrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 49 }
|
||
|
|
|
||
|
|
cipSecTunOutEncryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's
|
||
|
|
which ended in failure by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelEntry 50 }
|
||
|
|
|
||
|
|
cipSecTunStatus OBJECT-TYPE
|
||
|
|
SYNTAX TunnelStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the MIB table row.
|
||
|
|
|
||
|
|
This object can be used to bring the tunnel down
|
||
|
|
by setting value of this object to destroy(2).
|
||
|
|
When the value is set to destroy(2), the SA
|
||
|
|
bundle is destroyed and this row is deleted
|
||
|
|
from this table.
|
||
|
|
|
||
|
|
When this MIB value is queried, the value of
|
||
|
|
active(1) is always returned, if the instance
|
||
|
|
exists.
|
||
|
|
|
||
|
|
This object cannot be used to create a MIB
|
||
|
|
table row."
|
||
|
|
::= { cipSecTunnelEntry 51 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Tunnel Endpoint Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecEndPtTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecEndPtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Tunnel Endpoint Table.
|
||
|
|
This table contains an entry for each
|
||
|
|
active endpoint associated with an IPsec
|
||
|
|
Phase-2 Tunnel."
|
||
|
|
::= { cipSecPhaseTwo 3 }
|
||
|
|
|
||
|
|
cipSecEndPtEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecEndPtEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"An IPsec Phase-2 Tunnel Endpoint entry."
|
||
|
|
INDEX {
|
||
|
|
cipSecTunIndex,
|
||
|
|
cipSecEndPtIndex
|
||
|
|
}
|
||
|
|
::= { cipSecEndPtTable 1 }
|
||
|
|
|
||
|
|
CipSecEndPtEntry ::= SEQUENCE {
|
||
|
|
cipSecEndPtIndex Integer32,
|
||
|
|
cipSecEndPtLocalName DisplayString,
|
||
|
|
cipSecEndPtLocalType EndPtType,
|
||
|
|
cipSecEndPtLocalAddr1 IPSIpAddress,
|
||
|
|
cipSecEndPtLocalAddr2 IPSIpAddress,
|
||
|
|
cipSecEndPtLocalProtocol Integer32,
|
||
|
|
cipSecEndPtLocalPort Integer32,
|
||
|
|
cipSecEndPtRemoteName DisplayString,
|
||
|
|
cipSecEndPtRemoteType EndPtType,
|
||
|
|
cipSecEndPtRemoteAddr1 IPSIpAddress,
|
||
|
|
cipSecEndPtRemoteAddr2 IPSIpAddress,
|
||
|
|
cipSecEndPtRemoteProtocol Integer32,
|
||
|
|
cipSecEndPtRemotePort Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecEndPtIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of the Endpoint associated with the
|
||
|
|
IPsec Phase-2 Tunnel Table. The value of this
|
||
|
|
index is a number which begins at one and
|
||
|
|
is incremented with each Endpoint associated
|
||
|
|
with an IPsec Phase-2 Tunnel.
|
||
|
|
The value of this object will wrap at 2,147,483,647."
|
||
|
|
::= { cipSecEndPtEntry 1 }
|
||
|
|
|
||
|
|
cipSecEndPtLocalName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the local Endpoint."
|
||
|
|
::= { cipSecEndPtEntry 2 }
|
||
|
|
|
||
|
|
cipSecEndPtLocalType OBJECT-TYPE
|
||
|
|
SYNTAX EndPtType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of identity for the local Endpoint.
|
||
|
|
Possible values are:
|
||
|
|
1) a single IP address, or
|
||
|
|
2) an IP address range, or
|
||
|
|
3) an IP subnet."
|
||
|
|
::= { cipSecEndPtEntry 3 }
|
||
|
|
|
||
|
|
cipSecEndPtLocalAddr1 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local Endpoint's first IP address specification.
|
||
|
|
|
||
|
|
If the local Endpoint type is single IP address,
|
||
|
|
then this is the value of the IP address.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP address range,
|
||
|
|
then this is the value of beginning IP address
|
||
|
|
of the range."
|
||
|
|
::= { cipSecEndPtEntry 4 }
|
||
|
|
|
||
|
|
cipSecEndPtLocalAddr2 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local Endpoint's second IP address specification.
|
||
|
|
|
||
|
|
If the local Endpoint type is single IP address,
|
||
|
|
then this is the value of the IP address.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet mask.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP address range,
|
||
|
|
then this is the value of ending IP address
|
||
|
|
of the range."
|
||
|
|
::= { cipSecEndPtEntry 5 }
|
||
|
|
|
||
|
|
cipSecEndPtLocalProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The protocol number of the local Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtEntry 6 }
|
||
|
|
|
||
|
|
cipSecEndPtLocalPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the local Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtEntry 7 }
|
||
|
|
|
||
|
|
cipSecEndPtRemoteName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the remote Endpoint."
|
||
|
|
::= { cipSecEndPtEntry 8 }
|
||
|
|
|
||
|
|
cipSecEndPtRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX EndPtType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of identity for the remote Endpoint.
|
||
|
|
Possible values are:
|
||
|
|
1) a single IP address, or
|
||
|
|
2) an IP address range, or
|
||
|
|
3) an IP subnet."
|
||
|
|
::= { cipSecEndPtEntry 9 }
|
||
|
|
|
||
|
|
cipSecEndPtRemoteAddr1 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remote Endpoint's first IP address specification.
|
||
|
|
|
||
|
|
If the remote Endpoint type is single IP address,
|
||
|
|
then this is the value of the IP address.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP address range,
|
||
|
|
then this is the value of beginning IP address
|
||
|
|
of the range."
|
||
|
|
::= { cipSecEndPtEntry 10 }
|
||
|
|
|
||
|
|
cipSecEndPtRemoteAddr2 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remote Endpoint's second IP address specification.
|
||
|
|
|
||
|
|
If the remote Endpoint type is single IP address,
|
||
|
|
then this is the value of the IP address.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet mask.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP address range,
|
||
|
|
then this is the value of ending IP address of
|
||
|
|
the range."
|
||
|
|
::= { cipSecEndPtEntry 11 }
|
||
|
|
|
||
|
|
cipSecEndPtRemoteProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The protocol number of the remote Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtEntry 12 }
|
||
|
|
|
||
|
|
cipSecEndPtRemotePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the remote Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtEntry 13 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Security Protection Index Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecSpiTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecSpiEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Security Protection Index Table.
|
||
|
|
This table contains an entry for each active
|
||
|
|
and expiring security
|
||
|
|
association."
|
||
|
|
::= { cipSecPhaseTwo 4 }
|
||
|
|
|
||
|
|
cipSecSpiEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecSpiEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated with
|
||
|
|
active and expiring IPsec Phase-2
|
||
|
|
security associations."
|
||
|
|
INDEX {
|
||
|
|
cipSecTunIndex,
|
||
|
|
cipSecSpiIndex
|
||
|
|
}
|
||
|
|
::= { cipSecSpiTable 1 }
|
||
|
|
|
||
|
|
CipSecSpiEntry ::= SEQUENCE {
|
||
|
|
cipSecSpiIndex Integer32,
|
||
|
|
cipSecSpiDirection INTEGER ,
|
||
|
|
cipSecSpiValue Unsigned32,
|
||
|
|
cipSecSpiProtocol INTEGER ,
|
||
|
|
cipSecSpiStatus INTEGER
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecSpiIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of the SPI associated with the
|
||
|
|
Phase-2 Tunnel Table. The value of this
|
||
|
|
index is a number which begins at one and is
|
||
|
|
incremented with each SPI associated with an
|
||
|
|
IPsec Phase-2 Tunnel. The value of this
|
||
|
|
object will wrap at 2,147,483,647."
|
||
|
|
::= { cipSecSpiEntry 1 }
|
||
|
|
|
||
|
|
cipSecSpiDirection OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
in(1),
|
||
|
|
out(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The direction of the SPI."
|
||
|
|
::= { cipSecSpiEntry 2 }
|
||
|
|
|
||
|
|
cipSecSpiValue OBJECT-TYPE
|
||
|
|
SYNTAX Unsigned32 (1..4294967295 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the SPI."
|
||
|
|
::= { cipSecSpiEntry 3 }
|
||
|
|
|
||
|
|
cipSecSpiProtocol OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ah(1),
|
||
|
|
esp(2),
|
||
|
|
ipcomp(3)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The protocol of the SPI."
|
||
|
|
::= { cipSecSpiEntry 4 }
|
||
|
|
|
||
|
|
cipSecSpiStatus OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
active(1),
|
||
|
|
expiring(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The status of the SPI."
|
||
|
|
::= { cipSecSpiEntry 5 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
--
|
||
|
|
-- cipSecPhase2GWStatsTable
|
||
|
|
--
|
||
|
|
-- Gateway Phase-2 IPsec stats information
|
||
|
|
--
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecPhase2GWStatsTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecPhase2GWStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Phase-2 IPsec stats information is included in this table.
|
||
|
|
Each entry is related to a specific gateway which is
|
||
|
|
identified by 'cmgwIndex'"
|
||
|
|
::= { cipSecPhaseTwo 5 }
|
||
|
|
|
||
|
|
cipSecPhase2GWStatsEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecPhase2GWStatsEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes of an Phase-2 IPsec stats
|
||
|
|
information for the related gateway.
|
||
|
|
|
||
|
|
There is only one entry for each gateway. The entry
|
||
|
|
is created when a gateway up and cannot be deleted."
|
||
|
|
INDEX { cmgwIndex }
|
||
|
|
::= { cipSecPhase2GWStatsTable 1 }
|
||
|
|
|
||
|
|
CipSecPhase2GWStatsEntry ::= SEQUENCE {
|
||
|
|
cipSecPhase2GWActiveTunnels Gauge32,
|
||
|
|
cipSecPhase2GWPreviousTunnels Counter32,
|
||
|
|
cipSecPhase2GWInOctets Counter32,
|
||
|
|
cipSecPhase2GWInOctWraps Counter32,
|
||
|
|
cipSecPhase2GWInDecompOctets Counter32,
|
||
|
|
cipSecPhase2GWInDecompOctWraps Counter32,
|
||
|
|
cipSecPhase2GWInPkts Counter32,
|
||
|
|
cipSecPhase2GWInDrops Counter32,
|
||
|
|
cipSecPhase2GWInReplayDrops Counter32,
|
||
|
|
cipSecPhase2GWInAuths Counter32,
|
||
|
|
cipSecPhase2GWInAuthFails Counter32,
|
||
|
|
cipSecPhase2GWInDecrypts Counter32,
|
||
|
|
cipSecPhase2GWInDecryptFails Counter32,
|
||
|
|
cipSecPhase2GWOutOctets Counter32,
|
||
|
|
cipSecPhase2GWOutOctWraps Counter32,
|
||
|
|
cipSecPhase2GWOutUncompOctets Counter32,
|
||
|
|
cipSecPhase2GWOutUncompOctWraps Counter32,
|
||
|
|
cipSecPhase2GWOutPkts Counter32,
|
||
|
|
cipSecPhase2GWOutDrops Counter32,
|
||
|
|
cipSecPhase2GWOutAuths Counter32,
|
||
|
|
cipSecPhase2GWOutAuthFails Counter32,
|
||
|
|
cipSecPhase2GWOutEncrypts Counter32,
|
||
|
|
cipSecPhase2GWOutEncryptFails Counter32,
|
||
|
|
cipSecPhase2GWProtocolUseFails Counter32,
|
||
|
|
cipSecPhase2GWNoSaFails Counter32,
|
||
|
|
cipSecPhase2GWSysCapFails Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecPhase2GWActiveTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Gauge32
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of currently active
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 1 }
|
||
|
|
|
||
|
|
cipSecPhase2GWPreviousTunnels OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Phase-2 Tunnels"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of previously active
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 2 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by all
|
||
|
|
current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated BEFORE determining
|
||
|
|
whether or not the packet should be decompressed.
|
||
|
|
See also cipSecGlobalInOctWraps for the number
|
||
|
|
of times this counter has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 3 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global octets received
|
||
|
|
counter (cipSecGlobalInOctets) has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 4 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of decompressed octets received
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated AFTER the packet is
|
||
|
|
decompressed. If compression is not being used,
|
||
|
|
this value will match the value of cipSecGlobalInOctets.
|
||
|
|
See also cipSecGlobalInDecompOctWraps
|
||
|
|
for the number of times this counter has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 5 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInDecompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global decompressed
|
||
|
|
octets received counter (cipSecGlobalInDecompOctets)
|
||
|
|
has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 6 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 7 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
during receive processing by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels. This count does NOT include
|
||
|
|
packets dropped due to Anti-Replay processing."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 8 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInReplayDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during
|
||
|
|
receive processing due to Anti-Replay
|
||
|
|
processing by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 9 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
performed by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 10 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
which ended in failure by all current and previous
|
||
|
|
IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 11 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInDecrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's
|
||
|
|
performed by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 12 }
|
||
|
|
|
||
|
|
cipSecPhase2GWInDecryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's
|
||
|
|
which ended in failure by all current and
|
||
|
|
previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 13 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by all
|
||
|
|
current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated AFTER determining
|
||
|
|
whether or not the packet should be compressed.
|
||
|
|
See also cipSecGlobalOutOctWraps for the
|
||
|
|
number of times this counter has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 14 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global octets sent counter
|
||
|
|
(cipSecGlobalOutOctets) has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 15 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of uncompressed octets sent
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels.
|
||
|
|
This value is accumulated BEFORE the packet is
|
||
|
|
compressed. If compression is not being used, this
|
||
|
|
value will match the value of cipSecGlobalOutOctets.
|
||
|
|
See also cipSecGlobalOutDecompOctWraps for the number
|
||
|
|
of times this counter has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 16 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutUncompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the global uncompressed
|
||
|
|
octets sent counter (cipSecGlobalOutUncompOctets)
|
||
|
|
has wrapped."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 17 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by all
|
||
|
|
current and previous IPsec Phase-2
|
||
|
|
Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 18 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutDrops OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during send
|
||
|
|
processing by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 19 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's
|
||
|
|
performed by all current and previous IPsec
|
||
|
|
Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 20 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's
|
||
|
|
which ended in failure
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 21 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutEncrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's performed
|
||
|
|
by all current and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 22 }
|
||
|
|
|
||
|
|
cipSecPhase2GWOutEncryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's
|
||
|
|
which ended in failure by all current and
|
||
|
|
previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 23 }
|
||
|
|
|
||
|
|
cipSecPhase2GWProtocolUseFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of protocol use failures
|
||
|
|
which occurred during processing of all current
|
||
|
|
and previously active IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 24 }
|
||
|
|
|
||
|
|
cipSecPhase2GWNoSaFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of non-existent
|
||
|
|
Security Association in failures which occurred
|
||
|
|
during processing of all current
|
||
|
|
and previous IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 25 }
|
||
|
|
|
||
|
|
cipSecPhase2GWSysCapFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of system capacity failures
|
||
|
|
which occurred during processing of all current
|
||
|
|
and previously active IPsec Phase-2 Tunnels."
|
||
|
|
::= { cipSecPhase2GWStatsEntry 26 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec History Group
|
||
|
|
--
|
||
|
|
-- This group consists of a:
|
||
|
|
-- 1) IPsec History Global Objects
|
||
|
|
-- 2) IPsec Phase-1 History Objects
|
||
|
|
-- 3) IPsec Phase-2 History Objects
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecHistGlobal OBJECT IDENTIFIER
|
||
|
|
::= { cipSecHistory 1 }
|
||
|
|
|
||
|
|
cipSecHistPhaseOne OBJECT IDENTIFIER
|
||
|
|
::= { cipSecHistory 2 }
|
||
|
|
|
||
|
|
cipSecHistPhaseTwo OBJECT IDENTIFIER
|
||
|
|
::= { cipSecHistory 3 }
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- IPsec History Global Control Objects
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecHistGlobalCntl OBJECT IDENTIFIER
|
||
|
|
::= { cipSecHistGlobal 1 }
|
||
|
|
|
||
|
|
|
||
|
|
cipSecHistTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The window size of the IPsec Phase-1 and Phase-2
|
||
|
|
History Tables.
|
||
|
|
|
||
|
|
The IPsec Phase-1 and Phase-2 History Tables are
|
||
|
|
implemented as a sliding window in which only the
|
||
|
|
last n entries are maintained. This object is used
|
||
|
|
specify the number of entries which will be
|
||
|
|
maintained in the IPsec Phase-1 and
|
||
|
|
Phase-2 History Tables.
|
||
|
|
|
||
|
|
An implementation may choose suitable minimum and
|
||
|
|
maximum values for this element based on the local
|
||
|
|
policy and available resources. If an SNMP SET request
|
||
|
|
specifies a value outside this window for this element,
|
||
|
|
a BAD VALUE may be returned."
|
||
|
|
::= { cipSecHistGlobalCntl 1 }
|
||
|
|
|
||
|
|
cipSecHistCheckPoint OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
ready(1),
|
||
|
|
checkPoint(2)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The current state of check point processing.
|
||
|
|
|
||
|
|
This object will return ready when the agent is
|
||
|
|
ready to create on-demand history entries for
|
||
|
|
active IPsec Tunnels or checkPoint when the
|
||
|
|
agent is currently creating on-demand history
|
||
|
|
entries for active IPsec Tunnels.
|
||
|
|
|
||
|
|
By setting this value to checkPoint, the agent
|
||
|
|
will create:
|
||
|
|
a) an entry in the IPsec Phase-1 Tunnel History
|
||
|
|
for each active IPsec Phase-1 Tunnel and
|
||
|
|
b) an entry in the IPsec Phase-2 Tunnel History
|
||
|
|
Table and an entry in the IPsec Phase-2
|
||
|
|
Tunnel EndPoint History Table
|
||
|
|
for each active IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecHistGlobalCntl 2 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-1 Tunnel History Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikeTunnelHistTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CikeTunnelHistEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 Internet Key Exchange Tunnel
|
||
|
|
History Table. This table is implemented as a
|
||
|
|
sliding window in which only the last n entries
|
||
|
|
are maintained. The maximum number of entries
|
||
|
|
is specified by the cipSecHistTableSize object."
|
||
|
|
::= { cipSecHistPhaseOne 1 }
|
||
|
|
|
||
|
|
cikeTunnelHistEntry OBJECT-TYPE
|
||
|
|
SYNTAX CikeTunnelHistEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes
|
||
|
|
associated with a previously active IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
INDEX { cikeTunHistIndex }
|
||
|
|
::= { cikeTunnelHistTable 1 }
|
||
|
|
|
||
|
|
CikeTunnelHistEntry ::= SEQUENCE {
|
||
|
|
cikeTunHistIndex Integer32,
|
||
|
|
cikeTunHistTermReason INTEGER ,
|
||
|
|
cikeTunHistActiveIndex Integer32,
|
||
|
|
cikeTunHistPeerLocalType IkePeerType,
|
||
|
|
cikeTunHistPeerLocalValue DisplayString,
|
||
|
|
cikeTunHistPeerIntIndex Integer32,
|
||
|
|
cikeTunHistPeerRemoteType IkePeerType,
|
||
|
|
cikeTunHistPeerRemoteValue DisplayString,
|
||
|
|
cikeTunHistLocalAddr IPSIpAddress,
|
||
|
|
cikeTunHistLocalName DisplayString,
|
||
|
|
cikeTunHistRemoteAddr IPSIpAddress,
|
||
|
|
cikeTunHistRemoteName DisplayString,
|
||
|
|
cikeTunHistNegoMode IkeNegoMode,
|
||
|
|
cikeTunHistDiffHellmanGrp DiffHellmanGrp,
|
||
|
|
cikeTunHistEncryptAlgo EncryptAlgo,
|
||
|
|
cikeTunHistHashAlgo IkeHashAlgo,
|
||
|
|
cikeTunHistAuthMethod IkeAuthMethod,
|
||
|
|
cikeTunHistLifeTime Integer32,
|
||
|
|
cikeTunHistStartTime TimeStamp,
|
||
|
|
cikeTunHistActiveTime TimeInterval,
|
||
|
|
cikeTunHistTotalRefreshes Counter32,
|
||
|
|
cikeTunHistTotalSas Counter32,
|
||
|
|
cikeTunHistInOctets Counter32,
|
||
|
|
cikeTunHistInPkts Counter32,
|
||
|
|
cikeTunHistInDropPkts Counter32,
|
||
|
|
cikeTunHistInNotifys Counter32,
|
||
|
|
cikeTunHistInP2Exchgs Counter32,
|
||
|
|
cikeTunHistInP2ExchgInvalids Counter32,
|
||
|
|
cikeTunHistInP2ExchgRejects Counter32,
|
||
|
|
cikeTunHistInP2SaDelRequests Counter32,
|
||
|
|
cikeTunHistOutOctets Counter32,
|
||
|
|
cikeTunHistOutPkts Counter32,
|
||
|
|
cikeTunHistOutDropPkts Counter32,
|
||
|
|
cikeTunHistOutNotifys Counter32,
|
||
|
|
cikeTunHistOutP2Exchgs Counter32,
|
||
|
|
cikeTunHistOutP2ExchgInvalids Counter32,
|
||
|
|
cikeTunHistOutP2ExchgRejects Counter32,
|
||
|
|
cikeTunHistOutP2SaDelRequests Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
cikeTunHistIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the IPsec Phase-1 IKE Tunnel History
|
||
|
|
Table. The value of the index is a number which
|
||
|
|
begins at one and is incremented with each
|
||
|
|
tunnel that ends. The value of this object
|
||
|
|
will wrap at 2,147,483,647."
|
||
|
|
::= { cikeTunnelHistEntry 1 }
|
||
|
|
|
||
|
|
cikeTunHistTermReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
normal(2),
|
||
|
|
operRequest(3),
|
||
|
|
peerDelRequest(4),
|
||
|
|
peerLost(5),
|
||
|
|
localFailure(6),
|
||
|
|
checkPointReg(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The reason the IPsec Phase-1 IKE Tunnel was terminated.
|
||
|
|
Possible reasons include:
|
||
|
|
1 = other
|
||
|
|
2 = normal termination
|
||
|
|
3 = operator request
|
||
|
|
4 = peer delete request was received
|
||
|
|
5 = contact with peer was lost
|
||
|
|
6 = local failure occurred.
|
||
|
|
7 = operator initiated check point request"
|
||
|
|
::= { cikeTunnelHistEntry 2 }
|
||
|
|
|
||
|
|
cikeTunHistActiveIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the previously active IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 3 }
|
||
|
|
|
||
|
|
cikeTunHistPeerLocalType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of local peer identity. The local peer
|
||
|
|
may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikeTunnelHistEntry 4 }
|
||
|
|
|
||
|
|
cikeTunHistPeerLocalValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the local peer identity.
|
||
|
|
|
||
|
|
If the local peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the local peer.
|
||
|
|
|
||
|
|
If the local peer type is a host name, then this is
|
||
|
|
the host name used to identify the local peer."
|
||
|
|
::= { cikeTunnelHistEntry 5 }
|
||
|
|
|
||
|
|
cikeTunHistPeerIntIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The internal index of the local-remote peer
|
||
|
|
association. This internal index is used to
|
||
|
|
uniquely identify multiple associations between
|
||
|
|
the local and remote peer."
|
||
|
|
::= { cikeTunnelHistEntry 6 }
|
||
|
|
|
||
|
|
cikeTunHistPeerRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of remote peer identity. The remote
|
||
|
|
peer may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikeTunnelHistEntry 7 }
|
||
|
|
|
||
|
|
cikeTunHistPeerRemoteValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the remote peer identity.
|
||
|
|
|
||
|
|
If the remote peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the remote peer.
|
||
|
|
|
||
|
|
If the remote peer type is a host name, then this is
|
||
|
|
the host name used to identify the remote peer."
|
||
|
|
::= { cikeTunnelHistEntry 8 }
|
||
|
|
|
||
|
|
cikeTunHistLocalAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the local endpoint for the IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 9 }
|
||
|
|
|
||
|
|
cikeTunHistLocalName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the local IP address for
|
||
|
|
the IPsec Phase-1 IKE Tunnel. If the DNS
|
||
|
|
name associated with the local tunnel endpoint
|
||
|
|
is not known, then the value of this
|
||
|
|
object will be a NULL string."
|
||
|
|
::= { cikeTunnelHistEntry 10 }
|
||
|
|
|
||
|
|
cikeTunHistRemoteAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the remote endpoint for the IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 11 }
|
||
|
|
|
||
|
|
cikeTunHistRemoteName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the remote IP address of IPsec Phase-1
|
||
|
|
IKE Tunnel. If the DNS name associated with the remote
|
||
|
|
tunnel endpoint is not known, then the value of this
|
||
|
|
object will be a NULL string."
|
||
|
|
::= { cikeTunnelHistEntry 12 }
|
||
|
|
|
||
|
|
cikeTunHistNegoMode OBJECT-TYPE
|
||
|
|
SYNTAX IkeNegoMode
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiation mode of the IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 13 }
|
||
|
|
|
||
|
|
cikeTunHistDiffHellmanGrp OBJECT-TYPE
|
||
|
|
SYNTAX DiffHellmanGrp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelHistEntry 14 }
|
||
|
|
|
||
|
|
cikeTunHistEncryptAlgo OBJECT-TYPE
|
||
|
|
SYNTAX EncryptAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelHistEntry 15 }
|
||
|
|
|
||
|
|
cikeTunHistHashAlgo OBJECT-TYPE
|
||
|
|
SYNTAX IkeHashAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The hash algorithm used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelHistEntry 16 }
|
||
|
|
|
||
|
|
cikeTunHistAuthMethod OBJECT-TYPE
|
||
|
|
SYNTAX IkeAuthMethod
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication method used in IPsec Phase-1 IKE
|
||
|
|
negotiations."
|
||
|
|
::= { cikeTunnelHistEntry 17 }
|
||
|
|
|
||
|
|
cikeTunHistLifeTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel
|
||
|
|
in seconds."
|
||
|
|
::= { cikeTunnelHistEntry 18 }
|
||
|
|
|
||
|
|
cikeTunHistStartTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeStamp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime in hundredths of seconds
|
||
|
|
when the IPsec Phase-1 IKE tunnel was started."
|
||
|
|
::= { cikeTunnelHistEntry 19 }
|
||
|
|
|
||
|
|
cikeTunHistActiveTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time the IPsec Phase-1 IKE tunnel was been
|
||
|
|
active in hundredths of seconds."
|
||
|
|
::= { cikeTunnelHistEntry 20 }
|
||
|
|
|
||
|
|
cikeTunHistTotalRefreshes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "QM Exchanges"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security associations
|
||
|
|
refreshes performed."
|
||
|
|
::= { cikeTunnelHistEntry 21 }
|
||
|
|
|
||
|
|
cikeTunHistTotalSas OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security associations
|
||
|
|
used during the
|
||
|
|
life of the IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 22 }
|
||
|
|
|
||
|
|
cikeTunHistInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets
|
||
|
|
received by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 23 }
|
||
|
|
|
||
|
|
cikeTunHistInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received
|
||
|
|
by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 24 }
|
||
|
|
|
||
|
|
cikeTunHistInDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
by this IPsec Phase-1
|
||
|
|
IKE Tunnel during receive processing."
|
||
|
|
::= { cikeTunnelHistEntry 25 }
|
||
|
|
|
||
|
|
cikeTunHistInNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys received
|
||
|
|
by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 26 }
|
||
|
|
|
||
|
|
cikeTunHistInP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2
|
||
|
|
exchanges received by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 27 }
|
||
|
|
|
||
|
|
cikeTunHistInP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2
|
||
|
|
exchanges received and
|
||
|
|
found to be invalid by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 28 }
|
||
|
|
|
||
|
|
cikeTunHistInP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2
|
||
|
|
exchanges received and
|
||
|
|
rejected by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 29 }
|
||
|
|
|
||
|
|
cikeTunHistInP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 security association
|
||
|
|
delete requests received by this IPsec
|
||
|
|
Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 30 }
|
||
|
|
|
||
|
|
cikeTunHistOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 31 }
|
||
|
|
|
||
|
|
cikeTunHistOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 32 }
|
||
|
|
|
||
|
|
cikeTunHistOutDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
by this IPsec Phase-1
|
||
|
|
IKE Tunnel during send processing."
|
||
|
|
::= { cikeTunnelHistEntry 33 }
|
||
|
|
|
||
|
|
cikeTunHistOutNotifys OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of notifys sent by this IPsec Phase-1
|
||
|
|
IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 34 }
|
||
|
|
|
||
|
|
cikeTunHistOutP2Exchgs OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges sent by
|
||
|
|
this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 35 }
|
||
|
|
|
||
|
|
cikeTunHistOutP2ExchgInvalids OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges sent and
|
||
|
|
found to be invalid by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 36 }
|
||
|
|
|
||
|
|
cikeTunHistOutP2ExchgRejects OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SA Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 exchanges sent and
|
||
|
|
rejected by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 37 }
|
||
|
|
|
||
|
|
cikeTunHistOutP2SaDelRequests OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Notification Payloads"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of IPsec Phase-2 security association
|
||
|
|
delete requests sent by this IPsec Phase-1 IKE Tunnel."
|
||
|
|
::= { cikeTunnelHistEntry 38 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Tunnel History Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecTunnelHistTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecTunnelHistEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Tunnel History Table.
|
||
|
|
This table is implemented as a sliding
|
||
|
|
window in which only the
|
||
|
|
last n entries are maintained. The maximum number
|
||
|
|
of entries
|
||
|
|
is specified by the cipSecHistTableSize object."
|
||
|
|
::= { cipSecHistPhaseTwo 1 }
|
||
|
|
|
||
|
|
cipSecTunnelHistEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecTunnelHistEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated with
|
||
|
|
a previously active IPsec Phase-2 Tunnel."
|
||
|
|
INDEX { cipSecTunHistIndex }
|
||
|
|
::= { cipSecTunnelHistTable 1 }
|
||
|
|
|
||
|
|
CipSecTunnelHistEntry ::= SEQUENCE {
|
||
|
|
cipSecTunHistIndex Integer32,
|
||
|
|
cipSecTunHistTermReason INTEGER ,
|
||
|
|
cipSecTunHistActiveIndex Integer32,
|
||
|
|
cipSecTunHistIkeTunnelIndex Integer32,
|
||
|
|
cipSecTunHistLocalAddr IPSIpAddress,
|
||
|
|
cipSecTunHistRemoteAddr IPSIpAddress,
|
||
|
|
cipSecTunHistKeyType KeyType,
|
||
|
|
cipSecTunHistEncapMode EncapMode,
|
||
|
|
cipSecTunHistLifeSize Integer32,
|
||
|
|
cipSecTunHistLifeTime Integer32,
|
||
|
|
cipSecTunHistStartTime TimeStamp,
|
||
|
|
cipSecTunHistActiveTime TimeInterval,
|
||
|
|
cipSecTunHistTotalRefreshes Counter32,
|
||
|
|
cipSecTunHistTotalSas Counter32,
|
||
|
|
cipSecTunHistInSaDiffHellmanGrp DiffHellmanGrp,
|
||
|
|
cipSecTunHistInSaEncryptAlgo EncryptAlgo,
|
||
|
|
cipSecTunHistInSaAhAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunHistInSaEspAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunHistInSaDecompAlgo CompAlgo,
|
||
|
|
cipSecTunHistOutSaDiffHellmanGrp DiffHellmanGrp,
|
||
|
|
cipSecTunHistOutSaEncryptAlgo EncryptAlgo,
|
||
|
|
cipSecTunHistOutSaAhAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunHistOutSaEspAuthAlgo AuthAlgo,
|
||
|
|
cipSecTunHistOutSaCompAlgo CompAlgo,
|
||
|
|
cipSecTunHistInOctets Counter32,
|
||
|
|
cipSecTunHistHcInOctets Counter64,
|
||
|
|
cipSecTunHistInOctWraps Counter32,
|
||
|
|
cipSecTunHistInDecompOctets Counter32,
|
||
|
|
cipSecTunHistHcInDecompOctets Counter64,
|
||
|
|
cipSecTunHistInDecompOctWraps Counter32,
|
||
|
|
cipSecTunHistInPkts Counter32,
|
||
|
|
cipSecTunHistInDropPkts Counter32,
|
||
|
|
cipSecTunHistInReplayDropPkts Counter32,
|
||
|
|
cipSecTunHistInAuths Counter32,
|
||
|
|
cipSecTunHistInAuthFails Counter32,
|
||
|
|
cipSecTunHistInDecrypts Counter32,
|
||
|
|
cipSecTunHistInDecryptFails Counter32,
|
||
|
|
cipSecTunHistOutOctets Counter32,
|
||
|
|
cipSecTunHistHcOutOctets Counter64,
|
||
|
|
cipSecTunHistOutOctWraps Counter32,
|
||
|
|
cipSecTunHistOutUncompOctets Counter32,
|
||
|
|
cipSecTunHistHcOutUncompOctets Counter64,
|
||
|
|
cipSecTunHistOutUncompOctWraps Counter32,
|
||
|
|
cipSecTunHistOutPkts Counter32,
|
||
|
|
cipSecTunHistOutDropPkts Counter32,
|
||
|
|
cipSecTunHistOutAuths Counter32,
|
||
|
|
cipSecTunHistOutAuthFails Counter32,
|
||
|
|
cipSecTunHistOutEncrypts Counter32,
|
||
|
|
cipSecTunHistOutEncryptFails Counter32
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecTunHistIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the IPsec Phase-2 Tunnel History Table.
|
||
|
|
The value of the index is a number which
|
||
|
|
begins at one and is incremented with each tunnel
|
||
|
|
that ends. The value
|
||
|
|
of this object will wrap at 2,147,483,647."
|
||
|
|
::= { cipSecTunnelHistEntry 1 }
|
||
|
|
|
||
|
|
cipSecTunHistTermReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
normal(2),
|
||
|
|
operRequest(3),
|
||
|
|
peerDelRequest(4),
|
||
|
|
peerLost(5),
|
||
|
|
seqNumRollOver(6),
|
||
|
|
checkPointReq(7)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The reason the IPsec Phase-2 Tunnel was terminated.
|
||
|
|
Possible reasons include:
|
||
|
|
1 = other
|
||
|
|
2 = normal termination
|
||
|
|
3 = operator request
|
||
|
|
4 = peer delete request was received
|
||
|
|
5 = contact with peer was lost
|
||
|
|
6 = local failure occurred
|
||
|
|
7 = operator initiated check point request"
|
||
|
|
::= { cipSecTunnelHistEntry 2 }
|
||
|
|
|
||
|
|
cipSecTunHistActiveIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the previously active
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 3 }
|
||
|
|
|
||
|
|
cipSecTunHistIkeTunnelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the associated IPsec Phase-1 Tunnel
|
||
|
|
(cikeTunIndex in the cikeTunnelTable)."
|
||
|
|
::= { cipSecTunnelHistEntry 4 }
|
||
|
|
|
||
|
|
cipSecTunHistLocalAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the local endpoint for the IPsec
|
||
|
|
Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 5 }
|
||
|
|
|
||
|
|
cipSecTunHistRemoteAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the remote endpoint for the IPsec
|
||
|
|
Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 6 }
|
||
|
|
|
||
|
|
cipSecTunHistKeyType OBJECT-TYPE
|
||
|
|
SYNTAX KeyType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of key used by the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 7 }
|
||
|
|
|
||
|
|
cipSecTunHistEncapMode OBJECT-TYPE
|
||
|
|
SYNTAX EncapMode
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encapsulation mode used by the
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 8 }
|
||
|
|
|
||
|
|
cipSecTunHistLifeSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "KBytes"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiated LifeSize of the IPsec Phase-2 Tunnel in
|
||
|
|
kilobytes."
|
||
|
|
::= { cipSecTunnelHistEntry 9 }
|
||
|
|
|
||
|
|
cipSecTunHistLifeTime OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
UNITS "Seconds"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The negotiated LifeTime of the IPsec Phase-2 Tunnel in
|
||
|
|
seconds."
|
||
|
|
::= { cipSecTunnelHistEntry 10 }
|
||
|
|
|
||
|
|
cipSecTunHistStartTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeStamp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime in hundredths of seconds
|
||
|
|
when the IPsec Phase-2 Tunnel was started."
|
||
|
|
::= { cipSecTunnelHistEntry 11 }
|
||
|
|
|
||
|
|
cipSecTunHistActiveTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeInterval
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The length of time the IPsec Phase-2 Tunnel has been
|
||
|
|
active in hundredths of seconds."
|
||
|
|
::= { cipSecTunnelHistEntry 12 }
|
||
|
|
|
||
|
|
cipSecTunHistTotalRefreshes OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "QM Exchanges"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security association refreshes
|
||
|
|
performed."
|
||
|
|
::= { cipSecTunnelHistEntry 13 }
|
||
|
|
|
||
|
|
cipSecTunHistTotalSas OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "SAs"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of security associations used
|
||
|
|
during the
|
||
|
|
life of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 14 }
|
||
|
|
|
||
|
|
cipSecTunHistInSaDiffHellmanGrp OBJECT-TYPE
|
||
|
|
SYNTAX DiffHellmanGrp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used by the inbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 15 }
|
||
|
|
|
||
|
|
cipSecTunHistInSaEncryptAlgo OBJECT-TYPE
|
||
|
|
SYNTAX EncryptAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used by the inbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 16 }
|
||
|
|
|
||
|
|
cipSecTunHistInSaAhAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the inbound
|
||
|
|
authentication header (AH) security association of
|
||
|
|
the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 17 }
|
||
|
|
|
||
|
|
cipSecTunHistInSaEspAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the inbound
|
||
|
|
encapsulation security protocol (ESP)
|
||
|
|
security association of
|
||
|
|
the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 18 }
|
||
|
|
|
||
|
|
cipSecTunHistInSaDecompAlgo OBJECT-TYPE
|
||
|
|
SYNTAX CompAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The decompression algorithm used by the inbound
|
||
|
|
security association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 19 }
|
||
|
|
|
||
|
|
cipSecTunHistOutSaDiffHellmanGrp OBJECT-TYPE
|
||
|
|
SYNTAX DiffHellmanGrp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Diffie Hellman Group used by the outbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 20 }
|
||
|
|
|
||
|
|
cipSecTunHistOutSaEncryptAlgo OBJECT-TYPE
|
||
|
|
SYNTAX EncryptAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The encryption algorithm used by the outbound security
|
||
|
|
association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 21 }
|
||
|
|
|
||
|
|
cipSecTunHistOutSaAhAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the outbound
|
||
|
|
authentication header (AH) security association of
|
||
|
|
the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 22 }
|
||
|
|
|
||
|
|
cipSecTunHistOutSaEspAuthAlgo OBJECT-TYPE
|
||
|
|
SYNTAX AuthAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The authentication algorithm used by the inbound
|
||
|
|
encapsulation security protocol (ESP)
|
||
|
|
security association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 23 }
|
||
|
|
|
||
|
|
cipSecTunHistOutSaCompAlgo OBJECT-TYPE
|
||
|
|
SYNTAX CompAlgo
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compression algorithm used by the inbound
|
||
|
|
security association of the IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 24 }
|
||
|
|
|
||
|
|
cipSecTunHistInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets received by this IPsec
|
||
|
|
Phase-2 Tunnel. This value is accumulated
|
||
|
|
BEFORE determining whether or not the packet should
|
||
|
|
be decompressed. See also cipSecTunInOctWraps for
|
||
|
|
the number of times this counter has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 25 }
|
||
|
|
|
||
|
|
cipSecTunHistHcInOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of octets
|
||
|
|
received by this IPsec Phase-2 Tunnel. This value is
|
||
|
|
accumulated BEFORE determining whether or not
|
||
|
|
the packet should be decompressed."
|
||
|
|
::= { cipSecTunnelHistEntry 26 }
|
||
|
|
|
||
|
|
cipSecTunHistInOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the octets received counter
|
||
|
|
(cipSecTunInOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 27 }
|
||
|
|
|
||
|
|
cipSecTunHistInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of decompressed octets received by this
|
||
|
|
IPsec Phase-2 Tunnel. This value is accumulated AFTER
|
||
|
|
the packet is decompressed. If compression is not being
|
||
|
|
used, this value will match the value of cipSecTunHistInOctets.
|
||
|
|
See also cipSecTunInDecompOctWraps for the number of times
|
||
|
|
this counter has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 28 }
|
||
|
|
|
||
|
|
cipSecTunHistHcInDecompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of decompressed
|
||
|
|
octets received by this IPsec Phase-2 Tunnel. This value
|
||
|
|
is accumulated AFTER the packet is decompressed. If
|
||
|
|
compression is not being used, this value will match the
|
||
|
|
value of cipSecTunHistHcInOctets."
|
||
|
|
::= { cipSecTunnelHistEntry 29 }
|
||
|
|
|
||
|
|
cipSecTunHistInDecompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the decompressed octets
|
||
|
|
received counter (cipSecTunInDecompOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 30 }
|
||
|
|
|
||
|
|
cipSecTunHistInPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets received by this
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 31 }
|
||
|
|
|
||
|
|
cipSecTunHistInDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during
|
||
|
|
receive processing by this IPsec Phase-2 Tunnel.
|
||
|
|
This count does NOT include packets
|
||
|
|
dropped due to Anti-Replay processing."
|
||
|
|
::= { cipSecTunnelHistEntry 32 }
|
||
|
|
|
||
|
|
cipSecTunHistInReplayDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped during
|
||
|
|
receive processing due to Anti-Replay processing
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 33 }
|
||
|
|
|
||
|
|
cipSecTunHistInAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 34 }
|
||
|
|
|
||
|
|
cipSecTunHistInAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound authentication's
|
||
|
|
which ended in
|
||
|
|
failure by this IPsec Phase-2 Tunnel ."
|
||
|
|
::= { cipSecTunnelHistEntry 35 }
|
||
|
|
|
||
|
|
cipSecTunHistInDecrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 36 }
|
||
|
|
|
||
|
|
cipSecTunHistInDecryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of inbound decryption's
|
||
|
|
which ended in failure
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 37 }
|
||
|
|
|
||
|
|
cipSecTunHistOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of octets sent by this IPsec
|
||
|
|
Phase-2 Tunnel. This value is accumulated
|
||
|
|
AFTER determining whether or not the
|
||
|
|
packet should be
|
||
|
|
compressed. See also cipSecTunOutOctWraps for the
|
||
|
|
number of times this counter has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 38 }
|
||
|
|
|
||
|
|
cipSecTunHistHcOutOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total number of octets
|
||
|
|
sent by this IPsec Phase-2 Tunnel. This value
|
||
|
|
is accumulated AFTER determining whether or not
|
||
|
|
the packet should be
|
||
|
|
compressed."
|
||
|
|
::= { cipSecTunnelHistEntry 39 }
|
||
|
|
|
||
|
|
cipSecTunHistOutOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the octets sent counter
|
||
|
|
(cipSecTunOutOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 40 }
|
||
|
|
|
||
|
|
cipSecTunHistOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of uncompressed octets sent by this
|
||
|
|
IPsec Phase-2 Tunnel. This value is accumulated BEFORE
|
||
|
|
the packet is compressed. If compression is not being
|
||
|
|
used, this value will match the value of
|
||
|
|
cipSecTunHistOutOctets. See also
|
||
|
|
cipSecTunOutDecompOctWraps for the number of times
|
||
|
|
this counter has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 41 }
|
||
|
|
|
||
|
|
cipSecTunHistHcOutUncompOctets OBJECT-TYPE
|
||
|
|
SYNTAX Counter64
|
||
|
|
UNITS "Octets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A high capacity count of the total
|
||
|
|
number of uncompressed octets sent by this
|
||
|
|
IPsec Phase-2 Tunnel. This value is accumulated
|
||
|
|
BEFORE the packet is compressed. If compression
|
||
|
|
is not being used, this value will match the value of
|
||
|
|
cipSecTunHistHcOutOctets."
|
||
|
|
::= { cipSecTunnelHistEntry 42 }
|
||
|
|
|
||
|
|
cipSecTunHistOutUncompOctWraps OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Integral units"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of times the uncompressed octets sent counter
|
||
|
|
(cipSecTunOutUncompOctets) has wrapped."
|
||
|
|
::= { cipSecTunnelHistEntry 43 }
|
||
|
|
|
||
|
|
cipSecTunHistOutPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets sent by this
|
||
|
|
IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 44 }
|
||
|
|
|
||
|
|
cipSecTunHistOutDropPkts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of packets dropped
|
||
|
|
during send processing
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 45 }
|
||
|
|
|
||
|
|
cipSecTunHistOutAuths OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Events"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 46 }
|
||
|
|
|
||
|
|
cipSecTunHistOutAuthFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound authentication's
|
||
|
|
which ended in
|
||
|
|
failure by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 47 }
|
||
|
|
|
||
|
|
cipSecTunHistOutEncrypts OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Packets"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's performed
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 48 }
|
||
|
|
|
||
|
|
cipSecTunHistOutEncryptFails OBJECT-TYPE
|
||
|
|
SYNTAX Counter32
|
||
|
|
UNITS "Failures"
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The total number of outbound encryption's
|
||
|
|
which ended in failure
|
||
|
|
by this IPsec Phase-2 Tunnel."
|
||
|
|
::= { cipSecTunnelHistEntry 49 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Tunnel Endpoint History Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecEndPtHistTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecEndPtHistEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Tunnel Endpoint History Table.
|
||
|
|
This table is implemented as a
|
||
|
|
sliding window in which only the
|
||
|
|
last n entries are maintained.
|
||
|
|
The maximum number of entries
|
||
|
|
is specified by the cipSecHistTableSize object."
|
||
|
|
::= { cipSecHistPhaseTwo 2 }
|
||
|
|
|
||
|
|
cipSecEndPtHistEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecEndPtHistEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated with
|
||
|
|
a previously active IPsec Phase-2 Tunnel Endpoint."
|
||
|
|
INDEX { cipSecEndPtHistIndex }
|
||
|
|
::= { cipSecEndPtHistTable 1 }
|
||
|
|
|
||
|
|
CipSecEndPtHistEntry ::= SEQUENCE {
|
||
|
|
cipSecEndPtHistIndex Integer32,
|
||
|
|
cipSecEndPtHistTunIndex Integer32,
|
||
|
|
cipSecEndPtHistActiveIndex Integer32,
|
||
|
|
cipSecEndPtHistLocalName DisplayString,
|
||
|
|
cipSecEndPtHistLocalType EndPtType,
|
||
|
|
cipSecEndPtHistLocalAddr1 IPSIpAddress,
|
||
|
|
cipSecEndPtHistLocalAddr2 IPSIpAddress,
|
||
|
|
cipSecEndPtHistLocalProtocol Integer32,
|
||
|
|
cipSecEndPtHistLocalPort Integer32,
|
||
|
|
cipSecEndPtHistRemoteName DisplayString,
|
||
|
|
cipSecEndPtHistRemoteType EndPtType,
|
||
|
|
cipSecEndPtHistRemoteAddr1 IPSIpAddress,
|
||
|
|
cipSecEndPtHistRemoteAddr2 IPSIpAddress,
|
||
|
|
cipSecEndPtHistRemoteProtocol Integer32,
|
||
|
|
cipSecEndPtHistRemotePort Integer32
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecEndPtHistIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The number of the previously active
|
||
|
|
Endpoint associated
|
||
|
|
with a IPsec Phase-2 Tunnel Table. The value
|
||
|
|
of this index is a number which begins at
|
||
|
|
one and is incremented with each Endpoint
|
||
|
|
associated with an IPsec Phase-2 Tunnel.
|
||
|
|
The value of this object will wrap at 2,147,483,647."
|
||
|
|
::= { cipSecEndPtHistEntry 1 }
|
||
|
|
|
||
|
|
cipSecEndPtHistTunIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the previously active IPsec
|
||
|
|
Phase-2 Tunnel Table."
|
||
|
|
::= { cipSecEndPtHistEntry 2 }
|
||
|
|
|
||
|
|
cipSecEndPtHistActiveIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The index of the previously active Endpoint."
|
||
|
|
::= { cipSecEndPtHistEntry 3 }
|
||
|
|
|
||
|
|
cipSecEndPtHistLocalName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the local Endpoint."
|
||
|
|
::= { cipSecEndPtHistEntry 4 }
|
||
|
|
|
||
|
|
cipSecEndPtHistLocalType OBJECT-TYPE
|
||
|
|
SYNTAX EndPtType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of identity for the local Endpoint.
|
||
|
|
Possible values are:
|
||
|
|
1) a single IP address, or
|
||
|
|
2) an IP address range, or
|
||
|
|
3) an IP subnet."
|
||
|
|
::= { cipSecEndPtHistEntry 5 }
|
||
|
|
|
||
|
|
cipSecEndPtHistLocalAddr1 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local Endpoint's first IP address specification.
|
||
|
|
|
||
|
|
If the local Endpoint type is single IP address,
|
||
|
|
then this is the value of the IP address.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP address range,
|
||
|
|
then this is the value of beginning IP address of
|
||
|
|
the range."
|
||
|
|
::= { cipSecEndPtHistEntry 6 }
|
||
|
|
|
||
|
|
cipSecEndPtHistLocalAddr2 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The local Endpoint's second IP address specification.
|
||
|
|
|
||
|
|
If the local Endpoint type is single IP address,
|
||
|
|
then this is the value of the IP address.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet mask.
|
||
|
|
|
||
|
|
If the local Endpoint type is IP address range,
|
||
|
|
then this
|
||
|
|
is the value of ending IP address of the range."
|
||
|
|
::= { cipSecEndPtHistEntry 7 }
|
||
|
|
|
||
|
|
cipSecEndPtHistLocalProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The protocol number of the local Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtHistEntry 8 }
|
||
|
|
|
||
|
|
cipSecEndPtHistLocalPort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the local Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtHistEntry 9 }
|
||
|
|
|
||
|
|
cipSecEndPtHistRemoteName OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The DNS name of the remote Endpoint."
|
||
|
|
::= { cipSecEndPtHistEntry 10 }
|
||
|
|
|
||
|
|
cipSecEndPtHistRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX EndPtType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of identity for the remote Endpoint.
|
||
|
|
Possible values are:
|
||
|
|
1) a single IP address, or
|
||
|
|
2) an IP address range, or
|
||
|
|
3) an IP subnet."
|
||
|
|
::= { cipSecEndPtHistEntry 11 }
|
||
|
|
|
||
|
|
cipSecEndPtHistRemoteAddr1 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remote Endpoint's first IP address specification.
|
||
|
|
|
||
|
|
If the remote Endpoint type is single IP address,
|
||
|
|
then this
|
||
|
|
is the value of the IP address.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP address range,
|
||
|
|
then this
|
||
|
|
is the value of beginning IP address of the range."
|
||
|
|
::= { cipSecEndPtHistEntry 12 }
|
||
|
|
|
||
|
|
cipSecEndPtHistRemoteAddr2 OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The remote Endpoint's second IP address specification.
|
||
|
|
|
||
|
|
If the remote Endpoint type is single IP address,
|
||
|
|
then this
|
||
|
|
is the value of the IP address.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP subnet, then this
|
||
|
|
is the value of the subnet mask.
|
||
|
|
|
||
|
|
If the remote Endpoint type is IP address range,
|
||
|
|
then this
|
||
|
|
is the value of ending IP address of the range."
|
||
|
|
::= { cipSecEndPtHistEntry 13 }
|
||
|
|
|
||
|
|
cipSecEndPtHistRemoteProtocol OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..255 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The protocol number of the remote Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtHistEntry 14 }
|
||
|
|
|
||
|
|
cipSecEndPtHistRemotePort OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..65535 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The port number of the remote Endpoint's traffic."
|
||
|
|
::= { cipSecEndPtHistEntry 15 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Failure Group
|
||
|
|
--
|
||
|
|
-- This group consists of a:
|
||
|
|
-- 1) IPsec Failure Global Objects
|
||
|
|
-- 2) IPsec Phase-1 Tunnel Failure Table
|
||
|
|
-- 3) IPsec Phase-2 Tunnel Failure Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecFailGlobal OBJECT IDENTIFIER
|
||
|
|
::= { cipSecFailures 1 }
|
||
|
|
|
||
|
|
cipSecFailPhaseOne OBJECT IDENTIFIER
|
||
|
|
::= { cipSecFailures 2 }
|
||
|
|
|
||
|
|
cipSecFailPhaseTwo OBJECT IDENTIFIER
|
||
|
|
::= { cipSecFailures 3 }
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Failure Global Control Objects
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecFailGlobalCntl OBJECT IDENTIFIER
|
||
|
|
::= { cipSecFailGlobal 1 }
|
||
|
|
|
||
|
|
|
||
|
|
cipSecFailTableSize OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The window size of the IPsec Phase-1 and Phase-2
|
||
|
|
Failure Tables.
|
||
|
|
|
||
|
|
The IPsec Phase-1 and Phase-2 Failure Tables are
|
||
|
|
implemented as a sliding window in which only the
|
||
|
|
last n entries are maintained. This object is used
|
||
|
|
specify the number of entries which will be
|
||
|
|
maintained in the IPsec Phase-1 and Phase-2 Failure
|
||
|
|
Tables.
|
||
|
|
|
||
|
|
An implementation may choose suitable minimum and
|
||
|
|
maximum values for this element based on the local
|
||
|
|
policy and available resources. If an SNMP SET request
|
||
|
|
specifies a value outside this window for this element,
|
||
|
|
a BAD VALUE may be returned."
|
||
|
|
::= { cipSecFailGlobalCntl 1 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-1 Failure Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cikeFailTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CikeFailEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 Failure Table.
|
||
|
|
This table is implemented as a sliding
|
||
|
|
window in which only the last n entries are
|
||
|
|
maintained. The maximum number of entries
|
||
|
|
is specified by the cipSecFailTableSize object."
|
||
|
|
::= { cipSecFailPhaseOne 1 }
|
||
|
|
|
||
|
|
cikeFailEntry OBJECT-TYPE
|
||
|
|
SYNTAX CikeFailEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated
|
||
|
|
with
|
||
|
|
an IPsec Phase-1 failure."
|
||
|
|
INDEX { cikeFailIndex }
|
||
|
|
::= { cikeFailTable 1 }
|
||
|
|
|
||
|
|
CikeFailEntry ::= SEQUENCE {
|
||
|
|
cikeFailIndex Integer32,
|
||
|
|
cikeFailReason INTEGER ,
|
||
|
|
cikeFailTime TimeStamp,
|
||
|
|
cikeFailLocalType IkePeerType,
|
||
|
|
cikeFailLocalValue DisplayString,
|
||
|
|
cikeFailRemoteType IkePeerType,
|
||
|
|
cikeFailRemoteValue DisplayString,
|
||
|
|
cikeFailLocalAddr IPSIpAddress,
|
||
|
|
cikeFailRemoteAddr IPSIpAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
cikeFailIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-1 Failure Table index.
|
||
|
|
The value of the index is a number which
|
||
|
|
begins at one and is incremented with each
|
||
|
|
IPsec Phase-1 failure. The value
|
||
|
|
of this object will wrap at 2,147,483,647."
|
||
|
|
::= { cikeFailEntry 1 }
|
||
|
|
|
||
|
|
cikeFailReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
peerDelRequest(2),
|
||
|
|
peerLost(3),
|
||
|
|
localFailure(4),
|
||
|
|
authFailure(5),
|
||
|
|
hashValidation(6),
|
||
|
|
encryptFailure(7),
|
||
|
|
internalError(8),
|
||
|
|
sysCapExceeded(9),
|
||
|
|
proposalFailure(10),
|
||
|
|
peerCertUnavailable(11),
|
||
|
|
peerCertNotValid(12),
|
||
|
|
localCertExpired(13),
|
||
|
|
crlFailure(14),
|
||
|
|
peerEncodingError(15),
|
||
|
|
nonExistentSa(16),
|
||
|
|
operRequest(17)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The reason for the failure. Possible reasons include:
|
||
|
|
1 = other
|
||
|
|
2 = peer delete request was received
|
||
|
|
3 = contact with peer was lost
|
||
|
|
4 = local failure occurred
|
||
|
|
5 = authentication failure
|
||
|
|
6 = hash validation failure
|
||
|
|
7 = encryption failure
|
||
|
|
8 = internal error occurred
|
||
|
|
9 = system capacity failure
|
||
|
|
10 = proposal failure
|
||
|
|
11 = peer's certificate is unavailable
|
||
|
|
12 = peer's certificate was found invalid
|
||
|
|
13 = local certificate expired
|
||
|
|
14 = certificate revoke list (crl) failure
|
||
|
|
15 = peer encoding error
|
||
|
|
16 = non-existent security association
|
||
|
|
17 = operator requested termination."
|
||
|
|
::= { cikeFailEntry 2 }
|
||
|
|
|
||
|
|
cikeFailTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeStamp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime in hundredths of seconds
|
||
|
|
at the time of the failure."
|
||
|
|
::= { cikeFailEntry 3 }
|
||
|
|
|
||
|
|
cikeFailLocalType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of local peer identity. The local peer
|
||
|
|
may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikeFailEntry 4 }
|
||
|
|
|
||
|
|
cikeFailLocalValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the local peer identity.
|
||
|
|
|
||
|
|
If the local peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the local peer.
|
||
|
|
|
||
|
|
If the local peer type is a host name, then this is
|
||
|
|
the host name used to identify the local peer."
|
||
|
|
::= { cikeFailEntry 5 }
|
||
|
|
|
||
|
|
cikeFailRemoteType OBJECT-TYPE
|
||
|
|
SYNTAX IkePeerType
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The type of remote peer identity. The remote
|
||
|
|
peer may be identified by:
|
||
|
|
1. an IP address, or
|
||
|
|
2. a host name."
|
||
|
|
::= { cikeFailEntry 6 }
|
||
|
|
|
||
|
|
cikeFailRemoteValue OBJECT-TYPE
|
||
|
|
SYNTAX DisplayString
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of the remote peer identity.
|
||
|
|
|
||
|
|
If the remote peer type is an IP Address, then this
|
||
|
|
is the IP Address used to identify the remote peer.
|
||
|
|
|
||
|
|
If the remote peer type is a host name, then this is
|
||
|
|
the host name used to identify the remote peer."
|
||
|
|
::= { cikeFailEntry 7 }
|
||
|
|
|
||
|
|
cikeFailLocalAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the local peer."
|
||
|
|
::= { cikeFailEntry 8 }
|
||
|
|
|
||
|
|
cikeFailRemoteAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IP address of the remote peer."
|
||
|
|
::= { cikeFailEntry 9 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec Phase-2 Failure Table
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecFailTable OBJECT-TYPE
|
||
|
|
SYNTAX SEQUENCE OF CipSecFailEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Failure Table.
|
||
|
|
This table is implemented as a sliding window
|
||
|
|
in which only the last n entries are maintained.
|
||
|
|
The maximum number of entries
|
||
|
|
is specified by the cipSecFailTableSize object."
|
||
|
|
::= { cipSecFailPhaseTwo 1 }
|
||
|
|
|
||
|
|
cipSecFailEntry OBJECT-TYPE
|
||
|
|
SYNTAX CipSecFailEntry
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each entry contains the attributes associated with
|
||
|
|
an IPsec Phase-1 failure."
|
||
|
|
INDEX { cipSecFailIndex }
|
||
|
|
::= { cipSecFailTable 1 }
|
||
|
|
|
||
|
|
CipSecFailEntry ::= SEQUENCE {
|
||
|
|
cipSecFailIndex Integer32,
|
||
|
|
cipSecFailReason INTEGER ,
|
||
|
|
cipSecFailTime TimeStamp,
|
||
|
|
cipSecFailTunnelIndex Integer32,
|
||
|
|
cipSecFailSaSpi Integer32,
|
||
|
|
cipSecFailPktSrcAddr IPSIpAddress,
|
||
|
|
cipSecFailPktDstAddr IPSIpAddress
|
||
|
|
}
|
||
|
|
|
||
|
|
cipSecFailIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS not-accessible
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The IPsec Phase-2 Failure Table index.
|
||
|
|
The value of the index is a number which
|
||
|
|
begins at one and is incremented with each
|
||
|
|
IPsec Phase-1 failure. The value
|
||
|
|
of this object will wrap at 2,147,483,647."
|
||
|
|
::= { cipSecFailEntry 1 }
|
||
|
|
|
||
|
|
cipSecFailReason OBJECT-TYPE
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
other(1),
|
||
|
|
internalError(2),
|
||
|
|
peerEncodingError(3),
|
||
|
|
proposalFailure(4),
|
||
|
|
protocolUseFail(5),
|
||
|
|
nonExistentSa(6),
|
||
|
|
decryptFailure(7),
|
||
|
|
encryptFailure(8),
|
||
|
|
inAuthFailure(9),
|
||
|
|
outAuthFailure(10),
|
||
|
|
compression(11),
|
||
|
|
sysCapExceeded(12),
|
||
|
|
peerDelRequest(13),
|
||
|
|
peerLost(14),
|
||
|
|
seqNumRollOver(15),
|
||
|
|
operRequest(16)
|
||
|
|
}
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The reason for the failure. Possible reasons
|
||
|
|
include:
|
||
|
|
1 = other
|
||
|
|
2 = internal error occurred
|
||
|
|
3 = peer encoding error
|
||
|
|
4 = proposal failure
|
||
|
|
5 = protocol use failure
|
||
|
|
6 = non-existent security association
|
||
|
|
7 = decryption failure
|
||
|
|
8 = encryption failure
|
||
|
|
9 = inbound authentication failure
|
||
|
|
10 = outbound authentication failure
|
||
|
|
11 = compression failure
|
||
|
|
12 = system capacity failure
|
||
|
|
13 = peer delete request was received
|
||
|
|
14 = contact with peer was lost
|
||
|
|
15 = sequence number rolled over
|
||
|
|
16 = operator requested termination."
|
||
|
|
::= { cipSecFailEntry 2 }
|
||
|
|
|
||
|
|
cipSecFailTime OBJECT-TYPE
|
||
|
|
SYNTAX TimeStamp
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The value of sysUpTime in hundredths of seconds
|
||
|
|
at the time of the failure."
|
||
|
|
::= { cipSecFailEntry 3 }
|
||
|
|
|
||
|
|
cipSecFailTunnelIndex OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (1..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The Phase-2 Tunnel index (cipSecTunIndex)."
|
||
|
|
::= { cipSecFailEntry 4 }
|
||
|
|
|
||
|
|
cipSecFailSaSpi OBJECT-TYPE
|
||
|
|
SYNTAX Integer32 (0..2147483647 )
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The security association SPI value."
|
||
|
|
::= { cipSecFailEntry 5 }
|
||
|
|
|
||
|
|
cipSecFailPktSrcAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The packet's source IP address."
|
||
|
|
::= { cipSecFailEntry 6 }
|
||
|
|
|
||
|
|
cipSecFailPktDstAddr OBJECT-TYPE
|
||
|
|
SYNTAX IPSIpAddress
|
||
|
|
MAX-ACCESS read-only
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The packet's destination IP address."
|
||
|
|
::= { cipSecFailEntry 7 }
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- The IPsec TRAP Control Group
|
||
|
|
--
|
||
|
|
-- This group of objects controls the sending of IPsec TRAPs.
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecTrapCntlIkeTunnelStart OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state of
|
||
|
|
sending the IPsec IKE Phase-1 Tunnel Start TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 1 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIkeTunnelStop OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the
|
||
|
|
IPsec IKE Phase-1 Tunnel Stop TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 2 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIkeSysFailure OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the
|
||
|
|
IPsec IKE Phase-1 System Failure TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 3 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIkeCertCrlFailure OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative
|
||
|
|
state of sending the
|
||
|
|
IPsec IKE Phase-1 Certificate/CRL Failure TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 4 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIkeProtocolFail OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative
|
||
|
|
state of sending the
|
||
|
|
IPsec IKE Phase-1 Protocol Failure TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 5 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIkeNoSa OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative
|
||
|
|
state of sending the
|
||
|
|
IPsec IKE Phase-1 No Security Association TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 6 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecTunnelStart OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the IPsec
|
||
|
|
Phase-2 Tunnel Start TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 7 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecTunnelStop OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative
|
||
|
|
state of sending the IPsec
|
||
|
|
Phase-2 Tunnel Stop TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 8 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecSysFailure OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the IPsec
|
||
|
|
Phase-2 System Failure TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 9 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecSetUpFailure OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the IPsec
|
||
|
|
Phase-2 Set Up Failure TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 10 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecEarlyTunTerm OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the IPsec
|
||
|
|
Phase-2 Early Tunnel Termination TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 11 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecProtocolFail OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the IPsec
|
||
|
|
Phase-2 Protocol Failure TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 12 }
|
||
|
|
|
||
|
|
cipSecTrapCntlIpSecNoSa OBJECT-TYPE
|
||
|
|
SYNTAX TrapStatus
|
||
|
|
MAX-ACCESS read-write
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This object defines the administrative state
|
||
|
|
of sending the IPsec
|
||
|
|
Phase-2 No Security Association TRAP"
|
||
|
|
DEFVAL { disabled }
|
||
|
|
::= { cipSecTrapCntl 13 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- IPsec Notifications - TRAPs
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecMIBNotificationPrefix OBJECT IDENTIFIER
|
||
|
|
::= { ciscoIpSecFlowMonitorMIB 2 }
|
||
|
|
|
||
|
|
cipSecMIBNotifications OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBNotificationPrefix 0 }
|
||
|
|
|
||
|
|
|
||
|
|
cikeTunnelStart NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr,
|
||
|
|
cikeTunLifeTime
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when an IPsec Phase-1
|
||
|
|
IKE Tunnel becomes active."
|
||
|
|
::= { cipSecMIBNotifications 1 }
|
||
|
|
|
||
|
|
cikeTunnelStop NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr,
|
||
|
|
cikeTunActiveTime
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when an IPsec Phase-1
|
||
|
|
IKE Tunnel becomes inactive."
|
||
|
|
::= { cipSecMIBNotifications 2 }
|
||
|
|
|
||
|
|
cikeSysFailure NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-1 IKE Tunnel experiences an internal
|
||
|
|
or system capacity error."
|
||
|
|
::= { cipSecMIBNotifications 3 }
|
||
|
|
|
||
|
|
cikeCertCrlFailure NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-1 IKE Tunnel experiences a Certificate
|
||
|
|
or a Certificate Revoke List (CRL) related error."
|
||
|
|
::= { cipSecMIBNotifications 4 }
|
||
|
|
|
||
|
|
cikeProtocolFailure NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-1 IKE Tunnel experiences a protocol
|
||
|
|
related error."
|
||
|
|
::= { cipSecMIBNotifications 5 }
|
||
|
|
|
||
|
|
cikeNoSa NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-1 IKE Tunnel experiences a non-existent
|
||
|
|
security association error."
|
||
|
|
::= { cipSecMIBNotifications 6 }
|
||
|
|
|
||
|
|
cipSecTunnelStart NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cipSecTunLifeTime,
|
||
|
|
cipSecTunLifeSize
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when an IPsec Phase-2
|
||
|
|
Tunnel becomes active."
|
||
|
|
::= { cipSecMIBNotifications 7 }
|
||
|
|
|
||
|
|
cipSecTunnelStop NOTIFICATION-TYPE
|
||
|
|
OBJECTS { cipSecTunActiveTime }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when an IPsec Phase-2
|
||
|
|
Tunnel becomes inactive."
|
||
|
|
::= { cipSecMIBNotifications 8 }
|
||
|
|
|
||
|
|
cipSecSysFailure NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr,
|
||
|
|
cipSecTunActiveTime,
|
||
|
|
cipSecSpiProtocol
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-2 Tunnel experiences an internal
|
||
|
|
or system capacity error."
|
||
|
|
::= { cipSecMIBNotifications 9 }
|
||
|
|
|
||
|
|
cipSecSetUpFailure NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the setup for
|
||
|
|
an IPsec Phase-2 Tunnel fails."
|
||
|
|
::= { cipSecMIBNotifications 10 }
|
||
|
|
|
||
|
|
cipSecEarlyTunTerm NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cipSecTunActiveTime,
|
||
|
|
cipSecSpiProtocol
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when an an IPsec Phase-2
|
||
|
|
Tunnel is terminated earily or before expected."
|
||
|
|
::= { cipSecMIBNotifications 11 }
|
||
|
|
|
||
|
|
cipSecProtocolFailure NOTIFICATION-TYPE
|
||
|
|
OBJECTS {
|
||
|
|
cipSecTunActiveTime,
|
||
|
|
cipSecSpiProtocol
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-2 Tunnel experiences a protocol
|
||
|
|
related error."
|
||
|
|
::= { cipSecMIBNotifications 12 }
|
||
|
|
|
||
|
|
cipSecNoSa NOTIFICATION-TYPE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This notification is generated when the processing for
|
||
|
|
an IPsec Phase-2 Tunnel experiences a non-existent
|
||
|
|
security association error."
|
||
|
|
::= { cipSecMIBNotifications 13 }
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- Conformance Information
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecMIBConformance OBJECT IDENTIFIER
|
||
|
|
::= { ciscoIpSecFlowMonitorMIB 3 }
|
||
|
|
|
||
|
|
cipSecMIBGroups OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBConformance 1 }
|
||
|
|
|
||
|
|
cipSecMIBCompliances OBJECT IDENTIFIER
|
||
|
|
::= { cipSecMIBConformance 2 }
|
||
|
|
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- Compliance Statements
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecMIBCompliance MODULE-COMPLIANCE
|
||
|
|
STATUS deprecated
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for SNMP entities
|
||
|
|
the IP Security Protocol.
|
||
|
|
This has been replaced by cipSecMIBComplianceRev1."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
cipSecLevelsGroup,
|
||
|
|
cipSecPhaseOneGroup,
|
||
|
|
cipSecPhaseTwoGroup
|
||
|
|
}
|
||
|
|
|
||
|
|
OBJECT cikeTunStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
|
||
|
|
OBJECT cipSecTunStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
::= { cipSecMIBCompliances 1 }
|
||
|
|
|
||
|
|
cipSecMIBComplianceRev1 MODULE-COMPLIANCE
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The compliance statement for SNMP entities
|
||
|
|
the IP Security Protocol."
|
||
|
|
MODULE -- this module
|
||
|
|
MANDATORY-GROUPS {
|
||
|
|
cipSecLevelsGroup,
|
||
|
|
cipSecPhaseOneGroup,
|
||
|
|
cipSecPhaseTwoGroup
|
||
|
|
}
|
||
|
|
|
||
|
|
GROUP cipSecGWStatsGroup
|
||
|
|
DESCRIPTION
|
||
|
|
"Implementation of this group is for the
|
||
|
|
gateway supporting IPSec statistics
|
||
|
|
information."
|
||
|
|
|
||
|
|
OBJECT cikeTunStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
|
||
|
|
OBJECT cipSecTunStatus
|
||
|
|
MIN-ACCESS read-only
|
||
|
|
DESCRIPTION
|
||
|
|
"Write access is not required."
|
||
|
|
::= { cipSecMIBCompliances 2 }
|
||
|
|
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
-- Units of Conformance
|
||
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||
|
|
|
||
|
|
cipSecLevelsGroup OBJECT-GROUP
|
||
|
|
OBJECTS { cipSecMibLevel }
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group consists of a:
|
||
|
|
1) IPsec MIB Level"
|
||
|
|
::= { cipSecMIBGroups 1 }
|
||
|
|
|
||
|
|
cipSecPhaseOneGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cikeGlobalActiveTunnels,
|
||
|
|
cikeGlobalPreviousTunnels,
|
||
|
|
cikeGlobalInOctets,
|
||
|
|
cikeGlobalInPkts,
|
||
|
|
cikeGlobalInDropPkts,
|
||
|
|
cikeGlobalInNotifys,
|
||
|
|
cikeGlobalInP2Exchgs,
|
||
|
|
cikeGlobalInP2ExchgInvalids,
|
||
|
|
cikeGlobalInP2ExchgRejects,
|
||
|
|
cikeGlobalInP2SaDelRequests,
|
||
|
|
cikeGlobalOutOctets,
|
||
|
|
cikeGlobalOutPkts,
|
||
|
|
cikeGlobalOutDropPkts,
|
||
|
|
cikeGlobalOutNotifys,
|
||
|
|
cikeGlobalOutP2Exchgs,
|
||
|
|
cikeGlobalOutP2ExchgInvalids,
|
||
|
|
cikeGlobalOutP2ExchgRejects,
|
||
|
|
cikeGlobalOutP2SaDelRequests,
|
||
|
|
cikeGlobalInitTunnels,
|
||
|
|
cikeGlobalInitTunnelFails,
|
||
|
|
cikeGlobalRespTunnelFails,
|
||
|
|
cikeGlobalSysCapFails,
|
||
|
|
cikeGlobalAuthFails,
|
||
|
|
cikeGlobalDecryptFails,
|
||
|
|
cikeGlobalHashValidFails,
|
||
|
|
cikeGlobalNoSaFails,
|
||
|
|
cikePeerLocalAddr,
|
||
|
|
cikePeerRemoteAddr,
|
||
|
|
cikePeerActiveTime,
|
||
|
|
cikePeerActiveTunnelIndex,
|
||
|
|
cikeTunLocalType,
|
||
|
|
cikeTunLocalValue,
|
||
|
|
cikeTunLocalAddr,
|
||
|
|
cikeTunLocalName,
|
||
|
|
cikeTunRemoteType,
|
||
|
|
cikeTunRemoteValue,
|
||
|
|
cikeTunRemoteAddr,
|
||
|
|
cikeTunRemoteName,
|
||
|
|
cikeTunNegoMode,
|
||
|
|
cikeTunDiffHellmanGrp,
|
||
|
|
cikeTunEncryptAlgo,
|
||
|
|
cikeTunHashAlgo,
|
||
|
|
cikeTunAuthMethod,
|
||
|
|
cikeTunLifeTime,
|
||
|
|
cikeTunActiveTime,
|
||
|
|
cikeTunSaRefreshThreshold,
|
||
|
|
cikeTunTotalRefreshes,
|
||
|
|
cikeTunInOctets,
|
||
|
|
cikeTunInPkts,
|
||
|
|
cikeTunInDropPkts,
|
||
|
|
cikeTunInNotifys,
|
||
|
|
cikeTunInP2Exchgs,
|
||
|
|
cikeTunInP2ExchgInvalids,
|
||
|
|
cikeTunInP2ExchgRejects,
|
||
|
|
cikeTunInP2SaDelRequests,
|
||
|
|
cikeTunOutOctets,
|
||
|
|
cikeTunOutPkts,
|
||
|
|
cikeTunOutDropPkts,
|
||
|
|
cikeTunOutNotifys,
|
||
|
|
cikeTunOutP2Exchgs,
|
||
|
|
cikeTunOutP2ExchgInvalids,
|
||
|
|
cikeTunOutP2ExchgRejects,
|
||
|
|
cikeTunOutP2SaDelRequests,
|
||
|
|
cikeTunStatus,
|
||
|
|
cikePeerCorrIpSecTunIndex
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group consists of:
|
||
|
|
1) IPsec Phase-1 Global Objects
|
||
|
|
2) IPsec Phase-1 Peer Table
|
||
|
|
3) IPsec Phase-1 Tunnel Table
|
||
|
|
4) IPsec Phase-1 Correlation Table"
|
||
|
|
::= { cipSecMIBGroups 2 }
|
||
|
|
|
||
|
|
cipSecPhaseTwoGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cipSecGlobalActiveTunnels,
|
||
|
|
cipSecGlobalPreviousTunnels,
|
||
|
|
cipSecGlobalInOctets,
|
||
|
|
cipSecGlobalHcInOctets,
|
||
|
|
cipSecGlobalInOctWraps,
|
||
|
|
cipSecGlobalInDecompOctets,
|
||
|
|
cipSecGlobalHcInDecompOctets,
|
||
|
|
cipSecGlobalInDecompOctWraps,
|
||
|
|
cipSecGlobalInPkts,
|
||
|
|
cipSecGlobalInDrops,
|
||
|
|
cipSecGlobalInReplayDrops,
|
||
|
|
cipSecGlobalInAuths,
|
||
|
|
cipSecGlobalInAuthFails,
|
||
|
|
cipSecGlobalInDecrypts,
|
||
|
|
cipSecGlobalInDecryptFails,
|
||
|
|
cipSecGlobalOutOctets,
|
||
|
|
cipSecGlobalHcOutOctets,
|
||
|
|
cipSecGlobalOutOctWraps,
|
||
|
|
cipSecGlobalOutUncompOctets,
|
||
|
|
cipSecGlobalHcOutUncompOctets,
|
||
|
|
cipSecGlobalOutUncompOctWraps,
|
||
|
|
cipSecGlobalOutPkts,
|
||
|
|
cipSecGlobalOutDrops,
|
||
|
|
cipSecGlobalOutAuths,
|
||
|
|
cipSecGlobalOutAuthFails,
|
||
|
|
cipSecGlobalOutEncrypts,
|
||
|
|
cipSecGlobalOutEncryptFails,
|
||
|
|
cipSecGlobalProtocolUseFails,
|
||
|
|
cipSecGlobalNoSaFails,
|
||
|
|
cipSecGlobalSysCapFails,
|
||
|
|
cipSecTunIkeTunnelIndex,
|
||
|
|
cipSecTunIkeTunnelAlive,
|
||
|
|
cipSecTunLocalAddr,
|
||
|
|
cipSecTunRemoteAddr,
|
||
|
|
cipSecTunKeyType,
|
||
|
|
cipSecTunEncapMode,
|
||
|
|
cipSecTunLifeSize,
|
||
|
|
cipSecTunLifeTime,
|
||
|
|
cipSecTunActiveTime,
|
||
|
|
cipSecTunSaLifeSizeThreshold,
|
||
|
|
cipSecTunSaLifeTimeThreshold,
|
||
|
|
cipSecTunTotalRefreshes,
|
||
|
|
cipSecTunExpiredSaInstances,
|
||
|
|
cipSecTunCurrentSaInstances,
|
||
|
|
cipSecTunInSaDiffHellmanGrp,
|
||
|
|
cipSecTunInSaEncryptAlgo,
|
||
|
|
cipSecTunInSaAhAuthAlgo,
|
||
|
|
cipSecTunInSaEspAuthAlgo,
|
||
|
|
cipSecTunInSaDecompAlgo,
|
||
|
|
cipSecTunOutSaDiffHellmanGrp,
|
||
|
|
cipSecTunOutSaEncryptAlgo,
|
||
|
|
cipSecTunOutSaAhAuthAlgo,
|
||
|
|
cipSecTunOutSaEspAuthAlgo,
|
||
|
|
cipSecTunOutSaCompAlgo,
|
||
|
|
cipSecTunInOctets,
|
||
|
|
cipSecTunHcInOctets,
|
||
|
|
cipSecTunInOctWraps,
|
||
|
|
cipSecTunInDecompOctets,
|
||
|
|
cipSecTunHcInDecompOctets,
|
||
|
|
cipSecTunInDecompOctWraps,
|
||
|
|
cipSecTunInPkts,
|
||
|
|
cipSecTunInDropPkts,
|
||
|
|
cipSecTunInReplayDropPkts,
|
||
|
|
cipSecTunInAuths,
|
||
|
|
cipSecTunInAuthFails,
|
||
|
|
cipSecTunInDecrypts,
|
||
|
|
cipSecTunInDecryptFails,
|
||
|
|
cipSecTunOutOctets,
|
||
|
|
cipSecTunHcOutOctets,
|
||
|
|
cipSecTunOutOctWraps,
|
||
|
|
cipSecTunOutUncompOctets,
|
||
|
|
cipSecTunHcOutUncompOctets,
|
||
|
|
cipSecTunOutUncompOctWraps,
|
||
|
|
cipSecTunOutPkts,
|
||
|
|
cipSecTunOutDropPkts,
|
||
|
|
cipSecTunOutAuths,
|
||
|
|
cipSecTunOutAuthFails,
|
||
|
|
cipSecTunOutEncrypts,
|
||
|
|
cipSecTunOutEncryptFails,
|
||
|
|
cipSecTunStatus,
|
||
|
|
cipSecEndPtLocalName,
|
||
|
|
cipSecEndPtLocalType,
|
||
|
|
cipSecEndPtLocalAddr1,
|
||
|
|
cipSecEndPtLocalAddr2,
|
||
|
|
cipSecEndPtLocalProtocol,
|
||
|
|
cipSecEndPtLocalPort,
|
||
|
|
cipSecEndPtRemoteName,
|
||
|
|
cipSecEndPtRemoteType,
|
||
|
|
cipSecEndPtRemoteAddr1,
|
||
|
|
cipSecEndPtRemoteAddr2,
|
||
|
|
cipSecEndPtRemoteProtocol,
|
||
|
|
cipSecEndPtRemotePort,
|
||
|
|
cipSecSpiDirection,
|
||
|
|
cipSecSpiValue,
|
||
|
|
cipSecSpiProtocol,
|
||
|
|
cipSecSpiStatus
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group consists of:
|
||
|
|
1) IPsec Phase-2 Global Statistics
|
||
|
|
2) IPsec Phase-2 Tunnel Table
|
||
|
|
3) IPsec Phase-2 Endpoint Table
|
||
|
|
4) IPsec Phase-2 Security Protection Index Table"
|
||
|
|
::= { cipSecMIBGroups 3 }
|
||
|
|
|
||
|
|
cipSecHistoryGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cipSecHistTableSize,
|
||
|
|
cipSecHistCheckPoint,
|
||
|
|
cikeTunHistTermReason,
|
||
|
|
cikeTunHistActiveIndex,
|
||
|
|
cikeTunHistPeerLocalType,
|
||
|
|
cikeTunHistPeerLocalValue,
|
||
|
|
cikeTunHistPeerIntIndex,
|
||
|
|
cikeTunHistPeerRemoteType,
|
||
|
|
cikeTunHistPeerRemoteValue,
|
||
|
|
cikeTunHistLocalAddr,
|
||
|
|
cikeTunHistLocalName,
|
||
|
|
cikeTunHistRemoteAddr,
|
||
|
|
cikeTunHistRemoteName,
|
||
|
|
cikeTunHistNegoMode,
|
||
|
|
cikeTunHistDiffHellmanGrp,
|
||
|
|
cikeTunHistEncryptAlgo,
|
||
|
|
cikeTunHistHashAlgo,
|
||
|
|
cikeTunHistAuthMethod,
|
||
|
|
cikeTunHistLifeTime,
|
||
|
|
cikeTunHistStartTime,
|
||
|
|
cikeTunHistActiveTime,
|
||
|
|
cikeTunHistTotalRefreshes,
|
||
|
|
cikeTunHistTotalSas,
|
||
|
|
cikeTunHistInOctets,
|
||
|
|
cikeTunHistInPkts,
|
||
|
|
cikeTunHistInDropPkts,
|
||
|
|
cikeTunHistInNotifys,
|
||
|
|
cikeTunHistInP2Exchgs,
|
||
|
|
cikeTunHistInP2ExchgInvalids,
|
||
|
|
cikeTunHistInP2ExchgRejects,
|
||
|
|
cikeTunHistInP2SaDelRequests,
|
||
|
|
cikeTunHistOutOctets,
|
||
|
|
cikeTunHistOutPkts,
|
||
|
|
cikeTunHistOutDropPkts,
|
||
|
|
cikeTunHistOutNotifys,
|
||
|
|
cikeTunHistOutP2Exchgs,
|
||
|
|
cikeTunHistOutP2ExchgInvalids,
|
||
|
|
cikeTunHistOutP2ExchgRejects,
|
||
|
|
cikeTunHistOutP2SaDelRequests,
|
||
|
|
cipSecTunHistTermReason,
|
||
|
|
cipSecTunHistActiveIndex,
|
||
|
|
cipSecTunHistIkeTunnelIndex,
|
||
|
|
cipSecTunHistLocalAddr,
|
||
|
|
cipSecTunHistRemoteAddr,
|
||
|
|
cipSecTunHistKeyType,
|
||
|
|
cipSecTunHistEncapMode,
|
||
|
|
cipSecTunHistLifeSize,
|
||
|
|
cipSecTunHistLifeTime,
|
||
|
|
cipSecTunHistStartTime,
|
||
|
|
cipSecTunHistActiveTime,
|
||
|
|
cipSecTunHistTotalRefreshes,
|
||
|
|
cipSecTunHistTotalSas,
|
||
|
|
cipSecTunHistInSaDiffHellmanGrp,
|
||
|
|
cipSecTunHistInSaEncryptAlgo,
|
||
|
|
cipSecTunHistInSaAhAuthAlgo,
|
||
|
|
cipSecTunHistInSaEspAuthAlgo,
|
||
|
|
cipSecTunHistInSaDecompAlgo,
|
||
|
|
cipSecTunHistOutSaDiffHellmanGrp,
|
||
|
|
cipSecTunHistOutSaEncryptAlgo,
|
||
|
|
cipSecTunHistOutSaAhAuthAlgo,
|
||
|
|
cipSecTunHistOutSaEspAuthAlgo,
|
||
|
|
cipSecTunHistOutSaCompAlgo,
|
||
|
|
cipSecTunHistInOctets,
|
||
|
|
cipSecTunHistHcInOctets,
|
||
|
|
cipSecTunHistInOctWraps,
|
||
|
|
cipSecTunHistInDecompOctets,
|
||
|
|
cipSecTunHistHcInDecompOctets,
|
||
|
|
cipSecTunHistInDecompOctWraps,
|
||
|
|
cipSecTunHistInPkts,
|
||
|
|
cipSecTunHistInDropPkts,
|
||
|
|
cipSecTunHistInReplayDropPkts,
|
||
|
|
cipSecTunHistInAuths,
|
||
|
|
cipSecTunHistInAuthFails,
|
||
|
|
cipSecTunHistInDecrypts,
|
||
|
|
cipSecTunHistInDecryptFails,
|
||
|
|
cipSecTunHistOutOctets,
|
||
|
|
cipSecTunHistHcOutOctets,
|
||
|
|
cipSecTunHistOutOctWraps,
|
||
|
|
cipSecTunHistOutUncompOctets,
|
||
|
|
cipSecTunHistHcOutUncompOctets,
|
||
|
|
cipSecTunHistOutUncompOctWraps,
|
||
|
|
cipSecTunHistOutPkts,
|
||
|
|
cipSecTunHistOutDropPkts,
|
||
|
|
cipSecTunHistOutAuths,
|
||
|
|
cipSecTunHistOutAuthFails,
|
||
|
|
cipSecTunHistOutEncrypts,
|
||
|
|
cipSecTunHistOutEncryptFails,
|
||
|
|
cipSecEndPtHistTunIndex,
|
||
|
|
cipSecEndPtHistActiveIndex,
|
||
|
|
cipSecEndPtHistLocalName,
|
||
|
|
cipSecEndPtHistLocalType,
|
||
|
|
cipSecEndPtHistLocalAddr1,
|
||
|
|
cipSecEndPtHistLocalAddr2,
|
||
|
|
cipSecEndPtHistLocalProtocol,
|
||
|
|
cipSecEndPtHistLocalPort,
|
||
|
|
cipSecEndPtHistRemoteName,
|
||
|
|
cipSecEndPtHistRemoteType,
|
||
|
|
cipSecEndPtHistRemoteAddr1,
|
||
|
|
cipSecEndPtHistRemoteAddr2,
|
||
|
|
cipSecEndPtHistRemoteProtocol,
|
||
|
|
cipSecEndPtHistRemotePort
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group consists of:
|
||
|
|
1) IPsec History Global Objects
|
||
|
|
2) IPsec Phase-1 History Objects
|
||
|
|
3) IPsec Phase-2 History Objects"
|
||
|
|
::= { cipSecMIBGroups 4 }
|
||
|
|
|
||
|
|
cipSecFailuresGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cipSecFailTableSize,
|
||
|
|
cikeFailReason,
|
||
|
|
cikeFailTime,
|
||
|
|
cikeFailLocalType,
|
||
|
|
cikeFailLocalValue,
|
||
|
|
cikeFailRemoteType,
|
||
|
|
cikeFailRemoteValue,
|
||
|
|
cikeFailLocalAddr,
|
||
|
|
cikeFailRemoteAddr,
|
||
|
|
cipSecFailReason,
|
||
|
|
cipSecFailTime,
|
||
|
|
cipSecFailTunnelIndex,
|
||
|
|
cipSecFailSaSpi,
|
||
|
|
cipSecFailPktSrcAddr,
|
||
|
|
cipSecFailPktDstAddr
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group consists of:
|
||
|
|
1) IPsec Failure Global Objects
|
||
|
|
2) IPsec Phase-1 Tunnel Failure Table
|
||
|
|
3) IPsec Phase-2 Tunnel Failure Table"
|
||
|
|
::= { cipSecMIBGroups 5 }
|
||
|
|
|
||
|
|
cipSecTrapCntlGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cipSecTrapCntlIkeTunnelStart,
|
||
|
|
cipSecTrapCntlIkeTunnelStop,
|
||
|
|
cipSecTrapCntlIkeSysFailure,
|
||
|
|
cipSecTrapCntlIkeCertCrlFailure,
|
||
|
|
cipSecTrapCntlIkeProtocolFail,
|
||
|
|
cipSecTrapCntlIkeNoSa,
|
||
|
|
cipSecTrapCntlIpSecTunnelStart,
|
||
|
|
cipSecTrapCntlIpSecTunnelStop,
|
||
|
|
cipSecTrapCntlIpSecSysFailure,
|
||
|
|
cipSecTrapCntlIpSecSetUpFailure,
|
||
|
|
cipSecTrapCntlIpSecEarlyTunTerm,
|
||
|
|
cipSecTrapCntlIpSecProtocolFail,
|
||
|
|
cipSecTrapCntlIpSecNoSa
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group of objects controls the sending of IPsec TRAPs."
|
||
|
|
::= { cipSecMIBGroups 6 }
|
||
|
|
|
||
|
|
cipSecNotificationGroup NOTIFICATION-GROUP
|
||
|
|
NOTIFICATIONS {
|
||
|
|
cikeTunnelStart,
|
||
|
|
cikeTunnelStop,
|
||
|
|
cikeSysFailure,
|
||
|
|
cikeCertCrlFailure,
|
||
|
|
cikeProtocolFailure,
|
||
|
|
cikeNoSa,
|
||
|
|
cipSecTunnelStart,
|
||
|
|
cipSecTunnelStop,
|
||
|
|
cipSecSysFailure,
|
||
|
|
cipSecSetUpFailure,
|
||
|
|
cipSecEarlyTunTerm,
|
||
|
|
cipSecProtocolFailure,
|
||
|
|
cipSecNoSa
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This group contains the notifications for the IPsec MIB."
|
||
|
|
::= { cipSecMIBGroups 7 }
|
||
|
|
|
||
|
|
cipSecGWStatsGroup OBJECT-GROUP
|
||
|
|
OBJECTS {
|
||
|
|
cikePhase1GWActiveTunnels,
|
||
|
|
cikePhase1GWPreviousTunnels,
|
||
|
|
cikePhase1GWInOctets,
|
||
|
|
cikePhase1GWInPkts,
|
||
|
|
cikePhase1GWInDropPkts,
|
||
|
|
cikePhase1GWInNotifys,
|
||
|
|
cikePhase1GWInP2Exchgs,
|
||
|
|
cikePhase1GWInP2ExchgInvalids,
|
||
|
|
cikePhase1GWInP2ExchgRejects,
|
||
|
|
cikePhase1GWInP2SaDelRequests,
|
||
|
|
cikePhase1GWOutOctets,
|
||
|
|
cikePhase1GWOutPkts,
|
||
|
|
cikePhase1GWOutDropPkts,
|
||
|
|
cikePhase1GWOutNotifys,
|
||
|
|
cikePhase1GWOutP2Exchgs,
|
||
|
|
cikePhase1GWOutP2ExchgInvalids,
|
||
|
|
cikePhase1GWOutP2ExchgRejects,
|
||
|
|
cikePhase1GWOutP2SaDelRequests,
|
||
|
|
cikePhase1GWInitTunnels,
|
||
|
|
cikePhase1GWInitTunnelFails,
|
||
|
|
cikePhase1GWRespTunnelFails,
|
||
|
|
cikePhase1GWSysCapFails,
|
||
|
|
cikePhase1GWAuthFails,
|
||
|
|
cikePhase1GWDecryptFails,
|
||
|
|
cikePhase1GWHashValidFails,
|
||
|
|
cikePhase1GWNoSaFails,
|
||
|
|
cipSecPhase2GWActiveTunnels,
|
||
|
|
cipSecPhase2GWPreviousTunnels,
|
||
|
|
cipSecPhase2GWInOctets,
|
||
|
|
cipSecPhase2GWInOctWraps,
|
||
|
|
cipSecPhase2GWInDecompOctets,
|
||
|
|
cipSecPhase2GWInDecompOctWraps,
|
||
|
|
cipSecPhase2GWInPkts,
|
||
|
|
cipSecPhase2GWInDrops,
|
||
|
|
cipSecPhase2GWInReplayDrops,
|
||
|
|
cipSecPhase2GWInAuths,
|
||
|
|
cipSecPhase2GWInAuthFails,
|
||
|
|
cipSecPhase2GWInDecrypts,
|
||
|
|
cipSecPhase2GWInDecryptFails,
|
||
|
|
cipSecPhase2GWOutOctets,
|
||
|
|
cipSecPhase2GWOutOctWraps,
|
||
|
|
cipSecPhase2GWOutUncompOctets,
|
||
|
|
cipSecPhase2GWOutUncompOctWraps,
|
||
|
|
cipSecPhase2GWOutPkts,
|
||
|
|
cipSecPhase2GWOutDrops,
|
||
|
|
cipSecPhase2GWOutAuths,
|
||
|
|
cipSecPhase2GWOutAuthFails,
|
||
|
|
cipSecPhase2GWOutEncrypts,
|
||
|
|
cipSecPhase2GWOutEncryptFails,
|
||
|
|
cipSecPhase2GWProtocolUseFails,
|
||
|
|
cipSecPhase2GWNoSaFails,
|
||
|
|
cipSecPhase2GWSysCapFails
|
||
|
|
}
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
""
|
||
|
|
::= { cipSecMIBGroups 8 }
|
||
|
|
|
||
|
|
END
|
||
|
|
|
||
|
|
|
||
|
|
|