mibs/MIBS/cisco/CISCO-ISDN-MIB

460 lines
14 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- CISCO-ISDN-MIB.my: Cisco ISDN MIB file
--
-- January 1995, Fred Baker, Bibek A. Das
--
-- Copyright (c) 1995-1996, 1999, 2000, 2001, 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ISDN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
Counter32,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
DisplayString,
TimeStamp,
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
ifIndex
FROM IF-MIB
isdnLapdOperStatus,
isdnSignalingIndex,
isdnSignalingIfIndex
FROM ISDN-MIB;
ciscoIsdnMib MODULE-IDENTITY
LAST-UPDATED "200102090000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-isdn@cisco.com"
DESCRIPTION
"The MIB module to describe the status of the ISDN
Interfaces on the routers."
REVISION "200102090000Z"
DESCRIPTION
"For a call connects, demandNbrLastDuration,
demandNbrClearReason, and demandNbrClearCode
objects are not included in the trap."
REVISION "200003270000Z"
DESCRIPTION
"Added demandNbrCNANotification when call rejected with
channel not available cause code"
REVISION "200002230000Z"
DESCRIPTION
"Removed an instantiated clause in description for
ciscoCallHistoryCallingNumber."
REVISION "9905070000Z"
DESCRIPTION
"Added a new trap for PRI layer 2 state changes."
REVISION "9602210000Z"
DESCRIPTION
"Add a new object demandNbrCallOrigin."
REVISION "9508150000Z"
DESCRIPTION
"Specify a correct (non-negative) range for an index
object."
REVISION "9501300000Z"
DESCRIPTION
"Initial version of Cisco ISDN MIB."
::= { ciscoMgmt 26 }
-- The ISDN hardware interface (BRI or PRI) will be represented
-- by the D channel. This will have an ifType value of basicISDN(20)
-- or primaryISDN(21), refer to RFC 1213. Each B channel will
-- also be represented in an an entry in the ifTable. The B
-- channels will have an ifType value of other(1).
-- This model will be used while defining objects and tables
-- for management.
-- The ISDN MIB will allow sub-layers. For example, the data transfer
-- over a B channel may take place with PPP encapsulation. While the
-- ISDN MIB will describe the B channel, a media specific MIB for
-- PPP can be used on a layered basis. This will be as per RFC 1573.
-- The isdn call information will be stored in the neighbor table
-- Isdn Mib objects definitions
ciscoIsdnMibObjects OBJECT IDENTIFIER ::= { ciscoIsdnMib 1 }
isdnNeighbor OBJECT IDENTIFIER ::= { ciscoIsdnMibObjects 1 }
demandNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DemandNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of neighbors from which the router will accept calls or
to which it will place them."
::= { isdnNeighbor 1 }
demandNbrEntry OBJECT-TYPE
SYNTAX DemandNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Neighbor. This entry is effectively permanent, and contains
information describing the neighbor, his permissions, his last call
attempt, and his cumulative effects."
INDEX {demandNbrPhysIf, demandNbrId }
::= { demandNbrTable 1 }
DemandNbrEntry ::=
SEQUENCE {
demandNbrPhysIf Integer32 (1..2147483647), -- ifIndex value
-- of the D channel
demandNbrId Integer32 (0..2147483647), -- sequence number
demandNbrLogIf Integer32 (1..2147483647), -- ifIndex value of
-- virtual interface
demandNbrName DisplayString, -- name of the neighbor
demandNbrAddress DisplayString, -- Call Address
demandNbrPermission INTEGER, -- applicable permissions
demandNbrMaxDuration Integer32 (1..2147483647), -- Max call duration
-- in seconds
demandNbrLastDuration Integer32 (1..2147483647), -- Duration of last
-- call
demandNbrClearReason DisplayString, -- reason last call completed
demandNbrClearCode OCTET STRING, -- reason last call completed
demandNbrSuccessCalls Counter32, -- number of completed calls to
-- neighbor
demandNbrFailCalls Counter32, -- number of failed call attempts
demandNbrAcceptCalls Counter32, -- number of calls from neighbor
-- accepted
demandNbrRefuseCalls Counter32, -- number of calls from neighbor
-- refused
demandNbrLastAttemptTime TimeStamp, -- sysUpTime of last
-- call attempt
demandNbrStatus RowStatus,
demandNbrCallOrigin INTEGER
}
demandNbrPhysIf OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ifIndex value of the physical interface the neighbor will be
called on. On an ISDN interface, this is the ifIndex value of
the D channel."
::= { demandNbrEntry 1 }
demandNbrId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"arbitrary sequence number associated with the neighbor."
::= { demandNbrEntry 2 }
demandNbrLogIf OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ifIndex value of virtual interface associated with the neighbor.
This interface maintains a queue of messages holding for the neighbor
awaiting call completion, and all statistics."
::= { demandNbrEntry 3 }
demandNbrName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ASCII name of the neighbor."
::= { demandNbrEntry 4 }
demandNbrAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Call Address at which the neighbor should be called.
Think of this as the set of characters following 'ATDT '
or the 'phone number' included in a D channel call request."
::= { demandNbrEntry 5 }
demandNbrPermission OBJECT-TYPE
SYNTAX INTEGER { iCanCallHim (1),
heCanCallMe (2),
weCanCallEachOther (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"applicable permissions."
DEFVAL { weCanCallEachOther }
::= { demandNbrEntry 6 }
demandNbrMaxDuration OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum call duration in seconds."
DEFVAL { 2147483647 }
::= { demandNbrEntry 7 }
demandNbrLastDuration OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duration of last call in seconds."
::= { demandNbrEntry 8 }
demandNbrClearReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ASCII reason that the last call terminated."
::= { demandNbrEntry 9 }
demandNbrClearCode OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"encoded reason for the last call tear down."
::= { demandNbrEntry 10 }
demandNbrSuccessCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"number of completed calls to neighbor since system reset."
::= { demandNbrEntry 11 }
demandNbrFailCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of call attempts that have failed."
::= { demandNbrEntry 12 }
demandNbrAcceptCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of calls accepted from the neighbor."
::= { demandNbrEntry 13 }
demandNbrRefuseCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of calls from neighbor that we have refused."
::= { demandNbrEntry 14 }
demandNbrLastAttemptTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sysUpTime of last call attempt."
::= { demandNbrEntry 15 }
demandNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Somebody might want to manage the device using SNMP some day..."
::= { demandNbrEntry 16 }
demandNbrCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
originate(1),
answer(2),
callback(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indication of outgoing or incoming call."
::= { demandNbrEntry 17 }
-- Traps related to Connection management
ciscoIsdnMibTrapPrefix OBJECT IDENTIFIER ::= { ciscoIsdnMib 2 }
ciscoIsdnMibTraps OBJECT IDENTIFIER ::= { ciscoIsdnMibTrapPrefix 0 }
demandNbrCallInformation NOTIFICATION-TYPE
OBJECTS {
demandNbrLogIf,
demandNbrName,
demandNbrAddress,
demandNbrLastDuration,
demandNbrClearReason,
demandNbrClearCode
}
STATUS obsolete
DESCRIPTION
"This trap/inform is sent to the manager whenever a successful
call clears, or a failed call attempt is determined to have
ultimately failed. In the event that call retry is active,
then this is after all retry attempts have failed. However,
only one such trap is sent in between successful call
attempts; subsequent call attempts result in no trap."
::= { ciscoIsdnMibTraps 1 }
demandNbrCallDetails NOTIFICATION-TYPE
OBJECTS {
demandNbrLogIf,
demandNbrName,
demandNbrAddress,
demandNbrLastDuration,
demandNbrClearReason,
demandNbrClearCode,
demandNbrCallOrigin
}
STATUS current
DESCRIPTION
"This trap/inform is sent to the manager whenever a call
connects, or clears, or a failed call attempt is determined to
have ultimately failed. In the event that call retry is active,
then this is after all retry attempts have failed. However,
only one such trap is sent in between successful call
attempts; subsequent call attempts result in no trap.
Whenever a call connects, demandNbrLastDuration,
demandNbrClearReason, and demandNbrClearCode objects are not
included in the trap."
::= { ciscoIsdnMibTraps 2 }
demandNbrLayer2Change NOTIFICATION-TYPE
OBJECTS {
ifIndex,
isdnLapdOperStatus
}
STATUS current
DESCRIPTION
"This trap/inform is sent to the manager whenever the
D-channel of an interface changes state."
::= { ciscoIsdnMibTraps 3 }
demandNbrCNANotification NOTIFICATION-TYPE
OBJECTS {
isdnSignalingIfIndex,
ifIndex
}
STATUS current
DESCRIPTION
"This trap/inform is sent to the manager whenever the
an incoming call request is rejected with cause
'requested circuit/channel not available' (CNA),
code number 44.
isdnSignalingIfIndex is the ifIndex value of the interface
associated with this signaling channel.
ifIndex is the interface index of the requested bearer channel
"
::= { ciscoIsdnMibTraps 4 }
-- conformance information
ciscoIsdnMibConformance OBJECT IDENTIFIER ::= { ciscoIsdnMib 3 }
ciscoIsdnMibCompliances OBJECT IDENTIFIER ::= { ciscoIsdnMibConformance 1 }
ciscoIsdnMibGroups OBJECT IDENTIFIER ::= { ciscoIsdnMibConformance 2 }
-- compliance statements
ciscoIsdnMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco ISDN MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoIsdnMibGroup }
::= { ciscoIsdnMibCompliances 1 }
ciscoIsdnMibComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Cisco ISDN MIB"
MODULE -- this module
MANDATORY-GROUPS { ciscoIsdnMibGroupRev1 }
::= { ciscoIsdnMibCompliances 2 }
-- units of conformance
ciscoIsdnMibGroup OBJECT-GROUP
OBJECTS {
demandNbrLogIf,
demandNbrName,
demandNbrAddress,
demandNbrPermission,
demandNbrMaxDuration,
demandNbrLastDuration,
demandNbrClearReason,
demandNbrClearCode,
demandNbrSuccessCalls,
demandNbrFailCalls,
demandNbrAcceptCalls,
demandNbrRefuseCalls,
demandNbrLastAttemptTime,
demandNbrStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the ISDN MIB capability."
::= { ciscoIsdnMibGroups 1 }
ciscoIsdnMibGroupRev1 OBJECT-GROUP
OBJECTS {
demandNbrLogIf,
demandNbrName,
demandNbrAddress,
demandNbrPermission,
demandNbrMaxDuration,
demandNbrLastDuration,
demandNbrClearReason,
demandNbrClearCode,
demandNbrSuccessCalls,
demandNbrFailCalls,
demandNbrAcceptCalls,
demandNbrRefuseCalls,
demandNbrLastAttemptTime,
demandNbrStatus,
demandNbrCallOrigin
}
STATUS current
DESCRIPTION
"A collection of objects providing the call origin capability."
::= { ciscoIsdnMibGroups 2 }
END