david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/cisco/CISCO-LWAPP-AP-MIB

11060 lines
392 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *******************************************************************
-- CISCO-LWAPP-AP-MIB.my
-- January 2006, Devesh Pujari, Prasanna Viswakumar, Srinath Candadai
-- August 2010, Suja Thangaveluchamy
-- Copyright (c) 2006-2007, 2010-2012, 2016-2018 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
CISCO-LWAPP-AP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Counter32,
Counter64,
TimeTicks,
Gauge32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue,
MacAddress,
TimeInterval,
RowStatus,
TimeStamp,
DateAndTime
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
PhysicalIndex
FROM ENTITY-MIB
InetAddressType,
InetAddress,
InetPortNumber
FROM INET-ADDRESS-MIB
IANAifType
FROM IANAifType-MIB
CLApIfType,
CLDot11Channel,
CLApAssocFailureReason,
CLApDot11RadioSubband,
CLApDot11RadioRole,
CLApMode
FROM CISCO-LWAPP-TC-MIB
cldRegulatoryDomain
FROM CISCO-LWAPP-DOT11-MIB
cLWlanIndex
FROM CISCO-LWAPP-WLAN-MIB
Unsigned64
FROM CISCO-TC
cLRFProfileHighDensityMaxRadioClients,
cLRFProfileHDClientTrapThreshold
FROM CISCO-LWAPP-RF-MIB
ciscoMgmt
FROM CISCO-SMI;
-- ********************************************************************
-- * MODULE IDENTITY
-- ********************************************************************
ciscoLwappApMIB MODULE-IDENTITY
LAST-UPDATED "201809300000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about the 802.11 Access Points that have joined the
controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Bluetooth Low Energy (BLE)
Bluetooth Low Energy is a light-weight subset of classic
bluetooth which is added in Hyper Action Location (HALO)
enabled APs to make use of BLE beacons to communicate
with wireless clients at short range.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Hyper Action Location (HALO)
This is an external module for Cisco Access Points,
which is responsible for high accuracy indoor
location. It includes smart antenna and new software
interfaces to enable high accuracy indoor location.
iBeacon
This is a low-cost transmitter which can transmit
its own unique identification number to the local
area.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Station Management (SMT)
This term refers to the internal management of the
802.11 protocol operations by the AP to work
cooperatively with the other APs and 802.11
devices in the network.
Link Latency
Latency is round trip time between AP and controller.
There is a continuous heart-beat between AP and
controller. AP calculates latency for each time and
sends to controller.
AMSDU
Aggregate MAC Service Data Unit. A structure containing
multiple MSDUs, transported within a single (unfragmented)
or multiple (fragmented) Data MPDU.
DTLS
Datagram Transport Layer Security (DTLS) protocol provides
communications privacy for datagram protocols. The protocol
allows client/server applications to communicate in a way
that is designed to prevent eavesdropping, tampering, or
message forgery.
WIPS
Wireless Intrusion Prevention System (WIPS) is a network device
that monitors the radio spectrum for the presence of
unauthorized access points (intrusion detection), and can
automatically take countermeasures (intrusion prevention).
SE
Spectrum Expert is an application software, which when
connected to Spectrum Intelligent Access Point, provides
detailed RF spectrum plots and data, and assist in diagnosing
network problems.
PPPOE
Point-to-Point Protocol Over Ethernet provides a standard
method to build sessions for transporting multi-protocol
datagrams between point-to-point links over Ethernet.
OEAP
Office Extended Access Point provides a method to extend their
office network to outside the office premises like the employee
homes, thereby providing a seamless experience to the employee
irrespective of the location of the work. This solution should
also support having private SSID whose data need to be switched
at the AP itself.
ME
Mobility Express wireless network solution comprises of at
least one 802.11ac Wave 2 Cisco Aironet Series access point
(AP) with an in-built software-based wireless controller (WLC)
managing other APs in the network. The AP acting as the WLC is
referred to as the master AP while the other APs in the Cisco
Mobility Express network, which are managed by this master AP,
are referred to as subordinate APs. In addition to acting as a
WLC, the master AP also operates as an AP to serve clients along
with the subordinate APs.
FIPS
Federal Information Processing Standards are a set of standards
that describe document processing, encryption algorithms and
other information technology standards for use within
non-military government agencies and by government contractors
and vendors who work with the agencies.
LAG
Link aggregation (LAG) is a partial implementation of the
802.3ad port aggregation standard. It bundles all of the
controller's distribution system ports into a single 802.3ad
port channel. This reduces the number of IP addresses required
to configure the ports on your controller. When LAG is enabled,
the system dynamically manages port redundancy and load
balances access points transparently to the user.
CAPWAP
The Control And Provisioning of Wireless Access Points (CAPWAP)
protocol is a standard, interoperable networking protocol that
enables a central wireless LAN Access Controller (AC) to manage
a collection of Wireless Termination Points (WTPs),
more commonly known as Wireless Access Points.
Flexible Radio Assignment
The Flexible Radio Assignment feature allows either manual
configuration of capable APs or for these APs to intelligently
determine the operating role of the integrated radios based on
the available RF environment. APs with flexible radio can
automatically detect when a high number of devices are connected
to a network and changes the dual radios in the access point
from 2.4 GHz/5 GHz to 5 GHz/5 GHz to serve more clients.
The AP performs this task while monitoring the network for
security threats and RF Interference that may affect
performance. Flexible Radio Assignment improves mobile user
experience for high-density networks.
XOR Radio
XOR radio is a radio that can operate on both 2.4Ghz and 5Ghz
bandwidth.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol."
REVISION "201809170000Z"
DESCRIPTION
"Addition of following new table
- cLApProfileTable
- cLApProfileHaloBleBeaconTable
- cLApPacketCaptureProfileTable
- cLApPacketCaptureClientTable
- cLApPacketCaptureApTable
Added following object to the cLApTable
- cLApModeClear
- cLApSiteTagName
- cLApRfTagName
- cLApPolicyTagName
- cLApTagSource
- cLApUsbModuleName
- cLApUsbModuleState
- cLApUsbModuleProductId
- cLApUsbDescription
- cLApUsbStateInfo
- cLApUsbOverride
- cLApUsbSerialNumber
- cLApUsbMaxPower
Added following object to the cLApBleBeaconTable
- cLApBleBeaconAdvTxPower
Added following scalar object
- cLApAuthorizeApMacAuth
- cLApAuthorizeApSerialNumAuth
- cLApAuthorizeApMethodList
deprecated the following compliance group
- ciscoLwappApMIBComplianceRev7
Added following compliance group
- ciscoLwappApMIBComplianceRev8
Added following conformance group
- ciscoLwappApProfileHaloBleGroup
- ciscoLwappApProfileGroup
- ciscoLwappApPacketCaptureProfileGroup
- ciscoLwappApPacketCaptureClientProfileGroup."
REVISION "201807260000Z"
DESCRIPTION
"Added following objects to cLApDot11IfTable :
- cLApFraSuggestedMode
- cLApFraCoverageOverlapFactor."
REVISION "201806260000Z"
DESCRIPTION
"Added enums bleTxRx and bleRxOnly to cLApDot11RadioSubType."
REVISION "201803280000Z"
DESCRIPTION
"Added new object cLApDot11axSupport to the table
cLApDot11IfTable.
Added new group ciscoLwappApGroupSup11."
REVISION "201804240101Z"
DESCRIPTION
"Added the following objects
- cLApGlobal802dot1xSupplicantEapType
- cLAp802dot1xSupplicantOverrideEapType"
REVISION "201804240000Z"
DESCRIPTION
"Added the following deprecated objects to
ciscoLwappApGroupSup4 :
- cLApExtensionChannel
- cLAdjChannelRogueEnabled
- cLApWipsEnable
- cLApNwLegacyBeamForming."
REVISION "201707070000Z"
DESCRIPTION
"Updated the descriptions."
REVISION "201705070000Z"
DESCRIPTION
"Added attribute cLApSecureCipher.
Added global attribute cLApGlobalMaxApsSupported."
REVISION "201608300000Z"
DESCRIPTION
"Added following objects to cLApDot11IfTable :
- cLApDot11XorRadioMode
- cLApDot11XorRadioBand
- cLApDot11XorRadioRoleAssignment
Added onesixty enum option to cLAp11ChannelBandwidth.
Added enums remoteLan and xorTxRx to cLApDot11RadioSubType.
Added cLApDot11XorRadioRoleChangeReason,
ciscoLwappRadioRoleChangeNotify and
ciscoLwappXorRadioRoleChangeEnabled.
Added following new groups
- ciscoLwappApXorRadioGroup.
- ciscoLwappApNotifsXorGroup."
REVISION "201604070000Z"
DESCRIPTION
"Added new object cLApLEDState to the table
cLApTable.
Addition of new tables cLAplanStatsTable, cLHaloBleBeaconTable
and cLApBleBeaconTable."
REVISION "201509210000Z"
DESCRIPTION
"Added new object cLApLEDState to the table
cLApTable.
Addition of new table cLAplanStatsTable as part of VLAN tagging
feature.
Added cLApIsUniversal and cLApUniversalPrimeStatus objects to
cLApTable."
REVISION "201407150000Z"
DESCRIPTION
"Add new enumeration twentyFiveDotFive(7)
to cLApPowerStatus.
Added following OBJECT-GROUP
- ciscoLwappApGroupSup8
- ciscoLwappApNotifsGroupVer2
- ciscoLwappApGroupSup9
- ciscoLwappApRadioGroupSup1"
REVISION "201206130000Z"
DESCRIPTION
"Added ciscoLwappDot11IfAntennaGroup and
ciscoLwappRetransmitGroup"
REVISION "201102070000Z"
DESCRIPTION
"Addressed Approver's comments."
REVISION "201101210000Z"
DESCRIPTION
"Addressed reviwer's comments."
REVISION "201101100000Z"
DESCRIPTION
"Addressed reviewer's comments."
REVISION "201012130000Z"
DESCRIPTION
"Addressed Reviwer's comments"
REVISION "201008190000Z"
DESCRIPTION
"Added cLApGlobal, cLApCredentials, cLSpectrum,
cLAp802dot1xSupplicant mib objects.
Added link latency tables, cLApEncryptionEnable.
cLApDot11RadioTable have been added to provide support
for subband radios.
AP uptime, join time, join taken time and Ethernet slot info
have been added to clApTable. cLApEthernetIfTable which
provides Ethernet interface status and statistics information
has been added.
The group ciscoLwappApGroupSup3, ciscoLwappApGroupSup4,
ciscoLwappApNotifObjsGroup and ciscoLwappApNotifsGroup
have been added."
REVISION "200701030000Z"
DESCRIPTION
"The object cLApName has been added."
REVISION "200607180000Z"
DESCRIPTION
"Added cLApEntPhysicalIndex object."
REVISION "200603300000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 513 }
ciscoLwappApMIBNotifs OBJECT IDENTIFIER
::= { ciscoLwappApMIB 0 }
ciscoLwappApMIBObjects OBJECT IDENTIFIER
::= { ciscoLwappApMIB 1 }
ciscoLwappApMIBConform OBJECT IDENTIFIER
::= { ciscoLwappApMIB 2 }
ciscoLwappApMIBNotifObjects OBJECT IDENTIFIER
::= { ciscoLwappApMIB 3 }
ciscoLwappAp OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 1 }
ciscoLwappApIf OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 2 }
ciscoLwappApGlobal OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 3 }
ciscoLwappApCredentials OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 4 }
ciscoLwappLinkLatency OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 5 }
ciscoLwappSpectrum OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 6 }
ciscoLwappAp802dot1xSupplicant OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 7 }
ciscoLwappApWlanStats OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 9 }
ciscoLwappApWlanInfo OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 10 }
ciscoLwappPacketDumpInfo OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 11 }
ciscoLwappAplanStats OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 12 }
ciscoLwappApGlobalBleBeacon OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 13 }
ciscoLwappApHyperlocation OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 14 }
ciscoLwappApSecureCipher OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 15 }
ciscoLwappApProfile OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 16 }
ciscoLwappApPacketCapture OBJECT IDENTIFIER
::= { ciscoLwappApMIBObjects 17 }
-- ********************************************************************
-- APs that have joined the controller
-- ********************************************************************
cLApTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
802.11 LWAPP Access Points that have joined the
controller.
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations, after they join the
controller."
::= { ciscoLwappAp 1 }
cLApEntry OBJECT-TYPE
SYNTAX CLApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined the
controller.
Entries are removed when the APs lose their
association with the controller due to loss
of communication."
INDEX { cLApSysMacAddress }
::= { cLApTable 1 }
CLApEntry ::= SEQUENCE {
cLApSysMacAddress MacAddress,
cLApIfMacAddress MacAddress,
cLApMaxNumberOfDot11Slots Unsigned32,
cLApEntPhysicalIndex PhysicalIndex,
cLApName SnmpAdminString,
cLApUpTime TimeTicks,
cLLwappUpTime TimeTicks,
cLLwappJoinTakenTime TimeTicks,
cLApMaxNumberOfEthernetSlots Unsigned32,
cLApPrimaryControllerAddressType InetAddressType,
cLApPrimaryControllerAddress InetAddress,
cLApSecondaryControllerAddressType InetAddressType,
cLApSecondaryControllerAddress InetAddress,
cLApTertiaryControllerAddressType InetAddressType,
cLApTertiaryControllerAddress InetAddress,
cLApLastRebootReason INTEGER,
cLApEncryptionEnable TruthValue,
cLApFailoverPriority INTEGER,
cLApPowerStatus INTEGER,
cLApTelnetEnable TruthValue,
cLApSshEnable TruthValue,
cLApPreStdStateEnabled TruthValue,
cLApPwrInjectorStateEnabled TruthValue,
cLApPwrInjectorSelection INTEGER,
cLApPwrInjectorSwMacAddr MacAddress,
cLApWipsEnable TruthValue,
cLApMonitorModeOptimization INTEGER,
cLApDomainName SnmpAdminString,
cLApNameServerAddressType InetAddressType,
cLApNameServerAddress InetAddress,
cLApAMSDUEnable TruthValue,
cLApEncryptionSupported TruthValue,
cLApRogueDetectionEnabled TruthValue,
cLApTcpMss Integer32,
cLApDataEncryptionStatus TruthValue,
cLApNsiKey SnmpAdminString,
cLApAdminStatus TruthValue,
cLApPortNumber InetPortNumber,
cLApRetransmitCount Unsigned32,
cLApRetransmitTimeout Unsigned32,
cLApVenueConfigVenueGroup INTEGER,
cLApVenueConfigVenueType INTEGER,
cLApVenueConfigVenueName SnmpAdminString,
cLApVenueConfigLanguage SnmpAdminString,
cLApLEDState TruthValue,
cLApTrunkVlan Unsigned32,
cLApTrunkVlanStatus TruthValue,
cLApLocation SnmpAdminString,
cLApSubMode INTEGER,
cLApAssocCount Unsigned32,
cLApAssocFailResourceCount Unsigned32,
cLApRealTimeStatsModeEnabled TruthValue,
cLApAssociatedClientCount Unsigned32,
cLApMemoryCurrentUsage Unsigned32,
cLApMemoryAverageUsage Unsigned32,
cLApCpuCurrentUsage Unsigned32,
cLApCpuAverageUsage Unsigned32,
cLApUpgradeFromVersion SnmpAdminString,
cLApUpgradeToVersion SnmpAdminString,
cLApUpgradeFailureCause SnmpAdminString,
cLApMaxClientLimitNumberTrap Unsigned32,
cLApMaxClientLimitCause SnmpAdminString,
cLApMaxClientLimitSet TruthValue,
cLApFloorLabel Unsigned64,
cLApConnectCount Unsigned32,
cLApReassocSuccCount Counter32,
cLApReassocFailCount Counter32,
cLAdjChannelRogueEnabled TruthValue,
cLApAssocFailCountByRate Unsigned32,
cLApAbnormalOfflineCount Unsigned32,
cLApActiveClientCount Unsigned32,
cLApAssocFailCountForRssiLow Unsigned32,
cLApSysNetId SnmpAdminString,
cLApAssocFailTimes Counter32,
cLApAntennaBandMode INTEGER,
cLApHeartBeatRspAvgTime Integer32,
cLApEchoRequestCount Counter32,
cLApEchoResponseLossCount Counter32,
cLApModuleInserted SnmpAdminString,
cLApEnableModule TruthValue,
cLApIsUniversal TruthValue,
cLApUniversalPrimeStatus SnmpAdminString,
cLApIsMaster TruthValue,
cLApBleFWDownloadStatus TruthValue,
cLApDot11XorDartConnectorStatus SnmpAdminString,
cLApCtsSxpDefaultPassword SnmpAdminString,
cLApCtsSxpState TruthValue,
cLApCtsSxpMode TruthValue,
cLApCtsSxpListenerMinHoldtime Unsigned32,
cLApCtsSxpListenerMaxHoldtime Unsigned32,
cLApCtsSxpReconcilePeriod Unsigned32,
cLApCtsSxpRetryPeriod Unsigned32,
cLApCtsSxpSpeakerHoldTime Unsigned32,
cLApCtsSxpSpeakerKeepAlive Unsigned32,
cLApCtsInlineTagStatus TruthValue,
cLApCtsSgaclStatus TruthValue,
cLApCtsOverrideStatus TruthValue,
cLApModeClear TruthValue,
cLApSiteTagName SnmpAdminString,
cLApRfTagName SnmpAdminString,
cLApPolicyTagName SnmpAdminString,
cLApTagSource INTEGER,
cLApUsbModuleName SnmpAdminString,
cLApUsbModuleState SnmpAdminString,
cLApUsbModuleProductId SnmpAdminString,
cLApUsbDescription SnmpAdminString,
cLApUsbStateInfo TruthValue,
cLApUsbOverride TruthValue,
cLApUsbSerialNumber SnmpAdminString,
cLApUsbMaxPower Unsigned32
}
cLApSysMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the radio MAC address
common to the dot11 interfaces of the AP
and uniquely identifies an entry in this table."
::= { cLApEntry 1 }
cLApIfMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Ethernet MAC address of
the AP."
::= { cLApEntry 2 }
cLApMaxNumberOfDot11Slots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum number of
802.11 radio interface slots in this AP."
::= { cLApEntry 3 }
cLApEntPhysicalIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object provides the index value in the
entPhysicalEntry corresponding to this AP."
::= { cLApEntry 4 }
cLApName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the administrative name
assigned to the AP by the user. If an AP is not configured,
its factory default name will be ap:<last three byte
of MACAddress> eg. ap:af:12:be."
::= { cLApEntry 5 }
cLApUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time in hundredths
of a second since the last time the AP rebooted."
::= { cLApEntry 6 }
cLLwappUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time in hundredths
of a second since the last time the AP joined
the controller."
::= { cLApEntry 7 }
cLLwappJoinTakenTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time taken in hundredths
of a second for the AP to join the controller. This
could be a significant value in Mesh environments."
::= { cLApEntry 8 }
cLApMaxNumberOfEthernetSlots OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum number of
Ethernet slots in this AP."
::= { cLApEntry 9 }
cLApPrimaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the primary
controller's address made available through
cLApPrimaryControllerAddress."
::= { cLApEntry 10 }
cLApPrimaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the primary
controller that the APs will join."
::= { cLApEntry 11 }
cLApSecondaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the secondary
controller's address made available through
cLApSecondaryControllerAddress."
::= { cLApEntry 12 }
cLApSecondaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the secondary
controller that the APs will join."
::= { cLApEntry 13 }
cLApTertiaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the tertiary
controller's address made available through
cLApTertiaryControllerAddress."
::= { cLApEntry 14 }
cLApTertiaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the tertiary
controller that the APs will join."
::= { cLApEntry 15 }
cLApLastRebootReason OBJECT-TYPE
SYNTAX INTEGER {
none(0),
dot11gModeChange(1),
ipAddressSet(2),
ipAddressReset(3),
rebootFromController(4),
dhcpFallbackFail(5),
discoveryFail(6),
noJoinResponse(7),
denyJoin(8),
noConfigResponse(9),
configController(10),
imageUpgradeSuccess(11),
imageOpcodeInvalid(12),
imageCheckSumInvalid(13),
imageDataTimeout(14),
configFileInvalid(15),
imageDownloadError(16),
rebootFromConsole(17),
rapOverAir(18),
powerLow(19),
crash(20),
powerHigh(21),
powerLoss(22),
powerChange(23),
componentFailure(24),
watchdog(25),
lscEnabled(26),
lscDisabled(27),
lscProvTimeout(28),
lscMaxProvReqRetries(29),
lscLoadFailure(30),
lscJoinFailure(31),
capwapTimerFailure(32),
staticIpFailover(33),
vlanTagFailover(34),
capwapDiscoveryRequest(35),
capwapDiscoveryResponse(36),
capwapJoinRequest(37),
capwapJoinResponse(38),
capwapConfigurationStatus(39),
capwapConfigurationStatusResponse(40),
capwapConfigurationUpdateRequest(41),
capwapConfigurationUpdateResponse(42),
capwapWtpEventRequest(43),
capwapWtpEventResponse(44),
capwapChangeStateEventRequest(45),
capwapChangeStateEventResponse(46),
capwapEchoRequest(47),
capwapEchoResponse(48),
capwapImageDataRequest(49),
capwapImageDataResponse(50),
capwapResetRequest(51),
capwapResetResponse(52),
capwapPrimaryDiscoveryRequest(53),
capwapPrimaryDiscoveryResponse(54),
capwapDataTransferRequest(55),
capwapDataTransferResponse(56),
capwapClearConfigurationRequest(57),
capwapClearConfigurationResponse(58),
capwapMobileConfigurationRequest(59),
capwapMobileConfigurationResponse(60),
capwapPathMtuRequest(61),
capwapPathMtuResponse(62),
vlanTagRetry(63),
ipv6AddrSet(64),
modeChange(65),
typeChangedToCapwap(66),
typeChangedToMe(67),
eraseCfgCommand(68),
oeapModeCfgUpload(69),
lagCfg(70),
fipsModeChange(71),
diminishedPowerChange(72),
slubDebug(73)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the reason for the last
reboot of the AP.
none - ap reported a reboot reason code
unknown to the controller.
dot11gModeChange - 11g mode change
ipAddressSet - set static ip address
ipAddressReset - reset static ip address
rebootFromController - ap reboot initiated
from controller
dhcpFallbackFail - could not fallback to dhcp
discoveryFail - could not send discovery
noJoinResponse - did not receive join response
denyJoin - deny join attempt at
the controller
noConfigResponse - did not get config response
configController - found configured or master
controller
imageUpgradeSuccess - image upgraded successfully
imageOpcodeInvalid - invalid image data opcode
imageCheckSumInvalid - invalid image md5 checksum
imageDataTimeout - image data message timeout
configFileInvalid - invalid config file
imageDownloadError - image download process error
rebootFromConsole - reboot command from ap console
rapOverAir - root access point is connected
over the air
brownout - ap rebooted due to power failure
powerLow - ap rebooted dued to low power
also called as brownout
crash - crashed due to software failure
powerHigh - rebooted due to power spike
powerLoss - rebooted due to power loss
powerChange - rebooted due to change in
power source
componentFailure - rebooted due to component
failure
watchdog - rebooted due to watch dog
timer reset.
lscEnabled - rebooted as LSC was enabled
lscDisabled - rebooted as LSC was disabled
lscProvTimeout - rebooted due to LSC provision timeout
lscMaxProvReqRetries - rebooted due to maximum retries
of LSC provision request
lscLoadFailure - rebooted due to LSC load failure
lscJoinFailure - rebooted due to LSC join failure.
capwapTimerFailure - rebooted due to capwap timer
failure
staticIpFailover - rebooted due to static IP failover
vlanTagFailover - rebooted due to vlan tag failover
capwapDiscoveryRequest - link failure while processing
capwap discovery request
capwapDiscoveryResponse - link failure while processing
capwap discovery response
capwapJoinRequest - rebooted due to capwap
join request
capwapJoinResponse - rebooted due to capwap
join response
capwapConfigurationStatus- rebooted due to capwap
configuration status request
capwapConfigurationStatusResponse - rebooted due to
capwap configuration status response
capwapConfigurationUpdateRequest- rebooted due to
capwap configuration update request
capwapConfigurationUpdateResponse - rebooted due to
capwap configuration update response
capwapWtpEventRequest - rebooted due to capwap WTP
event request
capwapWtpEventResponse - rebooted due to capwap WTP
event response
capwapChangeStateEventRequest - rebooted due to capwap
change state event request
capwapChangeStateEventResponse - rebooted due to capwap
change state event response
capwapEchoRequest - rebooted due to capwap
echo request
capwapEchoResponse - rebooted due to capwap
echo response
capwapImageDataRequest - rebooted due to capwap
image data request
capwapImageDataResponse - rebooted due to capwap
image data response
capwapResetRequest - rebooted due to capwap
reset request
capwapResetResponse - rebooted due to capwap
reset response
capwapPrimaryDiscoveryRequest - rebooted due to capwap
primary discovery request
capwapPrimaryDiscoveryResponse - rebooted due to capwap
primary discovery response
capwapDataTransferRequest - rebooted due to capwap
data transfer request
capwapDataTransferResponse - rebooted due to capwap
data transfer response
capwapClearConfigurationRequest-rebooted due to capwap
clear configuration request
capwapClearConfigurationResponse-rebooted due to capwap
clear configuration response
capwapMobileConfigurationRequest-rebooted due to capwap
mobile configuration request
capwapMobileConfigurationResponse-rebooted due to
capwap mobile configuration
response
capwapPathMtuRequest - rebooted due to capwap
path MTU request
capwapPathMtuResponse - rebooted due to capwap
path MTU response.
vlanTagRetry - rebooted due to vlan tag retry
ipv6AddrSet - rebooted due to setting of static ipv6
address
modeChange - rebooted due to mode change
typeChangedToCapwap - rebooted due to type changed from
ME(Mobility Express) to CAPWAP
typeChangedToMe - rebooted due to type changed from
CAPWAP to ME(Mobility Express)
eraseCfgCommand - rebooted due to erase config command
oeapModeCfgUpload - rebooted due to OEAP(Office
Extended Access Point) mode config upload
lagCfg - rebooted due to LAG(Link Aggregate Group)
configuration change
fipsModeChange - rebooted due to FIPS(Federal
Information Processing Standards) mode change
diminishedPowerChange - rebooted due to change in
diminished power
slubDebug - rebooted due to slub debug"
::= { cLApEntry 16 }
cLApEncryptionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether encyrption between
controller and AP is enabled or not. Encryption
can only be enabled if ESM card in controller is
pluged in.
A value of 'true' enables encryption between
controller and AP.
A value of 'false' disables encryption between
controller and AP."
DEFVAL { false }
::= { cLApEntry 18 }
cLApFailoverPriority OBJECT-TYPE
SYNTAX INTEGER {
low(1),
medium(2),
high(3),
critical(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP failover priority
for an AP. If a higher priority AP wishes to join
the controller, it will be given preference over
a join request from a lower priority AP. Also if the
number of AP joined has reached the limit that the
controller can support then the controller can disassociate
an already joined lower priority AP. This priority will be
considered only if the cLApGlobalFailoverPriority is
Enabled on the controller.
low - AP failover priority is low for this controller.
medium - AP failover priority is medium for this controller.
high - AP failover priority is high for this controller.
critical - AP failover priority is critical for this
controller."
DEFVAL { low }
::= { cLApEntry 19 }
cLApPowerStatus OBJECT-TYPE
SYNTAX INTEGER {
low(1),
fifteendotfour(2),
sixteendoteight(3),
full(4),
external(5),
twentyfivedotfive(6),
mixedmode(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the power status of the AP
low - The AP is drawing low power from
Ethernet
fifteendotfour - The AP is drawing 15.4 watts from
Ethernet
sixteendoteight - The AP is drawing 16.8 watts from
Ethernet
twentyfivedotfive - The AP is drawing 25.5 watts from
Ethernet
full - The power is high enough for
normal operation of the AP.
The power source could be
Ethernet or external
external - The power source is not from
Ethernet.
mixedmode - The power is high enough for
operation of AP. In this state
one radio will operate in full
power mode while the other radio
will be powered off or operate
at reduced capacity."
::= { cLApEntry 20 }
cLApTelnetEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether telnet session
can be established to the AP.
A value of 'true' indicates an telnet session
can be established to the AP.
A value of 'false' indicates an telnet session
cannot be established to the AP."
DEFVAL { false }
::= { cLApEntry 21 }
cLApSshEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SSH session
can be established to the AP.
A value of 'true' indicates an SSH session
can be established to the AP.
A value of 'false' indicates an SSH session
cannot be established to the AP."
DEFVAL { false }
::= { cLApEntry 22 }
cLApPreStdStateEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the pre-standard state
of the AP is enabled or disabled.
A value of 'true' indicates that the pre-standard state
of the AP is enabled,
A value of 'false' indicates that the pre-standard state
of the AP is disabled"
::= { cLApEntry 23 }
cLApPwrInjectorStateEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the power injector state
of the AP is enabled or disabled.
A value of 'true' indicates that the power injector state
of the AP is enabled,
A value of 'false' indicates that the power injector state
of the AP is disabled"
::= { cLApEntry 24 }
cLApPwrInjectorSelection OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
installed(2),
override(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the power injector selection
value of the AP.
'unknown' - is returned if
'cLApPwrInjectorStateEnabled'is set to false.
'installed' - configure the MAC address of the
switch port that has a Power Injector.
'override' - override the safety checks and assume
a power injector is always installed."
::= { cLApEntry 25 }
cLApPwrInjectorSwMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the MAC address of the
switch port that has a power Injector and is
valid only when the 'cLApPwrInjectorSelection'
is in 'installed' mode.
if SET to 00:00:00:00:00:00, AP will detect the
MAC address of the current switch port that has
a Power Injector"
::= { cLApEntry 26 }
cLApWipsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object represents if this AP is used
as WIPS AP.
A value of 'true' indicates that this AP is
a WIPS AP.
A value of 'false' indicates that this AP is
not a WIPS AP. This applies only when the
AP is either in local or monitor mode."
DEFVAL { false }
::= { cLApEntry 27 }
cLApMonitorModeOptimization OBJECT-TYPE
SYNTAX INTEGER {
all(1),
tracking(2),
wips(3),
none(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the monitor mode optimization
on this device.
all - All optimization is enabled
tracking - Tracking is optimized
wips - WIPS optimization is enabled
none - No optimization is enabled"
::= { cLApEntry 28 }
cLApDomainName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the domain, to which the AP belongs.
This attribute can be configured only if the static IP
option is turned on in the AP."
::= { cLApEntry 29 }
cLApNameServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the IP address of the
name server, made available through cLApNameServerAddress."
::= { cLApEntry 30 }
cLApNameServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the IP Address of the name server.
This attribute can be configured only if the static IP
option is turned on in the AP."
::= { cLApEntry 31 }
cLApAMSDUEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AMSDU status.
A value of 'true' indicates AMSDU is enabled.
A value of 'false' indicates AMSDU is disabled."
DEFVAL { false }
::= { cLApEntry 32 }
cLApEncryptionSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether AP Supports
DTLS encryption.
A value of 'true' indicates encryption is supported.
A value of 'false' indicates encryption is not supported."
DEFVAL { false }
::= { cLApEntry 33 }
cLApRogueDetectionEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Rogue Detection
is enabled in this AP.
A value of 'true' indicates rogue detection is enabled.
A value of 'false' indicates rogue detection is disabled.
Rogue detection is not supported on sniffer
and rogue detector mode APs."
DEFVAL { false }
::= { cLApEntry 34 }
cLApTcpMss OBJECT-TYPE
SYNTAX Integer32 (0 | 536..1363)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the TCP Maximum Segment Size
for this AP.
Permissible value are between 536 and 1363. This will
also enable the TCP MSS flag for this AP.
Value of 0 will disable the TCP MSS flag for this AP.
Any change of value for cLApGlobalTcpMss will be
reflected to this object.
Value for this object can be change only when value of
cLApGlobalTcpMss is set as 0."
::= { cLApEntry 35 }
cLApDataEncryptionStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the data encryption
status of AP.
A value of 'true' indicates data is encrypted between
AP and WLC.
A value of 'false' indicates data is plain text between
AP and WLC."
DEFVAL { false }
::= { cLApEntry 36 }
cLApNsiKey OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the network spectrum interface key
used when the AP is in spectrum expert Only monitor mode
(SOMM).This object returns a non-zero value only when the
AP is SOMM mode."
::= { cLApEntry 37 }
cLApAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the admin state of the AP,
A value of 'true' indicates AP admin status is up.
A value of 'false' indicates AP admin status is down."
DEFVAL { false }
::= { cLApEntry 38 }
cLApPortNumber OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the port number on which
the AP's traffic is coming through."
::= { cLApEntry 39 }
cLApRetransmitCount OBJECT-TYPE
SYNTAX Unsigned32
UNITS "retries"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the retransmission count for the access
point control packet.This value specifies the number of packets
retransmitted after which the Access Point falls back to another
controller in case of failover.
The global retransmit parameters are applicable for all access
points within a controller. The individual paramters per access
point, if configured takes precedence over the global values.
If an access point falls back from another controller(in case of
failover), the values at the AP level has more precedence over
the global values in the controller with which it has joined."
::= { cLApEntry 40 }
cLApRetransmitTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the retransmission timeout for the access
point control packet. This value specifies the timeout for each
retransmission, during the fallback of access point to another
controller in case of failover.
The global retransmit parameters are applicable for all access
points within a controller. The individual paramters per access
point, if configured takes precedence over the global values.
If an access point falls back from another controller(in case of
failover), the values at the AP level has more precedence over
the global values in the controller with which it has joined."
::= { cLApEntry 41 }
cLApVenueConfigVenueGroup OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
assembly(2),
business(3),
educational(4),
factoryAndIndustrial(5),
institutional(6),
mercantile(7),
residential(8),
storage(9),
utilityAndMisc(10),
vehicular(11),
outdoor(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the venue group
for this WLAN."
DEFVAL { unspecified }
::= { cLApEntry 42 }
cLApVenueConfigVenueType OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
unspecifiedAssembly(2),
arena(3),
stadium(4),
passengerTerminal(5),
amphitheater(6),
amusementPark(7),
placeOfWorship(8),
conventionCenter(9),
library(10),
museum(11),
restaurant(12),
theater(13),
bar(14),
coffeeShop(15),
zooOrAquarium(16),
emergencyCoordinationCenter(17),
unspecifiedBusiness(18),
doctorOrDentistOffice(19),
bank(20),
fireStation(21),
policeStation(22),
postOffice(23),
professionalOffice(24),
researchAndDevelopmentFacility(25),
attorneyOffice(26),
unspecifiedEducational(27),
schoolPrimary(28),
schoolSecondary(29),
universityOrCollege(30),
unspecifiedFactoryAndIndustrial(31),
factory(32),
unspecifiedInstitutional(33),
hospital(34),
longTermCareFacility(35),
alcoholAndDrugRehabilitationCenter(36),
groupHome(37),
prisonOrJail(38),
unspecifiedMercantile(39),
retailStore(40),
groceryMarket(41),
atomotiveServiceStation(42),
shoppingMall(43),
gasStation(44),
unspecifiedResidential(45),
privateResidence(46),
hotelOrMotel(47),
dormitory(48),
boardingHouse(49),
unspecifiedStorage(50),
unspecifiedUtility(51),
unspecifiedVehicular(52),
automobileOrTruck(53),
airplane(54),
bus(55),
ferry(56),
shipOrBoat(57),
train(58),
motorBike(59),
unspecifiedOutdoor(60),
muniMeshNetwork(61),
cityPark(62),
restArea(63),
trafficControl(64),
busStop(65),
kiosk(66)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the venue type within
a particular venue group,for this WLAN.
The venue group-venue type relationship is per
the following table:
Venue Group Venue Type Code Venue Description
=========== =============== =================
0 0 Unspecified
0 1-255 Reserved
1 0 Unspecified Assembly
1 1 Arena
1 2 Stadium
1 3 Passenger Terminal (e.g.,
airport, port, bus station, ferry
terminal, train station)
1 4 Amphitheater
1 5 Amusement Park
1 6 Place of Worship
1 7 Convention Center
1 8 Library
1 9 Museum
1 10 Restaurant
1 11 Theater
1 12 Bar
1 13 Coffee Shop
1 14 Zoo or Aquarium
1 15 Emergency Coordination Center
1 16-255 Reserved
2 0 Unspecified Business
2 1 Doctor or Dentist office
2 2 Bank
2 3 Fire Station
2 4 Police Station
2 6 Post Office
2 7 Professional Office
2 8 Research and Development Facility
2 9 Attorney Office
2 10-255 Reserved
3 0 Unspecified Educational
3 1 School, Primary
3 2 School, Secondary
3 3 University or College
3 4-255 Reserved
4 0 Unspecified Factory and Industrial
4 1 Factory
4 2-255 Reserved
5 0 Unspecified Institutional
5 1 Hospital
5 2 Long-Term Care Facility (e.g.,
Nursing home, Hospice, etc.)
5 3 Alcohol and Drug Re-habilitation
Center
5 4 Group Home
5 5 Prison or Jail
5 6-255 Reserved
6 0 Unspecified Mercantile
6 1 Retail Store
6 2 Grocery Market
6 3 Automotive Service Station
6 4-255 Reserved
7 0 Unspecified Residential
7 1 Hotel or Motel
7 2 Dormitory
7 3 Boarding House
7 4-255 Reserved
8 0-255 Reserved
9 0-255 Reserved
10 0 Unspecified Vehicular
10 1 Automobile or Truck
10 2 Airplane
10 3 Bus
10 4 Ferry
10 5 Ship or Boat
10 6 Train
10 7-255 Reserved
11 0 Unspecified Outdoor
11 1 Muni-mesh Network
11 2 City Park
11 3-255 Reserved"
DEFVAL { unspecified }
::= { cLApEntry 43 }
cLApVenueConfigVenueName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the venue name defined for this AP
group."
::= { cLApEntry 44 }
cLApVenueConfigLanguage OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the language defined for this AP group."
::= { cLApEntry 45 }
cLApLEDState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the LED state of this access
point should be enabled or disabled.
A value of 'true' indicates LED status is enabled.
A value of 'false' indicates LED status is disabled."
::= { cLApEntry 46 }
cLApTrunkVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the trunk VLAN ID
assigned to this AP's ethernet interface.
When a non-zero value is assigned for this
Object, the management packets will be
tagged with this VLAN ID. When the value of
trunk VLAN ID is zero, the packets will be untagged"
::= { cLApEntry 47 }
cLApTrunkVlanStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the trunk VLAN ID
assigned to this AP's is effective. If the AP is unable
to route the management frames through the trunk
vlan, it will revert back to untagged mode. A value of
true indicates that the configured trunk VLAN has taken
effect and a value of false indicates that the management
packets will be untagged"
::= { cLApEntry 48 }
cLApLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the user specified location of this AP.
While configuring AP, user should specify a location for
the AP so that its easy to figure out for some one where
the AP is located."
::= { cLApEntry 49 }
cLApSubMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
wips(2),
pppoe(3),
pppoeWips(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the sub mode of the AP.
The option 'wips' applies only when the
AP is in local, flexConnect or monitor mode.
This 'pppoe' options apply only when the
AP is in flexConnect mode."
DEFVAL { none }
::= { cLApEntry 50 }
cLApAssocCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the association count for the access
point. This counter includes both successful and failed
associate attempts, but does NOT include the re-associate
attempts."
::= { cLApEntry 51 }
cLApAssocFailResourceCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the association failure count for the
access point due to the resource limits, i.e. the max clients
of the WLAN/Radio is reached."
::= { cLApEntry 52 }
cLApRealTimeStatsModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether current stats mode is
'realtime'. There are two stats-mode, realtime and normal which
specifies the stats-timer range to be 10-180 sec and 2-5 sec
each.
A value of 'true' indicates current mode is realtime.
A value of 'false' indicates current mode is not realtime."
DEFVAL { false }
::= { cLApEntry 53 }
cLApAssociatedClientCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the associated client number for the
access point."
::= { cLApEntry 54 }
cLApMemoryCurrentUsage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the percent of current memory usage
of the access point."
::= { cLApEntry 55 }
cLApMemoryAverageUsage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the percent of average memory usage
of the access point. The statistics window is defined by
clsSysStatisticsInterval."
::= { cLApEntry 56 }
cLApCpuCurrentUsage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the percent of current CPU usage
of the access point."
::= { cLApEntry 57 }
cLApCpuAverageUsage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the percent of average CPU usage
of the access point. The statistics window is defined by
clsSysStatisticsInterval."
::= { cLApEntry 58 }
cLApUpgradeFromVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP image upgrade
from version."
::= { cLApEntry 59 }
cLApUpgradeToVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP image upgrade
to version."
::= { cLApEntry 60 }
cLApUpgradeFailureCause OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the cause of the
AP image upgrade failure."
::= { cLApEntry 61 }
cLApMaxClientLimitNumberTrap OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the max client limit number."
::= { cLApEntry 62 }
cLApMaxClientLimitCause OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the cause of the
max client limit reach."
::= { cLApEntry 63 }
cLApMaxClientLimitSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether this event is
raised or cleared.
A value of 'true' indicates this event is set.
A value of 'false' indicates this even is cleared."
::= { cLApEntry 64 }
cLApFloorLabel OBJECT-TYPE
SYNTAX Unsigned64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the floor label for the Access Point."
::= { cLApEntry 65 }
cLApConnectCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Count of AP's that are connected
to the Controller."
::= { cLApEntry 66 }
cLApReassocSuccCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the successful re-association
count for the Access Point."
::= { cLApEntry 67 }
cLApReassocFailCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the failed re-association
count for the Access Point."
::= { cLApEntry 68 }
cLAdjChannelRogueEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies if rogue AP
detection and removed Traps need to be sent.
A value of 'true' indicates adjacent rogue detection
is enabled.
A value of 'false' indicates adjacent rogue detection
is disabled.
To Enable this trap it is requested to disable the
bsnRogueAPTrapEnable in order to avoid the duplicates."
::= { cLApEntry 69 }
cLApAssocFailCountByRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the failed association
count for the access point caused by rate mismatch."
::= { cLApEntry 70 }
cLApAbnormalOfflineCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the abnormal offline count for the
access point."
::= { cLApEntry 71 }
cLApActiveClientCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the active client number for the access
point."
::= { cLApEntry 72 }
cLApAssocFailCountForRssiLow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the failed association
count for the access point caused by RSSI low."
::= { cLApEntry 73 }
cLApSysNetId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ApSysNetId which is the numeric
string to identify the system information like ApName."
::= { cLApEntry 74 }
cLApAssocFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the counts of client failed association
to the access point."
::= { cLApEntry 75 }
cLApAntennaBandMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(1),
single(2),
dual(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the mode of antenna band.
notApplicable - will return for unsuppported APs.
single - configure the AP to use single band for antenna.
dual - configure the AP to use both bands for antenna."
::= { cLApEntry 76 }
cLApHeartBeatRspAvgTime OBJECT-TYPE
SYNTAX Integer32 (1..100000)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the average interval between sending
the echo request and receiving the echo response in AP."
::= { cLApEntry 77 }
cLApEchoRequestCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the echo request packet
count sent from AP to access controller."
::= { cLApEntry 78 }
cLApEchoResponseLossCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the echo response loss
count from access controller to AP."
::= { cLApEntry 79 }
cLApModuleInserted OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the type of the module
inserted in to the AP."
::= { cLApEntry 80 }
cLApEnableModule OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of the external
module .
A value of 'true' indicates module is enabled.
A value of 'false' indicates module is disabled."
::= { cLApEntry 81 }
cLApIsUniversal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the if the AP is
universal AP.
A value of 'true' indicates AP is universal SKU based AP.
A value of 'false' indicates AP is non-Universal SKU AP."
::= { cLApEntry 82 }
cLApUniversalPrimeStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the method of Priming
of the Universal AP."
::= { cLApEntry 83 }
cLApIsMaster OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether the flex AP is a
master AP. This applies only to FlexExpress controllers.
A value of 'true' indicates AP is a master AP.
A value of 'false' indicates AP is not a master AP."
::= { cLApEntry 84 }
cLApBleFWDownloadStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the list of APs in which BLE
firmware download is in progress.
A value of 'true' indicates BLE download is in progress.
A value of 'false' indicates BLE download is not in progress."
::= { cLApEntry 85 }
cLApDot11XorDartConnectorStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the XOR dart connector status."
::= { cLApEntry 86 }
cLApCtsSxpDefaultPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the SXP(Security Group Tag Exchange
Protocol) default password."
DEFVAL { "" }
::= { cLApEntry 87 }
cLApCtsSxpState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) state.
A value of 'true' indicates sxp state is enabled.
A value of 'false' indicates sxp state is disabled."
DEFVAL { false }
::= { cLApEntry 88 }
cLApCtsSxpMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) mode.
A value of 'true' indicates sxp mode is enabled.
A value of 'false' indicates sxp mode is disabled."
DEFVAL { false }
::= { cLApEntry 89 }
cLApCtsSxpListenerMinHoldtime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) listener hold time.
It specifies the global maximum hold-time for
SXP connections in 'listener' mode.
Value of this object must be lesser than
cLApCtsSxpListenerMinHoldTime."
DEFVAL { 90 }
::= { cLApEntry 90 }
cLApCtsSxpListenerMaxHoldtime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) listener hold time.
It specifies the global maximum hold-time for
SXP connections in 'listener' mode.
Value of this object must be greater than
cLApCtsSxpListenerMinHoldTime."
DEFVAL { 180 }
::= { cLApEntry 91 }
cLApCtsSxpReconcilePeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) reconcile period."
DEFVAL { 120 }
::= { cLApEntry 92 }
cLApCtsSxpRetryPeriod OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) retry period."
DEFVAL { 120 }
::= { cLApEntry 93 }
cLApCtsSxpSpeakerHoldTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) speaker hold time."
DEFVAL { 120 }
::= { cLApEntry 94 }
cLApCtsSxpSpeakerKeepAlive OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies SXP(Security Group Tag Exchange
Protocol) speaker keep alive time."
DEFVAL { 0 }
::= { cLApEntry 95 }
cLApCtsInlineTagStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Cisco Trustsec inline tagging
is enabled/disabled.
A value 'true' indicates inline tag is enabled.
A value 'false' indicates inline tag is disabled."
DEFVAL { false }
::= { cLApEntry 96 }
cLApCtsSgaclStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Cisco Trustsec Security Group Tag
ACL enforcement status.
A value 'true' indicates SgACL enforcement is enabled
A value 'false' indicates SgACL enforcement is disabled"
DEFVAL { false }
::= { cLApEntry 97 }
cLApCtsOverrideStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Cisco Trustsec AP Override status.
A value of 'true' indicates CTS AP Override is enabled.
A value of 'false' indicates CTS AP Override is disabled."
DEFVAL { false }
::= { cLApEntry 98 }
cLApModeClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to clear the modes like 'Sniffer',
'Monitor' which is not inherited from tag configuration on
controller. Once cleared, AP may reboot and move to the AP mode
based on current tag configuration.
A value of 'true' indicates AP mode is cleared
A value of 'false' indicates AP mode is set"
::= { cLApEntry 103 }
cLApSiteTagName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the site tag name of the AP"
::= { cLApEntry 104 }
cLApRfTagName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the RF tag name of the AP"
::= { cLApEntry 105 }
cLApPolicyTagName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the policy tag name of the AP."
::= { cLApEntry 106 }
cLApTagSource OBJECT-TYPE
SYNTAX INTEGER {
none(1),
static(2),
filterengine(3),
pnpserver(4),
default(5),
location(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the source of the tag."
::= { cLApEntry 107 }
cLApUsbModuleName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..66))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies module name of USB module
On the AP."
::= { cLApEntry 108 }
cLApUsbModuleState OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..66))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether USB module detected or not
detected on the AP."
::= { cLApEntry 109 }
cLApUsbModuleProductId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..19))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies product Id of USB module on the AP."
::= { cLApEntry 110 }
cLApUsbDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..66))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies description of USB module on the AP."
::= { cLApEntry 111 }
cLApUsbStateInfo OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies State(enable/disable) of USB module
on the AP."
::= { cLApEntry 112 }
cLApUsbOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Override(enable/disable) of USB module
on the AP."
::= { cLApEntry 113 }
cLApUsbSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies serial number of USB module
on the AP."
::= { cLApEntry 114 }
cLApUsbMaxPower OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies max power given to USB module
on the AP."
::= { cLApEntry 115 }
-- ********************************************************************
-- * AP Dot11 Interface Information
-- ********************************************************************
cLApDot11IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
basic functional parameters corresponding to
the dot11 interfaces of the APs that have joined
the controller."
::= { ciscoLwappApIf 1 }
cLApDot11IfEntry OBJECT-TYPE
SYNTAX CLApDot11IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the 802.11
functional parameters of the dot11 interface of
an AP that has joined the controller.
Entries are added when the APs associate to this
controller and deleted when they lose their
association."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId
}
::= { cLApDot11IfTable 1 }
CLApDot11IfEntry ::= SEQUENCE {
cLApDot11IfSlotId Unsigned32,
cLApDot11IfType CLApIfType,
cLApDot11IfRegDomain SnmpAdminString,
cLApDot11nSupport TruthValue,
cLAp11nChannelBandwidth INTEGER,
cLApLomEnabled TruthValue,
cLApLomFirstChannel CLDot11Channel,
cLApLomSecondChannel CLDot11Channel,
cLApLomThirdChannel CLDot11Channel,
cLApLomFourthChannel CLDot11Channel,
cLApExtensionChannel CLDot11Channel,
cLApLegacyBeamForming INTEGER,
cLApCdpOverAirEnabled TruthValue,
cLApDot11IfAdminStatus TruthValue,
cLApDot11IfLinkChangeCount Unsigned32,
cLApDot11MaxClients Unsigned32,
cLApPromiscuousModeDwelling Unsigned32,
cLApDot11IfStaKeepingTime TimeTicks,
cLApDot11IfLinkSpeed Gauge32,
cLApDot11IfMtu Unsigned32,
cLApDot11IfDesc SnmpAdminString,
cLApDot11acSupport TruthValue,
cLAp11ChannelBandwidth INTEGER,
cLApExtensionChannels SnmpAdminString,
cLAPDot11IfMinTxPowerStep Unsigned32,
cLApDot11XorRadioMode INTEGER,
cLApDot11XorRadioBand INTEGER,
cLApDot11XorRadioRoleAssignment INTEGER,
cLApDot11IfMaxDataRate Unsigned32,
cLApDot11IfSensorReachability Unsigned32,
cLApDot11axSupport TruthValue,
cLApFraCoverageOverlapFactor Integer32,
cLApFraSuggestedMode INTEGER
}
cLApDot11IfSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the slot ID of a dot11
interface on an AP.
The slot ID for a particular dot11 interface as
represented by this object ranges from 0 to
cLApMaxNumberOfDot11Slots - 1."
::= { cLApDot11IfEntry 1 }
cLApDot11IfType OBJECT-TYPE
SYNTAX CLApIfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the type of this dot11
interface."
::= { cLApDot11IfEntry 2 }
cLApDot11IfRegDomain OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the regulatory domain for
this radio type on this AP."
::= { cLApDot11IfEntry 3 }
cLApDot11nSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents whether 11n support is enabled
on this radio.
A value of 'true' indicates 11n support is enabled.
A value of 'false' indicates 11n support is disabled."
::= { cLApDot11IfEntry 4 }
cLAp11nChannelBandwidth OBJECT-TYPE
SYNTAX INTEGER {
five(1),
ten(2),
twenty(3),
forty(4)
}
UNITS "mhz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the channel bandwidth for
this AP. This applies to 802.11n networks only.
This has been deprecated for cLAp11ChannelBandwidth."
::= { cLApDot11IfEntry 5 }
cLApLomEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object indicates whether this AP is being monitored
by the location server. A value of 'true' indicates that
the monitoring is enabled. A value of 'false' indicates
that the monitoring is disabled."
DEFVAL { false }
::= { cLApDot11IfEntry 6 }
cLApLomFirstChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the first location channel that is
being monitored."
::= { cLApDot11IfEntry 7 }
cLApLomSecondChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the second location channel that
is being monitored."
::= { cLApDot11IfEntry 8 }
cLApLomThirdChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the third location
channel that is being monitored."
::= { cLApDot11IfEntry 9 }
cLApLomFourthChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the fourth location
channel that is being monitored."
::= { cLApDot11IfEntry 10 }
cLApExtensionChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies the extension channel. This is
applicable when the channel bandwidth is set to 40mhz."
::= { cLApDot11IfEntry 11 }
cLApLegacyBeamForming OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the status of legacy beam forming
in this AP. This object is applicable only for
11n supported APs.
For APs that does not support legacy beam forming,
a get request on this attribute will return
the value 'notApplicable'.
A value of 'enable' indicates that the legacy
Beam forming is enabled in this AP.
A value of 'false' indicates that the legacy
Beam forming is disabled in this AP."
DEFVAL { notApplicable }
::= { cLApDot11IfEntry 12 }
cLApCdpOverAirEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of Cisco Discovery
Protocol(CDP) in this interface, represented by
cLApDot11IfSlotId of the AP, represented by
cLApSysMacAddress.
A value of 'true' indicates that CDP is enabled in
the dot11 interface(s) of this AP.
A value of 'false' indicates that CDP is disabled in
the dot11 interface(s) of this AP."
::= { cLApDot11IfEntry 13 }
cLApDot11IfAdminStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP's interface admin
status.
A value of 'true' indicates admin state is up.
A value of 'false' indicates admin state is down."
::= { cLApDot11IfEntry 14 }
cLApDot11IfLinkChangeCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the link change count of a dot11
interface on an AP."
::= { cLApDot11IfEntry 15 }
cLApDot11MaxClients OBJECT-TYPE
SYNTAX Unsigned32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the max supported associated clients
of a dot11 interface on an AP."
DEFVAL { 200 }
::= { cLApDot11IfEntry 16 }
cLApPromiscuousModeDwelling OBJECT-TYPE
SYNTAX Unsigned32
UNITS "percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the percentage of time for the dot11
interface of an Access Point spent in promiscuous mode
dwelling."
::= { cLApDot11IfEntry 17 }
cLApDot11IfStaKeepingTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time in hundredths
of a second since the last dot11 interface state changed."
::= { cLApDot11IfEntry 18 }
cLApDot11IfLinkSpeed OBJECT-TYPE
SYNTAX Gauge32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the speed of the interface
in units of 1,000,000 bits per second."
::= { cLApDot11IfEntry 19 }
cLApDot11IfMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents interface's MTU value."
::= { cLApDot11IfEntry 20 }
cLApDot11IfDesc OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the description of this interface."
::= { cLApDot11IfEntry 21 }
cLApDot11acSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents whether 802.11ac support is
enabled on this AP.
A value of 'true' indicates 11ac support for slot is
enabled.
A value of 'false' indicates 11ac support for slot is
disabled."
::= { cLApDot11IfEntry 22 }
cLAp11ChannelBandwidth OBJECT-TYPE
SYNTAX INTEGER {
five(1),
ten(2),
twenty(3),
fourty(4),
eighty(5),
onesixty(6)
}
UNITS "mhz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the channel bandwidth for
this AP. This applies to 802.11n and 802.11ac networks only."
::= { cLApDot11IfEntry 23 }
cLApExtensionChannels OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the extension channels separated by
commas. This is applicable when the channel bandwidth is set
to 40mhz or 80mhz."
::= { cLApDot11IfEntry 24 }
cLAPDot11IfMinTxPowerStep OBJECT-TYPE
SYNTAX Unsigned32
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents minimum adjust step of the AP radio TX
power. The power step is coded as an unsigned integer in units
of dbm."
::= { cLApDot11IfEntry 25 }
cLApDot11XorRadioMode OBJECT-TYPE
SYNTAX INTEGER {
servingClients(1),
monitor(2),
sensor(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the radio mode for
the AP which has XOR radio.
servingClients - xor radio is configured to
serve the clients (local/flexconnect/bridge).
monitor -xor radio is configured to operate in
monitor mode.
sensor - xor radio is configured to operate in sensor
mode."
::= { cLApDot11IfEntry 26 }
cLApDot11XorRadioBand OBJECT-TYPE
SYNTAX INTEGER {
radioband24G(1),
radioband5G(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the operating band of
XOR radio.
radioband24G - operating band for xor radio is 2.4GHz.
radioband5G - operating band for xor radio is 5GHz."
::= { cLApDot11IfEntry 27 }
cLApDot11XorRadioRoleAssignment OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the radio role assignment of
XOR radio.
auto - xor radio configured to change band/mode automatically.
manual - xor radio's band/mode can be configured manually."
::= { cLApDot11IfEntry 28 }
cLApDot11IfMaxDataRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum data rate of a dot11
interface on an AP in Mbps."
::= { cLApDot11IfEntry 29 }
cLApDot11IfSensorReachability OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents sensor radio's ability to cover
localized RF neighbors.It represents value in percentage
which shows percentage of neighbors covered by this sensor."
::= { cLApDot11IfEntry 30 }
cLApDot11axSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects represents whether 802.11ax support is
enabled on this AP.
A value of 'true' indicates 11ax support for slot is
enabled.
A value of 'false' indicates 11ax support for slot is
disabled."
::= { cLApDot11IfEntry 31 }
cLApFraCoverageOverlapFactor OBJECT-TYPE
SYNTAX Integer32
UNITS "percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the COF(Coverage Overlap Factor) in
percentage.COF represents overlap on a given radio's transmit
cell size by its adjacent neighbors.When COF value is higher
than FRA(Flexible Radio Assignment) sensitivity, given radio
will be most likely marked as redundant by FRA algorithm."
::= { cLApDot11IfEntry 32 }
cLApFraSuggestedMode OBJECT-TYPE
SYNTAX INTEGER {
static(1),
none(2),
radioBand5GMonitor(3),
radioBand24G(4),
notApplicable(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the band/mode XOR radio can move to,
for better performance.
static - XOR radio's band/mode is in manual assignment.
none - FRA(Flexible Radio Assignment) algorithm is disabled.
radioBand5GMonitor - FRA suggested mode/band is 5GHz or Monitor role.
radioBand24G - XOR radio is not redundant.
notApplicable - Radio is not XOR."
::= { cLApDot11IfEntry 33 }
-- ********************************************************************
-- * AP Ethernet Interface Information
-- ********************************************************************
cLApEthernetIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApEthernetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
basic functional parameters corresponding to
the Ethernet interfaces of the APs that have joined
the controller."
::= { ciscoLwappApIf 2 }
cLApEthernetIfEntry OBJECT-TYPE
SYNTAX CLApEthernetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the functional
parameters of the Ethernet interface of an AP that
has joined the controller.
Entries are added when the APs associate to this
controller and deleted when they lose their
association."
INDEX {
cLApSysMacAddress,
cLApEthernetIfSlotId
}
::= { cLApEthernetIfTable 1 }
CLApEthernetIfEntry ::= SEQUENCE {
cLApEthernetIfSlotId Unsigned32,
cLApEthernetIfName SnmpAdminString,
cLApEthernetIfMacAddress MacAddress,
cLApEthernetIfAdminStatus INTEGER,
cLApEthernetIfOperStatus INTEGER,
cLApEthernetIfRxUcastPkts Counter32,
cLApEthernetIfRxNUcastPkts Counter32,
cLApEthernetIfTxUcastPkts Counter32,
cLApEthernetIfTxNUcastPkts Counter32,
cLApEthernetIfDuplex INTEGER,
cLApEthernetIfLinkSpeed Gauge32,
cLApEthernetIfPOEPower INTEGER,
cLApEthernetIfRxTotalBytes Counter32,
cLApEthernetIfTxTotalBytes Counter32,
cLApEthernetIfInputCrc Counter32,
cLApEthernetIfInputAborts Counter32,
cLApEthernetIfInputErrors Counter32,
cLApEthernetIfInputFrames Counter32,
cLApEthernetIfInputOverrun Counter32,
cLApEthernetIfInputDrops Counter32,
cLApEthernetIfInputResource Counter32,
cLApEthernetIfUnknownProtocol Counter32,
cLApEthernetIfRunts Counter32,
cLApEthernetIfGiants Counter32,
cLApEthernetIfThrottle Counter32,
cLApEthernetIfResets Counter32,
cLApEthernetIfOutputCollision Counter32,
cLApEthernetIfOutputNoBuffer Counter32,
cLApEthernetIfOutputResource Counter32,
cLApEthernetIfOutputUnderrun Counter32,
cLApEthernetIfOutputErrors Counter32,
cLApEthernetIfOutputTotalDrops Counter32,
cLApEthernetIfCdpEnabled TruthValue,
cLApEthernetIfMtu Unsigned32,
cLApEthernetIfType IANAifType,
cLApEthernetIfLinkChangeCount Counter32
}
cLApEthernetIfSlotId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the slot ID of an Ethernet
interface on an AP.
The slot ID for a particular Ethernet interface as
represented by this object ranges from 0 to
cLApMaxNumberOfEthernetSlots - 1."
::= { cLApEthernetIfEntry 1 }
cLApEthernetIfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the name of the
ethernet interface."
::= { cLApEthernetIfEntry 2 }
cLApEthernetIfMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents MAC address of the ethernet
interface in the slot represented by
cLApEthernetIfSlotId."
::= { cLApEthernetIfEntry 3 }
cLApEthernetIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the admin state of the physical
ethernet interface on the AP.
up - Admin state of ethernet interface is up.
down - Admin state of ethernet interface is down."
::= { cLApEthernetIfEntry 4 }
cLApEthernetIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the operational state
of the physical Ethernet interface on the AP.
up - Operational state of ethernet interface is up.
down - Operational state of ethernet interface is down."
::= { cLApEthernetIfEntry 5 }
cLApEthernetIfRxUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of unicast packets
received on the interface."
::= { cLApEthernetIfEntry 6 }
cLApEthernetIfRxNUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of non-unicast or
multicast packets received on the interface"
::= { cLApEthernetIfEntry 7 }
cLApEthernetIfTxUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of unicast packets
transmitted on the interface."
::= { cLApEthernetIfEntry 8 }
cLApEthernetIfTxNUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of non-unicast or
multicast packets transmitted on the interface"
::= { cLApEthernetIfEntry 9 }
cLApEthernetIfDuplex OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
halfduplex(2),
fullduplex(3),
auto(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the interface's duplex mode"
::= { cLApEthernetIfEntry 10 }
cLApEthernetIfLinkSpeed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the speed of the interface in units of
1,000,000 bits per second"
::= { cLApEthernetIfEntry 11 }
cLApEthernetIfPOEPower OBJECT-TYPE
SYNTAX INTEGER {
none(1),
drawn(2),
notdrawn(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether this interface supports
Power Over Ethernet (POE)
none - POE is not supported
drawn - This interface supports POE, and power is
being drawn
notdrawn - POE power is not drawn"
::= { cLApEthernetIfEntry 12 }
cLApEthernetIfRxTotalBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of bytes in the
error-free packets received on the interface."
::= { cLApEthernetIfEntry 13 }
cLApEthernetIfTxTotalBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of bytes in the
error-free packets transmitted on the interface."
::= { cLApEthernetIfEntry 14 }
cLApEthernetIfInputCrc OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of CRC error in
packets received on the interface."
::= { cLApEthernetIfEntry 15 }
cLApEthernetIfInputAborts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packet aborted
while receiving on the interface."
::= { cLApEthernetIfEntry 16 }
cLApEthernetIfInputErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the sum of all errors in the packets
while receiving on the interface."
::= { cLApEthernetIfEntry 17 }
cLApEthernetIfInputFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packet received
incorrectly having a CRC error and a noninteger number
of octets on the interface."
::= { cLApEthernetIfEntry 18 }
cLApEthernetIfInputOverrun OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of times the receiver
hardware was incapable of handing received data to a
hardware buffer because the input rate exceeded the
receiver's capability to handle the data."
::= { cLApEthernetIfEntry 19 }
cLApEthernetIfInputDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packets dropped
while receiving on the interface because the queue
was full."
::= { cLApEthernetIfEntry 20 }
cLApEthernetIfInputResource OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of resource errors in
packets received on the interface."
::= { cLApEthernetIfEntry 21 }
cLApEthernetIfUnknownProtocol OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packet discarded on
the interface due to unknown protocol."
::= { cLApEthernetIfEntry 22 }
cLApEthernetIfRunts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of packets that
are discarded because they are smaller than the
medium's minimum packet size."
::= { cLApEthernetIfEntry 23 }
cLApEthernetIfGiants OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of packets that
are discarded because they exceed the medium's
maximum packet size."
::= { cLApEthernetIfEntry 24 }
cLApEthernetIfThrottle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of times the
interface advised a sending NIC that it was
overwhelmed by packets being sent and to slow the
pace of delivery."
::= { cLApEthernetIfEntry 25 }
cLApEthernetIfResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents number of times that an
interface has been completely reset."
::= { cLApEthernetIfEntry 26 }
cLApEthernetIfOutputCollision OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packet
retransmitted due to an Ethernet collision."
::= { cLApEthernetIfEntry 27 }
cLApEthernetIfOutputNoBuffer OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packets discarded
because there was no buffer space."
::= { cLApEthernetIfEntry 28 }
cLApEthernetIfOutputResource OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of resource
errors in packets transmitted on the interface."
::= { cLApEthernetIfEntry 29 }
cLApEthernetIfOutputUnderrun OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of times the transmitter
has been running faster than the router can handle."
::= { cLApEthernetIfEntry 30 }
cLApEthernetIfOutputErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents sum of all errors that prevented
the final transmission of packets out of the interface."
::= { cLApEthernetIfEntry 31 }
cLApEthernetIfOutputTotalDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of packets dropped
while transmitting from the interface because the queue
was full."
::= { cLApEthernetIfEntry 32 }
cLApEthernetIfCdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of Cisco Discovery
Protocol(CDP) in this interface represented by
cLApEthernetIfSlotId of the AP represented by
cLApSysMacAddress.
A value of 'true' indicates that CDP is enabled in
this interface.
A value of 'false' indicates that CDP is disabled in
this interface."
DEFVAL { true }
::= { cLApEthernetIfEntry 33 }
cLApEthernetIfMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents interface's MTU value"
::= { cLApEthernetIfEntry 34 }
cLApEthernetIfType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the type of interface. Additional
values for ifType are assigned by the Internet Assigned Numbers
Authority (IANA), through updating the syntax of the
IANAifType textual convention."
::= { cLApEthernetIfEntry 35 }
cLApEthernetIfLinkChangeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the link change count of
ethernet interface on the AP."
::= { cLApEthernetIfEntry 36 }
-- ********************************************************************
-- * AP Dot11 radio Information
-- ********************************************************************
cLApDot11RadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11RadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
basic functional parameters of the radios of the
APs that have joined the controller."
::= { ciscoLwappApIf 3 }
cLApDot11RadioEntry OBJECT-TYPE
SYNTAX CLApDot11RadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the 802.11
functional parameters of the radio of
an AP that has joined the controller.
Entries are added when the APs associate to this
controller and deleted when they lose their
association."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId
}
::= { cLApDot11RadioTable 1 }
CLApDot11RadioEntry ::= SEQUENCE {
cLApDot11RadioMACAddress MacAddress,
cLApDot11RadioSubBand CLApDot11RadioSubband,
cLApDot11RadioVersion SnmpAdminString,
cLApDot11IsBackhaul TruthValue,
cLApDot11RadioRole CLApDot11RadioRole,
cLApDot11RadioMode INTEGER,
cLApDot11RadioSubType INTEGER
}
cLApDot11RadioMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the base Mac address of
the radio."
::= { cLApDot11RadioEntry 1 }
cLApDot11RadioSubBand OBJECT-TYPE
SYNTAX CLApDot11RadioSubband
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reprsents the sub band on which
this radio operates."
::= { cLApDot11RadioEntry 2 }
cLApDot11RadioVersion OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the firmware version
of the radio."
::= { cLApDot11RadioEntry 3 }
cLApDot11IsBackhaul OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether this interface
is backhaul radio or not.
A value of 'true' indicates backhaul access for radio is
enabled. A value of 'false' indicates backhaul access for
radio is disabled."
::= { cLApDot11RadioEntry 4 }
cLApDot11RadioRole OBJECT-TYPE
SYNTAX CLApDot11RadioRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the role of the radio."
::= { cLApDot11RadioEntry 5 }
cLApDot11RadioMode OBJECT-TYPE
SYNTAX INTEGER {
local(1),
monitor(2),
remote(3),
rogueDetector(4),
sniffer(5),
bridge(6),
seConnect(7),
hybridRemote(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the mode of the radio.
local(1) : The default option. Serving WLAN
clients and scanning channels for threats.
monitor(2) : A monitor mode. AP spends all of its
cycles scanning channels and looking
for rogues.
remote(3) : This mode indicates that AP is a remote
edge lightweight access point.
rogueDetector(4) : This mode monitors the rogue APs on wire.
It does not transmit or receive frames
over the air or contain rogue APs.
sniffer(5) : The access point starts sniffing
the air on a given channel.
bridge(6) : This mode indicates that a root AP
is connected.
seConnect(7) : AP is connected to spectrum expert.
The AP is able to perform spectrum
intelligence.
hybridRemote(8) : A mode for branch office and
remote office deployment."
::= { cLApDot11RadioEntry 6 }
cLApDot11RadioSubType OBJECT-TYPE
SYNTAX INTEGER {
main(1),
rxOnly(2),
slaveAc(3),
remoteLan(4),
xorTxRx(5),
bleTxRx(6),
bleRxOnly(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the subtype of the radio.
main(1) :radio operates normally.
rxOnly(2) :NOS radio type,which is explicitely used
for monitor mode operation.
slaveAc(3) :x-ale radio type is only for local mode.
remoteLan(4) :Remote-LAN supported Slot.
xorTxRx(5) :Xor radio capable of both TX and RX.
bleTxRx(6) :radio operating normally and BLE is enabled for the AP.
bleRxOnly(7) :radio is explicitly used for monitor mode operation and BLE is enabled for the AP."
::= { cLApDot11RadioEntry 7 }
-- ********************************************************************
-- * Global AP Credentials
-- ********************************************************************
cLApCredentialGlobalUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the global username for
all the APs already joined or will join the controller.
This user name is used to access the console on the AP."
::= { ciscoLwappApCredentials 1 }
cLApCredentialGlobalPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the password corresponding to
the user name represented by cLApCredentialGlobalUserName
object."
::= { ciscoLwappApCredentials 2 }
cLApCredentialGlobalSecret OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the secret key for
all the APs already joined or will join the
controller. This provides read-write access
to the console on the AP."
::= { ciscoLwappApCredentials 3 }
-- ********************************************************************
-- * Per AP Credentials
-- ********************************************************************
cLApCredentialsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApCredentialsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the information about the credentials
of the 802.11 LWAPP Access Points that have joined the
controller. Rows are added to this table whenever, new APs
are joined to this controller, and rows are deleted
whenever APs gets disjoined from the controller."
::= { ciscoLwappApCredentials 4 }
cLApCredentialsEntry OBJECT-TYPE
SYNTAX CLApCredentialsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined the
controller. cLApSysMacAddress is the index which
uniquely identifies every row in the table."
INDEX { cLApSysMacAddress }
::= { cLApCredentialsTable 1 }
CLApCredentialsEntry ::= SEQUENCE {
cLApCredentialUserName SnmpAdminString,
cLApCredentialPassword SnmpAdminString,
cLApCredentialSecret SnmpAdminString,
cLApCredentialEnableGlobalCredentials TruthValue
}
cLApCredentialUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the username for
this AP."
::= { cLApCredentialsEntry 1 }
cLApCredentialPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the password corresponding to
user name represented by cLApCredentialUserName object."
::= { cLApCredentialsEntry 2 }
cLApCredentialSecret OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the secret key for
the specific AP. This provides the read-write access
on the console for this AP."
::= { cLApCredentialsEntry 3 }
cLApCredentialEnableGlobalCredentials OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the global credentials
for the AP is enabled or disabled.
A value of 'true' indicates the global username/password
to be used for this AP .
A value of 'false' indicates the global
credentials and uses the credentials specific for this
AP is disabled."
::= { cLApCredentialsEntry 4 }
-- ********************************************************************
-- * Link Latency parameters
-- ********************************************************************
cLApLinkLatencyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApLinkLatencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the link latency configuration
for each AP.
An entry is automatically added to this table when
an Access Points Joins controller.
Entry is removed from this table when AP
disassociates from the controllers."
::= { ciscoLwappLinkLatency 1 }
cLApLinkLatencyEntry OBJECT-TYPE
SYNTAX CLApLinkLatencyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides configuration
related to Link latency on each AP."
INDEX { cLApSysMacAddress }
::= { cLApLinkLatencyTable 1 }
CLApLinkLatencyEntry ::= SEQUENCE {
cLApLinkLatencyEnable TruthValue,
cLApLinkLatencyReset TruthValue
}
cLApLinkLatencyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to configure the Link
Latency on the AP.
A value of 'true' indicates that the Link Latency
is enabled.
A value of 'false' indicates that the Link Latency
is disabled."
DEFVAL { false }
::= { cLApLinkLatencyEntry 1 }
cLApLinkLatencyReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to reset the Link Latency
stored at controller for an AP.
A value of 'true' indicates that the Link Latency stats
is to be reset.
A value of 'false' on this during set will return error.
A value of false will be returned on get."
DEFVAL { false }
::= { cLApLinkLatencyEntry 2 }
-- ********************************************************************
-- * Link Latency Stats
-- ********************************************************************
cLApLinkLatencyStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApLinkLatencyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the link latency statistics
calculated for each AP.
An entry is automatically added by the controller
when a 'cLApLinkLatencyEnable' is enabled on an
Access Point. Entry is deleted when
'cLApLinkLatencyEnable' is disabled on the
Access Point."
::= { ciscoLwappLinkLatency 2 }
cLApLinkLatencyStatsEntry OBJECT-TYPE
SYNTAX CLApLinkLatencyStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides minimum, maximum
and average Link latency for a Access Point.
Entries are removed when the Link Latency is disabled
on a Access Point."
INDEX { cLApSysMacAddress }
::= { cLApLinkLatencyStatsTable 1 }
CLApLinkLatencyStatsEntry ::= SEQUENCE {
cLApLinkLatencyStatsCurrent TimeInterval,
cLApLinkLatencyStatsMin TimeInterval,
cLApLinkLatencyStatsMax TimeInterval,
cLApLinkLatencyTimeStamp TimeStamp,
cLApDataLinkLatencyStatsCurrent TimeInterval,
cLApDataLinkLatencyStatsMin TimeInterval,
cLApDataLinkLatencyStatsMax TimeInterval,
cLApDataLinkLatencyTimeStamp TimeStamp
}
cLApLinkLatencyStatsCurrent OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current Link latency recorded for
this Access point."
::= { cLApLinkLatencyStatsEntry 1 }
cLApLinkLatencyStatsMin OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the minimum Link latency recorded for
this Access point."
::= { cLApLinkLatencyStatsEntry 2 }
cLApLinkLatencyStatsMax OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum Link latency recorded for
this Access point."
::= { cLApLinkLatencyStatsEntry 3 }
cLApLinkLatencyTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the timestamp, when the values are
collected, as returned by the object 'cLApUpTime'."
::= { cLApLinkLatencyStatsEntry 4 }
cLApDataLinkLatencyStatsCurrent OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current Data Link latency recorded
for this Access point."
::= { cLApLinkLatencyStatsEntry 5 }
cLApDataLinkLatencyStatsMin OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the minimum Data Link latency recorded
for this Access point."
::= { cLApLinkLatencyStatsEntry 6 }
cLApDataLinkLatencyStatsMax OBJECT-TYPE
SYNTAX TimeInterval
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum Data Link latency recorded
for this Access point."
::= { cLApLinkLatencyStatsEntry 7 }
cLApDataLinkLatencyTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the timestamp, when the values are
collected, as returned by the object 'cLApUpTime'."
::= { cLApLinkLatencyStatsEntry 8 }
-- ********************************************************************
-- * AP LAN Stats.
-- ********************************************************************
cLAplanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLAplanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Saridinia AP LAN stats
information that have joined the controller."
::= { ciscoLwappAplanStats 1 }
cLAplanStatsEntry OBJECT-TYPE
SYNTAX CLAplanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains stats information of
LAN stats"
INDEX {
cLApSysMacAddress,
cLApLanPortId
}
::= { cLAplanStatsTable 1 }
CLAplanStatsEntry ::= SEQUENCE {
cLApLanPortId Integer32,
cLApLanPortState TruthValue,
cLApLanPortVlanId Unsigned32,
cLApLanPortVlanIdValid TruthValue,
cLApLanPoeState TruthValue
}
cLApLanPortId OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the ID of a LAN
port of an AP."
::= { cLAplanStatsEntry 1 }
cLApLanPortState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the state of an
ethernet interface of AP.
A value of 'true' indicates admin status of
ethernet interface is up.
A value of 'false' indicates admin status of
ethernet interface is down."
DEFVAL { false }
::= { cLAplanStatsEntry 2 }
cLApLanPortVlanId OBJECT-TYPE
SYNTAX Unsigned32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Vlan Id of
the ethernet interface. When the value is 0 ,
the VLAN access is disabled."
DEFVAL { 0 }
::= { cLAplanStatsEntry 3 }
cLApLanPortVlanIdValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents VLAN ID is valid or not
for an ethernet interface.
A value of 'true' indicates vlanId is valid.
A value of 'false' indicates vlanId is not valid."
DEFVAL { false }
::= { cLAplanStatsEntry 4 }
cLApLanPoeState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the LAN PoE Status of an
ethernet interface of an AP.
A value of 'true' indicates poe state is enabled for
ethernet interface.
A value of 'false' indicates poe state is disabled for
ethernet interface."
DEFVAL { false }
::= { cLAplanStatsEntry 5 }
cLAplanOverrideTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLAplanOverrideEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the lan override status of an AP"
::= { ciscoLwappAplanStats 2 }
cLAplanOverrideEntry OBJECT-TYPE
SYNTAX CLAplanOverrideEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains stats information of LAN override status"
INDEX { cLApSysMacAddress }
::= { cLAplanOverrideTable 1 }
CLAplanOverrideEntry ::= SEQUENCE {
cLApLanOverride TruthValue
}
cLApLanOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the LAN port override status of AP.
A value of 'true' indicates LAN override is enabled.
A value of 'false' indicates LAN override is disabled."
DEFVAL { false }
::= { cLAplanOverrideEntry 1 }
-- ********************************************************************
-- * AP WLAN Stats.
-- ********************************************************************
cLApWlanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApWlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Per-AP, Per-Radio, Per-SSID
Stats information of packets/bytes sent/received,
retransmission counter, associated clients counter,
etc."
::= { ciscoLwappApWlanStats 1 }
cLApWlanStatsEntry OBJECT-TYPE
SYNTAX CLApWlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains stats information of
packets/bytes sent/received, retransmission counter,
associated clients counter, and etc."
INDEX {
cLApSysMacAddress,
cLApDot11IfType,
cLWlanIndex
}
::= { cLApWlanStatsTable 1 }
CLApWlanStatsEntry ::= SEQUENCE {
cLApWlanStatsTxPktNum Counter64,
cLApWlanStatsTxOctetNum Counter64,
cLApWlanStatsRxPktNum Counter64,
cLApWlanStatsRxOctetNum Counter64,
cLApWlanStatsRetransmitNum Counter64,
cLApWlanStatsAssocClientNum Unsigned32,
cLApWlanStatsOnlineUserNum Unsigned32
}
cLApWlanStatsTxPktNum OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the transmitted packets counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 1 }
cLApWlanStatsTxOctetNum OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the transmitted bytes counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 2 }
cLApWlanStatsRxPktNum OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the received packets counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 3 }
cLApWlanStatsRxOctetNum OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the received bytes counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 4 }
cLApWlanStatsRetransmitNum OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the packet retransmission counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 5 }
cLApWlanStatsAssocClientNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the associated client counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 6 }
cLApWlanStatsOnlineUserNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the online user counter of
the specific radio and wlan on this access point."
::= { cLApWlanStatsEntry 7 }
-- ********************************************************************
-- * AP Station Mgmt(SMT) Parameters
-- ********************************************************************
cLApIfSmtParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApIfSmtParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the station management
information in the APs that have joined the
controller. Information populated through the
entries of this table is used by the AP to
perform the expected 802.11 operations on
the respective dot11 interfaces to coordinate with
other 802.11 devices in the network.
Since this table has the indices defined in the
tables cLApTable and cLApDot11IfTable, an entry in
this table is automatically removed when the
respective entry is removed in either of those
tables."
::= { ciscoLwappAp 2 }
cLApIfSmtParamEntry OBJECT-TYPE
SYNTAX CLApIfSmtParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the information
pertaining to one particular dot11 interface of
this AP used to perform the 802.11 protocol
operations on the respective dot11 interface.
Rows are added or deleted to this table when
APs join or leave the controller respectively."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId
}
::= { cLApIfSmtParamTable 1 }
CLApIfSmtParamEntry ::= SEQUENCE {
cLApIfSmtDot11Bssid MacAddress
}
cLApIfSmtDot11Bssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the base BSSID of this AP, which
is the MAC address of the radio interface of this
AP."
::= { cLApIfSmtParamEntry 1 }
-- ********************************************************************
-- Country code setting for APs that have joined the controller
-- ********************************************************************
cLApCountryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApCountryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the country settings for
the 802.11 LWAPP Access Points that have joined the
controller.
An entry is automatically added by the controller
when a Access Point joins the controller.
The entry is removed when Access Point disasscociates
from the controller."
::= { ciscoLwappAp 3 }
cLApCountryEntry OBJECT-TYPE
SYNTAX CLApCountryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides country setting
about one 802.11 LWAPP Access Point that has joined
the controller.
Entries are removed when the APs lose their
association with the controller due to loss
of communication."
INDEX { cLApSysMacAddress }
::= { cLApCountryTable 1 }
CLApCountryEntry ::= SEQUENCE {
cLApCountryCode SnmpAdminString,
cLApCountryAllowed SnmpAdminString
}
cLApCountryCode OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the country in which the
AP is operating. This value is the 3 letter country
code."
::= { cLApCountryEntry 1 }
cLApCountryAllowed OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the country in which the
AP is operating. This value is a list of country
codes sperated by comma."
::= { cLApCountryEntry 2 }
-- ********************************************************************
-- * Halo BLE Configuration to set Beacon parameters of Halo enabled APs
-- ********************************************************************
cLHaloGlobalBleBeaconInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the beacon interval
between each transmissions from BLE module.
This value is common to HALO enabled APs that
have joined the controller."
DEFVAL { 1 }
::= { ciscoLwappApGlobalBleBeacon 1 }
cLHaloBleBeaconTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLHaloBleBeaconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the BLE global configuration.It lists
the ibeacon's identification number and attenuation value
which is common to HALO enabled AP's that
have joined the controller."
::= { ciscoLwappApGlobalBleBeacon 2 }
cLHaloBleBeaconEntry OBJECT-TYPE
SYNTAX CLHaloBleBeaconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains BLE global configuration which lists
the ibeacon's identification number and attenuation value
of HALO enabled APs that have joined the controller."
INDEX { cLHaloGlobalBleBeaconId }
::= { cLHaloBleBeaconTable 1 }
CLHaloBleBeaconEntry ::= SEQUENCE {
cLHaloGlobalBleBeaconId Unsigned32,
cLHaloGlobalBleBeaconUuid SnmpAdminString,
cLHaloGlobalBleBeaconTxPower Unsigned32,
cLHaloGlobalBleBeaconEnable TruthValue
}
cLHaloGlobalBleBeaconId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the BLE ibeacon ID for
which gloabl BLE configurations to be
applied."
::= { cLHaloBleBeaconEntry 1 }
cLHaloGlobalBleBeaconUuid OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the UUID (universally unique identifier)
which is a 128-bit value."
::= { cLHaloBleBeaconEntry 2 }
cLHaloGlobalBleBeaconTxPower OBJECT-TYPE
SYNTAX Unsigned32 (0..52)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies TX power of particular ibeacon for
HALO enabled APs that have joined the controller.The TX power
is based on size of proximity zone needed."
::= { cLHaloBleBeaconEntry 3 }
cLHaloGlobalBleBeaconEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of the BLE beacons.
A value of 'true' indicates BLE beacon is enabled.
A value of 'false' indicates BLE beacon is disabled."
::= { cLHaloBleBeaconEntry 4 }
cLApBleBeaconTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApBleBeaconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents BLE ibeacon's AP specific configuration
for HALO enabled APs that have joined the controller."
::= { ciscoLwappApGlobalBleBeacon 3 }
cLApBleBeaconEntry OBJECT-TYPE
SYNTAX CLApBleBeaconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains BLE Beacon's AP specific configuration."
INDEX {
cLApSysMacAddress,
cLHaloGlobalBleBeaconId
}
::= { cLApBleBeaconTable 1 }
CLApBleBeaconEntry ::= SEQUENCE {
cLApBleBeaconMajorField Unsigned32,
cLApBleBeaconMinorField Unsigned32,
cLApBleBeaconTxPower Unsigned32,
cLApBleBeaconStatus TruthValue,
cLApBleBeaconUuid SnmpAdminString,
cLApBleBeaconInterval Unsigned32,
cLApBleBeaconApplyGlobal TruthValue,
cLApBleBeaconAdvTxPower Unsigned32
}
cLApBleBeaconMajorField OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Major value of ibeacon
that is used to differentiate ibeacons that have the same
proximity UUID."
::= { cLApBleBeaconEntry 1 }
cLApBleBeaconMinorField OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Minor value of ibeacon
that is used to differentiate ibeacons that have the same
proximity UUID and has same major value."
::= { cLApBleBeaconEntry 2 }
cLApBleBeaconTxPower OBJECT-TYPE
SYNTAX Unsigned32 (0..52)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies TX power of particular ibeacon for
specified HALO enabled AP. The TX power value is based on
the size of proximity zone needed."
::= { cLApBleBeaconEntry 3 }
cLApBleBeaconStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of the BLE beacons.
A value of 'true' indicates BLE beacon is enabled,
A value of 'false' indicates BLE beacon is disabled."
::= { cLApBleBeaconEntry 4 }
cLApBleBeaconUuid OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the UUID (universally unique identifier)
which is a 128-bit value."
::= { cLApBleBeaconEntry 5 }
cLApBleBeaconInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the beacon interval
between each transmissions from BLE module.
This value is common to HALO enabled APs that
have joined the controller."
DEFVAL { 1 }
::= { cLApBleBeaconEntry 6 }
cLApBleBeaconApplyGlobal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to clear all BLE configuration at AP.
A value of 'true' indicates configurations need to be cleared.
A value of 'false' indicates configurations need not be
cleared."
DEFVAL { false }
::= { cLApBleBeaconEntry 7 }
cLApBleBeaconAdvTxPower OBJECT-TYPE
SYNTAX Unsigned32 (40..100)
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the beacon advertised transmission
power in the BLE beacon payload.
This value is common to all beacons for a single AP."
DEFVAL { 59 }
::= { cLApBleBeaconEntry 8 }
-- ********************************************************************
-- * Halo BLE Module Mibs
-- ********************************************************************
-- ********************************************************************
-- * Halo Hyperlocation Config Mibs
-- ********************************************************************
cLApHyperlocationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApHyperlocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
APs hyperlocation state and its config nature
controller."
::= { ciscoLwappApHyperlocation 1 }
cLApHyperlocationEntry OBJECT-TYPE
SYNTAX CLApHyperlocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about
Hyperlocation state and config nature of APs
controller."
INDEX { cLApSysMacAddress }
::= { cLApHyperlocationTable 1 }
CLApHyperlocationEntry ::= SEQUENCE {
cLApHyperlocationAdminState TruthValue,
cLApHyperlocationUnsetFlag TruthValue
}
cLApHyperlocationAdminState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the hyperlocation admin state
for an AP to be enabled or disabled.
A value of 'true' indicates admin state of HALO module
is up.
A value of 'false' indicates admin state of HALO module
is down."
::= { cLApHyperlocationEntry 1 }
cLApHyperlocationUnsetFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies explicit flag status
for AP need to be enabled or not.
A value of 'true' indicates AP has an explicit per AP config.
A value of 'false' indicates there is no AP config"
::= { cLApHyperlocationEntry 2 }
-- ********************************************************************
-- * Halo Hyperlocation Config Mibs
-- ********************************************************************
-- ********************************************************************
-- * Notification Control Object
-- ********************************************************************
ciscoLwappApIfRegulatoryDomainMismatchNotifEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control the generation of
ciscoLwappApIfRegulatoryDomainMismatchNotif
notification.
A value of 'true' indicates that the agent
generates ciscoLwappApIfRegulatoryDomainMismatchNotif
notification.
A value of 'false' indicates that the agent doesn't
generate ciscoLwappApIfRegulatoryDomainMismatchNotif
notification."
DEFVAL { true }
::= { ciscoLwappAp 4 }
ciscoLwappApCrashEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control the generation of
ciscoLwappApCrash notification.
A value of 'true' indicates that the agent generates
ciscoLwappApCrash notification.
A value of 'false' indicates that the agent doesn't
generate ciscoLwappApCrash notification."
DEFVAL { true }
::= { ciscoLwappAp 5 }
ciscoLwappApUnsupportedEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control the generation of
ciscoLwappApUnsupported notification.
A value of 'true' indicates that the agent generates
ciscoLwappApUnsupported notification.
A value of 'false' indicates that the agent doesn't
generate ciscoLwappApUnsupported
notification."
DEFVAL { true }
::= { ciscoLwappAp 6 }
ciscoLwappApAssociatedEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control the generation of
ciscoLwappApAssociated notification.
A value of 'true' indicates that the agent generates
ciscoLwappApAssociated notification.
A value of 'false' indicates that the agent doesn't
generate ciscoLwappApAssociated notification."
DEFVAL { true }
::= { ciscoLwappAp 7 }
ciscoLwappXorRadioRoleChangeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control the generation of
ciscoLwappApXorRadioRoleChangeNotify notification.
A value of 'true' indicates that the agent generates
ciscoLwappApXorRadioRoleChangeNotify notification.
A value of 'false' indicates that the agent doesn't
generate ciscoLwappApXorRadioRoleChangeNotify notification."
DEFVAL { true }
::= { ciscoLwappAp 13 }
-- ********************************************************************
-- Spectrum Expert Connection parameters
-- ********************************************************************
cLApSeClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApSeClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
details of Spectrum Expert client connected to
radio interface of APs"
::= { ciscoLwappApMIBObjects 8 }
cLApSeClientEntry OBJECT-TYPE
SYNTAX CLApSeClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the details of
Spectrum Expert client connected to APs"
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLApSeIndex
}
::= { cLApSeClientTable 1 }
CLApSeClientEntry ::= SEQUENCE {
cLApSeIndex Integer32,
cLApSeClientUserName SnmpAdminString,
cLApSeClientIPAddrType InetAddressType,
cLApSeClientIPAddr InetAddress,
cLApSeClientDuration TimeInterval,
cLApSeClientPort InetPortNumber
}
cLApSeIndex OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of the client
running the Spectrum Expert instance."
::= { cLApSeClientEntry 1 }
cLApSeClientUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the name of the
client running the Spectrum Expert application"
::= { cLApSeClientEntry 2 }
cLApSeClientIPAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the client IP address type,
that runs the SE application, made available
through cLApSeClientIPAddr"
::= { cLApSeClientEntry 3 }
cLApSeClientIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the client IP address,
that runs the SE application"
::= { cLApSeClientEntry 4 }
cLApSeClientDuration OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the duration for which the SE client
application has been up and running"
::= { cLApSeClientEntry 5 }
cLApSeClientPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the port from which the SE client
application is running"
::= { cLApSeClientEntry 6 }
-- ********************************************************************
-- Global settings for APs
-- ********************************************************************
cLApFastHbTimerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApFastHbTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains entries for AP fast heartbeat
timers configured in the controller. At startup,
all the entries in this table are set up by the central
controller. A management application can later change
the values in this table."
::= { ciscoLwappApGlobal 1 }
cLApFastHbTimerEntry OBJECT-TYPE
SYNTAX CLApFastHbTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in cLApFastHbTimerTable. There is an entry
in this table for each AP type, as identified by a value of
cLApFastHbTimerApType."
INDEX { cLApFastHbTimerApType }
::= { cLApFastHbTimerTable 1 }
CLApFastHbTimerEntry ::= SEQUENCE {
cLApFastHbTimerApType INTEGER,
cLApFastHbTimerTimeout Unsigned32,
cLApFastHbTimerEnabled TruthValue
}
cLApFastHbTimerApType OBJECT-TYPE
SYNTAX INTEGER {
local(1),
hreap(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the AP type for this entry.
local - indicates that timer is for local mode APs
hreap - indicates that timer is for HREAP APs"
::= { cLApFastHbTimerEntry 1 }
cLApFastHbTimerTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout value for the heart
beat timer. This value changes to 0 when
cLApFastHbTimerEnabled is set to 'false'."
::= { cLApFastHbTimerEntry 2 }
cLApFastHbTimerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the heartbeat timer. A value of 'true'
indicates that this timer is enabled. A value of 'false'
indicates that this timer is disabled."
::= { cLApFastHbTimerEntry 3 }
cLApPrimaryDiscoveryTimeout OBJECT-TYPE
SYNTAX Unsigned32 (30..3600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout for the primary AP
discovery."
DEFVAL { 120 }
::= { ciscoLwappApGlobal 3 }
cLApGlobalPrimaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the primary controller's
address made available through cLApPrimaryControllerAddress."
::= { ciscoLwappApGlobal 4 }
cLApGlobalPrimaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the primary controller
that the APs will join. The name and address should be
provided in the same set request. An address of all zeros
will unset the primary controller."
::= { ciscoLwappApGlobal 5 }
cLApGlobalPrimaryControllerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of the primary controller
that the APs will join."
::= { ciscoLwappApGlobal 6 }
cLApGlobalSecondaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the secondary
controller's address made available through
cLApSecondaryControllerAddress."
::= { ciscoLwappApGlobal 7 }
cLApGlobalSecondaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the secondary
controller that the APs will join. The name and address
should be provided in the same set request. An address
of all zeros will unset the secondary controller."
::= { ciscoLwappApGlobal 8 }
cLApGlobalSecondaryControllerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of the secondary controller
that the APs will join."
::= { ciscoLwappApGlobal 9 }
cLApGlobalFailoverPriority OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the global AP failover priority.
If Enabled, Priorities will be considered of the APs which
wishes to join the controller. Preference will be given to
the higher priority AP. If the number of associated AP has
already reached the limit then the controller will
disassociate a lower priority AP to accomodate a higher
priority AP.
Default is Disabled state."
DEFVAL { false }
::= { ciscoLwappApGlobal 10 }
cLApGlobalTcpMss OBJECT-TYPE
SYNTAX Integer32 (0 | 536..1363)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Global AP TCP MSS value.
Permissible value are between 536 and 1363. This will
also enable the global TCP MSS flag.
Value of 0 will disable the global TCP MSS flag.
Any change of value for this object will be reflected
to cLApTcpMss"
::= { ciscoLwappApGlobal 11 }
cLApGlobalDot11IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApGlobalDot11IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the global dot11
parameters per slot id, represented by cLApDot11IfSlotId,
of the radio interface in all the APs joined with
the controller."
::= { ciscoLwappApGlobal 12 }
cLApGlobalDot11IfEntry OBJECT-TYPE
SYNTAX CLApGlobalDot11IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents an entry in the
cLApGlobalDot11IfTable."
INDEX { cLApDot11IfSlotId }
::= { cLApGlobalDot11IfTable 1 }
CLApGlobalDot11IfEntry ::= SEQUENCE {
cLApGlobalDot11IfCdpEnabled TruthValue
}
cLApGlobalDot11IfCdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to configure the Cisco Discovery
Protocol(CDP) in the interface, represented by
cLApDot11IfSlotId of the all the APs, joined in the
controller.
Setting this object to a value of 'true' would turn on
the CDP on this slot.
Setting this object to a value of 'false' would turn off the
CDP on this slot, so that CDP advertisements are not sent.
Read operation on this attribute will not be supported.
When queried this will return a value of 'false'."
::= { cLApGlobalDot11IfEntry 1 }
cLApGlobalEthernetIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApGlobalEthernetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the global parameters
on Ethernet interfaces of all the APs joined with the
controller."
::= { ciscoLwappApGlobal 13 }
cLApGlobalEthernetIfEntry OBJECT-TYPE
SYNTAX CLApGlobalEthernetIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents an entry in
cLApGlobalEthernetIfTable."
INDEX { cLApEthernetIfSlotId }
::= { cLApGlobalEthernetIfTable 1 }
CLApGlobalEthernetIfEntry ::= SEQUENCE {
cLApGlobalEthernetIfCdpEnabled TruthValue
}
cLApGlobalEthernetIfCdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is specifies to configure the Cisco Discovery
Protocol(CDP) in the interface, represented by
cLApEthernetIfSlotId of the all the APs, joined in
the controller.
Setting this object to a value of 'true' would turn on
the CDP on this ethernet interface.
Setting this object to a value of 'false' would turn off the
CDP on this ethernet interface, so that CDP advertisements
are not sent.
Read operation on this attribute will not be supported.
When queried this will return a value of 'false'."
::= { cLApGlobalEthernetIfEntry 1 }
cLApGlobalRetransmitCount OBJECT-TYPE
SYNTAX Unsigned32
UNITS "retries"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the retransmission count for the
Control Packet of all the Access Points, joined to this
controller. This value specifies the number of packets
retransmitted after which the Access Point falls back to
another controller in case of failover."
::= { ciscoLwappApGlobal 14 }
cLApGlobalRetransmitTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the retransmission timeout for the
Control Packet of all the Access Points, joined to this
controller. This value specifies the timeout for each
retransmission, during the fallback of Access Point to
another controller in case of failover."
::= { ciscoLwappApGlobal 15 }
cLApOeapDisableLocalAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the local access is supported for
all the Office Extended Access Points, joined to this
controller. If set to true, the local SSID and and LAN ports
on the OEAP will be disabled."
::= { ciscoLwappApGlobal 16 }
cLApGlobalLEDState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the LED state of all the access
points should be enabled or disabled."
::= { ciscoLwappApGlobal 17 }
cLApRadioInterfaceShutdownEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to enable or disable AP radio Interface.
When enabled, AP radio's will be shut down when Ethernet link
goes down for a duration of time set for
cLApEthernetInterfaceDowntime. A value of 'true' indicates the
AP radio interface shutdown is enabled. A value of 'false'
indicates the AP radio interface shutdown is disabled."
::= { ciscoLwappApGlobal 18 }
cLApEthernetInterfaceDowntime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ethernet interface down time after
which the AP radio interface will be shut down."
::= { ciscoLwappApGlobal 19 }
cLAPMulticastGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP multicast group address type."
::= { ciscoLwappApGlobal 20 }
cLAPMulticastGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP multicast group address."
::= { ciscoLwappApGlobal 21 }
cLAPMulticastMode OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the switch's ethernet
multicast support.
unicast - Controller will convert multicast to
unicast packet.
multicast - Multicast mode is enabled."
::= { ciscoLwappApGlobal 22 }
cLApPrimedDiscoveryTimeout OBJECT-TYPE
SYNTAX Integer32 (0 | 120..43200)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the primed timeout for the AP
discovery."
::= { ciscoLwappApGlobal 23 }
cLApGlobalPreferMode OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the global capwap prefer-mode.
ipv4 - capwap tunnel established with ipv4 address.
ipv6 - capwap tunnel established with ipv6 address."
::= { ciscoLwappApGlobal 24 }
cLApGlobalAPLagCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the ap-lag capability state of
all the access points should be enabled or disabled.
A value of 'true' indicates ap-lag capapbility is enabled.
A value of 'false' indicates ap-lag capapbility is disabled."
::= { ciscoLwappApGlobal 25 }
cLApGlobalAPDtlsVersion OBJECT-TYPE
SYNTAX INTEGER {
dtls10(1),
dtls12(2),
dtlsall(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the dtls version of ap"
::= { ciscoLwappApGlobal 26 }
cLApGlobalAPDtlsCipherSuite OBJECT-TYPE
SYNTAX INTEGER {
rsaaes128sha1(47),
dhersaaes128cbcsha(51),
rsaaes256sha1(53),
dhersaaes256cbcsha(57),
rsaaes256sha256(61),
rsagcm128sha256(156),
rsagcm256sha384(157),
ecdsaaes128gcmsha256(49195),
ecdsaaes256gcmsha384(49196),
dhersaaes256cbcsha256(49197)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the dtls cipher suite of ap"
::= { ciscoLwappApGlobal 27 }
cLApGlobalMaxApsSupported OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum number of APs supported by
this controller."
::= { ciscoLwappApGlobal 28 }
cLApAuthorizeApMacAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag specifies the status of mac auth"
::= { ciscoLwappApGlobal 30 }
cLApAuthorizeApSerialNumAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag specifies the status of serial number auth"
::= { ciscoLwappApGlobal 31 }
cLApAuthorizeApMethodList OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the method list used for the AP
authorization when enabled.
The default method list is default"
::= { ciscoLwappApGlobal 32 }
-- ********************************************************************
-- * AP Dot11 Interface Antenna Information
-- ********************************************************************
cLApDot11IfAntennaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11IfAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
basic functional parameters corresponding to
the antenna on dot11 interfaces of the APs that have
joined the controller."
::= { ciscoLwappApIf 4 }
cLApDot11IfAntennaEntry OBJECT-TYPE
SYNTAX CLApDot11IfAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the 802.11
functional parameters of the dot11 interface of
an AP that has joined the controller.
Entries are added when the APs associate to this
controller and deleted when they lose their
association."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLApDot11IfAntennaId
}
::= { cLApDot11IfAntennaTable 1 }
CLApDot11IfAntennaEntry ::= SEQUENCE {
cLApDot11IfAntennaId Unsigned32,
cLApDot11IfAntennaTxEnable TruthValue,
cLApDot11IfAntennaRxEnable TruthValue,
cLApDot11IfAntennaEnable TruthValue
}
cLApDot11IfAntennaId OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the antenna ID of a dot11
interface on an AP.
The antenna Id for a particular dot11 interface on
a slot as represented by this object."
::= { cLApDot11IfAntennaEntry 1 }
cLApDot11IfAntennaTxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this antenna is allowed
to trasmit or not.
A value of 'true' enables the antenna to transmit.
A value of 'false' disables the antenna to transmit.
This object has been deprecated for cLApDot11IfAntennaEnable.
cLApDot11IfAntennaTxEnable object is superseded by
cLApDot11IfAntennaEnable."
DEFVAL { true }
::= { cLApDot11IfAntennaEntry 2 }
cLApDot11IfAntennaRxEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this antenna is allowed
to recieve or not.
A value of 'true' enables the antenna to receive.
A value of 'false' disables the antenna to receive.
cLApDot11IfAntennaRxEnable object is superseded by
cLApDot11IfAntennaEnable."
DEFVAL { true }
::= { cLApDot11IfAntennaEntry 3 }
cLApDot11IfAntennaEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this antenna is enabled
or not.
A value of 'true' indicates antenna is enabled.
A value of 'false' indicates antenna is disabled."
DEFVAL { true }
::= { cLApDot11IfAntennaEntry 4 }
-- ********************************************************************
-- * AP Vlan Tagging
-- ********************************************************************
cLApVlanIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApVlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
basic functional parameters corresponding to
the ethernet interfaces of the APs that have
joined the controller."
::= { ciscoLwappApIf 5 }
cLApVlanIfEntry OBJECT-TYPE
SYNTAX CLApVlanIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the VLAN
functional parameters of the Ethernet interface of
an AP that has joined the controller.
Entries are added when the administrator creates
an entry in this table."
INDEX {
cLApSysMacAddress,
cLApVlanIfEthernetId
}
::= { cLApVlanIfTable 1 }
CLApVlanIfEntry ::= SEQUENCE {
cLApVlanIfEthernetId Unsigned32,
cLApVlanIfMode INTEGER,
cLApVlanIfEnable TruthValue,
cLApVlanIfNativeVlanId Unsigned32
}
cLApVlanIfEthernetId OBJECT-TYPE
SYNTAX Unsigned32 (0..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the ID of a ethernet
interface on an AP."
::= { cLApVlanIfEntry 1 }
cLApVlanIfMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
access(2),
trunk(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP's ethernet interface is
configured for.
normal - VLAN is not operating in access or trunk.
access - VLAN is operating in access mode
trunk - VLAN is operating in trunk mode."
DEFVAL { normal }
::= { cLApVlanIfEntry 2 }
cLApVlanIfEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether this interface is
enabled or not.
A value of 'true' enables the interface.
A value of 'false' disables the interface.. This will
delete all entries on this AP's ethernet interface."
DEFVAL { true }
::= { cLApVlanIfEntry 3 }
cLApVlanIfNativeVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the native VLAN ID
assigned to this AP's ethernet interface.
This only applies when the icLApVlanIfMode
is set to 'trunk'. For all other modes this
return a value of zero."
::= { cLApVlanIfEntry 4 }
-- ********************************************************************
-- * AP Vlan Tagging
-- ********************************************************************
cLApVlanListTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApVlanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
basic functional parameters corresponding to
the VLAN Ethernet interfaces of the APs that have
joined the controller."
::= { ciscoLwappApIf 6 }
cLApVlanListEntry OBJECT-TYPE
SYNTAX CLApVlanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the VLAN
functional parameters of the Ethernet interface of
an AP that has joined the controller.
Entries are added when the administrator creates
an entry in this table."
INDEX {
cLApSysMacAddress,
cLApVlanIfEthernetId,
cLApVlanListVlanId
}
::= { cLApVlanListTable 1 }
CLApVlanListEntry ::= SEQUENCE {
cLApVlanListVlanId Unsigned32,
cLApVlanListRowStatus RowStatus
}
cLApVlanListVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the ID assigned to the
VLAN on this AP's ethernet interface."
::= { cLApVlanListEntry 1 }
cLApVlanListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies to add or delete an entry in this
table."
::= { cLApVlanListEntry 2 }
-- ********************************************************************
-- * Global AP 802.1x Supplicant Credentials
-- ********************************************************************
cLApGlobal802dot1xAuthenticationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Global AP 802.1x Supplicant
Authentication feature.
If configured as True, user can configure 8021.1x
authentication between lightweight access points and the
switch. The access point acts as an 802.1x supplicant and is
authenticated by the switch using EAP-FAST with anonymous
PAC provisioning.User can set global authentication settings
that all access points inherit as they join the controller.
This includes all access points that are currently joined to
the controller and any that join in the future. If desired,
user can override the global authentication settings and
assign unique authentication settings for a specific
access point.
Default state is False."
DEFVAL { false }
::= { ciscoLwappAp802dot1xSupplicant 1 }
cLApGlobal802dot1xSupplicantUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the 802.1x supplicant username that
is to be inherited by all access points that join the
controller."
::= { ciscoLwappAp802dot1xSupplicant 2 }
cLApGlobal802dot1xSupplicantPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the 802.1x supplicant Password that
is to be inherited by all access points that join the
controller.
A query on this OID will always return '****'."
::= { ciscoLwappAp802dot1xSupplicant 3 }
cLApGlobal802dot1xSupplicantEapType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eapFast(2),
eapTls(3),
peap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the EAP type to be
applied for ap port auth as Global config."
::= { ciscoLwappAp802dot1xSupplicant 5 }
-- ********************************************************************
-- * Per AP 802.1x Supplicant Credentials
-- ********************************************************************
cLAp802dot1xSupplicantTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLAp802dot1xSupplicantEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the information about the 802.1x
Supplicant credentials of the 802.11 LWAPP Access Points
that have joined the controller. Rows are added to this
table whenever, new APs are joined to this controller,
and rows are deleted whenever APs gets disjoined from
the controller."
::= { ciscoLwappAp802dot1xSupplicant 4 }
cLAp802dot1xSupplicantEntry OBJECT-TYPE
SYNTAX CLAp802dot1xSupplicantEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined the
controller. cLApSysMacAddress is the index which
uniquely identifies every row in the table."
INDEX { cLApSysMacAddress }
::= { cLAp802dot1xSupplicantTable 1 }
CLAp802dot1xSupplicantEntry ::= SEQUENCE {
cLAp802dot1xSupplicantOverrideEnabled TruthValue,
cLAp802dot1xSupplicantOverrideUsername SnmpAdminString,
cLAp802dot1xSupplicantOverridePassword SnmpAdminString,
cLAp802dot1xSupplicantOverrideEapType INTEGER
}
cLAp802dot1xSupplicantOverrideEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the individual AP level 802.1x
Supplicant Authentication override parameters.
A value of 'true' indicates user can override the Global AP
8021.1x authentication credentials by providing individual
AP level credentials.
A value of 'false' indicates user cannot override the
Global AP 802.1x authentication credentials."
DEFVAL { false }
::= { cLAp802dot1xSupplicantEntry 1 }
cLAp802dot1xSupplicantOverrideUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the individual AP level 802.1x
supplicant override username."
::= { cLAp802dot1xSupplicantEntry 2 }
cLAp802dot1xSupplicantOverridePassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object the individual AP level 802.1x supplicant
override password. A query on this OID will always
return '****'."
::= { cLAp802dot1xSupplicantEntry 3 }
cLAp802dot1xSupplicantOverrideEapType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
eapFast(2),
eapTls(3),
peap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the EAP type to be
applied for ap port auth as AP override config."
::= { cLAp802dot1xSupplicantEntry 4 }
-- ********************************************************************
-- * AP WLAN Stats.
-- ********************************************************************
cLApWlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApWlanInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Per-AP, Per-SSID
information of max supported clients"
::= { ciscoLwappApWlanInfo 1 }
cLApWlanInfoEntry OBJECT-TYPE
SYNTAX CLApWlanInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents the information about
clients associated to a wlan broadcasted by an access point."
INDEX {
cLApSysMacAddress,
cLWlanIndex
}
::= { cLApWlanInfoTable 1 }
CLApWlanInfoEntry ::= SEQUENCE {
cLApWlanInfoMaxClients Unsigned32
}
cLApWlanInfoMaxClients OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum supported clients
per WLAN ."
DEFVAL { 600 }
::= { cLApWlanInfoEntry 1 }
cLApRadioWlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApRadioWlanInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Per-AP, Per-radio,
Per-SSID information."
::= { ciscoLwappApWlanInfo 2 }
cLApRadioWlanInfoEntry OBJECT-TYPE
SYNTAX CLApRadioWlanInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains information of
Per-AP, Per-RADIO, Per-SSID information."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLWlanIndex
}
::= { cLApRadioWlanInfoTable 1 }
CLApRadioWlanInfoEntry ::= SEQUENCE {
cLApRadioWlanSsid SnmpAdminString,
cLApRadioWlanBssid MacAddress
}
cLApRadioWlanSsid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents SSID of the particular WLAN,
which is seen on the radio of the AP."
::= { cLApRadioWlanInfoEntry 1 }
cLApRadioWlanBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the BSSID of the SSID
on this radio of this AP."
::= { cLApRadioWlanInfoEntry 2 }
-- ********************************************************************
-- * Radio Level Configs
-- ********************************************************************
cLApDot11GlobalConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11GlobalConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the information about the
global attributes of the radio interface, that would be
applicable for all the APs that join the controller."
::= { ciscoLwappApIf 7 }
cLApDot11GlobalConfigEntry OBJECT-TYPE
SYNTAX CLApDot11GlobalConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the network
level configurations of the radio interface.
Entries cannot be added or deleted in this table."
INDEX { cLApDot11IfType }
::= { cLApDot11GlobalConfigTable 1 }
CLApDot11GlobalConfigEntry ::= SEQUENCE {
cLApNwLegacyBeamForming INTEGER,
cLApNwTxPowerThreshold Integer32,
cLApNwTxPowerThresholdVer2 Integer32
}
cLApNwLegacyBeamForming OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2),
notApplicable(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object indicates the status of legacy beam forming
in this AP. This object is applicable only for
11n supported APs.
For APs that does not support legacy beam forming,
a get request on this attribute will return
the value 'notApplicable'.
A value of 'enable' indicates that the legacy
Beam forming is enabled in this AP.
A value of 'false' indicates that the legacy
Beam forming is disabled in this AP."
DEFVAL { notApplicable }
::= { cLApDot11GlobalConfigEntry 1 }
cLApNwTxPowerThreshold OBJECT-TYPE
SYNTAX Integer32 (-80..-50)
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Global AP Transmit Power
Threshold value. The permissible range is -80 dbm to -50 dbm"
DEFVAL { -70 }
::= { cLApDot11GlobalConfigEntry 2 }
cLApNwTxPowerThresholdVer2 OBJECT-TYPE
SYNTAX Integer32 (-80..-50)
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Global AP Transmit Power
Threshold value when Inteference Optimal mode of
Tx Power Control (TPC v2) is enabled. The permissible
range is -80 dbm to -50 dbm"
DEFVAL { -67 }
::= { cLApDot11GlobalConfigEntry 3 }
-- ********************************************************************
-- * Ap Global Cipher Configurations
-- ********************************************************************
cLApSecureCipher OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
aes256sha1(2),
aes256sha2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the secure ciphers, AES256+SHA
or AES256+SHA2 for CAPWAP control tunnel.
disable - This value indicates that AP and controller will
continue to use default ciphers for CAPWAP
tunnel.
aes256sha1 - This value indicates that AP and controller will
use AES256+SHA cipher for CAPWAP tunnel.
aes256sha2 - This value indicates that AP and controller will
use AES256+SHA2 cipher for CAPWAP tunnel."
::= { ciscoLwappApSecureCipher 1 }
-- ********************************************************************
-- * AP Dot11 radio statistics Information
-- ********************************************************************
cLApDot11RadioStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11RadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the statistics information
about the radios of the APs that have joined the
controller."
::= { ciscoLwappApIf 8 }
cLApDot11RadioStatsEntry OBJECT-TYPE
SYNTAX CLApDot11RadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a statistics of
the radio of an AP that has joined the conttroller.
Entries are added when the APs associate to this
controller and deleted when they lose their
association."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId
}
::= { cLApDot11RadioStatsTable 1 }
CLApDot11RadioStatsEntry ::= SEQUENCE {
cLApDot11RadioStatsRxErrorFrameCount Counter32,
cLApDot11RadioStatsMacMicErrFrameCount Counter32,
cLApDot11RadioStatsMacDecryptErrFrameCount Counter32,
cLApDot11RadioStatsRxMgmtFrameCount Counter32,
cLApDot11RadioStatsRxCtrlFrameCount Counter32,
cLApDot11RadioStatsRxDataFrameCount Counter32,
cLApDot11RadioStatsTxMgmtFrameCount Counter32,
cLApDot11RadioStatsTxCtrlFrameCount Counter32,
cLApDot11RadioStatsTxDataFrameCount Counter32,
cLApDot11RadioStatsRxDataPacketCount Counter32,
cLApDot11RadioStatsTxDataPacketCount Counter32,
cLApDot11RadioStatsRetryFrameCount Counter32,
cLApDot11RadioStatsRetryPacketCount Counter32
}
cLApDot11RadioStatsRxErrorFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of error frames
received on the radio."
::= { cLApDot11RadioStatsEntry 1 }
cLApDot11RadioStatsMacMicErrFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of frames
with wrong MIC received by AP on the radio."
::= { cLApDot11RadioStatsEntry 2 }
cLApDot11RadioStatsMacDecryptErrFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of frames
with destroyed encrypted data received by AP
on the radio."
::= { cLApDot11RadioStatsEntry 3 }
cLApDot11RadioStatsRxMgmtFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
management frame received on the radio."
::= { cLApDot11RadioStatsEntry 4 }
cLApDot11RadioStatsRxCtrlFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
control frame received on the radio."
::= { cLApDot11RadioStatsEntry 5 }
cLApDot11RadioStatsRxDataFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
data frame received on the radio."
::= { cLApDot11RadioStatsEntry 6 }
cLApDot11RadioStatsTxMgmtFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
management frame transmitted on the radio."
::= { cLApDot11RadioStatsEntry 7 }
cLApDot11RadioStatsTxCtrlFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
control frame transmitted on the radio."
::= { cLApDot11RadioStatsEntry 8 }
cLApDot11RadioStatsTxDataFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
data frame transmitted on the radio."
::= { cLApDot11RadioStatsEntry 9 }
cLApDot11RadioStatsRxDataPacketCount OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
data packets received on the radio."
::= { cLApDot11RadioStatsEntry 10 }
cLApDot11RadioStatsTxDataPacketCount OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
data packets transmitted on the radio."
::= { cLApDot11RadioStatsEntry 11 }
cLApDot11RadioStatsRetryFrameCount OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
downstream retry frames on the radio."
::= { cLApDot11RadioStatsEntry 12 }
cLApDot11RadioStatsRetryPacketCount OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total number of
downstream retry packets on the radio."
::= { cLApDot11RadioStatsEntry 13 }
-- ********************************************************************
-- * AP Radio Rssi Stats
-- *******************************************************************
cLApDot11RadioRssiTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11RadioRssiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Per AP, Per Radio Stats information
of Average, Highest, Lowest Rssi of all the clients update
of the APs Radio."
::= { ciscoLwappApIf 9 }
cLApDot11RadioRssiEntry OBJECT-TYPE
SYNTAX CLApDot11RadioRssiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains stats information of
Average, Highest and Lowest RSSI of Per AP Per Radio."
INDEX {
cLApSysMacAddress,
cLApDot11IfType
}
::= { cLApDot11RadioRssiTable 1 }
CLApDot11RadioRssiEntry ::= SEQUENCE {
cLApDot11RadioRssiHighest Integer32,
cLApDot11RadioRssiLowest Integer32,
cLApDot11RadioRssiAverage Integer32
}
cLApDot11RadioRssiHighest OBJECT-TYPE
SYNTAX Integer32
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Highest Rssi value of the specific
radio on this access point. The value '0' dbm represents no
activity on this access point radio."
::= { cLApDot11RadioRssiEntry 1 }
cLApDot11RadioRssiLowest OBJECT-TYPE
SYNTAX Integer32
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Lowest Rssi value of the specific
radio on this access point. The value '0' dbm represents no
activity on this access point radio."
::= { cLApDot11RadioRssiEntry 2 }
cLApDot11RadioRssiAverage OBJECT-TYPE
SYNTAX Integer32
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Average Rssi value of the specific
radio on this access point. The value '0' dbm represents no
activity on this access point radio."
::= { cLApDot11RadioRssiEntry 3 }
-- ********************************************************************
-- * AP Crash file Info
-- ********************************************************************
cLApCrashInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApCrashInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the crash file information
for each AP.
An entry is automatically added to this table when
an Access Points crashes and reboots.
Entry is removed from this table when AP
disassociates from the controllers."
::= { ciscoLwappAp 8 }
cLApCrashInfoEntry OBJECT-TYPE
SYNTAX CLApCrashInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides crash
information available for each AP."
INDEX { cLApSysMacAddress }
::= { cLApCrashInfoTable 1 }
CLApCrashInfoEntry ::= SEQUENCE {
cLApCrashFileName SnmpAdminString,
cLApCrashFileSize Unsigned32,
cLApCrashFileTimeStamp DateAndTime
}
cLApCrashFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..28))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the crash file name for a specific AP."
::= { cLApCrashInfoEntry 1 }
cLApCrashFileSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the size of the crash file."
::= { cLApCrashInfoEntry 2 }
cLApCrashFileTimeStamp OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the timestamp of the crash file."
::= { cLApCrashInfoEntry 3 }
cLApExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the system information
for each AP."
::= { ciscoLwappAp 10 }
cLApExtEntry OBJECT-TYPE
SYNTAX CLApExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides system
information for each AP."
INDEX { cLApSysMacAddress }
::= { cLApExtTable 1 }
CLApExtEntry ::= SEQUENCE {
cLApLEDFlashStatus TruthValue,
cLApLEDFlashDuration Unsigned32,
cLApInetAddressType InetAddressType,
cLApInetAddress InetAddress,
cLApStaticIpv6AddressEnabled TruthValue,
cLApStaticIpv6InetAddressType InetAddressType,
cLApStaticIpv6InetAddress InetAddress,
cLApStaticIpv6PrefixLength Unsigned32,
cLApStaticIpv6GatewayInetAddressType InetAddressType,
cLApStaticIpv6GatewayInetAddress InetAddress,
cLApStaticIpNetmaskType InetAddressType,
cLApStaticIpNetmask InetAddress,
cLApPreferMode INTEGER,
cLApPreferModeApplied INTEGER
}
cLApLEDFlashStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the state of the AP LED Flash.
A value of 'true' indicates LED flash is enabled.
A value of 'false' indicates LED flash is disabled."
::= { cLApExtEntry 1 }
cLApLEDFlashDuration OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the duration for which the AP's LED
should blink. This is applicable when the value of
cLApFlashStatus is TRUE. Value of 0 indicates the blinking
for infinite duration."
::= { cLApExtEntry 2 }
cLApInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the AP
address made available through
cLApInetAddress."
::= { cLApExtEntry 3 }
cLApInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the
Access Point."
::= { cLApExtEntry 4 }
cLApStaticIpv6AddressEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies that AP is
configured to use static IPv6 address.
A value of 'true' indicates AP can assign with static
IP address.
A value of 'false' indicates AP cannot assign with static
IP address."
::= { cLApExtEntry 5 }
cLApStaticIpv6InetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specified the address type made
available through cLApStaticIpv6InetAddress."
::= { cLApExtEntry 6 }
cLApStaticIpv6InetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the static IPv6 address
of the Access Point."
::= { cLApExtEntry 7 }
cLApStaticIpv6PrefixLength OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the prefix length of the static IP
Address configured on the AP."
::= { cLApExtEntry 8 }
cLApStaticIpv6GatewayInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specified the address type made
available through cLApStaticIpv6GatewayInetAddress."
::= { cLApExtEntry 9 }
cLApStaticIpv6GatewayInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the IPv6 Address of the Gateway server.
This attribute can be configured only if the static IP
option is turned on in the AP."
::= { cLApExtEntry 10 }
cLApStaticIpNetmaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the netmask address type for AP's
static IP."
::= { cLApExtEntry 11 }
cLApStaticIpNetmask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies netmask for ipv4 address."
::= { cLApExtEntry 12 }
cLApPreferMode OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the capwap prefer-mode (ipv4 or ipv6)
of AP."
::= { cLApExtEntry 13 }
cLApPreferModeApplied OBJECT-TYPE
SYNTAX INTEGER {
apgroup(1),
global(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the prefer-mode of AP applied by
apgroup config or global config.
apgroup - capwap prefer mode applied at ap group level.
global - capwap prefer mode applied globally."
::= { cLApExtEntry 14 }
-- ********************************************************************
-- * AP Sys Info
-- ********************************************************************
cLApSysInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApSysInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the system information
for each AP."
::= { ciscoLwappAp 9 }
cLApSysInfoEntry OBJECT-TYPE
SYNTAX CLApSysInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides system
information for each AP."
INDEX { cLApSysMacAddress }
::= { cLApSysInfoTable 1 }
CLApSysInfoEntry ::= SEQUENCE {
cLApSysMemType SnmpAdminString,
cLApSysMemSize Unsigned32,
cLApSysFlashSize Unsigned32,
cLApSysCpuType SnmpAdminString,
cLApSysFlashType SnmpAdminString
}
cLApSysMemType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP system memory type."
::= { cLApSysInfoEntry 1 }
cLApSysMemSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "KBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the total AP system memory size in
Kbytes."
::= { cLApSysInfoEntry 2 }
cLApSysFlashSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "KBytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP flash size in Kbytes."
::= { cLApSysInfoEntry 3 }
cLApSysCpuType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP cpu type"
::= { cLApSysInfoEntry 4 }
cLApSysFlashType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP Flash type."
::= { cLApSysInfoEntry 5 }
-- ********************************************************************
-- * AP Dot11 radio rate statistics Information
-- ********************************************************************
cLApDot11RadioRateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11RadioRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents per AP, per radio, per rate stats
information of all the clients of the APs Radio."
::= { ciscoLwappApIf 10 }
cLApDot11RadioRateStatsEntry OBJECT-TYPE
SYNTAX CLApDot11RadioRateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains stats information of Rx/Tx packets and
bytes of per AP per radio per rate."
INDEX {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLApDot11RadioRate
}
::= { cLApDot11RadioRateStatsTable 1 }
CLApDot11RadioRateStatsEntry ::= SEQUENCE {
cLApDot11RadioRate Unsigned32,
cLApDot11RadioRateStatsRxPackets Counter32,
cLApDot11RadioRateStatsRxBytes Counter32,
cLApDot11RadioRateStatsTxPackets Counter32,
cLApDot11RadioRateStatsTxBytes Counter32,
cLApDot11RadioRateString SnmpAdminString
}
cLApDot11RadioRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the data rate value
for a particular band."
::= { cLApDot11RadioRateStatsEntry 1 }
cLApDot11RadioRateStatsRxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of packets received for
the specific radio and data rate on this access point."
::= { cLApDot11RadioRateStatsEntry 2 }
cLApDot11RadioRateStatsRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of bytes received for
the specific radio and data rate on this access point."
::= { cLApDot11RadioRateStatsEntry 3 }
cLApDot11RadioRateStatsTxPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of packets transmitted from
the specific radio and data rate on this access point."
::= { cLApDot11RadioRateStatsEntry 4 }
cLApDot11RadioRateStatsTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the number of bytes transmitted from
the specific radio and data rate on this access point."
::= { cLApDot11RadioRateStatsEntry 5 }
cLApDot11RadioRateString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the data rate in a user-friendly
text string format."
::= { cLApDot11RadioRateStatsEntry 6 }
cLApPacketDumpFtpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address type of
the server to which the packet dump is stored."
::= { ciscoLwappPacketDumpInfo 1 }
cLApPacketDumpFtpServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the server to
which the packet dump is stored."
::= { ciscoLwappPacketDumpInfo 2 }
cLApPacketDumpFtpServerPath OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the directory path for
the packet dump storing.
The controller remembers the last file path used."
::= { ciscoLwappPacketDumpInfo 3 }
cLApPacketDumpFtpUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to store the FTP username
for transferring the packet-dump to the FTP server."
::= { ciscoLwappPacketDumpInfo 4 }
cLApPacketDumpFtpPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the FTP server login password to
store the packet dump."
::= { ciscoLwappPacketDumpInfo 5 }
cLApPacketDumpClassifier OBJECT-TYPE
SYNTAX BITS {
management(0),
data(1),
control(2),
dot1x(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Frame Type considered
for packet-dump."
::= { ciscoLwappPacketDumpInfo 6 }
cLApPacketDumpBufferSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the buffer size considered
for packet-dump."
::= { ciscoLwappPacketDumpInfo 7 }
cLApPacketDumpCaptureTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the capture time considered
for packet-dump."
::= { ciscoLwappPacketDumpInfo 8 }
cLApPacketDumpTruncation OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the length of the packet
after truncation"
::= { ciscoLwappPacketDumpInfo 9 }
cLApPacketDumpApName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP name on which
we need to start packet dump."
::= { ciscoLwappPacketDumpInfo 10 }
cLApPacketDumpDeviceMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the MAC address of the
device for which we need to start packet dump on the AP."
::= { ciscoLwappPacketDumpInfo 11 }
cLApPacketDumpStartStop OBJECT-TYPE
SYNTAX INTEGER {
start(1),
stop(2),
none(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies user to start or stop, packet dump on
the associated AP to which the particular mobile station is
connected.
start - packet dump is started.
stop - packet dump is stopped.
none- information about current session is not available to the
controller."
::= { ciscoLwappPacketDumpInfo 12 }
-- ********************************************************************
-- * AP Radio Ssid Stats
-- *******************************************************************
cLApDot11RadioSsidTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApDot11RadioSsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents Per AP, Per Radio information
of Ssid of all the neighbor APs updating
the APs Radio."
::= { ciscoLwappApIf 11 }
cLApDot11RadioSsidEntry OBJECT-TYPE
SYNTAX CLApDot11RadioSsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains ssid information of
Neighbor APs of Per AP Per Radio."
INDEX {
cLApSysMacAddress,
cLApDot11IfType,
cLApSsidIndex
}
::= { cLApDot11RadioSsidTable 1 }
CLApDot11RadioSsidEntry ::= SEQUENCE {
cLApSsidIndex Unsigned32,
cLApDot11RadioSsidName OCTET STRING
}
cLApSsidIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of the ssid
detected by Per AP Per Radio."
::= { cLApDot11RadioSsidEntry 1 }
cLApDot11RadioSsidName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the ssid name of the neighbor AP
on this access point."
::= { cLApDot11RadioSsidEntry 2 }
-- ********************************************************************
-- * AP Cable Modem Stats
-- *******************************************************************
cLApCableModemIfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApCableModemIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the statistics of cable
modem interface per AP when the CM connected to the AP."
::= { ciscoLwappApIf 12 }
cLApCableModemIfStatsEntry OBJECT-TYPE
SYNTAX CLApCableModemIfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains stats information of cable modem
per AP"
INDEX { cLApSysMacAddress }
::= { cLApCableModemIfStatsTable 1 }
CLApCableModemIfStatsEntry ::= SEQUENCE {
cLApCmMacAddress MacAddress,
cLApCmApMacAddress MacAddress,
cLApCmSwVersion SnmpAdminString,
cLApEthernetSpeed SnmpAdminString,
cLApEthernetStatus SnmpAdminString,
cLApCmStatus SnmpAdminString,
cLApCmSerialNumber SnmpAdminString,
cLApCmUsChannelStatus SnmpAdminString,
cLApCmDsChannelStatus SnmpAdminString,
cLApCmMaskBit SnmpAdminString
}
cLApCmMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the MAC address
of the Cable Modem that has been connected to
the AP."
::= { cLApCableModemIfStatsEntry 1 }
cLApCmApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the ethernet MAC address
of the AP where the Cable Modem is connected."
::= { cLApCableModemIfStatsEntry 2 }
cLApCmSwVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the software version
of the Cable Modem that has been connected to
the AP."
::= { cLApCableModemIfStatsEntry 3 }
cLApEthernetSpeed OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the ethernet speed
of the Cable Modem that has been connected to
the AP."
::= { cLApCableModemIfStatsEntry 4 }
cLApEthernetStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the ethernet status
of the Cable Modem that has been connected to
the AP."
::= { cLApCableModemIfStatsEntry 5 }
cLApCmStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the status of the
Cable Modem that has been connected to
the AP."
::= { cLApCableModemIfStatsEntry 6 }
cLApCmSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the serial number
of the Cable Modem that has been connected to
the AP."
::= { cLApCableModemIfStatsEntry 7 }
cLApCmUsChannelStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upstream channel
Status of the Cable Modem that has been
connected to the AP."
::= { cLApCableModemIfStatsEntry 8 }
cLApCmDsChannelStatus OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the downstream Channel
Status of the Cable Modem that has been
connected to the AP."
::= { cLApCableModemIfStatsEntry 9 }
cLApCmMaskBit OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the mask bit
of the Cable Modem based on the mask
value the CM statistics is displayed
for the AP."
::= { cLApCableModemIfStatsEntry 10 }
-- ********************************************************************
-- * AP Environmental information
-- ********************************************************************
cLApEnvInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApEnvInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about temperature
degree state and orientation of the AP"
::= { ciscoLwappAp 11 }
cLApEnvInfoEntry OBJECT-TYPE
SYNTAX CLApEnvInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in this table.
An entry is created when AP joins the controller.
The entry is removed when the AP lose their
association with the controller due to loss of
communication with controller or when a AP
is reset."
INDEX { cLApSysMacAddress }
::= { cLApEnvInfoTable 1 }
CLApEnvInfoEntry ::= SEQUENCE {
cLApEnvTemperatureDegree SnmpAdminString,
cLApEnvTemperatureState INTEGER,
cLApEnvOrientation INTEGER,
cLApEnvPoeOutStatus INTEGER
}
cLApEnvTemperatureDegree OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents temperature
of the AP in both celcius and fahrenheit."
::= { cLApEnvInfoEntry 1 }
cLApEnvTemperatureState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
green(1),
yellow(2),
red(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents temperature state
of the AP."
::= { cLApEnvInfoEntry 2 }
cLApEnvOrientation OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
vertical(1),
horizontal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents orientation
of the AP."
::= { cLApEnvInfoEntry 3 }
cLApEnvPoeOutStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents POE out status
of the AP."
::= { cLApEnvInfoEntry 4 }
-- ********************************************************************
-- * GPS related information
-- ********************************************************************
cLApGpsInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApGpsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents information about location and
velocity parameters received from the GPS module on the
LWAPP Access Points that have joined the controller."
::= { ciscoLwappAp 12 }
cLApGpsInfoEntry OBJECT-TYPE
SYNTAX CLApGpsInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in this table.
An entry is created when AP joins the controller.
The entry is removed when the AP lose their
association with the controller due to loss of
communication with controller"
INDEX { cLApSysMacAddress }
::= { cLApGpsInfoTable 1 }
CLApGpsInfoEntry ::= SEQUENCE {
cLApGpsLocationPresent TruthValue,
cLApGpsLocationValid TruthValue,
cLApGpsLatitude SnmpAdminString,
cLApGpsLongitude SnmpAdminString,
cLApGpsAltitude SnmpAdminString,
cLApGpsCollectionTime TimeStamp
}
cLApGpsLocationPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether the access point
has the GPS module installed or not.
A value of 'true' indicates GPS module is present in
AP.
A value of 'false' indicates GPS module is not
present in AP."
::= { cLApGpsInfoEntry 1 }
cLApGpsLocationValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether the location
information is valid or not.
A value of 'true' indicates GPS location
is valid.
A value of 'false' indicates GPS location
is not valid."
::= { cLApGpsInfoEntry 2 }
cLApGpsLatitude OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents latitude information
in the GPS data received."
::= { cLApGpsInfoEntry 3 }
cLApGpsLongitude OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents longitude information
in the GPS data received."
::= { cLApGpsInfoEntry 4 }
cLApGpsAltitude OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents altitude information
in the GPS data received."
::= { cLApGpsInfoEntry 5 }
cLApGpsCollectionTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time when GPS
data was collected."
::= { cLApGpsInfoEntry 6 }
-- ********************************************************************
-- * AP Profile Configuration
-- ********************************************************************
cLApProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the information about the Access Point
profiles. Access Point profile is a set of configuration which
can be different for APs at different site/location.
Rows are added or deleted by explicit management actions
initiated by the user from a network management station through
the cLApProfileRowStatus object."
::= { ciscoLwappApProfile 1 }
cLApProfileEntry OBJECT-TYPE
SYNTAX CLApProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table represents the AP profile
configuration which can be applied to set of APs based on the
controller configuration. Entries can be added/deleted by
explicit management actions by NMS or by user console."
INDEX { cLApProfileName }
::= { cLApProfileTable 1 }
CLApProfileEntry ::= SEQUENCE {
cLApProfileName SnmpAdminString,
cLApProfileRowStatus RowStatus,
cLApProfileCredentialGlobalUserName SnmpAdminString,
cLApProfileCredentialGlobalPassword SnmpAdminString,
cLApProfileCredentialGlobalSecret SnmpAdminString,
cLApProfileCredentialEnableGlobalCredentials TruthValue,
cLApProfileLinkLatencyEnable INTEGER,
cLApProfileHaloBleBeaconInterval Unsigned32,
cLApProfileFastHbTimerTimeout Unsigned32,
cLApProfileFastHbTimerEnabled TruthValue,
cLApProfilePrimaryDiscoveryTimeout Unsigned32,
cLApProfileBackupPrimaryControllerAddressType InetAddressType,
cLApProfileBackupPrimaryControllerAddress InetAddress,
cLApProfileBackupPrimaryControllerName SnmpAdminString,
cLApProfileBackupSecondaryControllerAddressType InetAddressType,
cLApProfileBackupSecondaryControllerAddress InetAddress,
cLApProfileBackupSecondaryControllerName SnmpAdminString,
cLApProfileBackupTertiaryControllerAddressType InetAddressType,
cLApProfileBackupTertiaryControllerAddress InetAddress,
cLApProfileBackupTertiaryControllerName SnmpAdminString,
cLApProfileTcpMss Unsigned32,
cLApProfileRetransmitCount Unsigned32,
cLApProfileRetransmitTimeout Unsigned32,
cLApProfileOeapDisableLocalAccess TruthValue,
cLApProfileLedState TruthValue,
cLApProfileRadioInterfaceShutdownEnabled TruthValue,
cLApProfileEthernetInterfaceDowntime Unsigned32,
cLApProfileMulticastGroupAddressType InetAddressType,
cLApProfileMulticastGroupAddress InetAddress,
cLApProfileMulticastMode INTEGER,
cLApProfilePrimedJoinTimeout Unsigned32,
cLApProfilePreferMode INTEGER,
cLApProfileApLagEnabled TruthValue,
cLApProfile802dot1xAuthenticationEnabled TruthValue,
cLApProfile802dot1xSupplicantUsername SnmpAdminString,
cLApProfile802dot1xSupplicantPassword SnmpAdminString,
cLApProfileEncryptionEnable TruthValue,
cLApProfileTelnetEnable TruthValue,
cLApProfileSshEnable TruthValue,
cLApProfileHyperlocationEnable TruthValue,
cLApProfileHyperlocationDetectionThreshold Integer32,
cLApProfileHyperlocationResetThreshold Unsigned32,
cLApProfileHyperlocationTriggerThreshold Unsigned32,
cLApProfileHyperlocationNtpIpAddressType InetAddressType,
cLApProfileHyperlocationNtpIpAddress InetAddress,
cLApProfileAdjustMss TruthValue,
cLApProfileDiscoveryTimeout Unsigned32,
cLApProfileHeartBeatTimeout Unsigned32,
cLApProfileCdpEnable TruthValue,
cLApProfileApPacketCaptureProfile SnmpAdminString,
cLApProfileRogueReportInterval Unsigned32,
cLApProfileRogueMinimumRssi Integer32,
cLApProfileRogueTransientInterval Unsigned32,
cLApProfileRogueContainFlexconnect TruthValue,
cLApProfileRogueContainAutoRateEnable TruthValue,
cLApProfileRogueDetectionEnable TruthValue,
cLApProfileReportInterval24ghz Integer32,
cLApProfileReportInterval5ghz Integer32,
cLApProfileDot1xApSwitchEapAuth INTEGER,
cLApProfileDot1xApSwtichLscAuth INTEGER,
cLApProfileMeshProfileName SnmpAdminString,
cLApProfileUsbStatus TruthValue,
cLApProfileVlanTagging TruthValue,
cLApProfileApCountryCode SnmpAdminString,
cLApProfileExtModuleEnable TruthValue,
cLApProfileStatsTimer Unsigned32,
cLApProfilePoePreStandardSwitchFlag TruthValue,
cLApProfilePoePowerInjectorSelection INTEGER,
cLApProfilePoeInjectorSwitchMac MacAddress,
cLApProfileHaloBleBeaconAdvertisedPwr Unsigned32,
cLApProfileTftpDownGradeAddressType InetAddressType,
cLApProfileTftpDownGradeAddress InetAddress,
cLApProfileTftpDownGradeFileName SnmpAdminString,
cLApProfileCoreDumpType INTEGER,
cLApProfileCoreDumpTftpAddressType InetAddressType,
cLApProfileCoreDumpTftpAddress InetAddress,
cLApProfileCoreDumpCoreFileName SnmpAdminString,
cLApProfileBackupFallbackEnabled TruthValue
}
cLApProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies one instance of an AP Profile on the
controller."
::= { cLApProfileEntry 1 }
cLApProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the row to be added or
deleted in this table."
::= { cLApProfileEntry 2 }
cLApProfileCredentialGlobalUserName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the global username for the APs
associated to a particular AP Profile.
This user name is used to access the console on the AP."
::= { cLApProfileEntry 3 }
cLApProfileCredentialGlobalPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the password corresponding to
the user name represented by cLApProfileCredentialGlobalUserName
object."
::= { cLApProfileEntry 4 }
cLApProfileCredentialGlobalSecret OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the secret key for the APs associated
to particular AP profile. This provides read-write access
to the console on the AP."
::= { cLApProfileEntry 5 }
cLApProfileCredentialEnableGlobalCredentials OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether the global credentials for the
APs associated to a particular AP Profile is enabled or
disabled.
A value of 'true' enables the global username/password
to be used for the APs associated to a particular AP Profile.
A value of 'false' disables the global credentials and
uses the credentials specific for the APs."
::= { cLApProfileEntry 6 }
cLApProfileLinkLatencyEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2),
data(3),
reset(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to the configuration of the Link
Latency on the APs associated to a particular AP profile.
disable - disables the link latency on the APs associated to
a particular AP profile.
enable - enables the link latency on the APs associated to
a particular AP profile.
data - enables data link latency on the APs associated to
a particular AP profile.
reset - reset the link latency on the APs associated to
a particular AP profile."
::= { cLApProfileEntry 7 }
cLApProfileHaloBleBeaconInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "Hz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time interval between HALO BLE
beacon transmissions.
This value is common to HALO enabled APs that have joined the
controller under the same AP profile."
DEFVAL { 1 }
::= { cLApProfileEntry 8 }
cLApProfileFastHbTimerTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout value for the Fast Heart Beat
timer of all the APs associated to the current AP Profile."
::= { cLApProfileEntry 12 }
cLApProfileFastHbTimerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies if Fast Heart Beat Timer is enabled or
not.
A value of 'true' indicates that this timer is enabled.
A value of 'false' indicates that this timer is disabled."
::= { cLApProfileEntry 13 }
cLApProfilePrimaryDiscoveryTimeout OBJECT-TYPE
SYNTAX Unsigned32 (30..3000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the timeout value for the primary AP
discovery for a given Ap profile."
DEFVAL { 120 }
::= { cLApProfileEntry 14 }
cLApProfileBackupPrimaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the primary controller's
address made available through
cLApProfileBackupPrimaryControllerAddress."
::= { cLApProfileEntry 15 }
cLApProfileBackupPrimaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the primary controller
that the APs in the profile should associate with. The name and
address should be provided in the same set request. An address
of all zeros will unset the primary controller."
::= { cLApProfileEntry 16 }
cLApProfileBackupPrimaryControllerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of the primary controller
that the APs in the profile should associate with."
::= { cLApProfileEntry 17 }
cLApProfileBackupSecondaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the secondary
controller's address made available through
cLApProfileBackupSecondaryControllerAddress."
::= { cLApProfileEntry 18 }
cLApProfileBackupSecondaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the secondary
controller that the APs in the profile should associate with.
The name and address should be provided in the same
set request. An address of all zeros will unset the secondary
controller."
::= { cLApProfileEntry 19 }
cLApProfileBackupSecondaryControllerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of the secondary controller
that the APs in the profile should associate."
::= { cLApProfileEntry 20 }
cLApProfileBackupTertiaryControllerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the tertiary
controller's address made available through
cLApProfileBackupTertiaryControllerAddress."
::= { cLApProfileEntry 21 }
cLApProfileBackupTertiaryControllerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the address of the tertiary
controller that the APs in the profile should associate with.
The name and address should be provided in the same
set request. An address of all zeros will unset the tertiary
controller."
::= { cLApProfileEntry 22 }
cLApProfileBackupTertiaryControllerName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the name of the tertiary controller
that the APs in the profile should associate with"
::= { cLApProfileEntry 23 }
cLApProfileTcpMss OBJECT-TYPE
SYNTAX Unsigned32 (536..1363)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP TCP MSS value per AP profile.
The permissible value are between 536 and 1363. This will
also enable the global TCP MSS flag.
Any change of value for this object will be reflected
to cLApTcpMss"
::= { cLApProfileEntry 25 }
cLApProfileRetransmitCount OBJECT-TYPE
SYNTAX Unsigned32 (3..8)
UNITS "retries"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the retransmission count for the
control packet for all APs associated to this particular AP
profile. This value represents the number of packets
retransmitted after which the Access Point falls back to
another controller in case of failover."
::= { cLApProfileEntry 26 }
cLApProfileRetransmitTimeout OBJECT-TYPE
SYNTAX Unsigned32 (2..5)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the retransmission timeout for the
control packet for all APs associated to this particular AP
profile. This value represents the timeout for each
control Packet of all the Access Points, joined to this
retransmission, during the fallback of Access Point to
another controller in case of failover."
::= { cLApProfileEntry 27 }
cLApProfileOeapDisableLocalAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the local access is supported for
all the Office Extended Access Points associated to current AP
Profile. If set to true, the local SSID and and LAN ports on
the OEAP will be disabled."
::= { cLApProfileEntry 28 }
cLApProfileLedState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the LED state of all the
access points associated to a profile should be enabled or
disabled."
::= { cLApProfileEntry 29 }
cLApProfileRadioInterfaceShutdownEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the user to enable or disable radio
interface of all the APs associated to current AP Profile.
When enabled, AP radio's will be shut down when ethernet link
goes down for a duration of time set for
cLApProfileEthernetInterfaceDowntime.
A value of 'true' indicates the AP radio interface shutdown is
enabled.
A value of 'false' indicates the AP radio interface shutdown is
disabled."
::= { cLApProfileEntry 30 }
cLApProfileEthernetInterfaceDowntime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ethernet interface down time after
which the AP radio interface will be shut down for Aps in a
profile."
::= { cLApProfileEntry 31 }
cLApProfileMulticastGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the AP multicast group address type."
::= { cLApProfileEntry 32 }
cLApProfileMulticastGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the IPv6 multicast group address of all
the APs associated to current AP Profile."
::= { cLApProfileEntry 33 }
cLApProfileMulticastMode OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ethernet multicast support of all
the APs associated to current AP Profile.
unicast - Controller will convert multicast to
unicast packet.
multicast - Multicast mode is enabled."
::= { cLApProfileEntry 34 }
cLApProfilePrimedJoinTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..43200)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the primed timeout for the AP
discovery for a given profile."
::= { cLApProfileEntry 35 }
cLApProfilePreferMode OBJECT-TYPE
SYNTAX INTEGER {
unconfig(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the capwap tunnel prefer-mode for all APs
associated to this particular AP Profile.
unconfig - capwap tunnel is not established.
ipv4 - capwap tunnel established with ipv4 address.
ipv6 - capwap tunnel established with ipv6 address."
::= { cLApProfileEntry 36 }
cLApProfileApLagEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ap-lag capability state of all the
APs associated to current AP profile.
A value of 'true' indicates the ap-lag capability state is
enabled.
A value of 'false' indicates the ap-lag capability state is
disabled."
::= { cLApProfileEntry 37 }
cLApProfile802dot1xAuthenticationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the 802.1x supplicant authentication
feature of APs associated to current AP Profile.
If configured as True, user can configure 8021.1x
authentication between lightweight access points and the
switch. The access point acts as an 802.1x supplicant and is
authenticated by the switch using EAP-FAST with anonymous
PAC provisioning.User can set global authentication settings
that all access points inherit as they join the controller.
This includes all access points that are currently joined to
the controller and any that join in the future. If desired,
user can override the global authentication settings and
assign unique authentication settings for a specific
access point."
DEFVAL { false }
::= { cLApProfileEntry 38 }
cLApProfile802dot1xSupplicantUsername OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the 802.1x supplicant username that
is to be inherited by all the APs associated to current AP
Profile."
::= { cLApProfileEntry 39 }
cLApProfile802dot1xSupplicantPassword OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the 802.1x supplicant Password that
is to be inherited by all the APs associated to current AP
Profile.
A query on this OID will always return '****'."
::= { cLApProfileEntry 40 }
cLApProfileEncryptionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether encyrption between
controller and AP is enabled or not in a profile. Encryption
can only be enabled if ESM card in controller is
pluged in.
A value of 'true' enables encryption between
controller and AP.
A value of 'false' disables encryption between
controller and AP."
DEFVAL { false }
::= { cLApProfileEntry 41 }
cLApProfileTelnetEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Telnet session
can be established to the APs in a given AP profile.
A value of 'true' indicates an Telnet session
can be established to the APs in a given AP profile.
A value of 'false' indicates an Telnet session
cannot be established to the APs in a given AP profile."
DEFVAL { false }
::= { cLApProfileEntry 42 }
cLApProfileSshEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether SSH session
can be established to the APs asscoaited to an AP Profile.
A value of 'true' indicates an SSH session
can be established to the APs asscoaited to AP an Profile.
A value of 'false' indicates an SSH session
cannot be established to the APs asscoaited to an AP Profile."
DEFVAL { false }
::= { cLApProfileEntry 43 }
cLApProfileHyperlocationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the admin status of Hyperlocation.
A value of 'true' indicates that Hyperlocation is enabled.
A value of 'false' indicates that Hyperlocation is disabled."
DEFVAL { false }
::= { cLApProfileEntry 44 }
cLApProfileHyperlocationDetectionThreshold OBJECT-TYPE
SYNTAX Integer32 (-100..-50)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the value of the Hyperlocation
detection threshold expressed in dBm. Valid range is
-100 dbm to -50 dbm."
DEFVAL { -100 }
::= { cLApProfileEntry 45 }
cLApProfileHyperlocationResetThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the value of the Hyperlocation
reset threshold expressed in scan cycles. Valid range is
0 to 99 scan cycles. Its value must always be smaller
than the trigger threshold."
DEFVAL { 8 }
::= { cLApProfileEntry 46 }
cLApProfileHyperlocationTriggerThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the value of the Hyperlocation
trigger threshold expressed in scan cycles. Valid range
is 1 to 100 scan cycles."
DEFVAL { 10 }
::= { cLApProfileEntry 47 }
cLApProfileHyperlocationNtpIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the NTP server IP address type
configured for Hyperlocation feature."
::= { cLApProfileEntry 48 }
cLApProfileHyperlocationNtpIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the NTP server IP address
configured for Hyperlocation feature."
::= { cLApProfileEntry 49 }
cLApProfileAdjustMss OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable the TCP MSS flag"
DEFVAL { false }
::= { cLApProfileEntry 50 }
cLApProfileDiscoveryTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the timeout for the AP
discovery for a particular AP profile."
DEFVAL { 10 }
::= { cLApProfileEntry 51 }
cLApProfileHeartBeatTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Heart beat timeout for the APs in
a particular AP profile."
DEFVAL { 30 }
::= { cLApProfileEntry 52 }
cLApProfileCdpEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies to enable the CDP for all APs
associated to particular AP Profile"
DEFVAL { false }
::= { cLApProfileEntry 53 }
cLApProfileApPacketCaptureProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP packet capture profile
name mapped to this AP join profile. Access Points in this
AP join profile will use the parameters of packet capture
profile"
::= { cLApProfileEntry 54 }
cLApProfileRogueReportInterval OBJECT-TYPE
SYNTAX Unsigned32 (10..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the rogue report interval,
which is the interval that monitor mode APs send
rogue detection details to the controller.
This value is valid only for the current AP Profile."
::= { cLApProfileEntry 55 }
cLApProfileRogueMinimumRssi OBJECT-TYPE
SYNTAX Integer32 (-128..-70)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the minimum value of RSSI
considered for detection of rogues.
This value is valid only for the current AP Profile."
::= { cLApProfileEntry 56 }
cLApProfileRogueTransientInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 120..1800)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the rogue transient
interval for this AP Profile.
A value of '0' specifies that an AP sends
rogue detection details to the controller
as soon as it detects a rogue.
A non-zero value specifies that an AP sends
rogue detection details to the controller if
it hears the rogue more than once in the specified
interval."
DEFVAL { 0 }
::= { cLApProfileEntry 57 }
cLApProfileRogueContainFlexconnect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Rogue containment of
standalone flexconnect APs is enabled in this AP Profile.
A value of 'true' enables rogue containment.
A value of 'false' disables rogue containment."
DEFVAL { false }
::= { cLApProfileEntry 58 }
cLApProfileRogueContainAutoRateEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Rogue containment auto-rate
is enabled in this AP Profile.
A value of 'true' enables auto-rate.
A value of 'false' disables auto-rate."
DEFVAL { false }
::= { cLApProfileEntry 59 }
cLApProfileRogueDetectionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether Rogue Detection
is enabled in this AP Profile.
A value of 'true' enables Rogue Detection.
A value of 'false' disables Rogue Detection.
Rogue detection is not supported on sniffer
and rogue detector mode APs."
DEFVAL { true }
::= { cLApProfileEntry 60 }
cLApProfileReportInterval24ghz OBJECT-TYPE
SYNTAX Integer32 (5..90)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interval at which APs
connected will send client statitics for 802.11b radio for a
particular AP profile."
DEFVAL { 90 }
::= { cLApProfileEntry 61 }
cLApProfileReportInterval5ghz OBJECT-TYPE
SYNTAX Integer32 (5..90)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interval at which APs
connected will send client statitics for 802.11a radio for a
particular AP profile"
DEFVAL { 90 }
::= { cLApProfileEntry 62 }
cLApProfileDot1xApSwitchEapAuth OBJECT-TYPE
SYNTAX INTEGER {
eapNone(1),
eapFast(2),
eapTls(3),
peap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Dot1x EAP type
in this AP Profile."
::= { cLApProfileEntry 63 }
cLApProfileDot1xApSwtichLscAuth OBJECT-TYPE
SYNTAX INTEGER {
authNone(1),
authCapwapDtls(2),
authDot1xPort(3),
authBoth(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies Dot1x LSC AP Auth
type in this AP Profile."
::= { cLApProfileEntry 64 }
cLApProfileMeshProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object uniquely identifies a mesh profile in a
particular AP profile."
::= { cLApProfileEntry 65 }
cLApProfileUsbStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies USB status(enable/disable) to be applied
to all APs belonging to this AP join profile."
DEFVAL { true }
::= { cLApProfileEntry 66 }
cLApProfileVlanTagging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the Vlan tagging of all the APs
associated to current AP Profile should be enabled or disabled."
DEFVAL { false }
::= { cLApProfileEntry 67 }
cLApProfileApCountryCode OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP country code mapped to this
AP join profile."
::= { cLApProfileEntry 68 }
cLApProfileExtModuleEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether extended module
is enabled in this AP Profile.
A value of 'true' enables extended module.
A value of 'false' disables extended module."
::= { cLApProfileEntry 69 }
cLApProfileStatsTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the duration of the
stats timer value in seconds."
DEFVAL { 180 }
::= { cLApProfileEntry 70 }
cLApProfilePoePreStandardSwitchFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the Pre-standard
switch state as PoE option.
A value of 'true' enables Pre-standard switch.
A value of 'false' disables Pre-standard switch."
::= { cLApProfileEntry 71 }
cLApProfilePoePowerInjectorSelection OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
installed(2),
override(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Power over Ethernet (PoE) injector
state for all the APs associated to current AP profile.
A value of '1' represents the state of PoE injector is unknown.
A value of '2' represents the state of PoE injector is
installed.
A value of '3' represents the state of PoE injector is
override."
::= { cLApProfileEntry 72 }
cLApProfilePoeInjectorSwitchMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the MAC address of the
switch port that has a Power injector."
::= { cLApProfileEntry 73 }
cLApProfileHaloBleBeaconAdvertisedPwr OBJECT-TYPE
SYNTAX Unsigned32 (40..100)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the Power for HALO BLE beacon
advertisement."
DEFVAL { 59 }
::= { cLApProfileEntry 74 }
cLApProfileTftpDownGradeAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the TFTP servers
address type in use."
::= { cLApProfileEntry 75 }
cLApProfileTftpDownGradeAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the TFTP servers
IP address."
::= { cLApProfileEntry 76 }
cLApProfileTftpDownGradeFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP image downgrade
file name on the TFTP server."
::= { cLApProfileEntry 77 }
cLApProfileCoreDumpType OBJECT-TYPE
SYNTAX INTEGER {
uncompress(1),
compress(2),
disable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether coredump is enabled and
whether it is in compress or uncompress.
A value of '1' represents uncompressed form of core dump file.
A value of '2' represents compressed form of core dump file.
A value of '3' disables the coredump."
::= { cLApProfileEntry 78 }
cLApProfileCoreDumpTftpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the TFTP server address type used
for AP core dump transfer."
::= { cLApProfileEntry 79 }
cLApProfileCoreDumpTftpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the TFTP server address used for AP
core dump transfer."
::= { cLApProfileEntry 80 }
cLApProfileCoreDumpCoreFileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents core dump file name
on the TFTP server."
::= { cLApProfileEntry 81 }
cLApProfileBackupFallbackEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents fallback status of APs asscoaited
to an AP Profile.
A value of 'true' represents AP fallback enabled.
A value of 'false' represents AP fallback disabled."
::= { cLApProfileEntry 82 }
-- *********************************************************************
-- * Halo BLE Configuration
-- *********************************************************************
cLApProfileHaloBleBeaconTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApProfileHaloBleBeaconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents an instance of HALO BLE configuration per
AP profile. It lists the HALO BLE beacon parameters which are
common for HALO enabled APs that have joined the controller
under the same AP profile."
::= { ciscoLwappApProfile 2 }
cLApProfileHaloBleBeaconEntry OBJECT-TYPE
SYNTAX CLApProfileHaloBleBeaconEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains an instance of HALO BLE beacon
configuration for a specific AP profile. It lists the HALO BLE
beacon ID, UUID, transmission power, and status per beacon for
HALO enabled APs of a particular AP profile that have joined the
controller"
INDEX {
cLApProfileName,
cLApProfileHaloBleBeaconId
}
::= { cLApProfileHaloBleBeaconTable 1 }
CLApProfileHaloBleBeaconEntry ::= SEQUENCE {
cLApProfileHaloBleBeaconId Unsigned32,
cLApProfileHaloBleBeaconUuid SnmpAdminString,
cLApProfileHaloBleBeaconTxPower Unsigned32,
cLApProfileHaloBleBeaconEnabled TruthValue
}
cLApProfileHaloBleBeaconId OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents HALO BLE beacon ID for which BLE
configuration to be applied."
::= { cLApProfileHaloBleBeaconEntry 1 }
cLApProfileHaloBleBeaconUuid OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents HALO BLE beacon UUID (universally
unique identifier) which is a 128-bit value."
::= { cLApProfileHaloBleBeaconEntry 2 }
cLApProfileHaloBleBeaconTxPower OBJECT-TYPE
SYNTAX Unsigned32 (0..52)
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents HALO BLE beacon transmission power.
The transmission power is based on the size of the required
proximity zone."
::= { cLApProfileHaloBleBeaconEntry 3 }
cLApProfileHaloBleBeaconEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the status of HALO BLE beacon.
true(1) - enable the HALO BLE beacon,
false(2) - disable the HALO BLE beacon."
::= { cLApProfileHaloBleBeaconEntry 4 }
-- *********************************************************************
-- * AP Packet Capture Profile Configuration
-- *********************************************************************
cLApPacketCaptureProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApPacketCaptureProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the information about the packet capture
parameters for the 802.11 LWAPP Access Points.
Rows are added to this table whenever, new profiles
are added to this controller, and rows are deleted
whenever profiles gets deleted from the controller."
::= { ciscoLwappApPacketCapture 1 }
cLApPacketCaptureProfileEntry OBJECT-TYPE
SYNTAX CLApPacketCaptureProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about the packet
capture profile configured on the controller."
INDEX { cLApPacketCaptureProfileName }
::= { cLApPacketCaptureProfileTable 1 }
CLApPacketCaptureProfileEntry ::= SEQUENCE {
cLApPacketCaptureProfileName SnmpAdminString,
cLApPacketCaptureProfileRowStatus RowStatus,
cLApPacketCaptureProfileBufferSize Unsigned32,
cLApPacketCaptureProfileDuration Unsigned32,
cLApPacketCaptureProfileTruncation Unsigned32,
cLApPacketCaptureProfileFtpServerAddressType InetAddressType,
cLApPacketCaptureProfileFtpServerAddress InetAddress,
cLApPacketCaptureProfileFtpServerPath SnmpAdminString,
cLApPacketCaptureProfileFtpUsername SnmpAdminString,
cLApPacketCaptureProfileFtpPassword SnmpAdminString,
cLApPacketCaptureProfileClassifierArp TruthValue,
cLApPacketCaptureProfileClassifierBroadcast TruthValue,
cLApPacketCaptureProfileClassifierControl TruthValue,
cLApPacketCaptureProfileClassifierData TruthValue,
cLApPacketCaptureProfileClassifierDot1x TruthValue,
cLApPacketCaptureProfileClassifierIapp TruthValue,
cLApPacketCaptureProfileClassifierIp TruthValue,
cLApPacketCaptureProfileClassifierManagement TruthValue,
cLApPacketCaptureProfileClassifierMulticast TruthValue,
cLApPacketCaptureProfileClassifierTcp TruthValue,
cLApPacketCaptureProfileClassifierUdp TruthValue,
cLApPacketCaptureProfileClassifierTcpPort InetPortNumber,
cLApPacketCaptureProfileClassifierUdpPort InetPortNumber
}
cLApPacketCaptureProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the profile name for
ap packet capture profile. The parameters of
packet capture profile are used while capturing packets
on the Access Point for the specified wireless client."
::= { cLApPacketCaptureProfileEntry 1 }
cLApPacketCaptureProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to add or delete an entry in this table."
::= { cLApPacketCaptureProfileEntry 2 }
cLApPacketCaptureProfileBufferSize OBJECT-TYPE
SYNTAX Unsigned32 (1024..4096)
UNITS "kilobytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the size of the buffer Access Point
should use to copy the captured packets for client and dump
it to the FTP server."
DEFVAL { 2048 }
::= { cLApPacketCaptureProfileEntry 3 }
cLApPacketCaptureProfileDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..60)
UNITS "Minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the duration for which the Access Point
should capture packets for specified client."
DEFVAL { 10 }
::= { cLApPacketCaptureProfileEntry 4 }
cLApPacketCaptureProfileTruncation OBJECT-TYPE
SYNTAX Unsigned32 (0..1500)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the length of the packet after
truncation while capturing packets on the Access Point.
Default value is 0 which indictaes captured packet should
contain the full payload length."
::= { cLApPacketCaptureProfileEntry 5 }
cLApPacketCaptureProfileFtpServerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the type of the ftp server
IP Address made available through
cLApPacketCaptureProfileEntry."
::= { cLApPacketCaptureProfileEntry 6 }
cLApPacketCaptureProfileFtpServerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the IP Address of the
FTP server. Access Point will dump the captured packets
to a file in this ftp server."
::= { cLApPacketCaptureProfileEntry 7 }
cLApPacketCaptureProfileFtpServerPath OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the directory path in the
ftp server for storing the file which contains the
captured packets in the Access Point."
::= { cLApPacketCaptureProfileEntry 8 }
cLApPacketCaptureProfileFtpUsername OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the username to login into
the ftp server in order to transfer the captured
packets from the Access Point."
::= { cLApPacketCaptureProfileEntry 9 }
cLApPacketCaptureProfileFtpPassword OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the password to login into
the ftp server in order to transfer the captured
packets from the Access Point."
::= { cLApPacketCaptureProfileEntry 10 }
cLApPacketCaptureProfileClassifierArp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for ARP packets
while capturing packets on the Access Point.
A value of 'true' indicates ARP packets should be captured.
A value of 'false' indicates ARP packets shouldn't be captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 11 }
cLApPacketCaptureProfileClassifierBroadcast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 Broadcast
packets, while capturing packets on the Access Point.
A value of 'true' indicates Broadcast packets should be
captured.
A value of 'false' indicates Broadcast packets should not be
captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 12 }
cLApPacketCaptureProfileClassifierControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 control packets,
while capturing packets on the Access Point under AP Profile
which is making use of this packet capture profile.
A value of 'true' indicates 802.11 control packets should be
captured.
A value of 'false' indicates 802.11 control packets should not
be captured."
DEFVAL { true }
::= { cLApPacketCaptureProfileEntry 13 }
cLApPacketCaptureProfileClassifierData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 Data packets,
while capturing packets on the Access Point under AP Profile
which is making use of this packet capture profile.
A value of 'true' indicates 802.11 Data packets should be
captured.
A value of 'false' indicates 802.11 Data packets should not be
captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 14 }
cLApPacketCaptureProfileClassifierDot1x OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 Dot1x packets,
while capturing packets on the Access Point under AP Profile
which is making use of this packet capture profile.
A value of 'true' indicates 802.11 Dot1x packets should be
captured.
A value of 'false' indicates 802.11 Dot1x packets should
not be captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 15 }
cLApPacketCaptureProfileClassifierIapp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 IAPP packets,
while capturing packets on the Access Point under AP Profile
which is making use of this packet capture profile.
A value of 'true' indicates IAPP packets should be captured.
A value of 'false' indicates IAPP packets should
not be captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 16 }
cLApPacketCaptureProfileClassifierIp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for IP packets,
while capturing packets on the Access Point.
A value of 'true' indicates IP packets should be captured.
A value of 'false' indicates IP packets should not be captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 17 }
cLApPacketCaptureProfileClassifierManagement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 Management
packets, while capturing packets on the Access Point. A value
of 'true' indicates 802.11 Management packets should be
captured.
A value of 'false' indicates 802.11 Management packets should
not be captured."
DEFVAL { true }
::= { cLApPacketCaptureProfileEntry 18 }
cLApPacketCaptureProfileClassifierMulticast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for 802.11 Multicast
packets, while capturing packets on the Access Point.
A value of 'true' indicates Multicast packets should be
captured.
A value of 'false' indicates Multicast packets should not be
captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 19 }
cLApPacketCaptureProfileClassifierTcp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for TCP packets,
while capturing packets on the Access Point.
Value of 'true' indicates IP packets should be captured.
Value of 'false' indicates IP packets should not be captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 20 }
cLApPacketCaptureProfileClassifierUdp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filters for TCP packets,
while capturing packets on the Access Point.
Value of 'true' indicates IP packets should be captured.
Value of 'false' indicates IP packets should not be captured."
DEFVAL { false }
::= { cLApPacketCaptureProfileEntry 21 }
cLApPacketCaptureProfileClassifierTcpPort OBJECT-TYPE
SYNTAX InetPortNumber (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filter value port number for TCP
packets, while capturing packets on the Access Point.
Default value is 0 which indicates all TCP packets should
be captured."
DEFVAL { 0 }
::= { cLApPacketCaptureProfileEntry 22 }
cLApPacketCaptureProfileClassifierUdpPort OBJECT-TYPE
SYNTAX InetPortNumber (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the filter value port number for UDP
packets, while capturing packets on the Access Point under AP
Profile which is making use of this packet capture profile.
Default value is 0 which indicates all UDP packets should
be captured."
DEFVAL { 0 }
::= { cLApPacketCaptureProfileEntry 23 }
-- *********************************************************************
-- * AP Packet Capture Client Table
-- *********************************************************************
cLApPacketCaptureClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApPacketCaptureClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information about the status of
packet capture already in progress on per Client basis.
Rows are added to this table whenever, packet capture is
started for a new client, and rows are deleted whenever
packet capture gets stopped for a particular Client."
::= { ciscoLwappApPacketCapture 2 }
cLApPacketCaptureClientEntry OBJECT-TYPE
SYNTAX CLApPacketCaptureClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about packet
capture session currently going on for a client on 802.11
LWAPP Access Point that has joined the controller."
INDEX { cLApPacketCaptureClientDeviceMac }
::= { cLApPacketCaptureClientTable 1 }
CLApPacketCaptureClientEntry ::= SEQUENCE {
cLApPacketCaptureClientDeviceMac MacAddress,
cLApPacketCaptureClientApMacAddress MacAddress,
cLApPacketCaptureClientAutoMode TruthValue,
cLApPacketCaptureClientStartStop INTEGER,
cLApPacketCaptureClientSiteName SnmpAdminString,
cLApPacketCaptureClientRowStatus RowStatus
}
cLApPacketCaptureClientDeviceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the mac address of the client for
which packet capture should be started on the Access Point.
Access Point will check for this mac address
while capturing packets."
::= { cLApPacketCaptureClientEntry 1 }
cLApPacketCaptureClientApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the base radio mac address
of the Access Point on which packet capture should
be started. This will be used only in case of static mode
but, it is mandatory to populate this in static mode as well."
::= { cLApPacketCaptureClientEntry 2 }
cLApPacketCaptureClientAutoMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the mode for packet capture.
A value of 'true' indicates packet capture should be started
in auto mode, which means capture will be started on the
Access Point on which device is currently connected and
also on the nearby Access Points which appear in the
RRM neighbor lists of present Access Point.
A value of 'false' indicates packet capture should be
started only on the specified Access Point."
::= { cLApPacketCaptureClientEntry 3 }
cLApPacketCaptureClientStartStop OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
start(2),
stop(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the trigger to start or stop
packet capture for the client. A value of '1'
indicates packet capture should be started. A value
of '2' indicates packet capture should be stopped."
::= { cLApPacketCaptureClientEntry 4 }
cLApPacketCaptureClientSiteName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the name of the site on which the
specific device or the Access Point is present."
::= { cLApPacketCaptureClientEntry 5 }
cLApPacketCaptureClientRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This oject specifies to the addition or deletion of an
entry in this table. When an entry is added, packet
capture will be started for the specified device.
When an entry is deleted, packet capture will be stopped
for the specified device."
::= { cLApPacketCaptureClientEntry 6 }
-- *********************************************************************
-- * AP Packet Capture AP table
-- *********************************************************************
cLApPacketCaptureApTable OBJECT-TYPE
SYNTAX SEQUENCE OF CLApPacketCaptureApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information about the status of
packet capture already in progress on a per AP, per Client
basis. Rows are added to this table whenever, packet capture
is started for a client on a new AP, and rows are deleted
whenever packet capture gets stopped on a particular AP."
::= { ciscoLwappApPacketCapture 3 }
cLApPacketCaptureApEntry OBJECT-TYPE
SYNTAX CLApPacketCaptureApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table provides information about status of
packet capture already in progress on the specific AP."
INDEX { cLApSysMacAddress }
::= { cLApPacketCaptureApTable 1 }
CLApPacketCaptureApEntry ::= SEQUENCE {
cLApPacketCaptureApDeviceMac MacAddress,
cLApPacketCaptureApMacAddress MacAddress,
cLApPacketCaptureApStatus TruthValue
}
cLApPacketCaptureApDeviceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the mac address of the device for
which packet capture was started on the Access Point.
Access Point will check for this mac address
while capturing packets."
::= { cLApPacketCaptureApEntry 1 }
cLApPacketCaptureApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the base radio mac address of
the Access Point on which packet capture was started for
the specific device."
::= { cLApPacketCaptureApEntry 2 }
cLApPacketCaptureApStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the status of the packet capture.
A value of 'true' indicates packet capture has been started
for the specified device on the specific Access Point,
A value of 'false' indicates packet capture is not started
for the specified device on the specific Access Point."
::= { cLApPacketCaptureApEntry 3 }
-- ********************************************************************
-- * Notification Objects
-- ********************************************************************
cLApAssocFailureReason OBJECT-TYPE
SYNTAX CLApAssocFailureReason
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the failure reasons when
a AP fails to associate with a controller."
::= { ciscoLwappApMIBNotifObjects 1 }
cLApRogueApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the radio MAC address
common to the dot11 interfaces of the rogue AP."
::= { ciscoLwappApMIBNotifObjects 2 }
cLApDot11RadioChannelNumber OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the channel number of the
radio interface of the AP, represented by
cLApDot11IfType."
::= { ciscoLwappApMIBNotifObjects 3 }
cLApRogueApSsid OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the SSID used by the
rogue AP to intrude the network."
::= { ciscoLwappApMIBNotifObjects 4 }
cLApRogueType OBJECT-TYPE
SYNTAX INTEGER {
asleap(1),
honeypot(2),
other(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the SSID of the used by the
rogue AP to intrude the network."
::= { ciscoLwappApMIBNotifObjects 5 }
cLApWipsReason OBJECT-TYPE
SYNTAX INTEGER {
noMonitoringDevice(1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the failure reasons for an AP
when cLApWipsEnable is set to 'true'.
noMonitoringDevice - No monitoring device
connected to collect WIPs information."
::= { ciscoLwappApMIBNotifObjects 6 }
cLApWipsClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies whether this event is
raise or clear.
A value of 'true' indicates this event is cleared
A value of 'false' indicates this even is raised."
::= { ciscoLwappApMIBNotifObjects 7 }
cLApIfUpDownFailureType OBJECT-TYPE
SYNTAX INTEGER {
detectedFailure(1),
configuredReset(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the type of the
AP interface failure.
detectedFailure(1) - Failure of radio.
configuredReset(2) - Reset due to manual
configuration."
::= { ciscoLwappApMIBNotifObjects 8 }
cLApIfUpDownCause OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the cause of the
AP interface failure."
::= { ciscoLwappApMIBNotifObjects 9 }
cLApIfUpDownFailureCode OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the code of the
AP interface failure."
::= { ciscoLwappApMIBNotifObjects 10 }
cLApAlarmSet OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies whether this event is
raise or clear.
A value of 'true' indicates this event is set.
A value of 'false' indicates this even is cleared."
::= { ciscoLwappApMIBNotifObjects 11 }
cLApRogueClassType OBJECT-TYPE
SYNTAX INTEGER {
pending(0),
friendly(1),
malicious(2),
unclassified(3),
custom(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the AP class type of the
Rogue AP detected."
::= { ciscoLwappApMIBNotifObjects 12 }
cLApRogueDetectedChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the rogue
detected channel number."
::= { ciscoLwappApMIBNotifObjects 13 }
cLApRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the Rogue RSSI as seen by
AP Interface."
::= { ciscoLwappApMIBNotifObjects 14 }
cLApSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the SNR seen by AP
Interface from Rogue"
::= { ciscoLwappApMIBNotifObjects 15 }
cLApDot11RadioCurrentChannel OBJECT-TYPE
SYNTAX CLDot11Channel
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the dot11
current channel."
::= { ciscoLwappApMIBNotifObjects 16 }
cLApAdhocRogue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the flag used to state if
the rogue found is an Adhoc rogue or it is an AP."
::= { ciscoLwappApMIBNotifObjects 17 }
cLApRogueAPOnWiredNetwork OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the flag used to state if
the rogue is found on the wired network.
A value of '1' indicates Rogue AP is found on wired
network.
A value of '0' indicates Rogue AP is not found
on wired network."
::= { ciscoLwappApMIBNotifObjects 18 }
cLApRogueMode OBJECT-TYPE
SYNTAX INTEGER {
initializing(0),
pending(1),
alert(2),
detectedLrad(3),
known(4),
acknowledge(5),
contained(6),
threat(7),
containedPending(8),
knownContained(9),
trustedMissing(10)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This attribute is use to specify the state in which
the Rogue AP is user can set the Rogue AP in alert,
known or acknowledge state.
Alert state means Rogue AP can be a potential threat,
trap will be sent out to trap recipients.
Known state means its just internal AP which is not
on the same Switch.
Acknowledge state means an external AP whose
existence is acceptable and not a threat (probably
some other company's AP).
Contained means containement is initiated and ongoing.
Threat is usually the state when the rogue is found
on wired network.
known(4), knownContained(9) and trustedMissing(10)
will appear in known rogue list.
known rogues can be pre provisioned and known rogues
state can be changed to alert(2)."
::= { ciscoLwappApMIBNotifObjects 19 }
cLApRogueIsClassifiedByRule OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the flag used to state if the
rogue is classified by a rogue rule.
A value of 'true' indicates its classifed by rogue rule.
A value of 'false' indicates its not classified by rogue
rule."
::= { ciscoLwappApMIBNotifObjects 20 }
cLApRogueClassifiedApMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the radio MAC address
of the classified rogue AP."
::= { ciscoLwappApMIBNotifObjects 21 }
cLApRogueClassifiedRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the Rogue classified RSSI as
seen by Airespace AP Interface."
::= { ciscoLwappApMIBNotifObjects 22 }
cLAPPreviousMonitorMode OBJECT-TYPE
SYNTAX CLApMode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the previous AP monitor Mode."
::= { ciscoLwappApMIBNotifObjects 23 }
cLAPCurrentMonitorMode OBJECT-TYPE
SYNTAX CLApMode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the current AP monitor Mode."
::= { ciscoLwappApMIBNotifObjects 24 }
cLApSsidKeyConfSsidA OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the SSID which has same
cipher key with another SSID on the same AP.
The another SSID is represented by cLApSsidKeyConfSsidB."
::= { ciscoLwappApMIBNotifObjects 25 }
cLApSsidKeyConfKeyIdxA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents key index of the SSID which has same
cipher key with another SSID on the same AP.
It is the key index of cLApSsidKeyConfSsidA.
The another SSID is represented by cLApSsidKeyConfSsidB."
::= { ciscoLwappApMIBNotifObjects 26 }
cLApSsidKeyConfSsidB OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the SSID which has same
cipher key with another SSID on the same AP.
The another SSID is represented by cLApSsidKeyConfSsidA."
::= { ciscoLwappApMIBNotifObjects 27 }
cLApSsidKeyConfKeyIdxB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents key index of the SSID which has same
cipher key with another SSID on the same AP.
It is the key index of cLApSsidKeyConfSsidB.
The another SSID is represented by cLApSsidKeyConfSsidA."
::= { ciscoLwappApMIBNotifObjects 28 }
cLApPreviousChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the channel before changed."
::= { ciscoLwappApMIBNotifObjects 29 }
cLApCurrentChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the channel after changed."
::= { ciscoLwappApMIBNotifObjects 30 }
cLApChannelCustomize OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
customized(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the channel's change mode.
If this value is true, then bsnAPDot11CurrentChannel in
bsnAPIfDot11PhyDSSSTable is assigned by dynamic
algorithm and is read-only."
::= { ciscoLwappApMIBNotifObjects 31 }
cLApIfLoadChannelUtilization OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the code of the
AP Interface channel load utilization."
::= { ciscoLwappApMIBNotifObjects 32 }
cLAPGroupVlanName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object specifies the code of the
AP Group Interface Name."
::= { ciscoLwappApMIBNotifObjects 33 }
cLApRuleName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object represents the rule name to identify
applied on the Ap."
::= { ciscoLwappApMIBNotifObjects 34 }
cLApSeverityScore OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is used to define the custom classification
severity score of the rules.
This object is applicable when cLRuleRogueType is configured
as 'custom'."
::= { ciscoLwappApMIBNotifObjects 35 }
cLApDot11XorRadioRoleChangeReason OBJECT-TYPE
SYNTAX INTEGER {
none(1),
auto(2),
manual(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is used to identify the reason code for
radio role change of XOR radio."
::= { ciscoLwappApMIBNotifObjects 36 }
cLApDot11XorRadioBandChangeReason OBJECT-TYPE
SYNTAX INTEGER {
none(1),
coverageHole(2),
hyperlocation(3),
revert(4),
fra(5),
manual(6)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is used to identify the reason code for
radio band change of XOR radio."
::= { ciscoLwappApMIBNotifObjects 37 }
-- ********************************************************************
-- * Notifications
-- ********************************************************************
ciscoLwappApIfRegulatoryDomainMismatchNotif NOTIFICATION-TYPE
OBJECTS {
cLApName,
cLApDot11IfType,
cLApDot11IfRegDomain,
cldRegulatoryDomain
}
STATUS current
DESCRIPTION
"This notification is generated if an AP radio's regulatory
domain doesn't match the country the controller is configured
for. Due to the mismatch, the AP will fail to associate with
the controller."
::= { ciscoLwappApMIBNotifs 1 }
ciscoLwappApCrash NOTIFICATION-TYPE
OBJECTS { cLApName }
STATUS obsolete
DESCRIPTION
"This notification is generated after an AP rejoins the
controller after a crash. Once the AP joins, the controller
will get the crash file from the AP and sends this
notification."
::= { ciscoLwappApMIBNotifs 2 }
ciscoLwappApUnsupported NOTIFICATION-TYPE
OBJECTS {
cLApName,
cLApAssocFailureReason
}
STATUS current
DESCRIPTION
"This notification is generated after an unsupported AP tries
to join the controller."
::= { ciscoLwappApMIBNotifs 3 }
ciscoLwappApAssociated NOTIFICATION-TYPE
OBJECTS {
cLApName,
cLApLastRebootReason,
cLApDataEncryptionStatus
}
STATUS current
DESCRIPTION
"This notification is generated whenever an AP joins the
controller successfully. This notification contains
information about the last reboot reason and Data
Encryption status of the AP."
::= { ciscoLwappApMIBNotifs 4 }
ciscoLwappApPower NOTIFICATION-TYPE
OBJECTS {
cLApName,
cLApPowerStatus
}
STATUS current
DESCRIPTION
"This notification is generated whenever an AP detects low
power from Ethernet."
::= { ciscoLwappApMIBNotifs 5 }
ciscoLwappApRogueApDetected NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApDot11RadioChannelNumber,
cLApRogueApSsid,
cLApRogueType
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP is
detected."
::= { ciscoLwappApMIBNotifs 6 }
ciscoLwappApRogueApCleared NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApDot11RadioChannelNumber,
cLApRogueApSsid,
cLApRogueType
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP was
detected and then subsequently if its been removed from
the network."
::= { ciscoLwappApMIBNotifs 7 }
ciscoLwappApWipsNotification NOTIFICATION-TYPE
OBJECTS {
cLApName,
cLApWipsReason,
cLApWipsClear
}
STATUS current
DESCRIPTION
"This notification is generated whenever a controller
detects a WIPS event."
::= { ciscoLwappApMIBNotifs 8 }
ciscoLwappApNoDownlinkChannelNotify NOTIFICATION-TYPE
OBJECTS { cLApName }
STATUS current
DESCRIPTION
"This notification is generated when ever AP fails to find
new downlink channel."
::= { ciscoLwappApMIBNotifs 9 }
ciscoLwappApIfUpNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLApPortNumber,
cLApIfUpDownFailureType,
cLApIfUpDownCause,
cLApIfUpDownFailureCode,
cLApName
}
STATUS current
DESCRIPTION
"This notification is generated when AP's Interface
operational status goes up."
::= { ciscoLwappApMIBNotifs 10 }
ciscoLwappApIfDownNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApDot11IfSlotId,
cLApAdminStatus,
cLApDot11IfAdminStatus,
cLApIfUpDownFailureType,
cLApIfUpDownCause,
cLApIfUpDownFailureCode,
cLApName
}
STATUS current
DESCRIPTION
"This notification is generated when AP's Interface
operational status goes down."
::= { ciscoLwappApMIBNotifs 11 }
ciscoLwappApClientThresholdNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApDot11IfSlotId,
cLApDot11IfType,
cLRFProfileHighDensityMaxRadioClients,
cLRFProfileHDClientTrapThreshold
}
STATUS current
DESCRIPTION
"This notification is generated when the number of
clients on the AP's Radio Interface exceeds
the limit defined in cLRFProfileHDClientTrapThreshold."
::= { ciscoLwappApMIBNotifs 12 }
ciscoLwappApUpgradeFailureNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApUpgradeFromVersion,
cLApUpgradeToVersion,
cLApUpgradeFailureCause
}
STATUS current
DESCRIPTION
"This notification is generated when AP image upgrade failed."
::= { ciscoLwappApMIBNotifs 13 }
ciscoLwappApCpuUsageHigh NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApCpuCurrentUsage,
cLApAlarmSet
}
STATUS current
DESCRIPTION
"This notification generates when an AP detects its
CPU usage is higher than the threshold configured in
clsSysApCpuUsageThreshold, with cLApAlarmSet
set to true. When this AP's CPU usage falls below
the threshold lately, this notification is
generated with cLApAlarmSet set to false."
::= { ciscoLwappApMIBNotifs 14 }
ciscoLwappApMemoryUsageHigh NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApMemoryCurrentUsage,
cLApAlarmSet
}
STATUS current
DESCRIPTION
"This notification generates when an AP detects its memory
usage is higher than the threshold configured in
clsSysApMemoryUsageThreshold, with cLApAlarmSet
set to true. When this AP's memory usage falls below
the threshold lately, this notification is
generated with cLApAlarmSet set to false."
::= { ciscoLwappApMIBNotifs 15 }
ciscoLwappApMaxClientLimitNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApDot11IfSlotId,
cLApMaxClientLimitNumberTrap,
cLApMaxClientLimitCause,
cLApMaxClientLimitSet
}
STATUS current
DESCRIPTION
"This notification is generated when the event that
max client limit reached is raised or cleared."
::= { ciscoLwappApMIBNotifs 16 }
ciscoLwappApAdjChannelRogueDetected NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApRogueDetectedChannel,
cLApRSSI,
cLApSNR,
cLApDot11RadioCurrentChannel,
cLApAdhocRogue,
cLApRogueApSsid,
cLApRogueClassType
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP is
detected at the Adjacent channels"
::= { ciscoLwappApMIBNotifs 17 }
ciscoLwappApAdjChannelRogueCleared NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApRogueDetectedChannel,
cLApDot11RadioCurrentChannel
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP is
detected at the Adjacent channels and then
subsequently if its been removed from the network."
::= { ciscoLwappApMIBNotifs 18 }
ciscoLwappApRogueDetected NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApRogueDetectedChannel,
cLApRSSI,
cLApSNR,
cLApRogueAPOnWiredNetwork,
cLApAdhocRogue,
cLApRogueApSsid,
cLApRogueClassType,
cLApRogueMode,
cLApRogueIsClassifiedByRule,
cLApSeverityScore,
cLApRuleName,
cLApRogueClassifiedApMacAddress,
cLApRogueClassifiedRSSI
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP is
detected at the same channel."
::= { ciscoLwappApMIBNotifs 19 }
ciscoLwappApCurrentChannelRogueDetected NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApRogueDetectedChannel,
cLApRSSI,
cLApSNR,
cLApDot11RadioCurrentChannel,
cLApAdhocRogue,
cLApRogueApSsid,
cLApRogueClassType
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP is
detected at the Current channel."
::= { ciscoLwappApMIBNotifs 20 }
ciscoLwappApCurrentChannelRogueCleared NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApRogueApMacAddress,
cLApEthernetIfSlotId,
cLApDot11IfType,
cLApRogueDetectedChannel,
cLApDot11RadioCurrentChannel
}
STATUS current
DESCRIPTION
"This notification is generated whenever a rogue AP is
detected at the Current channels and then
subsequently if its been removed from the network."
::= { ciscoLwappApMIBNotifs 21 }
ciscoLwappApMonitorModeChangeNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLAPPreviousMonitorMode,
cLAPCurrentMonitorMode
}
STATUS current
DESCRIPTION
"This notification is generated when the event that
AP monitor mode changed."
::= { ciscoLwappApMIBNotifs 22 }
ciscoLwappApAcTimeSyncFailureTrap NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName
}
STATUS current
DESCRIPTION
"This notification is generated when the heartbeat between
AP and Controller is lost or connection broken."
::= { ciscoLwappApMIBNotifs 23 }
ciscoLwappApSsidKeyConflict NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApIfMacAddress,
cLApSsidKeyConfSsidA,
cLApSsidKeyConfKeyIdxA,
cLApSsidKeyConfSsidB,
cLApSsidKeyConfKeyIdxB
}
STATUS current
DESCRIPTION
"This notification is generated whenever 2 SSIDs
on same AP have same cipher key."
::= { ciscoLwappApMIBNotifs 24 }
ciscoLwappApCurrChannelChanged NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApDot11IfSlotId,
cLApPreviousChannel,
cLApCurrentChannel,
cLApChannelCustomize
}
STATUS current
DESCRIPTION
"This notification is generated when the channel is changed
by automatic or customized."
::= { ciscoLwappApMIBNotifs 25 }
ciscoLwappApCapwapRetransmissionQueueFullEvent NOTIFICATION-TYPE
OBJECTS { cLApSysMacAddress }
STATUS current
DESCRIPTION
"This notification is generated whenever capwap retransmission
queue for an AP is filled."
::= { ciscoLwappApMIBNotifs 26 }
ciscoLwappApSystemBootupEvent NOTIFICATION-TYPE
OBJECTS { cLApSysMacAddress }
STATUS current
DESCRIPTION
"This notification is generated whenever AP boots up."
::= { ciscoLwappApMIBNotifs 27 }
ciscoLwappXmFilterCheckWarning NOTIFICATION-TYPE
OBJECTS { cLApName }
STATUS current
DESCRIPTION
"This notification is generated whenever
co-existence filter is not present"
::= { ciscoLwappApMIBNotifs 28 }
ciscoLwappApModeUnsupportedOnFlexExpressEvent NOTIFICATION-TYPE
OBJECTS { cLApSysMacAddress }
STATUS current
DESCRIPTION
"This notification is generated whenever ap with unsupported
mode joins flexexpress wlc or virtual wlc"
::= { ciscoLwappApMIBNotifs 29 }
ciscoLwappApXorRadioRoleChangeNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApDot11IfSlotId,
cLApDot11XorRadioBand,
cLApDot11XorRadioRoleChangeReason
}
STATUS current
DESCRIPTION
"This notification is generated whenever XOR radio of AP has
changed its Radio role"
::= { ciscoLwappApMIBNotifs 30 }
ciscoLwappRadioBandChangeNotify NOTIFICATION-TYPE
OBJECTS {
cLApSysMacAddress,
cLApName,
cLApDot11IfSlotId,
cLApDot11XorRadioBand,
cLApDot11XorRadioBandChangeReason
}
STATUS current
DESCRIPTION
"This notification is generated whenever XOR radio of AP has
changed its Band"
::= { ciscoLwappApMIBNotifs 31 }
-- ********************************************************************
-- * Compliance statements
-- ********************************************************************
ciscoLwappApMIBCompliances OBJECT IDENTIFIER
::= { ciscoLwappApMIBConform 1 }
ciscoLwappApMIBGroups OBJECT IDENTIFIER
::= { ciscoLwappApMIBConform 2 }
-- STATUS deprecated by ciscoLwappApMIBCompliance
ciscoLwappApMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup
}
::= { ciscoLwappApMIBCompliances 1 }
-- STATUS deprecated by ciscoLwappApMIBComplianceRev2
ciscoLwappApMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1
}
::= { ciscoLwappApMIBCompliances 2 }
-- STATUS deprecated by ciscoLwappApMIBComplianceRev3
ciscoLwappApMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2
}
::= { ciscoLwappApMIBCompliances 3 }
-- Added since last MIB approval
ciscoLwappApMIBComplianceRev3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2,
ciscoLwappApGroupSup3,
ciscoLwappApGroupSup4,
ciscoLwappApNotifObjsGroup,
ciscoLwappApNotifsGroup,
ciscoLwappApGroupSup4,
ciscoLwappApEthernetIfGroup,
ciscoLwappApRadioGroup
}
::= { ciscoLwappApMIBCompliances 4 }
-- Added for Franciscan release
ciscoLwappApMIBComplianceRev4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2,
ciscoLwappApGroupSup3,
ciscoLwappApNotifObjsGroup,
ciscoLwappApNotifsGroup,
ciscoLwappApGroupSup4,
ciscoLwappApEthernetIfGroup,
ciscoLwappApRadioGroup,
ciscoLwappApGroupSup5
}
::= { ciscoLwappApMIBCompliances 5 }
ciscoLwappApMIBComplianceRev5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2,
ciscoLwappApGroupSup3,
ciscoLwappApNotifObjsGroup,
ciscoLwappApNotifsGroup,
ciscoLwappApGroupSup4,
ciscoLwappApEthernetIfGroup,
ciscoLwappApRadioGroup,
ciscoLwappApGroupSup5,
ciscoLwappSeClientSup
}
::= { ciscoLwappApMIBCompliances 6 }
ciscoLwappApMIBComplianceRev6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2,
ciscoLwappApGroupSup3,
ciscoLwappApNotifObjsGroup,
ciscoLwappApNotifsGroup,
ciscoLwappApGroupSup4,
ciscoLwappApEthernetIfGroup,
ciscoLwappApRadioGroup,
ciscoLwappApGroupSup5,
ciscoLwappSeClientSup
}
::= { ciscoLwappApMIBCompliances 7 }
ciscoLwappApMIBComplianceRev7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2,
ciscoLwappApGroupSup3,
ciscoLwappApNotifObjsGroup,
ciscoLwappApNotifsGroupVer1,
ciscoLwappApGroupSup6,
ciscoLwappApGroupSup7,
ciscoLwappApEthernetIfGroup,
ciscoLwappApRadioGroup,
ciscoLwappApGroupSup5,
ciscoLwappSeClientSup,
ciscoLwappDot11IfAntennaGroup,
ciscoLwappRetransmitGroup,
ciscoLwappApNotifsGroupVer2,
ciscoLwappApGroupSup8,
ciscoLwappApGroupSup9,
ciscoLwappApRadioGroupSup1,
ciscoLwappHaloBleGroup,
ciscoLwappApBleBeaconGroup,
ciscoLwappApLanStatsGroup,
ciscoLwappApGroupSup10,
ciscoLwappApXorRadioGroup,
ciscoLwappApNotifsXorGroup
}
OBJECT cLApDot11IfAntennaEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApRetransmitCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApRetransmitTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalRetransmitCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalRetransmitTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPrimaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSecondaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTertiaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEncryptionEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApFailoverPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTelnetEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSshEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPreStdStateEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPwrInjectorStateEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPwrInjectorSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPwrInjectorSwMacAddr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApMonitorModeOptimization
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApDomainName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApNameServerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApAMSDUEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEncryptionSupported
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApRogueDetectionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTcpMss
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp11nChannelBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomFirstChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomSecondChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomThirdChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomFourthChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLegacyBeamForming
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCdpOverAirEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApDot11IfAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEthernetIfAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEthernetIfCdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialGlobalUserName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialGlobalPassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialGlobalSecret
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLinkLatencyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLinkLatencyReset
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCountryCode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApIfRegulatoryDomainMismatchNotifEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApCrashEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApUnsupportedEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApAssociatedEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPrimaryDiscoveryTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApFastHbTimerTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApFastHbTimerEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalPrimaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalSecondaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalPrimaryControllerName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalSecondaryControllerName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalPrimaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalSecondaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalFailoverPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalTcpMss
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalDot11IfCdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalEthernetIfCdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanIfMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanIfEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanIfNativeVlanId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPrimaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSecondaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTertiaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobal802dot1xAuthenticationEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobal802dot1xSupplicantPassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobal802dot1xSupplicantUsername
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp802dot1xSupplicantOverrideEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp802dot1xSupplicantOverrideUsername
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp802dot1xSupplicantOverridePassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApNwTxPowerThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialUserName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialPassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialSecret
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialEnableGlobalCredentials
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanListRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoLwappApMIBCompliances 8 }
ciscoLwappApMIBComplianceRev8 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoLwappApMIB module."
MODULE -- this module
MANDATORY-GROUPS {
ciscoLwappApGroup,
ciscoLwappApIfGroup,
ciscoLwappApGroupSup1,
ciscoLwappApGroupSup2,
ciscoLwappApGroupSup3,
ciscoLwappApNotifObjsGroup,
ciscoLwappApNotifsGroupVer1,
ciscoLwappApGroupSup6,
ciscoLwappApGroupSup7,
ciscoLwappApEthernetIfGroup,
ciscoLwappApRadioGroup,
ciscoLwappApGroupSup5,
ciscoLwappSeClientSup,
ciscoLwappDot11IfAntennaGroup,
ciscoLwappRetransmitGroup,
ciscoLwappApNotifsGroupVer2,
ciscoLwappApGroupSup8,
ciscoLwappApGroupSup9,
ciscoLwappApRadioGroupSup1,
ciscoLwappHaloBleGroup,
ciscoLwappApBleBeaconGroup,
ciscoLwappApLanStatsGroup,
ciscoLwappApGroupSup10,
ciscoLwappApXorRadioGroup,
ciscoLwappApNotifsXorGroup,
ciscoLwappApProfileHaloBleGroup,
ciscoLwappApProfileGroup,
ciscoLwappApPacketCaptureProfileGroup,
ciscoLwappApPacketCaptureClientProfileGroup
}
OBJECT cLApDot11IfAntennaEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApRetransmitCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApRetransmitTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalRetransmitCount
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalRetransmitTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPrimaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSecondaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTertiaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEncryptionEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApFailoverPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTelnetEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSshEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPreStdStateEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPwrInjectorStateEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPwrInjectorSelection
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPwrInjectorSwMacAddr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApMonitorModeOptimization
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApDomainName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApNameServerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApAMSDUEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEncryptionSupported
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApRogueDetectionEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTcpMss
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp11nChannelBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomFirstChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomSecondChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomThirdChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLomFourthChannel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLegacyBeamForming
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCdpOverAirEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApDot11IfAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEthernetIfAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApEthernetIfCdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialGlobalUserName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialGlobalPassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialGlobalSecret
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLinkLatencyEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApLinkLatencyReset
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCountryCode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApIfRegulatoryDomainMismatchNotifEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApCrashEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApUnsupportedEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ciscoLwappApAssociatedEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPrimaryDiscoveryTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApFastHbTimerTimeout
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApFastHbTimerEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalPrimaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalSecondaryControllerAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalPrimaryControllerName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalSecondaryControllerName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalPrimaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalSecondaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalFailoverPriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalTcpMss
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalDot11IfCdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobalEthernetIfCdpEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanIfMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanIfEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanIfNativeVlanId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApPrimaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSecondaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApTertiaryControllerAddressType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobal802dot1xAuthenticationEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobal802dot1xSupplicantPassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApGlobal802dot1xSupplicantUsername
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp802dot1xSupplicantOverrideEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp802dot1xSupplicantOverrideUsername
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp802dot1xSupplicantOverridePassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApNwTxPowerThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialUserName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialPassword
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialSecret
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApCredentialEnableGlobalCredentials
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApVlanListRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLAp11ChannelBandwidth
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApSecureCipher
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApAntennaBandMode
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconMajorField
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconMinorField
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconTxPower
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconUuid
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconApplyGlobal
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cLApBleBeaconAdvTxPower
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoLwappApMIBCompliances 9 }
-- ********************************************************************
-- * Units of conformance
-- ********************************************************************
ciscoLwappApGroup OBJECT-GROUP
OBJECTS {
cLApIfMacAddress,
cLApMaxNumberOfDot11Slots,
cLApIfSmtDot11Bssid
}
STATUS current
DESCRIPTION
"This collection of objects represents the information
about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 1 }
ciscoLwappApIfGroup OBJECT-GROUP
OBJECTS { cLApDot11IfType }
STATUS current
DESCRIPTION
"This collection of objects represents the information
about the dot11 interfaces of those APs that have
joined the controller."
::= { ciscoLwappApMIBGroups 2 }
ciscoLwappApGroupSup1 OBJECT-GROUP
OBJECTS { cLApEntPhysicalIndex }
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 3 }
ciscoLwappApGroupSup2 OBJECT-GROUP
OBJECTS { cLApName }
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
name associated with those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 4 }
ciscoLwappApGroupSup3 OBJECT-GROUP
OBJECTS {
cLApDot11IfRegDomain,
cLApDot11nSupport,
cLAp11nChannelBandwidth,
cLApCountryCode,
cLApCountryAllowed
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
country and 802.11n related information for those APs
that have joined the controller."
::= { ciscoLwappApMIBGroups 5 }
ciscoLwappApNotifObjsGroup OBJECT-GROUP
OBJECTS { cLApAssocFailureReason }
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information carried by the AP related notifications
sent by the agent to a network management station."
::= { ciscoLwappApMIBGroups 6 }
ciscoLwappApNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoLwappApIfRegulatoryDomainMismatchNotif,
ciscoLwappApUnsupported,
ciscoLwappApCrash,
ciscoLwappApAssociated
}
STATUS deprecated
DESCRIPTION
"This supplemental collection of objects represents the
AP related notifications sent by the agent to a network
management station.
ciscoLwappApNotifsGroup object is superseded by
ciscoLwappApNotifsGroupVer1."
::= { ciscoLwappApMIBGroups 7 }
ciscoLwappApGroupSup4 OBJECT-GROUP
OBJECTS {
cLApUpTime,
cLLwappUpTime,
cLLwappJoinTakenTime,
cLApMaxNumberOfEthernetSlots,
cLApPrimaryControllerAddressType,
cLApPrimaryControllerAddress,
cLApSecondaryControllerAddressType,
cLApSecondaryControllerAddress,
cLApTertiaryControllerAddressType,
cLApTertiaryControllerAddress,
cLApLomEnabled,
cLApLomFirstChannel,
cLApLomSecondChannel,
cLApLomThirdChannel,
cLApLomFourthChannel,
cLApCredentialGlobalUserName,
cLApCredentialGlobalPassword,
cLApCredentialGlobalSecret,
cLApCredentialUserName,
cLApCredentialPassword,
cLApCredentialSecret,
cLApCredentialEnableGlobalCredentials,
cLApFastHbTimerTimeout,
cLApFastHbTimerEnabled,
cLApPrimaryDiscoveryTimeout,
cLApGlobalPrimaryControllerAddressType,
cLApGlobalPrimaryControllerAddress,
cLApGlobalPrimaryControllerName,
cLApGlobalSecondaryControllerAddressType,
cLApGlobalSecondaryControllerAddress,
cLApGlobalSecondaryControllerName,
ciscoLwappApIfRegulatoryDomainMismatchNotifEnabled,
ciscoLwappApCrashEnabled,
ciscoLwappApUnsupportedEnabled,
ciscoLwappApAssociatedEnabled,
cLApLastRebootReason,
cLApPrimedDiscoveryTimeout,
cLApExtensionChannel,
cLAdjChannelRogueEnabled,
cLApWipsEnable,
cLApNwLegacyBeamForming,
cLApProfileFastHbTimerEnabled
}
STATUS deprecated
DESCRIPTION
"This supplemental collection of objects represents the
information for those APs that have joined the controller.
ciscoLwappApGroupSup4 object is superseded by
ciscoLwappApGroupSup6."
::= { ciscoLwappApMIBGroups 8 }
ciscoLwappApEthernetIfGroup OBJECT-GROUP
OBJECTS {
cLApEthernetIfName,
cLApEthernetIfMacAddress,
cLApEthernetIfAdminStatus,
cLApEthernetIfOperStatus,
cLApEthernetIfRxUcastPkts,
cLApEthernetIfRxNUcastPkts,
cLApEthernetIfTxUcastPkts,
cLApEthernetIfTxNUcastPkts
}
STATUS current
DESCRIPTION
"This collection of objects represents the information
about the Ethernet interfaces of those APs that have
joined the controller."
::= { ciscoLwappApMIBGroups 9 }
ciscoLwappApRadioGroup OBJECT-GROUP
OBJECTS {
cLApDot11RadioMACAddress,
cLApDot11RadioSubBand,
cLApDot11RadioVersion,
cLApDot11IsBackhaul,
cLApDot11RadioRole,
cLApDot11RadioMode,
cLApDot11RadioSubType
}
STATUS current
DESCRIPTION
"This collection of objects represents the information
about the Radios of those APs that have
joined the controller."
::= { ciscoLwappApMIBGroups 10 }
ciscoLwappApGroupSup5 OBJECT-GROUP
OBJECTS {
cLApGlobalFailoverPriority,
cLApFailoverPriority,
cLApEncryptionEnable,
cLApLinkLatencyEnable,
cLApLinkLatencyReset,
cLApLinkLatencyStatsCurrent,
cLApLinkLatencyStatsMin,
cLApLinkLatencyStatsMax,
cLApLinkLatencyTimeStamp
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents
objects related to encryption and link latency of
AP."
::= { ciscoLwappApMIBGroups 11 }
ciscoLwappSeClientSup OBJECT-GROUP
OBJECTS {
cLApSeClientUserName,
cLApSeClientIPAddrType,
cLApSeClientIPAddr,
cLApSeClientDuration,
cLApSeClientPort
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
Spectrum Expert client details connected to the APs."
::= { ciscoLwappApMIBGroups 12 }
ciscoLwappDot11IfAntennaGroup OBJECT-GROUP
OBJECTS { cLApDot11IfAntennaEnable }
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
antenna details corresponding to the dot11 interface of the
Access Points."
::= { ciscoLwappApMIBGroups 13 }
ciscoLwappRetransmitGroup OBJECT-GROUP
OBJECTS {
cLApRetransmitCount,
cLApRetransmitTimeout,
cLApGlobalRetransmitCount,
cLApGlobalRetransmitTimeout
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
retransmit parameters corresponding to the fallback of an
AccessPoint to another controller during failover."
::= { ciscoLwappApMIBGroups 14 }
ciscoLwappApGroupSup6 OBJECT-GROUP
OBJECTS {
cLApUpTime,
cLLwappUpTime,
cLLwappJoinTakenTime,
cLApMaxNumberOfEthernetSlots,
cLApPrimaryControllerAddressType,
cLApPrimaryControllerAddress,
cLApSecondaryControllerAddressType,
cLApSecondaryControllerAddress,
cLApTertiaryControllerAddressType,
cLApTertiaryControllerAddress,
cLApLomFirstChannel,
cLApLomSecondChannel,
cLApLomThirdChannel,
cLApLomFourthChannel,
cLApCredentialGlobalUserName,
cLApCredentialGlobalPassword,
cLApCredentialGlobalSecret,
cLApCredentialUserName,
cLApCredentialPassword,
cLApCredentialSecret,
cLApCredentialEnableGlobalCredentials,
cLApFastHbTimerTimeout,
cLApFastHbTimerEnabled,
cLApPrimaryDiscoveryTimeout,
cLApGlobalPrimaryControllerAddressType,
cLApGlobalPrimaryControllerAddress,
cLApGlobalPrimaryControllerName,
cLApGlobalSecondaryControllerAddressType,
cLApGlobalSecondaryControllerAddress,
cLApGlobalSecondaryControllerName,
ciscoLwappApIfRegulatoryDomainMismatchNotifEnabled,
ciscoLwappApCrashEnabled,
ciscoLwappApUnsupportedEnabled,
ciscoLwappApAssociatedEnabled,
cLApLastRebootReason,
cLApPrimedDiscoveryTimeout,
cLApGlobalPreferMode
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
global and credential information for those APs
that have joined the controller."
::= { ciscoLwappApMIBGroups 15 }
ciscoLwappApNotifsGroupVer1 NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoLwappApIfRegulatoryDomainMismatchNotif,
ciscoLwappApUnsupported,
ciscoLwappApAssociated
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
AP related notifications sent by the agent to a network
management station."
::= { ciscoLwappApMIBGroups 16 }
ciscoLwappApGroupSup7 OBJECT-GROUP
OBJECTS {
cLApTelnetEnable,
cLApSshEnable,
cLApPreStdStateEnabled,
cLApPwrInjectorStateEnabled,
cLApPwrInjectorSelection,
cLApPwrInjectorSwMacAddr,
cLApMonitorModeOptimization,
cLApDomainName,
cLApNameServerAddress,
cLApAMSDUEnable,
cLApEncryptionSupported,
cLApRogueDetectionEnabled,
cLApTcpMss,
cLApAdminStatus,
cLApCdpOverAirEnabled,
cLApDot11IfAdminStatus,
cLApEthernetIfCdpEnabled,
cLApGlobalTcpMss,
cLApGlobalDot11IfCdpEnabled,
cLApGlobalEthernetIfCdpEnabled,
cLApVlanIfMode,
cLApVlanIfEnable,
cLApVlanIfNativeVlanId,
cLApGlobal802dot1xAuthenticationEnabled,
cLApGlobal802dot1xSupplicantPassword,
cLApGlobal802dot1xSupplicantUsername,
cLApGlobal802dot1xSupplicantEapType,
cLAp802dot1xSupplicantOverrideEnabled,
cLAp802dot1xSupplicantOverrideUsername,
cLAp802dot1xSupplicantOverridePassword,
cLAp802dot1xSupplicantOverrideEapType,
cLApNwTxPowerThreshold,
cLApVlanListRowStatus
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 17 }
ciscoLwappApGroupSup8 OBJECT-GROUP
OBJECTS {
cLApDot11acSupport,
cLAp11ChannelBandwidth,
cLApExtensionChannels,
cLApGlobalMaxApsSupported,
cLApAuthorizeApMacAuth,
cLApAuthorizeApSerialNumAuth,
cLApAuthorizeApMethodList
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 18 }
ciscoLwappApNotifsGroupVer2 NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoLwappApPower,
ciscoLwappApRogueApDetected,
ciscoLwappApRogueApCleared,
ciscoLwappApWipsNotification,
ciscoLwappApNoDownlinkChannelNotify,
ciscoLwappApIfUpNotify,
ciscoLwappApIfDownNotify,
ciscoLwappRadioBandChangeNotify,
ciscoLwappApModeUnsupportedOnFlexExpressEvent,
ciscoLwappXmFilterCheckWarning,
ciscoLwappApSystemBootupEvent,
ciscoLwappApCapwapRetransmissionQueueFullEvent,
ciscoLwappApCurrChannelChanged,
ciscoLwappApSsidKeyConflict,
ciscoLwappApAcTimeSyncFailureTrap,
ciscoLwappApMonitorModeChangeNotify,
ciscoLwappApCurrentChannelRogueCleared,
ciscoLwappApCurrentChannelRogueDetected,
ciscoLwappApRogueDetected,
ciscoLwappApAdjChannelRogueCleared,
ciscoLwappApAdjChannelRogueDetected,
ciscoLwappApMaxClientLimitNotify,
ciscoLwappApMemoryUsageHigh,
ciscoLwappApCpuUsageHigh,
ciscoLwappApUpgradeFailureNotify,
ciscoLwappApClientThresholdNotify
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
AP related notifications sent by the agent to a network
management station."
::= { ciscoLwappApMIBGroups 19 }
ciscoLwappApGroupSup9 OBJECT-GROUP
OBJECTS {
cLApSecureCipher,
cLApAntennaBandMode
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 20 }
ciscoLwappApRadioGroupSup1 OBJECT-GROUP
OBJECTS {
cLApDot11RadioMode,
cLApDot11RadioSubType
}
STATUS current
DESCRIPTION
"This collection of objects represents the information
about the Radios of those APs that have
joined the controller."
::= { ciscoLwappApMIBGroups 21 }
ciscoLwappHaloBleGroup OBJECT-GROUP
OBJECTS {
cLHaloGlobalBleBeaconInterval,
cLHaloGlobalBleBeaconUuid,
cLHaloGlobalBleBeaconTxPower,
cLHaloGlobalBleBeaconEnable
}
STATUS current
DESCRIPTION
"This collection contains BLE global configuration which lists
the BLE beacon's identification number and attenuation value
of HALO APs that have joined the controller."
::= { ciscoLwappApMIBGroups 22 }
ciscoLwappApBleBeaconGroup OBJECT-GROUP
OBJECTS {
cLApBleBeaconMajorField,
cLApBleBeaconMinorField,
cLApBleBeaconTxPower,
cLApBleBeaconStatus,
cLApBleBeaconUuid,
cLApBleBeaconInterval,
cLApBleBeaconApplyGlobal,
cLApBleBeaconAdvTxPower
}
STATUS current
DESCRIPTION
"This collection represents BLE beacon's AP specific
configuration for HALO APs that have joined the controller."
::= { ciscoLwappApMIBGroups 23 }
ciscoLwappApLanStatsGroup OBJECT-GROUP
OBJECTS {
cLApLanPortState,
cLApLanPortVlanId,
cLApLanPortVlanIdValid,
cLApLanPoeState,
cLApLanOverride
}
STATUS current
DESCRIPTION
"This collection represents Sardinia AP LAN stats
information that have joined the controller."
::= { ciscoLwappApMIBGroups 24 }
ciscoLwappApGroupSup10 OBJECT-GROUP
OBJECTS {
cLApPowerStatus,
cLApNameServerAddressType,
cLApDataEncryptionStatus,
cLApNsiKey,
cLApPortNumber,
cLApVenueConfigVenueGroup,
cLApVenueConfigVenueType,
cLApVenueConfigVenueName,
cLApVenueConfigLanguage,
cLApLEDState,
cLApRealTimeStatsModeEnabled,
cLApTrunkVlan,
cLApTrunkVlanStatus,
cLApLocation,
cLApSubMode,
cLApAssocCount,
cLApAssocFailResourceCount,
cLApAssociatedClientCount,
cLApMemoryCurrentUsage,
cLApMemoryAverageUsage,
cLApCpuCurrentUsage,
cLApCpuAverageUsage,
cLApUpgradeFromVersion,
cLApUpgradeToVersion,
cLApUpgradeFailureCause,
cLApMaxClientLimitNumberTrap,
cLApMaxClientLimitCause,
cLApMaxClientLimitSet,
cLApFloorLabel,
cLApConnectCount,
cLApReassocSuccCount,
cLApReassocFailCount,
cLApAssocFailCountByRate,
cLApAbnormalOfflineCount,
cLApActiveClientCount,
cLApAssocFailCountForRssiLow,
cLApSysNetId,
cLApAssocFailTimes,
cLApHeartBeatRspAvgTime,
cLApEchoRequestCount,
cLApEchoResponseLossCount,
cLApModuleInserted,
cLApEnableModule,
cLApIsUniversal,
cLApUniversalPrimeStatus,
cLApIsMaster,
cLApBleFWDownloadStatus,
cLApDot11XorDartConnectorStatus,
cLApDot11IfAntennaTxEnable,
cLApDot11IfAntennaRxEnable,
cLApEthernetIfDuplex,
cLApEthernetIfLinkSpeed,
cLApEthernetIfPOEPower,
cLApEthernetIfRxTotalBytes,
cLApEthernetIfTxTotalBytes,
cLApEthernetIfInputCrc,
cLApEthernetIfInputAborts,
cLApEthernetIfInputErrors,
cLApEthernetIfInputFrames,
cLApEthernetIfInputOverrun,
cLApEthernetIfInputDrops,
cLApEthernetIfInputResource,
cLApEthernetIfUnknownProtocol,
cLApEthernetIfRunts,
cLApEthernetIfGiants,
cLApEthernetIfThrottle,
cLApEthernetIfResets,
cLApEthernetIfOutputCollision,
cLApEthernetIfOutputNoBuffer,
cLApEthernetIfOutputResource,
cLApEthernetIfOutputUnderrun,
cLApEthernetIfOutputErrors,
cLApEthernetIfOutputTotalDrops,
cLApDataLinkLatencyStatsCurrent,
cLApDataLinkLatencyStatsMin,
cLApDataLinkLatencyStatsMax,
cLApDataLinkLatencyTimeStamp,
cLApCtsSxpDefaultPassword,
cLApCtsSxpState,
cLApCtsSxpMode,
cLApCtsSxpListenerMinHoldtime,
cLApCtsSxpListenerMaxHoldtime,
cLApCtsSxpReconcilePeriod,
cLApCtsSxpRetryPeriod,
cLApCtsSxpSpeakerHoldTime,
cLApCtsSxpSpeakerKeepAlive,
cLApCtsInlineTagStatus,
cLApCtsSgaclStatus,
cLApCtsOverrideStatus,
cLApModeClear,
cLApSiteTagName,
cLApRfTagName,
cLApPolicyTagName,
cLApTagSource,
cLApUsbModuleName,
cLApUsbModuleState,
cLApUsbModuleProductId,
cLApUsbDescription,
cLApUsbStateInfo,
cLApUsbOverride,
cLApUsbSerialNumber,
cLApUsbMaxPower,
cLApLegacyBeamForming,
cLApDot11IfLinkChangeCount,
cLApDot11MaxClients,
cLApPromiscuousModeDwelling,
cLApDot11IfStaKeepingTime,
cLApDot11IfLinkSpeed,
cLApDot11IfMtu,
cLApDot11IfDesc,
cLAPDot11IfMinTxPowerStep,
cLApDot11IfMaxDataRate,
cLApEthernetIfMtu,
cLApEthernetIfType,
cLApEthernetIfLinkChangeCount,
cLApWlanStatsTxPktNum,
cLApWlanStatsTxOctetNum,
cLApWlanStatsRxPktNum,
cLApWlanStatsRxOctetNum,
cLApWlanStatsRetransmitNum,
cLApWlanStatsAssocClientNum,
cLApWlanStatsOnlineUserNum,
cLApHyperlocationAdminState,
cLApHyperlocationUnsetFlag,
cLApOeapDisableLocalAccess,
cLApGlobalLEDState,
cLApRadioInterfaceShutdownEnabled,
cLApEthernetInterfaceDowntime,
cLAPMulticastGroupAddressType,
cLAPMulticastGroupAddress,
cLAPMulticastMode,
cLApGlobalAPLagCapability,
cLApGlobalAPDtlsVersion,
cLApGlobalAPDtlsCipherSuite,
cLApWlanInfoMaxClients,
cLApRadioWlanSsid,
cLApRadioWlanBssid,
cLApNwTxPowerThresholdVer2,
cLApDot11RadioStatsRxErrorFrameCount,
cLApDot11RadioStatsMacMicErrFrameCount,
cLApDot11RadioStatsMacDecryptErrFrameCount,
cLApDot11RadioStatsRxMgmtFrameCount,
cLApDot11RadioStatsRxCtrlFrameCount,
cLApDot11RadioStatsRxDataFrameCount,
cLApDot11RadioStatsTxMgmtFrameCount,
cLApDot11RadioStatsTxCtrlFrameCount,
cLApDot11RadioStatsTxDataFrameCount,
cLApDot11RadioStatsRxDataPacketCount,
cLApDot11RadioStatsTxDataPacketCount,
cLApDot11RadioStatsTxDataPacketCount,
cLApDot11RadioStatsRetryFrameCount,
cLApDot11RadioStatsRetryPacketCount,
cLApDot11RadioRssiHighest,
cLApDot11RadioRssiLowest,
cLApDot11RadioRssiAverage,
cLApCrashFileName,
cLApCrashFileSize,
cLApCrashFileTimeStamp,
cLApLEDFlashStatus,
cLApLEDFlashDuration,
cLApInetAddressType,
cLApInetAddress,
cLApStaticIpv6AddressEnabled,
cLApStaticIpv6InetAddressType,
cLApStaticIpv6InetAddress,
cLApStaticIpv6PrefixLength,
cLApStaticIpv6GatewayInetAddressType,
cLApStaticIpv6GatewayInetAddress,
cLApStaticIpNetmaskType,
cLApStaticIpNetmask,
cLApPreferMode,
cLApPreferModeApplied,
cLApSysMemType,
cLApSysMemSize,
cLApSysFlashSize,
cLApSysCpuType,
cLApSysFlashType,
cLApDot11RadioRateStatsRxPackets,
cLApDot11RadioRateStatsRxBytes,
cLApDot11RadioRateStatsTxPackets,
cLApDot11RadioRateStatsTxBytes,
cLApDot11RadioRateString,
cLApPacketDumpFtpServerAddressType,
cLApPacketDumpFtpServerAddress,
cLApPacketDumpFtpServerPath,
cLApPacketDumpFtpUsername,
cLApPacketDumpFtpPassword,
cLApPacketDumpClassifier,
cLApPacketDumpBufferSize,
cLApPacketDumpCaptureTime,
cLApPacketDumpTruncation,
cLApPacketDumpApName,
cLApPacketDumpDeviceMacAddress,
cLApPacketDumpStartStop,
cLApDot11RadioSsidName,
cLApCmMacAddress,
cLApCmApMacAddress,
cLApCmSwVersion,
cLApEthernetSpeed,
cLApEthernetStatus,
cLApCmStatus,
cLApCmSerialNumber,
cLApCmUsChannelStatus,
cLApCmDsChannelStatus,
cLApCmMaskBit,
cLApEnvTemperatureDegree,
cLApEnvTemperatureState,
cLApEnvOrientation,
cLApEnvPoeOutStatus,
cLApGpsLocationPresent,
cLApGpsLocationValid,
cLApGpsLatitude,
cLApGpsLongitude,
cLApGpsAltitude,
cLApGpsCollectionTime,
cLApRogueApMacAddress,
cLApDot11RadioChannelNumber,
cLApRogueApSsid,
cLApRogueType,
cLApWipsReason,
cLApWipsClear,
cLApIfUpDownFailureType,
cLApIfUpDownCause,
cLApIfUpDownFailureCode,
cLApAlarmSet,
cLApRogueClassType,
cLApRogueDetectedChannel,
cLApRSSI,
cLApSNR,
cLApDot11RadioCurrentChannel,
cLApAdhocRogue,
cLApRogueAPOnWiredNetwork,
cLApRogueMode,
cLApRogueIsClassifiedByRule,
cLApRogueClassifiedApMacAddress,
cLApRogueClassifiedRSSI,
cLAPPreviousMonitorMode,
cLAPCurrentMonitorMode,
cLApSsidKeyConfSsidA,
cLApSsidKeyConfKeyIdxA,
cLApSsidKeyConfSsidB,
cLApSsidKeyConfKeyIdxB,
cLApPreviousChannel,
cLApCurrentChannel,
cLApChannelCustomize,
cLApIfLoadChannelUtilization,
cLAPGroupVlanName,
cLApRuleName,
cLApSeverityScore,
cLApDot11XorRadioRoleChangeReason,
cLApDot11XorRadioBandChangeReason
}
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 25 }
ciscoLwappApXorRadioGroup OBJECT-GROUP
OBJECTS {
cLApDot11XorRadioMode,
cLApDot11XorRadioBand,
cLApDot11XorRadioRoleAssignment,
ciscoLwappXorRadioRoleChangeEnabled,
cLApDot11IfSensorReachability,
cLApFraCoverageOverlapFactor,
cLApFraSuggestedMode
}
STATUS current
DESCRIPTION
"This collection of objects represents the information
about the Xor Radios of those APs that have
joined the controller."
::= { ciscoLwappApMIBGroups 26 }
ciscoLwappApNotifsXorGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoLwappApXorRadioRoleChangeNotify }
STATUS current
DESCRIPTION
"This collection of objects represents the XOR radio
related notifications sent by the agent to a network
management station."
::= { ciscoLwappApMIBGroups 27 }
ciscoLwappApGroupSup11 OBJECT-GROUP
OBJECTS { cLApDot11axSupport }
STATUS current
DESCRIPTION
"This supplemental collection of objects represents the
information about the general attributes and functional
parameters of those APs that have joined the
controller."
::= { ciscoLwappApMIBGroups 28 }
ciscoLwappApProfileHaloBleGroup OBJECT-GROUP
OBJECTS {
cLApProfileHaloBleBeaconInterval,
cLApProfileHaloBleBeaconTxPower,
cLApProfileHaloBleBeaconEnabled,
cLApProfileHaloBleBeaconUuid,
cLApProfileHaloBleBeaconTxPower,
cLApProfileHaloBleBeaconEnabled,
cLApProfileHaloBleBeaconAdvertisedPwr
}
STATUS current
DESCRIPTION
"This collection contains HALO BLE beacon configuration for a
specific AP profile. It lists the HALO BLE beacon ID, UUID,
transmission power, and status per beacon for HALO enabled APs
that have joined the controller."
::= { ciscoLwappApMIBGroups 29 }
ciscoLwappApProfileGroup OBJECT-GROUP
OBJECTS {
cLApProfileRowStatus,
cLApProfileCredentialGlobalUserName,
cLApProfileCredentialGlobalPassword,
cLApProfileCredentialGlobalSecret,
cLApProfileCredentialEnableGlobalCredentials,
cLApProfileLinkLatencyEnable,
cLApProfileHaloBleBeaconInterval,
cLApProfileFastHbTimerTimeout,
cLApProfilePrimaryDiscoveryTimeout,
cLApProfileBackupPrimaryControllerAddressType,
cLApProfileBackupPrimaryControllerAddress,
cLApProfileBackupPrimaryControllerName,
cLApProfileBackupSecondaryControllerAddressType,
cLApProfileBackupSecondaryControllerAddress,
cLApProfileBackupSecondaryControllerName,
cLApProfileBackupTertiaryControllerAddressType,
cLApProfileBackupTertiaryControllerAddress,
cLApProfileBackupTertiaryControllerName,
cLApProfileTcpMss,
cLApProfileRetransmitCount,
cLApProfileRetransmitTimeout,
cLApProfileOeapDisableLocalAccess,
cLApProfileLedState,
cLApProfileRadioInterfaceShutdownEnabled,
cLApProfileEthernetInterfaceDowntime,
cLApProfileMulticastGroupAddressType,
cLApProfileMulticastGroupAddress,
cLApProfileMulticastMode,
cLApProfilePrimedJoinTimeout,
cLApProfilePreferMode,
cLApProfileApLagEnabled,
cLApProfile802dot1xAuthenticationEnabled,
cLApProfile802dot1xSupplicantUsername,
cLApProfile802dot1xSupplicantPassword,
cLApProfileEncryptionEnable,
cLApProfileTelnetEnable,
cLApProfileSshEnable,
cLApProfileHyperlocationEnable,
cLApProfileHyperlocationDetectionThreshold,
cLApProfileHyperlocationResetThreshold,
cLApProfileHyperlocationTriggerThreshold,
cLApProfileHyperlocationNtpIpAddressType,
cLApProfileHyperlocationNtpIpAddress,
cLApProfileAdjustMss,
cLApProfileDiscoveryTimeout,
cLApProfileHeartBeatTimeout,
cLApProfileCdpEnable,
cLApProfileApPacketCaptureProfile,
cLApProfileRogueReportInterval,
cLApProfileRogueMinimumRssi,
cLApProfileRogueTransientInterval,
cLApProfileRogueContainFlexconnect,
cLApProfileRogueContainAutoRateEnable,
cLApProfileRogueDetectionEnable,
cLApProfileReportInterval24ghz,
cLApProfileReportInterval5ghz,
cLApProfileDot1xApSwitchEapAuth,
cLApProfileDot1xApSwtichLscAuth,
cLApProfileMeshProfileName,
cLApProfileUsbStatus,
cLApProfileVlanTagging,
cLApProfileApCountryCode,
cLApProfileExtModuleEnable,
cLApProfileStatsTimer,
cLApProfilePoePreStandardSwitchFlag,
cLApProfilePoePowerInjectorSelection,
cLApProfilePoeInjectorSwitchMac,
cLApProfileHaloBleBeaconAdvertisedPwr,
cLApProfileTftpDownGradeAddressType,
cLApProfileTftpDownGradeAddress,
cLApProfileTftpDownGradeFileName,
cLApProfileCoreDumpType,
cLApProfileCoreDumpTftpAddressType,
cLApProfileCoreDumpTftpAddress,
cLApProfileCoreDumpCoreFileName,
cLApProfileBackupFallbackEnabled
}
STATUS current
DESCRIPTION
"This collection contains the information about the credentials
of the 802.11 LWAPP Access Point that have joined the
Controller"
::= { ciscoLwappApMIBGroups 30 }
ciscoLwappApPacketCaptureProfileGroup OBJECT-GROUP
OBJECTS {
cLApPacketCaptureProfileRowStatus,
cLApPacketCaptureProfileBufferSize,
cLApPacketCaptureProfileDuration,
cLApPacketCaptureProfileTruncation,
cLApPacketCaptureProfileFtpServerAddressType,
cLApPacketCaptureProfileFtpServerAddress,
cLApPacketCaptureProfileFtpServerPath,
cLApPacketCaptureProfileFtpUsername,
cLApPacketCaptureProfileFtpPassword,
cLApPacketCaptureProfileClassifierArp,
cLApPacketCaptureProfileClassifierBroadcast,
cLApPacketCaptureProfileClassifierControl,
cLApPacketCaptureProfileClassifierData,
cLApPacketCaptureProfileClassifierDot1x,
cLApPacketCaptureProfileClassifierIapp,
cLApPacketCaptureProfileClassifierIp,
cLApPacketCaptureProfileClassifierManagement,
cLApPacketCaptureProfileClassifierMulticast,
cLApPacketCaptureProfileClassifierTcp,
cLApPacketCaptureProfileClassifierUdp,
cLApPacketCaptureProfileClassifierTcpPort,
cLApPacketCaptureProfileClassifierUdpPort,
cLApPacketCaptureApDeviceMac,
cLApPacketCaptureApMacAddress,
cLApPacketCaptureApStatus
}
STATUS current
DESCRIPTION
"This collection contains the information about the packet
capture parameters of the 802.11 LWAPP Access Point that have
joined the Controller"
::= { ciscoLwappApMIBGroups 31 }
ciscoLwappApPacketCaptureClientProfileGroup OBJECT-GROUP
OBJECTS {
cLApPacketCaptureClientApMacAddress,
cLApPacketCaptureClientAutoMode,
cLApPacketCaptureClientStartStop,
cLApPacketCaptureClientSiteName,
cLApPacketCaptureClientRowStatus
}
STATUS current
DESCRIPTION
"This collection contains the information about the packet
capture parameters for per client basis for LWAPP Access Point
that have joined the Controller"
::= { ciscoLwappApMIBGroups 32 }
END
Reference in New Issue Copy Permalink